betaFeedback

WorksMathematics

Lattice Boltzmann framework for multiphase flows by Eulerian-Eulerian Navier-Stokes equations

Abstract

Although Lattice Boltzmann Method (LBM) is relatively straightforward, it demands a well-crafted framework to handle the complex partial differential equations involved in multiphase flow simulations. For the first time to our knowledge, this work proposes a novel LBM framework to solve Eulerian-Eulerian multiphase flow equations, without any finite difference correction, including very large density ratios and also a realistic relation for the drag coefficient. The proposed methodology and all reported LBM formulas can be applied to any dimension. This opens a promising venue for simulating multiphase flows on large High Performance Computing (HPC) facilities and on novel parallel hardware. This LBM framework consists of six coupled LBM schemes - running on the same lattice - ensuring an efficient implementation in large codes with minimum effort. The preliminary numeral results agree in an excellent way with the a reference numerical solution obtained by a traditional finite difference solver.

Introduction

Computational Fluid Dynamics (CFD) of multiphase flows is crucial in the energy sector, particularly in oil and gas, as it enables the detailed simulation and optimization of complex fluid interactions, such as those in bubble column reactors. These reactors are used extensively in refining processes, gas treatment, and chemical synthesis, where accurate modeling of gas-liquid interactions can lead to improved efficiency, reduced energy consumption, and enhanced safety. Using CFD, industry can better understand the flow dynamics, optimize reactor designs, and ultimately reduce costs and emissions, making it a vital tool for the advancement of sustainable energy solutions.

A multiphase flow system consists of the simultaneous flow of materials with different phases or states of matter in regions bounded by moving interfaces. A possible approach to modeling multiphase flows is the mixture approach, which essentially treats the multiphase system as a single mixture with properties that are weighted averages of the different phases [1]. Instead of solving separate momentum equations for each phase, a single momentum equation is solved for the mixture. For this reason, it is a simple and computationally convenient approach, but with a lower detail level because a proper model must be provided for the velocity difference between the two phases. It needs small relative velocities, so it is more suitable for closely coupled phases moving together (slurry, sediment).

This work, on the other hand, focuses on developing an Eulerian-Eulerian lattice Boltzmann method (LBM) to simulate multiphase flows. This implies the application of a volume averaging procedure to both the continuity and momentum equation for every phase and it requires to define a volume fraction as follows:

αφ=VφV,∑φ=1Pαφ=1,(1)\alpha_{\varphi} = \frac{V_{\varphi}}{V}, \qquad\sum_{\varphi=1}^{P} \alpha_{\varphi} = 1, \tag*{(1)}

where VV is the volume under consideration, the subscript φ\varphi stays for a generic phase and PP for the total number of phases. In the following, for the sake of simplicity and without loss of generality, let us focus on two phases, namely P=2P = 2, where two phases are identified by ll for the liquid phase and gg for the gas phase, respectively. In case P=2P = 2, if φ\varphi stays for a generic phase, then φˉ\bar{\varphi} stays for the other one. Writing down the governing equation for both phases constitutes the Eulerian-Eulerian approach (or two-fluid approach), and is a framework used to model multiphase flows where each phase is treated as a continuum, and separate sets of equations are solved for each phase in the same Eulerian (fixed) reference frame. They are used in fluid dynamics to describe the motion of a fluid while accounting for the effects of spatial variations over a finite region [2]. Let’s start by recalling the original Eulerian-Eulerian Navier-Stokes equations for multiphase flows, in the isothermal limiting case, used in traditional CFD for both phases [3]:

∂(ρlαl)∂t+∇⋅(αlρlul)=0,(2)\frac{\partial(\rho_l\alpha_l)}{\partial t}+\nabla\cdot(\alpha_l\rho_l\mathbf{u}_l)=0, \tag*{(2)}
∂(ρlαlul)∂t+∇⋅(αlρlulul)=−αl∇p+ρlαlg+∇⋅(αlρlσl)+Flg+Fl,(3)\frac{\partial(\rho_l\alpha_l\mathbf{u}_l)}{\partial t}+\nabla\cdot(\alpha_l\rho_l\mathbf{u}_l\mathbf{u}_l)=-\alpha_l\nabla p+\rho_l\alpha_l\mathbf{g}+\nabla\cdot(\alpha_l\rho_l\boldsymbol{\sigma}_l)+\mathbf{F}_{lg}+\mathbf{F}_l, \tag*{(3)}
∂(ρgαg)∂t+∇⋅(αgρgug)=0,(4)\frac{\partial(\rho_g\alpha_g)}{\partial t}+\nabla\cdot(\alpha_g\rho_g\mathbf{u}_g)=0, \tag*{(4)}
∂(ρgαgug)∂t+∇⋅(αgρgugug)=−αg∇p+ρgαgg+∇⋅(αgρgσg)+Fgl+Fg.(5)\frac{\partial(\rho_g\alpha_g\mathbf{u}_g)}{\partial t}+\nabla\cdot(\alpha_g\rho_g\mathbf{u}_g\mathbf{u}_g)=-\alpha_g\nabla p+\rho_g\alpha_g\mathbf{g}+\nabla\cdot(\alpha_g\rho_g\boldsymbol{\sigma}_g)+\mathbf{F}_{gl}+\mathbf{F}_g. \tag*{(5)}

For each phase (the subscript φ\varphi can be either ll or gg), αφ\alpha_\varphi is the previously mentioned volume fraction, ρφ\rho_\varphi is the density, uφ\mathbf{u}_\varphi the velocity vector, σφ\boldsymbol{\sigma}_\varphi the viscous stress tensor per unit volume, pp the common pressure, Fgl=−Flg\mathbf{F}_{gl}=-\mathbf{F}_{lg} is the interphase momentum exchange term, which is a cumulative force resulting from the summation of the single interfacial forces acting between the two phases (drag force, lift force, wall lubrication, virtual mass, etc) per unity volume and Fφ\mathbf{F}_\varphi is the force per unit volume of the specific phase φ\varphi.

Concerning the interphase momentum exchange, let us suppose to limit the following discussion to the drag contribution only, which can be formulated as

Fgl=ρgKI∥ul−ug∥(ul−ug)=−Flg,(6)\mathbf{F}_{gl}=\rho_g K_I\lVert\mathbf{u}_l-\mathbf{u}_g\rVert(\mathbf{u}_l-\mathbf{u}_g)=-\mathbf{F}_{lg}, \tag*{(6)}

where KIK_I is the effective drag coefficient and is evaluated from empirical or semi-empirical correlations. The viscous stress tensor per unit volume is defined as follows:

σφ=νφ(∇uφ+∇uφT)+(ξφ−23νφ)(∇⋅uφ)I,(7)\boldsymbol{\sigma}_\varphi=\nu_\varphi\left(\nabla\mathbf{u}_\varphi+\nabla\mathbf{u}_\varphi^{T}\right)+\left(\xi_\varphi-\frac{2}{3}\nu_\varphi\right)(\nabla\cdot\mathbf{u}_\varphi)\mathbf{I}, \tag*{(7)}

where νφ\nu_\varphi is the effective kinematic viscosity for the generic phase, defined as the ratio between dynamic viscosity and density, i.e. νφ=μφ/ρφ\nu_\varphi=\mu_\varphi/\rho_\varphi, and ξφ\xi_\varphi is the effective kinematic bulk viscosity. In general, the effective kinematic viscosity should also include turbulent effects. It is important to realize that, in multiphase flows, even under the incompressible limit which we will discuss in the following, ∇⋅uφ\nabla\cdot\mathbf{u}_\varphi for the individual phase can be different from zero in general.

The previous equations define a proper system of equations for the following variables: αg\alpha_g, pp, ug\mathbf{u}_g and ul\mathbf{u}_l, as far as the equation of state for the dispersed phase, i.e. ρg=ρg(p)\rho_g = \rho_g(p), and the equation of state for the liquid phase, i.e. ρl=ρl(p)\rho_l = \rho_l(p) in the isothermal limiting case, are provided.

In case of the incompressible limit (i.e. low Mach number limit), one can assume the following equations of state: ρg=ρg(p)=ρg0\rho_g = \rho_g(p) = \rho_g^0 and ρl=ρl(p)=ρl0\rho_l = \rho_l(p) = \rho_l^0, where ρg0\rho_g^0 and ρl0\rho_l^0 are proper constants consisting in the average density of each phase. In this case, the previous equations reduce to the following:

∂αl∂t+∇⋅(αlul)=0,(8)\frac{\partial\alpha_l}{\partial t} + \nabla\cdot(\alpha_l \mathbf{u}_l) = 0, \tag*{(8)}
∂(αlul)∂t+∇⋅(αlulul)=−αlρl0∇p+αlg+∇⋅(αlσl)+1ρl0(Flg+Fl),(9)\frac{\partial(\alpha_l \mathbf{u}_l)}{\partial t} + \nabla\cdot(\alpha_l \mathbf{u}_l \mathbf{u}_l) = -\frac{\alpha_l}{\rho_l^0}\nabla p + \alpha_l \mathbf{g} + \nabla\cdot(\alpha_l \boldsymbol{\sigma}_l) + \frac{1}{\rho_l^0}(\mathbf{F}_{lg} + \mathbf{F}_l), \tag*{(9)}
∂αg∂t+∇⋅(αgug)=0,(10)\frac{\partial\alpha_g}{\partial t} + \nabla\cdot(\alpha_g \mathbf{u}_g) = 0, \tag*{(10)}
∂(αgug)∂t+∇⋅(αgugug)=−αgρg0∇p+αgg+∇⋅(αgσg)+1ρg0(Fgl+Fg).(11)\frac{\partial(\alpha_g \mathbf{u}_g)}{\partial t} + \nabla\cdot(\alpha_g \mathbf{u}_g \mathbf{u}_g) = -\frac{\alpha_g}{\rho_g^0}\nabla p + \alpha_g \mathbf{g} + \nabla\cdot(\alpha_g \boldsymbol{\sigma}_g) + \frac{1}{\rho_g^0}(\mathbf{F}_{gl} + \mathbf{F}_g). \tag*{(11)}

From the numerical point of view, the previous formulation is not convenient and it is better to derive an equivalent system of equations. Summing up continuity equations for both phases in the incompressible limit yields:

∇⋅(αgug+αlul)=0.(12)\nabla\cdot(\alpha_g \mathbf{u}_g + \alpha_l \mathbf{u}_l) = 0. \tag*{(12)}

Summing up momentum equations for both phases in the incompressible limit yields:

References

  1. [1]M. Manninen, V. Taivassalo, and S. Kallio. On the mixture model for multiphase flow. Espoo, VTT Publications 288, 1996.
  2. [2]A. Prosperetti and G. Tryggvason. Computational Methods for Multi-phase Flow. Cambridge University Press, 2007.
  3. [3]F. Maniscalco, A. Buffo, D. Marchisio, and M. Vanni. Numerical simulation of bubble columns: Les turbulence model and interphase forces blending approach. Chemical Engineering Research and Design, 173, 2021.DOI
  4. [4]P. J. Oliveira and R. I. Issa. Numerical aspects of an algorithm for the eulerian simulation of two-phase flows. Int. J. Numer. Methods Fluids, 43:1177–1198, 2003.DOI
  5. [5]C. B. Laney. Computational Gasdynamics. Cambridge University Press, 1998.DOI
  6. [6]A. Passalacqua and R.O. Fox. Implementation of an iterative solution procedure for multi-fluid gas-particle flow models on unstructured grids. Powder Technology, 213:174–187, 2011.DOI
  7. [7]Pierre Lallemand, Li-Shi Luo, Manfred Krafczyk, and Wen-An Yong. The lattice boltzmann method for nearly incompressible flows. Journal of Computational Physics, 431:109713, 2021. ISSN 0021-9991. doi: 10.1016/j.jcp.2020.109713.DOI
  8. [8]T. Ohwada and P. Asinari. Artificial compressibility method revisited: Asymptotic numerical method for incompressible navier–stokes equations. Journal of Computational Physics, 229:1698–1723, 2010.DOI
  9. [9]T. Timm Krüger, H. Kusumaatmaja, A. Kuzmin, O. Shardt, G. Silva, and E. M. Viggen. The Lattice Boltzmann Method. Springer Nature, 2017.
  10. [10]M. Junk, A. Klar, and L.-S. Luo. Asymptotic analysis of the lattice boltzmann equation. Journal of Computational Physics, 210(2):676 – 704, 2005. doi: 10.1016/j.jcp.2005.05.003.DOI
  11. [11]D. B. Spalding. The numerical computation of multi-phase flows. Technical report, Imperial College of London, 1985.
  12. [12]T. Inamuro. A lattice kinetic scheme for incompressible viscous flows with heat transfer. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 360(1792):477 – 484, 2002. doi: 10.1098/rsta.2001.0942.DOI
  13. [13]P. Asinari, T. Ohwada, E. Chiavazzo, and A.F. Di Rienzo. Link-wise artificial compressibility method. Journal of Computational Physics, 231 (15):5109 – 5143, 2012. doi: 10.1016/j.jcp.2012.04.027.DOI
  14. [14]D. Pfleger, S. Gomes, N. Gilbert, and H.-G. Wagner. Hydrodynamic simulations of laboratory scale bubble columns fundamental studies of the eulerian–eulerian modelling approach. Chemical Engineering Science, 54(21):5091–5099, 1999. doi: 10.1016/S0009-2509(99)00261-4.DOI

Paper details

vlnc:W_azmq6yrf
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents