WorksPhysics and Astronomy
Stabilizing an atomically thin quantum spin Hall insulator at ambient conditions: Graphene-intercalation of indenene
Abstract
Atomic monolayers on semiconductor surfaces represent a new class of functional quantum materials at the ultimate two-dimensional limit, ranging from superconductors [1, 2] to Mott insulators [3, 4] and ferroelectrics [5] to quantum spin Hall insulators (QSHI) [6, 7]. A case in point is the recently discovered QSHI indenene [7, 8], a triangular monolayer of indium epitaxially grown on SiC(0001), exhibiting a 120meV gap and substrate-matched monodomain growth on the technologically relevant m scale [9]. Its suitability for room-temperature spintronics is countered, however, by the instability of pristine indenene in air, which destroys the system along with its topological character, nullifying hopes of ex-situ processing and device fabrication. Here we show how indenene intercalation into epitaxial graphene offers effective protection from the oxidizing environment, while it leaves the topological character fully intact. This opens an unprecedented realm of ex-situ experimental opportunities, bringing this monolayer QSHI within realistic reach of actual device fabrication and edge channel transport.
With the promise of dissipation-less spin-polarized boundary modes, QSHIs could initiate a paradigm shift in future spintronics technologies. The conceptual application perspective is bright and ranges from spin-transistors [10, 11], to low-power consumption devices [12, 13], to QSHI based quantum computing [14]. However, finding suitable materials for practicable device realization faces major challenges. The band-inverted narrow-gap semiconductors for which the quantum spin Hall effect had first been demonstrated [15, 16] do not lend themselves to room-temperature (RT) applications. 2D Dirac semimetals formed by atomic honeycomb monolayers as motivated by the seminal work of Kane and Mele [17] are a promising alternative [18]. But while spin-orbit coupling (SOC) in graphene is too weak to open an appreciable band gap, QSHI monolayers built from heavier group IV elements such as silicene, germanene, and stanene [19, 20] could experimentally only be synthesized on metal surfaces, preventing their use in actual transport devices, or failed to display a large non-trivial bandgap when placed on a semiconducting substrate [21].
In contrast, band-inverted large gap 2D Dirac semimetals have been successfully realized in group III and V monolayers on SiC(0001), specifically bismuthene [6] and the recently discovered indenene [7], and were experimentally confirmed as QSHIs. They could potentially solve the device challenge, yet, are inherently unstable to environmental factors outside their ultra-high vacuum (UHV) birthplace. This bottleneck has made serious transport device fabrication strategies elusive, and hitherto characterization is mostly bound to UHV-based surface science techniques such as angle resolved photoemission (ARPES) and scanning tunneling microscopy (STM).
Here, we design an extravehicular space suit to make these quantum materials operational in air, by placing quasi-freestanding graphene as protective sheet atop the QSHI monolayer via intercalation. Graphene’s resilience to ambient conditions provides an efficient protection against oxidation, while it leaves the intercalated material unaffected as was shown for a variety of few-layer quantum materials [22, 23]. With respect to topological physics, intercalation was suggested as a means to tailor the spin-orbit gap of graphene [24]. In contrast, here we reverse the roles of graphene and the intercalant, by using the former to stabilize the latter as a QSHI. For this purpose we employ indenene, the triangular monolayer phase of indium that can be grown routinely in high quality monodomains on large areas of SiC [9]. It is particularly suited for wafer-sized intercalation, which not only protects both its structure and its topological character but also ensures its chemical integrity upon exposure to environmental conditions, as we demonstrate below.
In its pristine form, the topological electronic structure of indenene is the result of a synergetic interplay of the indium monolayer and its underlying SiC substrate. The latter breaks the surface mirror plane and gaps out the metallic indium states, leaving a set of Dirac bands of in-plane -orbital character located at the K-point of the Brillouin zone (see Figure 1a). The degeneracy of the Dirac point is lifted by two counteracting mechanisms [7, 8]. While in-plane inversion symmetry breaking (ISB), induced by the topmost carbon atoms of the substrate (see Figure 1c), promotes a trivial band gap, atomic SOC drives band inversion and hence a large QSHI gap. As the bonding distance between indium and the topmost Si-layer controls the ISB strength felt by the In monolayer and consequently determines its topology and gap size, it has been used as one among several experimental indicators to measure indenene’s topology. We thus find the pristine form to lie deep within the QSHI regime (Figure 1c, blue data point) [7].

Figure 1. Graphene intercalated indenene is topologically non-trivial and resilient to atmosphere. a,b ARPES spectra at the K-point of pristine a and intercalated b indenene (normalized by integrated EDC) measured with 21.2 eV photons at 20 K and overlaid DFT (HSE06) calculations (dotted lines) of pristine indenene. The band splitting in a and b originate from the combined role of SOC and ISB as discussed in the text. c DFT (HSE06) band gap calculations as well as a guide to the eye (red line) of pristine indenene as a function of the In-Si bond length , the latter controlling the ISB strength as indicated by a black arrow. Experimentally (by X-ray standing wave photoemission) determined of intercalated (yellow data point) and pristine (blue data point) indenene are placed in this diagram. d,e In 3d XPS core-level peaks of d pristine and e intercalated indenene, for the as-grown films (black; eV; eV), after exposure to 21 kL (red) of oxygen (InO marks the chemically shifted oxidized In species), after 10 min exposure to ambient air (green, only e), and after immersion in liquid water and subsequent mild in-vacuo degas (blue) as specified in the Methods section.
Intercalating indenene into the graphene/SiC interface, the massive Dirac bands are found to be well preserved, yet, significantly depopulated with shifted from - to -type indenene (Figure 1b). At the same time, the slight increase in the measured bonding distance indicates that graphene pulls indenene away from the substrate and thus points to a further reduction of the ISB strength with respect to the pristine case, preserving SOC as the dominating factor, and stabilizing the topological gap along with the QSHI state (Figure 1c, yellow data point).
The virtue of this graphene-covered QSHI relies on its resilience against oxidation, which we study by controlled oxygen exposure and subsequent X-ray photoelectron spectroscopy (XPS) on the pristine (Figure 1d) and intercalated indenene (Figure 1e). In both cases, the as-grown material (black spectra) reveals identical In doublets. Exposing pristine indenene to large doses of oxygen (red) causes these peaks to broaden and display a chemical shift to higher binding energies, indicating strong indium oxidation [27]. In contrast, exposing intercalated indenene to the same dose of pure oxygen (red), ambient air (green) or even water (blue) has virtually no impact on the indium oxidation state as well as its band structure (shown in Figure 4c,Figure 4d after comprehensive discussion) and thus confirms the protective function of the graphene overlayer.

Figure 4. Indenene band splitting at K as QSHI signature. DFT (PBE) band structure (black) around the K-point of pristine a and intercalated indenene b with indium character represented by the blue disk size (radius). Band splitting among the valence (conduction) bands is driven by the ISB strength (arrow), while the larger splitting (arrow) opens a topologically non-trivial gap. Note that the combined super cell (inset) leads to band backfolding which projects graphene bands (black) into the indenene gap. Importantly, in order to disentangle the role of from the graphene-induced change in , we calculate both band structures at the In-Si bonding distance determined from XSW of intercalated indenene. c Normal-ized ARPES measurements of the KM-direction of intercalated indenene and d the graphene K-point, both taken at RT and eV after immersion in liquid water and mild degassing (see Methods).
Having summarized the phenomenology, let us now focus on detailed aspects of indium intercalation [22, 28, 29], especially the large area growth of monolayer indenene and the identification of its non-trivial topology. Following the well-established recipe of Ref. 25, the synthesis is initiated by sublimating the topmost Si atoms off the SiC(0001) substrate, leaving a C-rich buffer layer referred to as zero-layer graphene (ZLG, Figure 2a). Low energy electron diffraction (LEED, Figure 2aFigure 1) reveals a characteristic (6 × 6)R30° fingerprint relative to the SiC(0001) (1 × 1) surface unit cell signalling a homogeneous ZLG coverage of the substrate. Corresponding ARPES measurements (Figure 2aFigure 2) show a broad and non-dispersive valence state at the K-point of the graphene Brillouin zone, affirming the covalent bonding (Figure 2aFigure 3) to the underlying SiC that prevents ZLG from developing linear -bands [25].
Figure 2. The indenene intercalation process. (a₁,b₁,c₁) LEED images taken at 100 eV, (a₂,b₂,c₂) ARPES spectra around the graphene K-point K and (a₃,b₃,c₃) schematic ball-and-stick model for a ZLG, b after indium bilayer intercalation and c graphene capped indenene. LEED images are normalized to SiC(0001) (1 × 1) spot (blue) intensities and show diffraction spots of (6 × 6)R30° periodicity (orange) [25] and graphene (black). Red marks indicate a selection of possible scattering vectors between SiC(0001) (1 × 1) and graphene [26]. d,e Room-temperature STEM image of the 2 ML and 1 ML indium intercalated systems, respectively.
Figure 3. The band structure of pristine and graphene capped In phases. ARPES of a pristine bilayer, b monolayer indium and c intercalated bilayer, d monolayer indium on SiC(0001). The pristine data (a,b) was taken at RT with , while the intercalated data (c,d) was taken at . Blue arrows indicate distinct band maxima due to out-of-plane mirror symmetry breaking and orbital hybridization. The top row illustrations show the Brillouin zones of indenene (blue) and graphene (black) and the high symmetry -path (red) along which the ARPES data is shown. Graphene band replicas in (c,d) that are consistent with electron diffraction off the underlying In/SiC lattice (sketch top right, i.e., with scattering vector ) are labelled R, while replicas consistent with multiple scattering (i.e., with scattering vectors , being the graphene reciprocal lattice vectors) are labelled R.
dispersive valence state at the K-point of the graphene Brillouin zone, affirming the covalent bonding (Figure 2aFigure 3) to the underlying SiC that prevents ZLG from developing linear -bands [25].
In a cyclic process of indium deposition and subsequent annealing, we replace the top layer carbon for indium as bonding partner to the substrate, hereby lifting the ZLG template from the subjacent SiC to form quasi-freestanding monolayer graphene (QFMG). The (6 × 6)R30° LEED signature of ZLG weakens significantly, while the diffraction spots of QFMG intensify and mark its decoupling from the substrate (Figure 2bFigure 1 and inset). ARPES now exhibits the characteristic -band crossing of graphene (Figure 2bFigure 2), with the Dirac point (DP) at K (-0.5 eV) lying slightly (80 meV) higher energies as compared to non-intercalated graphene on a ZLG buffer layer [25]. Representative scanning transmission electron micrographs (STEM) (Figure 2d) show two projected indium layers, each containing one In atom per Si site of the SiC surface. This puts forward a (1 × 1) adsorption geometry of 2 ML In on SiC(0001) as illustrated in Figure 2bFigure 3 and is corroborated by the absence of higher order diffraction spots in LEED (Figure 2bFigure 1).
At this point, our experimental results are reminiscent of recent experimental work on 2 ML In intercalated into a graphene-SiC interface with three graphene top layers instead of one [22]. By thermal removal of In (550 °C, 30 min) we now convert indium into monolayer indenene, pushing this material into the QSHI phase. STEM in Figure 2e exposes the indenene/graphene sandwich, with In adsorbed directly above the topmost Si species of SiC (Figure 2cFigure 3) [7]. The corresponding LEED in Figure 2cFigure 1 again shows (1 × 1) periodicity, clear-cut evidence for intercalated indenene to arrange in the same triangular lattice as its pristine counterpart. Quite remarkably, the transformation from 2 ML indium to 1 ML indenene redistributes charge within the heterostructure, shifting the graphene Dirac bands by 0.28 eV higher in energy compared to the 2 ML film as revealed by ARPES. (Figure 2bFigure 2 and cFigure 2). Similar band fillings upon post-annealing were already observed in Ref. 28, yet, were tentatively assigned to incomplete intercalation and a 2 ML phase, respectively. In contrast, we identify graphene doping as clear-cut fingerprint to distinguish bi- from monolayer indium.
To further elaborate on this link, we recapitulate the experimental band structures of pristine 1 ML and 2 ML In films in Figure 3(a,Figure 3b) [9], and compare them to their intercalated counterparts in Figure 3(c,Figure 3d). ARPES at the -point of both pristine phases (a,b) shows the intense SiC valence band maximum as well as an indium-related band dispersing upwards in energy, the latter exposing distinct maxima along the M and K paths (blue arrows). These maxima arise from the substrate-induced breaking of mirror symmetry that fosters hybridization between in- and out-of-plane In orbitals [7], and gaps out the metallic bands observed close to the M-point of 2 ML In, exposing the Dirac states at K that we discussed in Figure 1a [9].
Albeit considerably damped and broadened by the graphene cover, we recognize all ARPES features of the pristine phases to reappear in their intercalated counterparts of Figure 3(c,Figure 3d). Here, we chose a different photon energy at which the indium 2D bands around are more prominent while SiC bands appear suppressed. We also identify the intense -band characteristic of graphene, faintly replicated by final state scattering via higher order reciprocal lattice vectors – an effect known from well-ordered intercalated materials [30] that is also seen in our LEED data, see red marks in Figure 2 bFigure 1, cFigure 1 and Ref. [26].
With respect to pristine indenene, the intercalated indenene bands are shifted up by approximately 250 meV (horizontal lines in Figure 3), corresponding to an overall charge carrier depletion of carriers per cm that we estimate from the Fermi surface area (see Methods) and is in qualitative agreement with the n- to p-type transition in Figure 1(a,Figure 1b). At the same time, Figure 2cFigure 2 suggests the graphene layer to accumulate with respect to charge neutral graphene, indicating a dominating electron transfer from indenene to graphene that is balanced by the underlying SiC substrate [31].
Irrespective of the exact mechanism, the observed charge transfer indicates non-negligible interaction between indenene and graphene that could potentially affect indenene’s topology, for instance by modulating . On top of that, the very presence of graphene tends to increase the distance (see Figure 1c) hence enhancing the dominance of SOC over ISB. To quantify these effects, we add one relevant parameter to our analysis, namely the distance between indium and graphene . Both and can experimentally be accessed by X-ray standing wave (XSW) photoemission that utilizes Bragg scattering off the bulk substrate lattice to generate a modulated wave-field along the surface normal. The photoelectron yields of the In and C core levels get strongly enhanced when the field maxima coincide with the corresponding atomic layer (for details see Methods) [32]. Tuning the photon energy and thus the phase of the standing wave, we measured the layer distances of intercalated indenene and found
and . The latter amounts to about 92% of indium’s van der Waals bonding length [33], underlining graphene’s quasi-freestanding character [34]. In order to disentangle the effect on induced by the SiC-substrate underneath from that of the graphene capping on top, we perform density functional theory (DFT) calculations for indenene without and with graphene cover as shown in Figure 4a and Figure 4b for the same . The results clearly indicate that the bands at the valley momenta preserve their non-trivial sequence. The splitting due to SOC strength gets slightly renormalized but is roughly compensated by a concomitant reduction of the , effectively leaving the band gap unchanged (see arrows). For this reason we conclude that the variation of the In-Si distance induced by the presence of graphene is the main factor determining , as indicated in Figure 1c. This completes the proof of intercalated indenene to be topologically robust and clearly placed within the QSHI regime.
Combined with its remarkable resilience against ambient conditions, this opens up a wealth of experimental possibilities to characterize and manipulate this 2D topological insulator ex-situ. While the conductive nature of the graphene cap may still interfere with meaningful edge transport measurements, its effective protection of the monolayer QSHI certainly paves the way for (nano)fabrication of device structures, e.g., for field effect gating. It also greatly facilitates optical or infrared experiments such as Raman and Landau level spectroscopy in non-vacuum settings, techniques that will give further insight to the physics of this intriguing QSHI. We underline that – quite remarkably – intercalated indenene remains inert even upon immersion in water (see Figure 1e and Figure 4). Beyond the specific case of indenene, this suggests graphene intercalation as a promising route towards the application of atomic monolayers as functional quantum materials, even in rough chemical environments [35].
Data Availability The data that support the plots within this paper and other findings of this study are available from the corresponding author upon reasonable request.
Acknowledgements
We are grateful for funding support from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy through the Würzburg-Dresden Cluster of Excellence on Complexity and Topology in Quantum Matter ct.qmat (EXC 2147, Project ID 390858490) as well as through the Collaborative Research Center SFB 1170 ToCoTronics (Project ID 258499086). We acknowledge Diamond Light Source for time on beamline I09 and I05 under proposals SI31808-1, SI25151-4 and SI30583-1. We gratefully acknowledge the Gauss Centre for Supercomputing e.V. (https://www.gauss-centre.eu) for funding this project by providing computing time on the GCS Supercomputer SuperMUC-NG at Leibniz Supercomputing Centre (https://www.lrz.de).
Author contributions C.S. and J.E. have realized the epitaxial growth and surface characterization and carried out the photoelectron spectroscopy experiments and their analysis. P.E. has conceived the theoretical ideas and performed the DFT, Wannier and Berryology calculations. On the experimental side, contributions came from M.S., K.L., T.W., P.K., M.K., T.K., C.C., T.-L.L., S.M. and R.C., while G.S. gave inputs to the theoretical aspects. R.C. and S.M. supervised this joint project and wrote the manuscript together with all other authors.
Competing interests The authors declare no competing interests.
References
References
- [6]Reis, F. et al. Bismuthene on a SiC substrate: A candidate for a high-temperature quantum spin Hall material. Science 357, 287–290 (2017).DOI
- [7]Bauernfeind, D. et al. Design and realization of topological Dirac fermions on a triangular lattice. Nat. Commun. 12, 5396 (2021).DOI
- [8]Eck, P. et al. Real-space obstruction in quantum spin Hall insulators. Phys. Rev. B 106, 195143 (2022).DOI
- [9]Erhardt, J. et al. Indium epitaxy on sic(0001): A roadmap to large scale growth of the quantum spin Hall insulator indene. J. Phys. Chem. C 126, 16289–16296 (2022).DOI
- [10]Liu, J. et al. Spin-filtered edge states with an electrically tunable gap in a two-dimensional topological crystalline insulator. Nat. Mater. 13, 178–183 (2014).DOI
- [11]Han, W., Otani, Y. & Maekawa, S. Quantum materials for spin and charge conversion. npj Quantum Matter. 3, 27 (2018).DOI
- [12]Michetti, P. & Trauzettel, B. Devices with electrically tunable topological insulating phases. Appl. Phys. Lett. 102, 063503 (2013).DOI
- [13]Qian, X., Liu, J., Fu, L. & Li, J. Quantum spin Hall effect in two-dimensional transition metal dichalcogenides. Science 346, 1344–1347 (2014).DOI
- [14]Aasen, D. et al. Milestones toward Majorana-based quantum computing. Phys. Rev. X 6, 031016 (2016).DOI
- [15]König, M. et al. Quantum spin Hall insulator state in HgTe quantum wells. Science 318, 766–770 (2007).pubmed.ncbi.nlm.nih.gov/17885096
- [16]Knez, I., Du, R.-R. & Sullivan, G. Evidence for Helical Edge Modes in Inverted InAs/GaSb Quantum Wells. Phys. Rev. Lett. 107, 136603 (2011).DOI
- [17]Kane, C. L. & Mele, E. J. Quantum spin Hall effect in graphene. Phys. Rev. Lett. 95 (2005).DOI
- [18]Lodge, M. S., Yang, S., Mukherjee, S. & Weber, B. Atomically thin quantum spin Hall Insulators. Adv. Mater. 33, 2008029 (2021).DOI
- [19]Liu, C.-C., Feng, W. & Yao, Y. Quantum spin Hall effect in silicene and two-dimensional germanium. Phys. Rev. Lett. 107, 076802 (2011).pubmed.ncbi.nlm.nih.gov/21902414
- [20]Xu, Y. et al. Large-gap quantum spin hall insulators in tin films. Phys. Rev. Lett. 111 (2013).DOI
- [21]Kou, L., Ma, Y., Sun, Z., Heine, T. & Chen, C. Two-dimensional topological insulators: Progress and prospects. J. Phys. Chem. Lett. 8, 1905–1919 (2017).DOI
- [22]Briggs, N. et al. Atomically thin half-van der Waals metals enabled by confinement heteroepitaxy. Nat. Mater. 19, 637–643 (2020).
- [23]Wu, S. et al. Advances in two-dimensional heterostructures by mono-element intercalation underneath epitaxial graphene. Prog. Surf. Sci. 96, 100637 (2021).DOI
- [24]Li, Y. et al. Topological insulators in transition-metal intercalated graphene: The role of d electrons in significantly increasing the spin-orbit gap. Phys. Rev. B 87, 245147 (2013).DOI
- [25]Riedl, C., Coletti, C. & Starke, U. Structural and electronic properties of epitaxial graphene on SiC(0001): a review of growth, characterization, transfer doping and hydrogen intercalation. J. Phys. D 43, 374009 (2010).
- [26]Polley, C. M. et al. Origin of the π-band replicas in the electronic structure of graphene grown on 4H-SiC(0001). Phys. Rev. B 99, 115404 (2019).DOI
- [27]Lin, A. W. C., Armstrong, N. R. & Kuwana, T. X-ray photoelectron/Auger electron spectroscopic studies of tin and indium metal foils and oxides. Anal. Chem. 49, 1228–1235 (1977).DOI
- [28]Kim, H., Tsotgtaatar, N., Tuydendori, B., Lkhagvasuren, A. & Seo, J. Effects of two kinds of intercalated In films on quasi-free-standing monolayer graphene formed above SiC(0001). Carbon 159, 229–235 (2020).DOI
- [29]Hu, T. et al. The structure and mechanism of large-scale indium-intercalated graphene transferred from SiC buffer layer. Carbon 171, 829–836 (2021).DOI
- [30]Forti, S. et al. Semiconductor to metal transition in two-dimensional gold and its van der Waals heterostack with graphene. Nat. Commun. 11, 2236 (2020).DOI
- [31]Mammadov, S. et al. Polarization doping of graphene on silicon carbide. 2D Materials 1, 035003 (2014).DOI
- [32]Woodruff, D. P. Surface structure determination using X-ray standing waves. Rep. Prog. Phys. 68, 743 (2005).
- [33]Mantina, M., Chamberlin, A., Valero, R., Cramer, C. & Truhlar, D. Consistent van der Waals radii for the whole main group. J. Phys. Chem. A 113, 5806–5812 (2009).DOI
- [34]Lin, Y.-R. et al. Vertical structure of Sb-intercalated quasifreestanding graphene on SiC(0001). Phys. Rev. B 106, 155418 (2022).DOI
- [35]Glavin, N. R. et al. Emerging applications of elemental 2D materials. Advanced Materials 32, 1904302 (2020).DOI

