betaFeedback

WorksMathematics

Quasipositive and almost positive sectional curvature on finite quotients of Wallach spaces

Abstract

We construct nonnegatively curved metrics on the cyclic and full permutation quotients of the Wallach flag manifolds in dimensions 66, 1212, and 2424. The metrics are quasipositively curved in all three dimensions and almost positively curved in dimensions 1212 and 2424. The cyclic quotients are orientable with fundamental group C3C_3, and their further full permutation quotients have fundamental group S3S_3; none admits any metric of everywhere positive sectional curvature. For the almost-positive metrics we describe every zero-curvature plane and prove that the zero-point loci have Hausdorff dimensions exactly 1111 and 2323, respectively. A one-step deformation has, in each dimension, an explicit zero locus with nonempty interior. Further nested deformations reduce it to a measure-zero set while leaving a common codimension-one stratum. The argument combines normal forms for horizontal commuting planes with quaternionic rank conditions and a dimension estimate for commuting compressions of skew-symmetric operators. We also determine the possible degrees of arbitrary free finite quotients of the three flag covers and derive order bounds for fundamental groups when the Euler characteristic is nonzero. We have used ChatGPT-6-astra for mathematical exploration and verified and rewritten all the results.

Introduction

A metric has quasipositive sectional curvature if its sectional curvature is nonnegative everywhere and all two-planes at one point have strictly positive curvature. It has almost positive sectional curvature if its sectional curvature is nonnegative everywhere and all two-planes at every point of an open dense subset have strictly positive curvature. Throughout this paper the strict inequalities concern all planes at a common base point. For a nonnegatively curved metric gg on a closed manifold MM, write

Z(g)={x∈M: some σ∈Gr⁡2(TxM) satisfies sec⁡g(σ)=0}.(1)Z(g)=\{x\in M:\text{ some }\sigma\in\operatorname{Gr}_{2}(T_xM)\text{ satisfies }\operatorname{sec}_{g}(\sigma)=0\}. \tag*{(1)}

This is the zero-point locus, as distinguished from the zero-plane locus in Gr⁡2(TM)\operatorname{Gr}_{2}(TM). It is closed. Almost positivity is equivalent to its having empty interior. In the examples constructed below it has, more strongly, codimension one in Hausdorff dimension and zero Riemannian volume.

Acknowledgement: the authors thank Xi’an Jiaotong-Liverpool University for providing financial and academic support. We also thank Professor Wolfgang Ziller and Professor Martin Kerin for helpful discussions.

Background and the role of finite quotients

The difference between these curvature conditions is geometric and topological. A homogeneous metric that is quasipositively curved is positively curved everywhere, because isometries carry a positive point to every point. A homogeneous manifold, however, may carry an inhomogeneous metric with quasipositive or almost positive curvature even when its topology excludes positive curvature. Finite quotients are particularly useful in making this distinction explicit.

The classical construction of Gromoll and Meyer gave an exotic seven-sphere with nonnegative sectional curvature and a point of positive sectional curvature [13]. Petersen and Wilhelm subsequently constructed almost-positive metrics on the unit tangent bundle of S4S^{4} and a six-dimensional quotient [22]. Almost positivity on the Gromoll–Meyer sphere was established by Wilhelm [27]; Eschenburg and Kerin later gave a simpler construction and proof [11]. These examples demonstrated that the set of flat planes could be reduced substantially without preserving homogeneity.

Wilking’s work [28] introduced a broad normal-biquotient construction of almost-positive metrics. His families include projectivized tangent bundles over real, complex, and quaternionic projective spaces and certain lens-space bundles. Some of the real projective tangent bundles are odd-dimensional and nonorientable, so Synge’s theorem excludes positive sectional curvature on their underlying manifolds. Thus almost positivity was already known to be strictly more flexible than positive curvature at the level of smooth manifolds. Tapp reformulated these constructions in the language of homogeneous bundles, gave effective quasipositivity conditions, and related the relevant obstruction to the fatness of a bundle [24]. Kerr and Tapp extended this approach through positive triples and obtained additional homogeneous bundles and finite cyclic quotients of T1S6T^1S^6 [17].

Later developments sharpened the analysis of flat planes in several directions. Kerin constructed almost-positive metrics on nontrivial S7S^7-bundles over S4S^4 and CP3\mathbb{CP}^3 [16]. DeVito and Nance proved almost positivity on the irreducible rank-two symmetric space G2/U(2)≅Gr⁡2(R7)G_2/U(2) \cong\operatorname{Gr}_2(\mathbb{R}^7) [9]. DeVito and Johnson’s analysis of Eschenburg spaces distinguishes the curvature properties of different natural inducing metrics and illustrates why quasipositivity of an analytic quotient metric does not imply almost positivity [8]. More recently, DeVito and West constructed infinitely many almost-positive generalized Eschenburg spaces in each dimension 4n−14n-1, n≥3n \ge3; for n≥6n \ge6, infinitely many are not homotopy equivalent to homogeneous spaces [10]. The last result is cited as a preprint. The present paper addresses a different feature: almost positivity on even-dimensional finite quotients whose fundamental groups rule out every positively curved metric.

Our manifolds come from the classical Wallach spaces. For d=2,4,8d=2,4,8, respectively, let F=C,H,O\mathbb{F}=\mathbb{C},\mathbb{H},\mathbb{O} and use the following subgroup chains:

ddGdG_dKdK_dLdL_d
2SU(3)\mathrm{SU}(3)T2T^2S(U(2)×U(1))S(\mathrm{U}(2)\times\mathrm{U}(1))
4Sp(3)\mathrm{Sp}(3)Sp(1)3\mathrm{Sp}(1)^3Sp(2)×Sp(1)\mathrm{Sp}(2)\times\mathrm{Sp}(1)
8F4F_4Spin(8)\mathrm{Spin}(8)Spin(9)\mathrm{Spin}(9)

Table 1.2.

Put Wd=Gd/KdW_d=G_d/K_d. The homogeneous fibration

Sd=Ld/Kd⟶Wd⟶Gd/Ld=FP2(2)S^d=L_d/K_d \longrightarrow W_d \longrightarrow G_d/L_d=\mathbb{F}P^2 \tag*{(2)}

has total dimension 3d3d. Wallach proved that these total spaces admit homogeneous metrics with positive sectional curvature [26]. They are also regular leaves of Cartan’s three-principal-curvature isoparametric families. Their cyclic quotients occur as Gauss images in the work of Ma and Ohnita [20 Section 5]. In particular, the smooth manifolds studied here, and normal homogeneous metrics of nonnegative curvature on them, predate the present constructions. Their occurrence in isoparametric geometry does not identify their spherical induced metrics with the positive Wallach metrics.

The normalizer of KdK_d has component group S3S_3, acting by permutation of an ordered projective frame. Define

Xd=Gd/(Kd⋊C3),Yd=Gd/(Kd⋊S3).(3)X_d=G_d/(K_d\rtimes C_3), \qquad Y_d=G_d/(K_d\rtimes S_3). \tag*{(3)}

The action is on the right. The cyclic action preserves orientation, whereas a transposition reverses orientation. Thus XdX_d is orientable with fundamental group C3C_3, and YdY_d is nonorientable with fundamental group S3S_3. Synge’s theorem [23] excludes positive sectional curvature on both. In particular, no positively curved Wallach metric is invariant under the cyclic action. A metric suitable for descent must be constructed separately.

Main results

Fix an Ad⁡(Gd)\operatorname{Ad}(G_d)-invariant inner product QQ on gd\mathfrak{g}_d. We use Q(X,Y)=−12Re⁡tr⁡(XY)Q(X,Y)=-\frac{1}{2}\operatorname{Re}\operatorname{tr}(XY) for the matrix groups and the negative Killing form for F4F_4. All group metrics below are extended by right translations. This convention makes the whole disconnected subgroup in (1.4) act isometrically.

Theorem A. For each d∈{2,4,8}d\in\{2,4,8\}, both XdX_d and YdY_d admit explicit quasipositively curved metrics. For d=4d=4 and d=8d=8, they admit explicit almost-positively curved metrics. None of these six manifolds admits a metric with everywhere positive sectional curvature. Moreover,

π1(Xd)=C3,π1(Yd)=S3,H∗(Xd;Q)≅H∗(S3d;Q),H∗(Yd;Q)≅H∗(pt;Q).\pi_1(X_d)=C_3,\qquad\pi_1(Y_d)=S_3,\qquad H^*(X_d;\mathbb{Q})\cong H^*(S^{3d};\mathbb{Q}),\qquad H^*(Y_d;\mathbb{Q})\cong H^*(\mathrm{pt};\mathbb{Q}).

The map Xd→YdX_d\to Y_d is the orientation double cover.

The metrics have simple inverse metric operators. For the initial one-step deformation let PLP_L be orthogonal projection to IdI_d, and put

Φt−1=I+(t−1−1)PL,0<t<1.(4)\Phi_t^{-1}=I+(t^{-1}-1)P_L,\qquad0<t<1. \tag*{(4)}

It induces a metric gtg_t on every finite quotient under consideration. For the stronger quaternionic construction use

Sp⁡(3)⊃L1=Sp⁡(2)Sp⁡(1)⊃L2=Sp⁡(1)3⊃L3=ΔSp⁡(1),ΦH−1=I+s1P1+s2P2+s3P3,(5)\operatorname{Sp}(3)\supset L_1=\operatorname{Sp}(2)\operatorname{Sp}(1)\supset L_2=\operatorname{Sp}(1)^3\supset L_3=\Delta\operatorname{Sp}(1),\qquad\Phi_{\mathrm{H}}^{-1}=I+s_1P_1+s_2P_2+s_3P_3, \tag*{(5)}

where s1,s2,s3>0s_1,s_2,s_3>0. For the exceptional construction use the coordinate chain

F4⊃Spin⁡(9)⊃Spin⁡(8)⊃⋯⊃Spin⁡(3),ΦO−1=I+∑j=39sjPj,sj>0.(6)F_4\supset\operatorname{Spin}(9)\supset\operatorname{Spin}(8)\supset\cdots\supset\operatorname{Spin}(3),\qquad\Phi_{\mathrm{O}}^{-1}=I+\sum_{j=3}^{9}s_jP_j,\qquad s_j>0. \tag*{(6)}

The embeddings in (1.7) are specified in § 6. In each case the metric at the group identity is Q(Φ(⋅,⋅))Q(\Phi(\cdot,\cdot)).

To describe the flat regions uniformly, let r1,r2,r3r_1,r_2,r_3 be the diagonal coordinates of the projective frame relative to a fixed point. For F=C,H\mathbb{F}=\mathbb{C},\mathbb{H} these are ri(aKd)=∣a3i∣2r_i(aK_d)=\lvert a_{3i}\rvert^2. In the exceptional case, with EiE_i the coordinate idempotents of the Albert algebra, they are ri(aKd)=⟨E3,aEi⟩r_i(aK_d)=\langle E_3,aE_i\rangle. In all cases ri≥0r_i\geq0, ∑ri=1\sum r_i=1, and

Ψ=∑i=13ri2(7)\Psi=\sum_{i=1}^{3}r_i^2 \tag*{(7)}

is well defined on both finite quotients.

Theorem B. For every d∈{2,4,8}d\in\{2,4,8\}, the one-step metric satisfies

Z(gt)={Ψ≤12}.(8)\mathcal{Z}(g_t)=\{\Psi\leq\tfrac{1}{2}\}. \tag*{(8)}

This set has nonempty interior. The metrics defined by (1.6) and (1.7), denoted gHg_{\mathbb{H}} and gOg_{\mathbb{O}}, satisfy

{Ψ=12}⊂Z(gF)⊂{Ψ≤12},dim⁡HZ(gF)=3d−1,Vol⁡gFZ(gF)=0,(9)\{\Psi=\tfrac{1}{2}\}\subset\mathcal{Z}(g_F)\subset\{\Psi\leq\tfrac{1}{2}\},\qquad\dim_{\mathbb{H}}\mathcal{Z}(g_F)=3d-1,\qquad\operatorname{Vol}_{g_F}\mathcal{Z}(g_F)=0, \tag*{(9)}

for (F,d)=(H,4),(O,8)(F,d)=(\mathbb{H},4),(\mathbb{O},8). Their zero-point loci and normal horizontal flat-plane data are independent of the positive strengths sjs_j. A complete parametrization in the quaternionic case is given in Theorem 5.1 and Proposition 5.6; the exceptional case is described in Proposition 7.3. The inequalities in (1.10) are not meant to replace those complete descriptions. In particular, the zero locus need not be just the level set Ψ=1/2\Psi=1/2. The almost-positive metrics are different from the one-step quasipositive metrics: the additional deformations remove an open region of flat points, but a codimension-one stratum necessarily survives within these constructions.

The topology also gives sharp restrictions that do not assume any symmetry of the metric or the action.

Theorem C. If a finite group Γ\Gamma acts freely and smoothly on WdW_d, where d=2,4,8d=2,4,8, then

∣Γ∣∈{1,2,3,6}.\lvert\Gamma\rvert\in\{1,2,3,6\}.

If the quotient is orientable, then ∣Γ∣∈{1,3}\lvert\Gamma\rvert\in\{1,3\}. The maximal orders 3 and 6 are attained by the orientable and nonorientable examples in Theorem A. A nontrivial further finite free quotient of XdX_d has degree two and is nonorientable.

For general quasipositively curved closed nn-manifolds, the fundamental group is finite by the Cheeger–Gromoll splitting theorem [6]. Combining this with Gromov’s Betti-number bound [14] gives

∣π1(M)∣∣χ(M)∣≤Bn,\lvert\pi_1(M)\rvert\lvert\chi(M)\rvert\leq B_n,

where BnB_n depends only on nn. § 9 derives the precise consequences, including bounds in dimension four and for six-dimensional biquotient universal covers. These statements do not claim a dimension-only group-order bound when the Euler characteristic vanishes.

Proof strategy and scope

The common construction is a quotient of a product of compact groups with bi-invariant metrics. The submersion formula gives nonnegative curvature. Tapp’s flat-plane theorem [25] then makes the flatness test exact: a quotient plane is flat precisely when its normal horizontal lift commutes in the group and after every projection occurring in the nested deformation. This criterion, established in the form needed here in Section 2, is used throughout.

The main algebraic step is to classify all normal horizontal commuting two-planes. In the complex, quaternionic, and exceptional cases, they form a single isotropy orbit of a Fourier-conjugate two-torus. This reduces the first deformation to a row or torus-isotropy calculation, yielding (1.9). In dimension twelve the two further bracket conditions become a rank condition on three imaginary quaternionic axes. In dimension twenty-four the successive spin-group projections become commuting compressions of two skew-symmetric operators of ranks two and six. Their admissible flags have dimension at most 29. After subtracting stabilizers and accounting for base-point parameters, this gives the sharp bound 23 for the exceptional zero locus. The rank-drop branches are included in both arguments.

There is a genuine difference in dimension six. The complex diagonal algebra is abelian, and the additional mechanism used over H has no complex analogue. Theorem 8.1 proves that every finite nested connected-subgroup deformation of a bi-invariant metric on SU(3), followed by the indicated right quotient, has an open set of flat points. Proposition 8.2 also shows that a nonnegatively curved conformal change of any normal-biquotient metric retains every old zero plane. Neither statement rules out arbitrary almost-positive metrics on X2X_2 or Y2Y_2.

The constructions strengthen the known curvature on the Gauss-image quotients, not their classification as smooth manifolds. The previous literature supplies the Wallach spaces, their isoparametric interpretation, the submersion machinery, and the topological obstructions. The contributions proved here are the equivariant curvature constructions, the complete normal-form and zero-locus analyses, and the dimension estimates that establish almost positivity on the finite quotients.

Preliminaries: submersions, nested deformations, and dimension

References

  1. [1]J. C. Baez, The octonions, Bull. Amer. Math. Soc. (N.S.) 39 (2002), 145–205; erratum, 42 (2005), 213. 10.1090/S0273-0979-01-00934-X.
  2. [2]L. Bérard-Bergerÿ, Certaines fibrations d’espaces homogènes riemanniens, Compositio Math. 30 (1975), 43–61.
  3. [3]A. L. Besse, Einstein Manifolds, Ergebnisse der Mathematik und ihrer Grenzgebiete (3), vol. 10, Springer-Verlag, Berlin, 1987. 10.1007/978-3-540-74311-8.DOI
  4. [4]J. Bochnak, M. Coste, and M.-F. Roy, Real Algebraic Geometry, Ergebnisse der Mathematik und ihrer Grenzgebiete (3), vol. 36, Springer-Verlag, Berlin, 1998. 10.1007/978-3-662-03718-8.
  5. [5]J. Cheeger, Some examples of manifolds of nonnegative curvature, J. Differential Geom. 8 (1973), 623–628. 10.4310/jdg/1214431964.
  6. [6]J. Cheeger and D. Gromoll, The splitting theorem for manifolds of nonnegative Ricci curvature, J. Differential Geom. 6 (1971), 119–128. 10.4310/jdg/1214430220.
  7. [7]J. DeVito, The classification of compact simply connected biquotients in dimension 6 and 7, Math. Ann. 368 (2017), 1493–1541. 10.1007/s00208-016-1460-8.
  8. [8]J. DeVito and P. Johnson, Curvature on Eschenburg spaces, Transform. Groups 31 (2026), 465–492. arXiv:2306.15510.arxiv.org/abs/2306.15510
  9. [9]J. DeVito and E. Nance, Almost positive curvature on an irreducible compact rank 2 symmetric space, Int. Math. Res. Not. IMRN 2020, no. 5, 1346–1365. 10.1093/imrn/rny049.
  10. [10]J. DeVito and J. West, Almost positively curved generalized Eschenburg spaces, preprint (2025), arXiv:2511.17751.arxiv.org/abs/2511.17751
  11. [11]J.-H. Eschenburg and M. Kerin, Almost positive curvature on the Gromoll–Meyer sphere, Proc. Amer. Math. Soc. 136 (2008), 3263–3270. 10.1090/S0002-9939-08-09429-X.
  12. [12]A. Grigor’yan, Analytic and geometric background of recurrence and non-explosion of the Brownian motion on Riemannian manifolds, Bull. Amer. Math. Soc. (N.S.) 36 (1999), 135–249. 10.1090/S0273-0979-99-00776-4.
  13. [13]D. Gromoll and W. Meyer, An exotic sphere with nonnegative sectional curvature, Ann. of Math. (2) 100 (1974), 401–406. 10.2307/1971078.
  14. [14]M. Gromov, Curvature, diameter and Betti numbers, Comment. Math. Helv. 56 (1981), 179–195. 10.1007/BF02566208.DOI
  15. [15]A. Hatcher, Algebraic Topology, Cambridge University Press, Cambridge, 2002.
  16. [16]M. Kerin, Some new examples with almost positive curvature, Geom. Topol. 15 (2011), 217–260. 10.2140/gt.2011.15.217.
  17. [17]M. Kerin, M. Kerr and K. Tapp, A note on quasi-positive curvature conditions, Differential Geom. Appl. 34 (2014), 63–79. 10.1016/j.difgeo.2014.03.009.
  18. [18]A. W. Knapp, Lie Groups Beyond an Introduction, second ed., Progress in Mathematics, vol. 140, Birkhäuser, Boston, 2002.
  19. [19]A. Kollross, Octonions, triality, the exceptional Lie algebra F₄, and polar actions on the Cayley hyperbolic plane, Int. J. Math. 31 (2020), no. 7, 2050051, 28 pp. 10.1142/S0129167X20500512.
  20. [20]H. Ma and Y. Ohnita, On Lagrangian submanifolds in complex hyperquadrics and isoparametric hypersurfaces in spheres, Math. Z. 261 (2009), 749–785. 10.1007/s00209-008-0350-5.
  21. [21]B. O’Neill, The fundamental equations of a submersion, Michigan Math. J. 13 (1966), 459–469. 10.1307/mmj/1028999604.DOI
  22. [22]P. Petersen and F. Wilhelm, Examples of Riemannian manifolds with positive curvature almost everywhere, Geom. Topol. 3 (1999), 331–367. 10.2140/gt.1999.3.331.
  23. [23]J. L. Synge, On the connectivity of spaces of positive curvature, Quart. J. Math. Oxford Ser. 7 (1936), 316–320. 10.1093/qmath/os-7.1.316.DOI
  24. [24]K. Tapp, Quasi-positive curvature on homogeneous bundles, J. Differential Geom. 65 (2003), 273–287. 10.4310/jdg/1090511688.DOI
  25. [25]K. Tapp, Flats in Riemannian submersions from Lie groups, Asian J. Math. 13 (2009), 459–464. 10.4310/AJM.2009.v13.n4.a2.arxiv.org/abs/math/0703389
  26. [26]N. R. Wallach, Compact homogeneous Riemannian manifolds with strictly positive curvature, Ann. of Math. (2) 96 (1972), 277–295. 10.2307/1970789.DOI
  27. [27]F. Wilhelm, An exotic sphere with positive curvature almost everywhere, J. Geom. Anal. 11 (2001), 519–560.DOI
  28. [28]B. Wilhelm, Manifolds with positive sectional curvature almost everywhere, Invent. Math. 148 (2002), 117–141. 10.1007/s002220100190.

Paper details

vlnc:W_dpwjp7aa
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

ChatGPT-6-astra

View statement
Looking for related papers…
Contents