The partial Ricci flow (PRF) modifies the Riemannian metric on a foliation on a distribution orthogonal to the leaves. In this work we develop extrinsic representations of PRF on geodesic foliations (twisted/warped products, weak K-contact and weak \b{eta}-Kenmotsu manifolds) and analyze model cases where PRF admits closed-form solutions. Using the convergence of PRF on model cases, we construct its extrinsic representations initialized by rotational hypersurfaces in Euclidean space as well as parallel curved surfaces and ellipsoids. The extrinsic viewpoint for PRF provides new tools for studying curvature-driven dynamics on foliations, with potential applications to calculus of moving surfaces and mathematical physics.
Introduction
By geometric flow we mean the evolution of a metric g on a manifold under a differential equation, ∂tg=B(g), where the tensor B is associated with curvature. The Ricci flow, and the mean curvature flow are most popular geometric flows. In [4, 8, 6] geometric flows on a foliated manifold are studied, the metric g is modified along the normal to the leaves distribution, and the evolution operator is elliptic along the leaves. The partial Ricci flow (PRF), on a foliated manifold (M,F)
∂tg=−2Ricg⊥+2rg⊥,r∈R(1)
where Ricg⊥ is the partial Ricci curvature, and g⊥ is the restriction of g on the distribution D orthogonal to F, is the tool to prescribe the mixed sectional curvature, Kmix. The PRF preserves D and such geometric properties of the leaves as totally umbilical, geodesic or harmonic (minimal) submanifolds. The symmetric (0,2)-tensor Ricg⊥(X,Y)=∑ag(R(X⊥,ea)Y⊥,ea), where {ea} is any local orthonormal basis of D, is called the partial Ricci curvature of a foliation F of (M,g). For a one-dimensional foliation F and a unit vector ξ∈TF, we have Ricg⊥(X,Y)=g(RXξ,ξ,Y)=g(RξX,Y), where Rξ is the Jacobi operator for ξ. For a foliated surface (M2,F,g), we have Ricg⊥=Kg⊥ and Rξ=KID, where K is the gaussian curvature, hence, (1.1) reduces to the D-conformal flow
∂tg=−2(K−r)g⊥.
For better understanding and visualization the geometric flows, we can represent them extrinsically by depicting a submanifold deforming in Euclidean space, when the metric of the flow is the metric induced by the manifold’s embedding. In this paper, we adapt to PRF the following concept, studied in [2] for the Ricci flow.
An extrinsic representation ensures that, given a geometric flow gt on a differentiable manifold M, there is a smooth family of immersions ψt:M→St (t∈R) in a fixed Euclidean space, such that the metric extrinsically induced on St by the ambient Euclidean metric is precisely gt.
This approach is motivated by Nash’s embedding theorems, which state that any Riemannian manifold can be isometrically embedded into some Euclidean space. Moreover, for a short time, one can construct a smooth one-parameter family of isometric embeddings of any smooth parametrized family of Riemannian metrics on a smooth closed manifold into Euclidean space, see [10], in particular, the Ricci flow on Mn can be represented in Rm, where m=max{21n(n+5),21(n+3)+5}.
The PRF exists for a short time, see [6], so what is the relation between m and n for the extrinsic representations of the PRF on a smooth foliated manifold Mn in Rm?
Some authors studied extrinsic representations of the Ricci flow initiated by rotational hypersurfaces in space forms, e.g., [2, 9], whose metrics are rotational symmetric – a special class of warped products. Meridian curves of a rotational hypersurface form a geodesic foliation. Such foliations arise naturally on twisted and warped products B×ρMˉ, on weak β-Kenmotsu manifolds and weak contact metric manifolds M(f,ξ,η,g), see [7, 5, 8], obtained by replacing the complex structure of the distribution ker η with a non-singular skew-symmetric tensor. The main achievement of the PRF for geodesic foliations is the dynamical characterizations of K-contact manifolds and warped products of constant mixed curvature, Kmix
– PRF evolves a weak K-contact structure (with Kmix>0), exponentially fast towards a K-contact structure (with Kmix≡1)
– PRF evolves warped products toward warped products with Kmix=const. This has practical implications because a simply connected weak Kenmotsu β-manifold with a complete Reeb field ξ such that ∇β is collinear with ξ is a warped product.
These advances raise the following problem: to study extrinsic representations of the PRF on geodesic foliations initialized by rotational hypersurfaces in Euclidean space, or hypersurfaces from other distinguished classes.
The paper focuses on extrinsic representations of PRF on geodesic foliations, when gt correspond to a warped product, β-Kenmotsu or K-contact structures, and St are rotational hypersurfaces or ellipsoids, respectively. We distinguish 3 assertions: existence of the PRF, realization by a certain isometric immersion, and smooth extension of such immersion across a pole. The first doesn’t imply the other two.
In Section 2 we show the convergence of the PRF for some warped and twisted products, and give examples. In Section 3 we study the PRF initiated by rotational hypersurfaces in Euclidean space and by parallel curved surfaces. In Section 4 we recall the notion of weak almost contact metric manifolds and study extrinsic representations of the PRF on weak K-contact manifolds initiated by ellipsoids, and on weak β-Kenmotsu manifolds initiated by rotational hypersurfaces.
The PRF on Twisted and Warped Products
The notion of a warped and twisted product is popular in differential geometry as well as in general relativity (some spacetime models are warped products).
Let (Bs,gB) be a compact Riemannian manifold with boundary, and (M,g) be an n-dimensional Riemannian manifold. The twisted productB×ρM is the manifold M=B×M with the metric g=gB+ρ2g, where ρ∈C∞(M) is a positive function. When ρ depends on B only, the twisted product is a warped product. The special case of a warped product are rotational symmetric metrics, i.e., (M,g) is a unit n-sphere, such metrics appear on rotational hypersurfaces in space forms.
The leaves B×{v} of a twisted product are totally geodesic, and the fibers {u}×M are totally umbilical with the second fundamental form h=−∇F(logρ)g. For twisted products Bs×ρMn, we have Ricg⊥=(Smixg/n)g⊥, where Smixg=trRicg⊥, and the PRF becomes a D-conformal flow
∂tg=−2(Smixg−r)g⊥.
Since R(X,ξ,Y,ξ)=−ρ−1ξ(ξ(ρ))g(X,Y) for unit ξ∈TF, the mixed sectional curvature Kmix depends on a point of B only, and Ricg⊥=−(ΔFρ/ρ)g⊥. Here, ∇F and ΔF denote, respectively, the gradient and the laplacian on the leaves.
If twisted product metrics gt=gB+ρ2(t,u,v)g solve the PRF on B×M, then ∂t(ρ2)g=2(ΔFρ/ρ)ρ2g+2rρ2g. This yields the leaf-wise parabolic PDE
∂tρ=ΔFρ+rρ.
Let μ(t,u)=ρ(t,u)∣∂B be twice continuously differentiable in t, and
We first record the fact identifying the PRF with the profile heat equation, it is the hinge on which the extrinsic representation turns.
Theorem 2.1 (Rovenski-Zelenko). Let the warped product metrics gt=gB+ρ2(t,u)g on Bp×ρMn solve the PRF (1.1), and any of conditions i)–iii) are satisfied
i) r<0 and (2.1)1,2
ii) 0≤r<λ1, p<4, and (2.1)
iii) r=λ1, p<4, (2.1) and μ=0, ∫0∞ν(τ)dτ<∞.
Then gt exist for all t≥0, and converge, as t→∞, uniformly on Bp×Mn in C0-norm to the limit warped product metric g∞=gB+ρ∞2(u)g with Ricg∞⊥=rg. Moreover, in cases i) and ii), the PRF has a global single point attractor, while in case iii) the limit metric g∞ depends on initial and boundary conditions.
Proof. Let 0<λ1≤…≤λi≤… be eigenvalues of the Schrödinger operator −ΔF−r on the leaves B×{y} counting their multiplicities, limj→∞λj=∞, and {ei}1≤i<∞ corresponding L2-orthonormal basis of eigenfunctions with ei=0 on ∂B of the eigenvalue problem: −ΔFei=λiei. Then, λ1 has multiplicity 1 (hence, λ1<λ2) and e1>0 on the interior of B. The leaf-wise parabolic Cauchy’s problem
∂tρ=ΔFρ+rρ,ρ(0,⋅)=ρ0,ρ(t,⋅)∣∂B=μ(t,⋅)(3)
has a unique solution ρ:[0,∞)×B→R. One can prove convergence of ρ, as t→∞, to a stationary state – a solution ρ∞:B→R of the problem
−ΔFρ∞=rρ∞,ρ∞∣∂B=μ.(4)
The rest of proof is similar to the proof of [6 Theorem 5.98].
For p=1 and B=[0,1], the problems (3) and (4) have the following view
To describe stationary profiles for r∈R, we use the following pair of solutions of y′′+ry=0 normalized by y(0)=0, y′(0)=1 and y(0)=1, y′(0)=0, respectively,
The functions Snr, Cnr are jointly smooth in (u,r) and satisfy the following relations: Snr′=Cnr, Cnr′=−rSnr, Cnr2+rSnr2=1.
Corollary 2.2 (Stationary profiles). Let r<π2 and α1,α2∈R. The problem (6) has a unique solution ρ∞(u,r;α1,α2)=Snr(1)α2Snr(u)+α1Snr(1−u) linear in α1,α2. For r=π2 and α1,α2≥0 with α12+α22>0, (6) is solvable if and only if α2=−α1, in which case solutions are ρ∞(u,r;α1,α2)=Csin(πu) for C∈R.
Example 2.3. i) For M=[0,1]×S1 the twisted product (semi-geodesic) metrics are
g=du2+ρ2(u,v)dv2,ρ>0.(7)
For the metric (7), each u-curve (i.e., v=const) is a unit-speed geodesic, and the Gaussian curvature is K=−ρu,u′′/ρ (involves no v-derivatives of ρ).
ii) Let gt=du2+ρ2(t,u)gSn−1, ρ(t,⋅)>0 on (0,1), be rotationally symmetric metrics on [0,1]×Sn−1. Then gt solve the PRF (1.1) if and only if (5) holds.
Indeed, the leaves {ω=const} compose a geodesic foliation F with unit tangent N=∂u and leaf-wise Laplacian ΔF=∂u,u2, and D=TSn−1, this is the warped product [0,1]×ρSn−1. We obtain the formula RN(t)=−(ρu,u′′/ρ)gt, while gt=ρ2gSn−1 and ∂tgt=(ρ2)t′gSn−1=2ρρt′gSn−1. Thus, the PRF (1.1) reads 2ρρt′=2(ρu,u′′/ρ)ρ2+2rρ2, that reduces to (5).
Proposition 2.4. Consider metric g0=du2+ρ02(u,v)dv2 on [0,1]×S1 with smooth ρ0>0 on (0,1)×S1, with boundary values α1(v):=ρ0(0,v)≥0 and α2(v):=ρ0(1,v)≥0 fixed in time. Then the following holds
i) the PRF with the boundary conditions ρ(t,0,v)=α1(v) and ρ(t,1,v)=α2(v) has a unique solution gt=du2+ρ2(t,u,v)dv2 for all t≥0, it is given for r<λ1 by
where An(v)=2∫01(ρ0(u,v)−ρ∞(u,r,α1(v),α2(v)))sin(nπu)du. The function ρ>0 on (0,1)×S1×[0,∞), so gt is a Riemannian metric on the interior for all t, degenerating at a boundary circle when the boundary value vanishes.
ii) if r<λ1 then, ∥ρ(t,⋅,v)−ρ∞(⋅,r,α1(v),α2(v))∥Ck([0,1])≤Ckexp((r−λ1)t) (t≥1), uniformly in v for every k≥0, consequently, gt→g∞ in every Ck norm, where g∞=du2+ρ∞2(u,r,α1(v),α2(v))dv2 has constant Gaussian curvature K≡r.
iii) if r=λ1, a limit exists only if α1≡α2≡0, in that case
in any Ck norm, and the limit metric has constant curvature r on the interior.
iv) if r>λ1, then limt→∞gt exists if and only if for any v and n with λn≤r, the coefficient An(v) of the solution vanishes (with ρ∞ replaced by any particular stationary solution when one exists), for generic data no limit exists.
Proof. Fourier series are used here in the standard way.
The PRF on Rotational and Parallel Curved Surfaces
In this section, we construct an extrinsic representation of the PRF (1.1) initialized by rotational hypersurfaces and parallel curved surfaces of Euclidean space.
Rotational Hypersurfaces
Rotational hypersurfaces with a one-dimensional axis in Rn+1 are foliated into (n−1)-spheres (parallels) and equipped with rotationally symmetric metrics g=du2+ρ2(u)dsn−12 — a special case of a warped product. Such a hypersurface (and its profile) can be given as a graph ρ=F(xn+1), where F∈C2, ρ=x12+⋯+xn2 and (xi) are Cartesian coordinates in Rn+1. We assume F′′≡0 to exclude the cases when the profile curve is a straight, and M is a cone, a cylinder, or a hyperplane.
A rotational hypersurface in Euclidean space Rn+1 with a multi-dimensional axis is a hypersurface obtained by rotating a lower-dimensional profile around a linear subspace (the “axis”) of dimension >1 (not a line). So, instead of the rotational hypersurface with axis = line, we get a foliated hypersurface invariant under the group O(n+1−s) acting on the orthogonal complement of the s-dimensional axis: for each y∈Rs, the fiber in x is a round (n−s)-sphere of radius ρ=F(y) in Rn+1−s.
Proposition 3.1. Let Sn⊂Rn+1 be a rotational hypersurface with a profile curve (ρ,h) parameterized by arclength, where ρ,h:[0,1]→R are smooth and ρ>0 on (0,1). If Sn has Kmax=r=const>0, then r≤π2, and for r=π2, we have ρ(0)=ρ(1)=0, and for any C∈(0,1/π], the functions (ρ,h) are given by
ρ(u)=Csin(πu),h(u)=∫0u1−(πC)2cos2(πs)ds.(8)
:::`
Proof. This is standard.
Example 3.2 (see Example 5.101 in [6]). Consider rotational surfaces St⊂R3
r=(ρ(t,u)cosv,ρ(t,u)sinv,h(t,u)),0≤u≤1,∣v∣≤π,ρ≥0
with (ρu′)2+(hu′)2=1. Profile curves v=const of St are unit speed geodesics. The v-curves of St are circles (in R3) of geodesic curvature k=−(logρ)u′. The metric gt=du2+ρ2(t,u)dv2 is rotational symmetric, and its Gaussian curvature is K=−ρu,u′′/ρ. Let gt solve the PRF, then ρ(t,u) solves the problem (5).
Assume that μ0,μ1∈C1[0,∞), then there exist limits limt→∞μj(t)=μj∈[0,∞).
The solution of stationary problem (6) with B=[0,1] and λj=(πj)2 is
For the resonance case, r=λ1=π2, the stationary problem is solvable if and only if μ0=μ1=0, and the solution is ρ∞(u)=Csin(πu), where C=const>0.
If r>π2, then gt diverge as t→∞, and if r≤π2, then gt converge to the limit metric g∞=du2+ρ∞2(u)dv2 with K(g∞)=r, see Theorem 2.1.
With known solution ρ(t,u) (t≥0) of (5) and ∣ρu′∣≤1, we get h=h(t,0)+∫0u1−(ρu′)2du, that correspond to rotational surfaces in R3 of positive constant Gaussian curvature. Assume for simplicity that μj(t)≡μj. Then
For r=π2, we get ρ∞=Csin(πu), where C=v10=∫01v0(s)ds, and then
h∞=π1EllipticE(cos(πu),Cπ).
Here,
EllipticE(z,k)=∫0z1−s21−k2s2ds
is the incomplete elliptic integral. To provide a numerical example for r=π2, let u∈[0,π], C=1 and μj=0. Then, the limit profile curve is a semi-circle [sinu,cosu] for 0≤u≤π, and the limit rotational surface in R3 is a round sphere.
Next, we prove the extrinsic realization theorem: the rotational hypersurfaces built from the normalized solution realize the PRF extrinsically for all t≥0, and converge, as t→∞, to the rotational hypersurface of Kmix=r when r≤λ1.
The key analytic fact is that the total slope δ:=sup(t,u)∈[0,1]×[0,∞)∣ρu′(t,u)∣ is finite whenever r≤λ1, and one can find an explicit bound of δ.
Definition 3.3. Let r≤λ1, and ρ0:[0,1]→R be smooth and positive on (0,1) with ρ0(0)=μ0≥0, ρ0(1)=μ1≥0 (and μ0=μ1=0 if r=λ1), and δ<∞ be the total slope of the solution ρ of (6). We assume δ>0: the degenerate case δ=0 occurs exactly when ρ≡μ0=μ1>0 is constant, and
then we get a trivial representation: every Mt below is a fixed round cylinder. The normalized PRF solution is ρ^:=ρ/δ, which by linearity of (2.5) is the solution with data ρ0/δ, μ0/δ, μ1/δ, and satisfies
(t,u)sup∣ρ^u′(t,u)∣=1.(10)
We represent the PRF by rotational hypersurfaces in Rn+1. Given the normalized PRF solution ρ^(t,u), define the map ψt:[0,1]×Sn−1→Rn+1 for t≥0
where ω∈Sn−1(1), the square root in the formula for h(t,u) is real due to (3.3), and the choice h(t,0)=0, hu′≥0 pins down the vertical translation and reflection (an extrinsic representation is defined up to rigid motions of Rn+1).
Lemma 3.4. For each t≥0 the map (3.4) parameterizes an embedded rotational hypersurface St⊂Rn+1 (immersed open cylinder (0,1)×Sn−1, closing up at a pole u∈{0,1}, where a boundary radius ρ^ vanishes, the closing is smooth when ∣ρ^u′∣=1 there, and is conical otherwise), with the following properties
i) The induced metric is gt=du2+ρ^2(t,u)gSn−1 and satisfies the PRF (1.1)
ii) For each ω∈Sn−1, ψt(u,ω) in (3.4) is a unit-speed geodesic of St of length 1. Moreover, ψt is a C1-regular immersion for every t, smooth away from the closed set ∣ρ^u′∣=1, the metric gt is smooth in (t,u) for t>0 and continuous at t=0.
Proof. This is standard.
Let St (t≥0) be rotational hypersurfaces with a common axis and profile curves γt parameterized by arclength on the interval [0,1]. Then St converge to the limiting hypersurface with a profile curve γ∞, if and only if γt→γ∞ uniformly on [0,1].
Theorem 3.5 (Extrinsic realization). Let r≤λ1, with μ0=μ1=0 if r=λ1, ρ0 be smooth and positive on (0,1) with ρ0(0)=μ0≥0, ρ0(1)=μ1≥0, δ∈(0,∞) be the total slope. Suppose that St⊂Rn+1 are rotational hypersurfaces (3.4) built from the normalized solution ρ^=ρ/δ. Then {St}t≥0 realize the PRF (1.1) extrinsically: the metric induced on St is gt=du2+ρ^2(t,u)gSn−1, and
i) if r<λ1, the limiting, as t→∞, hypersurface has Kmix≡r and its profile is
ii) if r=λ1 (so μ0=μ1=0), the limiting, as t→∞, hypersurface exists and is given by (3.1) with B=A1/δ∈(0,1/π], where A1=2∫01ρ0(u)sin(πu)du>0
iii) if r>λ1, then for generic data, δ=∞, the normalization is impossible, and no limiting hypersurface exists. Indeed, the intrinsic limit fails by Proposition 2.4iv) unless all coefficients A~i with λi≤r vanish.
Proof. The induced metrics are gt=du2+ρ^2gSn−1, they solve the PRF (1.1), and the meridians are geodesics of length 1 for every t, see Lemma 3.4i),ii) and Example 2.3ii). Note that ρ^ is the solution of (2.5) with data (ρ0/δ,μ0/δ,μ1/δ) by linearity, unique and smooth for t>0 by [6 Section 5.4.4] and (3.3) makes (3.4) well defined for all t. Thus, ψt are the required immersions, smooth for $t>0.
i) By Proposition 2.4 ii) with the normalized data, ρ^(t,⋅)→ρ∞(⋅,r,μ0/δ,μ1/δ) in C1([0,1]), as t→∞, using ρ∞(⋅,μ0/δ,μ1/δ)=δ1ρ∞(⋅,μ0,μ1). Passing to the limit in ∣ρ^u′∣≤1 gives the derivative of ρ∞, see (13) and also Corollary 2.2. Then
uniformly in u, since ρ^u′→ρ∞′ uniformly with values in [−1,1]. Hence, the profile curves (ρ^,h)(t,⋅) converge uniformly to (3.5), which is the limiting hypersurface. A limiting metric is g∞=du2+ρ∞2(u)gSn−1, and any plane containing ∂u has sectional curvature Kmix=−ρ∞′′/ρ∞=r by (2.5), for n=2 this is the Gaussian curvature.
ii) Proposition 2.4 iii) with μ0=μ1=0 and r=λ1 gives ρ^(t,⋅)→(A1/δ)sin(πu) in C1, and A1>0 since ρ0>0 on (0,1) makes the integrand of A1 positive there. Similar argument as in (1) yields uniform convergence of the generating curves to the curve (3.1) with B=A1/δ>0, and passing to the limit in ∣ρ^u′∣≤1 gives Bπ≤1, i.e., B≤1/π, so the limit lies in the extremal family of Proposition 3.1, for B=1/π the limiting hypersurface closes smoothly at both poles (∣ρ^u′∣=1 there), and for B<1/π it closes with two conical points. By the above, δ≤1, so (3.4) applies to ρ (in place of ρ^), and the proof is similar as for δ=1: we have
for the limiting profile curve, (3.5) with (μ0,μ1), and the slope condition.
Parallel Curved Surfaces
A parallel curved (PC) surface is a surface M2⊂R3 and a fixed plane E such that at each point of M2 at least one principal direction is parallel to E, see [1]. PC surfaces carry twisted product metrics, see (2.6), with (positive by the focal condition)
Let γ:I→R2⊂R3 be a simple closed convex curve, parameterized by arclength, with curvature k=kγ(v)>0 and inward unit normal N(v), rfoc:=minv1/k(v)>0 its focal radius, and e3 the vertical unit vector in R3. Let ρ,h:[0,1]→R be smooth arclength parameterization and ∣ρ(u)∣<rfoc for all u. Then r=γ(v)+ρ(u)N(v)+h(u)e3 parameterizes a PC surface, called a canonical PC surface, and
i) the induced metric ds2=du2+(1−ρ(u)k(v))2dv2 belongs to twisted products
ii) u-curves are unit-speed geodesics of length 1
iii) the Gaussian curvature is K=ρu,u′′k/(1−ρk)
iv) with unit normal ν=−hu′N+ρu′e3, the second fundamental form is diagonal with e=hu,u′′/ρu′−hu′′ρu,u′/ρu′, g=−hu′(u)k(v)(1−ρ(u)k(v)), so the coordinate directions are principal, r,v′ being parallel to the xy-plane.
Proposition 3.6 (The PRF on PC surfaces). Let g0 be induced metric of a canonical PC surface, with ρ0 as in (3.7) and fixed boundary values μ0(v)=ρ0(0,v) and μ1(v)=ρ0(1,v). Then the PRF has a unique global solution, the foliation by u-curves remains geodesic with leaves of length 1, and for r<λ1 the metrics converge in every Ck-norm to metric g∞=du2+ρ∞2(u,r,μ0(v),μ1(v))2dv2 of constant Gaussian curvature r, the cases r≥λ1 are as in Proposition 2.4.
Proof. This is standard.
Theorem 3.7 (Realization of PRF by PC surfaces).Consider canonical PC surfaces over the fixed base γ with evolving profile
(Rigidity). If the induced metrics of a family (3.8) withρt′≡0satisfy the PRF, then eitherk=const, i.e.,γis a circle and the surfaces are rotational, orr=0.
(Existence for r=0). Letρ(t,u)solve the heat equationρt′=ρu,u′′with dataρ(⋅,0)=ϕ, ρ(t,0)=α1, ρ(t,1)=α2, whereϕis smooth,∣α1∣,∣α2∣,sup∣ϕ∣<rfoc, andsupt,u∣ρu′∣≤1(achievable by the normalization of Definition 3.3, which scalesα2toward 0 and so preserves the focal condition). Then
2a) the focal condition is preserved: by the maximum principle, for alltwe have
usup∣ρ(t,u)∣≤max(sup∣ϕ∣,∣α1∣,∣α2∣)<rfoc
2b) a family (3.8) consists of canonical PC surfaces realizing the PRF withr=0.
2c) the limit is a flat canonical PC surface with profileρ∞(u)=α1+(α2−α1)u.
Proof. 1) The induced metric of (3.8) is du2+b2dv2 with b=1−ρ(t,u)k(v). The PRF is equivalent to ρt′=ρu,u′′+rb, thus, (using k(v)>0)
ρt′−ρu,u′′−rb=−r/k(v).(16)
The LHS is independent of v, hence so is the RHS, which forces r=0 or k=const.
For r=0, (3.9) reduces to ρt′=ρu,u′′, so the induced metrics satisfy the PRF equation with r=0, this proves the realization claim in 2b) once the surfaces are shown to be well defined. 2a) is the maximum principle for the heat equation: both max and min of ρ over [0,1]×[0,T] are attained on the parabolic boundary, where ∣ρ∣≤max(sup∣ϕ∣,∣α1∣,∣α2∣)<rfoc, note that for r=0 there is no zeroth-order term and the principle applies directly. Together with sup∣ρu′∣≤1, the map (3.8) is well defined, and 1−bk≥1−sup∣b∣maxk>0, so it is an immersion with the stated first fundamental form. For 2c), Theorem 2.1 with r=0<λ1 gives ρ(t,⋅)→ρ∞(⋅,0,α1,α2) in C1, and the height functions converge uniformly, the limit profile is linear, so the limiting surface has K=k(ρ∞)u,u′′/(1−kρ∞)≡0.
The PRF on Weak Almost Contact Metric Manifolds
Contact Riemannian geometry is a significant field in both mathematics and physics. In 2022, Rovenski and Wolak introduced metric structures on a smooth manifold that generalize the almost contact, K-contact, Sasakian, cosymplectic, etc. metric structures. Such so-called “weak” structures allow us to take a fresh look at the theory of classical structures and find new applications, see [7, 8, 5].
A Riemannian manifold (M2n,g) equipped with a non-degenerate skew-symmetric (1,1)-tensor f is called a weak Hermitian manifold. This manifold is called weak Kählerian if ∇f=0, where ∇ is the Levi-Civita connection.
A weak almost contact metric structure on a manifold M2n+1 is a set (f,Q,ξ,η,g), where g is a Riemannian metric on M, f is a skew-symmetric (1,1)-tensor of rank 2n, ξ is a unit (Reeb) vector field, η is a 1-form such that η(ξ)=1, satisfying
g(fX,fY)=g(X,QY)−η(X)η(Y)
and Q:=−f2+η⊗ξ is a self-adjoint (1,1)-tensor field (for almost contact metric manifolds, Q=I is true). The self-adjoint (1,1)-tensor Q:=Q−I measures the difference between weak and classical metric structures. A weak contact metric structure is a weak almost contact metric structure satisfying the condition dη=F, where F(X,Y)=g(X,fY), in this case, the Reeb vector field ξ is geodesic.
Weak K-Contact Manifolds
A weak contact metric structure is called a weak K-contact structure if ξ is Killing (an infinitesimal isometry), i.e., the Lie derivative of metric vanishes: Lξg=0. We generalize the fact that a Riemannian manifold with a unit Killing vector field ξ such that RξX=X for X∈kerη is a K-contact manifold.
Theorem 4.1 ([8]). A Riemannian manifold (M2n+1,g) admitting a unit Killing vector field ξ such that the (1,1)-tensor ∇ξ has constant rank 2n and ξ-sectional curvature is positive is a weak K-contact manifold M(f,Q,ξ,η,g) with η=g(⋅,ξ) and the following structural tensors: f=−∇ξ and QX=RξX for X∈kerη.
The PRF prescribes Kmix of a foliation and has recently been used to obtain dynamical characterizations of K-contact structures, see [8]. For K-contact structures, Ricg⊥=1 and the metric is a fixed point of the normalized PRF with r=1.
Theorem 4.2 ([8]). Let M2n+1(f0,Q0,ξ,η,g0) be a weak K-contact manifold. Then, there exist D-adapted weak K-contact structures (ft,Qt,ξ,η,gt) on M such that gt – a solution of the PRF – converges exponentially fast, as t→−∞, to a limit metric that provides a K-contact structure.
Example 4.3. Let M2n+1(f0,Q0,ξ,η,g0) be a weak K-contact manifold with Q∣D=λID for some differentiable function 0<λ≡1 on M. From Theorem 4.2, applying the theorem of uniqueness of a solution to ODE
∂tRξ=4Rξ(Rξ−ID)(17)
we have a D-conformal solution Rξ(t)=μ(t)ID. Since ∂tID=0, we have also that ODE dμ/dt=4μ(μ−1) with μ(0)=λ>0. Thus,
μ(t)=1−Cexp(4t)1
(t∈R), where C=1−λ−1=0. Since our PRF reduces to ODE, by the uniqueness of a solution, we have ∂tgt⊥=0 and gt=g0⊥+ρ(t)g0⊤, where ρ(0)=1 and
Therefore, ft=f0/ρ(t) and Qt∣D=1−Cexp(4t)1ID. Note that limt→−∞Qt=ID. By Theorem 4.2, (ft,Qt,ξ,η,gt)(t∈R) is a smooth family of weak K-contact structures on M – a solution of the PRF – that converges exponentially fast, as t→−∞, to a K-contact structure (f0/λ,ξ,η,g0⊥+λg0⊤).
We obtain an extrinsic realization of the PRF on an ellipsoid of R4 with the weak K-contact structure, its limit is a unit three-sphere with the K-contact structure.
Example 4.4. Let M⊂R2n+2 with n≥1 be an ellipsoid with induced metric g
is a Killing vector field on R2n+2. (Indeed, there is a constant block-diagonal with 2×2 skew-symmetric blocks matrix J such that ξ(u)=Ju. The integral curves of ξ(u) solve (d/dt)u=Ju, hence, u(t)=exp(tJ)u(0), where exp(tJ) is an orthogonal matrix. Thus, the flow Ψt(u)=exp(tJ)u consists of rotations, so each Ψt is an isometry). Note that ξ is tangent to M, and ξ is a unit Killing vector field on (M,g), which defines a weak K-contact structure, see Theorem 4.1.
The following result (for n=1) can easily be extended for n>1.
Theorem 4.5. Let (f,Q,ξ,η,g) be a weak K-contact structure on an ellipsoid S3={u12+u22+a0(u32+u42)=1}⊂R4 with a unit Killing vector field ξ=(−u2,u1,−a0u4,a0u3) and Q∣kerη=λIkerη for a smooth function λ>0 on S3. Then we get an extrinsic realization of the PRF on ellipsoids St3={u12+u22+at(u32+u42)=1}⊂R4 with at=1−(1−a0)exp(4t) and t≥0, and the limit, as t→−∞, is a unit sphere S3⊂R4 equipped with a K-contact structure (f^,ξ^,η^,g^) and ξ^=(−u2,u1,−u4,u3).
Proof. Using Hopf parametrization u1=cosθcosϕ, u2=cosθsinϕ, u3=a0−1/2sinθcosψ, u4=a0−1/2sinθsinψ) of this ellipsoid, we find its metric tensor
ds2=(sin2θ+a0−1cos2θ)dθ2+cos2θdϕ2+a0−1sin2θdψ2.
For any tangent vector X such that g(X,ξ)=0, the Gauss equation, and (4.1), give RξX=g(Aξ,ξ)AX−g(AX,ξ)Aξ, where A is the Weingarten operator. In fact, for this ellipsoid of revolution, X and ξ are principal directions. By the above, RξX=∥u∥−2X=(1+(1−a0)(u32+u42))−1X, where the factor varies with both a0 and the point (ui) on the ellipsoid. Using QX=RξX (Theorem 4.1) where X∈kerη and Example 4.3, we get 1+(1−at)(u32+u42)=1−(1−λ−1)exp(4t). For at=1−(1−a0)exp(4t) and t∈R, we obtain λ=(u32+u42+1)−1 and QX=(1+exp(4t)(u32+u42))−1X (X∈kerη). We get an extrinsic realization of the PRF on the weak K-contact ellipsoid. By Theorem 4.2, the limit, as t→−∞, is a unit sphere S3 with a K-contact structure.
Weak β-Kenmotsu Manifolds
In 1972, Kenmotsu introduced and studied a special class of almost contact metric manifolds, which is characterized in terms of warped products of the real line and a Kähler manifold with the warping function ρ=Cexp(u). In 1991, Olszak characterized in terms of warped products (with ρ=Cexp(βu)) a class of almost contact metric manifolds, known as β-Kenmotsu manifolds for β=const>0, given by
(∇Xf)Y=β(g(fX,Y)ξ−η(Y)fX).(18)
Weak β-Kenmotsu manifolds were introduced, see [5], as weak almost contact metric manifolds satisfying (4.2), where β=0 is a smooth function on M, and if n=1, then dβ∧η=0 is required. If β≡1, then M2n+1(f,Q,ξ,η,g) is called a weak Kenmotsu manifold, and for Q=I we get a Kenmotsu manifold. By (4.2), ∇Xξ=β(X−η(X)ξ) thus, for weak β-Kenmotsu manifolds, ξ is geodesic (∇ξξ=0).
Theorem 4.6 (see [5]). *Every point of a weak β-Kenmotsu manifold M(f,Q,ξ,η,g) has a neighbourhood U that is isometric to a twisted product (−ε,ε)×ρMˉ (a warped product if ∇β is parallel to
ξ with the leaves tangent to ξ, where M has a weak Hermitian (weak Kähler, respectively) structure and the following is true
ρρu′=β.(19)
For a simply connected M and geodesically complete ξ, the isometry is global.
Consider a (weak) β-Kenmotsu structure on a warped product [0,1]×ρS2(1) with the (weak) Kähler structure on S2(1), and realize it on a rotational hypersurface in R4 with profile curve (ρ(u),h(u))(u∈[0,1]), where (ρu′)2+(hu′)2=1. By Theorem 4.6, ∇β is parallel to the Reeb field ξ, i.e., β is a function of u. By (19), we have
For β≡1, the profile curve is (ρ(u),h(u))=(ρ0exp(u),∫0u1−ρ02exp(2s)ds).
Let the family of warped products Mt3=[0,1]×ρ(t,u)S2, t≥0, with ρ(0,u) given in i), see Theorem 2.1, carries a (weak) β-Kenmotsu structure with ξ=∂u and β depending on (t,u), and g(t) modified by the PRF (1). Let us realize Mt3 as hypersurfaces of revolution St3 in R4 with profile curves (ρ(t,u),h(t,u)), where the height function h(t,u) is determined (up to an additive constant in u) by the arc-length condition, i.e., hu′(t,u)=1−(ρu′)2(t,u). The rotational hypersurface closes smoothly at both ends u=0 and u=1 (i.e., is diffeomorphic to S3) if and only if
By (19), β=ρu′/ρ is a function of (t,u) that defines a β-Kenmotsu structure on Mt3.
The PRF modifies g(t), as t→∞, to a limit metric g∞=du2+ρ∞2(u)gS2 with Kmix≡r. The function ρ∞(u) satisfies the ODE and is given by (9). The profile curve of the limiting rotational hypersurface S∞3 in R4 is given by (ρ∞(u),h∞(u)), where h∞(u)=∫0u1−(ρ∞′)2(s)ds. The limiting (weak) β-Kenmotsu structure has β∞=(ρ∞)u/ρ∞. For r=π2, we get ρ∞=Csin(πu), see Example 3.2, then using (19) we find β∞(u)=πcot(πu).
Conclusion
We studied extrinsic representations of the partial Ricci flow (PRF) on manifolds with geodesic foliations. The constructions encompass compact rotational hypersurfaces in Euclidean space, including weak β-Kenmotsu examples, parallel curved surfaces, and ellipsoidal models carrying weak K-contact structures.
The study of extrinsic representations of the PRF presented in this paper can be extended for totally geodesic foliations, e.g., twisted products and weak metric f-contact manifolds (as well as to spherical foliations such as in [3]) with applications to the calculus of moving surfaces and mathematical physics.
Acknowledgments
The authors thank Professor D. Blanc for helpful comments on the paper.
[2]Coll V., Dodd J. and Johnson D., Ricci Flow on Surfaces of Revolution: An Extrinsic View. Geom. Dedicata 207 (2020) 81–94.DOI
[3]Güler E. and Toda M., A Study of Special Weingarten Hypersurfaces in R^4 with Spherical Foliations, J. Geom. Symmetry Phys. 75 (2026) 39–49.DOI
[4]Rovenski V., The Partial Ricci Flow for Foliations, In: Rovenski, V. et al. (Eds) Geometry and its Applications, Springer Proc. Math. & Statistics 72, Springer, Cham 2014, pp 125–155.DOI
[5]Rovenski V. and Patra D., Weak β-Kenmotsu Manifolds and η-Ricci Solitons. In: Rovenski, V. et al. (Eds) Differential Geometric Structures and Appl., Springer Proc. Math. and Statistics 440, Springer, Cham 2024, pp 53–72.
[6]Rovenski V. and Walczak P., Extrinsic Geometry of Foliations, Progress in Mathematics 339, Birkhäuser, Cham 2021.DOI
[7]Rovenski V. and Wolak R., New Metric Structures on g-Foliations, Indag. Math. 33 (2022) 518–532.DOI
[8]Rovenski V., Generalized Ricci Solitons and Einstein Metrics on Weak K-Contact Manifolds. CAM, 15 (2023) 177–188.arxiv.org/abs/2301.03500
[9]Suda N., Ricci Flow of Discrete Surfaces of Revolution, and Relation to Constant Gaussian Curvature, Diff. Geometry and its Appl. 98 (2025) 102221.arxiv.org/abs/2312.08113