betaFeedback

WorksPhysics and Astronomy

An Effective Theory for Hot Lines

Abstract

We develop a high-temperature effective theory for spatial conformal line defects in theories with thermal screening. The defect partition function admits a local geometric expansion, whose leading terms describe the effective tension and bending response of the line. Using a convergent bulk OPE for heavy-state defect matrix elements, we derive asymptotic relations for averaged products of defect one-point coefficients and bulk OPE coefficients in the regime 1≪Δχ≪Δ1/d1 \ll Δ_χ\ll Δ^{1/d}. We compute the leading EFT coefficients for a twisted free scalar and for the magnetic line at the O(N)\mathrm{O}(N) Wilson-Fisher fixed point, large-NN Gross–Neveu model and N=2\mathcal N = 2 Chern-Simons-matter theory. For the three-dimensional Ising model, Monte Carlo simulations yield a perimeter coefficient in good agreement with a Padé interpolation of our ε\varepsilon-expansion result.

Introduction and summary

Conformal field theories (CFTs) describe the universal behavior of systems at continuous phase transitions and, more generally, fixed points of renormalization-group flows [1, 2, 3, 4, 5]. Their correlation functions are encoded in the conformal data: scaling dimensions and operator product expansion (OPE) coefficients. Considerable progress has been made in determining and constraining these data through numerical and analytic bootstrap methods [6, 7, 8, 9, 10, 11, 12, 13, 14, 15].

Beyond local correlation functions, one can study finite-temperature observables, such as the free energy and thermal correlation functions. Although these are also determined by the conformal data, their dependence on the full spectrum and OPE coefficients makes them difficult to compute directly, motivating complementary approaches [16, 17]. Conversely, thermal observables provide access to asymptotic properties of conformal data, including the growth of the density of states described by Cardy-type formulas [18, 19, 20] and the behavior of heavy-state three-point coefficients [21, 22, 23].

A useful approach is to place the theory on a thermal background Sβ1×Md−1S_\beta^1 \times\mathcal{M}_{d-1}, where β=1/T\beta= 1/T is the circumference of the Euclidean time circle and Md−1\mathcal{M}_{d-1} is the spatial manifold. Thermal periodicity, encoded in the Kubo–Martin–Schwinger (KMS) condition, constrains correlation functions and provides the basis for thermal bootstrap methods [24, 25, 26, 27, 28, 29]. In the high-temperature limit, β\beta becomes small compared with the characteristic spatial scales, and locality allows the leading terms of the partition function to be expressed in terms of local geometric data [20, 30, 31, 32, 33].

Conformal defects introduce additional observables, such as defect partition functions and correlation functions, whose description requires data beyond those of the bulk CFT. These include the spectrum of defect operators and bulk-to-defect OPE coefficients [34]. Bootstrap, perturbative, and effective field theory methods have provided complementary results for conformal defects [35, 36, 37, 38, 39, 40, 41, 42, 43]. More recently, conformal defects have also been studied at finite temperature [44, 45, 46, 47, 48], but the relation between their thermal behavior and zero-temperature conformal data remains less understood.

In this paper, we develop a high-temperature effective theory for conformal line defects supported on spatial curves.1 We focus on the spherical geometry illustrated in Figure 1, where the defect lies at fixed Euclidean time rather than wrapping the thermal circle. At high temperature, the bulk admits an effective description in d−1d-1 dimensions. Provided the thermal response to the defect is screened, its contribution to the partition function can be organized in a local geometric expansion along D\mathcal{D}.2

Figure 1. Spatial line defect DθD_\theta supported on a latitude at polar angle θ\theta of the sphere SRd−1S_R^{d-1}, with Euclidean time compactified on Sβ1S_\beta^1.

log⁡Z[β,D]Z[β]=γ[D]+∫Dds[mD2πβ+β2π(t2KiKi+tRR2)+⋯ ].(1)\log\frac{Z[\beta,\mathcal{D}]}{Z[\beta]}=\gamma[\mathcal{D}]+\int_{\mathcal{D}} ds\left[\frac{m_{\mathcal{D}}}{2\pi\beta}+\frac{\beta}{2\pi}\left(t_2 K_i K^i+\frac{t_R}{R^2}\right)+\cdots\right]. \tag*{(1)}

Here, γ[D]\gamma[\mathcal{D}] denotes the temperature-independent contribution, while mDm_{\mathcal{D}} and t2t_2 control the effective tension and bending response of the line, respectively. tRt_R describes the combined ambient-curvature coefficient. The omitted terms involve higher-order geometric invariants, including contributions from the curvature of the spatial manifold.

Under the assumptions detailed in § 3, we further show that the thermal EFT determines the asymptotic behavior of averaged products of defect one-point coefficients and bulk OPE coefficients. The derivation relies on a bulk OPE representation of heavy-state defect matrix elements, building on the known convergence properties of Euclidean OPE expansions [55, 56]. We obtain

aχfOΔOΔχ‾∼eγ^mDΔχΓ(Δχ+1)(Δ−(d−1)fˉ)Δχ/d,(2)\overline{a_\chi f_{\mathcal{O}_\Delta\mathcal{O}_\Delta\chi}}\sim\frac{e^{\widehat{\gamma}}m_{\mathcal{D}}^{\Delta_\chi}}{\Gamma(\Delta_\chi+1)}\left(\frac{\Delta}{-(d-1)\bar{f}}\right)^{\Delta_\chi/d}, \tag*{(2)}

in the regime 1≪Δχ≪Δ1/d1\ll\Delta_\chi\ll\Delta^{1/d}. Here aχa_\chi is the defect one-point coefficient of an operator χ\chi of dimension Δχ\Delta_\chi, and fOΔOΔχf_{\mathcal{O}_\Delta\mathcal{O}_\Delta\chi} is its bulk OPE coefficient with two heavy operators of dimension Δ\Delta. We have also defined γ^=γ−log⁡gD\widehat{\gamma}=\gamma-\log g_{\mathcal{D}}, where gDg_{\mathcal{D}} is the zero-temperature defect expectation value, while fˉ\bar{f} denotes the coefficient of the leading high-temperature bulk free energy in the absence of the defect.

This result also admits a thermal interpretation under the eigenstate thermalization hypothesis (ETH). If the heavy states created by OΔ\mathcal{O}_\Delta are typical, their heavy-heavy-light OPE coefficients can be related to thermal one-point functions. Under these assumptions, we obtain up to kinematic factor

aχbχ‾≃eγ^mDΔχΓ(Δχ+1).\overline{a_\chi b_\chi}\simeq\frac{e^{\widehat{\gamma}}m_{\mathcal{D}}^{\Delta_\chi}}{\Gamma(\Delta_\chi+1)}.

where bχb_\chi denotes the thermal one-point coefficient of χ\chi.

We illustrate the effective field theory (EFT) in a twisted free scalar theory and compute its leading coefficients for the magnetic line at the O(N)\mathrm{O}(N) Wilson–Fisher fixed point in the ϵ\epsilon-expansion, the large NN Gross–Neveu model and the N=2\mathcal{N}=2 Chern–Simons matter theory. The latter is particular interesting since, differently from the others, the leading EFT coefficient mDm_{\mathcal{D}} is positive. We also study the case of the three-dimensional Ising model and determine the value of the leading EFT coefficient mDm_{\mathcal{D}} using Monte Carlo simulations and find good agreement with a Padé interpolation of our perturbative results. A recap of the results for mDm_{\mathcal{D}} in the various model is provided in Table 1.

ModelmDm_{\mathrm{D}}method
Antiperiodic Free Scalar−h2-h^2 0.346...Exact
O(NN) model in d=4−εd = 4 - \varepsiloneq. (72)Perturbative in ε\varepsilon
Ising model (d=3d = 3)−0.53±0.06-0.53 \pm0.06Monte Carlo
Ising model (d=3d = 3)∼−0.61\sim-0.61Padé extrapolation
Gross-Neveu at large NN−8.3512h2+O⁡(1/N)-8.3512 h^2 + \operatorname{O}(1/N)Large NN
N=2\mathcal{N} = 2 U(1)kU(1)_k Chern-Simons matter1.083k1.083kLarge kk

Table 1. Prediction for the leading EFT coefficient mDm_{\mathrm{D}} in various models. hh indicated the conformal coupling of the defect (when indicated the model enjoy a continuum of conformal defects varying the coupling hh).

The remainder of the paper is organized as follows. In § 2, we develop the effective theory in Equation (1) and discuss the physical interpretation of its leading coefficients. In § 3, we relate the thermal EFT to asymptotic conformal data and derive Equation (2). Finally, in § 4, we illustrate the EFT in a twisted free scalar theory, compute its leading coefficients for the magnetic line at the O(NN) Wilson–Fisher fixed point, the case of the Gross-Neveu model at large NN and the N=2\mathcal{N} = 2 Chern-Simons matter theory and the three-dimensional Ising model via Monte Carlo simulations, comparing the numerical results with perturbative ones.

Thermal effective theory for line defects

We consider a conformal field theory on R×SRd−1\mathbb{R} \times S_R^{d-1} in the presence of a conformal line defect supported on a circle of radius Rsin⁡θR \sin\theta. The circle lies on a fixed two-sphere SR2⊂SRd−1S_R^2 \subset S_R^{d-1}, with θ\theta denoting its polar angle. We introduce finite temperature by compactifying the Euclidean time direction on a circle of circumference β=1/T\beta= 1/T. The resulting geometry is Sβ1×SRd−1S_\beta^1 \times S_R^{d-1}, as illustrated in Figure 1.

In the high-temperature regime, β≪R\beta\ll R, the nonzero Matsubara modes can be integrated out, yielding an effective field theory in d−1d - 1 dimensions. We expect this EFT to simplify further in the presence of thermal screening. In particular, we assume that connected correlation functions in the presence of the defect decay exponentially at large spatial separations,

⟨O(x)O(0)D⟩c∼e−x/ξscr,(3)\langle\mathcal{O}(x)\mathcal{O}(0)\mathcal{D}\rangle_c \sim e^{-x/\xi_{\mathrm{scr}}}, \tag*{(3)}

where O\mathcal{O} is a local bulk operator, xx denotes the spatial separation, and ξscr\xi_{\mathrm{scr}} is the characteristic screening length. The correlator is understood to be normalized by the defect expectation value. When the characteristic length scale of the defect is much larger than the screening length, and no additional long-range contributions to the defect free energy are present, we expect the effective theory to be governed by local geometric invariants of the defect embedding. For the circular defect considered here, this requires

Rsin⁡(θ)≫ξscr.(4)R \sin(\theta) \gg\xi_{\mathrm{scr}}. \tag*{(4)}

For more general curves, we also require that segments well separated along the defect do not approach each other within the screening length. Under these assumptions, we write down the effective action for a generic smooth spatial defect, independently of its precise shape. More precisely, on the round spatial sphere, the logarithm of the defect partition function admits the local derivative expansion

log⁡(Z[β,D]Z[β])=γ[D]+∫Dds[mD2πβ+β2π(t2KiKi+tRR2)+β3(t4,1(KiKi)2+t4,2(∇sKi)(∇sKi)+t4,3R2KiKi+t4,4R4)+⋯ ].(5)\log\left(\frac{Z[\beta,\mathcal{D}]}{Z[\beta]}\right)=\gamma[\mathcal{D}]+\int_{\mathcal{D}} \mathrm{d}s\left[\frac{m_{\mathcal{D}}}{2\pi\beta}+\frac{\beta}{2\pi}\left(t_2K_iK^i+\frac{t_R}{R^2}\right)+\beta^3\left(t_{4,1}(K_iK^i)^2+t_{4,2}(\nabla_sK_i)(\nabla_sK^i)+\frac{t_{4,3}}{R^2}K_iK^i+\frac{t_{4,4}}{R^4}\right)+\cdots\right]. \tag*{(5)}

Here, Z[β,D]Z[\beta,\mathcal{D}] and Z[β]Z[\beta] are the thermal partition functions with and without the defect, and ds\mathrm{d}s is the proper length element along D\mathcal{D}. The vector KiK^i is the curvature of the line within the spatial sphere, and ∇s\nabla_s is the corresponding normal-bundle covariant derivative. For a latitude Dθ\mathcal{D}_\theta, the length is L=2πRsin⁡(θ)L=2\pi R\sin(\theta) and KiKi=cot⁡2(θ)/R2K_iK^i=\cot^2(\theta)/R^2. The coefficients mDm_{\mathcal{D}}, t2t_2, tRt_R, and t4,at_{4,a} are dimensionless and play the following roles:

  • The term γ[D]\gamma[\mathcal{D}] is independent of temperature and includes the normalization dependence of the defect.

  • The coefficient mDm_{\mathcal{D}} multiplies the line length and is therefore the perimeter coefficient. Its leading contribution per unit length is

1L[log⁡(Z[β,D]Z[β])−γ[D]]=mD2πβ+⋯(6)\frac{1}{L}\left[\log\left(\frac{Z[\beta,\mathcal{D}]}{Z[\beta]}\right)-\gamma[\mathcal{D}]\right]=\frac{m_{\mathcal{D}}}{2\pi\beta}+\cdots \tag*{(6)}

The corresponding excess free energy per unit length has the opposite sign.

  • The coefficient t2t_2 measures the response to bending after the perimeter contribution is accounted for, while tRt_R measures the response to ambient curvature. At the equator, the bending term vanishes but the ambient-curvature term remains.

  • At order β3\beta^3, t4,1t_{4,1} and t4,2t_{4,2} govern quartic-curvature and curvature-gradient terms, while t4,3t_{4,3} and t4,4t_{4,4} govern mixed and purely ambient-curvature terms.

In the locally flat limit, the terms involving R−2R^{-2} vanish; for a smooth line whose curvature radius is much larger than β\beta and the screening length, t2t_2 gives the leading shape correction, while the β3\beta^3 terms are suppressed. § 4 uses this limit to determine mDm_{\mathcal{D}} and t2t_2, while § 3 uses mDm_{\mathcal{D}} to constrain asymptotic conformal data under the assumptions stated there.

Asymptotic conformal data from the thermal EFT

In this section, we use the thermal EFT to derive asymptotic constraints on zero-temperature conformal data. We first express the defect partition function as a thermal trace and determine the asymptotic behavior of defect matrix elements in heavy states. We then use a convergent bulk OPE representation of primary-state matrix elements to constrain averaged products of defect one-point coefficients and bulk OPE coefficients.

High-energy defect matrix elements

The defect in our setup, shown in Figure 1, can be inserted into the thermal trace over the Hilbert space on the spatial sphere:

Z[β,Dθ]=∑ne−βΔn/R⟨n∣Dθ∣n⟩,(7)Z[\beta,D_\theta]=\sum_n e^{-\beta\Delta_n/R}\langle n|D_\theta|n\rangle, \tag*{(7)}

where Δn\Delta_n denotes the scaling dimension of the state ∣n⟩|n\rangle, and the sum includes both primary states and their descendants. To study the high-energy asymptotics, it is convenient to express this trace in terms of the density of all states:

Z[β,Dθ]=∫dΔ ρall(Δ)⟨Δ∣Dθ∣Δ⟩‾alle−βΔ/R.(8)Z[\beta,D_\theta]=\int d\Delta\,\rho_{\mathrm{all}}(\Delta)\overline{\langle\Delta|D_\theta|\Delta\rangle}_{\mathrm{all}}e^{-\beta\Delta/R}. \tag*{(8)}

Here, ρall(Δ)=eSall(Δ)\rho_{\mathrm{all}}(\Delta)=e^{S_{\mathrm{all}}(\Delta)} is the density of states, and the overline denotes an average over all states with scaling dimension near Δ\Delta including both primaries and descendants. The thermal trace converges for β>0\beta>0, while the thermal EFT derived in § 2 applies at high temperature, provided the defect is much larger than the screening length. In this regime, it predicts

log⁡(Z[β,Dθ])=−fRd−1βd−1+γ+mDRβsin⁡(θ)+…,(9)\log\left(Z[\beta,D_\theta]\right)=-\frac{fR^{d-1}}{\beta^{d-1}}+\gamma+\frac{m_D R}{\beta}\sin(\theta)+\ldots, \tag*{(9)}

where f<0f<0 is the bulk free-energy coefficient.

For comparison, the partition function without the defect is

Z[β]=∫dΔ ρall(Δ)e−βΔ/R,(10)Z[\beta]=\int d\Delta\,\rho_{\mathrm{all}}(\Delta)e^{-\beta\Delta/R}, \tag*{(10)}

with the high-temperature expansion

log⁡(Z[β])=−fRd−1βd−1+….(11)\log\left(Z[\beta]\right)=-\frac{fR^{d-1}}{\beta^{d-1}}+\ldots. \tag*{(11)}

The leading term determines the leading heavy-state entropy; subleading corrections and further applications are discussed in [20]. We denote by γrel\gamma_{\mathrm{rel}} the constant term in log⁡[Z[β,Dθ]/Z[β]]\log[Z[\beta,D_\theta]/Z[\beta]]; it equals γ\gamma if no constant bulk term has been omitted from (11).

To extract data of primary states, we must first organize the trace into conformal multiplets. Let q=e−β/Rq=e^{-\beta/R} and let pp labels a primary of dimension Δp\Delta_p and spin JpJ_p. The exact defect trace can be written as

Z[β,Dθ]=∑pqΔpFpD(q,θ),FpD(q,θ):=q−ΔpTr⁡p(qDDθ),(12)Z[\beta,D_\theta]=\sum_p q^{\Delta_p}\mathcal{F}^{D}_p(q,\theta),\qquad\mathcal{F}^{D}_p(q,\theta):=q^{-\Delta_p}\operatorname{Tr}_p\left(q^{D}D_\theta\right), \tag*{(12)}

where Tr⁡p\operatorname{Tr}_p operates on the conformal multiplet associated to the primary operator labeled by pp: the defect thermal block FpD\mathcal{F}^{D}_p includes every descendant of pp. For a generic long multiplet, the corresponding unrefined character is qΔpdim⁡(Jp)/(1−q)dq^{\Delta_p}\dim(J_p)/(1-q)^d. Define Mp(θ)M_p(\theta) as the trace of DθD_\theta over the primary spin multiplet, divided by dim⁡(Jp)\dim(\mathcal{J}_p). For the heavy multiplets contributing at the inverse-Laplace saddle, the defect thermal block is expected to obey

FpD(q,θ)≃dim⁡(Jp)(1−q)dMp(θ).(13)\mathcal{F}^{D}_{p}(q,\theta) \simeq\frac{\dim(\mathcal{J}_p)}{(1-q)^d}M_p(\theta). \tag*{(13)}

This holds uniformly as q→1q \to1 in the angular regime used below. Writing

P0(q)=∑pdim⁡(Jp)qΔp,PD(q,θ)=∑pdim⁡(Jp)Mp(θ)qΔp,\mathcal{P}_0(q) = \sum_p \dim(\mathcal{J}_p)q^{\Delta_p}, \qquad\mathcal{P}_D(q,\theta) = \sum_p \dim(\mathcal{J}_p)M_p(\theta)q^{\Delta_p},

we then have

Z[β]≃(1−q)−dP0(q),Z[β,Dθ]≃(1−q)−dPD(q,θ).(14)Z[\beta] \simeq(1-q)^{-d}\mathcal{P}_0(q), \qquad Z[\beta,D_\theta] \simeq(1-q)^{-d}\mathcal{P}_D(q,\theta). \tag*{(14)}

An inverse Laplace transform of (11), evaluated by the saddle-point method, gives the Cardy-type asymptotics

β∗R=(−(d−1)fΔ)1/d,(15)\frac{\beta_*}{R} = \left(\frac{-(d-1)f}{\Delta}\right)^{1/d}, \tag*{(15)}
Sall(Δ)=dd−1(−(d−1)f)1/dΔ(d−1)/d.(16)S_{\mathrm{all}}(\Delta) = \frac{d}{d-1}\left(-(d-1)f\right)^{1/d}\Delta^{(d-1)/d}. \tag*{(16)}

As Δ→∞\Delta\to\infty, the saddle approaches the high-temperature limit, β∗/R→0\beta_*/R \to0. The primary density has the same leading exponential growth: for long multiplets, ρprim(Δ)∼(β∗/R)dρall(Δ)\rho_{\mathrm{prim}}(\Delta) \sim(\beta_*/R)^d\rho_{\mathrm{all}}(\Delta), so removing descendants changes only the power-law prefactor.

More precisely, define the primary density and the defect-weighted primary density by

ρprim(Δ)=∑pdim⁡(Jp)δ(Δ−Δp),(17)\rho_{\mathrm{prim}}(\Delta) = \sum_p \dim(\mathcal{J}_p)\delta(\Delta-\Delta_p), \tag*{(17)}
ρprim(Δ)M‾prim(Δ,θ)=∑pdim⁡(Jp)Mp(θ)δ(Δ−Δp).(18)\rho_{\mathrm{prim}}(\Delta)\overline{M}_{\mathrm{prim}}(\Delta,\theta) = \sum_p \dim(\mathcal{J}_p)M_p(\theta)\delta(\Delta-\Delta_p). \tag*{(18)}

By (14), these densities are obtained by inverse Laplace transforming (1−q)dZ[β](1-q)^dZ[\beta] and (1−q)dZ[β,Dθ](1-q)^dZ[\beta,D_\theta], respectively. For d>2d>2, the defect term is subleading to the bulk saddle-point action, and the common character factor cancels in their ratio. In the small-angle regime β∗/R≪sin⁡θ≪1\beta_*/R \ll\sin\theta\ll1 used below, this gives

M‾prim(Δ,θ)≃eγrel+A(Δ)sin⁡θ,(19)\overline{M}_{\mathrm{prim}}(\Delta,\theta) \simeq e^{\gamma^{\mathrm{rel}}+A(\Delta)\sin\theta}, \tag*{(19)}

where

A(Δ)=mDRβ∗=mD(Δ−(d−1)f)1/d.(20)A(\Delta) = \frac{m_D R}{\beta_*} = m_D\left(\frac{\Delta}{-(d-1)f}\right)^{1/d}. \tag*{(20)}

At fixed θ\theta, the leading term A(Δ)sin⁡θA(\Delta)\sin\theta still controls the logarithm, but in d=3d=3 the shift of the thermal saddle can affect the order-one prefactor.

Bulk OPE and asymptotic conformal data

We now apply the bulk OPE to the matrix element of an individual primary, before averaging over primary states. For the explicit scalar OPE below, we take the heavy operator Op\mathcal{O}_p to be a scalar primary of dimension Δp≃Δ\Delta_p \simeq\Delta. The unrefined trace in (7) also contains spinning primaries; using (19) for the scalar-primary average therefore requires a scalar-spin projection whose defect-to-bulk ratio has the same mDsin⁡θ/tm_D \sin\theta/t term and, for the prefactor below, the same γrel\gamma_{\mathrm{rel}}, or an independent treatment of spinning primaries. We make this additional assumption in the following matching. At first sight, the matrix element ⟨p∣Dθ∣p⟩\langle p|\mathcal{D}_\theta|p\rangle does not appear to admit a bulk OPE expansion. In the corresponding flat-space configuration, the defect lies between the two insertions of Op\mathcal{O}_p. However, a suitable conformal inversion maps the straight defect to a circle, leaving the insertions in a common region where the bulk OPE converges, as illustrated in Figure 2. The resulting bulk OPE involves one-point functions of local operators in the presence of the defect, whose form is fixed by the preserved conformal symmetry up to their coefficients. Normalizing by gD=⟨0∣Dθ∣0⟩g_D=\langle0|\mathcal{D}_\theta|0\rangle and denoting the normalized defect one-point coefficient by aχa_\chi, we obtain

Figure 2. A conformal inversion maps the straight line defect to a circle. In the transformed configuration, the two bulk insertions of a scalar primary lie in a region where the bulk OPE converges.

⟨p∣Dθ∣p⟩gD=∑χaχfOpOpχ2ΔχBχ(θ).(21)\frac{\langle p|\mathcal{D}_\theta|p\rangle}{g_D} = \sum_\chi a_\chi f_{\mathcal{O}_p\mathcal{O}_p\chi}2^{\Delta_\chi}\mathcal{B}_\chi(\theta). \tag*{(21)}

Here fOpOpχf_{\mathcal{O}_p\mathcal{O}_p\chi} is the bulk OPE coefficient and Bχ(θ)\mathcal{B}_\chi(\theta) is the corresponding conformal block. Although these blocks are not known in closed form in general dimensions, their large-Δχ\Delta_\chi behavior is known [56, 57]:

Bχ(θ)∼TJχrΔχ(1−r2)3−d2(1+r2)−32.(22)\mathcal{B}_\chi(\theta)\sim\mathcal{T}_{J_\chi}r^{\Delta_\chi}(1-r^2)^{\frac{3-d}{2}}(1+r^2)^{-\frac{3}{2}}. \tag*{(22)}

Here r=tan⁡(θ/2)r=\tan(\theta/2), while TJχ=CJχ(0)\mathcal{T}_{J_\chi}=\mathcal{C}_{J_\chi}(0) encodes the spin dependence, with CJχ\mathcal{C}_{J_\chi} denoting the angular polynomials for the exchanged symmetric traceless representations [56, 57]. For identical scalar external operators, only even spins contribute. The asymptotic form (22) must also remain valid in the double limit used below, where Δχ\Delta_\chi becomes large and rr becomes small.

The descendants of pp are already included in the defect thermal block (12); this is why the thermal inversion can be interpreted as a statement about primaries only after (13) is imposed. Let f‾Δ,χprim,0\overline{f}^{\mathrm{prim},0}_{\Delta,\chi} denote the average of fOpOpχf_{\mathcal{O}_p\mathcal{O}_p\chi} over scalar primaries with Δp\Delta_p in a narrow window around Δ\Delta, and set

cΔ,χ:=aχTJχf‾Δ,χprim,0.(23)c_{\Delta,\chi}:=a_\chi\mathcal{T}_{J_\chi}\overline{f}^{\mathrm{prim},0}_{\Delta,\chi}. \tag*{(23)}

Using the assumed scalar-primary version of (19) and retaining the leading term at small rr, we obtain

∑χcΔ,χ(2r)Δχ≃eγ^+Asin⁡θ,γ^=γrel−log⁡gD,(24)\sum_\chi c_{\Delta,\chi}(2r)^{\Delta_\chi}\simeq e^{\widehat{\gamma}+A\sin\theta},\qquad\widehat{\gamma}=\gamma_{\mathrm{rel}}-\log g_D, \tag*{(24)}

where A=A(Δ)A=A(\Delta) was defined in (20). The inverse transform in the angular variable constrains the OPE-weighted spectral density cΔ(δ):=∑χcΔ,χδ(δ−Δχ)c_\Delta(\delta):=\sum_\chi c_{\Delta,\chi}\delta(\delta-\Delta_\chi), understood after suitable smoothing in δ\delta; it does not isolate an individual OPE coefficient.

To extract the contribution at large dimension Δχ\Delta_\chi, we formally invert this expansion and evaluate the resulting integral by the saddle-point method. The saddle-point condition is

sin⁡(2θ∗)=2ΔχA.(25)\sin(2\theta_*)=\frac{2\Delta_\chi}{A}. \tag*{(25)}

For A>0A>0, the relevant real saddle lies on the branch θ∗<π/4\theta_*<\pi/4. In the regime Δχ≪A\Delta_\chi\ll A, it approaches

θ∗≃ΔχA.(26)\theta_*\simeq\frac{\Delta_\chi}{A}. \tag*{(26)}

The saddle-point approximation then gives

cΔ(Δχ)≃eγ^2πΔχ(eAΔχ)Δχ≃eγ^AΔχΓ(Δχ+1)=eγ^mDΔχΓ(Δχ+1)(Δ−(d−1)f)Δχ/d,(27)\begin{aligned} c_\Delta(\Delta_\chi)\simeq\frac{e^{\widehat{\gamma}}}{\sqrt{2\pi\Delta_\chi}}\left(\frac{eA}{\Delta_\chi}\right)^{\Delta_\chi}\simeq e^{\widehat{\gamma}}\frac{A^{\Delta_\chi}}{\Gamma(\Delta_\chi+1)} \\ &=\frac{e^{\widehat{\gamma}}m_D^{\Delta_\chi}}{\Gamma(\Delta_\chi+1)} \left(\frac{\Delta}{-(d-1)f}\right)^{\Delta_\chi/d}, \tag*{(27)} \end{aligned}

where the asymptotic relation concerns a suitably smoothed density in Δχ\Delta_\chi and assumes that cancellations among signed OPE weights do not invalidate the saddle estimate. The saddle lies within the regime of validity of the thermal EFT provided

max⁡(1,mD)≪Δχ≪A.(28)\max(1,m_D)\ll\Delta_\chi\ll A. \tag*{(28)}

Assuming that the EFT coefficients are of order O(1)O(1),3 the parametric window is 1≪Δχ≪Δ1/d1\ll\Delta_\chi\ll\Delta^{1/d}. The result (27) is a constraint on the averaged spectral density cΔ(Δχ)c_\Delta(\Delta_\chi), with TJχ\mathcal{T}_{J_\chi} included in its definition (23).

Note that what done before is rigorously speaking only valid for A>0A>0 which means for mD>0m_D>0. In the example below we will show that for some models the value of mDm_D is positive while in other cases, e.g. the Ising model, is negative. In the cases in which mDm_D is negative, the derivation of the asymptotic is less trivial: a direct analytic continuation of equation (27) would bring a complex phase of the form (−1)Δχ(-1)^{\Delta_\chi}4; this is clearly not physical and has to be interpreted in an average sense. A less disturbing way of presenting this result is to consider the absolute value in both sided: mathematically this is justified with the additional assumption that the thermal EFT proposed in this paper rule the partition function for ∣β∣→∞|\beta| \to\infty in the whole complex β\beta-plane.

Before concluding, we observe that another possible expansion expresses the defect itself in terms of local bulk operators [53]. This expansion applies when the defect is sufficiently small and has a finite radius of convergence, as can be seen in simple free-field examples at finite temperature. In our setup, the relevant small-defect regime is Rsin⁡θ≪βR\sin\theta\ll\beta, in contrast with the large-defect regime required by the thermal EFT. The two expansions therefore describe different limits of the defect partition function, making a direct comparison between them less straightforward.

Applications

In this section, we examine the scope and coefficients of the thermal line EFT in three examples. For a free scalar, periodic thermal boundary conditions leave an unscreened mode, while a Z2\mathbb{Z}_2-twisted trace gives a screened example whose perimeter and shape coefficients can be computed exactly. At the O(N)O(N) Wilson–Fisher fixed point, we compute the magnetic line’s perimeter coefficient mDm_D through order ε\sqrt{\varepsilon} and its leading bending coefficient t2t_2. Finally, Monte Carlo simulations of the critical three-dimensional Ising model provide an estimate of mDm_D, which we compare with a Padé interpolation of the N=1N=1 result constrained by the exact d=2d=2 value.

Free scalar field

We begin with the simplest example: a line defect in the free scalar theory in d=4d=4. Since the theory is Gaussian, the defect expectation value is computed exactly by a single propagator and the flat-space coefficients can be obtained in closed form. Unfortunately, with the standard thermal boundary conditions the defect is not screened, and the EFT does not apply. Screening, and with it the EFT, is restored by twisting the boundary conditions along the thermal circle by the Z2\mathbb{Z}_2 symmetry ϕ→−ϕ\phi\to-\phi.

Setup

Action. The bulk action and line insertion are given by

Sbulk=∫d4x g[12(∇ϕ)2+ξ42Rϕ2],ξ4=16(29)S_{\mathrm{bulk}}=\int d^4x\,\sqrt{g}\left[\frac{1}{2}(\nabla\phi)^2+\frac{\xi_4}{2}\mathcal{R}\phi^2\right],\qquad\xi_4=\frac{1}{6} \tag*{(29)}
D(C)=exp⁡[−h∫Cdϕ].(30)D(C)=\exp\left[-h\int_C d\phi\right]. \tag*{(30)}

Since Δϕ=1\Delta_\phi=1, the coupling hh is exactly marginal and D(C)D(C) is a conformal line defect for every value of hh. Because the theory is Gaussian, the logarithm of the defect expectation value is given exactly by a single propagator joining two source insertions,

Wβ[C]=log⁡⟨D(C)⟩β=h22∫Cdℓ∫Cdℓ′Gβ(x(ℓ),x(ℓ′)).(31)W_\beta[C]=\log\langle D(C)\rangle_\beta=\frac{h^2}{2}\int_C d\ell\int_C d\ell' G_\beta(x(\ell),x(\ell')). \tag*{(31)}

We use dimensional regularization with temperature-independent counterterms, as in the rest of this section. In particular, the power divergence at coincident points does not contribute.

Boundary conditions. We consider two choices of boundary conditions along the thermal circle,

ϕ(τ+β,x)=±ϕ(τ,x).(32)\phi(\tau+\beta,\mathbf{x})=\pm\phi(\tau,\mathbf{x}). \tag*{(32)}

The periodic choice computes the standard thermal trace. The antiperiodic choice inserts the Z2\mathbb{Z}_2 generator g:ϕ→−ϕg:\phi\to-\phi in the trace, and computes

Wβ−[C]=log⁡Tr⁡(gD(C)e−βH)Tr⁡(ge−βH).(33)W_\beta^{-}[C]=\log\frac{\operatorname{Tr}(gD(C)e^{-\beta H})}{\operatorname{Tr}(ge^{-\beta H})}. \tag*{(33)}

We denote the periodic result by Wβ+[C]W_\beta^{+}[C]. The defect is odd under gg, so moving the twist across the line flips h→−hh\to-h. Since Wβ±[C]W_\beta^{\pm}[C] depends only on h2h^2, the position of the twist is immaterial. Now we will consider a circle CρC_\rho of radius ρ\rho in flat space. The integrals along the circle can be performed in closed form, giving

Wβ±[Cρ]=h2ρ2∑n=1∞(±1)nnβn2β2+4ρ2.(34)W_\beta^{\pm}[C_\rho]=h^2\rho^2\sum_{n=1}^{\infty}\frac{(\pm1)^n}{n\beta\sqrt{n^2\beta^2+4\rho^2}}. \tag*{(34)}

Periodic scalar

For periodic boundary conditions, the sum is dominated by n≲ρ/βn\lesssim\rho/\beta, and

Wβ+[Cρ]=h2ρ2β[log⁡(4ρβ)+γE+O(βρ)].(35)W_\beta^{+}[C_\rho]=\frac{h^2\rho}{2\beta}\left[\log\left(\frac{4\rho}{\beta}\right)+\gamma_{\mathrm{E}}+O\left(\frac{\beta}{\rho}\right)\right]. \tag*{(35)}

This logarithmic growth lies outside the local thermal EFT because the periodic static mode is unscreened. But it is not surprising since for periodic boundary conditions we expect an appearance of the gapless mode. The same computation applies to the setup of § 3, with the latitude DθD_\theta on Sβ1×SR3S_\beta^1\times S_R^3. Using the propagator on R×SR3\mathbb{R}\times S_R^3, we find

Wβ±[Dθ]=h2sin⁡2θ4∑n=1∞(±1)nsinh⁡(nβ2R)sinh⁡2(nβ2R)+sin⁡2θ.(36)W_\beta^{\pm}[D_\theta]=\frac{h^2\sin^2\theta}{4}\sum_{n=1}^{\infty}\frac{(\pm1)^n}{\sinh\left(\frac{n\beta}{2R}\right)\sqrt{\sinh^2\left(\frac{n\beta}{2R}\right)+\sin^2\theta}}. \tag*{(36)}

On the sphere, the conformal coupling gives the static mode a mass 1/R1/R, so the periodic sum converges. The logarithm is then cut off by the radius of the sphere,

log⁡Z[β,Dθ]Z[β]=h2Rsin⁡(θ)2β[log⁡(Rβ)+log⁡(4sin⁡(θ)1+sin⁡(θ))+γE]+O(βR).(37)\log\frac{Z[\beta,D_\theta]}{Z[\beta]}=\frac{h^2R\sin(\theta)}{2\beta}\left[\log\left(\frac{R}{\beta}\right)+\log\left(\frac{4\sin(\theta)}{1+\sin(\theta)}\right)+\gamma_{\mathrm{E}}\right]+O\left(\frac{\beta}{R}\right). \tag*{(37)}

In the limit θ→0\theta\to0 at fixed Rsin⁡(θ)R\sin(\theta), this reproduces (35).

Antiperiodic scalar

With antiperiodic boundary conditions, the images in (36) alternate in sign, and the harmonic series is replaced by a convergent alternating series,

Wβ−[C]L=h24πβ∑n=1∞(−1)nn=−h2log⁡24πβ.(38)\frac{W_{\beta}^{-}[C]}{L}=\frac{h^2}{4\pi\beta}\sum_{n=1}^{\infty}\frac{(-1)^n}{n}=-\frac{h^2\log2}{4\pi\beta}. \tag*{(38)}

Matching to (52), we obtain

mD=−h22log⁡2.(39)m_D=-\frac{h^2}{2}\log2. \tag*{(39)}

For antiperiodic boundary conditions we can even make more. Since Gβ−G_{\beta}^{-} decays exponentially, only points separated by ∣ℓ−ℓ′∣≲β\lvert\ell-\ell'\rvert\lesssim\beta contribute to (31) for a smooth curve. The full derivative expansion of (5) can then be obtained by expanding the distance between two points of the curve. Let ss be the proper length along CC, u=s′−su=s'-s, Ti=x˙iT^i=\dot{x}^i the unit tangent vector, and Ki=x¨iK^i=\ddot{x}^i the extrinsic-curvature vector. Then

∣x(s+u)−x(s)∣2=u2−KiKi12u4−KiK˙i12u5−(KiK¨i45+K˙iK˙i40)u6+O(u7),(40)\lvert x(s+u)-x(s)\rvert^2=u^2-\frac{K^iK^i}{12}u^4-\frac{K^i\dot{K}^i}{12}u^5-\left(\frac{K^i\ddot{K}^i}{45}+\frac{\dot{K}^i\dot{K}^i}{40}\right)u^6+O(u^7), \tag*{(40)}

where dots denote derivatives with respect to ss in the ambient space. We insert this into (31) and use K˙i=∇sKi−(KjKj)Ti\dot{K}^i=\nabla_sK^i-(K^jK^j)T^i. After integrating by parts along CC, this gives

Wβ−[C]=h2∫Cds[M0+M28KiKi+M4(3128(KiKi)2−1144(∇sKi)(∇sKi))+⋯ ].(41)W_{\beta}^{-}[C]=h^2\int_C\mathrm{d}s\left[M_0+\frac{M_2}{8}K^iK^i+M_4\left(\frac{3}{128}(K^iK^i)^2-\frac{1}{144}(\nabla_sK^i)(\nabla_sK^i)\right)+\cdots\right]. \tag*{(41)}

where the moments of the propagator are

M2k≡∫0∞dv v2kGβ−(v)=(−1)k+1η(1−2k)4πβ2k−1,(42)M_{2k}\equiv\int_0^\infty\mathrm{d}v\,v^{2k}G_{\beta}^{-}(v)=(-1)^{k+1}\frac{\eta(1-2k)}{4\pi}\beta^{2k-1}, \tag*{(42)}

and η(s)=∑n≥1(−1)n−1n−s\eta(s)=\sum_{n\geq1}(-1)^{n-1}n^{-s} is the Dirichlet eta function. For k=0k=0, the integral is defined in dimensional regularization. Explicitly, M0=−log⁡2/(4πβ)M_0=-\log2/(4\pi\beta), M2=β/(16π)M_2=\beta/(16\pi) and M4=β3/(32π)M_4=\beta^3/(32\pi).

Matching (41) to (5), we obtain

mD=−h22log⁡2,t2=h264,m_D=-\frac{h^2}{2}\log2,\qquad t_2=\frac{h^2}{64},
t4,1=3h24096π,t4,2=−h24608π.(43)t_{4,1}=\frac{3h^2}{4096\pi},\qquad t_{4,2}=-\frac{h^2}{4608\pi}. \tag*{(43)}

These results are exact in hh. Every term in (41) is an odd power of β\beta, so γ[D]=0\gamma[D]=0 up to corrections exponentially small in the size of the defect. The bending coefficient t2t_2 can also be computed from the general Gaussian formula t2=−πh28β2∫−∞∞dv v2G(v)t_2=-\frac{\pi h^2}{8\beta^2}\int_{-\infty}^{\infty}\mathrm{d}v\,v^2G(v).

In the language of § 3, the twisted trace weighs each state by its Z2\mathbb{Z}_2 charge,

Zg[β,Dθ]=∑ngne−βΔn/R⟨n∣Dθ∣n⟩.Z_g[\beta,D_\theta]=\sum_n g_n e^{-\beta\Delta_n/R}\langle n|D_\theta|n\rangle.

In the interacting examples below, no twist is needed: screening is generated dynamically by the thermal mass.

Magnetic line at the Wilson–Fisher fixed point

We consider the O(N)\mathrm{O}(N) Wilson–Fisher theory in d=4−εd=4-\varepsilon on Sβ1×SRd−1S^1_\beta\times S_R^{d-1}, with a magnetic line embedded in the spatial sphere at fixed Euclidean time. The goal is to compare explicit calculations in the regime ε≪1\varepsilon\ll1 to the effective action (5) in order to determine mDm_D and t2t_2.

Setup

Action. The bulk action and line insertion are given by

Sbulk=∫ddxg[12(∇ϕI)2+ξd2RϕIϕI+μελ4!(ϕIϕI)2],(44)S_{\mathrm{bulk}}=\int\mathrm{d}^d x\sqrt{g}\left[\frac{1}{2}(\nabla\phi^I)^2+\frac{\xi_d}{2}\mathcal{R}\phi^I\phi^I+\frac{\mu^\varepsilon\lambda}{4!}(\phi^I\phi^I)^2\right], \tag*{(44)}
D(C)=exp⁡[−με/2h∫Cdℓ ϕ1],(45)D(C)=\exp\left[-\mu^{\varepsilon/2}h\int_C\mathrm{d}\ell\,\phi^1\right], \tag*{(45)}

with I=1,…,NI=1,\ldots,N. Here, ξd\xi_d is the conformal curvature coupling, g=det⁡(gμν)g=\det(g_{\mu\nu}) is the determinant of the metric, and R\mathcal{R} is the scalar curvature of Sβ1×SRd−1S^1_\beta\times S_R^{d-1}, while dℓ\mathrm{d}\ell is the proper length element along CC. We set the renormalization scale to μ=1/β\mu=1/\beta and define

Wβ[C]=log⁡(⟨D(C)⟩β)=log⁡(Z[β,D(C)]Z[β]).(46)W_\beta[C]=\log\left(\langle D(C)\rangle_\beta\right)=\log\left(\frac{Z[\beta,D(C)]}{Z[\beta]}\right). \tag*{(46)}

Note that counterterms are temperature-independent and thus we can use the zero-temperature ones.

Fixed point and thermal mass. At the Wilson–Fisher magnetic-line fixed point, the couplings in our normalization obey

λ⋆=48π2N+8ε+O(ε2),(47)\lambda_\star=\frac{48\pi^2}{N+8}\varepsilon+O(\varepsilon^2), \tag*{(47)}
h⋆2=N+8+O(ε).(48)h_\star^2=N+8+O(\varepsilon). \tag*{(48)}

Since λ⋆=O(ε)\lambda_\star=O(\varepsilon), the thermal theory has separated scales. The zero-frequency mode acquires a mass of order ε/β\sqrt{\varepsilon}/\beta. Although the line at fixed Euclidean time sources all modes, its response at distances much larger than β\beta is governed by the zero mode. We define the static mode by

ϕ0I(x)=1β∫0βdτ ϕI(τ,x).(49)\phi_0^I(\boldsymbol{x})=\frac{1}{\beta}\int_0^\beta\mathrm{d}\tau\,\phi^I(\tau,\boldsymbol{x}). \tag*{(49)}

Integrating out the nonzero modes gives an effective (d−1)(d-1)-dimensional theory for ϕ0I(x)\phi_0^I(\boldsymbol{x}). Its line-sourced profile supplies the long-distance part of the perimeter coefficient in (5). The thermal mass of the bulk theory can be written at leading order as

m02=N+272β2λ⋆.(50)m_0^2=\frac{N+2}{72\beta^2}\lambda_\star. \tag*{(50)}

Here m0m_0 is the leading mass parameter of the reduced theory; fluctuations of the static field correct the physical screening mass at higher order.

To extract the perimeter coefficient of (5), we consider a portion of the line whose curvature radius is much larger than the screening length m0−1m_0^{-1}. For a latitude at angle θ\theta on the spatial sphere, this requires m0Rsin⁡(θ)≫1m_0 R\sin(\theta) \gg1. Imposing this condition before taking ε→0\varepsilon\to0 at fixed NN, this gives the hierarchy

β≪m0−1≪Rsin⁡(θ).(51)\beta\ll m_0^{-1} \ll R\sin(\theta). \tag*{(51)}

The response on the screening scale can therefore be computed using a straight line in flat space.

The perimeter coefficient mDm_D

For an infinite straight line, the perimeter coefficient is determined by the term in Wβ[C]W_\beta[C] proportional to the line length,

lim⁡L→∞Wβ[C]L=mD2πβ,(52)\lim_{L\to\infty}\frac{W_\beta[C]}{L}=\frac{m_D}{2\pi\beta}, \tag*{(52)}

where LL denotes the length of the line. We determine both the logarithmic and finite terms as ε→0\varepsilon\to0 at fixed NN.

Since Wβ[C]W_\beta[C] is the logarithm of the defect expectation value, it is computed by connected diagrams with source insertions on the line. The simplest contribution joins two source insertions by a single bulk propagator. We first evaluate this Gaussian contribution, with the leading thermal mass included in the static propagator. We then include diagrams with quartic interactions between static fields. As we explain below, these also contribute to the finite term and are summed by a nonlinear static profile.

Gaussian contribution. The Gaussian contribution comes from a single bulk propagator joining two source insertions on the line,

bulk propagator joining two source insertions(53)\text{bulk propagator joining two source insertions} \tag*{(53)}

The propagator includes both the nonzero Matsubara modes and the static mode with its leading thermal mass. This accounts for distances of order β\beta, where the reduced static theory alone is insufficient. The propagator is evaluated in the bulk thermal theory without the defect insertion; the defect enters through the two source vertices.

Let v=ℓ−ℓ′v=\ell-\ell' denote the separation between two points on the straight line at the same Euclidean time. We denote by G(∣v∣)G(|v|) the propagator of ϕ1\phi^1 between these points, with the leading thermal mass included in its static mode. At the order needed here, we evaluate it in four dimensions. For v>0v>0, it is given by

G(v)=coth⁡(πv/β)4πβv+e−m0v−14πβv.(54)G(v)=\frac{\coth(\pi v/\beta)}{4\pi\beta v}+\frac{e^{-m_0v}-1}{4\pi\beta v}. \tag*{(54)}

The first term is the massless thermal propagator. The second replaces its massless static contribution by the massive one.

The Gaussian contribution to Wβ[C]W_{\beta}[C], denoted by Wβ(2)W_{\beta}^{(2)}, is quadratic in the line source:

Wβ(2)L=h⋆22L∫Cdℓ∫Cdℓ′ G(∣ℓ−ℓ′∣)=−h⋆24πβlog⁡(βm0).(55)\frac{W_{\beta}^{(2)}}{L}=\frac{h_{\star}^{2}}{2L}\int_{C}d\ell\int_{C}d\ell^{\prime}\,G\left(\left|\ell-\ell^{\prime}\right|\right)=-\frac{h_{\star}^{2}}{4\pi\beta}\log(\beta m_{0}). \tag*{(55)}

where we regulated coincident points with a small separation cutoff. This gives the logarithmic contribution to the perimeter coefficient, with its finite normalization fixed by including all Matsubara modes. It also includes the Gaussian static contribution, which must be accounted for when adding the nonlinear correction.

Nonlinear static contribution. We now compute the finite correction from connected static tree diagrams with quartic bulk vertices. We sum these diagrams by evaluating the nonlinear saddle and subtracting the Gaussian static contribution already included above:

source–vertex diagrams+source–vertex diagrams+source–vertex diagrams+⋯(56)\text{source--vertex diagrams}+\text{source--vertex diagrams}+\text{source--vertex diagrams}+\cdots \tag*{(56)}

Circles denote source insertions, squares represent quartic vertices, and thin lines are static propagators with thermal mass m0m_{0}; the thick horizontal line represents CC. Although λ⋆=O(ε)\lambda_{\star}=O(\varepsilon), integration over the screening region gives the dimensionless combination

g⋆=λ⋆h⋆224π2(βm0)2=3(N+8)π2(N+2)+O(ε).(57)g_{\star}=\frac{\lambda_{\star}h_{\star}^{2}}{24\pi^{2}(\beta m_{0})^{2}}=\frac{3(N+8)}{\pi^{2}(N+2)}+O(\varepsilon). \tag*{(57)}

Since g⋆g_{\star} remains finite as ε→0\varepsilon\to0, arbitrarily many quartic vertices contribute at the same order.

To obtain the finite correction to the perimeter coefficient, we first determine the screened field profile sourced by a straight line. We then evaluate its on-shell action and subtract the Gaussian static contribution already included above. At leading order in ε\varepsilon, the saddle is rotationally symmetric in the two transverse spatial dimensions. For h⋆>0h_{\star}>0, we write its nonzero component as

⟨ϕ01(r⊥)D(C)⟩β⟨D(C)⟩β=F(z)β,with z=r⊥β,(58)\frac{\langle\phi_{0}^{1}(r_{\perp})D(C)\rangle_{\beta}}{\langle D(C)\rangle_{\beta}}=\frac{F(z)}{\beta},\qquad\text{with }z=\frac{r_{\perp}}{\beta}, \tag*{(58)}

where r⊥r_{\perp} is the distance from the straight line and F(z)<0F(z)<0. At this order, the profile equation and boundary conditions are

F′′(z)+1zF′(z)=(βm0)2F(z)+λ⋆6F(z)3,(59)F^{\prime\prime}(z)+\frac{1}{z}F^{\prime}(z)=(\beta m_{0})^{2}F(z)+\frac{\lambda_{\star}}{6}F(z)^{3}, \tag*{(59)}
lim⁡z→0zF′(z)=h⋆2π,(60)\lim_{z\to0}zF^{\prime}(z)=\frac{h_{\star}}{2\pi}, \tag*{(60)}
lim⁡z→∞F(z)=0.(61)\lim_{z\to\infty}F(z)=0. \tag*{(61)}

The Gaussian reference at the same h⋆h_{\star} and m0m_{0} is F0(z)=−h⋆K0(βm0z)/(2π)F_{0}(z)=-h_{\star}K_{0}(\beta m_{0}z)/(2\pi), with K0K_{0} the modified Bessel function. Both profiles have the same logarithmic singularity; their finite constants are defined by

F(z)→z→0h⋆2πlog⁡z+C⋆+o(1),(62)F(z) \xrightarrow[z\to0]{} \frac{h_\star}{2\pi}\log z+C_\star+o(1), \tag*{(62)}
C0=h⋆2π[log⁡(βm02)+γE],(63)C_0=\frac{h_\star}{2\pi}\left[\log\left(\frac{\beta m_0}{2}\right)+\gamma_E\right], \tag*{(63)}

where γE\gamma_E is Euler’s constant. C⋆C_\star is a constant that depends however on NN. It can be determined for any choice of NN. C0C_0 plays the same role for the reference profile.

The Gaussian calculation already includes the static response without quartic interactions. We therefore compare the nonlinear saddle with a Gaussian saddle at the same source strength and thermal mass, isolating the additional interaction contribution without counting the Gaussian term twice. Their common short-distance divergence cancels in the difference. Using a common short-distance regulator r0r_0, the difference of the two on-shell static actions gives the finite correction

ΔWstatL=lim⁡r0→0Istat(0)[F0]−Istat[F]L=h⋆24πβBN(g⋆),(64)\frac{\Delta W_{\mathrm{stat}}}{L}=\lim_{r_0\to0}\frac{I_{\mathrm{stat}}^{(0)}[F_0]-I_{\mathrm{stat}}[F]}{L}=\frac{h_\star^2}{4\pi\beta}B_N(g_\star), \tag*{(64)}

Here, as explained above, IstatI_{\mathrm{stat}} includes the line source and quartic interaction, and Istat(0)I_{\mathrm{stat}}^{(0)} has the same source and mass but no quartic interaction. The contribution BN(g⋆)B_N(g_\star) can be expressed as

BN(g⋆)=−2πh⋆(C⋆−C0)+π2λ⋆3h⋆2∫0∞dz zF(z)4.(65)B_N(g_\star)=-\frac{2\pi}{h_\star}(C_\star-C_0)+\frac{\pi^2\lambda_\star}{3h_\star^2}\int_0^\infty dz\,zF(z)^4. \tag*{(65)}

We evaluate BN(g⋆)B_N(g_\star) by solving the radial equation numerically, extracting C⋆C_\star, and computing the convergent integral. The resulting values in Table 2 determine the nonlinear contribution at order ε0\varepsilon^0.

NNBN(g⋆)B_N(g_\star)αN\alpha_NmD(ε)m_D(\varepsilon)
1−0.30371-0.303712.733472.73347−94log⁡(ε)−3.13378+2.73347ε-\frac{9}{4}\log(\varepsilon)-3.13378+2.73347\sqrt{\varepsilon}
2−0.26715-0.267153.245683.24568−52log⁡(ε)−3.75501+3.24568ε-\frac{5}{2}\log(\varepsilon)-3.75501+3.24568\sqrt{\varepsilon}
3−0.24349-0.243493.765023.76502−114log⁡(ε)−4.35190+3.76502ε-\frac{11}{4}\log(\varepsilon)-4.35190+3.76502\sqrt{\varepsilon}
4−0.22688-0.226884.286614.28661−3log⁡(ε)−4.93381+4.28661ε-3\log(\varepsilon)-4.93381+4.28661\sqrt{\varepsilon}
10−0.18194-0.181947.413547.41354−92log⁡(ε)−8.29086+7.41354ε-\frac{9}{2}\log(\varepsilon)-8.29086+7.41354\sqrt{\varepsilon}
∞\infty−0.13093-0.130930.515060.51506−14log⁡(ε)−0.53647+0.51506ε-\frac{1}{4}\log(\varepsilon)-0.53647+0.51506\sqrt{\varepsilon}

Table 2. Leading small-ε\varepsilon values of the finite profile correction BN(g⋆)B_N(g_\star), the fluctuation coefficient αN\alpha_N, and the perimeter coefficient mDm_D through order ε\sqrt{\varepsilon}. The last row takes N→∞N\to\infty after the small-ε\varepsilon calculation and reports αN/N\alpha_N/N and mD/Nm_D/N in the last two columns. The estimated numerical uncertainty of the computed coefficients is ∼10−5\sim10^{-5}, separate from omitted higher-order terms.

First fluctuation correction. We now compute the order-ε\sqrt{\varepsilon} correction by integrating fluctuations around the nonlinear static profile. Keeping terms quadratic in these fluctuations gives a one-loop determinant whose operators depend on the profile. After renormalization, this static loop contributes an amount of order m0m_0 per unit line length (more precisely: βm0∼ε\beta m_0 \sim\sqrt{\varepsilon} to the dimensionless coefficient mDm_D). The determinant includes static loop diagrams with arbitrarily many source insertions, so correcting the bulk propagator in the two-source diagram alone would be insufficient. Small fluctuations around the line profile are governed by two operators: H∥\mathcal{H}_{\parallel} for the sourced field component and H⊥\mathcal{H}_{\perp} for each of the other N−1N-1 components. They are defined as

H∥=H0+λ⋆2β2F2(z),\mathcal{H}_{\parallel} = \mathcal{H}_0 + \frac{\lambda_\star}{2\beta^2}F^2(z),
H⊥=H0+λ⋆6β2F2(z),(66)\mathcal{H}_{\perp} = \mathcal{H}_0 + \frac{\lambda_\star}{6\beta^2}F^2(z), \tag*{(66)}

with H0=−∇2+m02\mathcal{H}_0=-\nabla^2+m_0^2, and where ∇2\nabla^2 acts in three spatial dimensions at this order of the ε\varepsilon-expansion. Dividing their Gaussian functional integral by the defect-free one gives

δmD=−πβlim⁡L→∞1L[log⁡(det⁡H∥det⁡H0)+(N−1)log⁡(det⁡H⊥det⁡H0)].(67)\delta m_D=-\pi\beta\lim_{L\to\infty}\frac{1}{L}\left[\log\left(\frac{\det\mathcal{H}_{\parallel}}{\det\mathcal{H}_0}\right)+(N-1)\log\left(\frac{\det\mathcal{H}_{\perp}}{\det\mathcal{H}_0}\right)\right]. \tag*{(67)}

The straight line allows us to Fourier transform along it, with momentum kk. Because F(z)F(z) depends only on the transverse distance to the defect, we may decompose each two-dimensional transverse operator into angular-momentum channels. For each kk and angular momentum, we compute a radial determinant relative to the defect-free operator, sum the channels, and integrate over kk. The first-order term in the profile-dependent potential must be treated separately. With Gk=(−∇⊥2+k2+m02)−1G_k=(-\nabla_\perp^2+k^2+m_0^2)^{-1}, the prescription is

lim⁡L→∞1L[log⁡(det⁡Hidet⁡H0)]=∫−∞∞dk2πTr⁡⊥[log⁡(1+Gk(Hi−H0))−Gk(Hi−H0)]−m04π∫d2r⊥ (Hi−H0).(68)\lim_{L\to\infty}\frac{1}{L}\left[\log\left(\frac{\det\mathcal{H}_i}{\det\mathcal{H}_0}\right)\right]=\int_{-\infty}^{\infty}\frac{\mathrm{d}k}{2\pi}\operatorname{Tr}_{\perp}\left[\log\left(1+G_k(\mathcal{H}_i-\mathcal{H}_0)\right)-G_k(\mathcal{H}_i-\mathcal{H}_0)\right]-\frac{m_0}{4\pi}\int\mathrm{d}^2r_{\perp}\,(\mathcal{H}_i-\mathcal{H}_0). \tag*{(68)}

where here the index ii should be understood as i=∥,⊥i=\parallel,\perp. The last term is the finite first-order contribution in dimensional regularization. It already accounts for the soft thermal-mass correction, so we do not add that correction again. We denote this contribution by

δmD=αNε+o(ε).(69)\delta m_D=\alpha_N\sqrt{\varepsilon}+o(\sqrt{\varepsilon}). \tag*{(69)}

Numerical evaluation of the determinants gives the results presented in Table 2.

Final result. We now add the finite static correction at g=g⋆g=g_\star and the first fluctuation correction to the Gaussian thermal result. This gives

lim⁡L→∞Wβ[C]L=h⋆24πβ[−log⁡(βm0)+BN(g⋆)]+αN2πβε+o(ε)β.(70)\lim_{L\to\infty}\frac{W_\beta[C]}{L}=\frac{h_\star^2}{4\pi\beta}\left[-\log(\beta m_0)+B_N(g_\star)\right]+\frac{\alpha_N}{2\pi\beta}\sqrt{\varepsilon}+\frac{o(\sqrt{\varepsilon})}{\beta}. \tag*{(70)}

Matching to Equation (52), we obtain

mD=N+82[−log⁡(βm0)+BN(g⋆)]+αNε+o(ε).(71)m_D = \frac{N+8}{2}\left[-\log(\beta m_0)+B_N(g_\star)\right]+\alpha_N\sqrt{\varepsilon}+o(\sqrt{\varepsilon}). \tag*{(71)}

Using the leading thermal mass, we can write the result as

mD=−N+84log⁡(ε)−N+84log⁡(2π2(N+2)3(N+8))+N+82BN(g⋆)+αNε+o(ε).(72)m_D=-\frac{N+8}{4}\log(\varepsilon)-\frac{N+8}{4}\log\left(\frac{2\pi^2(N+2)}{3(N+8)}\right)+\frac{N+8}{2}B_N(g_\star)+\alpha_N\sqrt{\varepsilon}+o(\sqrt{\varepsilon}). \tag*{(72)}

Note that the nonlinear profile contributes to the finite term already at leading order. In Table 2, we provide the explicit ε\varepsilon-expanded expression for specific NN.

d=2d=2 and Padé interpolation for N=1N=1. In d=2d=2, the magnetic line cuts the thermal cylinder into a strip of width β\beta with identical fixed-spin boundary conditions. After the temperature-independent perimeter subtraction, comparing the strip and cylinder vacuum energies gives

mD(d=2)=2π2c(124−16)=−π28,c=12.(73)m_D(d=2)=2\pi^2c\left(\frac{1}{24}-\frac{1}{6}\right)=-\frac{\pi^2}{8},\qquad c=\frac{1}{2}. \tag*{(73)}

To interpolate between d=4d=4 and d=2d=2, we approximate mD+94log⁡εm_D+\frac{9}{4}\log\varepsilon by a [1/1][1/1] Padé in ε\sqrt{\varepsilon}. Matching the constant and ε\sqrt{\varepsilon} terms of the expansion above and imposing the exact value at ε=2\varepsilon=2 gives

mDPadeˊ(ε)=−94log⁡(ε)+−3.133784+2.473397ε1+0.082991ε.(74)m_D^{\mathrm{Pad\acute{e}}}(\varepsilon)=-\frac{9}{4}\log(\varepsilon)+\frac{-3.133784+2.473397\sqrt{\varepsilon}}{1+0.082991\sqrt{\varepsilon}}. \tag*{(74)}

At d=3d=3, this yields the prediction mDPadeˊ∼−0.610m_D^{\mathrm{Pad\acute{e}}}\sim-0.610.

The bending coefficient t2t_2

To extract t2t_2, we consider a weakly deformed spatial line CAC_A in flat thermal space at fixed Euclidean time,

x(s)=(s,Acos⁡(ks),0),Ak≪1,k≪m0.(75)x(s)=(s,A\cos(ks),0),\qquad Ak\ll1,\qquad k\ll m_0. \tag*{(75)}

Here ss is distance along the undeformed line, AA is the amplitude, and kk is the wave number. We take A→0A\to0 and k/m0→0k/m_0\to0 before ε→0\varepsilon\to0, at fixed NN. For a projected length L0L_0 containing an integer number of wavelengths, the EFT predicts the quadratic response relative to the straight line CstC_{\mathrm{st}},

Wβ[CA]−Wβ[Cst]L0=mDA2k28πβ+βt2A2k44π+⋯ .(76)\frac{W_\beta[C_A]-W_\beta[C_{\mathrm{st}}]}{L_0}=\frac{m_DA^2k^2}{8\pi\beta}+\frac{\beta t_2A^2k^4}{4\pi}+\cdots. \tag*{(76)}

The k2k^2 term accounts for the increase in length and is fixed by mDm_D. Matching the k4k^4 term therefore determines t2t_2.

Gaussian contribution. We compute the diagram (53) with the bent line. For a fixed separation measured along the line, bending brings the source insertions closer in space and changes the propagator joining them. Expanding this change to second order in curvature gives the Gaussian bending coefficient:

t2G=πh⋆28β∫−∞∞dv v2G(v)+o(ε0)=h⋆216(βm0)2+o(ε0).(77)t_2^G = \frac{\pi h_\star^2}{8\beta}\int_{-\infty}^{\infty} \mathrm{d}v\,v^2G(v)+o(\varepsilon^0)=\frac{h_\star^2}{16(\beta m_0)^2}+o(\varepsilon^0). \tag*{(77)}

The nonzero Matsubara modes do not affect the leading 1/ε1/\varepsilon term. The factor m0−2m_0^{-2} reflects the transverse size of the screening cloud: a broader cloud is more sensitive to bending. However, as in the perimeter calculation, the finite value of g⋆g_\star requires the nonlinear static interactions to be included at leading order.

Nonlinear static contribution. We include these interactions by computing the response of the straight-line profile F(z)F(z) to a small bend. This uses the same profile and coordinate z=r⊥/βz=r_\perp/\beta as in the perimeter calculation. A uniform transverse displacement simply translates the profile, producing a change proportional to F′(z)F'(z). When the displacement varies along the line, the surrounding field must also adjust to the curvature.

We describe this adjustment by a radial function Y(z)Y(z). For local curvature KK directed along the transverse angle ϑ=0\vartheta=0, the first curvature correction to the static field is −KY(z)cos⁡ϑ-K Y(z)\cos\vartheta. Linearizing the field equation about the nonlinear profile gives

[−d2dz2−1zddz+1z2+(βm0)2+λ⋆2F(z)2]Y(z)=F′(z).(78)\left[-\frac{\mathrm{d}^2}{\mathrm{d}z^2}-\frac{1}{z}\frac{\mathrm{d}}{\mathrm{d}z}+\frac{1}{z^2}+(\beta m_0)^2+\frac{\lambda_\star}{2}F(z)^2\right]Y(z)=F'(z). \tag*{(78)}

The z−2z^{-2} term comes from the angular dependence of a transverse displacement, while the term proportional to F2F^2 accounts for the interaction with the screening cloud. Thus the additional equation is linear even though the background profile is nonlinear. Keeping the line source fixed and requiring decay far from the defect selects

Y(z)=−h⋆4πzlog⁡(z)+O(z)(z→0),Y(z)→0(z→∞).(79)Y(z)=-\frac{h_\star}{4\pi}z\log(z)+O(z)\quad(z\to0),\qquad Y(z)\to0\quad(z\to\infty). \tag*{(79)}

After the contribution from the change in length has been accounted for, the on-shell action expresses the bending coefficient as

t2=π2∫0∞dz zF′(z)Y(z)+o(ε−1).(80)t_2=\pi^2\int_0^\infty\mathrm{d}z\,zF'(z)Y(z)+o(\varepsilon^{-1}). \tag*{(80)}

The integral measures the overlap between the translation of the original profile and its additional response to curvature. It is convergent at both endpoints. Numerically, we therefore reuse the straight-line solution, solve one linear radial equation, and evaluate this integral. This expression includes the Gaussian contribution: inserting F0(z)=−h⋆K0(βm0z)/(2π)F_0(z)=-h_\star K_0(\beta m_0z)/(2\pi) gives Y0(z)=h⋆zK0(βm0z)/(4π)Y_0(z)=h_\star zK_0(\beta m_0z)/(4\pi) and reproduces (77) at leading order.

Final result. The leading bending coefficient takes the form

t2=cNε+o(ε−1),(81)t_2 = \frac{c_N}{\varepsilon} + o(\varepsilon^{-1}), \tag*{(81)}

with the values of cNc_N listed in Table 3. The nonlinear response reduces the Gaussian estimate substantially, confirming that the same static interactions needed for the perimeter coefficient are also essential for bending.

NNcNGc_N^{\mathrm{G}}cNc_N
10.2564690.138484
20.2374720.137326
30.2298720.139044

Table 3. Leading coefficients cN=lim⁡ε→0εt2c_N = \lim_{\varepsilon\to0} \varepsilon t_2 in the manuscript convention. The Gaussian comparison keeps the same source strength and thermal mass.

In our convention, t2>0t_2 > 0 means that bending increases WβW_\beta after the perimeter contribution has been accounted for. The result determines the leading small-ε\varepsilon coefficient; fluctuations about the saddle are expected to give relative corrections of order ε\sqrt{\varepsilon} and are not included here. The expansion remains valid when the deformation wavelength is much larger than the screening length.

3d Ising model

The 3d3d Ising model cannot be treated analytically, if not as a ε→1\varepsilon\to1 limit of the ε\varepsilon-expansion discussed above or a N→1N \to1 limit of a proper large NN expansion. None of these options is supposed to be a good approximation and for this reason we are forced to study the model numerically and simulate it on a lattice.5

Lattice model and defect observable

We study the critical three-dimensional Ising model on a periodic isotropic cubic lattice,

Sβ1×T2,Nτ=βa,(82)S^1_\beta\times T^2, \qquad N_\tau= \frac{\beta}{a}, \tag*{(82)}

with spins sx=±1s_x = \pm1 and bulk partition function

Z0=∑{s}exp⁡[Kc∑⟨xy⟩sxsy],Kc=0.221654626.(83)Z_0 = \sum_{\{s\}} \exp\left[K_c \sum_{\langle xy\rangle} s_x s_y\right], \qquad K_c = 0.221654626. \tag*{(83)}

The coupling is the flat-space critical Ising coupling (computed e.g. in [58, 59]) and is held fixed throughout the calculation. Compactifying Euclidean time does not entail a new tuning of the bulk critical point. Our purpose is to check the EFT in equation (5) and predict the first coefficients in the high temperature expansion. For this purpose the fact that the spatial manifold is not a sphere as in the derivation of the asymptotic is not important: the EFT has to be valid in any manifold in the high temperature limit.

Perimeter coefficient for the straight line

The defect is a closed magnetic line CC, placed at one Euclidean-time slice and rasterized as a spatial circle of radius RR. Its physical definition is the fixed-spin operator

Dpin(C)=∏i∈Cδsi,+1.(84)\mathcal{D}_{\mathrm{pin}}(C)=\prod_{i\in C}\delta_{s_i,+1}. \tag*{(84)}

It constrains every spin on the loop to be up. This is the strong-field representative of the symmetry-breaking magnetic line fixed point. It is a local codimension-two defect: no sheet of modified bonds, frustrated plaquette, or change of bulk holonomy is introduced.

For the free-energy measurement we introduce an auxiliary line field,

Dh(C)=exp⁡[h∑i∈C(si−1)],Dpin(C)=lim⁡h→+∞Dh(C).(85)\mathcal{D}_{h}(C)=\exp\left[h\sum_{i\in C}(s_i-1)\right],\qquad\mathcal{D}_{\mathrm{pin}}(C)=\lim_{h\to+\infty}\mathcal{D}_{h}(C). \tag*{(85)}

The subtraction by 1 is essential: a spin already fixed to +1+1 contributes unit weight, while a down spin costs a factor e−2he^{-2h}. Thus hh is only an auxiliary thermodynamic-integration coordinate.

Define

Zh(C)=∑{s}exp⁡[Kc∑⟨xy⟩sxsy+h∑i∈C(si−1)],Wh(C)=log⁡Zh(C)Z0.(86)Z_h(C)=\sum_{\{s\}}\exp\left[K_c\sum_{\langle xy\rangle}s_xs_y+h\sum_{i\in C}(s_i-1)\right],\qquad W_h(C)=\log\frac{Z_h(C)}{Z_0}. \tag*{(86)}

Since Zh=0=Z0Z_{h=0}=Z_0, differentiation gives

∂Wh∂h=⟨∑i∈C(si−1)⟩h=⟨MC⟩h−∣C∣=−2⟨N↓(C)⟩h,\frac{\partial W_h}{\partial h}=\left\langle\sum_{i\in C}(s_i-1)\right\rangle_h=\langle M_C\rangle_h-|C|=-2\langle N_{\downarrow}(C)\rangle_h,

where MC=∑i∈CsiM_C=\sum_{i\in C}s_i and N↓(C)N_{\downarrow}(C) counts down spins on the loop. The desired defect one-point function is therefore obtained directly from

Wpin(C)≡log⁡Zpin(C)Z0=∫0∞dh [⟨MC⟩h−∣C∣].(87)W_{\mathrm{pin}}(C)\equiv\log\frac{Z_{\mathrm{pin}}(C)}{Z_0}=\int_0^\infty dh\,\left[\langle M_C\rangle_h-|C|\right]. \tag*{(87)}

This formula already divides by the bulk partition function. Hence it measures the logarithm of the normalized defect one-point function, not the global bulk free energy.

The integral is evaluated up to a sufficiently large hmax⁡h_{\max}. The omitted tail is exponentially bounded. In fact it is easy to show that

∣Wpin−Whmax⁡∣≤∣C∣e−2(hmax⁡−6Kc).(88)\left|W_{\mathrm{pin}}-W_{h_{\max}}\right|\leq|C|e^{-2(h_{\max}-6K_c)}. \tag*{(88)}

The final uncertainty combines Monte-Carlo statistics, and this tail estimate.

Perimeter coefficient for the straight line

Further details of the simulations are given in Appendix § 6. The results are shown in the left panel of Figure 3.

Two-panel plot showing the partition-function ratio and fit of $W_{\mathrm{pin}}/N_x$

Figure 3. Left Panel: The partition-function ratio log⁡(Z[β,D]/Z[β])\log(Z[\beta,\mathcal{D}]/Z[\beta]) in the three-dimensional Ising model as a function of R/βR/\beta. Orange points show the Monte Carlo data, and the black line shows the fit motivated by the thermal EFT. Right panel: Fit of Wpin/NxW_{\mathrm{pin}}/N_x in 1/β1/\beta: the slope of the linear fit is expected to be 2πmD2\pi m_D.

At large R/βR/\beta, the data are consistent with the leading EFT prediction. Writing ρ=R/β\rho= R/\beta for the geometry considered here, this prediction takes the form

log⁡Z[β,D]Z[β]=mDbareρ+γ+⋯ .(89)\log\frac{Z[\beta,\mathcal{D}]}{Z[\beta]} = m_D^{\mathrm{bare}}\rho+ \gamma+ \cdots. \tag*{(89)}

And we should substract from the coefficient mDbarem_D^{\mathrm{bare}} the scheme dependent contribution contribution, that could be obtained by studying ths system at zero temperature. A fit to the simulation data gives

mDbare=−19±2,(90)m_D^{\mathrm{bare}} = -19 \pm2 , \tag*{(90)}

with a reduced chi-squared of χ2/dof≃0.025\chi^2/\mathrm{dof} \simeq0.025.6 Thus we need to find the temperature dependent part. We therefore performed a new, eight-point Monte Carlo scan for various Nt=βN_t = \beta,7 placing a straight, spatially wrapping pinned line along the xx direction in boxes with Nx=8βN_x = 8\beta and Ny=12βN_y = 12\beta. At each temperature we simulated various pinning fields between h=0h = 0 and h=8h = 8. We used Bennett’s acceptance-ratio method8 to determine the free-energy difference between neighboring fields from the measured line magnetization, thereby avoiding a numerical quadrature of the field-dependent expectation value. After subtracting the known large-field normalization, we obtained the free energy per unit line length, w(β)=Wpin(β)/Nxw(\beta) = W_{\mathrm{pin}}(\beta)/N_x, and fitted it to

w(Nt)=−κ+mD2πβ+O(β−2).w(N_t) = -\kappa+ \frac{m_D}{2\pi\beta} + O(\beta^{-2}) .

The weighted linear fit yields The plot compared with the fit is shown in the right panel of Figure 3.

mD=−0.53±0.06.m_D = -0.53 \pm0.06 .

Longer chains and further finite-size studies are still needed for a controlled continuum estimate more accurately but we leave them for future studies.

Finally, let us compare the Monte Carlo prediction with the Padé extrapolation from the ε\varepsilon-expansion. The function of ε\varepsilon is given in equation (74) and plotted in Figure 4. In 3d the approximations gives mD∼−0.61m_D \sim-0.61 which, considering solely the statistical error from Monte Carlo, it matches up to ∼1.6σ\sim1.6\sigma, confirming the prediction.

Padé extrapolation plot

Figure 4. The Padé extrapolation for the value of mDm_D as a function of ε\varepsilon compared with Monte Carlo result for 3d Ising (red point) and exact result in 2D Ising (blue dot).

Large-N Gross–Neveu model

Setup

Action. We consider NN two-component Dirac fermions in d=3d = 3 with the action

S=∫d3x[ψˉi(ϕ+σ)ψi+N2gσ2],i=1,…,N,(91)S = \int\mathrm{d}^{3}x \left[\bar{\psi}_i(\phi+\sigma)\psi_i + \frac{N}{2g}\sigma^2\right], \qquad i = 1,\ldots,N, \tag*{(91)}

at the critical coupling. Since \det(i\slashed{Q}+\sigma)=Q^2+\sigma^2, integrating out the fermions gives

1gc=2∫d3Q(2π)31Q2=∫d2q(2π)21q.(92)\frac{1}{g_c} = 2\int\frac{\mathrm{d}^{3}Q}{(2\pi)^3}\frac{1}{Q^2} = \int\frac{\mathrm{d}^{2}q}{(2\pi)^2}\frac{1}{q}. \tag*{(92)}

The field σ\sigma is odd under the discrete symmetry that forbids a fermion mass. At large NN, its dimension is Δσ=1+O(1/N)\Delta_\sigma= 1 + O(1/N), with a negative 1/N1/N correction.

Line. We define σ^=N σ\hat{\sigma} = \sqrt{N}\,\sigma and the unit-normalized operator O=π2σ^O = \frac{\pi}{2}\hat{\sigma}, and consider

D(C)=exp⁡[−h∫Cdℓ O].(93)D(C) = \exp\left[-h\int_C \mathrm{d}\ell\,O\right]. \tag*{(93)}

The connected nn-point functions of σ^\hat{\sigma} scale as N1−n/2N^{1-n/2}. At N=∞N = \infty, OO is therefore a Gaussian field of dimension one, and D(C)D(C) is a conformal line for every hh.

Thermal propagator

Fermion bubble. At N=∞N = \infty, the propagator of σ^\hat{\sigma} is the inverse of the fermion bubble,

⟨σ^σ^⟩β(P)=1Πβ(P),Πβ(P)=1gc−fermion bubble.(94)\langle\hat{\sigma}\hat{\sigma}\rangle_\beta(P) = \frac{1}{\Pi_\beta(P)}, \qquad\Pi_\beta(P) = \frac{1}{g_c} - \text{fermion bubble}. \tag*{(94)}

Using \operatorname{tr}[\slashed{Q}(\slashed{Q}+\slashed{P})] = 2Q \cdot(Q+P) and 2Q⋅(Q+P)=Q2+(Q+P)2−P22Q \cdot(Q+P) = Q^2 + (Q+P)^2 - P^2, the bubble becomes

Πβ(P)=1gc−∫Q[1Q2+1(Q+P)2]+P2Jβ(P),Jβ(P)=∫Q1Q2(Q+P)2.(95)\Pi_\beta(P) = \frac{1}{g_c} - \int_Q \left[\frac{1}{Q^2}+\frac{1}{(Q+P)^2}\right] + P^2 J_\beta(P), \qquad J_\beta(P) = \int_Q \frac{1}{Q^2(Q+P)^2}. \tag*{(95)}

Here ∫Q≡1β∑m∫d2q(2π)2\int_Q \equiv\frac{1}{\beta}\sum_m\int\frac{\mathrm{d}^2q}{(2\pi)^2}, with Q=(νm,q)Q = (\nu_m,\mathbf{q}) and fermionic frequencies νm=(2m+1)π/β\nu_m = (2m+1)\pi/\beta, while P=(ωn,k)P = (\omega_n,\mathbf{k}) with ωn=2πn/β\omega_n = 2\pi n/\beta. A bosonic shift preserves the fermionic frequencies, so both tadpoles equal to

∫d2q(2π)2tanh⁡(βq/2)2q.\int\frac{\mathrm{d}^2q}{(2\pi)^2}\frac{\tanh(\beta q/2)}{2q}.

Subtracting 1/gc1/g_c, we obtain

Πβ(P)=log⁡2πβ+P2Jβ(P).(96)\Pi_\beta(P) = \frac{\log2}{\pi\beta} + P^2 J_\beta(P). \tag*{(96)}

At zero temperature, J=1/(8∣P∣)J = 1/(8|P|) and the propagator reduces to ⟨σ^σ^⟩(P)=8/∣P∣\langle\hat{\sigma}\hat{\sigma}\rangle(P) = 8/|P|, i.e. 4/(π2x2)4/(\pi^2 x^2) in position space.

Screening. At gcg_c, the finite-temperature gap equation 1/gc=2∫tanh⁡(βE/2)/(2E)1/g_c = 2\int\tanh(\beta E/2)/(2E), with E=q2+σˉ2E = \sqrt{q^2+\bar{\sigma}^2}, admits only σˉ=0\bar{\sigma} = 0. The thermal state is therefore symmetric. Expanding (4.68) at small momentum gives

Πβ(0,k)=log⁡2πβ+βk216π+⋯ .(97)\Pi_\beta(0,\mathbf{k}) = \frac{\log2}{\pi\beta} + \frac{\beta k^2}{16\pi} + \cdots. \tag*{(97)}

which defines a static screening scale 16log⁡2/β≈3.3/β\sqrt{16\log2/\beta} \approx3.3/\beta. Unlike at the Wilson–Fisher fixed point, there is no parametrically light static mode.

The integral JβJ_\beta. Combining the denominators with a Feynman parameter xx, integrating over q\mathbf{q}, and using the fermionic sum

1β∑m1(νm+a)2+b2=sinh⁡(βb)2b[cosh⁡(βb)+cos⁡(βa)].(98)\frac{1}{\beta}\sum_m \frac{1}{(\nu_m+a)^2+b^2}=\frac{\sinh(\beta b)}{2b\left[\cosh(\beta b)+\cos(\beta a)\right]} . \tag*{(98)}

we find

Jβ(ωn,k)=14π∫01dx sinh⁡(βb)2b[cosh⁡(βb)+cos⁡(2πn(1−x))],b=x(1−x) ∣P∣.(99)J_\beta(\omega_n,\mathbf{k})=\frac{1}{4\pi}\int_0^1 dx\,\frac{\sinh(\beta b)}{2b\left[\cosh(\beta b)+\cos\left(2\pi n(1-x)\right)\right]},\qquad b=\sqrt{x(1-x)}\,|\mathbf{P}|. \tag*{(99)}

At zero temperature this reproduces J=1/(8∣P∣)J=1/(8|\mathbf{P}|). We have also checked (99) against a direct Matsubara sum.

Endpoint layer. Substituting x=sin⁡2θx=\sin^2\theta and using the symmetry θ→π/2−θ\theta\to\pi/2-\theta, we can write (96) as

Πβ(P)=∣P∣8+1β[log⁡2π+β∣P∣2π∫0π/4dθ (F(θ)−1)],F=sinh⁡(βb)cosh⁡(βb)+cos⁡(2πncos⁡2θ).(100)\Pi_\beta(P)=\frac{|\mathbf{P}|}{8}+\frac{1}{\beta}\left[\frac{\log2}{\pi}+\frac{\beta|\mathbf{P}|}{2\pi}\int_0^{\pi/4}d\theta\,(F(\theta)-1)\right],\qquad F=\frac{\sinh(\beta b)}{\cosh(\beta b)+\cos\left(2\pi n\cos^2\theta\right)}. \tag*{(100)}

The integrand is exponentially small unless θ≲1/(β∣P∣)\theta\lesssim1/(\beta|\mathbf{P}|). In this layer F−1→tanh⁡(φ/2)−1F-1\to\tanh(\varphi/2)-1, with φ=β∣P∣θ\varphi=\beta|\mathbf{P}|\theta, and ∫0∞dφ [tanh⁡(φ/2)−1]=−2log⁡2\int_0^\infty d\varphi\,[\tanh(\varphi/2)-1]=-2\log2. Hence the constant term cancels at large momentum, and Πβ(P)−∣P∣/8=O(β−2∣P∣−1)\Pi_\beta(P)-|\mathbf{P}|/8=O(\beta^{-2}|\mathbf{P}|^{-1}).

Leading term in the EFT: mDm_D

Line integral. For a line along yy, we need to make use of

∫dv ⟨σ^(v)σ^(0)⟩β=1β∑n∫dk2π 1Πβ(ωn,k).(101)\int dv\,\langle\hat{\sigma}(v)\hat{\sigma}(0)\rangle_\beta=\frac{1}{\beta}\sum_n\int\frac{dk}{2\pi}\,\frac{1}{\Pi_\beta(\omega_n,k)}. \tag*{(101)}

To organize the zero-temperature subtraction, we add and subtract the reference propagator 8/P2+M28/\sqrt{P^2+M^2} for an arbitrary M>0M>0. Its frequency sum can be performed exactly by Poisson resummation, using Gref(r)=4MK1(Mr)/(π2r)G_{\mathrm{ref}}(r)=4MK_1(Mr)/(\pi^2r) and ∫dv K1(Mv2+a2)/v2+a2=πe−Ma/(Ma)\int dv\,K_1(M\sqrt{v^2+a^2})/\sqrt{v^2+a^2}=\pi e^{-Ma}/(Ma). We obtain

Iσ^=1β∑n∫dk2π[1Πβ(ωn,k)−8ωn2+k2+M2]−8πβlog⁡(1−e−βM)−4Mπ.(102)I_{\hat{\sigma}}=\frac{1}{\beta}\sum_n\int\frac{dk}{2\pi}\left[\frac{1}{\Pi_\beta(\omega_n,k)}-\frac{8}{\sqrt{\omega_n^2+k^2+M^2}}\right]-\frac{8}{\pi\beta}\log\left(1-e^{-\beta M}\right)-\frac{4M}{\pi}. \tag*{(102)}

The bracket decays as n−2n^{-2}, with the coefficient fixed by the large-momentum expansion. Independence of the result from MM provides a check of the numerics.

Final result. We evaluate (102) numerically, using (100) for Πβ\Pi_\beta. The results are listed in Table 4. For the unit-normalized operator, IO=π24Iσ^I_O=\frac{\pi^2}{4}I_{\hat{\sigma}}. We get therefore

βM\beta MβIσ^\beta I_{\hat{\sigma}}βIO\beta I_OmD/h∗2m_D/h_*^2
2−1.077361−2.658283−8.3512
3−1.077361−2.658283−8.3512
5−1.077362−2.658283−8.3512

Table 4. Line integral (102) for three values of the auxiliary mass MM, and the resulting perimeter coefficient (103). The estimated numerical uncertainty is ∼10−6\sim10^{-6}.

mD=πβh⋆2IO=−8.3512h⋆2+O(1/N).(103)m_D=\pi\beta h_\star^2 I_O=-8.3512h_\star^2+O(1/N). \tag*{(103)}

The perimeter coefficient is negative. Since the fermions are antiperiodic, the σ\sigma correlator is screened on scales of order β\beta, and thermal decorrelation along the line dominates. This is the same mechanism that makes mDm_D negative for every weakly coupled line in d=2d=2. It is opposite to the Wilson–Fisher magnetic line near d=4d=4, where a static mode of mass m0∼ε/βm_0 \sim\sqrt{\varepsilon}/\beta makes IJI_J logarithmically large and positive.

N=2\mathcal{N}=2 Chern–Simons-matter theory

In every integer-dimensional example above, the perimeter coefficient is negative. This is not a consequence of unitarity and screening: in d=3d=3, the N=2\mathcal{N}=2 supersymmetric U(1)kU(1)_k Chern–Simons theory with one charged chiral multiplet has a conformal line with mD>0m_D>0. At large kk the line is described by a classical field, and the sign of mDm_D follows from an exact identity.

Setup

Action. We consider a complex scalar QQ and a two-component Dirac fermion ψ\psi of unit charge, coupled to a U(1)U(1) gauge field with Chern–Simons level k∈Z+12k\in\mathbb{Z}+\frac{1}{2}. In Lorentzian signature, and in the conventions of [60],

L=k4πϵμνρAμ∂νAρ+∣DμQ∣2+iψˉγμDμψ+y QˉQψˉψ−g(QˉQ)3,Dμ=∂μ−iAμ.(104)\mathcal{L}=\frac{k}{4\pi}\epsilon^{\mu\nu\rho}A_\mu\partial_\nu A_\rho+\lvert D_\mu Q\rvert^2+i\bar{\psi}\gamma^\mu D_\mu\psi+y\,\bar{Q}Q\bar{\psi}\psi-g\left(\bar{Q}Q\right)^3,\qquad D_\mu=\partial_\mu-iA_\mu. \tag*{(104)}

The scaling dimensions are ΔQ=12\Delta_Q=\frac{1}{2} and Δψ=ΔA=1\Delta_\psi=\Delta_A=1, so that κ≡2π/k\kappa\equiv2\pi/k, yy and gg are dimensionless. The theory is N=2\mathcal{N}=2 supersymmetric for [60, 61]

y=3κ,g=κ2.(105)y=3\kappa,\qquad g=\kappa^2. \tag*{(105)}

These values arise from the auxiliary fields σ\sigma, λ\lambda, D of the vector multiplet, of dimensions 11, 32\frac{3}{2}, 22: the field D multiplies k2πσ+QˉQ\frac{k}{2\pi}\sigma+\bar{Q}Q and imposes σ=−κQˉQ\sigma=-\kappa\bar{Q}Q, so that the potential σ2QˉQ\sigma^2\bar{Q}Q becomes κ2(QˉQ)3\kappa^2(\bar{Q}Q)^3, while σψˉψ\sigma\bar{\psi}\psi and the elimination of λ\lambda contribute κ\kappa and 2κ2\kappa to yy.

Conformality. At two loops, for generic yy and gg, the beta-functions have already been computed to be equal to

(4π)2μdydμ=143y3−34yκ2−24κ3,(4π)2μdgdμ=168g2−84gκ2+16gy2−4y4+4y2κ2+8yκ3+36κ4.(106)\begin{aligned} (4\pi)^2\mu\frac{dy}{d\mu}&=\frac{14}{3}y^3-34y\kappa^2-24\kappa^3,\\ (4\pi)^2\mu\frac{dg}{d\mu}&=168g^2-84g\kappa^2+16gy^2-4y^4+4y^2\kappa^2+8y\kappa^3+36\kappa^4. \tag*{(106)} \end{aligned}

One can check that the supersymmetric point is the fixed point of these equations. The theory is thus a unitary CFT for every kk. At large kk it is weakly coupled: for Aμ=0A_\mu=0 and real F=23πkQF=\sqrt{\frac{2\sqrt{3\pi}}{k}}\mathcal{Q}, the Euclidean action of the scalar is

S=k3π∫d3x[12(∂F)2+16F6](107)S=\frac{k}{\sqrt{3\pi}}\int\mathrm{d}^{3}x\left[\frac{1}{2}(\partial F)^2+\frac{1}{6}F^6\right] \tag*{(107)}

so that 1/k1/k is the loop-counting parameter.

Line. We consider the following deformation

Dh(C)=exp⁡[h∫Cdℓ Q‾Q]=exp⁡[hk23π∫Cdℓ F2],h>0.(108)D_h(C)=\exp\left[h\int_C \mathrm{d}\ell\,\overline{Q}Q\right]=\exp\left[\frac{hk}{2\sqrt{3\pi}}\int_C \mathrm{d}\ell\,F^2\right],\qquad h>0. \tag*{(108)}

Since ΔQ‾Q=1\Delta_{\overline{Q}Q}=1, the coupling hh is dimensionless.9 Thus in the presence of the defect we must minimize the following quantity

E[F]=∫d3x[12(∂F)2+16F6]−h2∫Cdℓ F2,(109)\mathcal{E}[F]=\int\mathrm{d}^{3}x\left[\frac{1}{2}(\partial F)^2+\frac{1}{6}F^6\right]-\frac{h}{2}\int_C \mathrm{d}\ell\,F^2, \tag*{(109)}

Fixed point of the line. At zero temperature the saddle depends only on the distance rr from the line. Regularizing the source on a tube of radius aa, it obeys

(rF′)′=rF5(r>a),aF′(a)F(a)=−h2π,F(∞)=0.(110)(rF')'=rF^5\quad(r>a),\qquad\frac{aF'(a)}{F(a)}=-\frac{h}{2\pi},\qquad F(\infty)=0. \tag*{(110)}

Let h(r)≡−2πrF′(r)/F(r)h(r)\equiv-2\pi rF'(r)/F(r) be the coupling seen at distance rr, with h(a)=hh(a)=h, and ϱ(r)≡rF(r)\varrho(r)\equiv\sqrt{r}F(r). The field equation is equivalent to the beta functions

dhdlog⁡r=h22π−2πϱ4,dϱdlog⁡r=ϱ(12−h2π).(111)\frac{\mathrm{d}h}{\mathrm{d}\log r}=\frac{h^2}{2\pi}-2\pi\varrho^4,\qquad\frac{\mathrm{d}\varrho}{\mathrm{d}\log r}=\varrho\left(\frac{1}{2}-\frac{h}{2\pi}\right). \tag*{(111)}

The term h2/2πh^2/2\pi is the running of a δ\delta-function source in two transverse dimensions. Alone, it would produce a Landau pole at r=ae2π/hr=ae^{2\pi/h}, reflecting the fact that E\mathcal{E} is unbounded below for a free field. The sextic interaction stops the growth, and both beta functions vanish at

h⋆=π,ϱ⋆4=14⟺F⋆(r)=12r,⟨Q‾Q⟩=k43π r.(112)h_\star=\pi,\qquad\varrho_\star^4=\frac{1}{4}\qquad\Longleftrightarrow\qquad F_\star(r)=\frac{1}{\sqrt{2r}},\qquad\langle\overline{Q}Q\rangle=\frac{k}{4\sqrt{3\pi}\,r}. \tag*{(112)}

Linearizing (111), deviations scale as rsr^s with s2−s−1=0s^2-s-1=0. The growing mode, s=12(1+5)s=\frac{1}{2}(1+\sqrt{5}), is excluded for a solution that is regular for all rr, and the other one decays as r−(5−1)/2r^{-(\sqrt{5}-1)/2}.10

Hence h(r)→πh(r) \to\pi monotonically for every h>0h > 0, and as a→0a \to0 all the lines DhD_h become a single line D⋆D_\star, defined by F−F⋆→0F-F_\star\to0 as r→0r \to0. The profile F⋆F_\star is invariant under the inversion xμ→xμ/x2x^\mu\to x^\mu/x^2 about a point of the line, under which F(x)→∣x∣−1F(x/x2)F(x) \to|x|^{-1}F(x/x^2) and r→r/x2r \to r/x^2, and therefore under the full conformal group of the line. Fluctuations obey (−∇2+54r2)δF=0\left(-\nabla^2+\frac{5}{4r^2}\right)\delta F=0 and behave as r±νmr^{\pm\nu_m} with νm=(m2+54)1/2\nu_m=(m^2+\frac{5}{4})^{1/2} for transverse spin mm, so the corresponding defect operators have dimensions Δ^m=12+νm\widehat{\Delta}_m=\frac{1}{2}+\nu_m. The lowest one, Δ^0=12(1+5)\widehat{\Delta}_0=\frac{1}{2}(1+\sqrt{5}), is irrelevant, in agreement with the slope 1−Δ^01-\widehat{\Delta}_0 of the beta function at h⋆h_\star, and Δ^1=2\widehat{\Delta}_1=2 is the displacement operator. These statements hold at leading order in 1/k1/k.

Leading EFT coefficient: mDm_D

Energy formula. The line at τ=0\tau=0 acts as an operator D^\widehat{D} on the Hilbert space of the spatial slice, and Z[β,D]=Tr⁡(D^e−βH)Z[\beta,D]=\operatorname{Tr}(\widehat{D}e^{-\beta H}). Neither D^\widehat{D} nor its renormalization depends on β\beta. Differentiating Wβ[C]W_\beta[C] with respect to β\beta and using (52), we obtain the exact relation

mD=2πβ2LΔE,ΔE=Tr⁡(D^He−βH)Tr⁡(D^e−βH)−Tr⁡(He−βH)Tr⁡(e−βH).(113)m_D=\frac{2\pi\beta^2}{L}\Delta E,\qquad\Delta E=\frac{\operatorname{Tr}(\widehat{D}H e^{-\beta H})}{\operatorname{Tr}(\widehat{D}e^{-\beta H})}-\frac{\operatorname{Tr}(H e^{-\beta H})}{\operatorname{Tr}(e^{-\beta H})}. \tag*{(113)}

The sign of mDm_D is the sign of the energy that the line adds to the thermal state. Since HH commutes with e−βHe^{-\beta H}, this energy can be measured on any slice τ=τ0\tau=\tau_0 with 0<τ0<β0<\tau_0<\beta.

Saddle point and sign. At leading order in 1/k1/k, ΔE\Delta E is the Euclidean energy of the saddle F(y,τ)F(y,\tau) of (109) for a straight line on Sβ1×R2S^1_\beta\times\mathbb{R}^2, where yy is the spatial coordinate transverse to the line:

ΔE=kL3π∫−∞∞dy[−12(∂τF)2+12(∂yF)2+16F6]τ=τ0.(114)\Delta E=\frac{kL}{\sqrt{3}\pi}\int_{-\infty}^{\infty}dy\left[-\frac{1}{2}(\partial_\tau F)^2+\frac{1}{2}(\partial_y F)^2+\frac{1}{6}F^6\right]_{\tau=\tau_0}. \tag*{(114)}

The saddle is the positive solution of

(∂τ2+∂y2)F=F5,F(y,τ+β)=F(y,τ),F−F⋆→r→00,F→∣y∣→∞0.(115)(\partial_\tau^2+\partial_y^2)F=F^5,\qquad F(y,\tau+\beta)=F(y,\tau),\qquad F-F_\star\xrightarrow[r\to0]{}0,\qquad F\xrightarrow[|y|\to\infty]{}0. \tag*{(115)}

It is unique: the difference ww of two solutions obeys ∇2w=qw\nabla^2w=qw with q>0q>0 and vanishes at the line and at infinity, so it can have neither a positive maximum nor a negative minimum. Hence F(y,−τ)=F(y,τ)F(y,-\tau)=F(y,\tau). Together with periodicity, this makes FF symmetric about τ=β/2\tau=\beta/2, so that ∂τF=0\partial_\tau F=0 on that slice. Choosing τ0=β/2\tau_0=\beta/2, the negative term in (114) drops out and

mD=2e03k,e0=β2∫−∞∞dy[12(∂yF)2+16F6]τ=β/2>0.(116)m_D=\frac{2e_0}{\sqrt{3}}k,\qquad e_0=\beta^2\int_{-\infty}^{\infty}dy\left[\frac{1}{2}(\partial_yF)^2+\frac{1}{6}F^6\right]_{\tau=\beta/2}>0. \tag*{(116)}

Evaluating this integral numerically yields

mD→k→∞1.083k(117)m_D\xrightarrow[k\to\infty]{}1.083k \tag*{(117)}

The perimeter coefficient is therefore positive whatever the value of e0e_0. The argument uses only that the line is described by a unique real saddle of scalar fields with a non-negative potential, and that it is invariant under τ→−τ\tau\to-\tau.

Acknowledgements

It is a pleasure to thank Daniele Artico, Zohar Komargodski, for very useful discussions. We also thank Daniele Artico, Zohar Komargodski, Enrico Marchetto, Simone Giombi. for very useful comments on the draft. The authors acknowledge the use of generative AI, in particular ChatGPT (OpenAI) and Claude (Antropic), in the preparation and editing of this manuscript. All scientific results and conclusions remain the responsibility of the human authors. In the interest of full transparency, we note that this declaration was itself written by AI, creating a self-referential loop of AI disclosure. We believe this loop is finite to all orders in perturbation theory, although a nonperturbative proof remains beyond the scope of this work.

Details on the Monte Carlo simulation

The dataset used in this work is an isotropic fixed-cutoff radius scan with

Nτ=8,Nx=Ny=176,β=8a.(118)N_{\tau} = 8,\qquad N_{x} = N_{y} = 176,\qquad\beta= 8a. \tag*{(118)}

The full lattice therefore contains

NτNxNy=8×1762=247 808(119)N_{\tau}N_{x}N_{y} = 8 \times176^{2} = 247\,808 \tag*{(119)}

Ising spins. The bulk coupling is held fixed at the flat-space critical value for every radius and every source value.

We simulate eight circular pinned magnetic loops with

R/a=(24,30,36,42,48,54,60,64),(120)R/a = (24, 30, 36, 42, 48, 54, 60, 64), \tag*{(120)}

corresponding to

Rβ=R/aNτ=(3,3.75,4.5,5.25,6,6.75,7.5,8).(121)\frac{R}{\beta} = \frac{R/a}{N_{\tau}} = (3, 3.75, 4.5, 5.25, 6, 6.75, 7.5, 8). \tag*{(121)}

At the largest radius, R/a=64R/a = 64, the loop remains 176/2−64=24176/2 - 64 = 24 lattice spacings away from its nearest periodic image.

For every radius, thermodynamic integration uses the uniform source grid

h=0, 0.25, 0.50, …, 8.00,(122)h = 0,\ 0.25,\ 0.50,\ \ldots,\ 8.00, \tag*{(122)}

namely 33 integration nodes. At each pair (R,h)(R, h) we simulate four independent Markov chains. Each chain has

Ntherm=800,Nmeas=2000,Nsep=1,(123)N_{\mathrm{therm}} = 800,\qquad N_{\mathrm{meas}} = 2000,\qquad N_{\mathrm{sep}} = 1, \tag*{(123)}

where NsepN_{\mathrm{sep}} is the number of hybrid sweeps between saved measurements. Thus each integration node contains

4×2000=8000(124)4 \times2000 = 8000 \tag*{(124)}

stored measurements before autocorrelation corrections.

A hybrid sweep consists of one local Metropolis sweep followed by one ghost-Wolff cluster update for the positive magnetic source. The actual number of sites on the rasterized loop is recorded for every radius. We therefore retain both the nominal continuum variable R/βR/\beta and the geometric diagnostic

Llat2πβ=Nloop sites2πNτ,(125)\frac{L_{\mathrm{lat}}}{2\pi\beta} = \frac{N_{\mathrm{loop\ sites}}}{2\pi N_{\tau}}, \tag*{(125)}

which quantifies the finite-lattice-spacing difference between the smooth circle used in the EFT and its lattice realization.

For reproducibility of the results the Monte Carlo code used for the simulations presented in this work are publically available on GitHub. In particular the material includes both the code for reproducibility of the data and the file for the data analysis on them.

References

  1. [1]K. G. Wilson and J. B. Kogut, The renormalization group and the ε expansion, Physics Reports 12 (1974) 75.DOI
  2. [2]C. Domb and M. S. Green, eds., Phase Transitions and Critical Phenomena, vol. 6. Academic Press, 1976.
  3. [3]D. J. Amit, Field Theory, the Renormalization Group, and Critical Phenomena. World Scientific, 2 ed., 1984.
  4. [4]J. Cardy, Scaling and Renormalization in Statistical Physics, vol. 5 of Cambridge Lecture Notes in Physics. Cambridge University Press, 1996, 10.1017/CBO9781316036440.
  5. [5]L. P. Kadanoff, Statistical Physics: Statics, Dynamics and Renormalization. World Scientific, 2000.
  6. [6]S. El-Showk, M. F. Paulos, D. Poland, S. Rychkov, D. Simmons-Duffin and A. Vichi, Solving the 3D Ising Model with the Conformal Bootstrap, Phys. Rev. D 86 (2012) 025022 [1203.6064].
  7. [7]A. L. Fitzpatrick, J. Kaplan, D. Poland and D. Simmons-Duffin, The Analytic Bootstrap and AdS Superhorizon Locality, JHEP 12 (2013) 004 [1212.3616].DOI
  8. [8]Z. Komargodski and A. Zhiboedov, Convexity and Liberation at Large Spin, JHEP 11 (2013) 140 [1212.4103].
  9. [9]S. El-Showk, M. F. Paulos, D. Poland, S. Rychkov, D. Simmons-Duffin and A. Vichi, Solving the 3d Ising Model with the Conformal Bootstrap II. c-Minimization and Precise Critical Exponents, J. Stat. Phys. 157 (2014) 869 [1403.4545].
  10. [10]S. Caron-Huot, Analyticity in Spin in Conformal Theories, JHEP 09 (2017) 078 [1703.00278].
  11. [11]D. Simmons-Duffin, D. Stanford and E. Witten, A spacetime derivation of the Lorentzian OPE inversion formula, JHEP 07 (2018) 085 [1711.03816].
  12. [12]D. Poland, S. Rychkov and A. Vichi, The Conformal Bootstrap: Theory, Numerical Techniques, and Applications, Rev. Mod. Phys. 91 (2019) 015002 [1805.04405].DOI
  13. [13]H. Anand, N. Benjamin, V. Kumar, S. Minwalla, J. Mukherjee, S. Pal et al., Semi-universality of CFT$_d$ entropy at large spin, SciPost Phys. 21 (2026) 042 [2512.00158].DOI
  14. [14]Z. Komargodski, A. Miscio­s­cia and F. K. Popov, Regge’s Inferno, 2603.10197.arxiv.org/abs/2603.10197
  15. [15]A. Advant, H. Anand, N. Benjamin, V. Kumar, S. Minwalla, J. Mukherjee et al., From Z to a: High-temperature relations, subleading semi-universality, and conformal anomalies, 2609.03013.
  16. [16]E. Katz, S. Sachdev, E. S. Sørensen and W. Witzak-Krempa, Conformal field theories at nonzero temperature: Operator product expansions, Monte Carlo, and holography, Phys. Rev. B 90 (2014) 245109 [1409.3841].DOI
  17. [17]L. Iliesiu, M. Koloğlu, R. Mahajan, E. Perlmutter and D. Simmons-Duffin, The Conformal Bootstrap at Finite Temperature, JHEP 10 (2018) 070 [1802.10266].DOI
  18. [18]J. L. Cardy, Operator Content of Two-Dimensional Conformally Invariant Theories, Nucl. Phys. B 270 (1986) 186.DOI
  19. [19]E. Shaghoulian, Modular forms and a generalized Cardy formula in higher dimensions, Phys. Rev. D 93 (2016) 126005 [1508.02728].DOI
  20. [20]N. Benjamin, J. Lee, H. Ooguri and D. Simmons-Duffin, Universal asymptotics for high energy CFT data, JHEP 03 (2024) 115 [2306.08031].DOI
  21. [21]I. Burić, F. Mang­ialardi, F. Russo, V. Schomerus and A. Vichi, Heavy-heavy-light asymptotics from thermal correlators, JHEP 04 (2026) 027 [2506.21671].
  22. [22]I. Burić, F. Mang­ialardi, F. Russo, V. Schomerus and A. Vichi, Thermal One-point Functions and Asymptotic CFT Data: QFT in AdS, 2606.17167.arxiv.org/abs/2606.17167
  23. [23]A. Miscioscia, D. Pavshinkin and F. K. Popov, Regge in Wonderland, 2609.35455.arxiv.org/abs/2609.35455
  24. [24]L. Iliesiu, M. Koloğlu and D. Simmons-Duffin, Bootstrapping the 3d Ising model at finite temperature, JHEP 12 (2019) 072 [1811.05451].DOI
  25. [25]E. Marchetto, A. Miscioscia and E. Pomoni, Sum rules & Tauberian theorems at finite temperature, JHEP 09 (2024) 044 [2312.13030].
  26. [26]J. Barrat, E. Marchetto, A. Miscioscia and E. Pomoni, Thermal Bootstrap for the Critical O(N) Model, Phys. Rev. Lett. 134 (2025) 211604 [2411.00978].DOI
  27. [27]J. Barrat, D. N. Bozkurt, E. Marchetto, A. Miscioscia and E. Pomoni, The analytic bootstrap at finite temperature, JHEP 05 (2026) 104 [2506.06422].
  28. [28]J. Barrat, D. N. Bozkurt, E. Marchetto, A. Miscioscia and E. Pomoni, Analytic thermal bootstrap in momentum space: From thermal OPE to QNMs, 2607.24919.arxiv.org/abs/2607.24919
  29. [29]Y. Guo, Z. Li and T. Shen, Thermal Polyakov bootstrap, 2609.28627.arxiv.org/abs/2609.28627
  30. [30]S. Bhattacharyya, S. Lahiri, R. Loganayagam and S. Minwalla, Large rotating AdS black holes from fluid mechanics, JHEP 09 (2008) 054 [0708.1770].DOI
  31. [31]N. Banerjee, J. Bhattacharya, S. Bhattacharya, S. Jain, S. Minwalla and T. Sharma, Constraints on fluid dynamics from equilibrium partition functions, JHEP 09 (2012) 046 [1203.3544].DOI
  32. [32]K. Jensen, M. Kaminski, P. Kovtun, R. Meyer, A. Ritz and A. Yarom, Towards hydrodynamics without an entropy current, Physical Review Letters 109 (2012) 101601 [1203.3556].DOI
  33. [33]E. Shaghoulian, Black hole microstates in AdS, Physical Review D 94 (2016) 104044 [1512.06855].DOI
  34. [34]M. Billo, V. Goncalves, E. Lauria and M. Meineri, Defects in conformal field theory, JHEP 04 (2016) 091 [1601.02883].DOI
  35. [35]M. Billo, M. Caselle, D. Gaiotto, F. Gliozzi, M. Meineri and R. Pellegrini, Line defects in the 3d Ising model, JHEP 07 (2013) 055 [1304.4110].arxiv.org/abs/1304.4110
  36. [36]F. Gliozzi, P. Liendo, M. Meineri and A. Rago, Boundary and Interface CFTs from the Conformal Bootstrap, JHEP 05 (2015) 036 [1502.07217].DOI
  37. [37]M. Lemos, P. Liendo, M. Meineri and S. Sarkar, Universality at large transverse spin in defect CFT, JHEP 09 (2018) 091 [1712.08185].
  38. [38]G. Cuomo, Z. Komargodski and A. Raviv-Moshe, Renormalization Group Flows on Line Defects, Phys. Rev. Lett. 128 (2022) 021603 [2108.01117].DOI
  39. [39]G. Cuomo, Z. Komargodski and M. Mezei, Localized magnetic field in the O(N) model, JHEP 02 (2022) 134 [2112.10634].DOI
  40. [40]J. Barrat, A. Gimenez-Grau and P. Liendo, A dispersion relation for defect CFT, JHEP 02 (2023) 255 [2205.09765].
  41. [41]O. Diatlyk, H. Khanchandani, F. K. Popov and Y. Wang, Effective Field Theory of Conformal Boundaries, Phys. Rev. Lett. 133 (2024) 261601 [2406.01550].arxiv.org/abs/2406.01550
  42. [42]M. Meineri and B. Radhakrishnan, The bootstrap of points and lines, JHEP 04 (2026) 040 [2506.17382].
  43. [43]L. Bianchi, A. Cavaglià, A. D. Gutiérrez, S. R. Kousvos and M. Meineri, Cusped Defects: Cusp Operator Expansion, Conformal Properties and Bootstrap Applications, 2609.04035.arxiv.org/abs/2609.04035
  44. [44]J. Barrat, B. Fiol, E. Marchetto, A. Miscioscia and E. Pomoni, Conformal line defects at finite temperature, SciPost Phys. 18 (2025) 018 [2407.14600].DOI
  45. [45]S. Giombi, Y.-Z. Li and J. Shan, Bouncing singularities and thermal correlators on line defects, JHEP 07 (2026) 170 [2603.11012].
  46. [46]Y. Li, H. Nakayama and T. Nishioka, Conformal defects of general dimensions at finite temperature, 2609.12720.arxiv.org/abs/2609.12720
  47. [47]D. Artico and A. Chalabi, Boundaries and defects in conformal field theories at finite temperature, 2609.38130.arxiv.org/abs/2609.38130
  48. [48]J. Barrat and S. Giombi, The pinning-field line defect at finite temperature, 2611.00210.arxiv.org/abs/2611.00210
  49. [49]O. Diatlyk, H. Khanchandani, F. K. Popov and Y. Wang, Defect fusion and Casimir energy in higher dimensions, JHEP 09 (2024) 006 [2404.05815].arxiv.org/abs/2404.05815
  50. [50]P. Kravchuk, A. Radcliffe and R. Sinha, Effective theory for fusion of conformal defects, J. Phys. A 58 (2025) 465402 [2406.04561].arxiv.org/abs/2406.04561
  51. [51]J. M. Maldacena, Wilson loops in large N field theories, Phys. Rev. Lett. 80 (1998) 4859 [hep-th/9803002].DOI
  52. [52]E. Witten, Anti-de-Sitter space, thermal phase transition, and confinement in gauge theories, Adv. Theor. Math. Phys. 2 (1998) 505 [hep-th/9803131].
  53. [53]D. E. Berenstein, R. Corrado, W. Fischler and J. M. Maldacena, The Operator product expansion for Wilson loops and surfaces in the large N limit, Phys. Rev. D 59 (1999) 105023 [hep-th/9809188].DOI
  54. [54]L. F. Alday and J. Maldacena, Null polygonal Wilson loops and minimal surfaces in Anti-de-Sitter space, JHEP 11 (2009) 082 [0904.0663].DOI
  55. [55]D. Pappadopulo, S. Rychkov, J. Espin and R. Rattazzi, OPE Convergence in Conformal Field Theory, Phys. Rev. D 86 (2012) 105043 [1208.6449].DOI
  56. [56]E. Lauria, M. Meineri and E. Trevisani, Radial coordinates for defect CFTs, JHEP 11 (2018) 148 [1712.07668].DOI
  57. [57]E. Lauria, M. Meineri and E. Trevisani, Spinning operators and defects in conformal field theory, JHEP 08 (2019) 066 [1807.02522].DOI
  58. [58]A. M. Ferrenberg, J. Xu and D. P. Landau, Pushing the limits of monte carlo simulations for the three-dimensional ising model, Physical Review E 97 (2018) .DOI
  59. [59]F. Livet, Monte carlo static and dynamic simulations of a three-dimensional ising critical model, Phys. Rev. E 101 (2020) 02231.DOI
  60. [60]L. V. Avdeev, D. I. Kazakov and I. N. Kondrashuk, Renormalizations in supersymmetric and nonsupersymmetric nonAbelian Chern-Simons field theories with matter, Nucl. Phys. B 391 (1993) 333.
  61. [61]D. Gaiotto and X. Yin, Notes on superconformal Chern-Simons-Matter theories, JHEP 08 (2007) 056 [0704.3740].DOI

Paper details

vlnc:W_dejgyhs7
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 5

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

ChatGPT (OpenAI), Claude (Antropic)

View statement
Looking for related papers…
Contents