betaFeedback

WorksPhysics and Astronomy

Crystal Growth of the Quasi-2D Quarternary Compound AgCrP2_2S6_6 by Chemical Vapor Transport

Abstract

We report optimized crystal growth conditions for the quarternary compound AgCrP2_2S6_6 by chemical vapor transport. Compositional and structural characterization of the obtained crystals were carried out by means of energy-dispersive X-ray spectroscopy and powder X-ray diffraction. AgCrP2_2S6_6 is structurally closely related to the M2M_2P2_2S6_6 family, which contains several compounds that are under investigation as 2D magnets. As-grown crystals exhibit a plate-like, layered morphology as well as a hexagonal habitus. AgCrP2_2S6_6 crystallizes in monoclinic symmetry in the space group P2/aP2/a (No. 13). The successful growth of large high-quality single crystals paves the way for further investigations of low dimensional magnetism and its anisotropies in the future and may further allow for the manufacturing of few-layer (or even monolayer) samples by exfoliation.

Introduction

Among the magnetic quasi-two-dimensional materials that have recently moved in the focus of (quasi-)two-dimensional (2D) materials research [1, 2, 3], the M2P2S6M_2P_2S_6 class of layered materials offers a plenitude of isostructural compounds with different magnetic properties depending on MM [4, 5]. Thus, M2P2S6M_2P_2S_6 allows to investigate fundamental aspects of low dimensional magnetism and several members may be promising for future applications, e.g., complementing non-magnetic (quasi-)2D materials in heterostructures or in spintronic devices [6, 7].

Regarding the crystal structure, the M2P2S6M_2P_2S_6 family consists of van der Waals layered compounds which share a honeycomb network of M2+M^{2+} and, most prominently, a dominantly covalent [P2S6]4−[P_2S_6]^{4-} anion located in the voids of the honeycomb [4, 5]. In the bulk, such layers are stacked on top of each other only interacting via weak van der Waals forces. Consequently, these compounds can be easily exfoliated potentially down to a single layer [8, 9].

Several isovalent substitution series of M2+M^{2+} by another M′2+M'^{2+} (e.g., (Mn1−xFex)2P2S6(\mathrm{Mn}_{1-x}\mathrm{Fe}_x)_2P_2S_6 [10], (Mn1−xNix)2P2S6(\mathrm{Mn}_{1-x}\mathrm{Ni}_x)_2P_2S_6 [11], (Fe1−xNix)2P2S6(\mathrm{Fe}_{1-x}\mathrm{Ni}_x)_2P_2S_6 [12, 13] and (Zn1−xNix)2P2S6(\mathrm{Zn}_{1-x}\mathrm{Ni}_x)_2P_2S_6 [4]) are reported to exhibit solid solution behavior and, thus, imply a random distribution of the substituents on the honeycomb network, as illustrated in Figure 1(a). Beyond isovalent substitution, Colombet et al. [14, 15, 16, 17] demonstrated that a substitution of M2+M^{2+} by M1+M3+M^{1+}M^{3+} also yields several stable compounds. In contrast to the isovalent substitution series however, M1+M^{1+} and M3+M^{3+} do not randomly occupy the MM positions in the lattice but order either in an alternating or in a zig-zag stripe-like arrangement on the honeycomb, as illustrated in Figure 1(b) and (c), respectively. The former arrangement is attributed to a minimization of repulsive Coloumb interactions (i.e., charge ordering). The latter is observed for compounds for which M1+M^{1+} and M′3+M'^{3+} have notably different sizes and, thus, is dominantly driven by a minimization of lattice distortion and steric effects [4, 14].

Schematic illustration of the different arrangements of $M$ and $M'$ on the honeycomb lattice

Figure 1. Schematic illustration of the different arrangements of MM and M′M' on the honeycomb lattice of M2P2S6M_2P_2S_6. (a) Random distribution for M2+M′2+P2S6M^{2+}M'^{2+}P_2S_6. (b) Alternating/triangular arrangement and (c) zig-zag stripe like arrangement for M1+M′3+P2S6M^{1+}M'^{3+}P_2S_6.

With M′3+M'^{3+} being a magnetic ion (e.g., V3+V^{3+} or Cr3+Cr^{3+}) and M1+M^{1+} being non-magnetic (e.g., Cu1+Cu^{1+} or Ag1+Ag^{1+}), the magnetic sublattices formed in M1+M′3+P2S6M^{1+}M'^{3+}P_2S_6 extend the magnetic structures of the usually magnetically hexagonal M2P2S6M_2P_2S_6 compounds by an alternating/triangular and a zig-zag stripe-like magnetic arrangement [4, 14, 16]. The stripe-like magnetic structure is especially notable, as each stripe of magnetic ions is well isolated from the adjacent magnetic stripes by a stripe of non-magnetic ions. Although the corresponding compound still has a (quasi-)2D layered crystal structure, the magnetic structure can be expected to exhibit 1D magnetic characteristics. Indeed, several indications for such low dimensional magnetism are reported for M1+M′3+P2S6M^{1+}M'^{3+}P_2S_6 with M=AgM = \mathrm{Ag} and M′=CrM' = \mathrm{Cr} [16, 18], making it an interesting compound for further studies.

However, until now only details on the synthesis of AgCrP2S6\mathrm{AgCrP_2S_6} via solid state synthesis are reported1 [16]. Although small crystals in the μm\mu\mathrm{m} scale could be obtained by solid state synthesis, which allowed for a structural solution based on single crystal X-ray diffraction, significantly larger crystals are needed for detailed investigations of the physical properties including anisotropies. Thus we have optimized the crystal growth conditions of AgCrP2S6\mathrm{AgCrP_2S_6} by the chemical vapor transport (CVT) technique, in a similar approach to the successful single crystal growth of most ternary M2P2S6M_2P_2S_6 compounds using this technique [13, 19]. Hereafter, the optimized conditions for the single crystal growth of the quarternary compound AgCrP2S6\mathrm{AgCrP_2S_6} are reported. Furthermore, a comprehensive compositional and structural characterization of the as-grown crystals is presented.

Materials & Methods

The elemental educts for the crystal growth of AgCrP2S6\mathrm{AgCrP_2S_6}, as listed in Tab. 1, were obtained from Alfa Aesar and kept in an argon filled glove box for storage and handling.

The crystals obtained from the CVT crystal growth experiments were thoroughly characterized by scanning electron microscopy (SEM) regarding their morphology and topography using a secondary electron (SE) detector and regarding chemical homogeneity via the chemical contrast obtained from a back scattered electron (BSE) detector. For this, a ZEISS EVO MA 10 scanning electron microscope was used. The chemical composition of

ChemicalSpecificationPurity
SilverPowder, APS 4–7 micron99.9%
ChromiumPowder, -100+325 mesh99.99%
Red phosphorusLumps99.999%
SulfurPieces99.999%
IodineResublimed crystals99.9985%

caption: Table 1: Elemental educts used for the CVT growth of AgCrP2_2S6_6.

:::

the crystals was investigated by energy dispersive X-ray spectroscopy (EDX), which was measured in the same SEM device with an accelerating voltage of 30 kV for the electron beam and using an energy dispersive X-ray analyzer.

The crystal structure of the obtained crystals was investigated by powder X-ray diffraction (pXRD), which was measured on a STOE STADI laboratory diffractometer in transmission geometry with Cu-Kα1\alpha_1 radiation from a curved Ge(111) single crystal monochromator and detected by a MYTHEN 1K 12.5°-linear position sensitive detector manufactured by DECTRIS. The pXRD patterns were initially analyzed by pattern matching using the HighScore Plus program suite [20]. After the crystallographic phase was identified, a structural refinement of the crystal structure model was performed based on our experimental patterns using the Rietveld method in Jana2006 [21].

Crystal Growth via Chemical Vapor Transport

All procedures for the preparation were performed under argon atmosphere in a glove box, the elemental educts silver, chromium, red phosphorus and sulfur were weighed out in a molar ratio of Ag : Cr : P : S = 1 : 1 : 2 : 6 and homogenized in an agate mortar. 0.5 g of reaction mixture were loaded in a quartz ampule (6 mm inner diameter, 2 mm wall thickness) together with approx. 50 mg of the transport agent iodine. Immediately prior to use, the ampule was cleaned by washing with distilled water, rinsing with isopropanol and, subsequently, baking out at 800 °C for at least 12 h in an electric tube furnace. This is done to avoid contamination of the reaction volume with (adsorbed) water. The filled ampule was then transferred to a vacuum pump and evacuated to a residual pressure of 10−810^{-8} bar. To suppress the unintended sublimation of the transport agent during evacuation, the end of the ampule containing the material was cooled with a small Dewar flask filled with liquid nitrogen. After reaching the desired internal pressure, the valve to the vacuum pump was closed, the cooling was stopped and the ampule was sealed under static pressure at a length of approximately 12 cm.

The ampule was carefully placed in a two-zone tube furnace in such a way that the reaction mixture was only at one side of the ampule which is referred to as the charge region. As illustrated in Figure 2(a), the furnace was initially heated homogeneously to 750 °C at 100 °C/h. The charge region was kept at this temperature for 274.5 h while the other side of the ampule, which is the sink region (see Figure 2(b)), was initially heated up to 800 °C at 100 °C/h, dwelled at this temperature for 24 h and then cooled to 750 °C at 1 °C/h. An inverse transport gradient is formed, i.e. transport from sink to charge, to clean the sink region of particles which stuck to the walls of the quartz ampule during the previous preparation steps. This ensures improved nucleation conditions in the following step. Then the sink region was cooled to 690 °C at 0.5 °C/h to gradually form the thermal transport gradient resulting in a controlled nucleation. With a final gradient of 750 °C (charge) to 690 °C (sink), the ampule was dwelled for 100 h. After this period of time, the charge region was cooled to the sink temperature in 1 h before both regions were furnace cooled (i.e., the heating elements were turned off) to room temperature.

Temperature profiles for CVT growth and schematic of an ampule, with as-grown AgCrP₂S₆ crystals

Figure 2. (a) Graphical illustrations of the temperature profile for the CVT growth of AgCrP2S6\mathrm{AgCrP}_{2}\mathrm{S}_{6} and (b) schematic drawing of an ampule during CVT. Arrows indicate the mass flow of the volatile transport species (top) and the flow of the released transport agent back to the charge (bottom). (c) and (d): As-grown crystals of AgCrP2S6\mathrm{AgCrP}_{2}\mathrm{S}_{6}. A orange square in the background corresponds to 1 mm×1 mm1\ \mathrm{mm} \times1\ \mathrm{mm} for scale.

Shiny plate-like crystals of AgCrP2S6\mathrm{AgCrP}_{2}\mathrm{S}_{6} in the size of approximately 2 mm×2 mm×100 μm2\ \mathrm{mm} \times2\ \mathrm{mm} \times100\ \mathrm{\mu m} were obtained. As example, as-grown single crystals are shown in Figure 2(c) and (d). These crystals exhibit a layered morphology and are easily exfoliated, which is typical for bulk crystals of (quasi-)22D materials. On the surface of some crystals, small spheres (likely solidified droplets) of a secondary phase were found. As this secondary phase has been formed purely on the surface, exfoliation of the crystal was suitable to remove this impurity phase.

Crystal Morphology & Compositional Analysis

The topographical SE image of an as grown AgCrP2S6\mathrm{AgCrP}_{2}\mathrm{S}_{6} crystal in Figure 3(a) exhibits a flat crystal surface and sharp edges. The terrace close to the upper edge of the crystal is a typical feature of layered systems. Also on the upper edge of the crystal, some steps can be seen, which form 120∘120^{\circ} angles, indicative of a hexagonal crystal habitus. The SE image with BSE detector in in Figure 3(b) shows an overall homogeneous contrast over the surface of the crystal demonstrating that it is chemically homogeneous. At some small areas, a change in contrast is observed. In comparison with the SEM image in SE mode, these spots can be clearly attributed to impurity particles on top of the crystal and not to any region of intergrowth with a secondary phase.

SEM image of an as-grown AgCrP2S6 crystal with topographical contrast in (a) and chemical contrast in (b)

Figure 3. SEM image of an as-grown AgCrP2S6 crystal with topographical contrast (SE mode) in (a) and chemical contrast (BSE mode) in (b).

By EDX measurements on multiple spots on several crystals, the mean elemental composition of the crystals was obtained as Ag1.03(2)Cr1.06(2)P2.03(2)S5.88(1)\mathrm{Ag}_{1.03(2)}\mathrm{Cr}_{1.06(2)}\mathrm{P}_{2.03(2)}\mathrm{S}_{5.88(1)}. This composition is in ideal agreement with the expected composition of AgCrP2S6\mathrm{AgCrP}_{2}\mathrm{S}_{6} and the small standard deviations (given in parentheses) indicate a homogeneous elemental distribution and composition.

Structural Analysis

The pXRD pattern obtained from AgCrP2S6 crystals, as shown in Figure 4(a), was indexed in the space group P2/aP2/a (No. 13), in agreement with literature [16]. No additional reflection were observed demonstrating the phase purity of our crystals.

pXRD patterns of powdered AgCrP2S6 crystals

Figure 4. (a) pXRD pattern from powdered AgCrP2S6 crystals compared to the calculated pattern based on the refined crystal structure model. (b) Zoomed-in view on the low angle 2θ2\theta regime (1010–40∘40^\circ). The marked reflections are expected to be systematically absent assuming a space group of C2/mC2/m instead of P2/aP2/a.

The C2/mC2/m space group, which is typically observed for compounds of the M2P2S6M_2P_2S_6 family [19, 22], including M2+M′2+P2S6M^{2+}M'^{2+}P_2S_6 compounds of isovalent substitution series (e.g., MnFeP2S6 [10], MnNiP2S6 [11] and FeNiP2S6 [13]), can be ruled out. Assuming a monoclinic unit cell, several observed reflections correspond to Laue indices that are systematically absent for C centering, as they violate the reflection condition hklhkl: h+k=2nh+k=2n. Examples are the reflections at 2θ=22.94∘2\theta=22.94^\circ corresponding to 120 and at 2θ=31.92∘2\theta=31.92^\circ corresponding to 211, as shown in Figure 4(b).

This implies that Ag and Cr indeed arrange as zig-zag stripes in AgCrP2S6 and do not just randomly occupy the corners of the structural honeycomb network, as it is the case for isovalent substitutions. While the former scenario breaks the mirror symmetry of the C2/mC2/m space group of the Fe2P2S6 aristotype [23], which results in a P2/aP2/a space group, the latter scenario would not. Also a C2/cC2/c space group, as reported, e.g., for CuCrP2S6 [14] with a triangular arrangement of the two transition element cations, can be ruled out based on the same considerations.

Starting from the crystal structure model proposed by Colombet et al. [16], a refined crystal structure model is obtained using the Rietveld method which is sufficient to describe our experimental pattern with good agreement, as shown in Figure 4(a). The obtained lattice parameter and reliability factors are summarized in Table 2 (top) and the refined structural model is given in the same table on the bottom and is illustrated in Figure 5. The strongest disagreement between model and experiment is observed for the high intensity 001 reflection at 2θ=13.67∘2\theta= 13.67^{\circ}. As this reflection corresponds to the stacking of layers, it is most prominently affected by any kind of disorder or defects influencing the stacking. Due to the weak structural interaction between layers, which are only based on weak van der Waals forces, the M2P2S6\mathrm{M}_2\mathrm{P}_2\mathrm{S}_6 compounds are prone to stacking faults and twinning between layers. In the presence of such defects, the shape of the corresponding 001 reflection is altered, which may be a reason for the observed deviation between the experiment and the model without defects.

Refined crystal structure model of AgCrP2S6 shown along the a, b, and c axes

Figure 5. Refined crystal structure model of AgCrP2S6\mathrm{AgCrP}_2\mathrm{S}_6 after Rietveld refinement. View along aa in (a), along bb in (b) and along c∗c^{*} in (c). The CrS6\mathrm{CrS}_6 and AgS6\mathrm{AgS}_6 coordination environments are shown in the color of the respective central atom.

Experiment
Temperature (K)293(2)
RadiationCu-Kα1_{\alpha1}
Wavelength (Å)1.54059
θmin⁡\theta_{\min} (°)10.00
θstep\theta_{\mathrm{step}} (°)0.03
θmax⁡\theta_{\max} (°)120.13
Crystal Data
Crystal Systemmonoclinic
Space GroupP2/aP2/a
aa (Å)5.8832(1)
bb (Å)10.6214(2)
cc (Å)6.7450(3)
β\beta (°)106.043(2)
Refinement
Goodness-Of-Fit2.13
RPR_{\mathrm{P}} (%)2.08
wRPwR_{\mathrm{P}} (%)3.11
RFR_{\mathrm{F}} (%)5.45
LabelTypeWyckxxyyzzUisoU_{\mathrm{iso}} (×10−3\times10^{-3} Å2^2)
Ag1Ag2e0.750.4364(2)034(1)
Cr1Cr2e0.250.9229(4)020(2)
P1P4g0.2979(6)0.2466(4)0.1659(6)2(1)
S1S4g0.9792(7)0.2309(5)0.2336(8)18(2)
S2S4g0.9880(5)0.9233(4)0.2165(8)7(1)
S3S4g0.4777(7)0.3947(4)0.2802(7)34(1)

Table 2. Top: Summary of experimental parameters of the pXRD experiment on AgCrP2S6\mathrm{AgCrP_2S_6}, extracted lattice parameters and reliability factors of the structural model obtained by the Rietveld method. Bottom: Refined crystal structure model of AgCrP2S6\mathrm{AgCrP_2S_6} and isotropic displacement parameters with standard deviations given in parentheses. All sites were treated as fully occupied.

Additionally, the experimental pattern exhibits significantly altered reflection intensities compared to an initial model, which are attributed to a strongly preferred orientation of the crystallites in the investigated sample. Due to the layered structure with only weak van der Waals interactions between layers, the powder particles obtained from grinding AgCrP2S6\mathrm{AgCrP}_2\mathrm{S}_6 crystals are plate-like and tend to lie flat on the sample holder. Thus, reflections with a dominant ll component (e.g., 001) exhibit higher intensities than expected for spherical crystallites in transmission geometry. To adjust for this effect in the model, the method proposed by March [24] and extended by Dollase [25] was used. However, the preferred orientation in AgCrP2S6\mathrm{AgCrP}_2\mathrm{S}_6 is strongly pronounced, such that it might be beyond the limit of what the semi-empirical March-Dollase model is capable of describing accurately. This may furthermore contribute to the deviation between model and experiment around the 001 reflection.

The refined crystal structure model for AgCrP2_2S6_6 shows that the Ag–S bonds are notably longer than the Cr–S bonds, as expected based on the difference between the size of the transition element cations (e.g., ionic radii for octahedral coordination: r(Ag1+)=1.15r(\mathrm{Ag}^{1+}) = 1.15 Å and r(Cr3+)=0.62r(\mathrm{Cr}^{3+}) = 0.62 Å [26]). These different bond lengths result in a distortion of the structure compared to the aristotype Fe2_2P2_2S6_6, which can be clearly observed, e.g., in Figure 5(a). In detail, the CrS6_6 coordination environment remains antiprismatic (i.e., close to octahedral with a slight trigonal elongation along c∗c^*) with the faces above and below the shared plane of the transition elements being parallel to each other. However, the AgS6_6 coordination environment as well as for the P2_2S6_6 environment are distorted in such a way that the faces above and below the transition element plane are not parallel to each other. In the view along the c∗c^* direction in Figure 5(c), this distortion manifests in Ag and P2_2 being shifted off-center in their respective sulfur coordination environments away from the closest Cr positions. Meanwhile, Cr is located exactly in the center of the CrS6_6 unit. The observation that the CrS6_6 unit is closer to an ideal octahedral coordination environment than the AgS6_6 unit can be understood considering the local charge density (i.e., ionic size and charge). Cr3+^{3+} is small and highly charged and, thus, interacts with the surrounding S atoms stronger than the comparable large and less charged Ag1+^{1+}. Another notable structural aspect is the strong distortion of the [P2_2S6_6]4−^{4-} units that demonstrates how flexible this covalent complex anion is. This complex anion is a common and characteristic building unit in the M2_2P2_2S6_6 family and its flexibility may indicate that several more compounds of the general formula M1+^{1+}M′3+^{3+}P2_2S6_6 are stable but have not been synthesized yet.

Summary & Conclusions

We report optimized crystal growth conditions for the quarternary compound AgCrP2_2S6_6 via Chemical Vapor Transport (CVT). A temperature profile adapted from the CVT growth of ternary M2_2P2_2S6_6 compounds is sufficient to yield crystals of the target AgCrP2_2S6_6 phase in the mm-size. On some crystals, traces of a superficial impurity phase is found which could be readily removed by exfoliation.

The as-grown crystals exhibit a plate-like, layered morphology as well as a hexagonal habitus and have the expected composition of AgCrP2_2S6_6 based on EDX spectroscopy. The pXRD pattern is indexed in the space group P21_1/a in agreement with literature [16]. The P21_1/a space group, on which the zig-zag type arrangement of MM and M′M' is based, can be well distinguished from, e.g., the C2/m and C2/c space groups due to reflections that are systematically absent for C centering. Starting from the model of Colom­bet et al. [16], a refined structural model is obtained using the Rietveld method. This model contains a notable distortion of the AgS6_6 and P2_2S6_6 coordination environments, while the CrS6_6 units remain antiprismatic with a slight trigonal distortion.

The zig-zag stripe-like arrangement in AgCrP2_2S6_6 and the alternating arrangement of MM and M′M', which is reported, e.g., for CuCrP2_2S6_6, are promising to yield interesting magnetic and electronic structures. While only few such quaternary phosphorus sulfide compounds have been synthesized until now, many more combinations of a 1+-ion and a 3+-ion can be expected to form analogous compounds. Furthermore, the fundamental idea of replacing MX+M^{X+} by M_{0.5}^{(X-1)+}M'_{0.5}^{(X+1)+} may be adaptable to the closely related structures such as, M23+_2^{3+}(Si,Ge)2_2Te6_6 compounds.

The single crystals of AgCrP2_2S6_6 that were obtained using the presented growth conditions allow for studies of the low dimensional magnetic interactions including the magnetic anisotropy of this compound in the future, which may lead to a better fundamental understanding of low dimensional magnetism. Furthermore, the van der Waals layered structure makes exfoliation easily possible and, thus, our successful growth of single crystals paves the way for further manufacturing of few-layer or even monolayer samples of AgCrP2_2S6_6.

Funding: This work is supported by the Deutsche Forschungsgemeinschaft (DFG) via Grant No. DFG A.S 523\4 1. S.S. acknowledges financial support from GRK-1621 graduate academy of the DFG. B.B. acknowledges financial support from the DFG through SFB 1143 (project-id 247310070). Y.S acknowledge the support of BMBF through UKRATOP (BMBF). S.A., B.B. and S.S. thank DFG for financial support in the frame of the joint DFG-RSF project-id 405940956.

Data Availability Statement: The refined crystal structure model and the powder X-ray diffraction dataset of AgCrP2_2S6_6 presented in this study are openly available in the Crystallography Open Database (COD), COD ID: 3000295 under https://www.crystallography.net/cod/3000295.html.

Conflicts of Interest: The authors declare no conflict of interest.

Sample Availability: Single crystals of AgCrP2_2S6_6 are available from the corresponding author.

Abbreviations

The following abbreviations are used in this manuscript:

2D Two-dimensional

CVT Chemical vapor transport

SEM Scanning electron microscopy

SE Secondary electron

BSE Back-scattered electron

EDX Energy dispersive X-ray spectroscopy

pXRD Powder X-ray diffraction

References

  1. [1]2D magnetism gets hot. Nature Nanotechnology 2018, 13, 269–269. doi:10.1038/s41565-018-0128-9.DOI
  2. [2]Gibertini, M.; Koperski, M.; Morpurgo, A.F.; Novoselov, K.S. Magnetic 2D materials and heterostructures. Nature Nanotechnology 2019, 14, 408–419. doi:10.1038/s41565-019-0438-6.DOI
  3. [3]Samarth, N. Magnetism in flatland. Nature 2017, 546, 216–217. doi:10.1038/546216a.
  4. [4]Brec, R. Review on Structural and Chemical Properties of Transition Metal Phosphorus Trisulfides MP S3. In Intercalation in Layered Materials; Springer US, 1986; pp. 93–124. doi:10.1007/978-1-4757-5555-5_4.
  5. [5]Susner, M.A.; Chyasnavichyus, M.; McGuire, M.A.; Ganesh, P.; Maksymovych, P. Metal Thio- and Selenophosphates as Multifunctional van der Waals Layered Materials. Advanced Materials 2017, 29, 1602852. doi:10.1002/adma.201602852.DOI
  6. [6]Zhong, D.; Seyler, K.L.; Linpeng, X.; Cheng, R.; Sivadas, N.; Huang, B.; Schmidgall, E.; Taniguchi, T.; Watanabe, K.; McGuire, M.A.; Yao, W.; Xiao, D.; Fu, K.M.C.; Xu, X. Van der Waals engineering of ferromagnetic semiconductor heterostructures for spin and valleytronics. Science Advances 2017, 3, e1603113. doi:10.1126/sciadv.1603113.DOI
  7. [7]Song, T.; Tu, M.W.Y.; Carnahan, C.; Cai, X.; Taniguchi, T.; Watanabe, K.; McGuire, M.A.; Cobden, D.H.; Xiao, D.; Yao, W.; Xu, X. Voltage Control of a van der Waals Spin-Filter Magnetic Tunnel Junction. Nano Letters 2019, 19, 915–920. doi:10.1021/acs.nanolett.8b04160.DOI
  8. [8]Lee, J.U.; Lee, S.; Ryoo, J.H.; Kang, S.J.; Kim, T.Y.; Kim, P.; Park, C.H.; Park, J.G.; Cheong, H. Ising-Type Magnetic Ordering in Atomically Thin FePS$_3$. Nano Letters 2016, 16, 7433–7438. doi:10.1021/acs.nanolett.6b03052.DOI
  9. [9]Kim, K.; Lim, S.Y.; Lee, J.U.; Lee, S.; Kim, T.Y.; Park, K.; Jeon, G.S.; Park, C.H.; Park, J.G.; Cheong, H. Suppression of magnetic ordering in XXZ-type antiferromagnetic monolayer NiPS3. Nature Communications 2019, 10, 345. doi:10.1038/s41467-018-08284-6.DOI
  10. [10]Masubuchi, T.; Hoya, H.; Watanabe, T.; Takahashi, Y.; Ban, S.; Ohkubo, N.; Takase, K.; Takano, Y. Phase diagram, magnetic properties and specific heat of Mn$_{1−x}$Fe$_x$PS$_3$. Journal of Alloys and Compounds 2008, 460, 668–674. doi:10.1016/j.jallcom.2007.06.063.
  11. [11]Shemerliuk, Y.; Wolter, A.U.B.; Cao, G.; Zhou, Y.; Yang, Z.; Büchner, B.; Aswartham, S. Tuning magnetic and transport properties in (Mn$_{1−x}$Ni$_x$)$_2$P$_2$S$_6$ Single crystals. preprint 2021.DOI
  12. [12]Rao, R.R.; Raychaudhuri, A.K. Magnetic Studies of a Mixed Antiferromagnetic System Fe$_{1−x}$Ni$_x$PS$_3$. Journal of Physics and Chemistry of Solids 1992, 53, 577–583. doi:10.1016/0022-3697(92)90103-k.
  13. [13]Selter, S.; Shemerliuk, Y.; Sturza, M.I.; Wolter, A.U.B.; Büchner, B.; Aswartham, S. Crystal Growth and Anisotropic Magnetic Properties of Quasi-2D (Fe$_{1−x}$Ni$_x$)$_2$P$_2$S$_6$. [2104.00066].DOI
  14. [14]Colombet, P.; Leblanc, A.; Danot, M.; Rouxel, J. Structural aspects and magnetic properties of the lamellar compound Cu$_{0.50}$Cr$_{0.50}$PS$_3$. Journal of Solid State Chemistry 1982, 41, 174–184. doi:10.1016/0022-4596(82)90200-6.
  15. [15]Ouili, Z.; Leblanc, A.; Colombet, P. Crystal structure of a new lamellar compound:. Journal of Solid State Chemistry 1987, 66, 86–94. doi:10.1016/0022-4596(87)90223-4.DOI
  16. [16]Colombet, P.; Leblanc, A.; Danot, M.; Rouxel, J. Coordinance inhabituelle de l’argent dans un sulfure lamellaire a sous-reseau magnetique 1D: le compose Ag0.5 Cr0.5 P S3. Nouveau Journal de Chimie 1987, 7, 333–338.
  17. [17]Lee, S.; Colombet, P.; Ouvrard, G.; Brec, R. A new chain compound of vanadium (III): structure, metal ordering, and magnetic properties. Materials Research Bulletin 1986, 21, 917–928. doi:10.1016/0025-5408(86)90129-7.DOI
  18. [18]Mutka, H.; Payen, C.; Molinié, P. One-Dimensional Heisenberg Antiferromagnet with Spin S = 3/2. Experiments on AgCrP₂S₆. Europhysics Letters (EPL) 1993, 21, 623–628. doi:10.1209/0295-5075/21/5/020.
  19. [19]Taylor, B.E.; Steger, J.; Wold, A. Preparation and properties of some transition metal phosphorus trisulfide compounds. Journal of Solid State Chemistry 1973, 7, 461–467. doi:10.1016/0022-4596(73)90175-8.DOI
  20. [20]Degen, T.; Sadki, M.; Bron, E.; König, U.; Nénert, G. The HighScore suite. Powder Diffraction 2014, 29, S13–S18. doi:10.1017/s0885715614000840.DOI
  21. [21]Petříček, V.; Dušek, M.; Palatinus, L. Crystallographic Computing System JANA2006: General features. Zeitschrift für Kristallographie - Crystalline Materials 2014, 229, 345–352. doi:10.1515/zkri-2014-1737.DOI
  22. [22]Brec, R.; Ouvrard, G.; Louisy, A.; Rouxel, J. Proprietes Structurales de Phases MIIP$_3$X$_3$ (X = S, Se). Annales de Chimie 1980, 5, 499–512.
  23. [23]Klingen, W.; Eulenberger, G.; Hahn, H. Über Hexachalkogeno-hypodiphosphate vom Typ M$_2$P$_2$X$_6$. Die Naturwissenschaften 1970, 57, 88–88. doi:10.1007/bf00590690.
  24. [24]March, A. Mathematische Theorie der Regelung nach der Korngestalt bei affiner Deformation. Zeitschrift für Kristallographie - Crystalline Materials 1932, 81, 285. doi:10.1524/zkri.1932.81.1.285.DOI
  25. [25]Dollase, W.A. Correction of intensities for preferred orientation in powder diffractometry: application of the March model. Journal of Applied Crystallography 1986, 19, 267–272. doi:10.1107/s0021889886089458.DOI
  26. [26]Shannon, R.D. Revised Effective Ionic Radii and Systematic Studies of Interatomic Distances in Halides and Chalcogenides. Acta Crystallographica Section A 1976, 32, 751–767. doi:10.1107/s0567739476001551.DOI

Paper details

vlnc:W_a3dtrbqt
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents