WorksPhysics and Astronomy
Finite-Temperature Transconductance of Multiterminal Josephson Junctions with Topological Andreev Spectra
Abstract
Multiterminal Josephson junctions (MTJJs) provide a controllable platform for engineering topological Andreev spectra. At zero temperature, Andreev bound states (ABSs) with nonzero Chern numbers give rise to quantized transconductance between superconducting terminals. We derive the finite-temperature transconductance of MTJJs using linear-response theory. We first demonstrate the destructive role of temperature: changes in the thermal occupations of the ABSs destroy exact transconductance quantization. We then show that finite temperature can also play a constructive role by making the transconductance sensitive to finite-energy topological crossings hidden from the zero-temperature response. Our results establish the thermal limitations of transconductance quantization and identify finite-temperature transport as a probe of otherwise inaccessible topology in Andreev spectra.
Introduction
Topological band theory provides a framework for phases whose transport can be governed by integer topological invariants [1]. Representative examples include topological insulators [2], Weyl semimetals [3], and topological superconductors [4]. The paradigmatic quantized response is the integer quantum Hall effect, for which [5, 6]. Here, is an integer Chern number, is the electron charge, and is Planck’s constant.
Synthetic topological systems realize analogous band structures in controllable parameter spaces rather than exclusively in real space [7, 8]. Examples include Floquet systems [9, 10], photonic platforms [11, 12], and superconducting circuits [13, 14, 15]. Their tunability also enables effective topological physics in dimensions that are difficult to access in ordinary materials [16, 17, 18, 19].
Multiterminal Josephson junctions (MTJJs) are another tunable platform for exploring unconventional superconducting transport and phase-controlled Andreev physics [20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41] and, in particular, synthetic topology [42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64]. In an -terminal junction, the independent superconducting phase differences act as synthetic quasimomenta, while the Andreev bound states (ABSs) form an effective band structure in this phase space. For , the phase space is at least three-dimensional and can host Weyl points (WPs), i.e., conical degeneracies carrying integer topological charge [42, 43, 47]. These WPs can result in a nonzero ground-state Chern number or redistribute Chern numbers among individual ABSs.
In the adiabatic transport regime, MTJJ topology manifests itself in the dc transconductance. Incommensurate voltages applied to two superconducting (SC) leads make the corresponding SC phases densely cover a two-dimensional phase Brillouin zone (BZ), i.e., a torus. The BZ-averaged transconductance is then quantized as , where is the ground-state Chern number. This is the synthetic-phase analogue of the quantized Hall response [43].
Experimental observation of this quantization is challenging. Finite bias can drive nonadiabatic ABS transitions and restrict the adiabatic voltage window [44], while level broadening can smear the response [52]. The measurement is also intrinsically nonlocal because it correlates a voltage on one terminal with the current in another. These limitations have motivated complementary probes, including tunneling [59, 62] and microwave spectroscopy [50, 51].
Quantization can nevertheless be robust in special regimes, for example with Majorana-hosting SC terminals [53] or when the scattering matrix of the normal region lies near a chiral point [63]. For time-reversal-symmetric junctions, continuum states above the SC gap can also preserve a quantized contribution [49].
A further open question concerns the effect of finite temperature on transconductance quantization. At finite temperature, ABS occupations are no longer step functions, so different states acquire unequal thermal weights. How this thermal reweighting modifies the quantized response has not been systematically investigated. In addition, it remains unclear whether transconductance can probe the topology of individual ABSs rather than only that of the ground state. This question is particularly relevant when individual ABSs carry nonzero Chern numbers whose sum vanishes, so that the zero-temperature transconductance contains no signature of their individual topology.
Here we address both questions in a four-terminal MTJJ within the framework of effective quantum dot (QD) models [50, 58]. First, we determine how thermal occupation modifies the quantized transconductance and show that exact quantization is lost once the temperature becomes comparable to the relevant ABS energy scale. Second, we show that finite-temperature transconductance can reveal individual-ABS topology that is absent from the zero-temperature response. Thus, the same thermal reweighting that limits quantization can also expose otherwise hidden structure of the Andreev spectrum.
The paper is organized as follows. In § 2 we discuss the synthetic topology of MTJJs. In § 3 we introduce the three effective QD models used throughout the paper and summarize their topological properties. In § 4 we derive the finite-temperature transconductance within linear-response theory. In § 5 we demonstrate the thermal breakdown of the transconductance quantization. In § 6 we investigate the finite-temperature signatures of individual-ABS topology. In § 7 we discuss the coexistence of ground-state and individual-ABS topology. In § 8 we discuss the experimental implications. In § 9 we present our conclusions. Technical derivations are collected in the Appendices.
Topology of MTJJs
We first summarize the synthetic topology of MTJJs. This section concerns the zero-temperature limit, ; the finite-temperature response is introduced in § 4.
Synthetic topology
We consider SC terminals coupled through a normal region; see Figure 1 for an example of four-terminal geometry. SC terminals are -wave superconductors with gaps and phases . Gauge invariance leaves independent SC phase differences, and we set . We assume relevant ABSs, which are described by a Bogoliubov–de Gennes (BdG) Hamiltonian . Particle-hole symmetry gives negative-energy states and positive-energy partners. Energies are measured relative to the common chemical potential .
Figure 1. Schematic four-terminal MTJJ. Four -wave SC leads with phases () are coupled through a normal region hosting the ABSs described by . We choose the gauge . Voltages and drive and , while is controlled by the flux through the loop connecting leads 0 and 3. The current is measured in lead , and the junction is at temperature .
The matrix elements of depend on the SC phases . These phases define a synthetic parameter space, in which the ABS spectrum can acquire nontrivial topology. For the th ABS eigenstate of , with energy , we define the Berry curvature in the phase plane as
and the corresponding Chern number as
The derivatives and integrals are taken over the two SC phases spanning the chosen two-dimensional synthetic BZ.
At , the ground-state Berry curvature and Chern number are obtained by summing over the occupied negative-energy states:
A nonzero identifies a topologically nontrivial th ABS, whereas identifies a topologically nontrivial ground state. Importantly, individual ABSs can carry nonzero Chern numbers whose sum cancels, yielding a topologically trivial ground state with .
We now focus on a four-terminal MTJJ (). Topology is evaluated on the phase torus, with as a control parameter, so we study and . We call a parameter regime topological when at least one ABS has over a finite interval of . We distinguish a ground-state topological regime, , from an individual-ABS topological regime, and for at least one band.
Different types of WPs
The synthetic topology of MTJJs is governed by WPs in the ABS spectrum [43]. We distinguish two types. Zero-energy WPs occur when a positive-energy ABS meets its particle-hole partner at ; see Figure 2(a). Near a zero-energy WP at , the effective Hamiltonian is
Figure 2. Schematic ABS spectra versus the control phase at fixed and . At , states with () are occupied (unoccupied). (a) At the zero-energy WP , the negative- and positive-energy branches change their Chern numbers by and , giving . (b) Particle-hole-related finite-energy WPs occur at and . At each crossing, the lower and upper branches change their Chern numbers by and , while the ground-state Chern number remains unchanged, .
where , is a vector of Pauli matrices, and is a real velocity matrix. A zero-energy WP has topological charge
Crossing the zero-energy WP as changes the Chern numbers of the negative- and positive-energy branches by and , respectively. At , only the former is occupied, so the ground-state Chern number changes by .
Finite-energy WPs occur when two ABSs within the same occupation sector cross; see Figure 2(b). Particle-hole symmetry generates a partner crossing at the opposite energy. In a particle-hole-related basis, the four relevant BdG states are described by
where
Here is the positive-energy crossing energy, describes the cone tilt, is a velocity matrix, and . The topology is encoded in , giving the finite-energy WP charge
The particle-hole-related finite-energy WPs at carry the same charge . At each crossing, the lower and upper branches change their Chern numbers by and . Because both negative-energy branches are occupied at , these changes cancel in the ground-state sum. Finite-energy WPs therefore redistribute Chern numbers among individual ABSs without changing the ground-state Chern number.
Thus zero-energy WPs change the ground-state Chern number, whereas finite-energy WPs redistribute Chern numbers among individual ABSs while leaving the ground-state Chern number unchanged. Importantly, finite-energy WPs can result in nontrivial individual-ABS topology even when the ground state is topologically trivial.
Effective QD models
We model the ABS spectra using effective QD models [50, 58], with single-level QDs tunnel coupled to SC leads. Integrating out the leads in the atomic limit, , yields an effective BdG Hamiltonian for resonant ABSs with ; Appendix § 11.§ 1 gives the derivation. We compute the Chern numbers of the ABSs from the effective Hamiltonians using the discretized Fukui algorithm [65].
We focus on three four-terminal QD models with distinct topological properties. The symmetric single-QD model () is the minimal realization of nontrivial ground-state topology [50]; see Figure 3(a). The symmetric normal-coupled double-QD model () provides a minimal multiband realization of ground-state topology [58]; see Figure 3(b). Finally, the antisymmetric SC-coupled double-QD model supports finite-energy WPs and hence nontrivial individual-ABS topology; see Figure 3(c). Appendix § 11.§ 2 summarizes the corresponding effective Hamiltonians.
Figure 3. Four-terminal QD models: (a) symmetric single-QD, (b) symmetric normal-coupled double-QD, and (c) antisymmetric SC-coupled double-QD. Each QD represents one fermionic level. Panels (a) and (b) use equal on-site energies and dot–lead couplings ; panel (c) uses opposite dot energies and strong/weak couplings and . Both double-QD models contain normal hopping ; the shared leads 1 and 2 in panel (c) additionally generate the nonlocal SC coupling . Neighboring SC leads in panel (a) are directly coupled by .
Symmetric single-QD model
The symmetric single-QD model shown in Figure 3(a) is the four-terminal model with one topological resonant ABS [50]. A dot with on-site energy couples equally to the four SC terminals with amplitude , while neighboring terminals are directly coupled by . The effective dot Hamiltonian is
with
Here , , and is the normal-state density of states per spin at the Fermi level. The sum in Eq. (10) assumes that the index is cyclic, so that .
The ground-state Chern number and a representative zero-energy WP are shown in Figure 4(a) and Figure 4(d), respectively. Because the single-QD model has only one positive-energy ABS [red curve in Figure 4(d)], it cannot host finite-energy WPs, whereas zero-energy WPs occur over a broad parameter range; see Appendix § 12.§ 1.
Figure 4. Chern numbers (a)–(c) and representative ABS spectra (d)–(f) versus . Ground-state and individual-ABS topological regions are shaded light blue and light red, respectively. Red and blue denote the ABS branches whose Chern numbers are shown; additional branches are black. Dashed lines in (d)–(f) mark the first Chern-number jumps in (a)–(c). (a,d) Symmetric single-QD: , ; panel (d), at , , shows a zero-energy WP. (b,e) Symmetric normal-coupled double-QD: , ; panel (e), at , , shows a zero-energy WP. (c,f) Antisymmetric SC-coupled double-QD: , , . Panel (c) shows , , and , with and in the individual-ABS topological region. Panel (f), at , , shows the occupied-sector finite-energy WP and its particle-hole-related crossing in the unoccupied sector (black).
Double-QD model
To study multiband topology (), in particular individual-ABS topology, we next consider double-QD models with two resonant ABS pairs. A general double-QD model consisting of two QDs coupled to SC leads has an effective BdG Hamiltonian of the block form
where the diagonal and off-diagonal blocks respectively are given by
Here and are the on-site energy and induced pairing amplitude on dot , respectively; is the normal interdot hopping and is a nonlocal SC interdot coupling generated when the dots share common SC leads.
We consider two double-QD geometries. In the normal-coupled model [Figure 3(b)], the two QDs couple to disjoint pairs of SC leads, so while . In the SC-coupled model [Figure 3(c)], the QDs share SC leads, which generates a nonlocal SC coupling in addition to . As we will see below, the difference in interdot coupling leads to qualitatively different ABS topology in these two models.
Symmetric normal-coupled double-QD model
We first consider the symmetric normal-coupled double-QD model shown in Figure 3(b). It contains two dots with equal on-site energies [58]. Dot 1 couples to terminals 0 and 1, and dot 2 to terminals 2 and 3, all with amplitude . Thus, in Eq. (12), , , and , with . The dots are coupled only by the normal hopping , so .
This model describes two ABSs primarily formed between leads (0, 1) and (2, 3), respectively, while the normal interdot hopping introduces a weak hybridization between these two states. Over a finite range of , this hybridization produces zero-energy WPs and a nontrivial ground-state Chern number [58]. Figure 4(b) and Figure 4(e) show and a representative zero-energy WP. The lowest positive- and negative-energy ABSs [red and blue curves in Figure 4(e), respectively] acquire nonzero Chern numbers through zero-energy WPs, whereas finite-energy WPs are absent and the higher-energy pair [black curves in Figure 4(e)] remains topologically trivial; see also Appendix § 12.§ 2.1.
Antisymmetric SC-coupled double-QD model
The normal-coupled double-QD model does not support robust finite-energy WPs and hence does not realize individual-ABS topology. We therefore introduce an SC-coupled double-QD model with a nonlocal interdot pairing in addition to normal hopping . The purely SC-coupled limit () is also insufficient to produce robust finite-energy WPs; see Appendix § 12.§ 2.2. Thus both couplings are required in our working model. Starting from the geometry of Ref. [58], we allow the central leads 1 and 2 to couple to both dots, which generates the phase-dependent nonlocal pairing .
For concreteness, we consider below the antisymmetric geometry with opposite dot energies; see Figure 3(c). Dot 1 couples strongly to terminals 0 and 1 with amplitude and weakly to terminal 2 with ; dot 2 couples strongly to terminals 2 and 3 and weakly to terminal 1. The two resulting ABSs are therefore centered on the (0, 1) and (2, 3) terminal pairs but hybridize both through the shared SC terminals and through direct normal hopping. In Eqs. (11) and (12), the parameters are , , and , with , , and .
Figure 4(c) and Figure 4(f) show the individual-ABS Chern numbers and representative finite-energy WPs in the ABS spectrum, respectively. In Figure 4(f) the two occupied topological ABSs are shown in red and blue, while their particle-hole partners are shown in black. For these parameters, finite-energy WPs generate nontrivial individual-ABS topology while the absence of zero-energy WPs keeps the ground-state Chern number trivial. As we will discuss in § 7, other parameter choices yield ground-state topology and regimes in which ground-state and individual-ABS topology coexist.
Transconductance: linear response theory
In this section, we first recall the zero-temperature quantized transconductance of Ref. [43] and then derive its finite-temperature generalization from the Kubo formula. The resulting expression also separates two ways in which thermal occupations modify the topological response.
In our consideration, we assume quasistatic thermal equilibrium: the ABS relaxation rate is much larger than the Josephson drive frequencies, so the instantaneous occupations are given by the Fermi function. Additionally, we retain only the ABS contribution to the transconductance and neglect continuum states. In the atomic limit used here, the continuum is pushed to infinite energy and its thermal response is therefore negligible.
Zero-temperature transconductance
Within adiabatic perturbation theory [43], a slowly varying SC phase results in
where is the SC current in lead and is the voltage applied to lead . At , the sum runs over the occupied, negative-energy BdG states.
For two incommensurate voltages, the corresponding phases densely cover the synthetic BZ. The first term in Eq. (13) averages to zero, while the Berry-curvature term yields the quantized dc transconductance
where denotes the BZ-averaged current. Thus the transconductance between distinct terminals is quantized in units of and is determined by the ground-state Chern number [43].
Finite-temperature transconductance
To obtain finite-temperature transconductance, we use linear-response theory. We first define the ABS susceptibility as [39, 66]
This susceptibility is the ABS-mediated current response in lead to an ac voltage applied to lead .
In the Lehmann representation, the retarded Kubo response is
see Appendix § 13.§ 1. Here is the current-operator matrix element between BdG eigenstates and , and is the Fermi function (we set the Boltzmann constant ). The sum includes both positive- and negative-energy states, and implies the retarded prescription.
In the adiabatic limit, , we expand the ABS susceptibility to first order in frequency:
Here is the static susceptibility and is the leading dynamical term. Together with the diamagnetic and population contributions, the static response determines the inverse Josephson inductance . Here we focus on the topological term linear in :
which for defines the finite-temperature Berry curvature
Averaging over the BZ gives the finite-temperature transconductance
For compactness, we refer to the BZ integral as the finite-temperature Chern number. Equation (20) is then formally identical to the result under . At , however, is generally noninteger and is not a topological invariant.
At , the finite-temperature Berry curvature and finite-temperature Chern number reduce to the Berry curvature and Chern number in Eq. (3); see Appendix § 13.§ 2. At , Fermi factors reweight the ABS contributions, so the finite-temperature and zero-temperature responses no longer coincide. Exact transconductance quantization is therefore lost, and a finite transconductance can also appear where the zero-temperature ground-state Chern number vanishes.
Mechanisms of temperature-induced changes in finite-temperature Berry curvature
Equation (19) reveals two distinct thermal contributions to the finite-temperature Berry curvature and, after BZ averaging, to the finite-temperature transconductance. The first (occupied–unoccupied) contribution comes from matrix elements between the states on opposite sides of the Fermi level at . Thermal occupation reduces their Fermi-factor difference, suppressing this contribution. The effect is especially pronounced near zero-energy WPs, where the excitation energy vanishes.
The second (same-sector) contribution comes from matrix elements between two states in the same occupation sector. Such terms vanish at zero temperature because the two Fermi factors are equal, but become finite when the levels are thermally populated unequally. This mechanism requires at least two positive-energy ABSs (and their particle-hole partners) and is enhanced near finite-energy WPs. In a multiband () spectrum both mechanisms generally coexist. To isolate them analytically, we use the single-QD model for the occupied–unoccupied contribution and the four-level Hamiltonian in Eq. (6) for the same-sector contribution.
Single-QD model: occupied–unoccupied contribution
For a general single-QD, the BdG Hamiltonian is determined by a single vector [see Eq. (9)]. Equation (19) then reduces to
where is the phase-dependent ABS energy.
Equation (21) shows directly that temperature suppresses the Berry-curvature response. The negative-energy state loses occupation while its positive-energy particle-hole partner acquires occupation and contributes with the opposite Berry curvature. Their combined finite-temperature Berry curvature is therefore reduced relative to the Berry curvature.
The suppression is strongly nonuniform in phase space. Regions with are essentially unchanged, whereas low-energy regions with are strongly reweighted. In particular, near a zero-energy WP, , the finite-temperature Berry curvature becomes
Relative to the zero-temperature Berry curvature, this result is suppressed by . The finite-temperature Berry curvature nevertheless remains singular at the zero-energy WP. A more useful measure is the finite-temperature Berry-curvature flux through a constant-energy sphere centered on the zero-energy WP:
This flux tends to zero as . Thus any finite temperature smooths the zero-energy WP contribution after phase averaging: the finite-temperature Chern number becomes continuous and no longer exhibits a quantized jump at the zero-energy WP.
The single-QD therefore gives a simple phase-resolved picture of thermal suppression. Because the suppression varies across phase space, however, the BZ-integrated finite-temperature Chern number can either decrease or increase depending on how regions of positive and negative Berry curvature are reweighted; see § 5 below. We also note that this monotonic suppression of the finite-temperature Berry curvature is specific to the single-QD model. In multiband systems, different terms in Eq. (19) can have opposite signs, so thermal reweighting can either suppress or enhance the finite-temperature Berry curvature.
Double-QD model: thermally induced same-sector contribution
To isolate the same-sector contribution, we use the four-level Hamiltonian from Eq. (6). Beyond the immediate vicinity of a finite-energy WP, it can be viewed as a generic two-ABS model (plus particle-hole partners) parameterized by and . It describes either an individual-ABS topological case, when somewhere in phase space, or a topologically trivial avoided-crossing case, when everywhere. We assume , excluding zero-energy WPs.
Because Eq. (6) is block diagonal in the two occupation sectors, only same-sector matrix elements contribute, and Eq. (19) reduces to
where is the Berry curvature of the lowest negative-energy ABS. Unlike Eq. (21), this contribution vanishes at and is generated by unequal thermal populations at . At fixed phase, it is nonmonotonic in , with asymptotic limits
For the first asymptotic expression, we additionally require the physically relevant condition . The finite-temperature Berry curvature vanishes both in the low-temperature limit, , and in the high-temperature limit, , where all four occupations approach one half.
Equation (24) applies to both topological crossings and trivial avoided crossings. At the same time, near a finite-energy WP in the individual-ABS topological regime, , substituting the linearized parameters from Eq. (7) gives
The expression scales as for and as for . As for a zero-energy WP, the finite-temperature Berry curvature is singular at the crossing, although the thermally active region shrinks at low temperature. The corresponding finite-temperature Berry-curvature flux through an energy sphere centered on the finite-energy WP is finite:
where, for simplicity, we consider an untilted finite-energy WP. The finite-temperature Berry-curvature flux vanishes in both the low- and high-temperature limits. Consequently, the finite-temperature Chern number has no quantized jump associated with a finite-energy WP at any temperature.
These results show that same-sector thermal reweighting can generate a finite-temperature Berry curvature that is strictly absent at . Because this response is highly nonuniform in phase space, however, the corresponding finite-temperature Chern number must be evaluated numerically.
Violation of the transconductance quantization
In this section, we investigate the thermal breakdown of transconductance quantization in four-terminal MTJJs. In terms of the finite-temperature Chern number, the breakdown manifests itself as
For the QD models considered here, the breakdown is dominated by thermal suppression of the occupied–unoccupied contribution.
We evaluate Eqs. (19) and (20) numerically for the symmetric single-QD and normal-coupled double-QD models. Figure 5(a) and Figure 5(d) show in these cases, respectively. Both models behave similarly: at low , deviations from quantization are small except near zero-energy WPs, where the excitation gap closes and even weak thermal occupation smooths the response. As increases, the deviation extends throughout the whole ground-state topological region.
Figure 5. Finite-temperature Chern number for the symmetric single-QD (top row) and symmetric normal-coupled double-QD (bottom row). Panels (a) and (d) show at the indicated temperatures; light-blue shading marks the ground-state topological regions. Parameters are , (top) and , (bottom). At , ; finite temperature smooths the zero-energy-WP steps and suppresses the plateau. Dashed lines at in (a,d) correspond to the topological cuts in (b,e), while dash-dotted lines at correspond to the trivial cuts in (c,f). Dotted lines in (a,d) delimit the nearly quantized regions. The topological cuts decrease monotonically with ; the trivial cuts are nonmonotonic, with maxima marked by black dots.
Figure 5(b),(Figure 5c) and (Figure 5e),(Figure 5f) show at fixed for the symmetric single-QD and normal-coupled double-QD models, respectively. In a ground-state topological region [Figure 5(b) and (Figure 5e) which correspond to the dashed vertical lines in Figure 5(a) and (Figure 5d), respectively], decreases monotonically because thermal occupation suppresses the dominant Berry curvature contribution; Appendix § 14.§ 1 shows the corresponding finite-temperature Berry-curvature maps. In a ground-state trivial region [Figure 5(c) and (Figure 5f) which correspond to the dash-dotted vertical lines in Figure 5(a) and (Figure 5d), respectively], positive- and negative-Berry-curvature contributions cancel at but are thermally reweighted at different rates. The resulting finite-temperature transconductance is finite and nonmonotonic and vanishes again at high temperature as the ABS occupations become equal.
Finite-temperature detection of individual-ABS topology
We next ask whether finite-temperature transconductance can reveal individual-ABS topology that is invisible in the ground-state Chern number. We use the antisymmetric SC-coupled double-QD model in a regime with finite-energy WPs but no zero-energy WPs, so although individual ABSs carry nonzero Chern numbers; the response is therefore governed by the thermally induced same-sector contribution. We then compare this regime with a topologically trivial state close to the topological transition to assess how specifically the finite-temperature transconductance identifies individual-ABS topology.
Finite-temperature Chern number of the individual-ABS topological state
Using Eqs. (19) and (20), we compute for the antisymmetric SC-coupled double-QD model. Figure 6(a) shows finite-temperature peaks precisely in the interval where the individual ABSs carry nonzero Chern numbers. The underlying finite-temperature Berry curvature is thermally generated and its phase-space maps are shown in Appendix § 14.§ 2.
Figure 6. Finite-temperature Chern number in an individual-ABS topological regime (top row) and a trivial regime (bottom row). Panels (a,b) correspond to the antisymmetric SC-coupled double-QD with , , and . In (a), the light-red interval marks nonzero individual-ABS Chern numbers; vertical lines indicate its boundaries and the dashed line at defines the cut used in (b). Thermally induced peaks appear in in (a), with the corresponding nonmonotonic shown in (b). Panels (c,d) correspond to the symmetric normal-coupled double-QD in the trivial regime with and in (c). The dashed line at defines the cut used in (d), where is shown for several . Similar thermal peaks appear in (c), with a nonmonotonic dependence in (d); the peak magnitude decreases as the system is tuned away from the transition at .
At fixed inside this interval, Figure 6(b) shows a nonmonotonic with a maximum at finite temperature. Unlike the trivial-region maxima in Figure 5(c) and (Figure 5f), this maximum is not caused by unequal suppression of pre-existing regions of positive and negative Berry curvature. Instead, same-sector thermal reweighting generates finite-temperature Berry curvature with nonuniform phase-space weight; see Appendix § 14.§ 2. Thus individual-ABS topology produces two characteristic signatures in this model: peaks in and a nonmonotonic .
Individual-ABS topology vs. trivial topology
Thermally induced finite-temperature transconductance features do not by themselves imply nontrivial topology. To test their specificity, we compare them with a topologically trivial system that nevertheless has a nonzero phase-resolved Berry curvature distribution.
For comparison, we choose the symmetric normal-coupled double-QD model on the trivial side of its topological transition, [58]. Figure 6(c) and (Figure 6d) again show phase-dependent peaks of and a nonmonotonic , although all individual-ABS Chern numbers vanish. Appendix § 14.§ 3 shows the corresponding finite-temperature Berry-curvature maps. These peaks are generally weaker and decrease rapidly as is tuned farther into the trivial side of the transition, becoming negligible sufficiently far from the phase boundary.
Pronounced finite-temperature transconductance peaks are therefore not a unique diagnostic of nonzero individual-ABS Chern numbers. Phase-resolved measurements of the finite-temperature Berry curvature can, however, distinguish the two cases in these simple QD models despite their similar averaged finite-temperature transconductance; see Appendices § 14.§ 2 and § 14.§ 3.
Coexistence of ground-state and individual-ABS topology
Section 5 showed the thermal suppression of finite-temperature transconductance associated with ground-state topology (zero-energy WPs), whereas Sec. 6 showed thermally generated signatures of individual-ABS topology (finite-energy WPs). We now consider the antisymmetric SC-coupled double-QD in regimes where both types of WPs coexist.
Figures 7(a)–(c) show the ground-state and individual-ABS Chern numbers for three parameter sets. The ground-state and individual-ABS topological intervals are either separated [Figure 7(a)] or overlap [Figure 7(b) and (Figure 7c)], with different individual-ABS Chern number patterns in the two overlapping cases.
Figure 7. Coexisting ground-state and individual-ABS topology in the antisymmetric SC-coupled double-QD model with . Ground-state, individual-ABS, and overlapping topological regions are shaded light blue, light red, and light purple, respectively; dashed lines mark the boundaries of the individual-ABS topological regions. Panels (a)–(c) show (black), (blue), and (red), while panels (d)–(f) show . Panels (a,d) use and ; panels (b,e), and ; and panels (c,f), and . In (a,d), the two topological intervals are separated; in (b,e) and (c,f), they overlap. Thermal individual-ABS contributions appear separately in (d), as a peak on the suppressed ground-state response in (e), and as a dip in (f).
The corresponding finite-temperature Chern numbers are shown in Figure 7(d)–Figure 7(f). When the intervals are separated [Figure 7(d)], the two thermal signatures are also separated: decreases in the ground-state topological interval, while finite-temperature peaks appear in the individual-ABS topological interval. When the intervals overlap [Figure 7(e) and (Figure 7f)], these trends superpose. Depending on the ordering of the individual-ABS Chern numbers, the finite-energy-WP-related contribution appears as either a peak [Figure 7(e)] or a dip [Figure 7(f)] on top of the overall thermal suppression of the ground-state response.
These results show that the finite-temperature response can be understood as a superposition of two physically distinct mechanisms: suppression of the contribution associated with ground-state topology and generation of a contribution associated with individual-ABS topology. Their relative sign and phase-space overlap determine whether the latter appears as a peak or a dip in the total response.
Discussion
Strength of the temperature-induced effects
The preceding sections identified both phase-resolved (§ 4.3) and phase-averaged (§ 5–§ 7) thermal effects. We now discuss their magnitude.
Temperature can strongly modify the phase-resolved response. In the single-QD model, strongly suppresses the finite-temperature Berry curvature, whereas near a finite-energy WP even a small temperature can generate a large finite-temperature Berry curvature. The phase-resolved response can therefore show either pronounced suppression or enhancement, see Appendix § 14.
The BZ-averaged effect can also be large, as the violation of quantization in § 5 demonstrates. The thermally generated signal associated with individual-ABS topology is smaller in our examples: its typical maximum is . This is not a fundamental bound; it reflects the detailed ABS dispersion of the chosen model. A larger response would require a broad phase-space region in which one relevant ABS is thermally active while the other remains effectively unoccupied. In this case, the finite-temperature Chern number could reach .
Reconstruction of the individual-ABS Chern numbers from the finite-temperature transconductance
The experimentally relevant inverse problem is whether finite-temperature transconductance measurements can reconstruct ABS topology. At , the averaged transconductance directly measures the ground-state Chern number [43]. At low temperature and sufficiently far from a zero-energy WP, this quantization remains a good approximation. At higher temperature, the sharp Chern number steps are smoothed, but their locations can still be inferred from the crossover of and from its characteristic temperature dependence.
Reconstructing individual-ABS Chern numbers is less direct. As shown in § 6.2, thermally induced peaks also occur on the trivial side near a topological transition. Their amplitude decreases as the system is tuned away from the transition, so a pronounced finite-temperature transconductance feature signals either proximity to a transition or topological ABS bands but does not uniquely determine the individual-ABS Chern numbers.
The ambiguity increases when several resonant ABSs contribute. In the antisymmetric SC-coupled double-QD model, zero-energy WPs and finite-energy WPs remain distinguishable because their phase intervals and temperature dependences can be tracked separately (§ 7), whereas generic multiband junctions, in principle, may produce similar finite-temperature transconductance curves from different microscopic spectra. Finite-temperature transconductance should therefore be viewed as a sensitive probe: it robustly identifies ground-state topology and highlights phase regions consistent with nontrivial individual-ABS structure, but additional information is required for an unambiguous individual-ABS topological assignment.
Alternative measurement protocols
Because the BZ-averaged finite-temperature transconductance does not uniquely determine individual-ABS Chern numbers, it is most useful in combination with phase-resolved and spectroscopic probes. The finite-temperature Berry-curvature maps in Appendices D.2 and D.3 distinguish, for the present models, thermally generated same-sector response which is a characteristic thermal feature of the individual-ABS topology from unequal suppression of pre-existing Berry curvature which is a characteristic thermal feature of the trivial or ground-state topology. However, this distinction need not remain unique in a more complicated multiband case. Finite-temperature transconductance can therefore first identify promising control-phase intervals. Tunneling spectroscopy [59, 62] can then test for finite-energy ABS crossings, while microwave spectroscopy provides a complementary check because the transitions at , , and merge at . The protocols of Refs. [50, 51] can additionally reconstruct the Berry curvature of a selected ABS from transition matrix elements, providing an independent test of the individual-ABS topology.
Conclusions
We studied the finite-temperature transconductance of four-terminal MTJJs with topological Andreev spectra. Their synthetic topology is controlled by WPs in SC-phase space: zero-energy WPs change the ground-state Chern number, whereas finite-energy WPs redistribute Chern numbers among individual ABSs without changing the ground-state sum. Using effective single-QD and double-QD models, we identified regimes with zero-energy WPs, finite-energy WPs, and their coexistence; the antisymmetric SC-coupled double-QD with both normal hopping and nonlocal SC coupling is the minimal model used here to realize robust finite-energy crossings and nontrivial individual-ABS Chern numbers.
We derived the finite-temperature transconductance using linear-response theory. Thermal occupation has two consequences: it suppresses contributions connecting states on opposite sides of the Fermi level and activates contributions between states in the same occupation sector. The first mechanism manifests itself in the breakdown of the exact transconductance quantization, while the second generates a finite response near finite-energy WPs even when the ground-state Chern number is zero.
For the single-QD and normal-coupled double-QD models, quantization remains accurate when is small compared with the relevant ABS energies, except near zero-energy WPs where the gap closes. In ground-state topological regions, decreases with temperature; in trivial regions, unequal thermal reweighting can produce a nonmonotonic finite response.
For individual-ABS topology, the antisymmetric SC-coupled double-QD develops finite-temperature peaks in within the phase interval bounded by finite-energy WPs, and a nonmonotonic temperature dependence. Similar features can arise in a topologically trivial model close to a transition, so the BZ-averaged finite-temperature transconductance is not by itself a unique individual-ABS topology diagnostic. At the same time, phase-resolved finite-temperature response measurements can help distinguish between these two scenarios.
When zero-energy WPs and finite-energy WPs coexist, their thermal signatures superpose as suppression of the ground-state response together with peaks or dips associated with individual-ABS topology. These results establish finite temperature both as a limitation on quantized transconductance and as a practical source of otherwise hidden information about the topology of Andreev spectra.
Acknowledgements
We thank Daniel Bobok, Gustavo Diniz, Joren Harms, Michael Hein, Tomáš Novotný, Aleksandr Svetogorov, Peter Zalom, and Martin Žonda for useful discussions.
Funding information We acknowledge support by the DAAD PPP (Projekt-ID: 57753337) and the Deutsche Forschungsgemeinschaft (DFG; German Research Foundation) by SFB 1432 (Project No. 425217212).
Effective Hamiltonians of QD models
Derivation scheme
We consider single-level QDs, indexed by , coupled to SC leads, indexed by ; see Figure 8. We use the Green’s function technique to integrate out SC leads and derive the effective BdG Hamiltonian for the resonant ABSs [50, 51, 58].
Figure 8. Generic effective QD model for an MTJJ. The SC leads have phases (), while the resonant ABSs are represented by single-level QDs with on-site energies (). Dot couples to lead with amplitude ; dots and may be coupled by normal hopping , and SC leads and may be directly coupled by .
In the Nambu representation, the full BdG Hamiltonian has the block form
where is dot block, is SC lead block, and is dot-leads block. We use for Pauli matrices in Nambu space. The blocks are given by
Here , is on-site dot energy, is the normal interdot hopping, is direct lead–lead hopping, and is the dot–lead tunneling amplitude; see Figure 8. We assume real, spin-preserving tunneling amplitudes.
Integrating out the SC leads gives the dot self-energy
where, to first order in weak direct lead–lead tunneling,
In the atomic limit, , the Green function of an isolated SC lead reduces to
The self-energy is then energy independent, and the effective dot Hamiltonian is
It contains the bare dot levels and hoppings together with proximity-induced pairing generated by virtual tunneling through the SC leads.
Effective Hamiltonians of the single-QD and double-QD models
We now apply Appendix § 11.§ 1 to the single-QD, normal-coupled double-QD, and SC-coupled double-QD models. The resulting effective Hamiltonians are summarized below.
Single-QD model
For the single-QD, one dot couples to four SC terminals, and neighboring terminals are directly coupled. Hence only for , with terminal indices understood modulo four. Keeping both lead–lead and dot–lead tunneling in the self-energy yields
Here , , and . Equation (A.10) reduces to Eq. (10) when and for all .
Normal-coupled double-QD model
The normal-coupled double-QD contains two dots: dot 1 couples to terminals 0 and 1, and dot 2 to terminals 2 and 3. The dots are directly coupled by . As in [58], the dot–lead self-energy gives the block Hamiltonian of Eq. (11). In the general case, , , and , with . The symmetric normal-coupled double-QD follows for and .
SC-coupled double-QD model
The SC-coupled double-QD model extends the normal-coupled double-QD by allowing the central terminals 1 and 2 to couple to both dots. The shared leads generate a phase-dependent nonlocal SC coupling in addition to the normal hopping . The effective Hamiltonian retains the block structure of Eq. (11), with , where and . The local pairings are and in Eq. (12). The antisymmetric model of the main text follows for , , and , with and .
WPs in different QD models
This appendix summarizes the conditions for zero- and finite-energy WPs in the single-QD and double-QD models.
Zero-energy WPs in the single-QD model
With only one positive-energy ABS, the single-QD can host zero-energy WPs but not finite-energy WPs. Zero-energy WPs require , i.e., three simultaneous trigonometric conditions . For a generic single-QD these conditions are solved numerically; in the symmetric model, symmetry allows an analytic criterion [50]. The result is .
WPs in double-QD models
Before specializing the double-QD model, we summarize the degeneracy conditions for a generic double-QD BdG Hamiltonian.
A double-QD has a BdG Hamiltonian with two particle-hole pairs, and , so its characteristic polynomial can be written as
with
A zero-energy WP requires
whereas a finite-energy WP requires
The coefficients and can be expressed in terms of the microscopic parameters by matching powers of in Eq. (B.1). The resulting formulas are lengthy, so below we give the normal-coupled double-QD limit and the purely SC-coupled limit which clarify why robust finite-energy WPs in our working model require both normal and SC interdot coupling.
Normal-coupled double-QD model
For the normal-coupled double-QD model, Eq. (B.3) becomes
The finite-energy crossing condition, Eq. (B.4), becomes
As shown in Ref. [58], Eq. (B.5) can be satisfied over a broad parameter range. The finite-energy crossing condition is much more restrictive and, in particular, requires . Thus, robust finite-energy WPs are excluded in the generic normal-coupled double-QD case considered in the main text, apart from such fine-tuned limits.
Purely SC-coupled double-QD model
For the purely SC-coupled limit, the zero-energy condition is
The finite-energy condition is
The finite-energy condition is again restrictive. For instance, it requires . As a result, satisfying Eq. (B.8) implies fine-tuning of the system’s parameters, whereas allowing both normal hopping and nonlocal SC coupling removes these fine-tuning constraints and produces finite-energy WPs over a broader parameter range, as used in the main text.
Linear response theory
This appendix gives the finite-temperature linear-response derivation used in § 4.
ABS susceptibility at finite temperature
First, we derive Eq. (16) from the Kubo formula. A phase variation enters the effective Hamiltonian as
where
is the current operator in lead . In frequency space, the Josephson relation gives
and therefore
Thus the ABS susceptibility in Eq. (15) is the current response to , or equivalently the phase-response kernel multiplied by .
To derive Eq. (16), we use the Matsubara technique followed by analytical continuation to real frequencies. We first recall the general Kubo response for an arbitrary operator . If the perturbation is
then the linear response of is determined by the imaginary-time correlator
where
Here is an arbitrary operator whose response is measured, while is the operator coupled to the external perturbation.
For the ABS susceptibility we take
Therefore the Kubo part of the ABS response is
In Matsubara-frequency representation this gives, for ,
The usual analytical continuation from nonzero Matsubara frequencies,
then gives Eq. (16) from the main text at .
Reproduction of the transconductance quantization at
Finally, we verify that the finite-temperature transconductance reduces to the quantized zero-temperature transconductance. The first-order term in frequency is obtained by expanding Eq. (16) with respect to :
Generally, it can be written in the form of Eq. (18) with the finite-temperature Berry curvature introduced by Eq. (19).
At zero temperature, , and therefore
Thus , and the transconductance becomes quantized, as in Eq. (14).
Finite-temperature Berry-curvature maps
This appendix shows representative finite-temperature Berry-curvature maps whose BZ integrals give the finite-temperature Chern number: the symmetric single-QD and normal-coupled double-QD models for ground-state topology, the antisymmetric SC-coupled double-QD for individual-ABS topology, and a topologically trivial normal-coupled double-QD close to its transition. These maps distinguish the two thermal mechanisms discussed in § 4.3.
Finite-temperature Berry curvature of symmetric single-QD and normal-coupled double-QD models
Figures 9 and 10 show the finite-temperature Berry curvature of the symmetric single-QD and normal-coupled double-QD models, respectively. As discussed in § 5, the thermal evolution differs between ground-state topological and trivial values of .
In the ground-state topological region [Figure 9(a)–(Figure 9c) and 10(a)–(c)], the Berry curvature integrates to . Increasing temperature predominantly suppresses the regions of positive Berry curvature, while negative contributions change more weakly. The resulting loss of positive weight produces the monotonic decrease of shown in Figure 5(b) and (Figure 5e).

Figure 9. Zero- and finite-temperature Berry-curvature maps for the symmetric single-QD model with and . Panels (a) and (d) show the zero-temperature Berry curvature ; panels (b), (c), (e), and (f) show at the temperatures indicated. The top row uses , inside the ground-state topological region [corresponding to Figure 5(b)], and shows predominantly thermal suppression of the regions of positive Berry curvature. The bottom row uses , in the trivial region [Figure 5(c)], where regions of positive and negative Berry curvature are suppressed at different rates.
In the ground-state trivial region [Figure 9(d)–(Figure 9f) and 10(d)–(f)], positive- and negative-Berry-curvature contributions cancel at , giving . At low temperature, the negative contribution is suppressed more strongly on average, so initially increases. At higher temperature, the relative suppression changes and passes through a maximum before decreasing, as in Figure 5(c) and (Figure 5f).
Although the single-QD and normal-coupled double-QD models show similar trends, their finite-temperature Berry-curvature maps differ. As discussed in § 4.3.1, Eq. (21) makes the single-QD response purely suppressive. By contrast, the normal-coupled double-QD model can show phase-resolved enhancement [the appearance of the light-blue region in Figure 10(f), which is absent in Figure 10(d)] because several ABS contributions with different signs are thermally reweighted.

Figure 10. Zero- and finite-temperature Berry-curvature maps for the symmetric normal-coupled double-QD model with and . Panels (a) and (d) show at ; panels (b), (c), (e), and (f) show at the indicated temperatures. The top row uses , inside the ground-state topological region [Figure 5(e)], where the dominant positive-Berry-curvature weight is thermally suppressed. The bottom row uses , in the trivial region [Figure 5(f)], where negative and positive regions are suppressed at different rates.
Finite-temperature Berry curvature of an antisymmetric SC-coupled double-QD model
Figure 11 shows the individual-ABS topological regime of the antisymmetric SC-coupled double-QD, corresponding to Figure 6(b). At , the Berry curvature is weak and integrates to . Finite temperature generates finite-temperature Berry curvature through the same-sector contribution [Figure 11(b)], which strengthens [Figure 11(c)] and then weakens at higher [Figure 11(d)]. This evolution produces the maximum and subsequent decay of in Figure 6(b).
Figure 11. Zero- and finite-temperature Berry-curvature maps for the antisymmetric SC-coupled double-QD model with , , , and , corresponding to Figure 6(b). Panel (a) shows at ; panels (b)–(d) show at increasing temperatures. The same-sector contribution produces the dominant temperature-induced change in the Berry curvature, which reaches a maximum and then decreases at higher temperature.
Finite-temperature Berry curvature of a topologically trivial normal-coupled double-QD model
Finally, Figure 12 shows the trivial normal-coupled double-QD corresponding to the black curve in Figure 6(d). At , regions of positive and negative Berry curvature cancel exactly, giving . At low , the negative contribution is suppressed more strongly, so initially increases; at higher , the relative suppression changes and passes through a maximum before decreasing. Thus the dominant mechanism is unequal reweighting of pre-existing Berry curvature, rather than the thermally generated same-sector finite-temperature Berry curvature characteristic of the individual-ABS topological case.

Figure 12. Zero- and finite-temperature Berry-curvature maps for the symmetric normal-coupled double-QD model in the trivial regime. Panel (a) shows at ; panels (b) and (c) show at the indicated temperatures. The model parameters are , , and , which corresponds to the black curve in Figure 6(d). The dominant effect is unequal thermal reweighting of the regions of negative and positive Berry curvature.
References
- [1]A. Bansil, H. Lin and T. Das, Colloquium: Topological band theory, Rev. Mod. Phys. 88, 021004 (2016), doi:10.1103/RevModPhys.88.021004.DOI
- [2]M. Z. Hasan and C. L. Kane, Colloquium: Topological insulators, Rev. Mod. Phys. 82, 3045 (2010), doi:10.1103/RevModPhys.82.3045.DOI
- [3]B. Yan and C. Felser, Topological materials: Weyl semimetals, Annu. Rev. Condens. Matter Phys. 8, 337 (2017), doi:10.1146/annurev-conmatphys-031016-025458.DOI
- [4]M. Sato and Y. Ando, Topological superconductors: A review, Rep. Prog. Phys. 80(7), 076501 (2017), doi:10.1088/1361-6633/aa6ac7.DOI
- [5]K. v. Klitzing, G. Dorda and M. Pepper, New method for high-accuracy determination of the fine-structure constant based on quantized Hall resistance, Phys. Rev. Lett. 45, 494 (1980), doi:10.1103/PhysRevLett.45.494.DOI
- [6]D. J. Thouless, M. Kohmoto, M. P. Nightingale and M. den Nijs, Quantized Hall conductance in a two-dimensional periodic potential, Phys. Rev. Lett. 49, 405 (1982), doi:10.1103/PhysRevLett.49.405.DOI
- [7]T. Ozawa and H. M. Price, Topological quantum matter in synthetic dimensions, Nat. Rev. Phys. 1(5), 349 (2019), doi:10.1038/s42254-019-0045-3.DOI
- [8]J. Argüello-Luengo, U. Bhattacharya, A. Celi, R. W. Chhajlany, T. Grass, M. Płodzień, D. Rakshit, T. Salamon, P. Stornati, L. Tarruell et al., Synthetic dimensions for topological and quantum phases, Commun. Phys. 7(1), 143 (2024), doi:10.1038/s42005-024-01636-3.
- [9]T. Kitagawa, E. Berg, M. Rudner and E. Demler, Topological characterization of periodically driven quantum systems, Phys. Rev. B 82, 235114 (2010), doi:10.1103/PhysRevB.82.235114.DOI
- [10]M. S. Rudner and N. H. Lindner, Band structure engineering and non-equilibrium dynamics in Floquet topological insulators, Nat. Rev. Phys. 2(5), 229 (2020), doi:10.1038/s42254-020-0170-z.DOI
- [11]A. B. Khanikaev, S. Hossein Mousavi, W.-K. Tse, M. Kargarian, A. H. MacDonald and G. Shvets, Photonic topological insulators, Nat. Mater. 12(3), 233 (2013), doi:10.1038/nmat3520.DOI
- [12]L. Lu, J. D. Joannopoulos and M. Soljačić, Topological photonics, Nat. Photonics 8(11), 821 (2014), doi:10.1038/nphoton.2014.248.DOI
- [13]V. Fatemi, A. R. Akhmerov and L. Bretheau, Weyl Josephson circuits, Phys. Rev. Res. 3, 013288 (2021), doi:10.1103/PhysRevResearch.3.013288.DOI
- [14]L. Peyruchat, J. Griesmar, J.-D. Pillet and Ç. Ö. Girit, Transconductance quantization in a topological Josephson tunnel junction circuit, Phys. Rev. Res. 3, 013289 (2021), doi:10.1103/PhysRevResearch.3.013289.
- [15]T. Herrig and R.-P. Riwar, Cooper-pair transistor as a minimal topological quantum circuit, Phys. Rev. Res. 4, 013038 (2022), doi:10.1103/PhysRevResearch.4.013038.DOI
- [16]Y. E. Kraus, Z. Ringel and O. Zilberberg, Four-dimensional quantum Hall effect in a two-dimensional quasicrystal, Phys. Rev. Lett. 111, 226401 (2013), doi:10.1103/PhysRevLett.111.226401.DOI
- [17]H. M. Price, O. Zilberberg, T. Ozawa, I. Carusotto and N. Goldman, Four-dimensional quantum Hall effect with ultracold atoms, Phys. Rev. Lett. 115, 195303 (2015), doi:10.1103/PhysRevLett.115.195303.DOI
- [18]M. Lohse, C. Schweizer, H. M. Price, O. Zilberberg and I. Bloch, Exploring 4D quantum Hall physics with a 2D topological charge pump, Nature 553(7686), 55 (2018), doi:10.1038/nature25000.DOI
- [19]O. Zilberberg, S. Huang, J. Guglielmon, M. Wang, K. P. Chen, Y. E. Kraus and M. C. Rechtsman, Photonic topological boundary pumping as a probe of 4D quantum Hall physics, Nature 553(7686), 59 (2018), doi:10.1038/nature25011.DOI
- [20]J. C. Cuevas and H. Pothier, Voltage-induced Shapiro steps in a superconducting multiterminal structure, Phys. Rev. B 75, 174513 (2007), doi:10.1103/PhysRevB.75.174513.DOI
- [21]M. Houzet and P. Samuelsson, Multiple Andreev reflections in hybrid multiterminal junctions, Phys. Rev. B 82, 060517(R) (2010), doi:10.1103/PhysRevB.82.060517.DOI
- [22]A. Freyn, B. Douçot, D. Feinberg and R. Mélin, Production of nonlocal quartets and phase-sensitive entanglement in a superconducting beam splitter, Phys. Rev. Lett. 106, 257005 (2011), doi:10.1103/PhysRevLett.106.257005.DOI
- [23]A. H. Pfeffer, J. E. Duvauchelle, H. Courtois, R. Mélin, D. Feinberg and F. Lefloch, Subgap structure in the conductance of a three-terminal Josephson junction, Phys. Rev. B 90, 075401 (2014), doi:10.1103/PhysRevB.90.075401.DOI
- [24]Y. Cohen, Y. Ronen, J.-H. Kang, M. Heiblum, D. Feinberg, R. Mélin and H. Shtrikman, Nonlocal supercurrent of quartets in a three-terminal Josephson junction, Proc. Natl. Acad. Sci. U.S.A. 115(27), 6991 (2018), doi:10.1073/pnas.1800044115.DOI
- [25]A. W. Draelos, M.-T. Wei, A. Seredinski, H. Li, Y. Mehta, K. Watanabe, T. Taniguchi, I. V. Borzenets, F. Amet and G. Finkelstein, Supercurrent flow in multiterminal graphene Josephson junctions, Nano Lett. 19(2), 1039 (2019), doi:10.1021/acs.nanolett.8b04330.DOI
- [26]J.-D. Pillet, V. Benzoni, J. Griesmar, J.-L. Smirr and Ç. Ö. Girit, Nonlocal Josephson effect in Andreev molecules, Nano Lett. 19(10), 7138 (2019), doi:10.1021/acs.nanolett.9b02686.DOI
- [27]G. V. Graziano, J. S. Lee, M. Pendharkar, C. J. Palmstrøm and V. S. Pribiag, Transport studies in a gate-tunable three-terminal Josephson junction, Phys. Rev. B 101, 054510 (2020), doi:10.1103/PhysRevB.101.054510.DOI
- [28]N. Pankratova, H. Lee, R. Kuzmin, K. Wickramasinghe, W. Mayer, J. Yuan, M. G. Vavilov, J. Shabani and V. E. Manucharyan, Multiterminal Josephson effect, Phys. Rev. X 10, 031051 (2020), doi:10.1103/PhysRevX.10.031051.DOI
- [29]E. G. Arnault, T. F. Larson, A. Seredinski, L. Zhao, S. Idris, A. McConnell, K. Watanabe, T. Taniguchi, I. Borzenets, F. Amet et al., Multiterminal inverse ac Josephson effect, Nano Lett. 21(22), 9668 (2021), doi:10.1021/acs.nanolett.1c03474.DOI
- [30]K.-F. Huang, Y. Ronen, R. Mélin, D. Feinberg, K. Watanabe, T. Taniguchi and P. Kim, Evidence for 4e charge of Cooper quartets in a biased multi-terminal graphene-based Josephson junction, Nat. Commun. 13(1), 3032 (2022), doi:10.1038/s41467-022-30732-7.DOI
- [31]G. V. Graziano, M. Gupta, M. Pendharkar, J. T. Dong, C. P. Dempsey, C. Palmstrøm and V. S. Pribiag, Selective control of conductance modes in multi-terminal Josephson junctions, Nat. Commun. 13(1), 5933 (2022), doi:10.1038/s41467-022-33682-2.DOI
- [32]S. Matsuo, J. S. Lee, C.-Y. Chang, Y. Sato, K. Ueda, C. J. Palmstrøm and S. Tarucha, Observation of nonlocal Josephson effect on double InAs nanowires, Commun. Phys. 5(1), 221 (2022), doi:10.1038/s42005-022-00994-0.DOI
- [33]M. Gupta, G. V. Graziano, M. Pendharkar, J. T. Dong, C. P. Dempsey, C. Palmstrøm and V. S. Pribiag, Gate-tunable superconducting diode effect in a three-terminal Josephson device, Nat. Commun. 14(1), 3078 (2023), doi:10.1038/s41467-023-38856-0.DOI
- [34]D. Z. Haxell, M. Coraiola, M. Hinderling, S. C. ten Kate, D. Sabonis, A. E. Svetogorov, W. Belzig, E. Cheah, F. Krizek, R. Schott et al., Demonstration of the nonlocal Josephson effect in Andreev molecules, Nano Lett. 23(16), 7532 (2023), doi:10.1021/acs.nanolett.3c02066.DOI
- [35]M. Coraiola, D. Z. Haxell, D. Sabonis, H. Weisbrich, A. E. Svetogorov, M. Hinderling, S. C. ten Kate, E. Cheah, F. Krizek, R. Schott et al., Phase-engineering the Andreev band structure of a three-terminal Josephson junction, Nat. Commun. 14(1), 6784 (2023), doi:10.1038/s41467-023-42356-6.DOI
- [36]S. Matsuo, T. Imoto, T. Yokoyama, Y. Sato, T. Lindemann, S. Gronin, G. C. Gardner, S. Nakosai, Y. Tanaka, M. J. Manfra et al., Phase-dependent Andreev molecules and superconducting gap closing in coherently-coupled Josephson junctions, Nat. Commun. 14(1), 8271 (2023), doi:10.1038/s41467-023-44111-3.DOI
- [37]M. Coraiola, A. E. Svetogorov, D. Z. Haxell, D. Sabonis, M. Hinderling, S. C. ten Kate, E. Cheah, F. Krizek, R. Schott, W. Wegscheider et al., Flux-tunable Josephson diode effect in a hybrid four-terminal Josephson junction, ACS Nano 18(12), 9221 (2024), doi:10.1021/acsnano.4c01642.DOI
- [38]C. G. Prosko, W. D. Huisman, I. Kulesh, D. Xiao, C. Thomas, M. J. Manfra and S. Goswami, Flux-tunable Josephson effect in a four-terminal junction, Phys. Rev. B 110, 064518 (2024), doi:10.1103/PhysRevB.110.064518.DOI
- [39]P. Virtanen and T. T. Heikkilä, Nonreciprocal Josephson linear response, Phys. Rev. Lett. 132, 046002 (2024), doi:10.1103/PhysRevLett.132.046002.DOI
- [40]S. A. Kahn, L. Stampfer, S. Marti-Sanchez, D. Olsteins, D. J. Carrad, T. Jansen, J. Johansson, J. Arbiol, P. Krogstrup and T. S. Jespersen, Phase controlled multi-terminal Josephson junction in ternary hybrid nanowire, arXiv:2511.04719 (2025), doi:10.48550/arXiv.2511.04719.DOI
- [41]S. Annabi, H. Riechert, K. Watanabe, T. Taniguchi, J. Griesmar, E. Arrighi, L. Bretheau and J.-D. Pillet, Fermion parity of an Andreev molecule probed by nonlocal Josephson effect, arXiv:2607.15786 (2026), doi:10.48550/arXiv.2607.15786.DOI
- [42]T. Yokoyama and Y. V. Nazarov, Singularities in the Andreev spectrum of a multiterminal Josephson junction, Phys. Rev. B 92, 155437 (2015), doi:10.1103/PhysRevB.92.155437.DOI
- [43]R.-P. Riwar, M. Houzet, J. S. Meyer and Y. V. Nazarov, Multi-terminal Josephson junctions as topological matter, Nat. Commun. 7(1), 11167 (2016), doi:10.1038/ncomms11167.DOI
- [44]E. Eriksson, R.-P. Riwar, M. Houzet, J. S. Meyer and Y. V. Nazarov, Topological transconductance quantization in a four-terminal Josephson junction, Phys. Rev. B 95, 075417 (2017), doi:10.1103/PhysRevB.95.075417.DOI
- [45]J. S. Meyer and M. Houzet, Nontrivial Chern numbers in three-terminal Josephson junctions, Phys. Rev. Lett. 119, 136807 (2017), doi:10.1103/PhysRevLett.119.136807.DOI
- [46]H.-Y. Xie, M. G. Vavilov and A. Levchenko, Topological Andreev bands in three-terminal Josephson junctions, Phys. Rev. B 96, 161406(R) (2017), doi:10.1103/PhysRevB.96.161406.DOI
- [47]H.-Y. Xie, M. G. Vavilov and A. Levchenko, Weyl nodes in Andreev spectra of multiterminal Josephson junctions: Chern numbers, conductances, and supercurrents, Phys. Rev. B 97, 035443 (2018), doi:10.1103/PhysRevB.97.035443.DOI
- [48]H.-Y. Xie and A. Levchenko, Topological supercurrents interaction and fluctuations in the multiterminal Josephson effect, Phys. Rev. B 99, 094519 (2019), doi:10.1103/PhysRevB.99.094519.DOI
- [49]E. V. Repin, Y. Chen and Y. V. Nazarov, Topological properties of multiterminal superconducting nanostructures: Effect of a continuous spectrum, Phys. Rev. B 99, 165414 (2019), doi:10.1103/PhysRevB.99.165414.DOI
- [50]R. L. Klees, G. Rastelli, J. C. Cuevas and W. Belzig, Microwave spectroscopy reveals the quantum geometric tensor of topological Josephson matter, Phys. Rev. Lett. 124, 197002 (2020), doi:10.1103/PhysRevLett.124.197002.DOI
- [51]R. L. Klees, J. C. Cuevas, W. Belzig and G. Rastelli, Ground-state quantum geometry in superconductor–quantum dot chains, Phys. Rev. B 103, 014516 (2021), doi:10.1103/PhysRevB.103.014516.DOI
- [52]Y. Chen and Y. V. Nazarov, Weyl point immersed in a continuous spectrum: An example from superconducting nanostructures, Phys. Rev. B 104, 104506 (2021), doi:10.1103/PhysRevB.104.104506.DOI
- [53]J. S. Meyer and M. Houzet, Conductance quantization in topological josephson trijunctions, Phys. Rev. B 103, 174504 (2021), doi:10.1103/PhysRevB.103.174504.DOI
- [54]H. Weisbrich, R. Klees, G. Rastelli and W. Belzig, Second Chern number and non-Abelian Berry phase in topological superconducting systems, PRX Quantum 2, 010310 (2021), doi:10.1103/PRXQuantum.2.010310.DOI
- [55]H.-Y. Xie, J. Hasan and A. Levchenko, Non-Abelian monopoles in the multiterminal Josephson effect, Phys. Rev. B 105, L241404 (2022), doi:10.1103/PhysRevB.105.L241404.DOI
- [56]H. Barakov and Y. V. Nazarov, Abundance of Weyl points in semiclassical multiterminal superconducting nanostructures, Phys. Rev. B 107, 014507 (2023), doi:10.1103/PhysRevB.107.014507.DOI
- [57]L. Peralta Gavensky, G. Usaj and C. A. Balseiro, Multi-terminal Josephson junctions: A road to topological flux networks, EPL 141(3), 36001 (2023), doi:10.1209/0295-5075/acb2f6.DOI
- [58]L. Teshler, H. Weisbrich, J. Sturm, R. L. Klees, G. Rastelli and W. Belzig, Ground state topology of a four-terminal superconducting double quantum dot, SciPost Phys. 15, 214 (2023), doi:10.21468/SciPostPhys.15.5.214.DOI
- [59]T. Antonelli, M. Coraiola, D. C. Ohnmacht, A. E. Svetogorov, D. Sabonis, S. C. ten Kate, E. Cheah, F. Krizek, R. Schott, J. C. Cuevas, W. Belzig, W. Wegscheider et al., Exploring the energy spectrum of a four-terminal Josephson junction: Toward topological Andreev band structures, Phys. Rev. X 15, 031066 (2025), doi:10.1103/qd3y-f912.DOI
- [60]D. C. Ohnmacht, V. Wilhelm, H. Weisbrich and W. Belzig, Non-Hermitian topology in multiterminal superconducting junctions, Phys. Rev. Lett. 134(15), 156601 (2025), doi:10.1103/PhysRevLett.134.156601.DOI
- [61]D. C. Ohnmacht, V. Wilhelm and W. Belzig, Reflectionless modes as a source of Weyl nodes in multiterminal Josephson junctions, arXiv:2503.10874 (2025), doi:10.48550/arXiv.2503.10874.DOI
- [62]W. Jung, S. Jin, S. Park, S.-H. Shin, K. Watanabe, T. Taniguchi, G. Y. Cho and G.-H. Lee, Tunneling spectroscopy of Andreev bands in multiterminal graphene-based Josephson junctions, Sci. Adv. 11(21), eads0342 (2025), doi:10.1126/sciadv.ads0342.DOI
- [63]S. Chakraborty, A. Mukhopadhyay, U. Khanna and S. Das, Synthetic flat bands, hierarchical topology, and phase-fluctuation-insensitive quantized transconductance in Josephson junctions, arXiv:2605.02095 (2026), doi:10.48550/arXiv.2605.02095.DOI
- [64]P. Zalom, G. Diniz, D. C. Ohnmacht and W. Belzig, Symmetry-induced Weyl nodes in interacting multi-terminal Josephson junctions, arXiv:2608.21200 (2026), doi:10.48550/arXiv.2608.21200.DOI
- [65]T. Fukui, Y. Hatsugai and H. Suzuki, Chern numbers in discretized Brillouin zone: Efficient method of computing spin Hall conductances, J. Phys. Soc. Jpn. 74(6), 1674 (2005), doi:10.1143/JPSJ.74.1674.DOI
- [66]P. D. Kurilovich, V. D. Kurilovich, V. Fatemi, M. H. Devoret and L. I. Glazman, Microwave response of an Andreev bound state, Phys. Rev. B 104, 174517 (2021), doi:10.1103/PhysRevB.104.174517.DOI








