betaFeedback

WorksPhysics and Astronomy

Getting the manifold right: The crucial role of orbital resolution in DFT+U for mixed d-f electron compounds

Abstract

Accurately modeling compounds with partially filled dd and ff shells remains a hard challenge for density-functional theory, due to large self-interaction errors stemming from local or semi-local exchange-correlation functionals. Hubbard UU corrections can mitigate such errors, but are often detrimental to the description of hybridized states, leading to spurious force contributions and wrong lattice structures. Here, we show that careful disentanglement of localized and delocalized states leads to accurate predictions of electronic states and structural distortions in ternary monouranates (AUO4_4, where A represents Mn, Co, or Ni), for which standard UU corrections generally fail. Crucial to achieving such accuracy is a minimization of the mismatch between the spatial extension of the projector functions and the true coordination geometry. This requires Wannier-like alternatives to atomic-orbital projector functions, or corrections of Hubbard manifolds exclusively comprised of the most localized A-3d3d, U-5f5f and O-2p2p orbitals. These findings open up the computational prediction of fundamental properties of actinide solids of critical technological importance.

Contributed Equally

Introduction

Computational investigations play a crucial role in the research workflow on energy materials.[1] This is especially the case for nuclear materials, where direct measurements are often limited to surrogate systems in which hazardous actinide elements are replaced by harmless lanthanides.[2, 3] However, the key elements that determine the performance of electrocatalysts, batteries or nuclear fuel and waste, featuring partially filled dd and ff shells – including transition metals and actinides – pose a challenge for density-functional theory (DFT), the main tool for prediction of the structure and electronic properties of functional materials. This is because the (typically localized) dd and ff electrons are particularly prone to spurious self-interaction errors (SIEs) that arise from the inexact cancellation of the Hartree term by approximate exchange-correlation (xc) functionals.[4, 5, 6] As a result, several features of exact DFT are not correctly reproduced by LDA and GGA-type xc functionals: the piecewise linearity (PWL) of the total energy with respect to fractional addition or removal of charge,[4, 7, 8] the existence of a derivative discontinuity,[9, 10] and the correct asymptotic decay of the Kohn-Sham (KS) potential.[11] These shortcomings ultimately compromise the prediction of several fundamental properties, including lattice symmetries, bond strengths and band gaps. For instance, GGA functionals predict UO2\mathrm{UO}_{2} —the main form of nuclear fuel— to be metallic, whereas it is in fact a Mott insulator with a band gap of ∼2\sim2 eV.[12]

One way to mitigate SIEs is the DFT+UU framework.[13, 14, 15, 16] In this approach, a corrective on-site term scaled by a Hubbard parameter UU is applied to a predefined electronic subspace dubbed Hubbard manifold in order to remove (locally) the spurious quadratic deviations from PWL,[17] while also reintroducing a derivative discontinuity. Note that due to its history as a remedy to the unsatisfactory performance of (semi-)local functionals in predicting the electronic structure of strongly correlated materials, DFT+UU is often understood as a method that corrects for strong electronic correlations not well captured by DFT; however, this view has been increasingly challenged.[17, 18, 19] In the commonly used approximation, the Hubbard manifold encompasses the entirety of valence dd and ff shells, and all magnetic quantum orbitals of these shells are corrected using a shell-averaged scalar Hubbard UU parameter. This approximation implicitly relies on the assumption that all dd and ff states are localized and therefore display only weak interactions with the surrounding electron bath. To apply the correction, the orbital occupations within the Hubbard manifold are determined by projecting the Kohn–Sham wavefunctions onto a suitable mathematical representation, henceforth referred to as Hubbard projectors. A straightforward and widely used choice for this representation consists in atomic-like orbitals parameterized based on solutions of radial Schrödinger equations for isolated atoms. Shell-averaged DFT+UU with such atomic orbital projectors has been successfully applied to study the electronic and ionic structures of a variety of solids bearing lanthanides and actinides. [20, 21, 22, 23]

Geological disposal of nuclear waste is a challenge faced by many countries that utilize nuclear technology. [24] A particular concern is the formation of secondary phases between disposed UO2_2-based nuclear fuel, fission products, and near-field elements. A notable example of these secondary phases is provided by ternary monouranates AUO4_4, with A representing a bi- or trivalent metal. [25] Such materials are often studied using DFT+UU schemes. However, for AUO4_4 compounds with A = Ni, Mg, Co, Mn, the shell-averaged approach was shown to incorrectly stabilize a higher-symmetry CmmmCmmm structure instead of the experimentally observed IbmmIbmm phase. [26] The failure of shell-averaged DFT+UU was attributed to a significant overestimation of dd and ff orbital occupancies due to the use of atomic orbital Hubbard projectors, which led to large artificial Hubbard energy contributions. [26] To demonstrate this, the authors set the Hubbard energy term EUE_U to zero, and with this recovered the experimentally observed IbmmIbmm structures. Only for A = Cd did the CmmmCmmm structure remain stable, again in line with experimental results. Improvements similar to the EU=0E_U = 0 procedure were obtained by replacing the atomic-like Hubbard projectors with Wannier-type ones (hereafter denoted as the DFT+UU(WF) method). Wannier-type Hubbard projectors yield more realistic (i.e., closer to integer values) dd and ff occupations, so that the spurious Hubbard energy contributions vanish naturally. The DFT+UU(WF) method has also proven valuable in other systems containing actinides and transition-metal (TM) atoms, offering substantial improvements in the predicted electronic structure, thermodynamic properties, and X-ray spectra.[22, 27, 28, 29, 30]

Despite these advantages, DFT+UU(WF) comes with practical limitations: the construction of Wannier functions is sensitive to initialization choices (energy windows, number of bands, disentanglement procedure), and—depending on the type of Wannier function used—the direct evaluation of forces and stresses is not yet implemented in the codes. An alternative approach that also seeks to avoid the overcorrections of shell-averaged DFT+UU is orbital-resolved DFT+UU (OR-DFT+UU).[19] This method is grounded in the insight that the degree of electron localization (and thus the severity of SIEs) can vary significantly at the intra-shell level, i.e., between different nlmnlm orbitals of the same nlnl subshell.[31] OR-DFT+UU provides an ad-hoc solution that enables the definition of pinpoint Hubbard manifolds spanned by simple atomic orbital projectors for compounds where shell-averaged DFT+UU fails (Refs. 19,32–35 report examples of such failures).

In this study, we apply various orbital-resolved Hubbard manifolds to the ternary TM monouranates β\beta-NiUO4_4, CoUO4_4 and MnUO4_4, aiming to reproduce the experimentally observed structural distortions without imposing additional constraints on the Hubbard energy or introducing other empirical assumptions or modifications. All Hubbard UU parameters are computed from first principles using the linear-response constrained DFT approach (LR-cDFT).[17, 33] By testing different orbital-resolved Hubbard manifolds (determined through careful analyses of orbital occupations), we aim at identifying the root cause of the failure of shell-averaged DFT+UU in these systems. Finally, we assess how the definition of the Hubbard manifold and the choice of projector functions influence the prediction of structural observables and clarify under which conditions OR-DFT+UU can serve as a robust and practical alternative to the DFT+UU(WF) framework for modeling dd and ff electron systems with strong covalent bonding.

Materials and methods

Computational details

DFT calculations were performed using the pw.x code contained in the QUANTUM ESPRESSO package.[36, 37, 38] The calculation setup was chosen to match the computational setup used by Murphy et al. This included employing the PBEsol exchange-correlation functional[9] and ultrasoft pseudopotentials (self-generated using the Vanderbilt code[39]) with a plane-wave energy cutoff of 50 Ry and a charge density cutoff of 200 Ry. Structural relaxations were carried out until the total energy and atomic forces converged below 10−510^{-5} Ry and 10−410^{-4} Ry/Bohr, respectively. All calculations were spin-polarized within the collinear approximation (assuming ferromagnetic order of the TM sites) and used a tight convergence threshold for electronic total-energy self-consistency of 10−810^{-8} Ry. Projected density of states (PDOS) calculations were performed with a Gaussian broadening of 0.0035 Ry. Moreover, the option diag_basis = .true. in the projwfc.x code was enabled to rotate atomic orbitals into the eigenbasis of the occupation matrix, thus aligning orbital projections with the local symmetry and facilitating a clearer identification of orbital character.[40] An additional analysis of the electronic structure of NiUO4\mathrm{NiUO_4} employed the linear combination of fragment orbitals method[41] as implemented in the LOBSTER tool,[42] for which a single calculation had to be re-done using PAW-type pseudopotentials (taken from the PSlibrary).

For all DFT+UU calculations, we applied the formulation of Dudarev et al. that seeks to mitigate SIEs by enforcing (locally) PWL of the total energy with respect to fractional orbital occupations.[17, 18] Note that in this work, “DFT+UU” refers exclusively to PBEsol+UU. We used both shell-averaged and orbital-resolved Hubbard manifolds.[19, 32, 33] The OR-DFT+UU energy functional is given by

EDFT+U=EDFT+EU(1)E_{\mathrm{DFT}+U}=E_{\mathrm{DFT}}+E_U \tag*{(1)}

where

EU=∑I,σ∑i=12l+1UiI2λiIσ(1−λiIσ),(2)E_U = \sum_{I,\sigma}\sum_{i=1}^{2l+1} \frac{U_i^I}{2}\lambda_i^{I\sigma}(1-\lambda_i^{I\sigma}), \tag*{(2)}

and the corresponding Hubbard potential is

VUσ=∑I∑i=12l+1UiI(12−λiIσ)∣ϕiI⟩⟨ϕiI∣.(3)V_U^\sigma= \sum_I\sum_{i=1}^{2l+1} U_i^I\left(\frac{1}{2}-\lambda_i^{I\sigma}\right)|\phi_i^I\rangle\langle\phi_i^I|. \tag*{(3)}

Here, UiIU_i^I is the Hubbard parameter corresponding to the (diagonal) orbital {ϕiI}\{\phi_i^I\} of atom II (the principal and angular quantum numbers nlnl are omitted for clarity), σ\sigma is the spin index, and λiIσ\lambda_i^{I\sigma} are the eigenvalues of the occupation matrix, computed by solving the eigenvalue problem ∑m′nmm′Iσνm′,iIσ=λiIσνm,iIσ\sum_{m'} n_{mm'}^{I\sigma}\nu_{m',i}^{I\sigma}=\lambda_i^{I\sigma}\nu_{m,i}^{I\sigma}, where νIσ\nu^{I\sigma} are the corresponding eigenvectors and nmm′Iσn_{mm'}^{I\sigma} are the elements of the occupation matrix for the magnetic quantum numbers mm and m′m'.

In the shell-averaged case, both expressions simplify as UiI=UIU_i^I=U^I for all ii. Orthogonalized atomic orbitals (OAO) {ϕmI}\{\phi_m^I\} were employed as Hubbard projector functions. In (3), these orbitals are written in their diagonal basis {ϕiI}\{\phi_i^I\}, which can be back-transformed into the non-diagonal setting by substituting ∣ϕiIσ⟩=∑mνmiIσ∣ϕmI⟩|\phi_i^{I\sigma}\rangle=\sum_m\nu_{mi}^{I\sigma}|\phi_m^I\rangle. We highlight that the Hubbard projector functions are independent of spin; however, for each spin channel, they are rotated separately using the corresponding eigenvectors of the spin-resolved occupation matrix.

OAO are closely related to the nonorthogonalized projectors used by Murphy et al., but prevent the double-counting of Hubbard corrections in regions where projector orbitals overlap. [43, 44] With these projector functions, the occupation matrix nn is computed as

nmm′Iσ=∑k,νfk,ν⟨ψk,ν∣ϕm′I⟩⟨ϕmI∣ψk,ν⟩,(4)n_{mm'}^{I\sigma}=\sum_{\mathbf{k},\nu}f_{\mathbf{k},\nu}\langle\psi_{\mathbf{k},\nu}|\phi_{m'}^I\rangle\langle\phi_m^I|\psi_{\mathbf{k},\nu}\rangle, \tag*{(4)}

where mm and m′m' are magnetic quantum numbers, and ψk,νσ\psi_{\mathbf{k},\nu}^\sigma are the KS wavefunctions at point k\mathbf{k} with the band index ν\nu and spin σ\sigma (additional operators arise when using ultrasoft and PAW basis sets[44]). All on-site UU parameters were evaluated from first principles using the LR-cDFT approach introduced in [17] and extended to the orbital-resolved formalism in Ref.

  1. It is important to note that shell-averaged Hubbard UU values are not equivalent to the arithmetic mean of the orbital-resolved UU parameters associated with a given shell. [19] Instead, the shell-averaging is performed at level of the response to the perturbation, which frequently results in shell-averaged UU values exceeding both the individual orbital-resolved values and their arithmetic mean. [33] In the LR-cDFT calculations, perturbations of magnitude α=±0.05\alpha= \pm0.05 eV were applied to the respective manifold of a single atom in a 2×2×22 \times2 \times2 supercell that was created to avoid unphysical interactions of the perturbed state with its periodic images. It is important to note that the Quantum ESPRESSO implementation of LR-cDFT ensures that only the DFT part of the linear response is assessed, as the potential derived from the Hubbard functional is kept fixed during perturbative calculations. [45, 46] The Brillouin zone was sampled using Γ\Gamma-centered 4×4×44 \times4 \times4 and 2×2×22 \times2 \times2 Monkhorst–Pack grids for the unit cell and the supercell calculations, respectively. As the responses to perturbations depend on the electronic structure (which in turn depends on the ionic structure), calculated Hubbard parameters can change when transitioning from a DFT ground state to a DFT+UU one. While there exist procedures that self-consistently derive the Hubbard parameters and optimize the ionic structure, [45, 47] we did not adopt such an approach here. Instead, all LR-cDFT calculations were carried out in a “one-shot” manner on top of DFT+UU ground states obtained using an empirical guess for the UU values: UNi−3d=UCo−3d=4.0U_{\mathrm{Ni-3d}} = U_{\mathrm{Co-3d}} = 4.0 eV, UMn−3d=2.0U_{\mathrm{Mn-3d}} = 2.0 eV, UU−5f=2.0U_{\mathrm{U-5f}} = 2.0 eV, and UO−2p=1.0U_{\mathrm{O-2p}} = 1.0 eV. This procedure was previously shown to yield Hubbard parameters typically within δU=USC−U≤0.1\delta U = U_{\mathrm{SC}} - U \le0.1 eV (where USCU_{\mathrm{SC}} is the self-consistent value), provided the input structure does not deviate strongly from the final relaxed one. [48] We have confirmed that this rapid convergence also holds for the AUO4_4 compounds discussed in the following (Table S3).

Characterization of the structural distortions

The crystal structure of Ibmm ternary monouranates is similar to rutile (TiO2_2, space group P42/mnmP4_2/mnm), [49] featuring parallel one-dimensional chains of edge-sharing AO6_6 and UO6_6 octahedra that run along the [1] direction (Figure 1a). Each U atom is coordinated by two O1 atoms in a trans configuration and four equatorial O2 atoms, whereas the reverse arrangement occurs in the AO6AO_6 octahedra. A distinctive feature of the Ibmm structure are strongly hybridized uranyl O1=U=O1 moieties, which display significantly shorter bond lengths than the U–O2 bonds.[49] These moieties are associated with structural distortions[50]—namely octahedral tilting (θ\theta, Figure 1b) and off-centering distortions of uranium and oxygen atoms (δ\delta, Figure 1c)—with respect to the higher-symmetry Cmmm structure of CdUO4CdUO_4. The tilting angle θ\theta measures the deviation of the O2 atoms from collinearity with the b-axis and is given by

θ=90∘−tan⁡−1[(2x−1)a2zc],(5)\theta= 90^\circ- \tan^{-1}\left[\frac{(2x-1)a}{2zc}\right], \tag*{(5)}

where xx and zz are the fractional coordinates of the O2 atoms, and aa and cc are lattice parameters. The uranium off-centering δU\delta_\mathrm{U} and the oxygen off-centering δO\delta_\mathrm{O} are defined as

Image not extracted

Figure 1. (a) Crystal structure of AUO4AUO_4 in the orthorhombic Ibmm space group. Oxygen atoms O1 and O2 are shown in red and pink, respectively. (b) Schematic representation of the AO6AO_6 tilt angle θ\theta around the b-axis, quantifying deviations from the idealized Cmmm symmetry. The UO6UO_6 octahedra is shown in cyan and the AO6AO_6 octahedra in purple. (c) The uranium off-centering δU\delta_\mathrm{U} and axial oxygen off-centering δO\delta_\mathrm{O}, measured relative to the ideal Cmmm atomic positions. The high-symmetry Cmmm reference structure is indicated by dashed gray lines.

the displacements of the U and O2 atoms from the center of the adjacent AO6\mathrm{AO}_{6} octahedron, measured along the [100] direction (Figure 1c). Specifically, δU\delta_{\mathrm{U}} and δO\delta_{\mathrm{O}} correspond to the differences between the atomic coordinates of U and O2, and the coordinate of the octahedral center, respectively, all projected onto the [100] direction, capturing the structural distortion along the primary axis of asymmetry. Displacements along other directions are neglected.

Results and discussion

Response of the structure to variations in UU

To test how AUO4\mathrm{AUO}_{4} structures responds to shell-averaged Hubbard UU corrections, we performed geometry optimizations on β\beta-NiUO4\mathrm{NiUO}_{4} in which the values of UNi−3dU_{\mathrm{Ni-3d}}, UU−5fU_{\mathrm{U-5f}}, and UO−2pU_{\mathrm{O-2p}} were varied systematically. This compound was selected for the analysis because it displays the most distorted structure. The results, presented in Figure 2, show a strong and monotonic dependence of both the unit cell volume VV and the internal distortion parameter δO\delta_{\mathrm{O}} on the applied UU values. Specifically, increasing UNi−3dU_{\mathrm{Ni-3d}} from 0 to 8 eV results in a 4.8% expansion of the volume and a 27% reduction in δO\delta_{\mathrm{O}} (Figure 2a). Similarly, increasing UU−5fU_{\mathrm{U-5f}} from 0 to 8 eV leads to a 3.3% volume expansion and a pronounced reduction in δO\delta_{\mathrm{O}} by 58% (Figure 2b), which reflects the crucial role of the U-5f orbitals for the strongly covalent hybridized axial O1=U=O1\mathrm{O1=U=O1} bonds. In contrast, applying UU corrections to the O-2p shell produces a subtler structural response, as increasing UO−2pU_{\mathrm{O-2p}} from 0 to 8 eV entails only a minimal increase in unit cell volume (0.8%) and a reduction in δO\delta_{\mathrm{O}} by 20% (Figure 2c). The experimental value of δO\delta_{\mathrm{O}} is best reproduced at UNi−3d≈3U_{\mathrm{Ni-3d}} \approx3 eV, UU−5f≈1.5U_{\mathrm{U-5f}} \approx1.5 eV and UO−2p≈0U_{\mathrm{O-2p}} \approx0 eV, whereas the volume is overestimated for all UU values, including 0 eV. Qualitatively similar trends are observed for MnUO4\mathrm{MnUO}_{4} and CoUO4\mathrm{CoUO}_{4}, suggesting that the IbmmIbmm structure of AUO4\mathrm{AUO}_{4} compounds manifests a high sensitivity to shell-averaged Hubbard UU corrections; at least when the latter are applied through (ortho-)atomic projector functions. For ranges of Hubbard UU values that predict correct electronic band gaps (e.g., U>6U > 6 eV for Ni-3d) [51] the magnitude of the distortions is severely underestimated, especially since the effects of UNi−3dU_{\mathrm{Ni}-3d}, UU−5fU_{\mathrm{U}-5f}, and UO−2pU_{\mathrm{O}-2p} can be expected to stack (albeit not necessarily in a linear way).

Image not extracted

Figure 2. Impact of the Hubbard parameters (a) UNi−3dU_{\mathrm{Ni}-3d} (at fixed UU−5f=2 eVU_{\mathrm{U}-5f}=2\,\mathrm{eV} and UO−2p=1 eVU_{\mathrm{O}-2p}=1\,\mathrm{eV}), (b) UU−5fU_{\mathrm{U}-5f} (at fixed UNi−3d=4 eVU_{\mathrm{Ni}-3d}=4\,\mathrm{eV} and UO−2p=1 eVU_{\mathrm{O}-2p}=1\,\mathrm{eV}), and (c) UO−2pU_{\mathrm{O}-2p} (at fixed UNi−3d=4 eVU_{\mathrm{Ni}-3d}=4\,\mathrm{eV} and UU−5f=2 eVU_{\mathrm{U}-5f}=2\,\mathrm{eV} fixed) on the cell volume and the magnitude of the oxygen distortion parameter in β-NiUO4_4. Solid lines serve as a guide for the eye.

Murphy et al. explained this inconsistent behavior of the UU correction with “unrealistic” fractional occupation numbers of unoccupied dd and ff orbitals resulting from the use of atomic orbital projectors.[26] Due to the functional form of Eq. (2), fractional occupation numbers induce punitive Hubbard energy contributions that grow quadratically with increasing distance from λ=0\lambda= 0 or λ=1\lambda= 1 (i.e., EUE_U is maximized for half-occupied orbitals). Therefore, the minima of the potential energy surface shift towards configurations in which EUE_U is reduced. For (ortho)-atomic projector functions, this entails the observed volume increase—since larger bond lengths lead to decreased occupations of formally empty orbitals—and causes a linearization of the polyhedral bond angles that reduces the magnitudes of δU\delta_U and δO\delta_O. In Ref. 26 these spurious side-effects of UU corrections were mitigated by using WFs as Hubbard projectors, which yielded occupation numbers much closer to zero or one, or by setting EU=0E_U = 0 when using atomic Hubbard projectors. The fact that the problematic contributions to EUE_U appear to stem from only a few (formally unoccupied) states raises the question of whether there exists an orbital-resolved Hubbard manifold based on (ortho)-atomic orbital projectors that reduces the sensitivity of the structural parameters to the UU values and allows for accurate predictions of the structural distortions without resorting to artificial modifications of the energy functional.

Determination of orbital-resolved Hubbard manifolds

To identify such orbital-resolved Hubbard manifolds, we analyze the individual orbitals of the A-3d3d, U-5f5f and O-2p2p shells in terms of overlap and occupation patterns. We emphasize that the consideration of O-2p2p states for the Hubbard manifold is natural because of their potential frontier-state character and high degree of localization.[52]

Group-theoretical analysis of orbital splitting

Before turning to practical calculations, we review the ligand-field-induced splitting of the A-3d3d and U-5f5f orbitals from a group theory perspective. In the IbmmIbmm crystal structure, the A and U cations occupy the 4a and 4e Wyckoff positions, corresponding to C2hC_{2h} and C2vC_{2v} site symmetries, respectively. The A-3d3d orbitals transform as two one-dimensional (non-degenerate) irreducible representations: a 3Ag3A_g representation with contributions from dx2−y2d_{x^2-y^2}, dz2d_{z^2}, and dxzd_{xz}, and a 2Bg2B_g manifold associated with the dxyd_{xy} and dyzd_{yz} atomic orbitals. The lobes of dxyd_{xy}, dxzd_{xz} and dz2d_{z^2} lie between the A–O bond axes and should interact only very weakly with the O-2p2p orbitals via π\pi overlap (Figure S7). In contrast, the lobes of dx2−y2d_{x^2-y^2} and dyzd_{yz} run along the equatorial and axial A–O bonds, respectively, giving rise to strong σ\sigma overlap. Therefore, despite the significant distortions of the AO6_6 octahedra, the crystal-field splitting pattern of the A-3d3d shell can be expected to resemble that of a perfect octahedron with OhO_h site symmetry. We will thus refer to the three lowest-lying orbitals as t~2g\widetilde{t}_{2g}, and we designate the two higher-energy orbitals as e~g\widetilde{e}_g, where the tilde denotes the approximate nature of this assignment, since all of the states are non-degenerate in energy.

Moving on, the 5f5f orbitals of U split into seven non-degenerate levels transforming as 2A12A_1, 1A21A_2, 2B12B_1, and 2B22B_2. The A2A_2 representation can be expected to show very little overlap, as the lobes of the corresponding fxyzf_{xyz} orbital point away from all bond axes (Figure S7). All other representations are linear combinations of two atomic orbitals and exhibit varying degrees of overlap with adjacent O–sp2sp^2 hybrid orbitals; with the highest energy contributions likely being due to fy(3x2−y2)f_{y(3x^2-y^2)} and fxz2f_{xz^2}, whose lobes follow the axial O1–U–O1 and the equatorial O2–U–O2 bond axes, respectively.

Analysis of the electronic occupations

Next, we assess the extent of orbital hybridization by carrying out DFT+UU calculations with shell-averaged trial UU values and analyze the resulting electronic structures and orbital occupations. For all trial calculations, we employed UU−5f=2.0 eVU_{\mathrm{U-5f}} = 2.0\,\mathrm{eV} and UO−2p=1.0 eVU_{\mathrm{O-2p}} = 1.0\,\mathrm{eV}.

The Hubbard parameters used for the A-site 3d3d shells were system-specific: UNi−3d=4.0 eVU_{\mathrm{Ni-3d}} = 4.0\,\mathrm{eV}, UMn−3d=2.0 eVU_{\mathrm{Mn-3d}} = 2.0\,\mathrm{eV}, and UCo−3d=4.0 eVU_{\mathrm{Co-3d}} = 4.0\,\mathrm{eV}. These comparatively low trial parameters were chosen to avoid analyzing an already overcorrected electronic structure, as spurious effects due to shell-averaged Hubbard UU corrections often set in at U>4 eVU > 4\,\mathrm{eV}. [19, 53] The parameter UMn−3dU_{\mathrm{Mn-3d}} was assigned a smaller value than UNi−3dU_{\mathrm{Ni-3d}} and UCo−3dU_{\mathrm{Co-3d}} because previous studies indicate that the Mn-3d3d shell is often less affected by SIEs than Ni-3d3d and Co-3d3d.[51]

The eigenvalues of the occupation matrix, presented in Table 1, clearly reflect the crystal-field splitting between the e~g\widetilde{e}_{g} and t~2g\widetilde{t}_{2g} states of Ni in β\beta-NiUO4_4. While eigenstates ν3\nu_3 to ν5\nu_5 are fully occupied (λ>0.98\lambda> 0.98) in both spin channels, λ1↑\lambda_1^{\uparrow} and λ2↑\lambda_2^{\uparrow} are significantly closer to zero (albeit still well above 0.1), indicating formally empty (e~g\widetilde{e}_{g}) states. The remaining eigenstates ν3↓\nu_3^{\downarrow} to ν5↓\nu_5^{\downarrow} are again fully occupied, which is consistent with the minority-spin t~2g\widetilde{t}_{2g} states of a high-spin d8d^8 configuration. This assignment is confirmed by the projected density of states (PDOS) shown in Figure 3a, where it can be recognized that the Ni contributions to the conduction bands are exclusively composed of e~g\widetilde{e}_{g}-like ν1↑\nu_1^{\uparrow} and ν2↑\nu_2^{\uparrow} states (Figure 3e). The occupancies of the 3d3d orbitals of Mn2+^{2+} and Co2+^{2+} in MnUO4_4 and CoUO4_4 show a qualitatively very similar trend (Table S1), and are in line with the expected respective d5d^5 and d7d^7 high-spin configurations that were also found by Murphy et al.. In all of the three materials, the 3d3d shells host formally empty yet significantly occupied e~g\widetilde{e}_{g}-like eigenstates in the spin-minority manifold that are clearly distinguishable from other empty states by virtue of their elevated eigenvalues (λ>0.1\lambda> 0.1), in the PDOSs (Figures S1 and S2) and when visualized in real space (Figure S8). While it is generally desirable to correct all states contributing to the frontier orbitals, here, we chose to exclude the e~g\widetilde{e}_{g}-like eigenstates from the Hubbard manifold because their elevated occupation eigenvalues (stemming from hybridization between A-e~g\widetilde{e}_{g} and ligand pp orbitals[54]) give rise to spurious energy and force contributions. [19, 32] We emphasize that this can be seen as an ad hoc solution to the unsatisfactory projectability of the e~g\widetilde{e}_{g} manifold when atomic-like projectors are employed. Another solution (which we do not follow here) is to switch to a Wannier function projector basis, as practiced in Ref. 26 (see the SI therein for a comparison of WF vs. NAO occupation numbers). A possible orbital-resolved manifold for the 3d3d shells therefore consists of the t~2g\tilde{t}_{2g} states, which are reasonably represented by the (ortho-)atomic projector orbitals and thus exhibit occupation eigenvalues close to either 0 or 1. This target subspace includes ν3\nu_{3}–ν5\nu_{5} for β\beta-NiUO4_4 (both spin channels), ν3↑\nu_{3}^{\uparrow}–ν5↑\nu_{5}^{\uparrow} and ν1↓\nu_{1}^{\downarrow}–ν3↓\nu_{3}^{\downarrow} for MnUO4_4, and ν3↑\nu_{3}^{\uparrow}–ν5↑\nu_{5}^{\uparrow}, ν1↓\nu_{1}^{\downarrow}, as well as ν4↓\nu_{4}^{\downarrow}–ν5↓\nu_{5}^{\downarrow} for CoUO4_4. The assignment of the spin-majority eigenstates to either t~2g\tilde{t}_{2g} or e~g\tilde{e}_{g} must rely on the eigenvectors, as the corresponding eigenvalues are all close to unity and thus do not allow for a distinction between the two manifolds. Despite their numerical full occupation, the spin-majority e~g\tilde{e}_{g}-like eigenstates were also removed from the Hubbard manifold because fully occupied states are still affected by the Hubbard correction via the potential shift of −U/2-U/2 resulting from Eq. (3). Moreover, an imbalanced correction of spin orbitals (i.e., correcting more spin-majority than spin-minority orbitals) would emulate a Hund JJ term, [55, 56] which might be useful for addressing fractional spin errors, but a systematic treatment of such effects would go beyond the scope of this study.

AtomSpinEigenvalueλ1\lambda_1λ2\lambda_2λ3\lambda_3λ4\lambda_4λ5\lambda_5λ6\lambda_6λ7\lambda_7
U↑0.0630.1070.1750.1960.2470.2850.417
↓0.0620.1080.1500.1650.2020.2410.378
Ni↑0.9720.9890.9920.9940.996--
↓0.1640.2210.9830.9870.991--
O1_1↑0.7480.7650.812----
↓0.7360.7660.810----
O2_2↑0.7440.7990.802----
↓0.7330.7590.799----

Table 1. Eigenvalues λi\lambda_i corresponding to respective eigenstates νi\nu_i in β-NiUO4_4, obtained from a DFT+UU calculation with trial Hubbard parameters UNi−3d=4.0U_{\mathrm{Ni-3d}} = 4.0 eV, UU−5f=2.0U_{\mathrm{U-5f}} = 2.0 eV and UO−2p=1.0U_{\mathrm{O-2p}} = 1.0 eV.

Image not extracted

Figure 3. Stacked projected density of states (PDOS) for (a) Ni-3dd, (b) U-5ff, and (c) O-2pp orbitals in β-NiUO4, obtained from trial DFT+UU calculations. Panels (d) and (e) show the integrated local density of states for the Ni-3dd energy intervals indicated by red and green shading in panel (a) at isovalues 0.0184 e−⋅A˚−3e^{-}\text{·}\mathring{\mathrm{A}}^{-3} and 0.0079 e−⋅A˚−3e^{-}\text{·}\mathring{\mathrm{A}}^{-3}, respectively.

For uranium, the PDOS indicates that most 5f5f contributions to the electronic structure are located in the conduction band (Figure 3b); however, the projected occupations of some eigenstates are significantly larger than zero despite the formal 5f05f^{0} configuration of U6+^{6+}. Particularly, the high-energy eigenstates ν5\nu_{5}, ν6\nu_{6} and ν7\nu_{7} exhibit eigenvalues above 0.2 (in both spin channels), with λ7\lambda_{7} growing as large as 0.45 in MnUO4_4 (Table 1 and S1). Given the continuous nature of the U-5f5f occupation spectrum, the definition of an orbital-resolved Hubbard manifold is somewhat ambiguous and cannot be guided by symmetry considerations alone. Based on their comparatively low occupation eigenvalues, we considered the four least-occupied eigenstates (ν1\nu_{1}–ν4\nu_{4}) to be sufficiently localized to be included in the Hubbard manifold, whereas ν5\nu_{5}–ν7\nu_{7} were not targeted by Hubbard corrections to avoid overcorrection due to heavy ligand admixture. To evaluate the robustness of our choice, we examined an alternative definition of the target subspace in which ν5\nu_{5} was also included. This variation led to only minor changes in the computed values of the UU parameters (Table S2).

While partially filled dd and ff shells are typically the focus of Hubbard UU corrections, the possibility that O-2pp states might also be localized[52] (and thus require correction of SIEs) is often overlooked. In the present ternary monouranates, the (distorted) trigonal planar coordination geometries of both O sites, with bond angles between 105° and 140°, suggest the presence of three sp2sp^{2} hybrid orbitals mediating the interactions between the oxygen atom and the metal centers, and one lone-pair orbital. The sp2sp^{2} hybrid orbitals display significant σ\sigma-overlap with neighboring A- and U-site cations (for example, Figure 3e shows a σd−p∗\sigma^{*}_{d-p} orbital forming part of the lowest conduction bands), while the unhybridized px/pyp_{x}/p_{y} orbitals (depending on whether the site is O1 or O2) interact only slightly with the neighboring sites via π\pi overlap. The occupation eigenvalues of O-2p2p are far from one, ranging from λ≈0.73\lambda\approx0.73 to 0.82 (Table 1 for β\beta-NiUO4_4, Table S1 for MnUO4_4 and CoUO4_4). However, there is a noticeable gap between the numerical values of λ2\lambda_2 (≈0.76\approx0.76) and λ3\lambda_3 (≈0.80\approx0.80), except for the spin-up manifold of O2 where both values are similar. Careful analysis of the PDOS shows that energy ranges where A-t2gt_{2g} states dominate the electronic structure (e.g., the red shaded area in Figure 3a) also show large contributions due to ν3\nu_3 of O-2p2p. By visualizing the eigenstates of the occupation matrix (Figure S8), it becomes evident that ν3\nu_3 corresponds to the nominally unhybridized pxp_x (pyp_y) orbital of O1 (O2). We argue that the orbital-resolved Hubbard manifold of O should comprise only this eigenstate, which exhibits weaker hybridization and a more atomic-like character. In contrast, the sp2sp^2-hybridized states are improperly represented by (linear combinations of) 2p2p OAOs (Figure S7), potentially rendering a correction of SIEs through Hubbard UU terms difficult. This assessment is further backed by the orbital-energy diagram of the NiO6_6 octahedron depicted in Figure 4, where it can be seen that a large number of symmetry-adapted linear combinations (SALCs) remain purely oxygenic. These ungerade states (e.g., 6Au6A_u, 9Bu9B_u) account for most of the levels just below the valence-band maximum, are non-bonding to weakly antibonding (Figure S9), and indeed show a strong atomic-like pp orbital character. On the other hand, the O-2p2p contributions to the 11Ag11A_g frontier orbital, which is an antibonding dd-pp σ∗\sigma^* molecular orbital (MO), display heavy admixture with Ni-dd orbitals, highlighting the difficulty of representing these states with a conventional (ortho-)atomic projector basis. For this reason ν1\nu_1 and ν2\nu_2 were not included in the orbital-resolved Hubbard manifold of O-2p2p, whereas ν3\nu_3 was.

Image not extracted

Figure 4. Molecular orbital (MO) diagram of an NiO6_6 octahedron in NiUO4_4 indicating the relative TM-3d3d vs. O-2p2p character of the MOs on the x-axis. The insets show the MOs corresponding to a few irreducible representations of interest. Data was generated by applying the linear combination of fragment orbitals method [41] implemented in LOBSTER [42] to the ground state of the trial DFT+UU(OAO) setup.

Evaluation of the Hubbard UU parameters

Having established orbital-resolved Hubbard manifolds for all frontier shells, we proceed to evaluate the respective Hubbard parameters from LR-cDFT and compare the outcome for different choices of Hubbard manifolds. In the traditional shell-averaged manifold, Hubbard corrections are applied to all A-3d3d, U-5f5f, and O-2p2p orbitals. The OR-DFT+UU approach systematically refines this definition of the target subspace through the following sequence of setups with increasingly selective manifolds: (1) The U-5f5f subspace is restricted to eigenstates ν1\nu_{1}–ν4\nu_{4}, while shell-averaged UU corrections are retained for the A-site 3d3d and O-2p2p states; (2) as in (1), but with an orbital-resolved UU applied to A-site t~2g\tilde{t}_{2g} states; (3) as in (2), but additionally limiting the O-2p2p correction to the pxp_x (O1) and pyp_y (O2) states.

Table 2 shows the UU values obtained for all choices of Hubbard manifolds and for each compound. While still falling in typical ranges, [48, 52] all shell-averaged UU values are comparatively large, and even exceed those reported by Murphy et al. by 1 to 3 eV. The reason for this discrepancy is likely rooted in the use of different Hubbard projector functions: while Murphy et al. employed nonorthogonalized atomic orbitals, here, OAO were used.

Moving forward to setup (1), excluding the most hybridized eigenstates ν5−ν7\nu_{5}-\nu_{7} from the Hubbard manifold of U-5ff prompts a strong and consistent reduction in the corresponding on-site interaction parameters of all three isomorphous compounds, from UU−5f≈3.8 eVU_{\mathrm{U-5f}} \approx3.8\,\mathrm{eV} to UU−5fν1−ν4≈1.4 eVU_{\mathrm{U-5f}\nu_{1}-\nu_{4}} \approx1.4\,\mathrm{eV}. At the same time, the A-3dd and O-2pp manifolds barely respond to the exclusion of ν5−ν7\nu_{5}-\nu_{7}, maintaining the same UU values as in the shell-averaged manifold.

A more drastic drop is observed in setup (2) for MnUO4_4 and CoUO4_4, where substituting the shell-averaged UA−3dU_{\mathrm{A-3d}} correction by a t~2g\widetilde{t}_{2g}-specific one leads to UU parameters as low as ≈1.3 eV\approx1.3\,\mathrm{eV} (MnUO4_4) and ≈2.3 eV\approx2.3\,\mathrm{eV} (CoUO4_4), respectively. The 1 eV1\,\mathrm{eV} difference between UMn−t~2gU_{\mathrm{Mn-}\widetilde{t}_{2g}} and UCo−t~2gU_{\mathrm{Co-}\widetilde{t}_{2g}} can be understood by recognizing that the t~2g\widetilde{t}_{2g} subspace of Mn contains three electrons [t~2g3(↑)][\widetilde{t}_{2g}^{3}(\uparrow)], whereas that of Co holds five [t~2g3(↑)[\widetilde{t}_{2g}^{3}(\uparrow) and t~2g2(↓)]\widetilde{t}_{2g}^{2}(\downarrow)]. In β-NiUO4_4, however, the t~2g\widetilde{t}_{2g} subspace is fully occupied [t~2g3(↑)[\widetilde{t}_{2g}^{3}(\uparrow) and t~2g3(↓)]\widetilde{t}_{2g}^{3}(\downarrow)], which causes the manifold to be quite insensitive to perturbations, i.e., its occupations barely change during the course of the LR-cDFT calculations.[57] This results in a small numerical response that ultimately translates

into a large orbital-resolved Hubbard parameter of UNi−t2g=7.4 eVU_{\mathrm{Ni}-t_{2g}} = 7.4\,\mathrm{eV}. Interestingly, the transition to orbitally-resolved A-3dd manifolds also affects the UU values of the other manifolds, particularly in MnUO4_4, where UU−5fν1−ν4U_{\mathrm{U}-5f_{\nu_1-\nu_4}} drops by 0.4 eV0.4\,\mathrm{eV} compared to setup (1), whereas UO1−2pU_{\mathrm{O1}-2p} and UO2−2pU_{\mathrm{O2}-2p} decrease only slightly by ≈0.1 eV\approx0.1\,\mathrm{eV}. This demonstrates the importance of the e~g\widetilde{e}_g states for both intra-shell screening (t~2g⇔e~g\widetilde{t}_{2g} \Leftrightarrow\widetilde{e}_g) and inter-site interactions between the A-3dd shell and adjacent ligand 2pp orbitals.

Finally, with setup (3) the UU values of oxygen also experience a strong reduction, as the Hubbard UU correction to O-2pp is restricted to the localized pxp_x (O1) and pyp_y (O2) orbitals, respectively. Remarkable is not only the drop in values by itself, from ≥7.4 eV\geq7.4\,\mathrm{eV} down to ≈4.2 eV\approx4.2\,\mathrm{eV}, but also the tightening of the spread (i.e., the difference between the largest and the smallest UO−2pU_{\mathrm{O}-2p} value), which amounts to ≈0.5 eV\approx0.5\,\mathrm{eV} in the previous setups but shrinks to only 0.1 eV0.1\,\mathrm{eV} in setup (3). The fact that UO−2px/yU_{\mathrm{O}-2p_{x/y}} is essentially constant, regardless of the A-site cation or the crystallographic site, is a testimony to the almost nonbonding (lone-pair) nature of these orbitals. Nevertheless, with UU values on the order of 4.2 eV4.2\,\mathrm{eV}, they severely contribute to deviations from PWL; and intriguingly do so much more than the A-t~2g\widetilde{t}_{2g} and U-5fν1−ν45f_{\nu_1-\nu_4} subspaces.

The strong reduction in UU parameters upon transition to orbital-resolved manifolds highlights an important feature of the linear-response formalism, namely that only screening channels outside the target subspace contribute to the effective interaction strength. [19, 56, 58] When perturbing entire 5f5f, 3d3d, or 2p2p shells, important interactions (particularly intra-shell ones like t~2g⇔e~g\widetilde{t}_{2g} \Leftrightarrow\widetilde{e}_g) are prevented from screening the perturbation, which leads to large UU values due to small (apparent) responses. This problem is aggravated by the use of OAO projectors, which often misattribute ligand electrons (e.g., belonging to O-sp2sp^2 hybrid orbitals) to metal orbitals, thus suppressing inter-shell screening pathways. By instead targeting only the most localized frontier orbitals, one mitigates both issues: the relevant intra-shell screening channels remain active, and the misattribution of ligand electrons remains unpunished, as the e~g\widetilde{e}_g and U-5fν5−ν75f_{\nu_5-\nu_7} manifolds are not included in the Hubbard manifold. For the AUO4_4 systems investigated here, the orbitally-resolved interaction parameters are therefore expected to be more representative of the physical reality than their shell-averaged counterparts.

Structural distortions

To assess the impact of differently defined Hubbard manifolds on crystal structure predictions, we evaluate the key distortion parameters θ\theta, δU\delta_{U} and δO\delta_{O} defined in § 3.2. These distortions are highly sensitive to the underlying electronic structure (and vice versa), as illustrated by the PDOSs obtained using different DFT(+U+U) schemes in Figures S3–S5 of the SI, and thus provide a meaningful benchmark for this purpose. The PDOSs computed with the shell-averaged DFT+U+U method [(b) panels] bear some similarity with those of DFT+U+U(WF) [(f) panels]; however, the latter predicts a valence band edge of predominant A-3d3d character for MnUO4_4 and CoUO4_4, whereas in the former, these band edges are strongly dominated by O-2p2p states. The gradual exclusion of the hybridized states from the Hubbard manifold [(c), (d), and (e) panels] leads to a PDOS more closely resembling that of PBEsol [(a) panels], with the A-3d3d dominated states located close to the valence band maximum. Regarding the band gaps, DFT+U+U(WF), shell-averaged DFT+U+U method and hybrid functional (HSE06,[59] provided here as a reference (Figure S6) consistently yield gaps on the order of ≈2\approx2 eV, whereas smaller gaps <1< 1 eV are obtained for the OR-DFT+U+U setups (2) and (3), except for MnUO4_4, which is predicted to be metallic. Moreover, the OR-DFT+U+U setups (2) and (3) and HSE06 predict broader valence and conduction bands than DFT+U+U(WF) and shell-averaged DFT+U+U, whose bands are comparatively denser. Given the lack of experimental data on the electronic structure of these materials, no definitive conclusion can be drawn regarding the spectral accuracy of the various methods. Nevertheless, although DFT+U+U(WF) qualitatively gives the best match to the HSE06 results, OR-DFT+U+U setups (2) and (3) show better agreement in terms of band widths. These subtle similarities and differences are taken into account when discussing accuracy of the different methods in predicting the structural distortions.

Figure 5 presents the results for uncorrected DFT (PBEsol), the shell-averaged manifold (shell-averaged DFT+UU) and the three orbital-resolved Hubbard manifolds defined above, applied using the parameters reported in Table 2. Also shown for comparison is the DFT+UU(WF) data taken from in Ref. 26 (details of these calculations are provided in Section IA of the SI). Importantly, the projector basis (OAO) is identical for the shell-averaged calculations and the orbitally-resolved ones, so that differences between these approaches arise solely from the specification of the target subspace rather than from the projectors.

SystemUU (eV)
Shell-averagedA-3ddU-5ffO1-2ppO2-2pp
β-NiUO4_47.03 (6.6)3.65 (2.6)7.567.97
MnUO4_47.34 (4.4)3.92 (2.7)7.457.82
CoUO4_46.19 (5.2)3.77 (2.7)7.547.94
Setup (1)A-3ddU-5fν1−ν4f_{\nu_{1}-\nu_{4}}O1-2ppO2-2pp
β-NiUO4_47.031.377.597.97
MnUO4_47.171.387.497.87
CoUO4_46.201.367.567.94
Setup (2)A-t~2g\widetilde{t}_{2g}U-5fν1−ν4f_{\nu_{1}-\nu_{4}}O1-2ppO2-2pp
β-NiUO4_47.401.337.507.78
MnUO4_41.270.937.407.74
CoUO4_42.331.227.477.77
Setup (3)A-t~2g\widetilde{t}_{2g}U-5fν1−ν4f_{\nu_{1}-\nu_{4}}O1-2pxp_xO2-2pyp_y
β-NiUO4_47.681.264.144.13
MnUO4_41.461.014.254.18
CoUO4_42.561.154.114.14

Table 2. Self-consistent Hubbard UU parameters obtained from LR-cDFT for four setups (one shell-averaged plus three orbital-resolved) with differently defined Hubbard manifolds. The values in parentheses are those derived and applied by Murphy et al..

Image not extracted

Figure 5. Off-center displacements of uranium, δU\delta_{\mathrm{U}}, and O2O_2 atoms, δO\delta_{\mathrm{O}} (a,c,e), and octahedral tilt angle θ\theta in (b,d,f) as obtained from bare PBEsol and DFT+UU calculations using differently defined Hubbard manifolds (see text and Table 2). The DFT+UU(WF) data points were taken from Ref. 26.

The uncorrected PBEsol functional significantly overestimates the lattice distortions in all three compounds. The most pronounced case is MnUO4\mathrm{MnUO}_{4} (Figure 5c/Figure 5d), where the predicted values of δU\delta_{\mathrm{U}} and θ\theta massively exceed the experimental estimates, [26], by 241% and 264%, respectively. For β\beta-NiUO4\mathrm{NiUO}_{4} and CoUO4\mathrm{CoUO}_{4} (Figure 5a/Figure 5b and Figure 5e/Figure 5f, respectively), the deviations are slightly less dramatic but remain significant; for instance, θ\theta is off by nearly 90% in CoUO4\mathrm{CoUO}_{4}.

If these overestimations stem from SIEs (and the associated spurious over-delocalization of charge), Hubbard UU corrections should rectify or at least mitigate them, provided that the Hubbard manifold is defined such that (only) localized frontier states are targeted by the correction.[10, 19] This is seemingly not the case for shell-averaged DFT+UU, which suppresses structural distortions across all compounds. While in β\beta-NiUO4\mathrm{NiUO}_{4}, δU\delta_{\mathrm{U}}, δO\delta_{\mathrm{O}}, and θ\theta are severely underestimated by up to 500%, MnUO4\mathrm{MnUO}_{4} and CoUO4\mathrm{CoUO}_{4} are even entirely transformed into the higher-symmetry Cmmm\mathit{Cmmm} configurations, as all of their distortion parameters drop to zero (barring numerical noise). The DFT+UU(WF) scheme represents a notable improvement with respect to both uncorrected DFT and shell-averaged DFT+UU, as the Wannier function basis adequately represents frontier orbitals that preserve spatial localization while minimizing overlap with ligand states. With the improved WF Hubbard projectors, the distortion parameters calculated for β\beta-NiUO4\mathrm{NiUO}_{4} and CoUO4\mathrm{CoUO}_{4} are found in good agreement with the experiment, deviating by less than 20%. Only for MnUO4\mathrm{MnUO}_{4} the accuracy is less satisfactory, as δU\delta_{\mathrm{U}}, θ\theta and δO\delta_{\mathrm{O}} remain overestimated by 59%, 89% and 136%, respectively. The reasons for this inconsistency will be discussed later.

OR-DFT+UU with setup (1) offers no improvement over shell-averaged DFT+UU, as the structural distortions remain suppressed almost entirely across all compounds. This is in spite of the considerable difference between the numerical values of UU−5fν1−ν4U_{\mathrm{U-5f}\nu_1-\nu_4} and UU−5fU_{\mathrm{U-5f}}.

However, the Hubbard corrections to U−5ff mainly affect states in the conduction band, which clearly do not influence the ground-state ionic structures. This result supports previous findings indicating that the symmetry of ternary monouranates is mainly controlled by the A-site cations.[26, 49]

Hence, expanding the orbital resolution to the A-sites’ t2gt_{2g} orbitals within setup (2) markedly improves the accuracy of predictions for β-NiUO4_4 and CoUO4_4, with δU\delta_{\mathrm{U}}, δO\delta_{\mathrm{O}} and θ\theta closely matching both experimental values and the results of DFT+UU(WF). However, and similar to DFT+UU(WF), setup (2) still overestimates the distortions in MnUO4_4. It is worth noting that Mn2+^{2+} ions are comparatively large, with an ionic radius of 0.83 Å that exceeds the radii of both Co2+^{2+} (0.745 Å) and Ni2+^{2+} (0.69 Å).[60] Consequently, Mn2+^{2+} shows a stronger tendency to hybridize with neighboring O-2p2p states that is also reflected in the more pronounced variations of the Hubbard UU values (Table 2). In view of this, it is no surprise that setup (3), where the Hubbard manifold of O is restricted to the localized px/pyp_x/p_y orbitals (in addition to orbitally-resolved corrections to U-5f5f and A-3d3d), cures the systematic overestimation of distortion parameters in MnUO4_4. Fortunately, the orbital-resolved treatment of O-2p2p affects the already good predictions of the other two compounds to a much lesser degree: minor improvements result for CoUO4_4, where δU\delta_{\mathrm{U}} and δO\delta_{\mathrm{O}} match the experimental value almost exactly, whereas the accuracy is minimally deteriorated for β-NiUO4_4. Therefore, setup (3) provides the most consistent overall accuracy, delivering very good predictions for all distortion parameters and across all compounds. Its dramatic edge over setup (2) and DFT+UU(WF) in MnUO4_4 shows the importance of avoiding the correction of strongly hybridized states, here consisting in the bonding σ\sigma-states that form between A-ege_g and the O-sp2sp^2 hybrid orbitals. More in general, the improvements achieved due to setups (2) and (3) demonstrate that a physically meaningful use of Hubbard UU corrections requires careful disentanglement of localized and delocalized states. This is particularly crucial for systems where orbital hybridization plays an important role. Additional relative energies of the CmmmCmmm and IbmmIbmm phases (Table S4) corroborate the structural analysis: setups (2) and (3) yield the correct ground-state ordering for β\beta-NiUO4_4 and CoUO4_4, and the residual MnUO4_4 deviation vanishes after removing the Hubbard contribution, consistent with Ref. 26.

Projector mismatch as a source of spurious Hubbard forces

The profound impact of the Hubbard manifold on the accuracy of structural predictions for AUO4_4 compounds demands clarification. While it is generally known that the ionic ground state of DFT+UU can differ significantly from that of the bare functional, it is not understood why and under which circumstances DFT+UU leads to over-symmetrization of atomistic structures, as observed here and reported elsewhere for diverse TM oxides. [26, 53, 61, 62, 63] In the following, we try to identify the root cause of these deviations and demonstrate why certain Hubbard projector functions or target manifolds perform better than others.

It follows from the Hellmann-Feynman theorem that the Hubbard energy functional (c.f. Equation (1)) contributes an additional term FUI\mathbf{F}^{I}_{U} to the total force acting on an ion II.[44, 64]

FUI=−∂EU∂RI=−∑k,v,σ⟨ψk,vσ∣∂VUσ∂RI∣ψk,vσ⟩(6)\mathbf{F}^{I}_{U}=-\frac{\partial E_{U}}{\partial\mathbf{R}_{I}}=-\sum_{\mathbf{k},v,\sigma}\left\langle\psi^{\sigma}_{\mathbf{k},v}\left|\frac{\partial V^{\sigma}_{U}}{\partial\mathbf{R}_{I}}\right|\psi^{\sigma}_{\mathbf{k},v}\right\rangle \tag*{(6)}

where RI\mathbf{R}_{I} denotes the position of the IIth atom. Eq. (6) implies that a finite Hubbard force arises whenever the derivative ∂VUσ∂RI\frac{\partial V^{\sigma}_{U}}{\partial\mathbf{R}_{I}} is non-zero. Recalling Eq. (3) and assuming a negligible dependence of UU on the position, this condition is fulfilled if a displacement of ion II (∂RI\partial\mathbf{R}_{I}) modifies the occupation of an eigenstate (∂λiIσ\partial\lambda^{I\sigma}_{i}), for instance due to an increase or decrease in its overlap with occupied KS states. Note that ∂VUσ∂RI\frac{\partial V^{\sigma}_{U}}{\partial\mathbf{R}_{I}} can also be non-zero if the projectors themselves vary, e.g., due to re-orthogonalization of OAO projectors. In the following, however, we neglect these so-called Pulay forces[44] and focus instead on the electronic “density response”.[65] Because of the form of the Hubbard energy functional, eigenstates with occupation λiIσ<0.5\lambda^{I\sigma}_{i}<0.5 will experience a force that tends to further reduce their occupation (driving λiIσ→0\lambda^{I\sigma}_{i}\to0) by lowering their overlap with occupied KS wavefunctions. Conversely, eigenstates with λiIσ>0.5\lambda^{I\sigma}_{i}>0.5 will tend to increase their occupation. The central question is: why would an eigenstate exhibit an occupation far from both zero and one to begin with? This consideration allows us to distinguish two fundamentally different scenarios under which non-zero Hubbard forces arise:

In scenario (i), ∂λiIσ∂RI≠0\frac{\partial\lambda_i^{I\sigma}}{\partial R_I} \ne0 because the occupation of an eigenstate deviates from zero or one due to violations of the PWL condition. Hence, the resulting forces act to counter the artificial delocalization of states caused by SIEs. In scenario (ii), ∂λiIσ∂RI≠0\frac{\partial\lambda_i^{I\sigma}}{\partial R_I} \ne0 because the (localized) Hubbard projector functions do not accurately represent the true electron distribution in the system and produce occupation numbers that lie between zero and one, independently of the presence of SIEs. Here, the resulting forces bias the charge density distribution ρ(r)\rho(\mathbf{r}) (and therefore also the ionic structure) towards alignment with the Hubbard projector functions. Such forces are artificial and unphysical, since there is no fundamental reason why the electron density of a system should conform to that of an arbitrarily defined set of projector functions. Popular atomic-like projector functions, for example (including NAO, OAO, PAW, and LMTO projectors), are constructed based on radial Schrödinger equations for isolated atoms in their neutral charge state. However, the isolated-atom model may not be a reliable approximation for real compounds. This is especially the case for materials with strong covalent bonding (where the quantum numbers nn, ll and mm can lose their physical meaning), for structures with highly distorted bond angles, or when the radius of a charged ion deviates significantly from that of the neutral atom.

Figure 6 illustrates this issue by showing the mismatch between the unoccupied (spin-down) e~g\widetilde{e}_g-like KS orbitals around the Ni2+\mathrm{Ni}^{2+} ion in β\beta-NiUO4_4 and the diagonal projector orbitals ϕegλ(r)\phi_{e_g}^{\lambda}(\mathbf{r}) corresponding to eigenstates ν1λ\nu_1^{\lambda} and ν2λ\nu_2^{\lambda} of the occupation matrix. These eigenstates, which are linear combinations of the OAO projectors (Figures S7 and S8), are indeed fractionally occupied (λ1λ≈0.16\lambda_1^{\lambda} \approx0.16, λ2λ≈0.22\lambda_2^{\lambda} \approx0.22, c.f. Table 1). Therefore, applying Hubbard UU corrections to this manifold induces an unphysical symmetrization of the structure, as the minimum of this DFT+UU ground state shifts to a configuration where the overlap of the occupied KS states with ν1\nu_1 and ν2\nu_2 is minimized. Note that such artifacts often remain negligible in highly symmetric systems, including the well-investigated solids FeO and NiO. These systems exhibit coordination polyhedra with ideal OhO_h site symmetries, where the angular shape of atomic projectors (e.g., 90° or 180° for dd orbitals) coincides with the metal-ligand bond axes.

Image not extracted

Figure 6. Comparison for β-NiUO4_4 between the spatial extension of (a) the squared modulus of the Hubbard projector orbitals, ∣ϕeg↓(r)∣2≡∣ϕ1↓(r)+ϕ2↓(r)∣2=∣∑m=12(∑i=12νmi↓)φm(r)∣2|\phi_{e_g}^{\downarrow}(\mathbf{r})|^2 \equiv|\phi_1^{\downarrow}(\mathbf{r})+\phi_2^{\downarrow}(\mathbf{r})|^2 = \left|\sum_{m=1}^{2}\left(\sum_{i=1}^{2}\nu_{mi}^{\downarrow}\right)\varphi_m(\mathbf{r})\right|^2, representing the formally unoccupied ege_g-like orbitals, and (b) the (pseudo)-charge density due to the KS wavefunctions of the lowest conduction bands in the spin ↓\downarrow channel in the range from 1.8 to 4.2 eV w.r.t. valence band maximum, ρCB↓(r)=∑ν∈CB∑k∣ψk,ν↓(r)∣2\rho_{\mathrm{CB}}^{\downarrow}(\mathbf{r}) = \sum_{\nu\in\mathrm{CB}}\sum_k |\psi_{k,\nu}^{\downarrow}(\mathbf{r})|^2 [see Figure 3(a)]. It is the mismatch between projectors and KS wavefunctions that gives rise to the fractional occupation numbers λ1↓\lambda_1^{\downarrow} and λ2↓\lambda_2^{\downarrow}. The color code is the same as in Figure 1.

The observation of an artificial force contribution provides a rationale for the improvements observed when employing either WF projectors or OR Hubbard manifolds. In the former case, it is the projector functions themselves that adapt to the charge density, thus resulting in a less fractional eigenvalue spectrum that yields no spurious force contributions. Conversely, in the latter case, the inadequate eigenstates are simply excluded from the correction by setting Ui=0U_i = 0 for all respective ii. Note that spurious Pulay forces due to projector mismatch can also entail “under-symmetrization”, as demonstrated by the improvements in the structural predictions for MnUO4_4 upon switching from OR manifold (2) to manifold (3). In manifold (2), the correction targets three sp2sp^2 hybrid orbitals (with bond angles of approximately 120°) plus an unhybridized non-bonding state using three (ortho-)atomic 2p2p projectors (pxp_x, pyp_y, pzp_z). While the non-bonding state (eigenstate ν3\nu_3) is well represented by one of the projectors, it is evident that the remaining two projectors (or any linear combination

thereof) cannot reproduce the spatial extent of the three sp2sp^{2} hybrid orbitals. Consequently, correcting eigenstates ν1\nu_{1} and ν2\nu_{2} of the O-2p shell drives the trigonal planar geometry toward an atomic-like one, in which the bond angles are closer to 90°. In the AUO4_{4} structures considered here, such distortions increase the deviation from the more symmetric CmmmCmmm geometry, most significantly in MnUO4_{4}, where interactions between the A-site and neighboring O atoms are strongest due to the relatively large radius of Mn2+^{2+}.

Concluding remarks

Using an orbital-resolved DFT+UU scheme, [19] we have demonstrated how the choice of the Hubbard manifold affects the ground-state electronic and structural properties of MnUO4_{4}, CoUO4_{4} and β\beta-NiUO4_{4}. With (ortho-)atomic projector functions, the characteristic distortions of these monouranates are accurately reproduced only when the Hubbard manifold is restricted to the most localized subset of orbitals within the A-3d, U-5f, and O-2p shells. In contrast, applying Hubbard UU corrections to more delocalized states within these shells markedly reduces the accuracy. An exception is found for the U-5f shell, where the structural distortions are insensitive to the choice of Hubbard manifold, although changes in the electronic structure are still observed (see Figures S3–S5). The excessive sensitivity of the ionic structure to the choice of the Hubbard manifold stems from an implicit, artificial contribution in the Hubbard force expression, which aligns the computed charge density ρ(r)\rho(\mathbf{r}) (and thus, the ionic positions) with the diagonalized (ortho-)atomic projectors ϕiIσ(r)\phi_{i}^{I\sigma}(\mathbf{r}).

Two strategies can help mitigate these artifacts: either one employs Hubbard projector functions that reflect the local bonding environment more faithfully—such as Wannier functions (as practiced in Ref. 26)—or one excludes strongly hybridized states (where the mismatch between ρ(r)\rho(\mathbf{r}) and ϕiIσ(r)\phi_{i}^{I\sigma}(\mathbf{r}) is large) from the Hubbard manifold using OR-DFT+UU, as done here. The success of both approaches, DFT+UU(WF) and OR-DFT+UU, hinges on an appropriate choice of the Hubbard manifold (in fact, this applies to all DFT+UU approaches, including the shell-averaged one). Within the DFT+UU(WF) framework, this involves the selection of energy windows and sometimes also the disentanglement of bands; for OR-DFT+UU with atomic-like Hubbard projectors, one must carefully determine which eigenstates of the occupation matrix exhibit true on-site character, e.g., by analyzing the eigenvalue spectrum. These steps typically require chemical intuition and some degree of trial-and-error, although recent progress on the automation of the Wannierization step [66, 67] has significantly reduced the effort associated with using the DFT+UU(WF) formalism. DFT+UU(WF) might outperform OR-DFT+UU in structures where the mismatch between the true charge density and the shape of atomic-like projectors is extreme, or where Hubbard corrections need to be applied to electronic states localized between atoms (cf. inter-site terms of Refs. 63,68). This can be important when atomic-like projector functions cannot adequately describe a localized manifold, for instance highly localized sp3sp^3 hybrid orbitals. A WF-based approach could still work in such cases because Wannier functions do not make any assumptions regarding the spatial extension of the localized states. On the other hand, owing to its conceptual simplicity, OR-DFT+UU can leverage existing routines for the calculation of forces and stresses, thereby enabling structural relaxations and ab initio molecular dynamics, which are often not feasible or not yet available within existing DFT+UU(WF) implementations. Furthermore, due to a more realistic representation of intra-shell screening, OR Hubbard manifolds often acquire lower first-principle UU values, [19], making the correction even more surgical. Importantly, however, the case of β\beta-NiUO4_4 demonstrates that the improvements of OR-DFT+UU with respect to shell-averaged schemes are mainly rooted in the exclusion of hybridized states from the Hubbard manifold, and only to a lesser extent (if any) in the reduction of the UU values.

In closing, the results of the this work suggest that studying the ground state of structurally complex compounds with distorted polyhedra, mixed valence, and hybridized electronic states requires a chemically informed and orbitally resolved framework, which both OR-DFT+UU and DFT+UU(WF) provide. A priority for future methodological advancements should be the development of nonempirical, quantitative protocols for identifying Hubbard manifolds (for a given class of projectors) with minimal user input and without reliance on chemical intuition.

Acknowledgement

E.M acknowledges funding by MaX “Materials Design at the Exascale”, a Center of Excellence co-funded by the European High Performance Computing Joint Undertaking (JU) and participating countries under grant agreement No. 101093374. I.T. acknowledges support from the Swiss National Science Foundation (SNSF), grant No. 200021-227641 and No. 200021-236507, and support from the NCCR MARVEL, a National Centre of Competence in Research, funded by SNSF. The authors gratefully acknowledge computing time on the supercomputer JURECA69^{69} at Forschungszentrum Jülich under grant No. cjiek61.

Supporting Information Available

Occupation eigenvalues for MnUO4_4 and CoUO4_4, projected density of states (PDOS) plots for all Hubbard manifolds and compounds presented, visualization of the OAO projector orbitals and the eigenstates of β-NiUO4_4, and a detailed description of the tool used to visualize Hubbard projector functions in real space.

References

TOC Graphic

Image not extracted

Figure 1 (PDF p. 39).

References

  1. [1]Jain, A.; Shin, Y.; Persson, K. A. Computational Predictions of Energy Materials Using Density Functional Theory. Nat. Rev. Mater. 2016, 1, 15004.
  2. [2]Chroneos, A.; Rushton, M.; Jiang, C.; Tsoukalas, L. Nuclear Wasteform Materials: Atomistic Simulation Case Studies. J. Nucl. Mater. 2013, 441, 29–39.DOI
  3. [3]Bosbach, D.; Brandt, F.; Bukaemsky, A.; Deissmann, G.; Kegler, P.; Klinkenberg, M.; Kowalski, P. M.; Modolo, G.; Niemeyer, I.; Neumeier, S.; Vinograd, V. Research for the Safe Management of Nuclear Waste at Forschungszentrum Jülich: Materials Chemistry and Solid Solution Aspects. Adv. Eng. Mater. 2020, 22, 1901417.
  4. [4]Perdew, J. P.; Zunger, A. Self-Interaction Correction to Density-Functional Approximations for Many-Electron Systems. Phys. Rev. B 1981, 23, 5048–5079.
  5. [5]Mori-Sánchez, P.; Cohen, A. J.; Yang, W. Many-electron self-interaction error in approximate density functionals. J. Chem. Phys. 2006, 125, 201102.
  6. [6]Kümmel, S.; Kronik, L. Orbital-Dependent Density Functionals: Theory and Applications. Rev. Mod. Phys. 2008, 80, 3–60.
  7. [7]Bajaj, A.; Janet, J. P.; Kulik, H. J. Communication: Recovering the flat-plane condition in electronic structure theory at semi-local DFT cost. J. Chem. Phys. 2017, 147, 191101.DOI
  8. [8]Burgess, A. C.; Linscott, E.; O’Regan, D. D. DFT+U-type functional derived to explicitly address the flat plane condition. Phys. Rev. B 2023, 107, L121115.DOI
  9. [9]Perdew, J. P.; Ruzsinszky, A.; Csonka, G. I.; Vydrov, O. A.; Scuseria, G. E.; Constantin, L. A.; Zhou, X.; Burke, K. Restoring the Density-Gradient Expansion for Exchange in Solids and Surfaces. Phys. Rev. Lett. 2008, 100, 136406.
  10. [10]Zhao, Q.; Ioannidis, E. I.; Kulik, H. J. Global and local curvature in density functional theory. J. Chem. Phys. 2016, 145, 054109.
  11. [11]Kronik, L.; Kümmel, S. Piecewise Linearity, Freedom from Self-Interaction, and a Coulomb Asymptotic Potential: Three Related yet Inequivalent Properties of the Exact Density Functional. Phys. Chem. Chem. Phys. 2020, 22, 16467–16481.DOI
  12. [12]Beridze, G.; Kowalski, P. M. Benchmarking the DFT+ U Method for Thermochemical Calculations of Uranium Molecular Compounds and Solids. J. Phys. Chem. A 2014, 118, 11797–11810.DOI
  13. [13]Anisimov, V. I.; Zaanen, J.; Andersen, O. K. Band theory and Mott insulators: Hubbard U instead of Stoner I. Phys. Rev. B 1991, 44, 943–954.
  14. [14]Solovyev, I. V.; Dederichs, P. H.; Anisimov, V. I. Corrected atomic limit in the local-density approximation and the electronic structure of d impurities in Rb. Phys. Rev. B 1994, 50, 16861–16871.
  15. [15]Liechtenstein, A. I.; Anisimov, V. I.; Zaanen, J. Density-functional theory and strong interactions: Orbital ordering in Mott-Hubbard insulators. Phys. Rev. B 1995, 52, R5467–R5470.
  16. [16]Dudarev, S. L.; Botton, G. A.; Savrasov, S. Y.; Humphreys, C. J.; Sutton, A. P. Electron-Energy-Loss Spectra and the Structural Stability of Nickel Oxide: An LSDA+U Study. Phys. Rev. B 1998, 57, 1505–1509.DOI
  17. [17]Cococcioni, M.; De Gironcoli, S. Linear Response Approach to the Calculation of the Effective Interaction Parameters in the LDA+U Method. Phys. Rev. B 2005, 71, 035105.
  18. [18]Kulik, H. J.; Cococcioni, M.; Scherlis, D. A.; Marzari, N. Density Functional Theory in Transition-Metal Chemistry: A Self-Consistent Hubbard U Approach. Phys. Rev. Lett. 2006, 97, 103001.
  19. [19]Macke, E.; Timrov, I.; Marzari, N.; Ciacchi, L. C. Orbital-Resolved DFT+U for Molecules and Solids. J. Chem. Theory Comput. 2024, 20, 4824–4843.DOI
  20. [20]Chen, J.-L.; Kaltsoyannis, N. DFT+U Study of Uranium Dioxide and Plutonium Dioxide with Occupation Matrix Control. J. Phys. Chem. C 2022, 126, 11426–11435.DOI
  21. [21]Andersson, D. A.; Baldinozzi, G.; Desgranges, L.; Conradson, D. R.; Conradson, S. D. Density Functional Theory Calculations of UO₂ Oxidation: Evolution of UO₂₊ₓ, U₄O₉₋ᵧ, U₃O₇, and U₃O₈. Inorg. Chem. 2013, 52, 2769–2778.DOI
  22. [22]Kvashnina, K. O.; Kowalski, P. M.; Butorin, S. M.; Leinders, G.; Pakarinen, J.; Bès, R.; Li, H.; Verwerft, M. Trends in the Valence Band Electronic Structures of Mixed Uranium Oxides. Chem. Commun. 2018, 54, 9757–9760.DOI
  23. [23]Blanca Romero, A.; Kowalski, P. M.; Beridze, G.; Schlenz, H.; Bosbach, D. Performance of DFT+U method for prediction of structural and thermodynamic parameters of monazite-type ceramics. J. Comput. Chem. 2014, 35, 1339–1346.DOI
  24. [24]Ewing, R. C.; Whittleston, R. A.; Yardley, B. W. Geological Disposal of Nuclear Waste: A Primer. ELEMENTS 2016, 12, 233–237.
  25. [25]Murphy, G. L.; Zhang, Z.; Kennedy, B. J. Complex Oxides; WORLD SCIENTIFIC, 2019; pp 103–130.
  26. [26]Murphy, G. L.; Zhang, Z.; Tesch, R.; Kowalski, P. M.; Avdeev, M.; Kuo, E. Y.; Gregg, D. J.; Kegler, P.; Alekseev, E. V.; Kennedy, B. J. Tilting and Distortion in Rutile-Related Mixed Metal Ternary Uranium Oxides: A Structural, Spectroscopic, and Theoretical Investigation. Inorg. Chem. 2021, 60, 2246–2260.DOI
  27. [27]Ting, Y.-Y.; Kowalski, P. M. Refined DFT+U Method for Computation of Layered Oxide Cathode Materials. Electrochim. Acta 2023, 443, 141912.DOI
  28. [28]He, Z.-D.; Tesch, R.; Eslamibidgoli, M. J.; Eikerling, M. H.; Kowalski, P. M. Low-Spin State of Fe in Fe-doped NiOOH Electrocatalysts. Nat. Commun. 2023, 14, 3498.DOI
  29. [29]Vitova, T.; Pidchenko, I.; Biswas, S.; Beridze, G.; Dunne, P. W.; Schild, D.; Wang, Z.; Kowalski, P. M.; Baker, R. J. Dehydration of the Uranyl Peroxide Studtite, [UO₂(η²- O₂)(H₂O)₂]·2H₂O, Affords a Drastic Change in the Electronic Structure: A Combined X-ray Spectroscopic and Theoretical Analysis. Inorg. Chem. 2018, 57, 1735–1743.
  30. [30]Kowalski, P. M.; He, Z.; Cheong, O. Electrode and Electrolyte Materials From Atomistic Simulations: Properties of LiₓFePO₄ Electrode and Zircon-Based Ionic Conductors. Front. Energy Res. 2021, 9, 653542.DOI
  31. [31]Zhou, F.; Ozoliņš, V. Obtaining Correct Orbital Ground States in f-Electron Systems Using a Nonspherical Self-Interaction-Corrected LDA+U Method. Phys. Rev. B 2009, 80, 125127.DOI
  32. [32]Solovyev, I.; Hamada, N.; Terakura, K. T₂g versus All 3d Localization in LaMO₃ Perovskites (M=Ti–Cu): First-principles Study. Phys. Rev. B 1996, 53, 7158–7170.pubmed.ncbi.nlm.nih.gov/9982162
  33. [33]Pickett, W. E.; Erwin, S. C.; Ethridge, E. C. Reformulation of the LDA + U Method for a Local-Orbital Basis. Phys. Rev. B 1998, 58, 1201–1209.
  34. [36]Giannozzi, P.; Baroni, S.; Bonini, N.; Calandra, M.; Car, R.; Cavazzoni, C.; Ceresoli, D.; Chiarotti, G. L.; Cococcioni, M.; Dabo, I.; Dal Corso, A.; De Gironcoli, S.; Fabris, S.; Fratesi, G.; Gebauer, R.; Gerstmann, U.; Gougoussis, C.; Kokalj, A.; Lazzeri, M.; Martin-Samos, L.; Marzari, N.; Mauri, F.; Mazzarello, R.; Paolini, S.; Pasquarello, A.; Paulatto, L.; Sbraccia, C.; Scandolo, S.; Sclauzero, G.; Seitsonen, A. P.; Smogunov, A.; Umari, P.; Wentzcovitch, R. M. QUANTUM ESPRESSO: A Modular and Open-Source Software Project for Quantum Simulations of Materials. J. Phys.: Condens. Matter 2009, 21, 395502.DOI
  35. [37]Giannozzi, P.; Andreussi, O.; Brumme, T.; Bunau, O.; Buongiorno Nardelli, M.; Calandra, M.; Car, R.; Cavazzoni, C.; Ceresoli, D.; Coccoccioni, M.; Colonna, N.; Carnimeo, I.; Dal Corso, A.; De Gironcoli, S.; Delugas, P.; DiStasio, R. A.; Ferretti, A.; Floris, A.; Fratesi, G.; Fugallo, G.; Gebauer, R.; Gerstmann, U.; Giustino, F.; Gorni, T.; Jia, J.; Kawamura, M.; Ko, H.-Y.; Kokalj, A.; Küçükbenli, E.; Lazzeri, M.; Marsili, M.; Marzari, N.; Mauri, F.; Nguyen, N. L.; Nguyen, H.-V.; Otero-de-la-Roza, A.; Paulatto, L.; Poncé, S.; Rocca, D.; Sabatini, R.; Santra, B.; Schlipf, M.; Seitsonen, A. P.; Smogunov, A.; Timrov, I.; Thonhauser, T.; Umari, P.; Vast, N.; Wu, X.; Baroni, S. Advanced Capabilities for Materials Modelling with Quantum ESPRESSO. J. Phys.: Condens. Matter 2017, 29, 465901.DOI
  36. [38]Giannozzi, P.; Baseggio, O.; Bonfà, P.; Brunato, D.; Car, R.; Carnimeo, I.; Cavazzoni, C.; de Gironcoli, S.; Delugas, P.; Ferrari Ruffino, F.; Ferretti, A.; Marzari, N.; Timrov, I.; Urru, A.; Baroni, S. Quantum ESPRESSO toward the exascale. J. Chem. Phys. 2020, 152, 154105.
  37. [39]Vanderbilt, D. Soft Self-Consistent Pseudopotentials in a Generalized Eigenvalue Formalism. Phys. Rev. B 1990, 41, 7892–7895.
  38. [40]Mahajan, R.; Timrov, I.; Marzari, N.; Kashyap, A. Importance of Intersite Hubbard Interactions in β−MnO2: A First-Principles DFT+U+V Study. Phys. Rev. Mater. 2021, 5, 104402.DOI
  39. [41]Müller, P. C.; Schmit, N.; Sann, L.; Steinberg, S.; Dronskowski, R. Fragment Orbitals Extracted from First-Principles Plane-Wave Calculations. Inorganic Chemistry 2024, 63, 20161–20172.DOI
  40. [42]Maintz, S.; Deringer, V. L.; Tchougréeff, A. L.; Dronskowski, R. LOBSTER: A Tool to Extract Chemical Bonding from Plane-wave Based DFT. Journal of Computational Chemistry 2016, 37, 1030–1035.DOI
  41. [43]Löwdin, P.-O. On the Non-Orthogonality Problem Connected with the Use of Atomic Wave Functions in the Theory of Molecules and Crystals. J. Chem. Phys. 1950, 18, 365–375.
  42. [44]Timrov, I.; Aquilante, F.; Binci, L.; Cococcioni, M.; Marzari, N. Pulay Forces in Density-Functional Theory with Extended Hubbard Functionals: From Nonorthogonalized to Orthogonalized Manifolds. Phys. Rev. B 2020, 102, 235159.DOI
  43. [45]Cococcioni, M.; Marzari, N. Energetics and Cathode Voltages of LiMPO₄ Olivines (M=Fe,Mn) from Extended Hubbard Functionals. Phys. Rev. Mater. 2019, 3, 033801.DOI
  44. [46]Timrov, I.; Marzari, N.; Cococcioni, M. Hubbard parameters from density-functional perturbation theory. Phys. Rev. B 2018, 98, 085127.DOI
  45. [47]Timrov, I.; Marzari, N.; Cococcioni, M. Self-Consistent Hubbard Parameters from Density-Functional Perturbation Theory in the Ultrasoft and Projector-Augmented Wave Formulations. Phys. Rev. B 2021, 103, 045141.DOI
  46. [48]Bastonero, L.; Malica, C.; Macke, E.; Bercx, M.; Huber, S. P.; Timrov, I.; Marzari, N. First-Principles Hubbard Parameters with Automated and Reproducible Workflows. npj Comput. Mater. 2025, 11, 183.DOI
  47. [49]Baur, W. H.; Joswig, W.; Pieper, G.; Kassner, D. CoReO₄, a New Rutile-Type Derivative with Ordering of Two Cations. J. Solid State Chem. 1992, 99, 207–211.DOI
  48. [50]Murphy, G. L.; Kegler, P.; Zhang, Y.; Zhang, Z.; Alekseev, E. V.; De Jonge, M. D.; Kennedy, B. J. High-Pressure Synthesis, Structural, and Spectroscopic Studies of the Ni–U–O System. Inorg. Chem. 2018, 57, 13847–13858.DOI
  49. [51]Uhrin, M.; Zadoks, A.; Binci, L.; Marzari, N.; Timrov, I. Machine Learning Hubbard Parameters with Equivariant Neural Networks. npj. Comput. Mater. 2025, 11, 19.DOI
  50. [52]Orhan, O. K.; O’Regan, D. D. First-Principles Hubbard U and Hund’s J Corrected Approximate Density Functional Theory Predicts an Accurate Fundamental Gap in Rutile and Anatase TiO₂. Phys. Rev. B 2020, 101.DOI
  51. [53]Liu, T.-c.; Gaines, D.; Kim, H.; Salgado-Casanova, A.; Torrisi, S. B.; Wolverton, C. Anomalous Reversal of Stability in Mo-containing Oxides: A Difficult Case Exhibiting Sensitivity to DFT+U and Distortion. Phys. Rev. Mater. 2025, 9.DOI
  52. [54]Sit, P. H.-L.; Car, R.; Cohen, M. H.; Selloni, A. Simple, Unambiguous Theoretical Approach to Oxidation State Determination via First-Principles Calculations. Inorg. Chem. 2011, 50, 10259–10267.
  53. [55]Himmetoglu, B.; Wentzcovitch, R. M.; Cococcioni, M. First-principles study of electronic and structural properties of CuO. Phys. Rev. B 2011, 84, 115108.
  54. [56]Linscott, E. B.; Cole, D. J.; Payne, M. C.; O’Regan, D. D. Role of Spin in the Calculation of Hubbard U and Hund’s J Parameters from First Principles. Phys. Rev. B 2018, 98, 235157.DOI
  55. [57]Kulik, H. J.; Marzari, N. Systematic Study of First-Row Transition-Metal Diatomic Molecules: A Self-Consistent DFT+U Approach. J. Chem. Phys. 2010, 133, 114103.DOI
  56. [58]Vaugier, L.; Jiang, H.; Biermann, S. Hubbard U and Hund Exchange J in Transition Metal Oxides: Screening versus Localization Trends from Constrained Random Phase Approximation. Phys. Rev. B 2012, 86, 165105.DOI
  57. [59]Heyd, J.; Scuseria, G. E.; Ernzerhof, M. Hybrid Functionals Based on a Screened Coulomb Potential. The Journal of Chemical Physics 2003, 118, 8207–8215.
  58. [60]Shannon, R. D. Revised Effective Ionic Radii and Systematic Studies of Interatomic Distances in Halides and Chalcogenides. Acta Crystallogr., Sect. A 1976, 32, 751–767.DOI
  59. [61]Do, H. T.; Lee, A. T.; Park, H.; Ngo, A. T. Delocalized Polaron and Burstein-Moss Shift Induced by Li in α−V₂O₅: A DFT+DMFT Study. Phys. Rev. B 2023, 108.DOI
  60. [62]Gebreyesus, G.; Bastonero, L.; Kotluga, M.; Marzari, N.; Timrov, I. Understanding the Role of Hubbard Corrections in the Rhombohedral Phase of BaTiO₃. Phys. Rev. B 2023, 108.DOI
  61. [63]Carta, A.; Timrov, I.; Mlkvik, P.; Hampel, A.; Ederer, C. Explicit Demonstration of the Equivalence between DFT+U and the Hartree-Fock Limit of DFT+DMFT. Phys. Rev. Res. 2025, 7.DOI
  62. [64]Himmetoglu, B.; Floris, A.; de Gironcoli, S.; Cococcioni, M. Hubbard-corrected DFT energy functionals: The LDA+U description of correlated systems. Int. J. Quantum Chem. 2014, 114, 14–49.DOI
  63. [65]Floris, A.; De Gironcoli, S.; Gross, E. K. U.; Cococcioni, M. Vibrational Properties of MnO and NiO from DFT+U-based Density Functional Perturbation Theory. Phys. Rev. B 2011, 84.
  64. [66]Qiao, J.; Pizzi, G.; Marzari, N. Automated Mixing of Maximally Localized Wannier Functions into Target Manifolds. npj. Comput. Mater. 2023, 9.DOI
  65. [67]Qiao, J.; Pizzi, G.; Marzari, N. Projectability Disentanglement for Accurate and Automated Electronic-Structure Hamiltonians. npj. Comput. Mater. 2023, 9.DOI

Paper details

vlnc:W_ckrjh5tb
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents