betaFeedback

WorksPhysics and Astronomy

Revealing the origin of ionic conduction in silver-iodide-doped silver phosphate glass

Abstract

Fast ionic transport is a defining feature of many solid electrolytes, yet its microscopic origin is not fully understood. In the absence of microscopic insights, the development of next-generation solid-state batteries remains largely empirical. Most existing measurements access either the low-frequency transport response or the high-frequency bound polarization, yet the intermediate mesoscopic frequency regime is where ionic transport emerges. By varying the AgI\mathrm{AgI} concentration (xx) and performing time-domain terahertz spectroscopy (TDTS) in a prototypical glassy electrolyte (AgI)x(AgPO3)(1−x)\left(\mathrm{AgI}\right)_{x}\left(\mathrm{AgPO_3}\right)_{(1-x)}, we reveal this intermediate frequency regime and identify a crossover from bound-current-dominated conduction to conductivity arising from short-range dispersive ionic transport. We find that bound polarization associated with the bond-bending motion of the P−O−−Ag+\mathrm{P{-}O^- -Ag^+} motif is present across compositions but is insufficient to produce ionic transport on its own. Transport emerges only when this polarization is embedded in a sufficiently soft AgPO3\mathrm{AgPO_3} glassy matrix and accompanied by a high carrier density. These ingredients together take the system from a vibrationally bound response to short-range dispersive motion.

In solid electrolytes, charge is carried by mobile ions embedded in a host network rather than via free electrons [1, 2]. Thus, carrying an ionic current requires a rearrangement of the material itself. This motion spans a broad hierarchy of timescales, from DC transport which is indicative of long-range diffusion to high-frequency dynamics associated with the vibrational modes of the network [3, 4, 5, 6]. While there must be a crossover between these two dynamical limits, how exactly the localized, vibration-dominated response becomes long-range diffusive transport remains unresolved [6, 7, 8].

As candidates for solid-state batteries, solid electrolytes promise improved safety, mechanical stability, and energy density compared to liquid lithium-ion batteries [9]. Realizing that promise, however, depends on achieving high ionic conductivity in a solid, and thus requires resolving the emergence of diffusive transport.

Solid electrolytes can have radically different chemistry, structure, and proposed transport mechanisms, ranging from vacancy hopping to motion between localized sites to coordination changes. Descriptions of ionic conduction often share a common tendency to treat the host as static and the ions as the main actors [9, 10]. However, the static-host picture cannot fully explain the necessary ingredients for strong ionic conductivity. Within the past year, simulations spanning diverse material classes suggest that vibrational modes facilitate ionic transport [11, 12, 13, 14, 15]. Recent experiments have likewise associated the activation of soft modes with enhanced conductivity in the well-known crystalline ionic conductors Li7_7La3_3Zr2_2O12_{12} and Li10.5_{10.5}La0.5_{0.5}TiO3_3 [16, 17]. Meanwhile, other THz-scale studies in single- and polycrystalline fluoride oxides reported similar crossover-like behavior, but

interpreted that response primarily in terms of ion dynamics rather than an active role of the host lattice [10]. This convergence across distinct material classes points to a broader principle in which the host structure is an active participant in the emergence of ionic transport, rather than a static backdrop.

The prototypical glassy fast-ion conductor (AgI)x(AgPO3)1−x(\mathrm{AgI})_x(\mathrm{AgPO}_3)_{1-x} provides a particularly useful platform for testing this hypothesis [18, 19, 20, 21, 22]. Here, mobile charge carriers are supplied by the AgI dopant, while the structural framework is provided by the amorphous AgPO3_3 host matrix. This glassy network exhibits low-frequency vibrational modes—the so-called boson peak [23]—centered near 0.6 THz [22, 24, 25]. Although these modes have long been hypothesized to influence ionic transport [10, 26, 27, 28], their role in the current response has not been directly measured. Combined with the absence of grain boundaries, the presence of a single mobile ionic species, and the ability to systematically vary dopant concentration, (AgI)x(AgPO3)1−x(\mathrm{AgI})_x(\mathrm{AgPO}_3)_{1-x} provides a model system for isolating the essential ingredients of ionic motion in a solid.

Experimentally, ionic motion has largely been accessed through two classes of measurements [29, 30]. In the low-frequency limit, measurements emphasize ionic transport in the free conductivity, Jfree\mathbf{J}_{\mathrm{free}}, as seen in Refs. [5, 31, 32, 33]. At high frequencies, the vibrational response of the lattice or host matrix gives rise to a time-dependent polarization P\mathbf{P}, whose dynamics constitute a bound current. Measurements relying on the bound current are shown for example in Refs. [22, 24, 34]. Electrodynamically, both terms participate in the total current Jtot\mathbf{J}_{\mathrm{tot}}, such that Jtot=Jfree+∂P∂t\mathbf{J}_{\mathrm{tot}} = \mathbf{J}_{\mathrm{free}} + \frac{\partial\mathbf{P}}{\partial t} [35]. However, because these experimental approaches operate in widely separated frequency regimes, it has historically been difficult to establish how structural dynamics manifest in the current response, or how they give rise to transport-like behavior. At low frequencies the bound current is small, while at sufficiently high frequencies the free current becomes small. Between these limits, neither contribution can be ignored and the bound current may therefore play a defining role by shaping the electrodynamic environment governing the emergence of ionic transport. Resolving this intermediate regime requires an experimental approach that directly probes the total current response on the intrinsic timescale of ionic motion, where polarization and transport contributions coexist. This mesoscopic regime lies in the terahertz (THz) frequency range, making it a natural window in which to examine how vibrational dynamics and transport-like response become intertwined in disordered ionic systems.

In this work, we use time-domain terahertz spectroscopy (TDTS) to probe AgI-AgPO3 across the relevant microscopic timescales for the first time. We directly observe a crossover between dispersive hopping and vibrational dynamics, but only at high AgI concentrations, where the phosphate backbone becomes sufficiently flexible [22, 36, 37] and the carrier density is high enough to support fast motion. Our results show that the AgPO3 network is an active contributor to ionic motion rather than a passive spectator. These distinct pathways are summarized schematically in Figure 1. Ionic transport (Figure 1) arises when vibrations of the mechanically softened backbone (Figure 1) drive a coupled local bound response (Figure 1) that sets mobile Ag+ ions into motion.

Coupled host and ionic dynamics in AgI-AgPO3

Figure 1. Coupled host and ionic dynamics in AgI-AgPO3. (a) Schematic of the AgPO3 glass network, with the highlighted region enlarged in (b) to show the local structure and mobile Ag+ and I− ions. (c–e) Schematic representations of the three current contributions relevant to this work: (c) bound current associated with low-frequency motion of the AgPO3 backbone, (d) bound current associated with the local pendulum-like motion of the P-O−-Ag+ motif, and (e) free current associated with ionic transport. Motion in (c–e) is illustrated by blurred copies of the equilibrium structures.

ible [22, 36, 37] and the carrier density is high enough to support fast motion. Our results show that the AgPO3 network is an active contributor to ionic motion rather than a passive spectator. These distinct pathways are summarized schematically in Figure 1. Ionic transport (Figure 1) arises when vibrations of the mechanically softened backbone (Figure 1) drive a coupled local bound response (Figure 1) that sets mobile Ag+ ions into motion.

Our measurements access the intrinsic timescales of ionic motion, providing a direct view of the microscopic processes governing ionic conduction. We find that fast ionic transport emerges only when mobile ions occupy a mechanically soft, glassy network containing a polarizable local motif. Only when all three conditions are met does the local bound response evolve into short-range dispersive ionic motion. These results in AgI-AgPO3 suggest that strong ionic conduction at nonzero frequency may therefore be understood as a property of the coupled ion-host system rather than of mobile carriers moving through a passive background, underscoring that electrolyte design must account for the electrodynamic and mechanical environment of ionic motion.

THz transmission and absorption edge

Figure 2(a) shows the time-domain THz traces for the reference measurement without the sample (gray) and for transmission through the sample at different temperatures (blue to red). Fourier transforming these traces yields the frequency-domain spectra shown in Figure 2(b), from which the THz transmission is obtained. Figure 3(a) shows the transmission magnitude as a function of temperature for a fixed AgI concentration of 20%, while Figure 3(b,c) shows the corresponding concentration dependence at fixed temperatures.

Time- and frequency-domain THz response of the 20% AgI composition at various temperatures

Figure 2. Time- and frequency-domain THz response of the 20% AgI composition at various temperatures. (a) Transmitted THz electric field as a function of time at different temperatures (blue to red), together with the reference measurement through an open aperture (gray). (b) Corresponding frequency-domain spectra obtained by Fourier transforming the time-domain traces in (a). Transmission through the sample suppresses the THz bandwidth relative to the reference.

Temperature-, frequency-, and concentration-dependent THz transmission and conductivity of AgI-AgPO3

Figure 3. Temperature-, frequency-, and concentration-dependent THz transmission and conductivity of AgI-AgPO3. (a) Magnitude of the complex THz transmission for a representative AgI concentration as a function of frequency and temperature. (b,c) THz transmission as a function of frequency and AgI concentration at fixed temperatures. (d,e) Real part of the complex conductivity, σ1(ν,T)\sigma_1(\nu,T), as a function of frequency for representative AgI concentrations at different temperatures. Dashed lines indicate powers of one-half and three. (f,g) Arrhenius representation of the conductivity for representative concentrations at selected frequencies, used to extract the activation energy Δ\Delta from the high-temperature slopes.

As shown in Figure 3(a-c), all compositions, including the undoped AgPO3 glass, exhibit a pronounced absorption edge within the THz window, well within our measurement bandwidth (Figure 2(b)). The onset frequency is determined from the intersection of the transmission with the experimental noise floor and is plotted as a function of temperature in Figure 4(a). Previous work has attributed this feature to low-frequency vibrational modes of the AgPO3 backbone [22, 38]. Upon AgI doping, the onset frequency shifts to lower values, but remains near ∼ 0.6 THz across all compositions.

THz response separates rigid and flexible elastic regimes in AgI-AgPO3

Figure 4. THz response separates rigid and flexible elastic regimes in AgI-AgPO3_{3}. Non-percolating compositions are shown with open markers, while percolating compositions, including both rigid and flexible glasses, are shown with filled markers. (a) Onset frequency of the THz absorption edge, defined as the frequency at which the transmission falls below the experimental noise floor. Vertical lines indicate the two temperatures shown in Figure 3(b,c). (b) Exponent γ\gamma extracted from fits to (1). (c) Frequency-dependent Arrhenius barriers as a function of frequency for four representative compositions; the complete concentration dependence is shown in the Supplemental Information.

THz conductivity in frequency

To characterize the frequency-dependent charge response, we extract the real part of the complex conductivity, σ1(ν,T)\sigma_1(\nu,T), from the measured THz transmission by numerically inverting the Fresnel equations [35]. This quantity contains contributions from both free and bound currents. The resulting conductivity is shown in Figure 3(d,e) as a function of temperature for different AgI concentrations. To isolate the AgI-induced response, we subtract the bound-current contribution of undoped AgPO3_3 from the higher-concentration samples. Details of the inversion and subtraction procedures are provided in the Supplemental Information.

We first analyze the frequency dependence of σ1(ν,T)\sigma_1(\nu, T) at fixed temperature. For solid electrolytes such as AgI-AgPO3_3, this frequency response is conventionally described through three dynamical regimes [30]. Across these regimes, the conductivity follows a piecewise power law consistent with the universal scaling described by Sidebottom and others [3, 4, 6, 10, 39]

σ1(ν;T)=σDC(1+(νν∗)γ),(1)\sigma_1(\nu; T) = \sigma_{DC} \left(1 + \left(\frac{\nu}{\nu^*}\right)^\gamma\right), \tag*{(1)}

where σDC\sigma_{DC} is the DC conductivity, ν∗=ν∗(T)\nu^* = \nu^*(T) is the “attempt” frequency of the conducting ion, and γ=γ(T)\gamma= \gamma(T) is the scaling exponent. At low frequencies, ions can fully follow the applied field, producing a DC conductivity plateau (γ=0\gamma= 0). In AgI-AgPO3_3, this regime occurs below tens of kHz [4, 36]. At higher frequencies, the response enters an intermediate regime dominated by short-range hopping. Here, 0<γ<10 < \gamma< 1, characteristic of the dispersive regime first described by Jonscher [3, 18]. At still higher frequencies, even short hops are suppressed, and ions undergo localized vibrations within the glassy potential landscape [4, 10, 30]. In AgI-AgPO3_3, this is expected to occur near 0.6 THz [22, 38]. Thus, extracting γ\gamma allows us to identify the dynamical regime probed by the THz response.

We next determine which compositions enter the dispersive hopping regime within the THz bandwidth. To do so, we fit the power law described by (1) to the conductivity data shown in Figure 3(d,e). In Figure 4(b), we plot the fitted exponent γ\gamma as a function of temperature and concentration. Below 200 K, all compositions exhibit γ>1\gamma> 1, consistent with a superlinear, vibration-dominated response. Above 200 K, the data separate cleanly according to elastic regime [22, 36, 38]: rigid and intermediate (“percolating”) compositions remain at γ>1\gamma> 1 across the full temperature range, while only the flexible, high-AgI glasses continue to evolve into the dispersive hopping regime. Specifically, only compositions in the flexible elastic regime (x≥37.5%x \ge37.5\%) cross from γ>1\gamma> 1 to γ<1\gamma< 1 within the THz window.

THz conductivity with temperature

Having established how the frequency dependence evolves across the different regimes, we next examine the temperature dependence at fixed frequency to identify the characteristic energy scales governing the THz response. We fit the high-temperature conductivity to an Arrhenius form [4, 10, 36, 39]

σ1(T;ν)T=Ae−Δ/kBT,(2)\sigma_1(T; \nu)T = A e^{-\Delta/ k_B T}, \tag*{(2)}

where A=A(ν)A = A(\nu) is a fitted prefactor, Δ=Δ(ν)\Delta= \Delta(\nu) is the barrier height, and kBk_B is Boltzmann’s constant. Figure 3(f,g) show the Arrhenius behavior for two representative concentrations, from which we extract the barrier height Δ\Delta using (2). The resulting activation energies are plotted as a function of frequency for four representative compositions in Figure 4(c), with additional concentrations shown in the Supplemental Information. Across the THz range, Δ\Delta is approximately 40 meV for all compositions, nearly an order of magnitude smaller than the corresponding DC transport barriers [36, 40, 41]. This reduced energy scale suggests that the THz response probes local, low-energy motion within the glassy potential landscape rather than long-range ionic transport. Approaching the absorption edge, Δ\Delta decreases further, with substantially stronger softening observed in the flexible compositions.

Implications for the origin of ionic transport

Our data demonstrate that neither a high concentration of AgI nor a flexible AgPO3_3 backbone alone can produce fast ionic transport. Instead, strong ionic conductivity emerges from the combination of a high density of mobile Ag+^+ ions and soft vibrational modes of the glassy network. This conclusion is supported by three observations from the same set of temperature-dependent measurements: (i) the selective entry of high-AgI glasses into the dispersive hopping regime within the THz window, (ii) the temperature- and concentration-dependent onset of the low-frequency backbone vibrational modes, and (iii) THz activation energies that follow the softening of the backbone rather than the DC transport barrier.

Building on earlier work that identified rigid, intermediate (“percolating”), and flexible elastic regimes in (AgI)x(AgPO3)1−x(\mathrm{AgI})_x(\mathrm{AgPO}_3)_{1-x} glasses using thermodynamic, vibrational, and DC transport measurements [22, 36, 38], we adopt this elastic classification as the organizing framework for our analysis. Here, we show that this classification does not only correlate with DC transport trends, but also determines whether vibrational dynamics can evolve into transport-like ionic motion on the THz timescale. Because THz measurements are sensitive to both bound current arising from local polarization and free current associated with transport on the intrinsic ionic timescale, they provide a direct means to disentangle the mechanisms responsible for ionic transport.

Across the different analyses in Figure 4, the data separate cleanly into rigid and flexible regimes. This separation coincides with the transition to a flexible glassy network rather than with the formation of a percolating AgI cluster. Although the AgI percolation threshold occurs near 9%, all compositions below 40% exhibit quantitatively similar behavior and remain distinct from the 40% and 50% samples. Thus, while mobile ions are necessary for ionic transport, the sharp change observed in our data is governed by the elastic state of the glassy host network.

The role of the backbone is evident in the temperature and concentration dependence of the absorption edge. Figure 4 (a) shows that this response evolves more strongly with temperature in the flexible compositions, while the presence of the absorption edge even in undoped AgPO3 demonstrates that backbone motion alone is insufficient to produce ionic transport. Consistent with this distinction, Figure 4 (b) shows that only compositions with a flexible host matrix enter the dispersive hopping regime on the THz timescale.

The interplay between these vibrational and transport responses is further revealed by the frequency-dependent activation barriers in Figure 4 (c). As the absorption edge is approached, the apparent activation barrier decreases for all compositions, but the reduction is substantially stronger in the flexible, high-AgI glasses, where it approaches zero near the edge. Below the absorption edge, the characteristic energy scale is approximately 40 meV, closely matching the energy of the P–O–Ag+\mathrm{Ag}^{+} bond-bending mode identified by Raman spectroscopy [22]. This local motion, illustrated schematically in Figure 1(d), produces a bound polarization current whose energy scale is indicated by the dotted horizontal line in Figure 4(c). The correspondence between this bound response and the reduction of the transport barrier supports a picture in which local polarization and backbone softening together facilitate ionic motion.

Taken together, these measurements show that fast ionic transport in AgI-AgPO3_{3} emerges from the coupled dynamics of mobile Ag+\mathrm{Ag}^{+} ions and the glassy host network. High carrier density alone is insufficient: transport-like motion appears only when the backbone is sufficiently flexible and the local polarization response is active. By resolving the temperature, frequency, and composition dependence of this crossover, THz spectroscopy directly accesses the intermediate dynamical regime connecting vibrationally bound response to dispersive ionic motion.

Methods

Time-domain terahertz spectroscopy (TDTS) measurements were performed using a custom-built transmission setup driven by a Yb:KGW amplifier laser (PHAROS, LIGHT CONVERSION) operating at a center wavelength of 1030 nm and a repetition rate of 50 kHz, with a pulse duration of approximately 160 fs. THz radiation was generated by optical rectification in N-benzyl-2-methyl-4-nitroaniline (BNA) and incident normally on the sample. The transmitted THz electric field was detected using electro-optic sampling in a CdTe (110) crystal [42]. A synchronized near-infrared gate pulse was spatially overlapped with the transmitted THz pulse at the electro-optic crystal, and their relative delay was controlled using a motorized delay stage. Measurements were performed in the linear-response regime using weak peak THz fields.

Seven different AgI compositions were studied: 0%, 1%, 10%, 20%, 30%, 40%, and 50%. The material was heated to above the glass transition temperature, which is AgI concentration dependent, and pressed to the desired thickness. This synthesis route has been extensively characterized across the AgI-AgPO3_{3} composition range in prior work [22, 43], including structural, thermal, and transport measurements. The transport properties measured here were consistent with these established composition-dependent trends. The material was stored in the dark in either a desiccator or a vacuum vessel since AgI-AgPO3_{3} is hygroscopic and light sensitive. To protect the integrity of the samples during testing, they were stored in a nitrogen purge box in a covered container. The samples were mounted in a Janis SHI-950 cryostat, which can reach temperatures from 4 - 400 K. Further information about time-domain THz measurements and analysis can be found in the Supplemental Information.

Data analysis was carried out in the programming language Julia [44] using the plotting library Makie [45]. The AgPO3_3 structure in Figure 1 was generated with Avogadro2 [46] and Blender [47] using the molecular structure from Ref. [48].

Acknowledgments: We thank E. Ertekin and N. Perry for useful discussions. J.F. thanks B. Shklovskii, E. D. Dahlberg, P. Crowell, R. Aquino, and J. Viñals for insightful questions. J.F. also gratefully acknowledges W. J. Meese for many valuable discussions throughout this project. This work was supported by the Illinois Materials Research Science and Engineering Center, funded by the National Science Foundation MRSEC program under NSF award number DMR-2309037. F.M. acknowledges support from the EPiQS program of the Gordon and Betty Moore Foundation, Grant GBMF11069 and NSF CAREER Award number DMR2144256. J.F. and F.M. acknowledge support from the Center for Emergent Materials, an NSF MRSEC, under Grant No. DMR-2011876. J.F. acknowledges support from the Joe Greene Postdoctoral Fellowship from the Materials Research Laboratory at the University of Illinois, Urbana-Champaign.

Author contributions: J.F. and A.S. performed the THz experiments and J.F. completed the corresponding analysis. J.M. and R.S. synthesized and characterized the samples. J.F. and F.M. wrote the manuscript with input from all of the authors. F.M. and P.F. conceived and supervised this project.

Competing interests: The authors declare no competing interests.

Data availability: The data in this manuscript are available from the corresponding authors upon reasonable request.

Corresponding authors: Correspondence to Jennifer Freedberg ([email protected]) and/or Fahad Mahmood ([email protected]).

References

  1. [1]Tatiana Berzina, Anteo Smerieri, Giacomo Ruggeri, Marco Bernabò, Victor Erokhin, and M. P. Fontana. Role of the solid electrolyte composition on the performance of a polymeric memristor. Materials Science and Engineering: C, 30(3):407–411, April 2010.DOI
  2. [2]Shichen Sun, Qiming Tang, Kangkang Zhang, Yeting Wen, Aidan Billings, and Kevin Huang. A focused review on structures and ionic conduction mechanisms in inorganic solid-state proton and hydride anion conductors. Mater. Adv., 4(2):389–407, 2023.
  3. [3]Andrew K. Jonscher. The ‘universal’ dielectric response. Nature, 267(5613):673–679, 1977.
  4. [4]D. P. Singh, K. Shahi, and Kamal K. Kar. Superlinear frequency dependence of AC conductivity and its scaling behavior in xAgI-(1 - x) AgPO3 glass superionic conductors. Solid State Ionics, 287:89–96, April 2016.DOI
  5. [5]Jeppe C. Dyre and Thomas B. Schrøder. Universality of ac conduction in disordered solids. Rev. Mod. Phys., 72(3):873–892, July 2000.
  6. [6]David L. Sidebottom. Universal Approach for Scaling the ac Conductivity in Ionic Glasses. Phys. Rev. Lett., 82(18):3653–3656, May 1999.DOI
  7. [7]Jeppe C Dyre, Philipp Maass, Bernhard Roling, and David L Sidebottom. Fundamental questions relating to ion conduction in disordered solids. Rep. Prog. Phys., 72(4):046501, April 2009.DOI
  8. [8]M. B. M. Mangion and G. P. Johari. Fast ionic conduction via site percolation in AgI-AgPO3 glasses. Physical Review B, 36(16):8845–8846, December 1987.
  9. [9]Bin Zhu and Bengt-Erik Mellander. Intermediate temperature fuel cells with electrolytes based on oxyacid salts. Journal of Power Sources, 52(2):289–293, December 1994.
  10. [10]Tomohide Morimoto, Masaya Nagai, Yosuke Minowa, Masaaki Ashida, Yoichiro Yokotani, Yuji Okuyama, and Yukimune Kani. Microscopic ion migration in solid electrolytes revealed by terahertz time-domain spectroscopy. Nat Commun, 10(1):2662, June 2019.DOI
  11. [11]Vanessa Woo, Channyung Lee, Elif Ertekin, and Nicola H. Perry. Frontiers of defect, transport, and reaction theories in complex and driven solid-state ionic materials. MRS Bulletin, 51(5):543–557, May 2026.
  12. [12]Yixin Xu, Xing Xiang, Zhigang Li, Yanglong Lu, and Yuanguang Zhou. Fast Ionic Transport Governed by Collective Vibrational Dynamics. Phys. Rev. Lett., 136(12):126302, March 2026.DOI
  13. [13]Yong Li, Tao Du, Rasmus Christensen, Timothée Jamin, Zhencai Li, Qi Zhang, Xiaoyi Xu, Kasper Tolborg, Yuanzheng Yue, and Morten M. Smedskjaer. Local Structure Dictates Ionic Transport and Mechanical Properties in Glassy Solid Electrolytes for Lithium Batteries, August 2026.
  14. [14]Yong Li, Tao Du, Timothée Jamin, Zhencai Li, Kasper Tolborg, Yuanzheng Yue, and Morten M. Smedskjaer. Fast Isotropic Li-Ion Diffusion in Zeolitic Imidazolate Framework Glass Electrolytes for Batteries. https://arxiv.org/abs/2608.06902v1, August 2026.
  15. [15]Xiaolin Liu and De-en Jiang. Elastic properties of amorphous lilac solid-state electrolyte. Phys. Rev. Mater., 10:085402, Aug. 2026.
  16. [16]Amy K. Lin, Natan A. Spear, Geoffrey A. Blake, and Scott K. Cushing. The role of the phonons in the ionic conduction mechanism of li-7la-3zr-2o 12 polymorphs, December 2025.arxiv.org/abs/2512.22427
  17. [17]Kim H. Pham, Kiarash Gordiz, Natan A. Spear, Amy K. Lin, Jonathan M. Michelsen, Hanzhe Liu, Daniele Vivona, Geoffrey A. Blake, Yang Shao-Horn, Asegun Henry, Kimberly A. See, and Scott K. Cushing. Correlated terahertz phonon–ion interactions control ion conduction in a solid electrolyte. Mater. Horiz., 13(7):3355–3375, 2026.
  18. [18]Michiko Nakayama, Minoru Hanaya, Atsuo Hatate, and Masaharu Oguni. Glass structure and energetic environment around conducting Ag+ ion in AgI-based fast ion conducting glasses (AgI)x (AgPO3)1-x studied by calorimetry and dielectric measurement. Journal of Non-Crystalline Solids, 172–174:1252–1261, September 1994.
  19. [19]Kyle E. Jacobs and Placid M. Ferreira. Direct e-beam writing of colors on (AgI)x(AgPO3)1-x glass. Journal of Vacuum Science & Technology. B. Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 34(4):041605, May 2016.DOI
  20. [20]Hiroki Takahashi, Eiichiro Matsubara, and Yoshio Waseda. Structural study of superionic conducting glasses AgI-AgPO3 by X-ray diffraction. Journal of Materials Science, 29(9):2536–2540, May 1994.DOI
  21. [21]V. N. Bondarev and P. V. Pikhitsa. Fluctuation theory of low and high frequency Jonscher-type response of disordered ionic conductor. Solid State Ionics, 119(1):337–343, April 1999.
  22. [22]D.I. Novita, Boolchand, P., M. Malki, and M. Micoulaut. Elastic flexibility, fast-ion conduction, boson and floppy modes in AgPO3–AgI glasses. Journal of Physics: Condensed Matter, 21(20):205106, May 2009.DOI
  23. [23]Walter Schirmacher and Giancarlo Ruocco. Heterogeneous Elasticity: The Tale of the Boson Peak, pages 331–373. WORLD SCIENTIFIC (EUROPE), September 2022.
  24. [24]A. Fontana, F. Rossi, C. Armellini, G. Dangelo, G. Tripodo, and A. Bartolotta. Low-temperature optical and thermal properties of AgI-based phosphate glasses. Philosophical Magazine B, 79(11-12):2073–2080, January 1999.
  25. [25]D. Palles, I. Konidakis, C. P. E. Varsamis, and E. I. Kamitsos. Vibrational spectroscopic and bond valence study of structure and bonding in Al2O3-containing AgI–AgPO3 glasses. RSC Advances, 6(20):16697–16710, February 2016.
  26. [26]Teruyoshi Awano and Toshiharu Takahashi. Far-Infrared and Millimeter Wave Spectroscopy of Halides-Doped Silver Phosphate Glasses. J. Phys. Soc. Jpn., 79(Suppl.A):118–121, January 2010.DOI
  27. [27]Andrey D. Poletayev, Matthias C. Hoffmann, James A. Dawson, Samuel W. Teitelbaum, Mariano Trigo, M. Saiful Islam, and Aaron M. Lindenberg. The persistence of memory in ionic conduction probed by nonlinear optics. Nature, 625(7996):691–696, January 2024.
  28. [28]Minoru Hanaya, Atsuo Hatate, and Masaharu Oguni. Activation properties of Ag+–ion conduction in bulk amorphous AgI: Estimation from extrapolation of the AgI composition dependence in AgI–Ag2O–P2O5 glasses. Journal of Physics: Condensed Matter, 15(23):3867–3873, June 2003.DOI
  29. [29]M. Le Stangneunec and S. R. Elliott. Frequency-dependent ionic conductivity in AgI-AgPO3 glasses. Solid State Ionics, 73(3):199–208, November 1994.DOI
  30. [30]Christos Tsonos. Exploring the High Frequencies AC Conductivity Response in Disordered Materials by Using the Damped Harmonic Oscillator. Journal of Composites Science, 6(7):200, July 2022.
  31. [31]A. Rivera, C. León, C. P. E. Varsamis, G. D. Chryssikos, K. L. Ngai, C. M. Roland, and L. J. Buckley. Cation Mass Dependence of the Nearly Constant Dielectric Loss in Alkali Triborate Glasses. Phys. Rev. Lett., 88(12):125902, March 2002.
  32. [32]K. L. Ngai and C. León. Cage decay, near constant loss, and crossover to cooperative ion motion in ionic conductors: Insight from experimental data. Phys. Rev. B, 66(6):064308, August 2002.
  33. [33]P. Lunkenheimer and A. Loidl. Response of Disordered Matter to Electromagnetic Fields. Phys. Rev. Lett., 91(20):207601, November 2003.
  34. [34]L. L. Velli, Christos-Platon E Varsamis, Efstratios I Kamitsos, D Möncke, and D Ehrt. Structural investigation of metaphosphate glasses. Physics and chemistry of glasses, 46(2):178–181, 2005.
  35. [35]A. V. Sokolov, S. Chomet, and O. S. Heavens. Optical Properties of Metals. American Elsevier Pub. Co., New York, 1967.
  36. [36]Micoulaut, M., Malki, M., Novita, D. I., and Boolchand, P. Fast-ion conduction and flexibility and rigidity of solid electrolyte glasses. Phys. Rev. B, 80(18):184205, November 2009.
  37. [37]Klaus Funke and Radha D. Banhatti. Correlated ionic hopping processes in crystalline and glassy electrolytes resulting in MIGRATION-type and nearly-constant-loss-type conductivities. Physical Chemistry Chemical Physics, 7(1):157–165, December 2005.
  38. [38]D. Novita. Molecular structure of (AgPO3) 1-x (AgI) x glasses. March 2005.
  39. [39]David L. Sidebottom. Influence of cation constriction on the ac conductivity dispersion in metaphosphate glasses. Physical Review B, 61(21):14507–14516, June 2000.
  40. [40]Ana Candida Martins Rodrigues, Márcio Luis Ferreira Nascimento, Caio Barca Bragatto, and Jean Louis Souquet. Charge carrier mobility and concentration as a function of composition in AgPO3–AgI glasses. Journal of Chemical Physics, 135(23):234504, December 2011.
  41. [41]Changle Liu and Charles Angell. Mechanical vs electrical relaxation in AgI-based fast ion conducting glasses. Journal of Non-crystalline Solids, 83(1):162–184, June 1986.
  42. [42]Ajay Nahata, David H. Auston, Tony F. Heinz, and Chengjiu Wu. Coherent detection of freely propagating terahertz radiation by electro-optic sampling. Applied Physics Letters, 68(2):150–152, January 1996.
  43. [43]Kyle E. Jacobs and Placid M. Ferreira. Painting and Direct Writing of Silver Nanostructures on Phosphate Glass with Electron Beam Irradiation. Advanced Functional Materials, 25(33):5261–5268, 2015.
  44. [44]Jeff Bezanson, Alan Edelman, Stefan Karpinski, and Viral B Shah. Julia: A fresh approach to numerical computing. SIAM Review, 59(1):65–98, 2017.
  45. [45]Simon Danisch and Julius Krumbiegel. Makie.jl: Flexible high-performance data visualization for Julia. Journal of Open Source Software, 6(65):3349, 2021.
  46. [46]Marcus D Hanwell, Donald E Curtis, David C Lonie, Tim Vandermeersch, Eva Zurek, and Geoffrey R Hutchison. Avogadro: an advanced semantic chemical editor, visualization, and analysis platform. Journal of cheminformatics, 4(1):17, 2012.
  47. [47]Blender Foundation. Blender. Computer software, 2025. Version 4.5.0, released July 15, 2025.
  48. [48]Katherina V. Terebilenko, Igor V. Zatovsky, Ivan V. Ogorodnych, Vyacheslav N. Baumer, and Nikolay S. Slobodyanik. Redetermination of AgPO3. Acta Crystallographica Section E, 67(3):i22, Mar 2011.

Paper details

vlnc:W_d7ftdqag
Version
v1 · latest
Published
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents