WorksPhysics and Astronomy
Nonlinear Hall Effect in Metal-Organic Frameworks
Abstract
We propose metal-organic frameworks (MOFs) as tunable platforms for nonlinear Hall responses. A universal analytical downfolding scheme maps -symmetric frameworks onto star- and honeycomb-lattice models, reproducing first-principles Dirac features. Spin-orbit coupling and broken inversion symmetry gap the Dirac cones, generating Berry-curvature hot spots. Symmetry analysis identifies tailored synthetic pathways, including linker design, as intrinsic routes to engineer nonlinear Hall transport beyond strain and substrate control.
Introduction
The nonlinear Hall effect (NLHE) is an unconventional transverse response that can arise in time-reversal-invariant crystals when inversion symmetry is broken. Unlike the conventional anomalous Hall effect, where the Berry curvature of Bloch bands governs the linear Hall response as an effective magnetic field in momentum space [1, 2, 3], the NLHE originates from an asymmetric Berry-curvature distribution across the Brillouin zone [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14]. This asymmetry, encoded in the Berry-curvature dipole, enables a second-order Hall response even in time-reversal-symmetric systems. Its relevance for rectification [15, 16], photodetection [17], and photovoltaic responses [18] motivates the search for platforms where symmetry and band geometry can be engineered.
Metal–organic frameworks (MOFs), composed of metal nodes linked by organic ligands [19, 20], offer such control through their structural and chemical tunability. Their electronic bands can be engineered by choosing metal centers and organic linkers, making MOFs natural platforms for designer lattice models [21]. In particular, two-dimensional (2D) MOFs have been predicted to host Dirac and flat bands, as well as topological-insulator and Chern-insulator phases [22, 23, 24, 25, 26]. Nevertheless, their potential for NLHE remains largely unexplored.
In this Letter, we introduce a downfolding framework that maps MOFs onto effective lattice models for designing strong and controllable NLHE. Focusing on -symmetric 2D MOFs, we show that the experimentally relevant Cu-dicyano-anthracene (Cu–DCA) monolayer [27, 28, 29], pyrazine-metal and triphenyl-metal (metal = Pb/Bi) MOF [22, 30] can be mapped onto effective star and honeycomb lattice descriptions through real-space decimation [31, 32, 33, 34]. The resulting hopping parameters reproduce the distinct first-principles band topologies, including gapped Dirac cones that provide a natural source of Berry-curvature hot spots. This mapping provides a route to connect chemical and structural tunability with symmetry-selective band geometry, identifying strain engineering and symmetry-lowered sister compounds as practical pathways to finite Berry curvature, a tunable Berry-curvature dipole, and sizable NLHE in MOFs.
Downfolding of Cu–DCA
We begin with the experimentally synthesized Cu–DCA MOF, shown in Figure 1(a) [35, 36, 37, 38, 39]. Its first-principles band structure [Fig. 1(b)] is semimetallic and hosts Dirac crossings at the high-symmetry point [27, 40]. Since gap opening at such crossings produces Berry-curvature hot spots, Cu–DCA is a natural starting point for NLHE engineering once SOC is included and inversion symmetry is broken.

Figure 1. From Cu–DCA to the effective star lattice. (a) Relaxed Cu–DCA monolayer. Inset: the three N atoms around each Cu site form an effective triangle after Cu decimation. (b) Orbital-projected bands showing dominant C/N character near the Fermi level. (c) Linker decimation: eliminated sites are marked in red, yielding renormalized terminal hoppings between and . (d) Effective six-site star lattice spanned by and , with intra-triangle hoppings and , inter-triangle hopping modified to under uniaxial anisotropy, and intrinsic Kane–Mele SOC shown by green arrows.
The orbital-resolved bands show that the low-energy states are dominated by C/N orbitals, while Cu contributes weakly near the Fermi level [Fig. 1(b)]. This motivates a single-orbital C/N description. We first decimate the Cu-centered coordination environment into effective hoppings among the three surrounding N atoms, forming equilateral triangles [inset of Fig. 1(a)]. A second decimation integrates out the linker segment between neighboring triangles, yielding the star-lattice geometry with renormalized hoppings [Fig. 1(c)]. The analytical flow and parameters are summarized in Supplementary Sec. S6B. Thus, Cu–DCA is reduced to a compact effective model retaining the Dirac crossings and low-energy band geometry relevant for the NLHE.
Dipolar component of Berry curvature
The downfolded lattice in Figure 1(d) has a six-site unit cell formed by two inequivalent triangular motifs, with intra-triangle hoppings and . Neighboring triangles are connected by in the pristine lattice and by under uniaxial anisotropy. The effective Hamiltonian is
where contains intra- and inter-triangle hoppings, encodes inversion-breaking onsite offsets between triangular subunits, and is a Kane–Mele-type intrinsic SOC term. The full real-space form is given in Supplementary Sec. S1A.
Representative band structures of the star lattice without SOC are shown in Supplementary Fig. S1.1. We focus on the parameter regime in which two kagome-like band manifolds are energetically separated, since this is the regime that reproduces the first-principles electronic structure of Cu–DCA. Once SOC and inversion-symmetry breaking are included, gaps open at the Dirac crossings. These gap openings are the source of sharply localized Berry-curvature hot spots and, once the remaining point-group symmetry is broken appropriately, of a finite dipolar component.
To make that connection explicit, we first analyze the Berry-curvature distribution of the effective model. For a two-dimensional Bloch band , the only nonvanishing component is , which can be written as
Time-reversal symmetry imposes , so the linear anomalous Hall response vanishes after Brillouin-zone integration, while the nonlinear response can survive through the first moment of Berry curvature once inversion symmetry is broken.
Figure Figure 2(a) shows the Berry-curvature-projected bands of the onsite-modulated star lattice with , , and . Increasing from to drives a band inversion near and reverses the Berry-curvature hot spots at the avoided crossings. The associated topological change is confirmed by the invariant from the Wannier charge center flow; see Supplementary Sec. S2 and Figure S1.2. The same mechanism also operates in the breathing version of the star lattice, as shown in Supplementary Sec. S3.

Figure 2. Berry curvature and Berry-curvature dipole in the star lattice. (a) Berry-curvature-projected bands of the onsite-modulated model with , , and for two SOC strengths. Increasing drives a band inversion near and reverses the Berry-curvature hot spots. (b) Corresponding versus Fermi level with small anisotropy , modeling 2% tensile strain. The strong enhancement and sign reversal near the critical point reflect the topological transition.

Figure S1.2. Wannier charge centers and topological phase transition. Upper panels (a,b): WCC evolution for the onsite-modulated model with , , and . Lower panels (c,d): WCC evolution for the breathing star lattice with and . In both cases, increasing drives a transition. An odd (even) number of crossings of a reference line within half of the Brillouin zone identifies the nontrivial (trivial) phase.
The dipolar component tensor is defined as
where is the Fermi–Dirac distribution. Within semiclassical Boltzmann theory, the static nonlinear Hall current is [4, 41, 42, 43, 44]
with the relaxation time and the dipolar component vector in two dimensions. When a single mirror plane is preserved, symmetry enforces while allowing [45]. For an in-plane electric field , the nonlinear Hall response therefore obeys with .
The energy-resolved response in Figure 2(b) shows that the dominant contribution to comes from the SOC-split Dirac crossings identified in Figure 2(a). In the onsite-modulated model, uniaxial 2% strain together with SOC yields a peak value near . In the breathing case, the corresponding peak is near [Supplementary Fig. S2.1]. Taking ps, these values translate into nonlinear Hall conductivities of order nm S V and nm S V, respectively; see Supplementary Sec. S4. The sharp enhancement and sign reversal of the dipolar component across the transition are thus direct consequences of SOC-driven band inversion in the effective star lattice.
Material implementation and design principles
Having identified the band-geometry mechanism in the effective model, we now return to the material level. Figure 3(a) shows that the DFT band structure of Cu–DCA indeed contains two energetically separated kagome-like band manifolds, with the Fermi level lying close to the Dirac point of the upper one. Using the DFT-consistent hoppings eV, eV, and eV, we compute the dipolar component phase diagram shown in Figure 3(b). The response is maximized near the topological phase boundary, where the SOC-induced avoided crossing produces strongly concentrated Berry curvature and a sign change of the dipolar component. This demonstrates that the effective star-lattice description captures not only the band structure but also the symmetry-controlled nonlinear response of the MOF.

Figure 3. Dipolar component of Berry curvature in MOFs. (a) DFT band structure of Cu–DCA with two separated kagome-like manifolds; the Fermi level lies near the Dirac point of the upper manifold. Inset: replacing one Cu atom by Zn breaks inversion symmetry. (b) Dipolar-component phase diagram obtained from DFT-consistent hoppings ( eV, eV, eV) in the presence of SOC, inversion-symmetry breaking, and 2% uniaxial strain. The dipolar component changes sign across the topological transition. (c) Synthesis-based route to intrinsic symmetry lowering by modifying one of the three equivalent linker directions. (d) Generalization to a pyrazine–metal MOF (Pb shown), which can also be downfolded to a star lattice; because the two Pb sites lie in different planes, a transverse electric field can break inversion symmetry. (e) Orbital-projected DFT band structure of pyrazine–Pb, showing that the star-lattice-like bands are dominated by C and N states, with no dominant Pb contribution near the Fermi level.
In Cu–DCA, inversion symmetry can be broken by an appropriate substrate, by heterostructure engineering, or by chemical substitution, as illustrated by the Zn-doped configuration in the inset of Figure 3(a). In addition, the uniaxial anisotropy required to expose a nonzero need not be supplied externally. Figure 3(c) sketches a synthesis-based route in which one of the three equivalent linker directions is modified, for example by directly connecting two anthracene-like units or by inserting an acetylenic bridge [46, 47]. In the decimated description, this changes the effective hopping between the terminal sites and of Figure 1(c) from to an anisotropic value along the selected direction, where is the hopping amplitude through the modified bridge. The resulting structure lowers the original symmetry to a single mirror plane and simultaneously removes inversion, thereby generating the finite Berry curvature and the symmetry-allowed dipolar component needed for the NLHE without externally applied strain.
Using Eq. (4), we estimate the experimentally observable response for two symmetry-lowered realizations: onsite modulation and breathing-type intra-triangle hopping modulation. For an in-plane electric field of magnitude V/m, the expected nonlinear Hall current reaches mA/cm in the onsite-modulated case and mA/cm in the breathing case (Supplementary Sec. S4). These values fall within current experimental sensitivity.
The design principle is not restricted to Cu–DCA. As illustrated in Figure 3(d), a second class of -symmetric MOFs, exemplified by a pyrazine–metal (Pb) MOF, which may be viewed as a nitrogentaed triphenyl–Pb framework [Figure S4.1], can likewise be downfolded to an effective star-lattice model, with an intertriangle hopping amplitude . In this structure, the two Pb sites in the unit cell reside in different planes, giving rise to an intrinsically buckled geometry. A transverse electric field, for example, induced by an underlying substrate, can then lift the remaining inversion symmetry in a controlled manner. When combined with SOC, this controlled inversion-symmetry breaking provides the essential ingredients for generating finite Berry curvature and the associated Berry-curvature-dipole response.

Figure S4.1. Honeycomb-lattice description of the triphenyl–metal MOF. (a) Structure of the triphenyl–Pb framework. Because the two Pb sites lie in different planes, a transverse electric field or substrate potential can break inversion symmetry. (b) DFT band structure of the pristine triphenyl–Pb framework, showing the characteristic honeycomb-lattice-like Dirac bands near the Fermi level. Here, for the pristine case , where denotes the effective nearest-neighbor hopping within the linker connecting the Pb atoms.
The pristine DFT band structure shown in Figure 3(e) closely follows the characteristic star-lattice dispersion, thereby validating the downfolded description. By contrast, the orbital-projected band structure of the triphenyl–Pb framework [Fig. S4.1(b)] shows that all constituent atoms contribute significantly to the Dirac-like bands near the Fermi level, indicating that its appropriate low-energy effective description is a honeycomb lattice rather than a star lattice. Nevertheless, in both cases, the same symmetry mechanism identified for Cu–DCA–namely, the selective extension of one-third of the nearest-neighbor intertriangle linkages through suitable linkers, should generate a finite NLHE in this broader class of MOFs.
More generally, any -symmetric MOF in which a metal center connects three symmetry-related nonmetal sites provides a natural starting point for realizing an effective star-lattice description and, consequently, tunable NLHE physics. Related MOF platforms, such as NiCSH [48], as well as suitably designed covalent organic frameworks [49, 50] and conjugated polymer networks [51], appear promising in the same spirit.
Conclusions
We have shown that two-dimensional MOFs provide a tunable platform for nonlinear Hall physics by combining analytical downfolding, symmetry analysis, and first-principles calculations. For Cu–DCA, real-space decimation yields an effective star lattice that captures the separated kagome-like bands and the Dirac feature near the Fermi level. Inversion-symmetry breaking and SOC then generate Berry-curvature hot spots and a Berry-curvature dipole whose magnitude and sign are controlled by the topological transition. The response can be engineered through substrates, doping, strain, or linker-level synthesis that embeds the required anisotropy. This strategy is universal and extends to broader -symmetric MOFs, including pyrazine- and triphenyl–metal networks, establishing MOFs as designable platforms for nonlinear Hall transport.
Acknowledgments
The authors gratefully acknowledge the Gauss Centre for Supercomputing e.V. (www.gauss-centre.eu) for funding this project by providing computing time on the GCS Supercomputer SuperMUC-NG at Leibniz Supercomputing Centre (www.lrz.de). The authors also acknowledge financial support by the Deutsche Forschungsgemeinschaft through Project–ID 258499086 – SFB 1170, through the Würzburg–Dresden Cluster of Excellence on Complexity and Topology in Quantum Matter – ctd.qmat, Project-ID 390858490 – EXC 2147, and through the Research Unit QUAST, Project-ID 449872909 – FOR5249. A.N. acknowledges support from DST CRG grant (CRG/2023/000114).
Supplemental Material: Nonlinear Hall Effect in Metal–Organic Frameworks
Effective star-lattice model
Hamiltonian
The effective star-lattice Hamiltonian is written as
The spin-independent hopping part reads
where and are the intra-triangle hoppings on the two inequivalent triangular motifs of the star lattice, while denotes the inter-triangle hopping in the pristine

Figure S1.1. Representative band structures of the pristine star lattice. Band structures along for , , and . Throughout the calculations, we set eV.
system. A breathing distortion corresponds to , and uniaxial anisotropy is modeled by replacing one of the inter-triangle hoppings by . Inversion-symmetry breaking through onsite modulation is captured by
where and are onsite energies on the two triangular subunits.
The intrinsic spin–orbit coupling is taken in Kane–Mele form,
where is the SOC strength, encodes the chirality of the hopping path, and is the spin matrix.
Representative band structures
Figure S1.1 shows representative band structures of the pristine star lattice along the high-symmetry path . By tuning the ratio between intra-triangle and inter-triangle hoppings, the model interpolates between dispersions with different degrees of kagome-like character. The regime emphasized in the main text is the one with two well-separated kagome-like band manifolds, because this reproduces the DFT band structure of Cu–DCA most closely and places the Fermi level near Dirac crossings that can be converted into Berry-curvature hot spots once SOC and inversion-symmetry breaking are introduced.
Wannier charge centers and the invariant
The maximally localized Wannier function associated with band index in the unit cell located at Bravais lattice vector is defined as the Fourier transform of the Bloch states,
where is the spatial dimension, is the -dimensional unit-cell volume (area in two dimensions), and with the lattice-periodic Bloch function. The Wannier charge center (WCC) along for the home cell () is
In time-reversal-invariant systems, the occupied subspace can be organized into Kramers pairs labeled by . For a given branch , the Berry connection is
and the corresponding WCC can be written as the Brillouin-zone average
To diagnose the topological phase transition discussed in the main text, we track the WCC flow as a function of for two representative symmetry-lowered star-lattice realizations. Figure S1.2(a,b) shows the onsite-modulated model with , , and for two values of . As the SOC strength is increased from to , the WCC flow changes from a topologically trivial to a nontrivial pattern, consistent with the band inversion at the point. Figure S1.2(c,d) shows the same analysis for the breathing star lattice with and , where the transition occurs between and .
The invariant is obtained by counting the number of WCC crossings with a reference line over half of the Brillouin zone [52, 53]. An odd number of crossings signals a topologically nontrivial phase, whereas an even number indicates a trivial phase.
Berry-curvature response in the breathing star lattice
In the main text, the onsite-modulated star lattice was used to illustrate the emergence of Berry-curvature hot spots and of a large BCD near the topological transition. The breathing star lattice shows the same qualitative physics and provides an independent route to inversion-symmetry breaking.
Figure S2.1(a) displays the Berry-curvature-projected band structure of the breathing model with and for two representative values of . Increasing from to induces a band inversion near the point in the positive-energy sector. Correspondingly, the Berry-curvature hot spots at the avoided crossings reverse sign, reflecting the change in band character across the inversion.

Figure S2.1. Berry curvature and Berry-curvature dipole in the breathing star lattice. (a) Berry-curvature-projected band structure for the breathing model with and , shown for two SOC strengths. (b) Corresponding BCD in the presence of a small anisotropy representing 2% tensile strain. The peak enhancement and sign reversal track the topological transition.
The resulting BCD is shown in Figure S2.1(b) for the same breathing model in the presence of a small inter-triangle anisotropy , taken to represent a 2% tensile strain. As in the onsite-modulated case, the dominant contribution is concentrated near the SOC-split Dirac crossings. The BCD therefore exhibits a pronounced enhancement close to the critical SOC strength and changes sign across the topological transition.
Nonlinear Hall conductivity estimates
To estimate the experimentally relevant NLHE response, we evaluate the angular dependence of the nonlinear Hall conductivity using Eq. (4) of the main text. Figure S3.1 shows the result for two symmetry-lowered realizations of the star lattice: onsite modulation and breathing-type intra-triangle hopping modulation. In both cases, the response follows the mirror-constrained angular dependence expected for a system with a single remaining mirror plane .

Figure S3.1. Angular dependence of the nonlinear Hall conductivity. Angular dependence of for the onsite-modulated and breathing realizations. Inset: geometry of the in-plane electric field (red arrow) applied at an angle relative to the mirror axis , generating a transverse nonlinear Hall current (blue arrow).
For an in-plane electric field of magnitude applied at an angle relative to , the nonlinear Hall current takes the form [44]. Using the BCD values discussed in the main text and a representative relaxation time , we obtain for the onsite-modulated case and for the breathing case. These values are within the reach of present experimental sensitivity.
Honeycomb-lattice downfolding of the triphenyl–Pb framework
In addition to the star-lattice descriptions discussed in the main text, the same downfolding philosophy can lead to a honeycomb-lattice effective model when the orbital content near the Fermi level is distributed over the full triphenyl–metal network. This situation is realized in the triphenyl–Pb framework shown in Figure S4.1. In contrast to Cu–DCA, where the metal orbitals contribute weakly near the Fermi level and can be integrated out in favor of an effective star lattice, the low-energy states of the triphenyl–Pb framework receive appreciable contributions from both the organic linkers and the Pb atoms. The appropriate effective degrees of freedom are therefore composite orbitals associated with the two sublattices of a honeycomb network.
The pristine DFT band structure in Figure S4.1 displays the characteristic Dirac dispersion of a honeycomb lattice near the Fermi level. At the minimal level, this electronic structure can be described by a nearest-neighbor honeycomb model,
where denotes the effective nearest-neighbor hopping between the two honeycomb sublattices, is the intrinsic spin–orbit coupling, and describes inversion-symmetry-breaking onsite potentials. The first term produces symmetry-protected Dirac cones, while SOC and inversion-symmetry breaking gap these crossings and generate Berry-curvature hot spots near the Fermi level.
Because the two Pb sites in the unit cell are vertically displaced, a transverse electric field or substrate potential provides a natural route to breaking inversion symmetry. Additional symmetry lowering, for example by anisotropic linker functionalization, can reduce the remaining symmetry and allow a finite Berry-curvature dipole. Thus, although the triphenyl–Pb framework is more naturally described by a honeycomb rather than a star lattice, it follows the same design principle for realizing nonlinear Hall responses in MOFs.
Methodology
DFT methodology
First-principles calculations were performed within density functional theory using the Quantum Espresso package [54, 55]. Exchange-correlation effects were treated within the Perdew–Burke–Ernzerhof generalized-gradient approximation [56], using the projector-augmented-wave framework [57]. Scalar-relativistic and fully relativistic pseudopotentials were employed for calculations without and with SOC, respectively. We used a kinetic-energy cutoff of 46 Ry and an Monkhorst–Pack mesh [58]. A vacuum spacing of 10 Å was introduced along the out-of-plane direction to suppress interlayer interactions. Topological properties and Berry-curvature-related observables were additionally benchmarked using the WannierBerri package [59], interfaced with PythTB [60].
Real-space decimation
The tight-binding form of the Schrödinger equation is
where is the eigenenergy, is the onsite potential on site , is the corresponding wave-function amplitude, and is the hopping amplitude between sites and .
For the linker segment connecting neighboring effective triangles [Fig. 1(c) of the main text], the local difference equations for the site pair can be written as
where denotes the nearest-neighbor hopping within the linker. Substituting Eq. (15) into the corresponding equation for the next pair ,
and taking the low-energy condition , one obtains
This identifies the first renormalized hopping as .
Iterating the same decimation step through the sequence of pairs , , , reduces the full linker segment to an effective bond between the terminal sites and shown in Figure 1(c) of the main text. The resulting renormalized parameters are
This analytical decimation establishes the effective star-lattice description used throughout the main text and provides the basis for relating the chemistry of the MOF linkers to the symmetry-selective hopping amplitudes of the low-energy model.
References
- [1]K. v. Klitzing, G. Dorda, and M. Pepper, New method for high-accuracy determination of the fine-structure constant based on quantized hall resistance, Phys. Rev. Lett. 45, 494 (1980).
- [2]D. Xiao, M.-C. Chang, and Q. Niu, Berry phase effects on electronic properties, Rev. Mod. Phys. 82, 1959 (2010).DOI
- [3]N. Nagaosa, J. Sinova, S. Onoda, A. H. MacDonald, and N. P. Ong, Anomalous hall effect, Rev. Mod. Phys. 82, 1539 (2010).DOI
- [4]I. Sodemann and L. Fu, Quantum nonlinear hall effect induced by berry curvature dipole in time-reversal invariant materials, Phys. Rev. Lett. 115, 216806 (2015).DOI
- [5]Z. Du, H.-Z. Lu, and X. Xie, Nonlinear hall effects, Nature Reviews Physics 3, 744 (2021).DOI
- [6]C. Ortix, Nonlinear hall effect with time-reversal symmetry: Theory and material realizations, Advanced Quantum Technologies 4, 2100056 (2021).DOI
- [7]A. Bandyopadhyay, N. B. Joseph, and A. Narayan, Nonlinear hall effects: Mechanisms and materials, Materials Today Electronics 8, 100101 (2024).DOI
- [8]Q. Ma, S.-Y. Xu, H. Shen, D. MacNeill, V. Fatemi, T.-R. Chang, A. M. Mier Valdivia, S. Wu, Z. Du, C.-H. Hsu, et al., Observation of the nonlinear hall effect under time-reversal-symmetric conditions, Nature 565, 337 (2019).DOI
- [9]K. Kang, T. Li, E. Sohn, J. Shan, and K. F. Mak, Nonlinear anomalous hall effect in few-layer wte2, Nature materials 18, 324 (2019).DOI
- [10]P. Makushko, S. Kovalev, Y. Zabila, I. Ilyakov, A. Ponomaryov, A. Arshad, G. L. Prajapati, T. V. A. G. de Oliveira, J.-C. Deinert, P. Chekhonin, I. Veremchuk, T. Kosub, Y. Skourski, F. Ganss, D. Makarov, and C. Ortix, A tunable room-temperature nonlinear hall effect in elemental bismuth thin films, Nature Electronics 7, 207 (2024).DOI
- [11]L. Min, H. Tan, Z. Xie, L. Miao, R. Zhang, S. H. Lee, V. Gopalan, C.-X. Liu, N. Alem, B. Yan, and Z. Mao, Strong room-temperature bulk nonlinear hall effect in a spin-valley locked dirac material, Nature Communications 14, 364 (2023).DOI
- [12]S. Sinha, P. C. Adak, A. Chakraborty, K. Das, K. Debnath, L. D. V. Sangani, K. Watanabe, T. Taniguchi, U. V. Waghmare, A. Agarwal, and M. M. Deshmukh, Berry curvature dipole senses topological transition in a moiré superlattice, Nature Physics 18, 765 (2022).DOI
- [13]X.-G. Ye, H. Liu, P.-F. Zhu, W.-Z. Xu, S. A. Yang, N. Shang, K. Liu, and Z.-M. Liao, Control over berry curvature dipole with electric field in wte2, Physical Review Letters 130, 016301 (2023).DOI
- [14]T. Nomoto, A. Kikkawa, K. Nakazawa, et al., Observation of the nonlinear chiral thermoelectric hall effect in tellurium, Nature Physics (2025).arxiv.org/abs/2503.08058
- [15]D. Kumar, C.-H. Hsu, R. Sharma, T.-R. Chang, P. Yu, J. Wang, G. Eda, G. Liang, and H. Yang, Room-temperature nonlinear hall effect and wireless radiofrequency rectification in few layer semimetal TaIrTe4, Nature Nanotechnology 16, 421 (2021).DOI
- [16]H. Wang and X. Qian, Ferroicty-driven nonlinear photocurrent switching in time-reversal invariant ferroic materials, Science Advances 5, eaav9743 (2019).DOI
- [17]J. Kim, K.-W. Kim, D. Shin, S.-H. Lee, J. Sinova, N. Park, and H. Jin, Prediction of ferroelectricity-driven Berry curvature enabling charge- and spin-controllable photocurrent in tin telluride monolayers, Nature Communications 10, 3965 (2019).
- [18]T. Rangel, B. M. Fregoso, B. S. Mendoza, T. Morimoto, J. E. Moore, and J. B. Neaton, Large bulk photovoltaic effect and spontaneous polarization of single-layer monochalcogenides, Phys. Rev. Lett. 119, 067402 (2017).DOI
- [19]H.-C. Zhou, J. R. Long, and O. M. Yaghi, Introduction to metal-organic frameworks, Chemical Reviews 112, 673 (2012).DOI
- [20]H. Furukawa, K. E. Cordova, M. O’Keeffe, and O. M. Yaghi, The chemistry and applications of metal-organic frameworks, Science 341, 1230444 (2013).DOI
- [21]W. Jiang, X. Ni, and F. Liu, Exotic topological bands and quantum states in metal-organic and covalent-organic frameworks, Accounts of Chemical Research 54, 416 (2021).DOI
- [22]Z. Wang, Z. Liu, and F. Liu, Organic topological insulators in organometallic lattices, Nature Communications 4, 1471 (2013).DOI
- [23]Z. F. Wang, Z. Liu, and F. Liu, Quantum anomalous hall effect in 2d organic topological insulators, Phys. Rev. Lett. 110, 196801 (2013).DOI
- [24]Z. Wang, N. Su, and F. Liu, Prediction of a two-dimensional organic topological insulator, Nano Letters 13, 2842 (2013).
- [25]T. Hu, W. Zhong, T. Zhang, W. Wang, Z. F. Wang, et al., Identifying topological corner states in two-dimensional metal-organic frameworks, Nature Communications 14, 7092 (2023).
- [26]P. Tin, M. J. Jenkins, J. Xing, N. Caci, Z. Gai, R. Jin, S. Wessel, J. Krzystek, C. Li, L. L. Daemen, Y. Cheng, and Z.-L. Xue, Haldane topological spin-1 chains in a planar metal-organic framework, Nature Communications 14, 5454 (2023).DOI
- [27]M. Fuchs, P. Liu, T. Schwemmer, G. Sangiovanni, R. Thomale, C. Franchini, and D. Di Sante, Kagome metal-organic frameworks as a platform for strongly correlated electrons, Journal of Physics: Materials 3, 025001 (2020).
- [28]L. Z. Zhang, Z. F. Wang, B. Huang, B. Cui, Z. Wang, S. X. Du, H.-J. Gao, and F. Liu, Intrinsic two-dimensional organic topological insulators in metal-dicyanoanthracene lattices, Nano Letters 16, 2072 (2016).
- [29]A. Kumar, K. Banerjee, A. S. Foster, and P. Liljeroth, Two-dimensional band structure in honeycomb metal-organic frameworks, Nano Letters 18, 5596 (2018).DOI
- [30]Z. Wang, Z. Liu, and F. Liu, Quantum anomalous hall effect in 2d organic topological insulators, Physical Review Letters 110, 196801 (2013).DOI
- [31]A. Bandyopadhyay, A. Majumdar, S. Chowdhury, R. Ahuja, and D. Jana, 8-16-4 graphene: Square-lattice two-dimensional nodal line semimetal with a nontrivial topological Zak index, Physical Review B 103, 075137 (2021).
- [32]A. Bandyopadhyay and D. Jana, A review on role of tetra-rings in graphene systems and their possible applications, Reports on Progress in Physics 83, 056501 (2020).DOI
- [33]A. Banerjee, A. Bandyopadhyay, R. Sarkar, and A. Narayan, Non-hermitian topology and flat bands via an exact real-space decimation scheme, Physical Review B 110, 085431 (2024).arxiv.org/abs/2310.04834
- [34]A. Bose, A. Bandyopadhyay, and A. Narayan, Origin of flat bands and non-trivial topology in coupled kagome lattices, Communications Physics 8, 519 (2025).arxiv.org/abs/2310.18276
- [35]D. Kumar, J. Hellerstedt, B. Field, B. Lowe, Y. Yin, N. V. Medhekar, and A. Schiffrin, Manifestation of strongly correlated electrons in a 2d kagome metal-organic framework, Advanced Functional Materials 31, 206474 (2021).DOI
- [36]J. Zhang, A. Shchyrba, S. Nowakowska, E. Meyer, T. A. Jung, and M. Muntwiler, Probing the spatial and momentum distribution of confined surface states in a metal coordination network, Chemical Communications 50, 12289 (2014).DOI
- [37]L. Hernández-López, I. Piquero-Zulaica, C. A. Downing, M. Piantek, J. Fujii, D. Serrate, J. E. Ortega, F. Bartolomé, and J. Lobo-Checa, Searching for kagome multi-bands and edge states in a predicted organic topological insulator, Nanoscale 13, 5216 (2021).
- [38]L. Yan, O. J. Silveira, B. Alldritt, S. Kezilebieke, A. S. Foster, and P. Liljeroth, Two-dimensional metal–organic framework on superconducting nbse2, ACS Nano 15, 17813 (2021).DOI
- [39]L. Yan, O. J. Silveira, B. Alldritt, O. Krejčí, A. S. Foster, and P. Liljeroth, Synthesis and local probe gating of a monolayer metal–organic framework, Advanced Functional Materials 31, 2100519 (2021).DOI
- [40]L. Z. Zhang, Z. Fang, W. Yang, B. Huang, B. Cui, Z. Wang, S. X. Du, H.-J. Gao, and F. Liu, Intrinsic two-dimensional organic topological insulators in metal–dicyanoanthracene lattices, Nano Letters 16, 2072 (2016).
- [41]J.-S. You, S. Fang, S.-Y. Xu, E. Kaxiras, and T. Low, Berry curvature dipole current in the absence of inversion metal dichalcogenides family, Phys. Rev. B 98, 121109 (2018).DOI
- [42]R. Battilomo, N. Scopigno, and C. Ortix, Berry curvature dipole in strained graphene: A fermi surface warping effect, Phys. Rev. Lett. 123, 196403 (2019).DOI
- [43]T. Low, Y. Jiang, and F. Guinea, Topological currents in black phosphorus with broken inversion symmetry, Phys. Rev. B 92, 235447 (2015).DOI
- [44]Y. Zhao, J. Cao, Z. Zhang, S. Li, Y. Li, F. Ma, and S. A. Yang, Berry curvature dipole and nonlinear hall effect in two-dimensional nb₂n₊₁siₙ₄ₙ₊₂, Phys. Rev. B 107, 205124 (2023).
- [45]A. Bandyopadhyay, N. B. Joseph, and A. Narayan, Electrically switchable giant berry curvature dipole in silicene, germanene and stanene, 2D Materials 9, 035013 (2022).DOI
- [46]B. Cirera, A. Sánchez-Grande, B. De la Torre, J. Santos, S. Edalatmanesh, E. Rodríguez-Sánchez, K. Lauwaet, B. Mallada, R. Zbořil, R. Miranda, et al., Tailoring topological order and π-conjugation to engineer quasi-metallic polymers, Nature nanotechnology 15, 437 (2020).DOI
- [47]S. Kawai, O. Krejci, A. S. Foster, R. Pawlak, F. Xu, L. Peng, A. Orita, and E. Meyer, Diacetylene linked anthracene oligomers synthesized by one-shot homocoupling of trimethylsilyl on cu(111), ACS Nano 12, 8791 (2018).DOI
- [48]L. Wei, X. Zhang, and M. Zhao, Spin-polarized dirac cones and topological nontriviality in a metal–organic framework ni₂c₂₄se₆h₁₂, Physical Chemistry Chemical Physics 18, 8059 (2016).DOI
- [49]Y. Yan, F. Liu, W. Tang, H. X. Wong, B. Qie, S. G. Louie, and F. R. Fischer, Engineering phase-frustration-induced flat bands in an aza-triangulene covalent kagome lattice, Nature Materials 1, 1 (2026).DOI
- [50]L. Yang, J. Dong, Z. Wang, D. Li, C. Chen, B. Huang, D. Liu, and B. Cui, Breathing-controlled pure orbital and nonlinear hall effects in 2d organic kagome frameworks, Nano Letters 26, 1455 (2026).DOI
- [51]J.-J. Adizian, P. Briddon, B. Humbert, J.-L. Duvail, P. Wagner, C. Adda, and C. Ewels, Dirac cones in two-dimensional conjugated polymer networks, Nature Communications 5, 5842 (2014).
- [52]A. A. Soluyanov and D. Vanderbilt, Computing topological invariants without inversion symmetry, Phys. Rev. B 83, 235401 (2011).DOI
- [53]R. Yu, X. L. Qi, A. Bernevig, Z. Fang, and X. Dai, Equivalent expression of z₂ topological invariant for band insulators using the non-abelian berry connection, Phys. Rev. B 84, 075119 (2011).DOI
- [54]P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, M. Cococcioni, I. Dabo, et al., Quantum espresso: a modular and open-source software project for quantum simulations of materials, Journal of Physics: Condensed Matter 21, 395502 (2009).DOI
- [55]P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. B. Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, I. Dabo, A. Dal Corso, S. de Gironcoli, et al., Advanced capabilities for materials modelling with Quantum ESPRESSO, Journal of Physics: Condensed Matter 29, 465901 (2017).
- [56]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized gradient approximation made simple, Physical Review Letters 77, 3865 (1996).pubmed.ncbi.nlm.nih.gov/10062328
- [57]P. E. Blöchl, Projector augmented-wave method, Physical Review B 50, 17953 (1994).pubmed.ncbi.nlm.nih.gov/9976227
- [58]H. J. Monkhorst and J. D. Pack, Special points for brillouin-zone integrations, Physical Review B 13, 5188 (1976).DOI
- [59]S. S. Tsirkin, High performance wannier interpolation of berry curvature and related quantities with wannierberry code, npj Computational Materials 7, 33 (2021).
- [60]S. Coh and D. Vanderbilt, Python tight binding (pytb) (2022).