betaFeedback

WorksPhysics and Astronomy

Elastic stability of Ga2_2O3_3: Addressing the ββ to αα phase transition from first principles

Abstract

Elastic and structural properties of ββ-Ga2_2O3_3 and αα-Ga2_2O3_3 are investigated from first principles. The full elastic tensors and elastic moduli of both phases at 00 K are computed in the framework of semi-local density-functional theory. We determine mechanical instabilities of ββ-Ga2_2O3_3 by evaluating the full stiffness tensor under load for a range of hydrostatic pressure values. While a phase transition from the ββ to αα phase is found to be energetically favored at 2.62.6 GPa, we show that the ββ phase is only mechanically unstable for much higher pressures (>30>30 GPa), which agrees well with experimental results. Our employed approach is based on the Born stability criterion, is independent of crystal symmetry, and thus can be readily applied to different materials.

Introduction

The wide-gap transparent conducting oxide gallium oxide, Ga2_2O3_3, has gained a lot of interest in recent years as a potential candidate for a number of applications. Its tunable electrical and optical properties make it a promising material for gas sensors [1, 2, 3, 4, 5], field-effect transistors [6], and photodetectors [7, 8, 9, 10]. The material exhibits polymorphism, i.e., depending on the experimental conditions, it can adopt one out of at least five different known structures (α\alpha, β\beta, γ\gamma, δ\delta, and ϵ\epsilon) [11]. The thermodynamically stable phase at ambient conditions is β\beta-Ga2_2O3_3. It crystallizes in a base-centered monoclinic structure (space-group C2/mm) and consists of both tetrahedrally and octahedrally coordinated gallium atoms. The metastable high-density α\alpha phase exhibits a rhombohedral corundum structure (space-group R3ˉcR\bar{3}c) and is solely made up of octahedrally coordinated gallium. The unit cells of α\alpha- and β\beta-Ga2_2O3_3 are illustrated in Figure 1. Remeika and Marezio first reported a phase transition of the β\beta phase to the α\alpha phase at 4.4 GPa and 1000 K [12]. The transformation was found to be irreversible after quenching the sample to room temperature. Since then, the phase transition has been the subject of several studies at both high and room temperatures. Studying nanoparticles of β\beta-Ga2_2O3_3 embedded in an amorphous silica-based host matrix by synchrotron-radiation-based x-ray diffraction [13], Lipinska-Kalita and coworkers reported a phase transition that sets in at about 6 GPa and is not completed at 15 GPa. It is, however, not clear whether the phase transition is affected by the host matrix or intrinsic to the nanoparticles [13]. In a follow-up study conducted on bulk β\beta-Ga2_2O3_3 at pressures up to 70 GPa, they reported an onset of 7.9 GPa (3 GPa) and the completion of the transition at 40 GPa (30 GPa) with (without) nitrogen as a pressure-transmitting medium [14]. Wang and coworkers subsequently subjected freestanding β\beta-Ga2_2O3_3 nanocrystals to pressures up to 64.9 GPa at room temperature and reported a transition onset between 13.6 and 16.4 GPa and a completed transition at 39.2 GPa [15]. A phase transition was also observed in β\beta-Ga2_2O3_3 microparticles, taking place between 20 and 39 GPa, where only a highly disordered structure comparable to α\alpha-Ga2_2O3_3 remained [16].

Conventional and primitive unit cells of beta- and alpha-Ga2O3

Figure 1. Top: Conventional (left) and primitive (right) unit cell of β\beta-Ga2_2O3_3. Bottom: Same for α\alpha-Ga2_2O3_3. Gallium atoms are in green, oxygen atoms in red.

Also in recently reported shock-recovery experiments, a phase transition occurred (between 11 and 16 GPa) [17]. Similar transition pressures have been published in computational studies. The reported values range from 2 to 17 GPa [18, 19, 20, 21]. From the review above, it is apparent that while there is an extensive discussion in the literature about the phase transition between the two polymorphs, it is far from being settled at which pressure the transition takes place. In particular, the interplay between the transition pressure ptp_t, that is obtained by thermodynamical considerations, and the critical pressure pcp_c, that is ruled by a mechanical instability, has not been thoroughly discussed. This is the aim of our work, where we illustrate that only considering both allows for understanding the diversity of experimental results. We investigate the β\beta to α\alpha phase transition by calculating the elastic properties

of both α\alpha- and β\beta-Ga2_2O3_3, and examining, in particular, their variation under hydrostatic pressure. The critical pressure is obtained by applying the generalized Born stability criterion to the elastic constants under load.

Theoretical background

Application of strain leads to a deformation of the crystal due to the resulting stress. In the linear elastic regime, strain and stress can be represented by symmetric second-rank tensors and are related by Hooke’s law [22, 23, 24]

σij=Cijkl ϵkl,(1)\sigma_{ij}=C_{ijkl}\,\epsilon_{kl}, \tag*{(1)}

where CijklC_{ijkl} represents the stiffness tensor, ϵkl\epsilon_{kl} the physical strain tensor, and σij\sigma_{ij} the stress tensor. For conciseness, we employ Einstein’s notation for summations throughout this work. When dealing with symmetric tensors, it is convenient to use the Voigt notation, where a pair of Cartesian indices ijij can be written as a single index γ\gamma, according to

ij112233231312γ123456\begin{array}{c|cccccc} ij & 11 & 22 & 33 & 23 & 13 & 12 \\ \gamma& 1 & 2 & 3 & 4 & 5 & 6 \end{array}

In the following, tensors expressed in the Voigt notation are represented by six-dimensional vectors using a bold font. In order to calculate the stiffness tensor, one can expand the total crystal energy per unit cell, E(ϵ)E(\boldsymbol{\epsilon}), in terms of the strain [25]

E(ϵ)V0=E0V0+σ0⋅ϵ⏟=0+12ϵT⋅C⋅ϵ+…,(2)\frac{E(\boldsymbol{\epsilon})}{V_0}=\frac{E_0}{V_0}+\underbrace{\boldsymbol{\sigma}_0\cdot\boldsymbol{\epsilon}}_{=0}+\frac{1}{2}\boldsymbol{\epsilon}^{\mathsf{T}}\cdot\mathbf{C}\cdot\boldsymbol{\epsilon}+\ldots, \tag*{(2)}

where E0E_0 and V0V_0 refer to the equilibrium energy and volume per unit cell and σ0\boldsymbol{\sigma}_0 to the equilibrium stress tensor. The stiffness tensor is defined as

Cγλ=1V0∂2E(ϵ)∂ϵγ ∂ϵλ∣ϵ=0.(3)C_{\gamma\lambda}=\left.\frac{1}{V_0}\frac{\partial^2 E(\boldsymbol{\epsilon})}{\partial\epsilon_\gamma\,\partial\epsilon_\lambda}\right|_{\boldsymbol{\epsilon}=0}. \tag*{(3)}

This definition is only valid for the description of an initially unstressed crystal. For a crystal under arbitrary constant stress, it is necessary to introduce a stiffness tensor under load, BijklB_{ijkl}. As hydrostatic pressure does not reduce the crystal symmetry, it has the same symmetry as the stiffness tensor C\mathbf{C}, and can be represented in Voigt notation, henceforth denoted as B\mathbf{B}. The appropriate thermodynamical potential to describe the stressed system is the enthalpy H=E+p0VH=E+p_0V, where p0p_0 represents the initial constant pressure. The stiffness tensor under external hydrostatic pressure can then be calculated as

Bγλ=1V~0∂2H(ϵ)∂ϵγ ∂ϵλ∣ϵ=0,(4)B_{\gamma\lambda}=\left.\frac{1}{\widetilde{V}_0}\frac{\partial^2 H(\boldsymbol{\epsilon})}{\partial\epsilon_\gamma\,\partial\epsilon_\lambda}\right|_{\boldsymbol{\epsilon}=0}, \tag*{(4)}

where V~0\widetilde{V}_0 is the volume per unit cell for the initially stressed structure. To derive the relation between CγλC_{\gamma\lambda} and BγλB_{\gamma\lambda}, we have to transform back to Cartesian indices and start with arbitrary constant external stress σij\sigma_{ij}. BijklB_{ijkl} can then be expressed as [23, 26, 27]:

Bijkl=C~ijkl+12(δikσjl+δjkσil+δilσjk+δjlσik−2δklσij).(5)B_{ijkl}=\widetilde{C}_{ijkl}+\frac{1}{2}\left(\delta_{ik}\sigma_{jl}+\delta_{jk}\sigma_{il}+\delta_{il}\sigma_{jk}+\delta_{jl}\sigma_{ik}-2\delta_{kl}\sigma_{ij}\right). \tag*{(5)}

Note that now one has to evaluate the stiffness tensor C~ijkl\widetilde{C}_{ijkl} for the initially stressed crystal configuration at volume V~0\widetilde{V}_0. In this work, we consider the β\beta phase under external hydrostatic pressure, σij=−Pδij\sigma_{ij}=-P\delta_{ij} (P>0P>0 for tension). Then, the stiffness tensor under load can be written as

Bijkl=C~ijkl−P(δikδjl+δjkδil−δklδij).(6)B_{ijkl}=\widetilde{C}_{ijkl}-P(\delta_{ik}\delta_{jl}+\delta_{jk}\delta_{il}-\delta_{kl}\delta_{ij}). \tag*{(6)}

Both tensors have the same symmetry, and we can thus go back to Voigt notation. It follows that

Bγλ=C~γλ+(−PPP000P−PP000PP−P000000−P000000−P000000−P).(7)B_{\gamma\lambda}=\widetilde{C}_{\gamma\lambda}+ \begin{pmatrix} -P & P & P & 0 & 0 & 0\\ P & -P & P & 0 & 0 & 0\\ P & P & -P & 0 & 0 & 0\\ 0 & 0 & 0 & -P & 0 & 0\\ 0 & 0 & 0 & 0 & -P & 0\\ 0 & 0 & 0 & 0 & 0 & -P \end{pmatrix}. \tag*{(7)}

The Born stability criterion [28] enables us to determine the elastic stability of an unstressed crystal: A crystal with arbitrary symmetry is stable if the stiffness tensor C\mathbf{C} is positive definite [28, 29]. This condition is equivalent to C\mathbf{C} being a symmetric tensor having only positive eigenvalues that can be calculated with standard algebraic techniques. While the Born stability criterion is formulated for an unstressed crystal, they can also be generalized to the case of constant external hydrostatic load; in this case, the stiffness tensor under load, B\mathbf{B}, has to be positive definite [29].

Computational details

All calculations are performed in the framework of density-functional theory using the all-electron full-potential code exciting [30], which applies the linearized augmented planewave plus local orbital method. Exchange-correlation effects are treated within the generalized gradient approximation, specifically the functional PBEsol [31] which shows high accuracy in determining elastic properties for solids [32]. Total energies are calculated using an 8×8×88\times8\times8 (6×6×66\times6\times6) k-grid and a planewave cut-off RMTmin⁡Gmax⁡=9.0R_{\mathrm{MT}}^{\min}G_{\max}=9.0 for α\alpha-Ga2_2O3_3 (β\beta-Ga2_2O3_3). We employ muffin-tin radii of RMTGa=1.65a0R_{\mathrm{MT}}^{\mathrm{Ga}}=1.65a_0 (1.75a01.75a_0) and RMTO=1.45a0R_{\mathrm{MT}}^{\mathrm{O}}=1.45a_0 for gallium and oxygen, respectively, in α\alpha-Ga2_2O3_3 (β\beta-Ga2_2O3_3), where a0a_0 is the Bohr radius. The internal atomic positions are relaxed until the atomic forces are smaller than 0.2 mHa a0−10.2\,\mathrm{mHa}\,a_0^{-1}. These parameters ensure a numerical precision of 10−210^{-2} a03a_0^3 for the equilibrium volume V0V_0, 10−210^{-2} GPa for the bulk modulus B0B_0, and 10−310^{-3} for its pressure derivative B0′B'_0.

α\alpha-Ga2_2O3_3aaccB0B_0B0′B'_0
Present work5.0113.472184.5
Theory [19] (LDA)4.9513.322443.8
Theory [20] (AM05)5.0013.452154.5
Experiment [14]4.9813.432524
β\beta-Ga2_2O3_3aabbccβ\betaB0B_0B0′B'_0
Present work12.303.055.82103.71693.9
Theory [35] (LDA)12.213.035.75103.62193.2
Theory [20] (AM05)12.303.055.81103.71653.8
Experiment [14]12.233.045.80103.81844

Table 1. Calculated lattice parameters, aa, bb, and cc, (in Å), monoclinic angle β\beta (in °), bulk moduli, B0B_0 (in GPa), and their pressure derivatives, B0′B'_0, of α\alpha-Ga2_2O3_3 and β\beta-Ga2_2O3_3 at zero pressure.

In order to calculate the full stiffness tensor at zero pressure, a total of 13 (6) different deformation types are applied to β\beta-Ga2_2O3_3 (α\alpha-Ga2_2O3_3). The reader is referred to Ref. 25 for a full list of the employed deformation types. For each of them, several equally spaced strain points around the origin are created for physical strain up to 4.5 %. For every deformed structure, the internal atomic positions are relaxed until the atomic forces are smaller than 0.2 mHa a0−1a_0^{-1}. The preparation of the deformed structures and evaluation of second-order derivatives shown in Eqs. (3) and (4), are performed using the ElaStic tool [25]. We create eight deformed β\beta-Ga2_2O3_3 structures to analyze the variation of the elastic constants under strain. The corresponding pressure values are extracted from the energy-vs-volume fit and range from −10-10 to 35 GPa.

All input and output files are available at the NOMAD Repository [33, 34] with the following DOI https://dx.doi.org/10.17172/NOMAD/2021.12.02-1.

Results and Discussion

Structural properties

The lattice parameters, bulk moduli, B0B_0, and their pressure derivatives, B0′B'_0, are obtained as fitting parameters from the Birch-Murnaghan equation of state (EOS). The results for the α\alpha and β\beta phase are given in Table I. All parameters, obtained at zero temperature and pressure, show excellent agreement with previously published theoretical and experimental work. The bulk modulus of the α\alpha phase is larger than that of the β\beta phase by about 50 GPa. Considering that α\alpha-Ga2_2O3_3 is the more compressed phase and the bulk modulus is a measure of resistance against uniform compression, such a result is

expected. Compared to experiment, it is underestimated by about 10 - 20 %, which is within the typical accuracy of a semi-local DFT calculation of elastic properties [36]. Note that B0B_0 here is obtained from a fit and not explicitly calculated as a linear combination of second-order elastic constants (see Section IV C).

Phase transition

Using the energy-vs-volume relation at high pressures, we can further analyze the phase transition from the β\beta to the α\alpha phase. The Gibbs free energy, G=U+pV−TSG = U + pV - TS, dictates the structural stability at a given temperature and pressure. The complete calculation of this quantity would require the full phonon spectrum. In this work, we focus on the enthalpy H=E+pVH = E + pV, i.e., the low-temperature case, where the internal energy, U≈EU \approx E, is determined by the Birch-Murnaghan EOS. Such an approach is justified for the pressure-induced properties of hard materials [37]. For a given pressure, the crystal phase with the lowest enthalpy is the most stable one while a crossing point between two phases indicates a first-order phase transition. This transition pressure is purely obtained by thermodynamical considerations and will henceforth be denoted as ptp_t.

The calculated Birch-Murnaghan EOS for both phases are given in Figure 2. We obtain a transition pressure of pt=2.6p_t = 2.6 GPa. This value can be compared with the experimental transition onset, owing to the fact that a new phase is thermodynamically favored once this pressure is reached. We therefore consider ptp_t as the lower bound for a phase transition setting in. As illustrated in the Introduction, the discrepancy between published transition pressures is quite high as the experimental conditions play a vital role in determining the transition onset, where temperature, pressure medium, sample size and type can have a dramatic impact. Consequently, reported experimental values range from 3 to 20 GPa [13, 14, 16, 17, 38]. However, also theoretical values range from 2 to 17 GPa [18, 19, 20, 21]. Here, differences can be assigned to the usage of different exchange-correlation functionals as well as as the treatment of the Ga 3d3d states (as core or valence states) in pseudopotential approaches.

Figure 2. Equations of state for the α\alpha and β\beta phase of Ga2_2O3_3. Energies are relative to values of β\beta-Ga2_2O3_3. The dots and crosses are the computed data points for β\beta-Ga2_2O3_3 and α\alpha-Ga2_2O3_3, respectively. The solid and dashed lines represent the corresponding Birch-Murnaghan (B-M) fits. The dotted line represents the common tangent of the EOS for both phases. The transition pressure ptp_t is determined by the common gradient.

Elastic stability at different pressures

Ambient pressure

Depending on the crystal symmetry, the stiffness tensor can have up to 21 independent components. In the case of the monoclinic β\beta phase (rhombohedral α\alpha phase), this number reduces to 13 (6). The calculated second-order elastic constants at zero pressure for both phases are summarized in Tables II and III, showing excellent agreement with other theoretical results. To compare our results to those of Ref. 20, we employ the same lattice representation. For β\beta-Ga2_2O3_3 it is chosen such that the yy axis is parallel to bb, the xx axis is parallel to aa, and the cc axis lies in the xx-zz plane (see Figure 1).

We also calculate the elastic moduli as linear combinations of second-order elastic constants and compare the bulk modulus with the one obtained from the Birch-Murnaghan EOS, B0B_0, shown in Table IV. The values for the bulk moduli from both methods show excellent agreement, further validating the precision of our calculations. All elastic moduli of the β\beta phase are smaller than those of the α\alpha phase. This is expected, since the latter is obtained from compressing β\beta-Ga2_2O3_3 under hydrostatic strain, and a higher density leads to more resistance against strain and, therefore, larger elastic moduli.

The second-order elastic constants of both phases exhibit pronounced anisotropy due to crystal symmetry. The diagonal terms, C11C_{11}, C22C_{22}, and C33C_{33}, have the highest values in excess of 200 GPa. As large diagonal components mean a high degree of hardness against strain in the respective directions, both phases strongly resist deformations along the main axes. This situation is reversed for the shear-strain components (indices 4 to 6). The calculated values are much smaller than the axial strain components (indices 1 to 3). They are as low as C25=11.4C_{25} = 11.4 GPa and C35=7.2C_{35} = 7.2 GPa for the β\beta phase, and C14=−16.5C_{14} = -16.5 GPa for the α\alpha phase. These findings suggest that both phases are susceptible to shear strains.

The elastic moduli further validate this assumption, as the shear modulus for both phases is smaller than the bulk and Young modulus, i.e., G<B<EG < B < E.

Importantly, for both the β\beta and α\alpha phase, all eigenvalues of the stiffness tensors are positive. Thus, according to the Born stability criterion, they are elastically stable at equilibrium at 0 K. This coincides with previously published results [11], where β\beta-Ga2_2O3_3 was identified as the thermodynamically stable phase and α\alpha-Ga2_2O3_3 as a metastable phase.

Variation under hydrostatic pressure

We now explore how the second-order elastic constants of the β\beta phase react to hydrostatic pressure. To this extent, we perform calculations on configurations that are obtained by isotropically straining the crystal, by applying the transformation

R(ϵ)=(1+ϵ)RP=0,R(\epsilon) = (1+\epsilon)R_{P=0},

where ϵ\epsilon is a constant value, and calculate their stiffness tensors under load, BB (Eq. (4)). The chosen values for ϵ\epsilon correspond to pressure values between −10-10 GPa and 35 GPa. The results are summarized in Table V. Overall, the elastic constants increase in value with increasing pressure, reflecting that the denser structures are more resistant to strain. The eigenvalues of the stiffness tensor are positive up to 20 GPa, indicating mechanical stability of the β\beta phase under strain. The structure at 35 GPa is the only unstable one. We conclude that the critical pressure pcp_c must thus be much higher than the thermodynamic transition pressure of 2.6 GPa obtained in Section IV B. As such, pcp_c can be seen as the upper bound of the phase transition pressure.

PPV/V0V/V_0B11B_{11}B12B_{12}B13B_{13}B15B_{15}B22B_{22}B23B_{23}B25B_{25}B33B_{33}B35B_{35}B44B_{44}B46B_{46}B55B_{55}B66B_{66}
-10.01.07175.990.684.9-15.0272.337.813.8277.35.325.87.666.787.4
-5.01.03201.5103.7106.0-15.2302.458.212.9303.06.640.913.266.790.0
0.01.00220.5116.4128.3-17.3329.579.111.4326.87.250.018.166.191.5
0.50.99222.2117.2131.7-18.4332.279.610.3328.87.250.918.265.891.7
2.50.99229.3122.6140.0-18.8343.487.710.8336.37.753.619.465.492.1
4.90.97236.3129.9149.7-19.0357.198.511.5343.98.857.120.264.992.5
10.00.95249.8143.7174.5-23.9382.5118.48.6361.79.261.022.562.492.7
19.60.91265.2170.2222.3-33.7429.7160.34.1392.210.468.324.256.591.4
35.00.86279.5212.5307.0-52.9502.4229.5-3.0433.711.578.922.243.784.6

Table V. Second-order elastic constants of β\beta-Ga2_2O3_3 as a function of hydrostatic pressure PP. Pressure and elastic constants are given in units of GPa. V0V_0 is the volume of the unstressed crystal.

In order to estimate pcp_c, we further analyze our results using the Born stability criterion. As an alternative to calculating the eigenvalues of the stiffness tensor, we aim at finding a closed mathematical expression for its conditions. [29, 40, 41] This can be done, for example, by making use of the leading principal minors of the stiffness tensor [29]. The onset pressure of mechanical instabilities can be estimated by evaluating these expressions over a certain pressure range. For cubic systems under hydrostatic stress, the second-order constants BγδB_{\gamma\delta} only differ from the stiffness constants CγδC_{\gamma\delta} by a linear term in PP [29, 40, 41]. Such linear equations are not attainable for a monoclinic system. As an alternative approach, we evaluate the equation

det⁡∣B∣=0,(8)\det|B| = 0, \tag*{(8)}

to explore when the system becomes unstable [41]. This enables us to estimate the critical pressure solely from the stiffness tensor under load. In the case of β\beta-Ga2_2O3_3, Eq. (8) is a polynomial equation of 6th degree in the pressure which can be expressed in the following form:

β\beta-Ga2_2O3_3C11C_{11}C12C_{12}C13C_{13}C15C_{15}C22C_{22}C23C_{23}C25C_{25}C33C_{33}C35C_{35}C44C_{44}C46C_{46}C55C_{55}C66C_{66}
Present work220.5116.4128.3-17.3329.579.111.4326.87.250.018.166.191.5
Theory [20]223.1116.5125.3-17.4333.275.012.2330.07.350.317.468.694.2
Expt. [39]242.8128.0160.0-1.6343.870.90.4347.41.047.85.688.6104.0

Table 2. Calculated second-order elastic constants at ambient pressure for the β\beta phase of Ga2_2O3_3, given in units of GPa, compared to previously published results.

α\alpha-Ga2_2O3_3C11C_{11}C12C_{12}C13C_{13}C14C_{14}C33C_{33}C44C_{44}
Present work380.3174.5128.5-16.6342.980.1
Theory [20]381.5173.6126.0-17.3345.879.7

Table 3. Calculated second-order elastic constants at ambient pressure for the α\alpha phase of Ga2_2O3_3, given in units of GPa, compared to previously published theoretical results.

β\beta-Ga2_2O3_3BBGGEEν\nu
Voigt169.478.4203.70.30
Reuss166.766.2175.30.32
Hill168.072.3189.60.31
Birch-Murnaghan EOS168.8
α\alpha-Ga2_2O3_3BBGGEEν\nu
Voigt218.597.4254.50.31
Reuss216.492.2242.00.31
Hill217.494.8248.20.31
B-M EOS218.4

Table 4. Calculated elastic moduli (in units of GPa) given as Voigt’s, Reuss’s, and Hill’s average. For the bulk modulus we also show the value obtained from the Birch-Murnaghan EOS in Figure 2.

(P2−P(C44+C66)+C44C66−C462)⋅P4(P)=0(9)\left(P^2 - P\left(C_{44}+C_{66}\right)+C_{44}C_{66}-C_{46}^2\right)\cdot P_4(P)=0 \tag*{(9)}

The first term, denoted as M(P)M(P), includes only shear components of the stiffness tensor and can be identified as a shear instability criterion. The second term, P4(P)P_4(P), is a polynomial of order four in PP (denoted as N(P)N(P)) which is provided in the Appendix. The structure is mechanically unstable if one term equals zero. We now estimate the critical pressure(s) by interpolating our results for M(P)M(P) and N(P)N(P). By doing so, we can identify from the zero of M(P)M(P) whether the transition is solely occurring due to shear strain. Our interpolation of both expressions is to be used with caution for very high (>50> 50 GPa) and very low pressures (<−20< -20 GPa). We want to emphasize that the aim is to estimate the critical pressure in the experimentally relevant range of up to 50 GPa.

The results are illustrated in Figure 3. We obtain two critical pressures of pc=−21.4p_c=-21.4 GPa and pc=32.4p_c=32.4 GPa. This indicates that β\beta-Ga2_2O3_3 is mechanically stable in the range of −21.4-21.4 GPa <P<< P < 32.4 GPa. The upper bound agrees well with the observations from several experiments as the phase transition is fully completed above 30 to 40 GPa, i.e., only α\alpha-Ga2_2O3_3 is remaining in the sample [13, 14, 15]. Only in Ref. 21 a theoretical critical pressure below 30 GPa was reported. Their transition pressure of 19.4 GPa is, however, drastically higher than our calculated value of 2.6 GPa. Note that our results are obtained at 0 K. First-principles calculations show that the elastic constants for β\beta-Ga2_2O3_3 are decreasing with temperature; however, the effect is small at room temperature [42]. Therefore, we do not expect a significant change of the critical pressure at ambient temperature. The lower bound would indicate the emergence of another metastable phase below −21.4-21.4 GPa which is due to an instability of the pure shear criterion, M(P)=0M(P)=0. To our knowledge, no studies have been performed with negative pressure for any of the sesquioxides. In principle, it is possible to reach negative pressure values on the order of a couple of GPa in solids [43].

Figure 3. Instability criteria M(P)M(P) and N(P)N(P), as defined in Eq. (9), as a function of hydrostatic pressure PP. The red dots represent the calculated data points for the strained β\beta-Ga2_2O3_3 structures. The solid lines indicate polynomial fits of order 2 and 4 to the data points for M(P)M(P) and N(P)N(P), respectively.

While most studies report the phase transition with quasihydrostatic pressure mediums, the phase transition also occurs under non-hydrostatic conditions [14]. This, in turn, indicates that an additional mechanical instability may arise from non-uniform stress, which would reduce the symmetry of the stiffness tensor under load, BB. We have so far not considered this in our analysis.

Summary

We have investigated the structural and elastic properties of Ga2_2O3_3 in the rhombohedral α\alpha and monoclinic β\beta phase from first principles. Based on our results, a phase transition from β\beta- to α\alpha-Ga2_2O3_3 is energetically favored at pt=2.6p_t=2.6 GPa. The calculated full stiffness tensors, CC, of both phases at ambient pressure show pronounced anisotropy as well as susceptibility to shear

strain, indicated by the small shear moduli of GVβ=78G_V^\beta=78 GPa and GVα=97G_V^\alpha=97 GPa, respectively. Investigating the variation of the stiffness tensor under hydrostatic pressure, we observe that, according to the Born stability criterion, β\beta-Ga2_2O3_3 is becoming mechanically unstable at a critical pressure of pc=32.4p_c=32.4 GPa. The transition pressure ptp_t can be seen as a lower bound for the phase transition and agrees well with the transition onset in previously reported experimental and theoretical results [14, 16, 18, 20]. Only considering this pressure value obtained from thermodynamics is, however, not sufficient to explain the full range of experimentally observed transition pressures. While a phase transition is energetically favored above ptp_t, there are additional kinetic barriers that must be overcome. Only when the β\beta phase is mechanically unstable, i.e. at pc=32.4p_c=32.4 GPa, we expect the phase transition to be completed. This agrees well with experimental observations showing completion of the transition only above 30 GPa [14, 15, 16]. In addition, we find a critical pressure of −41-41 GPa. Phonon calculations in this pressure range could provide insight into the emergence of a novel metastable phase for negative pressures. Experiments with negative pressures, at values below a few GPa have so far not been conducted but could point to novel discoveries in the future.

Our first-principles approach, being successfully demonstrated here for the wide-gap oxide Ga2_2O3_3, though requiring hydrostatic pressure, is independent of crystal symmetry, and thus could be applied to other materials. For example, a similar analysis could thus be conducted for other sesquioxides to estimate stability windows and the possible emergence of novel metastable phases.

Acknowledgements

This work was performed in the framework of GraFOx, a Leibniz-Science Campus partially funded by the Leibniz Association. The authors acknowledge the North-German Supercomputing Alliance (HLRN) for providing HPC resources that have contributed to the research results reported in this paper. The authors would like to thank Maria Troppenz for critically reading the manuscript.

Appendix

The term N(P)N(P) in Eq. (9) is a polynomial of order 4 in PP and can be expressed in terms of the elastic constants CγλC_{\gamma\lambda} as follows:

N(P)=b4P4+b3P3+b2P2+b1P+b0,N(P) = b_4 P^4 + b_3 P^3 + b_2 P^2 + b_1 P + b_0,

with

b4=−4,b3=−4C12−4C13−4C23+4C55,b2=C11C22+2C11C23+C11C33−C122−2C12C13−2C12C23+2C12C33+4C12C55−C132+2C13C22−2C13C23+4C13C55−4C15C25−4C15C35+C22C33−C232+4C23C55−4C25C35,b1=−C11C22C33−C11C22C55+C11C232−2C11C23C55+C11C252+2C11C25C35−C11C33C55+C11C352+C122C33+C122C55−2C12C13C23+2C12C13C55−2C12C15C25−2C12C15C35+2C12C23C55−2C12C25C35−2C12C33C55+2C12C352+C132C22+C132C55−2C13C15C25−2C13C15C35−2C13C22C55+2C13C23C55+2C13C252−2C13C25C35+C152C22+2C15C23C35+2C15C22C35−2C15C23C25−2C15C23C35+2C15C25C33−C22C33C55+C22C352+C232C55−2C23C25C35+C252C33,b0=C11C22C33C55−C11C22C352−C11C232C55+2C11C23C25C35−C11C252C33−C122C33C55+C122C352+2C12C13C23C55−2C12C13C25C35−2C12C15C23C35+2C12C15C25C33−C132C22C55+C132C252+2C13C15C22C35−2C13C15C23C25−C152C22C33+C152C232.\begin{aligned} b_4 &= -4,\\ b_3 &= -4C_{12} - 4C_{13} - 4C_{23} + 4C_{55},\\ b_2 &= C_{11}C_{22} + 2C_{11}C_{23} + C_{11}C_{33} - C_{12}^{2} - 2C_{12}C_{13} - 2C_{12}C_{23} + 2C_{12}C_{33} + 4C_{12}C_{55} - C_{13}^{2} + 2C_{13}C_{22}\\ &\quad- 2C_{13}C_{23} + 4C_{13}C_{55} - 4C_{15}C_{25} - 4C_{15}C_{35} + C_{22}C_{33} - C_{23}^{2} + 4C_{23}C_{55} - 4C_{25}C_{35},\\ b_1 &= -C_{11}C_{22}C_{33} - C_{11}C_{22}C_{55} + C_{11}C_{23}^{2} - 2C_{11}C_{23}C_{55} + C_{11}C_{25}^{2} + 2C_{11}C_{25}C_{35} - C_{11}C_{33}C_{55}\\ &\quad+ C_{11}C_{35}^{2} + C_{12}^{2}C_{33} + C_{12}^{2}C_{55} - 2C_{12}C_{13}C_{23} + 2C_{12}C_{13}C_{55} - 2C_{12}C_{15}C_{25} - 2C_{12}C_{15}C_{35}\\ &\quad+ 2C_{12}C_{23}C_{55} - 2C_{12}C_{25}C_{35} - 2C_{12}C_{33}C_{55} + 2C_{12}C_{35}^{2} + C_{13}^{2}C_{22} + C_{13}^{2}C_{55} - 2C_{13}C_{15}C_{25}\\ &\quad- 2C_{13}C_{15}C_{35} - 2C_{13}C_{22}C_{55} + 2C_{13}C_{23}C_{55} + 2C_{13}C_{25}^{2} - 2C_{13}C_{25}C_{35} + C_{15}^{2}C_{22} + 2C_{15}C_{23}C_{35}\\ &\quad+ 2C_{15}C_{22}C_{35} - 2C_{15}C_{23}C_{25} - 2C_{15}C_{23}C_{35} + 2C_{15}C_{25}C_{33} - C_{22}C_{33}C_{55}\\ &\quad+ C_{22}C_{35}^{2} + C_{23}^{2}C_{55} - 2C_{23}C_{25}C_{35} + C_{25}^{2}C_{33},\\ b_0 &= C_{11}C_{22}C_{33}C_{55} - C_{11}C_{22}C_{35}^{2} - C_{11}C_{23}^{2}C_{55} + 2C_{11}C_{23}C_{25}C_{35} - C_{11}C_{25}^{2}C_{33}\\ &\quad- C_{12}^{2}C_{33}C_{55} + C_{12}^{2}C_{35}^{2} + 2C_{12}C_{13}C_{23}C_{55} - 2C_{12}C_{13}C_{25}C_{35} - 2C_{12}C_{15}C_{23}C_{35}\\ &\quad+ 2C_{12}C_{15}C_{25}C_{33} - C_{13}^{2}C_{22}C_{55} + C_{13}^{2}C_{25}^{2} + 2C_{13}C_{15}C_{22}C_{35} - 2C_{13}C_{15}C_{23}C_{25}\\ &\quad- C_{15}^{2}C_{22}C_{33} + C_{15}^{2}C_{23}^{2}. \end{aligned}

References

References

  1. [1]Y. Huang, S. Yue, Z. Wang, Q. Wang, C. Shi, Z. Xu, X. D. Bai, C. Tang, and C. Gu, Preparation and electrical properties of ultrafine Ga₂O₃ nanowires, The Journal of Physical Chemistry B 110, 796 (2006).
  2. [2]S. P. Arnold, S. M. Prokes, F. K. Perkins, and M. E. Zaghloul, Design and performance of a simple, room-temperature Ga₂O₃ nanowire gas sensor, Applied Physics Letters 95, 103102 (2009).DOI
  3. [3]N. D. Cuong, Y. W. Park, and S. G. Yoon, Microstructural and electrical properties of Ga₂O₃ nanowires grown at various temperatures by vapour-liquid-solid technique, Sensors and Actuators B: Chemical 140, 240 (2009).DOI
  4. [4]Z. Liu, T. Yamazaki, Y. Shen, T. Kikuta, N. Nakatani, and Y. Li, O₂ and CO sensing of Ga₂O₃ multiple nanowire gas sensors, Sensors and Actuators B: Chemical 129, 666 (2008).DOI
  5. [5]L. Mazeina, F. K. Perkins, V. M. Bermudez, S. P. Arnold, and S. M. Prokes, Functionalized Ga₂O₃ nanowires as active material in room temperature capacitance-based gas sensors, Langmuir 26, 13722 (2010).DOI
  6. [6]P.-C. Chang, Z. Fan, W.-Y. Tseng, A. Rajagopal, and J. G. Lu, β-Ga₂O₃ nanowires: Synthesis, characterization, and p-channel field-effect transistor, Applied Physics Letters 87, 222102 (2005).
  7. [7]P. Feng, J. Y. Zhang, Q. H. Li, and T. H. Wang, Individual β-Ga₂O₃ nanowires as solar-blind photodetectors, Applied Physics Letters 88, 153107 (2006).
  8. [8]L. Li, E. Auer, M. Liao, X. Fang, T. Zhai, U. K. Gaul, A. Lugstein, Y. Koide, Y. Bando, and D. Golberg, Deep-ultraviolet solar-blind photoconductivity of individual gallium oxide nanobelts, Nanoscale 3, 1120 (2011).DOI
  9. [9]Y. Kokubun, K. Miura, F. Endo, and S. Nakagomi, Sol-gel prepared β-Ga₂O₃ thin films for ultraviolet photodetectors, Applied Physics Letters 90, 031912 (2007).DOI
  10. [10]W. Y. Weng, T. J. Hsueh, S. J. Chang, G. J. Huang, and S. P. Chang, A solar-blind β-Ga₂O₃ nanowire photodetector, IEEE Photonics Technology Letters 22, 709 (2010).
  11. [11]B. Roy, V. G. Hill, and E. F. Osborn, Polymorphism of Ga₂O₃ and the system Ga₂O₃–H₂O, Proc. Cambridge Philos. Soc. 36, 160 (1940).
  12. [12]J. P. Remeika and M. Marezio, Growth of α-Ga₂O₃ single crystals at 44 kbars, Applied Physics Letters 8, 87 (1966).DOI
  13. [13]K. E. Lipinska-Kalita, B. Chen, M. B. Kruger, Y. Ohki, J. Murowchick, and E. P. Gogol, High-pressure x-ray diffraction studies of the nanostructured transparent vit-roceramic medium K₂O–SiO₂–Ga₂O₃, Phys. Rev. B 68, 035209 (2003).
  14. [14]K. E. Lipinska-Kalita, P. E. Kalita, O. A. Hemmers, and T. Hartmann, Equation of state of gallium oxide to 70 GPa: Comparison of quasihydrostatic and nonhydrostatic compression, Phys. Rev. B 77, 094123 (2008).
  15. [15]H. Wang, Y. He, W. Chen, Y. W. Zeng, K. Stahl, T. Kikegawa, and J. Z. Jiang, High-pressure behavior of β-Ga₂O₃ nanocrystals, Journal of Applied Physics 107, 033520 (2010).
  16. [16]D. Machon, P. F. McMillan, B. Xu, and J. Dong, High-pressure study of the β-to-α transition in Ga₂O₃, Phys. Rev. B 73, 094125 (2006).DOI
  17. [17]H. Kishimura and H. Matsumoto, Evaluation of the shock-induced phase transition in β-Ga₂O₃, Japanese Journal of Applied Physics 57, 125503 (2018).DOI
  18. [18]P. Kroll, Spinel-type gallium oxynitrides attainable at high pressure and high temperature, Phys. Rev. B 72, 144407 (2005).DOI
  19. [19]F. Litimein, D. Rached, R. Khenata, and H. Baltache, FPLAPW study of the structural, electronic, and optical properties of Ga₂O₃: Monoclinic and hexagonal phases, Journal of Alloys and Compounds 488, 148 (2009).DOI
  20. [20]J. Furthmüller and F. Bechstedt, Quasiparticle bands and spectra of Ga₂O₃ polymorphs, Phys. Rev. B 93, 115204 (2016).DOI
  21. [21]S. Luan, L. Dong, and R. Jia, Analysis of the structural, anisotropic elastic and electronic properties of β-Ga₂O₃ with various pressures, Journal of Crystal Growth 505, 74 (2019).DOI
  22. [22]S. Timoshenko, Theory of Elasticity (McGraw-Hill, 1951).
  23. [23]D. C. Wallace, Thermodynamics of Crystals (Wiley, 1972).DOI
  24. [24]L. D. Landau and E. M. Lifschitz, Theory of Elasticity (Elsevier, 1986).
  25. [25]R. Golesorkhtabar, P. Pavone, J. Spitaler, P. Puschnig, and C. Draxl, Elastic: A tool for calculating second-order elastic constants from first principles, Comp. Phys. Commun. 184, 1861 (2013).DOI
  26. [26]G. Grimvall, B. Magyar-Köpe, V. Ozolins, and K. A. Persson, Lattice instabilities in metallic elements, Rev. Mod. Phys. 84, 945 (2012).DOI
  27. [27]D. C. Wallace, Thermoelasticity of stressed materials and comparison of various elastic constants, Phys. Rev. 162, 776 (1967).DOI
  28. [28]M. Born, On the stability of crystal lattices. I, Math. Proc. Cambridge Philos. Soc. 36, 160 (1940).DOI
  29. [29]F. Mouhat and F.-X. Coudert, Necessary and sufficient elastic stability conditions in various crystal systems, Phys. Rev. B 90, 224104 (2014).DOI
  30. [30]A. Gulans, S. Kontur, K. Meisenbichler, D. Nabok, P. Pavone, S. Rigamonti, S. Sagmeister, U. Werner, and C. Draxl, exciting: a full-potential all-electron package implementing density-functional theory and many-body perturbation theory, J.Phys.: Condens. Matter 26, 363202 (2014).DOI
  31. [31]J. P. Perdew, A. Ruzsinsky, G. I. Csonka, O. A. Vydrov, G. E. Scuseria, L. A. Constantin, X. Zhou, and K. Burke, Restoring the density-gradient expansion for exchange in solids and surfaces, Phys. Rev. Lett. 100, 136406 (2008).pubmed.ncbi.nlm.nih.gov/18517979
  32. [32]M. Râsander and M. A. Moram, On the accuracy of commonly used density functional approximations in determining the elastic constants of insulators and semiconductors, J. Chem. Phys. 143, 144104 (2015).DOI
  33. [33]C. Draxl and M. Scheffler, NOMAD: The FAIR concept for big-data-driven materials science, MRS Bulletin 43, 676 (2018).arxiv.org/abs/1805.05039
  34. [34]C. Draxl and M. Scheffler, The NOMAD laboratory: From data sharing to artificial intelligence, J. Phys. Mater. 2, 036001 (2019).DOI
  35. [35]H. He, R. Orlando, M. A. Blanco, R. Pandey, E. Amzallag, I. Baraille, and M. Rérat, First-principles study of the structural, electronic, and optical properties of Ga₂O₃ in its monoclinic and hexagonal phases, Phys. Rev. B 74, 195123 (2006).DOI
  36. [36]F. Giustino, Materials Modelling using Density Functional Theory: Properties and Predictions (Oxford University Press, 2014).
  37. [37]K. Karch, F. Bechstedt, P. Pavone, and D. Strauch, Pressure-dependent properties of SiC polytypes, Phys. Rev. B 53, 13400 (1996).pubmed.ncbi.nlm.nih.gov/9983085
  38. [38]M. Yan-Mei, C. Hai-Yong, Y. Kai-Feng, L. Min, C. Qi-Liang, L. Jing, and Z. Guang-Tian, High-pressure and high-temperature behaviour of gallium oxide, Chin. Phys. Lett. 25, 1603 (2008).
  39. [39]K. Adachi, H. Ogi, N. Takeuchi, N. Nakamura, H. Watanabe, T. Ito, and Y. Ozaki, Unusual elasticity of monoclinic β-Ga₂O₃, Journal of Applied Physics 124, 085102 (2018).DOI
  40. [40]J. Wang, S. Yip, S. R. Phillpot, and D. Wolf, Crystal instabilities at finite strain, Phys. Rev. Lett. 71, 4182 (1993).pubmed.ncbi.nlm.nih.gov/10055177
  41. [41]J. Wang, J. Li, S. Yip, S. Phillpot, and D. Wolf, Mechanical instabilities of homogeneous crystals, Phys. Rev. B 52, 12627 (1995).pubmed.ncbi.nlm.nih.gov/9980422
  42. [42]M. Santia, N. Tandon, and J. Albrecht, Effects of strain on the optical and thermodynamic properties of β-Ga₂O₃, Solid State Communications 297, 1 (2019).DOI
  43. [43]A. R. Imre, On the existence of negative pressure states, physica status solidi (b) 244, 893 (2007).DOI

Paper details

vlnc:W_cs9pccjf
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents