betaFeedback

WorksPhysics and Astronomy

Scaling of factorial moments in cumulative variables

Abstract

A search for power-law fluctuations within the framework of the intermittency method is ongoing to locate the critical point of the strongly interacting matter. In particular, experimental data on proton and pion production in heavy-ion collisions are analyzed in transverse-momentum, pTp_T, space. In this regard, we have studied the dependence of the second scaled factorial moment F2F_2 of particle multiplicity distribution on the number of subdivisions of transverse momentum-interval used in the analysis. The study is performed using a simple model with a power-law two-particle correlation function in pTp_T. We observe that F2F_2 values depend on the size and position of the pTp_T interval. However, when we convert the non-uniform transverse-momentum distribution to uniform one using cumulative transformation, F2F_2 calculated in subdivisions of the cumulative pTp_T becomes independent of the cumulative-pTp_T interval. The scaling behaviour of F2F_2 for the cumulative variable is observed. Moreover, F2F_2 follows a power law with the number of subdivisions of the cumulative-pTp_T interval with the intermittency index close to the correlation function's exponent.

Introduction

One of the central issues in high-energy heavy-ion physics is to locate the critical point (CP) in the phase diagram of the strongly interacting matter. Theoretical studies suggest that there should be a smooth crossover transition between the hadronic phase and quark-gluon plasma (QGP) at high temperature TT and zero baryon chemical potential μB\mu_{\mathrm{B}} [1]. A first-order phase transition is expected at small TT and large μB\mu_{\mathrm{B}} [2]. The CP is when the first-order phase transition line ends and has properties of second-order phase transition. Experiments at the CERN SPS and BNL RHIC are ongoing to search for the CP [5] [3, 4]. In future, there will be similar programmes in the Nuclotron-based Ion Collider Facility (NICA) at JINR, Dubna and the Compressed Baryonic Matter (CBM) experiment at the Facility for Antiproton and Ion Research (FAIR) at GSI, Darmstadt [6]. To find the CP, a search for power-law fluctuations within the framework of an intermittency method was proposed [7, 8, 9, 10]. Experimental data on proton and pion multiplicity fluctuations are analyzed in transverse momentum, pTp_T, space [11, 12, 13].

In this paper, we will show that when using the so-called cumulative transverse momentum for intermittency studies, the CP signal is independent of the size and location of the pTp_T interval used in the analysis. The paper is organized as follows. In § 1 A we will briefly discuss the intermittency method. In § 2 we present the results and finally, in § 3 we summarize and conclude the paper.

Intermittency and scaling behaviour near CP

In the intermittency method, observable of interest is the scaled factorial moment of particle multiplicity distribution. Its dependence on the number of subdivisions of momentum space is studied. The qq-th order scaled factorial moment is defined as follows:

Fq(M)=⟨1MD∑i=1MDni(ni−1)…(ni−q+1)⟩⟨1MD∑i=1MDni⟩q(1)F_q(M)=\frac{\left\langle\frac{1}{M^D}\sum_{i=1}^{M^D}n_i(n_i-1)\ldots(n_i-q+1)\right\rangle}{\left\langle\frac{1}{M^D}\sum_{i=1}^{M^D}n_i\right\rangle^q} \tag*{(1)}

where DD is the dimension of the momentum space, MDM^D is the number of equally sized subdivisions of the DD–dimensional space, nin_i is the number of particles in ii–th subdivision. Here ⟨⋯ ⟩\langle\cdots\rangle denotes the average is over the events. At the critical point, the scaled factorial moment is expected to show a power-law dependence

Fq(M)=(MD)ϕq(2)F_q(M) = (M^D)^{\phi_q} \tag*{(2)}

when MDM^D is sufficiently large. The corresponding intermittency indices ϕq\phi_q are expected to follow the relation

ϕq=q−1Ddq,(3)\phi_q = \frac{q-1}{D}d_q, \tag*{(3)}

where dqd_q is the anomalous fractal dimension [14].

The present work aims to study the dependence of the intermittency CP signal on the momentum interval selected for the analysis. For this purpose, a simple model is developed with a power-law two-particle correlation function. For the simplicity we will consider a one dimensional momentum space (D=1D = 1) and, thus, a two-particle distribution function of the form:

ρ(X1,X2)=ρ(X1)ρ(X2)∣X1−X2∣ϕ2+ϵ,(4)\rho(X_1, X_2) = \frac{\rho(X_1)\rho(X_2)}{\lvert X_1-X_2\rvert^{\phi_2}+\epsilon}, \tag*{(4)}

where ρ(X)\rho(X) is a single particle distribution in XX. Furthermore we assume that XX stands for dimensionless transverse momentum X≡pT/(1 GeV/c)X \equiv p_T/(1\ \mathrm{GeV}/c) and it is distributed as

ρ(X)=CXe−6X,(5)\rho(X) = CXe^{-6X}, \tag*{(5)}

where CC is a normalization constant. The ϕ2\phi_2 in Eq. (4) is the correlation function exponent. Throughout the analysis, we have taken ϕ2=0.8\phi_2 = 0.8 as suggested by a CP model for protons [15]. At the denominator of Eq. (4) a small number ϵ\epsilon (=10−6= 10^{-6}) is added to avoid singularity for X1=X2X_1 = X_2.

In the left panel of Fig. ,Figure 1 we show a distribution of XX, which follows Eq. (5). Here, we have used 180 thousand events with one correlated pair per event. Particles are generated within the XX range 0-1. Two particle distribution function following Eq. (4) is shown in the right panel of Figure 1. Due to the strong correlation, most particles are produced near the line X1=X2X_1 = X_2.

Distribution of $X$ and two-particle distribution in the $X_1$–$X_2$ plane

Figure 1. Distribution of XX given by Eq. (5) (left) and two particle distribution in X1−X2X_1-X_2 plane generated according to Eq. (4) (right).

The second scaled factorial moment can be expressed by a mean number of particle pairs as

F2(M)=2M⟨N⟩2⟨Npp(M)⟩,(6)F_2(M) = \frac{2M}{\langle N\rangle^2}\langle N_{pp}(M)\rangle, \tag*{(6)}

where NN and NppN_{pp} are respectively multiplicity and the total number of particle pairs in all MM subdivisions for a given event.

Results

In the left panel of Figure 2 we have shown F2F_2 as MM for different XX intervals. Here F2F_2 is calculated in subdivisions of a given interval of XX. Data is generated independently for each XX interval. The first three data sets lower limit of XX is kept fixed at zero while the upper limits are 0.25, 0.5 and 1, respectively. For other two data sets XX intervals are (0.25, 0.5) and (0.1, 0.2). F2F_2 at each MM is calculated from 10000 independent events, where each event consists of one correlated pair. F2F_2 is calculated at 18 different MM. For each XX interval, we have used 180 thousand independent events. Statistical uncertainty of F2F_2 is calculated using the standard error propagation technique. At M=1M = 1, F2F_2 is 0.5 for each set since the number of pairs is one in each event. Further, F2F_2 increases with the increase of MM. For M>1M > 1, values of F2F_2’s are different for different XX intervals. To quantify these differences, we have also calculated the ratio of F2F_2 at a particular XX interval to a reference F2F_2 obtained in the interval (0, 1). Note that different event sets are used to calculated the numerator and the denominator of this ratio to avoid correlation between results. Ratios are shown in the right panel of Figure 2. Other than a line at 1, two more lines at 1.05 and 0.95 are drawn to indicate ±5\pm5 % deviation from the reference F2(M)F_2(M). We observe that for all XX intervals, the deviation is greater than 5% for M>1M > 1. Note that the distribution of XX considered in this work is highly non-uniform, shown in Figure 1 (left).

Figure 2. Left: Dependence of F2(M)F_2(M) on MM for different intervals of transverse momentum XX. Here F2(M)F_2(M) is calculated in subdivisions of XX. Right: Ratio of F2(M)F_2(M) calculated for a given interval of XX to a reference F2(M)F_2(M) calculated for the XX interval (0,1)(0, 1).

Next we have analysed dependence of F2F_2 on MM for subdivisions in cumulative XX [16] defined as:

QX=∫aXρ(X)dX∫abρ(X)dX,(7)Q_X = \frac{\int_a^X \rho(X)dX}{\int_a^b \rho(X)dX}, \tag*{(7)}

where aa and bb are respectively the lower and upper limits of interval in XX.

According to Eq. (7), QXQ_X varies between zero to one and its distribution is uniform. The dependence of QXQ_X on XX is shown in Figure 3 (left). As cross-check of the transformation Figure 3 (right) shows the uniform distribution of QXQ_X.

Dependence of $Q_X$ on $X$ and uniform distribution of $Q_X$

Figure 3. Left: Dependence of QXQ_X on XX. Right: Uniform distribution of QXQ_X.

We have calculated F2F_2 for subdivisions in QXQ_X, and the two-particle distribution is as previously given in X1X_1 and X2X_2. The left panel of Figure 4 shows the dependency of F2F_2 on MM for different XX intervals. We observe that F2F_2’s are almost the same for all tested XX intervals. The ratio of F2F_2 in a particular XX interval to a reference F2F_2 are shown in Figure 4 (right). We observe that the ratios for different XX intervals are consistent with each other and with the reference line within statistical uncertainties. Thus F2(M)F_2(M) calculated in the cumulative variable is independent of interval in XX selected for the analysis - the scaling of F2(M)F_2(M) in MM is observed. One may expect a scaling violation at larger MM due to a non-zero value of the parameter ϵ\epsilon in Eq. (4) needed to avoid singularity at X1=X2X_1 = X_2.

Figure 4. Same as in Figure 2 but for subdivisions of cumulative transverse momentum QXQ_X.

Extraction of two-particle distribution function exponent

Finally we have fitted the F2F_2 dependence on MM for the XX interval (0, 1) with a power-law function:

f(M)=α1Mφ2+α2(8)f(M) = \alpha_1 M^{\varphi_2} + \alpha_2 \tag*{(8)}

where α1\alpha_1, α2\alpha_2 and φ2\varphi_2 are parameters.For the fitting purpose we use 17 points within the MM range 2-2000. The fitted data and function are shown in Figure 5. The χ2\chi^2/ndf of the fitting is ≈0.6\approx0.6. The extracted power φ2≈0.77\varphi_2 \approx0.77 (intermittency index) is close to the exponent 0.8, used to generate correlated pairs.

Figure 5. Dependence of F2(M)F_2(M) on MM for subdivisions in cumulative variable for the XX interval (0, 1) fitted by the power-law function, Eq. (8).

Summary and conclusion

This work is motivated by experimental searches for the critical point of the strongly interacting matter in heavy-ion collisions. We have introduced a model with a power-law two-particle distribution function in dimensionless transverse momentum XX. We have studied the behaviour of the second scaled factorial moment F2F_2 as a function of the number of subdivisions MM of XX. The non-uniform distribution of XX F2(M)F_2(M) depends on the interval in XX selected for the analysis. However, once we convert the non-uniform distribution to a uniform distribution using cumulative variable QXQ_X and calculated F2F_2 in subdivisions of QXQ_X, The scaling behaviour of F2(M)F_2(M) in MM is observed. Further, we have fitted dependence of F2(M)F_2(M) on MM with the power-law function α1Mφ2+α2\alpha_1 M^{\varphi_2}+\alpha_2 and observed that the resulting intermittency index φ2\varphi_2 is close to the exponent ϕ2\phi_2 of the two-particle distribution function.

In a real experiment, F2F_2 will be affected by many biasing effects like detector efficiency, resolution etc. In Ref. [17], we have shown that F2F_2 is significantly modified by the effect of detector resolution. Usually, the particle detection efficiency is less than 100%, and it may depend on transverse momentum [18] [4]. In future, we plan to study the effect of detector efficiency on F2F_2.

Acknowledgments

This work was supported by the Polish National Agency for Academic Exchange through Ulam Scholarship with Agreement No: PPN/ULM/2019/1/00093/U/00001, the Polish National Science Centre grant 2018/30/A/ST2/00226 and the German Research Foundation grant GA1480/8-1.

References

References

  1. [5]X. Luo and N. Xu, “Search for the QCD Critical Point with Fluctuations of Conserved Quantities in Relativistic Heavy-Ion Collisions at RHIC : An Overview,” Nucl. Sci. Tech., vol. 28, no. 8, p. 112, 2017.
  2. [6]T. Ablyazimov et al., “Challenges in QCD matter physics –The scientific programme of the Compressed Baryonic Matter experiment at FAIR,” Eur. Phys. J. A, vol. 53, no. 3, p. 60, 2017.DOI
  3. [7]A. Bialas and R. B. Peschanski, “Moments of Rapidity Distributions as a Measure of Short Range Fluctuations in High-Energy Collisions,” Nucl. Phys. B, vol. 273, pp. 703–718, 1986.DOI
  4. [8]A. Bialas and R. B. Peschanski, “Intermittency in Multiparticle Production at High-Energy,” Nucl. Phys. B, vol. 308, pp. 857–867, 1988.DOI
  5. [9]H. Satz, “Intermittency and Critical Behavior,” Nucl. Phys. B, vol. 326, pp. 613–618, 1989.
  6. [10]S. Gupta, P. La Cock, and H. Satz, “The Search for intermittency in the finite size Ising model,” Nucl. Phys. B, vol. 362, pp. 583–598, 1991.
  7. [11]T. Anticic et al., “Critical fluctuations of the proton density in A+A collisions at 158A GeV,” Eur. Phys. J. C, vol. 75, no. 12, p. 587, 2015.
  8. [12]T. Anticic et al., “Search for the QCD critical point in nuclear collisions at the CERN SPS,” Phys. Rev. C, vol. 81, p. 064907, 2010.DOI
  9. [13]N. Davis, “Searching for the Critical Point of Strongly Interacting Matter in Nucleus–Nucleus Collisions at CERN SPS,” Acta Phys. Polon. Supp., vol. 13, no. 4, pp. 637–643, 2020.arxiv.org/abs/2002.06636
  10. [14]E. De Wolf, I. Dremin, and W. Kittel, “Scaling laws for density correlations and fluctuations in multiparticle dynamics,” Phys. Rept., vol. 270, pp. 1–141, 1996.
  11. [15]N. G. Antoniou, F. K. Diakonos, A. S. Kapoyannis, and K. S. Kousouris, “Critical opalescence in baryonic QCD matter,” Phys. Rev. Lett., vol. 97, p. 032002, 2006.DOI
  12. [16]A. Bialas and M. Gazdzicki, “A New variable to study intermittency,” Phys. Lett. B, vol. 252, pp. 483–486, 1990.DOI
  13. [17]S. Samanta, T. Czopowicz, and M. Gazdzicki, “Impact of momentum resolution on factorial moments due to power-law correlations between particles,” 5 2021.DOI
  14. [18]N. Abgrall et al., “NA61/SHINE facility at the CERN SPS: beams and detector system,” JINST, vol. 9, p. P06005, 2014.

Paper details

vlnc:W_b5zkh383
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents