betaFeedback

WorksPhysics and Astronomy

A quantitative variational phase field framework

Abstract

The finite solid-liquid interface width in phase field models results in non-equilibrium effects, including solute trapping. Prior phase field modeling has shown that this extra degree of freedom, when compared to sharp-interface models, results in solute trapping that is well captured when realistic parameters, such as interface width, are employed. However, increasing the interface width, which is desirable for computational reasons, leads to artificially enhanced trapping thus making it difficult to model departure from equilibrium quantitatively. In the present work, we develop a variational phase field model with independent kinetic equations for the solid and liquid phases. Separate kinetic equations for the phase concentrations obviate the assumption of point wise equality of diffusion potentials, as is done in previous works. Non-equilibrium effects such as solute trapping, drag and interface kinetics can be introduced in a controlled manner in the present model. In addition, the model parameters can be tuned to obtain ``experimentally-relevant" trapping while using significantly larger interface widths than prior efforts. A comparison with these other phase field models suggests that interface width of about three to twenty-five times larger than current best-in-class models can be employed depending upon the material system at hand leading to a speed-up by a factor of W(d+2)W^{(d+2)}, where WW and dd denote the interface width and spatial dimension, respectively. Finally the capacity to model non-equilibrium phenomena is demonstrated by simulating oscillatory instability leading to the formation of solute bands.

Introduction

Rapid solidification refers to the use of large cooling rates or undercoolings resulting in growth speeds of solid-liquid front typically of the order of a cm s−1\mathrm{cm\,s^{-1}} or larger. Rapid solidification processing encompasses a wide range of industrially-relevant manufacturing processes such as laser-induced surface melting [1], spray forming [2], welding [3] and glass formation [4] amongst others. With the recent surge in additive manufacturing processes, there has been a renewed interest in experimental [5, 6, 7], theoretical development and numerical modeling [8, 9, 10, 11, 12] of rapid solidification of metallic alloys.

Rapid solidification is characterized by the breakdown of the local interfacial equilibrium assumption. Owing to the high growth speeds, the solute atoms do not have enough time to diffuse through the characteristic solid-liquid interface width δ\delta which is of the order of inter-atomic spacing. As a result solute is incorporated in the growing solid phase at a concentration significantly different from that predicted by the phase diagram. This non-equilibrium or incomplete solute partitioning at the solid-liquid interface is referred to as “solute trapping.” Cognizance of solute trapping holds the key in understanding the growth morphology [13, 14], formation of secondary phases [6] and micro-segregation pattern of the resulting microstructure [7].

Many of the insights into the phenomenon of solute trapping have followed from analyses modeling the liquid-solid interface using either a sharp-interface [15, 16, 17, 18, 19] or a semi-sharp interface or continuum model [20, 21]. Typically, the sharp interface models employ a solution to the diffusion equation to describe the bulk phases which are subjected to external and interfacial conditions. The interfacial conditions are described by response functions, one each for the interfacial concentration and temperature [16, 22]. While most sharp-interface theories differ in the details of the interface response functions, most of them predict a velocity-dependent partition coefficient kvk_v, which increases monotonically from the equilibrium partition coefficient kek_e to 1 as velocity increases from zero and tends to infinity, and an interface temperature that varies with velocity. The continuum models go a step further to incorporate the variation of the chemical potential and diffusivity through the interface which leads to non-monotonic dependence of kvk_v on the velocity [22]. Free energy dissipated by solute diffusion through the interface during interface motion leads to solute drag [16, 21]. While the sharp-interface and continuum models provide a thermodynamically-consistent framework to study trapping, tracking the morphologically complex interface makes implementing such models in higher dimensions an arduous task.

Phase field models have enjoyed great success in simulating microstructure evolution in myriad problems in solidification [23, 24] and solid-state phase transformation [25, 26, 27]. Unlike the sharp-interface models, the efficacy of the phase field method lies in its treatment of the interface. An indicator variable ϕ\phi, known as the phase field is introduced to demarcate the regions of different phases, say, solid and liquid by assigning constant values (say ϕ=0,1\phi= 0, 1) in the bulk phases. The phase field varies smoothly between the bulk values in a thin transition region known as the diffuse interface width WW. While the indicator function circumvents the need for interface tracking, the diffuse interface thickness introduces an additional length scale in the formulation. WW can be treated as either (i) a physical entity δ\delta, in which case the value is typically of the order of Angstrom or a few nanometers, or (ii) a mere mathematical construct, such that WW can be enlarged by orders of magnitude than the physical solid-liquid interface thickness. The value of WW is restricted by the condition to resolve the smallest microstructural feature. Ascribing the latter notion to WW, microstructures of the order of few μm\mu\mathrm{m} can be simulated within reasonable times. However, the computation results are now dependent on WW and an additional step of assessing the WW dependence on results needs to be performed. This can be done numerically by performing convergence tests or analytically by the method of matched asymptotic analysis.

The finite interface width in phase field models introduces a number of non-equilibrium effects including solute trapping [28, 29]. Depending upon the solidification conditions the solute trapping might be physically realistic or an undesirable artifact. It is computationally beneficial to use as large an interface width as possible, while preserving the required physical behavior of the model. For low speed directional solidification, solute trapping is negligible and can be eliminated using a judicious choice of interpolation functions [29, 30] and incorporation of an “antitrapping current” [28, 31], the form of which is selected based on the thin-interface analysis to recover local equilibrium conditions. Since the antitrapping current does not contribute to the free energy dissipation such models are termed as non-variational models. So, while solute trapping can and does occur during rapid solidification, phase field models with large values of WW chosen for computational expedience will yield artificially enhanced trapping [32, 33].

Ahmad and co-workers [34] studied solute trapping in context of the Wheeler-Boettinger-McFadden (WBM) phase field model [35]. In the WBM model, the interface is can be interpreted as a mixture of solid and liquid with the same composition. Thus, a single variable cc tracks the solute concentration in both phases. Selecting WW of the order of 0.1 nm, the variation of the partition coefficient with velocity was found to be in good agreement with the sharp-interface continuous growth model (CGM). In addition, the interface temperature agrees well with CGM with partial solute drag. Trapping has also been studied for the Kim-Kim-Suzuki (KKS) phase field model [36]. Unlike the WBM model, the KKS phase field model treats the interface as a mixture of solid and liquid with distinct concentrations csc_s and clc_l respectively. However, the phase concentrations are mutually dependent via the constraint of equal diffusion potential at each spatial point. The imposition of pointwise equality of diffusion potential, however, does not preclude solute trapping and the far-field diffusion potentials in the solid and liquid exhibit a jump that was shown to be consistent with the high velocity asymptotics of the WBM model. Similar conclusions have been deduced by a number of studies employing different versions of the above models on different material systems [33, 37, 38, 39, 40, 41, 42]. A common feature of the above models is that the partition coefficient was found to be sensitive to the chosen interface width, diffusivity and free energy interpolation functions. The interpolation functions (say h(ϕ)h(\phi)), which connect bulk quantities through the interface, are usually constructed based on the restriction that h(0)=0h(0) = 0, h(1)=1h(1) = 1 and h′(ϕ=0,1)=0h'(\phi= 0, 1) = 0. Since the interpolation functions are not associated with any inherent length scale, WW is the only free parameter in the model to tailor partitioning. It is evident that additional degrees of freedom are needed if certain control over solute trapping and drag is to be introduced in the phase field models. Moreover, the choice of WW puts a severe limitation on the computation time, especially in higher dimensions. The recent advances have therefore focused on addressing the issue of introducing additional degrees of freedom such that interface thickness can be increased, while still maintaining experimentally/physically-relevant trapping.

A finite interface dissipation model was recently introduced by Steinbach et al. [43]. Similar to the KKS model, distinct phase concentrations are introduced. However, rather than assuming local equilibrium condition, separate kinetic equations for the phase concentrations csc_s and clc_l were derived and the rate of exchange of atoms across phases is determined by a kinetic parameter termed as the “interface permeability” which provides the necessary degree of freedom. The solute trapping in the model is controlled through a combination of values of the interface permeability and interface thickness. However, the model is not analytically tractable making it difficult to select appropriate model parameters. In addition, it is unclear whether the interface permeability can be tuned to additionally control solute drag or interface temperature. Pinomaa and Provatas [44] have extended the thin-interface asymptotics to map the dilute alloy model of Echebarria-Folch-Karma-Plapp (EFKP) [45] to the sharp-interface CGM. A desired solute partitioning is attained by tuning the “anti-trapping current.” A recent model by Ji et al. [46] controls the partitioning by introducing an additional free parameter in the diffusivity interpolation function to increase the diffusivity at the interface. For different choices of the interface width, this additional parameter can be selected to give rise to same trapping behaviour. Both the above models are valid for dilute alloys and one-sided diffusivity i.e. the diffusion in the solid phase is zero.

A new class of phase field models termed as “non-diagonal” have also been introduced independently by several authors [47, 48, 49, 50, 51, 52]. Diagonality refers to the fact that in the previous phase field models such as WBM and KKS, the temporal derivative of concentration and the phase field depends only on the functional derivative of the free energy with respect to concentration (driving force for diffusion) and phase field (driving force for phase transformation) respectively. In other words, the diffusion flux is proportional to driving force for diffusion and rate of interface motion is coupled to the driving force for phase transformation. The dissipative flux in the bulk and the interface is coupled in a single diffusion flux term. However, the “non-diagonal” models introduce a kinetic cross-coupling between solute diffusion and phase-transformation. This cross-coupling term introduces an additional degree of freedom such that the bulk diffusion and interfacial solute redistribution can be controlled independently. Furthermore, the dynamic cross-coupling restores thermodynamic consistency in phase field models with the cross-coupling terms naturally emerging in the kinetic equations of concentration and phase field respectively. The non-diagonal models have opened the possibility to model close-to-equilibrium solidification processes quantitatively by successfully eliminating all the undesirable interface kinetic effects in systems with finite diffusion in solid [52, 53, 54]. The full potential of non-diagonal models, however, have not been fully explored for non-equilibrium solidification problems. A recent phase field model has been proposed by Ohno and co-workers [52] where the kinetic cross-coupling terms and their forms naturally arise in the model derivation. However, the model is only applicable to a low speed solidification regime. A local equilibrium condition is imposed to relate the phase concentrations. In addition, there are no degrees of freedom to control non-equilibrium effects. With this motivation in mind, we develop a variational phase field model that guarantees a decrease in free energy with sufficient degrees of freedom to incorporate non-equilibrium effects relevant to rapid solidification processing in a controlled manner. A key feature of the present model is that the phase concentrations are treated as mutually independent rather than relating them via the local equilibrium condition. Separate kinetic equations with interfacial source terms are derived for the phase concentrations which can be tuned to control solute trapping and drag. Unlike the KKS model and its derivatives, separate kinetic equations alleviate the need for the iterative solution of non-linear system of equations to relate the phase concentrations which can be computationally time consuming depending upon the alloy model and complexity of the system (for instance multi-phase multi-component systems). A number of previous phase field models are shown to be special cases of this new formulation.

The article is organized as follows: the model framework derived from variational principles is presented in § 2. We perform a detailed asymptotic analysis to derive the expression for the diffusion potential jump. The equations are then specialized for a dilute alloy in Section III. It is shown in Section IV that a number of previous phase field models can be derived as special cases from the present model. Numerical results are presented in Section V providing insights on tailoring a desired level for solute trapping and drag. The model parameters can be tuned readily from available experimental datasets, atomistic simulations or sharp-interface theories to capture “correct” level of partitioning. The model is applied to Si–9 %As and Ni–5 %Cu and the efficacy of the model is demonstrated by numerical studies on the partition coefficient and interface temperature. A comparative study with the previously developed phase field model suggests that interface width can be enlarged by a factor of three to twenty-five times in the velocity regime of 0.01 m s−1^{-1} to 1 m s−1^{-1}. For a finite-difference algorithm on a uniform grid spacing this upscaling expedites the computation by a factor W(d+2)W^{(d+2)}, where, dd is the dimension. Preliminary results on an oscillatory instability leading to the formation of solute bands are also presented. Finally, the paper is concluded by a summary of the main findings in § 12.

Model

We consider a binary two-phase system (say, solid and liquid) such that the phase field variable ϕ\phi assumes a value of 1 in the solid and 0 in the liquid. The interface, where ϕ\phi varies smoothly between the bulk values is treated as a mixture of phases, each with a distinct composition csc_s and clc_l. The overall solute concentration is defined as

c=csg(ϕ)+cl{1−g(ϕ)},(1)c = c_s g(\phi) + c_l \{1-g(\phi)\}, \tag*{(1)}

where g(ϕ)g(\phi) is a smoothed step-function satisfying the constraints g(ϕ=0)=0g(\phi=0)=0, g(ϕ=1)=1g(\phi=1)=1 and g′(ϕ=0,1)=0g'(\phi=0,1)=0. The free energy functional is written as a contribution arising from the usual interfacial and bulk free energy density and taking in account the constraint Eq. (1) as

F‾=F+∫Vλ[c−{csg(ϕ)+cl(1−g(ϕ))}] dV,(2)\overline{\mathcal{F}} = \mathcal{F} + \int_V \lambda\left[c-\left\{c_sg(\phi)+c_l\left(1-g(\phi)\right)\right\}\right]\,\mathrm{d}V, \tag*{(2)}

where

F=∫V[Hfdw(ϕ)+σ2∣∇ϕ∣2+fs(cs)g(ϕ)+fl(cl){1−g(ϕ)}] dV.(3)\mathcal{F}=\int_V\left[Hf_{\mathrm{dw}}(\phi)+\frac{\sigma}{2}|\nabla\phi|^2+f_s(c_s)g(\phi)+f_l(c_l)\left\{1-g(\phi)\right\}\right]\,\mathrm{d}V. \tag*{(3)}

fdw(ϕ)f_{\mathrm{dw}}(\phi) is the double well potential with a quartic form ϕ2(1−ϕ)2\phi^2(1-\phi)^2 with minima at ϕ=0\phi=0 and 11. HH is the barrier height. σ\sigma is the gradient energy coefficient penalizing sharp gradients and imparting smoothness to the phase field profile. fs(cs)f_s(c_s) and fl(cl)f_l(c_l) are the bulk free densities of the solid and liquid respectively. λ\lambda is the Lagrange multiplier to ensure that constraint Eq. (1) is obeyed. To select suitable choices of the evolution equations of the field variables, we consider the temporal change of free energy functional as

dF‾dt=∫V[δF‾δcs∂cs∂t+δF‾δcl∂cl∂t+δF‾δϕ∂ϕ∂t+δF‾δc∂c∂t+δF‾δλ∂λ∂t]dV.(4)\frac{\mathrm{d}\overline{\mathcal{F}}}{\mathrm{d}t}=\int_V\left[\frac{\delta\overline{\mathcal{F}}}{\delta c_s}\frac{\partial c_s}{\partial t}+\frac{\delta\overline{\mathcal{F}}}{\delta c_l}\frac{\partial c_l}{\partial t}+\frac{\delta\overline{\mathcal{F}}}{\delta\phi}\frac{\partial\phi}{\partial t}+\frac{\delta\overline{\mathcal{F}}}{\delta c}\frac{\partial c}{\partial t}+\frac{\delta\overline{\mathcal{F}}}{\delta\lambda}\frac{\partial\lambda}{\partial t}\right]\mathrm{d}V. \tag*{(4)}

Introducing the individual variation with respect to csc_s, clc_l, ϕ\phi, cc and λ\lambda form Eqs. (2) and (3) we obtain

dF‾dt=∫V{[δFδcs−λg(ϕ)]∂cs∂t+[δFδcl−λ{1−g(ϕ)}]∂cl∂t+[δFδϕ−λ(cs−cl)g′(ϕ)]∂ϕ∂t+λ∂c∂t}dV.(5)\frac{\mathrm{d}\overline{\mathcal{F}}}{\mathrm{d}t}=\int_V\left\{\left[\frac{\delta\mathcal{F}}{\delta c_s}-\lambda g(\phi)\right]\frac{\partial c_s}{\partial t}+\left[\frac{\delta\mathcal{F}}{\delta c_l}-\lambda\{1-g(\phi)\}\right]\frac{\partial c_l}{\partial t}+\left[\frac{\delta\mathcal{F}}{\delta\phi}-\lambda(c_s-c_l)g'(\phi)\right]\frac{\partial\phi}{\partial t}+\lambda\frac{\partial c}{\partial t}\right\}\mathrm{d}V. \tag*{(5)}

The conservation of mass is captured through the solute concentration cc continuity equation as

∂c∂t=−∇⋅J.(6)\frac{\partial c}{\partial t}=-\nabla\cdot J. \tag*{(6)}

The net flux JJ is assumed to be a simple interpolation of the solid and liquid flux as

J=Jsg(ϕ)+Jl{1−g(ϕ)}.(7)J=J_sg(\phi)+J_l\{1-g(\phi)\}. \tag*{(7)}

The temporal evolution of variables csc_s and clc_l can be postulated by noting that these quantities need only be conserved in their respective bulk phases when c=csc=c_s as ϕ=1\phi=1 and c=clc=c_l as ϕ=0\phi=0. In the interfacial region, a source term is permitted. A possible choice can be written as

∂cs∂t=−∇⋅Js+Ss(cs,cl,ϕ)g′(ϕ)∂ϕ∂t,(8)\frac{\partial c_s}{\partial t}=-\nabla\cdot J_s+S_s(c_s,c_l,\phi)g'(\phi)\frac{\partial\phi}{\partial t}, \tag*{(8)}

and

∂cl∂t=−∇⋅Jl+Sl(cs,cl,ϕ)g′(ϕ)∂ϕ∂t.(9)\frac{\partial c_l}{\partial t}=-\nabla\cdot J_l+S_l(c_s,c_l,\phi)g'(\phi)\frac{\partial\phi}{\partial t}. \tag*{(9)}

The source terms in Eqs. (8) and (9) are proportional to ∂ϕ∂t\frac{\partial\phi}{\partial t} to take into account that the solute redistribution is dependent on the interface velocity. The functions SsS_s and SlS_l in the source terms introduce a degree of freedom, which in principle can be tailored to map the phase field model onto a desired set of sharp-interface relations. We will see later that the source functions SsS_s and SlS_l contribute to the free energy dissipation. However, the free energy dissipation does not depend explicitly on the forms or the sign of the source functions. The exact form of the interfacial source terms SsS_s and SlS_l will be deduced later based on the asymptotic analysis of the model. Substituting Eqs. (6), (7), (8) and (9) in Eq. (5), applying the divergence theorem and neglecting the surface integrals, we have

References

  1. [1]X. Cui, S. Zhang, C. Zhang, J. Chen, J. Zhang, and S. Dong, Additive manufacturing of 24CrNiMo low alloy steel by selective laser melting: Influence of volumetric energy density on densification, microstructure and hardness, Materials Science and Engineering: A 809, 140957 (2021).DOI
  2. [2]W. Wolf, L. P. M. E. Silva, G. Zepon, C. S. Kiminami, C. Bolfarini, and W. J. Botta, Single step fabrication by spray forming of large volume Al-based composites reinforced with quasicrystals, Scripta Materialia 181, 86 (2020).DOI
  3. [3]J. Oliveira, T. Santos, and R. Miranda, Revisiting fundamental welding concepts to improve additive manufacturing: from theory to practice, Progress in Materials Science 107, 100590 (2020).DOI
  4. [4]R. Kobold, W. Kuang, H. Wang, W. Hornfeck, M. Kolbe, and D. M. Herlach, Dendrite growth velocity in the undercooled melt of glass forming Ni50Zr50 compound, Philosophical Magazine Letters 97, 249 (2017).DOI
  5. [5]S. Ghosh, L. Ma, L. E. Levine, R. E. Ricker, M. R. Stoudt, J. C. Heigel, and J. E. Guyer, Single-track melt-pool measurements and microstructures in Inconel 625, JOM 70, 1011 (2018).DOI
  6. [6]M. Chen, Q. Du, H. Fu, X. He, Z. Huang, R. Shi, and J. Xie, The formation of secondary phase in sub-rapid solidification process of Al–Mg–Si alloys, Materialia 15, 101022 (2021).DOI
  7. [7]P. D. Enrique, A. Keshavarzker​​mani, and N. Y. Zhou, Effect of microsegregation on high-temperature microstructure evolution in rapid solidification processed Nb-rich Ni superalloys, Advanced Engineering Materials 23, 2001396 (2021).DOI
  8. [8]T. Keller, G. Lindwall, S. Ghosh, L. Ma, B. M. Lane, F. Zhang, U. R. Kattner, E. A. Lass, J. C. Heigel, Y. Idell, et al., Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys, Acta Materialia 139, 244 (2017).DOI
  9. [9]S. Ghosh, L. Ma, N. Ofori-Opoku, and J. E. Guyer, On the primary spacing and microseg- regation of cellular dendrites in laser deposited Ni–Nb alloys, Modelling and Simulation in Materials Science and Engineering 25, 065002 (2017).
  10. [10]K. Karayagiz, L. Johnson, R. Seede, V. Attari, B. Zhang, X. Huang, S. Ghosh, T. Duong, I. Karaman, A. Elwany, et al., Finite interface dissipation phase field modeling of Ni–Nb under additive manufacturing conditions, Acta Materialia 185, 320 (2020).DOI
  11. [11]A. F. Chadwick and P. W. Voorhees, The development of grain structure during additive manufacturing, Acta Materialia 211, 116862 (2021).DOI
  12. [12]X. Wang, P. Liu, Y. Ji, Y. Liu, M. Horstemeyer, and L. Chen, Investigation on microsegregation of IN718 alloy during additive manufacturing via integrated phase-field and finite-element modeling, Journal of Materials Engineering and Performance 28, 657 (2019).DOI
  13. [13]W. Kurz and R. Trivedi, Rapid solidification processing and microstructure formation, Materials Science and Engineering: A 179, 46 (1994).DOI
  14. [14]G. Merchant and S. Davis, Morphological instability in rapid directional solidification, Acta Metallurgica et Materialia 38, 2683 (1990).DOI
  15. [15]M. J. Aziz, Model for solute redistribution during rapid solidification, Journal of Applied Physics 53, 1158 (1982).DOI
  16. [16]M. J. Aziz and T. Kaplan, Continuous growth model for interface motion during alloy solidification, Acta Metallurgica 36, 2335 (1988).DOI
  17. [17]M. J. Aziz and W. Boettinger, On the transition from short-range diffusion-limited to collision-limited growth in alloy solidification, Acta Metallurgica et Materialia 42, 527 (1994).DOI
  18. [18]J. Ågren, A simplified treatment of the transition from diffusion controlled to diffusion-less growth, Acta Metallurgica 37, 181 (1989).DOI
  19. [19]K. A. Jackson, K. M. Beatty, and K. A. Gudgel, An analytical model for non-equilibrium segregation during crystallization, Journal of Crystal Growth 271, 481 (2004).DOI
  20. [20]J. Baker and J. Cahn, Solidification, American Society for Metals, Metals Park, OH 23 (1971).
  21. [21]M. Hillert and B. Sundman, A solute-drag treatment of the transition from diffusion-controlled to diffusionless solidification, Acta Metallurgica 25, 11 (1977).DOI
  22. [22]J. C. Baker, Interfacial partitioning during solidification, Ph.D. thesis, Massachusetts Institute of Technology (1970).
  23. [23]W. J. Boettinger, J. A. Warren, C. Beckermann, and A. Karma, Phase-field simulation of solidification, Annual Review of Materials Research 32, 163 (2002).DOI
  24. [24]D. Tourret, H. Liu, and J. Llorca, Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges, Progress in Materials Science 123, 100810 (2022).arxiv.org/abs/2104.09915
  25. [25]L.-Q. Chen, Phase-field models for microstructure evolution, Annual Review of Materials Research 32, 113 (2002).DOI
  26. [26]N. Moelans, B. Blanpain, and P. Wollants, An introduction to phase-field modeling of microstructure evolution, Calphad 32, 268 (2008).
  27. [27]I. Steinbach, Phase-field model for microstructure evolution at the mesoscopic scale, Annual Review of Materials Research 43, 89 (2013).DOI
  28. [28]A. Karma, Phase-field formulation for quantitative modeling of alloy solidification, Physical Review Letters 87, 115701 (2001).DOI
  29. [29]R. F. Almgren, Second-order phase field asymptotics for unequal conductivities, SIAM Journal on Applied Mathematics 59, 2086 (1999).DOI
  30. [30]A. Karma and W.-J. Rappel, Quantitative phase-field modeling of dendritic growth in two and three dimensions, Physical Review E 57, 4323 (1998).
  31. [31]M. Ohno and K. Matsuura, Quantitative phase-field modeling for dilute alloy solidification involving diffusion in the solid, Physical Review E 79, 031603 (2009).pubmed.ncbi.nlm.nih.gov/19391950
  32. [32]L. Zhang, E. V. Danilova, I. Steinbach, D. Medvedev, and P. K. Galenko, Diffuse-interface modeling of solute trapping in rapid solidification: Predictions of the hyperbolic phase-field model and parabolic model with finite interface dissipation, Acta Materialia 61, 4155 (2013).DOI
  33. [33]A. Mullis, J. Rosam, and P. Jimack, Solute trapping and the effects of anti-trapping currents on phase-field models of coupled thermo-solutal solidification, Journal of Crystal Growth 312, 1891 (2010).DOI
  34. [34]N. Ahmad, A. Wheeler, W. J. Boettinger, and G. B. McFadden, Solute trapping and solute drag in a phase-field model of rapid solidification, Physical Review E 58, 3436 (1998).
  35. [35]A. A. Wheeler, W. J. Boettinger, and G. B. McFadden, Phase-field model for isothermal phase transitions in binary alloys, Physical Review A 45, 7424 (1992).pubmed.ncbi.nlm.nih.gov/9906814
  36. [36]S. G. Kim, W. T. Kim, and T. Suzuki, Phase-field model for binary alloys, Physical Review E 60, 7186 (1999).pubmed.ncbi.nlm.nih.gov/11970661
  37. [37]D. Danilov and B. Nestler, Phase-field modelling of solute trapping during rapid solidification of a Si–As alloy, Acta Materialia 54, 4659 (2006).DOI
  38. [38]M. Conti, Solute trapping in directional solidification at high speed: A one-dimensional study with the phase-field model, Physical Review E 56, 3717 (1997).
  39. [39]S. G. Kim and W. T. Kim, Phase-field modeling of rapid solidification, Materials Science and Engineering: A 304, 281 (2001).DOI
  40. [40]K. Glasner, Solute trapping and the non-equilibrium phase diagram for solidification of binary alloys, Physica D: Nonlinear Phenomena 151, 253 (2001).DOI
  41. [41]A. A. Wheeler, W. J. Boettinger, and G. B. McFadden, Phase-field model of solute trapping during solidification, Physical Review E 47, 1893 (1993).pubmed.ncbi.nlm.nih.gov/9960211
  42. [42]W. J. Boettinger and J. A. Warren, Simulation of the cell to plane front transition during directional solidification at high velocity, Journal of Crystal Growth 200, 583 (1999).DOI
  43. [43]I. Steinbach, L. Zhang, and M. Plapp, Phase-field model with finite interface dissipation, Acta Materialia 60, 2689 (2012).
  44. [44]T. Pinomaa and N. Provatas, Quantitative phase field modeling of solute trapping and continuous growth kinetics in quasi-rapid solidification, Acta Materialia 168, 167 (2019).
  45. [45]B. Echebarria, R. Folch, A. Karma, and M. Plapp, Quantitative phase-field model of alloy solidification, Physical Review E 70, 061604 (2004).DOI
  46. [46]K. Ji, E. Dorari, A. J. Clarke, and A. Karma, Microstructural pattern formation during far-from-equilibrium alloy solidification, arXiv preprint arXiv:2209.11352 (2022).DOI
  47. [47]E. A. Brener and G. Boussinot, Kinetic cross coupling between nonconserved and conserved fields in phase field models, Physical Review E 86, 060601 (2012).pubmed.ncbi.nlm.nih.gov/23367883
  48. [48]G. Boussinot and E. A. Brener, Achieving realistic interface kinetics in phase-field models with a diffusional contrast, Physical Review E 89, 060402 (2014).DOI
  49. [49]H. Wang, F. Liu, G. Ehlen, and D. Herlach, Application of the maximal entropy production principle to rapid solidification: a multi-phase-field model, Acta Materialia 61, 2617 (2013).
  50. [50]A. Fang and Y. Mi, Recovering thermodynamic consistency of the antitrapping model: A variational phase-field formulation for alloy solidification, Physical Review E 87, 012402 (2013).pubmed.ncbi.nlm.nih.gov/23410339
  51. [51]M. Ohno, T. Takaki, and Y. Shibuta, Variational formulation and numerical accuracy of a quantitative phase-field model for binary alloy solidification with two-sided diffusion, Physical Review E 93, 012802 (2016).DOI
  52. [52]M. Ohno, T. Takaki, and Y. Shibuta, Variational formulation of a quantitative phase-field model for nonisothermal solidification in a multicomponent alloy, Physical Review E 96, 033311 (2017).DOI
  53. [53]K. Wang, G. Boussinot, C. Hüter, E. A. Brener, and R. Spatschek, Modeling of dendritic growth using a quantitative nondiagonal phase field model, Physical Review Materials 4, 033802 (2020).DOI
  54. [54]K. Wang, G. Boussinot, E. A. Brener, and R. Spatschek, Quantitative nondiagonal phase field modeling of eutectic and eutectoid transformations, Physical Review B 103, 184111 (2021).DOI
  55. [55]M. Nicoli, M. Plapp, and H. Henry, Tensorial mobilities for accurate solution of transport problems in models with diffuse interfaces, Physical Review E 84, 046707 (2011).DOI
  56. [56]C. Gugenberger, R. Spatschek, and K. Kassner, Comparison of phase-field models for surface diffusion, Physical Review E 78, 016703 (2008).pubmed.ncbi.nlm.nih.gov/18764077
  57. [57]K. Ahmed, C. Yablinsky, A. Schulte, T. Allen, and A. El-Azab, Phase field modeling of the effect of porosity on grain growth kinetics in polycrystalline ceramics, Modelling and Simulation in Materials Science and Engineering 21, 065005 (2013).DOI
  58. [58]N. Provatas and K. Elder, Phase-field methods in materials science and engineering (John Wiley & Sons, 2011).DOI
  59. [59]P. Algoso, W. Hofmeister, and R. Bayuzick, Solidification velocity of undercooled Ni–Cu alloys, Acta Materialia 51, 4307 (2003).DOI
  60. [60]J. Kittl, P. Sanders, M. Aziz, D. Brunco, and M. Thompson, Complete experimental test of kinetic models for rapid alloy solidification, Acta Materialia 48, 4797 (2000).DOI
  61. [61]Y. Yang, H. Humadi, D. Buta, B. B. Laird, D. Sun, J. J. Hoyt, and M. Asta, Atomistic simulations of nonequilibrium crystal-growth kinetics from alloy melts, Physical Review Letters 107, 025505 (2011).pubmed.ncbi.nlm.nih.gov/21797620
  62. [62]C. A. Hareland, G. Guillemot, C.-A. Gandin, and P. W. Voorhees, The thermodynamics of non-equilibrium interfaces during phase transformations in concentrated multicomponent alloys, Acta Materialia , 118407 (2022).DOI
  63. [63]W. Boettinger, D. Shechtman, R. Schaefer, and F. Biancaniello, The effect of rapid solidification velocity on the microstructure of Ag-Cu alloys, Metallurgical Transactions A 15, 55 (1984).DOI
  64. [64]W. Kurz and R. Trivedi, Banded solidification microstructures, Metallurgical and Materials Transactions A 27, 625 (1996).DOI
  65. [65]W. W. Mullins and R. Sekerka, Stability of a planar interface during solidification of a dilute binary alloy, Journal of Applied Physics 35, 444 (1964).
  66. [66]S. Coriell and R. Sekerka, Oscillatory morphological instabilities due to non-equilibrium segregation, Journal of Crystal Growth 61, 499 (1983).DOI
  67. [67]A. Karma and A. Sarkissian, Interface dynamics and banding in rapid solidification, Physical Review E 47, 513 (1993).pubmed.ncbi.nlm.nih.gov/9960028

Paper details

vlnc:W_a4mwcyny
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 10

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents