betaFeedback

WorksPhysics and Astronomy

Original Ultra-hard Orthorhombic Carbon allotropes C8 with lonsdaleite-type lon topology: Crystallographic and DFT investigations

Abstract

The lon topology inherent to lonsdaleite C4 hexagonal diamond is shown to characterize three original carbon allotropes C8 in the orthorhombic system with irregular orientations of the C4 tetrahedra. The octacarbon stoichiometries were devised from crystal structure engineering and identified close to lonsdaleite from density functional theory (DFT) based calculations of ground state structures and energy derived physical properties. Characterized with high densities, the three allotropes are identified with ultra hard with hardness magnitudes close and superior to lonsdaleite. Dynamically, all three allotropes were found stable with positive frequencies revealed from their phonons band structures with specific heat CV = f(T) calculated curves close to diamond experimental values from literature.

Introduction

The field of carbon research occupies a particular position among scientists of the solid-state, especially with the search of allotropes related to diamond’s exceptional physical properties. Also, original artificial allotropes with similar mechanical and thermal properties to diamond are regularly proposed based on crystal structure engineering [1] or using structure prediction codes as USPEX [2]. A library of such original and mainly artificial carbon edifices was established for storing the devised structures, namely the SACADA database [3, 4]. The classification is based on topology analysis using TopCryst program [5]. For instance, diamond is identified with dia label while its rare hexagonal form lonsdaleite first announced by Bundy and Kasper back in 1967 [6] is labeled lon. Questioning its very existence, Németh et al. declared in 2014 that lonsdaleite was actually “a faulted and twinned cubic diamond and does not exist as a discrete material” [7]. The lon topology occurs in SACADA four times: No. 37 (lonsdaleite itself), 38, 128, and lon-a for No. 1189. As lonsdaleite, all lon carbon allotropes crystallize in the hexagonal system with P63/mmcP6_{3}/mmc No. 194 and P6ˉm2P\bar{6}m2 No. 186 space groups.

Regarding the density criterion, both diamond and lonsdaleite possess high densities of ρ∼3.52 g/cm3\rho\sim3.52\ \mathrm{g/cm^{3}} arising from the perfectly covalent character of the C-C short connections (1.54 Å) within C(sp3\mathrm{sp}^{3})-like tetrahedral carbon resulting in a high (Vickers) hardness HV≥95H_{\mathrm{V}} \ge95 GPa. However, based on first principles calculations lonsdaleite was announced stiffer and harder than diamond [8]. Such quantum mechanics computations usually carried out in the framework of the widely adopted Density Functional Theory (DFT) framework [9, 10] are a powerful predictive tool of ground state structures and energy derived properties as the physical ones (elastic properties, phonons, electronic band structures, …). For instance, an artificial carbon allotrope with qtz topology (i.e., quartz-based) was announced as denser than diamond, with ρ=3.67 g/cm3\rho= 3.67\ \mathrm{g/cm^{3}} and subsequent higher Vickers hardness HV∼100H_{\mathrm{V}} \sim100 GPa, (cf. [11] and therein cited works). Such properties arise from the structural local modifications as the presence of strongly distorted C4 tetrahedra and the manner they are connected; mainly corner sharing (cf. Figure 1a relevant to diamond). Nevertheless, such systems are considered as metastable versus diamond despite their computed mechanical, dynamic, thermodynamic stabilities. Considering lonsdaleite shown in Figure 1b, it is characterized by four atoms at 4f4f position of the high symmetry space group P63/mmcP6_{3}/mmc No. 194 (Table 1). In preliminary trials, it was noted that resolving the structure in orthorhombic symmetry through crystallography engineering using the lonsdaleite atomic coordinates, a trend of transformation into 8 atoms C8C_{8} systems with 3D tetrahedral structure was noticed. This characterizes the presently proposed original orthorhombic C8C_{8} structures in three different orthorhombic space groups. The crystallographic findings were necessarily backed with DFT investigations of the ground state structures and the energy dependent physical properties. The orthorhombic C8C_{8} allotropes were identified with Ion topology known, as discussed above, to characterize hexagonal carbon allotropes. Our interest herein is not to question the existence of lonsdaleite as such but to show that Ion topology cal also be found in another symmetry than hexagonal systems with stackings of C4C4 tetrahedra, different from lonsdaleite.

Space groupP63/mmcP6_{3}/mmc No.194 C4C_{4} lonsdaleiteC2221C222_{1} No.20 C8C_{8}Pmc21Pmc2_{1} No.26 C8C_{8}Ama2Ama2 No.40 C8C_{8}
a, Å2.505 (2.51 [6])4.33844.16914.1690
b, Å-2.50552.50504.3387
c, Å4.168 (4.12 [6])4.16904.31442.5055
Shortest dist. Å1.541.541.541.54
Angle ∠\angleC-C-C °109.47109.1109.9109.06
Volume, Å3^{3}22.6645.3245.3145.31
V/at., Å3^{3}5.675.675.665.66
Density ρ\rho (g/cm3^{3})3.53.523.523.52
Atomic positionsC1 (4f) 1/3, 2/3, 0.0627C1 (8c) 0.1667, ½, 0.8128C1 (4c) 0.6872, ¾ 0.9139; C2 (4c) 0.1872, ¼ 0.0806C1 (8c) 0.5628, 0.8333, 0.4
EtotalE_{\mathrm{total}}, eV-36.28-72.6-72.55-72.55
Etot./at.E_{\mathrm{tot.}/\mathrm{at.}}, eV-9.07-9.08-9.06-9.06
Ecoh/at.E_{\mathrm{coh/at.}}, eV-2.48-2.48-2.47-2.47

Table 1. Crystal structural properties of carbon allotropes with Ion topology.

Image not extracted

Figure 1. Crystal structures in ball and stick and polyhedral representations of a) Diamond C8\mathrm{C}_{8}, b) Lonsdaleite C4\mathrm{C}_{4}, and the orthorhombic C8\mathrm{C}_{8} allotropes with lon topology designated with their respective space groups: c) C2221\mathrm{C}222_{1}, d) Pmc21\mathrm{Pmc}2_{1}, and e) Ama2\mathrm{Ama}2.

After this Introduction, the paper is organized as follows: the Theoretical framework and the Computational methodology are given in § 2; the Crystal Structure characteristics are presented in § 3; the Mechanical properties from the elastic constants are addressed in § 4; the Dynamic properties from the Phonons are detailed in § 5 and the pertaining Temperature dependence of the heat capacity in comparison with Diamond experimental data is given in Section 5. Section 6 presents the Electronic band structures. The paper is ended with a Conclusion.

Theoretical framework and Computational methodology

To determine the ground state structures corresponding to energy minima and to derive the mechanical, dynamic properties and the electronic structures, quantum mechanics computations were carried out based on the widely adopted framework of the density functional theory DFT [9, 10]. Based on the DFT, the calculations were performed using the Vienna Ab initio Simulation Package (VASP) code [12, 13] and the Projector Augmented Wave (PAW) method [13, 14] for the atomic potentials. DFT exchange-correlation (XC) effects were considered using the generalized gradient approximation (GGA) [15]. Relaxation of the atoms onto the ground state structures was performed with the conjugate gradient algorithm according to Press et al. [16]. The Bloechl tetrahedron method [17] with corrections according to the scheme of Methfessel and Paxton [18] was used for geometry optimization and energy calculations. Brillouin-zone (BZ) integrals were approximated by a special kk-point sampling according to Monkhorst and Pack [19]. Structural parameters were optimized until atomic forces were below 0.02 eV/A˚0.02\ \mathrm{eV}/\mathring{\mathrm{A}} and all stress components <0.003 eV/A˚3< 0.003\ \mathrm{eV}/\mathring{\mathrm{A}}^{3}. The calculations were converged at an energy cutoff of 400 eV for the plane-wave basis set in terms of the automatic high precision kk-point integration in the reciprocal space to obtain a final convergence and relaxation to zero strains for the original stoichiometries presented in this work. In the post-processing of the ground state electronic structures, the charge density projections were operated on the lattice sites.

The mechanical stabilities were obtained from the calculations of the elastic constants CijC_{ij} subsequently treated with ELATE online program [20]. The outcome provides the bulk (B) and shear (G) modules along different averaging methods; the Voigt method [21] was adopted herein for BVB_\mathrm{V} and GVG_\mathrm{V}. The methods of microscopic theory of hardness by Tian et al. [22] and Chen et al. [23] were used to estimate the Vickers hardness (HVH_\mathrm{V}) from the bulk and shear modules BVB_\mathrm{V} and GVG_\mathrm{V} (vide infra).

The dynamic stabilities were confirmed by the calculation of the phonons band structures all presenting positive phonon frequencies. The corresponding phonon band structures were obtained from a high resolution of the orthorhombic Brillouin zone according to Togo et al. [24].

Experimental specific heat CVC_\mathrm{V} data of diamond needed to assess the calculated results of the three 3D allotropes were obtained from Victor works [25]. The electronic band structures were obtained using the all-electron DFT-based ASW method [26] and the GGA XC functional [15]. The VESTA (Visualization for Electronic and Structural Analysis) program [27] was used to visualize the crystal structures.

Crystal structures

Despite the close structural properties of both diamond (cubic) and lonsdaleite (hexagonal) being built-up with C4C_4 tetrahedra in a three-dimensional network, they exhibit differences regarding the stacks of tetrahedra: they are oriented in the same direction in diamond and alternately oriented in lonsdaleite. These differentiating aspects are illustrated in Figure 1a and Figure 1b. The original orthorhombic C8C_8 (Figure 1c – Figure 1d) showing these features are identified in orthorhombic space groups C2221C222_1 No. 20, Pmc21Pmc2_1 No. 26, and Ama2Ama2 No. 40. From Table 1, lonsdaleite calculated aa and cc lattice parameters show differences with respect to Bundy and Kasper 1967 paper values with a smaller cc lattice constant [6] but they remain within accepted range. The crystal structure characteristics of the C8C_8 allotropes are close to lonsdaleite regarding the interatomic distances, the C4C4 tetrahedron angle of 109°, the atom average volume close to 5.675.67 Å3^{3}, and the density ρ=3.52\rho= 3.52 g/cm3^{3}. Note that C8_{8} Pmc21_{1} No. 26 shows two sites for the atomic positions that are related to each other with a translation ½ ½ ±x, however a search for a higher symmetry orthorhombic space group was not successful.

Regarding the energy, the atom averaged cohesive magnitudes are the same and equal to Ecoh_{\mathrm{coh}}/at.(diamond) = -2.47 eV. Finally, the Topcryst program analysis showed that the topological mapping is Ion.

From the crystal structure assessments, physical properties close to lonsdaleite can be expected. The following sections of the paper are devoted to further analyze the mechanical, dynamic thermodynamic, and electronic structures properties of the three C8_{8} allotropes carried out in comparison to lonsdaleite.

Mechanical properties from the elastic constants

The investigation of the mechanical properties was based on the calculations of the elastic properties determined by performing finite distortions of the lattice and deriving the elastic constants from the strain-stress relationship. The calculated sets of elastic constants CijC_{ij} (i and j indicate directions) are given in Table 2. All CijC_{ij} values are positive signaling stability of the three allotropes as well as lonsdaleite. The products obey the stability rules regarding the orthorhombic system:

CijC_{ij}C11C_{11}C22C_{22}C12C_{12}C13C_{13}C33C_{33}C44C_{44}C55C_{55}C66C_{66}
C2221C_{2221}12111206104141327551464464
Pmc21\mathit{Pmc}_{21}13131208341204464550466
Ama2\mathit{Ama}_{2}1329120615151205464550465
C4(pw)C_{4}(pw)1192-123141327553-465

Table 2. Orthorhombic C8C_{8} and Lonsdaleite C4C_{4}. Elastic Constants CijC_{ij} in GPa.

Cii (i=1,4,5,6)>0.C_{ii}\ (i=1, 4, 5, 6) > 0.
C11C22−C122>0; C11C22C33+2C12C13C23−C11C232−C22C132−C33C122>0.C_{11}C_{22} - C_{12}^{2} > 0; \ C_{11}C_{22}C_{33} + 2C_{12}C_{13}C_{23} - C_{11}C_{23}^{2} - C_{22}C_{13}^{2} - C_{33}C_{12}^{2} > 0.

Using ELATE program introduced above [20], the bulk and the shear modules obtained by averaging the elastic constants using Voigt's [21] method are given in Table 3, namely BVB_{\mathrm{V}} and GVG_{\mathrm{V}}. Table 3 displays the mechanical properties. Large similar magnitudes of the bulk modulus BVB_{\mathrm{V}} ~440 GPa are observed for lonsdaleite C4_{4} and the other C8_{8} allotropes. From literature Wang [28] announced a magnitude of 434 GPa using GGA DFT XC functional as in the present work. Similarly, the shear moduli are systematically larger. Note that BVB_{\mathrm{V}} and GVG_{\mathrm{V}} are within range of diamond’s: BVB_{\mathrm{V}} =444 GPa and GVG_{\mathrm{V}}= 534 GPa [29]. The corresponding Pugh ratios GV/BVG_{\mathrm{V}}/B_{\mathrm{V}} [30] relevant to “ductile-to-brittle” criteria were then calculated. For GV/BV<1G_{\mathrm{V}}/B_{\mathrm{V}} < 1 a trend to ductile behavior is expected whereas for GV/BV>1G_{\mathrm{V}}/B_{\mathrm{V}} > 1 a brittle behavior is predicted. All Pugh ratios are found larger than unity letting deduct significant brittleness within range of the value of diamond: GV/BVG_{\mathrm{V}}/B_{\mathrm{V}} = 1.20. Note that the largest ratio is obtained for C8C_8 Pmc21\mathit{Pmc}_{21}. Such magnitudes of Pugh ratios are translated into the Vickers hardness Hv calculated along with two models of microscopic theory of hardness:

BVB_{\mathrm{V}}GVG_{\mathrm{V}}GV/BVG_{\mathrm{V}}/B_{\mathrm{V}}HV1H_{\mathrm{V}}^{1}HV2H_{\mathrm{V}}^{2}
C2221C_{2221}4455371.219897
Pmc21\mathit{Pmc}_{21}4375371.2399100
Ama2\mathit{Ama}_{2}4455301.199595
C4(pw)C_{4}(pw)4445341.179796

Table 3. Orthorhombic C8C_{8} and Lonsdaleite C4C_{4}. Voigt-average properties of bulk BVB_{\mathrm{V}} and shear GVG_{\mathrm{V}} modules and hardness magnitudes along to models (GPa units).

Hv1=0.92(GVBV)1.137GV0.708 (Tian et al.)\mathrm{Hv}^{1}=0.92\left(\frac{G_V}{B_V}\right)^{1.137}G_V^{0.708}\ \text{(Tian et al.)}

[22]

Hv2=2(GV2BV2)0.585−3 (Chen et al.)\mathrm{Hv}^{2}=2\left(\frac{G_V^2}{B_V^2}\right)^{0.585}-3\ \text{(Chen et al.)}

[23]

Both equations show similar magnitudes of Vickers hardness with an exceptionally high value for C8C_8 Pmc21\mathit{Pmc}_{21} as it can be expected from the large Pugh ratio, followed by C8C_8 C2221. Consequently, it can be concluded that the three Ion orthorhombic allotropes follow closely lonsdaleite with slightly better mechanical properties of ultra-hardness.

Dynamic and thermodynamic properties

To verify the dynamic stability of the C8C_8 orthorhombic carbon allotropes, an analysis of their phonon properties was performed concomitantly with lonsdaleite. The phonon band structures were obtained from a high resolution of the hexagonal Brillouin zone BZ for lonsdaleite and the orthorhombic BZ for the three C8C_8 allotropes, according to Togo et al. method [24]. Figure 2 shows them in four panels. The bands (red lines) develop along the main directions of the orthorhombic Brillouin zone (horizontal xx-axis), separated by vertical lines for better visualization, while the vertical direction (yy-axis) represents the frequencies ω\omega, given in terahertz (THz).

Phonon band structures along the major lines of the orthorhombic Brillouin zone

Figure 2. Phonon band structures along the major lines of the orthorhombic Brillouin zone. a) Lonsdaleite C4C_{4}, and orthorhombic C8C_{8}: b) C2221C222_{1}, c) Pmc21Pmc2_{1}, and d) Ama2Ama2.

For each crystal system the phonons band structures include 3N3N bands (NN number of atoms) describing three acoustic modes starting from zero energy (ω=0\omega= 0) at the Γ\Gamma point, i.e. BZ center, and reaching up to a few terahertz THz, and 3N−33N-3 optical modes at higher energies. The low-frequency acoustic modes are associated with the rigid translation modes of the crystal lattice, i.e., two transverse and one longitudinal. The phonon frequencies are found all positive, indicating that the allotropes are dynamically stable, alike lonsdaleite. However, a slight trend to negative acoustic frequencies at BZ center is observed for C8C_8 C2221 (Figure 2b) that were not removed with higher resolution BZ integration. This does not deem the allotrope as unstable and shows that the novel allotropes whilst being close to lonsdaleite, are different from it.

The highest bands are observed around 40 THz for lonsdaleite C4C_4 as well as for the orthorhombic C8C_8 allotropes. Note that ω=40\omega= 40 THz magnitude is close to the value observed for diamond by Raman spectroscopy [31], letting expect relationship with diamond for all systems. Such an assumption needs to be supported by further analysis of the thermal properties of the three allotropes in comparison to diamond.

Temperature dependence of the heat capacity

The thermodynamic properties were calculated from the phonon frequencies using the statistical thermodynamic approach [32] on a high-precision sampling mesh in the orthorhombic BZ. The temperature dependencies of the entropy SS and the heat capacity CVC_{\mathrm{V}} are presented in four panels in Figure 3. We also report the available experimental CVC_{\mathrm{V}} discrete data for diamond [25]. The entropy (black curve) increases with temperature as expected from increased disorder with TT. The calculated CV=f(T)C_{\mathrm{V}} = f(T) curves increase almost linearly up to ~400K then there is a curving down for higher temperatures. Considering experimental data, the curves follow the discrete points of diamond with a better fit observed for C8_8 allotropes than for lonsdaleite. In view of the closest resemblance with diamond from the point of view of the most relevant characteristic, namely the extreme hardness shown by C8_8 allotropes. Such resemblance should be illustrated by the electronic band structure.

Image not extracted

Figure 3. Temperature dependence of the Entropy (S) and the Specific Heat CVC_{\mathrm{V}} of C4C_{4} lonsdaleite and orthorhombic C8C_{8} with Ion topology.

Electronic band structures

Using the crystal parameters in Table 1, the electronic band structures were obtained for lonsdaleite and the three carbon allotropes using the all-electrons DFT-based augmented spherical wave method (ASW) [26] and GGA XC approximation [15]. The band structures are displayed in Figure 4.

Image not extracted

(a)

Image not extracted

(b)

Image not extracted

(c)

Image not extracted

(d)

Figure 4. Electronic band structures of C4C_{4} Lonsdaleite (a) and orthorhombic C8C_{8} with Ion topology: b) C8C_{8} C2221C222_{1}, c) C8C_{8} Pmc21Pmc2_{1}, and d) C8C_{8} Ama2Ama2.

The bands develop along the main directions of the primitive orthorhombic Brillouin zone. Along the vertical direction all three panels exhibit an energy gap signaling a semiconducting to insulating behavior. The zero energy is then considered EV_{\mathrm{V}}, i.e. at the top of the valence band (V) separated from the higher energy conduction band (C). In Figure 4a representing archetype lon C4_4 the band gap is large with ~5 eV and indirect as it occurs between ΓV\Gamma_{\mathrm{V}} and KC_{\mathrm{C}} of the hexagonal BZ (Γ\Gamma designates BZ center). The C8_8 allotropes in Figure 4b (C2221) and Figure 4c (Pmc21_1) also show large band gaps of similar magnitude with an indirect character. Lastly, in C8_8 Ama2 (Figure 4d) the large gap is of direct character occurring between ΓV\Gamma_{\mathrm{V}} and ΓC\Gamma_{\mathrm{C}}, of the orthorhombic BZ. Then the three C8 allotrope show close albeit different electronic band structures versus lonsdaleite.

Conclusion

Based on quantum mechanics calculations of ground state crystal structures and pertaining physical properties, we presented three novel orthorhombic carbon allotropes with C8C_{8} stoichiometry, found to be structurally related to lonsdaleite regarding the stacking of the C4C_{4} tetrahedra. Their subsequent identification in the lon topology usually found for hexagonal carbon systems is an original feature. Specifically, the structures were found with high densification leading to ultra-hard behaviors alike lonsdaleite and diamond. Dynamically, the allotropes were found stable with positive frequencies revealed from their phonons band structures with highest frequencies of 40 THz characteristic of diamond Raman spectroscopy from literature. The thermodynamic properties showed specific heat CVC_{V} curves in agreement with diamond’s literature experimental values, with better agreement than lonsdaleite. It is proposed from this work, a holistic interrelationship: “crystal structure ↔\leftrightarrow mechanical ↔\leftrightarrow dynamic ↔\leftrightarrow electronic properties” for carbon hard materials (material = structure + properties).

Author Contribution: Conceptualization, methodology, investigation, formal analysis, visualization, writing the paper. No A.I. nor other web resources were used.

Funding: This research received no external funding.

Data Availability Statement: The data presented in this study are available upon reasonable request due to LGU university restrictions, i.e., privacy, etc.

Acknowledgments: Computational facilities from the Lebanese German University are gratefully acknowledged.

Conflicts of Interest: The author declares no conflict of interest.

Tables

Figures

Figure 5 (PDF p. 16).

Figure 6 (PDF p. 16).

References

  1. [1]S.F. Matar. Tailoring body center tetragonal allotropes Cx (x= 8, 12, 16, 20) with C (sp3) and hybrid C (sp3)/C (sp2): Crystal chemistry and ab initio investigations of the physical properties. Diamond and Related Materials 148, (2024) 111442.DOI
  2. [2]A. Oganov. Crystal structure prediction: reflections on present status and challenges. Faraday Discuss. 211, (2018) 643.DOI
  3. [3]R. Hoffmann, A. Kabanov, A. A. Golov, D. M. Proserpio. Homo Citans and Carbon Allotropes: For an Ethics of Citation. 55 (2016) 10962-10976.DOI
  4. [4]SACADA (Samara Carbon Allotrope Database). www.sacada.info
  5. [5]V. A. Blatov, A.P. Shevchenko; D. M. Proserpio. Applied topological analysis of crystal structures with the program package ToposPro, Cryst. Growth Des., 14 (2014), 3576–3586.DOI
  6. [6]F. P. Bundy and J. S. Kasper. Hexagonal Diamond—A New Form of Carbon. J. Chem. Phys. 46, (1967) 3437.
  7. [7]P. Németh, L.A.J. Garvie, T. Aoki, N. Dubrovin skaia, L. Dubrovinsky; P. R. Buseck. Lonsdaleite is faulted and twinned cubic diamond and does not exist as a discrete material. Nature Comm. 5, (2014) 5447.DOI
  8. [8]Li Qingkun, Sun Yi, Li Zh iyuan, Zhou Yu. Lonsdaleite – A material stronger and stiffer than diamond. Scripta Materialia, 65, (2011) 229.DOI
  9. [9]P. Hohenberg, W. Kohn. Inhomogeneous electron gas. Phys. Rev. B 136 (1964) 864-871.
  10. [10]W. Kohn, L.J. Sham, Self-consistent equations including exchange and correlation effects. Phys. Rev. A 140 (1965) 1133-1138.
  11. [11]S.F. Matar, VL Solozhenko. First principles Search for novel ultrahard high-density carbon allotropes: hexagonal C₆, C₉, and C₁₂. J. Superhard Mater. 45 (2023) 239–248.DOI
  12. [12]G. Kresse, J. Furthmüller. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54 (1996) 11169.
  13. [13]G. Kresse, J. Joubert. From ultrasoft pseudopotentials to the projector augmented wave. Phys. Rev. B 59 (1999) 1758-1775.
  14. [14]P.E. Blöchl, Projector augmented wave method. Phys. Rev. B 50 (1994) 17953-17979.
  15. [15]J. Perdew, K. Burke, M. Ernzerhof, The Generalized Gradient Approximation made simple. Phys. Rev. Lett. 77 (1996) 3865-3868.
  16. [16]W.H. Press, B.P. Flannery, S.A. Teukolsky, W.T. Vetterling, Numerical Recipes, 2nd ed. Cambridge University Press: New York, USA, 1986.
  17. [17]P.E. Blöchl, O. Jepsen, O.K. Anderson, Improved tetrahedron method for Brillouin-zone integrations. Phys. Rev. B 49 (1994) 16223-16233.
  18. [18]M. Methfessel and A. T. Paxton, High-precision sampling for Brillouin-zone integration in metals. Phys. Rev. B 40, (1989) 3616
  19. [19]H.J. Monkhorst, J.D. Pack, Special k-points for Brillouin Zone integration. Phys. Rev. B 13 (1976) 5188-5192.
  20. [20]R. Gaillac, P. Pullumbi, F.X. Coudert. ELATE: an open-source online application for analysis and visualization of elastic tensors. J. Phys.: Condens. Matter 28 (2016) 275201.DOI
  21. [21]W. Voigt, Über die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper. Annal. Phys. 274 (1889) 573-587.DOI
  22. [22]Y. Tian, B. Xu, Z. Zhao. Microscopic theory of hardness and design of novel superhard crystals. Int. J. Refract. Met. H. 33 (2012) 93–106.DOI
  23. [23]X.-Q. Chen, H. Niu, D. Li, Y. Li, Modeling hardness of polycrystalline materials and bulk metallic glasses, Intermetallics 19 (2011) 1275.DOI
  24. [24]A. Togo, I. Tanaka. First principles phonon calculations in materials science, Scr. Mater. 108 (2015) 1-5.
  25. [25]A.C. Victor. Heat capacity of diamond at high temperatures, J. Chem. Phys., 36 (1962) 1903.
  26. [26]V. Eyert, The Augmented Spherical Wave Method, Lect. Notes Phys. 849 (Springer, Berlin Heidelberg, 2013).
  27. [27]K. Momma, F. Izumi. VESTA3 for three-dimensional visualization of crystal, volumetric and morphology data. J. Appl. Crystallogr., 44 (2011) 1272-1276.
  28. [28]S.Q. Wang. First-principles study on the lonsdaleite phases of C, Si and Ge. J. Phys.: Condens. Matter 15 (2003) L197
  29. [29]V.V. Brazhkin, V.L. Solozhenko. Myths about new ultrahard phases: why materials that are significantly superior to diamond in elastic moduli and hardness are impossible. J Appl Phys 125 (2019) 130901.DOI
  30. [30]O. N. Senkov, D. B. Miracle. Generalization of intrinsic ductile-to-brittle criteria by Pugh and Pettifor for materials with a cubic crystal structure. Scientific Reports |11 (2021) 4531.DOI
  31. [31]Krishnan RS. Raman spectrum of diamond. Nature, 155 (1945)171.
  32. [32]M.T. Dove. Introduction to lattice dynamics. New York, USA: Cambridge University Press; 1993.

Paper details

vlnc:W_bud74t53
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents