betaFeedback

WorksPhysics and Astronomy

N=4{\cal N}=4 supersymmetric Yang-Mills thermodynamics to order λ5/2λ^{5/2}

Abstract

We calculate the resummed perturbative free energy of N=4{\cal N} = 4 supersymmetric Yang-Mills in four spacetime dimensions (SYM44_{44}) to order λ5/2λ^{5/2} in the 't Hooft coupling at finite temperature and zero chemical potential. All infrared divergences cancel when we include contributions from SYM44_{44} ring diagrams and the final result is both ultraviolet and infrared finite. Our result has special significance since order λ5/2λ^{5/2} is the highest order calculation that can be done with perturbation theory, because there are nonperturbative effects associated with the magnetic mass scale that come into play at order λ3λ^3. We compare results obtained with regularization by dimensional reduction (RDR), which preserves supersymmetry, and canonical dimensional regularization (DR). We also compare with a generalized Padé approximant constructed by matching the weak coupling result at order λ2λ^2 and the large NcN_c strong coupling result at order λ−3/2λ^{-3/2}. Finally we make a comparison between our result and the QCD free energy and show that SYM44_{44} has better convergence properties.

Introduction

The N=4\mathcal{N}=4 supersymmetric theory in four spacetime dimensions (SYM44_{44}) is the most famous example of a conformal field theory (CFT) in four dimensions. At finite temperature and in the weak coupling limit the theory has many similarities with quantum chromodynamics (QCD), but because of its high degree of symmetry it is also simpler to work with in some ways. For example, SYM44_{44} is ultraviolet finite at all orders in perturbation theory (the beta function is zero and the coupling constant does not run and is independent of the temperature). An important difference with QCD is that in the strong coupling limit the free energy can be calculated using the anti-de Sitter space (AdS)/CFT correspondence. For these reasons SYM44_{44} is often used as a model for hot QCD.

In the strong coupling limit the ratio of the free energy to the ideal gas result is [1]

FFideal=34[1+158ζ(3)λ−3/2+O(λ−3)](1)\frac{\mathcal{F}}{\mathcal{F}_{\mathrm{ideal}}}=\frac{3}{4}\left[1+\frac{15}{8}\zeta(3)\lambda^{-3/2}+O\left(\lambda^{-3}\right)\right] \tag*{(1)}

where λ\lambda is the ’t Hooft coupling. In the weak coupling limit the leading order contribution to the free energy is the ideal gas result and the perturbative corrections have the form

FFideal=1+a2λ+a3λ3/2+(a4+a4′log⁡(λ))λ2+a5λ5/2+O(λ3).(2)\frac{\mathcal{F}}{\mathcal{F}_{\mathrm{ideal}}}=1+a_{2}\lambda+a_{3}\lambda^{3/2}+\left(a_{4}+a_{4}^{\prime}\log(\lambda)\right)\lambda^{2}+a_{5}\lambda^{5/2}+O\left(\lambda^{3}\right). \tag*{(2)}

The subscripts on the coefficients in (2) correspond to the square of the associated power of λ\lambda. There is no λ5/2log⁡(λ)\lambda^{5/2}\log(\lambda) contribution and the reason is discussed in section 3. The coefficients {a2,a3,a4,a4′}\{a_{2},a_{3},a_{4},a_{4}^{\prime}\} are known [2, 3, 4, 5, 6, 7, 8, 9]. In this paper we present our calculation of the coefficient a5a_{5}.

The weak and strong coupling results should accurately give the free energy in their respective domains, but the radii of convergence of the two series is unclear and it is therefore difficult to know to what extent one or the other should be trusted at intermediate coupling. Various methods can be used to interpolate between the strong and weak coupling regimes, but again it is difficult to know how accurate these expressions are. One approach is to use a generalized Padé approximant constructed so that the coefficients can be uniquely determined with information from the perturbative result to order λ2\lambda^{2} and the strong coupling result in (1). In section 3 we show that this function does not very accurately represent the weak coupling result to order λ5/2\lambda^{5/2}.

The coefficient a2a_2 in (2) can be computed in a straightforward way. Calculations at higher orders require a reorganization of perturbation theory. The method we use is called static resummation. It is a simplified version of the Braaten-Pisarski resummation that can only be used to calculate static quantities. The key is that static Green’s functions can be calculated directly in imaginary time and do not need to be analytically continued back to real time, which means that we can use Euclidean propagators with discrete energies when analyzing infrared divergences.

Before explaining further how the static resummation works we define the theory and our notation. All fields belong to the adjoint representation of the SU⁡(Nc)\operatorname{SU}(N_c) gauge group. The gauge field is defined as in QCD. It can be expanded as Aμ=AμataA_\mu= A_\mu^a t^a with colour generators tat^a that satisfy

[ta,tb]=ifabctcandTr⁡(tatb)=12δab(3)[t^a,t^b] = i f_{abc}t^c \quad\text{and} \quad\operatorname{Tr}(t^a t^b) = \frac{1}{2}\delta^{ab} \tag*{(3)}

where the indices {a,b,c,…}∈(1,Nc2−1)\{a,b,c,\ldots\} \in(1,N_c^2-1) and the structure constants fabcf_{abc} are real and antisymmetric. We use the standard notation Nc=CAN_c = C_A and dA=δaa=Nc2−1d_A = \delta_{aa} = N_c^2-1. The covariant derivative is defined Dμ=∂μ−ig[Aμ, ⋅ ]D_\mu= \partial_\mu- ig[A_\mu,\,\cdot\,] and the field strength tensor is Fμν=∂μAν−∂νAμ−ig[Aμ,Aν]F_{\mu\nu} = \partial_\mu A_\nu- \partial_\nu A_\mu- ig[A_\mu,A_\nu]. The ’t Hooft coupling in eqs. (1.1, 1.2) is related to the coupling gg as λ=CAg2\lambda= C_Ag^2. In the rest of this paper, except for the last section where we present our results, we use gg instead of λ\lambda. The reason is that for technical reasons the fractional exponents are more difficult to deal with in our calculation. The fermionic fields are four-component Majorana fermions. There are six real scalar fields written in a multiplet as ΦA\Phi_A with A∈(1,6)A \in(1,6). Three components are scalar and three are pseudoscalar so we can write ΦA=(Xp,Yq)\Phi_A = (X_p,Y_q) with {p,q}∈(1,3)\{p,q\} \in(1,3) where XpX_p and YqY_q represent scalar and pseudoscalar fields, respectively. These fields can be expanded as ΦA=ΦAata\Phi_A = \Phi_A^a t^a, Xp=XpataX_p = X_p^a t^a and Yq=YqataY_q = Y_q^a t^a. The Lagrange density is:

\mathcal{L} = \operatorname{Tr}\left[ -\frac{1}{2}F_{\mu\nu}F^{\mu\nu} + (D_\mu\Phi_A)(D^\mu\Phi_A) + i\bar{\psi}_i\slashed{D}\psi_i -\frac{1}{2}g^2(i[\Phi_A,\Phi_B])^2 -ig\bar{\psi}_i\left[\alpha^p_{ij}X_p+i\beta^q_{ij}\gamma_5Y_q,\psi_j\right] \right]+\mathcal{L}_{\mathrm{gf}}+\mathcal{L}_{\mathrm{gh}} \tag*{(4)}

where the six 4×44 \times4 matrices αp\alpha^p and βq\beta^q satisfy

{αp,αq}=−2δpqand{βp,βq}=−2δpqand[αp,βq]=0.(5)\{\alpha^p,\alpha^q\}=-2\delta^{pq} \quad\text{and} \quad\{\beta^p,\beta^q\}=-2\delta^{pq} \quad\text{and} \quad[\alpha^p,\beta^q]=0. \tag*{(5)}

We work in covariant gauge with the Feynman choice for the gauge parameter. We calculate the integrands for all diagrams in Minkowski space and then rotate to Euclidean space to define the finite temperature sum-integrals. For technical reasons this is more convenient for us than starting with Euclidean space Feynman rules. The Minkowski space Feynman rules are given in appendix § 0.2.1.

The static resummation was introduced in [10] and first used to calculate the free energy of pure gauge QCD at order g4g^4 in [11]. It has since been used to obtain the free energy of full QCD at order g4g^4 in [12], QCD at order g5g^5 in [13], and SYM44_{44} at order g4g^4 in [8]. The main idea behind static resummation is that it provides a simple way to organize a perturbative calculation of integrals that depend on two scales. The temperature, TT, is the hard scale. The hard thermal loop (HTL) longitudinal gluon mass, mm, and scalar mass, MM, are both of order gTgT and provide the soft scale. Momentum integrals are calculated by separating the hard and soft momentum regions. A propagator is hard if some components of its momentum are hard, and soft if all components are soft. A boson Matsubara frequency has the form 2nπT2n\pi T where nn is integer and therefore a boson propagator is soft only if the frequency is zero. Fermion propagators have frequencies (2n+1)πT(2n+1)\pi T and are always hard because their frequencies cannot be zero. This means that the structure of the resummation should be determined by the behaviour of the boson propagators in the Euclidean infrared limit (p0=0p_0=0, p≪Tp\ll T) where their masses cannot be treated as perturbative corrections. We give the results for the HTL masses mm and MM in appendix § 0.10. The Lagrange density is modified, in frequency space, as

L=(L+Tr⁡[m2A0aA0aδp0−M2ΦAΦAδp0])−Tr⁡[m2A0aA0aδp0−M2ΦAΦAδp0](6)\mathcal{L}=\left(\mathcal{L}+\operatorname{Tr}\left[m^2 A_0^a A_0^a\delta_{p_0}-M^2\Phi^A\Phi^A\delta_{p_0}\right]\right)-\operatorname{Tr}\left[m^2 A_0^a A_0^a\delta_{p_0}-M^2\Phi^A\Phi^A\delta_{p_0}\right] \tag*{(6)}

where the notation δp0\delta_{p_0} indicates a Kronecker delta that will set the corresponding Matsubara mode to zero in Euclidean space. The two terms in the round bracket are absorbed into the unperturbed Lagrangian and the last two terms are treated as perturbations and give counterterm vertices for gluons and scalars of the form

gluons:−iδabgμ0gν0m2δp0scalars:iδabδABM2δp0.(7)\begin{aligned} \text{gluons:}\quad&-i\delta^{ab}g^{\mu0}g^{\nu0}m^2\delta_{p_0}\\ \text{scalars:}\quad&i\delta^{ab}\delta_{AB}M^2\delta_{p_0}. \tag*{(7)} \end{aligned}

The modified unperturbed Lagrangian gives resummed propagators (in Feynman gauge)

gluon:Δμνab=−iδab[gμνP2+(1P2−m2−1P2)δp0gμ0gν0]scalar:ΔABab=iδabδAB[1P2+(1P2−M2−1P2)δp0].(8)\begin{aligned} \text{gluon:}\quad&\Delta_{\mu\nu}^{ab}=-i\delta^{ab}\left[\frac{g_{\mu\nu}}{P^2}+\left(\frac{1}{P^2-m^2}-\frac{1}{P^2}\right)\delta_{p_0}g^{\mu0}g^{\nu0}\right]\\ \text{scalar:}\quad&\Delta_{AB}^{ab}=i\delta^{ab}\delta_{AB}\left[\frac{1}{P^2}+\left(\frac{1}{P^2-M^2}-\frac{1}{P^2}\right)\delta_{p_0}\right]. \tag*{(8)} \end{aligned}

The fermion and ghost propagators and the nine non-counterterm vertices of the theory are given in appendix A.

References

  1. [1]S. S. Gubser, I. R. Klebanov and A. A. Tseytlin, Nucl. Phys. B 534, 202 (1998).
  2. [2]A. Fotopoulos and T. R. Taylor, Phys. Rev. D 59, 061701 (1999).
  3. [3]C. J. Kim and S. J. Rey, Nucl. Phys. B 564, 430 (2000).
  4. [4]M. A. Vazquez-Mozo, Phys. Rev. D 60, 106010 (1999).
  5. [5]A. Nieto and M. H. G. Tytgat, [arXiv:hep-th/9906147 [hep-th]].DOI
  6. [6]J. P. Blaizot, E. Iancu and A. Rebhan, Phys. Rev. D 63, 065003 (2001).
  7. [7]Q. Du, M. Strickland, U. Tantary and B. W. Zhang, JHEP 09, 038 (2020).
  8. [8]Q. Du, M. Strickland and U. Tantary, JHEP 08, 064 (2021) [erratum: JHEP 02, 053 (2022)].
  9. [9]J. O. Andersen, Q. Du, M. Strickland and U. Tantary, Phys. Rev. D 105, 015006 (2022).
  10. [10]P. B. Arnold and O. Espinosa, Phys. Rev. D 47, 3546 (1993) [erratum: Phys. Rev. D 50, 6662 (1994)].
  11. [11]P. B. Arnold and C. X. Zhai, Phys. Rev. D 50, 7603 (1994).
  12. [12]P. B. Arnold and C. X. Zhai, Phys. Rev. D 51, 1906 (1995).
  13. [13]C. X. Zhai and B. M. Kastening, Phys. Rev. D 52, 7232 (1995).
  14. [14]W. Siegel, Phys. Lett. B 84, 193 (1979).
  15. [15]D. M. Capper, D. R. T. Jones and P. van Nieuwenhuizen, Nucl. Phys. B 167, 479 (1980).
  16. [16]L. Dolan and R. Jackiw, Phys. Rev. D 20, 3320 (1974).
  17. [17]Kapusta, J., & Gale, C. (2006). Finite Temperature Field Theory: Principles and Applications. In Cambridge University Press.
  18. [18]C. D. Palmer and M. E. Carrington, Can. J. Phys. 80, 847 (2002).
  19. [19]R. R. Parwani and C. Coriano, [arXiv:hep-ph/9409339 [hep-ph]].
  20. [20]E. Braaten and A. Nieto, Phys. Rev. D 51, 6990 (1995).

Paper details

vlnc:W_dqjh2n3w
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents