betaFeedback

WorksPhysics and Astronomy

Frustration-free control for quantum-state preparation: an exact first-passage theory

Abstract

Quantum circuits based on local measurements and feedback can autonomously prepare and stabilize entangled many-body states. In frustration-free control, the target manifold is specified by local constraints, whose violations are detected by measurement and removed by feedback. We develop an exact theory of this mechanism for the preparation of Dicke states of NqN_q qubits. Dicke states span the permutation-symmetric subspace, one per magnetization sector. Local singlet projectors define the constraints and detect departures from permutation symmetry. The resulting dynamics closes exactly on the span of the Nq(Nq−1)/2N_q(N_q-1)/2 singlet-pair projectors and is equivalent to a classical first-passage process: measurements move the pair endpoints, while feedback absorbs pairs on measured bonds. The closure reduces the exponentially large many-body Liouvillian to a generator of polynomial size. In one dimension we solve this process in closed form. Its slowest rate, 2[1−cos⁡(π/Nq)]2[1-\cos(π/N_q)] in units of the measurement rate, is an exact Liouvillian eigenvalue. For any scheme of this class, the relaxation time is bounded below by the inverse fraction of pair configurations on which feedback acts; local feedback reaches O(Nq)O(N_q) of O(Nq2)O(N_q^2) configurations, requiring a time at least linear in NqN_q. A second exact closure determines the final state reached from any initial condition. Extensions to modified transport, restricted feedback, and physical errors yield an exact transport-to-absorber crossover, geometric preparation laws, and a bound on the stationary leakage. An exact second-moment closure determines the ensemble fluctuations: the measurement noise is conserving, while feedback generates removal shot noise and pair correlations. Preparation, acceleration, robustness, and fluctuations are thus governed by one exactly solvable process: the transport and absorption of local constraint violations.

Introduction

Adaptive quantum circuits based on local measurements and feedback provide a route to the autonomous preparation and stabilization of entangled many-body states. By making the target state an attractor of the dynamics, the same protocol can prepare the target from arbitrary initial states within an invariant sector and restore it after perturbations [1, 2, 3, 4, 5]. The necessary capabilities include mid-circuit measurements, real-time feedforward, and repeated coupling to local ancillas, all of which are now available in trapped-ion, neutral-atom, and superconducting platforms [6, 7, 8, 9, 10, 11]. This raises two questions: how do locality and the structure of measurement and feedback determine the speed and accuracy of preparation, and how do the time and resource requirements compare with those of unitary schemes?

Frustration-free control (FFC) implements such attracting dynamics through local measurements and feedback [12, 13]. The target manifold is defined as the common kernel of local projectors {P^α}\{\hat{P}_{\alpha}\}, and a state with ⟨P^α⟩≠0\langle\hat{P}_{\alpha}\rangle\ne0 violates the local constraint α\alpha. Measuring these projectors detects such violations, and conditional feedback removes them. FFC is constructed so that the prescribed target manifold is absorbing and is reached with probability one. The same projectors define a frustration-free parent Hamiltonian H^=∑αP^α\hat{H} = \sum_{\alpha}\hat{P}_{\alpha}, which fixes the target manifold but not the dynamics by which it is reached. The preparation time depends on how measurement moves constraint violations, where feedback can remove them, and which quantities are conserved. Hence, it can be changed by the measurement or feedback geometry at fixed parent Hamiltonian.

We apply this framework to the preparation of Dicke states of NqN_q qubits. These states span the fully permutation-symmetric subspace, with a unique Dicke state in each fixed magnetization sector, and are central resources for quantum metrology and multipartite entanglement [14, 15, 16]. Since the singlet is the only antisymmetric state of two qubits, permutation symmetry can be imposed locally through the singlet projectors P^ℓm=(1−S^ℓm)/2\hat{P}_{\ell m} = (1-\hat{S}_{\ell m})/2, where S^ℓm\hat{S}_{\ell m} exchanges qubits ℓ\ell and mm. On any connected measurement graph, the common kernel of the measured projectors is the fully symmetric subspace. A measurement on a bond moves one endpoint of a pair projector along that bond, and feedback removes a pair whose two endpoints form a measured bond. Dicke-state preparation is therefore governed by the transport and absorption of constraint violations, Figure 1. This protocol was introduced in Ref. [12], which showed that the dynamics closes exactly on the operator space spanned by the pair projectors and derived the diffusive relaxation time τ∼Nq2\tau\sim N_q^2 of the nearest-neighbor chain together with its extension to long-range measurements; a complementary scaling picture for frustration-free targets was subsequently obtained from quasiparticle cooling [17].

Frustration-free control as a first-passage problem

Figure 1. Frustration-free control as a first-passage problem. (a) A constraint violation is a pair P^nm\hat{P}_{nm} with endpoints on sites nn and mm. A measurement on a bond moves the endpoint on that bond to its other site, at half the measurement rate; feedback removes a pair whose two endpoints form a measured bond, with strength λ\lambda. Transport and removal together form the closed generator K=M+AK=M+A, Eq. (39). (b) The same process viewed in the configuration space of pairs: measurements generate a random walk (blue), and the pairs whose endpoints form a feedback bond are the absorber F\mathcal{F} (red). The slowest decay rate is bounded by the fraction of the NpN_p configurations that are absorbing, Λ0≤λ∣F∣/Np\Lambda_0 \leq\lambda|\mathcal{F}|/N_p (Proposition 1). (c) Three ways of changing the process: faster endpoint motion by random partial-SWAP events (§ 2.2), a different absorber by restricting the feedback geometry (§ 3 A) or by extending the measurement range, which changes motion and absorber together (§ 3), and physical errors, which add a source of pairs and an additional decay (Sec. VII).

Here we further develop the operator closure picture of FFC: the central finding is that the approach to the target manifold, the final state, and the ensemble fluctuations can all be completely characterized through operator spaces of polynomial size that close under the dynamics. Closure here means that measurement and feedback map each operator space into itself. These closures are operator identities, so the resulting equations hold for arbitrary states. Three such structures determine the preparation process: (i) The Np=Nq(Nq−1)/2N_p = N_q(N_q - 1)/2 pair projectors {P^ℓm}\{\hat{P}_{\ell m}\} close linearly, and their expectation values obey a classical first-passage process that governs the approach to the Dicke manifold. (ii) The kernel of the adjoint Lindbladian is spanned by (Nq+1)2(N_q+1)^2 collective-spin polynomials, whose conserved expectation values fix the unique stationary state reached from each initial condition, including coherences between magnetization sectors. (iii) We further establish the closure on the operator space containing products of pair projectors, which determines the ensemble covariance and the noise generated by measurement and feedback. The three spaces have dimensions O(Nq2)O(N_q^2), O(Nq2)O(N_q^2), and O(Nq4)O(N_q^4), respectively, replacing the exponentially large many-body problem with linear equations of polynomial size, and define the fluctuating absorbing hydrodynamics of constraint violations.

This fully characterizes the preparation dynamics in terms of two paradigmatic regimes of absorbing hydrodynamics: a transport-limited and an absorber-limited regime. In the transport-limited regime, measurements or additional unitary operations must move the pair endpoints until the pair reaches a bond on which feedback acts. In the absorber-limited regime, this motion is fast and removal by feedback sets the rate. We prove that the fraction of pair configurations accessible to feedback bounds the relaxation rate, regardless of how rapidly measurements or additional unitary operations move the endpoints. Local feedback acts on O(Nq)O(N_q) of O(Nq2)O(N_q^2) pair configurations, so the relaxation time is at least linear in NqN_q. The bound is saturated in the absorber-limited regime. Accelerating pair motion drives a crossover from the transport-limited to the absorber-limited regime, at which the preparation time reaches the bound set by the feedback geometry; this crossover marks the optimal use of transport-generating resources, e.g., additional unitaries.

We compute exact solutions that connect these relaxation rates to preparation times through fidelity bounds. Extensions to single-spin errors determine the stationary leakage and recovery rate, which quantifies the accuracy of autonomous stabilization. We compare the resulting time and resource requirements with unitary and adaptive preparation schemes in Sec. IX. Section II and Table I summarize the main results.

Summary of main results

Below we summarize the main results, which follow from the three exact operator closures and together characterize Dicke-state preparation through FFC. Throughout this summary, feedback is maximal, converting every detected singlet into a triplet, and rates are measured in units of the measurement rate per bond; the general case with feedback strength λ\lambda is treated in the text. We determine how quickly and accurately the target manifold is reached, which stationary state is selected, and how physical errors and ensemble fluctuations affect preparation. To understand what limits the rate and how it can be improved, we compare measurement and feedback geometries in different spatial dimensions, calculating the time required for pairs to reach feedback bonds and be removed. In one spatial dimension, we obtain an exact closed-form solution for a periodic chain with nearest-neighbor bond measurements. For other measurement geometries and higher dimensions, we construct the exact generators and derive asymptotic scaling laws.

ResultEquation or theoremSectionStatus
– Pair closure on any connected measurement graph; mapping to an absorbing random walkEqs. (38), (39)Sec. IV Bexact solution
– Two-sided infidelity bound from the witness W^\hat{W}; state-independent preparation timeEqs. (55), (59)Sec. IV Fexact bounds
– Liouvillian gap boundEq. (80)Sec. IV Iexact bound
– Pair spectrum of the periodic chain, Λpair=2[1−cos⁡(π/Nq)]\Lambda_{\mathrm{pair}} = 2[1-\cos(\pi/N_q)]Eq. (39)Sec. IV Dexact solution
– Preparation laws for bulk, boundary, and finite-region feedback in dd dimensions, transverse dimension n=2d−dfbn = 2d-d_{\mathrm{fb}}Eqs. (103), (115); Table 2Sec. VI Aasymptotic laws
– Transport-to-absorber crossover under random partial-SWAP transport, zprep=max⁡{2−α,1}z_{\mathrm{prep}}=\max\{2-\alpha,1\}; coherent exchange leaves the one-singlet rates unchangedEqs. (97), (96)Secs. V, V Cexact spectrum; asymptotic exponent
– All-to-all monitoring, Λpairall=2/(Nq−1)\Lambda_{\mathrm{pair}}^{\mathrm{all}}=2/(N_q-1)Eq. (152)Sec. IX Bexact solution
– Speed limit: the relaxation rate cannot exceed the fraction of configurations on which feedback actsProp. 1, Eq. (46)Sec. IV Eexact bound
– Unique stationary states selected through conserved collective-spin operatorsProp. 3, Eq. (69)Sec. IV Hexact solution
– Stabilization against isotropic single-qubit errors: stationary profile, recovery rate, leakage ϵcert∼κNqzprep+1\epsilon_{\mathrm{cert}}\sim\kappa N_q^{z_{\mathrm{prep}}+1}Eqs. (128), (135), (123)Sec. VIIexact solution; asymptotic law
– Ensemble covariance: second-moment closure, conserving measurement noise, shot noise of removalThm. 5, Eqs. (127), (159), (160)Sec. VIIIexact solution

Table 1. Overview of principal results.

feedbackbulkfinite regionboundary
(dfb=dd_{\mathrm{fb}} = d)(dfb=0d_{\mathrm{fb}} = 0)(dfb=d−1d_{\mathrm{fb}} = d - 1)
d=1d = 1L2L^2L2log⁡LL^2\log LL2log⁡LL^2\log L
d=2d = 2L2log⁡LL^2\log LL4L^4L3L^3
d>2d > 2LdL^dL2dL^{2d}Ld+1L^{d+1}

Table 2. Asymptotic scaling of the pair relaxation time for regular feedback geometries. LL is the linear size of the physical lattice, with Nq=LdN_q = L^d. Microscopic rates and the transverse thickness of the feedback set are held fixed.

Pair closure and preparation bounds

On any connected measurement graph of NqN_q qubits, the dynamics of the pair projectors P^nm\hat{P}_{nm} closes exactly, Eq. (38): a measurement on a bond moves one endpoint of a pair along that bond, and feedback removes a pair whose endpoints form a measured bond. The exact evolution of the Np=12Nq(Nq−1)N_p=\frac{1}{2}N_q(N_q-1) pair projectors is equivalent to a classical random walk with absorption, governed by a symmetric positive-definite matrix KK, Eq. (39); see Figure 1. The smallest eigenvalue Λ0>0\Lambda_0>0 of KK is the slowest pair decay rate. The witness W^=∑n<mP^nm\hat{W}=\sum_{n<m}\hat{P}_{nm}, the total pair operator, vanishes on the Dicke manifold. Its expectation value is at least Nq/2N_q/2 for every state orthogonal to that manifold and never exceeds Nq(Nq+2)/8N_q(N_q+2)/8. Consequently, W(t)=⟨W^⟩tW(t)=\langle\hat{W}\rangle_t gives exact upper and lower bounds on the infidelity ϵ(t)\epsilon(t), the weight outside the target manifold:

8W(t)Nq(Nq+2)≤ϵ(t)≤2W(t)Nq.(1)\frac{8W(t)}{N_q(N_q+2)}\leq\epsilon(t)\leq\frac{2W(t)}{N_q}. \tag*{(1)}

Let TϵT_\epsilon denote the earliest time beyond which the infidelity stays below ϵ\epsilon. The closed pair dynamics and the upper infidelity bound give the state-independent preparation bound

Tϵ≤1Λ0log⁡[(Nq−1)(Nq+2)2ϵ].(2)T_\epsilon\leq\frac{1}{\Lambda_0}\log\left[\frac{\sqrt{(N_q-1)(N_q+2)}}{2\epsilon}\right]. \tag*{(2)}

The same bounds constrain the Liouvillian gap ΔLiou\Delta_{\mathrm{Liou}}, the slowest nonzero decay rate of the full many-body dynamics,

Λ02≤ΔLiou≤Λ0.(3)\frac{\Lambda_0}{2}\leq\Delta_{\mathrm{Liou}}\leq\Lambda_0. \tag*{(3)}

The upper bound holds because −Λ0-\Lambda_0 is an exact Liouvillian eigenvalue; the factor of two in the lower bound comes from the square root relating trace distance to infidelity.

Preparation as a first-passage problem: Configuration space and absorber

The random walk does not take place on the lattice but in the configuration space of pairs. A configuration is an unordered pair of sites, the two endpoints of a pair projector P^nm\hat{P}_{nm}, and there are Np=Nq(Nq−1)/2N_p=N_q(N_q-1)/2 of them. On a lattice of linear size LL in dd dimensions this space is 2d2d-dimensional, Np∼L2dN_p \sim L^{2d}, because both endpoints move. Feedback acts only on pairs whose two sites form a measured bond on which a correction is applied. We call these pairs absorbing and their set the absorber, F\mathcal{F}. With local feedback on nearest-neighbor bonds, ∣F∣=dNq|\mathcal{F}| = dN_q, so feedback acts on O(Nq)O(N_q) of the O(Nq2)O(N_q^2) configurations, and a pair has to be transported to the absorber before it can be removed. This mismatch between the size of the configuration space and the size of the absorber is the origin of the preparation time. Monitoring more pairs enlarges the absorber but does not raise this limit: when the chain is compared with all-to-all monitoring at the same total measurement rate, NqN_q pair measurements per unit time, the total rate at which pair weight can be removed is at most NqN_q for both. It can, however, bring the actual relaxation rate closer to the limit. Since the pair weights follow a random walk with absorption on this space, Λ0\Lambda_0 is a first-passage rate: the rate at which a walker in configuration space reaches the absorber. A first-passage rate is determined by the space in which the walker moves, by how fast it moves, and by where it is absorbed. The preparation rate can therefore be understood, and changed, by changing each of these three elements. After solving the chain exactly, we change them in turn.

Exact solution in one dimension

For a periodic chain of NqN_q qubits with nearest-neighbor bond measurements {P^ℓ,ℓ+1}\{\hat{P}_{\ell,\ell+1}\}, we diagonalize the pair dynamics exactly. The slowest decay rate is

Λpair=2[1−cos⁡(πNq)]∼Nq→∞π2Nq2.(4)\Lambda_{\mathrm{pair}} = 2\left[1-\cos\left(\frac{\pi}{N_q}\right)\right] \underset{N_q\to\infty}{\sim} \frac{\pi^2}{N_q^2}. \tag*{(4)}

The expression is exact for every NqN_q and gives a relaxation time τpair=1/Λpair∼Nq2\tau_{\mathrm{pair}}=1/\Lambda_{\mathrm{pair}}\sim N_q^2. The preparation and gap bounds above apply with Λ0=Λpair\Lambda_0=\Lambda_{\mathrm{pair}}.

Preparation laws for general feedback geometries

References

  1. [1]B. Kraus, H. P. Büchler, S. Diehl, A. Kantian, A. Micheli, and P. Zoller, Preparation of entangled states by quantum Markov processes, Phys. Rev. A 78, 042307 (2008).DOI
  2. [2]S. Diehl, A. Micheli, A. Kantian, B. Kraus, H. P. Büchler, and P. Zoller, Quantum states and phases in driven open quantum systems with cold atoms, Nat. Phys. 4, 878 (2008).DOI
  3. [3]F. Verstraete, M. M. Wolf, and J. I. Cirac, Quantum computation and quantum-state engineering driven by dissipation, Nat. Phys. 5, 633 (2009).DOI
  4. [4]L. Piroli, G. Styliaris, and J. I. Cirac, Quantum circuits assisted by local operations and classical communication: Transformations and phases of matter, Phys. Rev. Lett. 127, 220503 (2021).DOI
  5. [5]P. M. Harrington, E. J. Mueller, and K. W. Murch, Engineered dissipation for quantum information science, Nat. Rev. Phys. 4, 660 (2022).DOI
  6. [6]J. T. Barreiro, M. Müller, P. Schindler, D. Nigg, T. Monz, M. Chwalla, M. Hennrich, C. F. Roos, P. Zoller, and R. Blatt, An open-system quantum simulator with trapped ions, Nature 470, 486 (2011).DOI
  7. [7]Y. Lin, J. P. Gaebler, F. Reiter, T. R. Tan, R. Bowler, A. S. Sørensen, D. Leibfried, and D. J. Wineland, Dissipative production of a maximally entangled steady state of two quantum bits, Nature 504, 415 (2013).DOI
  8. [8]C. Ryan-Anderson, J. G. Bohnet, K. Lee, D. Gresh, A. Hankin, J. P. Gaebler, D. Francois, A. Chernoguzov, D. Lucchetti, N. C. Brown, T. M. Gatterman, S. K. Halit, K. Gilmore, J. A. Gerber, B. Neyenhuis, D. Hayes, and R. P. Stutz, Realization of real-time fault-tolerant quantum error correction, Phys. Rev. X 11, 041058 (2021).
  9. [9]D. Bluvstein, S. J. Evered, A. A. Geim, S. H. Li, H. Zhou, T. Manovitz, S. Ebadi, M. Cain, et al., Logical quantum processor based on reconfigurable atom arrays, Nature 626, 58 (2024).
  10. [10]T.-C. Lee, J. Ho, Y.-H. Lu, T. Xiang, N. B. Vilas, Z. Yan, and D. M. Stamper-Kurn, Rapid cavity-based mid-circuit measurement and feedforward in a neutral atom array, arXiv preprint (2026), arXiv:2606.24869 [quant-ph].arxiv.org/abs/2606.24869
  11. [11]C. K. Andersen, A. Remm, S. Lazar, S. Krinner, J. Heinsoo, J.-C. Besse, M. Gabureac, A. Wallraff, and C. Eichler, Entanglement stabilization using ancilla-based parity detection and real-time feedback in superconducting circuits, npj Quantum Information 5, 69 (2019).DOI
  12. [12]T. Dörsler, T. Iadecola, J. H. Wilson, and M. Buchhold, Frustration-free control and absorbing-state transport in entangled state preparation, Phys. Rev. Lett. 136, 120603 (2026).
  13. [13]J. Hauser, Y. Li, S. Vijay, and M. P. A. Fisher, Continuous symmetry breaking in adaptive quantum dynamics, Phys. Rev. B 109, 214305 (2024).arxiv.org/abs/2304.13198
  14. [14]R. H. Dicke, Coherence in spontaneous radiation processes, Phys. Rev. 93, 99 (1954).DOI
  15. [15]L. Pezzè, A. Smerzi, M. K. Oberthaler, R. Schmied, and P. Treutlein, Quantum metrology with nonclassical states of atomic ensembles, Rev. Mod. Phys. 90, 035005 (2018).DOI
  16. [16]D. B. Hume, C. W. Chou, T. Rosenband, and D. J. Wineland, Preparation of Dicke states in an ion chain, Phys. Rev. A 80, 052302 (2009).DOI
  17. [17]J. Feldmeier, Y.-J. Liu, M. D. Lukin, and S. Choi, Digital dissipative state preparation for frustration-free gapless quantum systems, arXiv preprint (2026), arXiv:2603.10119 [quant-ph].arxiv.org/abs/2603.10119
  18. [18]P. Zandari and M. Rasetti, Noiseless quantum codes, Phys. Rev. Lett. 79, 3306 (1997).
  19. [19]D. A. Lidar, I. L. Chuang, and K. B. Whaley, Decoherence-free subspaces for quantum computation, Phys. Rev. Lett. 81, 2594 (1998).DOI
  20. [20]A. Winter, Coding theorem and strong converse for quantum channels, IEEE Transactions on Information Theory 45, 2481 (1999).DOI
  21. [21]T. Ogawa and H. Nagaoka, Making good codes for classical-quantum channel coding via hypothesis testing, IEEE Transactions on Information Theory 53, 2261 (2007).
  22. [22]K. Beer and D. Burgharth, Global zero-excitation state preparation through subsystem cooling, arXiv preprint (2026), arXiv:2609.23960 [quant-ph].arxiv.org/abs/2609.23960
  23. [23]G. Pólya, Über eine aufgabe der wahrscheinlichkeitsrechnung betreffend die irrfiahrt im straßennetz, Mathematische Annalen 84, 149 (1921).DOI
  24. [24]F. Spitzer, Principles of Random Walk, Graduate Texts in Mathematics (Springer, New York, 1964).
  25. [25]S. Redner, A Guide to First-Passage Processes (Cambridge University Press, 2001).
  26. [26]D. Holcman and Z. Schuss, The narrow escape problem, SIAM Rev. 56, 213 (2014).DOI
  27. [27]P. A. Nosov, D. S. Shapiro, M. Goldstein, and I. S. Burmistrov, Reaction-diffusive dynamics of number-conserving dissipative quantum state preparation, Phys. Rev. B 107, 174312 (2023).
  28. [28]T. Pokart, L. König, S. Diehl, and J. C. Budich, Diffusion in quantum state preparation: From passive cooling to system-bath engineering, Phys. Rev. Research 8, 023336 (2026).DOI
  29. [29]Y. Li, A. Mitra, and T.-C. Lu, State preparation via measurement and feedback: Pushing relations, state structures, and non-invertible symmetries, arXiv preprint (2026), arXiv:2608.08821 [quant-ph].arxiv.org/abs/2608.08821
  30. [30]T.-C. Lu, L. A. Lessa, I. H. Kim, and T. H. Hsieh, Measurement as a shortcut to long-range entangled quantum matter, PRX Quantum 3, 040337 (2022).DOI
  31. [31]N. Tarasivadasakarn, R. Verresen, and A. Vishwanath, Shortest route to non-Abelian topological order on a quantum processor, Phys. Rev. Lett. 131, 060405 (2023).
  32. [32]A. Bärtschi and S. Eidenbenz, Deterministic preparation of Dicke states, in Fundamentals of Computation Theory (FCT 2019), Lecture Notes in Computer Science, Vol. 11651 (Springer, 2019) pp. 126–139.DOI
  33. [33]A. Bärtschi and S. Eidenbenz, Short-depth circuits for Dicke state preparation, in IEEE International Conference on Quantum Computing and Engineering (QCE) (2022).DOI
  34. [34]M. R. Joshi and F. Vasconcelos, Constant-depth unitary preparation of Dicke states, arXiv preprint (2026).arxiv.org/abs/2601.10693
  35. [35]L. Gretta, M. Gupta, and M. R. Joshi, Polylogarithmic-weight Dicke states in QAC⁰ and arbitrary symmetric states in QAC⁰f, arXiv preprint (2026), arXiv:2604.15298 [quant-ph].arxiv.org/abs/2604.15298
  36. [36]J. Yu, S. R. Muleady, Y.-X. Wang, N. Schine, A. V. Gorshkov, and A. M. Childs, Efficient preparation of Dicke states, Phys. Rev. Lett. 136, 030601 (2026).arxiv.org/abs/2411.03428
  37. [37]R. Luo, J. Chen, and X. Ma, Constant-depth adaptive preparation of Dicke and symmetric states, arXiv preprint (2026), arXiv:2608.01144 [quant-ph].arxiv.org/abs/2608.01144
  38. [38]E. H. Lieb and D. W. Robinson, The finite group velocity of quantum spin systems, Commun. Math. Phys. 28, 251 (1972).
  39. [39]S. Bravyi, M. B. Hastings, and F. Verstraete, Lieb-Robinson bounds and the generation of correlations and topological quantum order, Phys. Rev. Lett. 97, 050401 (2006).pubmed.ncbi.nlm.nih.gov/17026080
  40. [40]T. Dörstel, T. C. Lang, T. Iadecola, J. H. Wilson, and M. Buchhold, Data and code for Exact first-passage theory of frustration-free quantum control (2026).
  41. [41]H. K. Khalil, Nonlinear Systems, 3rd ed. (Prentice Hall, Upper Saddle River, NJ, 2002).

Paper details

vlnc:W_cxrgupr9
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 10

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Claude Fable 5.1 (bare)

View statement
Looking for related papers…
Contents