WorksMathematics
Extension of surjective isometries between unit spheres of -direct sums
Abstract
We study surjective isometries between the unit spheres of Banach spaces of the form , where is nonzero and strictly convex, , and every unit vector of has at least two distinct unit vectors at distance . For two direct sums , , satisfying these hypotheses, we prove that every surjective isometry between their unit spheres forces equality of the direct-sum exponents and extends uniquely to a surjective real-linear isometry preserving the corresponding components, where . The proof identifies the component unit spheres through diametral sets and distance formulas, and then constructs isometries between the component unit balls. As a principal application, we obtain extension and representation results for absolutely continuous functions equipped with norms combining evaluation at a fixed point and the -norm of the derivative. We also discuss Lipschitz and differentiable function spaces, distinguishing the consequences of our theorem from those already covered by existing extension results. Endpoint conclusions are derived separately, including the Mazur-Ulam property for the real absolutely continuous space with the sum norm.
Introduction
In 1987, Tingley [14] formulated the following problem: if and are Banach spaces and
is a surjective isometry between their unit spheres, does extend to a surjective real-linear isometry from onto ? Here denotes the unit sphere of . Tingley’s problem has received considerable attention, and positive solutions have been obtained for many classical Banach spaces and spaces arising in operator algebra theory. For example, Wang [15] established an extension theorem for scalar-valued continuous-function spaces, and Tan [13] proved that real -spaces have the Mazur–Ulam property. Mori and Ozawa [9] proved the Mazur–Ulam property for unital C*-algebras, meaning that the target space may be arbitrary. Banakh [1] resolved the problem for two-dimensional Banach spaces. Further developments include the Mazur–Ulam property for unital -algebras [11]. We refer to [10] for a survey of developments concerning operator algebras.
Despite these advances, Tingley’s problem remains open in general, including for arbitrary finite-dimensional Banach spaces of dimension at least three. The known positive results therefore continue to motivate the search for geometric hypotheses under which the behavior of a surjective isometry on the unit sphere forces linearity. For direct sums, a basic issue is whether the isometry recognizes the component spaces. Once the component unit spheres have been identified, one can ask whether their images determine isometries between the component unit balls and hence linear extensions.
Direct sums of continuous-function spaces provide an important setting for this approach. Wang and Orihara [17] studied surjective isometries between the unit spheres of -sums of -type spaces. Wang [16] subsequently established extension and representation theorems for -sums of 2020 Mathematics Subject Classification. Primary 46B04; Secondary 46B20, 46E15, 46E40.
Key words and phrases. Tingley’s problem, direct sum, strictly convex space, absolutely continuous function. -type spaces, where . In particular, [16 Theorem 1.8] applies to
where is a nonzero strictly convex Banach space, is a compact Hausdorff space containing at least two points, and is an arbitrary nonzero Banach space. In fact, the first component can be represented as . Thus the freedom to choose an arbitrary strictly convex first component is already present in Wang’s theorem.
The present paper considers a geometric condition (D) on the second component that does not require a specified continuous-function representation. Condition (D) is defined in the next section. We state the main theorem as follows.
Theorem 1.1. For , let be a nonzero strictly convex Banach space, let be a nonzero Banach space satisfying condition (D), and let . Then the following statements are equivalent:
(1) There exists a surjective isometry .
(2) , and there exist surjective real-linear isometries and .
Moreover, for each such , there are unique surjective real-linear isometries and satisfying
The operator is the unique surjective real-linear isometric extension of $\Delta.
We emphasize absolutely continuous and Lipschitz functions. The main theorem gives real-linear extensions for and identifies the outer exponent. Standard representations of the component isometries then yield explicit integral formulas. The endpoint conclusions are obtained separately. Adjoining an atom identifies the real absolutely continuous space at with a real -space, so Tan’s theorem gives the Mazur–Ulam property [13]. For Lipschitz functions, the endpoints follow from continuous-function extension theorems and the -sum theorem of Wang and Orihara [15, 17]. The preceding endpoint conclusions are consistent with the complex-valued Lipschitz results of Hirota and Miura [5] and the related results in [2]. Atom-adjoining identifications also appear in Lin’s work on positive unit spheres [6, 7]; the conclusions here concern real-linear extensions from the full unit spheres.
For completeness, we also discuss scalar- and vector-valued differentiable functions through the identification
For the norms specified below, the displayed identification represents the spaces as direct sums involving . For each fixed exponent , these extension assertions also follow from Wang’s theorem [16 Theorem 1.8]. The same observation applies to the fixed-exponent Lipschitz assertion, since is isometrically a scalar continuous-function space. The function-space applications illustrate the abstract theorem and its representations.
The paper is organized as follows. Section 2 introduces definitions and notation and establishes preliminary results. Section 3 identifies the components and establishes the main theorem. Section 4 develops applications, including the absolutely continuous , Lipschitz , continuous-functions on compact Hausdorff and differentiable functions .
Notation and the diametral hypothesis
Throughout this paper, all Banach spaces are considered as real Banach spaces. When a space is written over , we retain its complex-valued elements and its norm but restrict scalar multiplication to real scalars for this purpose. Unless explicitly qualified as complex-linear or -linear, linearity means real linearity. For a nonzero Banach space , write
For , define its diametral set by
Notice that for every . We give the definition of condition (D).
Definition 2.1. A nonzero Banach space satisfies condition (D) if contains at least two distinct points for every .
Proposition 2.2. If are nonzero Banach spaces, both and satisfy condition (D).
Proof. Let . If , the distinct unit vectors and are both at distance from . If , use and for any . If , use and for any .
For , at least one coordinate has norm one. If , choose distinct . Then and are distinct unit vectors at distance two from . If , argue in the other coordinate. □
Example 2.3. Condition (D) holds for , , and when contains at least two elements: split off one coordinate and apply Proposition 2.2. Condition (D) also holds for when is compact Hausdorff with at least two points and ; see § 4.
Notice that a nonzero strictly convex Banach space does not satisfy (D), since for every . The direct-sum space is endowed with
We use the following standard consequence of Mankiewicz’s theorem.
Theorem 2.4 (Mankiewicz [8]). Let be real normed spaces. Every surjective isometry with is the restriction of a unique surjective real-linear isometry .
In particular, closed unit balls are convex sets with nonempty norm interior. Mankiewicz’s theorem therefore gives an affine isometry of the ambient spaces extending the ball isometry. The range of the affine extension contains the target unit ball; the linear part is consequently onto. Fixing zero makes the affine extension linear. Uniqueness follows because every vector is a positive scalar multiple of a vector in the ball.
Recall that a real normed space is strictly convex if whenever are distinct. Equivalently, for nonzero , equality implies . We use this characterization below. At the end of this section, we recall a well-known fact.
Lemma 2.5. Let be nonzero real or complex normed spaces and let be any map. There is at most one real-linear operator extending . Any such real-linear extension must satisfy
If are complex and this real-linear extension exists, then is complex-linear if and only if for all .
The uniqueness in Lemma 2.5 requires no isometry assumption. Also, this lemma does not assert existence. For complex spaces, identity and conjugation give different maps on the full unit sphere, so they do not contradict uniqueness of the real-linear extension of a fixed map.
The main extension theorem
Lemma 3.1. Let be a nonzero strictly convex Banach space, let satisfy (D), and let , where . Then
For , one has .
Proof. Suppose that and . Put . The triangle inequality gives
We observe that, for , the function is strictly increasing on , since . Consequently, distance two forces , and hence . It also forces with . Strict convexity of implies . That is, , and hence , proving that .
Conversely, let with . By (D), choose distinct with . For , the two distinct points belong to , since
Observe that
Thus, with is not a singleton. Equivalently, being a singleton implies , proving that . Therefore, . □
Lemma 3.1 identifies the first component unit sphere using distances on the unit sphere. We next calculate distances to to identify the second component unit sphere and the direct-sum exponent.
Lemma 3.2. Under the hypotheses of Lemma 3.1, let . Then
If , the unique maximizer in (3) is .
Proof. For , the triangle inequality yields
Consequently, we have equalities (3) and (4). If , equality of is obtained at , and equality of at . Strict convexity of implies that equality is possible only when and are positively collinear, and thus the maximizer is uniquely . If , every distance in question equals . □
Lemma 3.3. For , let be nonzero and strictly convex, let satisfy (D), and let . Set . If is a surjective isometry, then . Moreover,
Proof. Since is a surjective isometry, for every we have . More precisely, preservation of distances gives one inclusion, and surjectivity gives the reverse inclusion. Thus is a singleton if and only if is a singleton. By Lemma 3.1,
and consequently .
For , define
Because preserves distances and maps onto , it also maps onto . We claim that . To see this, let . By Lemma 3.2,
whereas
These maximum and minimum agree if and only if . Therefore, the distance to points of is constant exactly when . Since , implies , proving the claim. It follows that
Finally, choose and , which is possible because both spaces are nonzero. Their images have the form
with and . Preservation of their distance gives
Because is strictly decreasing, we conclude that , completing the proof. □
Proof of Theorem 1.1: Assume that a surjective isometry exists. Lemma 3.3 gives and . We write
where is a surjective isometry. The last assertion of Lemma 3.1 gives
Let , and write . By equality (2), the maximum distance to the first summand sphere determines uniquely. It follows that
If , by Lemma 3.2, the unique maximizer is carried onto the unique maximizer for . Consequently, equalities (5) yield
Together with equality (4), this proves that the first coordinate of is , where
For the same conclusion follows from equalities (5). The definition (6) shows that is a norm-preserving bijection. Its inverse is defined radially from , and the first coordinate of is .
We now extend to the whole space . Take . Fix , and write
By equalities (5), and . Consequently,
Thus is nonexpansive, namely, . Applying precisely this argument to and a fixed unit vector in shows that is nonexpansive. Hence is a surjective isometry between the closed balls. Theorem 2.4 provides a surjective real-linear isometry extending .
We next show that the second coordinate of is determined solely by . Let and write their images as and . Since is an isometry, we have
Therefore . For every , choose of norm . We have thus defined a map such that
Equation (5) implies .
We now extend to the whole space , and conclude the required statement. For choose so that . Equation (7) and the isometry of give
Since is an isometry, the preceding equality yields . For choose such that lies on the target sphere. A preimage under shows that is in the range of . Hence is a surjective ball isometry, and we know that from the previous paragraph. Theorem 2.4 supplies a surjective real-linear isometry extending such that
This proves formula (1).
Conversely, if and are surjective real-linear isometries, as stated, then
showing that is a surjective real-linear isometry. Immediately, is a surjective isometry. Finally, a real-linear extension of a sphere map is determined on each by radial formula (1). Thus, Lemma 2.5 proves all uniqueness claims. □
Remark 3.4. Theorem 1.1 does not assume finite dimensionality, smoothness, or a prior solution of Tingley’s problem for or . Its conclusion is nevertheless a theorem about pairs of spaces with the specified decompositions; it does not assert the Mazur–Ulam property with an arbitrary target Banach space.
Example 3.5. Let be a nonzero strictly convex Banach space and let be arbitrary nonzero Banach spaces. By Proposition 2.2, Theorem 1.1 applies to both
Examples include and , where is a nonzero Hilbert space. No strict convexity is required of or .
Applications to function spaces
We first apply Theorem 1.1 to absolutely continuous functions whose norms combine evaluation at a fixed point with the -norm of the derivative. We then record shorter applications to Lipschitz and differentiable functions, specifying their relation to existing extension theorems.
Throughout this section, denotes a nondegenerate compact interval, , and . All extension assertions concern the underlying real Banach spaces. For , put
Integrals with reversed endpoints are understood as oriented integrals. All -spaces on intervals use the Lebesgue measure.
Absolutely continuous functions
Let denote equipped with
Here combines the two displayed quantities; the derivative belongs to for every . The fundamental theorem for absolutely continuous functions gives the surjective -linear isometry
whose inverse is
In particular, is complete for all .
Lemma 4.1. The spaces and satisfy condition (D).
Proof. Partition into measurable sets of positive measure. Restriction gives
Every component is nonzero, so Proposition 2.2 applies to both decompositions.
Proposition 4.2. Fix . For , let be a nondegenerate compact interval, , and . Then there exists a surjective isometry if and only if and there exist surjective real-linear isometries and . Every such isometry extends uniquely to a surjective real-linear isometry of the form
where and are uniquely determined by .
Proof. The underlying real space of is strictly convex, and the second components in (9) satisfy (D) by Lemma 4.1. Conjugating by the restrictions of the maps to the unit spheres and applying Theorem 1.1 gives and the unique component isometries . Formula (10) then gives (11). Conversely, since and are surjectively real-linearly isometric, the existence assertion follows from Theorem 1.1.
The following representation makes the derivative component in (11) explicit. Put and, for complex scalars, . A measurable bijection modulo null sets means a bimeasurable bijection between full-measure measurable subsets such that both the bijection and its inverse preserve null sets.
Corollary 4.3. Under the hypotheses of Proposition 4.2, every extension has the form
Here is a measurable bijection modulo null sets, and is measurable, positive and finite almost everywhere, with
for every nonnegative measurable function on . Also, , , and and are measurable, where . When , we require , almost everywhere, and .
Proof. By Proposition 4.2, we have
where and are surjective real-linear isometries. Every surjective real-linear isometry of has the form
where , , , and . In the real case, and $\varepsilon_0=0.
We next describe . Regard as a real Banach space, namely or the Euclidean plane . In either case, is separable and strictly convex, and hence cannot be expressed as an -direct sum of two nonzero Banach spaces. Therefore Sourour’s representation theorem [12] applies to . The two intervals may first be identified by an affine bijection, together with the corresponding normalization of the -norm. Sourour’s theorem yields an isomorphism between the underlying measure algebras, a positive measurable weight, and a measurable family of surjective real-linear isometries of .
Since and , equipped with the Lebesgue measure, are standard nonatomic finite measure spaces, the measure-algebra isomorphism can be represented by a measurable bijection modulo null sets [4 344C]. Consequently, there exist a measurable function , finite almost everywhere, and a measurable family of surjective real-linear isometries such that
for every and almost every .
Each is multiplication by a sign when . When , regarded as a real Banach space, every such isometry is either multiplication by a unimodular scalar or multiplication by a unimodular scalar followed by complex conjugation. Thus there exist measurable functions and such that
for almost every . In the real case, almost everywhere and . Hence
It remains to verify equality (13). Let be a nonnegative integrable function on , and choose a fixed with . Applying the preceding representation to , and using the fact that and each are isometries, we obtain
By applying this identity to truncations and using the monotone convergence theorem, the equality extends to every nonnegative measurable function on . This proves equality (13). Finally, substituting the representations of and into formula (11) yields (12), completing the proof. □
Remark 4.4. Proposition 4.2 uses condition (D) of the -component directly. Wang’s [16 Theorem 1.8] is formulated for specified -type components and a common exponent. The applicability of Wang’s theorem to an -component does not follow merely from the identity : the singleton component in that theorem is required to be strictly convex, whereas is not strictly convex. The representation in Corollary 4.3 uses the existing classification of linear -isometries; the extension assertion is supplied by Theorem 1.1.
The following proposition establishes that has the Mazur–Ulam property.
Proposition 4.5. The real Banach space has the Mazur–Ulam property.
Proof. Let and , where is the Lebesgue measure and is the Dirac measure at . The map
is a surjective real-linear isometry onto by formula (10). Since is finite, Tan’s theorem [13] applies. Let be a surjective isometry, where is a real Banach space. Then extends to a surjective real-linear isometry
The operator extends . Uniqueness follows from Lemma 2.5. □
Notice that the endpoint conclusion in Proposition 4.5 is a consequence of the existing extension theorem.
Lipschitz functions
For , define
and denote the resulting space by . Since is a compact interval, . Consequently, the map
is a surjective -linear isometry, with inverse .
Proposition 4.6. Fix . Suppose . Then is surjectively isometric to if and only if . For every common exponent , every surjective isometry extends uniquely to a surjective real-linear isometry of the form
where and are surjective real-linear isometries uniquely determined by .
Proof. For , apply Theorem 1.1 to (14), using Lemma 4.1. Existence for equal exponents follows by taking to be the identity and , where is an increasing affine bijection.
For the endpoints, write using its scalar continuous-function representation. For , apply [17 Theorem 3.5] to , where is the underlying real space of . Neither component is isometric to real : is strictly convex, and the other component is infinite-dimensional. The component representation in [17 Theorems 3.3 and 3.4] therefore applies. The finite-dimensional component must be preserved, giving (15).
For , the spaces identify with . The scalar continuous-function extension results [15, 9] give a real-linear extension. The compact space has no isolated points, since the Lebesgue measure algebra has no atoms. The real Banach–Stone theorem [3] consequently preserves the unique isolated point , again giving (15).
For a common , the extension and component representation above also follow from [16 Theorem 1.8], since . Theorem 1.1 additionally compares possibly different exponents. The endpoint assertions were obtained from the cited theorems. In particular, the complex extension problem with norm was studied by Hirota and Miura [5]; see also [2].
Remark 4.7 (Explicit Lipschitz extensions). By the real Banach–Stone representation of the component and [4 344C], formula (15) can be rewritten as
The symbols have the meanings specified in Corollary 4.3. Every such choice gives a surjective real-linear isometry. In fact, the null-set preservation in both directions implies , and the pointwise scalar isometries and are invertible modulo null sets. The representation (16) contains no density factor, since the derivative norm is the essential supremum norm.
Continuous and differentiable functions
We first verify condition (D) for the continuous-function components needed for the application: every with compact Hausdorff, , and satisfies (D). To verify condition (D), let , choose with , a point , and with , . Writing , the distinct functions
belong to and satisfy .
Let be a nonzero real or complex Banach space and . Equip with
and write for the normed space . Derivatives at endpoints are understood as one-sided derivatives.
Proposition 4.8. For , , the map
is a surjective real-linear isometry from onto . Its inverse is
In particular, is a Banach space.
Proof. For and , define the Bochner integral
The fundamental theorem of calculus gives . For , differentiation under the integral sign gives ; the boundary term vanishes. These identities hold with one-sided derivatives at the endpoints, and for every . Thus the function on the right of (18) belongs to and satisfies
Consequently, and . Hence, is surjective. If , successive applications of
for give , proving injectivity. Linearity is immediate, and the norm (17) gives , including the maximum norm when . Completeness follows from completeness of the two components. □
Corollary 4.9. For , let be nonzero strictly convex Banach spaces, , and . Then there exists a surjective isometry if and only if and there exist surjective real-linear isometries and . Moreover, every such surjective isometry extends uniquely to
where and are uniquely determined by . For a fixed scalar field , such exists if and only if .
Proof. For , the finite -sum of strictly convex spaces is strictly convex. Apply Theorem 1.1 through Proposition 4.8, using condition (D) of .
In the scalar case, the real dimensions of the first components give . Conversely, if , take to be the identity and define , where is a homeomorphism. Formula (19) gives the required isometry. □
For a common exponent , Corollary 4.9 is already covered by [16 Theorem 1.8]. More generally, Wang’s Theorem 1.8 covers when is strictly convex and , without requiring strict convexity of . The additional value-space assumptions in Wang’s Theorem 1.10 concern pointwise representations.
Remark 4.10 (Known endpoint consequences). For and strictly convex , the decomposition into copies of and one copy of allows the application of [17 Theorems 3.3–3.5]. Each component is of type. None is isometric to real , and is the unique component that is not strictly convex. Consequently, every surjective isometry between the unit spheres extends, , and the extension is
where is a permutation and and are surjective real-linear isometries. The converse follows from the decomposition.
For scalar-valued functions and ,
where is a discrete set of points. The scalar continuous-function extension theorems [15, 9], followed by the real Banach–Stone theorem, give extension and equality of the orders, since a homeomorphism preserves the isolated points. For general , the analogous identification is with ; an extension conclusion then requires a suitable vector-valued continuous-function theorem.
Remark 4.11 (Scalar representation). For a common and , the scalar extensions above can be written as
Here is a homeomorphism, is continuous with , and is constant in the complex case. In the real case, is a constant sign and . The real Banach–Stone representation of the continuous-function component is determined by , and [3]. For , the finite-dimensional component has the form
with a permutation , unimodular , and independent conjugation choices; over the factors are signs and all . The stated representation of follows from preservation of disjoint coordinate supports for , , and duality for . For , is an arbitrary element of over , or over viewed as a real space. Conversely, every choice of , , , and satisfying the stated conditions determines a surjective real-linear isometry.
It is worth emphasizing that, in the scalar-valued case, the differentiability order is determined by the metric structure of the unit sphere. More precisely, for , Corollary 4.9 shows that the existence of a surjective isometry between the unit spheres of and forces , without any linearity assumption on the given isometry. For a fixed exponent , the preservation of the differentiability order already follows from Wang’s theorem [16 Theorem 1.8] and the finite-dimensionality of the first component. The additional feature of Corollary 4.9 is that the outer exponents are also allowed to differ initially and are necessarily equal.
Use of AI tools
The author used ChatGPT (OpenAI) to assist with developing and revising mathematical arguments and proof drafts, organizing the manuscript, and improving its exposition. This assistance included the direct-sum extension arguments and the function-space applications in Sections 3 and 4. The author independently checked the mathematical arguments and references, revised the generated material, and takes full responsibility for the final manuscript.
Department of Applied Mathematics, National Sun Yat-sen University, Kaohsiung 80424, Taiwan; and Graduate School of Science and Technology, Niigata University, Niigata 950–2181, Japan
Email address: [email protected]
References
- [1]T. Banakh, Every 2-dimensional Banach space has the Mazur–Ulam property, Linear Algebra Appl. 632 (2022), 268–280. doi:10.1016/j.laa.2021.09.020.DOI
- [2]D. Cabezas, M. Cueto-Avellaneda, Y. Enami, T. Miura, and A. M. Peralta, Tingley’s problem for complex Banach spaces which do not satisfy the Hausdorff distance condition, Banach J. Math. Anal. 17 (2023), Article 65. doi:10.1007/s43037-023-00291-0. Preprint: arXiv:2210.17131.DOI
- [3]R. J. Fleming and J. E. Jamison, Isometries on Banach Spaces: Function Spaces, Chapman & Hall/CRC Monographs and Surveys in Pure and Applied Mathematics, vol. 129, Chapman & Hall/CRC, Boca Raton, FL, 2003.
- [4]D. H. Fremlin, Measure Theory, vol. 3: Measure Algebras, Torres Fremlin, Colchester, 2002.
- [5]D. Hirota and T. Miura, Tingley’s problem for a Banach space of Lipschitz functions on the closed unit interval, RIMS Kôkyûroku Bessatsu B93 (2023), 157–181.
- [6]M.-R. Lin, A variant of Tingley’s problem on ordered Banach spaces of absolutely continuous functions, preprint (2026). arXiv:2607.10685.arxiv.org/abs/2607.10685
- [7]M.-R. Lin, _Metric rigidity in anchored Sobolev spaces on intervals_, preprint (2026). arXiv:2607.27646.arxiv.org/abs/2607.27646
- [8]P. Mankiewicz, _On extension of isometries in normed linear spaces_, Bull. Acad. Polon. Sci. Sér. Sci. Math. Astronom. Phys. 20 (1972), 367–371.
- [9]M. Mori and N. Ozawa, _Mankiewicz’s theorem and the Mazur–Ulam property for C*-algebras_, Studia Math. 250 (2020), no. 3, 265–281. doi:10.4064/sm180727-14-11.DOI
- [10]A. M. Peralta, _A survey on Tingley’s problem for operator algebras_, Acta Sci. Math. (Szeged) 84 (2018), nos. 1–2, 81–123. doi:10.14232/actasm-018-255-0.DOI
- [11]A. M. Peralta and R. Švarc, _A strengthened Kadison’s transitivity theorem for unital JB*-algebras with applications to the Mazur–Ulam property_, Anal. Math. 15 (2025), Article 91. doi:10.1007/s10473-025-01068-4.arxiv.org/abs/2301.00895
- [12]A. R. Sourour, _The isometries of L^p(Ω,X)_, J. Funct. Anal. 30 (1978), no. 2, 276–285. doi:10.1016/0022-1236(78)90075-7.DOI
- [13]D.-N. Tan, _On extension of isometries on the unit spheres of L^p-spaces for 0 < p ≤ 1_, Nonlinear Anal. 74 (2011), no. 18, 6981–6987. doi:10.1016/j.na.2011.07.035.
- [14]D. Tingley, _Isometries of the unit sphere_, Geom. Dedicata 22 (1987), no. 3, 371–378. doi:10.1007/BF00147942.DOI
- [15]R. Wang, _Isometries between the unit spheres of C₀(Ω)-type spaces_, Acta Math. Sci. 14 (1994), no. 1, 82–89.
- [16]R. Wang, _Isometries on the ℓ^p-sum of C₀(Ω,E) type spaces_, J. Math. Sci. Univ. Tokyo 3 (1996), no. 2, 471–493.
- [17]R. Wang and A. Orihara, _Isometries on the ℓ¹-sum of C₀(Ω,E) type spaces_, J. Math. Sci. Univ. Tokyo 2 (1995), no. 1, 131–154.