betaFeedback

WorksPhysics and Astronomy

Quantum-classical framework for many-fermion response and structure

Abstract

Response functions are key observables for probing the structure and dynamics of many-body systems. We introduce and demonstrate a quantum-classical framework for computing response functions of general many-fermion systems that also provides the full bound-state spectrum. The framework employs the Lorentz integral transform and a new Hamiltonian input scheme that enables practical and scalable circuit constructions for general many-fermion Hamiltonians. Within this framework, we develop a hybrid strategy to evaluate the Lorentz integral and propose three protocols to extract response functions and bound-state structural information. As a demonstration, we apply the method to 19O{}^{19}\mathrm{O} with realistic internucleon interactions, computing both the bound-state spectrum and the response function. We envision that our approach will open new avenues for exploring the structure and dynamics of a broad class of many-body systems across diverse fields.

Introduction

Introduction.—The structure and dynamics of quantum many-body systems are fundamental to understanding strongly interacting systems across quantum chemistry [1, 2], nuclear physics [3, 4, 5, 6, 7], high-energy physics [8, 9], and condensed matter physics [10, 11]. Among the key observables are response functions [12, 13, 14], which encode rich information about both the dynamical and structural properties of these systems. Response functions define cross sections in scattering experiments [15, 16, 17, 18, 19, 20, 21] involving photons, electrons, neutrinos and nucleons. They also reveal essential structural information about the underlying quantum systems.

While response functions are important and useful quantities, their calculation is challenging. Such computations require access to both bound and continuum states, which obey different boundary conditions and therefore demand distinct numerical techniques, making a unified and consistent treatment difficult. Moreover, the number of many-body states grows exponentially with both the single-particle (SP) basis size and the particle number. This poses a significant challenge for first-principles evaluations of response functions in many-body systems on classical computers.

Quantum computers hold the promise for addressing quantum many-body problems that are intractable on classical computers [22]. Research efforts have been devoted to solving eigenvalue problems, including the variational [23, 24, 25, 26], subspace-expansion-based [27, 28, 29, 30, 31, 32, 33, 34, 35], and imaginary-time-evolution [36, 37] quantum eigensolvers. Meanwhile, quantum algorithms have also been proposed for simulating real-time evolution in many-body systems, such as the Trotter-based methods [38, 39], truncated Taylor series [40], truncated Dyson series [41], qubitization [42], time-dependent qubitization [43], qDrift [44], time-dependent qDrift [45], and Magnus-expansion-based method [47] [46]. Few approaches [48, 49, 50, 51, 52, 53, 54] have been proposed for quantum computing response functions that relate directly to reaction cross sections of realistic, strongly interacting systems; existing works are mainly based on time-evolution-based methods and have been demonstrated only for toy models, highlighting the need for practical and scalable algorithms applicable to response functions of realistic many-body systems.

In this work, we develop a quantum-classical framework for computing nuclear response functions, which also provides bound-state structural information. Our approach is based on the Lorentz integral transform (LIT) [55, 56], which has been widely applied to scattering processes such as nuclear photoabsorption and electroweak reactions [15, 16, 17, 18, 19] on classical computers. Within the LIT framework, the response function is mapped to a Lorentz integral (LI) via convolution with a smooth kernel. The LI can be evaluated by solving inhomogeneous many-body Schrödinger equations using only bound-state techniques. The response function is then extracted via the integral inversion.

Although conceptually powerful, the LIT approach is demanding in computational resources as it necessitates treating many-body problems on classical computers. We present a hybrid scheme that efficiently evaluates the LI for many-body systems using the Chebyshev polynomial expansion (CPE) [57, 58], where the evaluation of the LI reduces to quantum computation of a limited set of Chebyshev moments (CMs) determined by the many-body Hamiltonian and the system-probe interaction. We further propose protocols for computing the response functions and full bound-state spectra of many-body systems.

Our framework also employs a new Hamiltonian input scheme developed in our previous work [59], which enables practical and scalable circuit constructions for general second-quantized many-fermion Hamiltonians. Based on the ideas of Boolean masking and discrete-time quantum walks [60, 61, 62, 63], this efficient input scheme avoids the expensive compilation of second-quantized Hamiltonians for many-fermion systems and the intricate oracle constructions required by standard input methods (e.g., Jordan–Wigner [64, 65] or Bravyi–Kitaev encodings [66, 67] implemented with LCU [40, 68, 69]). By employing quantum signal processing [70, 71], our input scheme enables efficient evaluation of the CMs and, consequently, the LI.

Our hybrid framework establishes a practical and scalable approach for computing response functions of general many-fermion systems using future fault-tolerant quantum hardware. Moreover, it enables access to complete bound-state spectra of many-fermion systems, surpassing the above-mentioned quantum eigensolvers that target only a limited set of eigenenergies (e.g., the ground-state energy via VQE [25]). To the best of our knowledge, approaches that enable combined response-function and structural studies of realistic many-fermion systems on quantum computers remain largely unexplored.

We demonstrate the framework by computing the full bound-state spectrum and response function of 19O{}^{19}\mathrm{O} using a realistic strong-force interaction [72] developed from fundamental theories [73, 74, 75]. Our framework is directly applicable to other strongly interacting systems, such as those in hadronic structure and dynamics (e.g., within the BLFQ approach [76, 77, 78]), when combined with consistent input scheme for many-boson Hamiltonians [79].

Theory.– The second-quantized Hamiltonian of a general many-fermion system is

H=∑j⟨Qj∣H∣Pj⟩bQj†bPj,(1)H = \sum_{j} \langle Q_j \lvert H \rvert P_j \rangle b_{Q_j}^{\dagger} b_{P_j}, \tag*{(1)}

where we index each monomial by j∈[0,D−1]j \in[0,D-1]. We denote Qj↦{pj,qj,⋯ ,rj}Q_j \mapsto\{p_j,q_j,\cdots,r_j\} and Pj↦{uj,vj,⋯ ,wj}P_j \mapsto\{u_j,v_j,\cdots,w_j\}, where we order the SP bases as pj<qj<⋯<rjp_j < q_j < \cdots< r_j and uj<vj<⋯<wju_j < v_j < \cdots< w_j. The few-body matrix element is ⟨Qj∣H∣Pj⟩≡⟨pj,qj,⋯rj∣H∣uj,vj,⋯wj⟩\langle Q_j \lvert H \rvert P_j\rangle\equiv\langle p_j,q_j,\cdots r_j \lvert H \rvert u_j,v_j,\cdots w_j\rangle. We have bQj†≡apj†aqj†⋯arj†b_{Q_j}^{\dagger} \equiv a_{p_j}^{\dagger}a_{q_j}^{\dagger}\cdots a_{r_j}^{\dagger} and bPj≡awj⋯avjaujb_{P_j} \equiv a_{w_j}\cdots a_{v_j}a_{u_j}. The anticommutation relations hold for the fermion operators, i.e., {ap,aq†}=δp,q\{a_p,a_q^{\dagger}\}=\delta_{p,q}, {ap,aq}={ap†,aq†}=0\{a_p,a_q\}=\{a_p^{\dagger},a_q^{\dagger}\}=0. The fermion operators act on the occupation modes of SP basis “pp” as ap†∣0⟩p=∣1⟩pa_p^{\dagger}\lvert0\rangle_p=\lvert1\rangle_p, ap∣1⟩p=∣0⟩pa_p\lvert1\rangle_p=\lvert0\rangle_p, and ap†∣1⟩p=ap∣0⟩p=0a_p^{\dagger}\lvert1\rangle_p=a_p\lvert0\rangle_p=0.

The Schrödinger equation of the many-body system reads

(H−En)∣Ψn⟩=0,(2)(H-E_n)\lvert\Psi_n\rangle=0, \tag*{(2)}

where ∣Ψn⟩\lvert\Psi_n\rangle and EnE_n (with n=0,1,2,⋯n=0,1,2,\cdots) denote the eigenstate and corresponding eigenenergy, respectively.

The response function R(E)R(E) describes the system’s response to an external perturbative probe that transfers energy EE to it. R(E)R(E) admits the form [56]

R(E)=∫dn⟨Ψ0∣V†∣Ψn⟩⟨Ψn∣V∣Ψ0⟩δ(En−E),(3)R(E)=\int dn\langle\Psi_0\lvert V^{\dagger}\rvert\Psi_n\rangle\langle\Psi_n\lvert V\rvert\Psi_0\rangle\delta(E_n-E), \tag*{(3)}

with VV denoting the system-probe interaction operator. Combined with the factor that describes the kinematics, R(E)R(E) produces the reaction cross section. For clarity, we refer ∣Ω⟩=V∣Ψ0⟩\lvert\Omega\rangle=V\lvert\Psi_0\rangle as the “source state”.

While R(E)R(E) is a useful quantity, its first-principles calculations for many-body systems is generally challenging. Two major difficulties arise: (1) R(E)R(E) depends on a large number of bound and continuum states {∣Ψn⟩}\{\lvert\Psi_n\rangle\} subject to different boundary conditions, making their unified and consistent treatment computationally difficult; and (2) first-principles calculations for quantum many-body systems are computationally demanding on classical computers.

We address the first difficulty by utilizing the LIT [56] method, which presents a practical approach to consistently treating the bound and continuum states in solving R(E)R(E). In particular, one considers an integral transform

L(σ)=∫K(σ,E)R(E)dE.(4)\mathcal{L}(\sigma)=\int K(\sigma,E)R(E)dE. \tag*{(4)}

We take K(σ,E)K(\sigma,E) to be the Lorentzian kernel [(σ∗−E)(σ−E)]−1[(\sigma^{*}-E)(\sigma-E)]^{-1}, where σ=x+σR+iσI\sigma=x+\sigma_R+i\sigma_I with σR∈R\sigma_R\in\mathbb{R} and σI>0\sigma_I>0. In the following discussions, we denote the function f(σR,σI,x)f(\sigma_R,\sigma_I,x) as f(σ)f(\sigma) for simplicity. In contrast to existing literature [56], we introduce a free parameter xx in this work, where xx takes only two values, 00 and E0E_0. The utility of xx will become clear in the following discussion. We also note that various kernel choices have been considered in the literature (see, e.g., [53, 56, 80, 81, 82]), leading to different types of integral transformations; our framework discussed below is also adaptable to those cases.

The LI can be rewritten as

L(σ)=∫R(E)(E−x−σR)2+σI2dE=⟨Ψ~∣Ψ~⟩,(5)\mathcal{L}(\sigma)=\int\frac{R(E)}{(E-x-\sigma_R)^2+\sigma_I^2}dE=\langle\widetilde{\Psi}\lvert\widetilde{\Psi}\rangle, \tag*{(5)}

where ∣Ψ~⟩\lvert\widetilde{\Psi}\rangle can be solved from the inhomogeneous Schrödinger equation

(σ−H)∣Ψ~⟩=∣Ω⟩.(6)(\sigma-H)\lvert\widetilde{\Psi}\rangle=\lvert\Omega\rangle. \tag*{(6)}

It can be shown that ∣Ψ~⟩\lvert\widetilde{\Psi}\rangle is localized and has a finite norm [56]. Consequently, both the bound and continuum states of HH are encoded within ∣Ψ~⟩\lvert\widetilde{\Psi}\rangle that can be treated with bound-state-type techniques. This avoids the explicit handling of the distinct asymptotic behaviors of the system’s eigenstates.

Different from prototypical approaches [56] in solving ∣Ψ~⟩\lvert\widetilde{\Psi}\rangle, we utilize the CPE to evaluate the Green’s function G(σ,H)≡(σ−H)−1G(\sigma,H)\equiv(\sigma-H)^{-1}. This facilitates the introduction of quantum computing to handle the classically demanding many-body calculations in our hybrid approach. In particular, the CPE of G(σ,H)G(\sigma,H) is

G(σ,H)=∑k=0fk(σ)Tk(H),(7)G(\sigma,H)=\sum_{k=0} f_k(\sigma)T_k(H), \tag*{(7)}

where Tk(⋅)T_k(\cdot) is the Chebyshev polynomial of the first kind [83], with ∥H∥2∈[−1,1]\lVert H\rVert_2 \in[-1,1] (one rescales HH otherwise) and k=0,1,2,⋯k=0,1,2,\cdots. The expansion coefficient fk(σ)f_k(\sigma) is

fk(σ)=2−δk,0σ2−1(σ−σ2−1)k.(8)f_k(\sigma)=\frac{2-\delta_{k,0}}{\sqrt{\sigma^2-1}}\left(\sigma-\sqrt{\sigma^2-1}\right)^k . \tag*{(8)}

The summation is truncated according to the required numerical precision. With σI>0\sigma_I>0, G(σ,H)G(\sigma,H) is smooth for any σR∈R\sigma_R\in\mathbb{R}, as HH is Hermitian and its eigenvalues are real. Therefore, the CPE in Eq. (7) converges exponentially [57, 58, 84].

Compared to our previous work [59], where the Green’s function is approximated using a discrete Fourier transform combined with the CPE, the polynomial approximation [Eq. (7)] provides a more direct and convenient treatment of the Green’s function, in which the singularities are removed by introducing a finite positive σI\sigma_I. The polynomial approximation employed in this work can be further improved by the kernel polynomial method [85] for enhanced numerical precision and stability.

Based on the solution ∣Ψ~⟩=G(σ,H)∣Ω⟩|\widetilde{\Psi}\rangle=G(\sigma,H)|\Omega\rangle, we have

L(σ)=∑k=0∞∑j=0∞fk∗(σ)fj(σ)12(⟨Ω∣Tj+k(H)∣Ω⟩+⟨Ω∣T∣j−k∣(H)∣Ω⟩),(9)\mathcal{L}(\sigma)=\sum_{k=0}^{\infty}\sum_{j=0}^{\infty}f_k^*(\sigma)f_j(\sigma)\frac{1}{2}\left(\langle\Omega|T_{j+k}(H)|\Omega\rangle+\langle\Omega|T_{|j-k|}(H)|\Omega\rangle\right), \tag*{(9)}

where we have employed the identity 2Tj(ϵ)Tk(ϵ)=Tj+k(ϵ)+T∣j−k∣(ϵ)2T_j(\epsilon)T_k(\epsilon)=T_{j+k}(\epsilon)+T_{|j-k|}(\epsilon) with ϵ∈[−1,1]\epsilon\in[-1,1] [83]. In this sense, the LI is expressed as a linear combination of a limited set of CMs {⟨Ω∣Tn(H)∣Ω⟩}\{\langle\Omega|T_n(H)|\Omega\rangle\}. These CMs only depend on HH and VV, which determine the reaction dynamics.

The LI can be separated into two parts

L(σ)=∑nRn(σR−en)2+σI2⏟LD(σ)+∫eth∞deR(e)(σR−e)2+σI2⏟LC(σ).(10)\mathcal{L}(\sigma)=\underbrace{\sum_n\frac{R_n}{(\sigma_R-e_n)^2+\sigma_I^2}}_{\mathcal{L}_D(\sigma)}+\underbrace{\int_{e_{\mathrm{th}}}^{\infty}\mathrm{d}e\frac{R(e)}{(\sigma_R-e)^2+\sigma_I^2}}_{\mathcal{L}_C(\sigma)}. \tag*{(10)}

where LD(σ)\mathcal{L}_D(\sigma) and LC(σ)\mathcal{L}_C(\sigma) denote the contributions from the bound and continuum states, respectively. Notably, we define en=En−xe_n=E_n-x, e=E−xe=E-x, and eth=Eth−xe_{\mathrm{th}}=E_{\mathrm{th}}-x. For x=E0x=E_0, this notation accounts for excitation energies. Accordingly, we rewrite R(E)R(E) as R(e)R(e), whereby δ(En−E)\delta(E_n-E) is replaced by δ(en−e)\delta(e_n-e) and the integration limits are shifted consistently.

Quantum-classical framework.—To address the second difficulty, namely the exponential growth of computational resources required for first-principles many-body calculations, we propose a hybrid quantum-classical framework, whose workflow is illustrated in Figure 1. In this framework, quantum computers are employed to evaluate the CMs, which encode essential many-body physics and are computationally demanding on classical computers. These CMs are subsequently processed on classical computers to compute the structure and response functions, where this post-processing can be more efficiently performed classically than on quantum hardware.

Workflow of the quantum–classical algorithm

Figure 1. Workflow of the quantum–classical algorithm for solving the response function and bound-state spectrum. The circuit implements a standard Hadamard test [86], with the Hadamard gate denoted by HH. The gate VV is set to the identity for Re⁡⟨Ω∣Tk(H′)∣Ω⟩\operatorname{Re}\langle\Omega|T_k(H')|\Omega\rangle and to S†\mathsf{S}^{\dagger} for Im⁡⟨Ω∣Tk(H′)∣Ω⟩\operatorname{Im}\langle\Omega|T_k(H')|\Omega\rangle.

On the quantum computers, we employ the direct encoding scheme to map NspN_{\mathrm{sp}} SP bases onto NspN_{\mathrm{sp}} qubits, where each qubit records the occupation of the corresponding SP basis. The state of the qqth qubit is ∣bq⟩|b_q\rangle, with bq∈{0,1}b_q\in\{0,1\}, denoting that the qqth SP basis is unoccupied (bq=0b_q=0) or occupied (bq=1b_q=1), respectively. Accordingly, a many-fermion state is encoded as ∣F⟩=∣b0⟩∣b1⟩⋯∣bNsp−1⟩|F\rangle=|b_0\rangle|b_1\rangle\cdots|b_{N_{\mathrm{sp}}-1}\rangle, which corresponds to a binary string on the quantum register.

We employ a new Hamiltonian input scheme proposed in our previous work [59] to encode HH [Eq. (1)] on a quantum computer. This scheme constructs circuit representations of the fermionic operators, as well as their various combinations, based on the idea of Boolean masking [87], thereby avoiding expensive compilation overhead associated with the conventional Jordan–Wigner [64, 65] or Bravyi–Kitaev [66, 67] encodings. With these circuit representations, the quantum-walk approach [60, 61, 62] is employed to block-encode HH as [Eq. (8), [59]]

(⟨G∣s⊗⟨0∣a)Tb†Tf(∣F⟩s⊗∣0⟩a)=1B⟨G∣H∣F⟩,(11)\left(\langle\mathcal{G}|_s\otimes\langle0|_a\right)\mathcal{T}_b^\dagger\mathcal{T}_f\left(|F\rangle_s\otimes|0\rangle_a\right)=\frac{1}{\mathcal{B}}\langle G|H|F\rangle, \tag*{(11)}

where the subscripts ss and aa denote the system and ancilla registers, respectively. The states ∣G⟩|G\rangle and ∣F⟩|F\rangle encode the many-fermion states in the system register. Tb\mathcal{T}_b and Tf\mathcal{T}_f denote the circuit operations used to construct the quantum-walk states based on ∣G⟩|G\rangle, ∣F⟩|F\rangle, and HH. The factor B≥D\mathcal{B}\geq\mathcal{D} arises from the diffusion operators in the quantum circuit, whereas D≥max⁡j∣⟨Qj∣H∣Pj⟩∣\mathcal{D}\geq\max_j|\langle Q_j|H|P_j\rangle| with j∈[0,D−1]j\in[0,D-1] denotes the maximum norm of the input few-body matrix elements in Eq. (1).

By employing a specific technique to encode few-body matrix elements, this quantum-walk-based Hamiltonian input scheme provides a practical circuit design that avoids the explicit construction of the “Prepare oracle” required in the standard LCU approach [59], which can become challenging due to the need to extract a large number of matrix elements in general many-body systems. Interested readers are referred to Figure 2 of Ref. [59] for an explicit example of the circuit implementation of the Hamiltonian input scheme.

Excitation spectrum, LI, and response function of $^{19}\mathrm{O}$

Figure 2. (a) Excitation spectrum of 19O^{19}\mathrm{O}. The total angular momentum and parity are shown with each state. The results from the FCI calculations on classical computers and from the experiment [90] are also shown for comparison. (b) The LI as a function of σR\sigma_R of 19O^{19}\mathrm{O}. (c) Response function R(e)R(e) of 19O^{19}\mathrm{O} as a function of the excitation energy ee. See text for more details.

Based on Eq. (11), we block-encode the Chebyshev polynomial Tk(H′)T_k(H^\prime), with H′=H/(BΞ)H^\prime= H/(B\Xi), utilizing quantum signal processing [70, 71, 88]. For clarity, we denote the unitary that block-encodes Tk(H′)T_k(H^\prime) as UTkU_{T_k} in Figure 1. A circuit implementation of UTkU_{T_k} can be found, e.g., in Fig. S1 of Ref. [59].

Our input scheme enables efficient circuit construction for encoding general many-fermion Hamiltonians with low gate cost [59]. In particular, the gate complexity scales as O~(Nsp2η+1)\widetilde{O}(N_{\mathrm{sp}}^{2\eta+1}) for encoding Hamiltonians containing interaction terms up to η\eta-body operators, where the number of monomials scales as O~(Nsp2η)\widetilde{O}(N_{\mathrm{sp}}^{2\eta}). The number of qubits required to encode a many-fermion Hamiltonian in a basis of NspN_{\mathrm{sp}} SP states is Nsp+⌈log⁡2D⌉+4N_{\mathrm{sp}}+\lceil\log_{2}D\rceil+4. Accordingly, Tk(H′)T_k(H^\prime) is encoded using quantum signal processing with one additional qubit, and the corresponding gate complexity scales as O~(kNsp2η+1)\widetilde{O}(kN_{\mathrm{sp}}^{2\eta+1}).

In this work, we propose an oracle WΩW_{\Omega} to encode the source state ∣Ω⟩=V∣Ψ0⟩\lvert\Omega\rangle=V\lvert\Psi_{0}\rangle on the system register as ∣Ω⟩s=WΩ∣0⟩s\lvert\Omega\rangle_{s}=W_{\Omega}\lvert0\rangle_{s}. The systematic circuit design of WΩW_{\Omega}, consistent with our Hamiltonian input scheme, requires further developments, which we defer to our forthcoming work [89].

We employ the Hadamard test [86] to quantum compute the CMs based on the circuit representations of Tk(H′)T_k(H^\prime) and ∣Ω⟩\lvert\Omega\rangle, which are realized by the input scheme of Tk(H′)T_k(H^\prime) and the oracle WΩW_{\Omega}.

On the classical computers, we collect the CMs evaluated on quantum computers, which are combined with the expansion coefficients to compute the LI [Eq. (9)]. Based on the LI, we then introduce three protocols to extract the full bound-state spectrum (including the eigenenergies and their total angular momenta JJ) as well as the response function. The details of these oracles are as follows.

The first protocol determines the structural information of the Hamiltonian. Since the input schemes for both the Hamiltonian and the corresponding Chebyshev polynomials respect the underlying symmetries of the Hamiltonian, the calculations can be carried out within the cascading MJM_J scheme [5, 59]. In particular, if one elects the source state ∣ΩMJ⟩\lvert\Omega_{M_J}\rangle to be a single-configuration state with specific projection MJM_J of JJ (note that ∣ΩMJ⟩\lvert\Omega_{M_J}\rangle is not associated with any physical system-probe interaction), the resulting L(σ)\mathcal{L}(\sigma) receives contributions only from bound or continuum states satisfying J≥∣MJ∣J\geq\lvert M_J\rvert. Based on this scheme, we employ a set of single-configuration source states {∣ΩMJ⟩}\{\lvert\Omega_{M_J}\rangle\} with cascading MJM_J values to resolve the structural information of the bound states. The inputs, outputs, and methods of this protocol are summarized in Algorithm 1.

Algorithm 1: Prescan for spectral information
Input:
1. Single-configurations {∣ΩMJ⟩}\{\lvert\Omega_{M_J}\rangle\} with cascading MJM_J
2. σI\sigma_I fixed to be a small positive value
3. {σR}\{\sigma_R\} below the threshold
Methods:
1. Hybrid computations of L(σ)\mathcal{L}(\sigma) with x=0x=0
2. MJM_J scanning
3. Peak-structure fitting for LD(σ)\mathcal{L}_D(\sigma)
Output:
Bound-state information {En}\{E_n\} and {Jn}\{J_n\}

Table 1.

In practice, we set x=0x=0 and choose a small σI\sigma_I to ensure well-separated peaks in LD(σ)\mathcal{L}_D(\sigma), while sampling σR\sigma_R below the threshold energy EthE_{\mathrm{th}}. We compute the LI [Eq. (9)] as a function of σR\sigma_R for source states {∣ΩMJ⟩}\{\lvert\Omega_{M_J}\rangle\} with MJ>1M_J>1; for σR<Eth\sigma_R<E_{\mathrm{th}}, the response L(σ)\mathcal{L}(\sigma) receives contributions solely from the discrete component LD(σ)\mathcal{L}_D(\sigma) [Eq. (10)]. Bound-state energies EnE_n are extracted from the locations of the resolved peaks. Repeating the calculation with the source states {∣ΩMJ−1⟩}\{\lvert\Omega_{M_J-1}\rangle\} reveals newly appearing states with J=MJ−1J=M_J-1, whose eigenenergies are extracted analogously. Iterating this procedure within the cascading MJM_J scheme yields the energies {En}\{E_n\} and angular momenta {Jn}\{J_n\} of the bound states.

In the second protocol, we compute the coefficients {Rn}\{R_n\}, which quantify the contributions of discretized states to the response function induced by a physical probe (Algorithm 2). We employ the same parameter settings as in the first protocol, namely {σR}\{\sigma_R\}, σI\sigma_I, and x=0x=0, except that we adopt the physical source state ∣Ω⟩=V∣Ψ0⟩\lvert\Omega\rangle=V\lvert\Psi_0\rangle. The LI is evaluated within the hybrid framework [Eq. (9)]. We note that, for σR<Eth\sigma_R<E_{\mathrm{th}}, only the discrete contribution LD(σ)\mathcal{L}_D(\sigma) enters. With small σI\sigma_I, the peaks of LD(σ)\mathcal{L}_D(\sigma) are sufficiently separated, allowing {Rn}\{R_n\} to be extracted by fitting the Lorentzian line shape [Eq. (10)]. Using the bound-state energies {En}\{E_n\} obtained from the first protocol, each peak fit reduces to a single-parameter determination of RnR_n.

We note that RnR_n depends on the bound state ∣Ψn⟩\lvert\Psi_n\rangle and the physical source state ∣Ω⟩\lvert\Omega\rangle, i.e., Rn=⟨Ω∣Ψn⟩⟨Ψn∣Ω⟩R_n=\langle\Omega\vert\Psi_n\rangle\langle\Psi_n\vert\Omega\rangle. This identity provides a direct cross-check of the hybrid framework for model systems of limited size. For large many-body systems, however, the direct classical evaluation of RnR_n is computationally demanding; by exploiting the complementary strengths of quantum and classical computers, the present hybrid framework offers a viable and scalable solution.

Algorithm 2: Solving {Rn}\{R_n\}

Input:

  1. ∣Ω⟩=V∣Ψ0⟩|\Omega\rangle= V|\Psi_0\rangle

  2. σI\sigma_I fixed to be a small positive value

  3. {σR}\{\sigma_R\} below the threshold

  4. Bound-state energies {En}\{E_n\}

Methods:

  1. Hybrid computations of L(σ)\mathcal{L}(\sigma) with x=0x = 0

  2. Peak-structure fitting for LD(σ)\mathcal{L}_D(\sigma)

Output:

Bound-state response {Rn}\{R_n\}

In the third protocol, we compute the response function R(e)R(e) as a function of the excitation energy ee, using the physical source state ∣Ω⟩=V∣Ψ0⟩|\Omega\rangle= V|\Psi_0\rangle together with the inputs {En}\{E_n\} (equivalently {en}\{e_n\}) and {Rn}\{R_n\} obtained from the first two protocols. We summarize this protocol in Algorithm 3. In practice, we set x=E0x = E_0 and choose a moderate σI\sigma_I (e.g., of the order of ethe_{\mathrm{th}}) when evaluating the LI\mathcal{L}_I over σR∈[eth,emax⁡]\sigma_R \in[e_{\mathrm{th}}, e_{\max}], where emax⁡e_{\max} is some cutoff energy. For σR≥eth\sigma_R \ge e_{\mathrm{th}}, the LI\mathcal{L}_I receives contributions from both bound and continuum states Eq. (10). The continuum contribution LC(σ)\mathcal{L}_C(\sigma) is obtained by subtracting the discrete contribution LD(σ)\mathcal{L}_D(\sigma) from the LI\mathcal{L}_I, and R(e)R(e) is then extracted from LC(σ)\mathcal{L}_C(\sigma) using the integral inversion technique in Sec. 3.5 of Ref. [56].

Algorithm 3: Solving R(e)R(e)

Input:

  1. ∣Ω⟩=V∣Ψ0⟩|\Omega\rangle= V|\Psi_0\rangle

  2. σI\sigma_I fixed to be a moderate positive value

  3. {σR}\{\sigma_R\} values above threshold

  4. Bound-state energies {En}\{E_n\}

Methods:

  1. Hybrid computations of L(σ)\mathcal{L}(\sigma) with x=E0x = E_0

  2. Separating the LC(σ)\mathcal{L}_C(\sigma) from L(σ)\mathcal{L}(\sigma)

  3. Integral inversion for LC(σ)\mathcal{L}_C(\sigma)

Output:

Continuous-state response R(e)R(e)

Results and discussions.— We demonstrate the framework by computing the bound-state structure and response function of 19O{}^{19}\mathrm{O} using a nonrelativistic two-body Hamiltonian formulated in a three-dimensional harmonic-oscillator basis [91]. We retain the SP basis in the 0d5/21s1/20d_{5/2}1s_{1/2} orbitals and exclude those in the 0d3/20d_{3/2}. The few-body matrix elements of the Hamiltonian are available in Table S3 of Ref. [59]; these elements are derived from realistic nuclear interactions [72] via a transformation from the coupled basis to the SP basis [91]. The Hamiltonian is block encoded into a quantum circuit employing the input scheme of Ref. [59]. Although the present calculations are performed in a limited model space, the same approach can be extended to no-core shell model calculations [5, 92, 93] and to BLFQ studies of structure and dynamics in QCD systems [76, 77, 78, 94, 95, 96, 97, 98, 99].

We evaluate the CMs employing the IBM Qiskit [100] statevector simulator in noiseless mode and validate them against independent classical calculations. On future fault-tolerant quantum hardware, these moments can be obtained using standard quantum algorithms, such as the Hadamard test [86]. The LI is subsequently evaluated on a classical computer from the CMs according to Eq. (9).

We apply the first protocol to achieve the bound-state spectrum of 19O{}^{19}\mathrm{O} applying a set of many-body states. As stated in Algorithm 1, these states are of cascading MJM_J values, each of which is of a single configuration that can be prepared on the quantum computer in a straightforward manner. The resulting excitation spectrum is shown in Figure 2a, together with their JJ values and parities. These results agree with those obtained from classical calculations based on the full-configuration interaction (FCI) approach [4]. We expect better agreement with the experiment [90] when we further include the SP bases in the 0d3/20d_{3/2} shell.

Next, we demonstrate the protocols for solving the LI and the response function. To this end, we elect a simple source state ∣Ω⟩|\Omega\rangle that is chosen to be an equal-weight combination of the configurations (1s1/2−1)(1s1/2−1)(0d5/21)(1s_{1/2}^{-1})(1s_{1/2}^{-1})(0d_{5/2}^{1}), (1s1/2−1)(0d5/2−1)(0d5/21)(1s_{1/2}^{-1})(0d_{5/2}^{-1})(0d_{5/2}^{1}), and (0d5/2−1)(0d5/2−1)(0d5/21)(0d_{5/2}^{-1})(0d_{5/2}^{-1})(0d_{5/2}^{1}). This source state is obtained from the action of a test system-probe interaction VV (taken to be unitless) on the ground state ∣Ψ0⟩|\Psi_0\rangle of 19O{}^{19}\mathrm{O}. We implement the oracle WΩW_{\Omega} to encode ∣Ω⟩|\Omega\rangle, where, in this work, the circuit of WΩW_{\Omega} is realized by the protocol of initial state preparation in Qiskit.

Based on ∣Ω⟩|\Omega\rangle and the spectral information, we apply Algorithm 2 to obtain {Rn}\{R_n\}. Then, we apply Algorithm 3 to obtain LC(σ)\mathcal{L}_C(\sigma), based on which we obtain the response function R(e)R(e) for e≥ethe \ge e_{\mathrm{th}}. Here, we compute the threshold energy for the neutron separation to be eth=3.919e_{\mathrm{th}} = 3.919 MeV from the ground state energies of 18O{}^{18}\mathrm{O} and 19O{}^{19}\mathrm{O} obtained from our hybrid framework, which are E0(18O)=−11.155E_0({}^{18}\mathrm{O}) = -11.155 MeV and E0(19O)=−15.074E_0({}^{19}\mathrm{O}) = -15.074 MeV, respectively. This separation energy compare well with the experiment [90], which is 3.956 MeV.

We present the LI as a function of σR≥0\sigma_R \ge0 in Figure 2b, where σI\sigma_I is fixed to be 8 MeV for illustration. According to Eq. (10), only the bound states contribute to the LI below the threshold, while both the bound and continuum states contribute above it. The R(e)R(e) results for e≥ethe \ge e_{\mathrm{th}} are presented in Figure 2c. We find that the R(e)R(e) results converge well. We tested that the converged results are independent of σI\sigma_I over the range σI∈[5,14]\sigma_I \in[5,14] MeV based on the LC(σ)\mathcal{L}_C(\sigma) results with σR∈[eth,40]\sigma_R \in[e_{\mathrm{th}},40] MeV. The associated fitting uncertainties are indicated by the uncertainty band. Furthermore, as a validity check, we reconstruct the LI according to Eq. (10) based on the fitted results of R(e)R(e), {Rn}\{R_n\}, and {En}\{E_n\} in Figure 2b. The reconstructed LI agrees with the input data.

Conclusions and outlook.— We introduce a quantum-classical framework for computing response functions and the full bound-state spectra of general many-fermion systems. This framework is based on the LIT and a new input scheme that enables efficient and practical circuit construction for block-encoding secondquantized Hamiltonians. We propose a hybrid scheme to compute the LI using a limited set of CMs evaluated on quantum computers. These CMs are post-processed on classical computers to reconstruct the LI. Based on the LI, we further introduce three protocols for extracting bound-state structural information and response functions of many-fermion systems. Our framework is practical and scalable, opening a new avenue for addressing various many-fermion structure and dynamics problems in quantum chemistry, nuclear physics, and field theories on future fault-tolerant quantum computers.

As a demonstration, we apply the framework to 19O^{19}\mathrm{O} using a realistic internucleon interaction. We obtain the eigenenergies and total angular momenta of the full bound-state spectrum, which show good agreement with the FCI results from classical calculations. We also compute the response function for a test probe in this work. With realistic system-probe interactions, such response functions provide reaction cross sections when combined with the corresponding kinematics.

Going forward, we plan to develop an efficient scheme for constructing the source-state oracle WΩW_{\Omega}, including systematic circuit designs for a wide class of system-probe interaction operators, together with efficient algorithms for ground-state preparation [101, 102]. Building on the hybrid framework introduced here, and incorporating the Hamiltonian input scheme for many-boson systems [79], these developments will complete the toolkit for computing response functions of general many-body systems across various fields. Furthermore, we aim to simplify circuit designs (e.g., via quantum machine learning [103, 104]), thereby enabling demonstrations of the framework on NISQ hardware [105] for simplified model problems.

Acknowledgments.– We are grateful for fruitful discussions with Xilin Zhang. JPV and CY are thankful for discussions with Pieter Maris and Peter Love. WD acknowledges discussions with Andrey M. Shirokov and Peng Yin. This work was supported in part by the U.S. DOE Grant DE-SC0023707 under the Office of Nuclear Physics Quantum Horizons program for the “Nuclei and Hadrons with Quantum Computers (NuHaQ)” project. This project was also supported in part by NSF Grant No. 2435255 (NQVL-QSTD: Q-BLUE). WD is supported by startup funding from the Chinese Academy of Sciences.

References

References

  1. [1]D. Cook, Handbook of Computational Quantum Chemistry, Dover Books on Chemistry (Dover Publications, 2012).
  2. [2]B. Bauer, S. Bravyi, M. Motta, and G. K.-L. Chan, Quantum algorithms for quantum chemistry and quantum materials science, Chemical Reviews 120, 12685 (2020).DOI
  3. [3]E. Caurier, G. Martínez-Pinedo, F. Nowacki, A. Poves, and A. P. Zuker, The shell model as a unified view of nuclear structure, Rev. Mod. Phys. 77, 427 (2005).DOI
  4. [4]M. Hjorth-Jensen, M. Lombardo, and U. van Kolck, An Advanced Course in Computational Nuclear Physics: Bridging the Scales from Quarks to Neutron Stars, Lecture Notes in Physics (Springer International Publishing, 2017).
  5. [5]B. R. Barrett, P. Navrátil, and J. P. Vary, Ab initio core shell model, Prog. Part. Nucl. Phys. 69, 131 (2013).
  6. [6]M. Goldberger and K. Watson, Collision Theory, Dover books on physics (Dover Publications, 2004).
  7. [7]S. Wong, Introductory Nuclear Physics, A Wiley-Interscience publication (Wiley, 1998) p. 418.
  8. [8]M. Peskin, An Introduction To Quantum Field Theory (CRC Press, 2018).
  9. [9]S. J. Brodsky, H.-C. Pauli, and S. S. Pinsky, Quantum chromodynamics and other field theories on the light cone, Physics Reports 301, 299 (1998).DOI
  10. [10]E. Fradkin, Field Theories of Condensed Matter Physics (Cambridge University Press, 2013).DOI
  11. [11]M. Schreiber and T. Vojta, Computational Condensed Matter Physics: A Course for Self-Study and the Com- puter Laboratory, Advanced Texts in Physics (Springer-Verlag GmbH, 2005).
  12. [12]J. Carlson, S. Gandolfi, F. Pederiva, S. C. Pieper, R. Schiavilla, K. E. Schmidt, and R. B. Wiringa, Quantum many-body methods for nuclear physics, Rev. Mod. Phys. 87, 1067 (2015).
  13. [13]G. Stefanucci and R. van Leeuwen, Nonequilibrium Many-Body Theory of Quantum Systems: A Modern Introduction (Cambridge University Press, 2025).
  14. [14]A. Fetter and J. Walecka, Quantum Theory of Many-particle Systems, Dover Books on Physics (Dover Publications, 2003).
  15. [15]J. E. Sobczyk, B. Acharya, S. Bacca, and G. Hagen, Ab initio computation of the longitudinal response function in 40Ca, Phys. Rev. Lett. 127, 072501 (2021).DOI
  16. [16]S. Bacca, N. Barnea, G. Hagen, G. Orlandini, and T. Papenbrock, First principles description of the giant dipole resonance in 16O, Phys. Rev. Lett. 111, 122502 (2013).DOI
  17. [17]S. Bacca, N. Barnea, G. Hagen, M. Morelli, G. Orlandini, and T. Papenbrock, Giant and pigmy dipole resonances in 4He, 16,22O, and 40Ca from chiral nucleon-nucleon interactions, Phys. Rev. C 90, 064619 (2014).DOI
  18. [18]S. Quaglioni and P. Navrátil, The 4He total photo-absorption cross section with two- plus three-nucleon interactions from chiral effective field theory, Phys. Lett. B 652, 370 (2007), arXiv:0704.1336 [nucl-th].DOI
  19. [19]B. Acharya, J. E. Sobczyk, S. Bacca, G. Hagen, and W. Jiang, 16O electroweak response functions from first principles, Phys. Rev. Lett. 134, 202501 (2025).
  20. [20]J. E. Sobczyk, W. Jiang, and A. Roggero, Spin response of neutron matter in an ab initio approach, Phys. Rev. Lett. 134, 192701 (2025).DOI
  21. [21]G. Bertsch and T. Tsai, A study of the nuclear response function, Physics Reports 18, 125 (1975).DOI
  22. [22]R. P. Feynman, Simulating physics with computers, International Journal of Theoretical Physics 21 (1982).
  23. [23]Y. Cao, J. Cao, R. J. P. Olson, M. D. Grote, P. D. Johnson, M. Kieferová, I. D. Kivlichan, T. Menke, B. Peropadre, N. P. D. Sawaya, S. Sim, L. Veis, and A. A. Aspuru-Guzik, Quantum chemistry in the age of quantum computing, Chemical Reviews 119, 10856–10915 (2019).DOI
  24. [24]S. McArdle, S. Endo, A. Aspuru-Guzik, S. C. Benjamin, and X. Yuan, Quantum computational chemistry, Reviews of Modern Physics 92, 015003 (2020).DOI
  25. [25]J. Tilly, H. Chen, S. Cao, D. Picozzi, K. Setia, Y. Li, E. Grant, L. Wossnig, I. Rungger, G. H. Booth, and J. Tennyson, The variational quantum eigensolver: A review of methods and best practices, Physics Reports 986, 1–128 (2022).DOI
  26. [26]X. Yuan, S. Endo, Q. Zhao, Y. Li, and S. C. Benjamin, Theory of variational quantum simulation, Quantum 3, 191 (2019).DOI
  27. [27]N. Yoshioka, M. Amico, W. Kirby, P. Jurcevic, A. Dutt, B. Fuller, S. Garion, H. Haas, I. Hamura, A. Ivrii, R. Majumdar, Z. Minev, M. Motta, B. Pokharel, P. Rivero, K. Sharma, C. J. Wood, A. Javad-Abhari, and A. Mezzacapo, Krylov diagonalization of large many-body hamiltonians on a quantum processor, Nature Communications 16, 10.1038/s41467-025-59716-z (2025).DOI
  28. [28]J. Yu, J. R. Moreno, J. T. Iosue, L. Bertels, D. Claudino, B. Fuller, P. Groszkowski, T. S. Humble, P. Jurcevic, W. Kirby, T. A. Maier, M. Motta, B. Pokharel, A. Seif, A. Shehatta, K. J. Sung, M. C. Tran, V. Tripathi, A. Mezzacapo, and K. Sharma, Quantum-centric algorithm for sample-based krylov diagonalization (2025), arXiv:2501.09702 [quant-ph].arxiv.org/abs/2501.09702
  29. [29]W. Du and J. P. Vary, Systematic many-fermion Hamiltonian input scheme and spectral calculations on quantum computers, Phys. Lett. B 866, 139548 (2025), arXiv:2402.08969 [quant-ph].DOI
  30. [30]M. Motta, W. Kirby, I. Liepuoniute, K. J. Sung, J. Cohn, A. Mezzacapo, K. Klymko, N. Nguyen, N. Yoshioka, and J. E. Rice, Subspace methods for electronic structure simulations on quantum computers (2023), arXiv:2312.00178 [quant-ph].arxiv.org/abs/2312.00178
  31. [31]W. Kirby, M. Motta, and A. Mezzacapo, Exact and efficient lanczos method on a quantum computer, Quantum 7, 1018 (2023).DOI
  32. [32]E. N. Epperly, L. Lin, and Y. Nakatsukasa, A theory of quantum subspace diagonalization, SIAM Journal on Matrix Analysis and Applications 43, 1263–1290 (2022).DOI
  33. [33]N. H. Stair, C. L. Cortes, R. M. Parrish, J. Cohn, and M. Motta, Stochastic quantum krylov protocol with double-factorized hamiltonians, Phys. Rev. A 107, 032414 (2023).DOI
  34. [34]C. L. Cortes and S. K. Gray, Quantum krylov subspace algorithms for ground- and excited-state energy estimation, Phys. Rev. A 105, 022417 (2022).DOI
  35. [35]N. H. Stair, R. Huang, and F. A. Evangelista, A multireference quantum krylov algorithm for strongly correlated electrons, Journal of Chemical Theory and Computation 16, 2236 (2020), pMID: 32091895, https://doi.org/10.1021/acs.jctc.9b01125.
  36. [36]M. Motta, C. Sun, A. T. Tan, M. J. O’Rourke, E. Ye, A. J. Minnich, F. G. Brandao, and G. K.-L. Chan, Determining eigenstates and thermal states on a quantum computer using quantum imaginary time evolution, Nature Physics 16, 205 (2020).DOI
  37. [37]K. Yeter-Aydeniz, R. C. Pooser, and G. Siopsis, Practical quantum computation of chemical and nuclear energy levels using quantum imaginary time evolution and Lanczos algorithms, npj Quantum Inf. 6, 63 (2020), arXiv:1912.06226 [quant-ph].
  38. [38]S. Lloyd, Universal quantum simulators, Science 273, 1073 (1996).
  39. [39]D. S. Abrams and S. Lloyd, Simulation of many-body fermi systems on a universal quantum computer, Phys. Rev. Lett. 79, 2586 (1997).DOI
  40. [40]D. W. Berry, A. M. Childs, R. Cleve, R. Kothari, and R. D. Somma, Simulating hamiltonian dynamics with a truncated taylor series, Phys. Rev. Lett. 114, 090502 (2015).pubmed.ncbi.nlm.nih.gov/25793789
  41. [41]M. Kieferová, A. Scherer, and D. W. Berry, Simulating the dynamics of time-dependent hamiltonians with a truncated dyson series, Phys. Rev. A 99, 042314 (2019).DOI
  42. [42]G. H. Low and I. L. Chuang, Hamiltonian simulation by qubitization, Quantum 3, 163 (2019).
  43. [43]J. Watkins, N. Wiebe, A. Roggero, and D. Lee, Time-dependent hamiltonian simulation using discrete-clock constructions, PRX Quantum 5, 040316 (2024).arxiv.org/abs/2203.11353
  44. [44]E. Campbell, Random compiler for fast hamiltonian simulation, Phys. Rev. Lett. 123, 070503 (2019).DOI
  45. [45]D. W. Berry, A. M. Childs, Y. Su, X. Wang, and N. Wiebe, Time-dependent hamiltonian simulation with 1-norm scaling, Quantum 4, 254 (2020). D. Fang, D. Liu, and R. Sarkar, Time-dependent hamiltonian simulation via magnus expansion: Algorithm and superconvergence, Communications in Mathematical Physics 406, 10.1007/s00220-025-05314-5 (2025).
  46. [47]D. Fang, D. Liu, and S. Zhu, High-order magnus expansion for hamiltonian simulation (2025), arXiv:2509.06054 [quant-ph].DOI
  47. [48]R. Weiss, A. Baroni, J. Carlson, and I. Stetcu, Solving reaction dynamics with quantum computing algorithms, Physical Review C 111, 10.1103/vs78-kwgz (2025).DOI
  48. [49]E. Cruz, D. S. Wild, M. C. Bañuls, and J. I. Cirac, Quantum simulation of dynamical response functions of equilibrium states, Phys. Rev. A 112, 032610 (2025).arxiv.org/abs/2505.05411
  49. [50]E. Kökcü, H. A. Labib, J. K. Freericks, and A. F. Kemper, A linear response framework for quantum simulation of bosonic and fermionic correlation functions, Nature Commun. 15, 3881 (2024), arXiv:2302.10219 [quant-ph].
  50. [51]A. Baroni, J. Carlson, R. Gupta, A. C. Y. Li, G. N. Perdue, and A. Roggero, Nuclear two point correlation functions on a quantum computer, Phys. Rev. D 105, 074503 (2022).
  51. [52]P. Rall, Quantum algorithms for estimating physical quantities using block encodings, Phys. Rev. A 102, 022408 (2020).
  52. [53]A. Roggero, Spectral-density estimation with the gaussian integral transform, Phys. Rev. A 102, 022409 (2020).DOI
  53. [54]A. Roggero and J. Carlson, Dynamic linear response quantum algorithm, Phys. Rev. C 100, 034610 (2019), arXiv:1804.01505 [quant-ph].
  54. [55]V. Efros, Response functions from integral transforms with a lorentz kernel, Physics Letters B 338, 130–133 (1994).
  55. [56]V. D. Efros, W. Leidemann, G. Orlandini, and N. Barnea, The lorentz integral transform (lit) method and its applications to perturbation-induced reactions, Journal of Physics G: Nuclear and Particle Physics 34, R459 (2007).
  56. [57]I. Fox and I. Parker, Chebyshev Polynomials in Numerical Analysis, Oxford mathematical handbooks (Oxford U.P., 1968).
  57. [58]J. Boyd, Chebyshev and Fourier Spectral Methods: Second Revised Edition, Dover Books on Mathematics (Dover Publications, 2013).
  58. [59]W. Du, Y. Yang, Z. Liu, C. Yang, and J. P. Vary, Ab initio many-fermion structure calculations on a quantum computer, (2025), arXiv:2505.19906 [nucl-th].
  59. [60]A. M. Childs, Universal computation by quantum walk, Phys. Rev. Lett. 102, 180501 (2009).
  60. [61]A. M. Childs, On the relationship between continuous- and discrete-time quantum walk, Communications in Mathematical Physics 294, 581–603 (2009).
  61. [62]D. W. Berry and A. M. Childs, Black-box hamiltonian simulation and unitary implementation, Quantum Information and Computation 12, 29 (2012).
  62. [63]A. M. Childs, R. Kothari, and R. D. Somma, Quantum algorithm for systems of linear equations with exponentially improved dependence on precision, SIAM Journal on Computing 46, 1920–1950 (2017).
  63. [64]P. Jordan and E. Wigner, über das paulische äquivalenzverbot, Z. Physik 47 (1928).
  64. [65]M. A. Nielsen, The fermionic canonical commutation relations and the jordan-wigner transform (2005).
  65. [66]S. B. Bravyi and A. Y. Kitaev, Fermionic quantum computation, Annals of Physics 298, 210–226 (2002).DOI
  66. [67]J. T. Seeley, M. J. Richard, and P. J. Love, The bravyi-kitaev transformation for quantum computation of electronic structure, The Journal of Chemical Physics 137, 10.1063/1.4768229 (2012).
  67. [68]A. M. Childs and N. Wiebe, Hamiltonian simulation using linear combinations of unitary operations, Quantum Inf. Comput. 12, 901 (2012).
  68. [69]R. Babbush, D. W. Berry, I. D. Kivlichan, A. Y. Wei, P. J. Love, and A. Aspuru-Guzik, Exponentially more precise quantum simulation of fermions in second quantization, New Journal of Physics 18, 033032 (2016).
  69. [70]G. H. Low and I. L. Chuang, Optimal hamiltonian simulation by quantum signal processing, Phys. Rev. Lett. 118, 010501 (2017).
  70. [71]A. Gilyén, Y. Su, G. H. Low, and N. Wiebe, Quantum singular value transformation and beyond: exponential improvements for quantum matrix arithmetics, in Proceedings of the 51st Annual ACM SIGACT Symposium on Theory of Computing (2019) pp. 193–204.
  71. [72]I. J. Shin, N. A. Smirnova, A. M. Shirokov, Z. Yang, B. R. Barrett, Z. Li, Y. Kim, P. Maris, and J. P. Vary, Improving the sd-shell effective interaction obtained from the Daejeon16 nucleon-nucleon interaction, Phys. Rev. C 110, 034306 (2024).
  72. [73]E. Epelbaum, H.-W. Hammer, and U.-G. Meißner, Modern Theory of Nuclear Forces, Rev. Mod. Phys. 81, 1773 (2009), arXiv:0811.1338 [nucl-th].DOI
  73. [74]E. Epelbaum, H. Krebs, and U. G. Meißner, Improved chiral nucleon-nucleon potential up to next-to-next-to-leading order, Eur. Phys. J. A 51, 53 (2015), arXiv:1412.0142 [nucl-th].
  74. [75]E. Epelbaum, H. Krebs, and U. G. Meißner, Precision nucleon-nucleon potential at fifth order in the chiral expansion, Phys. Rev. Lett. 115, 122301 (2015), arXiv:1412.4623 [nucl-th].
  75. [76]J. P. Vary, C. Mondal, S. Xu, X. Zhao, and Y. Li, Nucleon Structure from Basis Light-Front Quantization : Status and Prospects 10.1140/epjs/s11734-025-02084-y (2025), arXiv:2512.08283 [hep-ph].
  76. [77]H. Honkanen, P. Maris, J. P. Vary, and S. J. Brodsky, Electron in a transverse harmonic cavity, Phys. Rev. Lett. 106, 061603 (2011), arXiv:1008.0068 [hep-ph].DOI
  77. [78]J. P. Vary, H. Honkanen, J. Li, P. Maris, S. J. Brodsky, A. Harindranath, G. F. de Teramond, P. Sternberg, E. G. Ng, and C. Yang, Hamiltonian light-front field theory in a basis function approach, Phys. Rev. C 81, 035205 (2010), arXiv:0905.1411 [nucl-th].
  78. [79]W. Du and J. P. Vary, Systematic input scheme for many-boson Hamiltonians with applications to the two-dimensional φ4 theory, Phys. Rev. D 111, 016013 (2025), arXiv:2407.13672 [quant-ph].
  79. [80]J. E. Sobczyk and A. Roggero, Spectral density reconstruction with chebyshev polynomials, Phys. Rev. E 105, 055310 (2022).
  80. [81]X. Zhang, A non-Hermitian quantum mechanics approach for extracting and emulating continuum physics based on bound-state-like calculations, (2024), arXiv:2408.03309 [nucl-th].
  81. [82]X. Zhang, A non-Hermitian quantum mechanics approach for extracting and emulating continuum physics based on bound-state-like calculations: technical details, (2024), arXiv:2411.06712 [nucl-th].
  82. [83]G. Arfken, G. Arfken, H. Weber, and F. Harris, Mathematical Methods for Physicists: A Comprehensive Guide (Elsevier Science, 2013).
  83. [84]C. W. Clenshaw and A. R. Curtis, A method for numerical integration on an automatic computer, Numer. Math. 2, 197–205 (1960).DOI
  84. [85]A. Weibe, G. Wellein, A. Alvermann, and H. Fehske, The kernel polynomial method, Rev. Mod. Phys. 78, 275 (2006).
  85. [86]M. Nielsen and I. Chuang, Quantum Computation and Quantum Information: 10th Anniversary Edition (Cambridge University Press, 2010).
  86. [87]T. Helgaker, P. Jorgensen, and J. Olsen, Molecular Electronic-Structure Theory (Wiley, 2014).
  87. [88]L. Lin, Lecture notes on quantum algorithms for scientific computation (2022), arXiv:2201.08309 [quant-ph].arxiv.org/abs/2201.08309
  88. [89]Z. Liu, W. Du, Y. Yang, and J. P. Vary (2025), manuscript in preparation.
  89. [90]National nuclear data center, http://www.nndc.bnl.gov/ensarchivals/, accessed on 2024-01-23.
  90. [91]J. Suhonen, From Nucleons to Nucleus: Concepts of Microscopic Nuclear Theory, Theoretical and Mathematical Physics (Springer Berlin Heidelberg, 2007).DOI
  91. [92]P. Navratil, J. P. Vary, and B. R. Barrett, Properties of C-12 in the ab initio nuclear shell model, Phys. Rev. Lett. 84, 5728 (2000), arXiv:nucl-th/0004058.
  92. [93]P. Navratil, J. P. Vary, and B. R. Barrett, Large basis ab initio no-core shell model and its application to C-12, Phys. Rev. C 62, 054311 (2000).DOI
  93. [94]P. Wiecki, Y. Li, X. Zhao, P. Maris, and J. P. Vary, Basis Light-Front Quantization Approach to Positronium, Phys. Rev. D 91, 105009 (2015), arXiv:1404.6234 [nucl-th].DOI
  94. [95]Y. Li, P. Maris, X. Zhao, and J. P. Vary, Heavy Quarkonium in a Holographic Basis, Phys. Lett. B 758, 118 (2016), arXiv:1509.07212 [hep-ph].DOI
  95. [96]S. Jia and J. P. Vary, Basis light front quantization for the charged light mesons with color singlet Nambu–Jona-Lasinio interactions, Phys. Rev. C 99, 035206 (2019), arXiv:1811.08512 [nucl-th].DOI
  96. [97]W. Du, Y. Li, X. Zhao, G. A. Miller, and J. P. Vary, Basis Light-Front Quantization for a Chiral Nucleon-Pion Lagrangian, Phys. Rev. C 101, 035202 (2020), arXiv:1911.10762 [nucl-th].DOI
  97. [98]J. Lan, C. Mondal, S. Jia, X. Zhao, and J. P. Vary, Parton Distribution Functions from a Light Front Hamiltonian and QCD Evolution for Light Mesons, Phys. Rev. Lett. 122, 172001 (2019), arXiv:1901.11430 [nucl-th].DOI
  98. [99]W. Qian, S. Jia, Y. Li, and J. P. Vary, Light mesons within the basis light-front quantization framework, Phys. Rev. C 102, 055207 (2020), arXiv:2005.13806 [nucl-th].DOI
  99. [100]Qiskit contributors, Qiskit: An open-source framework for quantum computing (2023).
  100. [101]L. Lin and Y. Tong, Near-optimal ground state preparation, Quantum 4, 372 (2020).
  101. [102]Y. Dong, L. Lin, and Y. Tong, Ground-state preparation and energy estimation on early fault-tolerant quantum computers via quantum eigenvalue transformation of unitary matrices, PRX Quantum 3, 040305 (2022).DOI
  102. [103]J. Biamonte, P. Wittek, N. Pancotti, P. Rebentrost, N. Wiebe, and S. Lloyd, Quantum machine learning, Nature 549, 195–202 (2017).DOI
  103. [104]Y. Wang and J. Liu, A comprehensive review of quantum machine learning: from nisq to fault tolerance, Reports on Progress in Physics 87, 116402 (2024).DOI
  104. [105]J. Preskill, Quantum Computing in the NISQ era and beyond, Quantum 2, 79 (2018).DOI

Paper details

vlnc:W_at6ydv7g
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents