WorksComputer Science
Power Scaling Across Link Utilization with GPAM-4 Signaling and Event-Driven Reception
Abstract
This work highlights the potential of combining event-based signaling with event-driven reception to achieve receiver power scaling across link utilization, without requiring wake-up, locking, or data-rate reconfiguration. The approach is demonstrated using the proposed four-level Gaussian pulse-amplitude modulation (GPAM-4) scheme and a corresponding event-driven receiver. By employing a resettable ring voltage-controlled oscillator (RRVCO) as its front end, the receiver achieves inherently event-driven symbol measurement, initiated directly by each received pulse. Symbols are decoded directly from the final RRVCO phase state, eliminating a counter-based back end. Simulated in 28-nm CMOS, the receiver power is evaluated across a range of effective data rates—from 0.15 mW at the peak rate of 8 Gb/s, down to 2.5 W under active/idle operation and 1.6 W under data rate change at 80 Mb/s. The receiver thus achieves power reductions of and , while its energy per bit increases by only and , respectively.