betaFeedback

WorksPhysics and Astronomy

Geometry-dependent Ekman layer approximations on curved domains: L^{\infty} convergence

Abstract

The Ekman boundary layer is a fundamental concept in fluid dynamics that describes fluid motion near boundaries affected by Earth's rotation. Most theoretical studies have simplified their analysis by assuming a planar boundary surface, resulting in limited exploration of structures with general smooth boundary conditions. Investigating the impact of boundary geometry in the Ekman boundary layer is essential, as initially suggested by J.L. Lions and further examined in Masmoudi's study [Comm. Pure Appl. Math. 53 (2000), 432-483] under small amplitude periodic boundary conditions. This paper clarifies how boundary geometry influences flow fields and characterizes its effects on near-boundary layer flow. We construct a class of multi-scale approximate solutions based on the boundary's geometric features and establish their convergence in the L^{\infty} framework. Our findings do not require a small-amplitude assumption, only an upper bound on the Gaussian curvature of the boundary surface. Notably, when the boundary is planar, our approach aligns with existing studies. Additionally, in the vanishing-viscosity limit, we derive a limiting-state system dependent on boundary geometric parameters. These contributions extend the theoretical understanding of boundary-layer interactions to general curved geometries and have possible applications in atmospheric, oceanic, and other geophysical flow contexts.

Introduction

This paper is concerned with the geophysical fluid dynamics under rotation, described by the following system:

∂tuε−μhΔhuε−μv∂z2uε+(uε⋅∇)uε+ε−1Ruε+ε−1∇pε=0,∇⋅uε=0,(1)\begin{aligned} \partial_t \mathbf{u}^{\varepsilon} - \mu_h \Delta_h \mathbf{u}^{\varepsilon} - \mu_v \partial_z^2 \mathbf{u}^{\varepsilon} + (\mathbf{u}^{\varepsilon} \cdot\nabla)\mathbf{u}^{\varepsilon} + \varepsilon^{-1} R\mathbf{u}^{\varepsilon} + \varepsilon^{-1} \nabla p^{\varepsilon} &= 0, \\ \nabla\cdot\mathbf{u}^{\varepsilon} &= 0, \tag*{(1)} \end{aligned}

where (t,x)∈R+×Ω(t,\mathbf{x}) \in\mathbb{R}^{+} \times\Omega, with Ω\Omega being a domain of R3\mathbb{R}^{3} with smooth boundary, and Δh\Delta_h is defined as the horizontal Laplacian operator. Here, uε,pε,μh=μh(ε)>0\mathbf{u}^{\varepsilon}, p^{\varepsilon}, \mu_h = \mu_h(\varepsilon) > 0, and μv=μv(ε)>0\mu_v = \mu_v(\varepsilon) > 0 denote the velocity, pressure of the fluid, horizontal and vertical viscosity coefficients, respectively. The Coriolis force RuεR\mathbf{u}^{\varepsilon}, essential in rotating fluid systems, is incorporated as

Ruε=(0−10100000)uε.R\mathbf{u}^{\varepsilon} = \begin{pmatrix} 0 & -1 & 0 \\ 1 & 0 & 0 \\ 0 & 0 & 0 \end{pmatrix} \mathbf{u}^{\varepsilon}.

For the system (1), the initial and boundary conditions read as

uε(t,x,y,z)∣t=0=u0ε(x,y,z),(2)\mathbf{u}^{\varepsilon}(t,x,y,z)\big|_{t=0} = \mathbf{u}^{\varepsilon}_0(x,y,z), \tag*{(2)}
uε(t,x,y,z)∣∂Ω=0.(3)\mathbf{u}^{\varepsilon}(t,x,y,z)\big|_{\partial\Omega} = 0. \tag*{(3)}

Due to the axisymmetric structure of RuεR\mathbf{u}^{\varepsilon} and following a standard procedure, there exists a weak solution pair (uε,pε)(\mathbf{u}^{\varepsilon}, p^{\varepsilon}) for the system (1)-(3) when u0ε∈L2(Ω)\mathbf{u}^{\varepsilon}_0 \in L^2(\Omega) (see Ref. [2]).

The Ekman boundary layer (see Refs. [19] [11]) is a thin layer of fluid that forms adjacent to a boundary in a rotating fluid and is characterized by friction dominating the region near the boundary. The Ekman boundary layer’s dynamics are influenced by various factors, including the fluid’s viscosity, topography, wind stress, curvature of the earth, and turbulent frictional stress.

Most investigations in Ekman boundary layer theory rely on the idealized assumption of a flat boundary (see Refs. [2, 8, 9, 12, 15, 18]). However, natural boundaries often exhibit complex characteristics, featuring diverse seabed topographies and irregular landforms. In the general domain Ω\Omega, many unresolved mathematical challenges remain (Chemin et al. [2]). Analyzing boundary layers in non-flat cases is significantly more complex than in flat cases due to varying normal directions caused by boundary curvature, which complicates the determination of boundary layer thickness [7]. The Ekman boundary layer’s complexity is heightened under non-flat geometries. Even for geometrically favorable shapes like spherical shells, Stewartson [22] found that boundary layer thicknesses (ε1/3,ε1/4,ε2/7,…\varepsilon^{1/3}, \varepsilon^{1/4}, \varepsilon^{2/7}, \ldots) vary with latitude. Additionally, Rousset [21] provided approximate boundary layer solutions for well-posed initial values in regions of the unit sphere away from the equator.

Non-flat boundary geometric features can significantly impact boundary layer solutions, a concept first proposed by J. L. Lions and further explored by Masmoudi. In his seminal work [18], Masmoudi analyzed the Ekman boundary layer solution in the domain T2×[εB(x,y),1]\mathbb{T}^{2} \times[\varepsilon B(x,y),1], where ε\varepsilon is a small positive parameter and B(x,y)B(x,y) is a periodic smooth function. He established convergence results within the L2L^{2} framework, dependent on small boundary amplitude. Subsequent studies have continued to investigate boundary layers, as noted in Refs. [1, 3, 4, 6, 20]. For the Prandtl boundary layer, Liu and Wang [16], utilized curvilinear coordinate systems and multi-scale analysis to study the boundary layer theory of the incompressible Navier-Stokes equations within a two-dimensional curved bounded domain.

Recently, in Ref. [13], the authors extended the analysis to more general non-flat boundary geometries by removing the restriction of small boundary amplitude. Specifically, for the domain Ω=R2×[B(x,y),B(x,y)+2]\Omega= \mathbb{R}^{2} \times[B(x,y), B(x,y)+2] with B(x,y)∈C∞(R2)B(x,y) \in C^{\infty}(\mathbb{R}^{2}), they justified L2L^{2}-convergence under certain geometry curvature constraints on the boundary surface.

To facilitate compare the results of flat and non-flat boundary cases, we summarize two related key findings for the flat boundary case below:

Theorem 1 (Grenier and Masmoudi [12]) Let Ω=T2×[0,1]\Omega= \mathbb{T}^{2} \times[0,1], (uε,pε)(u^{\varepsilon},p^{\varepsilon}) be a pair of global weak solutions of system (1)-(3) with initial data u0εu_{0}^{\varepsilon}. Assume u0εu_{0}^{\varepsilon} strongly converges to u0(x,y)=(u0,h,0)u_{0}(x,y)=(u_{0,h},0) in L2(Ω)L^{2}(\Omega), with ∫T2u0,h=0\int_{\mathbb{T}^{2}} u_{0,h}=0. Then following cases hold:

  1. Anisotropic case with μh∼O(1)\mu_{h}\sim O(1), μv∼O(ε)\mu_{v}\sim O(\varepsilon):

Assume u0∈H1(T2)u_{0}\in H^{1}(\mathbb{T}^{2}), then

uε−u→0+in L∞(R+;L2(Ω)),u^{\varepsilon}-u \to0^{+}\quad\text{in }L^{\infty}(\mathbb{R}_{+};L^{2}(\Omega)),
∇h(uε−u)→0+in L2(R+;L2(Ω)),\nabla_{h}(u^{\varepsilon}-u)\to0^{+}\quad\text{in }L^{2}(\mathbb{R}_{+};L^{2}(\Omega)),

where ∇h=(∂x,∂y)T\nabla_{h}=(\partial_{x},\partial_{y})^{T}, and u=(uh,0)u=(u_{h},0) is the solution of the following two-dimenszonnal system with damping

{∂tuh+(uh⋅∇h)uh−μhΔhuh+2uh+∇hp=0,∇h⋅uh=0,uh∣t=0=u0,h.(4)\begin{cases} \partial_{t}u_{h}+(u_{h}\cdot\nabla_{h})u_{h}-\mu_{h}\Delta_{h}u_{h}+\sqrt{2}u_{h}+\nabla_{h}p=0,\\ \nabla_{h}\cdot u_{h}=0,\\ u_{h}|_{t=0}=u_{0,h}. \tag*{(4)} \end{cases}
  1. Isotropic case with μh∼μv∼O(ε)\mu_{h}\sim\mu_{v}\sim O(\varepsilon):

Assume that for C0C_{0} is a universal constant such that

∥uh∥L∞(T2)≤C0.(5)\lVert u_{h}\rVert_{L^{\infty}(\mathbb{T}^{2})}\leq C_{0}. \tag*{(5)}

Then

uε−u→0+in L∞(R+;L2(Ω)),(6)u^{\varepsilon}-u\to0^{+}\quad\text{in }L^{\infty}(\mathbb{R}_{+};L^{2}(\Omega)), \tag*{(6)}

and u=(uh,0)u=(u_{h},0) satisfies the following two-dimensional damped Euler type system

{∂tuh+(uh⋅∇h)uh+2uh+∇hp=0,∇h⋅uh=0,uh∣t=0=u0,h.(7)\begin{cases} \partial_{t}u_{h}+(u_{h}\cdot\nabla_{h})u_{h}+\sqrt{2}u_{h}+\nabla_{h}p=0,\\ \nabla_{h}\cdot u_{h}=0,\\ u_{h}|_{t=0}=u_{0,h}. \tag*{(7)} \end{cases}

References

  1. [1]Bresch, D., Gérard-Varet, D.: Roughness-induced effects on the quasi-geostrophic model. Comm. Math. Phys. 253, 81–119 (2005)DOI
  2. [2]Chemin, J. Y., Desjardins, B., Gallagher, I., Grenier, E.: Mathematical geophysics. An introduction to rotating fluids and the Navier-Stokes equations. Oxford Lecture Ser. Math. Appl., 32. The Clarendon Press, Oxford University Press, Oxford (2006)
  3. [3]Constantin, A., Germain, P.: Stratospheric planetary flows from the perspective of the Euler equation on a rotating sphere. Arch. Ration. Mech. Anal. 245, 587–644 (2022)DOI
  4. [4]Dalibard, A. L., Gérard-Varet, D.: Nonlinear boundary layers for rotating fluids. Anal. PDE 10, 1–42 (2017)
  5. [5]Galdi, G. P.: An introduction to the mathematical theory of the Navier-Stokes equations, Vol. I: Linearized steady problems. Springer Tracts Nat. Philos. 38, Springer-Verlag, New York (1994)
  6. [6]Gérard-Varet, D.: Highly rotating fluids in rough domains. J. Math. Pures Appl. (9) 82, 1453–1498 (2003)
  7. [7]Gérard-Varet, D.: Formal derivation of boundary layers in fluid mechanics. J. Math. Fluid Mech. 7, 179–200 (2005)
  8. [8]Giga, Y., Inui, K., Mahalov, A., Matsui, S., Saal, J.: Rotating Navier-Stokes equations in ℝ³ with initial data nondecreasing at infinity: the Ekman boundary layer problem. Arch. Ration. Mech. Anal. 186, 177–224 (2007)DOI
  9. [9]Giga, Y., Saal, J.: An approach to rotating boundary layers based on vector Radon measures. J. Math. Fluid Mech. 15, 89–127 (2013)DOI
  10. [10]Gong, S. B., Guo, Y., Wang, Y. G.: Ekmann boundary layer expansions of Navier-Stokes equations with rotation. Bull. Inst. Math. Acad. Sin. (N.S.) 10, 375–392 Greenspan, H. P.: The theory of rotating fluids. Cambridge Monogr. Mech. Appl. Math. Cambridge University Press, Cambridge (1968)
  11. [12]Grenier, E., Masmoudi, N.: Ekman layers of rotating fluids, the case of well prepared initial data. Comm. Partial Differential Equations 22, 953–975 (1997)DOI
  12. [13]Jia, Y. F., Du, Y., Guo, L. H.: Geometric constraints on Ekman boundary layer solutions in non-flat regions with well-prepared data. arXiv preprint arXiv: 2408.07582, (2024)
  13. [14]Kato, T., Ponce, G.: Commutator estimates and the Euler and Navier-Stokes equations. Comm. Pure Appl. Math. 41, 891–907 (1988)DOI
  14. [15]Li, W. X., Ngo, V. S., Xu, C. J.: Boundary layer analysis for the fast horizontal rotating fluids. Commun. Math. Sci. 17, 299–338 (2019)
  15. [16]Liu, C. J., Wang, Y. G.: Derivation of Prandtl boundary layer equations for the incompressible Navier-Stokes equations in a curved domain. Appl. Math. Lett. 34, 81–85 (2014)DOI
  16. [18]Masmoudi, N.: Ekman layers of rotating fluids: the case of general initial data. Comm. Pure Appl. Math. 53, 432–483 (2000)doi.org/10.1002/(sici)1097-0312(200004)53:4<432::aid-cpa2>3.0.co;2-y
  17. [19]Pedlosky, J.: Geophysical Fluid Dynamics. Springer-Verlag, New York (1979)
  18. [20]Rax, J.: Mathematical study of the equatorial Ekman boundary layer. Z. Angew. Math. Phys. 70, 165 (2019)DOI
  19. [21]Rousset, F.: Asymptotic behavior of geophysical fluids in highly rotating balls. Z. Angew. Math. Phys. 58, 53–67 (2007)DOI
  20. [22]Stewartson, K.: On almost rigid rotations. Part 2. J. Fluid Mech. 26, 131–144 (1966)DOI
  21. [23]Ukai, S.: The incompressible limit and the initial layer of the compressible Euler equation. J. Math. Kyoto Univ. 26, 323–331 (1986)DOI

Paper details

vlnc:W_bmrrr744
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 5

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents