betaFeedback

WorksPhysics and Astronomy

Interstitial anionic electrons involved superconductivity and T-linear resistivity behavior in electride La3In

Abstract

Electrides are unique materials because of the existence of interstitial anionic electrons (IAEs). Due to these loosely bound IAEs and their strong interaction with the framework of cations, electrides can host superconductivity with rather high Tc, especially under high pressure, as predicted in theory. However, the experimental observations of superconductivity in electrides are very rare, let alone the detailed studies on intrinsic properties of single crystals. Here, we report the superconducting and normal-state properties of electride La3In single crystals. La3In shows a type-II superconductivity with Tc ~ 9.4 K and a T-linear resistivity in a wide temperature range. Experimental measurements and theoretical calculations suggest that the relatively high Tc could be ascribed to the high density of states around the Fermi level caused by short flat bands along R-M direction and the strong electron-phonon coupling, partially derived from the IAEs. Meanwhile, the T-linear resistivity may reflect the significant electronic correlation effect in this material. These findings will shed light on understanding the role of IAEs in superconductivity and open a promising way to explore high-temperature superconductors in electrides.

Electrides are a class of exotic compounds in which some electrons are localized at interstitial sites and behave as anions without nuclei.[1, 2] Because interstitial anionic electrons (IAEs) are not bounded to specific atomic cores and they have significantly smaller mass when compared to normal anions, these loosely bound IAEs exhibit some unique properties, such as low work function, high hyperpolarizabilities, and very high conductivity.[3, 4, 5] These features enable electrides to be great useful in many applications. For example, the electrides can be a promising cathode material for organic light-emitting diodes and batteries as well as an efficient catalyst for ammonia synthesis.[6, 7, 8] In addition, metallic electrides can also host superconductivity especially under high pressure.[9, 10, 11, 12, 13, 14, 15, 16, 17] Previous theoretical calculations have predicted that some of high-pressure electrides can possess the values of superconducting transition temperatures TcT_c’s beyond the McMillan limit or even close to the temperature of liquid nitrogen, such as Tc∼49T_c \sim49 K for P6/mmnP6/mmn Li5_5 at 150 GPa,[14] ∼54\sim54 K for R3ˉR\bar{3} Li3_3Cs at 380 GPa,[15] ∼73\sim73 K for Fm3ˉmFm\bar{3}m Li8_8Au at 250 GPa,[16] and ∼46\sim46 K for Fm3ˉmFm\bar{3}m Na2_2H at 30 GPa.[17] These results arouse extensive research interest to explore possible high-temperature superconductors based on electrides. Although high-pressure electride superconductors have been predicted intensively, the experimental studies are scarce because of the harsh synthesis conditions under high pressure. As a prototype, the cI16cI16-Li phase formed above 41 GPa (space group I4ˉ3dI\bar{4}3d) with Tc∼20T_c \sim20 K is regarded as an electride superconductor.[18, 19, 20] In comparison with the high-pressure superconducting electrides, some electrides can exhibit superconductivity at ambient pressure. Actually, the first room-temperature and air-stable inorganic electride [Ca24_{24}Al28_{28}O64_{64}]14+⋅4e−^{14+}\cdot4e^- with zero-dimensional IAEs becomes a superconductor at Tc∼0.4T_c \sim0.4 K.[21, 22] Additionally, Mn5_5Si3_3-type electride Nb5_5Ir3_3 with one-dimensional IAEs has been found to exhibit superconductivity with Tc∼9.4T_c \sim9.4 K,[23] but whether the IAEs play a dominant role in the superconductivity of this material is still unknown.

In addition to the superconducting properties, the electric resistivities of metallic materials at normal states also demonstrate diverse behaviours. For conventional metals, when the electron-phonon scattering process is dominant, the temperature dependence of electrical resistivity ρ(T)\rho(T) usually shows a TT-linear dependence at high-temperature region (T1T^1 relation) and crosses to a TnT^n behaviour with n∼5n \sim5 at low-temperature region.[24] On the other hand, if the electron-electron scattering is dominant, ρ(T)\rho(T) will decrease quadratically with temperature (T2T^2 relation) at low-temperature region.[24] However, strange metals can exhibit a TT-linear-dependent ρ(T)\rho(T) extended down to very low temperature even zero,[25] which is notoriously observed in high-temperature cuprate superconductors,[26] and also occur in heavy fermion materials, iron-based superconductors and magic-angle twisted bilayer graphene etc.[27, 28, 29] Thus, the TT-linear ρ(T)\rho(T) becomes a widespread phenomenon in strongly correlated metals. Some studies have attributed this behaviour to charge carriers Planckian-limit scattering at a rate given by ℏ/τ=αkBT\hbar/\tau= \alpha k_{\mathrm{B}}T, where α\alpha is a constant of order unity, ℏ\hbar is the Planck constant and kBk_{\mathrm{B}} is the Boltzmann constant.[30] Meanwhile, other viewpoints, such as antiferromagnetic spin fluctuations[31] and quantum criticality,[32] have also been proposed. However, the underlying origin of the TT-linear resistivity is still under debate and has emerged as one of the major puzzles in the physics of metals.

In this work, we carried out a detailed study on La₃In single crystal and found that it is a type-II superconductor with Tc∼9.4T_{\mathrm{c}} \sim9.4 K, while theoretical calculations suggest that there are IAEs located at the center of empty La₆ octahedra, i.e., La₃In can be regarded as an electride superconductor. Further analysis implies that the large density of states (DOS) at the Fermi level EFE_{\mathrm{F}}, partially originating from the IAEs, as well as the strong electron-phonon coupling lead to the enhanced TcT_{\mathrm{c}} when compared to the face centered cubic (FCC) La element (Tc∼5T_{\mathrm{c}} \sim5–66 K),[33] which has high structural similarity to La₃In. In addition, La₃In exists a TT-linear ρxx(T)\rho_{xx}(T) in a wide temperature range and linear energy dependence of scattering rates at normal state, suggesting certain electronic correlations in this system.

La₃In single crystals were grown by the La-flux method. The detailed methods of experimental characterizations and theoretical calculations are shown in Supplemental Material (SM).[34] Figure 1(a) shows the crystal structure of La₃In, which is isostructural to Cu₃Au.[53] From the perspective of unit cell, La atoms occupy the face-centered positions of the cubic structure, while In atoms occupy the vertex positions. This structure is closely related to the FCC-La in which all of In atoms are replace by La atoms. Interestingly, six La atoms in La₃In form an empty octahedron at the body center of the cubic structure, which can host either interstitial atoms[54] or anionic electrons as shown below. According to the stoichiometric ratio of atomic species in La₃In, we deduce the existence of excess electrons in this material. Figure 1(a)-Figure 1(c) show the respective three-dimensional (3D) map and two-dimensional (2D) maps projected onto the (110) and (001) planes for the electron localization functions (ELF). As can be seen clearly, there are indeed partial electrons separated from the nuclei and confined at the interstitial site of La octahedron, forming the IAEs.[2, 21, 55, 56] Hence, La₃In belongs to the well-known electride compounds. Figure 1(d) shows the PXRD pattern of La₃In polycrystals. It can be well fitted using the Pm3ˉmPm\bar{3}m space group (No. 221) and the lattice parameter a=5.0785(3)a = 5.0785(3) Å, consistent with previous results.[57] Figure 1(e) shows the temperature dependence of electrical resistivity ρxx(T)\rho_{xx}(T) for La₃In from 300 K to 1.6 K at zero field. The ρxx(T)\rho_{xx}(T) decreases with decreasing temperature, indicating the metallic behaviour of La₃In, and the residual resistivity ratio RRR (=ρ(300= \rho(300 K/ρ(10/\rho(10 K)))) is about 10.5.

Electron localization function maps, powder X-ray diffraction pattern, temperature-dependent resistivity, and magnetic susceptibility of La₃In

Figure 1. The electron localization function (ELF) maps of La₃In with (a) the three-dimensional (3D) map, (b) and (c) the two-dimensional (2D) maps projected onto the (110) and (001) planes, respectively. The isosurface values set to 0.5. Blue and green balls represent La and In atoms, respectively. (d) PXRD pattern of ground La₃In single crystals. Inset: photo of typical La₃In single crystal on a 1 mm grid paper. (e) Temperature dependence of ρxx(T)\rho_{xx}(T) at zero field for La₃In single crystal. Upper inset: the fit of normal state ρxx(T)\rho_{xx}(T) (red solid line) using the formula ρxx=ρ0+ATn\rho_{xx} = \rho_0 + AT^n. Lower Inset: the enlarged view of ρxx(T)\rho_{xx}(T) curve below 10.5 K. (f) Temperature dependence of 4πχ(T)4\pi\chi(T) measured at 1 mT with ZFC and FC modes. Inset: the magnetization loops for La₃In at T=1.8T = 1.8 K.

Importantly, the ρxx(T)\rho_{xx}(T) curve exhibits a striking linear behaviour in a wide temperature range between 10 K and 300 K (upper inset of Figure 1(e)). It can be fitted very well by using the formula ρxx(T)=ρ0+ATn\rho_{xx}(T) = \rho_0 + AT^n with n=0.95(1)n = 0.95(1), which is distinctively different from many of normal metals that usually show a T2T^2 or T5T^5 behaviour due to conventional electron-electron or electron-phonon scattering. Such linear temperature dependence of ρxx(T)\rho_{xx}(T) implies that there may be significant electron correlation effects in La₃In, leading to the obvious deviation from Fermi liquid behaviour. On the other hand, with lowering temperature further, La₃In exhibits a superconducting transition and the onset superconducting transition temperature TconsetT_{\mathrm{c}}^{\mathrm{onset}} is about 9.3 K (lower inset of Figure 1(e)), close to the reported values previously (Tc∼9.7T_{\mathrm{c}} \sim9.7 K).[57] Correspondingly, there is a diamagnetic signal in magnetic susceptibility 4πχ4\pi\chi curves at 1 mT (Figure 1(f)) and the TconsetT_{c}^{\mathrm{onset}} is about 9.4 K, consistent with the value obtained from ρxx(T)\rho_{xx}(T) curve. At T=1.8T=1.8 K, the superconducting volume fraction estimated from the zero-field-cooling (ZFC) curve is about 40–50%, confirming the bulk nature of superconductivity in La3_3In. Compared with the ZFC 4πχ(T)4\pi\chi(T) curve, a relatively weak diamagnetic signal of FC 4πχ(T)4\pi\chi(T) curve due to flux pinning effect suggests that La3_3In should be a type-II superconductor. The M(μ0H)M(\mu_{0}H) curve at 1.8 K shows obvious hysteresis (inset of Figure 1(f)), further confirming the feature of type-II superconductor for La3_3In.

Figure 2(a) shows the ρxx(T)\rho_{xx}(T) curves at various magnetic fields up to 7 T. With increasing field, the TcT_{c} shifts to lower temperature gradually but the width of superconducting transition only increases slightly, implying the relatively weak flux pinning effect in La3_3In. The upper critical field μ0Hc2\mu_{0}H_{c2} is determined using the criterion of 50% normal state resistivity just above TcT_{c} and summarized in Figure 2(b). It can be seen that the μ0Hc2(T)\mu_{0}H_{c2}(T) increases with decreasing temperature with a slope dHc2dT∣T=Tc,0=−1.05\left.\frac{dH_{c2}}{dT}\right|_{T=T_{c,0} }=-1.05 T K−1^{-1}, where Tc,0T_{c,0} is the superconducting transition temperature at zero field.

Six-panel plots of resistivity, critical fields, magnetization, Hall resistivity, and carrier concentration and mobility

Figure 2. (a) ρxx(T)\rho_{xx}(T) as a function of temperature in various applied magnetic fields up to 7 T. (b) Temperature dependence of μ0Hc2(T)\mu_{0}H_{c2}(T). The green line represents the fit using the formula μ0Hc2(T)=μ0Hc2(0)[1−(T/Tc)3/2]3/2\mu_{0}H_{c2}(T)=\mu_{0}H_{c2}(0)[1-(T/T_{c})^{3/2}]^{3/2}. (c) Low-field parts of 4πM(μ0Heff)4\pi M(\mu_{0}H_{\mathrm{eff}}) curves at various temperatures below TcT_{c}. The orange line is the Meissner line. (d) Temperature dependence of μ0Hc1(T)\mu_{0}H_{c1}(T). The blue line is the fit using the formula μ0Hc1(T)=μ0Hc1(0)[1−(T/Tc)2]\mu_{0}H_{c1}(T)=\mu_{0}H_{c1}(0)[1-(T/T_{c})^{2}]. (e) Field dependence of ρyx(μ0H)\rho_{yx}(\mu_{0}H) at various temperatures. (f) Temperature dependence of derived n(T)n(T) and μ(T)\mu(T).

The μ0Hc2(T)\mu_{0}H_{c2}(T) can be fitted using the empirical formula μ0Hc2(T)=μ0Hc2(0)[1−(T/Tc)3/2]3/2\mu_{0}H_{c2}(T)=\mu_{0}H_{c2}(0)[1-(T/T_{c})^{3/2}]^{3/2} and the fitted value of zero-field upper critical field μ0Hc2(0)\mu_{0}H_{c2}(0) is 6.72(4) T. This is much smaller than the weak-coupling Pauli paramagnetically limited field μ0Hc2P(0)=1.84Tc=17.11\mu_{0}H_{c2}^{P}(0)=1.84T_{c}=17.11 T, implying that Pauli paramagnetic effect is negligible and the orbital depairing effect should be dominant in La3_3In. Using the fitted μ0Hc2(0)\mu_{0}H_{c2}(0), the calculated Ginzburg–Landau coherence length ξGL(0)\xi_{\mathrm{GL}}(0) from the equation ξGL=Φ02πμ0Hc2\xi_{\mathrm{GL}}=\sqrt{\frac{\Phi_{0}}{2\pi\mu_{0}H_{c2}}} (Φ0=h/2e\Phi_{0}=h/2e is the quantum flux) is 70.0(3) Å.

In order to obtain the lower critical field μ0Hc1(T)\mu_{0}H_{c1}(T), the 4πM4\pi M as a function of field at various temperatures below TcT_{c} were measured (Figure 2(c)). The 4πM(μ0Heff)4\pi M(\mu_{0}H_{\mathrm{eff}}) curves exhibit linear behaviour at low-field region and the slopes are very close to −1, corresponding to the Meissner line (orange line) when the effective field μ0Heff\mu_{0}H_{\mathrm{eff}} is calculated using the formula μ0Heff=μ0Hext−NdM\mu_{0}H_{\mathrm{eff}}=\mu_{0}H_{\mathrm{ext}}-N_{d}M, where μ0Hext\mu_{0}H_{\mathrm{ext}} is the external field and NdN_{d} is the demagnetization factor. The values of μ0Hc1(T)\mu_{0}H_{c1}(T) are determined from the fields where the 4πM(μ0Heff)4\pi M(\mu_{0}H_{\mathrm{eff}}) curves deviate from the linearly field-dependent behaviour, i.e., the magnetic flux starts to penetrate into the sample. As shown in Figure 2(d), the μ0Hc1(T)\mu_{0}H_{c1}(T) increases with decreasing temperature and it can be fitted well using the equation μ0Hc1(T)=μ0Hc1(0)[1−(T/Tc)2]\mu_{0}H_{c1}(T)=\mu_{0}H_{c1}(0)[1-(T/T_{c})^{2}], where μ0Hc1(0)\mu_{0}H_{c1}(0) is the lower critical field at T=0T=0 K. The fitted μ0Hc1(0)\mu_{0}H_{c1}(0) is 18.9(3) mT. The zero-temperature penetration depth λGL(0)\lambda_{\mathrm{GL}}(0) can be evaluated using the formula μ0Hc1=Φ04πλGL2ln⁡λGLξGL\mu_{0}H_{c1}=\frac{\Phi_{0}}{4\pi\lambda_{\mathrm{GL}}^{2}}\ln\frac{\lambda_{\mathrm{GL}}}{\xi_{\mathrm{GL}}}, and it is 1660(26) Å. Accordingly, the calculated Ginzburg–Landau parameter κGL(=λGL/ξGL)\kappa_{\mathrm{GL}}(=\lambda_{\mathrm{GL}}/\xi_{\mathrm{GL}}) is 23.7(3), further confirming that La3_3In is a type-II superconductor. The zero-temperature thermodynamic critical field μ0Hc(0)\mu_{0}H_{c}(0) can be calculated using the formula μ0Hc=μ0Hc2/(2κGL)\mu_{0}H_{c}=\mu_{0}H_{c2}/(\sqrt{2}\kappa_{\mathrm{GL}}) and it yields μ0Hc(0)=201\mu_{0}H_{c}(0)=201 mT for La3_3In. The electron-phonon coupling constant λe−ph\lambda_{\mathrm{e-ph}} can be obtained from the McMillan equation λe−ph=μ∗ln⁡(1.45Tc/ΘD)−1.041.04+ln⁡(1.45Tc/ΘD)(1−0.62μ∗)\lambda_{\mathrm{e-ph}}=\frac{\mu^{*}\ln(1.45T_{c}/\Theta_{D})-1.04}{1.04+\ln(1.45T_{c}/\Theta_{D})(1-0.62\mu^{*})}. When assuming the Coulomb pseudopotential μ∗\mu^{*} is about 0.15, using above values of TconsetT_{c}^{\mathrm{onset}} and the reported ΘD=170\Theta_{D}=170 K,[58] the value of λe−ph\lambda_{\mathrm{e-ph}} is determined to be 1.13(1), implying the strongly coupled BCS superconductivity in La3_3In. Figure 2(e) shows the magnetic field dependence of Hall resistivity ρyx(μ0H)\rho_{yx}(\mu_{0}H) at different temperatures. All curves exhibit linear behaviours with negative slopes, suggesting that electrons dominate the transport in La3_3In. Combined with ρxx(T)\rho_{xx}(T) data, the carrier concentration n(T)n(T) (red square) and mobility μ(T)\mu(T) (blue circle) as functions of temperature can be obtained using one band model (Figure 2(f)). The n(T)n(T) is about 1.4–2.0 ×1022\times10^{22} cm−3^{-3} with a weak temperature dependence when the μ(T)\mu(T) decreases gradually with increasing temperature from 27.6(15) cm2^{2} V−1^{-1} s−1^{-1} at 10 K to 2.2(1) cm2^{2} V−1^{-1} s−1^{-1} at 280 K.

Figure 3(a) shows the electronic band structure and the partial density of states (PDOS) of La3_3In calculated without the spin-orbital coupling (SOC). There are three bands, labeled ii, iiii, and iiiiii, crossing the Fermi level EFE_{\mathrm{F}}, among which there are short flat bands along the R-M path of Brillouin zone (BZ). Based on the orbital weight analysis, these short flat bands are dominated by the La 5d5d electrons and the IAEs. The Fermi surface (FS) sheets of bands ii, iiii, and iiiiii are correspondingly shown in Figure 4(b), on which the Fermi velocities are displayed with the color scales, where the red and blue colors represent the highest and zero Fermi velocities, respectively. It can be seen that the electron-type FS of band iiiiii centered at Γ\Gamma point of BZ is much larger than other FSs and it also has a relatively high Fermi velocity, thus this electron band will contribute to the transport properties, which is in agreement with the results of Hall measurement (Figure 2(e)). It is clear that the FS of band iiii has a much lower Fermi velocity around the MM point, which is favorable for strong electron-phonon coupling (EPC).[59, 60] According to the PDOS shown in Figure 3(a), it is found that

Orbital-resolved electronic band structure, Fermi surfaces, phonon dispersion curves, and Eliashberg spectral function

Figure 3. (a) The orbital-resolved electronic band structure and partial density of states (PDOS). (b) The Fermi-velocity-projected Fermi surface sheets corresponding to the bands ii, iiii, and iiiiii in (a), respectively. (c) Phonon dispersion curves. The size of red dots represents the electron-phonon coupling (EPC) strength λqν\lambda_{\mathbf{q}\nu}. (d) The Eliashberg spectral function α2F(ω)\alpha^{2}F(\omega), frequency-dependent EPC constant λ(ω)\lambda(\omega) and phonon density of states (PHDOS).

Integrated intensity plots, band structures, momentum distribution curves, and scattering rates

Figure 4. (a) Integrated intensity plots at EF±10E_F \pm10 meV taken by the photon energy of 140 eV. The red frames indicate the 2D BZ projected on the (001) surface. (b) Integrated intensity plots on the k∥k_{\parallel}-kzk_z plane taken at EFE_F. Photon energies used for the measurements were from 50 to 148 eV. (c) and (d) Intensity plots and corresponding second derivative plots along the Γ\Gamma-MM and Γ\Gamma-XX directions, respectively. The red solid lines on the corresponding second derivative plots are DFT-calculated bands without any renormalizations and shifts. (e) Intensity plots taken by 140-eV photos along the cut1 and cut2 in (a). (f) The momentum distribution curves (MDCs) of (e). The linear bands are fitted by using the Lorentz function, as indicated by black solid curves. (g) Energy-dependent scattering rate obtained from the half width at half maximum (HWHM) of the fitted MDCs in (f). Red squares are for the left branch, blue ones are for the right branch, and black crosses are for the average value of both branches. The data are linearly fitted as indicated by the lines with different colors.

the electronic states near EFE_{\mathrm{F}} are mainly contributed by the La 5d5d orbitals and the IAEs, which are consistent with the results of band structure. More importantly, there is a van Hove singularity around EFE_{\mathrm{F}}, which is associated with the partial flat bands around MM point and results in a large DOS of 2.15 states/eV per atom at EFE_{\mathrm{F}}. Compared with the value of 1.63 states/eV per atom in FCC-La with Tc∼5T_{\mathrm{c}} \sim5 - 6 K,[33, 61] it suggests that the large DOS at EFE_{\mathrm{F}} (N(EF)N(E_{\mathrm{F}})) for La3_3In could lead to an enhancement of superconductivity.

To better understand the superconducting properties of La3_3In, we subsequently performed the EPC calculations. The calculated total EPC constant λ\lambda is 2.23, indicating a strong EPC in La3_3In compared with that of FCC-La (λ=1.06\lambda= 1.06).[61] This larger theoretical value of λ\lambda than that derived from experimental results (1.13) could be ascribed to the difference between ωlog\omega_{\mathrm{log}} (∼\sim 67 K) and Debye temperature ΘD\Theta_{\mathrm{D}} (∼\sim 170 K).[58] When λ\lambda is larger than 1.3, one needs consider the correction factors f1f_{1} and f2f_{2}, which are calculated to be 1.15 and 1.04, to obtain the superconducting temperature.[51, 52] These lead to a superconducting TcT_{\mathrm{c}} of 10.66 K based on the McMillan-Allen-Dynes formula,[51] which agrees well with the measured result (Figure 1(d)). From the momentum- and mode-resolved EPC parameter λqν\lambda_{\mathbf{q}\nu} (Figure 3(c)), it can be seen that the largest contribution comes from the acoustic branches around X point, which results in a high peak (around 30 cm−1^{-1}) in the Eliashberg spectral function α2F(ω)\alpha^{2}F(\omega) (the top part of Figure 3(d)). Such phonon mode is closely related to σ\sigma-axial vibration of La atoms in the La-In layer. Combined the phonon density of states (PHDOS) and the frequency-dependent EPC parameters λ(ω)\lambda(\omega) (Figure 3(d)), we conclude that the La vibrations play a dominant role in the superconductivity. In short, we propose that the enhanced superconductivity in La3_3In, compared with that of FCC-La,[61] is mainly due to the high electronic states at the Fermi level and the strong EPC strength induced by the low-frequency phonon modes.

Next, we performed angle-resolved photoemission spectroscopy (ARPES) measurements to identify band structures near EFE_{\mathrm{F}} and confirmed the anomalous scattering rate correlated with the non-Fermi liquid behaviour. In Figure 4(a), the FSs taken by a photon energy of 140 eV show big electron-like FSs at the BZ center as predicted by the calculation. However, due to the matrix elements effects, the calculated bands at the MM points were not observed by the 140-eV photons. We therefore have carried out measurements using various photon energies ranging from 50 to 148 eV to investigate kzk_{z} dispersion along the Γ\Gamma-M lines in detail. Figure 4(b) reveals the intensity as a function of photon energy along Γ\Gamma-M taken at EFE_{\mathrm{F}}. According to the periodicity of intensity and free-electron final state model,[62] we found that hν=80h\nu= 80 and 140 eV are close to the Γ\Gamma points. When using around 140-eV photons, the intensity of an electronlike pocket surrounding Γ\Gamma is enhanced and the intensity at the MM points is suppressed. In contrast, using around 80-eV photons, the intensity at Γ\Gamma and MM is almost the same. The band structures along the Γ\Gamma-MM and Γ\Gamma-XX directions are shown in Figure 4(c) and Figure 4(d). The calculated bands on the corresponding second derivative plots well match the mainly ARPES dispersive features without any renormalizations, except for the bands near -1 eV below EFE_F needing to be shifted down as marked in the figures which could be explained in terms of interband coupling and correlation effects.[62]

Interestingly, the electron-type FS surrounding the BZ center exhibits linear dispersions, which can be more clearly seen by using 140-eV photons as shown in Figure 4(e) and the corresponding momentum distribution curves (MDCs) (Figure 4(f)). The scattering rates obtained from the fitted MDCs vary linearly with the binding energies up to 0.25 and 0.4 eV along the Cut1 and Cut2 lines, respectively. Despite the equal theoretical values of the half-width at half maximum (HWHM) on the right and left branches of the linear bands, some points deviate from the lines with opposite tendencies due to the effect of the intensity of near bands. The average values are even better for the linear relationship, especially for the MDCs of Cut2. A cone-like feature is formed at about -1.2 eV below EFE_F as marked at Cut2 in the Figure 4(e). Anomalous scattering rates are inconsistent with the 3D Fermi-liquid theory (1/τ∝ω21/\tau\propto\omega^2) or the 2D Fermi-liquid theory [1/τ∝(ω2/ϵF)ln⁡(4ϵF/ω)][1/\tau\propto(\omega^2/\epsilon_F)\ln(4\epsilon_F/\omega)].[63] Similar linear scattering rates are observed in iron pnictides,[64, 65] consistent with non-Fermi liquid behaviours observed in the resistivity. The non-Fermi liquid behaviours in these materials are possibly associated with correlation effects induced by high density states saddle points or partial flat bands at EFE_F, as also demonstrated in the calculated PDOS and band structure (Figure 3(a)).

When compared to FCC-La, the higher DOS around EFE_F in La3_3In mainly originates from the La 5dd and IAE band near the MM point of BZ. Moreover, the proportion of IAE near EFE_F in the latter increases significantly. Therefore, we speculate that IAE is also involved in the phenomenon of enhanced superconductivity. Such high DOS could also lead to certain electronic correlations and corresponding TT linear resistivity behaviour in this material. In addition, there may be a strong EPC between IAEs at the center of La6_6 octahedra and the zz-axial vibration of apical La atoms of that La6_6 octahedra. Unlike traditional anions characterized by strong electron localization, the IAEs usually exhibit weaker localization and higher activity.[5] This feature can facilitate their hybridization with atomic valence orbitals and strengthening their coupling with the vibrations of surrounding La atoms.[13, 66, 67] Similar enhancement of EPC have also been proposed in the Li8_8Au where the IAEs are located at the cubic Li8_8 cage centers and the IAEs induce strong coupling to the vibration of Li8_8 cages enhancing the phonon mediated superconductivity.[16]

For the TT-linear behaviour of resistivity, usually, this phenomenon appears when T≥ΘD/5T \ge\Theta_{\mathrm{D}}/5 when the electron-phonon scattering dominates. As mentioned above, the ΘD\Theta_{\mathrm{D}} of La3_3In is about 170 K, meaning that the TT-linear behaviour should appear above 34 K. It is much higher than 10 K observed in La3_3In. Moreover, it is noted that for materials with small Fermi momentum kFk_{\mathrm{F}}, i.e., low carrier density nn since kF∼n1/dk_{\mathrm{F}} \sim n^{1/d} with the system dimensionality of dd, ΘD\Theta_{\mathrm{D}} should be replaced by TBG=2ℏkFvT_{\mathrm{BG}} = 2\hbar k_{\mathrm{F}}v, where vv is the phonon velocity.[68] Due to TBG∼n1/dT_{\mathrm{BG}} \sim n^{1/d}, TBGT_{\mathrm{BG}} could be much less than ΘD\Theta_{\mathrm{D}} in low-density metals in principle, leading to the TT-linear behaviour persisting to low temperature. But for La3_3In, the nn is about 1022 cm−310^{22}\ \mathrm{cm}^{-3} with a rather big FS around Γ\Gamma point of BZ, it seems unlikely to satisfy the condition of TBG≤ΘDT_{\mathrm{BG}} \le\Theta_{\mathrm{D}}. Thus, electron-phonon scattering might not be enough to explain TT-linear resistivity in the low-temperature region. Moreover, combined with the linear energy dependence of scattering rates observed from ARPES measurements, it suggests that such phenomenon at low temperature may have certain similarity to strongly correlated electronic systems like high temperature cuprate or iron-based superconductors. Nevertheless, unlike unconventional superconductors, the spin fluctuations are absent in La3_3In, which provides a constrain on the unified theoretical model in describing the TT-linear resistivity.

In summary, our present studies propose that La3_3In should be an superconducting electride with rather high TcT_{\mathrm{c}}, which are closely related to the high DOS, strong EPC, and partial flat band near EFE_{\mathrm{F}} that involve both La 5d5d electrons and IAEs. In addition, the TT-linear resistivity persists down to 10 K implies that besides electron-phonon interaction, the electronic correlation effects may also play an important role in the physical properties of La3_3In. In light of this work, we expect superconducting electride materials with IAEs can offer a new platform to explore exotic and/or high temperature superconductivity as well as to study the unique EPC and other electronic correlation phenomena.

This work was supported by the National Key R&D Program of China (Grants No. 2023YFA1406500, 2022YFA1403800, 2022YFA1403103 and 2022YFB3608000), the National Natural Science Foundation of China (Grants No. 12274459, 12222413, and 12174443), the Beijing Natural Science Foundation (Grant No. Z200005), the Natural Science Foundation of Shanghai (Grants No. 23ZR1482200 and No. 22ZR1473300), and the funding of Ningbo Yongjiang Talent Program and Ningbo University. Computational resources were provided by the Physical Laboratory of High-Performance Computing at Renmin University of China.

† Z.J.T, P.H.S, and P.C.M contributed equally to this work.

References

  1. [1]J. L. Dye, Acc. Chem. Res. 42, 1564-1572 (2009).
  2. [2]J. L. Dye, Science 301, 607-608 (2003).
  3. [3]Y. Toda, H. Yanagi, E. Ikenaga, J. J. Kim, M. Kobata, S. Ueda, T. Kamiya, M. Hirano, K. Kobayashi, and H. Hosono, Adv. Mater. 19, 3564-3569 (2007).
  4. [4]H. L. Xu, Z. R. Li, D. Wu, B. Q. Wang, Y. Li, F. L. Gu, and Y. Aoki, J. Am. Chem. Soc. 129, 2967-2970 (2007).
  5. [5]K. Lee, S. W. Kim, Y. Toda, S. Matsuishi, and H. Hosono, Nature 494, 336-340 (2013).
  6. [6]K. B. Kim, M. Kikuchi, M. Miyakawa, H. Yanagi, T. Kamiya, M. Hirano, and H. Hosono, J. Phys. Chem. C 111, 8403-8406 (2007).
  7. [7]M. Kitano, Y. Inoue, Y. Yamazaki, F. Hayashi, S. Kanbara, S. Matsuishi, T. Yokoyama, S. W. Kim, M. Hara, and H. Hosono, Nat. Chem. 4, 934-940 (2012).
  8. [8]J. Hu, B. Xu, S. A. Yang, S. Guan, C. Ouyang, and Y. Yao, ACS Appl. Mater. Interfaces 7, 24016-24022 (2015).
  9. [9]Z. Zhao, S. Zhang, T. Yu, H. Xu, X. A. Bergara, and G. Yang, Phys. Rev. Lett. 122, 097002 (2019).
  10. [10]Z. Liu, Q. Zhuang, F. Tian, D. Duan, H. Song, Z. Zhang, F. Li, H. Li, D. Li, and T. Cui, Phys. Rev. Lett. 127, 157002 (2021).
  11. [11]Z. Liu, D. Duan, Q. Zhuang, and T. Cui, Phys. Rev. B 108, L100507 (2023).
  12. [12]Y. Zhao, A. Bergara, X. Zhang, F. Li, Y. Liu, and G. Yang, Phys. Rev. B 108, 104505 (2023).
  13. [13]Z. Guo, A. Bergara, X. Zhang, X. Li, S. Ding, and G. Yang, Phys. Rev. B 109, 134505 (2024).
  14. [14]Z. Wan, C. Zhang, T. Yang, W. Xu, and R. Zhang, New J. Phys. 24, 113012 (2022).
  15. [15]H. M. Huang, Q. Zhu, V. A. Blatov, A. R. Oganov, X. Wei, P. Jiang, and Y. L. Li, Nano Lett. 23, 5012-5018 (2023).
  16. [16]X. Zhang, Y. Yao, S. Ding, A. Bergara, F. Li, Y. Liu, X. F. Zhou, and G. Yang, Phys. Rev. B 107, L100501 (2023).
  17. [17]Q. Wang, S. Zhang, H. Li, H. Wang, G. Liu, J. Ma, H. Xu, H. Liu, and Y. Ma, J. Mater. Chem. A, 11, 21345-21353 (2023).
  18. [18]K. Shimizu, H. Ishikawa, D. Takao, T. Yagi, and K. Amaya, Nature 419, 597-599 (2002).
  19. [19]V. V. Struzhkin, M. I. Eremets, W. Gan, H. Mao, and R. J. Hemley, Science 298, 1213-1215 (2002).
  20. [20]H. Hosono, S. W. Kim, S. Matsuishi, S. Tanaka, A. Miyake, T. Kagayama, and K. Shimizu, Philos. T. R. Soc. A 373, 20140450 (2015).
  21. [21]S. Matsuishi, Y. Toda, M. Miyakawa, K. Hayashi, T. Kamiya, M. Hirano, I. Tanaka, and H. Hosono, Science 301, 626-629 (2003).
  22. [22]M. Miyakawa, S. W. Kim, M. Hirano, Y. Kohama, H. Kawaji, T. Atake, H. Ikegami, K. Kono, and H. Hosono, J. Am. Chem. Soc. 129, 7270-7271 (2007).
  23. [23]Y. Zhang, B. Wang, Z. Xiao, Y. Lu, T. Kamiya, Y. Uwatoko, H. Kageyama, and H. Hosono, npj Quantum Mater. 2, 45 (2017).
  24. [24]J. M. Ziman, Electrons and Phonons: The Theory of Transport Phenomena in Solids (Oxford University Press, 2001).
  25. [25]P. W. Phillips, N. E. Hussey, and P. Abbamonte, Science 377, eabh4273 (2022).
  26. [26]M. Gurvitch and A. T. Fiory, Phys. Rev. Lett. 59, 1337-1340 (1987).
  27. [27]H. V. Löhneysen, T. Pietrus, G. Portisch, H. G. Schlager, A. Schröder, M. Sieck, and T. Trappmann, Phys. Rev. Lett. 72, 3262-3265 (1994).
  28. [28]N. Doiron-Leyraud, P. Auban-Senzier, S. René de Cotret, C. Bourbonnais, D. Jérôme, K. Bechgaard, and L. Taillefer, Phys. Rev. B 80, 214531 (2009).
  29. [29]A. Jaoui, I. Das, G. D. Batistia, J. Díez-Mérida, X. Lu, K. Watanabe, T. Taniguchi, H.iroaki Ishizuka, L. Levitov, and D. K. Eletov, Nat. Phys. 18, 633-638 (2022).
  30. [30]S. A. Hartnoll and A. P. Mackenzie, Rev. Mod. Phys. 94, 041002 (2022).
  31. [31]P. Monthoux and D. Pines, Phys. Rev. B 49, 4261 (1994).
  32. [32]Y. Dagan, M. M. Qazilbash, C. P. Hill, V. N. Kulkarni, and R. L. Greene, Phys. Rev. Lett. 92, 167001 (2004).
  33. [33]W. T. Ziegler, R. A. Young, and A. L. Floyd Jr, J. Am. Chem. Soc. 75, 1215-1221 (1953).
  34. [34]See Supplemental Material for the detailed methods of crystal growth, experimental characterizations and theoretical calculations, which includes Refs. [35-52].
  35. [51]P. B. Allen, Phys. Rev. B 6, 2577 (1972).
  36. [52]P. B. Allen, and R. C. Dynes, Phys. Rev. B 12, 905 (1975).
  37. [53]J. T. Zhao, Z. C. Dong, J. T. Vaughey, J. E. Ostenon, and J. D. Corbett, J. Alloys Compd. 230, 1-12 (1995).
  38. [54]K. A. Gschneidner Jr, O. D. McMasters, and J. E. Ostenson, J. Less-Common Met. 62, 167-177 (1978)
  39. [55]C. Park, S. W. Kim, and M. Yoon, Phys. Rev. Lett. 120, 026401 (2018).
  40. [56]H. Hosono, and M. Kitano, Chem. Rev. 121, 3121-3185 (2021).
  41. [57]C. S. Garde, J. Ray, and G. Chandra, J. Alloys Compd. 198, 165-172 (1993)
  42. [58]P. Ravindran, and R. Asokamani, J. Phys. Condens. Mat 7, 5567 (1995).
  43. [59]X. Zhang, M. Zhao, and F. Liu, Phys. Rev. B 100, 104527 (2019).
  44. [60]J. M. An, and W. E. Pickett, Phys. Rev. Lett. 86, 4366 (2001).
  45. [61]S. Baǧci, H. M. Tütüncü, S. Duman, and G. P. Srivastava, Phys. Rev. B 81, 144507 (2010).
  46. [62]Z. H. Liu, P. Richard, N. Xu, G. Xu, Y. Li, X. C. Fang, L. L. Jia, G. F. Chen, D. M. Wang, J. B. He, T. Qian, J. P. Hu, H. Ding, and S. C. Wang, Phys. Rev. Lett. 109, 037003 (2012).
  47. [63]L. L. Jia, Z. H. Liu, Y. P. Cai, T. Qian, X. P. Wang, H. Miao, P. Richard, Y. G. Zhao, Y. Li, D. M. Wang, J. B. He, M. Shi, G. F. Chen, H. Ding, and S. C. Wang, Phys. Rev. B 90, 035133 (2014).
  48. [64]Y. Nakajima, T. Metz, C. Eckberg, K. Kirschenbaum, A. Hughes, R. Wang, L. Wang, S. R. Saha, I. L. Liu, N. P. Butch, D. Campbell, Y. S. Eo, D. Graf, Z. Liu, S. V. Borisenko, P. Y. Zavalij, and J. Paglione, Commun. Phys. 3, 181 (2020).
  49. [65]Z. Liu, H. Mao, Y. Nakajima, J. Paglione, Z. Yin, and S. Borisenko, Phys. Rev. B 109, 075103 (2024).
  50. [66]M. S. Miao, R. Hoffmann, J. Botana, I. I. Naumov, and R. J. Hemley, Angew. Chem. Int. Ed. 129, 992-995 (2017).
  51. [67]S. Racioppi, C. V. Storm, M. I. McMahon, and E. Zurek, Angew. Chem. Int. Ed. 135, e202310802 (2023).
  52. [68]E. H. Hwang and S. Das Sarma, Phys. Rev. B 99, 085105 (2019).

Paper details

vlnc:W_d8j99ru6
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents