WorksPhysics and Astronomy
Non-perturbative calculations of nuclear matter using in-medium similarity renormalization group
Abstract
The non-perturbative ab initio calculations of infinite nuclear matter using In-Medium Similarity Renormalization Group (IMSRG) method is developed in this work, which enables calculations with chiral two and three-nucleon forces at NLO and NLO. Results from the many-body perturbation theory at different orders and coupled-cluster theory are also presented for comparison. It is shown that different many-body approaches lead to obvious discrepancies with a harder nuclear interaction for both pure neutron matter and symmetric nuclear matter. This work provides a novel alternative infrastructure for future studies of dense nuclear matter and strongly-correlated many-body systems.
Introduction
The homogeneous nuclear matter is a non-trivial strongly-correlated many-body system. The studies of infinite nuclear matter are especially relevant in modelings of neutron stars in the era of gravitational-wave astronomy. The multi-messenger observations of neutron stars provide unique opportunities for constraining the properties of dense nuclear matter [1, 2, 3, 4, 5, 6, 7, 8]. For example, the recent observation of a massive neutron star of 2.35 solar mass [9] poses a theoretical challenge, which indicates the appearance of exotic structures in speed of sound and equation of state (EoS) around two times of nuclear saturation density () [10]. At extremely high densities above , the strongly interacting matter can be calculated by the perturbative QCD [11]. The key issue is to understand nuclear EoS at intermediate densities around a few times of , which is also essential for better inferences of the first-order phase transition from nuclear matter to quark matter.
The energy of nuclear matter around the saturation density is largely known from finite nuclear properties, which can be well described by density functional theory based on phenomenological nuclear forces. However, the slope of symmetry energies has large uncertainties and consequently the understanding of neutron-skin thickness is still ambiguous [12]. The heavy-ion collision experiments can provide a probe of EoS up to 5 times of but are restricted to nearly symmetric nuclear matter [13]. In this context, it is of fundamental interests to describe nuclear matter beyond the saturation density with realistic nuclear interactions and ab initio many-body methods.
The development of modern two-nucleon and three-nucleon interactions from chiral effective field theory (EFT) provided a consistent theory of nuclear forces rooted in chiral-symmetry breaking of QCD [14, 15, 16]. Advanced ab initio calculations based on chiral nuclear forces have been very successful in descriptions of finite nuclear properties [17, 18, 19, 20], which can be naturally applied to infinite nuclear matter. There have been a variety of ab initio methods for studies of nuclear matter. For example, the many-body perturbation theory (MBPT) has been extensively applied in a series of works [21, 22, 23] to calculate EoS of pure neutron matter and symmetric nuclear matter. The MBPT calculations have been developed up to MBPT4 at 4th order in the momentum space [22]. In addition, the coupled-cluster (CC) theory, which is a non-perturbative method using non-unitary transformations on Hamiltonian has been applied in studies of nuclear matter [24, 25]. The Green function method and Monte Carlo method have also been applied to nuclear matter [26, 27, 28, 29, 30]. Most of these many-body methods are regarded as post-Hartree-Fock methods to incorporate higher correlations beyond the mean field approximation.
It is expected that non-perturbative calculations are important for strongly-correlated nuclear matter, particularly, at higher densities. The purpose of this work is to study nuclear matter from first principles using the In-Medium Similarity Renormalization Group (IM-SRG) method. IMSRG is a non-perturbative many-body method, which incorporates many-body correlations efficiently via unitary transformations on the many-body Hamiltonian [31, 32]. Actually IMSRG provides an alternative non-perturbative method in truncations of many-body operators compared to the coupled-cluster theory. IMSRG(2) refers to the scheme that all operators are truncated at the normal-ordered two-body level although three-body forces are invoked. IMSRG(3) is truncated at the normal-ordered three-body level but it is computationally very costly [33, 34, 35]. The coupled-cluster calculations are usually truncated at the CCSD level that includes single and double particle-hole excitations. The IMSRG method has been used in ab initio calculations of finite nuclei in recent years [18, 19, 32], but it has not been applied in studies of nuclear matter yet.
Methods
In this section, we introduce how to implement the IMSRG calculations in momentum spaces based on chiral nuclear forces.
Magnus IMSRG(2)
Firstly, IMSRG is based on a unitary flow transformation [31, 32] in which the eigenvalue of an operator remains unchanged.
Here the transformation is continuous and is the flow parameter. One can choose a specific to obtain a transformed Hamiltonian whose off-diagonal part is as small as possible so that we can solve it in a reduced space. The derivative of should be
where is defined as the generator and is related to as
The generator is anti-Hermitian because of the Hermicity of . The unitary transformation can be determined by choosing a generator. The choice of generator depends on which part of Hamiltonian is chosen to be diagonal. There are different possible types of generators, and in this work we adopt the White generator [32], which is simple among different generators and the computing cost is moderate by using the Magnus method [36]. The White generator can be written as
Here is the off-diagonal part we choose, and is a denominator related to energies. The denominator could be chosen by different energy partitioning such as the Møller-Plesset scheme, and the Epstein-Nesbet scheme which we used in this work. Following Ref. [32], the two-body part of White generator is written as an instance:
Here and denote particle states and hole states, which are above or below the Fermi momentum, respectively; and denote for normal-ordered one-body and two-body Hamiltonian, respectively. The particle-particle hole-hole configurations are the off-diagonal part. The two-body interaction matrix after normal-ordering is explicitly suppressed by (5) during the flow evolution. The IMSRG evolution is a first-order operator differential equation. In order to get precise and stable numerical results, Magnus expansion has been introduced in solving IMSRG equations [36]. One can rewrite as
By applying the Baker-Campbell-Hausdorff formula, we can get the evolution of as
Here is the -th Bernoulli number and the -order nested commutator is defined as
Therefore, the transformation of Hamiltonian is written as
Based on this framework, one can perform calculations of the ground state energy of a many-body system non-perturbatively. It has been pointed out that IMSRG could be regarded as kind of summation of MBPT diagrams to infinite order [32]. This means that IMSRG is a non-perturbative method and could invoke more correlations than MBPT when configuration space is fixed, which is important as the density increases.
A many-body operator could be given in second-quantized form as
In the flow equation, there are commutators of operators which may induce higher-order many-body terms beyond the original Hamiltonian. For instance, the commutation between two-body operators can induce three-body operators . The commutator in terms of creation and annihilation operators can be written as
The non-contracted four-body terms vanish after the commutation. The induced three-body terms can subsequently induce growing many-body terms beyond three-body terms, which means the unitary flow evolution would ultimately contain -body operators. Usually, we make a truncation on the flow equation, by dropping all terms higher than a specific order. If we drop and all induced terms higher than two-body operators, the scheme is called IMSRG(2). The terms with three-body forces are truncated at the normal-ordered two-body level. Fortunately the unitary transformations is almost kept with the truncation. There have been efforts to take back some induced terms that are dropped to improve IMSRG results [33, 34].
Interactions in Momentum Space
For calculations of nuclear matter, it is a natural choice to use plane wave basis with the periodic boundary condition. One can adopt discretized momentum within a cubic box [25]. Instead, we adopt a sphere in the momentum space to calculate the infinite matter. The number of nucleons is determined by the lattice points within a definite Fermi sphere. The number of nucleons is given by:
Here reflects the spin-isospin degeneracy and is 4 for SNM and 2 for PNM. denotes lattice points within the sphere. The lattice spacing is determined by the density in calculations, which is similar to Ref.[25]. There could be finite-size effect due to a finite box, but the estimation of finite-size corrections is very costly. The finite-size corrections have been verified in terms of kinetic energies and Hartree-Fock energies, which decrease rapidly with increasing the number of nucleons [25].
The hole-particle definition and normal-order procedure are both related to the Fermi sphere. As the first-order calculation of IMSRG, the Hartree-Fock (HF) energy in plane wave basis is given by summation as
where is the occupation number that equals 1 for holes and 0 for particles. In this work, we mainly adopt , corresponding to 4 shells in momentum spaces for neutron matter. Such a choice of parameter has been used in earlier works [25, 30] and it is relevant to the finite-size correlations. Afterwards, higher-order correlation energies can be calculated by invoking sufficient particle states beyond Fermi sphere until the convergence is reached. In this work, the convergence of the correlation energy is generally better than 0.1%.
Once we built the basis wave functions, we can write down the interaction matrix elements in momentum space. In most studies, chiral forces are fitted to nucleon-nucleon scattering experiments, and it is convenient to write the operators in partial-wave representation.
In some versions of chiral forces, regulators could be different for each partial wave [37, 38, 39]. The representation has been successfully adopted for nuclear matter calculations in the literature [22, 23, 40]. It is complicated to perform transformation from the representation into the momentum representation. In this work, the interaction matrix is written in the plane wave basis directly with momentum-dependent regulators. For tests, the Hartree-Fock energies obtained in the momentum representation have been benchmarked with calculations in the representation.
Generally, the chiral forces could be written as [16]:
Here and are related to momentum of in-state and out-state. The coefficients are defined by:
The emergence of three-body chiral interactions begins at NLO in chiral EFT and it is vital for nuclear matter calculation. It is known that the inclusion of 3N force is essential for reasonable descriptions of saturation properties of symmetric nuclear matter [40, 41]. The 3N force at NLO includes three terms:
In 3N chiral forces, , , and the breakdown scale of chiral EFT MeV are fixed physical constants. The parameters , have to be determined by calculations of finite nuclei. The parameters are constructed consistently with NLO two-body forces. The , parameters are taken from earlier works [25, 37, 42].
In practical calculations, one should apply regulators on the bare nuclear interactions. In addition, interactions should multiply a relativity factor. The detailed expressions of chiral interactions can be found in [20, 38, 39]. There are different types of regulators and in this work, the conventional local and nonlocal regulators are employed. The expressions of regulators are given in the later part of this work. Note that the choice of regulators can impact calculated EoS of nuclear matter at high densities [25].
Decomposition and Normal-Order
The interaction matrix elements can be calculated by performing complex matrix products. To improve both the speed and accuracy of our calculations, we use automatic plane-wave projection (aPWP) in symbolic Mathematica notebooks to deal with chiral nuclear forces, which is similar to automatic partial-wave decomposition (aPWD) technique [43, 44]. In aPWP, all potential terms are separated into coefficients and operators. The expectation values of operators can be calculated in advance. As an example, for the spin-spin operator , the whole spin space is the direct product of the spin spaces of two particles. Therefore, for two spin-up particles, the component can be calculated as
For combinations of quantum numbers, all possible values of an operator can be estimated efficiently by the decomposition. Using this technique, the direct matrix calculations are transformed into case selections in our code, so that calculations become much faster. We have separated spin and isospin spaces and finally we obtain four types of decomposition in advance:
Here and are Pauli matrices and is a casual vector. These four kinds of terms cover all operator structures associated with and interactions.
Presently, the operators related to three-body forces are truncated at the normal-ordered two-body level. The full three-body matrix elements are at the scale of , compared to for two-body forces. The treatment of residual three-body forces is a demanding task. Recently IMSRG(3) has been realized for calculations of some light nuclei [35]. The normal-ordered two-body Hamiltonian is written as
Here denotes the original two-body interaction element and denotes the three-body interaction element, as is the Kronecker symbol. The expression of zero-body and one-body normal-ordered Hamiltonian also have similar expressions, but have different coefficients [40, 45]. Finally all elements are constructed to be anti-symmetrized.
Other Many-Body Methods
In addition to IMSRG(2), we have built other many-body methods to calculate EoS of nuclear matter for benchmark and comparison purposes. We have calculated MBPT energy to the 4th order, and the coupled-cluster method is truncated at CCD including double excitations. All these three methods are based on HF energy as a start.
In MBPT2, the correlation energy beyond HF could be expressed as
The denominator is defined as
where stands for the HF single-particle energy. The MBPT2 correlation energy can be expressed diagrammatically by one Hugenholtz diagram and the MBPT3 energy contains three diagrams. Actually, the number of diagrams increases rapidly at higher orders and brings a challenge in MBPT calculations [40, 45, 46]. For example, there are 39 two-body Hugenholtz diagrams in MBPT4. As mentioned before, IMSRG is non-perturbative and has the capability to sum over diagrams in MBPT to infinite orders. MBPT2 is the summation of particle-particle hole-hole elements. In IMSRG(2) evolutions, MBPT2 can be seen as the off-diagonal part of IMSRG(2), reflecting how the suppression and evolution have been achieved.
Another method we use, CC, is also non-perturbative. In contrast to the unitary transformation in IMSRG, CC performs a non-unitary transformation and the evolved Hamiltonian is upper triangular, while the IMSRG Hamiltonian is block diagonal. The analytical formalism of double-excited coupled cluster (CCD) equation can be found in related literature [25, 45, 47]. Since IMSRG relies on unitary transformations, it is convenient to obtain many-body wave functions for future calculations.
Results
We have built up our program with Fortran 90 from scratch and employed OpenMP for parallel computations. Currently our code enables calculations of nuclear matter using MBPT, CCD and IMSRG(2).
Pure Neutron Matter
Firstly, it is necessary to benchmark our code with existing calculations. In Figure 1, the energy per particle of neutron matter are calculated with Minnesota and chiral potentials. Minnesota potential [48] has a simple form with components like spin-spin and isospin-isospin interactions and it is convenient for benchmark calculations. In our calculations, the number of nucleons are taken as for neutron matter and for symmetric matter. With the Minnesota potential, our IMSRG(2) results agree well with the CCD results in Ref.[25]. The NLOopt potential [37] with a cutoff of 500 MeV has also been adopted in our calculations. With NLOopt, the CCD calculations with the ladder approximation [24] are also benchmarked with Ref.[25], as shown in Figure 1.
Figure 1. Calculated energy per particle of pure neutron matter using Minnesota and NLOopt potentials for benchmarks. Dashed lines denote results in [25].
In Figure 2, the energy per particle from IMSRG(2) calculations with NLOopt are compared with that from different many-body methods. The results are shown up to 0.3 fm. Generally, IMSRG(2) results are very close to CCD results. The Hartree-Fock and CCD methods have also been benchmarked, as shown in the subfigure. Our MBPT2 and MBPT3 results agree well with calculations in Ref.[49]. In the intermediate density region below 0.2 fm, the MBPT3 results are close to that of configuration-interaction Monte Carlo (CIMC)[27]. In the low density region below 0.04 fm, results from different methods are close. In the high density region above 0.23 fm, MBPT3 becomes closer to IMSRG(2) and CCD. MBPT4 results generally are closer to IMSRG(2) compared to MBPT3. This can be understood that NLOopt potential is a soft interaction.
Figure 2. Calculated energy per particle of pure neutron matter using NLOopt interactions. Results from MBPT3, CCD and IMSRG(2), and CIMC from [27] are compared. The subfigure shows HF and CCD benchmarks with [25]. Deviations of MBPT3, MBPT4, CCD and CIMC to IMSRG2 are shown in the lower figure.
It is interesting to compare perturbative and non-perturbative many-body calculations with a harder nuclear interaction. In chiral nuclear forces, a higher cutoff usually results in a harder interaction. In this case, the higher-order many-body correlations are non-negligible and non-perturbative calculations are needed. In Figure 3, the energy per particle based on NLOopt with a cutoff of 500 MeV and NLO with a cutoff of 700 MeV are shown.
Figure 3. Calculated energy per particle of pure neutron matter using chiral forces with different cutoffs. Results from MBPT3, MBPT4 and IMSRG(2) are compared.
We see that with NLOopt, MBPT4 results are very close to IMSRG(2), while MBPT3 is slightly different from MBPT4. For NLO with a cutoff of 700 MeV[50], the results from different methods have significant discrepancies. It can be seen that MBPT4 results are relatively close to IMSRG(2) at densities below 0.2 fm.
Three-body nuclear forces are crucial for calculations of nuclear matter. In this work, we adopted NLOopt two-nucleon interactions plus three-body interactions that are normal-ordered to two-body level. For three-body forces, the regulators have both local and nonlocal formalism [25, 37]. The nonlocal regulator is written as,
Here the variable and denote the magnitude of Jacobi momentum of a given three-body state. For the nonlocal regulator with a cutoff of 500 MeV, we adopt and [25]. The energy per particle of neutron matter are calculated with different methods including three-body forces, as shown in Figure 4. With the same nuclear interaction, the results from CCD calculations are benchmarked, as shown in the subfigure. It can be seen that results from different many-body methods are generally close up to densities at 0.30 fm. IMSRG(2) results agree very well with CCD. The energies from MBPT3 is slightly above that from other three methods. MBPT4 is close to IMSRG(2) up to 0.2 fm. With three-body forces, the EoS of neutron matter becomes harder than that with only two-body forces in Figure 2.
Figure 4. Calculated energy per particle of pure neutron matter using NLOopt plus nonlocal interactions (=500MeV). Results from MBPT3,MBPT4, CCD and IMSRG(2) are compared. The upper subfigure shows the CCD calculations with three-body forces benchmarked with [25]. Deviations of MBPT3, MBPT4 and CCD to IMSRG2 are shown in the lower figure.
To study the dependence of regulators on the EoS of neutron matter, the energy per particle are calculated with both local and nonlocal regulators on three-body forces, as shown in Figure 5. The same two-body force NLOopt is employed and the three-body forces are dependent on regulators. The local regulator is written as:
Figure 5. Calculated energy per particle of pure neutron matter using NLOopt plus different forces. Results from MBPT3 and IMSRG(2) are compared. Calculations with different nuclear forces with local and nonlocal regulators are shown.
Here in the exponent factor denote transfer momentum and the index sums over the transfer momentum of three nucleons. For the local regulator with a cutoff of 400 MeV, we adopt and according to Ref. [25]. For a cutoff of 500 MeV, the parameters are taken as and . It is known that the contact terms have no contributions to neutron matter with a nonlocal regulator. It can be seen that, with NLOopt plus forces, the EoS with the nonlocal regulator is considerably harder than that with local regulators at higher densities. We see that MBPT3 results are slightly above IMSRG(2) in three calculations around the saturation density. However, MBPT3 becomes close to IMSRG(2) around two times of saturation density. Generally MBPT3 and IMSRG(2) results are close since the cutoff is not high.
Symmetric Nuclear Matter
For pure neutron matter, we demonstrated that IMSRG(2) results are close to perturbative calculations, except for the nuclear interaction is harder with a cutoff of 700 MeV. It has been pointed out that symmetric nuclear matter is a strongly correlated system, while pure neutron matter is a relatively weakly correlated system [30]. It is interesting to study the difference between perturbative and non-perturbative calculations for symmetric nuclear matter. We adopt both NLOopt ( MeV) and NLOsat [42] ( MeV), together with a nonlocal regulator for 3N forces to calculate the EoS of symmetric nuclear matter, as shown in Figure 6.
Figure 6. Calculated energy per particle of symmetric nuclear matter using NLOopt and NLOsat plus nonlocal 3N interactions. Results from MBPT2, MBPT3, CCD and IMSRG(2) are compared.
It can be seen that IMSRG(2) using NLOsat can better describe the empirical saturation point. Our calculations of symmetric nuclear matter using NLOsat agree reasonably with recent MBPT3 results [30]. We see that different methods have obvious discrepancies for symmetric nuclear matter above . Generally, MBPT2 results are close to CCD results at the normal-ordered two-body level. IMSRG(2) is above other methods and the differences become larger at higher densities. The discrepancies between different methods are more obvious in calculations with NLOsat, which is a relatively harder potential [30]. For NLOsat, the growing differences between MBPT2 and MBPT3 indicate that MBPT3 is not enough for symmetric nuclear matter at high densities. However, MBPT4 calculations of symmetric nuclear matter are extremely costly. It has been pointed out that the residual three-body force has non-negligible effects for symmetric matter[25], which will be our next step.
Discussions
In this work we have presented the development of the non-perturbative ab initio calculations of nuclear matter using In-Medium Similarity Renormalization Group method. IMSRG is an attractive many-body method based on continuous unitary transformations to include infinite summation of MBPT diagrams. IMSRG method has been applied in studies of finite nuclei in the literature, but has not been used for infinite nuclear matter yet. Our code is built from scratch and have been benchmarked with coupled-cluster calculations. The present work IMSRG(2) has been adapted to use chiral two-body forces and three-body forces truncated at the normal-ordered two-body level.
The code enables calculations of IMSRG(2), MBPT to 4th order and CCD based on the same Hartree-Fock start. The calculations with different methods have been compared. The energy per particle from different methods are close for pure neutron matter using two-body forces NLOopt, which is a soft interaction. In this case, MBPT4 is closer to IMSRG and CCD results compared to MBPT3. The situation is similar for calculations with three-body forces with a cutoff of 500 MeV. However, with a harder NLO nuclear force with a cutoff of 700 MeV, there is significant discrepancies between non-perturbative and perturbative calculations, in particular at higher density region. Similarly, there is obvious discrepancies between different methods for symmetric nuclear matter with a harder nuclear interaction NLOsat [42]. At the moment, our method is truncated at IMSRG(2) in the plane wave basis. It is costly to perform higher-order IMSRG calculations such as IMSRG(3) and IMSRG(3f2), which have been realized recently for finite nuclei [33, 34]. It is our next step to extend our calculations towards IMSRG(3) to treat harder interactions and residual three-body interactions. Such calculations should be insightful for studying EoS of dense nuclear matter.
Acknowledgments
We are grateful for useful discussions with B.S. Hu, W.G. Jiang. This work was supported by the National Key R&D Program of China (Grant No.2023YFE0101500, 2023YFA1606403, 2024YFA16106900), the National Natural Science Foundation of China under Grants No.12475118, 12335007, 12035001. We also acknowledge the funding support from the State Key Laboratory of Nuclear Physics and Technology, Peking University (No. NPT2023ZX01).
References
References
- [1]A. L. Watts et al., "Colloquium: Measuring the neutron star equation of state using x-ray timing," Rev. Mod. Phys. 88, 021001 (2016).DOI
- [2]G. Burgio, H.-J. Schulze, I. Vidaña, and J.-B. Wei, "Neutron stars and the nuclear equation of state," Progress in Particle and Nuclear Physics 120, 103879 (2021).DOI
- [3]L. Baiotti, "Gravitational waves from neutron star mergers and their relation to the nuclear equation of state," Progress in Particle and Nuclear Physics 109, 103714 (2019).DOI
- [4]E. Annala, T. Gorda, E. Katerini, A. Kurkela, J. Nättilä, V. Paschalidis, and A. Vuorinen, "Multimessenger constraints for ultradense matter," Phys. Rev. X 12, 011058 (2022).DOI
- [5]W. E. East, V. Paschalidis, F. Pretorius, and A. Tsokaros, "Binary neutron star mergers: Effects of spin and post-merger dynamics," Phys. Rev. D 100, 124042 (2019).DOI
- [6]J. Bamber, A. Tsokaros, M. Ruiz, and S. L. Shapiro, "Post-merger gravitational wave signals from binary neutron stars: Effect of the magnetic field," arXiv:2411.00943 [gr-qc] (2024).
- [7]S. Gandolfi, J. Carlson, S. Reddy, A. W. Steiner, and R. B. Wiringa, "The equation of state of neutron matter, symmetry energy and neutron star structure," The European Physical Journal A 50, 10 (2014).
- [8]K. Hebeler, J. M. Lattimer, C. J. Pethick, and A. Schwenk, "Constraints on chiral effective field theory interactions," Phys. Rev. Lett. 105, 161102 (2010).DOI
- [9]R. W. Romani, D. Kandel, A. V. Filippenko, T. G. Brink, and W. Zheng, "Psr J0952-0607: The fastest and heaviest known galactic neutron star," The Astrophysical Journal Letters 934, L17 (2022).DOI
- [10]M. Chen, D. Guan, C. Jiang, and J. Pei, "Speed of sound and phase transitions in neutron stars indicated by the thick neutron skin of ²⁰⁸Pb," Phys. Rev. C 108, 065806 (2023).arxiv.org/abs/2309.11245
- [11]O. Komoltsev and A. Kurkela, "How perturbative QCD constrains the equation of state at neutron-star densities," Phys. Rev. Lett. 128, 202701 (2022).DOI
- [12]P.-G. Reinhard, X. Roca-Maza, and W. Nazarewicz, "Combined Theoretical Analysis of the Parity-Violating Asymmetry for 48Ca and 208Pb," Phys. Rev. Lett. 129, 232501 (2022).DOI
- [13]A. Sorensen, K. Agarwal, K. W. Brown, Z. Chajecki, P. Danielewicz, C. Drischler, S. Gandolfi, J. W. Holt, M. Kaminski, C.-M. Ko et al., Prog. Part. Nucl. Phys. 134, 104080 (2024).
- [14]S. Weinberg, "Nuclear forces from chiral Lagrangians," Physics Letters B 251, 288 (1990).DOI
- [15]R. Machleidt and D. Entem, "Chiral effective field theory and nuclear forces," Physics Reports 503, 1 (2011).DOI
- [16]R. Machleidt and F. Sammarruca, "Recent advances in chiral EFT based nuclear forces and their applications," Progress in Particle and Nuclear Physics 137, 104117 (2024).arxiv.org/abs/2402.14032
- [17]H. Hergert, "A guided tour of ab initio nuclear many-body theory," Frontiers in Physics 8, 379 (2020).DOI
- [18]S. M. Wang, Z. H. Sun, Y. Z. Ma, and F. R. Xu, "Deformed in-medium similarity renormalization group," Phys. Rev. C 105, L061303 (2022).DOI
- [19]X.-Y. Xu, S.-Q. Fan, Q. Yuan, B.-S. Hu, J.-G. Li, S.-M. Wang, and F.-R. Xu, "Progress in ab initio in-medium similarity renormalization group and coupled-channel method with coupling to the continuum," Nuclear Science and Techniques 35, 215 (2024).DOI
- [20]K. Hebeler, "Three-nucleon forces: Implementation and applications to atomic nuclei and dense matter," Physics Reports 890, 1 (2021).DOI
- [21]L. Coraggio, J. W. Holt, N. Itaco, R. Machleidt, and F. Sammarruca, "Reduced regulator dependence of neutron-matter predictions with perturbative chiral interactions," Phys. Rev. C 87, 014322 (2013).DOI
- [22]C. Drischler, K. Hebeler, and A. Schwenk, "Chiral interactions up to next-to-next-to-next-to-leading order and nuclear saturation," Phys. Rev. Lett. 122, 042501 (2019).DOI
- [23]C. Drischler, R. J. Furnstahl, J. A. Melendez, and D. R. Phillips, "How well do we know the neutron-matter equation of state at the densities inside neutron stars? A Bayesian approach with correlated uncertainties," Phys. Rev. Lett. 125, 202702 (2020).DOI
- [24]G. Baardsen, A. Ekström, G. Hagen, and M. Hjorth-Jensen, "Coupled-cluster studies of infinite nuclear matter," Phys. Rev. C 88, 054312 (2013).DOI
- [25]G. Hagen, T. Papenbrock, A. Ekström, K. A. Wendt, G. Baardsen, S. Gandolfi, M. Hjorth-Jensen, and C. J. Horowitz, "Coupled-cluster calculations of nucleonic matter," Phys. Rev. C 89, 014319 (2014).DOI
- [26]M. Piarulli, I. Bombaci, D. Logoteta, A. Lovato, and R. B. Wiringa, "Benchmark calculations of pure neutron matter with realistic nucleon-nucleon interactions," Phys. Rev. C 101, 045801 (2020).DOI
- [27]P. Arthuis, C. Barbieri, F. Pederiva, and A. Roggero, "Quantum Monte Carlo calculations in configuration space with three-nucleon forces," Phys. Rev. C 107, 044303 (2023).DOI
- [28]A. Carbone, A. Rios, and A. Polls, "Correlated density-dependent chiral forces for infinite-matter calculations within the Green’s function approach," Phys. Rev. C 90, 054322 (2014).DOI
- [29]A. Carbone, A. Polls, and A. Rios, "Symmetric nuclear matter with chiral three-nucleon forces in the self-consistent Green’s functions approach," Phys. Rev. C 88, 044302 (2013).DOI
- [30]F. Marino, W. G. Jiang, and S. J. Novario, "Diagrammatic ab initio methods for infinite nuclear matter with modern chiral interactions," Phys. Rev. C 110, 054322 (2024).arxiv.org/abs/2407.17098
- [31]K. Tsukiyama, S. K. Bogner, and A. Schwenk, "In-medium similarity renormalization group for nuclei," Phys. Rev. Lett. 106, 222502 (2011).DOI
- [32]H. Hergert, S. K. Bogner, T. D. Morris, A. Schwenk, and K. Tsukiyama, "The in-medium similarity renormalization group: A novel ab initio method for nuclei," Physics Reports 621, 165 (2016).DOI
- [33]B. C. He and S. R. Stroberg, "Factorized approximation to the in-medium similarity renormalization group IM-SRG(3)," Phys. Rev. C 110, 044317 (2024).DOI
- [34]S. R. Stroberg, T. D. Morris, and B. C. He, "In-medium similarity renormalization group with flowing 3-body op- erators and approximations thereof," Phys. Rev. C 110, 044316 (2024).DOI
- [35]M. Heinz, A. Tichai, J. Hoppe, K. Hebeler, and A. Schwenk, "In-medium similarity renormalization group with three-body operators," Phys. Rev. C 103, 044318 (2021).DOI
- [36]T. D. Morris, N. M. Parzuchowski, and S. K. Bogner, "Magnus expansion and in-medium similarity renormalization group," Phys. Rev. C 92, 034331 (2015).DOI
- [37]A. Ekström, G. Baardsen, C. Forssén, G. Hagen, M. Hjorth-Jensen, G. R. Jansen, R. Machleidt, W. Nazarewicz, T. Papenbrock, J. Sarich, and S. M. Wild, "Optimized chiral nucleon-nucleon interaction at next-to-next-to-leading order," Phys. Rev. Lett. 110, 192502 (2013).pubmed.ncbi.nlm.nih.gov/23705702
- [38]D. R. Entem, N. Kaiser, R. Machleidt, and Y. Nosyk, "Peripheral nucleon-nucleon scattering at fifth order of chiral perturbation theory," Phys. Rev. C 91, 014002 (2015).DOI
- [39]D. R. Entem, R. Machleidt, and Y. Nosyk, "High-quality two-nucleon potentials up to fifth order of the chiral expansion," Phys. Rev. C 96, 024004 (2017).DOI
- [40]C. Drischler, Nuclear matter from chiral effective field theory, Ph.D. thesis, Technical University of Dortmund (2017).DOI
- [41]K. Hebeler and A. Schwenk, "Chiral three-nucleon forces and neutron matter," Phys. Rev. C 82, 014314 (2010).DOI
- [42]A. Ekström, G. R. Jansen, K. A. Wendt, G. Hagen, T. Papenbrock, B. D. Carlsson, C. Forssén, M. Hjorth-Jensen, P. Navrátil, and W. Nazarewicz, "Accurate nuclear radii and binding energies from a chiral interaction," Phys. Rev. C 91, 051301 (2015).DOI
- [43]R. Skibiński, J. Golak, K. Topolnicki, H. Witała, H. Kamada, W. Glöckle, and A. Nogga, "The Tucson-Melbourne three-nucleon force in the automatized partial-wave decomposition," The European Physical Journal A 47, 48 (2011).DOI
- [44]J. Golak, D. Rozpędzik, R. Skibiński, K. Topolnicki, H. Witała, W. Glöckle, A. Nogga, E. Epelbaum, H. Kamada, C. Elster, and I. Fachruddin, "A new way to perform partial-wave decompositions of few-nucleon forces," The European Physical Journal A 43, 241 (2010).DOI
- [45]I. Shavitt and R. J. Bartlett, Many-body Methods in Chemistry and Physics: MBPT and Coupled-Cluster Theory, Cambridge University Press (2009).
- [46]P. Arthuis, T. Duguet, A. Tichai, R.-D. Lasseri, and J.-P. Ebran, "ADG: Automated generation and evaluation of many-body diagrams I. Bogoliubov many-body perturbation theory," Computer Physics Communications 240, 202 (2019).DOI
- [47]M. Hjorth-Jensen, M. P. Lombardo, and U. Van Kolck, An advanced course in computational nuclear physics, Springer Lecture Notes in Physics, Vol. 936, Springer (2017).DOI
- [48]D. R. Thompson, M. Lemere, and Y. C. Tang, "Systematic investigation of scattering problems with the resonating-group method," Nuclear Physics A 286, 53 (1977).DOI
- [50]H. Y. Shang, R. Z. Hu, J. C. Pei, and F. R. Xu, "Properties of the chiral nucleon-nucleon interaction at N3LO with high cutoffs studied with a local projection approach," Phys. Rev. C 110, 054003 (2024).arxiv.org/abs/2401.16696