betaFeedback

WorksPhysics and Astronomy

Metric reconstruction in a Bondi-like gauge

Abstract

Metric perturbations obtained from a Hertz potential in an ingoing radiation gauge (IRG) generically grow in an outgoing coordinate rr at future null infinity, and are therefore not asymptotically flat in the Bondi sense. Hollands and Toomani showed that this growth can be removed, within the Green–Hollands–Zimmerman (GHZ) framework, by an IRG-compatible residual'' gauge transformation together with a carefully chosen choice of the undetermined integration constants'' of the Hertz potential. In this work we turn that proof into a practical algorithm. We show that this entire completion is generated by a single ``Held Master Scalar'' (HMS), which can be thought of as a function on future null infinity. The HMS is obtained from the leading asymptotic piece of the 00-Weyl scalar through a Teukolsky–Starobinsky inversion. We give explicit formulas for the four integration constants of the Hertz potential associated with the 00-Weyl scalar, and for the residual gauge vector in terms of the HMS, thereby bringing the metric perturbation into a Bondi-like gauge. In Schwarzschild the entire construction is diagonal in (ℓ,m)(\ell, m)-modes and every completion field is available in closed form; in Kerr the construction is tri-diagonal. We have numerically implemented the full scheme in (ℓ,m)(\ell,m) and in mm-modes, including the corrector piece of the GHZ framework. We illustrate our scheme numerically for a point-particle on a circular orbit in a puncture scheme in Schwarzschild and in Kerr, by demonstrating the Bondi-like fall-off. We also find agreement with the known Detweiler redshift computations in Schwarzschild and Kerr. Our method directly gives the Bondi news, mass-, and angular momentum aspects, for which we give exemplary results in Kerr.

Introduction

Large-mass-ratio inspirals of a comparatively small companion into a black hole present interesting conceptual challenges, such as the problem of scaling solutions of the Einstein equations, described from a physical perspective in [1], and more recently [2] in a limited scenario permitting complete mathematical control. Because such systems are among the principal targets of the Laser Interferometer Space Antenna [3] there is also a very strong practical motivation for developing accurate models capable of describing the dynamical evolution of the binary, and the emitted gravitational waves, over a very large number of orbits. The large mass ratios of up to 105−10710^5-10^7 expected in practice [4] are so far inaccessible to fully numerical schemes [5], in particular since a quite large number of such simulations corresponding to varying orbital- and black hole parameters would be needed for wave-form modeling [6, 7].

The current state of the art are instead perturbative, semi-analytical methods within the self-force scheme, see [8, 9] as general references. In this scheme, the near field of the small object is typically isolated at various orders in perturbation theory—in practice, second order is considered necessary [10]. The residual field, i.e., the gravitational perturbation field with the small object field extracted, represents the large-scale “trend” of the gravitational field as opposed to the—often infinite-local perturbation, and is thought of as responsible for the self-force on the particle. This self-force gives rise to a gradual change of the orbital parameters, which must be updated throughout the dynamical evolution. Since the gradual change is very slow compared to the time-scale of the gravitational waves (≳ orbital period), it is possible to separate the problem into an evolution equation for the orbital parameters governed by a slow time, and perturbative calculations, at various orders, in a fixed Kerr background geometry and fixed orbital parameters, governed by a fast time [8, 10, 11].

In this paper, we focus on this second problem, which is the main input into the first. In each perturbative order, our problem, therefore, is basically to find a solution, habh_{ab}, to the linearized Einstein equation Ehab=Tab\mathcal{E}h_{ab}=T_{ab} on a fixed Kerr background, where E\mathcal{E} is the linearized Einstein operator1, and TabT_{ab} is the stress tensor at the respective order. In case habh_{ab} represents the residual field at that order, TabT_{ab} will include, besides the point-particle stress tensor associated with the smaller object itself, also pieces arising from the lower order residual metric perturbations, and with the subtraction pieces of the near field (“punctures” [13]), up to the same order. The latter are determined entirely locally [14, 15, 16, 17] and, while complicated, do not pose an essential problem.

There are many different approaches to solving Ehab=\mathcal{E}h_{ab}= TabT_{ab} in practice. A common benchmark criterion is that one would like an habh_{ab} in a well-behaved gauge2. Here, “well behaved” means e.g., that one would not like the metric to contain artificial singularities, or a non-decaying behavior at null-infinity, non-smooth behavior at the horizon, etc. In particular, it is highly preferable to find habh_{ab} in a Bondi-like gauge, such that asymptotic quantities like BMS-charges, memory, or fluxes are readily identifiable, or such that the contribution of habh_{ab} to the stress tensor at the next—in practice second—perturbation order is manageable.

In the present paper, we focus on the metric reconstruction method, originally due to [18, 19] in the vacuum (Tab=0T_{ab}=0) case, but mention e.g., the recently developed Lorenz gauge method [20, 21] or [22] as interesting alternatives. Even though, as our application, we will consider a concrete puncture scheme yielding the residual part of the metric perturbation from an “effective” stress energy tensor TabT_{ab} at first order, and for a circular equatorial orbit of Kerr, our scheme is general and conceptually independent of such restrictions as long as TabT_{ab} has sufficient, and standard for radiating sources, decay (6) at future null infinity.

The broad aim of reconstruction methods is to obtain the metric perturbation habh_{ab} from the spin s=+2s=+2 Weyl scalar ψ\psi, which obeys Teukolsky’s decoupled separable equation for each mode [23]. Such mode decompositions are particularly suitable for systems with periodic sources representing orbiting point-like companions. From ψ\psi, one then obtains a so-called Hertz potential, Φ\Phi, by a well-known and easy inversion [24], and then the metric perturbation as hab=2Re⁡Sab†Φh_{ab}=2\operatorname{Re}S_{ab}^{\dagger}\Phi, where Sab†S_{ab}^{\dagger} is a tensor-valued “reconstruction operator” [19, 25]. Actually, this scheme by itself is inconsistent for generic non-trivial sources TabT_{ab}. But as Green–Hollands–Zimmerman (GHZ) showed [26], it can be adapted by adding a correction piece, xabx_{ab} determined by transport equations, to 2Re⁡Sab†Φ2\operatorname{Re}S_{ab}^{\dagger}\Phi. A practical way to combine the GHZ scheme with the “no-string-gauge” methods by [13, 27], for determining the residual metric perturbation, was proposed later in [28], and implemented for a circular orbit in Schwarzschild in [29]. While the approach [28] avoids a stringlike gauge singularities emanating from the source, it does not by itself produce a metric perturbation in an asymptotically flat gauge.

While far from obvious, it is physically plausible that habh_{ab} actually has an asymptotically flat gauge representative. However, even if it does (which we assume is the case and provide evidence for3) it is non-trivial to actually find this gauge representative, see [30, 31] for recent

works investigating and using asymptotically flat gauges in a self-force setting. In this paper, we instead follow a recent extension of the GHZ metric reconstruction method due to [12], which delivers a gauge vector field ζa\zeta^{a} (and at the same time a particular choice of the non-unique Hertz-potential Φ\Phi) achieving a Bondi-like gauge. The total metric perturbation is hence

hab=2Re⁡Sab†Φ+xab−Lζgab+g˙ab(1)h_{ab}=2\operatorname{Re}S_{ab}^{\dagger}\Phi+x_{ab}-\mathcal{L}_{\zeta}g_{ab}+\dot{g}_{ab} \tag*{(1)}

wherein gabg_{ab} is the Kerr metric, and g˙ab\dot{g}_{ab} a metric perturbation corresponding to an infinitesimal change4 (δM,δa)(\delta M,\delta a) of the Kerr parameters (M,a)(M,a). The reconstructed piece 2Re⁡Sab†Φ2\operatorname{Re}S_{ab}^{\dagger}\Phi and the corrector xabx_{ab} by design are in ingoing radiation gauge (IRG)—meaning a vanishing contraction with the outgoing principal null direction lal^{a}—while g˙ab\dot{g}_{ab} may be presented in IRG by a gauge choice [12 App. C]. Because ζa\zeta^{a} is a “residual” i.e., IRG compatible gauge vector field [32], the entire expression (1) therefore is in IRG. Our Bondi-like gauge means this, plus the remaining four decay conditions (7) on the null-tetrad components of habh_{ab}.

Building on [12], we will present a remarkably simple algorithm for obtaining both ζa\zeta^{a}, and the particular choice of Φ\Phi at the same time. This algorithm is as follows:

  1. Find the leading order asymptotic piece ψ5o\psi^{5o} of the “0” perturbed-Weyl-scalar component ψ\psi (the r−5r^{-5} piece), which is used to

  1. Find a certain “Held Master Scalar” (HMS) fof^{o}, where o\mathord{o} indicates a quantity that is intrinsic to future null infinity, or more pragmatically, a function of u,θ,φu,\theta,\varphi in an outgoing Eddington-like coordinate system. fof^{o} is determined from ψ5o\psi^{5o} by an angular Teukolsky-Starobinsky relation.

  1. Apply certain explicit geometrical differential operators to our HMS fof^{o}, to obtain both the leading pieces Φ3o,…,Φ0o\Phi^{3o},\ldots,\Phi^{0o} (the coefficients of the r3,…,r0r^{3},\ldots,r^{0}-pieces of Φ\Phi, which are undetermined from the inversion relation linking ψ\psi and Φ\Phi), and the components of the residual gauge vector field ζa\zeta^{a}.

Since the corrector xabx_{ab} can be found by three simple integrable [28] transport equations [26] with explicit Green’s function [33] if we want, since it is known how to solve Teukolsky’s equation for ψ\psi with retarded boundary conditions, and since it is known [24] how to solve the inversion problem ψ→Φ\psi\to\Phi, the problem of finding habh_{ab} as a solution to Ehab=Tab\mathcal{E}h_{ab}=T_{ab} in reconstructed form and Bondi-like form near future null infinity is solved by (i)—(iii).

We can consider both a so-called “mm-mode” scheme (factoring out only the e−iωt+imφe^{-i\omega t+im\varphi}-dependence of the solutions), or a full “(ℓ,m)(\ell,m)-mode” scheme (factoring out also the spheroidal harmonics) for (i)—(iii). In general, our implementation architecture supports both schemes, though we mostly describe the mm-mode scheme in Kerr. As an exception from this, we use an (ℓ,m)(\ell,m)-mode scheme for solving the Teukolsky equation for ψ\psi. But we note that also this step could be based entirely on an mm-mode scheme once ψ\psi is given as a numerical solution on an (r,θ)(r,\theta)-grid covering the exterior of Kerr, e.g., using the very recently developed spectral method by [34]. As a consistency check of our scheme, we numerically check that habh_{ab} is in a Bondi-like gauge, and we compute the Detweiler redshift quantity.

Expectedly, the (ℓ,m)(\ell,m)-mode scheme is particularly straightforward in Schwarzschild-spacetime, but we also outline the necessary changes in Kerr. These are mainly due to the fact that the angular GHP-like operators do not act as simple raising or lowering operators, unlike Schwarzschild [35]. We have successfully performed consistency checks of some of our main numerical findings between the mm– and (ℓ,m)(\ell,m) mode schemes.

The concrete proof-of-concept type application of our general method that we consider is to find the first order residual metric perturbation habRh^{\mathrm{R}}_{ab} within a puncture scheme [13], for circular equatorial orbits γ\gamma in Kerr. Here, the concrete problem to be solved is EhabR=TabE\mathcal{E}h^{\mathrm{R}}_{ab}=T^{\mathrm{E}}_{ab}, where TabET^{\mathrm{E}}_{ab} is an effective source taking into account the original point particle source,

Tab=μ∫dT uaub δ4[⋅−γ(T)]/−g,(2)T_{ab}=\mu\int\mathrm{d}T\,u_a u_b\,\delta^4[\cdot-\gamma(T)]/\sqrt{-g}, \tag*{(2)}

(ua=γ˙au^a=\dot{\gamma}^a is the unit tangent) and additionally a stress tensor corresponding to the singular field near the body, called a “puncture”, habPh^{\mathrm{P}}_{ab}. In formulas,

TabE:=Tab−EhabP.(3)T^{\mathrm{E}}_{ab}:=T_{ab}-\mathcal{E}h^{\mathrm{P}}_{ab}. \tag*{(3)}

In concretely constructing TabET^{\mathrm{E}}_{ab} in our setting, we partly rely on previous non-trivial works [16, 29]. The full metric perturbation at first order would then be hab=habP+habRh_{ab}=h^{\mathrm{P}}_{ab}+h^{\mathrm{R}}_{ab}, where habRh^{\mathrm{R}}_{ab} would e.g., be used to compute the self-force near the particle. Although we could do this, we will instead mostly concentrate on the asymptotic region where the technical advance of our new method plays out.

We finally note that, if one can solve the non-trivial problem of constructing TabET^{\mathrm{E}}_{ab} at higher orders in perturbation theory, which includes the problem of punctures at higher orders [9], our method and mm-mode implementation pipeline would directly generalize to this case: We would again find ψ\psi using a some Teukolsky solver, then fit the inversion relation to get Φ\Phi, then use our integration implementation to find χab\chi_{ab}, and then go through the same steps (i)—(iii), which does not use particular features about the orbit or perturbation order.

Conventions for Kerr background and differential operators

Our conventions regarding the Kerr-metric, the Newman-Penrose (NP) [35] – and Geroch-Penrose-Held (GHP) formalisms [36], are the same as e.g., in [26], [12], where one can also find reviews of these formalisms. In particular, the signature of the metric is (+,−,−,−)(+,-,-,-). As in these references, we will actually mainly use Held’s modified GHP calculus [37, 38], in the same conventions as stated in [12]. The reader is not expected to have any familiarity with these formalisms since for our concrete application, it is only necessary to recall the definitions of certain coefficient functions and differential operators.

These are stated in the Kinnersley frame; see, e.g., [26], [12], and Boyer-Lindquist coordinates called (t,r,θ,φ)(t,r,\theta,\varphi), or in outgoing Eddington coordinates called (u=t−r∗,r,θ,φ)(u=t-r_\ast,r,\theta,\varphi) for Kerr, which are related by

dr∗=r2+a2Δdr,dφ∗=dφ−aΔdr,(4)\mathrm{d}r_\ast=\frac{r^2+a^2}{\Delta}\mathrm{d}r,\qquad\mathrm{d}\varphi_\ast=\mathrm{d}\varphi-\frac{a}{\Delta}\mathrm{d}r, \tag*{(4)}

where Δ=r2−2Mr+a2\Delta=r^2-2Mr+a^2. In these conventions, the coefficients that we require, are

ρ=−1r−iacos⁡θ,(5)\rho=-\frac{1}{r-\mathrm{i}a\cos\theta}, \tag*{(5)}

Ψ∘\Psi^\circ, ρ∘\rho^\circ, τ∘\tau^\circ, Ω∘\Omega^\circ, and a certain geometric basis of directional derivative operators, see Table I.

Held quantityValueSpin weight
τ∘\tau^\circ−iasin⁡θ2-\frac{ia\sin\theta}{\sqrt{2}}+1+1
ρ∘\rho^\circ−12-\frac{1}{2}00
Ψ∘\Psi^\circMM00
Ω∘\Omega^\circ−2iacos⁡θ-2ia\cos\theta00
\thorn∂r\partial_r00
\thorn'∂u−12r2−2Mr+a2r2+a2cos⁡2θ∂r\partial_u-\frac{1}{2}\frac{r^2-2Mr+a^2}{r^2+a^2\cos^2\theta}\partial_r00
ð~\widetilde{\eth}−12(∂θ+icsc⁡θ ∂ϕ∗+iasin⁡θ ∂u−scot⁡θ)-\frac{1}{\sqrt{2}}(\partial_\theta+i\csc\theta\,\partial_{\phi_*}+ia\sin\theta\,\partial_u-s\cot\theta)+1+1
ð~′\widetilde{\eth}'−12(∂θ−icsc⁡θ ∂ϕ∗−iasin⁡θ ∂u+scot⁡θ)-\frac{1}{\sqrt{2}}(\partial_\theta-i\csc\theta\,\partial_{\phi_*}-ia\sin\theta\,\partial_u+s\cot\theta)−1-1

Table I. Summary of Held’s GHP quantities in outgoing Eddington coordinates (u,r,θ,ϕ∗)(u,r,\theta,\phi_*) and the Kinnersley frame (taken from [26]). On a mode with dependence e−iωu+imϕ∗e^{-i\omega u+im\phi_*} (or with e−iωt+imϕe^{-i\omega t+im\phi} in Boyer–Lindquist coordinates), one puts ∂u→−iω\partial_u\to-i\omega and ∂ϕ∗→im\partial_{\phi_*}\to im. ð~\widetilde{\eth} and ð~′\widetilde{\eth}' are thereby equal to the spin-raising and spin-lowering operators when acting on spin-weighted spherical harmonics; see, e.g., [28 App. C].

Held’s ∘\mathord{\circ}-notation: As a matter of notation, in the Held-formalism, a ∘\circ on a quantity X∘X^\circ intrinsically means a GHP scalar that is annihilated by the GHP-operator P\mathrm{P}; pragmatically this just means that it is independent of rr in Eddington coordinates in our conventions. By construction [37, 38], any Held operator- or NP coefficient in Table I preserves this property, unlike the usual GHP operators.

The quantity ss is the spin weight of a GHP scalar or operator [36]. It must be taken into account for every quantity these operators are acting on, and a GHP operator with the indicated weight will shift these by the amount associated with the operator. A nice feature of the above Held operators– and scalars is that they lead to manifestly gauge invariant equations, which thereby could be converted readily from the Kinnersley frame to any other one by a simple local boost/rotation factor associated with the NP tetrad change, see, e.g., [12]. This would be practically useful if we wanted to convert our abstract formulas e.g., to the Hartle-Hawking– or Carter frames, and is also of course geometrically much more satisfying.

The asymptotically flat reconstruction scheme

Here we describe our asymptotically flat reconstruction scheme for obtaining (1). It is extracted from [12, Thm. 4] and its derivation in [12 App. J]. The theorem applies rigorously to (smooth) solutions to the linearized Einstein equations (EE) Ehab=Tab\mathcal{E}h_{ab}=T_{ab}, under the following

Assumptions:

  1. The NP-components of the stress energy tensor TabT_{ab} in our Kinnersley frame has the standard5 behavior

Tnn=O(1r2),T_{nn}=O\left(\frac{1}{r^2}\right),
Tln,Tmmˉ,Tnm=O(1r3)(6)T_{ln},T_{m\bar m},T_{nm}=O\left(\frac{1}{r^3}\right) \tag*{(6)}
Tlm,Tmm,Tll=O(1r4),T_{lm},T_{mm},T_{ll}=O\left(\frac{1}{r^4}\right),

towards I+\mathscr{I}^+, i.e., as r→∞r\to\infty, at fixed (u,ϕ∗,θ)(u,\phi_*,\theta). The conditions are equivalent to the Bondi coordinate-type conditions given e.g., in [39].

  1. There exists some gauge such that the NP components of habh_{ab} have asymptotic expansions with decay orders

hll,hlm,hln,hmmˉ=O(1r2),(7)h_{ll},h_{lm},h_{ln},h_{m\bar m}=O\left(\frac{1}{r^2}\right), \tag*{(7)}
hnn,hnm,hmm=O(1r),h_{nn},h_{nm},h_{mm}=O\left(\frac{1}{r}\right),

as r→∞r\to\infty, at fixed (u,ϕ∗,θ)(u,\phi_*,\theta). These conditions would be satisfied if one were to assume that there exists a Bondi-gauge in the usual (coordinate) sense for habh_{ab}, see [12 App. D]. In an IRG, all NP components involving at least one “ll” would vanish.

  1. There exist δM,δa\delta M,\delta a such that, subtracting a corresponding zero mode in IRG satisfying (7) [28] (see, e.g., [12 Eq. C.1] for a concrete formula)

hab→hab−g˙ab,(8)h_{ab}\to h_{ab}-\dot{g}_{ab}, \tag*{(8)}

the leading expansion coefficients in the asymptotic expansion all go to zero as u→−∞u\to-\infty.

  1. At I+\mathscr{I}^+ the Bondi news tensor satisfies the usual Price decay law [40] as u→∞u\to\infty.

Theorem: [12 Thm. 4] There exists a gauge in which habh_{ab} takes the form (1), and such that it is in addition in a Bondi-like gauge.

Bondi-like gauge: This means that habh_{ab} is in IRG, i.e. hlm=hln=hll=0h_{lm}=h_{ln}=h_{ll}=0, and that the remaining four asymptotic behaviors in (7) hold for the non-zero NP components. This gauge could easily be converted to an actual Bondi gauge in the traditional (coordinate) sense [12 App. D], but for the purposes of extracting quantities associated with gravitational radiation, or for using habh_{ab} to build the source at the next perturbative order, the Bondi-like gauge appears just as good if not better. Of course in practice, one does not know habh_{ab} from the outset, so one does not know whether conditions 2)–4) on the metric perturbation hold unless one can appeal to abstract mathematical theorems to this effect! We are unfortunately not aware of such abstract theorems in the specific self-force settings below, mainly due to the fact that the particle exists forever. We therefore need to assume that the conclusions hold. Then, we can extract the following prescription from [12 Thm. 4], to actually find the pieces xabx_{ab}, Φ\Phi, ζa\zeta^{a}, g˙ab\dot{g}_{ab} in the decomposition (1) for habh_{ab}.

Algorithm: Step 1) The perturbed Teukolsky scalar6

ψ≡δClmlm(9)\psi\equiv\delta C_{lmlm} \tag*{(9)}

of spin-weight s=+2s=+2, is determined through Teukolsky’s equation [23],

Oψ=SabTab,(10)\mathcal{O}\psi= S^{ab}T_{ab}, \tag*{(10)}

where SabS^{ab} is Teukolsky’s source operator, and O\mathcal{O} is Teukolsky’s wave operator, see App. § 2.0.2 for their concrete expressions in terms of our operators in Table I. We assume retarded boundary conditions7. Then by the peeling theorem8

ψ=ψ∘r5+O(1r6).(11)\psi= \frac{\psi^{\circ}}{r^{5}} + O\left(\frac{1}{r^{6}}\right). \tag*{(11)}

Step 2) The Hertz potential Φ\Phi is obtained from the well-known [41] inversion relation9

∂r4Φ‾=2ψ.(12)\partial_{r}^{4}\overline{\Phi}=2\psi. \tag*{(12)}

We then have a unique minimal solution, i.e., such that Φmin⁡=O(r−1)\Phi^{\min}=O(r^{-1}). However, this minimal solution is not the one appearing in the asymptotically flat IRG metric (1)10. Instead, we have to add to the minimal solution specific terms called completion pieces Φadj\Phi^{\mathrm{adj}}:

Φmin⁡⟶Φ=Φmin⁡+Φadj(13)\Phi^{\min}\longrightarrow\Phi=\Phi^{\min}+\Phi^{\mathrm{adj}} \tag*{(13)}
Φadj≡Φ0∘+Φ1∘ρ+Φ2∘ρ2+Φ3∘ρ3.(14)\Phi^{\mathrm{adj}}\equiv\Phi^{0\circ}+\frac{\Phi^{1\circ}}{\rho}+\frac{\Phi^{2\circ}}{\rho^{2}}+\frac{\Phi^{3\circ}}{\rho^{3}}. \tag*{(14)}

These terms are growing as r3r^{3} for r→∞r\to\infty, and this is actually essential: their contribution under the reconstruction operator Sab†S^{\dagger}_{ab} combines with Lζgab\mathcal{L}_{\zeta}g_{ab}, in (1), furthermore leading to a delicate cancelation of various subleading terms and leaving in the end a perturbation with Bondi-like falloff at future null infinity [12 Thm. 4]. For this, a specific choice of the growing terms must of course be made; in fact, by working through the proof of [12 App. J], one can see that the entire completion is generated by a single Held Master Scalar (HMS) f∘f^{\circ} of spin weight +2+2, defined by

2P~′3ψ5∘=ð~4ð~4fˉ∘−9Ψ∘Ψˉ∘P~′2fˉ∘.(15)2\tilde{\mathrm{P}}^{\prime3}\psi^{\circ}_{5}=\tilde{\eth}^{4}\tilde{\eth}^{4}\bar{f}^{\circ}-9\Psi^{\circ}\bar{\Psi}^{\circ}\tilde{\mathrm{P}}^{\prime2}\bar{f}^{\circ}. \tag*{(15)}

The four Held integration constants appearing in (13) are determined from the HMS fˉ∘\bar{f}^{\circ} by the triangular system

Φ3∘=−P~′fˉ∘,(16)\Phi^{3\circ}=-\tilde{\mathrm{P}}^{\prime}\bar{f}^{\circ}, \tag*{(16)}
Φ2∘=−ð~′2fˉ∘,(17)\Phi^{2\circ}=-\tilde{\eth}^{\prime2}\bar{f}^{\circ}, \tag*{(17)}
P~′Φ1∘=−12ð~′2ð~2fˉ∘−(2τ~′ð~+32Ψ∘)P~′fˉ∘,(18)\tilde{\mathrm{P}}^{\prime}\Phi^{1\circ}=-\frac{1}{2}\tilde{\eth}^{\prime2}\tilde{\eth}^{2}\bar{f}^{\circ}-\left(2\tilde{\tau}^{\prime}\tilde{\eth}+\frac{3}{2}\Psi^{\circ}\right)\tilde{\mathrm{P}}^{\prime}\bar{f}^{\circ}, \tag*{(18)}
P~′2Φ0∘=−16ð~′3ð~3fˉ∘−(τ~′ð~′ð~2+12Ψ∘ð~′ð~)P~′fˉ∘,(19)\tilde{\mathrm{P}}^{\prime2}\Phi^{0\circ}=-\frac{1}{6}\tilde{\eth}^{\prime3}\tilde{\eth}^{3}\bar{f}^{\circ}-\left(\tilde{\tau}^{\prime}\tilde{\eth}^{\prime}\tilde{\eth}^{2}+\frac{1}{2}\Psi^{\circ}\tilde{\eth}^{\prime}\tilde{\eth}\right)\tilde{\mathrm{P}}^{\prime}\bar{f}^{\circ}, \tag*{(19)}

noting that P~′→−iω\tilde{\mathrm{P}}^{\prime}\to-i\omega in modes.

Step 3) We build ζl′,ζn′,ζm′\zeta'_{l},\zeta'_{n},\zeta'_{m}—which give the residual gauge vector field ζa\zeta^{a} [32], by differentiation formulas found, e.g., in [12 App. E]—from

ζˉm∘=ð~fˉ∘,(20)\bar{\zeta}^{\circ}_{m}=\tilde{\eth}\bar{f}^{\circ}, \tag*{(20)}
P~′ζl∘=−Re⁡(ð~2fˉ∘),(21)\tilde{\mathrm{P}}^{\prime}\zeta^{\circ}_{l}=-\operatorname{Re}\left(\tilde{\eth}^{2}\bar{f}^{\circ}\right), \tag*{(21)}
P~′ζn∘=−Re⁡(ð~′ð~3fˉ∘−ρ′ð~2fˉ∘−2τ~∘P~′fˉ∘−12Ω∘ð~2P~′fˉ∘).(22)\tilde{\mathrm{P}}^{\prime}\zeta^{\circ}_{n}=-\operatorname{Re}\left(\tilde{\eth}^{\prime}\tilde{\eth}^{3}\bar{f}^{\circ}-\rho^{\prime}\tilde{\eth}^{2}\bar{f}^{\circ}-2\tilde{\tau}^{\circ}\tilde{\mathrm{P}}^{\prime}\bar{f}^{\circ}-\frac{1}{2}\Omega^{\circ}\tilde{\eth}^{2}\tilde{\mathrm{P}}^{\prime}\bar{f}^{\circ}\right). \tag*{(22)}

from the HMS fˉ∘\bar{f}^{\circ}, noting again that P~′→−iω\tilde{\mathrm{P}}^{\prime}\to-i\omega in modes. In fact, for (1), we only need to evaluate not ζa\zeta^{a} itself but Lζgab\mathcal{L}_{\zeta}g_{ab}, which is determined directly by ζl′,ζn′,ζm′\zeta'_{l},\zeta'_{n},\zeta'_{m} through the formulas in App. § 2.0.1.

Step 4) We determine xabx_{ab} from the GHZ transport equations by a backward integration in rr from I+\mathcal{I}^{+}, see, e.g., [28 App. H], and we determine the zero mode g˙ab\dot{g}_{ab} by Abbott–Deser type integrals from TabT_{ab}, see e.g., [28]. These last steps are actually even easier in our model problem as we will see, since the stress tensor is non-zero only locally near the particle.

We thereby have all pieces in (1) giving us the metric perturbation in a Bondi-like gauge in IRG. For completeness, the spin weights of every object appearing in the construction are collected in Table II.

f∘f^\circfˉ∘\bar{f}^\circΦn∘\Phi^{n\circ}ζl∘,ζn∘\zeta^\circ_l, \zeta^\circ_nζm∘\zeta^\circ_mζˉm∘\bar{\zeta}^\circ_m
Spin weight ss+2+2−2-2−2-200+1+1−1-1
(−1)s(-1)^s++++++++−-−-

Table II. Spin weights of the GHP and reconstruction fields entering the adjusted reconstruction. The second row is the sign (−1)s(-1)^s appearing in the conjugation rule (Xˉ)ω,ℓ,m=(−1)s+mX−ω,ℓ,−m(\bar{X})_{\omega,\ell,m}=(-1)^{s+m}X_{-\omega,\ell,-m} for mode sum coefficients (23).

Circular orbit in Schwarzschild

Here we outline our scheme for a point particle on a circular orbit in Schwarzschild. Due to the high symmetry, it is convenient to expand any spin-ss quantity sX{}_{s}X in this spacetime in modes as

sX=∑ω,ℓ,msXωℓm(r) sYℓm(θ)e−iωt+imφ,(23){}_{s}X=\sum_{\omega,\ell,m}{}_{s}X_{\omega\ell m}(r)\,{}_{s}Y_{\ell m}(\theta)e^{-i\omega t+im\varphi}, \tag*{(23)}
hllh_{ll}hlnh_{ln}hnnh_{nn}hmmˉh_{m\bar{m}}hnmh_{nm}hnmˉh_{n\bar{m}}hmmh_{mm}
Spin weight ss00000000+1+1−1-1+2+2
(−1)s(-1)^s++++++++−-−-++

Table III. Spin weights of the metric perturbation.

where our conventions for the spin-weighted spherical harmonics sYℓm(θ)_sY_{\ell m}(\theta) are the same as in [12]. For generic orbits, possible frequencies are the harmonics of the basic orbital frequencies (Ωr,Ωθ,Ωφ)(\Omega_r,\Omega_\theta,\Omega_\varphi) labeled by three integers. For a circular orbit as considered here, this reduces to ω=mΩ\omega=m\Omega, with Ω≡Ωφ=M/r03\Omega\equiv\Omega_\varphi=\sqrt{M/r_0^3}, where r0r_0 is the radius of the orbit.

Following [16, 17], a puncture habPh^P_{ab} for such an orbit is obtained by the method described in Sec. V A. Then the NP components of the effective stress energy tensor TabeffT^{\mathrm{eff}}_{ab} (3) are formed using this puncture and the stress energy tensor of the particle (2). Using a version of the semi-analytic tools developed in [16, 17], see Sec. V A, one then obtains the (ℓ,m)(\ell,m)-mode expansion (23) of the corresponding effective Teukolsky source in (10). Its expansion coefficients are numerically given as an array on a discrete set of rr-values per mode. The order of the puncture governs the fall-off of the mode amplitudes in ℓ\ell.

With these at hand, one obtains the (ℓ,m)(\ell,m) mode expansion coefficients of the perturbed Weyl-scalar ψ\psi (9) by solving the mode version of Teukolsky’s equation (10), i.e., the radial Teukolsky equation for the modes coefficients (23) of ψ\psi, with the effective Teukolsky source, and with purely downgoing (at the horizon r=2Mr=2M) and purely outgoing (at future null infinity r=∞r=\infty) boundary conditions. We have numerically checked that this ψ\psi satisfies peeling (11), and thereby we can extract the (ℓ,m)(\ell,m) mode-sum coefficients of the leading coefficient,

ψ5∘=∑ω,m,ℓψωℓm5∘ +2Yℓm(θ)e−iωu+imφ,(24)\psi^{5\circ}=\sum_{\omega,m,\ell}\psi^{5\circ}_{\omega\ell m}\,{}_{+2}Y_{\ell m}(\theta)e^{-i\omega u+im\varphi}, \tag*{(24)}

by fitting ψ\psi against r−5r^{-5}. Recall that u=t−r∗u=t-r_* is the Eddington coordinate, and that quantities with a ∘\circ by construction have no rr-dependence. Either by the modal inversion scheme [24], or by simply integrating ψ\psi four times against rr beginning from r=∞r=\infty (in practice an rr-value much larger than both MM and the particle’s orbital radius r0r_0), we get the minimal solution Φmin⁡=O(r−1)\Phi_{\min}=O(r^{-1}) of the inversion relation (12) for the Hertz-potential, in (ℓ,m)(\ell,m)-modes.

Next, we solve the (ℓ,m)(\ell,m)-mode version of our HMS (15). In doing so, we use that P~=−iω\widetilde{\mathcal{P}}=-i\omega in modes, and that the combination of angular operators in (15) is precisely the combination appearing in the Teukolsky-Starobinsky identities [41, 42]—where both observations generalize to Kerr. The (ℓ,m)(\ell,m)-mode coefficients fωℓm∘f^\circ_{\omega\ell m} of the HMS are thereby found to be:

fωℓm∘=2iω3Dℓmωψωℓm5∘(25)f^\circ_{\omega\ell m}=\frac{2i\omega^3}{D_{\ell m\omega}}\psi^{5\circ}_{\omega\ell m} \tag*{(25)}

where DℓmωD_{\ell m\omega} is a Teukolsky-Starobinsky constant11. Its value in Schwarzschild is Dℓmω=116(ℓ−1)ℓ2(ℓ+1)2(ℓ+2)+9M2ω2D_{\ell m\omega}=\frac{1}{16}(\ell-1)\ell^2(\ell+1)^2(\ell+2)+9M^2\omega^2.

Using the ladder operator properties of Held’s angular derivatives in terms of spin-weighted harmonics recalled e.g., in [28 App. C], the four Held completion pieces (15) in the Hertz potential are similarly found to be

Φωℓm0∘=−13iω(−1)mDℓmω(26)\Phi^{0\circ}_{\omega\ell m}=-\frac{1}{3}\frac{i\omega(-1)^m}{D_{\ell m\omega}} \tag*{(26)}
Φωℓm1∘×[2BℓBℓ−3iMωBℓ]ψˉ−ω,ℓ,−m5∘,(27)\Phi^{1\circ}_{\omega\ell m} \times\left[2B_\ell B_\ell-3iM\omega B_\ell\right]\bar{\psi}^{5\circ}_{-\omega,\ell,-m}, \tag*{(27)}
Φωℓm2∘=ω2(−1)mDℓmω(2Bℓ−3iMω)ψˉ−ω,ℓ,−m5∘,(28)\Phi^{2\circ}_{\omega\ell m}=\frac{\omega^2(-1)^m}{D_{\ell m\omega}}\left(2B_\ell-3iM\omega\right)\bar{\psi}^{5\circ}_{-\omega,\ell,-m}, \tag*{(28)}
Φωℓm2∘=2iω3 2Bℓ 1Bℓ(−1)mDℓmωψˉ−ω,ℓ,−m5∘,(29)\Phi^{2\circ}_{\omega\ell m}=\frac{2i\omega^3\,{}_{2}B_\ell\,{}_{1}B_\ell(-1)^m}{D_{\ell m\omega}}\bar{\psi}^{5\circ}_{-\omega,\ell,-m}, \tag*{(29)}
Φωℓm3∘=−2ω4(−1)mDℓmωψˉ−ω,ℓ,−m5∘.(30)\Phi^{3\circ}_{\omega\ell m}=-\frac{2\omega^4(-1)^m}{D_{\ell m\omega}}\bar{\psi}^{5\circ}_{-\omega,\ell,-m}. \tag*{(30)}

The residual gauge vector ζa\zeta^a’s building blocks (16) needed to compute Lζgab\mathcal{L}_{\zeta}g_{ab} for the formulas in App. A

are

ζ∘m,ωℓm=−2iω32Bℓ/1BℓDℓmωψωℓm5∘(31)\overset{\circ}{\zeta}_{m,\omega\ell m}=-\frac{2i\omega^{3}\sqrt{{}_{2}B_{\ell}/{}_{1}B_{\ell}}}{D_{\ell m\omega}}\psi^{5\circ}_{\omega\ell m} \tag*{(31)}
ζ∘l,ωℓm=ω22BℓDℓmωψωℓm5∘+c.c.,(32)\overset{\circ}{\zeta}_{l,\omega\ell m}=\frac{\omega^{2}\sqrt{{}_{2}B_{\ell}}}{D_{\ell m\omega}}\psi^{5\circ}_{\omega\ell m}+\mathrm{c.c.}, \tag*{(32)}
ζ∘n,ωℓm=−ω22BℓDℓmω(1Bℓ+12)ψωℓm5∘+c.c.,(33)\overset{\circ}{\zeta}_{n,\omega\ell m}=-\frac{\omega^{2}\sqrt{{}_{2}B_{\ell}}}{D_{\ell m\omega}}\left({}_{1}B_{\ell}+\frac{1}{2}\right)\psi^{5\circ}_{\omega\ell m}+\mathrm{c.c.}, \tag*{(33)}

where “+ c.c.” denotes the mode-space real part, i.e. the addition of (−1)mψˉ−ω,ℓ,−m5∘(-1)^{m}\bar{\psi}^{5\circ}_{-\omega,\ell,-m} inside the same prefactor. We also defined 2Bℓ=12(ℓ−1)ℓ(ℓ+1)(ℓ+2)\sqrt{{}_{2}B_{\ell}}=\frac{1}{2}\sqrt{(\ell-1)\ell(\ell+1)(\ell+2)} and 2Bℓ1Bℓ=12(ℓ+2)(ℓ−1)\frac{{}_{2}B_{\ell}}{{}_{1}B_{\ell}}=\frac{1}{2}(\ell+2)(\ell-1).

In our inward integration scheme, the corrector xabx_{ab}, obtained via the GHZ transport equations, vanishes to the right of the interval (rmin⁡,rmax⁡)(r_{\min},r_{\max}) around the particle where the puncture is windowed. Thus, outside this window, the reconstructed residual metric (1) is in this case simply

habR=2ReSab†Φ−Lζgab+g˙ab(r>rmax⁡).(34)h^{\mathrm{R}}_{ab}=2\mathop{\mathrm{Re}}\mathcal{S}^{\dagger}_{ab}\Phi-\mathcal{L}_{\zeta}g_{ab}+\dot{g}_{ab}\qquad(r>r_{\max}). \tag*{(34)}

The NP components of Lζgab\mathcal{L}_{\zeta}g_{ab} are obtained by applying the formulas of App. A, which drastically simplify for a=0a=0 due to τ∘=Ω∘=0\tau^{\circ}=\Omega^{\circ}=0, mode by mode to (21) in automated form using the spin-raising and lowering properties [35] of Held’s angular derivatives as given in Table I. g˙ab\dot{g}_{ab} is the zero mode in our Bondi-like gauge, see e.g., [12 Eq. C.2], which is determined in the present case by δM=μ\delta M=\mu, δa=j/M\delta a=j/M, with μ\mu the particle’s mass and j=μM/r0−3Mj=\mu\sqrt{M}/\sqrt{r_{0}-3M} the particle’s orbital angular momentum.

Since we have the full corrector xabx_{ab}, we of course have the entire metric perturbation (1) in a mode-decomposed form with coefficients dependent on rr all the way from the horizon to infinity. We will use this to compute the Detweiler redshift at the particle in Sec. V. When we compute asymptotic quantities, see Sec. V for numerical results (in Kerr), we do not need xabx_{ab} in the present first order model application of our scheme. On the other hand, at second order, the effective source no longer is supported only near the particle, so the second order corrector is supported all the way from the horizon to infinity and would be needed for the computation of asymptotic quantities as well.

Circular orbit in Kerr

As our main example, we derive the first order metric perturbation in our asymptotically flat IRG for a circular orbit in Kerr. We could proceed by a mode expansion similar to the Schwarzschild case, where spin-weighted spheroidal functions would now appear. While such an “(ℓ,m)(\ell,m)-mode” scheme is possible, we here describe an “mm-mode” scheme, which seems more promising in general for inclined, elliptical orbits as needed in reality. However, we will briefly describe some changes necessary in order to generalize the (ℓ,m)(\ell,m)-mode scheme to Kerr in Sec. V G, as could be useful for moderately inclined and elliptical orbits.

In the mm-mode scheme, quantities are generally expanded as

sX=∑ω,msXωm(r,θ)e−iωt+imφ,(35){}_{s}X=\sum_{\omega,m}{}_{s}X_{\omega m}(r,\theta)e^{-i\omega t+im\varphi}, \tag*{(35)}

as opposed to (17). Consequently, the mode amplitudes sXωm(r,θ){}_{s}X_{\omega m}(r,\theta) in a sense already include an infinite ℓ\ell-summation. The downside is that, of course, decoupled ordinary differential equations (ODEs) such as the radial and angular Teukolsky equation now become partial differential equations (PDEs) in (r,θ)(r,\theta). The modes therefore have to be stored as an array of number on a 2-dimensional (r,θ)(r,\theta)-grid, and the numerical solution is considerably less straightforward. Fortunately, it turns out that the only PDE in our scheme is the Teukolsky equation (10). On the other hand, the GHZ transport equations for the non-zero corrector components xnn,xmn,xmˉnx_{nn},x_{mn},x_{\bar m n} remain ODEs in rr (for each fixed θ\theta-value), and the equation for the HMS P′\mathcal{P}^{\prime} is an ODE in θ\theta. Furthermore, the inversions needed to find the completion pieces from the HMS in Eqs. (15), (16) remain algebraic since P′=−iω\mathcal{P}^{\prime}=-i\omega on mm-modes.

Comoving punctures

The puncture is a local, analytically constructed approximation to the singular part of the metric perturbation near the particle’s worldline, and it is only ever needed in a neighborhood thereof cut out by a window step-function in rr. We use the high-order construction initiated for a circular orbit in Schwarzschild and a scalar toy problem in [16], and later generalized to circular orbits in Kerr in the spin-2 case by [17].12 It is based on a coordinate system centered on the particle rather than Boyer–Lindquist coordinates. Let γ\gamma be the worldline with proper time TT and four-velocity uau^{a}, and let eαae^{a}_{\alpha} be an orthonormal tetrad along γ\gamma which is parallel transported, i.e. e˙αa=ua\dot{e}^{a}_{\alpha}=u^{a} and whose spatial triad is Fermi–Walker transported. Local spatial coordinates (X,Y,Z)(X,Y,Z) are obtained by shooting geodesics orthogonal to γ\gamma and then Lie-dragging the resulting labels along the congruence,

ua∇aT=1,ua∇a(X,Y,Z)=0,(36)u^{a}\nabla_{a}T=1,\qquad u^{a}\nabla_{a}(X,Y,Z)=0, \tag*{(36)}

so that (∂T)a=ua(\partial_{T})^{a}=u^{a} in a whole neighborhood of γ\gamma in the coordinates (T,X,Y,Z)(T,X,Y,Z), and the particle sits at (X,Y,Z)=0(X,Y,Z)=0 for all TT.

The payoff of (36) is that comoving stationarity becomes triviality in coordinates. If a tensor field Fa1⋯apF_{a_{1}\cdots a_{p}} is stationary in the comoving frame, LuFa1⋯ap=0\mathcal{L}_{u}F_{a_{1}\cdots a_{p}}=0, then its tetrad components obey ∂TFa^1⋯a^p=0\partial_{T}F_{\hat{a}_{1}\cdots\hat{a}_{p}}=0, and the field is a function of the spatial comoving coordinates alone. The local singular field, habPh^{\mathrm{P}}_{ab} of the point particle, and the particle’s stress tensor, TabT_{ab} [2], are of exactly this type. Its dependence on (X,Y,Z)(X,Y,Z) is fixed by subjecting its local expansion in (X,Y,Z)(X,Y,Z) to the EEs EhabP=Tab\mathcal{E}h^{\mathrm{P}}_{ab}=T_{ab}, thereby pushing the information about the particular orbit into the expansion coefficients. This expansion has the general form in terms of frame index components a^\hat{a} for our NP-tetrad ea^a=(na,la,ma,mˉa)e^{a}_{\hat{a}}=(n^{a},l^{a},m^{a},\bar{m}^{a}) [16, 17],

ha^b^P=∑i,j,k,p,qcijkpqa^b^XiYjZkRplog⁡qR,(37)h^{\mathrm{P}}_{\hat{a}\hat{b}}=\sum_{i,j,k,p,q}c^{\hat{a}\hat{b}}_{ijkpq}X^{i}Y^{j}Z^{k}R^{p}\log^{q}R, \tag*{(37)}

where R2=X2+Y2+Z2R^{2}=X^{2}+Y^{2}+Z^{2} where the constant coefficients cijkpqa^b^c^{\hat{a}\hat{b}}_{ijkpq} are determined by the EEs. The order of the puncture dictates the number of expansion terms to be computed but it is always finite13. This general structure survives for a generic bound orbit, but we now specialize to the case of a circular orbit, recording the minimum needed to follow the mm-mode reduction; the construction is given in full in [43], which builds on [16], but we give a brief outline in App. C as forward guidance.

In order to decompose ha^b^Ph^{\mathrm{P}}_{\hat{a}\hat{b}} into mm-modes (35), we require the transformation from body-fixed coordinates (T,X,Y,Z)(T,X,Y,Z) to Boyer–Lindquist coordinates (t,r,θ,ϕ)(t,r,\theta,\phi) in order to integrate (37) against e−iωt+imϕe^{-i\omega t+im\phi}. To write these down for our circular orbit, we define φc:=ϕ−Ωt\varphi_{c}:=\phi-\Omega t, which is a corotating phase, and we introduce

X=r/r0−1Δ(r0),Y=−r0cos⁡θ,Z=zcsin⁡φc2,(38)X=\frac{r/r_{0}-1}{\sqrt{\Delta(r_{0})}},\qquad Y=-r_{0}\cos\theta,\qquad Z=z_{c}\sin\frac{\varphi_{c}}{2}, \tag*{(38)}

together with a comoving time TT that is a fixed linear combination of tt and ϕ\phi and employ the Mathematica [44] package xCobaxCoba [45] for coordinate based tensor manipulations. The constants above are fixed by the orbital radius r0r_{0}, as Ω=(a+r03/M)−1\Omega=(a+\sqrt{r_{0}^{3}/M})^{-1}, and

D02=2aM/r0+r0−3Mr0,zc=2MΔ(r0)r03ΩD0.(39)D_{0}^{2}=\frac{2a\sqrt{M}/r_{0}+r_{0}-3M}{r_{0}},\qquad z_{c}=\frac{2\sqrt{M\Delta(r_{0})}}{\sqrt{r_{0}^{3}}\Omega D_{0}}. \tag*{(39)}

Quantities may be pulled back from body-fixed to Boyer–Lindquist coordinates by these formulas.

Two reductions bring (37) into a form whose mm-modes can be evaluated in closed form. First, powers of ZZ beyond the first are traded for powers of R2−X2−Y2R^{2}-X^{2}-Y^{2}, which leaves at most one explicit factor of ZZ.

Second, that remaining factor is replaced by the single-valued angular variable ξ:=zcsin⁡φc\xi:=z_{c}\sin\varphi_{c}, using Z=12ξ+O(ξ3)Z=\frac{1}{2}\xi+O(\xi^{3}) and truncating at the order of the puncture. The result is

ha^b^P=∑i,j,k,p,qd^ijkpqa^b^XiYjξkRplog⁡qR,(40)h^{\mathrm{P}}_{\hat{a}\hat{b}}=\sum_{i,j,k,p,q}\hat{d}^{\hat{a}\hat{b}}_{ijkpq}X^{i}Y^{j}\xi^{k}R^{p}\log^{q}R, \tag*{(40)}

now with k,q∈{0,1}k,q\in\{0,1\}, so that only four types of angular integral can occur.

Indeed, since ω=mΩ\omega=m\Omega, the mm-mode amplitudes of (40) can be considered as integrals over φc\varphi_{c} at fixed (X,Y)(X,Y). Since R2=ρ02+zc2sin⁡2(φc/2)R^{2}=\rho_{0}^{2}+z_{c}^{2}\sin^{2}(\varphi_{c}/2) with ρ02:=X2+Y2\rho_{0}^{2}:=X^{2}+Y^{2} is linear in cos⁡φc\cos\varphi_{c}, every such integral reduces to a single master function of the form

Jνm=(Rρ0)νΓ(ν+1)Γ(ν+∣m∣+1)Pν∣m∣(R2+ρ022Rρ0),(41)J_{\nu m}=(R\rho_{0})^{\nu}\frac{\Gamma(\nu+1)}{\Gamma(\nu+|m|+1)}P_{\nu}^{|m|}\left(\frac{R^{2}+\rho_{0}^{2}}{2R\rho_{0}}\right), \tag*{(41)}

now with R2=ρ02+zc2R^{2}=\rho_{0}^{2}+z_{c}^{2}, through the dictionary

Rp⟶Jp/2,m,R^{p}\longrightarrow J_{p/2,m},
ξRp⟶zc2i(Jp/2,m−1−Jp/2,m+1),\xi R^{p}\longrightarrow\frac{z_{c}}{2i}\left(J_{p/2,m-1}-J_{p/2,m+1}\right),
Rplog⁡R⟶12∂νJν,m∣ν=p/2,R^{p}\log R\longrightarrow\left.\frac{1}{2}\partial_{\nu}J_{\nu,m}\right|_{\nu=p/2},
ξRplog⁡R⟶zc2i∂ν(Jν,m−1−Jν,m+1)∣ν=p/2.(42)\xi R^{p}\log R\longrightarrow\left.\frac{z_{c}}{2i}\partial_{\nu}\left(J_{\nu,m-1}-J_{\nu,m+1}\right)\right|_{\nu=p/2}. \tag*{(42)}
Equation not extracted
(43)
Equation not extracted
(44)
Equation not extracted
(45)

The entire mm-mode puncture is therefore assembled from associated Legendre functions Pν∣m∣P_{\nu}^{|m|} of a single argument, with no numerical angular quadrature [16]. This is what makes the puncture side of the mm-mode scheme cheap enough to be recomputed at every radial grid point. For generic orbits, part of this structure usefully survives, see App. C.

Effective source

Once we have habPh^{\mathrm{P}}_{ab} as in (40), we multiply it by a radial window function supported on some suitable (rmin⁡,rmax⁡)(r_{\min},r_{\max}) (which could be varied for numerical verification), and afterwards apply the linearized Einstein-operator, E\mathcal{E}. This gives us the effective source [3], in which the δ\delta-function localized piece corresponding to the particle is cancelled analytically. Since the procedure has already been implemented e.g., by [29], we will not describe it in detail here. After this, we apply Teukolsky’s source operator to get the source jTj^{T} in Teukolsky’s equation Oψ=jT\mathcal{O}\psi=j^{T}, see App. B.

Integration of GHZ equations for corrector

The corrector xabx_{ab} does not enter the construction of the HMS and completion pieces require for our Bondi-like gauge, but it is required in the full metric perturbation (1).

In IRG, the corrector has three non-vanishing NP components, xnn,xnm,xmmˉx_{nn},x_{nm},x_{m\bar{m}}. They are found by integrating the GHZ transport equations for them form a triangular system of radial transport equations along the outgoing principal null congruence [26], see e.g., [12 Sec. 3.1.3]. These can be solved by integration [28 App. H]. In principle, in our general scheme [12 Sec. 3.1], see Sec. III, we integrate the GHZ transport equations inward from I+\mathcal{I}^{+} with vanishing data there. In the application considered, the effective source (3) has compact radial support in the worldtube by construction, so xabx_{ab} vanishes identically from the outer edge of the worldtube out to r=∞r=\infty. In that whole region the metric is given by (22) with no corrector at all14.

The mm-mode reduction of the GHZ transport equations is again the substitution (23), after which each level is an ordinary integration in rr at fixed z=cos⁡θz=\cos\theta. The two-dimensional problem therefore decouples into NzN_z independent radial problems, and this—not the Teukolsky equation—is the sense in which the corrector is the easy part of the mm-mode scheme. Two of the three levels require a double integration in rr; the third only a single integration.

Each radial problem is discretized by Chebyshev collocation on two patches meeting at the particle, with interface conditions imposed on the value and the derivative, so that the non-smoothness of the windowed effective source at r=r0r=r_0 is never differentiated across.

Weyl scalar and Hertz potential

This is the one genuinely hard step of the mm-mode scheme, and the only place where a PDE has to be solved. The Teukolsky wave operator O\mathcal{O} and source jTj^T (obtained from TabET_{ab}^{\mathrm{E}}) for ψ\psi take a compact form in the Held-type operators and coefficients of tbl:1, which we record in App. B, see (B1), (B1). In outgoing Eddington coordinates, in which P=∂r\mathcal{P}=\partial_r and P~=∂u−(r2+a2z2)−1Δ∂r\widetilde{\mathcal{P}}=\partial_u-(r^2+a^2z^2)^{-1}\Delta\partial_r, the resulting equation is, schematically

A^∂r2ψ+2∂u∂rψ+B^∂rψ+C^ψ=jT,(46)\widehat{A}\partial_r^2\psi+2\partial_u\partial_r\psi+\widehat{B}\partial_r\psi+\widehat{C}\psi=j^T, \tag*{(46)}

with coefficients A^\widehat{A}, B^\widehat{B}, C^\widehat{C} that are obtained by substituting the values of the Held quantities in tbl:1 into the formulas of App. B. These are operator-valued coefficient functions of (r,z=cos⁡θ)(r,z=\cos\theta): only A^=−(r2+a2z2)−1Δ\widehat{A}=-(r^2+a^2z^2)^{-1}\Delta is a plain function of (r,z)(r,z), while B^\widehat{B} contains ð~\widetilde{\eth} and ð~′\widetilde{\eth}' separately, and C^\widehat{C} contains them only through the combination ð~ð~′\widetilde{\eth}\widetilde{\eth}'. Note also that C^\widehat{C} carries no radial derivatives.

In the mm-mode reduction we should replace ∂u→−iω\partial_u\to-i\omega and ∂φ∗→im\partial_{\varphi_*}\to im in (31). The mixed derivative and the ∂u\partial_u term inside C^\widehat{C} then become algebraic, and

A^∂r2ψmω+(B^mω−2iω)∂rψmω+C^mωψmω=jmωT.(47)\widehat{A}\partial_r^2\psi_{m\omega}+(\widehat{B}_{m\omega}-2i\omega)\partial_r\psi_{m\omega}+\widehat{C}_{m\omega}\psi_{m\omega}=j^T_{m\omega}. \tag*{(47)}

Because ð~\widetilde{\eth} and ð~′\widetilde{\eth}' still carry ∂z\partial_z by tbl:1, (32) remains a PDE in (r,z)(r,z) at each (m,ω)(m,\omega).

We solve it with retarded15 boundary conditions. In the future, we intend to use a multidomain spectral method [34, 46], with domain boundaries placed at the edges of the worldtube so that the windowed effective source is smooth on each domain. However, in the present analysis, we use standard (ℓ,m)(\ell,m)-mode Teukolsky solvers in this step [47, 48, 49]. We then verify a posteriori that the solution satisfies peeling (11), so that ψ0\psi^0 may be read off as the coefficient of r−5r^{-5}.

By the inversion relation (12), the Hertz potential Φ\Phi is obtained by integrating ψ\psi inward in rr four times—in modes, ψ\psi at (m,ω)(m,\omega) is assembled from ψ\psi at (−m,−ω)(-m,-\omega) by the conjugation rule quoted with Table II—starting from a radius much larger than both M,r0M,r_0 and taking vanishing data there. This selects precisely the minimal solution Φmin⁡=O(r−1)\Phi^{\min}=O(r^{-1}), and the growing in rr pieces that are left undetermined by (12) are exactly the Held integration constants Φ0,…,Φ03\Phi^0,\ldots,\Phi^3_0 supplied by the completion scheme of Sec. III, where we should concretely substitute the entries of tbl:1 into (15) with P~′→−iω\widetilde{\mathcal{P}}'\to-i\omega, ∂φ∗→im\partial_{\varphi_*}\to im.

HMS and residual gauge vector

For this completion, and for the residual gauge vector ζa\zeta^a in (1), we next require the HMS f0f^0, determined by (14). In mm-modes, this is an 8th order ODE in z=cos⁡θz=\cos\theta. If we do not want to perform an (ℓ,m)(\ell,m)-mode reduction, which would render this equation algebraic by (19), we need to solve this ODE. Intrinsically, the HMS f0f^0 is smooth, i.e., it is smooth in the sense of a mathematical object called a section in a “GHP/Held-bundle”, see, e.g., [12 Sec. 2.1] for explanation. With our conventions of coordinates and NP tetrads, this corresponds to certain boundary conditions at the poles. We solve our ODE by collocation on Legendre-Gauss–Lobatto nodes in zz, subject to these boundary conditions. Two ingredients make this practical.

The first is pole factorization. For a spin-weight-ss GHP/Held quantity XX at azimuthal number mm intrinsic smoothness translates into a certain (singular) endpoint behavior in our NP-frame. It is convenient to factor this behavior out and work throughout with the regular reduced amplitude X^\widehat{X} defined by

X=(1−z)∣m+s∣/2(1+z)∣m−s∣/2X^.(48)X=(1-z)^{|m+s|/2}(1+z)^{|m-s|/2}\widehat{X}. \tag*{(48)}

In this representation Held’s angular derivatives (see Table I) act as first-order operators with polynomial coefficients, of the general form

ð~ → 12[C+(m,s,z)Dz+B+(m,s,z)−aωC+(m,s,z)](49)\widetilde{\eth}\ \to\ \frac{1}{\sqrt{2}}\left[C_{+}(m,s,z)D_z+B_{+}(m,s,z)-a\omega C_{+}(m,s,z)\right] \tag*{(49)}

and similarly for ð~′\widetilde{\eth}' with coefficients C−C_{-}, B−B_{-} and the opposite sign on the undifferentiated term. Here C±C_{\pm} and B±B_{\pm} are polynomials of degree at most one in zz, fixed by the signs of m±sm\pm s, and DzD_z is the Legendre differentiation matrix representing ∂z\partial_z. Because the removed factor in (48) vanishes at the poles, no quantity in the chain ever has to be evaluated at a coordinate singularity.16

The second is that (15) is solved as a dense linear system rather than integrated. The left-hand side is assembled by eight successive applications of (49), four of ð~\widetilde{\eth} and four of ð~′\widetilde{\eth}'; applying this composite operator to each collocation basis vector in turn gives the Nz×NzN_z\times N_z matrix column by column (here NzN_z is the number of collocation points). The system is row- and column-equilibrated, factorized by full-pivot LU (a method that decomposes a matrix into a product of a lower triangular matrix and an upper triangular matrix to enhance numerical stability), and refined iteratively; the relative residual and the condition number of the equilibrated matrix are returned alongside the solution and are the primary diagnostics of the step.

With f^ωm∘\hat{f}^{\circ}_{\omega m} in hand, the four Held integration constants (15) and the components of ζa\zeta^{a} (16) are formed on the same grid by further applications of (49). Since Φ\Phi with the growing completion pieces is a cubic polynomial in ρ−1\rho^{-1} (5) and Sa^b^†S^{\dagger}_{\hat{a}\hat{b}} is second order in rr-derivatives, each NP component of the adjusted residual field perturbation is returned as

ha^b^R=Aa^b^(1)r+Aa^b^(0)+O(1r)(50)h^{\mathrm{R}}_{\hat{a}\hat{b}}=A^{(1)}_{\hat{a}\hat{b}}r+A^{(0)}_{\hat{a}\hat{b}}+O\left(\frac{1}{r}\right) \tag*{(50)}

with the two Laurent polynomial coefficients stored as arrays over the zz nodes, separately for the reconstructed piece, the gauge piece, and their sum. The Bondi falloff is then simply the statement that Aa^b^(1)=Aa^b^(0)=0A^{(1)}_{\hat{a}\hat{b}}=A^{(0)}_{\hat{a}\hat{b}}=0 at every collocation node for the nnnn, nmnm and mmmm NP-tetrad components17, which can be checked pointwise without any mode sum.

Numerical results for ha^b^Rh^{\mathrm{R}}_{\hat{a}\hat{b}}

We begin this section with benchmarks of the mm-mode chain. So that every intermediate object can be compared against a “closed-form” reference, the runs reported here were first performed at a=0a=0: the operators, the grid and the reconstruction are the Kerr ones described above, but the background is Schwarzschild, where the (ℓ,m)(\ell,m) sums are available in closed form, see Sec. IV. All figures use a circular geodesic at r0=10Mr_0=10M with M=1M=1, fitted ψ\psi data summed through ℓ=20\ell=20, and Nz=21N_z=21 Legendre–Gauss–Lobatto (LGL) nodes in z=cos⁡θz=\cos\theta.

Finding the HMS f∘f^{\circ}. Figure 1 compares the collocation solution of the mm-mode scheme of § 2 E for the HMS with the (ℓ,m)(\ell,m)-scheme in Sec. IV (ℓ\ell-summed HMS) for m=2,3,4m=2,3,4. The maximum relative complex HMS errors are 9.30×10−109.30\times10^{-10}, 5.44×10−115.44\times10^{-11} and 8.33×10−128.33\times10^{-12}, with relative operator-equation residuals for the analytic HMS of 1.92×10−71.92\times10^{-7}, 2.94×10−82.94\times10^{-8} and 8.03×10−98.03\times10^{-9}. The errors fall steeply with mm, as expected from the pole factorization (48): the residual function X^\hat{X} becomes smoother as ∣m∣|m| grows, so the spectral representation converges faster. The equilibrated condition number of the discrete operator falls correspondingly, from 8.6×1078.6\times10^{7} at m=2m=2 to 4.9×1054.9\times10^{5} at m=4m=4, which is why the equilibrated full-pivot solve with iterative refinement is used rather than a plain factorization. This validates both the ℓ\ell-summed input and the mm-mode seed inversion.

Figure 1. Validation of the mm-mode HMS for a=0a = 0. Top row: the modulus of Φ∘0\Phi^0_{\circ} on the Nz=21N_z = 21 LGL grid (circles), obtained by solving (34) in z=cos⁡θz = \cos\theta, against the analytic Schwarzschild ℓ\ell sum (solid). Bottom row: the pointwise complex error relative to max⁡∣exact∣\max|\text{exact}|. The quoted operator residual is the relative residual of the reduced angular equation when the analytic form is substituted, and measures the discretization rather than the solve.

Cancellation and Bondi falloff. The central claim of Sec. III is that the linear in rr and constant asymptotic expansion orders carried separately by 2Re⁡Sa^b^†Φ2\operatorname{Re}S^{\dagger}_{\hat{a}\hat{b}}\Phi and Lζga^b^\mathcal{L}_{\zeta}g_{\hat{a}\hat{b}} cancel in the sum (34), leaving a perturbation with Bondi-like falloff (here hatted indices a^\hat{a} indicate NP-frame components). Figure 2 exhibits this cancellation in the (ℓ,m)(\ell,m)-mode scheme. Across 1254 nonstationary radiative mode components through ℓ=20\ell=20, the largest relative cancellation error in the growing and constant Laurent coefficients is 4.90×10−164.90\times10^{-16}, i.e. at the level of double precision. Direct finite-radius sums at z=0.37z=0.37 for m=2,3m=2,3 show hnnh_{nn}, hnmh_{nm} and hmmh_{mm} approaching 1/r1/r between r=20Mr=20M and r=2000Mr=2000M, with fitted large-radius slopes between −1.003-1.003 and −1.000-1.000. The residual drift from −1-1 is the expected contamination from the subleading log⁡r/r2\log r/r^2 and 1/r21/r^2 terms at finite radius, and shrinks as the fitting window is pushed outward.

Circular Schwarzschild orbit mode reconstruction

Figure 2. (ℓ,m)(\ell,m) mode scheme reference for the adjustment (22), built from the closed-form Schwarzschild (ℓ,m)(\ell,m) components summed at fixed mm through ℓ=20\ell= 20, evaluated at z=cos⁡θ=0.37z = \cos\theta= 0.37, u=φ=0u = \varphi= 0. Each panel shows the reconstructed piece ∣2Re⁡Sa^b^Φ∣|2\operatorname{Re} S^{\hat a\hat b}\Phi|, the gauge piece ∣Lζga^b^∣|\mathcal{L}_{\zeta}g_{\hat a\hat b}|, their sum, and the fitted slope coefficient. We clearly see that the individually growing pieces cancel to leave a 1/r1/r tail.

mm-mode scheme. Figure 3 repeats the radial test with the full mm-mode pipeline in place of the modal reference: the +m+m and −m-m adjustment scalars are obtained by collocation, the reflected partner being the conjugate of the reduced −m-m adjustment scalars since the angular harmonics already supply the odd-mm reflection phase, and all subsequent angular derivatives are taken spectrally. At the interior node z=0.3020z=0.3020 the six plotted components again have large-radius slopes between −1.003-1.003 and −1.000-1.000. Across all interior nodes the largest relative difference from the modal reference of Figure 2 is 1.04×10−61.04\times10^{-6} for m=2m=2 and 1.54×10−71.54\times10^{-7} for m=3m=3, while the largest relative residual in the growing and constant Laurent coefficients is 2.24×10−122.24\times10^{-12}. The cancellation is therefore not an artifact of the mode sum: it survives the spectral realization of the Held operators, which is the only form

Six component plots for circular Schwarzschild orbit m-mode reconstruction

Figure 3. The same six components as Figure 2, constructed instead from the mm-mode scheme on the Nz=21N_z=21 grid and evaluated at the interior node z=cos⁡θ=0.3020z=\cos\theta=0.3020. The reconstruction forms Φ0∘\Phi^{0\circ} through Φ3∘\Phi^{3\circ}, applies the spectral Held angular derivatives for Sa^b^†ΦS^{\dagger}_{\hat a\hat b}\Phi and Lζga^b^\mathcal{L}_{\zeta}g_{\hat a\hat b}, and sums the complex Laurent coefficients directly at each radius, without ever projecting back onto individual (ℓ,m)(\ell,m) modes.

available in Kerr.

Detweiler redshift. This is among the simplest observables in the self-force context at linear order. Denoting the (non-normalized) circular orbit’s tangent by ua=(∂t)a+Ω(∂ϕ)au^a=(\partial_t)^a+\Omega(\partial_\phi)^a, the first order gauge invariant redshift observable relative to a distant observer tangent to ta=(∂t)at^a=(\partial_t)^a is [8, 50]

δz=12habRuaub\delta z=\frac{1}{2}h^R_{ab}u^au^b

in a gauge such that LuhabR=0\mathcal{L}_u h^R_{ab}=0. It is invariant under gauge transformations LXgab\mathcal{L}_Xg_{ab} such that [X,u]a=0[X,u]^a=0 [50 App. B]. In particular, this holds for each mode of our gauge vector field ζa\zeta^a. In fact, using only the modal time and angular dependence, one can easily see that each mode contributes

uaubLζgab→−2itaua(mΩ−ω)ζbub(51)u^au^b\mathcal{L}_{\zeta}g_{ab}\to-2it^au_a(m\Omega-\omega)\zeta^bu_b \tag*{(51)}

which clearly vanishes as ω=mΩ\omega=m\Omega. However, this is not manifestly obvious when we determine Lζgabuaub\mathcal{L}_{\zeta}g_{ab}u^au^b through the formulas in App. § 2.0.1. But Figure 4 confirms this: over 70 modes the maximum helical value is 2.42×10−192.42\times10^{-19}, at roundoff, while ∣uaζa∣\lvert u^a\zeta_a\rvert ranges over some twelve decades in the same modes. Detuning the frequency by δω=0.004\delta\omega=0.004 raises the maximum to 3.93×10−33.93\times10^{-3}, confirming that the null result stems from mΩ=ωm\Omega=\omega, and not an accidental cancellation or a quantity that was never computed.

Gauge-vector contribution to $h_{uu}$ for a Kerr circular orbit

Figure 4. Gauge vector ζa\zeta^a contribution to habRuaubh^{\mathrm{R}}_{ab}u^a u^b in (1) for the Kerr (a=0.667Ma = 0.667M) circular orbit (r0=10Mr_0 = 10M), over 70 modes with 2≤ℓ≤82 \le\ell\le8 and m≠0m \ne0. Left: the worldline contraction ∣uaζa∣|u^a\zeta_a|, which is generically nonzero. Center: the helical pullback ∣Lζgabuaub∣|\mathcal{L}_{\zeta}g_{ab}u^a u^b| evaluated on shell at ω=mΩ\omega= m\Omega. Right is the control quantity 2i(ubtb)(ω−mΩ)(uaζa)2i(u^b t_b)(\omega- m\Omega)(u_a\zeta^a), with ω\omega detuned. Color scales are log⁡10\log_{10} and differ between panels.

The remaining non-gauge pieces alone in habRh^R_{ab} in our decomposition (1) therefore give the Detweiler redshift. The values we obtained for habRuaubh^R_{ab}u^au^b are: −0.2160630(3)-0.2160630(3) (a=0a=0) and −0.19847(1)-0.19847(1) (a=0.667Ma=0.667M), in agreement with the no-string GHZ field [29] and a traditional radiation-gauge (CCK) metric-reconstruction calculation [51]. In Figure 5 we show the approach of the partial ℓ\ell-sums in the calculation of habRuaubh^R_{ab}u^au^b to the reference value: namely Eq. (1) times uaubu^au^b when decomposing the terms “(2Re⁡Sab†Φ+xab)uaub(2\operatorname{Re}S^\dagger_{ab}\Phi+x_{ab})u^au^b” into (ℓ,m)(\ell,m)-modes and summing first over ℓ:∣m∣→ℓmax⁡\ell: |m|\to\ell_{\max}, then over m:−20→20m:-20\to20 and then adding a numerically-fitted tail for ∣m∣>20|m|>20.

Partial $\ell$-sums in the calculation of $h^{\mathrm{R}}_{ab}u^a u^b$

Figure 5. Partial ℓ\ell-sums in the calculation of habRuaubh^{\mathrm{R}}_{ab}u^a u^b for a=0a = 0 (left) and a=0.667Ma = 0.667M (right), r0=10Mr_0 = 10M: S(ℓmax⁡)S(\ell_{\max}) is Eq. (1) when decomposing the terms “(2Re⁡SabΦ+xab)uaub(2\operatorname{Re}S^\Phi_{ab} + x_{ab})u^a u^b” into (ℓ,m)(\ell,m)-modes and summing first over ℓ:∣m∣→ℓmax⁡\ell: |m| \to\ell_{\max}, then over m:−20→20m : -20 \to20 and then adding a numerically-fitted tail for ∣m∣>20|m| > 20. The horizontal dashed lines are the reference values habRuaub=−0.216063h^{\mathrm{R}}_{ab}u^a u^b = -0.216063 (a=0a = 0) and −0.198470-0.198470 (a=0.667Ma = 0.667M). The dashed orange curve in the left plot corresponds to the calculation using the CCK residual modes (up to ℓmax⁡=68\ell_{\max} = 68 it lies under the Bondi-like curve: absolute difference ≤4.7×10−8\le4.7 \times10^{-8}).

Asymptotic quantities in Kerr. We have also validated the cancellation at non-decay orders rjr^j, j=0,1j=0,1 between the reconstructed piece 2Re⁡Sab†Φ2\operatorname{Re}S^\dagger_{ab}\Phi and the gauge piece −Lζgab-\mathcal{L}_{\zeta}g_{ab} in the full metric perturbation (1) as r→∞r\to\infty in Kerr. This is shown in Figure 6.

NP-components of the adjusted metric perturbation, shown in six panels for $h_{nn}$, $h_{nm}$, and $h_{mm}$

Figure 6. The NP-components of the adjusted metric perturbation ha^b^R(1)h^{R}_{\hat{a}\hat{b}}(1) in the asymptotic region r→∞r \to\infty, constructed from the mm-mode scheme on the Nz=21N_z = 21 grid and evaluated at the interior node z=cos⁡θ=0.3020z = \cos\theta= 0.3020 for a moderately spinning Kerr black hole (u=φ=0u = \varphi= 0). The top row again shows the cancellation between the reconstructed piece and the gauge piece, leaving only the subleading 1/r1/r decay. The second row shows the extrapolation of the 1/r1/r-pieces, which can be seen as observables for gravitational radiation. Shown are absolute values.

For example, as shown in [12 App. D], the Bondi mass aspect is given up to normalization by lim⁡r→∞rhnn\lim_{r\to\infty}rh_{nn} in outgoing Eddington coordinates, as could be inferred for a particular angle θ\theta and for the m=2m=2 mode contribution in the first panel and the second row of Figure 6. Likewise, ωlim⁡r→∞rRe⁡(hmm)\omega\lim_{r\to\infty}r\operatorname{Re}(h_{mm}) gives the “++” entries of the Bondi-news tensor, whereas ωlim⁡r→∞rIm⁡(hmm)\omega\lim_{r\to\infty}r\operatorname{Im}(h_{mm}) gives the “×\times” entries for each particular mode with dependence e−iωt+imφe^{-i\omega t+im\varphi}, ω=mΩ\omega=m\Omega. These quantities hence directly follow from the third panel in the second row of Figure 6.

The Bondi angular momentum aspect can be retrieved from hnmh_{nm} at the order 1/r21/r^2 by formulas given in [12, App. D]. Since the leading order is 1/r1/r, as follows from the second panel in the second row of Figure 6, another step is necessary to dig out the this subleading piece. It is shown in Figure 7. That plot suggests also the absence of any terms of the form (log⁡r)/r2(\log r)/r^2 in the asymptotic expansion.18

Figure 7. Subleading 1/r21/r^2 piece of hnmh_{nm}, as required for the Bondi angular momentum aspect.

Remarks on (ℓ,m)(\ell,m)-mode scheme in Kerr

For moderately inclined and eccentric orbits an (ℓ,m)(\ell,m)-mode treatment remains attractive, since every step of our scheme other than the Teukolsky solver, and the GHZ transport equations for the corrector [26] stays algebraic. Furthermore, the GHZ transport equations can be solved by rr-integration per (ℓ,m)(\ell,m)-mode [28 App. H], which is no substantial difference to solving them per angle θ\theta in the mm-mode scheme, and thus would be expected to be of a comparable computational cost. We summarize here what changes in the remaining steps of our scheme relative to the Schwarzschild case of Sec. IV.

A generic bound geodesic has three fundamental frequencies Ω=(Ωφ,Ωr,Ωθ)\Omega= (\Omega_\varphi, \Omega_r, \Omega_\theta) as we recall in App. § 2.0.3 § 3.1.

Spin-weighted quantities sXsX, such as the Weyl scalar ψ\psi, are correspondingly expanded in terms of their harmonics, ω=k⋅Ω\omega= \boldsymbol{k}\cdot\boldsymbol{\Omega}, k=(kφ,kr,kθ)∈Z3\boldsymbol{k} = (k_\varphi, k_r, k_\theta) \in\mathbb{Z}^3 and in spin-weighted spheroidal eigenfunctions as

sX=∑ℓksXωℓm(r) sSωℓm(θ)e−iωu+imφ∗,(52){}^sX = \sum_{\ell k} {}^sX_{\omega\ell m}(r)\,{}^sS_{\omega\ell m}(\theta)e^{-i\omega u+im\varphi_*}, \tag*{(52)}

in place of (17), where m=kφm = k_\varphi, and ω=k⋅Ω\omega= \boldsymbol{k}\cdot\boldsymbol{\Omega}. For ψ\psi, the (ℓ,m)(\ell,m) mode amplitudes +2ψωℓm{}_{+2}\psi_{\omega\ell m} are in fact the quantities returned by most production Teukolsky frequency domain codes and the asymptotic amplitude ψωℓm5∘\psi^{5\circ}_{\omega\ell m} is the leading 1/r51/r^5 piece of this quantity (which can be viewed as an asymptotic quantity at I+\mathcal{I}^+ if we want).

The associated modal HMS fωℓm∘f^\circ_{\omega\ell m} is produced algebraically as in Schwarzschild by (19) in the spheroidal basis, where DωℓmD_{\omega\ell m} is now the Teukolsky-Starobinsky constant for Kerr, see e.g., [52 Lem. 2.7]:

Dℓmω=116[λ2(λ+2)2+40aωλ2(m−aω)+48aωλ(m+aω)+144(aω)2(m−aω)2]+9M2ω2,(53)D_{\ell m\omega}=\frac{1}{16}\left[\lambda^2(\lambda+2)^2+40a\omega\lambda^2(m-a\omega)+48a\omega\lambda(m+a\omega)+144(a\omega)^2(m-a\omega)^2\right]+9M^2\omega^2, \tag*{(53)}

where λ=λℓm(aω)\lambda=\lambda_{\ell m}(a\omega) is the the angular eigenvalue of the spheroidal harmonics in the conventions of [52 Eqs. 2.3, 2.1]. On the other hand, Held’s angular derivatives, which are required in our scheme, act algebraically on spin-weighted spherical harmonics, see e.g., [28 App. C]. If we want to avoid giving up on the expansion in spheroidal harmonics and keep the Held-operators algebraic, then we have to use a well-known expansion

sSωℓm(θ)=∑LsbLωℓm sYLm(θ),(54){}^sS_{\omega\ell m}(\theta)=\sum_L {}^sb^{\omega\ell m}_L\,{}_sY_{Lm}(\theta), \tag*{(54)}
⟹fωLm∘=∑ℓfωℓm∘ +2bLωℓm,(55)\Longrightarrow f^\circ_{\omega Lm}=\sum_\ell f^\circ_{\omega\ell m}\,{}_{+2}b^{\omega\ell m}_L, \tag*{(55)}

see, e.g., [53, 54]. The mixing coefficients sbLωℓm{}^sb^{\omega\ell m}_L are computed once per mode and cached, since every Held chain downstream reuses them. We denote the half-width at which the expansion is truncated as NmixN_{\rm mix},

sbLωℓm retained for ∣L−ℓ∣≤Nmix.(56){}^sb^{\omega\ell m}_L\ \text{retained for } |L-\ell|\leq N_{\rm mix}. \tag*{(56)}

In Kerr, the Held operators ð~\widetilde{\eth} and ð~′\widetilde{\eth}' (Table I) are not simply spin-raising/lowering operators but acquire off-diagonal pieces proportional to aωa\omega, see e.g., [28 App. C]. Furthermore, the multiplication operators τ∘\tau^\circ, τˉ∘\bar{\tau}^\circ and Ω∘\Omega^\circ—which vanish identically when a=0a=0—are themselves off-diagonal. However, all five, when considered as matrix operators, are tridiagonal in LL at fixed mm. Since these operators are linear cos⁡θ\cos\theta and sin⁡θ\sin\theta, they involve in fact only “nearest neighbor” couplings, such as

cos⁡θ sYL,m=cL+1 sYL+1,m+bL sYL,m+cL sYL−1,m,(57)\cos\theta\,{}_sY_{L,m}=c_{L+1}\,{}_sY_{L+1,m}+b_L\,{}_sY_{L,m}+c_L\,{}_sY_{L-1,m}, \tag*{(57)}

with

scLm=(L2−m2)(L2−s2)L2(4L2−1),sbLm=−smL(L+1),(58){}^sc_{Lm}=\sqrt{\frac{(L^2-m^2)(L^2-s^2)}{L^2(4L^2-1)}},\qquad{}^sb_{Lm}=-\frac{sm}{L(L+1)}, \tag*{(58)}

and similarly for sin⁡θ sYLm\sin\theta\,{}_sY_{Lm}. Hence cos⁡θ\cos\theta corresponds to a banded tri-diagonal matrix CC and sin⁡θ\sin\theta to a banded tri-diagonal matrix SS, respectively. Then Ω∘=−2iaC\Omega^\circ=-2iaC, τ∘=−ia2S\tau^\circ=-\frac{ia}{\sqrt{2}}S etc. The L=0L=0 case is degenerate and must be considered separately.

The multiplication operator ρ−1\rho^{-1} (5) needed for the completion pieces is likewise represented by the tri-diagonal matrix

RLℓ=−r 1+ia CLℓ,CLℓ=matrix of (41),(59)R_{L\ell}=-r\,\mathbf{1}+ia\,C_{L\ell},\qquad C_{L\ell}=\text{matrix of (41)}, \tag*{(59)}

The mode amplitudes of the completion piece of the Hertz potential (13) are, when considered as a vector in ℓ\ell at fixed k\boldsymbol{k},

Φadj=Φ0∘+RΦ1∘+R2Φ2∘+R3Φ3∘.(60)\boldsymbol{\Phi}^{\rm adj}=\boldsymbol{\Phi}^{0\circ}+R\boldsymbol{\Phi}^{1\circ}+R^2\boldsymbol{\Phi}^{2\circ}+R^3\boldsymbol{\Phi}^{3\circ}. \tag*{(60)}

Since each of these five angular operators is tridiagonal, a chain of pp of them is banded with half-bandwidth pp. The longest chain is the ð~′ð~′ð~′\widetilde{\eth}'\widetilde{\eth}'\widetilde{\eth}' appearing in Φ0∘\Phi^{0\circ}, and (15d) adds at most three further neighbours, so Φadj\Phi^{\rm adj} at output multipole LL requires the HMS out to ℓ≤L+6\ell\leq L+6, and the HMS in turn requires spheroidal amplitudes out to ℓ≤L+6+Nmix\ell\leq L+6+N_{\rm mix}, where NmixN_{\rm mix} is the half-width at which (39a) is truncated. The cost of the completion is then O(Lmax⁡)O(L_{\max}) per k\boldsymbol{k}, which is still negligible when compared with the radial Teukolsky solve that produce its input.

The upshot is that nothing structural in the improved reconstruction scheme is lost with an (ℓ,m)(\ell,m) scheme in going to Kerr and to generic orbits. The map from the Teukolsky amplitudes ψωℓm5∘\psi^{5\circ}_{\omega\ell m} to the completed Hertz amplitudes Φadj\Phi^{\rm adj} remains purely algebraic, mode by mode, with no further radial or angular ODEs to solve beyond those already required for ψ\psi itself. What is diagonal in (ℓ,m)(\ell,m) for a=0a=0 now is merely banded via two independent mechanisms, the spheroidal-to-spherical transformation (39a), which couples a window of half-width NmixN_{\rm mix}, and the five Held operators which are tridiagonal in ℓ\ell at fixed mm. Both truncations are numerically under control: the mixing coefficients decay rapidly in ∣L−ℓ∣|L-\ell| at fixed aωa\omega, so that a modest NmixN_{\rm mix} suffices and the fixed L+6L+6 buffer inherited from the longest Held chain ð~′ð~′ð~′\widetilde{\eth}'\widetilde{\eth}'\widetilde{\eth}' is exact rather than approximate. As an implementation, one simply solves the radial Teukolsky equation out to ℓ≤Lmax⁡+6+Nmix\ell\leq L_{\max}+6+N_{\rm mix} and monitors the convergence of Φadj\Phi^{\rm adj} under increasing NmixN_{\rm mix}.

Acknowledgements: We thank Patrick Bourg for discussions and explanations of the implementation of (17). We thank Adam Pound, Andrew Spiers, and Barry Wardell for discussions.

AI assistance declaration: During the preparation of this work, the authors used Claude’s Opus (Anthropic) to assist with numerical investigations of the Detweiler redshift quantity in Sec. V F. Specifically, Claude was prompted to apply existing code referred to in App. D to produce numerical results and to generate the corresponding Figure 5. In addition, we used Claude’s Opus for generating documentation, as well as plotting and unit testing scripts. All scientific interpretation of the results, as well as the writing of the manuscript, were carried out

solely by the authors. The authors take full responsibility for the content of this publication.

Lie derivative of gabg_{ab} along ζa\zeta^{a}

Since ζa\zeta^{a} is by construction compatible with the traceless IRG, we have Lζgablalb=0\mathcal{L}_{\zeta}g_{ab}l^{a}l^{b}=0 and Lζgabmamˉb=0\mathcal{L}_{\zeta}g_{ab}m^{a}\bar{m}^{b}=0. The remaining, non-zero, NP components are [32]

(Lζg)mm=−2ρˉð~2ζl∘+2ð~ð~f∘+2Ω∘ð~ð~′f∘+4ρˉτ∘ð~f∘+8ρ′∘f∘,(61)(\mathcal{L}_{\zeta}g)_{mm}=-2\bar{\rho}\tilde{\eth}^{2}\zeta^{\circ}_{l}+2\tilde{\eth}\tilde{\eth}f^{\circ}+2\Omega^{\circ}\tilde{\eth}\tilde{\eth}'f^{\circ}+4\bar{\rho}\tau^{\circ}\tilde{\eth}f^{\circ}+8\rho'^{\circ}f^{\circ}, \tag*{(61)}
(Lζg)nm=ρˉð~ð~2ζl∘−2ρρˉτ∘ð~2ζl∘+ρ(ρ+ρˉ)Ψ∘ð~ζl∘−ρΩˉ∘ð~2ð~f∘+2ρτ∘ð~ð~f∘+(1ρˉ−2ρˉΩ∘2)ð~′ð~′f∘+2(ρ+ρˉ)Ω∘τ∘ð~′f∘−2ρˉτ∘ð~2f∘−(ρ2Ω∘+ρ)Ψ∘ð~′f∘+ρˉΨˉ∘ð~′f∘−6ρΩ∘ρ′∘ð~f∘+4ρρ′τ∘ð~′f∘+8ρρ′∘τ∘f∘,\begin{aligned} (\mathcal{L}_{\zeta}g)_{nm}={}&\bar{\rho}\tilde{\eth}\tilde{\eth}^{2}\zeta^{\circ}_{l}-2\rho\bar{\rho}\tau^{\circ}\tilde{\eth}^{2}\zeta^{\circ}_{l}+\rho(\rho+\bar{\rho})\Psi^{\circ}\tilde{\eth}\zeta^{\circ}_{l}-\rho\bar{\Omega}^{\circ}\tilde{\eth}^{2}\tilde{\eth}f^{\circ}+2\rho\tau^{\circ}\tilde{\eth}\tilde{\eth}f^{\circ}\\ &+\left(\frac{1}{\bar{\rho}}-2\bar{\rho}\Omega^{\circ2}\right)\tilde{\eth}'\tilde{\eth}'f^{\circ}+2(\rho+\bar{\rho})\Omega^{\circ}\tau^{\circ}\tilde{\eth}'f^{\circ}-2\bar{\rho}\tau^{\circ}\tilde{\eth}^{2}f^{\circ}-(\rho^{2}\Omega^{\circ}+\rho)\Psi^{\circ}\tilde{\eth}'f^{\circ}\\ &+\bar{\rho}\bar{\Psi}^{\circ}\tilde{\eth}'f^{\circ}-6\rho\Omega^{\circ}\rho'^{\circ}\tilde{\eth}f^{\circ}+4\rho\rho'\tau^{\circ}\tilde{\eth}'f^{\circ}+8\rho\rho'^{\circ}\tau^{\circ}f^{\circ}, \end{aligned}

and

(Lζg)nn=Re⁡[4ρρˉτ∘ð~ð~2ζl∘−4ρ2ρˉτ∘2ð~2ζl∘+2ρ2Ψ∘ð~′ð~ζl∘+4ρ2Ψˉ∘τ∘ð~ζl∘−2ð~′3ð~f∘−2(1ρ+4Ω∘)ð~′2ð~′f∘−4ρρˉΩ∘τ∘ð~′2ð~f∘+4(4+ρˉΩ∘−ρρˉΩ∘2)τ∘ð~′ð~′f∘−(8ρ′∘+3ρΨ∘+3ρˉΨˉ∘+2ρ2Ω∘2Ψ∘+8ρρˉτ∘τ∘)ð~2f∘+4ρ2τ∘2ð~′ð~f∘+4ρ(ρ+2ρˉ)Ω∘τ∘2ð~′f∘+8ρ2ρˉτ∘τ∘ð~′f∘+4ρρˉΨ∘τ∘ð~′f∘−24ρρˉΩ∘ρ′∘τ∘ð~′f∘+16ρ2ρ′∘τ∘2f∘].\begin{aligned} (\mathcal{L}_{\zeta}g)_{nn}=\operatorname{Re}\Big[{}&4\rho\bar{\rho}\tau^{\circ}\tilde{\eth}\tilde{\eth}^{2}\zeta^{\circ}_{l}-4\rho^{2}\bar{\rho}\tau^{\circ2}\tilde{\eth}^{2}\zeta^{\circ}_{l}+2\rho^{2}\Psi^{\circ}\tilde{\eth}'\tilde{\eth}\zeta^{\circ}_{l}+4\rho^{2}\bar{\Psi}^{\circ}\tau^{\circ}\tilde{\eth}\zeta^{\circ}_{l}\\ &-2\tilde{\eth}'^{3}\tilde{\eth}f^{\circ}-2\left(\frac{1}{\rho}+4\Omega^{\circ}\right)\tilde{\eth}'^{2}\tilde{\eth}'f^{\circ}-4\rho\bar{\rho}\Omega^{\circ}\tau^{\circ}\tilde{\eth}'^{2}\tilde{\eth}f^{\circ}+4(4+\bar{\rho}\Omega^{\circ}-\rho\bar{\rho}\Omega^{\circ2})\tau^{\circ}\tilde{\eth}'\tilde{\eth}'f^{\circ}\\ &-\left(8\rho'^{\circ}+3\rho\Psi^{\circ}+3\bar{\rho}\bar{\Psi}^{\circ}+2\rho^{2}\Omega^{\circ2}\Psi^{\circ}+8\rho\bar{\rho}\tau^{\circ}\tau^{\circ}\right)\tilde{\eth}^{2}f^{\circ}+4\rho^{2}\tau^{\circ2}\tilde{\eth}'\tilde{\eth}f^{\circ}+4\rho(\rho+2\bar{\rho})\Omega^{\circ}\tau^{\circ2}\tilde{\eth}'f^{\circ}\\ &+8\rho^{2}\bar{\rho}\tau^{\circ}\tau^{\circ}\tilde{\eth}'f^{\circ}+4\rho\bar{\rho}\Psi^{\circ}\tau^{\circ}\tilde{\eth}'f^{\circ}-24\rho\bar{\rho}\Omega^{\circ}\rho'^{\circ}\tau^{\circ}\tilde{\eth}'f^{\circ}+16\rho^{2}\rho'^{\circ}\tau^{\circ2}f^{\circ}\Big]. \end{aligned}

The remaining components follow by conjugation, Lζgabnamˉb=Lζgabnamb‾\mathcal{L}_{\zeta}g_{ab}n^{a}\bar{m}^{b}=\overline{\mathcal{L}_{\zeta}g_{ab}n^{a}m^{b}} and Lζgabmˉamˉb=Lζgabmamb‾\mathcal{L}_{\zeta}g_{ab}\bar{m}^{a}\bar{m}^{b}=\overline{\mathcal{L}_{\zeta}g_{ab}m^{a}m^{b}}, which in mode space are

(Lζg)nmˉ,ωℓm=−(−1)m(Lζg)nm,−ωℓ−m‾,(Lζg)mˉmˉ,ωℓm=(−1)m(Lζg)mm,−ωℓ−m‾.(62)(\mathcal{L}_{\zeta}g)_{n\bar{m},\omega\ell m}=-(-1)^{m}\overline{(\mathcal{L}_{\zeta}g)_{nm,-\omega\ell-m}},\qquad (\mathcal{L}_{\zeta}g)_{\bar{m}\bar{m},\omega\ell m}=(-1)^{m}\overline{(\mathcal{L}_{\zeta}g)_{mm,-\omega\ell-m}}. \tag*{(62)}

The relative minus sign between the two is the (−1)s(-1)^{s} arising when conjugating a spin-weighted harmonic.

Teukolsky operators in Held form

The Teukolsky wave operator O\mathcal{O} for the 0-perturbed Weyl scalar, denoted ψ\psi in this paper, appears in (10), which

which we rewrite as Oψ=jT\mathcal{O}\psi=j^{\mathrm{T}}, where jT=SabTabj^{\mathrm{T}}=S^{ab}T_{ab} is Teukolsky’s source (10). Especially when working with (ℓ,m)(\ell,m)-modes, it is convenient to express these quantities in terms of (5) and Held’s coefficients and operators from Table I, because these are related to spin-raising and -lowering operators, see e.g., [28 App. C].

12Oψ=12ρρˉ(3Ψ∘ρ+8ρ′∘)ψ−12[Ψ∘ρ(3ρ+ρˉ)+2ρˉρ′∘+ρρˉ(−Ψˉ∘+6ρτ∘τˉ∘+(ρ′∘+ρˉ′∘)Ω∘)](Pψ)+Pð~′ψ+ρρˉτ∘(Pð~ψ)+ρτˉ∘(Pð~′ψ)−(4ρ+ρˉ)(Pψ~)−ρρˉ(ð~ð~ψ),\begin{aligned} \frac{1}{2}\mathcal{O}\psi={}&\frac{1}{2}\rho\bar{\rho}(3\Psi^{\circ}\rho+8\rho'^{\circ})\psi-\frac{1}{2}\left[\Psi^{\circ}\rho(3\rho+\bar{\rho})+2\bar{\rho}\rho'^{\circ}+\rho\bar{\rho}\left(-\bar{\Psi}^{\circ}+6\rho\tau^{\circ}\bar{\tau}^{\circ}+(\rho'^{\circ}+\bar{\rho}'^{\circ})\Omega^{\circ}\right)\right](\mathsf{P}\psi)\\ &+\mathsf{P}\tilde{\eth}'\psi+\rho\bar{\rho}\tau^{\circ}(\mathsf{P}\tilde{\eth}\psi)+\rho\bar{\tau}^{\circ}(\mathsf{P}\tilde{\eth}'\psi)-(4\rho+\bar{\rho})(\mathsf{P}\tilde{\psi})-\rho\bar{\rho}(\tilde{\eth}\tilde{\eth}\psi), \end{aligned}

and the source is

jT≡SabTab=−ρˉ2ð~2Tll+2ρˉð~PTlm−P2Tmm+2ρˉ2(2ρ+ρˉ)τ∘ð~Tll−2ρˉ(2ρ−ρˉ)τ∘PTlm−2ρˉ(2ρ+ρˉ)ð~Tlm+2(2ρ+ρˉ)PTmm−2ρˉ3(2ρ+ρˉ)τ∘2Tll+4ρˉ3τ∘Tlm−4ρρˉTmm.(63)\begin{aligned} j^{\mathrm{T}}\equiv S^{ab}T_{ab}={}&-\bar{\rho}^{2}\tilde{\eth}^{2}T_{ll}+2\bar{\rho}\tilde{\eth}\mathsf{P}T_{lm}-\mathsf{P}^{2}T_{mm}+2\bar{\rho}^{2}(2\rho+\bar{\rho})\tau^{\circ}\tilde{\eth}T_{ll}-2\bar{\rho}(2\rho-\bar{\rho})\tau^{\circ}\mathsf{P}T_{lm}\\ &-2\bar{\rho}(2\rho+\bar{\rho})\tilde{\eth}T_{lm}+2(2\rho+\bar{\rho})\mathsf{P}T_{mm}-2\bar{\rho}^{3}(2\rho+\bar{\rho})\tau^{\circ2}T_{ll}+4\bar{\rho}^{3}\tau^{\circ}T_{lm}-4\rho\bar{\rho}T_{mm}. \tag*{(63)} \end{aligned}

Important structural relations in the Held formalism are

[P,ð~]=0=P(τ∘,Ω∘,ρ∘,Ψ∘)[\mathsf{P},\tilde{\eth}]=0=\mathsf{P}(\tau^{\circ},\Omega^{\circ},\rho^{\circ},\Psi^{\circ})
citep‘[37,38]‘,whichcouldbe{citep}`[37, 38]`, which could be

used e.g., to rewrite (B1) in equivalent forms.

Remarks on punctures for generic orbits

What is lost, and what is not

In this appendix, we outline how one could generalize the methods by [17] used for the punctures in this work, to more general orbits. First, for a generic orbit, the comoving chart (24) conditions are untouched.

Second, the singular field—and therefore neither the residual field—is no longer exactly stationary in the comoving coordinates; i.e.,

Luha^b^P≠0⟺∂Tha^b^P≠0(64)\mathcal{L}_{u}h^{\mathrm{P}}_{\hat{a}\hat{b}} \ne0 \quad\Longleftrightarrow\quad\partial_{T}h^{\mathrm{P}}_{\hat{a}\hat{b}} \ne0 \tag*{(64)}

so that the NP tetrad components, labeled by hatted indices a^\hat{a}, retain a dependence on comoving time, where TT agrees with proper time on the worldline; T∣γ=τT|_{\gamma}=\tau.

Third, the map between the comoving coordinates (T,X,Y,Z)(T,X,Y,Z) and the background Boyer–Lindquist coordinates (t,r,θ,φ)(t,r,\theta,\varphi), in terms of which the modes of the reconstruction algorithm are defined, ceases to be linear with constant coefficients and becomes quasi-periodic.

Orbital phases for generic bound orbits

Generic geodesics satisfy the radial and polar equations,

Σ2(drdτ)2=R(r),Σ2(dθdτ)2=Θ(θ)(65)\Sigma^{2}\left(\frac{dr}{d\tau}\right)^{2}=\mathcal{R}(r), \qquad\Sigma^{2}\left(\frac{d\theta}{d\tau}\right)^{2}=\Theta(\theta) \tag*{(65)}

coupled only through the common factor Σ2=(r2+a2cos⁡2θ)2\Sigma^{2}=(r^{2}+a^{2}\cos^{2}\theta)^{2}. Mino time λ=∫dτ/Σ\lambda=\int d\tau/\Sigma decouples them into independent periodic sectors with torus frequencies Υθ,Υr\Upsilon_{\theta},\Upsilon_{r}. See e.g., [9], for a detailed review of these and other concepts of orbital motion in Kerr and for further references. The associated phases

qr=Υrλ,qθ=Υθλ(66)q_{r}=\Upsilon_{r}\lambda,\qquad q_{\theta}=\Upsilon_{\theta}\lambda \tag*{(66)}

advance uniformly in Mino time, not in proper time. The tt- and φ\varphi-geodesic equations have right-hand sides that are sums of a function of rr alone and a function of θ\theta alone, and integrate to a secular piece plus an oscillatory piece,

t0(λ)=Υtλ+Δt(q),φ0(λ)=Υφλ+Δφ(q)(67)t_{0}(\lambda)=\Upsilon_{t}\lambda+\Delta t(q),\qquad\varphi_{0}(\lambda)=\Upsilon_{\varphi}\lambda+\Delta\varphi(q) \tag*{(67)}

where q:=(qr,qθ)q:=(q_{r},q_{\theta}) and Δt\Delta t, Δφ\Delta\varphi have zero average over the torus. The frequencies conjugate to Boyer–Lindquist time, which are the ones entering the mode decomposition, are the ratios of the secular rates,

Ωα=ΥαΥt,α∈{r,θ,φ}(68)\Omega_{\alpha}=\frac{\Upsilon_{\alpha}}{\Upsilon_{t}},\qquad\alpha\in\{r,\theta,\varphi\} \tag*{(68)}

where

ω≡ωk=Ω⋅k,(69)\omega\equiv\omega_{k}=\boldsymbol{\Omega}\cdot\boldsymbol{k}, \tag*{(69)}

with k=(kφ,kr,kθ)∈Z3\boldsymbol{k}=(k_{\varphi},k_{r},k_{\theta})\in\mathbb{Z}^{3} are the harmonics of the orbital frequencies appearing in the mode-decompositions.

The local expansion on the torus

The comoving coordinates (26) are built from r0r_{0}, θ0\theta_{0} (the particle’s initial radius and latitude) now depend on the phases,

X=X(x;q),Y=Y(x;q),Z=Z(x;q),(70)X=X(x;q),\qquad Y=Y(x;q),\qquad Z=Z(x;q), \tag*{(70)}

still with the particle at X=Y=Z=0X=Y=Z=0. Here x=(φc,θ,r)x=(\varphi_{c},\theta,r), with the corotating phase now defined as

φc=φ−φ0(λ).(71)\varphi_{c}=\varphi-\varphi_{0}(\lambda). \tag*{(71)}

Unlike for circular orbits, φc\varphi_{c} is generally no longer linear in tt due to the oscillatory part of (C4) that this introduces.

The monomial structure (25) is unchanged. What changes is that the coefficients, together with (27), become functions on the orbital two-torus,

cijkpqa^b^⟶cijkpqa^b^(q),(72)c^{\hat{a}\hat{b}}_{ijkpq}\longrightarrow c^{\hat{a}\hat{b}}_{ijkpq}(q), \tag*{(72)}

and zc→zc(q)z_{c}\to z_{c}(q) etc. Each is then expanded as a Fourier series on the torus,

cijkpqa^b^(q)=∑k∈Z2cijkpq,ka^b^e−ik⋅q,k⋅q=nqr+kqθ.(73)c^{\hat{a}\hat{b}}_{ijkpq}(q)=\sum_{\boldsymbol{k}\in\mathbb{Z}^{2}}c^{\hat{a}\hat{b}}_{ijkpq,\boldsymbol{k}}e^{-i\boldsymbol{k}\cdot q},\qquad\boldsymbol{k}\cdot q=nq_{r}+kq_{\theta}. \tag*{(73)}

The master integral

For a circular equatorial orbit R2R^{2} is an even function of φc\varphi_{c}, which reduces every φc\varphi_{c} integral to the single master function (29). The evenness is due to the discrete isometry (t,φ)→(−t,−φ)(t,\varphi)\to(-t,-\varphi), and composing it with a time translation gives an isometry that maps the circular orbit to itself.

For a generic orbit this reflection maps the orbit to its time reverse; the invariance is lost and an odd term appears. The most general dependence a single azimuthal angle can generate is then

R2=a(q)−b(q)cos⁡φc−c(q)sin⁡φc.(74)R^{2}=a(q)-b(q)\cos\varphi_{c}-c(q)\sin\varphi_{c}. \tag*{(74)}

Since bcos⁡φc+csin⁡φc=βcos⁡(φc−δ)b\cos\varphi_{c}+c\sin\varphi_{c}=\beta\cos(\varphi_{c}-\delta) with β:=(b2+c2)1/2\beta:=(b^{2}+c^{2})^{1/2} and c/b=tan⁡δc/b=\tan\delta, this is again a single cosine, merely displaced: the point of closest approach on the φc\varphi_{c} circle sits at φc=δ\varphi_{c}=\delta rather than at φc=0\varphi_{c}=0. The substitution χ=φc−δ\chi=\varphi_{c}-\delta in the defining integral then costs only a phase,

Jνm(q)=e−imδ(q)Jνm(a(q),β(q)),(75)J_{\nu m}(q)=e^{-im\delta(q)}J_{\nu m}\bigl(a(q),\beta(q)\bigr), \tag*{(75)}

so that (29) continues to do all the work.

From mm-modes to frequency modes

The frequency modes are assembled in two steps. First, at fixed orbital phase, the local azimuthal transform which is the only place (C12) and the dictionary (30) enter. Second, the transform over the torus. Using (C4) and (C5),

e−imφ0eiωt=eik⋅qeiωΔt(q)e−imΔφ(q),(76)e^{-im\varphi_0}e^{i\omega t}=e^{i\mathbf{k}\cdot\mathbf{q}}e^{i\omega\Delta t(q)}e^{-im\Delta\varphi(q)}, \tag*{(76)}

with m=kφm=k_\varphi, ω=Ω⋅k\omega=\mathbf{\Omega}\cdot\mathbf{k} since ωΥt−mΥφ=krΥr+kθΥθ\omega\Upsilon_t-m\Upsilon_\varphi=k_r\Upsilon_r+k_\theta\Upsilon_\theta. Averaging over tt and changing variables to the Mino phases gives

h~ab;kP(r,θ)=1(2π)2∫02π∫02πh~ab;mP(q;r,θ)J(q)eiωΔt(q)−imΔφ(q)ei(krqr+kθqθ) dqr dqθ,J:=1Υtdtdλ.(77)\tilde{h}^{\mathrm{P}}_{ab;\mathbf{k}}(r,\theta)=\frac{1}{(2\pi)^2}\int_0^{2\pi}\int_0^{2\pi}\tilde{h}^{\mathrm{P}}_{ab;m}(q;r,\theta)\mathcal{J}(q)e^{i\omega\Delta t(q)-im\Delta\varphi(q)}e^{i(k_rq_r+k_\theta q_\theta)}\,dq_r\,dq_\theta,\qquad\mathcal{J}:=\frac{1}{\Upsilon_t}\frac{dt}{d\lambda}. \tag*{(77)}

Each factor has a definite role. The phase e−imΔφe^{-im\Delta\varphi} is related to (C4), reflecting the fact that the azimuth against φ0\varphi_0 itself oscillates; eiωΔte^{i\omega\Delta t} corrects the mismatch between the orbital clock and Boyer–Lindquist time; ei(krqr+kθqθ)e^{i(k_rq_r+k_\theta q_\theta)} performs the harmonic extraction; and J\mathcal{J} is the Jacobian of the change from the tt-average that defines the Fourier coefficient to the uniform average over the Mino phases.

In the circular limit Δt=Δφ=0\Delta t=\Delta\varphi=0, J=1\mathcal{J}=1, and h~ab;mP\tilde{h}^{\mathrm{P}}_{ab;m} is independent of qq; the integral collapses to δkr,0δkθ,0\delta_{k_r,0}\delta_{k_\theta,0} and the single helical frequency ω=mΩφ\omega=m\Omega_\varphi is recovered. The generic-orbit algorithm is therefore the circular one of Sec. V A, evaluated on a grid in (qr,qθ)(q_r,q_\theta) and followed by (C14).

Reference map to numerical code

For the reader interested in using our open source code, we have written a comprehensive README file which indicates which header files, classes, and functions in the code are associated with generating the main quantities in each section, as well as a general description for its use.

References

References

  1. [1]S. E. Gralla and R. M. Wald, Class. Quant. Grav. 25, 205009 (2008), [Erratum: Class.Quant.Grav. 28, 159501 (2011)], arXiv:0806.3293 [gr-qc].arxiv.org/abs/0806.3293
  2. [2]P. Hintz, Gluing small black holes along timelike geodesics III: construction of true solutions and extreme mass ratio mergers (2024), arXiv:2408.06715 [gr-qc].arxiv.org/abs/2408.06715
  3. [3]P. Amaro-Seoane, S. Aoudia, S. Babak, P. Binetruy, E. Berti, et al., GW Notes 6, 4 (2013), arXiv:1201.3621 [astro-ph.CO].
  4. [4]S. Babak, J. Gair, A. Sesana, E. Barausse, C. F. Sopuerta, C. P. L. Berry, E. Berti, P. Amaro-Seoane, A. Petiteau, and A. Klein, Phys. Rev. D 95, 103012 (2017), arXiv:1703.09722 [gr-qc].
  5. [5]C. O. Lousto and Y. Zlochower, Phys. Rev. Lett. 106, 041101 (2011), arXiv:1009.0292 [gr-qc].
  6. [6]M. L. Katz, A. J. K. Chua, L. Speri, N. Warburton, and S. A. Hughes, Phys. Rev. D 104, 064047 (2021), arXiv:2104.04582 [gr-qc].
  7. [7]A. J. K. Chua, M. L. Katz, N. Warburton, and S. A. Hughes, Phys. Rev. Lett. 126, 051102 (2021), arXiv:2008.06071 [gr-qc].
  8. [8]L. M. Barack and A. Pound, Rept. Prog. Phys. 82, 016904 (2019), arXiv:1805.10385 [gr-qc].
  9. [9]A. Pound and B. Wardell, Black hole perturbation theory and gravitational self-force (2021), arXiv:2101.04592 [gr-qc].DOI
  10. [10]T. Hinderer and E. E. Flanagan, Phys. Rev. D 78, 064028 (2008), arXiv:0805.3337 [gr-qc].
  11. [11]B. Wardell, A. Pound, N. Warburton, J. Miller, L. Durkan, and A. Le Tiec, Phys. Rev. Lett. 130, 241402 (2023), arXiv:2112.12265 [gr-qc].
  12. [12]S. Hollands and A. Toomani, Class. Quant. Grav. 43, 055001 (2026), arXiv:2405.18604 [gr-qc].
  13. [13]A. Pound, C. Merlin, and L. Barack, Phys. Rev. D 89, 024009 (2014), arXiv:1310.1513 [gr-qc].
  14. [14]A. Heffernan, A. Ottewill, and B. Wardell, Phys. Rev. D 89, 024030 (2014), arXiv:1211.6446 [gr-qc].
  15. [15]A. Heffernan, A. Ottewill, and B. Wardell, Phys. Rev. D 86, 104023 (2012), arXiv:1004.0794 [gr-qc].
  16. [16]P. Bourg, A. Pound, S. D. Upton, and R. Panosso Macedo, Phys. Rev. D 110, 084007 (2024), arXiv:2404.10082 [gr-qc].
  17. [17]B. Leather et al., Kerr metric perturbations for second-order self-force theory (2026), arXiv:2611.03888 [gr-qc].arxiv.org/abs/2611.03888
  18. [18]J. M. Cohen and L. S. Kegeles, Phys. Rev. D 10, 1070 (1974).
  19. [19]P. L. Chrzanowski, Phys. Rev. D 11, 2042 (1975).
  20. [20]S. R. Dolan, L. Durkan, C. Kavanagh, and B. Wardell, Class. Quant. Grav. 41, 155011 (2024), arXiv:2306.16459 [gr-qc].
  21. [21]S. R. Dolan, N. Warburton, A. J. Harte, A. Le Tiec, B. Wardell, and L. Barack, Phys. Rev. D 89, 064011 (2014), arXiv:1312.0775 [gr-qc].
  22. [22]D. Li and N. Yunes, Metric Reconstruction for Generic Black-Hole Perturbations (2026), arXiv:2605.11080 [gr-qc].arxiv.org/abs/2605.11080
  23. [23]S. A. Teukolsky, Astrophys. J. 185, 635 (1973).
  24. [24]A. Ori, Phys. Rev. D 67, 124010 (2003), arXiv:gr-qc/0207045.
  25. [25]J. M. Cohen and R. M. Wald, J. Math. Phys. 13, 543 (1972).
  26. [26]S. R. Green, S. Hollands, and P. Zimmerman, Class. Quant. Grav. 37, 075001 (2020), arXiv:1908.09095 [gr-qc].DOI
  27. [27]C. Merlin, A. Ori, L. Barack, A. Pound, and M. van de Meent, Phys. Rev. D 94, 104066 (2016), arXiv:1609.01227 [gr-qc].DOI
  28. [28]V. Toomani, P. Zimmerman, A. Spiers, S. Hollands, A. Pound, and S. R. Green, Class. Quant. Grav. 39, 015019 (2022), arXiv:2108.04273 [gr-qc].DOI
  29. [29]P. Bourg, B. Leather, M. Casals, A. Pound, and B. Wardell, Phys. Rev. D 110, 044007 (2024), arXiv:2403.132634 [gr-qc].
  30. [30]B. Leather, A. Spiers, A. Pound, S. D. Upton, B. Wardell, L. Durkan, and N. Warburton, Second-order Teukolsky calculations for nons pinning, quasicircular binaries (2026), arXiv:2609.08995 [gr-qc].arxiv.org/abs/2609.08995
  31. [31]A. Spiers, A. Pound, and J. Moxon, The Bondi–Sachs gauge, BMS frames, and memory in black hole perturbation theory (2026), arXiv:2606.24816 [gr-qc].arxiv.org/abs/2606.24816
  32. [32]L. R. Price, K. Shankar, and B. F. Whiting, Class. Quant. Grav. 24, 2367 (2007), arXiv:gr-qc/0611070 [gr-qc].DOI
  33. [33]M. Casals, S. Hollands, A. Pound, and V. Toomani, Class. Quant. Grav. 41, 215010 (2024), arXiv:2402.15468 [gr-qc].DOI
  34. [34]B. Cownden, R. Panosso Macedo, C. Pantelidou, S. D. Upton, and B. Wardell, Multi-domain spectral method for Kerr spacetimes: a hyperboloidal Teukolsky m-mode solver for self-force computations (2026), arXiv:2611.03870 [gr-qc].arxiv.org/abs/2611.03870
  35. [35]S. Chandrasekhar, The Mathematical Theory of Black Holes (Clarendon Press, Oxford, 1983).
  36. [36]R. P. Geroch, A. Held, and R. Penrose, J. Math. Phys. 14, 874 (1973).
  37. [37]A. Held, Commun. Math. Phys. 37, 311 (1974).
  38. [38]A. Held, Commun. Math. Phys. 44, 211 (1975).
  39. [39]É. É. Flanagan and D. A. Nichols, Phys. Rev. D 95, 044002 (2017), [Erratum: Phys.Rev.D 108, 069902 (2023)], arXiv:1510.03386 [hep-th].DOI
  40. [40]R. H. Price, Phys. Rev. D 5, 2439 (1972).
  41. [41]S. A. Teukolsky and W. H. Press, Astrophys. J. 193, 443 (1974).
  42. [42]A. A. Starobinsky and S. M. Churilov, Zh. Eksp. Teor. Fiz. 65, 3 (1973), english translation: Sov. Phys. JETP 38, 1–5 (1973).
  43. [43]P. Zimmerman, unpublished notes.
  44. [44]Wolfram Research, Inc., Mathematica, version 14.2 (2025), champaign, IL.
  45. [45]D. Yllanes and J. M. Martín-García, xCoba: General component tensor computer algebra, https://www.xact.es/xCoba/, part of the xAct suite.
  46. [46]R. Panosso Macedo, P. Bourg, A. Pound, and S. D. Upton, Phys. Rev. D 110, 084008 (2024), arXiv:2404.10083 [gr-qc].DOI
  47. [47]B. Wardell, N. Warburton, L. Durkan, K. Cunningham, B. Leather, Z. Nasipak, T. Torres, et al., Teukolsky: A Mathematica package for computing solutions to the Teukolsky equation (2025), part of the Black Hole Perturbation Toolkit. This work makes use of the Black Hole Perturbation Toolkit.
  48. [48]R. K. L. Lo, Phys. Rev. D 110, 124070 (2024), arXiv:2306.16469 [gr-qc].DOI
  49. [49]Y. Yin, R. K. L. Lo, and X. Chen, Phys. Rev. D 113, 124007 (2026), arXiv:2511.08673 [gr-qc].DOI
  50. [50]S. L. Detweiler, Phys. Rev. D 77, 124026 (2008), arXiv:0804.3529 [gr-qc].DOI
  51. [51]M. van de Meent and A. G. Shah, Phys. Rev. D 92, 064025 (2015), arXiv:1506.04755 [gr-qc].DOI
  52. [52]M. Casals and R. Teixeira da Costa, Classical and Quantum Gravity 38, 165016 (2021), arXiv:2102.06734 [gr-qc].DOI
  53. [53]E. Berti, V. Cardoso, and M. Casals, Phys. Rev. D 73, 024013 (2006), erratum: Phys. Rev. D 73, 109902 (2006), arXiv:gr-qc/0511111 [gr-qc].arxiv.org/abs/gr-qc/0511111
  54. [54]C. Kavanagh, A. C. Ottewill, and B. Wardell, Physical Review D 93, 124038 (2016).

Paper details

vlnc:W_df9n6b7s
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 9

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Claude Opus (multiple versions)

View statement
Looking for related papers…
Contents