betaFeedback

WorksPhysics and Astronomy

Effects of Spatiotemporal Upscaling on Predictions of Reactive Transport in Porous Media

Abstract

The typical temporal resolution used in modern simulations significantly exceeds characteristic time scales at which the system is driven. This is especially so when systems are simulated over time-scales that are much longer than the typical temporal scales of forcing factors. We investigate the impact of space-time upscaling on reactive transport in porous media driven by time-dependent boundary conditions whose characteristic time scale is much smaller than that at which transport is studied or observed at the macroscopic level. The focus is on transport of a reactive solute undergoing diffusion, advection and heterogeneous reaction on the solid grain boundaries. We first introduce the concept of spatiotemporal upscaling in the context of homogenization by multiple-scale expansions, and demonstrate the impact of time-dependent forcings and boundary conditions on macroscopic reactive transport. We then derive the macroscopic equation as well as the corresponding applicability conditions based on the order of magnitude of the Péclet and Damköhler dimensionless numbers. Finally, we demonstrate that the dynamics at the continuum scale is strongly influenced by the interplay between signal frequency at the boundary and transport processes at the pore level.

Key Points:

  • Introduction of the concept of spatiotemporal upscaling in the context of homogenization by multiple-scale expansions.

  • Impact of time-dependent forcings and boundary conditions on macroscopic reactive transport in porous media.

  • The dynamics at the continuum scale is strongly influenced by the interplay between signal frequency at the boundary and transport processes at the pore level.

Corresponding author: Farzaneh Rajabi, [email protected]

Introduction

The choice of an appropriate level of hydrogeologic model complexity continues to be a challenge. That is because subsurface flow and transport take place in complex highly hierarchical heterogeneous environments, and exhibit nonlinear dynamics and often lack spatiotemporal scale separation [59]. The constant tension between fundamental understanding and predictive science on the one hand, and the need to provide science-informed engineering-based solutions to practitioners, on the other, is part of an ongoing debate on the role of hydrologic models [e.g. 37]. A physics-based model development follows a bottom-up approach which, through rigorous upscaling techniques, allows one to construct effective medium representations of fine-scale processes with different degrees of coupling and complexity [e.g. 71, 29]. Yet, current model deployment is generally based on established engineering practices and often relies on ‘simpler’ classical local continuum descriptions with limited predictive capabilities.

The development of multiscale, multiphysics models aims at filling this scale gap and at addressing the limited applicability of classical local macroscopic models [7, 9, 36]. Originated in the physics literature, multiscale methods were developed to couple particle to continuum solvers [67, 27, 1, 63, 54, 3, 4] (Flekkøy et al. 2000). Multiphysics domain-decomposition approaches [43, 6, 24], combined with multiscale and multiconcepts, led to the development of multiphysics, multiscale capabilities to address the multiscale nature of transport in the subsurface [58, 35, 51, 12, 34, 74, 60]. The proposed methods predominantly focus on tackling partial or total lack of scale separation due to spatial heterogeneity, and are often based on spatial upscaling to construct coupling conditions between representations at different scales.

Upscaling methods enable one to formally establish a link between fine-scale (e.g. pore-scale) and observation-scale/macroscopic processes. Spatial upscaling methods include volume averaging [e.g. 72, 70, 69, 71] and thermodynamically constrained averaging theory [25, 26], the method of moments [61, 13, 53], homogenization via multiple-scale expansions [11, 31, 5, 30 e.g.], and pore network models [2]. Cushman et al. [ [17] provides a review of different upscaling methods. Comparative studies discuss differences and similarities of various upscaling techniques [e.g., Davit et al., [20]]. Other upscaling approaches are described in [14].

Yet, the need for computationally efficient predictions of subsurface system response to unsteady, and potentially highly fluctuating, forcing factors calls for the formulation of spatiotemporally-upscaled models. The practical need of averaging in time (as well as in space) originates from the disparity in temporal scales between the frequency at which the system is driven and the temporal horizon in which predictions are made, e.g., local micro-climate (precipitation, etc.) and the temporal scale relevant for climate studies, or local human activity and CO2\mathrm{CO}_2 sequestration scenarios, which, will be referred to as ‘long times’ in the following. In an attempt to curb computational burden, this problem is often tackled by adopting larger time-stepping and by temporally averaging time-dependent boundary conditions or driving forces [10, 68, 73].

While standard in the theory of turbulence [62, 47], time-averaging of fine-scale models of flow in porous media and geologic formations has attracted less attention [41, 49, 50, 48] (He and Sykes 1996). Yet, the implications of temporally unresolved boundary conditions and driving forces in nonlinear subsurface systems appear to be dire: for example, Wang et al. [Wang et al., [68] showed that predictions of nonlinear transport in the vadose zone are greatly affected by the time resolution of forcing factors (e.g. annual versus hourly meteorological data). In partially saturated flows, Bresler and Dagan [ [15] and Russo et al. [ [52] found breakthrough curves under time-varying and time-averaged boundary conditions to be very different, with contaminant travelling faster and further in the former case. Similar highly dynamical conditions can be found in the subsurface interaction zone (SIZ) of riverine systems where environmental transitions often result in biogeochemical hotspots and moments that drive microbial activity and control organic carbon cycling [57]. To the best of our knowledge, with a few exceptions [10, 41, 68] (He and Sykes 1996), the effects of temporal averaging on macroscopic transport have not been thoroughly investigated. On the contrary, the impact of temporally fluctuating flows, boundary conditions and forcings in the context of upscaled transport in porous media has been the object of a number of studies. The seminal work by Smith [ [55, 56] investigated the impact of dispersion in oscillatory flows and derived a spatially upscaled delay-diffusion equation which accounts for memory effects. The effect of periodic oscillations leads to dynamic effective dispersion and time-dependent closure problems as analyzed by a number of authors [e.g. Moyne, [38]; Valdes-Parada and Alvarez Ramirez, [64]; Davit and Quintard, [19]; Valdes-Parada and Alvarez Ramirez, [65]; Dentz and Carrera, [21]; Pool et al., [44, 45, 46]; Nissan et al., [39]]. Other studies focused on spatial upscaling of transport in porous media with changing pore-scale geometry due, e.g., to precipitation/dissolution processes [66, 32, 33, 16]. In the context of atmospheric and oceanic pollutant transport where large-scale mean flow interacts non-linearly with small-scale fluctuations, Pavliotis et al. [Pavliotis, (2002); Pavliotis and Kramer [41]; Pavliotis and Stuart [42] use higher-order homogenization to derive a rigorous homogenized equation and screen the temporal distribution of macroscopic quantities over long times by selecting appropriate spatial-temporally invariant volumes of the domain over which space-time volume averaging is applied. Fish and Chen [ [22] presents a model for wave propagation in heterogeneous media by introducing multiple space-time scales with higher order homogenization theory to resolve stability and consistency issues.

Here, we are primarily interested in studying the effect of space-time averaging on the final form of the upscaled equations for long times (rather than early and/or pre-asymptotic times [65]), i.e. when the influence on the initial condition has been forgotten, and their corresponding regimes of validity. This knowledge is important to assess the accuracy of, e.g., numerical models wherein the temporal numerical resolution significantly exceeds characteristic scales at which the system is driven. Specifically, we focus on reactive transport in undeformable porous media driven by time-varying boundary conditions, whose frequency is much larger than the characteristic time scale at which transport is studied or observed at the macroscopic scale. Some of the questions we are interested in addressing are: under which conditions (e.g. signal frequency) the instantaneous macroscopic response of the system can be decoupled from temporally fluctuating forcing factors (e.g. temporally dependent injection rates at the boundary)? How to properly account for time-averaged boundary conditions in upscaled models? We propose to address these questions by introducing the concept of spatiotemporal upscaling in the context of asymptotic multiple scale expansions. The main contribution of the paper is to explicitly address the question of whether or not, and how, space-time upscaling affects reactive transport modeling, and more importantly, if/what conditions of applicability of upscaled equations need to be satisfied for the macroscopic models to be accurate. This problem becomes of increasing importance as hydrologic modeling (and its relation to climate models) expands the time-window (from months to years to decades and more) used for forward predictions, while the time resolution in our simulations remains constrained by computational costs.

The manuscript is organized as follows. In § 2, we present the pore-scale model describing advective and diffusive transport of a solute subject to time-dependent Dirichlet conditions at the macroscale boundary and undergoing a heterogeneous chemical reaction with the solid matrix. In § 3, we introduce the concept of spatiotemporal upscaling in the context of homogenization by multiple-scale expansions, and demonstrate the impact of time-dependent forcings and boundary conditions on macroscopic reactive transport. We first classify the macroscopic dynamics in three regimes (slowly, moderately and highly fluctuating regimes) and then derive a set of frequency-dependent conditions under which scales are separable. § 4 provides a physical interpretation of the key analytical results of § 3. In § 5, we discuss different transport regimes in terms of relevant dimensionless numbers. Conclusions and outlook are given in § 7.

Problem Formulation

Domain and governing equations

Let Ω^\hat{\Omega} be a domain in Rn\mathbb{R}^{n} (n≥2n \ge2), bounded by ∂Ω^\partial\hat{\Omega}, of characteristic length LL such that Ω^=Ω^s∪Ω^p\hat{\Omega} = \hat{\Omega}_{s} \cup\hat{\Omega}_{p}, where Ω^s\hat{\Omega}_{s} and Ω^p\hat{\Omega}_{p} are the solid and pore phases in Ω^\hat{\Omega}, respectively, and Ω^p\hat{\Omega}_{p} is fully saturated with a viscous fluid. The boundary between the solid and the pore space domains is Γ^\hat{\Gamma}. The domain Ω^\hat{\Omega} is composed of repeating unit cells Y^=B^∪G^\hat{Y} = \hat{B} \cup\hat{G} of characteristic size ll with l≪Ll \ll L, where G^\hat{G} and B^\hat{B} are the solid and pore phases in Y^\hat{Y}, respectively. The geometric scaling parameter

ε:=lL≪1(1)\varepsilon:= \frac{l}{L} \ll1 \tag*{(1)}

relates the size of the pore-scale unit cell to the corresponding macroscale (or observation spatial scale).

The laminar incompressible flow of a viscous fluid through the pore space Ω^p\hat{\Omega}_{p} satisfies Stokes law and the continuity equation

μ∇^2v^ε−∇^p^ε=0,x^∈Ω^pε,\mu\hat{\nabla}^{2}\hat{\mathbf{v}}_{\varepsilon} - \hat{\nabla}\hat{p}_{\varepsilon} = 0,\qquad\hat{\mathbf{x}} \in\hat{\Omega}_{p}^{\varepsilon},
∇^⋅v^ε=0,x^∈Ω^pε,\hat{\nabla}\cdot\hat{\mathbf{v}}_{\varepsilon} = 0,\qquad\hat{\mathbf{x}} \in\hat{\Omega}_{p}^{\varepsilon},

subject to

v^ε=0,x∈Γ^ε,(2)\hat{\mathbf{v}}_{\varepsilon} = 0,\qquad\mathbf{x} \in\hat{\Gamma}^{\varepsilon}, \tag*{(2)}

and appropriate boundary conditions on vε\mathbf{v}_{\varepsilon} and p^ε\hat{p}_{\varepsilon} on the domain boundary ∂Ω^\partial\hat{\Omega}. In (2) and (3), v^ε\hat{\mathbf{v}}_{\varepsilon} [LT−1^{-1}], p^ε\hat{p}_{\varepsilon} and μ\mu are the fluid velocity, dynamic pressure and dynamic viscosity, respectively. The transport of a reactive solute M\mathcal{M}, dissolved in the fluid, with molar concentration c^ε(x^,t^)\hat{c}_{\varepsilon}(\hat{\mathbf{x}},\hat{t}) [molL−3^{-3}] at x^∈Ω^pε\hat{\mathbf{x}} \in\hat{\Omega}_{p}^{\varepsilon} and time t^>0\hat{t} > 0, is governed by

∂c^ε∂t^+v^ε⋅∇^c^ε=∇^⋅(D^∇^c^ε),x^∈Ω^pε,t^>0(3)\frac{\partial\hat{c}_{\varepsilon}}{\partial\hat{t}}+\hat{\mathbf{v}}_{\varepsilon}\cdot\hat{\nabla}\hat{c}_{\varepsilon}=\hat{\nabla}\cdot\left(\hat{\mathbf{D}}\hat{\nabla}\hat{c}_{\varepsilon}\right),\qquad\hat{\mathbf{x}}\in\hat{\Omega}_{p}^{\varepsilon},\quad\hat{t}>0 \tag*{(3)}

where D^\hat{\mathbf{D}} [L2^{2}T−1^{-1}] is the molecular diffusion tensor, [D∇cε]i=Dij∂xjcε[\mathbf{D}\nabla c_{\varepsilon}]_{i}=D_{ij}\partial_{x_{j}}c_{\varepsilon} is a matrix-vector multiplication, and ‘⋅\cdot’ represents a scalar product, e.g. v^ε⋅∇^c^ε=v^ε,i∂x^ic^ε\hat{\mathbf{v}}_{\varepsilon}\cdot\hat{\nabla}\hat{c}_{\varepsilon}=\hat{v}_{\varepsilon,i}\partial_{\hat{x}_{i}}\hat{c}_{\varepsilon}, where summation is implied over a repeated index. The nonlinear heterogeneous precipitation/dissolution reaction of solute M\mathcal{M} at the solid grains boundary can be modelled through the following boundary condition on Γε\Gamma^{\varepsilon}

−n⋅D^∇^c^ε=k^(c^εa−cˉa),x^∈Γε(4)-\mathbf{n}\cdot\hat{\mathbf{D}}\hat{\nabla}\hat{c}_{\varepsilon}=\hat{k}\left(\hat{c}_{\varepsilon}^{a}-\bar{c}^{a}\right),\qquad\hat{\mathbf{x}}\in\Gamma^{\varepsilon} \tag*{(4)}

which represents a mass balance across the solid-liquid interface. (3) is subject to initial conditions

c^ε(x^,0)=c^in(x^),x^∈Ω^pε(5)\hat{c}_{\varepsilon}(\hat{\mathbf{x}},0)=\hat{c}_{\mathrm{in}}(\hat{\mathbf{x}}),\qquad\hat{\mathbf{x}}\in\hat{\Omega}_{p}^{\varepsilon} \tag*{(5)}

and boundary conditions on ∂Ω^=∂Ω^D∪∂Ω^N∪∂Ω^R\partial\hat{\Omega}=\partial\hat{\Omega}_{D}\cup\partial\hat{\Omega}_{N}\cup\partial\hat{\Omega}_{R}, where ∂Ω^i\partial\hat{\Omega}_{i}, i={D,N,R}i=\{D,N,R\} represent a portion of the boundary subject to Dirichlet, Neumann or Robin boundary conditions, respectively. Without loss of generality, we assume ∂Ω^D\partial\hat{\Omega}_{D} is subject to time-varying boundary conditions, i.e.

c^ε(x^D,t^)=c^D(t^).(6)\hat{c}_{\varepsilon}(\hat{\mathbf{x}}_{D},\hat{t})=\hat{c}_{D}(\hat{t}). \tag*{(6)}

The previous boundary condition models a spatially localized seasonal release of reacting solute (e.g. contaminant or nutrient), associated to, e.g., respiration processes of bacteria, hydrologic cycles that create local chemical hotspots (e.g. in the hyporheic corridor), etc. We emphasize that other time-dependent boundary conditions could be used in place of (15), e.g. Danckwerts’ [18].

Dimensionless formulation

We define the following dimensionless quantities

c=c^εc^in,D=D^D,x=x^L,vε=v^εU,t=t^τc,p=p^L2νUL(7)c=\frac{\hat{c}_{\varepsilon}}{\hat{c}_{\mathrm{in}}},\qquad\mathbf{D}=\frac{\hat{\mathbf{D}}}{D},\qquad\mathbf{x}=\frac{\hat{\mathbf{x}}}{L},\qquad\mathbf{v}_{\varepsilon}=\frac{\hat{\mathbf{v}}_{\varepsilon}}{U},\qquad t=\frac{\hat{t}}{\tau_{c}},\qquad p=\frac{\hat{p}L^{2}}{\nu UL} \tag*{(7)}

where UU, DD and τc\tau_{c} are characteristic scales for velocity, diffusivity and time. We set τc\tau_{c} as the diffusive time-scale, i.e.

τc=L2D,(8)\tau_{c}=\frac{L^{2}}{D}, \tag*{(8)}

Inserting (8) and (9) in (2)-(15), one obtains

References

  1. [1]Abraham, F. F., J. Q. Broughton, N. Bernstein, and E. Kaxiras (1998), Spanning the length scales in dynamic simulations, Comput. Phys., 12(538).DOI
  2. [2]Acharya, R. C., S. E. A. T. M. Van der Zee, and A. Leijnse (2005), Transport modeling of nonlinearly adsorbing solutes in physically heterogeneous pore networks, Water Resour. Res., 41(2).DOI
  3. [3]Alexander, F. J., A. L. Garcia, and D. M. Tartakovsky (2002), Algorithm refinement for stochastic partial differential equations: 1. Linear diffusion, J. Comput. Phys., 182, 47–66.
  4. [4]Alexander, F. J., A. L. Garcia, and D. M. Tartakovsky (2005), Noise in algorithm refinement methods, Comput. Sci. Eng., 7(3), 32–38.DOI
  5. [5]Allaire, G., A. Mikelic, and A. Piatnitski (2010), Homogenization approach to the dispersion theory for reactive transport through porous media, SIAM J. Math. Anal., 42(1), 125–144.DOI
  6. [6]Arbogast, T., G. Pencheva, M. F. Wheeler, and I. Yotov (2007), A multiscale mortar mixed finite element method, Multiscale Model. Simul., 6(1), 319–346.DOI
  7. [7]Auriault, J. L. (1991), Heterogenous medium. is an equivalent macroscopic description pos-sible?, Int. J. Engng Sci., 29(7), 785–795.
  8. [8]Auriault, J.-L. (2019), Comments on the paper “theory and applications of macroscale mod-els in porous media” by ilenia battiato et al, Transport in Porous Media, 130(2), 611–612.DOI
  9. [9]Auriault, J.-L., and P. M. Adler (1995), Taylor dispersion in porous media: analysis by multi-ple scale expansions, Adv. Water Resour., 18(4), 217–226.DOI
  10. [10]Beese, F., and P. J. Wierenga (1980), Solute transport through soil with adsorption and root water uptake computed with a transient and a constant-flux, Soil Sci., 129(245).DOI
  11. [11]Bensoussan, A., J.-L. Lions, and G. Papanicolaou (1978), Asymptotic analysis for periodic structures, vol. 5, North-Holland Publishing Company Amsterdam.
  12. [12]Bogers, J., K. Kumar, P. H. L. Notten, J. F. M. Oudenhoven, and I. S. Pop (2013), A multiscale domain decomposition approach for chemical vapor deposition, J. Comput. Appl. Math., 246, 65–73.DOI
  13. [13]Brenner, H. (1980), Dispersion resulting from flow through spatially periodic porous media, Philos. T. Roy. Soc. A, 297(1430), 81–133.DOI
  14. [14]Brenner, H. (1987), Transport Processes in Porous Media, McGraw-Hill.
  15. [15]Bresler, E., and G. Dagan (1982), Unsaturated flow in spatially variable fields: 3. Solute transport models and their application to two fields, Water Resour. Res., 19, 429–435.DOI
  16. [16]Bringedal, C., I. Berre, I. S. Pop, and F. A. Radu (2016), Upscaling of nonisothermal reactive porous media flow under dominant Péclet number: The effect of eganging porosity, SIAM Multiscale Model Simul., 14(1), 502–533.DOI
  17. [17]Cushman, J. H., L. S. Bennethum, and B. X. Hu (2002), A primer on upscaling tools for porous media, Adv. Water Resour., 25(8), 1043–1067.DOI
  18. [18]Danckwerts, P. V. (1953), Continuous flow systems: Distribution of residence times, Chem. Eng. Sci., 2, 1–13.
  19. [19]Davit, Y., and M. Quintard (2012), Comment on ‘Frequency-dependent dispersion in porous media’, Phys. Rev. E, 86(013201).pubmed.ncbi.nlm.nih.gov/23005479
  20. [20]Davit, Y., C. G. Bell, H. M. Byrne, L. A. C. Chapman, L. S. Kimpton, G. E. Lang, K. H. L. Leonard, J. M. Oliver, N. C. Pearson, R. J. Shipley, et al. (2013), Homogenization via formal multiscale asymptotics and volume averaging: How do the two techniques compare?, Adv. Water Resour., 62, 178–206.DOI
  21. [21]Dentz, M., and J. Carrera (2003), Effective dispersion in temporally fluctuating flow through a heterogeneous medium, Phys. Rev. E, 68(3), 036,310.pubmed.ncbi.nlm.nih.gov/14524893
  22. [22]Fish, J., and W. Chen (2004), Space–time multiscale model for wave propagation in hetero-geneous media, Comput. Method Appl. M., 193(45), 4837–4856.DOI
  23. [24]Ganis, B., M. Juntunen, G. Pencheva, M. F. Wheeler, and I. Yotov (2014), A global jacobian method for mortar discretizations of nonlinear porous media flows, SIAM J. Sci. Comput., 36(2), A522–A542.DOI
  24. [25]Gray, W. G., and C. T. Miller (2005), Thermodynamically constrained averaging theory ap-proach for modeling flow and transport phenomena in porous medium systems: 1. motiva-tion and overview, Adv. Water Resour., 28(2), 160–180.DOI
  25. [26]Gray, W. G., and C. T. Miller (2014), Introduction to the Thermodynamically Constrained Averaging Theory for Porous Medium Systems - Advances in Geophysical and Environ- mental Mechanics and Mathematics, Springer International Publishing.
  26. [27]Hadjiconstantinou, N., and A. Patera (1997), Heterogenous atomistic-continuum representations for dense fluid systems, Int. J. Mod. Phys. C, 8(967).DOI
  27. [29]Helming, R., B. Flemisch, M. Wolff, A. Egibig, and H. Class (2013), Model coupling for multiphase flow in porous media, Adv. Water Resour., 51, 52–66.
  28. [30]Hornung, U. (2012), Homogenization and porous media, vol. 6, Springer Science & Business Media.
  29. [31]Hornung, U., W. Jäger, and A. Mikelić (1994), Reactive transport through an array of cells with semi-permeable membranes, RAIRO-Modélisation mathématique et analyse numérique, 28(1), 59–94.
  30. [32]Kumar, K., T. L. van Noorden, and I. S. Pop (2011), Effective dispersion equations for reactive flows involving free boundaries at the microscale, SIAM Multiscale Model Simul., 9(1), 29–58.
  31. [33]Kumar, K., T. van Noorden, and I. S. Pop (2014), Upscaling of reactive flows in domains with moving oscillating boundaries, Discrete Contin. Dyn. Syst. Ser. S, 7(1), 95–111.
  32. [34]Mehmani, Y., and M. T. Balhoff (2014), Bridging from pore to continuum: A hybrid mortar domain decomposition framework for subsurface flow and transport, SIAM Multiscale Model. Sim., 12(2), 667–693.
  33. [35]Mehmani, Y., T. Sun, M. T. Balhoff, P. Eichhubl, and S. Bryant (2012), Multiblock pore-scale modeling and upscaling of reactive transport: Application to carbon sequestration, Transp. Porous Med., 95(2), 305–326.
  34. [36]Mikelic, A., V. Devigne, and C. J. Van Duijn (2006), Rigorous upscaling of the reactive flow through a pore, under dominant peclet and damkohler numbers, SIAM J. Math. Anal., 38(4), 1262–1287.
  35. [37]Miller, C. T., C. N. Dawson, M. W. Farthing, T. Y. Hou, J. Huang, C. E. Kees, C. T. Kelley, and H. P. Langtangen (2013), Numerical simulation of water resources problems: models, methods and trends, Adv. Water Resour., 51, 405–437.
  36. [38]Moyne, C. (1997), Two-equation model for a diffusive process in porous media using the volume averaging method with an unsteady-state closure, Adv. Water Resour., 20(2-3), 63–76.
  37. [39]Nissan, A., I. Dror, and B. Berkowitz (2017), Time dependent velocity field controls on anomalous chemical transport in porous media, Water Resour. Res., 53(5), 3760–3769.
  38. [41]Pavliotis, G. A., and P. R. Kramer (2002), Homogenized transport by a spatiotemporal mean flow with small-scale periodic fluctuations, in Proc. of the IV International Conference on Dynamical Systems and Differential Equations, May, pp. 24–27.
  39. [42]Pavliotis, G. A., and A. Stuart (2008), Multiscale methods: averaging and homogenization, Springer Science & Business Media.DOI
  40. [43]Peszyńska, M., M. F. Wheeler, and I. Yotov (2002), Mortar upscaling for multiphase flow in porous media, Comput. Geosci., 6, 73–100.
  41. [44]Pool, M., V. E. Post, and C. T. Simmons (2014), Effects of tidal fluctuations on mixing and spreading in coastal aquifers: Homogeneous case, Water Resour. Res., 50(8), 6910–6926.
  42. [45]Pool, M., V. E. A. Post, and C. T. Simmons (2015), Effects of tidal fluctuations and spatial heterogeneity on mixing and spreading in spatially heterogeneous coastal aquifers, Water Resour. Res., 51(3), 1570–1585.
  43. [46]Pool, M., M. Dentz, and V. E. Post (2016), Transient forcing effects on mixing of two fluids for a stable stratification, Water Resour. Res., 52(9), 7178–7197.
  44. [47]Pope, S. B. (2000), Turbulent flows, Cambridge University Press, Cambridge, NY.DOI
  45. [48]Rajabi, F. (2021), Stochastic models for nonlinear transport in multiphase and multiscale heterogeneous media, Ph.D. thesis, Stanford University.
  46. [49]Rajabi, F., and I. Battiato (2015), Spatio-temporal upscaling of reactive transport in porous media for ultra-long time predictions: Theory and numerical experiments, in AGU Fall Meeting Abstracts, vol. 2015, pp. H51F–1434.
  47. [50]Rajabi, F., and I. Battiato (2017), Frequency dependent macro-dispersion induced by oscillatory inputs and spatial heterogeneity, in AGU Fall Meeting Abstracts, vol. 2017, pp. H11G–1276.
  48. [51]Roubinet, D., and D. M. Tartakovsky (2013), Hybrid modeling of heterogeneous geochemical reactions in fractured porous media, Water Resour. Res., 49(12), 7945–7956.DOI
  49. [52]Russo, D., W. A. Jury, and G. L. Butters (1989), Numerical analysis of solute transport during transient irrigation: 1. The effect of hysteresis and profile heterogeneity, Water Resour. Res., 25, 2109–2128.
  50. [53]Shapiro, M., and H. Brenner (1988), Dispersion of a chemically reactive solute in a spatially periodic model of a porous medium, Chemical engineering science, 43(3), 551–571.DOI
  51. [54]Shenoy, V. B., R. Miller, E. B. Tadmor, D. Rodney, R. Phillips, and M. Ortiz (1999), An adaptive finite element approach to atomic-scale mechanics-the quasicontinuum method, J. Mech. Phys. Solids, 47(611).
  52. [55]Smith, R. (1981), A delay-diffusion description for contaminant dispersion, J. Fluid Mech., 105, 469–486.DOI
  53. [56]Smith, R. (1982), Contaminant dispersion in oscillatory flows, J. Fluid Mech., 114, 379–398.DOI
  54. [57]Stegen, J. C., J. K. Fredrickson, M. J. Wilkins, A. E. Konopa, W. /c. Nelson, E. V. Arntzen, W. B. Chrisler, R. Chu, R. E. Danczak, S. J. Fansler, D. W. Kennedy, C. T. Resch, and M. M. Tfaily (2016), Groundwater-surface water mixing shifts ecological assembly processes and stimulates organic carbon turnover, Nature Commun., 7(11237).
  55. [58]Tartakovsky, A. M., D. M. Tartakovsky, T. D. Scheibe, and P. Meakin (2008), Hybrid simulations of reaction-diffusion systems in porous media, SIAM J. Sci. Comput., 30(6), 2799–2816.DOI
  56. [59]Tartakovsky, D. M. (2013), Assessment and management of risk in subsurface hydrology: A review and perspectives, Adv. Water Resour., 51, 247–260.DOI
  57. [60]Taverniers, S., and D. M. Tartakovsky (2017), A tightly-coupled domain-decomposition approach for highly nonlinear stochastic multiphysics systems, J. Comput. Phys., 330, 884–901.DOI
  58. [61]Taylor, G. (1953), Dispersion of soluble matter in solvent flowing slowly through a tube, in P. Roy. Soc. Lond. A Mat., vol. 219, pp. 186–203. The Royal Society.DOI
  59. [62]Taylor, G. I. (1959), The present position in the theory of turbulent diffusion, Adv. Geophys., 6, 101–112.DOI
  60. [63]Tiwari, S., and A. Klar (1998), Coupling of the Boltzmann and Euler equations with adaptive domain decomposition procedure, J. Comput. Phys., 144(710).DOI
  61. [64]Valdes-Parada, F. J., and J. Alvarez Ramirez (2011), Frequency-dependent dispersion in porous media, Phys. Rev. E, 84(031201).
  62. [65]Valdes-Parada, F. J., and J. Alvarez Ramirez (2012), Reply to “Comment on ‘Frequency-dependent dispersion in porous media’”, Phys. Rev. E, 86(013202).
  63. [66]van Noorden, T. L., I. S. Popo, A. Ebigbo, and R. Helming (2010), An upscaled model for biofilm growth in a thin strip, Water Resour. Res., 46(W06505).DOI
  64. [67]Wadsworth, D. C., and D. A. Erwin (1990), One-dimensional hybrid continuum/particle simulation approach for rarefied hypersonic flows, AIAA Paper, 90-1690.
  65. [68]Wang, P., P. Quinland, and D. M. Tartakovsky (2009), Effects of spatio-temporal variability of precipitation on contaminant migration in the vadose zone, Geophys. Res. Lett., 36(L12404).DOI
  66. [69]Whitaker, S. (1999), The method of volume averaging, vol. 13, Springer Science & Business Media.DOI
  67. [70]Wood, B. D. (2009), The role of scaling laws in upscaling, Adv. Water Resour., 32(5), 723–736.DOI
  68. [71]Wood, B. D., and F. J. Valdes-Parada (2013), Volume averaging: local and nonlocal closures using a green’s function approach, Adv. Water Resour., 51, 139–167.DOI
  69. [72]Wood, B. D., F. Cherblanc, M. Quintard, and S. Whitaker (2003), Volume averaging for determining the effective dispersion tensor: Closure using periodic unit cells and comparison with ensemble averaging, Water Resour. Res., 39(8).DOI
  70. [73]Yin, Y., J. f. sykes, and S. D. Normani (2015), Imoacts of spatial and temporal recharge on field-scale contaminant transport model calibration, J. Hydrol., 527, 77–87.DOI
  71. [74]Yousefzadeh, M. (2020), Numerical Simulation of Fluid-Mineral Interaction and Reactive Transport in Porous and Fractured Media, Stanford University.

Paper details

vlnc:W_bu9xsvnp
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents