betaFeedback

WorksPhysics and Astronomy

Engineering van der Waals heterostructures for dispersion-selective meV-scale quantum sensing

Abstract

Quantum sensing of meV-scale scattering and absorption of impinging particles with electrons in solid state detectors is a challenging technological advancement with the potential to enable breakthroughs in quantum information applications and studies of fundamental physics. However, a key obstacle for current sensing schemes is the difficulty in distinguishing the signals from particles of interest and from intrinsic excitations, like phonons or magnons. Here we propose a technique to selectively detect impinging particles based not only on their imparted energy, but specifically by their dispersion relations. By harnessing interfacial orbital hybridization in van der Waals heterostructures of Dirac materials, interlayer charge transfer may be promoted only for pre-selected impinging particles of interest. Using first-principles density functional theory (DFT) calculations of heterostructures of the layered Dirac materials ZrTe5 and HfTe5, we examine the effects of strain and layer number for successfully tuning orbital hybridization in their electronic structure. We demonstrate a proof-or-principle feasibility study for using Dirac materials to construct dispersion filters to be leveraged for next-generation meV-scale quantum sensors.

Introduction

Many next-generation technologies, spanning quantum key distribution, biomedical imaging, and detection of cosmological particles like light dark matter depend upon reliable sensing of meV-scale phenomena [1, 2, 3, 4, 5, 6, 7, 8]. Narrow band gap solid-state detectors that leverage electron scattering or absorption of impinging particles have the potential to be excellent platforms for development of tunable meV-scale quantum sensors. Electrons, as fermions, are not subject to the obstacles associated with boson-mediated meV-scale energy thresholds; specifically, electron excitations bypass timescale challenges associated with excited phonons rapidly decaying into lower energy phonons with a continuum of possible energies due to the linear dispersion of acoustic phonons. An excited electron in the conduction band of a narrow gap semiconductor has fewer allowed states to decay to. A material can be selected to have a band gap at the energy scale corresponding to interactions between electrons and an impinging particle of interest, as has been demonstrated in prior studies [6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24]. When this type of particle impinges on the detector material electrons are excited from the valence band to the conduction band producing a signal that is read out. Solid-state detector platforms can also be doped or strained to further refine their band gaps to the required energies. The detector physics community has actively developed a suite of tools for reading out electronic excitation signals of rare events in solid-state detector platforms via charge amplification schemes [11, 25, 27, 28, 29] [26].

A key challenge in quantum sensing at the meV-scale, however, is the broad diversity of excitations that could produce false positive signals. Intrinsic excitations (e.g. phonons and magnons) and extrinsically-induced excitations (e.g. infrared photons or cosmological particles) are all capable of inducing meV-scale excitations in a solid-state detector. Erroneous signals from intrinsic excitations are generically stymied by performing experiments at extreme cryogenic temperatures. Background extrinsic excitations can be suppressed by performing the detection experiment in extreme isolation, such as at the bottom of a deep mine where ambient electromagnetic waves cannot penetrate deep enough into the Earth’s crust to induce false signals. This strategy has been employed widely in the cosmological physics field, including for detection of particles of dark matter or neutrinos [11, 15, 30] [26]. However, this approach to removing background signals imposes inherent limitations on how many experiments can be conducted and how often.

For quantum sensing of particles in more terrestrial setting, there is a need for detection schemes that can straightforwardly distinguish between the desired particles and background sources of electronic excitation. In this work we outline a scheme to selectively detect particular impinging particles by engineering materials platforms that can detect both the energy and the momentum transferred from the impinging particle to the excited electron. This scheme leverages orbital hybridization across heterostructures of van der Waals (vdW) materials. With knowledge of the dispersion relations of the impinging particle of interest, a quantum sensor can be engineered that selectively detects particles that impart the correct combination of energy and momentum. Here we offer a proof-of-principle example vdW heterostructure of layered Dirac materials that can be tuned to act as such a ”dispersion filter” for quantum sensing.

Theoretical Framework

The proposed detector architecture is built on a vdW heterostructure of two layered materials that each have distinct band gaps. The particle of interest impinges on the first layer producing excited electrons and holes. If and only if that impinging particle has the correct dispersion relations (allowed energy and momentum transfer), an excited electron (or hole) will transfer to the second layer (Figure 1). The presence of the excited carrier in the second layer will signal that the desired particle of interest has been detected. Read out can be accomplished by charge amplification schemes already in use in the detector community which can resolve single-digit numbers of excited carriers [11, 25, 27, 28, 29] [26].

Simplified real-space schematic of detector setup

Figure 1. Simplified Real-space schematic of detector setup. An impinging particle produces excited electrons and holes in the top layer. An excited electron rapidly transfers to the bottom layer only if the impinging particle had the correct dispersion relations. Otherwise carriers remain in the top layer and recombine.

For interlayer charge transfer to occur in multilayer vdW materials, carriers must tunnel through the interlayer vacuum region. Generically, charge transfer across a vacuum region should occur much more slowly than bulk or intralayer transport.

However, as has been demonstrated in multilayers of transition metal dichalcogenides (TMDs), ultrafast charge transfer can be facilitated by interlayer orbital overlap. An illustration of how this manifests in the bulk TMD MoS2_2 is illustrated in the Supplementary Information (Figure S1). A representative example of this phenomenon occurring in a heterobilayer TMD, constructed of two distinct TMDs, was demonstrated by Sood, et al. [31]. In heterobilayer WS2_2 and WSe2_2 there is a band offset between the direct gaps of each monolayer

Band structures and orbital character of monolayer and bulk MoS$_2$

Figure S1. The band structures of monolayer and bulk MoS2_2. (a) In the band structure for monolayer MoS2_2 the valence band maximum (VBM) and conduction band minimum (CBM) are both located at the high symmetry (KK point. (b) The orbital character of the VBM is entirely in-plane (orbitals are illustrated in green). (c) In the band structure for bulk MoS2_2 the VBM is located at the high symmetry (Γ\Gamma point and CBM is located at a minimum in the (Λ\Lambda valley. (d) The orbital character of VBM and CBM in bulk MoS2_2 includes strong out-of-plane contributions (orbitals are illustrated in purple). This leads to interlayer hybridization.

with the valence band maximum (VBM) and conduction band minimum (CBM) of WSe2_2 shifted to higher energy than those of WS2_2 (see Supplementary Information, Figure S2). The band gap of WSe2_2 is smaller than that of WS2_2 enabling selective optical excitation of WSe2_2. When WSe2_2 is optically excited, the excited electrons and holes initially exist only in the WSe2_2 layer. The CBM of WS2_2 is at lower energy than that of WSe2_2, but in order for an electron to decay to the WS2_2 conduction band state interlayer charge transfer through the vacuum layer must occur. In principle this would be expected to occur slowly, however the electronic structure of heterostructures are greater than the sum of their parts. The electron in the CBM of WSe2_2 can rapidly decay to the CBM of WS2_2 by passing first through a hybridized state in the Λ\Lambda valley whose orbital character spans both layers [31]. An illustration of this process can be found in the Supplementary Information (Figure S3). The broad implication is that hybridized conduction states are a key tool for facilitating rapid interlayer charge transfer.

Band offset between WSe$_2$ and WS$_2$ in a heterobilayer

Figure S2. Band offset between WSe2_2 and WS2_2 in a heterobilayer. When (a) an electron in WSe2_2 is optically excited to the CBM of WSe2_2, it rapidly tunnels through the van der Waals gap between the two layers to (b) the CBM of WS2_2. This phenomenon was measured in [31].

The mechanism by which an excited electron in the CBM of WSe$_2$ rapidly tunnels to the CBM of WS$_2$

Figure S3. The mechanism by which an excited electron in the CBM of WSe2_2 rapidly tunnels to the CBM of WS2_2. (a) The electron is optically excited from the VBM to the CBM of WSe2_2. (b) The electron in the CBM of WSe2_2 releases a phonon and decays to the strongly hybridized minimum of the Λ\Lambda valley, which has orbital character spanning both layers. (c) The electron in the Λ\Lambda valley, which is already resonantly present in WS2_2, releases another phonon and decays to the CBM of WS2_2. This phenomenon has been described in detail in [31].

The scheme proposed in this work reverse-engineers this concept. The electronic structure of the detector heterostructure (Figure 2) is such that the orbital character of the valence band maximum (VBM) is entirely restricted to the first layer and the orbital character of the conduction band minimum (CBM) is entirely restricted to the second layer. There is a valley in the conduction band, of slightly higher energy, that is of hybridized orbital character, with its wavefunction spanning both layers. The particle that one seeks to detect has appropriate dispersion relations to impart the correct combination of energy (ω\omega) and momentum (q\mathbf{q}) to excite an electron from the VBM in layer 1 into the hybridized state (circled region of conduction band in Figure 2). Once there, because the wavefunction of the hybridized state that the excited electron occupies spans both layers, it readily decays to the CBM of layer 2. The presence of excess carriers in layer 2 signals that a particle with the correct dispersion relations has been detected. Read out of this signal would be achieved using charge amplification schemes, such as those used in rare event detection schemes used in dark matter searches [11, 25, 27, 28, 29] [26].

Reciprocal space and real space schematics of proposed detection scheme

Figure 2. Reciprocal space (top panels) and real space (bottom panels) schematics of proposed detection scheme. A valence electron at the VBM in layer 1 (top layer in real space panels) is excited to a hybridized state in the conduction band with orbital character spanning both layers. The excited electron then decays into the CBM and occupies an orbital that is entirely in layer 2 (bottom layer in real space panels). This process can only occur if the electron was excited by an impinging particle with the correct dispersion relations (combination of transferred energy (ω\omega) and transferred momentum (qq) (center reciprocal space panel)

The band gaps of the widely studied TMDs in the 2H structure are generally on the order of ∼eV\sim\mathrm{eV}, which is too large to be sensitive to meV-scale impinging particles. To target meV-scale detectors, vdW materials with smaller band gaps are required. In this work we target the isostructural layered Dirac materials ZrTe5_5 and HfTe5_5. Monolayer versions of these materials are displayed in Figure 3(a)(Figure 3b). These materials have been broadly studied in the bulk form. They exhibit a topological phase transition from a weak topological insulator, to a topological semimetal, to a strong topological insulator, which has been measured to be highly tunable, especially via strain [32, 33, 34, 35, 36, 37, 38]. Crystals as grown, in their unstrained geometry, are generally weak topological insulatorslators with band gaps on the order of a couple dozen meV [33, 34, 36, 37, 38]. Their tunability and small band gaps render them a useful starting point for exploring meV-scale dispersion filter vdW heterostructure detectors.

Crystal structures and corresponding band structures of monolayer ZrTe5 and HfTe5

Figure 3. Crystal structures of (a) monolayer ZrTe5\mathrm{ZrTe}_{5} and (b) monolayer HfTe5\mathrm{HfTe}_{5} and their corresponding band structures (c) and (d), respectively.

Calculation Details

First-principles calculations are performed using density functional theory (DFT) with a plane-wave basis and projector augmented wave (PAW) pseudopotentials [39] as implemented in the Vienna ab initio simulation package (VASP) [40, 41]. Calculations are performed in the generalized gradient approximation (GGA) as implemented by Perdew, Burke, and Ernzerhof (PBE) [42] with additional vdW dispersion forces approximately accounted for via the Grimme-D3 method [43]. The crystal structures of ZrTe5_5, HfTe5_5, and their heterostructures are relaxed using a 500 eV energy cutoff and 18×1×618 \times1 \times6 Γ\Gamma-centered kk-mesh until forces are converged to <1< 1 meV/Å. To prevent interactions between periodic images of the monolayers and heterostructures along the out-of-plane bb-axis, at least 20 Å of vacuum is included in the out-of-plane direction. The calculated in-plane lattice parameters for monolayer ZrTe5_5 are a=4.03a = 4.03 Å and c=13.71c = 13.71 Å, in good agreement with experimental values (a=3.99a = 3.99 Å, c=13.72c = 13.72 Å) [44]. The calculated lattice parameters for monolayer HfTe5_5 are a=4.01a = 4.01 Å and c=13.67c = 13.67 Å, in reasonably good agreement with experimental values (a=3.97a = 3.97 Å, c=13.73c = 13.73 Å) [44]. The calculated lattice parameters of the heterobilayer of ZrTe5_5 and HfTe5_5 are a=4.02a = 4.02 Å, b=12.72b = 12.72 Å, and c=13.66c = 13.66 Å. This corresponds to effective strains of −0.2%-0.2\% and +0.2%+0.2\% along the in-plane aa-axis and −0.4%-0.4\% and ∼0.0%\sim0.0\% along the in-plane cc-axis for ZrTe5_5 and HfTe5_5, respectively. Biaxial strain is applied by expanding and fixing the in-plane (aa- and cc-axis) lattice parameters then allowing the internal coordinates of the heterostructure to relax. Both the geometry relaxations and band structures are calculated with spin-orbit coupling (SOC).

Results

A series of electronic structure calculations are performed on the representative isostructural layered Dirac materials ZrTe5_5 and HfTe5_5 (Figure 3(a,Figure 3b)). These materials are well-known to have highly tunable electronic and topological properties, in particular under applied strain [32, 33, 34, 35, 36, 37, 38, 45, 46].

The DFT band structures of monolayer ZrTe5_5 and HfTe5_5 (Figure 3(c,Figure 3d)) have calculated band gaps of 126 and 106 meV respectively. In previous work by Peterson, et al. [38], the band structures of bulk ZrTe5_5 and HfTe5_5 were calculated using the same DFT methodology as employed in this work, yielding band gaps of 27 and 24 meV respectively. The order of magnitude increase in band gap moving from bulk crystals to monolayers indicates layer number is another powerful tuning knob for engineering the electronic structure of these materials, consistent with results observed for other layered vdW materials [47, 48, 49, 50].

The band structure of heterobilayer ZrTe5\mathrm{ZrTe}_{5} and HfTe5\mathrm{HfTe}_{5} with layer-resolved orbital projections (Figure 4(a) is plotted in Figure 4(d). The band gap of this heterostructure is 72 meV, of intermediate value between the bulk and monolayer band gaps. Unfortunately for the purposes of the proposed detector scheme, the VBM of this heterobilayer is highly hybridized with orbital character spanning both layers rendering it undesirable for dispersion selective interlayer charge transfer.

Crystal structures and electronic structures of various ZrTe5-HfTe5 heterostructures

Figure 4. Crystal structures and electronic structures of various ZrTe5\mathrm{ZrTe}_{5}-HfTe5\mathrm{HfTe}_{5} heterostructures: (a,d) monolayer ZrTe5\mathrm{ZrTe}_{5} with monolayer HfTe5\mathrm{HfTe}_{5}, (b,e) bilayer ZrTe5\mathrm{ZrTe}_{5} with bilayer HfTe5\mathrm{HfTe}_{5}, and (c,f) monolayer ZrTe5\mathrm{ZrTe}_{5} with monolayer HfTe5\mathrm{HfTe}_{5} under 3% tensile strain. The band structures are colored according to orbital projections onto each layer with purple indicating wavefunctions primarily confined to ZrTe5\mathrm{ZrTe}_{5} and green indicating wavefunctions primarily confined to HfTe5\mathrm{HfTe}_{5}. Lighter colored and white areas have hybridized wavefunctions with contributions from orbitals that span both layers.

The band structure of a heterostructure of bilayer ZrTe5\mathrm{ZrTe}_{5} and bilayer HfTe5\mathrm{HfTe}_{5} (Figure 4(b) exhibits a very substantial reduction in band gap to 27 meV. This result is consistent with the known sensitivity of vdW materials to number of layers and demonstrates that this property can be used as another tuning knob to control the excitation energy threshold. However, the persistence of hybridization in the VBM again renders this heterostructure undesirable for dispersion selective interlayer charge transfer.

The final tuning knob explored is epitaxial strain. The band structures of the heterobilayer under both compressive and tensile biaxial strain up to ±3%\pm3\% were calculated and the orbital character of the bands was analyzed (see Supplementary Information Figures S4 and S5). At 3%3\% tensile biaxial strain the band structure of the heterobilayer of monolayer ZrTe5\mathrm{ZrTe}_{5} and monolayer HfTe5\mathrm{HfTe}_{5} (Figure 4(c) exhibits a substantial change in the orbital character of the band extrema near the gap. The VBM is at the Y high symmetry point and consists primarily of orbitals localized on ZrTe5\mathrm{ZrTe}_{5}. The CBM located between the Z and U high-symmetry points consists primarily of orbitals localized on HfTe5\mathrm{HfTe}_{5}. At slightly higher energy than the CBM are hybridized states near the Y and Γ\Gamma high symmetry points. This combination of orbital character at the VBM, CBM, and slightly higher energy points along the CB matches the combination in the theoretical framework outlined in Figure 2. These results illustrate the potential feasibility of engineering narrow band gap vdW heterostructures for meV-scale ”dispersion filter” particle detectors.

Summary

In this work we outline a novel framework for meV-scale particle detection. The key innovation is that our detection scheme is designed to circumvent false positive results by restricting positive signals to interactions between electrons and impinging particles with a predetermined dispersion relation, meaning the combinations of energy and momentum that the impinging particle’s dispersion rules allow. The key to the development of this ”dispersion filter” scheme is interlayer orbital hybridization in vdW layered heterostructures. We provide a proof-of-principle demonstration using first-principles calculations showing that the electronic structure of vdW heterostructures of layered Dirac materials can be tuned to have the appropriate orbital hybridization to promote dispersion-selective interlayer charge transfer. Here we

use DFT to study the electronic structure of heterobilayers of ZrTe5\mathrm{ZrTe}_{5} and HfTe5\mathrm{HfTe}_{5} and show that under 3% tensile biaxial strain the VBM adopts ZrTe5\mathrm{ZrTe}_{5} orbital character, the CBM adopts HfTe5\mathrm{HfTe}_{5} orbital character, and the region of the CB slightly above the CBM has highly hybridized orbital character, spanning both layers.

These results open a pathway to selectively detect particles of interest without requiring the extreme methods that state-of-the-art particle detectors require for background elimination. In principle, a dispersion-selective detector built from narrow band gap materials could be used under cryogenic tabletop conditions, substantially reducing the cost associated with background signal removal. This type of detector could open a new field of detector physics because it possesses the power to easily differentiate between impinging particles with the same energy but different momenta. This proof-of-principle result has the potential to open a new pathway to tackle the broad array of applications that are dependent upon meV-scale quantum sensing.

Acknowledgements

This work was supported by the U.S. DOE NNSA under Contract No. 89233218CNA000001. The work was funded by the LANL LDRD Program through the Institute for Materials Science (IMS) Rapid Response program and project number 20220135DR. This work was supported in part by the Center for Integrated Nanotechnologies, a DOE Office of Science user facility, in partnership with the LANL Institutional Computing Program for computational resources. Additional computations were performed at the National Energy Research Scientific Computing Center (NERSC), a U.S. Department of Energy Office of Science User Facility located at Lawrence Berkeley National Laboratory, operated under Contract No. DE-AC02-05CH11231 using NERSC award ERCAP0020494.

References

Band structures of heterobilayers under biaxial tensile strain

Figure S4. Band structures of heterobilayers of monolayer ZrTe5\mathrm{ZrTe}_{5} with monolayer HfTe5\mathrm{HfTe}_{5} under (a) 0% (b) 1% and (c) 3% biaxial tensile strain. The band structures are colored according to orbital projections onto each layer with purple indicating wavefunctions primarily confined to ZrTe5\mathrm{ZrTe}_{5} and green indicating wavefunctions primarily confined to HfTe5\mathrm{HfTe}_{5}. Lighter colored and white areas have hybridized wavefunctions with contributions from orbitals that span both layers.

Band structures of heterobilayers under biaxial compressive strain

Figure S5. Band structures of heterobilayers of monolayer ZrTe5\mathrm{ZrTe}_{5} with monolayer HfTe5\mathrm{HfTe}_{5} under (a) 0% (b) 1% and (c) 3% biaxial compressive strain. The band structures are colored according to orbital projections onto each layer with purple indicating wavefunctions primarily confined to ZrTe5\mathrm{ZrTe}_{5} and green indicating wavefunctions primarily confined to HfTe5\mathrm{HfTe}_{5}. Lighter colored and white areas have hybridized wavefunctions with contributions from orbitals that span both layers.

References

  1. [1]R. Hadfield, Single-photon detectors for optical quantum information applications, Nature Photon 3, 696 (2009).DOI
  2. [2]Y. Kajihara, T. Nakajima, Z. Wang, and S. Komiyama, Terahertz single-photon detectors based on quantum wells, Journal of Applied Physics 113, 136506 (2013).DOI
  3. [3]K. Takemoto, Y. Nambu, T. Miyazawa, Y. Sakuma, T. Yamamoto, S. Yorozu, and Y. Arakawa, Quantum key distribution over 120km using ultrahigh purity single-photon source and superconducting single-photon detectors, Sci Rep 5, 10.1038/srep14383 (2015).DOI
  4. [4]G. Hong, A. L. Antaris, and H. Dai, Near-infrared fluorophores for biomedical imaging, Nat Biomed Eng 1, 10.1038/s41551-016-0010 (2017).DOI
  5. [5]P. M. Echternach, B. J. Pepper, T. Reck, and C. M. Bradford, Single photon detection of 1.5 THz radiation with the quantum capacitance detector, Nat Astron 2, 90 (2018).DOI
  6. [6]Y. Hochberg, Y. Kahn, M. Lisanti, K. M. Zurek, A. G. Grushin, R. Blan, S. M. Griffin, Z.-F. Liu, S. F. Weber, and J. B. Neaton, Detection of sub-MeV dark matter with three-dimensional Dirac materials, Phys. Rev. D 97, 015004 (2018).DOI
  7. [7]S. M. Griffin, K. Inzani, T. Trickle, Z. Zhang, and K. M. Zurek, Extended calculation of dark matter-electron scattering in crystal targets, Phys. Rev. D 104, 095015 (2021).DOI
  8. [8]M. G. Dastidar, I. Thekkooden, P. K. Nayak, and V. P. Bhallamudi, Quantum emitters and detectors based on 2D van der Waals materials, Nanoscale 14, 5289 (2022).DOI
  9. [9]R. Essig, M. Fernandez-Serra, J. Mardon, A. Soto, T. Volansky, and T.-T. Yu, Direct Detection of sub-GeV Dark Matter with Semiconductor Targets, J. High Energ. Phys. 05, 046 (2016).arxiv.org/abs/1509.01598
  10. [10]T. Emken, R. Essig, C. Kouvaris, and M. Sholapurkar, Direct Detection of Strongly Interacting Sub-GeV Dark Matter via Electron Recoils, Journal of Cosmology and Astroparticle Physics 070.DOI
  11. [11](2019).DOI
  12. [12]S. M. Griffin, K. Inzani, T. Trickle, Z. Zhang, and K. M. Zurek, Multichannel direct detection of light dark matter: Target comparison, Phys. Rev. D 101, 055004 (2020).DOI
  13. [13]R. M. Geilhufe, F. Kahlhoefer, and M. W. W. Dirac, Dirac materials for sub-MeV dark matter detection: New targets and improved formalism, Phys. Rev. D 101, 055005 (2020).
  14. [14]T. Trickle, Z. Zhang, K. M. Zurek, K. Inzani, and S. M. Griffin, Multi-channel direct detection of light dark matter: theoretical framework, J. High Energ. Phys. 2020, 036 (2020).DOI
  15. [15]Q. Arnaud et al. (EDELWEISS), First germanium-based constraints on sub-MeV Dark Matter with the EDELWEISS experiment, Phys. Rev. Lett. 125, 141301 (2020).DOI
  16. [16]A. Coskuner, A. Mitridate, A. Olivares, and K. M. Zurek, Directional dark matter detection in anisotropic Dirac materials, Phys. Rev. D 103, 016006 (2021).DOI
  17. [17]Y. Hochberg, Y. Kahn, N. Kurinsky, B. V. Lehmann, T. C. Yu, and K. K. Berggren, Determining Dark-Matter–Electron Scattering Rates from the Dielectric Function, Physical Review Letters 127, 151802 (2021).DOI
  18. [18]S. Knapen, J. Kozaczuk, and T. Lin, Dark matter-electron scattering in dielectrics, Phys. Rev. D 104, 015031 (2021).DOI
  19. [19]Y. Kahn and T. Lin, Searches for light dark matter using condensed matter systems, Rep. Prog. Phys. 85, 066901 (2022).DOI
  20. [20]Y. Gu, L. Wu, and B. Zhu, Detection of inelastic dark matter via electron recoils in SENSEI, Phys. Rev. D 106, 075004 (2022).DOI
  21. [21]Z. Y. Zhang, L. T. Yang, Q. Yue, K. J. Kang, Y. J. Li, M. Argirochi, H. P. An, J. P. Chang, Y. H. Chen, J. P. Cheng, W. H. Dai, Z. Deng, C. H. Fang, X. P. Geng, H. Gong, Q. J. Guo, X. Y. Guo, L. He, S. M. He, J. W. Hu, H. X. Huang, T. C. Huang, H. T. Jia, X. Jiang, H. B. Li, J. M. Li, J. Li, Q. Y. Li, R. M. J. Li, X. Q. Li, Y. L. Li, Y. F. Liang, B. Liao, F. K. Lin, S. T. Lin, S. K. Liu, Y. D. Liu, Y. Liu, Y. Y. Liu, Z. Z. Liu, H. Ma, Y. C. Mao, Q. Y. Nie, J. H. Ning, H. Pan, N. C. Qi, J. Ren, X. C. Ruan, K. Saraswat, V. Sharma, Z. She, M. K. Singh, T. X. Sun, C. J. Tang, W. Y. Tang, Y. Tian, G. F. Wang, L. Wang, Q. Wang, Y. Wang, Y. X. Wang, H. T. Wong, S. Y. Wu, Y. C. Wu, H. Y. Xing, R. Xu, Y. Xu, T. Xue, Y. L. Yan, C. H. Yeh, N. Yi, C. X. Yu, H. J. Yu, J. F. Yue, M. Zeng, Z. Zeng, B. T. Zhang, F. S. Zhang, L. Zhang, Z. H. Zhang, K. K. Zhao, M. G. Zhao, J. F. Zhou, Z. Y. Zhou, and J. J. Zhu (CDEX Collaboration), Constraints on Sub-GeV Dark Matter–Electron Scattering from the CDEX-10 Experiment, Phys. Rev. Lett. 129, 221301 (2022).DOI
  22. [22]T. Trickle, Extended calculation of electronic excitations for direct detection of dark matter, Phys. Rev. D 107, 035035 (2023).DOI
  23. [23]I. Arnquist et al. (DAMIC-M), First Constraints from DAMIC-M on Sub-GeV Dark-Matter Particles Interacting with Electrons, Phys. Rev. Lett. 130, 171003 (2023).DOI
  24. [24]V. Zema, P. Figueroa, G. Anglôher, M. R. Bharadwaj, T. Frank, M. N. Hughes, M. Kellermann, F. Pröbst, K. Schäffner, K. Shera, and M. Stahlberg, Dark matter-electron scattering search using cryogenic light detectors, Phys. Rev. D 110, 123012 (2024).DOI
  25. [25]R. Agnese et al. (SuperCDMS), First Dark Matter Constraints from a SuperCDMS Single-Charge Sensitive Detector, Phys. Rev. Lett. 121, 051301 (2018), [Erratum: Phys. Rev. Lett. 122, 069901 (2019)] O. Abramoff et al. (SENSEI), SENSEI: Direct-Detection Constraints on Sub-GeV Dark Matter from a Shallow Underground Run Using a Prototype Skipper-CCD, Phys. Rev. Lett. 122, 161801 (2019).
  26. [27]L. Barak et al. (SENSEI), SENSEI: Direct-Detection Results on sub-GeV Dark Matter from a New Skipper-CCD, Phys. Rev. Lett. 125, 171802 (2020).DOI
  27. [28]D. W. Amaral et al. (SuperCDMS), Constraints on low-mass, relic dark matter candidates from a surface-operated SuperCDMS single-charge sensitive detector, Phys. Rev. D 102, 091101 (2020).DOI
  28. [29]P. Abbamonte, A. Albert, D. S. M. Alves, J. Anczarski, T. Aralis, T. U. Böhm, C. Boyd, J. Chen, P.-H. Chu, M. S. Cook, C. W. Fink, M. L. Graesser, Y. Kahn, C. S. Kengle, T. Kucinski, N. A. Kurinsky, C. Lane, A. Leder, R. Massarczyk, A. Mazumdar, S. J. Meijer, W. Nie, E. A. Peterson, A. Phipps, F. Ronning, P. F. S. Rosa, I. Rydstrom, N. S. Sirica, Z. J. Smith, K. Stifter, S. M. Thomas, S. L. Watkins, B. A. Young, and J.-X. Zhu, SPLENDOR: a novel detector platform to search for light dark matter with narrow-gap semiconductors, arXiv e-prints (2025), arXiv:2507.17782 [physics.ins-det].arxiv.org/abs/2507.17782
  29. [30]J. Aalbers, D. S. Akerib, A. K. A. Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, J. W. Bargemann, E. E. Barillier, D. Bauer, K. Beattie, T. Benson, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer, C. A. J. Brew, P. Brás, S. Burdin, M. Buuck, M. C. Carmona-Benitez, M. Carter, A. Chawla, H. Chen, J. J. Cherwinka, Y. T. Chin, N. I. Chott, M. V. Converse, R. Coronel, A. Cottle, G. Cox, D. Curran, C. E. Dahl, I. Darlington, S. Dave, A. David, J. Delgaudio, S. Dey, L. de Viveiros, L. Di Felice, C. Ding, J. E. Y. Dobson, E. Druszkiewicz, S. Dubey, S. R. Eriksen, A. Fan, S. Fayer, N. M. Fearon, N. Fieldhouse, S. Fiorucci, H. Flaecher, E. D. Fraser, T. M. A. Fruth, R. J. Gaitskell, A. Gaffre, J. Genovesi, C. Ghag, A. Ghosh, R. Gibbons, S. Gokhale, J. Green, M. G. D. van der Grinten, J. J. Hairston, C. R. Hall, T. J. Hall, S. Han, E. Hartigan-O’Connor, S. J. Haselschwardt, M. A. Hernandez, S. A. Hertel, G. Heuermann, G. J. Homenides, M. Horn, D. Q. Huang, D. Hunt, E. Jacquet, R. S. James, J. Johnson, A. C. Kaboth, A. C. Kamaha, M. K. K., D. Khaitan, A. Khazov, I. Khurana, J. Kim, Y. D. Kim, J. Kingston, R. Kirk, D. Kodroff, L. Korley, E. V. Korolkova, H. Kraus, S. Kravitz, L. Kreczko, V. A. Kudryavtsev, C. Lawes, D. S. Leonard, K. T. Lesko, C. Levy, J. Lin, A. Lindote, W. H. Lippincott, M. I. Lopes, W. Lorenzon, C. Lu, S. Luitz, P. A. Majewski, A. Manalaysay, R. L. Mannino, C. Maupin, M. E. McCarthy, G. McDowell, N. McKinsey, J. McLaughlin, J. B. McLaughlin, R. McMonigle, E. Mizrachi, A. Monte, M. E. Monzani, J. D. M. Mendoza, E. Morrison, B. J. Mount, M. Murdy, A. S. J. Murphy, A. Naylor, H. N. Nelson, F. Neves, A. Nguyen, C. L. O’Brien, I. Olcina, K. C. Oliver-Mallory, J. Orpwood, K. Y. Oulmalz, K. J. Palladino, J. Palmer, N. J. Pannifer, N. Parveen, S. J. Patton, B. Penning, G. Pereira, E. Perry, T. Pershing, A. Piepke, Y. Qie, J. Reichenbacher, C. A. Rhyne, A. Richards, Q. Riffard, G. R. C. Rischbieter, E. Ritchey, H. S. Riyat, R. Rosero, T. Rushton, D. Rynders, D. Santone, A. B. M. R. Sazzad, R. W. Schnee, G. Sehr, B. Shafer, S. Shaw, T. Shutt, J. J. Silk, C. Silva, G. Sinev, J. Siniscalco, R. Smith, V. N. Solovov, P. Sorensen, J. Soria, I. Stancu, A. Stevens, K. Stifter, B. Suerfu, T. J. Sumner, M. Szydagis, D. R. Tiedt, M. Timalsina, Z. Tong, D. R. Tovey, J. Tranter, M. Trask, M. Tripathi, A. Usón, A. Vacheret, A. C. Vaitkus, O. Valentino, V. Velan, A. Wang, J. J. Wang, Y. Wang, J. R. Watson, L. Weedlreyer, T. J. Whitish, K. Wild, M. Williams, W. J. Wisniewski, L. Wolf, F. L. H. Wolfs, S. Woodford, D. Woodward, C. J. Wright, Q. Xia, J. Xu, Y. Xu, M. Yeh, D. Yeum, W. Zha, and E. A. Zweig (LZ Collaboration), Dark Matter Search Results from 4.2 Tonne–Years of Exposure of the LUX-ZEPLIN (LZ) Experiment, Phys. Rev. Lett. 135, 011802 (2025).
  30. [31]A. Sood, J. B. Haber, J. Carlström, E. A. Peterson, E. Barre, J. D. Georgaras, A. H. M. Reid, X. Shen, M. E. Zajac, E. C. Regan, J. Yang, T. Taniguchi, K. Watanabe, F. Wang, X. Wang, J. B. Neaton, T. F. Heinz, A. M. Lindenberg, F. H. da Jornada, and A. Raja, Bidirectional phonon emission in two-dimensional heterostructures triggered by ultrafast charge transfer, Nat Nanotechnol 18, 29 (2023).DOI
  31. [32]Z. Fan, Q.-F. Liang, Y. B. Chen, S.-H. Yao, and J. Zhou, Transition between strong and weak topological insulator in ZrTe5 and HfTe5, Scientific Reports 7, 10.1038/srep45667 (2017).DOI
  32. [33]Y. Zhang, C. Wang, L. Yu, G. Liu, L. Aiji, J. Huang, S. Nie, X. Sun, Y. Zhang, B. Shen, J. Liu, H. Weng, L. Zhao, G. Chen, X. Jia, C. Hu, Y. Ding, W. Zhao, Q. Gao, C. Li, S. He, L. Zhao, F. Zhang, S. Zhang, F. Yang, Z. Wang, Q. Peng, X. Dai, Z. Fang, Z. Xu, C. Chen, and X. J. Zhou, Electronic evidence of temperature-induced Lifshitz transition and topological nature in ZrTe5, Nature Communications 8, 10.1038/ncomms15512 (2017).DOI
  33. [34]J. Mutch, W.-C. Chen, P. Went, T. Qian, I. Z. Wilson, A. Andreev, C.-C. Chen, and J.-H. Chu, Evidence for a strain-tuned topological phase transition in ZrTe5, Science Advances 5, eaav9771 (2019), https://www.science.org/doi/pdf/10.1126/sciadv.aav9771.DOI
  34. [35]Z. Tajkov, D. Nagy, K. Kandrai, J. Koltai, L. Oroszlány, P. Süle, Z. E. Horváth, P. Vancsó, L. Tapasztó, and P. Nemes-Incze, Revealing the topological phase diagram of ZrTe5 using the complex strain fields of microbubbles, npj Computation Materials 8, 10.1038/s41524-022-00854-z (2022).DOI
  35. [36]J. Liu, Y. Zhou, S. Y. Rodrigues, M. A. Delmont, R. A. Welser, T. Ho, N. Sirica, K. McClure, P. Vilmercati, J. W. Ziller, N. Mannella, J. D. Sanchez-Yamagishi, M. T. Pettes, R. Wu, and L. A. Jauregui, Controllable strain-driven topological phase transition and dominant surface-state transport in HfTe5, Nature Communications 15, 10.1038/s41467-023-44547-7 (2024).DOI
  36. [37]N. H. Jo, O. A. Ashour, Z. Shu, C. Jozwiak, A. Bostwick, Y. Wang, E. Downey, S. H. Ryu, K. Sun, T. Kong, S. M. Griffin, and E. Retenberg, Effects of strain and defects on the topological properties of HfTe5, Phys. Rev. B 109, 235122 (2024).
  37. [38]E. A. Peterson, C. Lane, and J.-X. Zhu, Te Vacancy-Driven Anomalous Transport in ZrTe5 and HfTe5, Advanced Physics Research 4, 2300111 (2025).DOI
  38. [39]G. Kresse and D. Joubert, From ultrasoft pseudopotentials to the projector augmented-wave method, Phys. Rev. B 59, 1758 (1999).DOI
  39. [40]G. Kresse and J. Furthmüller, Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set, Computational Materials Science 6, 15 (1996).DOI
  40. [41]G. Kresse and J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 54, 11169 (1996).pubmed.ncbi.nlm.nih.gov/9984901
  41. [42]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized Gradient Approximation Made Simple, Phys. Rev. Lett. 77, 3865 (1996).pubmed.ncbi.nlm.nih.gov/10062328
  42. [43]S. Grimme, J. Antony, S. Ehrlich, and H. Krieg, A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements, H-Pu, The Journal of Chemical Physics 132, 154104 (2010), https://pubs.aip.org/aip/jcp/article-pdf/doi/10.1063/1.3382344/15684000/154104_1_online.pdf.DOI
  43. [44]H. Fjellvåg and A. Kjekshus, Structural properties of ZrTe5 and HfTe5 as seen by powder diffraction, Solid State Communications 60, 91 (1986).DOI
  44. [45]P. Shahi, D. J. Singh, J. P. Sun, L. X. Zhao, G. F. Chen, Y. Y. Lv, J. Li, J.-Q. Yan, D. G. Mandrus, and J.-G. Cheng, Bipolar Conduction as the Possible Origin of the Electronic Transition in Pentatellurides: Metallic vs Semiconducting Behavior, Phys. Rev. X 8, 021055 (2018).DOI
  45. [46]B. Monserrat and A. Narayan, Unraveling the topology of ZrTe5 by changing temperature, Physical Review Research 1, 033181 (2019).DOI
  46. [47]K. F. Mak, C. Lee, J. Hone, J. Shan, and T. F. Heinz, Atomically Thin MoS2: A New Direct-Gap Semiconductor, Phys. Rev. Lett. 105, 136805 (2010).DOI
  47. [48]A. N. Rudenko and M. I. Katsnelson, Quasiparticle band structure and tight-binding model for single- and bilayer black phosphorus, Phys. Rev. B 89, 201408 (2014).DOI
  48. [49]H.-C. Kim, H. Kim, J.-U. Lee, H.-B. Lee, D.-H. Choi, J.-H. Lee, W. H. Lee, S. H. Jhang, B. H. Park, H. Cheong, S.-W. Lee, and H.-J. Chung, Engineering Optical and Electronic Properties of WS2 by Varying the Number of Layers, ACS Nano 9, 6854 (2015), https://doi.org/10.1021/acsnano.5b01727.
  49. [50]J. Gusakova, X. Wang, L. L. Shiau, A. Krivosheeva, V. Shaposhnikov, V. Borisenko, V. Gusakov, and B. K. Tay, Electronic Properties of Bulk and Monolayer TMDs: Theoretical Study Within DFT Framework (GVJ-2e Method), Physica Status Solidi A 214, 10.1002/pssa.201700218 (2017).DOI

Paper details

vlnc:W_a2p79nzw
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents