betaFeedback

WorksPhysics and Astronomy

Energy landscape and dissipation of sliding magnetic rotor arrays

Abstract

Magnetically coupled damped rotational degrees of freedom can give rise to tribological loss when excited by a relative sliding motion, linking friction to the dynamics of magnetic moments. We analytically investigate such magnetic friction by studying a recently introduced simplified model for a rigid magnetic rotor array sliding over a commensurate magnetic substrate. Here, the array rotors can rotate about an axis perpendicular to the sliding direction and are damped by microscopic shaft friction, while the substrate magnets have a fixed in-plane orientation. The simplified model reduces the collective rotor dynamics of this setup to a set of coupled nonlinear differential equations, which can be studied by the corresponding energy landscape in the quasi-static regime. We find that the parameter plane spanned by layer separation and time can be divided into distinct chambers, in which the structure of the energy landscape remains invariant. Using these chambers, we identify the layer separation intervals corresponding to different dynamical states and recover the emergence of a regime where the moment alignment alternates globally while exhibiting peak dissipation. Additionally, we derive the leading nontrivial orders of the collective magnetic friction in the regimes of small and large gaps between the array and the substrate. For the alternating regime, we find that friction can be computed by tracking energy jumps from unstable to stable critical points at the chamber boundaries. These results provide an analytical foundation for the observed dynamics and dissipation in sliding rotor arrays. Because the simplified model is scale-free, our conclusions transfer across a broad range of microscopic and macroscopic length scales.

Introduction

Sliding friction occurs when the surfaces of two layers are in direct contact or interact via fields while moving relative to each other. The corresponding dissipated energy is fundamentally encoded in the morphology of the layer materials and configurational patterns on the surfaces. As friction is therefore intrinsically linked to structure, surprising phenomena and dissipation anomalies can emerge when particle configurations and internal degrees of freedom suddenly or continuously change during sliding. For instance, an increase in frictional forces has been predicted [1, 2] and experimentally measured via scanning probe microscopy for substrate layers that are close to continuous [3] and first-order [4, 5] phase transitions.

Systems where such structural changes can be linked to reorientations of rotational degrees of freedom are magnetic materials. Here, the phenomenon of magnetic friction [6, 7, 8, 9] can emerge when magnetic interactions between tip-substrate setups or sliding layers result in spin excitations, domain wall motion, or collective dynamics [10, 11, 12, 13, 14, 15]. The associated energy dissipation and nonequilibrium phase behavior have been extensively explored in theoretical studies, often using model systems such as Ising layers [16, 17, 18, 19] or Heisenberg spin assemblies [20, 21, 22, 23]. In these approaches, the materials are typically driven out of equilibrium either by relative motion, such as sliding [24, 25, 26, 27] and rotation [28], or by imposed shear [29, 30, 31].

A recently introduced macroscopic model system enables the study of magnetic friction on a length scale accessible with the naked eye [15, 32]. The setup consists of an array of damped magnetic rotors (the slider) that moves relative to a substrate containing a commensurate lattice of millimeter-sized magnets [15]. Each rotor on the slider is itself a millimeter-scale magnet that can freely rotate under microscopic shaft friction about an axis perpendicular to the sliding direction. In contrast, the magnets embedded in the substrate have fixed orientations with in-plane magnetization. A detailed schematic of the experimental configuration can be found in Ref. [15] and is shown in Figure 1.

Sketch of the slider-substrate setup

Figure 1. Sketch of the slider-substrate setup considered in this work. Two magnetic layers, each containing a square lattice of magnetic moments with lattice constant PP, move relative to one another with velocity vv. The substrate moments msub\mathbf{m}_{\mathrm{sub}} have a fixed orientation along the positive xx-direction, while the slider moments mij\mathbf{m}_{ij} can rotate about the yy-axis. The index ii labels the position along the xx-axis, and the index jj labels the position along the yy-axis. The layer separation is denoted by hh, and the rotational degrees of freedom of the slider moments are described by the angles θij\theta_{ij}.

Sliding the rotor array relative to the substrate reveals a pronounced peak in magnetic friction with a distinctly non-monotonic dependence on the layer separation [15, 32]. Interestingly, maximum friction occurs when the slider magnets undergo frequent changes in the collective order, which aligns with the idea of dissipation anomalies at configurational transitions [1, 2]. At small separations, the magnetic moments of the slider align parallel, forming a ferromagnetic state that rotates synchronously with the sliding motion; in this regime, the friction remains weak. At large separations, the slider settles into a static antiferromagnetic configuration in which neighboring moments are parallel along the sliding direction but antiparallel across it, resulting in negligible rotor motion and correspondingly low friction. At intermediate separations, however, the system repeatedly switches between the ferromagnetic and antiferromagnetic states, leading to hysteresis, which dissipates energy.

To support the experimental observations and numerical simulations, a simplified theoretical model was introduced that reduces the system to two effective degrees of freedom [15]. The model retains only nearest-neighbor interactions and groups the magnetic moments into two sublattices. All moments within each sublattice are assumed to be identical, which substantially reduces the complexity of the problem. Despite its minimal construction, the resulting equations of motion successfully capture the three characteristic regimes observed in the full system.

So far, the simplified model was mostly studied numerically, and a comprehensive analytical treatment of the model is still missing. In this work, we provide such an analysis by examining the energy landscape of the simplified rotor-array model. In particular, we show that the parameter plane spanned by the layer separation and time can be rigorously divided into distinct chambers. Within each chamber, the energy landscape remains structurally invariant: the number and the Morse type [33] of critical points, as well as the relative orientation of the magnetic moments corresponding to a particular critical point, are constant. Using this chamber decomposition, we can infer the dynamical behavior of the slider, mapping out the exact layer separation intervals that correspond to each dynamical regime. In addition, we analytically derive the nontrivial leading order terms of the magnetic friction for the regimes of particularly small and large gaps between the slider and the substrate. In the regime of an alternating magnetic arrangement, we derive that the magnetic friction can be calculated by tracking the perturbation-triggered energy jumps from unstable to stable critical points at the boundaries of the different chambers.

This work is structured as follows: First, § 2 introduces a generalized, dimensionless version of the simplified model from Ref. [15], which uses NN degrees of freedom for an N×NN \times N rotor array. For readers unfamiliar with the findings of Ref. [15], § 3 provides a brief summary of the expected dynamical behavior and magnetic friction for the rotor array-substrate setup. In § 4, we derive the chamber decomposition of the energy landscape for a two-degree-of-freedom model by calculating both the bifurcation curves of the critical points and the boundaries where the relative alignment of the magnetic moments changes. We also validate these analytical findings numerically. Then, we derive estimates for the magnetic friction across the different dynamical regimes in § 8. Finally, Sec. VI concludes the paper with a discussion of our results and their broader implications.

Foundations of the Simplified Model

We consider the slider-substrate setup as described in Ref. [15], which consists of a square array of magnets with lattice constant PP and a commensurate magnetic substrate (See Figure 1 for a sketch of the setup). The slider (i.e., the rotor array) contains N×NN \times N magnetic dipoles with magnetic moments mij\mathbf{m}_{ij}, each of which can rotate about the yy-axis. Here, the first index ii labels the lattice position along the xx-direction, which is also the direction of the slider’s translation, while the second index jj labels the position along the yy-direction. The dipole orientations are described by angles θij\theta_{ij}, measured relative to the positive xx-axis and increasing under clockwise rotation [i.e., mij∝(cos⁡(θij),0,−sin⁡(θij))T\mathbf{m}_{ij} \propto(\cos(\theta_{ij}), 0, -\sin(\theta_{ij}))^{\mathsf{T}}] looking at the xzxz plane with the xx-axis pointing from left to right]. The internal magnetic energy of the slider is given by

HI=12∑ijkm(i,j)≠(k,m)E(mij,mkm)(1)\mathcal{H}_{\mathrm{I}} = \frac{1}{2}\sum_{\substack{ijkm\\(i,j)\ne(k,m)}} E(\mathbf{m}_{ij},\mathbf{m}_{km}) \tag*{(1)}

with the interaction energy corresponding to two magnetic dipoles with center separation vector r\mathbf{r}

E(mij,mkm)=μ04π∣r∣3[mij⋅mkm−3(mij⋅r)(mkm⋅r)∣r∣2].(2)E(\mathbf{m}_{ij},\mathbf{m}_{km}) = \frac{\mu_0}{4\pi\lvert\mathbf{r}\rvert^3} \left[ \mathbf{m}_{ij}\cdot\mathbf{m}_{km} - \frac{3(\mathbf{m}_{ij}\cdot\mathbf{r})(\mathbf{m}_{km}\cdot\mathbf{r})}{\lvert\mathbf{r}\rvert^2} \right]. \tag*{(2)}

Although dipolar interactions are long-ranged, the results of Ref. [15] indicate that restricting the interaction to nearest neighbors is sufficient to qualitatively reproduce both the characteristic dynamical behavior and the non-monotonic peak in sliding friction. Additionally, the corresponding experiments already demonstrated that, for fixed jj, the angles θij\theta_{ij} are approximately equal when the system occupies the relevant minima of the energy landscape during sliding. In the following, we make use of these two observations to derive a simplified form of HI\mathcal{H}_{\mathrm{I}}: we truncate the interaction energy at the nearest neighbors and reduce the number of degrees of freedom in direct analogy with Ref. [15].

First, we simplify the interaction energy of the magnetic moments within the same row jj. Assuming nearest-neighbor interactions and parallel magnetic moments, one readily finds

∑iE(mij,m(i+1)j)=μ0m02N4πP3[3sin⁡2(θj)−2].(3)\sum_i E(\mathbf{m}_{ij},\mathbf{m}_{(i+1)j}) = \frac{\mu_0 m_0^2 N}{4\pi P^3} \left[3\sin^2(\theta_j)-2\right]. \tag*{(3)}

where θij=θj\theta_{ij}=\theta_j for all ii, m0=∣mij∣m_0=\lvert\mathbf{m}_{ij}\rvert for all i,ji,j, and we assume an even NN together with periodic boundary conditions m(N+1)j=m1j\mathbf{m}_{(N+1)j}=\mathbf{m}_{1j} for simplicity. The total interaction energy between two neighboring rows jj and j+1j+1 can be simplified in the same manner, which yields

∑iE(mij,mi(j+1))=μ0m02N4πP3cos⁡(θj−θj+1),(4)\sum_i E(\mathbf{m}_{ij},\mathbf{m}_{i(j+1)}) = \frac{\mu_0 m_0^2 N}{4\pi P^3}\cos(\theta_j-\theta_{j+1}), \tag*{(4)}

again with periodic boundaries mi(N+1)=mi1\mathbf{m}_{i(N+1)}=\mathbf{m}_{i1}. Consequently, the full internal interaction energy of the slider reduces to

HIε=∑j[3sin⁡2(θj)+cos⁡(θj−θj+1)]+const.=∑j[−32cos⁡(2θj)+cos⁡(θj−θj+1)]+const.,(5)\begin{aligned} \frac{\mathcal{H}_{\mathrm{I}}}{\varepsilon} = \sum_j \left[3\sin^2(\theta_j)+\cos(\theta_j-\theta_{j+1})\right]+\mathrm{const.} \\ &= \sum_j \left[-\frac{3}{2}\cos(2\theta_j)+\cos(\theta_j-\theta_{j+1})\right]+\mathrm{const.}, \tag*{(5)} \end{aligned}

where ε=μ0m02N/4πP3\varepsilon=\mu_0m_0^2N/4\pi P^3 is the interaction energy scale.

The slider moves with constant velocity vv in the xx-direction while hovering above a periodic substrate at a fixed separation hh. The substrate consists of a square array of magnets with lattice constant PP, whose magnetic moments are aligned along the xx-direction. As argued in Ref. [15], the interaction between the slider moments and the substrate moments can be effectively captured by a periodic driving term of the form 1

Hsub=∑jμ0m0msubN4πh3cos⁡(θj−kvt).(6)\mathcal{H}_{\mathrm{sub}}=\sum_j\frac{\mu_0m_0m_{\mathrm{sub}}N}{4\pi h^3}\cos(\theta_j-kvt). \tag*{(6)}

Here, k=2π/Pk=2\pi/P and msubm_{\mathrm{sub}} denotes the magnitude of the substrate magnetic moments using a dipole approximation. The resulting simplified total energy is

Hε=∑j[−32cos⁡(2θj)+cos⁡(θj−θj+1)+Acos⁡(θj−v~t)]+const.,(7)\begin{aligned} \frac{\mathcal{H}}{\varepsilon}=\sum_j\left[-\frac{3}{2}\cos(2\theta_j)+\cos(\theta_j-\theta_{j+1})+A\cos(\theta_j-\tilde{v}t)\right] \\ &+\mathrm{const.,} \tag*{(7)} \end{aligned}

with A=(P/h)3(msub/m0)A=(P/h)^3(m_{\mathrm{sub}}/m_0) and v~=kv\tilde{v}=kv. 2

The three terms in Eq. (7) have distinct physical roles: The term proportional to −cos⁡(2θj)-\cos(2\theta_j) favors alignment of each row along the xx-direction, the coupling term cos⁡(θj−θj+1)\cos(\theta_j-\theta_{j+1}) favors alternating orientations between neighboring rows, and the final term couples each row to the phase of the drive, which mimics the substrate moving relative to the slider. The dimensionless separation parameter AA therefore measures the relative strength of the substrate contribution to the total energy compared to the internal magnetic interaction of the slider. Large AA corresponds to small layer separation hh and strong substrate coupling, while small AA corresponds to large separation hh and weak substrate coupling.

Assuming overdamped dynamics and modeling dissipation due to the microscopic shaft friction via a Stokes drag, the equations of motion are

θ˙j=−1Γ∂H∂θj,(8)\dot{\theta}_j=-\frac{1}{\Gamma}\frac{\partial\mathcal{H}}{\partial\theta_j}, \tag*{(8)}

where Γ=εγ\Gamma=\varepsilon\gamma is the effective friction coefficient describing the total dissipation associated with the rotation of all moments in row jj. In detail, assuming the microscopic shaft-friction coefficient for a single rotor is ξ\xi, the effective coefficient for a full line of moments is Γ=Nξ\Gamma=N\xi. 34

Inserting the total energy function, the simplified equations of motion become

γθ˙j=−3sin⁡(2θj)+sin⁡(θj−θj+1)+sin⁡(θj−θj−1)\gamma\dot{\theta}_j=-3\sin(2\theta_j)+\sin(\theta_j-\theta_{j+1})+\sin(\theta_j-\theta_{j-1})
+Asin⁡(θj−v~t),(9){}+A\sin(\theta_j-\tilde{v}t), \tag*{(9)}

which describe a set of overdamped, trigonometricly coupled mathematical pendulums driven by a traveling wave. Under the additional assumption of only two degrees of freedom—namely, θj=θj+2≡θe\theta_j=\theta_{j+2}\equiv\theta_e for even jj and θj=θj+2≡θo\theta_j=\theta_{j+2}\equiv\theta_o for odd jj—these equations reduce to a dimensionless form of the simplified model proposed in Ref. [15] (where γ\gamma can be absorbed in the time variable to set a dimensionless time-scale if needed). 5

Notice that the derived equations of motion (9) share the structure of a Frenkel Kontorova model [34, 35], featuring trigonometric coupling potentials together with a trigonometric driving term. Strikingly, the energy contribution associated with the internal energy of each row jj plays the role typically attributed to the substrate potential in a conventional Frenkel-Kontorova model, whereas the magnetic substrate in our setup effectively acts as the external driving. Additionally, the simplified model and its energy function (7) resemble the Hamiltonian of the recently introduced extended Stoner–Wohlfarth model for generalized van der Waals magnetic materials, such as A-type antiferromagnets [36], in the limit of zero interlayer stiffness and for a rotating external field. See also other commonly used models for (anti)ferromagnetic materials, which exhibit similarly structured energy landscapes [37, 38]. These similarities to established model systems highlight the versatility and generality of our simplified model despite the strong assumption. Under this broader view, our subsequent derivations apply to any system with a Hamiltonian of this form.

Throughout this work we focus on the quasi-static regime. By this we mean that the energy landscape changes slowly compared to the relaxation of the rotor angles, so that the system remains close to a stable minimum of the instantaneous energy landscape. In the simplified model, γ\gamma sets the relaxation time of the rotor angles, while (2π/v~)(2\pi/\tilde{v}) sets the time scale on which the substrate phase changes. The quasi-static limit is therefore characterized by γv~≪2π\gamma\tilde{v} \ll2\pi. This limit allows us to infer the driven dynamics from the structure of the energy landscape: the system follows a stable minimum until it disappears or loses stability, at which point it relaxes to another available minimum. This is the standard behavior of slowly driven dissipative systems near dynamic bifurcations [39].

References

  1. [1]A. Benassi, A. Vanossi, G. E. Santoro, and E. Tosatti, Sliding over a phase transition, Phys. Rev. Lett. 106, 256102 (2011).
  2. [2]F. Iglói, M. Pleimling, and L. Turban, Nonequilibrium phase transition in a driven potts model with friction, Phys. Rev. E 83, 041110 (2011).
  3. [3]M. Kisiel, F. Pellegrini, G. E. Santoro, M. Samadashvili, R. Pawlak, A. Benassi, U. Gysin, R. Buzio, A. Gerbi, E. Meyer, and E. Tosatti, Noncontact atomic force microscope dissipation reveals a central peak of striO3 structural phase transition, Phys. Rev. Lett. 115, 046101 (2015).pubmed.ncbi.nlm.nih.gov/26252695
  4. [4]E. Panizon, T. Marx, D. Dietzel, F. Pellegrini, G. E. Santoro, A. Schirmeisen, and E. Tosatti, Friction anomalies at first-order transition spinodals: 1T-TaS2, New J. Phys. 20, 023033 (2018).DOI
  5. [5]W. Wang, D. Dietzel, C. Liu, and A. Schirmeisen, Nanoscale friction across the first-order charge density wave phase transition of 1T-TaS2, ACS Appl. Mater. Interfaces. 15, 4774 (2023).DOI
  6. [6]A. Heinrich, Magnetic friction is a sticky business, Physics 5, 102 (2012).DOI
  7. [7]B. Wolter, Y. Yoshida, A. Kubetzka, S.-W. Hla, K. von Bergmann, and R. Wiesendanger, Spin friction observed on the atomic scale, Phys. Rev. Lett. 109, 116102 (2012).pubmed.ncbi.nlm.nih.gov/23005651
  8. [8]Y. Li and W. Guo, Spin friction in two-dimensional antiferromagnetic crystals, Phys. Rev. B 97, 104302 (2018).DOI
  9. [9]X. Cai, J. Wang, J. Li, Q. Sun, and Y. Jia, Spin friction between Co monolayer and Mn/W(110) surface: Ab initio investigations, Tribol. Int. 95, 419 (2016).DOI
  10. [10]P. Grütter, Y. Liu, P. LeBlanc, and U. Dürig, Magnetic dissipation force microscopy, Appl. Phys. Lett. 71, 279 (1997).DOI
  11. [11]C. Fusco, D. E. Wolf, and U. Nowak, Magnetic friction of a nanometer-sized tip scanning a magnetic surface: Dynamics of a classical spin system with direct exchange and dipolar interactions between the spins, Phys. Rev. B 77, 174426 (2008).DOI
  12. [12]M. P. Magiera, L. Brendel, D. E. Wolf, and U. Nowak, Spin excitations in a monolayer scanned by a magnetic tip, EPL 87, 26002 (2009).DOI
  13. [13]V. Démery and D. S. Dean, Drag forces in classical fields, Phys. Rev. Lett. 104, 080601 (2010).pubmed.ncbi.nlm.nih.gov/20366922
  14. [14]I. Rissanen and L. Laurson, Magnetic non-contact friction from domain wall dynamics actuated by oscillatory mechanical motion, J. Phys. D: Appl. Phys. 52, 445002 (2019).DOI
  15. [15]H. Gu, A. Lüders, and C. Bechinger, Non-monotonic magnetic friction from collective rotor dynamics, Nat. Mater. 25, 767 (2026).DOI
  16. [16]D. Kadau, A. Hucht, and D. E. Wolf, Magnetic friction in ising spin systems, Phys. Rev. Lett. 101, 137205 (2008).pubmed.ncbi.nlm.nih.gov/18851490
  17. [17]H. Komatsu, Model of magnetic friction with infinite-range interaction, Phys. Rev. E 102, 062131 (2020).DOI
  18. [18]H. Komatsu, Relaxation process of magnetic friction under sudden changes in velocity, Phys. Rev. E 104, 014126 (2021).DOI
  19. [19]H. Komatsu, Transition between the stick and slip states in a simplified model of magnetic friction, Phys. Rev. E 108, 034803 (2023).DOI
  20. [20]M. P. Magiera, L. Brendel, D. E. Wolf, and U. Nowak, Spin waves cause non-linear friction, EPL 95, 17010 (2011).DOI
  21. [21]M. P. Magiera, S. Angst, A. Hucht, and D. E. Wolf, Magnetic friction: From stokes to coulomb behavior, Phys. Rev. B 84, 212301 (2011).DOI
  22. [22]M. P. Magiera, Energy dissipation of moved magnetic vortices, EPL 103, 57004 (2013).
  23. [23]M. P. Magiera and S. Schulz, Magnetic vortices induced by a monopole tip, IEEE Trans. Magn. 50, 1 (2014).DOI
  24. [24]L. Li and M. Pleimling, Three-dimensional nonequilibrium potts systems with magnetic friction, Phys. Rev. E 93, 042122 (2016).DOI
  25. [25]I. Rissanen and L. Laurson, Moving magnets in a micromagnetic finite-difference framework, Phys. Rev. E 97, 053301 (2018).DOI
  26. [26]H. Komatsu, Model of magnetic friction obeying the dieterich-ruina law in the steady state, Phys. Rev. E 100, 052130 (2019).DOI
  27. [27]K. Sugimoto, Effects of boundary conditions on magnetic friction, Phys. Rev. E 99, 052103 (2019).DOI
  28. [28]H. J. Hilhorst, Two interacting ising chains in relative motion, J. Stat. Mech.: Theory Exp. 2011, P04009 (2011).DOI
  29. [29]A. Hucht, Nonequilibrium phase transition in an exactly solvable driven ising model with friction, Phys. Rev. E 80, 061138 (2009).pubmed.ncbi.nlm.nih.gov/20365149
  30. [30]S. Angst, A. Hucht, and D. E. Wolf, Strongly anisotropic nonequilibrium phase transition in ising models with friction, Phys. Rev. E 85, 051120 (2012).pubmed.ncbi.nlm.nih.gov/23004716
  31. [31]A. Hucht and S. Angst, Sheared ising models in three dimensions, EPL 100, 20003 (2012).
  32. [32]A. Niguëas and A. Siria, Magnetic drag from frustrated order, Nat. Mater. 25, 707 (2026).
  33. [33]J. Milnor, Morse Theory, Annals of Mathematics Studies No. 51 (Princeton University Press, Princeton, NJ, 1963).
  34. [34]O. M. Braun and Y. S. Kivshar, The FrenkelKontorova model: concepts, methods, and applications, J. Phys. IV Proc. 9, 3 (1999).
  35. [35]L. M. Flória and J. J. Mazo, Dissipative dynamics of the frenkel-kontorova model, Adv. Phys. 45, 505 (1996).DOI
  36. [36]Z. Wang, Y. Xiang, R. Chen, Z. Sun, C. Hong, X. Chen, J. Gao, S. Wu, Z. Guo, Y. Chen, Q. Mi, Z. Liu, S. Yan, H. Lei, W. Ruan, Y. Zhang, W. Yu, W.-T. Liu, Z. Yuan, and S. Wu, Ferromagnet-like binary switching of a Stoner–Wohlfarth antiferromagnet, Nature 650, 340 (2026).DOI
  37. [37]B. Negulescu, D. Lacour, M. Hehn, A. Gerken, J. Paul, and C. Duret, On the control of spin flop in synthetic antiferromagnetic films, J. Appl. Phys. 109, 103911 (2011).DOI
  38. [38]S. Yang, X. Xu, Y. Zhu, R. Niu, C. Xu, Y. Peng, X. Cheng, X. Jia, Y. Huang, X. Xu, J. Lu, and Y. Ye, Odd-even layer-number effect and layer-dependent magnetic phase diagrams in MnBi2Te4, Phys. Rev. X 11, 011003 (2021).DOI
  39. [39]N. Berglund, Dynamic bifurcations: Hysteresis, scaling laws and feedback control, Progress of Theoretical Physics Supplement 139, 325 (2000).
  40. [40]P. Virtanen, R. Gommers, T. E. Oliphant, et al., SciPy 1.0: Fundamental algorithms for scientific computing in Python, Nature Methods 17, 261 (2020).
  41. [41]E. Hairer and G. Wanner, Solving Ordinary Differential Equations II: Stiff and Differential-Algebraic Problems, 2nd ed., Springer Series in Computational Mathematics, Vol. 14 (Springer, Berlin, Heidelberg, 1996).
  42. [42]R. Gilmore, Catastrophe Theory for Scientists and Engineers, reprint, revised ed. (Courier Corporation (Dover Publications), 1993) p. 666.
  43. [43]S. H. Strogatz, Nonlinear Dynamics and Chaos: With Applications to Physics, Biology, Chemistry, and Engineering, 2nd ed. (CRC Press, 2018) p. 532, first published 2015 by Westview Press.
  44. [44]S. Smale, On gradient dynamical systems, Ann. Math. Second Series, 74, 199 (1961).
  45. [45]J. C. Mauro, Energy landscapes, in Materials Kinetics: Transport and Rate Phenomena (Elsevier (Academic Press), 2021) Chap. 18, pp. 315–326.
  46. [46]D. J. Wales, Decoding the energy landscape: extracting structure, dynamics and thermodynamics, Philos. trans., Math. phys. eng. sci. 370, 2877 (2012).DOI
  47. [47]R. Suzuki and T. Adachi, An energy landscape-based theoretical framework for understanding the self-organization of functions in a living system under the dynamical component interaction, BioSystems 258, 105631 (2025).DOI
  48. [48]L. Angelani, R. Di Leonardo, G. Ruocco, A. Scala, and F. Sciortino, Topological description of the aging dynamics in simple glasses, Phys. Rev. Lett. 87, 055502 (2001).
  49. [49]O. Dauchot and V. Démery, Dynamics of a self-propelled particle in a harmonic trap, Phys. Rev. Lett. 122, 068002 (2019).DOI
  50. [50]R. Rusch, O. Chepizhko, and T. Franosch, Intermediate scattering function of a gravitative circle swimmer, Phys. Rev. E 110, 054606 (2024).
  51. [51]R. Rusch and T. Franosch, Intermediate scattering function of brownian particles in a tilted cosine potential, Phys. Rev. E 114, 014127 (2026).DOI
  52. [52]T. Baumberger and C. Caroli, Solid friction from stickslip down to pinning and aging, Adv. Phys. 55, 279 (2006).DOI
  53. [53]B. N. J. Persson, Sliding Friction: Physical Principles and Applications, 2nd ed., NanoScience and Technology (Springer Berlin, Heidelberg, 2000).DOI
  54. [54]A. Ruina, Slip instability and state variable friction laws, J. Geophys. Res. Solid Earth 88, 10359 (1983).DOI
  55. [55]A. D. Berman, W. A. Ducker, and J. N. Israelachvili, Origin and characterization of different stick-slip friction mechanisms, Langmuir 12, 4559 (1996).DOI
  56. [56]Y. A. Kuznetsov, Elements of Applied Bifurcation Theory, 4th ed., Applied Mathematical Sciences, Vol. 112 (Springer, Cham, 2023).
  57. [57]C. T. C. Wall, Singular Points of Plane Curves, London Mathematical Society Student Texts, Vol. 63 (Cambridge University Press, Cambridge, 2004).DOI
  58. [58]G. A. Baker and P. Graves-Morris, Padé Approximants, 2nd ed., Encyclopedia of Mathematics and its Applications, Vol. 59 (Cambridge University Press, Cambridge, 1996).
  59. [59]V. I. Buslaev, Convergence of multipoint padé approximants of piecewise analytic functions, Sbornik: Mathematics 204, 190 (2013).DOI
  60. [60]L. N. Trefethen, Approximation Theory and Approximation Practice, extended ed. (Society for Industrial and Applied Mathematics, Philadelphia, 2020).
  61. [61]S. Aghamiri and R. Sedaghati, Magnetoactive metamaterials: A state-of-the-art review, Adv. Eng. Mater. 27, e202501312 (2025).DOI
  62. [62]A. Concha, D. Aguayo, and P. Mellado, Designing hysteresis with dipolar chains, Phys. Rev. Lett. 120, 157202 (2018).DOI
  63. [63]H. Chiriac and N. Lupu, eds., Magnetic Sensors and Actuators in Medicine: Materials, Devices, and Applications, Woodhead Publishing Series in Electronic and Optical Materials (Woodhead Publishing, 2023).DOI
  64. [64]A. Shukla, S. Qian, and S. Rakheja, Spintronic devices and applications using noncollinear chiral antiferromagnets, Nanoscale Horiz. 10, 484 (2025).arxiv.org/abs/2402.01977
  65. [65]A. H. Lone, X. Zou, K. K. Mishra, V. Singaravelu, R. Sbiaa, H. Fariborz, and G. Setti, Multilayer ferromagnetic spintronic devices for neuromorphic computing applications, Nanoscale 16, 12431 (2024).DOI
  66. [66]V. Popov and J. Gray, Prandtl-Tomlinson model: History and applications in friction, plasticity, and nanotechnologies, Z. Angew. Math. Mech. 92, 683 (2012).DOI
  67. [67]A. I. Aptekarev and M. L. Yattselev, Padé approximants for functions with branch points—strong asymptotics of Nuttall–Stahl polynomials, Acta Mathematica 215, 217 (2015).

Paper details

vlnc:W_cs2begb8
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents