WorksMathematics
Wasserstein Target Diagram for Model Evaluation
Abstract
The target diagram is often used in geosciences, which provides a visualization tool for model evaluation and shows the temporal or spatial matching of data. However, its construction requires paired data of equal sample sizes, limiting its application to model comparisons involving unpaired samples or probability distributions. In this study, we propose the Wasserstein target diagram based on the 2-Wasserstein distance from optimal transport. Unlike the original target diagram, the Wasserstein target diagram does not require paired data of equal sizes and evaluates models from the probability distribution perspective. We further establish that the two target diagrams coincide when the given paired data are comonotone, which is common in climate science, such as cumulative precipitation and solar radiation. Through two simulation studies and an application to wind speed distribution fitting, we demonstrate that the proposed diagram can detect the probability distribution discrepancies that the original target diagram may not distinguish. The Wasserstein target diagram therefore lifts the model evaluation to the probability level and provides a complementary approach to estimating the agreement in probability distributions.
Introduction
Evaluating the agreement between observations and model predictions is an important task in statistical modeling and scientific applications. Common evaluation measures often use statistical metrics to quantify the model prediction performance. For example, the bias of mean values measures systematic overestimation or underestimation, while the root mean squared error (RMSE) summarizes the overall magnitude of prediction errors. In the last two decades, the Taylor diagram [9] and the target diagram [8], which both visualize the evaluation metrics in a single diagram, have been widely used in model evaluation. The Taylor diagram uses the law of cosines to visualize the evaluation metrics, including correlation coefficient, centered root mean squared error (CRMSE), and variances of observed and predicted data. However, the Taylor diagram ignores the mean values. To solve this problem, the authors in [8] introduced the target diagram by decomposing RMSE into bias of mean values and CRMSE, which satisfy the Pythagorean theorem. The mathematical construction of the target diagram is as follows.
Given predicted data and observed data , the RMSE is given as
where and are the means of and , respectively. Let and be the centered data of and . Then
where Bias and CRMSE is the RMSE of centered data given by
and the cross term vanishes since
Given , define
Let and be the sample standard deviations of and , respectively. Then a point in the target diagram with respect to and has coordinates where
and .
When , , and we have the following Pythagorean theorem
Therefore, the radial distance from the point to the origin in the target diagram represents RMSE. The sign of the horizontal coordinate indicates whether the predictions have a larger or smaller standard deviation than the observations, while the sign of the vertical coordinate shows whether the predictions have a larger or smaller mean value than the observations. Therefore, the target diagram represents the spatial or temporal matching of predicted data to observations, and allows multiple models to be compared within a common coordinate system. The closer a model is to the origin in the target diagram, the smaller its RMSE and the better its performance. An illustration of the target diagram is presented in Figure 1 using six prediction samples of equal size generated from different distributions.
Figure 1. Target Diagram Example. The reference sample consists of observations generated from a normal distribution , with mean 4.940654 and standard deviation 1.501181. Predicted data are generated from six different distributions. All samples have equal size () and are paired with the reference. The horizontal coordinate represents the signed CRMSE, the vertical coordinate represents bias, and radial distance represents RMSE. Positive (negative) horizontal coordinates indicate that predicted data have larger (smaller) standard deviations than the reference. Positive (negative) vertical coordinates indicate that predicted data have larger (smaller) means than the reference.
The target diagram requires paired observed and predicted data of equal length, since RMSE and CRMSE are based on pointwise differences. Consequently, it cannot be directly applied when the two samples have different sizes or only observed data exist. Furthermore, in many applications, the objective is to compare probability distributions rather than paired observations, for example, how to choose the best model when observed data are fitted to different probability distributions. In such settings, RMSE is not directly applicable without introducing an artificial pairing. Motivated by this insight, we lift the target diagram into the probability distribution level and propose the Wasserstein target diagram to evaluate agreement in probability distributions. Relevant studies on the Taylor and Wasserstein Taylor diagrams can be found in [1]. The Wasserstein distance, originating from the optimal transport theory, provides a natural approach to comparing probability distributions [2]. In particular, for two probability measures and on with finite second moments, the 2-Wasserstein distance satisfies the decomposition
where and are the distribution means, and and denote the corresponding centered distributions. Similar to the role of Equation (1) for the target diagram, Equation (2) supports the construction of the Wasserstein target diagram.
The main contributions of this work are as follows. First, we develop the Wasserstein target diagram as a visual representation of the decomposition in Equation (2) and evaluate models from the probability distribution perspective. It can compare unpaired samples and samples of different sizes, and detect distributional discrepancies beyond the bias. Second, in Theorem 3.1, we show that the target diagram and the Wasserstein target diagram coincide if and only if the given data are comonotone, where the data are taken as equally weighted empirical distributions in the Wasserstein target diagram. Finally, we demonstrate the proposed approach through two simulation studies with equal and unequal sample sizes and an application to the distribution fitting of wind speed.
The rest of the paper is organized as follows. § 2 introduces the preliminaries of optimal transport and the Wasserstein distance. § 3 presents the construction and theoretical properties of the Wasserstein target diagram. § 4 illustrates the proposed diagram through simulation studies and a real-world data application in wind speed. Finally, § 5 provides the discussion and conclusion.
Preliminaries
Let denote the set of Borel probability measures on the real line , and let denote the set of Borel probability measures with finite second moments, i.e.,
Given and a Borel measurable map , the pushforward of by , denoted by , is defined by
for every Borel set . For , its mean and standard deviation are given as
The centered measure of is defined as where .
It is known that the 2-Wasserstein distance () from optimal transport is a metric on and is often used to quantify the similarities and discrepancies between probability distributions. See [2] for more details on the Wasserstein distance. Given , the 2-Wasserstein distance between and is given as
where is the set of transport couplings with marginals and defined as
and and are projections: for , and . Note that the 2-Wasserstein distance on has a quantile representation and is often used in numerical studies. Given , let and denote the associated cumulative distribution functions:
The generalized inverses of and , also called the quantile functions, are defined by
and
Then the 2-Wasserstein distance between and satisfies
In particular, given data and where may not equal , let and be the corresponding empirical measures, i.e., and . Then the associated quantile functions and are stepwise functions and have the form
where and are order statistics.
Let and , for and . The length of the intersection is
where . Therefore, Equation (5) implies
Especially, when , the 2-Wasserstein distance between and satisfies
Similar to the decomposition of squared RMSE, the squared 2-Wasserstein distance admits the following decomposition
where and are the centered measures of and , respectively. Furthermore, [3] showed that the distribution differences in terms of squared 2-Wasserstein distance can be decomposed into three parts, including bias (or location), size (or variability), and shape. That is,
where is the quantile correlation coefficient between and defined by
See [1, 4, 5] for more applications of such decomposition.
Wasserstein Target Diagram
Given predictions and observations , suppose and are corresponding sample means, and are associated sample standard deviations, and and are their centered data. Then we have the following decomposition
where , is the centered RMSE, with
Then the point in the target diagram for and has coordinates where
so that when , . Therefore, the radial distance from the point to the origin in the target diagram represents the associated RMSE.
The target diagram requires paired observed and predicted data of equal length, and cannot be directly applied when the two samples have different sizes. For example, only observed data exist in the wind speed distribution fitting [10], and the target diagram does not work. In contrast, the Wasserstein distance compares probability distributions directly and does not require paired data or equal sample sizes. This motivates us to lift the target diagram into the probability level via the Wasserstein distance and construct an analogous Wasserstein target diagram. The mathematical details are as follows.
Let with means and standard deviations , respectively. Let and denote their centered measures. Equation (8) shows that
Then the coordinates of a point in the Wasserstein target diagram with respect to and are given as
where is the signed centered 2-Wasserstein distance () between and , and is the bias. When , the coordinates satisfy
which shows that the radial distance from point to the origin in the Wasserstein target diagram represents the 2-Wasserstein distance .
Both the target diagram and Wasserstein target diagram use the bias as the vertical coordinate. For the horizontal coordinate and radial distance to the origin, the target diagram uses signed CRMSE and RMSE, while the Wasserstein target diagram uses signed centered 2-Wasserstein distance and 2-Wasserstein distance. Note that in target and Wasserstein target diagrams, the sign of horizontal coordinate indicates whether the predictions have a larger or smaller standard deviation than the observations, while the sign of the vertical coordinate indicates whether the predictions have a larger or smaller mean than the observations. In particular, the magnitude of the horizontal coordinate in the Wasserstein target diagram reflects discrepancies between the centered distributions, including distribution differences in size and shape (see Equations (8) and (9)). Figure 2 shows the comparison of target diagram and Wasserstein target diagram.
Figure 2. Comparison of the Target Diagram and Wasserstein Target Diagram. The target diagram evaluates models based on the temporal or spatial matching between predicted and observed data, while the Wasserstein target diagram is from the probability distribution perspective. Panel (a): Given data and with sample means and and different standard deviations and , the target diagram is constructed by the decomposition , where the horizontal and vertical coordinates are and the bias , respectively, where CRMSE is the centered RMSE. The radial distance to the origin is RMSE. Panel (b): Given probability distributions with means and and different standard deviations and , the Wasserstein target diagram is constructed by the decomposition , where the horizontal and vertical coordinates are and the bias , respectively. The radial distance is the 2-Wasserstein distance .
When evaluating models, the target diagram uses paired data of equal length and shows the spatial or temporal matching between predictions and observations, while the Wasserstein target diagram uses the 2-Wasserstein distance and compares the distribution similarities of used models to the reference. Therefore, the Wasserstein target diagram allows multiple probability distributions to be compared with a reference within a common coordinate system, and the closer a distribution is to the origin in the diagram, the smaller its 2-Wasserstein distance and the better its performance. Unlike the target diagram, the Wasserstein target diagram does not require paired observations or equal sample size and can be directly applied to evaluate the probability distribution fitting of given data. Furthermore, Theorem 3.1 shows that the target diagram and the Wasserstein target diagram coincide if and only if the given data and are comonotone, where the data are taken as equally weighted empirical measures in the Wasserstein target diagram. The proof is based on the rearrangement inequality. Recall that given and with order statistics and , that is,
the rearrangement inequality claims
where the equality holds if and only if and are comonotone, i.e.,
Then we have the following main result in this paper.
Theorem 3.1. Given data and with different standard deviations, let
The Wasserstein target diagram for and coincides with the target diagram for and if and only if and are comonotone, i.e.,
Proof. By Equation (7), the 2-Wasserstein distance between and satisfies
where and . Then by the rearrangement inequality,
and the equality holds if and only if and are comonotone, i.e.,
Suppose and are the means of and , and and are the associated centered data. Let and denote the centered measures of and , i.e.,
Then applying the same argument to and gives
and the equality holds if and only if
which means the equality holds if and only if and are comonotone. Therefore, under the comonotone condition,
Moreover,
where and are sample standard deviations of and , respectively. Then the target diagram and Wasserstein target diagram have the same vertical coordinate, horizontal magnitude, and horizontal sign. Hence, they coincide.
Conversely, if the target diagram and Wasserstein target diagram coincide, then the corresponding horizontal coordinates are the same, i.e.,
Note that , , and . Then and thus , which implies the equality condition in the rearrangement inequality:
In climate science, the cumulative climate variables indexed by time are nondecreasing and provide natural examples of comonotone structures, such as cumulative precipitation, accumulated runoff, and cumulative solar radiation. Therefore, for such cumulative variables, the Wasserstein target diagram just becomes the original target diagram. Note that when the given data and have the same sample standard deviations, i.e., , the horizontal coordinate is zero by the definition of the sign function, regardless of the value of or . Consequently, the point on the vertical axis may represent equal sample standard deviations, zero , or zero , and the radial distance does not necessarily equal or . This special case should be particularly considered when it appears in both target and Wasserstein target diagrams.
Applications of the Wasserstein Target Diagram
In this section, we illustrate the Wasserstein target diagram through two simulations and a wind speed application. The first simulation compares the target and Wasserstein target diagrams using observed and predicted samples of equal size. The second simulation considers unequal sample sizes, for which the original target diagram does not apply directly. Finally, we apply the Wasserstein target diagram to wind speed data to compare fitted probability distributions with observed data. Throughout this section, denotes a normal distribution parameterized by mean and variance, denotes a lognormal distribution parameterized by log-scale mean and variance, and and denote gamma and Weibull distributions parameterized by shape and scale, respectively. The parameters of these distributions in the simulation studies are also compared with the reference distribution. In addition, we use for the 2-Wasserstein distance.
Simulation with Equal Sample Sizes: Comparison of Target Diagrams
To illustrate the Wasserstein target diagram and compare it with the original target diagram, we generate an observed sample of size from a normal distribution , with theoretical mean 4 and standard deviation 2. The observed sample has a mean of 3.920872 and standard deviation of 2.001575. We independently generate nine prediction samples from the following distributions, each with the same sample size :
: the same underlying normal distribution as the observed sample.
: smaller mean 3 and standard deviation 1.5.
: larger mean 5 and standard deviation 2.5.
: larger mean 5 but smaller standard deviation 1.5.
: smaller mean 3 but larger standard deviation 2.5.
: a gamma distribution with shape parameter 5 and scale parameter 1, having larger mean 5 and larger standard deviation .
: a Weibull distribution with shape parameter 6 and scale parameter 4, having smaller mean and standard deviation .
: a lognormal distribution with log-scale mean 1.5 and log-scale standard deviation 0.45, having larger mean and standard deviation .
: an equally weighted mixture , having larger mean 4.5 but smaller standard deviation .
As the sample generation suggests, the predicted samples are generated from the same distribution as the observed samples, which means that the corresponding 2-Wasserstein distance () is small, but their RMSE may remain large because it depends on the pointwise pairing. In this case, the Wasserstein target diagram can detect the distributional similarities between predicted and observed data, but the target diagram cannot, as shown in Table 1 and Figure 3. Table 1 shows the biases, signed centered 2-Wasserstein distances, and 2-Wasserstein distances between predicted and observed data, where the 2-Wasserstein distance is computed by Equation (7). Figure 3 further shows the associated target diagram and Wasserstein target diagram. It can be seen from the Wasserstein target diagram that the predicted samples are closest to the origin, with a 2-Wasserstein distance of 0.173417. In contrast, the target diagram does not identify the prediction as the closest to the origin, since the prediction has larger RMSE and CRMSE with values of 2.815418 and 2.813784, respectively. This occurs because RMSE and CRMSE depend on the pointwise pairing of data but two independently generated samples have no natural one-to-one correspondence. Consequently, the target diagram does not identify that
| Models | Signed centered | Bias | ||
| 1,000 | -0.144483 | 0.095907 | 0.173417 | |
| 1,000 | -0.537894 | -0.905342 | 1.053078 | |
| 1,000 | 0.492475 | 1.245325 | 1.339166 | |
| 1,000 | -0.506116 | 1.168765 | 1.273642 | |
| 1,000 | 0.463521 | -0.967032 | 1.072382 | |
| 1,000 | 0.468985 | 1.073327 | 1.171315 | |
| 1,000 | -1.314335 | -0.222236 | 1.332991 | |
| 1,000 | 0.788539 | 1.125171 | 1.373974 | |
| 1,000 | -0.763342 | 0.590595 | 0.965139 |
Table 1. Wasserstein Target Diagram Measures for Samples of Equal Size. The reference sample consists of observations from the normal distribution , with a sample mean 3.920872 and standard deviation 2.001575. The predicted sample generated from each distribution also contains 1,000 data points.
Figure 3. Target Diagram and Wasserstein Target Diagram for Samples of Equal Size. The reference consists of 1,000 observations from the normal distribution , and other predicted samples have the same size. The predicted sample lies closest to the origin in the Wasserstein target diagram, but not in the target diagram. This shows the usefulness of Wasserstein target diagram for probability distribution comparison, even for samples from the same distribution.
the prediction has the highest similarity with the observed data, while the Wasserstein target diagram shows such identification. The remaining predictions in the Wasserstein target diagram exhibit larger distances to the origin due to differences in their biases, sizes, and shapes. For example, the Weibull prediction has a relatively small bias of -0.222236 but a large centered 2-Wasserstein distance of 1.314335, indicating that bias alone does not adequately characterize its distributional discrepancy with the observed data. These results illustrate the usefulness of the Wasserstein target diagram for comparing probability distributions, even when samples are independently generated from the same distribution.
Simulation with Unequal Sample Sizes: Distribution Comparison
To illustrate the application of Wasserstein target diagram to samples of unequal sizes, we generate a reference sample of size from a gamma distribution as the observed data. The reference distribution has theoretical mean 4 and standard deviation 2, while the generated sample has a mean 4.024726 and standard deviation 1.997160. We independently generate nine other samples from the following distributions as predicted data:
: , the same underlying gamma distribution as the observed sample.
: , smaller mean 3.2 and standard deviation 1.6.
: , larger mean 4.8 and standard deviation 2.4.
: , larger mean 4.5 but smaller standard deviation 1.5.
: , a gamma distribution shifted by 1, having larger mean 5 but the same standard deviation 2.
: , a Weibull distribution with shape parameter 2 and scale parameter 4.5, having a slightly smaller mean but a slightly larger standard deviation .
: , a lognormal distribution with log-scale mean 1.285 and log-scale standard deviation 0.45, having mean and smaller standard deviation .
: , a normal distribution with the same theoretical mean 4 and standard deviation 2 as the reference distribution.
: , an equally weighted mixture , having the same mean 4 but smaller standard deviation .
Table 2 summarizes the resulting measures, where the 2-Wasserstein distance is calculated by Equation (6), and Figure 4 presents the corresponding Wasserstein target diagram. Note that the prediction generated from is closest to the origin in the diagram, with a 2-Wasserstein distance of 0.058370, despite the sample size being doubled compared to the observation. This is because the predicted and observed data follow the same distribution. The prediction appears in the lower-left region because of its smaller mean and standard deviation, whereas appears in the upper-right region. The prediction combines a larger mean with smaller variability and appears in the upper-left region. The shifted Gamma prediction has a bias of 0.997958 but a centered 2-Wasserstein distance of only 0.050082, indicating a discrepancy primarily associated with bias.
| Prediction distribution | Size | Signed centered | Bias | |
| 20,000 | 0.043151 | -0.039307 | 0.058370 | |
| 15,000 | -0.400569 | -0.821487 | 0.913945 | |
| 25,000 | 0.364501 | 0.740879 | 0.825689 | |
| 18,000 | -0.525069 | 0.488746 | 0.717336 | |
| 22,000 | 0.050082 | 0.997958 | 0.999214 | |
| 30,000 | 0.185145 | -0.044270 | 0.190364 | |
| 25,000 | -0.222552 | -0.024330 | 0.223878 | |
| 35,000 | -0.457811 | -0.029927 | 0.458788 | |
| Bimodal | 40,000 | -0.854919 | -0.024787 | 0.855278 |
Table 2. Wasserstein Target Diagram Measures for Samples of Unequal Sizes. The reference sample consists of observations from the Gamma distribution , with a sample mean 4.024726 and standard deviation 1.997160. Predicted sample sizes are listed in the second column.
Figure 4. Wasserstein Target Diagram for Samples of Different Sizes. The reference sample consists of observations from , with a mean 4.024726 and standard deviation 1.997160. The horizontal coordinate represents the signed centered 2-Wasserstein distance (signed centered ), the vertical coordinate represents the bias, and the radial distance represents the 2-Wasserstein distance (). The prediction with has the highest distribution similarity with the reference since it is closest to the origin.
The Weibull, lognormal, normal, and bimodal predictions have small absolute biases but different centered 2-Wasserstein distances. In particular, the normal distribution has the same theoretical mean and standard deviation as the reference, but its centered 2-Wasserstein distance is 0.457811, demonstrating its sensitivity to shape beyond the first two moments. Its negative horizontal coordinate reflects a standard deviation slightly below that of the reference sample. The bimodal distribution also has theoretical mean 4, but its centered 2-Wasserstein distance of 0.854919 reflects distribution differences in both size and shape.
Wind Speed Data: Comparison of Fitted Distributions
Accurate modeling of wind speed distributions is important for a variety of applications, including building design and wind energy assessment [10]. A key task is to compare which candidate probability distribution can accurately estimate the wind speed distribution, and the Wasserstein target diagram provides a direct assessment for such distribution comparison. In this section, we use processed wind speed data described in [10], which are hourly averaged wind speed measurements collected at a height of 80 meters (m) from the year 2010 to 2020 at the Flatirons M2 meteorological tower, located about 8 kilometers south of Boulder, Colorado, USA [7, 6]. The observed sample contains measurements, with a mean 4.638 m/s and a standard deviation of 3.474 m/s.
We compare ten fitted distributions using the maximum likelihood estimates reported in Table 4 of [10], including beta-generalized Lindley (BGL), beta-exponential (BE), beta-Weibull (BW), beta-Lindley (BL), generalized Lindley (GL), Lindley (L), lognormal (LogN), gamma (GAM), Weibull (W), and generalized extreme value (GEV) distributions. Their notation and probability density functions appear in Table 3 of the same reference [10]. To find the 2-Wasserstein distance between each fitted distribution and the empirical distribution of wind speed, we first generate a sample of the same size from each fitted distribution and then use Equation (7) to calculate the corresponding 2-Wasserstein distance.
| Model | Signed centered | Bias | |
| BGL | 0.102954 | -0.006219 | 0.103142 |
| BE | -0.216582 | -0.000999 | 0.216585 |
| BW | -0.219444 | -0.002562 | 0.219459 |
| BL | -0.266436 | -0.002081 | 0.266444 |
| GL | -0.610161 | -0.023248 | 0.610604 |
| L | 0.446706 | -0.003918 | 0.446723 |
| LogN | 0.752523 | 0.080740 | 0.756842 |
| GAM | -0.518327 | 0.003346 | 0.518338 |
| W | -0.623616 | 0.030635 | 0.624368 |
| GEV | 1.086230 | 0.040883 | 1.086999 |
Table 3. Wasserstein Target Diagram Measures for Distribution Fitting of Wind Speed. The observed wind speed sample has a mean of 4.638 and a standard deviation of 3.474. The fitted parameters of candidate distributions are the maximum likelihood estimates in Table 4 of [10].
Table 3 summarizes the signed centered 2-Wasserstein distance, bias, and 2-Wasserstein distance for each probability distribution, and Figure 5 presents the corresponding Wasserstein target diagram. In the diagram, all the models are close to the horizontal axis, which means that the fitted distributions generally have small biases. Therefore, absolute bias alone provides limited information to evaluate the candidate distributions. For example, BE has a smaller absolute bias than BGL (0.000999 versus 0.006219), but BGL has a smaller centered 2-Wasserstein distance (0.102954 versus 0.216582) and 2-Wasserstein distance (0.103142 versus 0.216585) than BE. Furthermore, BGL is closest to the origin in the Wasserstein target diagram, with the smallest 2-Wasserstein distance (0.103142) among the fitted distributions, followed by BE and BW, with BW having a distance of 0.219459. GEV and LogN have the largest 2-Wasserstein distances (1.086999 and 0.756842). This means that BGL has the best performance in the wind speed distribution fitting among all candidate distributions, which also aligns with the results in [10].
Figure 5. Wasserstein Target Diagram for Distribution Fitting of Wind Speed. The reference wind speed sample has mean 4.638 and standard deviation 3.474. The horizontal coordinate represents the signed centered 2-Wasserstein distance (signed centered ), the vertical coordinate represents the bias, and the radial distance represents the 2-Wasserstein distance (). Ten distributions are compared and BGL has the best performance, since it is closest to the origin and has the smallest 2-Wasserstein distance.
Discussion and Conclusion
In this paper, we lift the target diagram to the probability distribution level and propose the Wasserstein target diagram to compare the probability distributions of different models. The original target diagram evaluates errors between paired data of equal sample sizes, and shows the spatial or temporal matching between predicted and observed data. The Wasserstein target diagram instead provides a visual tool to compare probability distributions, and extends the applicability of target diagrams to settings involving unpaired samples, samples of different sizes, and probability distribution fitting to only observed data. Therefore, the choice between the target diagram and Wasserstein target diagram depends on the evaluation objective. Furthermore, Theorem 3.1 shows that the target diagram and the Wasserstein target diagram coincide if and only if the given data are comonotone, which is often seen for cumulative climate variables indexed by time.
The two simulation studies in § 4 illustrate the Wasserstein target diagram for samples with equal and unequal sizes. The equal-size simulation shows that the Wasserstein target diagram can capture distributional similarities between independent samples drawn from the same distribution, which have a small Wasserstein distance but a large RMSE. The unequal-size simulation demonstrates the probability comparisons of Wasserstein target diagram without a one-to-one correspondence between data. The real data application on wind speed further illustrates how the diagram distinguishes fitted distributions with small biases.
Note that the Wasserstein target diagram uses the bias, the sign of size (variability), and the centered 2-Wasserstein distance from the decomposition of 2-Wasserstein distance in Equation (9). This means that the magnitude of the size and the shape of the distributions are hidden in the Wasserstein target diagram. A natural modification is to include distribution size or shape information in the Wasserstein target diagram via using different sizes or face colors of the markers.
Data Availability
The code and data used in this paper can be found at the following link https://github.com/tiantiy/Wasserstein-Target-Diagram.
References
Department of Mathematics and Statistical Science, University of Idaho, Moscow, ID, USA, 83844 Email address: [email protected]
Department of Mathematics and Statistical Science, University of Idaho, Moscow, ID, USA, 83844 Email address: [email protected]
References
- [1]Dongwei Chen, Emily J King, and Hungjui Yu. Taylor diagram and Wasserstein distance for model evaluation. arXiv preprint arXiv:2609.17950, 2026.arxiv.org/abs/2609.17950
- [2]Alessio Figalli and Federico Glaudo. An Invitation to Optimal Transport, Wasserstein Distances, and Gradient Flows. Number 22 in EMS Textbooks in Mathematics. EMS Press, Berlin, Germany, 2021.DOI
- [3]Antonio Irpino and Elvira Romano. Optimal histogram representation of large data sets: Fisher vs piecewise linear approximations. Revue des nouvelles technologies de l’information, 1:99–110, 2007.
- [4]Antonio Irpino and Rosanna Verde. Basic statistics for distributional symbolic variables: a new metric-based approach. Advances in Data Analysis and Classification, 9(2):143–175, 2015.DOI
- [5]Antonio Irpino and Rosanna Verde. Linear regression for numeric symbolic variables: a least squares approach based on Wasserstein Distance. Advances in Data Analysis and Classification, 9(1):81–106, 2015.DOI
- [6]David Jager and Afshin Andreas. M2 meteorology tower dataset. https://midcdmz.nlr.gov/apps/sitehome.pl?site=NWTC. [Online; accessed 15-November-2026].
- [7]David Jager and Afshin Andreas. NREL National Wind Technology Center (NWTC): M2 Tower; Boulder, Colorado (Data). Technical report, National Renewable Energy Lab (NREL), Golden, CO, United States, 1996.DOI
- [8]Jason K Jolliff, John C Kindle, Igor Shulman, Bradley Penta, Marjorie AM Friedrichs, Robert Helber, and Robert A Arnone. Summary diagrams for coupled hydrodynamic-ecosystem model skill assessment. Journal of Marine Systems, 76(1-2):64–82, 2009.DOI
- [9]Karl E Taylor. Summarizing multiple aspects of model performance in a single diagram. Journal of geophysical research: atmospheres, 106(D7):7183–7192, 2001.DOI
- [10]Tiantian Yang and Dongwei Chen. Beta-generalized Lindley distribution: A novel probability model for wind speed. Renewable Energy, page 124216, 2025.arxiv.org/abs/2503.09912




