betaFeedback

WorksPhysics and Astronomy

Coexistence of near-EF van Hove singularity and in-gap topological Dirac surface states in superconducting electrides

Abstract

Superconducting electrides have attracted growing attention for their potential to achieve high superconducting transition temperatures (TC) under pressure. However, many known electrides are chemically reactive and unstable, making high-quality single-crystal growth, characterization, and measurements difficult, and most do not exhibit superconductivity at ambient pressure. In contrast, La3In stands out for its ambient-pressure superconductivity (TC ~ 9.4 K) and the availability of high-quality single crystals. Here, we investigate its low-energy electronic structure using angle-resolved photoemission spectroscopy and first-principles calculations. The bands near the Fermi energy are mainly derived from La 5d and In 5p orbitals. A saddle point is directly observed at the Brillouin zone (BZ) boundary, while a three-dimensional van Hove singularity crosses EF at the BZ corner. First-principles calculations further reveal topological Dirac surface states within the bulk energy gap above EF. The coexistence of a high density of states and in-gap topological surface states near EF suggests that La3In offers a promising platform for tuning superconductivity and exploring possible topological superconducting phases through doping or external pressure.

Electrides are a unique class of materials in which electrons occupy spatially confined interstitial sites and act as anions. Unlike conventional anionic species, these interstitial electrons are not externally introduced but instead originate from the intrinsic electronic redistribution of the constituent atoms. Depending on the crystal structure and bonding environment, these electrons can form either localized or itinerant interstitial states [1, 2, 3]. Owing to their loose binding and spatial confinement, electrides exhibit a wide range of exotic physical and chemical properties, including low work function, high electron mobility, catalytic activity, and nonlinear optical responses [4, 5, 6]. More recently, electrides have attracted renewed attention for their potential to host superconductivity, especially under high pressure, where several compounds exhibit remarkably high superconducting transition temperatures (TCT_C) [7, 8, 9].

While many electrides are chemically reactive and unstable—making high-quality single-crystal growth challenging—the La3XLa_3X (XX = Al, Ga, In, Tl, Sn, etc.) family crystallizing in the cubic Cu3_3Au type, is notable for producing high-quality single crystals and exhibits superconductivity at ambient pressure [10, 11]. Within this series, La3InLa_3In shows the highest TC∼9.4T_C \sim9.4 K—significantly exceeding that of elemental lanthanum [12, 13, 14, 15]. Previous studies have suggested that strong electron–phonon coupling may play a dominant role in this enhancement [16]. The availability of well-ordered single crystals facilitates angle-resolved photoemission spectroscopy (ARPES) measurements of the detailed electronic structure, including high density of states (DOS) features such as van Hove singularities (VHSs) and saddle points (SPs)—both known to enhance many-body interactions and often linked to unconventional superconductivity and correlated phenomena [17, 18]. In La3InLa_3In, the coexistence of a VHS and the states from interstitial anionic electrons (IAEs) at the Fermi energy (EFE_F) may act synergistically to elevate TCT_C and potentially induce strange-metal behavior [16]. Furthermore, the possible coexistence of topological surface states with superconductivity offers a promising platform for realizing topological superconductivity and exotic quasiparticles such as Majorana modes [19, 20, 21, 22, 23, 24]. These unique characteristics underscore the importance of a comprehensive investigation of the electronic structure and surface states in this system.

In this work, we explore the low-energy electronic structure of single-crystalline La3InLa_3In using ARPES in combination with first-principles calculations. We identify a three-dimensional (3D) VHS at the Brillouin zone (BZ) corner that crosses EFE_F, as well as a SP located at the BZ boundary. Moreover, our calculations reveal the presence of topological Dirac surface states residing above EFE_F within a bulk energy gap. These findings establish La3InLa_3In as a compelling platform for investigating the interplay among electron correlations, topological surface states, and superconductivity.

High-quality single crystals of La3InLa_3In were synthesized by the self-flux method as described elsewhere[16]. ARPES measurements were conducted at the 03U and Dreamline beamlines of the Shanghai Synchrotron Radiation Facility (SSRF). The energy and angular resolutions were better than 15 meV and 0.2°, respectively. Samples smaller than 1×11 \times1 mm2^2 were 񟿿 cleaved in situ, yielding flat mirror-like (001) surfaces. During the measurements, the temperature was maintained at approximately 10 K, and the pressure was kept below 6.5×10−116.5 \times10^{-11} Torr. The electronic structure calculations for La3InLa_3In were performed within the framework of density functional theory (DFT) using the projector augmented-wave (PAW) method [25, 26], as implemented in the Vienna ab initio Simulation Package (VASP) [27, 28, 29]. The exchange-correlation energy was treated using the generalized gradient approximation (GGA) in the Perdew-Burke-Ernzerhof (PBE) formulation [30]. A plane-wave energy cutoff of 520 eV was used throughout all calculations. The BZ was sampled using a 16×16×1616 \times16 \times16 Monkhorst-Pack kk-point mesh. Both the lattice parameters and internal atomic coordinates were fully relaxed until the forces on each atom were less than 0.01 eV/Å and the total energy change was below 10−510^{-5} eV. After obtaining the optimized crystal structure, spin-orbit coupling (SOC) was included in the self-consistent electronic structure calculations. The surface states projected onto the two-dimensional (2D) BZ were computed using the WannierTools package [31], based on maximally localized Wannier functions constructed from the VASP outputs.

The crystal structure of La3InLa_3In with space group Pm3‾mPm\overline{3}m (No. 221) is depicted in Figure 1(a). It can be described as a simple cubic lattice in which In atoms occupy the cube corners, while La atoms reside at the face centers, yielding a 3:1 stoichiometry (Cu3_3Au type). Remarkably, replacing all In atoms with La yields elemental face-centered cubic Lanthanum, which is superconducting with TC∼5.5T_\mathrm{C} \sim5.5 K [15]. The cubic BZ and its high-symmetry paths, including Γ\Gamma–XX–MM–Γ\Gamma–RR–XX and MM–RR, are illustrated in Figure 1(b) with indigo solid lines. To facilitate comparison with photon-energy-dependent ARPES measurements, high-symmetry points ZZ and AA on the kxk_x–π\pi plane are also marked, contrasting with Γ\Gamma and XX on the kz∼0k_z \sim0 plane. In Figure 1(c), ARPES intensity plots along XX–Γ\Gamma–XX are compared with calculated bands, revealing a SP at XX located ∼−0.5\sim-0.5 eV below EFE_\mathrm{F} and a VHS at MM located exactly at EFE_\mathrm{F}. Due to matrix-element effects, the hole-like band forming the SP at XX shows asymmetric intensity along the two XX–Γ\Gamma branches; the left branch more clearly displays the hole-like dispersion, so both XX points are shown here for clarity. Figure 1(d) presents the core-level photoemission spectrum, revealing sharp La 4d4d, 5s5s, 5p5p, 5d5d and In 5s5s, 5p5p peaks, indicating the excellent sample quality.

Crystal structure, Brillouin zones, photoemission spectra, ARPES intensity map, and calculated orbital-projected band structure and DOS of La3In

Figure 1. (a) Crystal structure of La3InLa_3In. (b) Bulk BZ and projected 2D BZ of the (001) surface. The indigo lines indicate the high-symmetry paths in the BZ. (c) Intensity plot along the Γ\Gamma–XX–MM direction, overlaid with calculated bands (without renormalization or energy shift), showing the VHS at MM and the SP at XX. The black dashed ellipses indicate the SP and VHS. (d) Core-level photoemission spectrum displaying pronounced La and In peaks. Inset: Two La 4d4d peaks located about −105-105 eV below EFE_\mathrm{F}. (e) ARPES intensity map along the Γ‾\overline{\Gamma}–M‾\overline{M} direction, revealing the low-energy electronic structure; the dominant orbital contributions are indicated on the right. (f) Calculated orbital-projected band structure and DOS without SOC, where different colors denote distinct orbital characters.

The measured and calculated electronic structures over a wide binding-energy range are shown in Figure 1(e) and Figure 1(f), respectively. The orbital-projected band structure and DOS from first-principles calculations [Fig. 1(f)] are in good agreement with the experimental results [Fig. 1(e)] for the intrinsic La–In states, accurately reproducing the dispersions near EFE_F derived from La 5dd and In 5pp orbitals. As indicated by the black dashed ellipses in Figure 1(f), VHS and SP are predicted at the MM and XX points, respectively, contributing substantially to the DOS near EFE_F. Additionally, a flat band with weak intensity observed around −3.3-3.3 eV below EFE_F in Figure 1(e) is attributed to oxygen-derived states, consistent with oxygen atoms preferentially occupying IAEs sites in electrides [32]. Since oxygen is not included in the calculations, this feature is absent in Figure 1(f). The localized interstitial states are likely formed through hybridization between nearby-energy orbitals of the intrinsic lattice atoms, leading to their distinct separation from the intrinsic La–In bands.

We performed photon-energy-dependent ARPES measurements to map the 3D low-energy band structure, as summarized in Figure 2. Figure 2(a) displays the ARPES intensity at EFE_F as a function of photon energy and inplane momentum k∥k_{\parallel} along the Γ\Gamma–MM (ZZ–RR) direction. The α/β\alpha/\beta band, as well as the dispersion along MM–RR, exhibits a pronounced periodic modulation with photon energy in the range of 65–148 eV. Using an empirical inner potential of 13 eV and c=5.078c = 5.078 Å, and applying the free-electron final-state model [33, 34], we determine that hν=80h\nu= 80 and 140 eV correspond approximately to the Γ\Gamma plane, whereas hν=108h\nu= 108 eV is close to the ZZ plane.

Integrated intensity maps and band structures

Figure 2. (a) Integrated intensity map (±10\pm10 meV) on the k∥k_{\parallel}-kzk_z plane at EFE_F. High-symmetry points and the kzk_z-dispersive bands are indicated. (b) Integrated intensity map at EF±10E_F \pm10 meV taken on kz∼0k_z \sim0 plane. The red frames denote the 2D BZ projected onto the (001) surface, with high-symmetry points labeled. For guidance, parts of three Fermi surfaces (FSs) are outlined with red open circles. The γ\gamma FS forms a hot spot at the BZ corner on the kz∼0k_z \sim0 plane. (c) Same as (d), but taken on the kz∼πk_z \sim\pi plane. The γ\gamma FS is larger than that in panel (b), exhibiting a pronounced three-dimensional character. (d) Intensity plot and corresponding second-derivative plot along Γ\Gamma–MM on the kz∼0k_z \sim0 plane, overlaid with the calculated bands. The Surface states (SS), SS1 and SS2, are indicated in the second-derivative plot. The solid arrows indicate the well-resolved surface states, while the dashed arrows mark where the corresponding surface states become mixed with the kzk_z-dispersive bulk states. (e) Same as (d), but along ZZ–RR on the kz∼πk_z \sim\pi plane.

Figure 2(b) and Figure 2(c) show the Fermi surfaces (FSs) measured near the kz∼0k_z \sim0 and kz∼πk_z \sim\pi planes, respectively, revealing three sheets labeled α\alpha, β\beta, and γ\gamma. For clarity, the FS contours are marked by red open circles. Along the Γ\Gamma–MM direction, the α\alpha and β\beta FSs remain difficult to distinguish across a wide photon-energy range due to the combined effects of finite resolution and kzk_z broadening. In contrast, the γ\gamma FS forms an intense spot-like feature on the kz∼0k_z \sim0 plane and becomes significantly larger on the kz∼πk_z \sim\pi plane, demonstrating its pronounced 3D character. This behavior is further reflected in the energy-momentum dispersions along high-symmetry directions shown in Figure 2(d) and Figure 2(e). These data indicate that the α/β\alpha/\beta FSs originate from electron-like bands near Γ\Gamma and ZZ, whereas the γ\gamma FS is derived from hole-like bands near MM and RR. The VHS at EFE_F arises from the top of the γ\gamma band at MM, but shifts above EFE_F at RR, showing that this band crosses the Fermi level along the MM–RR direction. Such evolution is consistent with the strong kzk_z dispersion of the high-DOS states along MM–RR in Figure 2(a).

When comparing the experimental dispersions with the calculated bands overlaid on the second-derivative spectra, we find excellent agreement on the kz∼0k_z \sim0 plane. However, the calculated bands appear more intricate near EFE_{\mathrm{F}} on the kz∼πk_z \sim\pi plane, likely due to band entanglement originating from correlation effects and interband interactions, leading to certain discrepancies from the experimental data. Additionally, two extra features labeled SS1 and SS2 in Figure 2(d) and Figure 2(e) correspond to surface states, as confirmed by comparison with the calculated results in Figure 4. The observed surface states contain contributions from both calculated modes: SS1 (associated with the La(2) termination) is clearly visible near the kz∼0k_z \sim0 plane but merges with bulk states near kz∼πk_z \sim\pi, whereas SS2 shows the opposite trend. These behaviors indicate that the measurements involve a mixture of the two terminations and that the bulk states are interwoven with these surface states.

Projected band structures for the La(2)- and LaIn-terminated (001) surfaces

Figure 4. Projected band structures for the La(2)- and LaIn-terminated (001) surfaces along the high-symmetry directions. The SS1 and SS2 correspond to observed surface states in Figure 2. The Dirac SS3 and SS4 are highlighted and zoomed in.

Figure 3(a) compares the electronic structures calculated with and without SOC. Since La3_3In preserves both inversion and time-reversal symmetries, Kramers degeneracy ensures that all bands remain doubly degenerate. As a result, SOC does not induce significant band splittings near the EFE_{\mathrm{F}}, apart from small symmetry-allowed gaps at band crossings. Moreover, according to the Bohr model, the strength of SOC is proportional to the fourth power of the atomic number and inversely proportional to the azimuthal quantum number ll (except for l=0l = 0) [35]. In the present case, the low-energy states are mainly derived from In-5pp and La-5dd orbitals (Figure 1(f)). The 5pp orbitals of In primarily contribute regions exhibiting larger SOC-induced band splittings, while those with smaller splittings originate mainly from the 5dd orbitals of La. Although La has a larger atomic number than In, the dd orbitals (l=2l = 2) possess a higher azimuthal quantum number than the pp orbitals (l=1l = 1). Consequently, under the combined effect of these factors, the SOC-induced band splitting is more pronounced in the In-dominated bands than in the La-dominated bands.

As shown in Figure 3(b), once the SOC is taken into account, the band crossings between the 48th and 50th bands around the MM point are fully gapped, yielding a continuous gap throughout the entire BZ. This is because the bands of La3_3In along the XX–MM, MM–Γ\Gamma, and XX–RR directions possess C2vC_{2v} double point group symmetry, which cannot protect the band crossings along those high-symmetry paths [36]. In this sense, superconducting La3_3In can be regarded as an insulator defined at a curved Fermi level between the 48th band (blue) and the 50th band (orange). Owing to the coexistence of time-reversal and inversion symmetries, its topological invariant Z2Z_2 can be determined from the product of the parity eigenvalues of all occupied bands at the eight TRIM points [37], namely, Γ\Gamma, three XX, RR, and three MM points [Fig. 1(b)]. As listed in the table, the resulting Z2=1Z_2 = 1, confirming the nontrivial topological character of La3_3In.

Calculated and labeled electronic bands with and without SOC, with parity products of occupied states at the TRIM points

Figure 3. (a) Calculated bands with SOC (red) overlaid with those without SOC (black). (b) The labeled calculated bands with SOC near EFE_{\mathrm{F}} distinguished by different colors. Parity products of the occupied states at the TRIM points are shown in the right table.

Besides the Z2Z_2 topological invariant, the nontrivial topology of La3_3In is directly manifested in its surface states. We calculated the (001) surface spectrum, considering both La(2) and LaIn terminations, as shown in Figure 4. The SS1 and SS2 are experimentally observed as mentioned above. The robust Dirac surface states SS3 and SS4, protected by time-reversal symmetry, appear clearly within the bulk gap, confirming their topological origin. Specifically, SS3 corresponds to the La(2) termination, where an in-gap Dirac cone emerges at the MM point about 0.30 eV above EFE_{\mathrm{F}}, while SS4 corresponds to the LaIn termination, with the Dirac cone located near 0.55 eV above EFE_{\mathrm{F}}. These states are well disentangled from bulk bands, reflecting their symmetry-protected and termination-resilient nature, and the different energy positions highlight surface-dependent tunability. Notably, the Dirac states at MM lie close to a 3D VHS with a high DOS. Given that La3_3In is a conventional BCS superconductor, shifting the chemical potential via doping, gating, or strain could change electronic correlations and drive interesting quantum phase transitions. In concert with the nontrivial surface states, such tuning may also provide a pathway to topological superconductivity.

In summary, we have investigated the low-energy electronic structure of the superconducting electride La3_3In by high-resolution ARPES and first-principles calculations. We identified La-5dd and In-5pp dominated high-DOS states near EFE_{\mathrm{F}}, including a saddle point at −0.5 eV and a 3D VHS crossing EFE_{\mathrm{F}}, which likely enhances correlations and the superconducting transition temperature. Parity analysis at the TRIM points yields a nonzero Z2Z_2 invariant, confirming nontrivial topology. The resulting Dirac surface states are symmetry-protected, robust, and well disentangled from bulk bands, with slightly different energies for La(2) and LaIn terminations, enabling surface-dependent tunability. These clean in-gap modes provide a promising platform for exotic transport and device applications. Our findings establish La3_3In as a rare system in which superconductivity, a 3D VHS, and topological surface states coexist, offering unique opportunities to explore the interplay among topology, strong correlations, and superconductivity in electride materials.

This work was supported by the National Natural Science Foundation of China (NSFC, Grants No. 12222413, 12174443, 12274459, and 12404266), the National Key R&D Program of China (Grants No. 2023YFA1406500 and 2022YFA1403800), the Natural Science Foundation of Shanghai (Grants No. 23ZR1482200), the Natural Science Foundation of Ningbo (Grants No. 2024J019), the Science Research Project of Hebei Education Department (Grant No. BJ2025060), the funding of Ningbo Yongjiang Talent Program and the Mechanics Interdisciplinary Fund for Outstanding Young Scholars of Ningbo University (Grants No. LJ2024043). We thank the SSRF for BL03U (31124.02.SSRF.BL03U) for the assistance with ARPES measurements. Computational resources were provided by the Physical Laboratory of High-Performance Computing at Renmin University of China and the Beijing Super Cloud Computing Center.

References

  1. [1]Dye J L 1990 Science 247 663
  2. [2]Dye J L 2003 Science 301 607
  3. [3]Liu P Y, Zhuang Q, Xu Q, Cui T and Liu Z 2025 Sci. Adv. 11 eadt9411
  4. [4]Lee K, Kim S W, Toda Y, Matsuishi S and Hosono H 2013 Nature 494 336
  5. [5]Kitano M, Inoue Y, Yamazaki Y, Hayashi F, Kanbara S, Matsuishi S, Yokoyama T, Kim S W, Hara M and Hosono H 2012 Nat. Chem. 4 934
  6. [6]Toda Y, Yanagi H, Ikenaga E, Kim J J, Kobata M, Ueda S, Kamiya T, Hirano M, Kobayashi K and Hosono H 2007 Adv. Mater. 19 3564
  7. [7]Acharya S, Pashov D and Schilfgaarde M 2022 Phys. Rev. B 105 144507
  8. [8]Wan Z Y, Zhang C, Yang T Y, Xu W J and Zhang R Q 2022 New J. Phys. 24 113012
  9. [9]Zhang X H, Yao Y S, Ding S C, Bergara A, Li F, Liu Y, Zhou X F and Yang G C 2023 Phys. Rev. B 107 L100501
  10. [10]Garde C S, Ray J and Chandra G 1993 J. Alloys Compd. 198 165
  11. [11]Smith T F and Luo H L 1967 J. Phys. Chem. Solids 28 569
  12. [12]Gschneidner K A, McMasters O D and Ostenson J E 1978 J. Less-Common Met. 62 167
  13. [13]Heiniger F, Bucher E, Maita J P and Descouts P 1973 Phys. Rev. B 8 3194
  14. [14]Ravindran P and Asokamani R 1995 J. Phys.: Condens. Matter 7 5567
  15. [15]Ziegler W T, Young R A and Floyd A L 1953 J. Am. Chem. Soc. 75 1215
  16. [16]Tu Z J, Sun P H, Ma P C, Zhen H R, Tian S J, Wang S G, Cui T, Liu Z H, Liu K and Lei H C 2024 arXiv:2410.10443 unpublishedarxiv.org/abs/2410.10443
  17. [17]Markiewicz R S 1997 J. Phys. Chem. Solids 58 1179
  18. [18]Markiewicz R S 1991 Int. J. Mod. Phys. B 05 2037
  19. [19]Sato M and Ando Y 2017 Rep. Prog. Phys. 80 076501
  20. [20]Ando Y and Fu L 2015 Annu. Rev. Condens. Matter Phys. 6 361
  21. [21]Fu L and Kane C L 2008 Phys. Rev. Lett. 100 096407
  22. [22]Zhang P, Yaji K, Hashimoto T, Ota Y, Kondo T, Okazaki K, Wang Z J, Wen J S, Gu G D, Ding H and Shin S 2018 Science 360 182
  23. [23]Wang D, Kong L Y, Fan P, Chen H, Zhu S Y, Liu W Y, Cao L, Sun Y J, Du S X, Schneeloch J, Zhong R D, Gu G, Fu L, Ding H and Gao H J 2018 Science 362 333
  24. [24]Liu Q, Chen C, Zhang T, Peng R, Yan Y J, Wen C H P, Lou X, Huang Y L, Tian J P, Dong X L, Wang G W, Bao W C, Wang Q H, Yin Z P, Zhao X and Feng D L 2018 Phys. Rev. X 8 041056
  25. [25]Blöchl P E 1994 Phys. Rev. B 50 17953
  26. [26]Kresse G and Joubert D 1999 Phys. Rev. B 59 1758
  27. [27]Kresse G and Hafner J 1993 Phys. Rev. B 47 558
  28. [28]Kresse G and Furthmüller J 1996 Comput. Mater. Sci. 6 15
  29. [29]Kresse G and Furthmüller J 1996 Phys. Rev. B 54 11169
  30. [30]Perdew J P, Burke K and Ernzerhof M 1996 Phys. Rev. Lett. 77 3865
  31. [31]Wu Q S, Zhang S N, Song H F, Troyer M and Soluyanov A A 2018 Comput. Phys. Commun. 224 405
  32. [32]Yun T G, Heo Y, Bin Bae H and Chung S Y 2021 Nat. Commun. 12 824
  33. [33]Liu Z H, Richard P, Xu N, Xu G, Li Y, Fang X C, Jia L L, Chen G F, Wang D M, He J B, Qian T, Hu J P, Ding H and Wang S C 2012 Phys. Rev. Lett. 109 037003
  34. [34]Liu Z H, Lou R, Guo P J, Wang Q, Sun S S, Li C H, Thirupathaiah S, Fedorov A, Shen D W, Liu K, Lei H C and Wang S C 2018 Phys. Rev. X 8 031044
  35. [35]H Haken, H C Wolf, and Brewer W D 2005 Springer Berlin
  36. [36]Wang Z J, Weng H M, Wu Q S, Dai X and Fang Z 2013 Phys. Rev. B 88 125427
  37. [37]Fu L and Kane C L 2007 Phys. Rev. B 76 045302

Paper details

vlnc:W_avdu3hqw
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 1

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents