betaFeedback

WorksPhysics and Astronomy

A magnetic domain wall Mackey-Glass oscillator

Abstract

We propose a time-delay oscillator with Mackey-Glass nonlinearity based on a pinned magnetic domain wall in a thin film nanostrip. Through spin transfer torques, electric currents applied along the strip cause the domain wall to deform and displace away from a geometrical pinning site, which can be converted into a nonlinear transfer function through a suitable choice of a readout. This readout serves as a delay signal, which is subsequently fed back into the applied current with amplification. With micromagnetics simulations, we study the role of the readout position, time delay, and feedback gain on the dynamics of this domain wall. In particular, we highlight regimes in which self-sustained oscillations and complex transients are possible.

Magnetic domain walls in thin films possess a number of useful properties for information technologies. Domain walls are topological solitons whose spatial profile is determined by competing exchange interactions and anisotropies, which confer them particle-like properties that make them useful for binary storage or logic gates. For example, the possibility to move sequences of domain walls back and forth under applied currents1–5 allows for information to be shuttled back and forth in magnetic shift registers6. Domain wall devices have been touted as a promising avenue to reduce the energy consumption in information technologies.

Beyond applications in storage and logic, attention in spintronics has recently turned towards other forms of non-Boolean information processing such as neuro-inspired computing. Such efforts are motivated by the goal of identifying ways to mimic the capacity of the human brain to efficiently perform cognitive tasks, such as pattern recognition, with noisy or incomplete data. The inherent nonlinearity in magnetization dynamics is useful in this respect, since neuronal dynamics exhibit complex transients, self-oscillations, and chaotic behavior. For example, it has been shown recently that spin-torque nano-oscillators can be used for classification tasks7–9.

Here, we examine a feature of neuronal dynamics that has been explored sporadically in spintronics, namely that of magnetization dynamics with delayed feedback effects. In general terms, this entails feeding the output of the dynamical system, after amplification and a time delay, back into its input as an additional component of the external drive (e.g., fields or currents). Delayed feedback has been explored in terms of self-injection in spin-torque nano-oscillators, where their sensitivity to external perturbations10 and changes to characteristics such as the spectral linewidth have been examined[14, 15, 16] [11, 12, 13]. Feedback in low-dimensional systems such as approximation models can result, for example, in nontrivial behavior such as temporal chaos[17, 18]. In other systems, the onset of self-sustained oscillations can appear through a variety of different feedback mechanisms[19, 20, 21]. More broadly, delayed-feedback has been employed in nonlinear elements as building blocks of time-delay architecture for reservoir computing[22, 23], a neuro-inspired scheme that has garnered growing interest in magnetism and spintronics[24, 25, 26, 27, 28, 29, 30] [9].

A prototypical example of delayed feedback dynamics is the Mackey-Glass oscillator, which is described by the one-dimensional delay differential equation[31],

x˙(t)=−Γx(t)+Cx(t−τ)1+x(t−τ)p.(1)\dot{x}(t) = -\Gamma x(t) + \frac{Cx(t-\tau)}{1+x(t-\tau)^p}. \tag*{(1)}

The right-hand side of the equation comprises two terms. The first represents damping with a relaxation rate Γ\Gamma. The second is the delayed feedback term, where CC is an amplification, and pp determines the nonlinearity of the transfer function. Depending on the values of Γ\Gamma, CC, and pp, the system in Eq. (1) can exhibit complex transients, self-oscillations, and chaos. In the absence of delayed feedback, Eq. (1) exhibits only trivial relaxation dynamics. Optoelectronic schemes exploiting the kind of Mackey-Glass nonlinearity in Eq. (1) have been recently used in time-delay architectures for reservoir computing[22, 23]. In the context of neuro-inspired information processing, it is, therefore, interesting to enquire how similar implementations could be realized using magnetic states and spintronic systems.

Our proposal for a domain wall Mackey-Glass oscillator (DWMGO) is presented in Figure 1. The system comprises an in-plane magnetized ferromagnetic strip with an elliptical protrusion, which acts as a strong pinning site for a transverse domain wall, similar to a magnetic racetrack memory6. An electric current is applied along xx, the long axis of the strip, which simultaneously leads to a displacement and a distortion of the domain wall along this direction. A magnetoresistive readout sensor is positioned next to the protrusion, which is sensitive to the yy component of the magnetization. The signal from this readout, which represents the spatial average across the sensor at position ii, ⟨my(t)⟩i\langle m_y(t)\rangle_i, is amplified by a factor GG with a time delay τ\tau and subsequently fed back into the input as an additional time-dependent current, δJ(t)\delta J(t). The current-driven domain wall dynamics is then subjected to the time-dependent drive,

Image not extracted

Figure 1. Geometry of the domain wall Mackey-Glass oscillator. The magnetic strip, 200 nm in width, hosts an in-plane magnetized transverse domain wall, which is pinned by an elliptical protrusion of width 100 nm. A dc conventional current J0J_0 flows along the track and displaces the wall through spin-transfer torques. A magnetoresistance readout sensor detects the ⟨my⟩\langle m_y\rangle component near the protrusion, which is amplified by a factor GG and fed back into the input current as a delayed modulation.

J(t)=J0+Gai⟨my(t−τ)⟩i,(2)J(t) = J_0 + G a_i \langle m_y(t-\tau)\rangle_i, \tag*{(2)}

where aia_i is a normalization constant discussed below. The dynamics of the DWMGO is simulated using the MuMax3 code[32], which performs a numerical time integration of the Landau-Lifshitz equation with current-induced spin torques,

dmdt=−γ0m×Heff+αm×dmdt−(u⋅∇)m+βm×(u⋅∇)m.(3)\frac{d\mathbf{m}}{dt}=-\gamma_0\mathbf{m}\times\mathbf{H}_{\mathrm{eff}}+\alpha\mathbf{m}\times\frac{d\mathbf{m}}{dt}-(\mathbf{u}\cdot\nabla)\mathbf{m}+\beta\mathbf{m}\times(\mathbf{u}\cdot\nabla)\mathbf{m}. \tag*{(3)}

γ0\gamma_0 is the gyromagnetic ratio, m(r,t)\mathbf{m}(\mathbf{r},t) is a unit vector representing the magnetization field, Heff\mathbf{H}_{\mathrm{eff}} is the effective magnetic field, and α\alpha is the Gilbert damping constant. The Zhang-Li spin transfer torques are parametrized by u=J(r)PμB/(eMs)\mathbf{u}=\mathbf{J}(\mathbf{r})P\mu_{\mathrm{B}}/(eM_{\mathrm{s}}), which represents an effective spin drift velocity where J\mathbf{J} is the conventional current density, μB\mu_{\mathrm{B}} is the Bohr magneton, ee is the electron charge, β\beta is the nonadiabaticity, and PP is the spin polarization. The effective field is given by the variational derivative of the total magnetic energy UU with respect to the magnetization unit vector, Heff=−(1/μ0Ms)δU/δm\mathbf{H}_{\mathrm{eff}}=-(1/\mu_0M_{\mathrm{s}})\delta U/\delta\mathbf{m}, and comprises contributions from the exchange, dipole-dipole, and the Zeeman interactions.

The oscillator studied comprises a strip with dimensions of 3072 × 200 × 10 nm, which is discretized using finite difference cells 3 × 3 × 10 nm in size. The protrusion is taken to be a half ellipse with the long axis perpendicular to the wire, which extends out to a distance of 92 nm from the wire, and the short axis parallel to the wire with an extension of 100 nm. We assume micromagnetic parameters relevant for permalloy, namely a saturation magnetization of Ms=860M_{\mathrm{s}}=860 kA/m, an exchange constant of A=13A=13 pJ/m, and a Gilbert damping constant of α=0.02\alpha=0.02. The readout region is taken to be rectangular in shape with dimensions of 100×200 nm, which spans the entire with of the magnetic strip. For the current-driven spin torques, we assume P=1P=1 for simplicity and a nonadiabacity of β=0.1\beta=0.1. Finite element electromagnetics simulations were used to compute the spatial profile of the currents flowing along the wire. Current densities used here refer to the average current density applied through the rectangular cross section at the ends of the wire, far from the protrusion. In Figure 2, the static domain wall profile under different applied dc currents is shown.

Image not extracted

Figure 2. Static domain wall profiles under different applied dc currents, J(t)=J0J(t)=J_0. (a) J0=−4J_0=-4, (b) J0=0J_0=0, (c) J0=4J_0=4, (d) J0=8J_0=8, and (e) J0=10J_0=10 TA/m2^2. The critical depinning current is approximately J0,c=8.5J_{0,c}=8.5 TA/m2^2. The functionality of the DWMGO is limited to currents below this critical current.

The magnetoresistive signal, which serves as the transfer

function ff [i.e., the second term on the right hand side of Eq. (1)], is illustrated in Figure 3. The signal is computed from the spatial average of the magnetization component mym_y within the sensor region. Six different positions of the sensor are shown, which results in different asymmetries and nonlinearities for the transfer function [Figure 3(a)]. To facilitate comparison between the different sensor positions, we rescale the transfer functions in the following way. First, we normalize each curve by a factor aia_i such that the maximum value of the output is unity; we define the transfer function to be fDW=ai⟨my⟩if_{\mathrm{DW}}=a_i\langle m_y\rangle_i. Second, we define an operating point J0,i∗J^{*}_{0,i} such that the value of the transfer function is 0.5 at J0−J0,i∗=0J_0-J^{*}_{0,i}=0. The values of aa and J0J_0 for each sensor position is given in Table I. The transfer function for positions 1 to 3 is shown in Figure 3(b). For the purposes of comparison, the transfer function for the Mackey-Glass oscillator [Eq. (1)] is shown in Figure 3(c) for three values of the nonlinearity, pp. fDWf_{\mathrm{DW}} captures the nonmonotonic behavior of the Mackey-Glass transfer function for p>1p>1, with the sensor position offering a means to adapt the nonlinearity.

Image not extracted

Figure 3. Magnetoresistive readout signal of the DWMGO. (a) Example of six sensor positions. (b) Spatial average of mym_y as a function of the static applied current J0J_0 for each sensor position in (a). (c) Rescaled output function at the operating point of sensor positions 1 to 3. (d) Mackey-Glass transfer function for three different pp for comparison.

Position, iiaia_iJ0,i∗J^{*}_{0,i} (TA/m2^2)
11.145−4.12-4.12
21.201−0.68-0.68
31.3070.42
41.3662.20
51.4134.38
61.3666.24

Table I. Scaling parameter aia_i and operating point J0,i∗J^{*}_{0,i} for each sensor position ii such that fDW=0.5f_{\mathrm{DW}}=0.5 at J0=J0,i∗J_0=J^{*}_{0,i}.

Next, we discuss the possible dynamical states of the DWMGO and the influence of the sensor position. Simulations with the delayed feedback are performed as follows. For a given value of τ\tau under study, time integration of Eq. (3) is first performed over the interval t∈[−τ,0]t\in[-\tau,0] without the feedback term in order to generate the delay term ⟨my(t−τ)⟩\langle m_y(t-\tau)\rangle, which is stored in memory. Since we employ a time integration algorithm with an adaptive time step (i.e., primarily the Dormand-Prince method implemented in MuMax3[32]), we use cubic interpolation for the function my(t−τ)m_y(t-\tau) so that it can be evaluated at arbitrary values of t−τt-\tau during the simulation. During this initial phase without feedback, a static current J0=J0∗J_0=J^{*}_0 is applied. The initial magnetization state is computed previously for this operating point in order to minimize transient dynamics. For t>0t>0, Eq. (3) is solved together self-consistently with Eq. (2).

Some examples of the domain wall dynamics are shown in Figure 4. The figure shows the simulated magnetoresistance readout for a sensor in position 2. It is instructive to first consider the effect of long delays (τ=10\tau=10 ns). At low gain, G=2G=2, the feedback acts like a driving term formed by a sequence of steps, where each step corresponds to a different equilibrium position of the domain wall [Figure 4(a)]. As the step is initially applied, a ringdown of the signal can be seen over a few ns, which corresponds to the damped oscillatory motion of the domain wall about the new equilibrium state. Since fDWf_{\mathrm{DW}} is designed to be finite at J0=J0∗J_0=J^{*}_0, the application of the feedback guarantees some transient behavior since JJ will deviate from J0∗J^{*}_0 instantaneously. The stepped ringdown response eventually converges to a steady state value. At higher gain, G=6G=6, the initial stepped response comprises larger ampli-

Image not extracted

Figure 4. Time traces of the magnetization dynamics measured at Position 2. (a) Transient dynamics toward a static configuration under weak amplification, G=2G=2, and long delays, τ=10\tau=10 ns. (b) Self-sustained oscillations at G=6G=6 and long delays, τ=10\tau=10 ns. (c) Self-sustained oscillations at G=6G=6 and short delays, τ=1\tau=1 ns.

tude motion, which over the course of a few hundred ns results in a steady state oscillation of the domain wall, as shown in Figure 4(b). The initial phase is dominated by transients on a time scale give by τ\tau, but this gradually evolves into a self-oscillatory mode for which this modulation is less present. At short delays (τ=1\tau=1 ns), the transient dynamics toward the self-oscillation is considerably shorter, which can be observed in Figure 4(c).

Examples of the resulting power spectrum of feedback-driven oscillations are presented in Figure 5. The spectra in Figure 5(a) and 5(b) correspond to the oscillations shown in Figure 4(c) and 4(b), respectively. Figure 5(a) presents an example at short delays (τ=1\tau=1 ns), where we can clearly identify the main oscillation peak f0f_0 at around 1.13 GHz, with harmonics at 2f02f_0 and 3f03f_0 also visible in the spectrum shown. These main spectral lines are accompanied by a number of modulation

Image not extracted

Figure 5. Power spectral density (PSD) of domain wall oscillations corresponding to readout at Position 2 with G=6G=6 and two different delays: (a) τ=1\tau=1 ns and (b) τ=10\tau=10 ns.

sidebands, which result from a self-modulation that is induced by the delayed feedback signal. This is a feature seen in other delayed-feedback systems involving spintronic devices[14, 15, 16].

Figure 6 presents a color map of the power spectral density of the DWMGO as a function of time delay at a fixed gain of G=6G = 6, for three sensor positions. For all cases shown, we can observe the primary oscillation peak around 1 GHz, where the strength and number of modulation sidebands vary with the delay. For short delays, the feedback results only in a modulation of the primary oscillation frequency, where a ratchet-like frequency pulling toward lower frequencies is shown as τ\tau increases. This phenomenon is particularly visible in Figure 6(c). For longer delays, this frequency pulling is accompanied by the appearance of modulation sidebands, which are also visible in the harmonics within the frequency window considered. The onset of these sidebands depend strongly on the sensor position, and therefore, on the feedback nonlinearity. We can see that the sidebands appear at τ≃1.5\tau\simeq1.5 ns for a sensor centered at the protrusion (position 1), while at positions 2 and 3 the onset of the sidebands occur at τ≃4.0\tau\simeq4.0 and τ≃4.5\tau\simeq4.5 ns, respectively. These results show that the rich power spectra can be obtained within a single device by tuning the readout position of the domain wall oscillations.

Figure 6. Color map of the power spectral density (PSD) as a function of delay τ\tau for G=6G = 6, with the sensor at (a) position 1, (b) position 2, (c) position 3.

Figure 7 presents the output power of the DWMGO for different values of the delay time and amplification with the three sensor positions considered in Figure 6. Similarly to behavior in Figure 6, we can observe modulations in the output power as the delay is varied. Another notable feature is that a maximum in the oscillator power is observed over a range of feedback gain, which can be clearly seen in Figure 7(c). This reflects the fact that the oscillatory properties are strongly dependent on the competition between the relaxation dynamics of the confining potential and the form of the feedback signal.

Figure 7. Phase diagram of the output power of the oscillator as a function of feedback delay, τ\tau, and gain, GG, for the readout sensor located at (a) position 1, (b) position 2, and (c) position 3.

We now discuss two possible issues and their potential impact on the DWMGO functionality described so far. The first concerns the Joule heating related to the current flow in the device. Because the current densities involved are typical for

spin-transfer torques, i.e., in the range of 101210^{12} A/m2^2, we can expect the operating temperature of the device to be significantly above ambient conditions. However, since the cross-sectional area at the protrusion is larger than the straight portion of the wire, we do not expect additional complications due to Joule heating near the protrusion or the sensor region, where heating might actually be lower than the baseline value set by the regions far from the protrusion. In terms of thermal noise in the readout, we do not expect any additional issues beyond those faced in designing suitable magnetoresistive readouts, e.g., in three-terminal devices studied in spin-orbit torque switching. The second issue concerns the accuracy of the sensor position, where the vagaries of nanofabrication can also result in variations in its size and shape. Our simulation results using different sensor positions show that the qualitative features of the oscillator remain present irrespective of the sensor position. In a given experimental device, there remain other control parameters such as the feedback delay, feedback gain, and the dc current used as the operating point to tailor the desired oscillations. Shifts in the sensor position away from the position, as shown in Figure 3, result in an overall translation of the nonlinear transfer function along the dc current axis [Fig. 3(b)], so variations in the sensor position due to fabrication can be accommodated by tuning this operating point.

In summary, we have presented a model for a spintronic feedback oscillator with a Mackey-Glass nonlinearity. In contrast to conventional spin-torque nano-oscillators in which nonlinearities are determined by intrinsic micromagnetic energies such as shape anisotropies or spin wave interactions, here the form of the nonlinearity is determined in large part by the position of the readout sensor and on how the pinned domain wall deforms as a function of the applied current. This suggests that multiple nonlinearities, and possibly different functionalities, could be designed on a single device by using different readout sensors.

Acknowledgments

This work was supported by the Agence Nationale de la Recherche (France) under contracts no. ANR-14-CE26-0021 (MEMOS) and ANR-17-CE24-0008 (CHIPMuNCS).

Data availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.

References

  1. [14]teger, Fractional, and Sideband Injection Locking of a Spintronic Feedback Nano-Oscillator to a Microwave Signal,” Physical Review Applied 8, 064011 (2017).DOI
  2. [15]H. Singh, A. Bose, S. Bhuktare, A. Fukushima, K. Yakushiji, S. Yuasa, H. Kubota, and A. A. Tulapurkar, “Self-Injection Locking of a Spin Torque Nano-Oscillator to Magnetic Field Feedback,” Physical Review Applied 10, 024001 (2018).DOI
  3. [16]J. Williame and J.-V. Kim, “Effects of delayed feedback on the power spectrum of spin-torque nano-oscillators,” Journal of Physics D: Applied Physics 53, 495001 (2020).
  4. [17]J. Williame, A. Difini Accioly, D. Rontani, M. Sciamanna, and J.-V. Kim, “Chaotic dynamics in a macroscopic spin-torque nano-oscillator with delayed feedback,” Applied Physics Letters 114, 232405 (2019).
  5. [18]N. Taniguchi, N. Akashi, H. Notsu, M. Kimura, H. Tsukahara, and K. Nakajima, “Chaos in nanomagnet via feedback current,” Physical Review B 100, 174425 (2019).DOI
  6. [19]D. Dixit, K. Konishi, C. V. Tomy, Y. Suzuki, and A. A. Tulapurkar, “Spin-torque oscillator based on magnetic field feedback,” Applied Physics Letters 101, 122410 (2012).
  7. [20]D. Kumar, K. Konishi, N. Kumar, S. Miwa, A. Fukushima, K. Yakushiji, S. Yuasa, H. Kubota, C. V. Tomy, A. Prabhakar, Y. Suzuki, and A. Tulapurkar, “Coherent microwave generation by spintronic feedback oscillator,” Scientific Reports 6, 30747 (2016).DOI
  8. [21]S. Bhuktare, H. Singh, A. Bose, and A. A. Tulapurkar, “Spintronic Oscillator Based on Spin-Current Feedback Using the Spin Hall Effect,” Physical Review Applied 7, 014022 (2017).DOI
  9. [22]L. Appeltant, M. C. Soriano, G. Van der Sande, J. Danckaert, S. Massar, J. Dambre, B. Schrauwen, C. R. Mirasso, and I. Fischer, “Information processing using a single dynamical node as complex system,” Nature Communications 2, 468 (2011).
  10. [23]L. Langer, A. Baylón-Fuentes, R. Martenhingi, V. S. Udaltsov, Y. K. Chembo, and M. Jacquot, “High-Speed Photonic Reservoir Computing Using a Time-Delay-Based Architecture: Million Words per Second Classification,” Physical Review X 7, 011015 (2017).
  11. [24]G. Bourianoff, D. Pinna, M. Sitte, and K. Everschor-Sitte, “Potential implementation of reservoir computing models based on magnetic skyrmions,” AIP Advances 8, 055602 (2018).DOI
  12. [25]D. Pychynenko, M. Sitte, K. Litzius, B. Krüger, G. Bourianoff, M. Kläui, J. Sinova, and K. Everschor-Sitte, “Magnetic Skyrmion as a Nonlinear Resistive Element: A Potential Building Block for Reservoir Computing,” Physical Review Applied 9, 014034 (2018).
  13. [26]R. Nakane, G. Tanaka, and A. Hirose, “Reservoir Computing With Spin Waves Excited in a Garnet Film,” IEEE Access 6, 4462–4469 (2018).DOI
  14. [27]D. Marković, N. Leroux, M. Riou, F. A. Araujo, J. Torrejón, D. Querlioz, A. Fukushima, S. Yuasa, J. Trastoy, P. Bortolotti, and J. Grollier, “Reservoir computing with the frequency, phase, and amplitude of spin-torque nano-oscillators,” Applied Physics Letters 114, 012409 (2019).DOI
  15. [28]F. A. Araujo, M. Riou, J. Torrejón, S. Tsunegi, D. Querlioz, K. Yakushiji, A. Fukushima, H. Kubota, S. Yuasa, M. D. Stiles, and J. Grollier, “Role of non-linear data processing on speech recognition task in the framework of reservoir computing,” Scientific Reports 10, 328 (2020).
  16. [29]T. Yamaguchi, N. Akashi, S. Tsunegi, H. Kubota, K. Nakajima, and T. Taniguchi, “Periodic structure of memory function in spintronics reservoir with feedback current,” Physical Review Research 2, 023389 (2020).DOI
  17. [30]D. Pinna, G. Bourianoff, and K. Everschor-Sitte, “Reservoir Computing with Random Skyrmion Textures,” Physical Review Applied 14, 054020 (2020).DOI
  18. [31]M. C. Mackey and L. Glass, “Oscillation and chaos in physiological control systems,” Science 197, 287–289 (1977).pubmed.ncbi.nlm.nih.gov/267326
  19. [32]A. Vansteenkiste, J. Leliaert, M. Dvornik, M. Helsen, F. García-Sánchez, and B. Van Waeyenberge, “The design and verification of MuMax3,” AIP Advances 4, 107133 (2014).

Paper details

vlnc:W_d5vkkszq
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents