betaFeedback

WorksPhysics and Astronomy

Strain engineering of magnetic anisotropy in the kagome magnet Fe3Sn2

Abstract

The ability to control magnetism with strain offers innovative pathways for the modulation of magnetic domain configurations and for the manipulation of magnetic states in materials on the nanoscale. Although the effect of strain on magnetic domains has been recognized since the early work of C. Kittel, detailed local observations have been elusive. Here, we use mechanical strain to achieve reversible control of magnetic textures in a kagome-type Fe3Sn2 ferromagnet without the use of an external electric current or magnetic field in situ in a transmission electron microscope at room temperature. We use Fresnel defocus imaging, off-axis electron holography and micromagnetic simulations to show that tensile strain modifies the structures of dipolar skyrmions and switches their magnetization between out-of-plane and in-plane configurations. We also present quantitative measurements of magnetic domain wall structures and their transformations as a function of strain. Our results demonstrate the fundamental importance of anisotropy effects and their interplay with magnetoelastic and magnetocrystalline energies, providing new opportunities for the development of strain-controlled devices for spintronic applications.

Introduction

Increasing interest in quantum materials is based in part on the synergy between strongly correlated electron states, topology and magnetism, which can lead to unconventional physical properties. Such systems include superconductors, topological semiconductors, Weyl semimetals, quantum spin liquids and two-dimensional (2D) materials, in which quantum effects are manifested over a wide range of energy and length scales [1]. Magnetism on a kagome lattice, a 2D network of corner-sharing triangles, provides a versatile platform for investigating the interplay between magnetic phenomena, topology and electronic correlations [2, 3, 4, 5]. Kagome layers of 3d transition metals, stacked in perpendicular directions, offer an interesting realization of this concept. For example, kagome-type Fe3Sn2\mathrm{Fe}_{3}\mathrm{Sn}_{2} exhibits a wide range of intriguing properties, such as flat bands near the Fermi energy [6], massive Dirac fermions [7, 8], and a large anomalous Hall effect [7, 9, 10, 11], combined with a high Curie temperature (670 K) [12]. The material has a centrosymmetric rhombohedral structure of Fe-Sn bilayers, which alternate with Sn layers along the crystallographic cc-axis (Figure 1a, and Supplemental Material Fig. S1), resulting in competing uniaxial (KuK_u) and shape anisotropies with a quality factor of <1<1 at room temperature. In thin films of Fe3Sn2\mathrm{Fe}_{3}\mathrm{Sn}_{2}, a competition between perpendicular magnetic anisotropy and shape anisotropy can lead to both type-I and type-II magnetic bubble formation [13], with diverse helicities [14]. In such structures, the spin texture of the bubbles is non-uniform, introducing additional surface spin twists and internal degrees of freedom. Similar spin structures have also been observed in the 2D van-der-Waals-type ferromagnet Fe5GeTe2\mathrm{Fe}_{5}\mathrm{GeTe}_{2} [15], and are typically termed unconventional bubbles [15] or dipolar skyrmions [14]. We use the latter name in the present work. The possibility of driving dipolar skyrmions with an electric current [16] and of detecting them using anisotropic magnetoresistance [17] makes Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 of particular interest for spintronic applications.

Tensile straining of Fe3Sn2

Figure 1. Tensile straining of Fe3_3Sn2_2. (a) Unit cell and an atomic resolution HAADF STEM image of Fe3_3Sn2_2 viewed along the [120] crystallographic direction. (b) Secondary electron SEM image of an Fe3_3Sn2_2 TEM lamella mounted on the mechanical tensile device. (c) Bright-field TEM image of the single crystal Fe3_3Sn2_2 lamella. (d) Fresnel defocus image of Fe3_3Sn2_2, showing stripe domains and dipolar skyrmions of type-I. The defocus value is 0.8 mm. (e) Selected images showing the four basic magnetic field rotation diversities of dipolar skyrmions. White and black circles indicate counterclockwise and clockwise in-plane directions, respectively. (f) Micromagnetic simulation displayed in the form of the mid-section at z=h/2z = h/2. (g) Line profile along the green line in (f) showing the magnetization (mzm_z) at the surface and in a bulk section of the dipolar skyrmions. (h) Section of micromagnetic simulation of two dipolar skyrmions marked in (f), showing Néel and Bloch spin textures at the surface and bulk. Note the opposite rotation of the magnetization in the mid-section.

In addition to applied electric currents and external magnetic fields, there is great potential in introducing and controlling strain in a material system, which adds another degree of freedom when engineering device architectures with desired properties. In spintronics, strain engineering is used to introduce magneto-elastic coupling in magnetostrictive ferromagnets [18]. Strain has also been applied to skyrmion-hosting materials [19, 20, 21, 22]. However, few experimental studies have been carried out to investigate local changes in strain-induced magnetic states on the nanoscale. Recently, Liu et al. [23] reported strain-induced reversible motion of skyrmions using inhomogenous uniaxial compressive strain. In our previous work, we presented strain-induced-hardening in ferromagnetic Ni thin films [24] in the presence of uniform tensile strain. Recent advances in development of straining devices [25, 26] now allow in situ tensile straining experiments with unprecedented resolution and precision.

Here, we show how magnetic texture in Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2, which comprises dipolar skyrmions, can be controlled by means of mechanical strain at room temperature, without the need for an electric current or external magnetic field. We select this kagome compound because it is expected to display a large strain effect as it undergoes magnetic reorientation below room temperature, driven by a change in magnetocrystalline anisotropy from easy-axis-type to easy-plane-type [27, 28, 29]. We use Lorentz transmission electron microscopy (TEM) and off-axis electron holography to directly observe and quantify strain-induced magnetization rotation in single crystalline Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2. We show that dipolar skyrmions merge into a periodic stripe domain structure, before the out-of-plane magnetic field gradually rotates to an in-plane direction parallel to the applied strain direction. In this state, large magnetic domains are separated by bow-tie domain walls. On removing the strain, the magnetization returns to its initial out-of-plane arrangement. The observed magnetization rotation is thought to result from the original magnetic easy-axis anisotropy being over-ridden by strain-induced anisotropy, which favors in-plane magnetic spin alignment. Such precise and reversible control of a magnetic state using mechanical strain opens new possibilities for the design of advanced spintronic devices that exploit the intricate interplay between different anisotropies.

Results and Discussion

Figure 1b shows an electron-transparent Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 specimen mounted in a miniature straining device, which acts in the horizontal direction marked by a white arrow. The Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 specimen is single crystalline, with no visible structural defects (Figure 1c). The viewing direction is parallel to [1] and the horizontal [100] axis is parallel to the strain direction. The energetically-favorable domain state in a thin Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 film comprises stripe-like domains, which can be controlled by a magnetic field applied in the kagome plane. (See Fig. S2 in the Supplemental Material.) In order to form dipolar skyrmions, a magnetic field of 0.53 T is applied parallel to the magnetic easy axis, i.e., perpendicular to the kagome plane, using the conventional objective lens of the microscope. The applied field is then removed to image the magnetic state at remanence, as shown in Figure 1d for a Fresnel defocus image of dipolar skyrmions coexisting with stripe domains. Analysis of the image contrast shows that the dipolar skyrmions have diverse helicities [24]. Magnified images are shown in Figure 1e. The magnetic field arrangement in each dipolar skyrmion has a two-fold rotation sense, i.e., clockwise or counterclockwise in the inner and outer regions. (See Fig. S3 in the Supplemental Material.) A balance between ferromagnetic exchange and dipole-dipole interactions results in a hybrid Bloch-Néel spin twist, which varies through the thickness of the specimen in a three-dimensional manner. The black and white contrast in the Fresnel defocus images (Figure 1d, Figure 1e) can be used to identify the dipolar skyrmions and their direction of rotation. In analogy to conventional magnetic bubbles, dipolar skyrmions in Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 exhibit type-I and type-II configurations. The latter configuration contains two domain walls in the peripheral region. The schematic representation of the different magnetic structures and their Fresnel defocus images can be found in Fig. S4 in the Supplemental Material. Figure 1f shows the result of a micromagnetic simulation of Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2, which reproduces the observed magnetic texture. (See the Methods section for details.) Circular dipolar skyrmions with clockwise and counterclockwise rotations and randomly-oriented stripe domains are visible. The simulation also reproduces the Bloch-type to Néel-type magnetization rotation of the dipolar skyrmions, which can be followed in the variation of the mzm_z magnetization component with depth, as shown in Figure 1g. Figure 1h illustrates the Néel-type arrangement on the surfaces and the Bloch-type arrangement in the mid-sections [13] of two dipolar skyrmions.

In situ tensile straining

Figure 2 shows Fresnel defocus images of the effect of tensile strain on the magnetic state of Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 under magnetic field free conditions. The lateral dimensions of the specimen are approximately 10 μm×4 μm10\ \mu\mathrm{m} \times4\ \mu\mathrm{m} (width ×\times height), while its thickness varies from 156 to 197 nm within the field of view in Figure 2a. A total of 229 dipolar skyrmions was counted. In the presence of a strain of approximately 0.8 %, the dipolar skyrmions were replaced by stripe domains oriented perpendicular to the strain direction (Figure 2b, Figure 2c). Above a strain of 1 %, uniform domains formed near the specimen edge (Fig. 2d) and grew to form linear domain walls parallel to the strain direction (Fig. 2e). Closure of the vertical domain walls then resulted in the formation of horizontal domain walls (Fig. 2e–g). The horizontal domain walls, which were formed by vertical narrowing of the original stripe pattern, preserved the periodic contrast variation of the stripes, with a period of 190±18 nm. At a maximum strain of 1.68% (Fig. 2g), the specimen contained large domains separated by straight domain walls. When the strain was released (Fig. 2h–j), vertical stripe domains formed again, enlarging as the strain was decreased to zero. The transition from a vertical

Fresnel defocus images of in situ tensile straining and releasing of Fe3Sn2

Figure 2. Fresnel defocus images of in situ (a-f) tensile straining and (g-j) releasing of Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 recorded at magnetic remanence. The strain is applied along the horizontal direction, marked using an arrow in (a). The defocus value is 0.8 mm.

domain structure to large domains and back in Figs 2e–h resembles a zipper mechanism. (See Movie S1 in the Supplemental Material). Dipolar skyrmions were not observed in the fully relaxed state in this specimen. However, their re-formation was observed in samples that were highly strained and had passed through the fracture point (see fig:S5 in the Supplemental Material), suggesting that a small amount of residual strain may remain once the externally applied stress is released. The fine balance between different anisotropies in Fe3_3Sn2_2 results in a strong thickness dependence of the magnetic structure. For thicknesses below 100 nm, magnetocrystalline anisotropy is not strong enough to support dipolar skyrmions and stripe domains with out-of-plane magnetization. (See Fig. S5 in the Supplemental Material). Furthermore, position control of dipolar skyrmions can be realized by using mechanical strain in the presence of a magnetic field (see Movie S2 in the Supplemental Material), with the positions of dipolar skyrmions changing directionally in the presence of strain and returning to their original positions when strain is released.

The in situ experiment described in Figure 2 reveals three primary strain-induced processes in the Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 thin film: (i) the formation of a regular vertical stripe pattern by the gradual elimination and merging of dipolar skyrmions up to a strain of 1%; (ii) the formation of large domains with in-plane magnetization separated by straight domain walls (1–1.7%); (iii) recovery of the vertical stripe pattern upon strain release.

At moderate strains (up to 0.7%), the dipolar skyrmions merge via two characteristic mechanisms, which are presented in Figure 3a-Figure 3c. In the first case, clockwise and counterclockwise rotation of the magnetization rotation of adjacent dipolar skyrmions is associated with parallel field alignment at their peripheries. In the presence of strain, the dipolar skyrmions merge to form an elliptical shape, whose opposite ends maintain the original magnetization rotation. The outer edge of the newly-formed dipolar skyrmion contains two domain walls, which form a type-II structure and are marked by arrowheads in Figure 3a. No core structure is observed in the merged particle, suggesting the presence of a hybrid texture [14], in which the upper and lower surfaces of the skyrmion have opposite helicities. As the strain is released, the two domain walls move closer together, until a small segment of about 50 nm remains between them. Figure 3b shows a magnetic induction map of such a type-II structure measured using off-axis electron holography. At the two domain walls, the in-plane field directions are head-to-head and tail-to-tail. A similar merging process of skyrmions with opposite helicities to form a particle with a complex spin structure is presented in Fig. S6 in the Supplemental Material. In the second case (Figure 3c), clockwise rotation of the magnetization of adjacent dipolar skyrmions is associated with anti-parallel field alignment at their peripheries. This configuration remains robust against merging up to higher strain levels.

Lorentz TEM and off-axis electron holography of strain induced effects in Fe3Sn2

Figure 3. Lorentz TEM and off-axis electron holography of strain induced effects in Fe3_3Sn2_2. (a) Merging of dipolar skyrmions with opposite helicities at moderate strain. Triangular arrowheads mark domain walls. The defocus value is 0.6 mm. (b) In-plane magnetic induction map of the resulting type-II dipolar skyrmion, measured using off-axis electron holography. The direction of the projected in-plane magnetic induction is visualized according to the color wheel. (c) The anti-parallel field alignment at the peripheries of two dipolar skyrmions is robust against skyrmion merging at high strain. The defocus value is 0.6 mm. (d) Formation of stripe domains perpendicular to the strain direction. The marked region was used to estimate the in-plane phase gradient values plotted in (e), which reveal changes in projected in-plane magnetic induction as the strain increased (red circles) and then released (blue circles). The error bars correspond to the standard deviations of the phase gradient.

We analyzed the internal magnetic field alignment in the vertical stripe domains. Figure 3d shows the gradient of the electron optical phase measured using off-axis electron holography at different strain levels. As the electron optical phase is sensitive to in-plane field components projected in the incident electron beam direction, field rotation inside the Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 specimen can be inferred from the phase gradient measured at the same location as a function of strain. The in-plane phase gradient in Figure 3e increases significantly as the strain is increased to 1.30%, which is consistent with the magnetization in the sample rotating from out-of-plane to in-plane.

The most striking and unexpected observations of the strain-release cycle in the Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 thin film presented in Figure 2 are that the configuration changes to domain walls that are perpendicular to the strain axis before aligning with the strain axis, and that the initial out-of-plane magnetization direction rotates away from the original magnetocrystalline anisotropy axis and aligns in-plane in the presence of strain before returning reversibly to the out-of-plane direction when the strain is released.

Tuning of magnetocrystalline anisotropy energy via the magnetoelastic effect

Figure 4 shows micromagnetic simulations of the magnetic state of the Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 lamella at different strains. The first row from the top shows the state of the surface of the lamella, while the second row shows the state at half of the lamella thickness (z=h/2z = h/2).

Micromagnetic simulation results of Fe3Sn2

Figure 4. Micromagnetic simulation results of Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2. (a) Upper and middle sections, showing Néel and Bloch arrangements as a function of strain (0, 1 and 2%). (b,c) Calculated anisotropy energy (EaniE_{\mathrm{ani}}) and magnetoelastic energy (EmelE_{\mathrm{mel}}), revealing hysteretic behavior during strain loading and unloading. (d) The onset of in-plane magnetization occurs when the magnetoelastic energy density becomes greater than the magnetocrystalline anisotropy energy.

In these simulations, the first-order magnetoelastic constant B1B_1 was used as a fitting parameter to achieve a match with the experimental results. The value of B1B_1 determines the strain at which the magnetoelastic energy EmelE_{\mathrm{mel}} becomes larger than the original magnetocrystalline uniaxial anisotropy energy EaniE_{\mathrm{ani}}. By comparing the simulations with the experimental results, in which in-plane rotation of the magnetization was observed at ϵ≈1.3%\epsilon\approx1.3\%, a value for B1B_1 of -3100±\pm100 J/m3^3 was obtained. Significantly, we find that the simulations reproduce all of the key experimental features: (i) the initial state that contains stripe domains and dipolar skyrmions with both helicities; (ii) merging and rotation of the stripe domains and dipolar skyrmions perpendicular to the strain axis with increasing tensile strain along the xx axis; (iii) abrupt rotation of the magnetization to the in-plane direction at a critical strain of ϵ≈1.3%\epsilon\approx1.3\%; (iv) return of the system to a state comparable to the original state upon decreasing the strain, while exhibiting hysteretic behavior.

Based on the simulations and on the analysis of the domain wall structures, we propose that the hysteretic behavior results from configurational anisotropy [30], i.e., it is associated with the topology of the magnetization textures and the processes by which the local magnetization twists to eliminate stripe domains.

The formation of stripe domains is unexpected. Conventionally, the magnetization would be expected to gradually turn towards the strain direction and not to form domains perpendicular to it. Our analysis here reveals that the formation of stripe domains perpendicular to the strain axis satisfies exchange energy, magnetoelastic energy and magnetostatic energy, in contrast to the penalty in magnetocrystalline anisotropy energy. At a critical strain of 1.3%, there is a drastic change in the energy balance, with EaniE_{\mathrm{ani}} increasing by 50%, while at the same time EmelE_{\mathrm{mel}} decreases by 50% (see Figure 4d).

Domain wall width analysis

The off-axis electron holography results and micromagnetic simulations allow the domain wall structure in thin films of Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 to be analyzed, in particular for the bow-tie domain wall that forms at high strain levels. Figure 5 shows experimental and theoretical analyses of domain walls in dipolar skyrmions and bow-tie domain walls. Domain wall width measurements were carried out for dipolar skyrmions in the initial and highly strained conditions (Figure 5a). Figure 5b shows phase profiles extracted across the edges of dipolar skyrmions marked by arrows in Figure 5a. Each profile was fitted using a hyperbolic tangent function, according to the expression y=y0+atanh⁡((x−x0)/w)y = y_0 + a \tanh((x - x_0)/w), where y0y_0, aa, x0x_0 and ww are constants obtained from the fit. The width of the domain wall can be defined as δ=πw\delta= \pi w. In this way, the domain wall width for Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 dipolar skyrmions was determined to be 51±951 \pm9 nm for the initial condition and 85±985 \pm9 nm for the strained condition. Figure 5c shows a magnetic induction map of a bow-tie domain wall measured using off-axis electron holography. The parallel contour lines and colors confirm the 180∘180^\circ alignment of the projected in-plane field. The inset to Figure 5c shows part of the magnetic induction map with a phase contour spacing of π/2\pi/2 radians, which helps to visualize the field lines at the domain wall. The decrease in contour spacing in the middle section suggests out-of-plane magnetic field alignment. The term “bow-tie domain wall” is inspired by the well-known cross-tie domain wall structure [31] (page 225), which comprises 90∘90^\circ segments of circular and cross Bloch lines. In the case of a cross-tie domain wall can be defined as δ=πw\delta= \pi w. In this way, the domain wall width for Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 dipolar skyrmions was determined to be 51±951 \pm9 nm for the initial condition and 85±985 \pm9 nm for the strained condition. Figure 5c shows a magnetic induction map of a bow-tie domain wall measured using off-axis electron holography. The parallel contour lines and colors confirm the 180∘180^\circ alignment of the projected in-plane field. The inset to Figure 5c shows part of the magnetic induction map with a phase contour spacing of π/2\pi/2 radians, which helps to visualize the field lines at the domain wall. The decrease in contour spacing in the middle section suggests out-of-plane magnetic field alignment. The term “bow-tie domain wall” is inspired by the well-known cross-tie domain wall structure [31] (page 225), which comprises 90∘90^\circ segments of circular and cross Bloch lines. In the case of a cross-tie domain wall, the in-plane magnetic induction is uniform and the density of the induction lines is constant. Experimental measurements of a conventional cross-tie wall in a soft ferromagnetic alloy using off-axis electron holography were presented in Ref. [32](Figure 5, p. 74). In contrast, the bow-tie wall presented here contains segments where the magnetic field is oriented in the out-of-plane direction (See Fig. S4 in the Supplemental Material). By using the phase gradient (Figure 5d), the domain wall width was measured to be 57±9 nm (Figure 5e), which is similar to the value measured for unstrained dipolar skyrmions. Figure 5f shows a top view and a cross-section of a bow-tie domain wall extracted from the micromagnetic simulation along the line A-A’. The arrows show an alternation of out-of-plane orientation and rotation within the segments.

Domain wall width analyses of Fe3Sn2

Figure 5. Domain wall width analyses of Fe3_3Sn2_2. (a) Magnetic induction maps and phase shift images of dipolar skyrmions imaged in relaxed (no strain) and high strain conditions. The phase contour spacing is 2π/62\pi/6 radians. The scale bar is 200 nm. (b) Line profiles extracted from the phase shift images in (a) across domain walls at the positions of the arrows. The line profiles are fitted using tanhtanh functions. The measured domain wall width increases from 51±951\pm9 to 85±985\pm9 nm with strain for dipolar skyrmions. (c) Magnetic induction map of in-plane magnetic domains imaged at high strain. Arrows and colors highlight the 180° alignment of the in-plane magnetic field directions. The contour spacing in the rectangular box is increased to π/2\pi/2 radians to visualize the induction lines of the bow-tie domain wall. (d,e) Differential of the phase shift and line profile used to determine a a value for the domain wall width of 57±957\pm9 nm. (f) Micromagnetic simulation of in-plane magnetic domains with a bow-tie wall showing the surface (top). The cross section marked (A-A′) reveals the depth variation of the field direction in the bow-tie domain wall. The double-head arrow indicates the location of the linescan of mzm_z shown in (g). The fitting reveals the wall width variation.

In our micromagnetic simulations of dipolar skyrmions, we used the expression presented above to fit profiles of the zz component of the magnetization at different zz positions, since the domain wall is not uniform through the thickness of the sample. In the center of the lamella (z=h/2z = h/2), the width is 43±2 nm, whereas between the center and the surface (z=3h/4z = 3h/4) it is 55±2 nm, yielding an average domain wall width of 49±2 nm, in close agreement with the experimental result presented in Figure 5b. In contrast, the domain wall thickness in the strained state (Figure 5f) is larger in the center of the lamella (60±2 nm) and becomes smaller towards the surfaces (42±2 nm), yielding an average domain wall width of 51±2 nm.

Conclusion

Our study of mechanical-strain-induced effects on magnetic states in thin films of kagome-type Fe3Sn2\mathrm{Fe}_3\mathrm{Sn}_2 using in situ magnetic imaging in the transmission electron microscope and a MEMS-based straining nanodevice reveals the elimination and merging of dipolar skyrmions, the formation of regular stripe domains and rotation of the preferred out-of-plane magnetization direction to in-plane as the strain is increased, while the system stays in the elastic regime. We identify two dipolar skyrmion merging mechanisms under low strain conditions and the formation of a bow-tie domain wall, which comprises both in-plane and out-of-plane field components, in a highly strained condition. Micromagnetic simulations reveal a hysteretic strain effect on the anisotropy and magnetoelastic energies and show that the formation of stripe domains perpendicular to the strain axis satisfies exchange, magnetoelastic and magnetostatic energies. Our observations highlight the potential for strain-controlled magnetism in nanomagnetic devices, and underscore the need for local studies of the interplay between anisotropic effects, magnetoelastic energies and magnetocrystalline properties for advancing practical applications in magnetic technology.

Methods

Specimen preparation and straining

. In situ deformation in the TEM was performed using a Bestron (Beijing) Science and Technology Co., LTD in situ double tilt TEM specimen straining holder (INSTEMS-MET)[33]. Focused Ga ion beam sputtering in a dual beam scanning electron microscope (ThermoFisher Helios NanoLab 460F1) was used to position and thin an Fe3_3Sn2_2 single crystal that had been prepared using a chemical transport method [13] in the rectangular frame of a micro-electromechanical systems (MEMS) chip. Markers were fabricated at the edge of the lamella for strain measurement, as shown in Figure 1b. Strain was applied to the specimen in the Bestron holder using the MEMS chip, which contains a lead zirconate titanate (PZT) actuator for displacement control. In this setup, hooks catch a T-head to approximately realize a uniaxial tensile test of the lamella.

Magnetic imaging

Images of magnetic domain walls and projected in-plane magnetic induction were recorded and quantified using Fresnel defocus imaging and off-axis electron holography. Off-axis electron holograms were recorded using a spherical aberration corrected TEM (ThermoFisher Titan 60-300) operated at 300 kV. Magnetic-field-free conditions were realized by switching off the conventional microscope objective lens and using the transfer lens of the aberration corrector for imaging. Fresnel defocus images and off-axis electron holograms were recorded on a 4k ×\times 4k pixel direct electron counting detector (Gatan K2 IS). The typical biprism voltage was 90 V, which corresponded to a holographic interference fringe spacing of 3.02 nm and holographic interference fringe contrast measured in vacuum of 60%. Image analysis was performed using Gatan Microscopy Suite and HoloWorks software. Total phase shift information was extracted using a standard Fourier transform method. The total phase shift provides information about local variations in both electrostatic and magnetic potential. Since the lamella is a single crystal with negligible thickness variations, it was assumed that the electrostatic contribution to the signal is constant and that any variations in phase away from the sample edge are magnetic in origin. Magnetic induction maps were generated by in the form of contours obtained from the recorded phase images and colors determined from their gradients.

Micromagnetic simulation

The Fe3_3Sn2_2 sample was modeled as a ferromagnet with exchange stiffness AA, magnetoelastic coupling B1B_1, saturation magnetization MsM_s and first-order and second-order perpendicular magnetocrystalline anisotropies K1K_1 and K2K_2, respectively.

The magnetoelastic energy density of a hexagonal lattice is [34]

Emel=B1(mx2ϵxx+my2ϵyy+mxmyϵxy)−B2mz2ϵzz−B3mz2(ϵxx+ϵyy)+B4(mymzϵyz+mxmzϵxz)(1)E_{\mathrm{mel}}=B_1\left(m_x^2\epsilon_{xx}+m_y^2\epsilon_{yy}+m_xm_y\epsilon_{xy}\right)-B_2m_z^2\epsilon_{zz}-B_3m_z^2\left(\epsilon_{xx}+\epsilon_{yy}\right)+B_4\left(m_ym_z\epsilon_{yz}+m_xm_z\epsilon_{xz}\right) \tag*{(1)}

To the best of our knowledge, these constants are not known for Fe3_3Sn2_2. However, in our experiments tensile strain was only applied along the xx axis. Therefore, the only non-vanishing terms in the above equation are the B1mx2ϵxxB_1m_x^2\epsilon_{xx} and −B3mz2ϵxx-B_3m_z^2\epsilon_{xx} terms. Given that the latter term has the same mzm_z dependence as the first-order uniaxial anisotropy, we set B3=0B_3=0 and considered only the first order magnetoelastic constant B1B_1 in our approximation. The energy density of our model then takes the form

E=∑i=x,y,zA(∇mi)2−K1(mz)2−K2(mz)4+B1(mx)2ϵxx−μ0Ms(H+12Hdip)⋅m(2)E=\sum_{i=x,y,z}A\left(\nabla m_i\right)^2-K_1\left(m_z\right)^2-K_2\left(m_z\right)^4+B_1\left(m_x\right)^2\epsilon_{xx}-\mu_0M_s\left(\mathbf{H}+\frac{1}{2}\mathbf{H}_{\mathrm{dip}}\right)\cdot\mathbf{m} \tag*{(2)}

where mi=x,y,zm_{i=x,y,z} are components of the magnetization unit vector m=M/Ms\mathbf{m}=\mathbf{M}/M_s, H\mathbf{H} is the external field vector. Hdip\mathbf{H}_{\mathrm{dip}} is the magnetic field vector due to long-range dipole-dipole interactions and ϵ\epsilon is the mechanical strain.

The values of the saturation magnetization and the two uniaxial anisotropy constants were measured experimentally and found to be Ms=5.66×105M_s=5.66\times10^5 A/m, K1=5.2×104K_1=5.2\times10^4 J/m3^3 and K2=6.5×103K_2=6.5\times10^3 J/m3^3, respectively. Our value for MsM_s is closer to that reported in Ref. [35] compared to that reported in Refs [14, 36]. Our value of the first-order uniaxial anisotropy constant is in good agreement with Refs [14, 36, 37]. For the exchange stiffness, we estimated a value by comparing the Curie temperature of Fe3_3Sn2_2 with that of pure Fe, and obtained a value of A=12×10−12A=12\times10^{-12} J/m, which is higher than the value reported in Refs [14, 36, 37] and lower than the value estimated in Ref. [35] from the experimentally-determined domain wall width. Our approach for estimating AA provides a more accurate estimate because the Curie temperature can be measured more accurately than the domain wall width, which depends on the imaging resolution and sample thickness (cf. [24]).

In our sample, the exchange length is δ=2A/μ0Ms2=7.7\delta=\sqrt{2A/\mu_0M_s^2}=7.7 nm. In the simulation, the sample had dimensions of 2000 nm ×\times 2000 nm ×\times 200 nm, which is comparable to the dimensions of the sample used in our experiments. The cell size was 4 nm ×\times 4 nm ×\times 4$ nm, and the micromagnetic simulations were performed using Mumax3 [38]. Tests using other cell sizes were performed to confirm numerical stability. The simulation protocol was to start the system with an initial state of m=(0,0,1)\mathbf{m}=(0,0,1) and numerically integrate the Landau-Lifshitz-Gilbert (LLG) equation ∂tm=−γ(m×Heff)+α(m×∂tm)\partial_t\mathbf{m}=-\gamma(\mathbf{m}\times\mathbf{H}_{\mathrm{eff}})+\alpha(\mathbf{m}\times\partial_t\mathbf{m}), where Heff=−∂E/∂μ0Ms\mathbf{H}_{\mathrm{eff}}=-\partial E/\partial\mu_0M_s is the effective field. The LLG equation was integrated for 20 ns until the system reached equilibrium in zero field and for zero strain. Then, the tensile strain ϵxx\epsilon_{xx} was increased gradually from 0 to 2% in steps of 0.05%. At each step, the LLG equation was integrated numerically for 2 ns to allow the system to reach a new equilibrium.

Acknowledgments

The authors are grateful for funding from the European Research Council under the European Union’s Horizon 2020 Research and Innovation Programme (Grant No. 856538, project “3D MAGiC”), to the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) via projects No. 405553726 (TRR270), No. 492547816 (TRR260) and No. 49254781 (TRR 360), to the Research Council of Norway (No. 263228) and Centres of Excellence funding scheme (No. 262633, “QuSpin”), to the “111” project (DB18015), to the National Key R&D Program of China (2021YFA1200201) and to Project No. ANCD20.80009.5007.19 (Moldova). N.S. Kiselev is acknowledged for stimulating discussions.

References

  1. [1]B. Keimer and J. E. Moore, The physics of quantum materials, Nature Physics 13, 1045 (2017).DOI
  2. [2]N. Kiyohara, T. Tomita, and S. Nakatsuji, Giant anomalous Hall effect in the chiral antiferromagnet Mn₃Ge, Phys. Rev. Appl. 5, 064009 (2016).DOI
  3. [3]D. F. Liu, A. J. Liang, E. K. Liu, Q. N. Xu, Y. W. Li, C. Chen, D. Pei, W. J. Shi, S. K. Mo, P. Dudin, T. Kim, C. Cacho, G. Li, Y. Sun, L. X. Yang, Z. K. Liu, S. S. P. Parkin, C. Felser, and Y. L. Chen, Magnetic Weyl semimetal phase in a kagomé crystal, Science 365, 1282 (2019).
  4. [4]B. R. Ortiz, S. M. L. Teicher, Y. Hu, J. L. Zuo, P. M. Sarte, E. C. Schueller, A. M. M. Abeykoon, M. J. Krogstad, S. Rosenkranz, R. Osborn, R. Seshadri, L. Balents, J. He, and S. D. Wilson, CsV₃Sb₅: A F₂ topological kagome metal with a superconducting ground state, Phys. Rev. Lett. 125, 247002 (2020).
  5. [5]J.-X. Yin, B. Lian, and M. Z. Hasan, Topological kagome magnets and superconductors, Nature 612, 647 (2022).DOI
  6. [6]Z. Lin, J.-H. Choi, Q. Zhang, W. Qin, S. Yi, P. Wang, L. Li, Y. Wang, H. Zhang, Z. Sun, L. Wei, S. Zhang, T. Guo, Q. Lu, J.-H. Cho, C. Zeng, and Z. Zhang, Flat-bands and emergent ferromagnetic ordering in Fe₃Sn₂ kagome lattices, Phys. Rev. Lett. 121, 096401 (2018).
  7. [7]L. Ye, M. Kang, J. Liu, F. von Cube, C. R. Wicker, T. Suzuki, C. Jozwiak, A. Bostwick, E. Rotenberg, D. C. Bell, L. Fu, R. Comin, and J. G. Checkelscky, Massive Dirac fermions in a ferromagnetic kagome metal, Nature 555, 638 (2018).DOI
  8. [8]M. Kang, L. Ye, S. Fang, J.-S. You, A. Levitan, M. Han, J. I. Facio, C. Jozwiak, A. Bostwick, E. Rotenberg, M. K. Chan, R. D. McDonald, D. Graf, K. Kaznatcheev, E. Vescovo, D. C. Bell, E. Kaxiras, J. van den Brink, M. Richter, M. Prasad Ghimire, J. G. Checkelscky, and R. Comin, Dirac fermions and flat bands in the ideal kagome metal FeSn, Nature Materials 19, 163 (2020).DOI
  9. [9]T. Kida, L. A. Fenner, A. A. Dee, I. Terasaki, M. Hagiwara, and A. S. Wills, The giant anomalous Hall effect in the ferromagnet Fe₃Sn₂ frustrated kagome metal, Journal of Physics: Condensed Matter 23, 112205 (2011).DOI
  10. [10]H. Zhang, C. Q. Xu, and X. Ke, Topological Nernst effect, and anomalous thermal Hall effect in the Dirac semimetal Fe₃Sn₂, Phys. Rev. B 103, L201101 (2021).DOI
  11. [11]F. Schilberth, N. Unglert, L. Prodan, F. Meggle, J. Ebad Allah, C. A. Kuntscher, A. A. Tsirlin, V. Tsurkan, J. Deisenhofer, L. Chioncel, I. Kézsmárki, and S. Bordács, Magneto-optical detection of topological contributions to the anomalous Hall effect in a kagome ferromagnet, Phys. Rev. B 106, 144404 (2022).DOI
  12. [12]L. A. Fenner, A. A. Dee, and A. S. Wills, Non-collinearity and spin frustration in the itinerant kagome ferromagnet Fe₃Sn₂, Journal of Physics: Condensed Matter 21, 452202 (2009).DOI
  13. [13]M. Altthaler, E. Lysne, E. Roede, L. Prodan, V. Tsurkan, M. A. Kassem, H. Nakamura, S. Krohns, I. Kézsmárki, and D. Meier, Magnetic and geometric control of spin textures in the itinerant kagome magnet Fe₃Sn₂, Phys. Rev. Res. 3, 043191 (2021).DOI
  14. [14]L. Kong, J. Tang, Y. Wu, W. Wang, J. Jiang, Y. Wang, J. Li, Y. Xiong, S. Wang, M. Tian, and H. Du, Diverse helicities of dipolar skyrmions, Phys. Rev. B 109, 014401 (2024).DOI
  15. [15]A. K. Gopi, A. K. Srivastava, A. K. Sharma, A. Chakraborty, S. Das, H. Deniz, A. Ernst, B. K. Hazra, H. L. Meyerheim, and S. S. Parkin, Thickness-tunable zoology of magnetic spin textures observed in Fe₅GeTe₂, ACS Nano 18, 5335 (2024).DOI
  16. [16]W. Wei, J. Tang, Y. Wu, Y. Wang, J. Jiang, J. Li, Y. Soh, Y. Xiong, M. Tian, and H. Du, Current-controlled topological magnetic transformations in a nanostructured kagome magnet, Advanced Materials 33, 2101610 (2021).DOI
  17. [17]J. Tang, J. Jiang, N. Wang, Y. Wu, Y. Wang, J. Li, Y. Soh, Y. Xiong, L. Kong, S. Wang, M. Tian, and H. Du, Combined magnetic imaging and anisotropic magnetoresistance detection of dipolar skyrmions, Advanced Functional Materials 33, 2207770 (2023).DOI
  18. [18]J. Wang, Mechanical control of magnetic order: From phase transition to skyrmions, Annual Review of Materials Research 49, 361 (2019).DOI
  19. [19]K. Shibata, J. Iwasaki, N. Kanazawa, S. Aizawa, T. Tanigaki, M. Shirai, T. Nakajima, M. Kubota, M. Kawasaki, H. S. Park, D. Shindo, N. Nagaosa, and Y. Tokura, Large anisotropic deformation of skyrmions in strained crystal, Nature Nanotechnology 10, 589 (2015).DOI
  20. [20]J.-M. Hu, T. Yang, and L.-Q. Chen, Strain-mediated voltage-controlled switching of magnetic skyrmions in nanostructures, npj Computational Materials 4, 62 (2018).DOI
  21. [21]M. T. Littlehales, L. A. Turnbull, M. N. Wilson, M. T. Birch, H. Popescu, N. Jaouen, J. A. T. Verezhak, G. Balakrishnan, and P. D. Hatton, Enhanced skyrmion metastability under applied strain in FeGe, Phys. Rev. B 106, 214434 (2022).DOI
  22. [22]K. Du, F.-T. Huang, K. Gamage, J. Yang, M. Mostovoy, and S.-W. Cheong, Strain-control of cycloidal spin order in a metallic van der Waals magnet, Advanced Materials 35, 2303750 (2023).DOI
  23. [23]C. Liu, J. Wang, W. He, C. Zhang, S. Zhang, S. Yuan, Z. Hou, M. Qin, Y. Xu, X. Gao, Y. Peng, K. Liu, Z. Q. Qiu, J.-M. Liu, and X. Zhang, Strain-induced reversible motion of skyrmions at room temperature, ACS Nano 18, 761 (2024).DOI
  24. [24]D. Kong, A. Kovács, M. Charilaou, F. Zheng, L. Wang, X. Han, and R. E. Dunin-Borkowski, Direct observation of tensile-strain-induced nanoscale magnetic hardening, Nature Communications 14, 3963 (2023).DOI
  25. [25]C. Yang, B. Zhang, L. Fu, Z. Wang, J. Teng, R. Shao, Z. Wu, X. Chang, J. Ding, L. Wang, and X. Han, Chemically inhomogeneity-induced profuse nanotwinning and phase transformation in aucu nanowires, Nature Communications 14, 5705 (2023).DOI
  26. [26]D. Li, Z. Wang, Y. Zhao, W. Zeng, Z. Zhang, S. Li, H. Lian, C. Yang, Y. Ma, L. Fu, Y. Guo, Z. Zhang, Y. Zhai, S. Mao, L. Wang, and X. Han, In situ atomic-scale quantitative evidence of plastic activities resulting in reparable deformation in ultrasmall-sized ag nanocrystals, ACS Nano 17, 23488 (2023).DOI
  27. [27]B. Malaman, D. Fruchart, and G. L. Caer, Magnetic properties of Fe₃Sn₂. ii. Neutron diffraction study (and Mossbauer effect), Journal of Physics F: Metal Physics 8, 2389 (1978).DOI
  28. [28]K. Heritage, B. Bryant, L. A. Fenner, A. S. Wills, G. Aeppli, and Y.-A. Soh, Images of a first-order spin-reorientation phase transition in a metallic kagome ferromagnet, Advanced Functional Materials 30, 1909163 (2020).arxiv.org/abs/1909.07768
  29. [29]G. He, L. Peis, R. Stumberger, L. Prodan, V. Tsurkan, N. Unglert, L. Chioncel, I. Kézsmárki, and R. Hackl, Phonon anomalies associated with spin reorientation in the kagome ferromagnet, physica status solidi (b) 259, 2100169 (2022).
  30. [30]R. P. Cowburn, A. O. Adeyeye, and M. E. Welland, Configurational anisotropy in nanomagnets, Phys. Rev. Lett. 81, 5414 (1998).DOI
  31. [31]A. Hubert and R. Schäfer, Magnetic domains: the analysis of magnetic microstructures (Springer Science & Business Media, 1998) pp. 1–706.
  32. [32]A. Kovács and R. E. Dunin-Borkowski, Handbook of magnetic materials (Elsevier, 2018) Chap. Magnetic Imaging of Nanostructures Using Off-Axis Electron Holography, pp. 59–153.DOI
  33. [33]J. Zhang, Y. Li, X. Li, Y. Zhai, Q. Zhang, D. Ma, S. Mao, Q. Deng, Z. Li, X. Li, X. Wang, Y. Liu, Z. Zhang, and X. Han, Timely and atomic-resolved high-temperature mechanical investigation of ductile fracture and atomistic mechanisms of tungsten, Nature Communications 12, 2218 (2021).DOI
  34. [34]R. Koch, C. Pampuch, H. Yamaguchi, A. K. Das, A. Ney, L. Däweritz, and K. H. Ploog, Magnetoelastic coupling of MnAs-GaAs(001) close to the phase transition, Phys. Rev. B 70, 092406 (2004).DOI
  35. [35]Z. Hou, W. Ren, B. Ding, G. Xu, Y. Wang, B. Yang, Q. Zhang, Y. Zhang, E. Liu, F. Xu, W. Wang, G. Wu, X. Zhang, B. Shen, and Z. Zhang, Observation of various and spontaneous magnetic skyrmionic bubbles at room temperature in a frustrated kagome magnet with uniaxial magnetic anisotropy, Advanced Materials 29, 1701144 (2017).
  36. [36]L. Kong, J. Tang, W. Wang, Y. Wu, J. Jiang, Y. Wang, J. Li, Y. Xiong, M. Tian, and H. Du, Observation of hybrid magnetic skyrmion bubbles in Fe3Sn2 nanodisks, Phys. Rev. B 107, 174425 (2023).DOI
  37. [37]J. Tang, Y. Wu, L. Kong, W. Wang, Y. Chen, Y. Wang, Y. Soh, Y. Xiong, M. Tian, and H. Du, Two-dimensional characterization of three-dimensional magnetic bubbles in Fe3Sn2 nanostructures, National Science Review 8, nwaa200 (2020).DOI
  38. [38]A. Vansteenkiste, J. Leliaert, M. Dvornik, M. Helsen, F. Garcia-Sanchez, and B. Van Waeyenberge, The design and verification of MuMax3, AIP Advances 4, 107133 (2014).DOI

Paper details

vlnc:W_9nnj4tjv
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents