betaFeedback

WorksMathematics

Iso-Multiplication Modules over Noncommutative Rings: Triangular Classification and Rational Rigidity

Abstract

A right A-module M is called iso-multiplication if for every submodule N of M there is a two-sided ideal B of A such that N ?A MB. We construct noncommutative examples of isomultiplication modules which are not multiplication modules, including triangular algebras of arbitrary dimension. We classify all iso-multiplication modules over T_2(k) without a finitegeneration assumption. For a semiprime right Goldie ring we prove that the classical localization of an iso-multiplication module is multiplicity-free. Further consequences address composition length and local rings; we distinguish these from standard Morita, Ore-localization, and chaincondition results.

Introduction

All rings are assumed to be associative and to have an identity 1≠01 \ne0; all modules are unital right modules. An ideal means a two-sided ideal. For a right AA-module MM and an ideal BB of AA, we denote by MBMB the submodule consisting of all finite sums of elements mbmb, where m∈Mm \in M and b∈Bb \in B. Following Tuganbaev [6, 7], the module MM is called a multiplication module (an m-module) if for every submodule NN of MM there exists an ideal BB of AA such that N=MBN = MB.

We call MM an iso-multiplication module (an im-module) if for every submodule N≤MN \le M there exists an ideal BB of AA such that N≅AMBN \cong_A MB. The isomorphism is AA-linear and need not be the restriction of an automorphism of MM. Every multiplication module is an iso-multiplication module. For noncommutative rings the converse is not true. In particular, a right ideal can be isomorphic to a two-sided ideal without being a two-sided ideal.

The decomposition of representations of the one-arrow quiver, the Morita ideal correspondence, and the standard theorems on Ore localization are not new. The manuscript’s main contributions are the selection of iso-multiplication objects from the standard triangular-module classification and the multiplicity obstruction obtained by applying the iso-multiplication hypothesis after Goldie localization. For comparison with multiplication modules and chain conditions we use [6, 10, 11]; no new proof of the pre-existing classifications is claimed.

Scope and provenance of the principal results.

TopicExisting ingredientsContribution here
Triangular modulesStandard representations of the A2A_2 quiverComplete iso-multiplication selection for T2(k)T_2(k), including arbitrary cardinal multiplicities
Goldie localizationGoldie’s theorem and exact classical Ore localizationMultiplicity-freeness of M⊗AQM \otimes_A Q for every iso-multiplication MM
Isoartinian regular ringsFacchini–Nazemian [11 Theorem 4.7(1)]Elimination of matrix factors under the extra regular-module iso-multiplication condition

Table 1.

The other statements are applications, obstructions, or supporting examples and should be read accordingly.

The principal examples are the regular right modules of triangular rings. For a field kk, the right regular module of T2(k)T_2(k) is iso-multiplication but is not a multiplication module. We give the complete classification of iso-multiplication modules over this ring, including infinitely generated modules. The triangular construction extends to A(V)A(V) for arbitrary nonzero kk-vector spaces VV, including infinite-dimensional cases. Related examples are obtained from skew polynomial rings, direct products, factor rings, and Morita equivalences.

We prove that an iso-multiplication module over a semiprime right Goldie ring has multiplicity-free classical localization. This is a necessary condition, not a characterization of iso-multiplication. In particular, if the regular module AAA_A is iso-multiplication, the classical right ring of quotients of AA is a finite product of division rings. This condition is necessary but not sufficient. We also obtain bounds on composition length when the ring has finitely many ideals, a cyclicity result for local rings, and results on chain conditions up to isomorphism.

We give some notation. The set of submodules of MM is denoted by L(M)\mathcal{L}(M). For N≤MN \leq M we set

(N:M)={a∈A:Ma⊆N}=rA(M/N).(N : M) = \{a \in A : Ma \subseteq N\} = r_A(M/N).

Thus (N:M)(N : M) is a two-sided ideal. Here rA(Y)r_A(Y) and Ann⁡A(Y)\operatorname{Ann}_A(Y) both denote the two-sided annihilator {a∈A:Ya=0}\{a \in A : Ya = 0\} of a right AA-module YY; in particular, (N:M)=Ann⁡A(M/N)(N : M) = \operatorname{Ann}_A(M/N). We write lA(X)l_A(X) for the composition length of XX (when finite) and u.dim⁡A(X)\operatorname{u.dim}_A(X) for its right uniform or Goldie dimension (the supremum of the numbers of nonzero summands in finite internal direct sums of submodules). We use [X][X] only for the isomorphism class of XX; [X:S][X : S] denotes the Jordan–Hölder multiplicity of a simple module SS in a finite-length module XX. If SS is a module and λ\lambda a cardinal, S(λ)S^{(\lambda)} denotes a direct sum of λ\lambda copies of SS. For a semiprime right Goldie ring AA, we write CC for the set of regular elements, Qclr(A)Q^r_{\mathrm{cl}}(A) for its classical right ring of quotients, and MQ=M⊗AQM_Q = M \otimes_A Q when Q=Qclr(A)Q = Q^r_{\mathrm{cl}}(A). For a submodule N≤MN \leq M we write

NQ:=im⁡(N⊗AQ⟶M⊗AQ)⊆MQ.N_Q := \operatorname{im}(N \otimes_A Q \longrightarrow M \otimes_A Q) \subseteq M_Q.

Exactness of classical Ore localization identifies this image canonically with N⊗AQN \otimes_A Q; whenever two such localized submodules are called equal, equality is meant inside MQM_Q, whereas ≅Q\cong_Q always denotes an abstract QQ-module isomorphism. The terms isomultiplication and isoartinian are used for the corresponding chain conditions up to isomorphism [11, 12].

Examples and elementary properties

For a right AA-module MM and a two-sided ideal BB of AA, we use MBMB in the sense defined in the Introduction. In particular, for the regular module AAA_A, we have AB=BAB=B. The distinction between right ideals and two-sided ideals is essential in the following examples.

Proposition 2.1. For every right module MM the following hold:

(i) MM is a multiplication module if and only if N=M(N:M)N=M(N:M) for every N∈L(M)N\in\mathcal{L}(M).

(ii) Every multiplication module is an iso-multiplication module; the iso-multiplication property is invariant under isomorphisms.

(iii) The zero module and every simple module are iso-multiplication modules (indeed, multiplication modules).

Proof. If N=MBN=MB, then B⊆(N:M)B\subseteq(N:M), so N=MB⊆M(N:M)⊆NN=MB\subseteq M(N:M)\subseteq N. Conversely, use B=(N:M)B=(N:M). The other assertions follow from the definitions; an isomorphism f:M→M′f:M\to M' maps MBMB onto M′BM'B while a simple module has only the submodules 0=M00=M0 and M=MAM=MA. □\square

Remark 2.2. For an iso-multiplication module, N≅MBN\cong MB does not imply B⊆(N:M)B\subseteq(N:M), and it does not imply N≅M(N:M)N\cong M(N:M). The distinction is demonstrated explicitly in Example 2.4.

Proposition 2.3. The module MAM_A is an iso-multiplication module precisely when the map

{B:B◃A}⟶{[N]:N∈L(M)},B↦[MB]\{B:B\triangleleft A\}\longrightarrow\{[N]:N\in\mathcal{L}(M)\},\qquad B\mapsto[MB]

is surjective. In particular, for every N≤MN\leq M there is an ideal BB with Ann⁡A(N)=Ann⁡A(MB)\operatorname{Ann}_A(N)=\operatorname{Ann}_A(MB); equality of annihilators alone is not sufficient.

Proof. The first assertion is the definition expressed in terms of isomorphism classes. An AA-linear isomorphism preserves annihilators. To see why annihilator equality alone does not imply the defining isomorphism, let A=kA=k and M=k2M=k^2. The submodule N=k⊕0N=k\oplus0 and the ideal multiple MA=MMA=M have the same zero annihilator, but N̸≅AMN\not\cong_A M. □\square

Examples over triangular and principal right ideal rings

Example 2.4. Let kk be any field, A=T2(k)={(ab0c):a,b,c∈k}A=T_2(k)=\left\{\begin{pmatrix}a&b\\0&c\end{pmatrix}:a,b,c\in k\right\} and M=AAM=A_A. Denote the matrix units by e11,e12,e22e_{11},e_{12},e_{22}. The complete list of two-sided ideals is

0,J=ke12,K=ke12⊕ke22,L=ke11⊕ke12,A.0,\qquad J=ke_{12},\qquad K=ke_{12}\oplus ke_{22},\qquad L=ke_{11}\oplus ke_{12},\qquad A.

The right AA-module KK is a direct sum of two copies of S2=e22A=ke22S_2=e_{22}A=ke_{22}; both e12e_{12} and e22e_{22} are multiplied by (ab0c)\begin{pmatrix}a&b\\0&c\end{pmatrix} through the scalar cc. Consequently, any right ideal U⊆KU\subseteq K is a kk-linear subspace and satisfies

U≅{0,dim⁡kU=0,J,dim⁡kU=1,K,dim⁡kU=2.U\cong\begin{cases} 0,&\dim_k U=0,\\ J,&\dim_k U=1,\\ K,&\dim_k U=2. \end{cases}

If a right ideal UU is not contained in KK, choose u=ae11+be12+ce22∈Uu=ae_{11}+be_{12}+ce_{22}\in U with a≠0a\ne0. Then ue11=ae11ue_{11}=ae_{11} and e11e12=e12e_{11}e_{12}=e_{12} show L=e11A⊆UL=e_{11}A\subseteq U. Since A/LA/L is simple, U=LU=L or AA. Every right ideal is therefore isomorphic to one of 00, JJ, KK, LL, AA. Since MB=AB=BMB = AB = B for each ideal BB, AAA_A is iso-multiplication.

It is not a multiplication module: N=e22A=ke22N = e_{22}A = ke_{22} is a right ideal but not two-sided, because e12e22=e12∉Ne_{12}e_{22} = e_{12} \notin N. Nevertheless,

e22A⟶J=e12A,e22a↦e12ae_{22}A \longrightarrow J = e_{12}A,\qquad e_{22}a \mapsto e_{12}a

is a well-defined AA-isomorphism. Moreover (N:M)=0(N : M) = 0, as there is no nonzero two-sided ideal inside ke22ke_{22}. Thus M(N:M)=0≠NM(N : M) = 0 \ne N.

References

  1. [1]M. M. Ali, Some remarks on multiplication and projective modules II, Communications in Algebra 41 (2013), no. 1, 195–214. https://doi.org/10.1080/00927872.2011.628724.
  2. [2]Y. Tolooei, Multiplication modules that are finitely generated, Journal of Algebraic Systems 8 (2020), no. 1, 1–5. https://doi.org/10.22044/jas.2019.8699.1421.
  3. [3]T. Y. Lam, Lectures on Modules and Rings, Graduate Texts in Mathematics 189, Springer, 1999, chapters on Morita equivalence and ideals.DOI
  4. [4]B. Stenström, Rings of Quotients: An Introduction to Methods of Ring Theory, Grundlehren der mathematischen Wissenschaften, vol. 217, Springer, Berlin–Heidelberg, 1975. https://doi.org/10.1007/978-3-642-66066-5.
  5. [5]L. W. Small, Noncommutative ring theory: lecture notes, Section 5 (Goldie localization and semisimple classical quotients), course notes, University of California, San Diego (online resource, accessed 14 November 2026). https://mathweb.ucsd.edu/~lwsma11/MATH207A/ringtheorynotes.pdf.
  6. [6]A. A. Tuganbaev, Multiplication modules over non-commutative rings, Sbornik: Mathematics 194 (2003), no. 12, 1837–1864. https://doi.org/10.1070/SM2003v194n12ABEH000788.
  7. [7]A. A. Tuganbaev, Multiplication modules, Journal of Mathematical Sciences 123 (2004), no. 2. https://doi.org/10.1023/B:JOTH.0000036653.76231.05.
  8. [8]A. A. Tuganbaev, Flat and multiplication modules, Journal of Mathematical Sciences 128 (2005), 2998–3004. https://doi.org/10.1007/s10958-005-0246-4.
  9. [9]A. A. Tuganbaev, Multiplication modules and ideals, Journal of Mathematical Sciences 136 (2006), 4116–4130. https://doi.org/10.1007/s10958-006-0223-6.
  10. [10]T. Alsuraiheed and V. V. Bavula, Criteria for a direct sum of modules to be a multiplication module over noncommutative rings, Journal of Algebra 584 (2021), 69–88. https://doi.org/10.1016/j.jalgebra.2021.05.006.
  11. [11]A. Facchini and Z. Nazemian, Modules with chain conditions up to isomorphism, Journal of Algebra 453 (2016), 578–601. https://doi.org/10.1016/j.jalgebra.2016.01.025.
  12. [12]A. Facchini and Z. Nazemian, Artinian dimension and isoradical of modules, Journal of Algebra 484 (2017), 66–87. https://doi.org/10.1016/j.jalgebra.2017.03.039.
  13. [13]Z. Nazemian and D. Yazdonov, A prime isoartinian ring that is not noetherian, preprint, 16 October 2026, arXiv:2610.23129. https://arxiv.org/abs/2610.23129.

Paper details

vlnc:W_d36e7hh6
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC0-1.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

ChatGPT (OpenAI)

View statement
Looking for related papers…
Contents