betaFeedback

WorksPhysics and Astronomy

Control of electron beam polarization in the bubble regime of laser-wakefield acceleration

Abstract

Electron beam polarization in the bubble regime of the interaction between a high-intensity laser and a longitudinally pre-polarized plasma is investigated by means of the Thomas-Bargmann-Michel-Telegdi equation. Using a test-particle model, the dependence of the accelerated electron polarization on the bubble geometry is analyzed in detail. Tracking the polarization dynamics of individual electrons reveals that although the spin direction changes during both the self-injection process and acceleration phase, the former has the biggest impact. For nearly spherical bubbles, the polarization of electron beam persists after capture and acceleration in the bubble. By contrast, for aspherical bubble shapes, the electron beam becomes rapidly depolarized, and the net polarization direction can even reverse in the case of a oblate spheroidal bubble. These findings are confirmed via particle-in-cell simulations.

Introduction

Laser wakefield acceleration (LWFA) has made remarkable progress since it was first proposed by Tajima and Dawson in 1979 [1] and experimentally realized through the rapid advancement of laser technology via chirped-pulse amplification (CPA) [2]. Since then, improved understanding of various schemes such as plasma beat wave acceleration [3], multiple laser pulses [4, 5], and self-modulated laser wakefield acceleration [6] have contributed to a series of milestones. Of particular note is the generation of quasimonoenergetic electron beams in the bubble regime [7], which triggered significant experimental progress and widespread interest [8, 9, 10]. In recent years, applications of wakefield acceleration have been actively pursued, such as synchrotron radiation sources [11, 12] and polarized particle beams [13, 14, 15].

Spin-polarized particle beams are widely used in nuclear and particle physics to study the interaction and structure of matter, and to test the standard model of particle physics [16, 17]. In particular, the structure of subatomic particles like protons or neutrons can be explored to get further insights into quantum chromodynamics [18] or to probe the nuclear spin structure [19]. Additionally, polarized particle beams are advantageous to achieve a deeper understanding of nuclear reactions [20], to investigate symmetry violations, to measure quantum numbers of new particles [16, 21, 22, 23], or to investigate molecular dynamics [24, 25]. In 2019, An et al. proposed to map electromagnetic field structures of plasmas by using a spin-polarized relativistic electron beam [26]. Recently, polarized multi-GeV proton beams produced by ultra-intense laser interactions were studied via simulations [27]. In contrast, a first polarization measurement of few-MeV laser accelerated protons reported a negative result, i.e. no polarization build-up during the acceleration process [28]. At present, the preparation of polarized electron beams mainly relies on spontaneous polarization in the magnetic fields of storage rings due to the emission of spin-flip synchrotron radiation, i.e. the well-known Sokolov-Ternov effect [29, 30]. This technique requires conventional particle accelerators that are typically very large in scale and budget [29].

The acceleration of polarized electron beams by means of laser-driven acceleration promises to be cost-efficient and highly effective. Despite many advances mostly on the theoretical side, several principal issues need to be addressed, for example: (i) is it possible to alter the polarization of an initially unpolarized target through interaction with relativistic laser pulses [31, 32, 33, 34, 35]? or (ii) are the spins so inert during the short acceleration period that a pre-polarized target is required [13, 14, 36, 37, 38]? Following the work by Hützen et al. [39], Wen et al. [13] have proposed to generate high-current polarized electron beams in the interaction of an ultra-intense laser pulse with a pre-polarized gas plasma, which is produced through photo-dissociation by a circularly polarized ultra-violet (UV) laser pulse [40]. The work of Vieira et al. showed that spin is depolarized mainly in the injection phase [41]. Previous works show that the distribution of the electromagnetic fields is affected by the accelerating bubble geometry [42, 43, 44]. It is thus likely that the self-injection process can be affected by the bubble shape [45, 46]. Moreover, the work of Qu et al. [47] indicates that the frequency of THz radiation generated by the shell electrons also depends on the bubble shape. In this paper, the evolution of the electron beam polarization injected into various shapes of ellipsoidal bubbles is discussed in detail, and it is found that the polarization of electron beams can be controlled by adjusting the bubble geometry. The results of our analysis are highly relevant to experimental implementations of polarized electron beams, such as those planned at the European EuPRAXIA facility [48].

Test-Particle Model

By choosing appropriate laser and plasma parameters, different shaped wakefield bubbles can be achieved [45]. A series of 2.5D particle-in-cell (PIC) simulation with the code EPOCH [49] was carried out to analyze the bubble geometry. The laser propagates in the xx-direction with linear polarization in the yy-direction and a Gaussian envelope

E=E0w0w(x)exp⁡(−y2+z2w2(x))exp⁡(−(kx−ωt)2(0.5τ)2)cos⁡(ϕ),(1)E = E_0 \frac{w_0}{w(x)} \exp\left(-\frac{y^2+z^2}{w^2(x)}\right) \exp\left(-\frac{(kx-\omega t)^2}{(0.5\tau)^2}\right)\cos(\phi), \tag*{(1)}

where, w(x)=w0[1+(x−x0)2/zR2]0.5w(x)=w_0[1+(x-x_0)^2/z_R^2]^{0.5}, with laser waist w0=10λw_0=10\lambda, pulse duration τ=21 fs\tau=21\,\mathrm{fs}, laser intensity a0=eE0/meωc=20a_0=eE_0/m_e\omega c=20 and wavelength λ=800 nm\lambda=800\,\mathrm{nm}. The x0=30λx_0=30\lambda is the position of the laser waist, and zR=πw02/λz_R=\pi w_0^2/\lambda is the Rayleigh length. The vacuum length was 30λ30\lambda and the laser beam was focused at the left edge of plasma. The simulation box is 140λ(x)×100λ(y)140\lambda(x)\times100\lambda(y) with resolution dx=λ/32\mathrm{d}x=\lambda/32 and dy=5dx\mathrm{d}y=5\mathrm{d}x. There were 16 pseudo-particles per cell. We define the aspect ratio η=R⊥/R∥\eta=R_{\perp}/R_{\parallel} to describe the shape of bubble, where R∥R_{\parallel} and R⊥R_{\perp} are the longitudinal and transverse radii respectively. Different R∥R_{\parallel} and R⊥R_{\perp} can be obtained by changing the plasma density for the same laser system [45]. Following this definition, η<1\eta<1 indicates a prolate spheroid, η=1\eta=1 indicates a sphere, and η>1\eta>1 indicates an oblate spheroid. For an initial plasma density of n0=0.011ncn_0=0.011n_c, we find that R∥=14.38λR_{\parallel}=14.38\lambda and R⊥=13.13λR_{\perp}=13.13\lambda. Consequently, the aspect ratio η=0.91<1\eta=0.91<1, represents a prolate spheroidal bubble.

The electromagnetic field distribution in a spherical bubble has already been theoretically and numerically studied [50, 51, 52]. Based on the work of Li et al. [44], the electromagnetic field of an ellipsoidal bubble can be written as

Ex=η2η2(1−vb2)+2ξ,(2)E_x=\frac{\eta^2}{\eta^2(1-v_b^2)+2}\xi, \tag*{(2)}
Ey=2−η2vb22η2(1−vb2)+4y,(3)E_y=\frac{2-\eta^2v_b^2}{2\eta^2(1-v_b^2)+4}y, \tag*{(3)}
Ez=2−η2vb22η2(1−vb2)+4z,(4)E_z=\frac{2-\eta^2v_b^2}{2\eta^2(1-v_b^2)+4}z, \tag*{(4)}
Bx=0,(5)B_x=0, \tag*{(5)}
By=vbη22η2(1−vb2)+4z,(6)B_y=\frac{v_b\eta^2}{2\eta^2(1-v_b^2)+4}z, \tag*{(6)}
Bz=−vbη22η2(1−vb2)+4y.(7)B_z=-\frac{v_b\eta^2}{2\eta^2(1-v_b^2)+4}y. \tag*{(7)}

where ξ=x−vbt\xi=x-v_bt, vb=1−γb−2v_b=\sqrt{1-\gamma_b^{-2}} is the bubble phase velocity and γb=0.45nc/n0\gamma_b=0.45\sqrt{n_c/n_0} [50, 53]. To confine the field distribution inside the bubble, a modified factor f(r)=[tanh⁡(R∥/d−r/d)+1]/2f(r)=[\tanh(R_{\parallel}/d-r/d)+1]/2 was used, r=ξ2+(y2+z2)/η2r=\sqrt{\xi^2+(y^2+z^2)/\eta^2} and dd is the width of the electron sheath. In this work, d=0.5d=0.5 was used. Here, we used dimensionless units, by normalizing the length to kpk_p, the velocity to cc, the electron density to n0n_0, the electric field to mecωp/em_e c\omega_p/e, and the magnetic field to meωp/em_e\omega_p/e.

Initially, the electron is at rest in front of the bubble with a position (x0,y0)(x_0,y_0). Considering a fully polarized plasma, the electron spin at initial time is aligned with in the bubble propagation direction (xx). To follow the trajectory of an electron in the bubble, a fourth-order Runge-Kutta method was adopted to numerically solve the relativistic Newton-Lorentz equation, dP/dt=−e[E+(P/γ)×B]\mathrm{d}\mathbf{P}/\mathrm{d}t=-e[\mathbf{E}+(\mathbf{P}/\gamma)\times\mathbf{B}], where γ=1−v2/c2\gamma=\sqrt{1-v^2/c^2} is the relativistic factor. Meanwhile, the spin precession of an electron in the electromagnetic field was calculated according to the Thomas-Bargmann-Michel-Telegdi (TBMT) equation [29] ds/dt=(ΩT+Ωa)×s\mathrm{d}\mathbf{s}/\mathrm{d}t=(\mathbf{\Omega}_T+\mathbf{\Omega}_a)\times\mathbf{s} with

ΩT=eme(1γB−1γ+11c2v×E),(8)\mathbf{\Omega}_T=\frac{e}{m_e}\left(\frac{1}{\gamma}\mathbf{B}-\frac{1}{\gamma+1}\frac{1}{c^2}\mathbf{v}\times\mathbf{E}\right), \tag*{(8)}
Ωa=aeeme(B−γγ+11c2(v⋅B)v−1c2v×E),(9)\mathbf{\Omega}_a=a_e\frac{e}{m_e}\left(\mathbf{B}-\frac{\gamma}{\gamma+1}\frac{1}{c^2}(\mathbf{v}\cdot\mathbf{B})\mathbf{v}-\frac{1}{c^2}\mathbf{v}\times\mathbf{E}\right), \tag*{(9)}

where ae≈1.16×10−3a_e\approx1.16\times10^{-3} is the anomalous magnetic moment of the electron and the spin is normalized to ∣s∣=1|\mathbf{s}|=1. The Boris-rotation method was adopted to numerically solve the TBMT equation [54].

Owing to the azimuthal symmetry of the wake magnetic field, the electron orbit and spin can be placed in the same plane [13, 50], so for simplicity the XYXY plane was adopted for this calculation. The simulation results of three typical cases are displayed in Figure 1. The aspect ratio of these bubbles were η=0.91\eta=0.91 in case 1, η=1.00\eta=1.00 in case 2 and η=1.09\eta=1.09 in case 3, representing prolate spheroidal, spherical and oblate spheroidal bubbles, respectively. The trajectory and the spin orientation of a typical electron are presented in Figure 1(aFigure 1–(aFigure 3. The motion of electrons can be divided into four stages: (i) t<tIt<t_{\mathrm{I}}, the electron does not feel the bubble field; (ii) tI<t<tIIt_{\mathrm{I}}<t<t_{\mathrm{II}}, the electron is located on the bubble shell and its spin rotates clockwise, such that sys_y decreases from 0 to almost −1-1 as shown in Figure 1(bFigure 1; (iii) tII<t<tIIIt_{\mathrm{II}}<t<t_{\mathrm{III}}, the electron reaches the tail of the bubble and its spin rotates counter-clockwise, and sys_y increases as revealed in Figure 1(bFigure 1; (iv) t>tIIIt>t_{\mathrm{III}}, the electron is captured in the bubble and its spin procession slows down.

Trajectories, spin orientation, and electron spin distributions for three cases

Figure 1. (color online) (a1, a2, a3) Trajectories (purple dots) and the spin (arrows) orientation of typical electrons in case 1 (η=0.91\eta= 0.91), case 2 (η=1.00\eta= 1.00) and case 3 (η=1.09\eta= 1.09), respectively. Initially, the electron located at the front of bubble and the spin is aligned with the propagation direction of laser. The colour of arrows indicates the electron energy. (b1, b2, b3) The electron trajectories of sxs_x and sys_y. (c1, c2, c3) The distribution of initial direction (sxs_x) and perpendicular direction (sys_y) for electron spin as a function of initial position y0y_0 at the end of acceleration stage. The dot color indicates the electron energy, and the injected electrons (γ>50\gamma> 50) are denoted as red dots. The radii of bubble (R⊥R_\perp and R∥R_\parallel) are obtained from PIC simulation, and the electron densities are n0=0.011ncn_0 = 0.011n_c, n0=0.0135ncn_0 = 0.0135n_c and n0=0.017ncn_0 = 0.017n_c respectively. The laser spot size, duration and intensity are: w0=10λw_0 = 10\lambda, τ=21 fs\tau= 21\,\mathrm{fs} and a0=20a_0 = 20.

Evolution of electron-beam polarization and transverse spin components

Figure 3. (color online) (a) Evolution of ⟨sx⟩\langle s_x\rangle for an accelerated electron beam in the bubble regime with different shapes (η\eta). (b) Dependence of ⟨sx⟩\langle s_x\rangle at the end of the acceleration phase as a function of bubble geometry (η\eta) with different laser intensity. The other laser parameters are same as in Figure 2. (c) sxs_x and sys_y as a function of y0y_0 at the end of acceleration stage for n0=0.020ncn_0=0.020n_c, η=1.04\eta=1.04 and a a0=30a_0=30 laser pulse. The electron energy is indicated by the dot colors.

The degree of electron spin precession differs for the three cases. The electrons can stay longer in the second stage with increasing η\eta, which means that the degree of clockwise rotation is largest for case 3 (η>1\eta> 1), where sxs_x approaches −1-1 as shown as Figure 1(bFigure 3. During the third stage, the degree of spin precession in the three cases is also different. In case 1 (η<1\eta< 1) and case 2 (η=1\eta= 1), sxs_x increases to 1 (its initial value) and decreases afterwards, while sys_y changes from negative to positive. In case 3 (η>1\eta> 1), the counter-clockwise spin precession is significantly smaller. Thus, sxs_x increases from −1-1 to a value near 0 and sys_y remains negative.

During the fourth stage t>tIIIt > t_{\mathrm{III}} the electrons remain in the acceleration phase and oscillate around the laser axis. The sxs_x and sys_y values oscillate around their values at t=tIIIt = t_{\mathrm{III}}, as shown in the inset of Figure 1(bFigure 1–(b3). Compared to the strong precession during the earlier stages, this spin variation can be ignored. This means that the spin procession for electrons mainly occurs during self-injection, and does not change significantly thereafter in the acceleration stage, and this result is consistent with the study of Wen et al. [13]. When the electron arrives at the centre of bubble, the acceleration process is terminated and the spin direction is similar to its value at t=tIIIt = t_{\mathrm{III}}, as revealed as insets of Figure 1(b1)–(b3). At this time, the final spin orientation is forward in case 1 (η<1\eta< 1), case 2 (η=1\eta= 1) and backward in case 3 (η>1\eta> 1). We can thus conclude that the spin precession is strongly affected by the bubble geometry. Moreover, during the electron injection, the clockwise spin rotation during the second stage is partly balanced by the counter-clockwise rotation of stage three. As a consequence, a particular ellipsoidal bubble shape can be chosen for which the electron spins can be restored to their initial orientation at t=tIIIt = t_{\mathrm{III}} and maintain dynamic stability over the acceleration phase.

The net polarization of a particle beam is defined as P=⟨sx⟩2+⟨sy⟩2+⟨sz⟩2P = \sqrt{\langle s_x\rangle^2 + \langle s_y\rangle^2 + \langle s_z\rangle^2}, where ⟨si⟩\langle s_i\rangle is the average value in each direction. This definition is a statistical average for an electron bunch. An accelerated electron beam can be mimicked by changing the initial position y0y_0 for a set of test particles. The trapping cross-section has been studied using the same method in a previous study [45]. The distributions of sxs_x and sys_y as a function of initial position y0y_0 at the end of acceleration stage are displayed in the Figure 1(c1)–(c3). The electrons are also distinguished according to their final energy, denoted by the colour scale. In 3D geometry, the injected electrons (γ>50\gamma> 50) are distributed in a ring. The accelerated electrons (red dots) are distributed from rmin⁡r_{\min} to rmax⁡r_{\max} in these three cases, which means that the electron charge is affected by the bubble geometry. More importantly, the spin direction of the accelerated electrons also depends on the bubble shape. The value of ⟨sx⟩\langle s_x\rangle of the electron beam can be calculated as,

⟨sx⟩=∑iNsxiN=∑rmin⁡rmax⁡sxi⋅2πy0δy0∑rmin⁡rmax⁡2πy0δy0(10)\langle s_x\rangle= \frac{\sum_{i}^{N}s_{xi}}{N} = \frac{\sum_{r_{\min}}^{r_{\max}}s_{xi}\cdot2\pi y_0\delta y_0}{\sum_{r_{\min}}^{r_{\max}}2\pi y_0\delta y_0} \tag*{(10)}

with δy0=0.01\delta y_0 = 0.01 in our simulation. Considering the azimuthal symmetry of the bubble field, we have ⟨sy⟩=⟨sz⟩=0\langle s_y\rangle= \langle s_z\rangle= 0 and P=∣⟨sx⟩∣P = |\langle s_x\rangle|. The polarization amounts to P=0.55P = 0.55, 0.700.70 and 0.090.09 for cases 1 (η<1\eta< 1), 2 (η=1\eta= 1) and 3 (η>1\eta> 1) from Figure 1, respectively.

3D PIC SIMULATIONS & DISCUSSION

To verify these findings we present results of 3D PIC simulations with a modified version of the EPOCH code [49], in which the TBMT equation for the study of electron and ion spins was implemented [27]. The laser parameters are the same as in Figure 1. The initial plasma density is n0=0.006ncn_0 = 0.006n_c and n0=0.015ncn_0 = 0.015n_c, respectively. The size of the moving window is 60λ(x)×40λ(y)×40λ(z)60\lambda(x) \times40\lambda(y) \times40\lambda(z) with resolutions dx=λ/32\mathrm{d}x = \lambda/32 and dy=dz=5dx\mathrm{d}y = \mathrm{d}z = 5\mathrm{d}x, and 8 pseudo-particles per cell.

As shown as in Figure 2(a) and (b), the simulated bubble shapes are prolate (n0=0.006ncn_0=0.006n_c) and oblate (n0=0.015ncn_0=0.015n_c), respectively. The distribution of ⟨sx⟩\langle s_x\rangle for the two cases are presented in Figure 2(c) and (d). The polarization of electrons, located at the tail of bubble, is positive (green arrows) for the prolate bubble (η=0.92\eta=0.92), while it is negative for the oblate case (η=1.21\eta=1.21). Thus, the results of our 3D PIC simulations verify the results of the test-particle simulations. Here, the electrons located at the shell of the bubble were analysed because of depolarization process mainly occurs before the electron arrives at the rear wall of the bubble. Moreover, the injection process and the evolution of bubble are also affected by the laser, effects which are not included in the earlier test-particle analysis. To further illustrate how the electron-beam polarization variation depends on the bubble geometry, we did a series of 2.5D PIC simulations with initial plasma densities ranging from n0=0.005ncn_0=0.005n_c to n0=0.025ncn_0=0.025n_c and fixed laser intensity a0=20a_0=20. Other parameters were the same as in Figure 1. The data of bubble geometry were substituted in the single electron dynamic simulations. The evolution curves of ⟨sx⟩\langle s_x\rangle with time are shown in Figure 3(a). Here, bubbles with six typical aspect ratios (η\eta) were selected. We found that the ⟨sx⟩\langle s_x\rangle of the electron bunch first decreases then increases in every case, which is similar to the spin dynamics of a single electron – Figure 1. When η\eta increases from 0.86 to 0.91, ⟨sx⟩\langle s_x\rangle decreases.

Electron density snapshots and polarization density in prolate and oblate bubbles

Figure 2. (color online) Electron density snapshots of prolate (η=0.92\eta= 0.92) and oblate (η=1.21\eta= 1.21) bubbles obtained from 3D PIC simulations with an initial plasma density of n0=0.006ncn_0 = 0.006n_c (a) and n0=0.015ncn_0 = 0.015n_c (b), respectively. Snapshots of the ⟨sx⟩\langle s_x\rangle polarization density of electrons with kinetic energy Ek>1E_k > 1 MeV, in prolate (c) and oblate (d) bubbles. The ⟨sx⟩\langle s_x\rangle of shell electrons are indicated by the green arrows. The laser parameters are same as in Figure 1.

the electron bunch first decreases then increases in every case, which is similar to the spin dynamics of a single electron – Figure 1. When η\eta increases from 0.86 to 0.91, ⟨sx⟩\langle s_x\rangle decreases. When η>1\eta>1, ⟨sx⟩\langle s_x\rangle also decreases with increasing η\eta and even goes negative in an oblate spheroidal bubble. Its value is maximized in a spherical bubble (η=1\eta=1) compared with the two cases with η=0.91\eta=0.91 and η=1.09\eta=1.09. This means that the polarization of an accelerated electron bunch can be preserved when the bubble shape is nearly spherical.

In order to check the persistence of this phenomenon, further 2.5D PIC simulations were carried out for different laser parameters. The dependence of ⟨sx⟩\langle s_x\rangle on the various aspect ratios η\eta after acceleration with laser intensities a0=15,20,30a_0=15,20,30 are presented in Figure 3(b). It is found that when the bubble is nearly spherical, the electron-beam depolarization is always minimal. It can even be zero as shown in Figure 3(c), where n0=0.20ncn_0=0.20n_c, a0=30a_0=30 and η=1.04\eta=1.04, respectively. In the case of a0≥20a_0\geq20, the value of ⟨sx⟩\langle s_x\rangle is negatively correlated with η\eta when η<0.9\eta<0.9, which arises from the smaller number of electrons injected into the bubble.

Finally, the mechanisms governing the spin dynamics in the bubble fields are considered. In Figure 4 the evolution of the ro tation frequency is analysed for three cases: (a) η=0.91\eta= 0.91 (case 1 in Figure 1), (b) η=1.04\eta= 1.04 (case in Figure 3(c)), where ⟨sx⟩=0.99\langle s_x\rangle=0.99; (c) η=1.09\eta= 1.09 (case 3 in Figure 1). The terms of Eq. (3) are separated into ΩE\Omega_E and ΩB\Omega_B for studying their individual contributions to the rotation frequency. Note that ∣Ωa∣≪∣ΩT∣\lvert\Omega_a\rvert\ll\lvert\Omega_T\rvert, and that ΩT\Omega_T (solid black line) can be divided to ΩB=eBz/meγ\Omega_B = eB_z/m_e\gamma (solid blue line) and ΩE=−e(v×E)/[me(γ+1)c2]\Omega_E = -e(\boldsymbol{v} \times\boldsymbol{E})/[m_e(\gamma+1)c^2] (solid red line).

Evolution of spin precession frequency components

Figure 4. (color online) Evolution of the total spin precession frequency ΩT\Omega_T (black line), term ΩB\Omega_B (blue line), term ΩE\Omega_E (red line), term Ωvx⋅Ey\Omega_{v_x\cdot E_y} of ΩE\Omega_E caused by vx⋅Eyv_x\cdot E_y (lightblue dashed), and term Ω−vy⋅Ex\Omega_{-v_y\cdot E_x} of ΩE\Omega_E caused by −vy⋅Ex-v_y\cdot E_x (sea-green dashed) for a typical electron in the bubble with different geometry (a) η=0.91\eta=0.91 (Case 1 in Figure 1), (b) η=1.04\eta=1.04 (Case in Figure 3(c)) and (c) η=1.09\eta=1.09 (Case 3 in Figure 1), respectively.

During the second stage (tI<t<tIIt_{\mathrm{I}} < t < t_{\mathrm{II}}), the electrons located near (ξ≈0\xi\approx0, y≈r⊥y \approx r_\perp) mainly feel EyE_y and BzB_z as given in Eqs. (2). Then, ΩBz\Omega_{B_z} and the vx⋅Eyv_x \cdot E_y term in ΩE\Omega_E make the largest contribution to ΩT\Omega_T. Since the electrons cannot obtain enough energy, this results in ∣ΩBz∣>∣ΩE∣\lvert\Omega_{B_z}\rvert> \lvert\Omega_E\rvert and the spins rotate clockwise. Assuming a bubble velocity vb=1v_b = 1, we obtain Bz∝(η2y)/4B_z \propto(\eta^2 y)/4 and Ey∝[(2−η2)y]/4E_y \propto[(2-\eta^2)y]/4, based on Eqs. (2). With increasing of η\eta, BzB_z increases and EyE_y decreases, then ΩT\Omega_T increases. Meanwhile, the electrons stay longer in this phase, which allows the contribution of BzB_z to dominate with increasing η\eta, and the degree of clockwise rotation for electron spin is positively correlated with η\eta.

During the third stage (tII<t<tIIIt_{\mathrm{II}} < t < t_{\mathrm{III}}), electrons arrive at the tail of bubble (ξ≈R∥\xi\approx R_{\parallel}, y≈0y \approx0), where Ey≈0E_y \approx0 and Bz≈0B_z \approx0. Here the electrons mainly feel ExE_x, then the part of vy⋅Exv_y \cdot E_x in ΩE\Omega_E becomes the dominant contribution, which results in counter-clockwise spin rotation. At the tail of bubble Ex≈η2ξ/2E_x \approx\eta^2\xi/2 under the assumption vb=1v_b = 1. Considering R⊥R_\perp is similar for bubbles with different shapes and ξ=R∥\xi= R_{\parallel}, we obtain Ex≈R∥2/(2R∥)E_x \approx R_{\parallel}^2/(2R_{\parallel}). With increasing η\eta, R∥R_{\parallel} decreases and the part of vy⋅Exv_y \cdot E_x in ΩE\Omega_E increases. Moreover, considering that the times when electron reach the tail of bubble are different, then the contribution of ΩBz\Omega_{B_z} is different for these three cases, which results in similar values of ΩT\Omega_T.

For the overall process, the spin rotation is the sum of the clockwise rotation during the second stage and the counter-clockwise rotation during the third stage. With increasing η\eta, the degree of clockwise rotation increases and the degree of counter-clockwise rotation stays roughly constant. Clockwise rotation dominates in the prolate bubble, whereas the counter-clockwise rotation is prevalent in an oblate bubble. More importantly, the two precessions can cancel each other in a bubble with a certain value of η\eta. As shown as Figure 4(b), an accelerated electron beam with no net depolarization can be produced when η=1.04\eta= 1.04.

Conclusion

In summary, the depolarization of accelerated electron bunches has been studied through test-particle dynamics during the interaction of a high-intensity laser with a longitudinally pre-polarized plasma. Spin rotation occurs mainly during the self-injection process. As a consequence, the bubble geometry has a strong influence during this phase, since it determines the electromagnetic field distributions. It is also found that polarization is preserved for nearly spherical bubble shapes. In contrast, non-spherical bubble shapes lead to strong depolarization. These findings should help to choose suitable laser-plasma parameters for producing a polarized electron beam using a pre-polarized plasma. Moreover, the case of a transversal polarization plasma, which is better accessible experimentally, will be investigated in the near future.

Acknowledgments

The 3D PIC simulations were carried out on the JURECA supercomputer at Jülich Supercomputing Centre, in particular through the computing time projects JZAM04 and LAPIPE. This work was supported by Germany Postdoctoral Council and the Helmholtz Centre (Grant No. 20191016) and China Postdoctoral Science Foundation (Grant No.2018M641993). The work of M.B. was carried out in the framework of the Jülich Short-Pulse Particle and Radiation Center 3 and was supported by the Accelerator Technology Helmholtz Infrastructure consortium ATHENA. This work was also supported by the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No.XDA25050100), the National Natural Science Foundation of China (No.11804348, No.11775056, No.11975154, and No.11991074), and the Science Challenge Project (No.TZ2018005).

References

  1. [1]T. Tajima and J. M. Dawson, Laser electron accelerator, Physical Review Letters 43, 267 (1979).DOI
  2. [2]G. Mourou and D. Umstadter, Development and applications of compact high-intensity lasers, Physics of Fluids B: Plasma Physics 4, 2315 (1992).DOI
  3. [3]M. Rosenbluth and C. Liu, Excitation of plasma waves by two laser beams,Physical Review Letters 29, 701 (1972).DOI
  4. [4]B. A. Shadwick, C. B. Schroeder, and E. Esarey, Nonlinear laser energy depletion in laser-plasma accelerators, Physics of Plasmas 16, 056704 (2009).
  5. [5]D. Umstadter, E. Esarey, and J. Kim, Nonlinear plasma waves resonantly driven by optimized laser pulse trains, Physical Review letters 72, 1224 (1994).
  6. [6]W. Leemans, D. Rodgers, P. Catravas, C. Geddes, G. Fubiani, E. Esarey, B. Shadwick, R. Donahue, and A. Smith, Gamma-neutron activation experiments using laser wakefield accelerators, Physics of Plasmas 8, 2510 (2001).DOI
  7. [7]A. Pukhov and J. Meyer-ter Vehn, Laser wake field acceleration: the highly non-linear broken-wave regime, Applied Physics B 74, 355 (2002).DOI
  8. [8]C. Geddes, C. Toth, J. Van Tilborg, E. Esarey, C. Schroeder, D. Bruhwiler, C. Niet er, J. Cary, and W. Leemans, High-quality electron beams from a laser wakefield accelerator using plasma-channel guiding, Nature 431, 538 (2004).pubmed.ncbi.nlm.nih.gov/15457252
  9. [9]S. P. Mangles, C. Murphy, Z. Najmudin, A. G. R. Thomas, J. Collier, A. E. Dangor, E. Divall, P. Foster, J. Gallacher, C. Hooker, et al., Monoenergetic beams of relativistic electrons from intense laser-plasma interactions, Nature 431, 535 (2004).pubmed.ncbi.nlm.nih.gov/15457251
  10. [10]J. Faure, Y. Glinec, A. Pukhov, S. Kiselev, S. Gordienko, E. Lefebvre, J.-P. Rousseau, F. Burgy, and V. Malka, A laser–plasma accelerator producing monoenergetic electron beams, Nature 431, 541 (2004).pubmed.ncbi.nlm.nih.gov/15457253
  11. [11]D. Jaroszynski, R. Bingham, E. Brunetti, B. Ersfeld, J. Gallacher, B. van Der Geer, R. Issac, S. Jamison, D. Jones, M. De Loos, et al., Radiation sources based on laser–plasma interactions, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 364, 689 (2006).pubmed.ncbi.nlm.nih.gov/16483958
  12. [12]H.-P. Schlenvoigt, K. Haupt, A. Debus, F. Budde, O. Jäckel, S. Pfotenhauer, H. Schwoerer, E. Rohwer, J. Gallacher, E. Brunetti, et al., A compact synchrotron radiation source driven by a laser-plasma wakefield accelerator, Nature Physics 4, 130 (2008).DOI
  13. [13]M. Wen, M. Tamburini, and C. H. Keitel, Polarized laser-wakefield-accelerated kiloampere electron beams, Physical Review letters 122, 214801 (2019).DOI
  14. [14]Y. Wu, L. Ji, X. Geng, Q. Yu, N. Wang, B. Feng, Z. Guo, W. Wang, C. Qin, X. Yan, et al., Polarized electron-beam acceleration driven by vortex laser pulses, New Journal of Physics 21, 073052 (2019).DOI
  15. [15]M. Büscher, A. Hützen, L. Ji, and A. Lehrach, Generation of polarized particle beams at relativistic laser intensities, High power laser science and engineering 8 (2020).
  16. [16]F. Rathmann, A. Saleev, and N. Nikolaev, Search for electric dipole moments of light ions in storage rings, Physics of particles and nuclei 45, 229 (2014).
  17. [17]G. Moortgat-Pick, T. Abe, G. Alexander, B. Ananthanarayan, A. Babich, V. Bharadwaj, D. Barber, A. Bartl, A. Brachmann, S. Chen, et al., Polarized positrons and electrons at the linear collider, Physics Reports 460, 131 (2008).
  18. [18]M. Burkardt, C. Miller, andW.-D. Nowak, Spin-polarized high-energy scattering of charged leptons on nucleons, Reports on Progress in Physics 73, 016201 (2009).arxiv.org/abs/0812.2208
  19. [19]E. Ageev, V. Y. Alexakhin, Y. Alexandrov, G. Alexeev, A. Amoroso, B. Badełek, F. Balestra, J. Ball, G. Baum, Y. Bedfer, et al., Measurement of the spin structure of the deuteron in the dis region, Physics Letters B 612, 154 (2005).DOI
  20. [20]C. Glashausser, Nuclear physics with polarized beams, Annual Review of Nuclear and Particle Science 29, 33 (1979).DOI
  21. [21]R. L. Jaffe, Open questions in high energy spin physics, International Journal of Modern Physics A 18, 1141 (2003).DOI
  22. [22]P. Adlarson, W. Augustyniak, W. Bardan, M. Bashkanov, F. Bergmann, M. Berłowski, H. Bhatt, M. Büscher, H. Calen, I. Ciepał, et al., Evidence for a new resonance from polarized neutron-proton scattering, Physical Review letters 112, 202301 (2014).
  23. [23]H. Baer, T. Barklow, K. Fujii, Y. Gao, A. Hoang, S. Kanemura, J. List, H. E. Logan, A. Nomerotski, M. Perelstein, et al., The international linear collider technical design report-volume 2: physics, arXiv preprint arXiv:1306.6352 (2013).arxiv.org/abs/1306.6352
  24. [24]T. Gay, Physics and technology of polarized electron scattering from atoms and molecules, Advances in Atomic, Molecular, and Optical Physics 57, 157 (2009).
  25. [25]E. W. McDaniel, Applied Atomic Collision Physics: A Treatise in Five Volumes. Gas Lasers/Vol. Editors EW McDaniel, William L. Nighan (Academic Press, 1982).DOI
  26. [26]X. An, M. Chen, J. Li, S.Weng, F. He, Z. Sheng, and J. Zhang, Mapping electromagnetic fields structure in plasma using a spin polarized electron beam, Physics of Plasmas 26, 123106 (2019).
  27. [27]X. F. Li, P. Gibbon, A. Hützen, M. Büscher, S. M. Weng, M. Chen, and Z. M. Sheng, Polarized proton acceleration in ultratintense laser interaction with near-critical-density plasmas,
  28. [28]N. Raab, M. Büscher, M. Cerchez, R. Engels, I. Engin, P. Gibbon, P. Greven, A. Holler, A. Karmakar, A. Lehrach, R. Maier, M. Swantusch, M. Toncian, T. Toncian, and O. Willi, Polarization measurement of laser-accelerated protons, Physics of Plasmas 21, 023104 (2014).DOI
  29. [29]S. Mane, Y. M. Shatunov, and K. Yokoya, Spin-polarized charged particle beams in high-energy accelerators, Reports on Progress in Physics 68, 1997 (2005).DOI
  30. [30]A. Sokolov and I. Ternov, Synchrotron radiation, Soviet Physics Journal 10, 39 (1967).
  31. [31]R.-T. Guo, Y. Wang, R. Shaisultanov, F. Wan, Z.-F. Xu, Y.-Y. Chen, K. Z. Hatsagortsyan, and J.-X. Li, Stochasticity in radiative polarization of ultrarelativistic electrons in an ultrastrong laser pulse, Physical Review Research 2, 033483 (2020).DOI
  32. [32]Y.-Y. Chen, P.-L. He, R. Shaisultanov, K. Z. Hatsagortsyan, and C. H. Keitel, Polarized positron beams via intense two-color laser pulses, Physical Review letters 123, 174801 (2019).DOI
  33. [33]D. Seipt, D. Del Sorbo, C. P. Ridgers, and A. G. Thomas, Ultrafast polarization of an electron beam in an intense bichromatic laser field, Physical Review A 100, 061402(R) (2019).DOI
  34. [34]D. Del Sorbo, D. Seipt, T. G. Blackburn, A. G. Thomas, C. D. Murphy, J. G. Kirk, and C. Ridgers, Spin polarization of electrons by ultraintense lasers, Physical Review A 96, 043407 (2017).DOI
  35. [35]Y.-F. Li, R. Shaisultanov, K. Z. Hatsagortsyan, F. Wan, C. H. Keitel, and J.-X. Li, Ultrarelativistic electron-beam polarization in single-shot interaction with an ultraintense laser pulse, Physical Review letters 122, 154801 (2019).DOI
  36. [36]Y. Wu, L. Ji, X. Geng, J. Thomas, M. Büscher, A. Pukhov, A. Hützen, L. Zhang, B. Shen, and R. Li, Spin filter for polarized electron acceleration in plasma wakefields, Physical Review Applied 13, 044064 (2020).DOI
  37. [37]M. Wen, C. H. Keitel, and H. Bauke, Spin-one-half particles in strong electromagnetic fields: Spin effects and radiation reaction, Physical Review A 95, 042102 (2017).DOI
  38. [38]Y. Wu, L. Ji, X. Geng, Q. Yu, N. Wang, B. Feng, Z. Guo, W.Wang, C. Qin, X. Yan, et al., Polarized electron acceleration in beam-driven plasma wakefield based on density down-ramp injection, Physical Review E 100, 043202 (2019).DOI
  39. [39]A. Hützen, J. Thomas, J. Böker, R. Engels, R. Gebel, A. Lehrach, A. Pukhov, P. T. Rakitzis, D. Sofikitis, and M. Büscher, Polarized proton beams from laser-induced plasmas, High Power Laser Science and Engineering 7, e16 (2019).
  40. [40]D. Sofikitis, C. S. Kannis, G. K. Boulogiannis, and T. P. Rakitzis, Ultrahigh-density spinpolarized H and D observed via magnetization quantum beats, Physical Review Letters 121, 083001 (2018).DOI
  41. [41]J. Vieira, C.-K. Huang,W. Mori, and L. Silva, Polarized beam conditioning in plasma based acceleration, Physical Review Special Topics-Accelerators and Beams 14, 071303 (2011).DOI
  42. [42]R. Sadighi-Bonabi and S. Rahmatallahpur, Potential and energy of the monoenergetic electrons in an alternative ellipsoidal bubble model, Physical Review A 81, 023408 (2010).
  43. [43]H.-C. Wu, B.-S. Xie, S. Zhang, X.-R. Hong, X.-Y. Zhao, and M.-P. Liu, Bubble core field modification by residual electrons inside the bubble, Physics of Plasmas 17, 113103 (2010).DOI
  44. [44]X. F. Li, Q. Yu, Y. J. Gu, S. Huang, Q. Kong, and S. Kawata, Bubble shape and electromagnetic field in the nonlinear regime for laser wakefield acceleration, Physics of Plasmas 22, 083112 (2015).DOI
  45. [45]X. Li, Y. Gu, Q. Yu, S. Huang, F. Zhang, Q. Kong, and S. Kawata, Dependence of electron trapping on bubble geometry in laser-plasma wakefield acceleration, Physics of Plasmas 21, 073109 (2014).
  46. [46]Z. M. Chitgar, P. Gibbon, J. Böker, A. Lehrach, and M. Büscher, Electron self-injection threshold for the tandem-pulse laser wakefield accelerator, Physics of Plasmas 27, 023106 (2020).
  47. [47]J. F. Qu, X. F. Li, X. Y. Liu, P. Liu, Y. J. Song, Z. Fu, Q. Yu, and Q. Kong, Terahertz radiation generated by shell electrons in the bubble regime via the interaction between an intense laser and underdense plasma, Physics of Plasmas 26, 033115 (2019).DOI
  48. [48]R. Assmann et al., EuPRAXIA Conceptual Design Report, European physical journal special topics 229, 3675 (2020).
  49. [49]T. Arber, K. Bennett, C. Brady, A. Lawrence-Douglas, M. Ramsay, N. Sircombe, P. Gillies, R. Evans, H. Schmitz, A. Bell, et al., Contemporary particle-in-cell approach to laser-plasma modelling, Plasma Physics and Controlled Fusion 57, 113001 (2015).DOI
  50. [50]I. Kostyukov, A. Pukhov, and S. Kiselev, Phenomenological theory of laser-plasma interaction in bubble regime, Physics of Plasmas 11, 5256 (2004).DOI
  51. [51]W. Lu, C. Huang, M. Zhou, W. Mori, and T. Katsouleas, Non-linear theory for relativistic plasma wakefields in the blowout regime, Physical Review Letters 96, 165002 (2006).
  52. [52]W. Lu, M. Tzoufras, C. Joshi, F. Tsung, W. Mori, J. Vieira, R. Fonseca, and L. Silva, Generating multi-gev electron bunches using single stage laser wakefield acceleration in a 3d nonlinear regime, Physical Review Special Topics-Accelerators and Beams 10, 061301 (2007).DOI
  53. [53]M. Schnell, A. Sävert, I. Uschmann, M. Reuter, M. Nicolai, T. Kämpfer, B. Landgraf, O. Jäckel, O. Jansen, A. Pukhov, et al., Optical control of hard x-ray polarization by electron injection in a laser wakefield accelerator, Nature communications 4, 1 (2013).DOI
  54. [54]J. Thomas, A. Hützen, A. Lehrach, A. Pukhov, L. Ji, Y. Wu, X. Geng, and M. Büscher, Scaling laws for the depolarization time of relativistic particle beams in strong fields Phys. Rev. Accel. Beams 23, 064401 (2020).

Paper details

vlnc:W_9mthwta5
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 7

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents