WorksPhysics and Astronomy
Carbon Nitride: Physical properties and Applications
Abstract
Graphitic carbon nitride has emerged as a versatile, metal-free semiconductor with applications spanning over broad range of domains encompassing energy storage, environmental remediation and sensing. Despite significant progress in recent years, there remains a lack of comprehensive discussion on the graphitic carbon nitride's evolving role in next-generation technologies and the engineering strategies needed to overcome existing challenges. In this review article, the critical assessment of the physicochemical properties of graphitic carbon nitride which holds potential to enable its function across diverse applications has been elucidated. Current advances in doping, heterojunction formation and composite engineering that enhances its catalytic and electronic performance has been summarized. The article also presents future research directions to unlock the full potential of graphitic carbon nitride as a useful material in sustainable and intelligent systems.
Introduction
Ever since the discovery of graphene in 2004 [1], there has been a huge increase in the research and development of carbon based lower-dimension materials [2, 3, 4, 5]. This is due to the abundant and cheap availability of carbon as an element. Another reason is the organic and environment friendly nature of carbon-based nano materials, which can be used as resource for the production of energy in a non-toxic manner [6, 7]. Carbon nitrides have been pretty promising carbon-based material complimenting harmful carbon-based compounds in material applications. Among all of the carbon nitride allotropes, g- is regarded as the most thermally and chemically stable compound under ambient conditions [8]. Melon, which is one of the parent polymers which decompose to form g-, is considered to be one of the oldest polymers with its synthesis and nomenclature dating around 1834 [9]. The compound could not be studied further up until recently due to its high chemical stability as well as insolubility in acidic, basic and organic solutions.
g- is a polymeric, highly defective and nitrogen rich metal free material. It’s carbon and nitrogen composition along with its organic chemistry makes possible to modify its reactivity without much change in its chemical composition [10]. Due to its configuration, a number of organic, inorganic compounds or, metals can be combined with g- to form composites having desirably tuned properties [11, 12, 13]. g- is a medium band gap, indirect semiconductor having a band gap of 2.7 eV which along with other properties such as good visible light absorption and high photoluminescence makes it suitable for optoelectronics [14], electrochemistry [15] as well as sensing applications [16, 17]. The fluorescence properties of g- have been utilized for bio-imaging purposes in order to identify internal damages/ diseases inside the body. [18]. Recently, various g- composites have shown remarkable results in energy storage applications such as Li-ion storage [19] and supercapacitors [20].
The cost effectiveness, facile synthesis, robust nature plus the chemical and electronic configurations of g- has steered a wider pathway for research in organic semiconductor electronics. This review article presents an account of basics of synthesis of g- in bulk and nano-dimensions in addition to the structure, properties and its major applications.
Synthesis of Bulk g-
The popular methods used for the bulk synthesis of graphitic are namely solvothermal method, solid state reaction or thermal nitration depending upon the desired crystallinity or C: N ratio. The easiest and most common method is the direct heating of reagents in air or in the presence of inert atmosphere. These reagents are nitrogen rich compounds having C-N bonded molecules as their core configuration. These structures exist in the form of triazine () isomers, mostly- 1, 3, 5- triazine or as heptazine/ tri-s-triazine (having three triazine rings fused together) as shown in Figure 1. However, the compounds formed by tri-s-triazine based reagents have been found to be 30 more stable. [21]. Previously, the common reagents used for the bulk synthesis were cyanamide and/or dicyandiamide which went through polycondensation to form various intermediates depending on the change in temperature.

Figure 1. (a) Triazine structure and (b) tri-s-triazine (heptazine) structure of g-CN [22].
Deamination occurs at temperatures above its melting point to give melamine-based compounds up to 350 °C. Melamine further rearranges to form tri-s-triazine based compounds at 390 °C. These polymers condense to form around 520 °C [8]. Since cyanamide is costly as well as highly explosive, we simply use melamine or urea as precursors. On further heating, Melamine sublimates and condensates in the temperature range of 280-400 °C into melem and melon as shown in Figure 2. At temperatures above 650 °C the starts becoming unstable [23]. We can also synthesize bulk using urea as a precursor. Liu et al. thermally treated urea in a closed crucible under ambient pressure and in the presence of air. Urea when heated at around 550 °C - 660 °C gives yellowish residue which is [24]. The closed environment prevents sublimation of the precursors. Also, the temperature range of 550 °C to 600 °C yields having different performances depending upon the temperature range and the time period for which it is kept at a particular temperature. Papailias et al. studied the differences of processing temperature on the structure and photocatalytic properties of . They observed that the final products were different in color and the final product yield decreased with the increase in temperature as well [25].

Figure 2. Thermogravimetric curve of annealing of melamine leading to formation of at temperature of . [23].
Nano/Micro Dimensional Synthesis
Due to the extraordinary performance of in electronic as well as electrochemical fields, the need to synthesize it easily in nano or micro dimensions in order to make hetero-structures has increased. The growth of thin films via Physical or Chemical vapor deposition has also been an issue. Tanaka et al. used ion beam assisted deposition using pellets for thin film growth on Si substrate but the films were of and had presence of hydrogen as well [26]. In the thin film deposition techniques, the quantization of nitrogen has not been successfully done yet. Popular methods to reduce the dimensions of bulk are chemical exfoliation and thermal oxidation. Feng et al. used Hummers method to form nanorods from bulk [27]. Pawar et al. synthesized microrods using different concentrated acids to etch and exfoliate the bulk g- simultaneously. They found out that the rods formed using were the most uniform [28]. Tahir et al. annealed melamine with appropriate amount of ethanol and in a CVD to obtain nanofibers having diameter of 100 nm and 20 m in length [29]. Wang et al. synthesized nanotube type g- by directly heating packed melamine [30]. The chemical exfoliation of bulk g- is most widely used to obtain nanosheets as shown in Figure 3. Zhang et al. calculated and compared the surface energies of bulk g- and to find that g- nanosheets can be exfoliated using water. The thickness of the nanosheets were found to be nm [31, 32]. Xu et al. in the same year, extracted a single atomic layer nanosheet with thickness nm using chemical exfoliation [33]. Niu et al. synthesized g- nanosheets by thermal ‘oxidation’ etching in the presence of air and observed that the thickness of g- decreased with increased etching time [34]. Generally the etching is done with , ethanol, or acetone sometimes assisted with water through ultrasonication [35]. However, Fang et al. obtained the nanosheets having large area aspect ratio i.e. lateral size more than 15 m using Anhydrous Ethylenediamine as assistant reagent and optimizing the etching treatment time [36]. The Schematic of synthesis of bulk g- from standard pyrolysis of Urea is shown in Figure 4. Li et al. prepared carbon rich g- nanosheets by the self-modification of polymeric melon units through thermally treating bulk g- in air and in atmosphere successively [37]. Sun et al. used commercially available carbonated beverages to synthesize mesoporous g- nanosheets [38]. Though it has been tougher to obtain 2D thin films of g- without altering the composition of Nitrogen, there have been some successful productions of thin films. Mao et al. extracted g- nanosheets on FTO glass to study their photoelectrochemical properties [39]. Jia et al. deposited g-CN on both sides of a glass substrate simply by using melamine and urea as precursor and heating them at 550 °C in nitrogen rich atmosphere. The crucible was covered completely with aluminum foil. They also found out that the thickness of the film deposited could be changed by changing the amount of precursors used [40]. Even though we have come a long way in the synthesis and optimization of nano/micro scale graphitic-CN, the perfect method for large scale production without major changes in the C-N configuration has to be achieved yet.

Figure 3. Schematic of the synthesis procedure of g-CN. (a) liquid-exfoliation process from bulk g-CN to ultrathin nanosheets. (b) Photograph of bulk-CN and suspension of ultrathin g-CN nanosheets. (c) Schematic of the perfect crystal structure of the g-CN projected along the z-axis [31].

Figure 4. Schematic of synthesis of bulk (a) standard pyrolysis of Urea (b) Washing / drying and (c) further exfoliation and dispersion in methanol for ~5 min (d) further aging for ~3 days and removing of top supernatant dispersion of highly stable nanosheets. (e) Illustration of bulk , (f) undergoing ultrasonication and resulting in exfoliated nanosheets and (g) actual thin film together with fluorine doped tin oxide (FTO) glass substrate. [41]
Properties
Graphitic carbon nitride is a polymeric compound with different bonds. In some cases, presence of hydrogen is also observed which indicates the presence of amines due to incomplete decomposition of precursors. It is stable hydrothermally i.e., it is insoluble in water, toluene, ether, THF etc. which makes it a promising candidate for catalysis. Several researchers have characterized graphitic carbon nitride in its bulk as well as exfoliated form to study its optical, electronic as well as electrochemical properties. Besides SEM, TEM and AFM used for the morphological characterization, the characterization techniques to quantify the properties include: thermal gravimetric analysis (TGA) for thermal stability, FTIR spectroscopy, X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), Raman Spectroscopy as well as Diffuse reflectance spectroscopy (DRS) and Photoluminescence (PL) for the emission and absorption spectra. Here, first the bulk properties of would be discussed and then these properties will be compared with that of the exfoliated or synthesized in smaller dimensions.
Structural properties
The crystallographic properties of bulk as well as nano dimensional are mainly studied via their TEM (Transmission electron microscopy), HRTEM (High resolution, AFM, and SEM. Figure 5 is the HRTEM micrograph of the material. The image indicates a close to hexagonal arrangement of the scaffolding tri-s-triazine structure with apparent interplanar distances between 0.58 and 0.65 nm [8]. A perfect crystalline material consisting of tri-s-triazine units would reveal a sixfold or threefold symmetry with distances of nm. The material is rich in defects, i.e. it grows in the form of polymer material and not as a single crystal. Measurements of the inter-layer distance from the HRTEM micrograph reveals a spacing of nm, which is in good agreement with the XRD data [8].
Figure 5. (a) TEM micrograph of the crystallized g-. It shows layered platelet like morphology. (b) Shows in-plane organization of the g- formed by tri-s-triazine units. (b) Shows that the hexagonal symmetry is broken, indicating either connectivity defects or angularity of view. The SAED pattern is shown in inset of figure. (c) HRTEM showing Graphite-like stacking of g-. Areas 1 and 2 reveal an inter-planar distance of 0.327 nm and a periodicity within the layers. Due to stacking faults streaks are visible [8].

Figure 10 (PDF p. 11).
Xu et al. exfoliated a single layer of - and did the morphological analysis via TEM and AFM. The thickness analysis of the nanosheets by AFM revealed an average thickness of about 0.4 nm, which is very close to the theoretical thickness of monolayer - (about 0.325 nm) as shown in Figure 6. The very transparent feature of the nanosheets in the TEM analysis indicates the ultrathin thickness of the nanosheets. The darker part in the TEM image can be attributed to the overlap of several - nanosheets or a multilayer nanosheet [33].

Figure 6. Typical (a) AFM images and (b) TEM images of the as-prepared Monolayer- nanosheets. The tables and curves in the right panel shows the height and width information of different nanosheets from the AFM images [33].
The X-Ray Diffraction of bulk - shows two distinct diffraction peaks, one at indexed as (002) with interlayer spacing nm of the aromatic units and the other one at indexed as (100) with nm attributed to interlayer stacking [42, 43]. The peak at 13.04° vanishes or becomes less pronounced when we characterize nanosheets or nanofibres due to decreased planar size [44]. When the samples were prepared by direct polymerization, Hong et al. noticed that the (002) peak intensity of as-prepared samples related to the interlayer stacking became weaker and broader with increasing the polymerization temperature, revealing the reduced layer thickness [45]. In case of nanofibres, Tahir et al. observed only one peak at 27.3° indicating long range inter-planar stacking [30]. Niu et al. also detected that the peak at 27.34° from periodic stacking shifted to 27.67° indicating a decreased gallery distance between the basic sheets in a nanosheet [35]. It has been observed that due to the formation of crumples and agglomerates, the XRD pattern of exfoliated nanosheets might be similar to that of bulk - [46]. Xu et al. found that for monolayer -, the peak at 27.04° weakened significantly as visible in Figure 7 [33].

Figure 7. X-ray diffractogram of nanoscale with different diameters. The interlayer periodicity (reflex at , nm) is broadened due to geometric confinement while, the (002) interlayer spacing is weakly affected [47].
Raman Spectroscopy is used to investigate the crystalline quality, symmetry, defects, strain, number of layers and electronics properties of materials [48]. The most intense feature is observed in the Raman shift range of 900 to 1800 with two prominent modes namely D and G-bands. The lower energy one is called the D band and the higher energy one is called the G band. The G mode is related to the main mode of crystalline graphite, the former related to the finite size of the graphitic domains [49]. The characteristic peaks for bulk g- are observed at 1616, 1555, 1481, 1234, 751, 705, 543, and 479 [50]. However, the signature peaks of g- are 711 (heptazine ring breathing mode) and 1233 (stretching vibration modes of C=N and C–N heterocycles) as shown in Figure 8 [51]. The Raman peaks observed at approximately 707 and 986 for all the samples and are attributed to different types of ring breathing modes of s-triazine which is present in the g-. Generally, the nanosheets show peaks similar to that of the bulk i.e. there are two characteristic bands related to the disordered D (around 1300 ) and graphitic G (around 1500 ) bands, indicating the formation of graphitic structure. The Raman bands at 600–800 can be attributed to the in-plane rotation of sixfold rings in a graphitic carbon nitride layer [33]. However, the nanosheets show a blue shift of about 5 compared with bulk , which is due to the phonon confinement effect of exfoliated nanosheets implying their thickness [52]. Jiang et al. observed that the ratios of and were increased from 0.25 and 4.4 for bulk g-h-heptazine- to 1.0 and 8.1 for 1-layer g-h-heptazine-. They also observed that the peaks at 1224 might be ascribed to the C=C () bending vibration. It was shifted by 8 towards high frequency after the bulk sample was exfoliated into the few-layer samples, probably due to electrophilic effect and the quantum effect of the ultrathin (nano-sized) layer coplanar g-h-heptazine-, leading to the enhanced strength of C–N covalent bonds [51].

Figure 8. Comparison between the Raman spectra of coplanar bulk and 1-layer g-h-heptazine-C₃N₄, samples (excitation wavelength 780 nm) [51].

Figure 9. Raman spectra of bulk g-C₃N₄, and g-C₃N₄ nanosheets (upon 785 nm excitation).
[53].
The finger prints of various functional groups present on the surface is mapped using Fourier Transform Infrared Spectroscopy (FTIR). In FTIR spectrum, bulk g-C₃N₄ shows a sharp peak at , characteristic absorption peak of triazine unit in g-C₃N₄ [40]. In addition to it, bands are observed in the region of – and – typical of vibrations of C-N bonds, which belong to the skeletal stretching modes of aromatic rings [54, 55]. The peak at is attributed to C-N stretching vibration modes, while the , , and are associated with aromatic C-N stretching. The prominent absorption bands at and and possibly have been shown to be characteristic of the C-NH-C unit in melam [56]. Therefore, a similar structural motif, corresponding to either trigonal CN(-C)C (full condensation) or bridging C-NH-C units (partial condensation) can be inferred

Figure 12. FTIR spectra of bulk g- and g- nanosheets [60].

Figure 13. The FTIR spectra of the bulk and nano-sheets along with the major components for the corresponding peaks [61].
for the polymer [34, 57]. Broad band between 3100 to 3300 shows the uncondensed terminal amino group (- OR =NH group) which becomes stronger at a higher temperature, i.e. more amino groups are generated [57]. Tong et al. observed that in case of nanosheets, the intensity of peaks 900-1800 changed with respect to that of the bulk material, resulting from the protonation and disintegration of g- [44]. Bai et al. observed that the peaks were stronger at 1241 (C-N) and 1631 (C=N) along with a new peak at 791 attributed to more heptazine rings and less surface defects for synthesized nanorods [43]. Pawar et al. observed that the band at 3500 was strongest for the nanorod sample chemically exfoliated using , which may have resulted from slight oxidation of the g- by the strongly oxidizing sulfuric acid [28]. Fang et al. observed that some peaks of 2D nanosheets were sharper than that of bulk g-, which is due to the more ordered packaging of tri-s-triazine motifs in the nanosheets. At 2180 , the vibration peak becomes more distinct which might descend from more molecules or amino groups bonding on the surface of g-, implying that the nanosheets have enlarged open-up surface [58, 59].
X-Ray Photoelectron Spectroscopy of materials reveal the presence of variety of atoms in terms of survey scan spectra and relative percentage of hybridization states in terms of core level spectra. XPS spectra represents the number of detected electrons as a function of the binding energy of the detected electrons within a material when it is exposed to a beam of X-rays. It is a surface sensitive technique and can only measure a material surface within 10 nm. The XPS spectrum of g- gives information about the chemical states of the material. The spectrum shows two peaks at about 284.6 eV and 288.0 eV. The 288.0 eV peak is further deconvoluted into two Gaussian-Lorenzian peaks. The main contribution peak at 287.9 eV is attributed to the hybridized carbon bonded to N inside the triazine rings, while the peak at 288.6 is assigned to the -hybridized carbon in the triazine ring bonded to the – group. The peak at 284.6 eV is typically ascribed to C=C bonds [33, 62]. The spectrum from was deconvoluted by three components at binding energies of 399.2, 401.2 and 404.4 eV. The main peak at 399.2 eV is assigned to C-N-C coordination, while the peak at 401.2 eV is assigned to N-(C) of the tertiary N from the bridges and the center of the tri-striazine units. The weak shoulder component at 404.4 eV is due to excitations [63]. Yang et al. observed that the lowest energy contribution C at 283.8 eV which is typically assigned to graphitic C=C or/and the cyano- group in the literature becomes clearer in the case of nanosheets with respect to that of bulk g-CN, indicating little nitrogen is removed during the sonication process [64]. Sometimes, weak O signals are also observed in the XPS spectra which can be ascribed to the absorbed oxygen species on sample surface and the slightly higher O peak for nanosheets may be due to their high specific surface area and protonation by HSO [44]. Deconvolution of the XPS signals also reveals a weak additional signal at 401.4 eV, indicative of amino functions carrying hydrogen (C–N–H) which is attributed to the charging effects [8]. For g-CN nanosheets, a new peak located at 403.2 eV becomes noticeable which is due to the protonation of g-CN nanosheets, which causes CN heterocycles and cyano groups to be positively charged [53]. According to the percentage of C and N determined by the XPS, Niu et al. observed that the surface atomic ratio of C to N increased from 0.65 for bulk g-CN to 0.83 for nanosheet due to the oxidation of nitrogen [34]. Also, while shifting from nanoplates to nanorods Bai et al. found that although the XPS peaks were almost same for nanoplates and nanorods, nanorods had a higher intensity of the peak around 398.5 eV () and 400.1 eV () suggesting that the nanorods had more heptazine units and less surface defects [43].

Figure 14. XPS spectra of bulk (a) for the carbon core and (b) for the Nitrogen core. [39].

Figure 15. and XPS spectra of: a) bulk , and b) nanosheets. The peak of at 284.6 eV arises from the adventitious carbon in the samples. [34].
Optical Properties
UV-Vis absorption spectra: UV-Visible Diffuse Reflectance Spectroscopy (DRS) is an important method to explore the band-gap of the solid materials. The DRS of bulk shows a single light absorption edge at around 450 nm. This absorption peak is characteristic of polymers and corresponds to the intrinsic electronic transition [65, 66]. This indicates that the material can be excited under visible light irradiation [67]. The spectra, however, depends on the heating temperature as well as the precursor used. Zou et al. reported the absorption edge at 443 nm for bulk prepared by direct pyrolysis of guanidine hydrochloride [60]. Yan et al. compared the DRS spectra of bulk prepared by heating Cyanamide at 550 ºC with the DRS of bulk prepared by heating melamine at different temperatures. They observed that the absorption edges of the samples obtained from heating melamine shifts remarkably to larger wavelengths with increasing heating temperature. The band gap of the samples also decreased from 2.8 eV to 2.75 eV when heating temperature is increased from 500 to 580 °C [42]. The red shift of the absorption spectra of bulk is due to the extended delocalization of 2D electrons. [65, 68] Jia et al. reported that the bandgap of prepared by melamine and urea is larger than the prepared using only melamine (2.73 eV) but smaller than prepared using urea (2.87eV) [40]. As the dimensions are decreased, the spectra blue shifts. Contrary to the bulk materials, this blue shift goes on increasing with increasing temperature. Tahir et al. observed that for nanofibres the band edge is shifted from 465 nm to 443 nm and the band gap is changed from 2.67 eV to 2.80 eV. This is due to more efficient packing, electron coupling as well as the quantum confinement effect. This also proves that the nanofibres have lesser defects and a slower recombination rate [29]. The absorption spectra of nanosheets do extend to the whole visible light region and even to the IR region enhancing the absorbance of light.
For a monolayer nanosheet, Xu et al. reported blue shift in absorption edge from 470 nm for bulk to 425 nm corresponding to the increase in bandgap from to [33]. Again, this is attributed to the strong quantum confinement effect and decrease in conjugation length.

Figure 16. UV-vis absorption spectra for commercial N-doped-TiO and samples obtained by heating the different precursors at different temperatures [42].

Figure 17. Shows the difference in the UV–vis DRS spectra i.e band gaps (inset) of bulk g-C₃N₄ and its nanosheets [60].
Photoluminescence (PL):
The PL emission for bulk g-C₃N₄ shows a strong peak at 464 nm. Zhang et al. studied the changes in the emission peak along with the change in temperature (300 ºC to 650 ºC) for bulk g-C₃N₄ and observed that the PL of the product slightly red shifts with the processing temperature. Under 280 nm wavelength excitation, the center of the peak shifts from 400 to 510 nm with increasing temperature. This PL excitation band can be attributed to the transition between the lone pair valence band and the conduction band [69]. This red shift can be explained by the extension of the g-C₃N₄ network at higher temperatures. When more heptazine is connected by the amino group, the states will hybridize into a broad state, causing the bandgap narrowing of the C–N clusters [70, 71]. Zhang et al. studied the PL behavior for nanosheets and noted that as we move on to smaller dimensions, the PL spectra blue shifts due to the quantum confinement effect with the conduction band and valence band shifting to the opposite directions. They also reported the pH dependence of the PL of the nanosheets and attributed this dependence to the presence of free zigzag sites. They also reported the PL quantum yield to be 19.6 % which was much higher than that of bulk g-CN (4.8 %) [31]. Wang et al. reported that for nanotube type graphitic carbon nitride (GCN) a broad PL excitation band with peak at

Figure 18. The PL excitation spectra of the carbon nitride products synthesized via the thermal condensation of melamine at different temperatures for 2 h indicating variation in the optical band-gap [69].
460 nm was observed [30]. In case of nanofibres, Tahir et al. reported that the graphitic carbon nitride nanofiber (GCNNF) had larger bandgap and the PL peak had a lower intensity than that of bulk graphitic carbon nitride, due to the presence of lesser defects in the nanofibres and a slower recombination rate of electrons and holes [29].

Figure 19. (a) UV–visible absorption spectra. (b) Normalized photoluminescence spectra of bulk g-CN and ultrathin g-CN nanosheets; inset of (b) is the color change of ultrathin g-CN nanosheets solution before and under UV light illumination. (c) Dependence of PL intensity on UV-light illumination time for ultrathin g-CN nanosheet solution. (d) The pH-dependent PL behavior of ultrathin g-CN nanosheet aqueous solution [31].

Figure 20b. PL spectrum of GCNNF and GCN. It shows that the graphitic carbon nitride nanofiber (GCNNF) had larger bandgap and the PL peak had a lower intensity than that of bulk graphitic carbon nitride, due to the presence of lesser defects in the nanofibres and a slower recombination rate of electrons and holes [29].
Thermal Properties
- is non-volatile up to . Li et al. analyzed the effect of temperature on - formation using melamine as a precursor [72]. Thermo-gravimetric analysis (TGA) and differential thermal analysis (DTA) in the presence of air shows a sharp weight loss step in the temperature range of about 550 to 700 °C as seen in Figure 21, which is attributed to the oxidation of the g-C₃N₄ to form graphite and N₂. The exothermic peak at 740°C may be caused by the oxidation of graphite to form CO₂ [72]. An initial weight loss is also observed below 200 °C, which arises from the evaporation of adsorbed water to the sample surface. Yan et al. on doing thermal characterization of g-C₃N₄ (synthesized via heating melamine) through DSC-TGA observed that the strongest endothermal peak was at temperatures 297-390 °C where the weight of the sample decreased rapidly as visible in Figure 22. Two weak endothermal peaks were also found at 545-630 °C, whereas two exothermic reaction peaks attributing to the disappearance of material were observed at

Figure 21. The TGA-DTA spectrum of g-C₃N₄. It shows stability of g-C₃N₄ upto 550 °C. [72].

Figure 22. TGA-DSC thermograms for heating (a) the melamine and (b) the g- obtained by heating melamine at 520 °C [42].
660–750 °C. They also observed that g- was more stable in a semi closed ammonia atmosphere than in an open system [42].
Applications
Since g- is a visible light polymeric i.e nonmetallic, highly stable n-type semiconductor having a band gap of eV (medium bang-gap) corresponding to an optical wavelength of nm, it finds scope for wider range of applications like photodetectors, photocatalytic and generation, photocatalytic degradation of dyes and pollutants sensors, super capacitors, Li-ion batteries, bio-imaging and anticorrosive coating etc [10, 73]. Each of these applications and the performances achieved using g- has been summarized next.
g- as Photo-catalysts
Wang et.al in [74] was the first one to use as a photo-catalyst for water splitting.
They observed that the band gap of was large enough to overcome the endothermic character of water splitting (1.23 eV theoretically) [74]. Its band gap also falls in the range of visible light absorption ( eV) [75]. In spite of these unique properties, it has been challenging to use bare as a photo-catalyst due to several drawbacks such as low quantum efficiency (0.1 %) at 420-460 nm [76, 77, 78] high electron-hole recombination rate, low surface area, and smaller active sites [79]. It has strong reduction reaction properties owing to the high potential of the conduction band but inferior oxidation capabilities due to its valence band located at about 1.4 eV vs. NHE (Normal Hydrogen Electrode) resulting in a small thermodynamic driving force for water or organic pollutants oxidation [80]. Several approaches have been taken to overcome these issues to modify the structure of by doping it with impurities or forming its hetero-structures.
In the properties section, how the efficiency of varies as we shift to the lower dimensions has been discussed. The PL quantum yield of nanosheets increase from ~ 4.8 % to 19.6 % [31]. In case of nanorods, the band gap decreases from 2.75 eV to 2.66 eV depicting a lower recombination rate of electrons and holes under visible light irradiation [43]. Niu et al. detected the amount of radicals generated using nanosheets and found that the evolution rate of nanosheets under UV-Vis light was 170.5 , which is 5.4 times higher than its bulk counterpart. The surface area is increased from 50 mg to 306 mg [34]. Given below is a table of plain g-CN counterparts and their respective hydrogen evolution rate.
| Photocatalyst | Hydrogen evolution (molh) | Amount of photocatalyst (mg) | Light source | AQE | Reference |
| Pt-g-CN/CdS With 2% Pt co-catalyst | 35,300 | 20 mg | 300 W Xe lamp ( nm) | 24.8% at 420 nm | [79] [79] |
| Zn doped g-CN With 1% Pt co-catalyst | 78.7 | 75mg | 250W mercury lamp (nm) visible light | [81] [81] | |
| g-CN (ZIS-S/CN) With 3% Pt co-catalyst | 6100 | 50 mg | 300 W Xe lamp (nm) visible light | 12.9% at 400 nm | [82] [82] |
| g-CN with 3% Pt | 4910 | 50 mg | 250 W Xe lamp ( nm) visible light | 14.07% at 479 nm | [83] [83] |
Table 1. Summary of use of g-CN as photo-catalyst.
| Photocatalyst | Catalyst amount | H production | Light source | Efficiency | Wavelength | Reference |
| g-CN/saPt | 50 mg | 14,740 | 300 W Xe lamp ( nm), visible light | 38.8% | at 435 nm | [84] [84] |
| G-g-CN | 18,900 | 50 mg | 350 W Xe lamp | 19.4% | at 420 nm | [85] [85] |
| g-CN/PTEtOH With 1% Pt co-catalyst | 2424 | 100 mg | 300 W Xe lamp ( nm), visible light | 9.5% | at 405 nm | [86] [86] |
| g-CN/InO cube With 3% Pt co-catalyst | 1917 | 20 mg | 300 W Xe lamp ( nm), visible light | 7.73% | at 420 nm | [87] [87] |
| g-CN/SnO With 3% Pt as co-catalyst. | 2544 | 10 mg | 300 W Xe lamp ( nm) | 9.63% | at 420 nm | [88] [88] |
Table 6.
| Photocatalyst | H evolution rate | Catalyst amount | Light source | Wavelength | AQY | Reference |
| MnWO/g-CN; With 0.5% Pt co-catalyst | 2820.2 | 50 mg | 200 W Xe lamp | nm; visible light | 16.51% at 400 nm | [89] [89] |
| BiTaO / OR-g-CN; With 3% Pt co-catalyst | 4891 | 25 mg | 300 W Xe lamp | nm; visible light | 4.1% at 420 nm | [90] [90] |
| SnNbO/g-CN | 1427.12 | 20 mg | 300 W Xe lamp | nm; visible light | 3.95%, at 365 nm | [91] [91] |
| pg-CN/CdZnSe diethylenetriamine | 12627 | 20 mg | 300 W Xe lamp | nm; visible light | 37.7% at 420 nm | (Chen et al., 2021) [92] |
| Ag/CNU-CNT; 0.3% Pt co-catalyst | 10100 | 10 mg | 500 W metal halide lamp | at 420 nm | 39% | [93] [93] |
| g-CN/BiTiO/ | 56200 | 45 mg | 500 W Xe | 23.1% | (Kumar | |
| BiOI | lamp ( nm) | at 420 nm | et al., 2021) [94] | |||
| g-CN/WO/CdS With 1% Pt co-catalyst | 11658 | 100 mg | 300 W Xe lamp ( nm) | 26.73% at 420 nm | [95] [95] | |
| Pt-g-CN/CdS With 2% Pt co-catalyst | 35,300 | 20 mg | 300 W Xe lamp ( nm) | 24.8% at 420 nm | (J. Wang et al., 2021) [96] | |
| g-CN/CoP | 4752 | 50 mg | 300 W Xe lamp ( nm) visible light | 11.2% | (J. Zhang et al., 2021) [97] | |
| g-CN/CdS | 6.38 | 10 mg | 500 W metal halide lamp | 29.6% | [98] [98] |
Table 7.
Enhancing electrochemical properties by Heteroatom Doping
Heteroatom doping has been an efficient method for the enhancement of defects and thus performance enhancement for a long time. The same is the case with -. Ma et al. using first-principles studies showed that doping of - with nonmetals such as Phosphorus or Sulfur modifies its electrochemical properties, where S atoms substitute for the edge of N atoms, whereas P atoms preferentially situate in the interstitial sites of planar - [99, 100]. Oxygen doping has also been found to improve the photocatalytic activity. The enhanced photocatalytic activity is due to the more adsorption sites and more active sites, the enhanced redox ability and improved electron transport ability, which leads to less recombination and a more efficient separation of photogenerated electron and hole pairs [13, 101]. In all of these cases, it has been observed that the visible light absorption range has increased. Luo et al. observed that the incorporation of in - can switch its semi-conductivity from n-type to p-type due to the acceptor level formed above the valence band by the atoms [102]. Lan et al. synthesized Br modified - via condensation of urea with and observed enhanced optical absorption and photocatalytic activities without the destruction of major architecture of - polymer [103]. Zhu et al. chemically activated - and found that while the functional groups and crystal structure remained intact, the light absorption range was increased due to the introduction of O and H elements into the - framework [104].

Figure 23. Shows that difference in charge density contour maps in planar and part of bond length and corresponding bond overlap population of g-C₃N₄ systems: (a) pure, (b) SN1, (c) PC1, (d) Si, (e) Pi. Gray and blue spheres represent the C and N atoms, respectively. In addition, yellow and purple spheres represent the S and P atoms (impurities), respectively. It was observed that doping of g-C₃N₄ with nonmetals such as Phosphorus or Sulfur modifies its electrochemical properties [105, 106].
Defect engineering to enhance the photocatalytic properties
Dong et al. studied carbon vacancy modified g-C₃N₄ nanosheets and observed that the enhanced efficiency in the photocatalytic NO reduction is due to the carbon vacancies serving as traps for the photogenerated electrons and providing preferential adsorption sites for NO [107]. Whereas Li et al. observed that the nitrogen-deficient g-C₃N₄ has an increased number of active sites for the photocatalytic reaction and it facilitates the efficient separation of photo-generated electrons and holes [108]. Niu et al. observed that the nitrogen deficit g- synthesized via increasing the poly-condensation temperature of dicyanamide showed a slightly narrowed bandgap and extended visible light absorbance between 450 and 600 nm due to the abundant nitrogen vacancy-related states in the band gap [109]. Ruan et al. synthesized g- nanosheets using melamine and urea. They observed that the introduction of urea enhanced the surface area as well as the defects of nitrogen vacancies, which acted as active trap sites in g-, increasing the apparent quantum efficiency (AQE). Photocatalytic materials harness solar energy to generate hydrogen () through the water-splitting process. The efficiency of this photon-to-hydrogen conversion is typically evaluated using the AQE. AQE quantifies the proportion of incident photons that are effectively utilized by the photocatalyst to produce hydrogen. It is calculated based on the measured rate of hydrogen evolution and the flux of incoming photons, using the following formula: to 74% [110].
Heterojunction /Composite Formation
Various composites of g- have been synthesized and studied in order to enhance their photocatalytic activities and optical absorption range. All of them show greater efficiency due to the formation of different types of heterojunctions. Firstly, the composites were made with the previously used photo-catalysts such as ZnO, TiO etc. TiO having a larger UV response range was thought to enhance the charge photogeneration in - [111]. It was observed that the light absorption range was broadened and was from 300-450 nm for the composite. The type II heterojunction formation led to lesser electron hole recombination and greater charge separation efficiency. A type II heterojunction is also referred as staggered band alignment heterojunction, is a junction formed between two semiconductors where the conduction band minimum and valence band maximum of one material are both at higher energy levels than those of the other. This configuration causes photo-generated electrons and holes to separate spatially into different materials, enhancing charge separation and reducing recombination, making it highly beneficial for applications like photocatalysis and solar energy conversion [11, 112]. Similar case happens on combining - with ZnO resulting into formation of a type II heterojunction [113]. Liu et al. studied the efficiency of ZnO/- composite via the photo-oxidation of RhB and photo-reduction of , they found that for 5.0 wt % -, the photooxidation rate constant for RhB was 0.0367 , while it was only 0.0112 for pure and the photoreduction rate constant of was more than five times that observed for pure [114]. / - is also an efficient heterojunction for photodegradation activities [115, 116] Wang et al. synthesized / -/GO with 5.6 wt % / - and found the hydrogen evolution rate was increased to 1.65 from 1.06 for / - indicating that the GO layer helps in efficient collection of electrons in and holes in - [117]. has also been used to synthesize highly efficient composites along with - [118]. The formation of CoP/- and CoO/- hybrids was also studied and it was found that the evolution efficiency increased drastically in both the cases and type II heterojunctions were formed here as well [119, 120]. Ran et al. synthesized 2D/2D van der Waals heterojunction using Phosphorene/g-, this was found to be a type-I heterojunction [121]. g-/graphene composites have also been found efficient in the photodegradation of dyes due to the formation of a Schottky junction between g- and graphene [122, 123]. The SiO/g- heterojunction has shown about 5 (4.18) times higher efficiency that bare g- in the photodegradation of RhB [124]. SnS has also been an efficient compound for heterojunction formation with g-. Di et al. formed a SnS/g- direct Z-scheme heterojunction for CO reduction [125]. Other such composites formed include MnO/monolayer g- (Z-scheme) [126], TaO/g- [127], α-FeO/g-(Z-Scheme) [128], and C/g- (Type I) [129].
g- as Sensors
g- based sensors can be classified broadly into two major types depending upon the sensing mechanism: (a) Fluorescent sensor and (b) Electrochemical sensor.
(a) Fluorescence Sensors:
In case of fluorescence sensors, fluorescent parameters such as intensity, wavelength, anisotropy, or lifetime of the probe change in the presence of the ions to be detected. Generally, fluorescence-based sensors adopt three different strategies: (a) fluorescence quenching (turn-off), (b) fluorescence enhancement (turn-on), and (c) fluorescence resonance energy transfer (FRET) [130]. However, previous sensing probes had major drawbacks such as easy oxidation, toxicity, photobleaching, high cost etc. g- has proved to be a good candidate as a fluorescent sensor since it is non-toxic, non-metallic, readily available and very robust against photobleaching. Synthesis of g- in smaller dimensions such as QDs, nanosheets, nanorods further enhances the sensing efficiency due to increased surface area. g- based sensors have found applications as biosensors as well. Das et al. observed the temperature dependent photoluminescence in g- implying its potential application as low temperature sensors [17]. Shrivanand et al. prepared a highly selective ON-OFF fluorescent sensor based on carboxyl rich g- for the detection of and [131]. The sensors for the detection of a single element or compound can be brought to detect more complex compounds. For example, Rong et al. used g- nanosheets as a fluorescent switch for the detection of Chromium (VI) and further used it for sensing ascorbic acid. The limit of detection for chromium and ascorbic acid were 0.15 and 0.13 respectively [132]. Liu et al. used ratio-metric fluorescence sensing strategy for the detection of and based on the conversion of glucose into through the catalysis of glucose oxidase they further used the sensor for the detection of glucose [133]. Duan et al. synthesized a novel “on-off-on” fluorescent sensor for 6-Thioguanine (LOD = 65 nM) and (LOD = 37 nM) based on g- nanosheets [134]. Zhang et al. synthesized g- nanosheet- sandwich nanocomposite Turn-ON fluorescent sensor for the detection of glutathione (GSH) in aqueous solutions as well as living cells. Under optimum conditions the detection limit of 0.2 for GSH in aqueous solutions was reached [135]. Hu et al. synthesized /g-/HKUST-1(Copper benzene-1,3,5-tricarboxylate) composites for the detection of ochratoxin-A with detection limit of 2.57 ng/mL [136]. Han et al. used FRET based fluorescent sensor for the detection of riboflavin. Using this sensor, riboflavin can be detected from complex systems such as milk [137].
The fluorescent sensing capability of g-CN and its composites also makes it a suitable material for bio-imaging applications. Zhang et al. implied the use of water soluble g-
nanosheets for bioimaging as early as in 2013, due to the biocompatibility, non-toxicity, high stability and good quantum yield [31]. Later on in 2014, another group Zhang et al. used /g- nanosheets for the intracellular imaging of glutathione [135]. Wu et al. used phosphorous doped g- QDs and recorded their bioimaging capabilities by incubating them with the OCM-1 cells as shown in Figure 25 [135].

Figure 25. In vitro and in vivo bio-imaging of P-g-CN QDs. (a) Bright-field microphotograph and (b) fluorescent microphotograph of OCM-1 cells incubated with P-g-CN QDs-3. (c) Bright-field microphotograph of the nude mice tumor. (d) Photoacoustic image of tumor-bearing mice incubated with P-g-CN QDs-3. (e) Bright-field and photoacoustic image of tumor-bearing mice incubated with P-g-CN QDs-3. Yellow circles highlight the tumor site. Photoacoustic images of mice (f) 4, (g) 12, and (h) 24 h after the intratumoral injection of P-g-CN QDs-3 (100 L, 0.1 mg mL) [18].
| Target Analyte | Sensor Type | Material | Detection Limit | Sample Application | Reference |
| Various | Ratiometric (ECL, FL, PEC) | g- composites | As low as 59 aM (RdRp gene) | Biosensing, food, environment | Xu, 2025 [138] |
| Organophosphorus pesticides | Fluorescence + Colorimetric | decorated g- NS | 6.8 nM (FL); 1.2 nM (Colorimetric) | Cabbage, Tap Water | Chen, 2021 [139] |
| Chlortetracycline | Fluorescence (turn-on, AIE) | Citrate-modified g- nanodots | 13 nM | Chicken, feed, cells | Y. X. Wu, 2024 [140] |
| Carboxin | Chemiluminescence | g- Quantum Dots | Not specified | Water | Y. Zhou, 2024 [141] |
| Fluorescence (turn-off) | Chitosan-modified g- | 9 nM | Aqueous | Z. Li, 2024 [142] | |
| , , , etc. | Electrochemical | g- nanocomposites | Depends on method | Aqueous environment | Yin, 2025 [143] |
| O2, Temp | Photoluminescence | g- (urea and melamine based) | Not specified | Environmental monitoring | Kokkotos, 2025 [144] |
Table 2. Table-2 Use of g- as sensing material for various analyte.
| Fluorescent aptasensor (FRET) | g-C3N4 nanosheets + AuNPs + Aptamer | 0.8 μg/mL | Environmental samples | L. Jia, 2025 [145] | |
| Glutathione (GSH) | Ratiometric Fluorescence | g-C3N4 NSs + Ag NCs | 0.157 μM | Serum, tablets, cells | Sun, 2025 [146] |
| Fluorescence quenching + Colorimetric | W-doped g-C3N4 | 8 nM (FL), 20 nM (Colorimetric) | Biological/General | Ahmed, 2021 [147] | |
| , Glucose | Ratiometric Fluorescence | g-C3N4 NS + CuNCs + Ce3+ | 0.6 μM (), 0.48 μM (Glucose) | Milk, Serum | Mei, 2022 [148] |
| Chloride ions | Potentiometric | g-C3N4/AgCl nanocomposite | 0.4 μM | Water samples | Alizadeh, 2022 [149] |
| Histamine | Fluorescence (quenching) | g-C3N4 (KCl/NaCl assisted) | 0.61 mg/kg | Fish | Lin, 2022 [150] |
| Procalcitonin (PCT) | Electrochemical (non-enzymatic) | g-C3N4 NS + peptide | 0.11 fg/mL | Serum | Liu, 2022 [151] |
Table 8 (PDF p. 42).
Electrochemical Sensor
The next type of sensor is the electrochemical sensor which also includes the photoelectrochemical sensors as well. The electrochemical sensors are further of two types: static and dynamic. Static sensors are used when there is no stream flow between the electrodes and the analyte and the sensing is governed by diffusion and Brownian motion. The dynamic sensors on the other hand are characterized by the current flow between the electrodes and the analyte as a result of redox reactions going on [152].
Photoelectrochemical sensing refers to the influence of the interaction between the recognition element and the analyte on the photocurrent signal, which involves the charge and energy transfer of the PEC reaction between the electron donor /acceptor and the photoactive material upon light irradiation. N-doped carbons have received considerable attention due to the strong electron donor nature of nitrogen which enhances the collective -bonding, leading to the improved stability, electron transfer rate and hence durability of the carbon supports during electrocatalytic processes [153]. Zhou et al. synthesized chemically modulated g- by exfoliating bulk carbon nitride (CN) of different polymerization degrees and developed highly selective ECL sensors for rapid detection of multiple metal-ions such as , and . Electrochemiluminescence is a special form of chemiluminescence in which the light-emitting chemiluminescent reaction is preceded by an electrochemical reaction [154]. Raj kumar et al. used sulfur doped g- as electrode for electrochemical sensing of 4-Nitrophenol. They obtained a wide linear response range from 0.05–90 M and a relatively low detection limit (0.0016 M) [155]. Zou et al. used sulfur doped g- on glassy carbon electrode for lead ion () sensing application [156]. Zhang et al. synthesized ultrathin g- modified glassy carbon electrode for detection having a detection limit of 0.023 g/L (S/N = 3) [157]. Cao et al. synthesized /g- nanocomposites via calcination method for high performance ethanol gas sensors. The high surface area (132.5 ) of the composite made it even more efficient [158]. Zhai et al. used /g- composite for UV light assisted ethanol gas sensing [159] whereas Zhang et al. synthesized -/g- composite for ethanol sensing [160]. Hang et al. synthesized graphene/g- for sensing [161].
In case of biosensors as well, there has been a significant amount of g-CN composites for the detection of multiple elements. Dong et al. synthesized a dual-electrodes array modified by CdS@g-CN p-n junction heterojunction for detecting prostate specific antigen (PSA). Here, the sensor was a photoelectrochemical sensor [162]. Tian et al. used just g-CN nanosheets as a highly efficient electrocatalyst for the reduction of HO and further for glucose sensing. The sensor had a detection limit of 45 M (SNR = 3) [163]. Lv et al. synthesized 0-dimensional/ 2-dimensional (0D/2D) CQD/g-CN nano-heterostructures for the sensitive photoelectrochemical (PEC) immunoassay of cancer-related biomarkers (prostate-specific antigen (PSA)) coupling with the copper nanoclusters (CuNCs). The PCE had a dynamic linear range of 0.02 – 100 ng mL and a limit of detection (LOD) of 5.0 pg mL [164]. Zou et al. used 2D g-CN/CuO nanocomposites for dopamine detection. The response of the sensor was linear over the range of 2.0010 to 7.1110 mol L with a detection limit of 1.0010 mol L [165]. Liu et al. developed a photoelectrochemical sensor for the detection of adenosine using CdS/PPy/g-CN nanocomposites (PPy- polypyrrole for more efficient charge separation). Under optimal conditions, the PEC aptasensor had a sensitive response to adenosine in a linear range of 0.3 nmolL to 200 nmolL with a detection limit of 0.1 nmolL [166]. Liu et al. synthesized an enzyme (glucose oxidase) biosensor under visible light irradiation using TiO nanosheet/g-CN nanocomposite. This photoelectrochemical sensor (PCE) had a linear range of 0.005-16 mM and a 0.01 mM glucose detection limit [167]. Cao et al. detected glycophosate using photoelectrochemical sensor based on Cu-BTC MOF/g-CN nanosheet (BTC-benzene-1,3,5-tricarboxylic acid) schematically as shown in Figure 26. It had a low detection limit of mol L and a wide detection range ( - mol L and ~ mol L) [168].

Figure 26. The analytical principle of Cu-BTC/CN-NS based electrochemical sensor [168].
Li-ion Storage
Batteries are something that has found applications in our day to day life with Li ion batteries being one of the most common rechargeable batteries. Graphene or its derivatives have been extensively used as anode material for Li-ion batteries due to their high conductivity and good chemical stability [169]. Here, we will be getting into the application of g-CN composites as electrode material for Li ion storage. In 2014, Hou et al. reported the use of N-doped graphene/porous g-CN nanosheets supporting layered-MoS hybrid as a potential Li-ion battery anode. The hybrid nanosheets exhibit superior electrochemical performance, including excellent cycling stability (maintaining 91% capacity after 100 cycles), a high rate capability (retaining 83% capacity from 50 mA g to 500 mAg), and a considerably large capacity (achieving more than 800 mAhg at 100 mAg) [170]. Li et al., in the next year synthesized ZnGeO/g-CN hybrids via facile solution approach. They observed that the 2D g-CN layers effectively accommodated the volume changes and prevented the formation of unstable solid electrolyte interface (SEI), while monodisperse ZnGeO NPs prevented the ultrathin g-CN layers from restacking, promoted lithiation/ delithiation kinetics and contributed to the high specific capacities. Figure 27 shows illustration of pure g-CN and ZnGeO/g-CN hybrids for Li-insertion viewed from the a,c edge and b,d basal plan directions. The composites exhibited a high charge capacity of 1370 mA h g at 200 mA g after 140 cycles and an excellent rate performance of 950 mA h g at 1000 mAg. [171]. Vo et al. used hydrothermal method to produce SnO/g-CN nanocomposites and observed that the nanocomposite showed an improved cycling performance as compared to the SnO alone [172]. Huu et al. recently used MoS/g-CN composite and studied their properties as anode material for Li storage. They observed that the composite had high capacity and stable cycling performance at 1 C (Ag) with a reversible capacity of 1204 mAhg for 200 cycles. This was due to the role of g-CN as a supporting material for the accommodation of volume change and improved charge transport [19]. Liu et al. in the same year, synthesized LiTiO/g-CN composite. The composite showed excellent cycling stability with a maintained discharge capacity of 150.8 mAh/g at 0.5 C even after 502 cycles, corresponding to only 0.026 % capacity loss per cycle [173].

Figure 27. Illustrations of pure a,b) g-C₃N₄ and c,d) Zn₂GeO₄/g-C₃N₄ hybrids for Li-insertion viewed from the a,c) edge and b,d) basal plan directions [171].
| Sl. No. | material | Electrolyte | Initial Capacity (mAhg⁻¹) | Rate | Reversible capacity (mAhg⁻¹) | No of cycles | Reference |
| 1 | C₃N₄/NRGO/MoS₂ hybrid nanosheets | 1.0M LiPF₆ in ethylene carbonate/ethyl methyl carbonate (40:60 v/v) | 938 mAh g⁻¹ | 100 mA g⁻¹ | 855 | 100 | Hou et al. [170] [170] |
| 2 | ZnGeO /g-CN | 1 M LiPF in a mixture of ethylene carbonate (EC) and dimethyl carbonate (DMC) (v/v = 1:1). | 1370 mA h g | 200 mA g | 1304 | 100 | Li et al. (2015) [171] |
| 3 | SnO nanosheets/g-CN | 1 M LiPF in ethylene carbonate (EC): ethyl diethyl carbonate (DEC): dimethyl carbonate(DMC) (3:3:4 volume ratio) | 733 | - | - | 60 | Vo et al. (2017) [172] |
| 4 | MoS/g-CN | 1 M LiPF in ethylene carbonate:ethyl diethyl carbonate:dimethyl carbonate (3:3:4 volume ratio) | 2467 | 1C | 1204 | 200 | Huu et al. [19] [19] |
| 5 | LiTiO/g-CN | 1 M LiPF/ethyl methyl carbonate (EMC) + ethylene carbonate (EC) + dimethyl carbonate (DMC) (1:1:1 in volume) solution | 173.7 | - | 150.8 | 502 | Liu et al. (2018) [173] |
| 6 | Layered g-CN@Reduced Graphene Oxide | ethylene carbonate and dimethyl carbonate mixture (1:1) | 1476.1 mA h g | 595.1 mA h g | 949.4 mA h g | 50 | Wang et al. [174] |
| 7 | SnS/g-CN/graphite | fluoro ethylenecarbona | 536.5 mA h | - | 470 mA h g | 30 | Zuo et al. [175] |
Table 03. Use of graphitic carbon-nitride for Li-ion batteries
| 8 | LiMnNiCoO @g-CN | - | 207.7 | 1C | 163.6 | 300 | F.-F. Wang et al. [176] [176] |
| 9 | Graphitic carbon nitride | LiPSCl (LPSC). | 760 | 0.2C | 579 | 150 | Y. Zhao et al. (2024) [177] |
| 10 | Porous activated carbon integrated carbon nitride nanosheets a | 1 M LiTFSI | 1389 | 0.1C | 655 | 500 | J. Joseph et al. [178] [178] |
| 11 | N and P dual-doped hollow carbon fibers/graphitic carbon nitride | 1 M LiPF in ethylene carbonate (EC)/dimethyl carbonate (DMC)/ethyl methyl carbonate with a volume ratio of 1:1:1. | 1199 | 1 A g | 1030 | 1000 | H. Tao et al. [179] [179] |
| 12 | CuCo carbonate hydroxide nanowires/graphitic carbon nitride composites | 1 M LiPF in a mixture of ethylene carbonate (EC)/dimethyl carbonate (DMC) (EC/DMC; 1:1 M ratio) | 1373 | 100 mA g | 394 | 100 | M.R. Raj et al. [180] [180] |
caption:
:::
Supercapacitors
g-CN has been a strong potential candidate for supercapacitors. This is due to its high nitrogen content which provides it with more active reaction sites, increased electron donor/acceptor characteristics, enhanced charge transfer efficiency and large pseudo capacitance. Shi et al. reported Ni(OH) hybridized g-CN had a specific capacitance of 505.6 F/g at a current density of 0.5A/g which was higher than that of pure [181]. Dong et al. also used /g- composite which exhibited higher specific capacities (1768.7 F/g at 7 A/g, 2667 F/g at 3 mV s, respectively) compared to aggregations (968.9 F/g at 7 A/g) and g- (416.5 F/g at 7 A/g), as well as better cycling performance ( 84% retentions after 4000 cycles) [182]. Guo et al. prepared high-performance electrode material for supercapacitors using porous g- nanosheets/ nanoparticles. The electrochemical characterizations showed that the as-prepared hybrid composite delivers excellent electrochemical properties, exhibiting a high capacitance (1557 F/g at current density of 1 A/g) and excellent cycling stability (only 7.4 % loss after 10000 cycles). This was attributed to the uniform distribution of on the surface of porous g- and functioning as conductive linkers between g- nanosheets, which ultimately improve the electrical conductivity of the hybrid composite for supercapacitor electrode [183]. Chen et al., synthesized PEDOT/g- (PEDOT: poly (3,4-ethylenedioxythiophene): poly (styrenesulfonate)) as binary electrode material for supercapacitors. The specific capacitance of the composite was found to be 137 F/g in and 200 F/g in at a current density of 2 A/g, respectively. Also more than 89 % and 96.5 % of capacitance were retained in and respectively [184]. Chang et al. used sandwich-like /g- nanocomposite electrode for supercapacitor. The composite enhanced the supercapacitor performance exhibiting high specific capacitance of 211 F/g at a current density of 1 A/g, with good rate capacity and cycling stability [20]. Dong et al. used g-/PPy (polypyrrole) nanocomposites as electrode material. The obtained nanocomposite exhibited large specific surface area and high specific capacitance, cyclic reliability and rate capability characteristics. The specific capacitance reached 471 F/g at current density of 1 A/g, remaining % of its original value with cycling up to 1000 times or at the current density of 20 A/g [185]. Sun et al. further synthesized MnO/g-CN and PPy (polypyrrole) composite and noted that the composite exhibited a high specific capacitance of 274 F/g at a current density of 2 A/g, which was 1.88 times than that of the MnO@PPy nanocomposite when used as electrodes. The MnO/g-CN@PPy nanocomposite electrode also possessed outstanding cyclic stability with 95 % capacitance retention after 1000 cycles [186]. Raghupathi et al. used g-CN doped MnS as electrode material and observed that the existence of spherical morphology and the lone pair of electron present in the graphitic carbon nitride improved the conductivity as well as supercapacitive behavior of the material leading to high specific capacitance of 463.32 F/g at 10 mV/s and 248 F/g at 1 A/g. The capacity retention of 98.6 % was observed after 2000 cycles [187]. Sanati et al. reported the high capacitance and cyclic stability of CoAl-layered double hydroxide (CoAl-LDH) nanoflowers decorated with g-CN nanosheets as an electrode material for supercapacitor applications. They demonstrated that adding various amounts of g-CN nanosheets to the LDHs promotes its electrochemical properties by combining the redox reactivity of the LDH host with the considerable electronic conductivity of the g-CN. The nanocomposite presented a high specific capacitance of (343.3 F/g) at 5 A/g and presented 93% of its initial capacitance after 6000 cycles [188]. Warsi et al. investigated g-CN/CdSnO as an electrode material for supercapacitor applications [189]. In a three-electrode configuration using 0.1 M HSO as the electrolyte, the g-CN/CdSnO (synthesized at 500 °C for 2 hours) electrode exhibited a high specific capacitance of 601 Fg at a current density of 0.5 . The material also demonstrated excellent cycling stability, retaining 94.69 % of its initial capacitance after 5000 charge–discharge cycles at 5.0 . In a two-electrode setup, electrochemical analysis revealed a maximum specific capacitance of 351.45 , along with a power density of 250 at an energy density of 48.81 , indicating strong potential for energy storage applications. Recently, in 2025 P. Chaluvachar et al. have presented a review on emerging role of graphitic carbon nitride in advanced supercapacitors [190].
| S. No. | Material | Synthesis route | Current density () | Specific capacitance () | Electrolyte | Energy density () | Power density () | Capacitance Retention | Reference |
| 1 | g-C3N4/Ni(OH)2 | Hydrothermal | 0.5 | 505.6 | 6M KOH | 17.5 | 125.43 | 71.5% after 1000 cycles | Shi et al [181] [181] |
| 2 | g-C3N4/Ni(OH)2 | - | 7 | 1768.7 | 6M KOH | 43.1 | 9126 | 72% after 8000 cycles | Dong et al. (2017) [182] |
| 3 | g-C3N4 nanosheets | multistep thermal treatment process | 1 | 1557 | 6M KOH | - | - | 92.6% after 10000 cycles | Guo et al. [183] [183] |
| 4 | PEDOT/g-C3N4 | layer-by-layer assembly | 2 | 137 | H2SO4 | 17.5 | 5000 | 89% after 1000 | Chen et al. (2015) |
| method | cycles | [184] | |||||||
| 5 | MnO2/g-C3N4 nanocomposite | soft chemical route at low temperature. | 1 | 211 | 0.5 M Na2SO4 | - | - | 100% after 1000 cycles | Chang et al. [20] [20] |
| 6 | C3N4/PPy (polypyrrole) nanocomposites | chemical oxidation method 6M KOH | 1 | 471 | 6M KOH | 23.7 | 1400 | >80% after 1000 cycles | Dong et al. [185] [185] |
| 7 | MnO2/g-C3N4@polypyrrole (PPy) ternary nanocomposite | facile soft chemical routes | 2 | 274 | 0.5 M Na2SO4 | - | - | 95% after 1000 cycles | Sun et al. [193] [186] |
| 8 | g-C3N4 doped MnS | sol-gel technique | 1 | 248 | 1 M Na2SO4 | - | - | 98.6% after 2000 cycles | Raghupathi et al. (2019) [187] |
| 9 | CoAl-LDH/g-C3N4 nanosheet composite | solvothermal method | 5 | 343.3 | 2M KOH | 61.15 | 1399 4.66 | 93% after 6000 cycles | Sanati et al. [188] [188] |
| 10 | g-C3N4/Cd2SnO4 | mechanochemistry procedure | 0.5 | 601.20 | 0.1 M H2SO4 | 48.81 | 250 | 94.69% after 5000 cycles | Warsi et al. (2025) [189] |
Table 4. Comparative analysis of graphitic carbon-nitride based supercapacitors
Electronic Devices
- having its band-gap in the visible range and its tenability with doping, defect engineering or capability to form heterojunction is one of the suitable materials for electronic devices. In addition to these, robust & non-metallic nature and large light absorbing capabilities makes - as preferred material for electronic devices. Zhao et al. studied the photogenerated charge separation of -/ hybrid and found that due to the built-in electric field effect, the charge separation in -/ increased drastically [112]. Liu Hongji et al. [191] described a kind of metal-free multipurpose platform for NIR (808 nm) imaging-guided combination photo-chemotherapy made of - QDs embedded in carbon nanosheets (CNQD-CN) [191]. Zhou et al. on the other hand showed that the graphitic carbon nitride quantum dots CNQDs in the exposure 150 W of Xe lamp, underwent photodoping and turned from an insulator into a photoconductor. The photocurrent of the CNQDs photoconductor was already profound compared to the dark current, rapidly photo responsive in several seconds and highly reproducible by periodical light on and off. They deposited robust CNQDs film on a gold interdigital electrode with adjacent intervals of about 150 m [192]. Sun et al. studied the photoelectrochemical behavior of -// and observed that the photocurrent of the -// heterojunction photoconductor was profound compared to the dark current, having a rapid photo response time of several micro-seconds. The significantly highest photocurrent in the composite suggesting that the ternary heterojunctions have lowest recombination rate and most efficient charge separation [193]. Ye et al. fabricated /S-doped - heterojunction film which offered an enhanced anodic photocurrent of as high as A/cm at an applied potential of +0.5 V vs under the visible light irradiation [194]. Lai et al. in the same year reported nanosheet/Graphene as hybrid phototransistors. These hybrid devices showed a high responsivity of the order and a gain of under UV illumination. The schematic of this device is shown in Figure 28(a) and the transfer characteristic curve is shown in Figure 28(b). This enormous photo response of the hybrid device was related to an efficient charge transfer from nanosheets to graphene [195]. Velusamy et al. made a flexible organic/inorganic 2D photodetectors with tunable composition and photodetection properties. The photodetectors showed broadband photodetection suitable for both the UV and visible spectrum with good responsivity, specific detectivity and reliable and rapid photo-switching characteristics [196]. Prakash et al. developed a multifunctional hybrid photodetector based on -Si heterojunction. The built-in field at the – junction allowed the device to operate over ultrabroadband region from 250 to 1650 nm in self-powered mode. The device shows a novel binary photo switching in response to OFF/ON light illumination at small forward bias ( V) covering 250–1350 nm. At zero bias, the device displays an extremely high ON/OFF ratio of under 680 nm () illumination. The device also showed an ultrasensitive behavior over the entire operating range at low light illuminations with highest responsivity (), detectivity ( Jones), and external quantum efficiency (213 %) at 680 nm [197].

Figure 28. a) Schematic diagram of the device based on g-CN and graphene. b) Transfer curves of the device at excitation wavelength is 370 nm under different light intensities having applied of 0.5 V [195].
| Sl. No. | Active Materials | Growth Technique | Excitation wavelength | Responsivity (A/W) | EQE (%) | References |
| 1. | g-CN /graphene | Thermal condensation | 370 nm | - | Lai Sin Ki, et al., 2016 [195] | |
| 2. | g-CN /Si | Drop-casting | 680 | 1.2 | 213 % | Prakash Nisha, et al., 2018 [197] |
| 3. | g-CN /MoS | Liquid Phase Exfoliation | 365 and 532 nm | 4 | - | Velusamy, Dhinesh Babu, et al., 2019 [198] |
| 4. | Au-g-CN /CdS/ZnO | Pyrolysis | 530 nm | - | - | S. Pal et al., 2018 [199] |
| 5. | g-CN /N-doped graphene | Polymerization | 365 nm and 488 nm | 0.59 mA/W and 30 A/W | - | X. Gan et al., 2018 [200] |
Table 5. Summary of performance parameters of g-CN based hybrid photodetectors.
| 6. | CNT/ g- nanosheets | spin coating method | 365 nm | 0.23 | 0.01-10 % | H. Fang et al., 2020 [201] |
| 7. | g-/GaN | Hydrothermal treatment | 360-635 nm | 3 | K. Sarkar et al., 2021 [202] | |
| 8. | H-gCN (hydrogen substituted g-) 2D sheets | Spin-coated | 350-1100 nm | 0.34 | 59 | A. Ghosh et al., 2021 [203] |
| 9. | g-/Bi | Ultrasonication | 300–800 nm | - | Y. Zhang et al., 2021 [204] | |
| 10. | g-/GaN nanowires | Spin-coated | 392 nm | 0.02 | - | M. Reddeppa et al., 2021 [205] |
| 11. | g- film | Vapor Phase Transport | 355 | % | Z. Liu et al. 2021 [206] | |
| 12. | Ag/MWCNT / g- nanosheets | Solution process | 534 nm | 0.9 A/W | 151 % | S. V. Manikandan et al., 2022 [207] |
| 13. | g-CN/Si | Vapor-phase transport-assisted condensation method | 515 nm | 133 | - | X. Chen et al., 2023 [208] |
| 14. | Sulfur-doped g-/GaN | Calcination process | 365 nm | 581 mA/W | 3.75 % | W. Song et al., 2024 [209] |
| 15. | g-/SnSe/H-TiO | Impregnation and CVD | 370, 450, 520 nm | 2.742 A W | % | X. Zhao et al., 2024 [210] |
| 16. | g-/CdS- | Spin coated | 2.16 µW/c | 0.39 | - | K. N. Das |
| S. No. | Structure | Method | Wavelength | Reference | ||
| 17. | V4C3Tx MXene/protonated g-CN | Spin Coating | 365 nm | - | - | P. M. A. Kenichi, et al. 2025 [212] |
| 18. | g-CN | Calcination | 360 nm | 17.6 | 60.5 | S. Kumari et al., 2025 [213] |
| 19. | g-CN/p-Si | Drop-casting | 405 | 32 | R. K. Prasad et al. 2025 [214] |
Table 9.
Table -6 Recently improved photovoltaic solar cells performance based on g-CN.
| S. No. | Structure | PCE (%) | FF (%) | J (mA .cm) | V (V) | Reference |
| 1. | g-CN added carbon | 14.34 | 60.1 | 23.80 | 1.00 | Yang, Zong Lin, et al., 2019 [215] |
| 2. | FTO/compact TiO/exfoliated g-CN modified MAPbI/spiro-OMeTAD/Au | 15.80 | 62 | 23.2 | 1.1 | Wei Xiang feng, et al., 2019 [216] |
| 3. | Iodine doped g-CN | 17.53 | 73 | 22.63 | 1.06 | Cao Wei, et al., 2019 [217] |
| 4. | FTO/TiO/ g-CN | 19.49 | 74 | 24.31 | 1.07 | Jiang Lu Lu, et |
| al., 2018 [218] | ||||||
| 5. | Perovskite / | 18.09 | 75.96 | 22.47 | 1.06; Li Zhen, et al., 2020 [219] | |
| 6. | 2D | 19.67 | 80.7 | 21.45 | 1.14; Liu Zhou, et al., 2020 [220] | |
| 7. | FTO/compact / | 21.1 | 79 | 23 | 1.16; Liao Jin Feng, et al., 2019 [221] | |
| 8. | QDs | 21.23 | 80.7 | 21.45 | 1.14; Liu Pei, et al., 2020 [222] | |
| 9. | QDs doped | 22.13 | 78.3 | 24.03 | 1.18; Chen Jinbo, et al., 2020 [223] |
Table -6. Recently improved photovoltaic solar cells performance based on g-CN.
Future Outlook
Due to versatile physicochemical properties and numerous applications, graphitic carbon nitride () holds strong potential for application in future generation devices. It’s one of the important materials of interest being metal free 2-dimensional semiconductor having high thermal stability, tunable bandgap ( eV) and biocompatibility. Additionally, being cost-effective material it has attracted researchers and industries working in the domain of sensors, energy storage and environmental remediation. In spite of reported number of techniques for synthesis of , method to synthesize with controlled stoichiometric ratio and defined phase lacks in the literature. The stoichiometric ratio, phase and defect density controls its physical and chemical properties limiting its potential application. There has been ongoing efforts to dope it with various dopants like phosphorous, zinc, cobalt, nickel, gold, silver and magnetism to tailor its electronic, optical and photocatalytic properties.
has been found to play transformative role in the domain of sensors. Its surface chemistry and electronic structure can be tailored for high sensitivity and specificity, which is crucial for detecting a wide range of optical, biological and chemical analytes. Recent research activities are focussed to enhance its conductivity and signal amplification through strategies such as heterojunction formation, defect engineering and doping. These modifications could significantly improve its performance in electrochemical and fluorescence-based sensors for medical diagnostics, environmental monitoring and food safety applications.
Environmental remediation is another crucial area where shows immense potential. Its photocatalytic activity under visible light enables the degradation of pollutants, including pharmaceuticals, dyes and organic waste in water. There lies a great scope to further enhance its photocatalytic performance through composite formation with materials such as , , reduced graphene oxide (rGO) and through introduction of dopants. Composite formation and introduction of dopants is expected to enhance the separation efficiency of photo generated charge carriers. These enhancements could enable based decentralized, solar-powered water purification systems.
For energy storage applications, is being explored as a catalyst for water splitting and reduction. It processes required properties for clean hydrogen production and carbon mitigation. Structural modifications such as the integration of transition metals or co-catalysts, can further improve catalytic efficiency and stability. These advancements indicate towards future possibility of application of to realize green hydrogen generation and carbon-neutral fuel technologies.
Membrane technologies also stand to benefit from the integration of . Its incorporation into polymeric matrices enhances the selectivity and mechanical strength of membranes used in ultrafiltration, oil-water separation and gas separation. Compared to traditional nanofillers, offers better dispersion in organic matrices and superior environmental compatibility. The next phase of research are likely to focus on multifunctional membranes that combine separation, catalysis and disinfection properties, offering a holistic solution to complex industrial and municipal wastewater challenges.
In the realm of fuel cells and energy storage, is gaining traction as a support material or even as a co-catalyst in direct methanol fuel cells (DMFCs). When combined with non-noble metals like palladium or iron, it enhances methanol oxidation reactions while resisting CO poisoning, a major limitation in conventional platinum-based systems. Furthermore, its high surface area and chemical tunability makes it suitable for developing high-performance supercapacitors and lithium-sulphur batteries.
Beyond these applications, holds potential as a catalyst in organic synthesis and Fenton-like reactions. Its basic sites and ability to activate hydrogen peroxide makes it useful for green catalytic processes. These emerging applications highlight the adaptability of across diverse chemical transformations, further underscoring its importance in future sustainable technologies.
In conclusion, the multifaceted capabilities of position it as a cornerstone in the development of next-generation technologies for clean energy, environmental protection and advanced sensing. Overcoming current limitations, such as poor charge mobility and limited surface area, through innovative material engineering will be essential for unlocking its full potential. As research continues to evolve, is set to become a key player in the global pursuit of sustainable and intelligent materials.
Acknowledgment
Dilip K. Singh thanks UGC-DAE CSR Indore (CRS/2021-22/01/358) and DST, Government of India (CRG/2021/002179; CRG/2021/003705; CRG/2023/002324) for financial support.
Declaration of competing interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
References
- [1]K.S. Novoselov, A.K. Geim, S.V. Morozov, D.-e. Jiang, Y. Zhang, S.V. Dubonos, I.V. Grigorieva, A.A. Firsov, Electric field effect in atomically thin carbon films. science, 306 (2004) 666-669.
- [2]D.S. Schulman, A.J. Arnold, S. Das, Contact engineering for 2D materials and devices. Chemical Society Reviews, 47 (2018) 3037-3058.DOI
- [3]V. Meunier, A. Souza Filho, E. Barros, M. Dresselhaus, Physical properties of low-dimensional sp²-based carbon nanostructures. Reviews of Modern Physics, 88 (2016) 025005.DOI
- [4]M. Borah, D.K. Singh, K.M. Subhedar, S.R. Dhakate, The role of substrate purity and its crystallographic orientation in the defect density of chemical vapor deposition grown monolayer graphene. RSC Advances, 5 (2015) 69110-69118.
- [5]R. Kumar, S. Yoon, K. Lee, P. Pal, R. Pant, C. Suman, S. Dhakate, R. Kumar, D.K. Avasthi, D.K. Singh, Purification method dependent fluorescence from nitrogen-vacancy (NV) centers of nano-diamonds. RSC advances, 6 (2016) 47164-47173.DOI
- [6]X. Li, M. Rui, J. Song, Z. Shen, H. Zeng, Carbon and graphene quantum dots for optoelectronic and energy devices: a review. Advanced Functional Materials, 25 (2015) 4929-4947.DOI
- [7]C.-F. Liu, Y.-C. Liu, T.-Y. Yi, C.-C. Hu, Carbon materials for high-voltage supercapacitors. Carbon, 145 (2019) 529-548.
- [8]A. Thomas, A. Fischer, F. Goettmann, M. Antonietti, J.-O. Müller, R. Schlögl, J.M. Carlsson, Graphitic carbon nitride materials: variation of structure and morphology and their use as metal-free catalysts. Journal of Materials Chemistry, 18 (2008) 4893-4908.
- [9]J.v. Liebig, About some nitrogen compounds. Ann. Pharm, 10 (1834) 10.
- [10]Y. Wang, X. Wang, M. Antonietti, Polymeric graphitic carbon nitride as a heterogeneous organocatalyst: from photochemistry to multipurpose catalysis to sustainable chemistry. Angewandte Chemie International Edition, 51 (2012) 68-89.
- [11]J. Zhang, B. Tian, L. Wang, M. Xing, J. Lei, J. Zhang, B. Tian, L. Wang, M. Xing, J. Lei, The Preparation and Applications of gC 3 N 4/TiO 2 Heterojunction Catalysts. Photocatalysis: Fundamentals, Materials and Applications, (2018) 173-196.
- [12]D. Zheng, G. Zhang, Y. Hou, X. Wang, Layering MoS2 on soft hollow g-C3N4 nanostructures for photocatalytic hydrogen evolution. Applied Catalysis A: General, 521 (2016) 2-8.DOI
- [13]G. Liu, P. Niu, C. Sun, S.C. Smith, Z. Chen, G.Q. Lu, H.-M. Cheng, Unique electronic structure induced high photoreactivity of sulfur-doped graphitic C3N4. Journal of the American Chemical Society, 132 (2010) 11642-11648.DOI
- [14]L. Chen, D. Huang, S. Ren, T. Dong, Y. Chi, G. Chen, Preparation of graphite-like carbon nitride nanoflake film with strong fluorescent and electrochemiluminescent activity. Nanoscale, 5 (2013) 225-230.DOI
- [15]X. Chen, R. Shi, Q. Chen, Z. Zhang, W. Jiang, Y. Zhu, T. Zhang, Three-dimensional porous g-C3N4 for highly efficient photocatalytic overall water splitting. Nano Energy, 59 (2019) 644-650.DOI
- [16]E.Z. Lee, Y.S. Jun, W.H. Hong, A. Thomas, M.M. Jin, Cubic mesoporous graphitic carbon (IV) nitride: An all-in-one chemosensor for selective optical sensing of metal ions. Angewandte Chemie, 122 (2010) 9900-9904.DOI
- [17]D. Das, S. Shinde, K. Nanda, Temperature-dependent photoluminescence of g-C3N4: implication for temperature sensing. ACS applied materials & interfaces, 8 (2016) 2181-2186.
- [18]J. Wu, S. Yang, J. Li, Y. Yang, G. Wang, X. Bu, P. He, J. Sun, J. Yang, Y. Deng, Electron injection of phosphorus doped g-C3N4 quantum dots: controllable photoluminescence emission wavelength in the whole visible light range with high quantum yield. Advanced Optical Materials, 4 (2016) 2095-2101.DOI
- [19]H. Tran Huu, X.D. Nguyen Thi, K. Nguyen Van, S.J. Kim, V. Vo, A facile synthesis of MoS2/g-C3N4 composite as an anode material with improved lithium storage capacity. Materials, 12 (2019) 1730.DOI
- [20]X. Chang, X. Zhai, S. Sun, D. Gu, L. Dong, Y. Yin, Y. Zhu, MnO2/g-C3N4 nanocomposite with highly enhanced supercapacitor performance. Nanotechnology, 28 (2017) 135705.
- [21]E. Kroke, M. Schwarz, E. Horath-Bordon, P. Kroll, B. Noll, A.D. Norman, Tri-s-triazine derivatives. Part I. From trichloro-tri-s-triazine to graphitic C 3 N 4 structures. New Journal of Chemistry, 26 (2002) 508-512.
- [22]X. Wang, S. Blechert, M. Antonietti, Polymeric graphitic carbon nitride for heterogeneous photocatalysis. Acs Catalysis, 2 (2012) 1596-1606.
- [23]P. Praus, L. Svoboda, M. Ritz, I. Troppová, M. Šihor, K. Kočí, Graphitic carbon nitride: Synthesis, characterization and photocatalytic decomposition of nitrous oxide. Materials Chemistry and Physics, 193 (2017) 438-446.DOI
- [24]J. Liu, T. Zhang, Z. Wang, G. Dawson, W. Chen, Simple pyrolysis of urea into graphitic carbon nitride with recyclable adsorption and photocatalytic activity. Journal of Materials Chemistry, 21 (2011) 14398-14401.DOI
- [25]I. Papailias, T. Giannakopoulou, N. Todorova, D. Demotikalli, T. Vaimakis, C. Trapalis, Effect of processing temperature on structure and photocatalytic properties of g-C3N4. Applied Surface Science, 358 (2015) 278-286.DOI
- [26]I. TANAKA, T. NISHIMIYA, G. OHGITA, Y. HARADA, Preparation of carbon nitride films from g-C3N4 by ion-beam-assisted deposition. Mechanical Engineering Journal, 6 (2019) 18-00547-00518-00547.DOI
- [27]J. Feng, T. Chen, S. Liu, Q. Zhou, Y. Ren, Y. Lv, Z. Fan, Improvement of g-C3N4 photocatalytic properties using the Hummers method. Journal of colloid and interface science, 479 (2016) 1-6.DOI
- [28]R.C. Pawar, S. Kang, J.H. Park, J.-h. Kim, S. Ahn, C.S. Lee, Room-temperature synthesis of nanoporous 1D microrods of graphitic carbon nitride (g-C3N4) with highly enhanced photocatalytic activity and stability. Scientific reports, 6 (2016) 1-14.DOI
- [29]M. Tahir, C. Cao, N. Mahmood, F.K. Butt, A. Mahmood, F. Idrees, S. Hussain, M. Tanveer, Z. Ali, I. Aslam, Multifunctional g-C3N4 nanofibers: a template-free fabrication and enhanced optical, electrochemical, and photocatalyst properties. ACS applied materials & interfaces, 6 (2014) 1258-1265.
- [30]S. Wang, C. Li, T. Wang, P. Zhang, A. Li, J. Gong, Controllable synthesis of nanotube-type graphitic C 3 N 4 and their visible-light photocatalytic and fluorescent properties. Journal of Materials Chemistry A, 2 (2014) 2885-2890.
- [31]X. Zhang, X. Xie, H. Wang, J. Zhang, B. Pan, Y. Xie, Enhanced photoresponsive ultrathin graphitic-phase C3N4 nanosheets for bioimaging. Journal of the American Chemical Society, 135 (2013) 18-21.
- [32]J. Tian, Q. Liu, A.M. Asiri, A.O. Al-Youbi, X. Sun, Ultrathin graphitic carbon nitride nanosheet: a highly efficient fluorescent sensor for rapid, ultrasensitive detection of Cu2+. Analytical chemistry, 85 (2013) 5595-5599.DOI
- [33]J. Xu, L. Zhang, R. Shi, Y. Zhu, Chemical exfoliation of graphitic carbon nitride for efficient heterogeneous photocatalysis. Journal of Materials Chemistry A, 1 (2013) 14766-14772.DOI
- [34]P. Niu, L. Zhang, G. Liu, H.M. Cheng, Graphene-like carbon nitride nanosheets for improved photocatalytic activities. Advanced Functional Materials, 22 (2012) 4763-4770.DOI
- [35]M. Chebanenko, N. Zakharova, A. Lobinsky, V. Popkov, Ultrasonic-assisted exfoliation of graphitic carbon nitride and its electrocatalytic performance in process of ethanol reforming. Semiconductors, 53 (2019) 2072-2077.DOI
- [36]Li Jun Fang, Yu Hang Li, Peng Fei Liu, Dan Ping Wang, Hui Dan Zeng, Xue Lu Wang, Hua Gui Yang ACS Sustainable Chem. Eng. 2017, 5, 2039–2043].
- [37]Y. Li, M. Yang, Y. Xing, X. Liu, Y. Yang, X. Wang, S. Song, Preparation of carbon-rich g-C3N4 nanosheets with enhanced visible light utilization for efficient photocatalytic hydrogen production. Small, 13 (2017) 1701552.DOI
- [38]S. Sun, X. Gou, S. Tao, J. Cui, J. Li, Q. Yang, S. Liang, Z. Yang, Mesoporous graphitic carbon nitride (gC 3 N 4) nanosheets synthesized from carbonated beverage-reformed commercial melamine for enhanced photocatalytic hydrogen evolution. Materials Chemistry Frontiers, 3 (2019) 597-605.DOI
- [39]H. Miao, G. Zhang, X. Hu, J. Mu, T. Han, J. Fan, C. Zhu, L. Song, J. Bai, X. Hou, A novel strategy to prepare 2D g-C3N4 nanosheets and their photoelectrochemical properties. Journal of Alloys and Compounds, 690 (2017) 669-676.DOI
- [40]F. Jia, Y. Zhang, W. Hu, M. Lv, C. Jia, J. Liu, In-situ construction of superhydrophilic g-C3N4 film by vapor-assisted confined deposition for photocatalysis. Frontiers in Materials, 6 (2019) 52.DOI
- [41]J. Safaei, N.A. Mohamed, M.F.M. Noh, M.F. Soh, M.A. Riza, N.S.M. Mustakim, N.A. Ludin, M.A. Ibrahim, W.N.R.W. Isahak, M.A.M. Teridi, Facile fabrication of graphitic carbon nitride,(g-C3N4) thin film. Journal of Alloys and Compounds, 769 (2018) 130-135.DOI
- [42]S. Yan, Z. Li, Z. Zou, Photodegradation performance of g-C3N4 fabricated by directly heating melamine. Langmuir, 25 (2009) 10397-10401.DOI
- [43]X. Bai, L. Wang, R. Zong, Y. Zhu, Photocatalytic activity enhanced via g-C3N4 nanoplates to nanorods. The Journal of Physical Chemistry C, 117 (2013) 9952-9961.
- [44]J. Tong, L. Zhang, F. Li, K. Wang, L. Hana and S. Cao, Rapid and high-yield production of g-C3N4 nanosheets via chemical exfoliation for photocatalytic H2 evolution, RSC Adv. 5 (2015) 88149-88153.
- [45]Y. Hong, E. Liu, J. Shi, X. Lin, L. Sheng, M. Zhang, L. Wang, J. Chen, A direct one-step synthesis of ultrathin g-C3N4 nanosheets from thiourea for boosting solar photocatalytic H2 evolution. international journal of hydrogen energy, 44 (2019) 7194-7204.DOI
- [46]D. Li, M.B. Müller, S. Gilje, R.B. Kaner, G.G. Wallace, Processable aqueous dispersions of graphene nanosheets. Nature nanotechnology, 3 (2008) 101-105.DOI
- [47]M. Groenewolt, M. Antonietti, Synthesis of g-C3N4 nanoparticles in mesoporous silica host matrices. Advanced materials, 17 (2005) 1789-1792.
- [48]W.H. Weber, R. Merlin, Raman scattering in materials science, Springer Science & Business Media, 2013.
- [49]J. Mendez, A. Gaona-Couto, S. Muhl, S. Jimenez-Sandoval, Vibrational and optical properties of carbon nitride films prepared by reactive magnetron sputtering. Journal of Physics: Condensed Matter, 11 (1999) 5225.
- [50]Q. Xiang, J. Yu, M. Jaroniec, Preparation and enhanced visible-light photocatalytic H2-production activity of graphene/C3N4 composites. The Journal of Physical Chemistry C, 115 (2011) 7355-7363.DOI
- [51]J. Jiang, L. Ou-yang, L. Zhu, A. Zheng, J. Zou, X. Yi, H. Tang, Dependence of electronic structure of g-C3N4 on the layer number of its nanosheets: a study by Raman spectroscopy coupled with first-principles calculations. Carbon, 80 (2014) 213-221.DOI
- [52]S. Tonda, S. Kumar, S. Kandula, V. Shanker, Fe-doped and-mediated graphitic carbon nitride nanosheets for enhanced photocatalytic performance under natural sunlight. Journal of Materials Chemistry A, 2 (2014) 6772-6780.DOI
- [53]T.Y. Ma, Y. Tang, S. Dai, S.Z. Qiao, Proton-functionalized two-dimensional graphitic carbon nitride nanosheet: an excellent metal-/label-free biosensing platform. Small, 10 (2014) 2382-2389.DOI
- [54]S. Martha, A. Nashim, K. Parida, Facile synthesis of highly active gC 3 N 4 for efficient hydrogen production under visible light. Journal of Materials Chemistry A, 1 (2013) 7816-7824.
- [55]P. Wu, J. Wang, J. Zhao, L. Guo, F.E. Osterloh, Structure defects in gC 3 N 4 limit visible light driven hydrogen evolution and photovoltage. Journal of Materials Chemistry A, 2 (2014) 20338-20344.DOI
- [56]T. Miller, A.B. Jorge, T. Suter, A. Sella, F. Corà, P. McMillan, Carbon nitrides: synthesis and characterization of a new class of functional materials. Physical Chemistry Chemical Physics, 19 (2017) 15613-15638.DOI
- [57]B.V. Lotsch, M. Döblinger, J. Sehnert, L. Seyfarth, J. Senker, O. Oeckler, W. Schnick, Unmasking melon by a complementary approach employing electron diffraction, solid-state NMR spectroscopy, and theoretical calculations—structural characterization of a carbon nitride polymer. Chemistry–A European Journal, 13 (2007) 4969-4980.
- [58]Q. Liang, Z. Li, Z.H. Huang, F. Kang, Q.H. Yang, Holey graphitic carbon nitride nanosheets with carbon vacancies for highly improved photocatalytic hydrogen production. Advanced Functional Materials, 25 (2015) 6885-6892.DOI
- [59]L. J. Fang, Y. H. Li, P. F. Liu, D. P. Wang, H. D. Zeng, X. L. Wang, H. G. Yang, ACS Sustainable Chem. Eng. 5 (2017) 2039–2043.
- [60]L.-R. Zou, G.-F. Huang, D.-F. Li, J.-H. Liu, A.-L. Pan, W.-Q. Huang, A facile and rapid route for synthesis of gC 3 N 4 nanosheets with high adsorption capacity and photocatalytic activity. RSC advances, 6 (2016) 86688-86694.DOI
- [61]R. Chen, J. Zhang, Y. Wang, X. Chen, J.A. Zapien, C.-S. Lee, Graphitic carbon nitride nanosheet@ metal–organic framework core–shell nanoparticles for photo-chemo combination therapy. Nanoscale, 7 (2015) 17299-17305.DOI
- [62]A. Vinu, Two-dimensional hexagonally-ordered mesoporous carbon nitrides with tunable pore diameter, surface area and nitrogen content. Advanced Functional Materials, 18 (2008) 816-827.DOI
- [63]F. Dong, Z. Zhao, T. Xiong, Z. Ni, W. Zhang, Y. Sun, W.-K. Ho, In situ construction of g-C3N4/g-C3N4 metal-free heterojunction for enhanced visible-light photocatalysis. ACS applied materials & interfaces, 5 (2013) 11392-11401.DOI
- [64]S. Yang, Y. Gong, J. Zhang, L. Zhan, L. Ma, Z. Fang, R. Vajtai, X. Wang, P.M. Ajayan, Exfoliated graphitic carbon nitride nanosheets as efficient catalysts for hydrogen evolution under visible light. Advanced materials, 25 (2013) 2452-2456.DOI
- [65]V.N. Khabashesku, J.L. Zimmerman, J.L. Margrave, Powder synthesis and characterization of amorphous carbon nitride. Chemistry of materials, 12 (2000) 3264-3270.DOI
- [66]E.M. Dias, K.C. Christoforidis, L. Francas, C. Petit, Tuning thermally treated graphitic carbon nitride for H2 evolution and CO2 photoreduction: the effects of material properties and mid-gap states. ACS Applied Energy Materials, 1 (2018) 6524-6534.DOI
- [67]D. Hernández-Uresti, A. Vázquez, D. Sanchez-Martinez, S. Obregón, Performance of the polymeric g-C3N4 photocatalyst through the degradation of pharmaceutical pollutants under UV–vis irradiation. Journal of Photochemistry and Photobiology A: Chemistry, 324 (2016) 47-52.DOI
- [68]L. Svoboda, P. Praus, M.J. Lima, M.J. Sampaio, D. Matýsek, M. Ritz, R. Dvorský, J.L. Faria, C.G. Silva, Graphitic carbon nitride nanosheets as highly efficient photocatalysts for phenol degradation under high-power visible LED irradiation. Materials Research Bulletin, 100 (2018) 322-332.DOI
- [69]Y. Zhang, Q. Pan, G. Chai, M. Liang, G. Dong, Q. Zhang, J. Qiu, Synthesis and luminescence mechanism of multicolor-emitting g-C3N4 nanopowders by low temperature thermal condensation of melamine. Scientific reports, 3 (2013) 1943.DOI
- [70]Y. Yuan, L. Zhang, J. Xing, M.I.B. Utama, X. Lu, K. Du, Y. Li, X. Hu, S. Wang, A. Genç, High-yield synthesis and optical properties of gC 3 N 4. Nanoscale, 7 (2015) 12343-12350.DOI
- [71]B. Wang, Q. Cheng, L. Wang, K. Zheng, K. Ostrikov, The effect of temperature on the mechanism of photoluminescence from plasma-nucleated, nitrogenated carbon nanotips. Carbon, 50 (2012) 3561-3571.DOI
- [72]X. Li, J. Zhang, L. Shen, Y. Ma, W. Lei, Q. Cui, G. Zou, Preparation and characterization of graphitic carbon nitride through pyrolysis of melamine. Applied Physics A, 94 (2009) 387-392.DOI
- [73]S. Cao, J. Yu, g-C3N4-based photocatalysts for hydrogen generation. The journal of physical chemistry letters, 5 (2014) 2101-2107.
- [74]X. Wang, K. Maeda, A. Thomas, K. Takanabe, G. Xin, J.M. Carlsson, K. Domen, M. Antonietti, A metal-free polymeric photocatalyst for hydrogen production from water under visible light. Nature materials, 8 (2009) 76-80.
- [75]X. Li, J. Yu, J. Low, Y. Fang, J. Xiao, X. Chen, Engineering heterogeneous semiconductors for solar water splitting. Journal of Materials Chemistry A, 3 (2015) 2485-2534.DOI
- [76]F. Ding, D. Yang, Z. Tong, Y. Nan, Y. Wang, X. Zou, Z. Jiang, Graphitic carbon nitride-based nanocomposites as visible-light driven photocatalysts for environmental purification. Environmental Science: Nano, 4 (2017) 1455-1469.DOI
- [77]Y. Zheng, L. Lin, B. Wang, X. Wang, Graphitic carbon nitride polymers toward sustainable photoredox catalysis. Angewandte Chemie International Edition, 54 (2015) 12868-12884.DOI
- [78]Y. Ren, D. Zeng, W.-J. Ong, Interfacial engineering of graphitic carbon nitride (g-C3N4)-based metal sulfide heterojunction photocatalysts for energy conversion: a review. Chinese Journal of Catalysis, 40 (2019) 289-319.DOI
- [79]S.R. Nagella, R. Vijitha, B.R. Naidu, K.K. Rao, C.-S. Ha, K. Venkateswarlu, Benchmarking recent advances in hydrogen production using g-C3N4-based photocatalysts. Nano Energy, 111 (2023) 108402.DOI
- [80]R. Fagan, D.E. McCormack, S.J. Hinder, S.C. Pillai, Photocatalytic properties of g-C3N4–TiO2 heterojunctions under UV and visible light conditions. Materials, 9 (2016) 286.
- [81]M. Fuentez-Torres, F. Ortiz-Chi, C. Espinosa-González, M. Aleman, A. Cervantes-Uribe, J. Torres-Torres, M. Kesarla, V. Collins-Martínez, S. Godavarthi, L. Martínez-Gómez, Facile synthesis of Zn doped gC 3 N 4 for enhanced visible light driven photocatalytic hydrogen production. Topics in Catalysis, 64 (2021) 65-72.
- [82]Y. Qin, H. Li, J. Lu, Y. Feng, F. Meng, C. Ma, Y. Yan, M. Meng, Synergy between van der waals heterojunction and vacancy in ZnIn2S4/g-C3N4 2D/2D photocatalysts for enhanced photocatalytic hydrogen evolution. Applied Catalysis B: Environmental, 277 (2020) 119254.DOI
- [83]B. Antil, L. Kumar, R. Ranjan, S. Shenoy, K. Tarafder, C.S. Gopinath, S. Deka, One-dimensional multichannel g-C3N4. 7 nanostructure realizing an efficient photocatalytic hydrogen evolution reaction and its theoretical investigations. ACS Applied Energy Materials, 4 (2021) 3118-3129.DOI
- [84]L. Zhang, R. Long, Y. Zhang, D. Duan, Y. Xiong, Y. Zhang, Y. Bi, Direct observation of dynamic bond evolution in single-atom Pt/C3N4 catalysts. Angewandte Chemie, 132 (2020) 6283-6288.DOI
- [85]G. Yao, S. Yang, J. He, S. Jiang, C. Sun, S. Song, In situ growing graphene on g-C3N4 with barrier-free interface and polarization electric field for strongly boosting solar energy conversion into H2 energy. Applied Catalysis B: Environmental, 287 (2021) 119986.DOI
- [86]Q. Zhao, Y. Li, K. Hu, X. Guo, Y. Qu, Z. Li, F. Yang, H. Liu, C. Qin, L. Jing, Controlled synthesis of nitro-terminated poly [2-(3-thienyl)-ethanol]/g-C3N4 nanosheet heterojunctions for efficient visible-light photocatalytic hydrogen evolution. ACS Sustainable Chemistry & Engineering, 9 (2021) 7306-7317.DOI
- [87]W. Wang, X. Bai, Q. Ci, L. Du, X. Ren, D.L. Phillips, Near-field drives long-lived shallow trapping of polymeric C3N4 for efficient photocatalytic hydrogen evolution. Advanced Functional Materials, 31 (2021) 2103978.DOI
- [88]J. Yan, Z. Song, H. Li, H. Xu, L.Y.S. Lee, Carbon-mediated electron transfer channel between SnO2 QDs and g-C3N4 for enhanced photocatalytic H2 production. Chemical Engineering Journal, 425 (2021) 131512.DOI
- [89]H. Zhou, J. Ke, H. Wu, J. Liu, D. Xu, X. Zou, Manganese tungstate/graphitic carbon nitride S-scheme heterojunction for boosting hydrogen evolution and mechanism exploration. Materials Today Energy, 23 (2022) 100918.DOI
- [90]W. Shi, W. Sun, Y. Liu, X. Li, X. Lin, F. Guo, Y. Hong, Onion-ring-like g-C3N4 modified with Bi3TaO7 quantum dots: a novel 0D/3D S-scheme heterojunction for enhanced photocatalytic hydrogen production under visible light irradiation. Renewable Energy, 182 (2022) 958-968.DOI
- [91]H. Wang, Y. Zhao, X. Zhan, J. Yu, L. Chen, Y. Sun, H. Shi, Calcination synthesis of tin niobate loaded porous carbon nitride S-scheme heterojunction for photocatalytic H2 production and tetracycline degradation. Journal of Alloys and Compounds, 899 (2022) 163250.DOI
- [92]X. Chen, X. Ke, J. Zhang, C. Yang, K. Dai, C. Liang, Insight into the synergy of amine-modified S-scheme Cd₀. 5Zn0. 5Se/porous g-C3N4 and noble-metal-free Ni2P for boosting photocatalytic hydrogen generation. Ceramics International, 47 (2021) 13488-13499.DOI
- [93]D. Gogoi, A.K. Shah, M. Qureshi, A.K. Golder, N.R. Peela, Silver grafted graphitic-carbon nitride ternary hetero-junction Ag/gC3N4 (Urea)-gC3N4 (Thiourea) with efficient charge transfer for enhanced visible-light photocatalytic green H2 production. Applied Surface Science, 558 (2021) 149900.DOI
- [94]A. Kumar, G. Sharma, A. Kumari, C. Guo, M. Naushad, D.-V.N. Vo, J. Iqbal, F.J. Stadler, Construction of dual Z-scheme g-C3N4/Bi4Ti3O12/Bi4O5I2 heterojunction for visible and solar powered coupled photocatalytic antibiotic degradation and hydrogen production: Boosting via I−/I3− and Bi3+/Bi5+ redox mediators. Applied Catalysis B: Environmental, 284 (2021) 119808.DOI
- [95]Y. Yang, J. Chen, C. Liu, Z. Sun, M. Qiu, G. Yan, F. Gao, Dual-Z-Scheme Heterojunction for Facilitating Spacial Charge Transport Toward Ultra-Efficient Photocatalytic H2 Production. Solar RRL, 5 (2021) 2100241.DOI
- [96]J. Wang, L. Yu, Z. Wang, W. Wei, K. Wang, X. Wei, Constructing 0D/2D Z-Scheme Heterojunction of CdS/gC 3 N 4 with Enhanced Photocatalytic Activity for H2 Evolution. Catalysis Letters, (2021) 1-12.
- [97]J. Zhang, F. Su, P. Wen, Y. Wang, B. Zhao, L. Jiang, Y. Sun, In situ growth of Co2P nanocrystal on g-C3N4 for efficient and stable photocatalytic hydrogen evolution. Energy & Fuels, 35 (2021) 1859-1865.
- [98]P. Rambabu, N.R. Peela, In-situ CdS nanowires on g-C3N4 nanosheet heterojunction construction in 3D-Optofluidic microreactor for the photocatalytic green hydrogen production. International Journal of Hydrogen Energy, 48 (2023) 15406-15420.DOI
- [99]X. Ma, Y. Lv, J. Xu, Y. Liu, R. Zhang, Y. Zhu, A strategy of enhancing the photoactivity of g-C3N4 via doping of nonmetal elements: a first-principles study. The Journal of Physical Chemistry C, 116 (2012) 23485-23493.DOI
- [100]K. Wang, Q. Li, B. Liu, B. Cheng, W. Ho, J. Yu, Sulfur-doped g-C3N4 with enhanced photocatalytic CO2-reduction performance. Applied Catalysis B: Environmental, 176 (2015) 44-52.
- [101]X. She, L. Liu, H. Ji, Z. Mo, Y. Li, L. Huang, D. Du, H. Xu, H. Li, Template-free synthesis of 2D porous ultrathin nonmetal-doped g-C3N4 nanosheets with highly efficient photocatalytic H2 evolution from water under visible light. Applied Catalysis B: Environmental, 187 (2016) 144-153.DOI
- [102]J. Luo, G. Dong, Y. Zhu, Z. Yang, C. Wang, Switching of semiconductor behavior from n-type to p-type induced high photocatalytic NO removal activity in g-C3N4. Applied Catalysis B: Environmental, 214 (2017) 46-56.DOI
- [103]Z.-A. Lan, G. Zhang, X. Wang, A facile synthesis of Br-modified g-C3N4 semiconductors for photoredox water splitting. Applied Catalysis B: Environmental, 192 (2016) 116-125.DOI
- [104]Y. Liao, S. Zhu, Z. Chen, X. Lou, D. Zhang, A facile method of activating graphitic carbon nitride for enhanced photocatalytic activity. Physical Chemistry Chemical Physics, 17 (2015) 27826-27832.
- [105]Xingguo Ma, Yanhui Lv, Jing Xu, Yanfang Liu, Ruiqin Zhang, Yongfa Zhu J. Phys. Chem. C 2012, 116, 23485–23493
- [106][Ke Wang, Qin Li, Baoshun Liu, Bei Cheng, Wingkei Ho, Jiaguo Yu Applied Catalysis B: Environmental 176–177 (2015) 44–52].
- [107]G. Dong, D.L. Jacobs, L. Zang, C. Wang, Carbon vacancy regulated photoreduction of NO to N2 over ultrathin g-C3N4 nanosheets. Applied Catalysis B: Environmental, 218 (2017) 515-524.DOI
- [108]X. Li, K. Zhang, M. Zhou, K. Yang, S. Yang, X. Ma, C. Yu, Y. Xie, W. Huang, Q. Fan, A novel approach to synthesize nitrogen-deficient g-C3N4 for the enhanced photocatalytic contaminant degradation and electrocatalytic hydrogen evolution. Nano, 15 (2020) 2050006.DOI
- [109]Niu, P., Liu, G., & Cheng, H.-M. (2012). J. Phys. Chem. C, 116(20), 11013–11018.
- [110]D. Ruan, S. Kim, M. Fujitsuka, T. Majima, Defects rich g-C3N4 with mesoporous structure for efficient photocatalytic H2 production under visible light irradiation. Applied Catalysis B: Environmental, 238 (2018) 638-646.DOI
- [111]Y. Chen, J.C. Crittenden, S. Hackney, L. Sutter, D.W. Hand, Preparation of a novel TiO2-based p–n junction nanotube photocatalyst. Environmental science & technology, 39 (2005) 1201-1208.
- [112]S. Zhao, S. Chen, H. Yu, X. Quan, g-C3N4/TiO2 hybrid photocatalyst with wide absorption wavelength range and effective photogenerated charge separation. Separation and Purification Technology, 99 (2012) 50-54.DOI
- [113]D.R. Paul, S. Gautam, P. Panchal, S.P. Nehra, P. Choudhary, A. Sharma, ZnO-modified g-C3N4: a potential photocatalyst for environmental application. ACS omega, 5 (2020) 3828-3838.DOI
- [114]W. Liu, M. Wang, C. Xu, S. Chen, Facile synthesis of g-C₃N₄/ZnO composite with enhanced visible light photooxidation and photoreduction properties. Chemical Engineering Journal, 209 (2012) 386-393.DOI
- [115]J. Li, E. Liu, Y. Ma, X. Hu, J. Wan, L. Sun, J. Fan, Synthesis of MoS₂/g-C₃N₄ nanosheets as 2D heterojunction photocatalysts with enhanced visible light activity. Applied Surface Science, 364 (2016) 694-702.DOI
- [116]Dandan Zheng Guigang Zhang Yidong Hou Xinchen Wang APCATA 15613 10.1016/j.apcata.2015.10.037 Layering MoS2 on soft hollow g-C3N4 nanostructures for photocatalytic hydrogen evolution Dandan Zheng, Guigang Zhang, Yidong Hou, Xinchen Wang Applied Catalysis A: General, Volume 521, 5 July 2016, Pages 2-8DOI
- [117]Min Wang, Peng Ju, Jiajia Li, Yun Zhao, Xiuxun Han, Zhaomin Hao ACS Sustainable Chem. Eng. 2017, 5, 7878–7886
- [118]L. Huang, H. Xu, R. Zhang, X. Cheng, J. Xia, Y. Xu, H. Li, Synthesis and characterization of g-C₃N₄/MoO₃ photocatalyst with improved visible-light photoactivity. Applied surface science, 283 (2013) 25-32.DOI
- [119]X. Liu, Q. Zhang, L. Liang, L. Chen, Y. Wang, X. Tan, L. Wen, H. Huang, In situ growing of CoO nanoparticles on g-C₃N₄ composites with highly improved photocatalytic activity for hydrogen evolution. Royal Society Open Science, 6 (2019) 190433.DOI
- [120]Y. Liu, J. Zhang, X. Li, Z. Yao, L. Zhou, H. Sun, S. Wang, Graphitic carbon nitride decorated with CoP nanocrystals for enhanced photocatalytic and photoelectrochemical H₂ evolution. Energy & Fuels, 33 (2019) 11663-11676.DOI
- [121]J. Ran, W. Guo, H. Wang, B. Zhu, J. Yu, S.Z. Qiao, Metal-free 2D/2D phosphorene/g-C₃N₄ Van der Waals heterojunction for highly enhanced visible-light photocatalytic H2 production. Advanced materials, 30 (2018) 1800128.
- [122]K. Zhu, Y. Du, J. Liu, X. Fan, Z. Duan, G. Song, A. Meng, Z. Li, Q. Li, Graphitic carbon nitride (g-C₃N₄) nanosheets/graphene composites: in situ synthesis and enhanced photocatalytic performance. Journal of Nanoscience and Nanotechnology, 17 (2017) 2515-2519.
- [123]K. Chen, Z. Chai, C. Li, L. Shi, M. Liu, Q. Xie, Y. Zhang, D. Xu, A. Manivannan, Z. Liu, Catalyst-free growth of three-dimensional graphene flakes and graphene/g-C₃N₄ composite for hydrocarbon oxidation. ACS nano, 10 (2016) 3665-3673.DOI
- [124]Q. Hao, X. Niu, C. Nie, S. Hao, W. Zou, J. Ge, D. Chen, W. Yao, A highly efficient g-C₃N₄/SiO₂ heterojunction: the role of SiO₂ in the enhancement of visible light photocatalytic activity. Physical Chemistry Chemical Physics, 18 (2016) 31410-31418.
- [125]T. Di, B. Zhu, B. Cheng, J. Yu, J. Xu, A direct Z-scheme g-C₃N₄/SnS₂ photocatalyst with superior visible-light CO₂ reduction performance. Journal of Catalysis, 352 (2017) 532-541.DOI
- [126]Z. Mo, H. Xu, Z. Chen, X. She, Y. Song, J. Lian, X. Zhu, P. Yan, Y. Lei, S. Yuan, Construction of MnO₂/Monolayer g-C₃N₄ with Mn vacancies for Z-scheme overall water splitting. Applied Catalysis B: Environmental, 241 (2019) 452-460.DOI
- [127]Y. Hong, Z. Fang, B. Yin, B. Luo, Y. Zhao, W. Shi, C. Li, A visible-light-driven heterojunction for enhanced photocatalytic water splitting over Ta₂O₅ modified g-C₃N₄ photocatalyst, International Journal of Hydrogen Energy 42 (2017) 6738-6745.DOI
- [128]X. She, J. Wu, H. Xu, J. Zhong, Y. Wang, Y. Song, K. Nie, Y. Liu, Y. Yang, M.T.F. Rodrigues, High efficiency photocatalytic water splitting using 2D α-Fe₂O₃/g-C₃N₄ Z-scheme catalysts. Advanced Energy Materials, 7 (2017) 1700025.DOI
- [129]X. Ma, X. Li, M. Li, X. Ma, L. Yu, Y. Dai, Effect of the structure distortion on the high photocatalytic performance of C₆₀/g-C₃N₄ composite. Applied Surface Science, 414 (2017) 124-130.
- [130]S.A. Hussain, D. Dey, S. Chakraborty, J. Saha, A.D. Roy, S. Chakraborty, P. Debnath, D. Bhattacharjee, Fluorescence resonance energy transfer (FRET) sensor. arXiv preprint arXiv:1408.6559, (2014).arxiv.org/abs/1408.6559
- [131]G. Shiravand, A. Badiei, G.M. Ziarani, Carboxyl-rich g-C₃N₄ nanoparticles: Synthesis, characterization and their application for selective fluorescence sensing of Hg₂⁺ and Fe₃⁺ in aqueous media. Sensors and Actuators B: Chemical, 242 (2017) 244-252.DOI
- [132]M. Rong, L. Lin, X. Song, Y. Wang, Y. Zhong, J. Yan, Y. Feng, X. Zeng, X. Chen, Fluorescence sensing of chromium (VI) and ascorbic acid using graphitic carbon nitride nanosheets as a fluorescent “switch”. Biosensors and Bioelectronics, 68 (2015) 210-217.
- [133]J.-W. Liu, Y. Luo, Y.-M. Wang, L.-Y. Duan, J.-H. Jiang, R.-Q. Yu, Graphitic carbon nitride nanosheets-based ratiometric fluorescent probe for highly sensitive detection of H₂O₂ and glucose. ACS applied materials & interfaces, 8 (2016) 33439-33445.
- [134]J. Duan, Y. Zhang, Y. Yin, H. Li, J. Wang, L. Zhu, A novel “on-off-on” fluorescent sensor for 6-thioguanine and Hg₂+ based on g-C₃N₄ nanosheets. Sensors and Actuators B: Chemical, 257 (2018) 504-510.DOI
- [135]X.-L. Zhang, C. Zheng, S.-S. Guo, J. Li, H.-H. Yang, G. Chen, Turn-on fluorescence sensor for intracellular imaging of glutathione using g-C₃N₄ nanosheet–MnO₂ sandwich nanocomposite. Analytical chemistry, 86 (2014) 3426-3434.DOI
- [136]S. Hu, W. Ouyang, L. Guo, Z. Lin, X. Jiang, B. Qiu, G. Chen, Facile synthesis of Fe₃O₄/g-C₃N₄/HKUST-1 composites as a novel biosensor platform for ochratoxin A. Biosensors and Bioelectronics, 92 (2017) 718-723.DOI
- [137]J. Han, H.Y. Zou, M.X. Gao, C.Z. Huang, A graphitic carbon nitride based fluorescence resonance energy transfer detection of riboflavin. Talanta, 148 (2016) 279-284.
- [138]R. Xu, J. Jiang, L. Ding, D. Song, Y. Chen, Innovation of Ratiometric Sensing Strategies Based on Graphitic Carbon Nitride. Critical Reviews in Analytical Chemistry, (2025) 1-25.DOI
- [139]Y. Chen, Y. Zhu, Y. Zhao, J. Wang, Fluorescent and colorimetric dual-response sensor based on copper (II)-decorated graphitic carbon nitride nanosheets for detection of toxic organophosphorus. Food chemistry, 345 (2021) 128560.
- [140]Y.-X. Wu, H.-X. Huang, M.-A. Yang, Y. Sun, J. Xu, X. Ling, J.-P. Lai, H. Sun, A turn-on fluorescence sensor for highly selective detection of chlortetracycline based on AIE effect enhanced by citrate modified graphitic carbon nitride nanodots. Microchemical Journal, 199 (2024) 110180.
- [141]Y. Zhou, J. Gou, H. Gong, D. Zhao, H. Liu, Internal light-driven efficient chemiluminescence of graphitic carbon nitride quantum dots for improved carboxin sensing. Sensors and Actuators B: Chemical, 419 (2024) 136415.
- [142]Z. Li, L. Wu, Y. Liu, L. Gao, H. Wang, Y. Zhang, An efficient fluorescence sensor based on chitosan-modified graphitic carbon nitride for selective determination of Cu²⁺ ions. Microchemical Journal, 200 (2024) 110249.
- [143]C. Yin, Y. Liu, T. Hu, X. Chen, Graphitic Carbon Nitride Nanomaterials-Based Electrochemical Sensing Interfaces for Monitoring Heavy Metal Ions in Aqueous Environments. Nanomaterials, 15 (2025) 564.
- [144]S. Kokkotos, E. Vasilaki, L. Sygellou, M. Vamvavaki, A. Klini, Graphitic carbon nitride (g-C₃N₄) optical sensors for environmental monitoring. Diamond and Related Materials, 155 (2025) 112301.
- [145]L. Jia, Y. Liu, L. Zou, H. Ren, Z. Li, H. Niu, H. Liao, X. Zhang, S. An, F. Ren, High throughput signal-off-on fluorescent aptasensor for Pb²⁺ detection based on fluorescence resonance energy transfer between graphite phase carbon nitride nanosheets and gold nanoparticles. IEEE Sensors Journal, (2025).
- [146]X. Sun, Y. Ji, Y. Meng, X. Zhang, M. Guo, S. Shuang, C. Dong, The graphite-phase carbon nitride/silver nanoclusters nanocomposites ratiometric fluorescent probe for detection of glutathione and recognition of cancer cells. Microchemical Journal, (2025) 113706.
- [147]T. Ahmad, S. Khan, T. Rasheed, N. Ullah, Graphitic carbon nitride nanosheets as promising candidates for the detection of hazardous contaminants of environmental and biological concern in aqueous matrices. Microchimica Acta, 189 (2022) 426.
- [148]H. Mei, Q. Wang, J. Jiang, X. Zhu, H. Wang, S. Qu, X. Wang, A novel ratiometric nanoprobe based on copper nanoclusters and graphitic carbon nitride nanosheets using Ce (III) as crosslinking agent and aggregation-induced effect initiator for sensitive detection of hydrogen peroxide and glucose. Talanta, 248 (2022) 123604.
- [149]T. Alizadeh, F. Rafiei, M. Akhoundian, A novel chloride selective potentiometric sensor based on graphitic carbon nitride/silver chloride (g-C₃N₄/AgCl) composite as the sensing element. Talanta, 237 (2022) 122895.
- [150]X. Lin, C. Hong, Z. Lin, Z. Huang, Rapid detection of histamine in fish based on the fluorescence characteristics of carbon nitride. Journal of Food Composition and Analysis, 112 (2022) 104659.
- [151]Y. Liu, F. Chen, L. Bao, W. Hai, Construction of a non-enzymatic electrochemical sensor based on graphitic carbon nitride nanosheets for sensitive detection of procalcitonin. RSC advances, 12 (2022) 22518-22525.
- [152]M. M. Shanbhag, G. Manasa, R. J. Mascarenhas, K. Mondal, N. P. Shetti, Fundamentals of bio-electrochemical sensing, Chemical Engineering Journal Advances, 16 (2023) 100516.
- [153]J. Liu, H. Wang and M. Antonietti, Graphitic carbon nitride “reloaded”: emerging applications beyond (photo)catalysis, Chem. Soc. Rev. 45 (2016) 2308.
- [154]Z. Zhou, Q. Shang, Y. Shen, L. Zhang, Y. Zhang, Y. Lv, Y. Li, S. Liu, Y. Zhang, Chemically modulated carbon nitride nanosheets for highly selective electrochemiluminescent detection of multiple metal-ions. Analytical chemistry, 88 (2016) 6004-6010.
- [155]C. Rajkumar, P. Veerakumar, S.-M. Chen, B. Thirumalraj, K.-C. Lin, Ultrathin sulfur-doped graphitic carbon nitride nanosheets as metal-free catalyst for electrochemical sensing and catalytic removal of 4-nitrophenol. ACS Sustainable Chemistry & Engineering, 6 (2018) 16021-16031.
- [156]J. Zou, D. Mao, N. Li, J. Jiang, Reliable and selective lead-ion sensor of sulfur-doped graphitic carbon nitride nanoflakes. Applied Surface Science, 506 (2020) 144672.
- [157]J. Zhang, Z. Zhu, J. Di, Y. Long, W. Li, Y. Tu, A sensitive sensor for trace Hg₂+ determination based on ultrathin g-C₃N₄ modified glassy carbon electrode. Electrochimica Acta, 186 (2015) 192-200.
- [158]J. Cao, C. Qin, Y. Wang, B. Zhang, Y. Gong, H. Zhang, G. Sun, H. Bala, Z. Zhang, Calcination method synthesis of SnO₂/g-C₃N₄ composites for a high-performance ethanol gas sensing application. Nanomaterials, 7 (2017) 98.
- [159]J. Zhai, T. Wang, C. Wang, D. Liu, UV-light-assisted ethanol sensing characteristics of g-C₃N₄/ZnO composites at room temperature. Applied Surface Science, 441 (2018) 317-323.
- [160]Y. Zhang, D. Zhang, W. Guo, S. Chen, The α-Fe₂O₃/g-C₃N₄ heterostructural nanocomposites with enhanced ethanol gas sensing performance. Journal of Alloys and Compounds, 685 (2016) 84-90.
- [161]N.T. Hang, S. Zhang, W. Yang, Efficient exfoliation of g-C₃N₄ and NO₂ sensing behavior of graphene/g-C₃N₄ nanocomposite. Sensors and Actuators B: Chemical, 248 (2017) 940-948.
- [162]Y.-X. Dong, J.-T. Cao, B. Wang, S.-H. Ma, Y.-M. Liu, Spatial-resolved photoelectrochemical biosensing array based on a CdS@ g-C₃N₄ heterojunction: a universal immunosensing platform for accurate detection. ACS Applied Materials & Interfaces, 10 (2018) 3723-3731.
- [163]J. Tian, Q. Liu, C. Ge, Z. Xing, A.M. Asiri, A.O. Al-Youbi, X. Sun, Ultrathin graphitic carbon nitride nanosheets: a low-cost, green, and highly efficient electrocatalyst toward the reduction of hydrogen peroxide and its glucose biosensing application. Nanoscale, 5 (2013) 8921-8924.
- [164]S. Lv, Y. Li, K. Zhang, Z. Lin, D. Tang, Carbon dots/g-C₃N₄ nanoheterostructures-based signal-generation tags for photoelectrochemical immunoassay of cancer biomarkers coupling with copper nanoclusters. ACS applied materials & interfaces, 9 (2017) 38336-38343.
- [165]J. Zou, S. Wu, Y. Liu, Y. Sun, Y. Cao, J.-P. Hsu, A.T.S. Wee, J. Jiang, An ultrasensitive electrochemical sensor based on 2D g-C₃N₄/CuO nanocomposites for dopamine detection. Carbon, 130 (2018) 652-663.
- [166]Y. Liu, H. Ma, Y. Zhang, X. Pang, D. Fan, D. Wu, Q. Wei, Visible light photoelectrochemical aptasensor for adenosine detection based on CdS/PPy/g-C₃N₄ nanocomposites. Biosensors and Bioelectronics, 86 (2016) 439-445.
- [167]P. Liu, X. Huo, Y. Tang, J. Xu, X. Liu, D.K. Wong, A TiO2 nanosheet-g-C₃N₄ composite photoelectrochemical enzyme biosensor excitable by visible irradiation. Analytica Chimica Acta, 984 (2017) 86-95.
- [168]Y. Cao, L. Wang, C. Wang, X. Hu, Y. Liu, G. Wang, Sensitive detection of glyphosate based on a Cu-BTC MOF/g-C₃N₄ nanosheet photoelectrochemical sensor. Electrochimica Acta, 317 (2019) 341-347.
- [169]M. Pumera, Graphene-based nanomaterials for energy storage. Energy & Environmental Science, 4 (2011) 668-674.
- [170]Y. Hou, J. Li, Z. Wen, S. Cui, C. Yuan, J. Chen, N-doped graphene/porous g-C₃N₄ nanosheets supported layered-MoS₂ hybrid as robust anode materials for lithium-ion batteries. Nano Energy, 8 (2014) 157-164.
- [171]X. Li, Y. Feng, M. Li, W. Li, H. Wei, D. Song, Smart hybrids of Zn₂GeO₄ nanoparticles and ultrathin g-C₃N₄ layers: synergistic lithium storage and excellent electrochemical performance. Advanced Functional Materials, 25 (2015) 6858-6866.
- [172]V. Vo, X.D.N. Thi, Y.-S. Jin, G.L. Thi, T.T. Nguyen, T.Q. Duong, S.-J. Kim, SnO₂ nanosheets/g-C₃N₄ composite with improved lithium storage capabilities. Chemical Physics Letters, 674 (2017) 42-47.
- [173]K. Liu, J. Man, J. Cui, H. Zhang, T. Li, J. Yang, Z. Wen, J. Sun, Li₄Ti₅O₁₂/g-C₃N₄ composite with an improved lithium storage capability. Materials Letters, 234 (2019) 117-120.
- [174]S. Wang, Y. Shi, C. Fan, J. Liu, Y. Li, X. Wu, H. Xie, J. Zhang, H. Sun, Layered g-C₃N₄@Reduced Graphene Oxide Composites as Anodes with Improved Rate Performance for Lithium-Ion Batteries, ACS Appl. Mater. Interfaces 10, (2018) 30330–30336.
- [175]Y. Zuo, X. Xu, C. Zhang, J. Li, R. Du, X. Wang, X. Han, J. Arbiol, J. Llorca, J. Liu, A. Cabot, SnS₂/g-C₃N₄/graphite nanocomposites as durable lithium-ion battery anode with high pseudocapacitance contribution, Electrochimica Acta, 349 (2020) 136369.
- [176]F.-F. Wang, Y.-R. Ji, Y.-H. Chen, P.-F. Wang, Q.-Z. Lai, F. Qiu, Y.-R. Zhu, T.-F. Yi, Rational construction of graphitic carbon nitride composited Li-rich Mn-based oxide cathode materials toward high-performance Li-ion battery. Journal of Colloid and Interface Science, 652 (2023) 577-589.
- [177]Y. Zhao, H. Lu, X. Kong, J. Yang, Y. Nuli, J. Wang, Graphitic carbon nitride stabilized the lithium anode/sulfide electrolyte interface for all-solid-state lithium-sulfur battery. Chemical Engineering Journal, 489 (2024) 150887.
- [178]J. Joseph, S.K. Kannan, K.K. Surendran, M.G. Joseph, Porous activated carbon integrated carbon nitride nanosheets as functionalized separators for the efficient polysulfide entrapment in LiS batteries. Journal of Energy Storage, 102 (2024) 113998.
- [179]H. Tao, L. Xiong, S. Du, Y. Zhang, X. Yang, L. Zhang, Interwoven N and P dual-doped hollow carbon fibers/graphitic carbon nitride: an ultrahigh capacity and rate anode for Li and Na ion batteries. Carbon, 122 (2017) 54-63.
- [180]M.R. Raj, S.M.N. Jeghan, J. Baek, G. Lee, Hierarchical CuCo carbonate hydroxide nanowires/graphitic carbon nitride composites as high-performance anode materials for fast-charging and long-life lithium-ion batteries. Journal of Energy Storage, 88 (2024) 111569.
- [181]L. Shi, J. Zhang, H. Liu, M. Que, X. Cai, S. Tan, L. Huang, Flower-like Ni (OH)₂ hybridized g-C₃N₄ for high-performance supercapacitor electrode material. Materials Letters, 145 (2015) 150-153.
- [182]B. Dong, M. Li, S. Chen, D. Ding, W. Wei, G. Gao, S. Ding, Formation of g-C₃N₄@Ni (OH)₂ honeycomb nanostructure and asymmetric supercapacitor with high energy and power density. ACS Applied Materials & Interfaces, 9 (2017) 17890-17896.
- [183]W. Guo, J. Wang, C. Fan, Z. Chen, P. Liu, D. Zhu, Z. Xu, L. Pang, T. Li, Synthesis of carbon self-repairing porous g-C₃N₄ nanosheets/NiCo₂S₄ nanoparticles hybrid composite as high-performance electrode materials for supercapacitors. Electrochimica Acta, 253 (2017) 68-77.
- [184]X. Chen, X. Zhu, Y. Xiao, X. Yang, PEDOT/g-C₃N₄ binary electrode material for supercapacitors. Journal of Electroanalytical Chemistry, 743 (2015) 99-104.
- [185]G. Dong, H. Fan, K. Fu, L. Ma, S. Zhang, M. Zhang, J. Ma, W. Wang, The evaluation of super-capacitive performance of novel g-C₃N₄/PPy nanocomposite electrode material with sandwich-like structure. Composites Part B: Engineering, 162 (2019) 369-377.
- [186]S. Sun, L. Guo, X. Chang, Y. Yu, X. Zhai, MnO₂/g-C₃N₄@PPy nanocomposite for high-performance supercapacitor. Materials Letters, 236 (2019) 558-561.
- [187]V. Ragupathi, P. Panigrahi, N.G. Subramaniam, g-C₃N₄ doped MnS as high performance electrode material for supercapacitor application. Materials Letters, 246 (2019) 88-91.
- [188]S. Sanati, Z. Rezvani, g-C₃N₄ nanosheet@ CoAl-layered double hydroxide composites for electrochemical energy storage in supercapacitors. Chemical Engineering Journal, 362 (2019) 743-757.
- [189]Waris, S. Bano, M.S. Chaudhary, S. Sultana, M. Yadav, M.Z. Khan, Synthesis and characterization of graphitic carbon Nitride/Cd₂SnO₄ nanostructures for high-performance flexible supercapacitors, Solid State Sci. 160 (2025) 107817.
- [190]P. Chaluvachar, Y. Sudhakar, G. Mahesha, V.G. Nair, N. Desai, D.K. Pai, Emerging role of graphitic carbon nitride in advanced supercapacitors: A comprehensive review. Journal of Energy Chemistry 103 (2025) 498-524.
- [191]H. Liu, X. Lv, J. Qian, H. Li, Y. Qian, X. Wang, X. Meng, W. Lin, H. Wang, Graphitic carbon nitride quantum dots embedded in carbon nanosheets for near-infrared imaging-guided combined photo-chemotherapy. ACS nano, 14 (2020) 13304-13315.
- [192]Z. Zhou, Y. Shen, Y. Li, A. Liu, S. Liu, Y. Zhang, Chemical cleavage of layered carbon nitride with enhanced photoluminescent performances and photoconduction. ACS nano, 9 (2015) 12480-12487.
- [193]Y. Sun, J. Jiang, Y. Cao, Y. Liu, S. Wu, J. Zou, Facile fabrication of g-C3N4/ZnS/CuS heterojunctions with enhanced photocatalytic performances and photoconduction. Materials Letters, 212 (2018) 288-291.
- [194]L. Ye, D. Wang, S. Chen, Fabrication and enhanced photoelectrochemical performance of MoS2/S-doped g-C3N4 heterojunction film. ACS applied materials & interfaces, 8 (2016) 5280-5289.
- [195]S.K. Lai, C. Xie, K.S. Teng, Y. Li, F. Tan, F. Yan, S.P. Lau, Polymeric carbon nitride nanosheets/graphene hybrid phototransistors with high responsivity. Advanced optical materials, 4 (2016) 555-561.
- [196]D.B. Velusamy, M.A. Haque, M.R. Parida, F. Zhang, T. Wu, O.F. Mohammed, H.N. Alshareef, 2D organic–inorganic hybrid thin films for flexible UV-visible photodetectors. Advanced Functional Materials, 27 (2017) 1605554.
- [197]N. Prakash, G. Kumar, M. Singh, A. Barvat, P. Pal, S.P. Singh, H. Singh, S.P. Khanna, Binary Multifunctional Ultrabroadband Self-Powered g-C3N4/Si Heterojunction High-Performance Photodetector. Advanced Optical Materials, 6 (2018) 1800191.
- [198]D.B. Velusamy, J.K. El-Demellawi, A.M. El-Zohry, A. Giugni, S. Lopatin, M.N. Hedhili, A.E. Mansour, E.D. Fabrizio, O.F. Mohammed, H.N. Alshareef, MXenes for plasmonic photodetection. Advanced Materials, 31 (2019) 1807658.
- [199]S. Pal, S. Bayan, S.K. Ray, Piezo-phototronic mediated enhanced photodetection characteristics of plasmonic Au-g-C3N4/CdS/ZnO based hybrid heterojunctions on a flexible platform. Nanoscale, 10 (2018) 19203-19211.
- [200]X. Gan, R. Lv, T. Zhang, F. Zhang, M. Terrones, F. Kang, Transferable polymeric carbon nitride/nitrogen-doped graphene films for solid state optoelectronics. Carbon, 138 (2018) 69-75.
- [201]H. Fang, H. Ma, C. Zheng, S. Lennon, W. Wu, L. Wu, H. Wang, A high-performance transparent photodetector via building hierarchical g-C3N4 nanosheets/CNTs van der Waals heterojunctions by a facile and scalable approach. Applied Surface Science, 529 (2020) 147122.
- [202]K. Sarkar, P. Kumar, Activated hybrid g-C₃N₄/porous GaN heterojunction for tunable self-powered and broadband photodetection. Applied Surface Science, 566 (2021) 150695.
- [203]A. Ghosh, H. Saini, A. Sarkar, P. Guha, A.K. Samantara, R. Thapa, S. Mandal, A. Mandal, J. Behera, S.K. Ray, Nitrogen vacancy and hydrogen substitution mediated tunable optoelectronic properties of g-C₃N₄ 2D layered structures: applications towards blue LED to broad-band photodetection. Applied Surface Science, 556 (2021) 149773.
- [204]Y. Zhang, Y. Xu, J. Guo, X. Zhang, X. Liu, Y. Fu, F. Zhang, C. Ma, Z. Shi, R. Cao, Designing of 0D/2D mixed-dimensional van der waals heterojunction over ultrathin g-C₃N₄ for high-performance flexible self-powered photodetector. Chemical Engineering Journal, 420 (2021) 129556.
- [205]M. Reddeppa, N.T. KimPhung, G. Murali, K.S. Pasupuleti, B.-G. Park, I. In, M.-D. Kim, Interaction activated interfacial charge transfer in 2D g-C₃N₄/GaN nanorods heterostructure for self-powered UV photodetector and room temperature NO₂ gas sensor at ppb level. Sensors and Actuators B: Chemical, 329 (2021) 129175.
- [206]Z. Liu, C. Wang, Z. Zhu, Q. Lou, C. Shen, Y. Chen, J. Sun, Y. Ye, J. Zang, L. Dong, Wafer-scale growth of two-dimensional graphitic carbon nitride films. Matter, 4 (2021) 1625-1638.
- [207]V. Manikandan, S. Athithya, S. Harish, J. Archana, M. Navaneethan, Solution-processed UV–visible photodetector based on Ag enfold g-C₃N₄ nanosheets with MWCNT nanotube hybrid nanostructure. Optical Materials, 134 (2022) 113086.
- [208]X. Chen, X. Yang, Q. Lou, Y. Tian, Z. Liu, C. Lv, Y. Chen, L. Dong, C.-X. Shan, Ultrasensitive broadband position-sensitive detector based on graphitic carbon nitride. Nano Research, 16 (2023) 1277-1285.
- [209]W. Song, J. Wei, J. Lv, X. Cao, Y. Sun, S. Li, X. He, Sulfur-doped g-C₃N₄/GaN nn heterojunction for high performance low-power blue-ultraviolet photodetector with ultra-high on/off ratio and detectivity. Carbon, 228 (2024) 119438.
- [210]X. Zhao, X. Yan, X. Shao, K. Li, M. Sun, X. Ji, H. Lu, Y. Liu, Construction of g-C₃N₄/SnSe₂/H-TiO₂ Ternary Heterojunction for High-Performance Photodetectors. ECS Journal of Solid State Science and Technology, 13 (2024) 065010.
- [212]M.A.K. Purbayanto, M. Chandel, M. Makowski, M.D. Birowosuto, V. Montes-García, K. Prenger, A. Ciesielski, M. Naguib, A.M. Jastrzębska, Unraveling the Role of Interfacial Charge Transfer on Photoactivity and Anomalous Luminescence Quenching of V₄C₃Tₓ/Protonated g-C₃N₄ Heterostructures. ACS Applied Materials & Interfaces, 17 (2025) 17454-17464.
- [213]S. Kumari, J. Mahanta, M.K. Singh, A. Suhail, N.R. Peela, D.K. Singh, Graphitic carbon nitride-based high-performance Organic Field-Effect Transistor and photodetector. Diamond and Related Materials, 155 (2025) 112289.
- [214]R.K. Prasad, D.K. Singh, Melamine-Based Graphitic C3N4/p-Silicon Heterostructure Photodetector: Effect of g-C₃N₄ Growth Time on Performance. Journal of Electronic Materials, (2025) 1-10.
- [215]Z.-L. Yang, Z.-Y. Zhang, W.-L. Fan, C.-S. Hu, L. Zhang, J.-J. Qi, High-performance g-C₃N₄ added carbon-based perovskite solar cells insulated by Al2O3 layer. Solar Energy, 193 (2019) 859-865.
- [216]X. Wei, X. Liu, H. Liu, S. Yang, H. Zeng, F. Meng, X. Lei, J. Liu, Exfoliated graphitic carbon nitride self-recognizing CH₃NH₃PbI₃ grain boundaries by hydrogen bonding interaction for improved perovskite solar cells. Solar Energy, 181 (2019) 161-168.
- [217]W. Cao, K. Lin, J. Li, L. Qiu, Y. Dong, J. Wang, D. Xia, R. Fan, Y. Yang, Iodine-doped graphite carbon nitride for enhancing photovoltaic device performance via passivation trap states of triple cation perovskite films. Journal of Materials Chemistry C, 7 (2019) 12717-12724.
- [218]L.L. Jiang, Z.K. Wang, M. Li, C.C. Zhang, Q.Q. Ye, K.H. Hu, D.Z. Lu, P.F. Fang, L.S. Liao, Passivated perovskite crystallization via g-C₃N₄ for high-performance solar cells. Advanced Functional Materials, 28 (2018) 1705875.
- [219]Z. Li, S. Wu, J. Zhang, Y. Yuan, Z. Wang, Z. Zhu, Improving photovoltaic performance using perovskite/surface-modified graphitic carbon nitride heterojunction. Solar RRL, 4 (2020) 1900413.
- [220]Z. Liu, S. Wu, X. Yang, Y. Zhou, J. Jin, J. Sun, L. Zhao, S. Wang, The dual interfacial modification of 2D g-C₃N₄ for high-efficiency and stable planar perovskite solar cells. Nanoscale Advances, 2 (2020) 5396-5402.
- [221]J.-F. Liao, W.-Q. Wu, J.-X. Zhong, Y. Jiang, L. Wang, D.-B. Kuang, Enhanced efficacy of defect passivation and charge extraction for efficient perovskite photovoltaics with a small open circuit voltage loss. Journal of Materials Chemistry A, 7 (2019) 9025-9033.
- [222]P. Liu, Y. Sun, S. Wang, H. Zhang, Y. Gong, F. Li, Y. Shi, Y. Du, X. Li, S.-s. Guo, Two dimensional graphitic carbon nitride quantum dots modified perovskite solar cells and photodetectors with high performances. Journal of Power Sources, 451 (2020) 227825.
- [223]J. Chen, H. Dong, L. Zhang, J. Li, F. Jia, B. Jiao, J. Xu, X. Hou, J. Liu, Z. Wu, Graphitic carbon nitride doped SnO₂ enabling efficient perovskite solar cells with PCEs exceeding 22%. Journal of Materials Chemistry A, 8 (2020) 2644-2653.