betaFeedback

WorksPhysics and Astronomy

Scaling analysis of quantum geometry in second-order nonlinear transport

Abstract

Quantum geometry encodes the structure of the Hilbert space of Bloch states and can be accessed through nonlinear transport. Yet, disorder-induced mechanisms generically contribute to nonlinear transport, making it difficult to isolate quantum-geometric contributions in experiments. Here we systematically enumerate geometric and disorder-induced mechanisms of the second-order nonlinear Hall effect and derive a scaling law that expresses the nonlinear Hall conductivity as a polynomial of the linear longitudinal conductivity. Crucially, each mechanism carries a distinct "weight fingerprint" in the polynomial, enabling a quantitative disentanglement of quantum geometry from disorder backgrounds in existing experiments, both with and without time-reversal symmetry. Our results provide an implementable workflow for identifying quantum-geometric contributions in nonlinear-transport measurements.

Introduction

The nonlinear Hall effect manifests as a transverse voltage nonlinearly dependent on the longitudinal driving current [Fig. 1(a)] [1–11]. It has attracted broad interest due to its potential as a spectroscopic tool [18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30] [12, 13, 14, 15, 16, 17] and in device applications such as wireless rectification [31, 32], as well as its connections to nonlinear optics [33, 34] [35, 36]. Notably, the second-order response can originate from the quantum metric [1, 8, 9] and Berry curvature [2, 3, 5], which correspond to the real and imaginary parts of quantum geometry, respectively [37–45]. Quantum geometry quantifies distances between quantum states and can provide geometric insights into challenges in condensed matter [46], in particular in the fractional Chern insulator [39–41] and flat-band superconductivity [42, 43]. However, disorder-induced mechanisms, such as side jump (SJ) that shifts coordinates of electrons sideways and skew scattering (SK) that asymmetrically deflects electrons [Fig. 1(b)] [47], are often comparable and must be accounted for in the nonlinear transport [31, 33] [12, 48, 49]. Therefore, a central open issue is how to unambiguously identify quantum geometry from the disorder-induced mechanisms, despite a huge amount of experimental data.

In this work, we derive the formulas for all possible mechanisms of second-order nonlinear transport by treating geometry and disorder on an equal footing. The formulas allow us to derive a scaling law that expresses the nonlinear Hall conductivity as a polynomial function of the linear longitudinal conductivity. More importantly, we find each mechanism has a distinct weight distribution of the polynomial terms, which allows us to identify quantum geometry from disorder-induced mechanisms in the recent experiments with and without T\mathcal{T} symmetry. The formulas also allow us to determine nonzero nonlinear conductivity elements for materials categorized by the magnetic point groups. Our theory is not only a comprehensive description of the second-order nonlinear transport, but also provides a quantitative tool and implementable workflow for identifying quantum-geometry-driven nonlinear responses in future experiments and applications.

Mechanisms of second-order nonlinear transport

A Hall effect occurs when electrons driven by an electric field are deflected to the transverse direction. In the absence of an external magnetic field, three mechanisms may lead to the Hall effect linear in electric field E⃗\vec{E}: Berry curvature, SJ, and SK [47], as shown in Figure 1(b). The Berry curvature [50] describes the curvature of the Hilbert space of the Bloch states, which thereby prevents electrons from moving straight in a perfect crystal. Moreover, the Berry-curvature contribution itself acquires an electric-field-induced geometric correction, governed by the quantum metric [1, 8, 9]. In the presence of disorder, that is, imperfection of the crystal, SJ shifts the coordinates of spin-up and spin-down electrons sideways in opposite directions, and SK asymmetrically deflects spin-up and spin-down electrons due to the spin-orbit coupling. These mechanisms and mixing of them can capture all contributions up to second order in the electric field (i.e., ∝E2\propto E^2) within the semiclassical framework. The hierarchy of all mechanisms for the nonlinear Hall effect is categorized in Figure 1(c) according to three different symmetries, i.e., the T\mathcal{T}, P\mathcal{P}, and combined PT\mathcal{PT} symmetries.

Image not extracted

Figure 1. Mechanisms of the second-order nonlinear transport. (a) Nonlinear Hall effect is measured experimentally as a double-frequency transverse voltage V2ωV_{2\omega} driven by a low-frequency current IωI_{\omega} (10–1000 Hz), or calculated theoretically as a current density J2ωJ_{2\omega} driven by an electric field EωE_{\omega}. (b) The building blocks for the nonlinear transport, including quantum geometry (= quantum metric −i/2-i/2 Berry curvature), SJ (which induces a lateral coordinate shift of spin-up and spin-down electrons oppositely by δr\delta r), and SK (which asymmetrically deflects spin-up and spin-down electrons). (c) Hierarchy of the second-order nonlinear transport. (i) The Berry curvature dipole (BCD) [2, 3], SJ, and SK mechanisms [12, 14] survive time-reversal (T\mathcal{T}) symmetry, require broken spatial inversion (P\mathcal{P}) symmetry, and are forbidden by PT\mathcal{PT} symmetry. (ii) The Drude, quantum metric dipole (QMD) [1, 8, 9] mechanisms as well as second-order skew scattering (2SK), second-order side jump (2SJ), side-jump-plus-skew-scattering (SSK), Berry-curvature-plus-side-jump (BSJ), and Berry-curvature-plus-skew scattering (BSK), part of which has been known as the anomalous skew scattering [33], require broken T\mathcal{T} and P\mathcal{P} symmetries but survive the combined PT\mathcal{PT} symmetry.

Experimentally, the nonlinear Hall effect is measured as a double-frequency transverse voltage in response to a low-frequency current (10–1000 Hz). Theoretically, the nonlinear conductivity χabc\chi_{abc} is defined in terms of the double-frequency current density

Ja(2ω)=χabcEb(ω)Ec(ω),(1)J_a(2\omega) = \chi_{abc} E_b(\omega) E_c(\omega), \tag*{(1)}

in response to low-frequency electric fields Eb(ω)E_b(\omega) and Ec(ω)E_c(\omega), where ω\omega is the frequency, a,b,c∈{x,y,z}a,b,c \in\{x,y,z\}. χabc\chi_{abc} can be calculated using the semiclassical theory to treat quantum geometry (including the Berry curvature and quantum metric) and disorder on an equal footing. We find that the second-order nonlinear conductivity χabc\chi_{abc} can be decomposed as

χabc=χDrude+χBCD+χSJ+χSK+χQMD+χ2SK+χ2SJ+χSSK+χBSJ+χBSK,(2)\chi_{abc} = \chi^{\mathrm{Drude}} + \chi^{\mathrm{BCD}} + \chi^{\mathrm{SJ}} + \chi^{\mathrm{SK}} + \chi^{\mathrm{QMD}} + \chi^{\mathrm{2SK}} + \chi^{\mathrm{2SJ}} + \chi^{\mathrm{SSK}} + \chi^{\mathrm{BSJ}} + \chi^{\mathrm{BSK}}, \tag*{(2)}

where χ2SK\chi^{\mathrm{2SK}}, χ2SJ\chi^{\mathrm{2SJ}}, χSSK\chi^{\mathrm{SSK}}, χBSJ\chi^{\mathrm{BSJ}}, and part of χBSK\chi^{\mathrm{BSK}} are derived in this work, complementing five previously known mechanisms [31, 33] [1, 2, 3, 8, 9, 12, 49]. Among the mechanisms, QMD and BCD are particularly notable as they directly probe quantum geometry that measures the distance between quantum states. All terms on the first line of Eq. (2) have the same symmetry under which the quantum metric emerges in the nonlinear transport. The derivation, explicit formulas, and symmetries of the mechanisms can be found in Appendix.

MechanismC4σx4C_{4\sigma x}^{4}C3σx0C_{3\sigma x}^{0}C2σx2C_{2\sigma x}^{2}C1σxC_{1\sigma x}C0C_{0}
Drude00100
BCD*00010
SJ*001−10
SK*01−2−10
QMD00001
BSJ0001−1
2SK1−46−41
SSK01−33−1
BSK, 2SJ001−21

Table 1. Weights of the polynomial terms in the scaling law Eq. (3) for each of the mechanisms of the second-order nonlinear Hall effect in Figure 1. The mechanisms without (with) an asterisk (do not) require broken T\mathcal{T} symmetry.

Scaling law of second-order nonlinear transport

Because disorder-induced mechanisms are present, quantitatively identifying the quantum-geometry contributions to nonlinear transport remains challenging. Scaling laws have proven successful in distinguishing mechanisms in linear Hall effects [47, 51, 52]. We derive a scaling law for the second-order nonlinear transport as a polynomial relation between the transverse nonlinear Hall conductivity χyxx\chi_{yxx} and longitudinal linear conductivity σxx\sigma_{xx}

χyxx=C4σxx4+C3σxx3+C2σxx2+C1σxx+C0,(3)\chi_{yxx}=C_{4}\sigma_{xx}^{4}+C_{3}\sigma_{xx}^{3}+C_{2}\sigma_{xx}^{2}+C_{1}\sigma_{xx}+C_{0}, \tag*{(3)}

where in experiments χyxx=Vy2ωσxxL2/(Vxω)2W\chi_{yxx}=V_{y}^{2\omega}\sigma_{xx}L^{2}/(V_{x}^{\omega})^{2}W, LL is the length, WW is the width in two-dimensional (2D) systems or cross-sectional area in three-dimensional (3D) systems, Vy2ωV_{y}^{2\omega} is the transverse double-frequency voltage, and VxωV_{x}^{\omega} is the longitudinal single-frequency voltage. The scaling law is also found for T\mathcal{T}-odd nonlinear Hall effect [49]. In this work, we further find distinct weight distributions of the CiσxxiC_{i}\sigma_{xx}^{i} terms for all the mechanisms, as shown in Table I, which could serve as signatures to distinguish the mechanisms in experiments. Except that the BSK and 2SJ mechanisms have the same weight distribution, the remaining 8 out of 10 mechanisms have unique weight distributions, such as QMD or 2SK. The workflow of identifying the mechanisms is as follows. (i) Fit χyxx\chi_{yxx} as a polynomial of σxx\sigma_{xx} using Eq. (3). (ii) Identify the underlying mechanisms by matching the fitted weights to Table I.

In Figure 2 we present the fitting results for a series of experiments on MnBi2_2Te4_4 thin films [10, 11, 53], which preserve PT\mathcal{PT} symmetry, therefore QMD is expected to dominate the nonlinear Hall effect. Figure 2(a) and (Figure 2b) are for a 6-septuple-layer MnBi2_2Te4_4 thin film strained by black phosphorus [10]. The fitting shows a dominant C0C_{0} term, indicating the dominance of QMD in this experiment according to Table I. Figure 2(c)–(Figure 2f) are for two devices of 6-septuple-layer MnBi2_2Te4_4 [11, 53] in the absence of the black phosphorus. In both devices, the mechanisms are found to be from both QMD and a disorder-induced Drude mechanism, although the two devices are quite different in the magnitudes of the linear longitudinal and second-order Hall conductivities. Figure 2(g) and (Figure 2h) are for a 4-septuple-layer MnBi2_2Te4_4 thin film [11], which indicates that Drude and QMD are the dominant mechanisms, while 2SJ, 2SK, and SSK make only minor contributions.

Image not extracted

Figure 2. Scaling analysis of the mechanisms for the nonlinear Hall effect in MnBi2_2Te4_4 thin films. (a) Fitted nonlinear Hall conductivity χyxx\chi_{yxx} (red solid curve) as a function of the linear longitudinal conductivity σxx\sigma_{xx}, for the experimental data (circles) of a 6-septuple-layer MnBi2_2Te4_4 thin film strained by black phosphorus in the temperature range T=2T = 2–1313 K [10]. (b) Weights of the five CiσxxiC_i\sigma_{xx}^{i} terms in Eq. (3) for the data from (a) at σxx=540\sigma_{xx} = 540 μ\muS (indicated by the arrow). [(c) and (d)] For a 6-septuple-layer MnBi2_2Te4_4 thin film without phosphorus in the temperature range T=2T = 2–2020 K [53]. [(e) and (f)] For a 6-septuple-layer MnBi2_2Te4_4 thin film without phosphorus in the temperature range T=2T = 2–1010 K [11]. [(g) and (h)] For a 4-septuple-layer MnBi2_2Te4_4 thin film in the temperature range T=1.6T = 1.6–1010 K [11]. In (h), the weight of the QMD mechanism is multiplied by 200 times for demonstration and non-QMD is the summation of the weights of the 2SJ, 2SK, SSK, and Drude mechanisms. Different from other panels, the weights in (h) is not displayed in terms of the polynomials of σxx\sigma_{xx} but in terms of the mechanisms.

The substantially different dominant mechanisms in the devices could be understood in terms of their symmetries. The unstrained MnBi2_2Te4_4 thin film has a threefold rotational C3C_{3} symmetry, which can be broken by strain. The C3C_{3} symmetry forbids geometric mechanisms [12], including the BCD and QMD mechanisms. The 6-septuple-layer devices in the absence of black phosphorus likely experience extrinsic C3C_{3} symmetry breaking (e.g., substrate-induced strain or inhomogeneity), allowing QMD to emerge as one of the dominant mechanisms. In summary, the fitting results in Figure 2 support QMD as the dominant mechanism of nonlinear Hall effect in most devices.

Strategy and reliability of fitting

We also apply the scaling law to T\mathcal{T}-even devices to identify the BCD mechanism. Figure 3 shows the fitting results for two devices of transition metal dichalcogenides, one is WTe2_2, the other is MoTe2_2. In both cases, the nonlinear Hall conductivity is found to arise from both BCD and disorder (SJ and SK) mechanisms. More importantly, our scaling analysis can quantitatively distinguish the BCD contribution from the SJ and SK contributions.

Image not extracted

Figure 3. Scaling analysis of the mechanisms for the nonlinear Hall effect in T\mathcal{T}-even systems. (a) Fitted nonlinear Hall conductivity χyxx\chi_{yxx} (red solid curve) as a function of the linear longitudinal conductivity σxx\sigma_{xx} for the experimental data (circles) of a device of WTe2_2 in the temperature range T=2T = 2–100100 K [6]. (b) Weights of the five CiσxxiC_i\sigma_{xx}^{i} terms in Eq. (3) for the data from (a) at σxx=3.96×103\sigma_{xx} = 3.96 \times10^3 S·cm−1^{-1} (indicated by the arrow). [(c) and (d)] For a device of MoTe2_2 in the temperature range T=2.5T = 2.5–100100 K [54].

To reduce the difficulty of fitting with too many parameters, our strategy is to discard statistically insignificant CnσxxnC_{n}\sigma_{xx}^{n} terms when ∣Cn∣<2δn|C_{n}|<2\delta_{n}, where δn\delta_{n} is the standard error, because they are statistically indistinguishable from zero within δn\delta_{n}. After eliminating the insignificant terms, the scaling law can be rewritten in terms of the mechanisms, to quantify the ratios of the contributing mechanisms. For MnBi2_2Te4_4 thin films in Figure 2, the scaling law becomes

χyxx=CDrudeσxx2+CQMD(4)\chi_{yxx}=C_{\mathrm{Drude}}\sigma_{xx}^{2}+C_{\mathrm{QMD}} \tag*{(4)}

for the 6 septuple layers, and

χyxx=C2SK(1−σxxσxx0)4+CSSK(1−σxxσxx0)3+C2SJ(1−σxxσxx0)2+CDrudeσxx2+CQMD(5)\chi_{yxx}=C_{\mathrm{2SK}}\left(1-\frac{\sigma_{xx}}{\sigma_{xx0}}\right)^{4}+C_{\mathrm{SSK}}\left(1-\frac{\sigma_{xx}}{\sigma_{xx0}}\right)^{3} +C_{\mathrm{2SJ}}\left(1-\frac{\sigma_{xx}}{\sigma_{xx0}}\right)^{2}+C_{\mathrm{Drude}}\sigma_{xx}^{2} +C_{\mathrm{QMD}} \tag*{(5)}

for the 4 septuple layers, respectively. For the 6 septuple layers strained by black phosphorus [10] in Figure 2(a), CQMD=13.3±0.005C_{\mathrm{QMD}}=13.3\pm0.005, where the ±\pm sign gives the standard error. For the 6 septuple layers [53] in Figure 2(c), CQMD=(−1.245±0.079)×10−1C_{\mathrm{QMD}}=(-1.245\pm0.079)\times10^{-1} and CDrude=(1.725±0.051)×10−2C_{\mathrm{Drude}}=(1.725\pm0.051)\times10^{-2}. For the 6 septuple layers [11] in Figure 2(e), CQMD=(−3.74±0.317)×103C_{\mathrm{QMD}}=(-3.74\pm0.317)\times10^{3} and CDrude=(5.59±1.12)×10−3C_{\mathrm{Drude}}=(5.59\pm1.12)\times10^{-3}. For the 4 septuple layers [11] in Figure 2(g), CQMD=(3.08±1.77)×102C_{\mathrm{QMD}}=(3.08\pm1.77)\times10^{2}, CDrude=(−2.38±0.765)×10−2C_{\mathrm{Drude}}=(-2.38\pm0.765)\times10^{-2}, C2SJ=(1.38±0.592)×104C_{\mathrm{2SJ}}=(1.38\pm0.592)\times10^{4}, C2SK=(7.24±7.04)×104C_{\mathrm{2SK}}=(7.24\pm7.04)\times10^{4}, and CSSK=(5.36±3.51)×104C_{\mathrm{SSK}}=(5.36\pm3.51)\times10^{4}. σxx0\sigma_{xx0} is the longitudinal linear conductivity at zero temperature (or the lowest temperature). Similarly, for the T\mathcal{T}-even cases in Figure 3, the scaling law reduces to

χyxx=CSKσxx(1−σxxσxx0)2+CSJσxx(1−σxxσxx0)+CBCDσxx+CS,(6)\chi_{yxx}=C_{\mathrm{SK}}\sigma_{xx}\left(1-\frac{\sigma_{xx}}{\sigma_{xx0}}\right)^{2}+C_{\mathrm{SJ}}\sigma_{xx}\left(1-\frac{\sigma_{xx}}{\sigma_{xx0}}\right) +C_{\mathrm{BCD}}\sigma_{xx}+C_{\mathrm{S}}, \tag*{(6)}

where CSC_{\mathrm{S}} is a fitting parameter for static scattering [12]. For WTe2_2 [6] in Figure 3(a), CBCD=1.01±0.232C_{\mathrm{BCD}}=1.01\pm0.232, CSJ=−2.58±0.378C_{\mathrm{SJ}}=-2.58\pm0.378, and CS=2.35±1.45C_{\mathrm{S}}=2.35\pm1.45. For MoTe2_2 [54] in Figure 3(c), CBCD=6.47±0.347C_{\mathrm{BCD}}=6.47\pm0.347, CSK=−45.2±5.64C_{\mathrm{SK}}=-45.2\pm5.64, and CSJ=−8.16±2.90C_{\mathrm{SJ}}=-8.16\pm2.90. Besides the standard error, the reliability of our fitting results is also quantified by the coefficient of determination R2R^2 [55], which ∈[0,1]\in[0, 1] and R2=1R^2 = 1 indicates a perfect fit. For the MnBi2_2Te4_4 thin films, R2=0.99392R^2 = 0.99392 [53] and 0.883190.88319 [11] for the 6 septuple layers, respectively, and 0.943600.94360 for the 4 septuple layers [11]. For the 6 septuple layers strained by black phosphorus, the C0C_0 term dominates, so R2R^2 is not applicable. For WTe2_2 and MoTe2_2, R2=0.99836R^2 = 0.99836 and 0.988310.98831, respectively. All the values of R2R^2 are close to 1, indicating the reliability of the fitting results. Moreover, the procedure is validated by the stability of extracted dominant mechanisms across the conductivity range.

Symmetry and Nonzero nonlinear conductivity elements

The C3C_3 symmetry addressed in Figure 2 can be generalized to all magnetic point groups. The point-group symmetries of T\mathcal{T}-even mechanisms of the second-order nonlinear transport have been addressed in the previous work [14]. Here, we focus on the T\mathcal{T}-odd mechanisms, which can be classified into three types according to their symmetry properties when exchanging the indices for the input electric fields and output current

2SK, 2SJ, SSK:χabc=χacb,QMD, BSJ, BSK:χabc=−χcba,Drude:χabc=χbca=χcab,(7)\begin{aligned} \text{2SK, 2SJ, SSK}:&\quad\chi_{abc}=\chi_{acb},\\ \text{QMD, BSJ, BSK}:&\quad\chi_{abc}=-\chi_{cba},\\ \text{Drude}:&\quad\chi_{abc}=\chi_{bca}=\chi_{cab}, \tag*{(7)} \end{aligned}

where {a,b,c}∈{x,y,z}\{a,b,c\} \in\{x,y,z\}. We can use the symmetry properties to determine the nonzero nonlinear conductivity elements χabc\chi_{abc} for all the crystals classified by the magnetic point groups, as shown in Table II for 2D cases. Compared to the point groups, the magnetic point groups [56] can also describe crystals without T\mathcal{T} symmetry.

Note that the QMD mechanism [57, 58] has fewer nonzero elements than the 2SK, 2SJ, and SSK mechanisms, because of the antisymmetric constraint χabc=−χcba\chi_{abc}=-\chi_{cba}. The unstrained [11] and strained [10] MnBi2_2Te4_4 thin films are classified in the 3ˉ′m′\bar{3}'m' and 2/m′2/m' magnetic point groups, respectively.

Groups2SK/2SJ/SSK/DrudeQMD/BSJ/BSK
1ˉ\bar{1}, 2′/m2'/mχxxx\chi_{xxx} χxyy\chi_{xyy}<br>χyxx\chi_{yxx} χyyy\chi_{yyy}χyxx\chi_{yxx} χxyy\chi_{xyy}
2/m′2/m', m′mmm'mmχyxx\chi_{yxx} χyyy\chi_{yyy}χyxx\chi_{yxx}
3ˉ′m\bar{3}'m, 3ˉ′m′\bar{3}'m', 6′/mmm′6'/mmm'χyxx=−χyyy\chi_{yxx}=-\chi_{yyy}×\times
3ˉ′\bar{3}', 6′/m6'/mχxyy=−χxxx\chi_{xyy}=-\chi_{xxx}<br>χyxx=−χyyy\chi_{yxx}=-\chi_{yyy}×\times

Table 2. Symmetry-allowed components of the nonlinear conductivity tensor. Nonzero nonlinear conductivity elements χabb\chi_{abb} on the xx-yy plane (defined as Ja=χabbEb2J_a=\chi_{abb}E_b^2, {a,b}∈{x,y}\{a,b\}\in\{x,y\}) for different mechanisms. In 2D, only 9 out of the 122 magnetic point groups [56] have nonzero elements. In 3D, 20 magnetic point groups have nonzero conductivity elements.

Experimental implications

Our work suggests several potential future directions. The scaling law in Eq. (3) and Table I can be applied to identify mechanisms in future experiments on nonlinear transport. The nonzero elements of nonlinear conductivity in Table II can guide future experiments in more materials. The theory can be applied to quantitatively study nonlinear transport in more systems and application scenarios, such as rectification, piezoelectric, and memory devices.

Derivation of nonlinear conductivity formulas

We briefly describe the calculation of the nonlinear conductivity formulas. We start with the uniform Boltzmann equation [12, 59]

∂fl∂t+k˙⋅∂fl∂k=Iel{fl}(8)\frac{\partial f_l}{\partial t}+\dot{\mathbf{k}}\cdot\frac{\partial f_l}{\partial\mathbf{k}}=I_{\mathrm{el}}\{f_l\} \tag*{(8)}

of the distribution function flf_l, where Iel{fl}I_{\mathrm{el}}\{f_l\} accounts for the elastic disorder scattering, ll stands for the band index γ\gamma and wave vector k\mathbf{k}, k˙=−(e/ℏ)E\dot{\mathbf{k}}=-(e/\hbar)\mathbf{E}, and E\mathbf{E} is the electric field. By decoupling the distribution function and scattering according to different mechanisms (in for disorder-irrelevant, sjsj and sksk for side jump and skew scattering, respectively)

fl=flin+δflsj+δflsk+δfl2sj+δfl2sk+δflsk,sj,f_l=f_l^{\mathrm{in}}+\delta f_l^{sj}+\delta f_l^{sk}+\delta f_l^{2sj}+\delta f_l^{2sk}+\delta f_l^{sk,sj},
Iel{fl}=Iin+Isj+Isk+Isk,sj,(9)I_{\mathrm{el}}\{f_l\}=I^{\mathrm{in}+I^{sj}+I^{sk}+I^{sk,sj},} \tag*{(9)}

flf_l can be found up to the second order of E\mathbf{E}, where δfl2sj+δfl2sk+δflsk,sj\delta f_l^{2sj}+\delta f_l^{2sk}+\delta f_l^{sk,sj} and Isk,sjI^{sk,sj} are crucial for new findings. The nonlinear conductivity χabc\chi_{abc} can be extracted from the electric current density J(E)=−e∑lr˙lfl\mathbf{J}(\mathbf{E})=-e\sum_l\dot{\mathbf{r}}_l f_l, where the velocity

r˙l=vl−k˙×(Ωl+∇k×GE)+vlsj(10)\dot{\mathbf{r}}_l=\mathbf{v}_l-\dot{\mathbf{k}}\times\left(\mathbf{\Omega}_l+\nabla_{\mathbf{k}}\times\mathbf{G}\mathbf{E}\right)+\mathbf{v}_l^{sj} \tag*{(10)}

includes the terms from the group velocity vl\mathbf{v}_l, Berry curvature Ω\mathbf{\Omega} [50], Berry connection polarizability G\mathbf{G}, and SJ velocity vsj\mathbf{v}^{sj}.

MechanismNonlinear conductivity formula
QMDχQMD=e2∑l(vlaGlcb−vlcGlab)∂elfl(0)\chi^{\mathrm{QMD}}=e^2\sum_l(v_l^aG_l^{cb}-v_l^cG_l^{ab})\partial_{e_l}f_l^{(0)} [1, 8, 9, 60, 61]
DrudeχDrude=−τ2e32ℏ2∑lvla∂kb∂kcfl(0)\chi^{\mathrm{Drude}}=-\frac{\tau^2e^3}{2\hbar^2}\sum_l v_l^a\partial_k^b\partial_k^cf_l^{(0)} [2]
BSKχ1BSK=τ2e32ℏ2∑ll′εacdΩldvl(3A)∂kbfl(0)\chi_1^{\mathrm{BSK}}=\frac{\tau^2e^3}{2\hbar^2}\sum_{ll'}\varepsilon^{acd}\Omega_l^d v_l^{(3A)}\partial_k^bf_l^{(0)} [33]
BSKχ2BSK=τ2e32ℏ2∑ll′εacdΩldvl(4A)∂kbfl(0)\chi_2^{\mathrm{BSK}}=\frac{\tau^2e^3}{2\hbar^2}\sum_{ll'}\varepsilon^{acd}\Omega_l^d v_l^{(4A)}\partial_k^bf_l^{(0)}
BSJχBSJ=τe32ℏ2∑lεacdΩldvlsj,b∂elfl(0)\chi^{\mathrm{BSJ}}=\frac{\tau e^3}{2\hbar^2}\sum_l\varepsilon^{acd}\Omega_l^d v_l^{sj,b}\partial_{e_l}f_l^{(0)}
2SKχ12SK=e3τ22ℏ2∑ll′l′′(∂kavll′′)(vll′′A∂kbfk′l(0)\chi_1^{\mathrm{2SK}}=\frac{e^3\tau^2}{2\hbar^2}\sum_{ll'l''}(\partial_k^av_{ll''})(v_{ll''}^A\partial_k^bf_{k'l}^{(0)}
2SKχ22SK=e3τ22ℏ2∑ll′l′′(vll′′A∂kcvll′′A−∂kcvll′′A)vll′′A∂kbfl(0)\chi_2^{\mathrm{2SK}}=\frac{e^3\tau^2}{2\hbar^2}\sum_{ll'l''}(v_{ll''}^A\partial_k^cv_{ll''}^A-\partial_k^cv_{ll''}^A)v_{ll''}^A\partial_k^bf_l^{(0)}
2SJχ12SJ=τ2e32ℏ3∑ll′(vla′+vla)∂cvlsj,b∂elfl(0)\chi_1^{\mathrm{2SJ}}=\frac{\tau^2e^3}{2\hbar^3}\sum_{ll'}(v_l^{a'}+v_l^a)\partial_{c}v_l^{sj,b}\partial_{e_l}f_l^{(0)}
2SJχ22SJ=τ2e32ℏ3∑ll′(vlsj,a+vlsj,a)∂cvlsj,b∂kbfl(0)\chi_2^{\mathrm{2SJ}}=\frac{\tau^2e^3}{2\hbar^3}\sum_{ll'}(v_l^{sj,a}+v_l^{sj,a})\partial_c v_l^{sj,b}\partial_k^bf_l^{(0)}
2SJχ32SJ=−τ2e32ℏ3∑l∂kbvlsj,avlsj,b∂elfl(0)\chi_3^{\mathrm{2SJ}}=-\frac{\tau^2e^3}{2\hbar^3}\sum_l\partial_k^bv_l^{sj,a}v_l^{sj,b}\partial_{e_l}f_l^{(0)}
SSKχ1SSK=τ2e32ℏ3∑ll′(vla+vla)∂cvlsj,b∂kbfl(0)\chi_1^{\mathrm{SSK}}=\frac{\tau^2e^3}{2\hbar^3}\sum_{ll'}(v_l^a+v_l^a)\partial_c v_l^{sj,b}\partial_k^bf_l^{(0)}
SSKχ2SSK=τ2e32ℏ3∑ll′l′′(vll′′a+vll′′A)∂kavll′′A∂kbfl(0)\chi_2^{\mathrm{SSK}}=\frac{\tau^2e^3}{2\hbar^3}\sum_{ll'l''}(v_{ll''}^a+v_{ll''}^A)\partial_k^av_{ll''}^A\partial_k^bf_l^{(0)}
SSKχ3SSK=τ2e32ℏ3∑ll′(vl′avl′sj,b)(∂ka−∂kc)vlA∂kbfl(0)\chi_3^{\mathrm{SSK}}=\frac{\tau^2e^3}{2\hbar^3}\sum_{ll'}(v_{l'}^a v_{l'}^{sj,b})(\partial_k^a-\partial_k^c)v_l^A\partial_k^bf_l^{(0)}
SSKχ4SSK=τ2e32ℏ3∑ll′vl′sj,a(∂ka−∂kc)vlA∂kbfl(0)\chi_4^{\mathrm{SSK}}=\frac{\tau^2e^3}{2\hbar^3}\sum_{ll'}v_{l'}^{sj,a}(\partial_k^a-\partial_k^c)v_l^A\partial_k^bf_l^{(0)}

Table 3. Nonlinear conductivity formulas at the quantum metric order. Formulas of the nonlinear conductivity at quantum-metric order, including QMD, Drude, BSK, BSJ, 2SJ, 2SK, and SSK. The hierarchy and physical pictures of them are illustrated in Figure 1. The quantities and symbols are defined below Eq. (11). The conductivity formulas are also given in Ref. [49].

The nonlinear conductivity formula at quantum-metric order in Eq. (2) can be decomposed into

χabc=∑i=12χi2SK+∑i=13χi2SJ+∑i=14χiSSK+χBSJ+∑i=12χiBSK+χDrude+χQMD.(11)\chi_{abc}=\sum_{i=1}^{2}\chi_i^{2\mathrm{SK}}+\sum_{i=1}^{3}\chi_i^{2\mathrm{SJ}}+\sum_{i=1}^{4}\chi_i^{\mathrm{SSK}}+\chi^{\mathrm{BSJ}}+\sum_{i=1}^{2}\chi_i^{\mathrm{BSK}}+\chi^{\mathrm{Drude}}+\chi^{\mathrm{QMD}}. \tag*{(11)}

Their explicit forms are given in Table III, where −e-e is the electron charge, the scattering time τ\tau is defined as

1τ≈1τk≡∑k′ωk′k(2)[1−cos⁡(ϕ−ϕ′)]δ(ϵF−ϵl).(12)\frac{1}{\tau}\approx\frac{1}{\tau_{\mathbf{k}}}\equiv\sum_{\mathbf{k}'}\omega_{\mathbf{k}'\mathbf{k}}^{(2)}\left[1-\cos\left(\phi-\phi'\right)\right]\delta(\epsilon_{\mathrm{F}}-\epsilon_l). \tag*{(12)}

εabc\varepsilon^{abc} is the antisymmetric tensor, the Fermi distribution fl(0)={exp⁡[(ϵl−ϵF)/kBT]+1}−1f_l^{(0)}=\{\exp[(\epsilon_l-\epsilon_F)/k_BT]+1\}^{-1}, with the Fermi energy ϵF\epsilon_F, ll stands for (γ,k)(\gamma,\mathbf{k}), with the band index γ\gamma and wave vector k=∣k∣(cos⁡ϕ,sin⁡ϕ)\mathbf{k}=|\mathbf{k}|(\cos\phi,\sin\phi) in 2D, the Berry curvature [50]

Ωla≡−2εabc∑γ′≠γIm⁡⟨γ∣∂kbH^∣γ′⟩⟨γ′∣∂kcH^∣γ⟩(ϵkγ−ϵkγ′)2,(13)\Omega_l^a\equiv-2\varepsilon^{abc}\sum_{\gamma'\ne\gamma}\frac{\operatorname{Im}\langle\gamma|\partial_{k_b}\hat{H}|\gamma'\rangle\langle\gamma'|\partial_{k_c}\hat{H}|\gamma\rangle}{(\epsilon_k^\gamma-\epsilon_k^{\gamma'})^2}, \tag*{(13)}

∂kab≡∂/∂kb\partial_k^{ab}\equiv\partial/\partial k_b, H^\hat{H} is the Hamiltonian, ϵl\epsilon_l is the eigenenergy, group velocity vla=(1/ℏ)∂ϵl/∂kav_l^a=(1/\hbar)\partial\epsilon_l/\partial k_a, ∂ϵl≡∂/∂ϵl\partial_{\epsilon_l}\equiv\partial/\partial\epsilon_l, ∂ϵlfl(0)\partial_{\epsilon_l}f_l^{(0)} means summing those states near the Fermi surface. The SJ velocity vlsj,a=∑l′ϖll′Sδrll′av_l^{\mathrm{sj},a}=\sum_{l'}\varpi_{ll'}^S\delta r_{ll'}^a, ϖll′S\varpi_{ll'}^S (ϖll′A\varpi_{ll'}^A) is the symmetric (antisymmetric) scattering rate between states ll and l′l', the coordinates shift

δrll′a≡i⟨l∣∂ka∣l⟩−i⟨l′∣∂ka∣l′⟩−(∂ka+∂k′a)arg⁡(Vll′),(14)\delta r_{ll'}^a\equiv i\langle l|\partial_{k_a}|l\rangle-i\langle l'|\partial_{k_a}|l'\rangle-(\partial_k^a+\partial_{k'}^a)\arg(V_{ll'}), \tag*{(14)}

with Vll′=⟨l∣V^imp∣l′⟩V_{ll'}=\langle l|\hat{V}_{\mathrm{imp}}|l'\rangle [12, 59], where the δ\delta-correlated random potential V^imp(r)=∑iViδ(r−Ri)\hat{V}_{\mathrm{imp}}(\mathbf{r})=\sum_iV_i\delta(\mathbf{r}-\mathbf{R}_i) can give the Gaussian ⟨Vi2⟩dis=V02\langle V_i^2\rangle_{\mathrm{dis}}=V_0^2, and non-Gaussian correlations ⟨Vi3⟩dis=V13\langle V_i^3\rangle_{\mathrm{dis}}=V_1^3 [12, 14, 59], leading to the intrinsic SK ϖll′(4A)\varpi_{ll'}^{(4A)} and extrinsic SK ϖll′(3A)\varpi_{ll'}^{(3A)} parts to

ϖll′A=ϖll′3A+ϖll′4A.(15)\varpi_{ll'}^A=\varpi_{ll'}^{3A}+\varpi_{ll'}^{4A}. \tag*{(15)}

Oˉll′a\bar{O}_{ll'}^a (O~ll′a\tilde{O}_{ll'}^a) is the symmetric (antisymmetric) part of [12]

Oll′a≡(2π/ℏ)∣Tll′∣2δrll′a∂ϵlδ(ϵl−ϵl′),(16)O_{ll'}^a\equiv(2\pi/\hbar)|T_{ll'}|^2\delta r_{ll'}^a\partial_{\epsilon_l}\delta(\epsilon_l-\epsilon_{l'}), \tag*{(16)}

and Tll′T_{ll'} is the T-matrix [62]. Alternatively, the calculation can be based on the density matrix [48, 63, 64].

Nonlinear conductivity of QMD

In the nonlinear conductivity formula of the QMD mechanism χQMD\chi^{\mathrm{QMD}} in Table III, the Berry connection polarizability tensor reads [1, 8, 9]

Gγ,kab≡2eRe⁡∑γ′≠γAka,γγ′Akb,γ′γ/(ϵkγ−ϵkγ′)(17)\mathcal{G}_{\gamma,\mathbf{k}}^{ab}\equiv2e\operatorname{Re}\sum_{\gamma'\ne\gamma}A_{\mathbf{k}}^{a,\gamma\gamma'}A_{\mathbf{k}}^{b,\gamma'\gamma}/(\epsilon_k^\gamma-\epsilon_k^{\gamma'}) \tag*{(17)}

is related to the quantum metric tensor [37, 38]

gγ,kab≡Re⁡∑γ≠γ′Aka,γγ′Akb,γ′γ,(18)g_{\gamma,\mathbf{k}}^{ab}\equiv\operatorname{Re}\sum_{\gamma\ne\gamma'}A_{\mathbf{k}}^{a,\gamma\gamma'}A_{\mathbf{k}}^{b,\gamma'\gamma}, \tag*{(18)}

where the Berry connection Aka,γγ′≡i⟨γ∣∂ka∣γ′⟩A_{\mathbf{k}}^{a,\gamma\gamma'}\equiv i\langle\gamma|\partial_{k_a}|\gamma'\rangle [50]. For two-band systems, they are explicitly related as

Gγ,kab=2egγ,kab/(ϵkγ−ϵkγ′).(19)\mathcal{G}_{\gamma,\mathbf{k}}^{ab}=2eg_{\gamma,\mathbf{k}}^{ab}/(\epsilon_k^\gamma-\epsilon_k^{\gamma'}). \tag*{(19)}

Symmetry of nonlinear conductivity formulas

In Eq. (17), the velocity vv is odd under both T\mathcal{T} and P\mathcal{P} operations, while the Berry curvature polarizability G\mathcal{G} is even under both T\mathcal{T} and P\mathcal{P} operations, so vGv\mathcal{G} is odd under both T\mathcal{T} and P\mathcal{P} operations but even under the joint PT\mathcal{PT} symmetry. Therefore, to have a nonzero χQMD\chi^{\mathrm{QMD}}, both the T\mathcal{T} and P\mathcal{P} must be broken, while χQMD\chi^{\mathrm{QMD}} can survive the PT\mathcal{PT} symmetry. We can use Table IV to check that all formulas in Table III have the same symmetries of χQMD\chi^{\mathrm{QMD}}.

∂a\partial_avlv_lΩla\Omega_l^aδrll′a\delta r_{ll'}^avl,asjv_{l,a}^{\mathrm{sj}}Oˉll′a\bar{O}_{ll'}^aO~ll′a\tilde{O}_{ll'}^aϖll′S\varpi_{ll'}^Sϖll′A\varpi_{ll'}^A
P\mathcal{P}−-−-++−-−-−-−-++++
T\mathcal{T}−-−-−-++++++−-++−-
PT\mathcal{PT}++++−-−-−-−-++++−-

Table IV. Symmetry properties of quantities in nonlinear conductivity formulas. Whether the quantities in the nonlinear conductivity formulas in Table III change sign (−-) or not (++), under P\mathcal{P}, T\mathcal{T}, and the joint PT\mathcal{PT} symmetry operations.

Take the formula of χSSK\chi^{\mathrm{SSK}} in Table III for example, in which vlsj,a(∂kca−∂kc′a)ϖll′Aδrll′bv_l^{\mathrm{sj},a}(\partial_{k_c}^a-\partial_{k_c'}^a)\varpi_{ll'}^A\delta r_{ll'}^b gives (−1)(−1)(+1)(−1)=−1(-1)(-1)(+1)(-1)=-1 upon P\mathcal{P}, (+1)(−1)(−1)(−1)=−1(+1)(-1)(-1)(-1)=-1 upon T\mathcal{T}, and (−1)(+1)(−1)(+1)=1(-1)(+1)(-1)(+1)=1 under the joint PT\mathcal{PT} operation, so it has the same symmetry of χQMD\chi^{\mathrm{QMD}}. The symmetry of the other formulas can be shown similarly.

Conflict of interest

The authors declare that they have no conflict of interest.

Acknowledgements

We thank Xiangang Wan and Xiaoqn Wang for helpful discussions. This work was supported by the National Key R&D Program of China (2022YFA1403700), Quantum Science and Technology–National Science and Technology Major Project (2021ZD0302400), the National Natural Science Foundation of China (122525401, 12350402, 12374041), Guangdong Basic and Applied Basic Research Foundation (2023B0303000011), Guangdong Provincial Quantum Science Strategic Initiative (GDZX2201001 and GDZX2401001), the Science, Technology and Innovation Commission of Shenzhen Municipality (ZDSYS20190902092905285), High-level Special Funds (G03050K004), and Center for Computational Science and Engineering of SUSTech.

Author contributions

Zhen-Hao Gong did the calculations with assistance from Z. Z. Du, Hai-Peng Sun, and Hai-Zhou Lu; Zhen-Hao Gong, Z. Z. Du, and Hai-Zhou Lu wrote the manuscript with assistance from Hai-Peng Sun and X. C. Xie; Hai-Zhou Lu and X. C. Xie supervised the project.

References

References

  1. [18]D. Kaplan, T. Holder, and B. Yan, General nonlinear Hall current in magnetic insulators beyond the quantum anomalous Hall effect, Nat. Commun. 14, 3053 (2023).DOI
  2. [19]L. Min, H. Tan, Z. Xie, L. Miao, R. Zhang, S. H. Lee, V. Gopalan, C.-X. Liu, N. Alem, B. Yan, et al., Strong room-temperature bulk nonlinear Hall effect in a spin-valley locked Dirac material, Nat. Commun. 14, 364 (2023).DOI
  3. [20]Z. Jin, X. Yao, Z. Wang, H. Y. Yuan, Z. Zeng, W. Wang, Y. Cao, and P. Yan, Nonlinear topological magnon spin Hall effect, Phys. Rev. Lett. 131, 166704 (2023).arxiv.org/abs/2301.03211
  4. [21]T. Yokouchi, Y. Ikeda, T. Morimoto, and Y. Shiomi, Giant magnetochiral anisotropy in Weyl semimetal WTe₂ induced by diverging Berry curvature, Phys. Rev. Lett. 130, 136301 (2023).DOI
  5. [22]M. Huang, Z. Wu, X. Zhang, X. Feng, Z. Zhou, S. Wang, Y. Chen, C. Cheng, K. Sun, Z. Y. Meng, and N. Wang, Intrinsic nonlinear Hall effect and gate-switchable Berry curvature sliding in twisted bilayer graphene, Phys. Rev. Lett. 131, 066301 (2023).DOI
  6. [23]Y. Fang, J. Cano, and S. A. A. Gorashi, Quantum geometry induced nonlinear transport in antiferromagnets, Phys. Rev. Lett. 133, 106701 (2024).DOI
  7. [24]M. Suárez-Rodríguez, B. Martín-García, W. Skowroński, F. Calavalle, S. S. Tsirkin, I. Souza, F. De Juan, A. Chuvilin, A. Fert, M. Gobbi, F. Casanova, and L. E. Hueso, Odd nonlinear conductivity under spatial inversion in chiral tellurium, Phys. Rev. Lett. 132, 046303 (2024).
  8. [25]D. Kaplan, T. Holder, and B. Yan, Unification of nonlinear anomalous Hall effect and nonreciprocal magnetoresistance in metals by the quantum geometry, Phys. Rev. Lett. 132, 026301 (2024).DOI
  9. [26]R. Chen, Z. Z. Du, H.-P. Sun, H.-Z. Lu, and X. C. Xie, Nonlinear Hall effect on a disordered lattice, Phys. Rev. B 110, L081301 (2024).DOI
  10. [27]P. He, H. Isobe, G. K. W. Koon, J. Y. Tan, J. Hu, J. Li, N. Nagaosa, and J. Shen, Third-order nonlinear Hall effect in a quantum Hall system, Nat. Nanotechnol. 19, 1460 (2024).DOI
  11. [28]E. Wang, H. Zeng, W. Duan, and H. Huang, Spontaneous inversion symmetry breaking and emergence of Berry curvature and orbital magnetization in topological ZrTe₅ films, Phys. Rev. Lett. 132, 266802 (2024).DOI
  12. [29]P. Makushko, S. Kovalev, Y. Zabila, I. Ilyakov, A. Ponomaryov, A. Arshad, G. L. Prajapati, T. V. de Oliveira, J.-C. Deinert, P. Chekhonin, et al., A tunable room-temperature nonlinear Hall effect in elemental bismuth thin films, Nat. Electron. 7, 207 (2024).DOI
  13. [30]J.-M. Lihm and C.-H. Park, Nonlinear Hall effect from long-lived valley-polarizing relaxons, Phys. Rev. Lett. 132, 106402 (2024).DOI
  14. [31]H. Isobe, S.-Y. Xu, and L. Fu, High-frequency rectification via chiral Bloch electrons, Sci. Adv. 6, eaay2497 (2020).
  15. [32]D. Kumar, C.-H. Hsu, R. Sharma, T.-R. Chang, P. Yu, J. Wang, G. Eda, G. Liang, and H. Yang, Room-temperature nonlinear Hall effect and wireless radiofrequency rectification in Weyl semimetal TaIrTe₄, Nat. Nanotechnol. 16, 421 (2021).DOI
  16. [33]D. Ma, A. Arora, G. Vignale, and J. C. W. Song, Anomalous skew-scattering nonlinear Hall effect and chiral photocurrents in PT-symmetric antiferromagnets, Phys. Rev. Lett. 131, 076601 (2023).DOI
  17. [34]B. Ghosh, Y. Onishi, S.-Y. Xu, H. Lin, L. Fu, and A. Bansil, Probing quantum geometry through optical conduc-

Paper details

vlnc:W_b23xacct
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents