We show that Dal Maso's GBD space, introduced for tackling crack growth in linearized elasticity, can be defined by simple conditions in a finite number of directions of slicing.
Introduction
In [21] G. Dal Maso introduced the space of Generalized (Special) functions of Bounded Deformation (G(S)BD) to characterize the domain of a class of functionals associated to free discontinuity problems [22, 7] in linearized elasticity or elastoplasticity, in particular for the modeling of crack growth [25]. In these contexts the energy functionals depend on a variable u:Ω⊂Rd→Rd, representing the displacement, through its symmetrized gradient e(u)=(Du+DuT)/2 (the deformation) and its (d−1)-dimensional jump set Ju (the crack set), with a constraint imposing - in a weak sense - Dirichlet boundary conditions. Yet an integrability bound on u in terms of a bound for such functionals is in general not available, so that it is not possible to control the deformation in the space of Radon measures.
An analogous issue arises both in the simplified antiplane shear setting, where the displacement is only in the vertical direction so it can be assumed scalar, and in the framework of finite elasticity or elastoplasticity, contexts in which the role of e(u) is played by the full gradient ∇u. This motivated the introduction of the space G(S)BV[4, 5] as the space of functions which are in (S)BV after composition ψ∘u with C1 functions ψ having ∇ψ compactly supported.
However, e(ψ∘u) depends on the whole gradient of u, even for u smooth, which prevents from adopting a similar definition of G(S)BD. The solution found in [21] was to define this space by slicing: a measurable function u:Ω→Rd is in GBD(Ω) if there exists a bounded Radon measure Λu such that for every ξ∈Sd−1 and for Hd−1-a.e. z∈ξ⊥ the slice s↦uzξ(s):=ξ⋅u(z+sξ) has bounded variation in Ωzξ:={s∈R:z+sξ∈Ω} and
for every B⊂Ω Borel, with Bzξ:={s∈R:z+sξ∈B}. Still in [21], it is shown that it is enough to have the bound for all ξ in a dense subset of Sd−1. However, it is well known that a much simpler characterization exists for the space BD of functions of Bounded Deformation: a measurable u is in BD(Ω) as soon as there is a basis (ei)i=1d of Rd such as the following holds: for any ξ∈V:={ei:i=1,…,d}∪{ei+ej:1≤i<j≤d} and for Hd−1-a.e. z∈ξ⊥, uzξ∈BV(Ωzξ) and
cf. [6 Section 3] and [32 Chap. II, Section 2.2] (see also [33, 32, 8, 23, 24] for general properties of BD functions). It is therefore natural to ask whether GBD functions can, similarly, be described by conditions in a finite number of appropriate directions. Our main result answers this affirmatively.
We show that a measurable u is in GBD(Ω) as soon as there exists a basis (ei)i=1d of Rd and d(d−1)/2 vectors ξi,j∈span{ei±ej}, $1 \le i < j \le d$ such that for any ξ∈V={ei:i=1,…,d}∪{ξi,j:1≤i<j≤d} and for Hd−1-a.e. z∈ξ⊥, uzξ∈BV(Ωzξ) and
Λuξ:=(μuξ)(Ω)<+∞.
In other words, we show that if we have a control on the d(d+1)/2 directions ξ∈V through Λuξ, then the same control holds in fact for all ξ∈Sd−1, and can be localized on Borel subsets B⊂Ω and controlled by a global finite measure Λu.
Our strategy is to approximate any measurable u with Λuξ bounded for all ξ∈V, by a family of functions, each in a suitable finite dimensional space, satisfying a uniform bound in GBD, according to the definition in [21] (Theorem 1). More precisely, for any ε>0, we choose a family of discretizations of the domain into hypercubes of sidelength ε>0 so that u is approximated in measure by the functions defined in any hypercube as the d-linear interpolation over the vertices (see Appendix § 4). Then we modify such functions, setting them to 0 on the “bad hypercubes”, which are such that there are ξ∈V and a couple of vertices joined by a segment parallel to ξ that intersect the set where the jump of u is larger than 1. Thanks to an averaging argument, we show that we can choose the discretizations in such a way that (i) the bound on Λu gives a uniform control on the perimeter of the union of the “bad hypercubes” while (ii) outside this set, the symmetric gradient of the d-linear approximation is controlled in L1 by the finite differences along directions in V, thus again by the bound on Λu (see Appendix § 3).
From this approximation we derive (Corollary 1) that u∈GBD by employing a suitable compactness result for bounded sequences in GBD that converge in measure [21, 27]. This strategy of discretization/reinterpolation for (G)BD functions was first used in [11, 12, 31] to show approximation results in (G)SBD.
As a further application (Corollary 2), we prove that any sequence of measurable functions satisfying uniformly the control on (Λukξ)ξ∈Vk is precompact in GBD, in the sense of the general compactness and closedness result in [19] (we refer also to [3] for a related compactness result in GBD).
Eventually, we address an open question raised in the recent work [1] (see also [2]) concerning a nonlocal approximation of Griffith-type energies for brittle cracks (see e.g. [25, 13, 26, 30, 15, 20, 14, 16, 10, 29, 9, 28]). In some approximation regimes the limiting admissible deformation u naturally belong to the space therein called GBVε(Ω;Rd), namely it satisfies the bound
∫Sd−1μuξ(B)dHd−1(ξ)≤Λu(B)for B⊂Ω Borel,
for a suitable bounded Radon measure Λu. We prove that GBVε coincide with GBD (Corollary 3), in particular we give positive answer to a question in [1] concerning the rectifiability of the measure obtained by integrating over directions ξ the jump parts of the measures (μuξ)ξ.
In the same spirit, we prove (Proposition 2) a characterization of the space GSBDp (i.e. the GBD functions with slices in SBV, symmetrized gradient in Lp and jump set of finite Hd−1-measure, see e.g. [26]), with a slight adaptation of the arguments in the proof of Theorem 1, and the corresponding compactness (Corollary 4), employing the general compactness result [18], see also [17].
Main results
Here Ω is a bounded1 open set of Rd, d≥2. Given u:Ω→Rd, for any ξ∈Rd∖{0} and z∈ξ⊥, we define:
uzξ(s):=ξ⋅u(z+sξ)for s∈Ωzξ:={s∈R:z+sξ∈Ω}.
We denote by L0(Ω;Rm), m≥1, the measurable functions from Ω into Rm and by vk→v in L0(Ω;Rm) we mean that vk converge to v in Ld-measure in Ω, for Ld the Lebesgue measure on Rd. We also let Q:=[0,1)d and, for any ε>0,
Ωε:={x∈Ω:dist(x,∂∗Ω)>dε}.
We refer to [7] for general theory of BV functions. If u∈BV we denote by Dau and Dcu the absolutely continuous and the Cantor part of the bounded Radon measure Du. Moreover, we refer to [6] for a careful treatment of the SBD space and to [21] for the definition and the main properties of GBD functions.
Theorem 1. Let u∈L0(Ω;Rd) and assume there is an orthonormal basis (ei)i=1d of Rd such that for any ε>0 it holds that ξ∈V:={ei:i=1,…,d}∪{ei+ej:1≤i<j≤d}, and that for Hd−1-a.e. z∈ξ⊥, uzξ∈BV(Ωzξ) and
Then there exist a dimensional constant C>0 and a family (uε)ε>0⊂SBV∞(Ω;Rd) such that, for any ε>0, Juε⊂∂Bε with Bε union of finitely many cubes of sidelength ε included in Ω,
Remark 1. In Theorem 1, we assumed (ei)i=1d orthonormal for simplicity. The result would hold also for an arbitrary basis: this is easily checked by considering a matrix A which sends (ei)i=1d to an orthonormal basis and replacing u with A−Tu(A−1⋅). One could of course also consider the integrals in (1) over arbitrary spaces Eξ with Eξ⊕Rξ=Rd rather than just ξ⊥, see [21 Remark 4.11]. Additionally, as in [21 Remark 4.3], one could replace in (1) the threshold 1 (in [∣uzξ∣]∧1) by an arbitrary (ξ-dependent) threshold level βξ>0, since ∣x∣∧α≤(1∨α/β)(∣x∣∧β) for any α,β>0. Finally one could consider, for some pairs (i,j), slicing in the direction ei−ej rather than ei+ej.
From Theorem 1 we deduce the following three consequences. We refer to [1 Definition 2.3] for the definition of the space GBVE(Ω;Rd), characterized in Corollary 3.
Corollary 1. For any fixed basis (ei)i=1d of Rd and V:={ei:i=1,…,d}∪{ei+ej:1≤i<j≤d} it holds that
GBD(Ω)={u∈L0(Ω;Rd):ΛuV<+∞},(3)
where, for any u∈L0(Ω;Rd), ΛuV is defined in (1), (2).
Corollary 2. Let (uk)k⊂GBD(Ω) such that for every k∈N∖{0} there exists (ek)k, ek:=(eik)i=1d orthonormal basis of Rd with (recalling (1), (2))
k∈NsupΛukVk<+∞,
for Vk:={eik:i=1,…,d}∪{eik+ejk:1≤i<j≤d}. Then there exist a Caccioppoli partition P=(Pn)n of Ω, a sequence of piecewise rigid motions (ak)k with
ak=n∈N∑aknχPn,(4)
∣akn(x)−akn′(x)∣→+∞for a.e. x∈Ω,for all n=n′,(5)
and u∈GBD(Ω) such that, up to a (not relabelled) subsequence,
uk−ak→ua.e. in Ω,(6)
Hd−1(∂∗P∩Ω)≤σ→+∞limk→∞liminfHd−1(Jukσ).(7)
where Jukσ:={x∈Juk:∣[uk](x)∣≥σ}.
Corollary 3. It holds that
GBVE(Ω;Rd)=GBD(Ω).
We now provide analogous results for the space GSBDp of GBD functions with symmetrized gradient in Lp and jump set of finite Hd−1-measure, see e.g. [15].
Proposition 2. Let u∈L0(Ω;Rd), p>1, and assume there is an orthonormal basis (ei)i=1d of Rd such that for any ε>0 it holds that ξ∈V:={ei:i=1,…,d}∪{ei+ej:1≤i<j≤d}, and almost z∈ξ⊥, uzξ∈SBVp(Ωzξ) with Dauzξ=(uzξ)′L1 and
Then there exist a constant C>0 depending only on d, p, and a family (uε)ε>0⊂SBV∞(Ω;Rd) such that, for any ε>0, Juε⊂∂Bε with Bε union of finitely many cubes of sidelength ε included in Ω,
Corollary 4. With the notation of Proposition 2, let (uk)k⊂GSBDp(Ω), (ek)k, (Vk)k with ek:=(eik)i=1d orthonormal basis of Rd, Vk:={eik:i=1,…,d}∪{eik+ejk:1≤i<j≤d} be sequences such that
k∈NsupΛukp,Vk<+∞.
Then there exist a Caccioppoli partition P=(Pn)n of Ω, a sequence of piecewise rigid motions (ak)k with
ak=n∈N∑aknχPn,(10)
∣akn(x)−akn′(x)∣→+∞for a.e. x∈Ω,for all n=n′,(11)
and u∈GSBDp(Ω) such that, up to a (not relabelled) subsequence,
uk−ak→ua.e. in Ω,(12)
e(uk)⇀e(u)in Lp(Ω;Msymd×d),(13)
Hd−1(Ju∪∂∗P)≤k→∞liminfHd−1(Juk).(14)
From now on we prove the announced results, following the order of presentation.
Proof of Theorem 1. For ξ∈V and z∈ξ⊥ such that uzξ∈BV(Ωzξ), we denote by μzξ the measure (on Ωzξ):
Now, since (for Hd−1-a.e. z) uzξ∈BV(Ωzξ), then for a.e. s: either there is s′∈(s,s+ε)∩Juzξ with ∣[uzξ](s)∣≥1, and then clearly ∣uzξ(s+ε)−uzξ(s)∣∧1≤μzξ((s,s+ε)), or there isn’t, in which case, μzξ└(s,s+ε)=∣Duzξ∣└(s,s+ε), which implies that ∣uzξ(s+ε)−uzξ(s)∣≤μzξ((s,s+ε)). It follows that
Let us choose yε∈Qε∩Qε, where Qε⊂Q is the set given by Proposition 7 in Appendix B. For ε>0 small enough and for any i∈εZd we denote by
Qεi:=εyε+i+ε[0,1)d
the cube corresponding to i, by
Vξ(Qεi):={j∈εZd:εyε+j+[0,ε)ξ is an edge of Qεi}
the vertices of Qεi which are endpoints of edges parallel to ξ (more precisely, we consider for any such edge the lowest endpoint, with respect to the order in Zd, that is the one included in Qεi), and we define the function uε for every x∈Ω as
the multilinear interpolation of the values of u at the vertices of the cube Qεi which contains x, if Qεi⊂Ω and if for all ξ∈V and j∈Vξ(Qεi)
ξ⋅(u(εyεi+j+εξ)−u(εyεi+j))≤1;
0, else.
Observe that uε is a polynomial in the cubes of the first type, so in particular it does not jump therein, that it is continuous accross a facet between two such cubes, and that the number of cubes of the second type is bounded by (2/ε)d−12M so that, denoting by Bε the union of cubes of the second type, it holds that
Juε⊂∂Bε,Hd−1(∂Bε)≤CM,∣Bε∣≤CMε(16)
for a dimensional C>0. In particular, the convergence properties of the multilinear interpolations stated in Proposition 7 also hold for uε, since they differ, in Ω, on a set of vanishing measure. In addition, if Qεi is a cube of the first type, we have that
by Proposition 4 (in Appendix § 3) for p=1, and a change of variables. Therefore, summing the above two estimates over the cubes all included in Ω (which cover Ωε), we find that, for ε small enough, uε∈SBV∞(Ω) with
∫Ωε∣e(uε)∣dx+Hd−1(Juε∩Ωε)≤2CM,
for a dimensional constant C>0, and this gives (2) recalling that M=∑ξ∈V∣ξ∣Λuξ.
Proof of Corollary 1. Let (uε)ε>0 be the sequence provided by Theorem 1 and fix Ω′⋐Ω. By the slicing properties of BV functions and the bound (2) it follows that defining \Lambda^\varepsilon:=\int|e(u^\varepsilon)|\,dx+\mathcal{H}^{d-1}\mathbin{\vrule height 1.4ex depth -0.4ex width .07ex\vrule height .07ex depth -0.02ex width .7ex}\partial B^\varepsilon, then Λε(Ω′)≤CΛu and one has, for all ξ∈Sd−1 and all Borel B⊂Ω′,
so that (uε) are equibounded in GBD(Ω′), in the sense of [21]. Moreover, as uε→u in L0(Ω;Rd), by [19 Theorem 1.1] we conclude that u∈GBD(Ω′). In fact, the convergence of uε to u implies that the infinitesimal rigid motions can be taken as equal to 0 (alternatively, one could use [21 Corollary 11.2 and Theorem 11.3] together with the fact that since uε→u in L0(Ω;Rd), there is an increasing function ψ0:R+→R+ with lims→+∞ψ0(s)=+∞ such that ∥ψ0(uε)∥L1(Ω) is uniformly bounded w.r.t. ε>0, see e.g. [27 Lemma 2.1]). Then we conclude that u∈GBD(Ω) by the arbitrariness of Ω′⋐Ω.
Proof of Corollary 2. For any uk let (ukε)ε>0 be the approximating family provided by Theorem 1. Then for any k∈N∖{0} we can find εk>0 such that, for uk:=ukεk it holds that uk∈SBV∞(Ω;Rd) with uk∈∂∗Bεk and Bεk union of finitely many cubes of sidelength εk included in Ω, such that
Recalling (12), it follows that the sequence (u~k)k satisfies the assumptions of [19 Theorem 1.1] on any Ωεk for k≥k, and therefore by that compactness result and by a diagonal argument on Ωεk, up to a (not relabelled) subsequence, there are a Caccioppoli partition P=(Pn)n of Ω, a sequence of piecewise rigid motions (ak)k satisfying (4), and u∈GBD(Ω) such that
u~k−ak→ua.e. in Ω.(19)
By the first in (13) we deduce (5a). At this stage, (5b) follows arguing exactly as in [19 Section 3.3: Lower semicontinuity]. □
Proof of Corollary 3. We prove that GBVE(Ω;Rd)⊂GBD(Ω), the opposite inclusion being true by definition of GBD(Ω) in [21]. The proof follows by averaging. We fix an orthonormal basis (ei)i=1d, and let V={ei,i=1,…,d;2ei+ej,1≤i<j≤d}. Then, we have that:
(for μ the Haar measure over SO(d)), which is finite whenever u∈GBVE(Ω;Rd). We then pick any rotation for which ∑ξ∈RVΛuξ is less than average and consider the basis (Rei)i=1d in Theorem 1. We conclude since ΛuR(ei+ej)=2ΛuR(ei+ej)/2. □
Proof of Proposition 2. We argue as in the proof of Theorem 1, with the measures μzξ replaced by the measures
Therefore the proof proceeds as done for Theorem 1, first choosing suitably yε from the previous inequality and Proposition 7 in Appendix B, and then replacing ∣ξ⋅(u(εyε+i+εξ)−u(εyε+i))∣ by ∣ξ⋅(u(εyε+i+εξ)−u(εyε+i))∣p, to define the approximating functions uε converging in measure to u. We still control Bε, the union of cubes of the second type, as in (11); on any Qε=εyε+i+ε[0,1)d of the first type, we have that
by Proposition 4 for p>1 and a change of variables. Summing up we obtain the bound (7). □
Proof of Corollary 4. For any uk let (ukε)ε>0 be the approximating family provided by Proposition 2. Then for any k∈N∖{0} we can find εk>0 such that, for u~k:=ukεk it holds that uk∈SBV∞(Ω;Rd) with Juk⊂∂∗Bεk and Bεk union of finitely many cubes of sidelength εk included in Ω, such that
Then (uk)k satisfies the assumptions of [18 Theorem 1.1] on any Ωεk for k≥k, and therefore by that compactness result and by a diagonal argument on Ωεk, up to a (not relabelled) subsequence, there are a Caccioppoli partition P=(Pn)n of Ω, a sequence of piecewise rigid motions (ak)k satisfying (4), and u∈GSBDp(Ω) such that
uk−ak→ua.e. in Ω.(21)
By the first in (15) we deduce (9a). Eventually, we get (9b) and (9c) by [21 Theorem 11.3] (recall [27 Lemma 2.1]) applied to (uk−ak)k.
Discrete energy estimate
In what follows, (ei)i=1d denotes the canonical basis of Rd.
Lemma 3.Consider the unit cube Q=[0,1]d⊂Rd. Let v∈(Rd){0,1}d be given at all vertices of Q such that vi(x+ei)=vi(x) for any x∈{0,1}d with xi=0 and vi(x+ei+ej)+vj(x+ei+ej)=vi(x)+vj(x) for any x∈{0,1}d with xi=xj=0. For x∈Q, we also denote by v(x) the multilinear interpolation of the values v at the vertices (affine on each [x,x+ei] for any x∈Q with xi=0). Then e(v)=0 in Q (so that, in fact, v is affine with skew-symmetric gradient).
where the last equality follows again by assumption. Hence e(v)=0.
Now, consider d≥3: then for any {i,j}⊂{1,…,d}, the case d=2 shows that e(v)i,j(x)=0 for any x with (xi,xj)∈[0,1]2 and xk∈{0,1}, k∈/{i,j}. Since at any other x∈Q, e(v)i,j(x) is a convex interpolation of those values, we find that e(v)i,j=0 everywhere. Similarly, e(v)i,i(x)=∂ivi(x)=0 for any x∈Q and i∈{1,…,d}. Hence e(v)=0.
Proposition 4. *Consider the unit cube Q, v∈(Rd){0,1}d given at all vertices of Q, and the d-linear interpolation of v inside Q. Then for every p∈[1,+∞) there is a constant C>0
Proof. If not, there is a sequence (vn)n≥1 which satisfies the reverse inequality, with C replaced with n, arbitrarily large. Renormalizing, we may assume that ∥e(vn)∥Lp(Q)=1 and thus that the right-hand side of (17), evaluated for vn, goes to zero as n→∞. By Poincaré-Korn inequality, there is a sequence rigid motions (affine functions an(x)=Anx+bn with skew-symmetric gradient An) such that:
∫Q∣vn(x)−an(x)∣pdx≤c∫Q∣e(vn)∣pdx=c
where c depends only on the dimension and on p. Letting vn′=vn−an, it is bounded in Lp(Q). Since it is, in fact, finite-dimensional (it is a polynomial of degree at most d), it is relatively compact and, up to a subsequence, converges to a limit v′ with ∥e(v′)∥Lp(Q)=1. Yet the right-hand side of (17), for v′, vanishes, so that v′ satisfies the assumptions of Lemma 3 and we deduce e(v′)=0. This is a contradiction, hence the corollary is true. An alternative proof consists in arguing that both left-hand and right-hand sides of (17) define pth-powers of norms on the finite dimensional space (Rd){0,1}d/∼ where u∼v if and only if the d-linear interpolation of u−v is an infinitesimal rigid motion.
Convergence of Discretizations
Let Q(x)=χ[−1/2,1/2)d(x), Δ(x)=∏i=1d(1−∣xi∣)+, for x=(x1,…,xd)∈Rd, and for every k∈N let Tk:Rm→Rm be defined by
Tk(t)=t(1∧∣t∣k).
We remark that for u∈L1(Rd;Rm) it holds that for any R>0,
the discretization of Rd formed by cubes (with the same orientation) of sidelength ε and anchor point y and by uyε:Rd→Rm the corresponding discretized function defined by
uyε(x):=xˉ∈Dyε∑u(xˉ)Δ(εx−xˉ)for all x∈Rd.(24)
In the following notation for the norms, we denote by L1(Bk) the space L1(Bk(0);Rm), with Bk≡Bk(0)⊂Rd the ball of center $0andradiusk.
Lemma 5. Let u∈L0(Rd;Rm) and assume that for all ε>0 there exists yε∈Q such that for any k∈N∖{0}
Observe that this quantity is zero, except possibly in the cubes with center a point xˉ such that ∣u(xˉ)∣>ℓ, in which case it is bounded (in norm) by 2k. Hence we get the bound
Recalling the notation (24), the following lemma holds.
Lemma 6. Let u∈L0(Rd;Rm) and (uyεε)ε>0 be such that (26) holds. Then
uyεε→ulocally in L0(Rd;Rm).(29)
Proof. Fix η>0, R>0. For any x and any k∈N∖{0}, k≥2η, it holds that if ∣uyεε(x)−u(x)∣>η then either ∣u(x)∣>k/2, or ∣Tk(uyεε(x))−Tk(u(x))∣>η. Hence, for k≥R,
Proposition 7. For any u∈L0(Rd;Rm) and for all ε>0 there exists a measurable set Qε⊂Q=[0,1)d such that both limε→0∣Qε∣=1 and uyεε→u locally in L0(Rd;Rm) if yε∈Qε for every ε>0.
Proof. By Lemma 5 and Lemma 6, it is enough to find a set Qε such that (20) holds for any choice of yε∈Qε. For y∈Q, we let:
For any bounded function with compact support v∈L∞(Rd), and a continuous function ψ:Rd→[0,1] with compact support such that ∑z∈Zdψ(x−z)=1 for any x∈Rd, one has
Since the terms in the sum above are uniformly bounded (by 4k2−k(1+∣Bk∣) for ε small enough) and go to zero, we deduce that
ε→0lim∫QΦε(y)dy=0.
We can then choose Qε:={y∈Q:Φε(y)≤∫QΦε}, which is such that ∣Q∖Qε∣≤∫QΦε.
If one chooses yε∈Qε, then for each k, both L1 norms in (20) are bounded by 2k∫QΦε, which goes to zero. Then we conclude by Lemma 6. □
Remark 2. Proposition 7 implies that uyεε converge to u a.e. in Rd, up to a subsequence εn↓0. We remark that such convergence may be recovered directly, without using Lemma 6, by modifying the argument in the proof of Proposition 7 as follows. With the notation in the proof of Proposition 7, first let εn such that ∫QΦεn≤2−n. Then, letting Qn:=⋂h≥nQεh, we find that ∣Q∖Qn∣≤2−n+1 and for any y∈Qn and h≥n, Φεh(y)≤2−h. Therefore, for Q:=⋃n≥1Qn, we find that ∣Q∣=1 and for any y∈Q, Φεh(y)≤2−h for h large enough (depending on y).
Next, once the main result is proven, we can choose a (further) subsequence εk↓0 such that for each k,
∥Tk(uyεkεk)−Tk(u)∥L1(Bk)≤2−k.
Then, ∑k∣(Tk(uyεkεk(x))−Tk(u(x)))χBk(x)∣<+∞ for a.e. x∈Rd, which shows that
uyεkεk→ua.e. in Rd as k→+∞.
As a consequence, if one considers instead a subsequence in Proposition 7, one can replace Qε by the set Q of full measure, independent on ε, and assume that the convergence is almost everywhere.
Acknowledgements
Acknowledgements. V.C. acknowledges the support of the MUR - PRIN project 2022J4FYNJ CUP B53D23009320006 “Variational methods for stationary and evolution problems with singularities and interfaces”, PNRR Italia Domani, funded by the European Union via the program NextGenerationEU. V.C. is member of the Gruppo Nazionale per l’Analisi Matematica, la Probabilità e le loro Applicazioni (INdAM-GNAMPA). Most of this work was done while A.C. was visiting the Dipartimento di Matematica, Università di Roma–La Sapienza, thanks to the “Dipartimento di Eccellenza Project CUP B83C23001390001”.
References
CEREMADE, CNRS, Université Paris-Dauphine, Univ. PSL, France and Mokaplan, INRIA Paris. Email address, Antonin Chambolle: [email protected]
Dipartimento di Matematica Guido Castelnuovo, Piazzale Aldo Moro 5, 00185 Roma, Italy. Email address, Vito Crismale: [email protected]
References
[1]S. Almi, E. Davoli, A. Kubin, and E. Tasso, On De Giorgi’s conjecture of nonlocal approximations for free-discontinuity problems: The symmetric gradient case, Preprint 2024, https://arxiv.org/abs/2410.23908.
[2]S. Almi and E. Tasso, A general criterion for jump set slicing and applications, Preprint 2022, https://arxiv.org/abs/2212.09822.
[3]S. Almi and E. Tasso, A new proof of compactness in G(S)BD, Advances in Calculus of Variations, (2022).arxiv.org/abs/2104.13141
[4]L. Ambrosio, Existence theory for a new class of variational problems, Arch. Rational Mech. Anal., 111 (1990), pp. 291–322.DOI
[5]L. Ambrosio, On the lower semicontinuity of quasiconvex integrals in SBV(Ω,Rᵏ), Nonlinear Anal., 23 (1994), pp. 405–425.DOI
[6]L. Ambrosio, A. Coscia, and G. Dal Maso, Fine properties of functions with bounded deformation, Arch. Rational Mech. Anal., 139 (1997), pp. 201–238.DOI
[7]L. Ambrosio, N. Fusco, and D. Pallara, Functions of bounded variation and free discontinuity problems, Oxford Mathematical Monographs, The Clarendon Press, Oxford University Press, New York, 2000.
[8]J.-F. Babadjian, Traces of functions of bounded deformation, Indiana Univ. Math. J., 64 (2015), pp. 1271–1290.arxiv.org/abs/1308.5497
[9]J.-F. Babadjian, F. Iurlano, and A. Lemenant, Partial regularity for the crack set minimizing the two-dimensional Griffith energy, J. Eur. Math. Soc. (JEMS), 24 (2022), pp. 2443–2492.
[10]F. Cagnetti, A. Chambolle, and L. Scardia, Korn and Poincaré–Korn inequalities for functions with a small jump set, Math. Ann., 383 (2022), pp. 1179–1216.DOI
[11]A. Chambolle, An approximation result for special functions with bounded deformation, J. Math. Pures Appl. (9), 83 (2004), pp. 929–954.DOI
[12]———, Addendum to: “An approximation result for special functions with bounded deformation” [J. Math. Pures Appl. (9) 83 (2004), no. 7, 929–954; mr2074682], J. Math. Pures Appl. (9), 84 (2005), pp. 137–146.
[13]A. Chambolle, S. Conti, and G. Francfort, Korn-Poincaré inequalities for functions with a small jump set, Indiana Univ. Math. J., 65 (2016), pp. 1373–1399.
[14]A. Chambolle, S. Conti, and F. Iurlano, Approximation of functions with small jump sets and existence of strong minimizers of Griffith’s energy, J. Math. Pures Appl. (9), 128 (2019), pp. 119–139.arxiv.org/abs/1710.01929
[15]A. Chambolle and V. Crismale, A density result in GSBDᵖ with applications to the approximation of brittle fracture energies, Arch. Ration. Mech. Anal., 232 (2019), pp. 1329–1378.DOI
[16]———, Existence of strong solutions to the Dirichlet problem for the Griffith energy, Calc. Var. Partial Differential Equations, 58 (2019), pp. 27, No. 136.DOI
[17]———, Compactness and lower semicontinuity in GSBD, J. Eur. Math. Soc. (JEMS), 23 (2021), pp. 701–719.arxiv.org/abs/1802.03302
[18]———, Equilibrium configurations for nonhomogeneous linearly elastic materials with surface discontinuities, Ann. SNS Pisa Cl. Sci., 24 (2023), pp. 1575–1610.arxiv.org/abs/2006.00480
[19]———, A general compactness theorem in G(S)BD, Indiana Univ. Math. J., Preprint 2022, in press (2025).arxiv.org/abs/2210.04355
[20]S. Conti, M. Focardi, and F. Iurlano, Existence of strong minimizers for the Griffith static fracture model in dimension two, Ann. Inst. H. Poincaré C Anal. Non Linéaire, 36 (2019), pp. 455–474.arxiv.org/abs/1611.03374
[21]G. Dal Maso, Generalised functions of bounded deformation, J. Eur. Math. Soc. (JEMS), 15 (2013), pp. 1943–1997.DOI
[22]E. De Giorgi and L. Ambrosio, New functionals in the calculus of variations, Atti Accad. Naz. Lincei Rend. Cl. Sci. Fis. Mat. Nat. (8), 82 (1988), pp. 199–210 (1989).
[23]G. De Philippis and F. Rindler, On the structure of A-free measures and applications, Ann. of Math. (2), 184 (2016), pp. 1017–1039.arxiv.org/abs/1601.06543
[24]———, Fine properties of functions of bounded deformation, special issue on “Variational models in elasticity”, AIMS Math. Eng., 2 (2020).
[25]G. A. Francfort and J.-J. Marigo, Revisiting brittle fracture as an energy minimization problem, J. Mech. Phys. Solids, 46 (1998), pp. 1319–1342.DOI
[26]M. Friedrich, A piecewise Korn inequality in SBD and applications to embedding and density results, SIAM J. Math. Anal., 50 (2018), pp. 3842–3918.arxiv.org/abs/1604.08416
[27]———, A compactness result in GSBD^p and applications to Γ-convergence for free discontinuity problems, Calc. Var. Partial Differential Equations, 58 (2019), pp. 31, No. 86.
[28]M. Friedrich, C. Labourie, and K. Stinson, On regularity for griffith almost-minimizers in the plane, Preprint 2023, https://arxiv.org/abs/2310.07670.
[29]M. Friedrich, M. Perugini, and F. Solombrino, Lower semicontinuity for functionals defined on piecewise rigid functions and on GSBD, J. Funct. Anal., 280 (2021), pp. 45, No. 108929.arxiv.org/abs/2002.08133
[30]M. Friedrich and F. Solombrino, Quasistatic crack growth in 2d-linearized elasticity, Ann. Inst. H. Poincaré Anal. Non Linéaire, 35 (2018), pp. 27–64.arxiv.org/abs/1604.08338
[31]F. Iurlano, A density result for GSBD and its application to the approximation of brittle fracture energies, Calc. Var. Partial Differential Equations, 51 (2014), pp. 315–342.DOI
[32]R. Temam, Mathematical problems in plasticity, Gauthier-Villars, Paris, 1985. Translation of Problèmes mathématiques en plasticité. Gauthier-Villars, Paris, 1983.
[33]R. Temam and G. Strang, Duality and relaxation in the variational problem of plasticity, J. Mécanique, 19 (1980), pp. 493–527.