betaFeedback

WorksPhysics and Astronomy

Ab-Initio Calculations of Nonlinear Susceptibility and Multi-Phonon Mixing Processes in a 2DEG-Piezoelectric Heterostructure

Abstract

Solid-state elastic-wave phonons are a promising platform for a wide range of quantum information applications. An outstanding challenge and enabling capability in harnessing phonons for quantum information processing is achieving strong nonlinear interactions between them. To this end, we propose a general architecture using piezoelectric-semiconductor heterostructures consisting of a piezoelectric acoustic material hosting phonon modes in direct proximity to a two-dimensional electron gas (2DEG). Each phonon in the piezoelectric material carries an electric field, which extends into the 2DEG. The fields induce polarization of 2DEG electrons, which in turn interact with other piezoelectric phononic electric fields. The net result is coupling between the various phonon modes. We derive, from first principles, the nonlinear phononic susceptibility of the system. We show that many nonlinear processes are strongly favored at high electron mobility, motivating the use of the 2DEG to mediate the nonlinearities. We derive in detail the first, second, and third-order susceptibilities and calculate them for the case of a lithium niobate surface acoustic wave interacting with a GaAs-AlGaAs heterostructure 2DEG. We show that, for this system, the strong third-order nonlinearity could enable single-phonon Kerr shift in an acoustic cavity that exceeds realistic cavity linewidths, potentially leading to a new class of acoustic qubit. We further show that the strong second-order nonlinearity could be used to produce a high-gain, traveling-wave parametric amplifier to amplify–and ultimately detect–the outputs of the acoustic cavity qubits. Assuming favorable losses in such a system, these capabilities, combined with the ability to efficiently transduce phonons from microwave electromagnetic fields in transmission lines, thus hold promise for creating all-acoustic quantum information processors.

Introduction

Quantized elastic waves in solids, or phonons, have become increasingly ubiquitous in quantum information processing applications. For example, they can act as a nearly “universal” quantum bus [1, 2], allowing coupling to many useful solid state qubit modalities. Phonons naturally couple to optomechanical cavities [3, 4, 5, 6, 7], which provide a means for optical generation of nonclassical phonon states [8, 9, 10, 11] and optical teleportation of quantum information [12, 13]. Moreover, piezoelectric elastic wave phonons can be used to efficiently couple to traveling wave [14, 15, 16, 17, 18] and standing wave [19, 20] microwave fields in important quantum phononic materials, couple to superconducting circuits [21, 22, 23, 24, 25, 26], or potentially act as quantum memories to store quantum information from superconducting circuits due to their long lifetime [21, 22, 27, 28, 29, 30, 31]. If those piezoelectric phonons are stored within optomechanical cavities, then they provide a means for optical addressing of quantum information in superconducting qubits [32, 33, 34, 35, 36]. Phonons also can couple to solid state color centers and their spin degrees of freedom [2, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46].

The ability of phonons to act as a universal quantum bus or even as a qubit in universal linear acoustics are undoubtedly useful, but these abilities would be far more useful if one could perform quantum logic operations on the phonons, themselves. This, of course, requires single-phonon nonlinearities that are large compared to system losses. No material currently possesses such strong nonlinearities and low losses; thus, it is imperative to explore other means for generating these properties. Recently, we have demonstrated that phononic nonlinearities can be increased by orders of magnitude by mediating them with electronic nonlinearities in a piezoelectric-semiconductor heterostructure [47]. Classical theories of such nonlinearities [48, 49, 50] show that the nonlinearity depends directly on the mobility. Thus, one must wonder what would be possible in materials with ultra-high mobilities, such as two-dimensional electron gasses (2DEGs), which can attain mobilities multiple orders of magnitude higher than bulk semiconductors [51, 52].

To this end, we study a heterostructure consisting of a 2DEG bonded to a strongly piezoelectric elastic slab waveguide substrate (e.g. thin-film LiNbO3_3 on Si, sapphire, or SiC or thin-film Al1−x_{1-x}Scx_xN on SiC). Only the critical layers of the 2DEG remain on the surface of the piezoelectric substrate, which can be achieved with modern heteroepitaxy and chemical etching (e.g. in a GaAs/AlGaAs heteroepitaxial stack). Similar piezoelectric-semiconductor phononic heterostructure systems have been realized in the classical regime utilizing bulk semiconductors to achieve phonon amplification [14, 53, 55] [54], phononic switches [56], phononic circulators [53], phononic mixing [47], and acoustoelectrically Brillouin optomechanical processes [57]. A 2DEG-piezoelectric heterostructure has itself been experimentally realized in the context of measuring a large acoustoelectric effect [58], while more recently, a quantum-dot-piezoelectric heterostructure has been realized for optomechanical applications [59]. In all these cases, including the one at-hand, the acoustic field in the piezoelectric material takes the form of a slab waveguide mode or surface acoustic wave. As in the case of the classical systems, an evanescent electric field associated with the elastic wave phonons extends into the 2DEG, where it induces the polarization of 2DEG electrons. The polarized electrons, in turn, interact with other electric fields stemming from other elastic wave phonon excitations in the system, yielding mixing of multiple phonons mediated by the 2DEG electrons.

Here, we theoretically analyze the electron-phonon interactions in the above system and perform ab-initio quantum calculations of the resulting acoustic nonlinearities and multi-phonon mixing processes that result from them. This allows for the exact calculation of phononic mixing processes such as second harmonic generation, parametric amplification, Kerr nonlinearity, etc. We find, for example, that these kinds of systems could produce high-gain and low-loss quantum-limited degenerate parametric amplification via three-wave mixing with only nanowatts of acoustic pump power; we also find that the effective Kerr nonlinearity in the system could be sufficient to produce an effective two-level system in a wavelength-scale cavity with sufficiently low losses, given a high-QQ acoustic cavity, which has recently been achieved [60]. Thus, our results allow one to imagine a new class of quantum information processing tools for phonons based on electronically mediated nonlinearity in heterostructures and calculate the exact details of these processes.

Such a system is illustrated in Figure 1. Here, a 2DEG in a nearly single-mode cavity—the qubit cavity—creates a qubit at frequency (wavevector) ω0\omega_0 (k0k_0) via four-wave phononic Kerr nonlinearity. The qubit cavity is coupled to a tunable readout cavity that allows adiabatic transfer of the qubit state into a purely phononic state of the readout cavity. The readout cavity is strongly coupled to an output phononic bus waveguide that leads to a degenerate, traveling wave parametric three-wave mixing phononic amplifier. A pair of pump waveguides inject and extract the pump field at frequency (wavevector) ωω0\omega\omega_0 (2k02k_0) via acoustic evanescent coupling. The amplified phononic field at ω0\omega_0 can then be transduced into a microwave field at the system output, to be measured by room temperature electronics after a series of progressively higher temperature amplifiers. Note that elastic waves with highly restricted transverse dimensions can be efficiently excited (low microwave insertion loss and low elastic wave loss) by focusing transducers [61, 62, 63], phononic negative refraction in phononic crystals [64, 65], and phononic crystal gradient-index (GRIN) lenses [66]. Essentially, with the inclusion of 2DEGs playing the role of spatially selective sources of single-phonon nonlinearities, one can imagine circuit QED for phonons that mimic the functionalities of those of superconducting circuit QED.

Diagram of an acoustic Kerr cavity coupled to a degenerate traveling-wave parametric amplifier

Figure 1. Diagram of a system consisting of an acoustic Kerr cavity (left) coupled to a degenerate traveling-wave parametric amplifier (right). The coupling in the acoustic cavity between the 2DEG (red) and the piezoelectric material (blue) gives rise to a Kerr nonlinearity and in turn a qubit. The qubit is then amplified by the 3-wave-mixing in the parametric amplifier due to the coupling between the 2DEG there (red) and the piezoelectric material (blue), before being transduced into a microwave field at the system output. Note that the thin waveguide carries the pump phonons.

The manuscript is organized as follows. In Sec. II, we derive the electric field per phonon experienced by the 2DEG electrons based on the piezoelectric material’s properties, as well as the 2DEG electric field screening. In Sec. III, we derive the susceptibility of the 2DEG to the electric fields associated with the elastic wave phonons. In § 1.3, we present numerical and analytical results for the 2DEG susceptibility in certain relevant limits. In § 1.4, we combine the susceptibility values from § 1.3 with the electric-field-per-phonon values from Sec. II to calculate the resulting phononic susceptibility of the system and multi-phonon mixing dynamics. As a check on validity, in Sec. VI we derive the classical susceptibilities up to second order based on our quantum susceptibility model and compare to existing classical results in the literature.

Deriving the Electric Field Per Phonon

We start with the critical task of deriving the electric field per phonon from the elasticity, dielectric coupling, and piezoelectric coupling tensors given a shear-wave surface acoustic field. In general, the following relationships must hold for any piezoelectric material [67]:

Tij=∑k,ll≥k(cijklSkl−ekijEk),(1)T_{ij}=\sum_{\substack{k,l\\l\geq k}}\left(c_{ijkl}S_{kl}-e_{kij}E_k\right), \tag*{(1)}
Di=∑j,kk≥j(ϵijEj+eijkSjk),(2)D_i=\sum_{\substack{j,k\\k\geq j}}\left(\epsilon_{ij}E_j+e_{ijk}S_{jk}\right), \tag*{(2)}

where cc, ϵ\epsilon, and ee are the elasticity, dielectric, and piezoelectric coupling tensors, respectively, while TT, SS, EE, and DD represent the stress, strain, electric field, and electric displacement field, respectively.

Our first goal is to determine the electric field for a given strain. In the absence of an external electric field, the electric displacement field DD goes to 0 regardless of how the coordinate system is defined, yielding the following relationship between the electric field and the strain field based on Eq. (2):

Ei=−∑j,k,ll≥k(ϵ−1)ijejklSkl.(3)E_i=-\sum_{\substack{j,k,l\\l\geq k}}(\epsilon^{-1})_{ij}e_{jkl}S_{kl}. \tag*{(3)}

The electric field per phonon can thus be calculated from the strain amplitude per phonon.

We thus turn to solving the strain amplitude for a given mode as a function of phonon number in that mode. In general, for a surface acoustic wave propagating along the plane of the surface, the displacement amplitude will vary along the axis perpendicular to the surface. Defining the xx-axis as the direction of propagation and the zz-axis as the axis perpendicular to the surface, we can express the displacement field as a superposition of modes as follows:

u(r)=un,qfn,q(z)(ei(qx−ωt)+e−i(qx−ωt))=2un,qfn,q(z)cos⁡(qx−ωt).(4)\begin{aligned} \mathbf{u}(\mathbf{r})&=\mathbf{u}_{n,q}f_{n,q}(z)\left(e^{i(qx-\omega t)}+e^{-i(qx-\omega t)}\right)\\ &=2\mathbf{u}_{n,q}f_{n,q}(z)\cos(qx-\omega t). \tag*{(4)} \end{aligned}

where the functions fn,qf_{n,q} are orthogonal for a given wavevector qq:

∫dzfn,q(z)fm,q(z)=Lzδm,n.(5)\int dz f_{n,q}(z)f_{m,q}(z)=L_z\delta_{m,n}. \tag*{(5)}

The strain components corresponding to the displacement u(r)\mathbf{u}(\mathbf{r}) are calculated as follows:

Sij(r)=∂ui(r)∂rj+(1−δi,j)∂uj(r)∂ri=un,q(gij,n,q(z)ei(qx−ωt)+gij,n,q∗e−i(qx−ωt)).(6)\begin{aligned} S_{ij}(\mathbf{r})&=\frac{\partial u_i(\mathbf{r})}{\partial r_j}+(1-\delta_{i,j})\frac{\partial u_j(\mathbf{r})}{\partial r_i}\\ &=u_{n,q}\left(g_{ij,n,q}(z)e^{i(qx-\omega t)}+g_{ij,n,q}^{*}e^{-i(qx-\omega t)}\right). \tag*{(6)} \end{aligned}

where gij,n,qg_{ij,n,q} is defined as follows:

gij,n,q(z)=iqfn,q(z)(cos⁡θn,q,iδj,x+cos⁡θn,q,j(1−δi,j)δi,x)+fn,q′(z)(cos⁡θn,q,iδj,z+cos⁡θn,q,j(1−δi,j)δi,z).(7)\begin{aligned} g_{ij,n,q}(z)={}&iqf_{n,q}(z)\left(\cos\theta_{n,q,i}\delta_{j,x}+\cos\theta_{n,q,j}(1-\delta_{i,j})\delta_{i,x}\right)\\ &+f'_{n,q}(z)\left(\cos\theta_{n,q,i}\delta_{j,z}+\cos\theta_{n,q,j}(1-\delta_{i,j})\delta_{i,z}\right). \tag*{(7)} \end{aligned}

where θn,q,m\theta_{n,q,m} is defined as the angle between the displacement vector un,q\mathbf{u}_{n,q} and the mm-axis.

The goal is to determine the global amplitude un,qu_{n,q} as a function of the number of phonons NN in the mode (n,q)(n,q). To that end, we relate the rate of change of the displacement u˙\dot{\mathbf{u}} to the kinetic energy TT and use the fact that the total mode energy NℏωN\hbar\omega is twice the kinetic energy for a simple harmonic oscillator:

(N+12)ℏω=2T=2∫d3r 12ρ∑iui2(r)=4ρω2un,q2∫dy∫dxsin⁡2(qx−ωt)∫dzfn,q2(z)=4ρω2un,q2LyLx2Lz,un,q=(N+1/2)ℏ2ρωV,(8)\begin{aligned} \left(N+\frac{1}{2}\right)\hbar\omega&= 2T \\ &= 2\int d^{3}r\,\frac{1}{2}\rho\sum_i u_i^2(\mathbf{r}) \\ &= 4\rho\omega^2u_{n,q}^2\int dy\int dx\sin^2(qx-\omega t)\int dz f_{n,q}^2(z) \\ &= 4\rho\omega^2u_{n,q}^2L_y\frac{L_x}{2}L_z, \\ u_{n,q} &= \sqrt{\frac{(N+1/2)\hbar}{2\rho\omega V}}, \tag*{(8)} \end{aligned}

where V=LxLyLzV=L_xL_yL_z is the mode volume in the piezoelectric material. Note that if the displacement consists of a superposition of modes, then there will be no direct coupling between the modes, due to two factors. First, if the modes are of different wavelengths, then the integral of the product of the amplitudes over the xx-axis (i.e., the propagation axis) will go to zero. Second, even for two modes of the same wavelength, the fact that the zz-varying functions ff are orthogonal to one another ensures that the integral of the product of the amplitudes over the zz-axis will go to zero.

Finally, having solved for the strain amplitude per phonon, we calculate the electric field per phonon at the surface. In general, the electric field amplitude corresponding to a plane wave of frequency ω\omega and wavevector qq propagating in the m^\hat{\mathbf{m}}-direction can be expanded in a manner analogous to the displacement and strain amplitudes:

E(r)=En,q(z)ei(qxm−ωt)+En,q∗(z)e−i(qxm−ωt).(9)\mathbf{E}(\mathbf{r})=\mathbf{E}_{n,q}(z)e^{i(qx_m-\omega t)}+\mathbf{E}_{n,q}^{*}(z)e^{-i(qx_m-\omega t)}. \tag*{(9)}

We solve for the zz-dependent electric field amplitude En,q\mathbf{E}_{n,q} as a function of the phonon numbers in the respective modes using Eq. (3) as follows:

References

  1. [1]H. Raniwala, S. Krastanov, L. Hackett, M. Eichenfield, D. R. Englund, and M. E. Trusheim, Phys. Rev. Applied 19, 064051 (2023).
  2. [2]T. Neuman, M. Eichenfield, M. E. Trusheim, L. Hackett, P. Narang, and D. Englund, npj Quantum Inf. 7, 121 (2021).
  3. [3]M. Eichenfield, J. Chan, R. M. Camacho, K. J. Vahala, and O. Painter, Nature 462, 78 (2009).
  4. [4]M. Aspelmeyer, T. J. Kippenberg, and F. Marquardt, Rev. Mod. Phys. 86, 1391 (2014).
  5. [5]T. J. Kippenberg and K. J. Vahala, Opt. Express 15, 17172 (2007).
  6. [6]M.-A. Lemonde, N. Didier, and A. A. Clerk, Phys. Rev. Lett. 111, 053602 (2013).
  7. [7]M. Metcalfe, Appl. Phys. Rev. 1, 031105 (2014).
  8. [8]R. Riedinger, S. Hong, R. A. Norte, J. A. Slater, J. Shang, A. G. Krause, V. Anant, M. Aspelmeyer, and S. Gröblacher, Nature 530, 313 (2016).
  9. [9]S. Hong, R. Riedinger, I. Marinkovic, A. Wallucks, S. G. Hofer, R. A. Norte, M. Aspelmeyer, and S. Gröblacher, Science 358, 203 (2017).
  10. [10]J. Li, S. Gröblacher, S.-Y. Zhu, and G. S. Agarwal, Phys. Rev. A 98, 011801(R) (2018).
  11. [11]A. Zivari, R. Stockill, N. Fiaschi, and S. Gröblacher, Nat. Phys. 18, 789 (2022).
  12. [12]N. Fiaschi, B. Hensen, A. Wallucks, R. Benevides, J. Li, T. P. Mayer Alegre, and S. Gröblacher, Nat. Photon. 15, 817 (2021).
  13. [13]D. Soh, E. Chatterjee, and M. Eichenfield, Phys. Rev. Research 3, 033027 (2021).
  14. [14]L. Hackett, M. Miller, R. Beaucéjour, C. M. Nordquist, J. C. Taylor, S. Santillan, R. H. Olsson, and M. Eichenfield, Appl. Phys. Lett. 123, 073502 (2023).
  15. [15]A. H. Safavi-Naeini and O. Painter, New J. Phys. 13, 013017 (2011).
  16. [16]F. Massel, T. T. Heikkilä, J.-M. Pirkkalainen, S. U. Cho, H. Saloniemi, P. J. Hakonen, and M. A. Sillanpää, New J. Phys. 13, 013017 (2011).
  17. [17]M. Wu, E. Zeuthen, K. C. Balram, and K. Srinivasan, Phys. Rev. Applied 13, 014027 (2020).
  18. [18]G. Arnold, M. Wulf, S. Barzanjeh, E. S. Redchenko, A. Rueda, W. J. Hease, F. Hassani, and J. M. Fink, Nat. Commun. 11, 4460 (2020).
  19. [19]J. D. Teufel, J. W. Harlow, C. A. Regal, and K. W. Lehnert, Phys. Rev. Lett. 101, 197203 (2008).
  20. [20]A. H. Safavi-Naeini, D. Van Thourhout, R. Baets, and R. Van Laer, Optica 6, 213 (2019).
  21. [21]C. Chamberland, K. Noh, P. Arrangoiz-Arriola, E. T. Campbell, C. T. Hann, J. Iverson, H. Putterman, T. C. Bohdanovicz, S. T. Flammia, A. Keller, G. Refael, J. Preskill, L. Jiang, A. H. Safavi-Naeini, O. Painter, and F. G. S. L. Brandão, PRX Quantum 3, 010329 (2022).
  22. [22]G. S. MacCabe, H. Ren, J. L. Luo, J. D. Cohen, H. Zhou, A. Sipahigil, M. Mirhosseini, and O. Painter, Science 370, 840 (2020).
  23. [23]P. Arrangoiz-Arriola, E. A. Wollack, M. Pechal, J. D. Witmer, J. T. Hill, and A. H. Safavi-Naeini, Phys. Rev. X 8, 031007 (2018).
  24. [24]S. Barzanjeh, A. Xuereb, S. Gröblacher, M. Paternostro, C. A. Regal, and E. M. Weig, Nat. Phys. 18, 15 (2022).
  25. [25]J. J. Viennot, X. Ma, and K. W. Lehnert, Phys. Rev. Lett. 121, 183601 (2018).
  26. [26]K. J. Satzinger, Y. P. Zhong, H.-S. Chang, G. A. Peairs, A. Bienfait, M.-H. Chou, A. Y. Cleland, C. R. Conner, E. Dumur, J. Grebel, I. Gutierrez, B. H. November, R. G. Povey, S. J. Whiteley, D. D. Awschalom, D. I. Schuster, and A. N. Cleland, Phys. Rev. Lett. 121, 183601 (2018).
  27. [27]J. C. Taylor, E. Chatterjee, W. F. Kindel, D. Soh, and
  28. [28]S. V. Kilina, D. S. Kilin, V. V. Prezhdo, and O. V. Prezhdo, J. Phys. Chem. C 115, 21641 (2011).
  29. [29]C. T. Hann, C.-L. Zou, Y. Zhang, Y. Chu, R. J. Schoelkopf, S. M. Girvin, and L. Jiang, Phys. Rev. Lett. 123, 250501 (2019).
  30. [30]A. Wallucks, I. Marinković, B. Hensen, R. Stockill, and S. Gröblacher, Nat. Phys. 16, 772 (2020).
  31. [31]J. Chan, T. P. Mayer Alegre, A. H. Safavi-Naeini, J. T. Hill, A. Krause, S. Gröblacher, M. Aspelmeyer, and O. Painter, Nature 478, 89 (2011).
  32. [32]J. Bochmann, A. Vainsencher, D. D. Awschalom, and A. N. Cleland, Nat. Phys. 9, 712 (2013).
  33. [33]M. Mirhosseini, A. Sipahigil, M. Kalaee, and O. Painter, Nature 588, 599 (2020).
  34. [34]M. Försch, R. Stockill, A. Wallucks, I. Marinković, C. Gärtner, R. A. Norte, F. van Otten, A. Fiore, M. Srinivasan, and S. Gröblacher, Nat. Phys. 16, 69 (2020).
  35. [35]W. Jiang, C. J. Sarabalis, Y. D. Dahmani, R. N. Patel, F. M. Mayor, T. P. McKenna, R. Van Laer, and A. H. Safavi-Naeini, Nat. Commun. 11, 1166 (2020).
  36. [36]K. C. Balram and K. Srinivasan, Adv. Quantum Technol. 5, 2100095 (2022).
  37. [37]K. V. Kepesidis, S. D. Bennett, S. Portolan, M. D. Lukin, and P. Rabl, Phys. Rev. B 88, 064105 (2013).
  38. [38]A. Albrecht, A. Retzker, F. Jelezko, and M. B. Plenio, New J. Phys. 15, 083014 (2013).
  39. [39]R. Albrecht, A. Bommer, C. Deutsch, J. Reichel, and C. Becher, Phys. Rev. Lett. 110, 243602 (2013).
  40. [40]S. D. Bennett, N. Y. Yao, J. Otterbach, P. Zoller, P. Rabl, and M. D. Lukin, Phys. Rev. Lett. 110, 156402 (2013).
  41. [41]J. Teissier, A. Barfuss, P. Appel, E. Neu, and P. Maletinsky, Phys. Rev. Lett. 113, 020503 (2014).
  42. [42]M. L. Goldman, A. Sipahigil, M. W. Doherty, N. Y. Yao, S. D. Bennett, M. Markham, D. J. Twitchen, N. B. Manson, A. Kubanek, and M. D. Lukin, Phys. Rev. Lett. 114, 145502 (2015).
  43. [43]S. Meesala, Y.-I. Sohn, H. A. Atikian, S. Kim, M. J. Burek, J. T. Choy, and M. Lončar, Phys. Rev. Applied 5, 034010 (2016).
  44. [44]P.-B. Li, Z.-L. Xiang, P. Rabl, and F. Nori, Phys. Rev. Lett. 117, 015502 (2016).
  45. [45]T. Oeckinghaus, S. A. Momenzadeh, P. Scheiger, T. Shalomayeva, A. Finkler, D. Dasari, R. Stöhr, and J. Wachtrup, Nano Lett. 20, 463 (2020).
  46. [46]A. Liu and S. T. Cundiff, Phys. Rev. Materials 4, 055202 (2020).
  47. [47]L. Hackett, M. Koppa, B. Smith, M. Miller, S. Santillan, S. Weatherred, S. Arterburn, T. A. Friedmann, N. Otterstrom, and M. Eichenfield, arXiv:2305.01600 (2023).arxiv.org/abs/2305.01600
  48. [48]E. M. Conwell and A. K. Ganguly, Phys. Rev. B 4, 2535 (1971).
  49. [49]C.-C. Wu and H. N. Spector, J. Appl. Phys. 43, 2937 (1972).
  50. [50]G. Johri and H. N. Spector, Phys. Rev. B 12, 3215 (1975).
  51. [51]L. Pfeiffer, K. W. West, H. L. Stormer, and K. W. Baldwin, Appl. Phys. Lett. 55, 1888 (1989).
  52. [52]V. Umansky, M. Heiblum, Y. Levinson, J. Smet, J. Nübler, and M. Dolev, J. Cryst. Growth 311, 1658 (2009).
  53. [53]L. Hackett, M. Miller, F. Brimigion, D. Dominguez, G. Peake, A. Tauke-Pedretti, S. Arterburn, T. A. Friedmann, and M. Eichenfield, Nat. Commun. 12, 2769 (2021). L. Hackett, M. Miller, S. Weatherred, S. Arterburn, M. J. Storey, G. Peake, D. Dominguez, P. S. Finnegan, T. A. Friedmann, and M. Eichenfield, Nat. Electron. 6, 76 (2023).
  54. [55]L. Hackett, X. Du, M. Miller, B. Smith, S. Santillan, J. Montoya, R. Reyna, S. Arterburn, S. Weatherend, T. A. Friedmann, R. H. Olsson III, and M. Eichenfield, arXiv:2309.15725 (2023).arxiv.org/abs/2309.15725
  55. [56]M. J. Storey, L. Hackett, S. DiGregorio, M. Miller, G. Peake, M. Eichenfield, and D. Weinstein, in 2021 21st International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers) (2021) pp. 545–548.
  56. [57]N. T. Otterstrom, M. J. Storey, R. O. Behunin, L. Hackett, P. T. Rakich, and M. Eichenfield, Phys. Rev. Applied 19, 014059 (2023).
  57. [58]M. Rotter, A. Wixforth, W. Ruil e, D. Bernklau, and H. Riechert, Appl. Phys. Lett. 73, 2128 (1998).
  58. [59]E. D. S. Nysten, A. Rastelli, and H. J. Krenner, Appl. Phys. Lett. 117, 121106 (2020).
  59. [60]L. Shao, S. Maity, L. Zheng, L. Wu, A. Shams-Ansari, Y.-I. Sohn, E. Puma, M. N. Gadalla, M. Zhang, C. Wang, E. Hu, K. Lai, and M. Lončar, Phys. Rev. Applied 12, 014022 (2019).
  60. [61]A. Siddiqui, R. H. Olsson, and M. Eichenfield, J. Microelectromech. Syst. 27, 1054 (2018).
  61. [62]Q. Liu, H. Li, and M. Li, Optica 6, 778 (2019).
  62. [63]M. Eichenfield and R. Olsson, in 2013 IEEE International Ultrasonics Symposium (IUS) (2013) pp. 753–756.
  63. [64]X. Zhang and Z. Liu, Appl. Phys. Lett. 85, 341 (2004).
  64. [65]J. H. Page, AIP Advances 6, 121606 (2016).
  65. [66]T.-T. Wu, Y.-T. Chen, J.-H. Sun, S.-C. S. Lin, and T. J. Huang, Appl. Phys. Lett. 98, 171911 (2011).
  66. [67]M. J. A. Schuetz, E. M. Kessler, G. Giedtke, L. M. K. Vandersypen, M. D. Lukin, and J. I. Cirac, Phys. Rev. X 5, 031031 (2015).
  67. [68]Y. Todorov, Phys. Rev. B 12, 125409 (2015).
  68. [69]R. W. Boyd, Nonlinear Optics, 3rd ed. (Elsevier, Rochester, New York, 2008).
  69. [70]E. Chatterjee, D. Soh, and M. Eichenfield, J. Phys. A: Math. Theor. 55, 105302 (2022).
  70. [71]C. M. Caves, Phys. Rev. D 26, 1817 (1982).
  71. [72]B. Yurke, L. R. Corruccini, P. G. Kaminsky, L. W. Rupp, A. D. Smith, A. H. Silver, R. W. Simon, and E. A. Whittaker, Phys. Rev. A 39, 2519 (1989).
  72. [73]D. Levandovsky, M. Vasilyev, and P. Kumar, Opt. Lett. 24, 984 (1999).
  73. [74]M. A. Castellanos-Beltran, K. D. Irwin, G. C. Hilton, L. R. Vale, and K. W. Lehnert, Nat. Phys. 4, 929 (2008).
  74. [75]M. Karlsson, J. Light. Technol. 34, 1411 (2016).
  75. [76]A. A. Clerk, M. H. Devoret, S. M. Girvin, F. Marquardt, and R. J. Schoelkopf, Rev. Mod. Phys. 82, 1155 (2010).
  76. [77]B. S. Wherrett, Proc. R. Soc. Lond. A 390, 373 (1983).
  77. [78]R. H. Lehmberg, J. Reintjes, and R. C. Eckardt, Phys. Rev. A 13, 1095 (1976).
  78. [79]T. Yajima and H. Souma, Phys. Rev. A 17, 309 (1978).
  79. [80]I. C. Khoo and R. F. Code, Opt. Commun. 32, 145 (1980).
  80. [81]R. Panock and R. Temkin, IEEE J. Quantum Electron. 13, 425 (1977).
  81. [82]D. L. White, J. Appl. Phys. 33, 2547 (1962).
  82. [83]K. M. Birnbaum, A. Boca, R. Miller, A. D. Boozer, T. E. Northup, and H. J. Kimble, Nature 436, 87 (2005).
  83. [84]P. Rabl, Phys. Rev. Lett. 107, 063601 (2011).
  84. [85]L. Shao, D. Zhu, M. Colangelo, D. Lee, N. Sinclair, Y. Hu, P. T. Rakich, K. Lai, K. K. Berggren, and M. Lončar, Nat. Electron. 5, 348 (2022).

Paper details

vlnc:W_bsna8khb
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 4

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents