betaFeedback

WorksPhysics and Astronomy

Photostriction-Driven Phase Transition in Layered Chiral NbOX2_2 Crystals: Electrical-Field-Controlled Enantiomer Selectivity

Abstract

Chiral crystals offer an unique platform for controlling structural handedness through external stimuli. However, the ability to select between structural enantiomers remains challenging, both theoretically and experimentally. In this work, we demonstrate a two-step pathway for enantiomer selectivity in layered chiral NbOX2_2 (X = Cl, Br, I) crystals based on photostriction-driven phase transitions. Ab-initio simulations reveal that optical excitation is capable of inducing a structural phase transition in NbOX2_2 from the monoclinic (C2C2) ground state to the higher-symmetry (C2/mC2/m) structure. In the resulting transient high-symmetry state, an applied electric field breaks the residual inversion-symmetry degeneracy, selectively stabilizing one enantiomeric final state configuration over the other. Our results establish a combined optical-electrical control scheme for chiral materials, enabling reversible and non-contact enantiomer selection with potential applications in ultrafast switching, optoelectronics, and chiral information storage.

Introduction

Chirality is a fundamental symmetry concept in physics, chemistry and biology, where an object cannot be geometrically superimposed with its mirror image. In crystalline solids, chirality emerges from structural arrangements that lack inversion or mirror symmetries, producing enantiomers with identical chemical composition but potentially different physical behaviors[1, 2]. This structural handedness governs diverse phenomena, such as circular dichroism[3], chiral phonon transport[4], enantioselective catalysis[5], and chiral-induced spin selectivity6,7, with applications spanning optoelectronics, spintronics, and emerging quantum materials and devices8–10.

One of the major challenges in material science lies in achieving enantioselective control, that is, the ability to reversibly switch between distinct enantiomeric states. Photostriction, the light-induced deformation of crystals, provides a non-contact pathway for inducing symmetry and phase transitions through non-thermal strain generated under illumination11. This optomechanical effect opens new perspectives for integrating light-driven structural control into switchable devices. Photostriction has been extensively investigated in ferroelectrics12, multiferroic interfaces13, polar semiconductors14,15, organic polymers16, and materials exhibiting switchable properties17,18, just to name a few instances.

The focus of this work is the family of layered niobium oxide dihalides, NbOX₂ (X=Cl,Br,IX = \mathrm{Cl}, \mathrm{Br}, \mathrm{I}), which has recently emerged as a versatile platform for exploring the interplay between chirality, ferroelectricity, and external stimuli. These materials crystallize in a monoclinic (C2C2) structure that is intrinsically chiral, while hosting robust in-plane ferroelectricity persisting from the monolayer limit to the bulk19,20. In addition to their tunable ferro- and antiferroelectric order, NbOX₂ compounds exhibit exceptional optoelectronic characteristics, including strong light absorption in the visible range21, high second-harmonic generation efficiencies22, and even monolayer-like excitonic behavior in the bulk23. Their unique combination of tunable ferroelectric order and pronounced nonlinear optical response makes them attractive not only for polarization-sensitive optoelectronic devices, but also as a direct platform to drive structural phase transitions24.

A promising strategy for controlling structural chirality is to exploit materials in which a chiral ground state lies energetically close to an achiral configuration1. Gutierrez-Amigo Gutierrez-Amigo et al. [25] recently demonstrated this mechanism in the NbOX2NbOX_2 family, where two enantiomorphic C2C2 ground states are linked through a low-energy achiral C2/mC2/m phase. The relatively small barrier between the chiral ground state and this intermediate achiral configuration provides a natural pathway for such symmetry control. This intermediate state can be stabilized by anharmonic effects or external pressure, while the ultimate handedness can be selectively imposed by a symmetry-breaking electric field.

In this work, we introduce a photostriction-driven mechanism to control structural chirality in bulk NbOX2NbOX_2 crystals. We propose a two-step process: (1) photoexcitation to generate a structural deformation that drives the system into the achiral C2/mC2/m phase, and (2) an external electric field to steer the relaxation pathway towards a chosen enantiomer, thereby establishing a fully optoelectrical protocol for enantiomer selection in layered chiral ferroelectrics, as illustrated in Fig. 1(a). To validate this mechanism, we compute the shift current response, demonstrating: (i) the mirror-symmetric relation between the two enantiomeric ground states and (ii) how this nonlinear effect can be exploited as a chiral-selective control mechanism.

Our article is organized as follows. First, we describe the ab initio computational methods and structural properties for NbOX2NbOX_2 crystals. Next, we examine the photostriction-induced phase transition, supported by phonon and band structure calculations to evaluate phase stability. We then analyze the effect of an external electric field in selecting a particular enantiomeric final state and assess the corresponding shift-current response. Finally, we summarize the main findings and discuss their implications for controlling chirality in ferroelectric materials.

Computation details

All calculations were performed within density functional theory (DFT) using the Quantum ESPRESSO package (version 7.3) [26,27] with Optimized Norm-Conserving Vanderbilt pseudopotentials including valence electrons. A plane-wave cutoff of 50 Ry was used for the wavefunctions and 400 Ry for the charge density, together with a Methfessel–Paxton [28] smearing of 0.02 Ry. The Brillouin-zone integrations employed an 8×8×58 \times8 \times5 Monkhorst–Pack kk-point mesh. Structural relaxations were carried out until atomic forces were smaller than 10−410^{-4} Ry/Bohr and stress components were below 0.1 kbar. Exchange–correlation effects were treated within the generalized gradient approximation (GGA) using the Perdew–Burke–Ernzerhof (PBE) functional [29]. Interlayer interactions were accounted for through van der Waals corrections using the semi-empirical DFT-D2 scheme of Grimme et al. [30], which ensures the correct energetic ordering of phases and improves agreement between calculated and experimental lattice parameters (see Supplementary I).

To model laser irradiation, we adopted the scheme proposed in Ref. [31,32] for semiconductors and insulators, in which photocarrier excitation is simulated by promoting a fraction xx of valence electrons to conduction-band states, corresponding to a photocarrier concentration ne=xe−/u.c.n_{\mathrm{e}} = x e^{-}/\mathrm{u.c.}, where u.c. denotes the unit cell. Harmonic phonon spectra were obtained within density functional perturbation theory (DFPT) on a 2×2×22 \times2 \times2 qq-point mesh for both the C2/mC2/m and C2C2 phases. Spin–orbit coupling (SOC) was neglected in these calculations, and phonon dispersions were generated by Fourier interpolation. Ferroelectric properties, were computed using the modern theory of polarization (Berry-phase formalism) as implemented in Quantum Espresso [33].

Shift-current responses were computed using the Wannierization approach implemented in Wannier90 [34] and WannierBerri [35,36]. The tight-binding model was constructed by projecting onto O-pp, X-pp (X = Cl, Br, I), and Nb-dd orbitals, centered on their respective atomic sites.

Structural and electronic properties of NbOX2NbOX_2

The family of van der Waals (vdW) materials NbOX2NbOX_2 (X = Cl, Br, I) consists of stacked NbOX2NbOX_2 monolayers along the out-of-plane aa-axis. As illustrated in Fig. 1(b), within each monolayer the Nb atoms are arranged in chains of edge-sharing distorted octahedra, interconnected through O atoms along the bb-direction. A displacement of atoms along the cc-axis leads to a Peierls distortion, accompanied by a metal-to-insulator transition [37]. In addition, a second-order Peierls distortion along the bb-axis displaces Nb atoms off-center within the NbOX2NbOX_2 octahedra toward the corner O atoms. This distortion produces two nonequivalent Nb–O bond lengths and induces in-plane spontaneous polarization (ferroelectricity) along the bb-direction. These structural features are depicted in Fig. 1(b) (octahedra environment), where the two inequivalent Nb–O bonds (did_i, djd_j) are highlighted. Together, these distortions stabilize a monoclinic structure with space group C2C2 along the bb-axis.

To further characterize NbOX2NbOX_2 we performed DFT calculations of its band structure and density of states (DOS), following the description in Ref. 20,37 (see Supplementary III). All structures exhibit a finite band gap, with contributions primarily from Nb-4d4d and X-pp orbitals. A nearly flat band appears close to the Fermi level EFE_F, arising from the localized dz2d_{z^2} orbitals of the underlayer Nb atoms. Within a crystal field picture, the Nb-dd manifold splits into three non-degenerate orbitals (dz2d_{z^2}, dxzd_{xz}, dx2−y2d_{x^2-y^2}) and a doubly degenerate pair (dxyd_{xy}, dyzd_{yz}). Given the valence configuration of Nb (4d55s14d^5 5s^1), each Nb4+Nb^{4+} cation contributes a single unpaired 4d4d electron, which half-fills the dz2d_{z^2} orbital. Dimerization of Nb atoms along the cc-axis, corresponding to a Peierls distortion, further splits the dz2d_{z^2} states into bonding- and antibonding-like levels. The bonding branch forms an isolated flat band near the top of the valence band (VB), while the antibonding counterpart is shifted to about 1 eV above the conduction band (CB) minimum. In addition, O-2p and X-p orbitals contribute mainly to the VB at lower energies, remaining well separated from the flat Nb-dz2d_{z^2} band.

Figure 1. (a) Schematic view of the two-step crystal chirality selection mechanism proposed: (1) light-induced nonthermal phase transition and (2) electric-field–driven enantiomer stabilization. (b) Layered structure of NbOX2_2 (X = Cl, Br, I), with Nb (blue), O (red), and X (yellow) atoms; did_i and djd_j denote Nb–O bond lengths. (c–e) Evolution of lattice constants (upper panels) and space group (lower panels) as a function of the photocarrier concentration for (c): NbOCl2_2, (d): NbOBr2_2, and (e): NbOI2_2, respectively. Purple line represent the quantity required for a symmetry-phase transition.

Photo-induced phase transitions

Having established the chiral ground state, we now turn to the effect of photoexcitation in these materials. Upon above-bandgap excitation, absorbed photons generate a non-equilibrium carrier distribution that instantaneously modifies the electronic density and, consequently, the Born–Oppenheimer potential energy surface experienced by the nuclei. In NbOX2_2 this redistribution couples strongly to polar lattice degrees of freedom through both

the piezoelectric response and the electronic (photostrictive) pressure. The resulting stress is highly anisotropic, leading to differential changes in key Nb–O bond lengths (did_i and djd_j) within the layers, as well as in the lattice parameters, thereby reshaping the Born–Oppenheimer potential landscape, as illustrated in Fig. 1(a) (yellow line).

We computed the lattice parameters and space group evolution of NbOX2_2 as a function of photocarrier concentration, as shown in Fig. 1(c–d). All symmetry phases (bottom) were identified using the Spglib package38 with a tolerance of 0.002 Å. At low excitation densities, the induced strain remains within the elastic regime, preserving the original chiral C2C2 symmetry. However, beyond a critical carrier density nen_e (dashed purple line), photostrictive deformation drives a cooperative lattice instability, selectively softening phonon modes associated with the Nb–O bonding network. This leads to a higher-symmetry achiral phase (C2/mC2/m), consistent with the mechanism proposed in Ref.25. Phonon and band-structure calculations were performed for both the ground state and the photoinduced phases under dark conditions, confirming the stability of the chiral phase and showing that the higher-symmetry structure exhibits unstable phonon modes and is therefore dynamically unstable (see Supplementary II).

Figure 2. (a) Schematic illustration (along the cc-axis) of the electric-field–selective mechanism, represented in terms of right- and left-handed structures defined by the Nb–O bond lengths (did_i, djd_j). (b) Calculated shift-current spectra as a function of photon energy for the structures in (a): achiral (orange), right-handed (dashed red), and left-handed (solid blue). (c) Energy–polarization double-well profiles for ferroelectric bulk NbOX2_2. Dots denote the calculated data, while solid lines represent fits based on the Landau model (see Supplementary V).

To estimate the laser fluence required to excite the critical photocarrier concentrations (ne≈0.15n_e \approx0.15–0.350.35 e−e^{-}/f.u.), we estimate the required laser fluence I0I_0 needed to generate this carrier concentration by relating it to the material’s fundamental optical properties, as 39,40:

ne=I0(1−R)αΩ0ℏω,(1)n_e = \frac{I_0(1-R)\alpha\Omega_0}{\hbar\omega}, \tag*{(1)}

where RR is the reflectivity, α\alpha is the absorption coefficient, Ω0\Omega_0 is the unit cell volume, and ℏω\hbar\omega is the photon energy. We computed α\alpha and RR from the frequency-dependent dielectric tensor (see Supplementary Material IV).

The results, summarized in Table I, show that the fluences required to reach the critical carrier density nen_e span from 1.55 mJ/cm2^2 to 25.30 mJ/cm2^2 for bulk NbOX2_2. These values fall well within the operational range of standard ultrafast laser systems, confirming the practical feasibility of the photoexcitation step in our proposed mechanism 41. Notably, the strong increase in the absorption coefficient α\alpha along the Cl–Br–I series leads to a pronounced reduction in the required fluence, highlighting NbOI2_2 as the most favorable candidate for experimental realization.

Materialnen_e (e−^{-}/f.u.)α\alpha (cm−1^{-1})Ω0\Omega_0 (Å3^3)RRI0I_0 (mJ/cm2^2)
NbOCl2_20.354.11×1044.11 \times10^4164.630.34525.30
NbOBr2_20.206.45×1046.45 \times10^4184.170.3878.78
NbOI2_20.152.612×1052.612 \times10^5215.410.4501.55

Table 1. Estimated laser fluence (I0I_0) required to drive the photoinduced phase transition. The critical carrier density nen_e is determined from the structural calculations in Fig. 1(c-d). The absorption coefficient α\alpha and reflectivity RR are calculated averages at 2.0 eV. The unit cell volume Ω0\Omega_0 is computed from the C2C2 ground state.

Electric Field Effects on Enantiomer Selectivity

The use of external electric fields to control symmetry has been widely explored, particularly in field-induced alignment and orientation of atomic and molecular systems. In these studies, the reflection symmetry was broken by converting an initially aligned population of atoms or molecules into a transverse orientation, establishing one of the earliest paradigms for field-driven symmetry breaking42,43. We extend this principle to induce a preferred handedness by selectively stabilizing one enantiomer depending on the sign of the applied electric field E\mathbf{E}.

As discussed in the previous section, reaching the critical photocarrier concentration drives the system into a centrosymmetric (achiral) structure characterized by uniform Nb–O bond lengths (see Fig. 2(a)). Thermodynamically, once the laser is turned off, this achiral state can relax into either of the two enantiomers with equal probability. Previous work25 suggests that the relaxation pathway proceeds via the Γ1−\Gamma^{-}_{1} mode into the chiral phase; however, an external bias (i.e., an applied electric field) can favor one enantiomer over the other. To test this idea, we simulated the NbOBr2_2 structure by quenching the photostrictive deformation (turning off the laser) and relaxing the system under an external electric field E\mathbf{E} applied along the b∗b^{*} reciprocal direction with an intensity of 10−710^{-7} a.u. (0.514 kV/cm). As shown in Fig. 2(a), the direction of the electric field (E\mathbf{E}) breaks mirror symmetry and biases the relaxation: a positive field drives the Nb atoms toward bond djd_{j} (E+E^{+}), stabilizing the left-handed enantiomer, while a negative field favors bond did_{i} (E−E^{-}), stabilizing the right-handed enantiomer. This switching simultaneously reverses the polarization direction, in agreement with Born–Oppenheimer simulations under applied electric fields reported in Ref. 25.

To probe the nature of the relaxed structures (achiral, right-handed, and left-handed), we calculated the shift current density (JaJ^{a}), a second-order nonlinear optical response, under an external electric field E\mathbf{E} of frequency ω\omega, following Refs.35,36:

Ja=2σabc(0;ω,−ω),Re⁡[Eb(ω)Ec(−ω)],(2)J^{a}=2\sigma^{abc}(0;\omega,-\omega),\operatorname{Re}\left[E_{b}(\omega)E_{c}(-\omega)\right], \tag*{(2)}

where σabc(0;ω,−ω)\sigma^{abc}(0;\omega,-\omega) is the third-rank shift-current response tensor, which transforms analogously to the piezoelectric tensor. By symmetry, the shift current vanishes in centrosymmetric systems. For the non-centrosymmetric C2C2 space group, group-theoretical analysis using the MTENSOR program (Bilbao Crystallographic Server44,45) identifies eight independent nonzero tensor components. To highlight the enantioselective response, we focus on the σyzz\sigma^{yzz} component (evaluated at the Fermi level), shown in Fig. 2(b) for the achiral, left-handed, and right-handed cases. As expected, the achiral configuration shows no shift-current response, whereas the two enantiomers display responses of equal magnitude but opposite sign. This opposite behavior, obtained from the relaxed structures after field-induced symmetry breaking, provides direct evidence that the two states are genuine mirror-related enantiomers and confirms the robustness of our combined photoexcitation–electric field approach for engineering and detecting chirality.

It is well established that ferroelectrics enable polarization reversal under an applied electric field, meaning that, in principle, a sufficiently strong field can switch both the polarization and, consequently, the chirality of these systems. To quantify this effect in bulk NbOX2_2, we performed Berry-phase polarization calculations and extracted the coercive field EcE_{\mathrm{c}} (see Supplementary V) from the energy–polarization double-well profiles shown in Fig. 2(c). The resulting switching barrier corresponds to a coercive field of ∼100\sim100 kV/cm, consistent with values reported experimentally for layered ferroelectrics19. While such fields are experimentally accessible, they are relatively large, posing challenges for reliable device integration and long-term operation. By contrast, our combined photoexcitation–electric field scheme reduces the required switching field by more than an order of magnitude. Specifically, we demonstrate polarization reversal with fields as small as ∼0.52\sim0.52 kV/cm, representing nearly two orders of magnitude reduction relative to the intrinsic bulk coercive field. This dramatic decrease highlights the efficiency of our approach: the optical excitation softens the energy landscape, and the subsequent electric field biases the system toward one enantiomer, enabling deterministic chirality selection. Beyond lowering energy costs, this mechanism opens the door to fast, reversible, and non-invasive control of ferroelectric chirality, making it highly attractive for next-generation applications in ultrafast memory, chiral electronics, and optoelectronic devices.

Conclusions

In this work, we have proposed and demonstrated a combined optical–electrical strategy to selectively stabilize a preferred handedness in NbOX2_2 layered materials. By photoexciting the system, we identified critical photocarrier concentrations that drive a chiral-to-achiral transition. Building on this, we showed that an applied electric field can break mirror symmetry in a controllable manner, with the field polarity determining the favored enantiomer. The computed shift-current response confirmed that the resulting left- and right-handed structures are true mirror-related enantiomers. Finally, Berry-phase calculations revealed that our approach significantly reduces the coercive field required for polarization reversal compared to bulk switching, highlighting a clear experimental advantage. Overall, these results establish photostriction-assisted electric-field control as a powerful platform for tuning structural chirality, opening opportunities for exploiting chiral degrees of freedom in ferroelectric materials with potential applications in devices.

Acknowledgements

M.G.V. thanks support to PID2022-142008NB-I00 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE, the Canada Excellence Research Chairs Program for Topological Quantum Matter and to Diputación Foral de Gipuzkoa Programa Mujeres y Ciencia. This work has been funded by the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC on behalf of the Department of Education of the Basque Government and the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), through the Würzburg-Dresden Cluster of Excellence on Complexity and Topology in Quantum Matter, ct.qmat (EXC 2147, Project ID 390858490) and the GA 3314/1-1 – FOR 5249 (QUAST). A.E. acknowledges funding from the Fonds zur Förderung der Wissenschaftlichen Forschung (FWF) under Grant No. I 5384. G.A.F. acknowledges funding from the National Science Foundation through DMR-2114825 and additional support from the Alexander support from the Alexander von Humboldt Foundation. The work of JLM has been partly supported by the Basque Government Grant No. IT1628-22 and the PID2021-123703NB-C21 grant funded by MCIN/AEI/10.13039/501100011033/ and ERDF; “A way of making Europe”. We acknowledge Iñigo Robredo, Aitzol García-Etxarri and Diego García Ovalle for discussions.

References

† [email protected]

Supplementary Material for: Photostriction-Driven Phase Transition in Layered Chiral NbOX2\mathrm{NbOX_2} Crystals: Electric-Field-Controlled Enantiomer Selectivity

Jorge Cardenas-Gamboa; Martin Gutierrez-Amigo; Aritz Leonardo; Gregory A. Fiete; Juan L. Mañes; Jeroen van den Brink; Claudia Felser; Maia G. Vergniory

Supplementary Material for: Photostriction-Driven Phase Transition in Layered Chiral NbOX2\mathrm{NbOX_2} Crystals: Electric-Field-Controlled Enantiomer Selectivity

Comparison of van der Waals treatments

Given the layered nature of NbOX2X_{2} (Fig. 1(a)), we tested several approaches for incorporating van der Waals (vdW) interactions in structural relaxations. Calculations were performed without spin–orbit coupling (SOC), starting from the experimental lattice parameters reported in Ref.[5]. We benchmarked three schemes: (i) Grimme’s empirical DFT-D2 correction[3], (ii) Grimme’s DFT-D3 correction[4], and (iii) a reference case without vdW corrections. The resulting relaxed lattice parameters were compared against experimental data (see Fig. S1). Among the tested schemes, DFT-D2 gave the best agreement, particularly along the interlayer axis, confirming its suitability for describing vdW interactions in this family. Therefore, all subsequent calculations employed the DFT-D2 correction.

Figure 1 (PDF p. 9). Comparison of van der Waals (vdW) treatments for (a, left) NbOBr2_{2} and (b, left) NbOI2_{2}. Experimental lattice parameters are taken from Ref.[5]. Panels (a, right) and (b, right) show the relative percentage error of each vdW scheme with respect to experiment.

Band Structures and Phonon Spectra at Different Photocarrier Concentrations

For the structures analyzed in Fig. 1(c–e), we report the corresponding electronic band structures and phonon spectra (calculated under dark conditions) at two representative photocarrier concentrations: (i) ne=0n_e = 0, corresponding to the ground state, and (ii) ne=ncn_e = n_c, where ncn_c denotes the critical carrier density required to drive the chiral-to-achiral (C2/mC2/m) phase transition (see dashed purple line in Fig. 2(c–e)). The results, presented in Fig. S2, show that in the achiral phase all NbOX2_2 compounds exhibit phonon instabilities, confirming that this structure is dynamically unstable.

Figure 2 (PDF p. 10). Electronic band structures and phonon spectra of NbOX2_2 at two representative photocarrier concentrations. (a,b) NbOCl2_2 at ne=0n_e = 0 (ground state) and ne=0.35n_e = 0.35 e−e^{-}/f.u., respectively. (c,d) NbOBr2_2 at ne=0n_e = 0 and ne=0.20n_e = 0.20 e−e^{-}/f.u. (e,f) NbOI2_2 at ne=0n_e = 0 and ne=0.15n_e = 0.15 e−e^{-}/f.u. In all cases, ne=0n_e = 0 corresponds to the equilibrium monoclinic phase, while finite carrier concentrations illustrate the critical regimes driving the chiral-to-achiral transition.

Projected Band-Structure

Orbital-resolved band structure and density of states of bulk NbOX2 in the monoclinic (C2) ground state

Figure 3. Orbital-resolved band structure and density of states (DOS) of bulk NbOX2 in the monoclinic (C2) ground state. The contribution of the Nb-dz2d_{z^2} orbital is highlighted by blue points in the band structure.

Optical absorption of bulk NbOX2

Figure 4. Calculated optical absorption coefficient (α\alpha) of ferroelectric NbOX2 bulk, obtained using the DFT-D2 functional. The spectra highlight the energy ranges relevant for photoexcitation processes and allow comparison of absorption edges across different halides. These results provide the basis for estimating the photocarrier concentrations required to drive the chiral-to-achiral transition.

Landau Model for Ferroelectric NbOX2

The ferroelectric behavior of NbOX2 can be described within the Landau free-energy expansion[1, 2]:

F(P)=12aP2+14bP4+16cP6−EP,(3)F(P) = \frac{1}{2}aP^{2} + \frac{1}{4}bP^{4} + \frac{1}{6}cP^{6} - EP, \tag*{(3)}

where PP is the polarization, aa, bb, and cc are expansion coefficients, and EE is the applied electric field. The coefficients were obtained by fitting the Berry-phase polarization energies to Eq. 1, as shown in Fig. 2(c).

The equilibrium polarization corresponds to the minima of F(P)F(P), determined by the stationary condition

∂F∂P=0,(4)\frac{\partial F}{\partial P} = 0, \tag*{(4)}

which leads to the constitutive relation

E=aP+bP3+cP5.(5)E = aP + bP^{3} + cP^{5}. \tag*{(5)}

Solving Eq. (5) yields the polarization–electric field (PP–EE) characteristics. From these, we extracted the coercive field EcE_{\mathrm{c}} for bulk NbOX2_2, i.e., the minimum external field required to reverse the spontaneous polarization. The computed PP–EE loops and the corresponding coercive fields are presented in Fig. S5.

Figure 5. Polarization–electric field (PP–EE) characteristics of bulk NbOX2_2 derived from the Landau free-energy expansion. The coercive field EcE_{\mathrm{c}} and spontaneous polarization values extracted from the fits are indicated in the legend.

References

References

  1. [1]E. M. Lifshitz, L. Pitaevskii, and V. Berestetskii, Statistical physics 5 (1980).
  2. [2]P. C. Hohenberg and A. P. Krekhov, Physics Reports 572, 1 (2015).
  3. [3]S. Grimme, Journal of computational chemistry 27, 1787 (2006).
  4. [4]S. Grimme, S. Ehrlich, and L. Goerigk, Journal of computational chemistry 32, 1456 (2011).
  5. [5]T. Fu, K. Bu, X. Sun, D. Wang, X. Feng, S. Guo, Z. Sun, Y. Fang, Q. Hu, Y. Ding, et al., Journal of the American Chemical Society 145, 16828 (2023).

Paper details

vlnc:W_a6zjt5me
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents