betaFeedback

WorksEconomics, Econometrics and Finance

Cross-product Modelling in Continuous Intraday Electricity Markets via Hawkes Processes

Abstract

As renewable energy integration accelerates, intraday continuous (IDC) electricity markets have become essential for short-term balancing. However, the simultaneous trading of overlapping contracts with varying granularities creates complex, hidden liquidity dependencies that are critical to market stability but remain poorly understood. This paper proposes a multivariate State-Dependent Hawkes Process (SDHP) to model cross-product liquidity dynamics between Quarter-Hourly and Hourly IDC contracts. To determine how cross-product effects vary under different market conditions, we classify the trading sessions into two distinct regimes: 'Normal' and 'Stressed', based on a composite metric of the bid-ask spread, mid-price volatility and queue imbalance. The model is calibrated on the first month of each quarter of 2024 using level 3 limit order book (LOB) data from the Dutch EPEX SPOT IDC market. We find that order flow is overwhelmingly self-driven, with roughly 95% of orders arriving in reaction to earlier orders in both regimes. Cross-excitation runs mainly from the Quarter-Hourly to the Hourly contract, but this leadership weakens under stress: the ratio of cumulative cross-excitation falls from 2.8 to 1.5, so the two contracts influence each other almost equally. Stress also makes the Quarter-Hourly to Hourly channel much faster, cutting its mean lag from 6.05 to 0.93 seconds. The strong seasonal variation found in calm periods largely disappears under stress, where all four months converge to the same structure.

Introduction

With rising shares of wind and solar generation, the intraday continuous (IDC) market has become the main venue for correcting imbalances between the day-ahead auction and real-time balancing [1]. Participants use it to adjust positions after the day-ahead result is known, typically in response to updated wind and solar PV power forecasts [2], plant outages or revised demand [3]. Unlike the day-ahead auction, which clears all orders at a single price, IDC markets match orders one by one as they arrive. A trade occurs whenever a buy and a sell order meet, so a single delivery period generates a sequence of prices rather than one, which exchanges summarise through volume-weighted indices such as EPEX’s IDFull, ID3 and ID1 [4], [5], [6], [7].

At European level, continuous intraday trading is coordinated through the Single Intraday Coupling (SIDC) project, implemented on the M7 Cross-Border Intraday (XBID) platform [8], [9]. XBID connects the Nominated Electricity Market Operators through a central Shared Order Book (SOB), where market participants across Europe are able to trade electricity continuously, subject to available transmission and interconnection capacity. Contracts are classified as global, and therefore eligible for cross-border matching in the SOB, or local, and matched only on the domestic platform within their respective zone. Matching in the SOB is constrained by available cross-zonal transmission capacity, which is tracked by the Capacity Management Module (CMM). The SIDC system has grown quickly: quarterly executed trades rose from 3.50 million in Q3 2018 to 73.26 million in Q2 2025 [10].

EPEX SPOT, one of the largest European electricity exchanges, lists contracts of several granularities for intraday continuous trading: Hourly, Half-hourly and Quarter-hourly individual contracts going 24/7 all year round [11]. Trading takes place through a limit order book (LOB), which makes the market structurally similar to an electronic financial market, though with important differences arising from the physical delivery [12].

Liquidity determines how cheap trading can be. In a liquid book a participant can correct an imbalance quickly at a price close to the prevailing mid; in an illiquid one the same correction moves the price against them or cannot be executed at all. Liquidity in power markets has therefore been studied through the traded volume, bid-ask spread, market depth and resiliency [13]. Empirical work on the German market shows that bid-ask spreads widen with risk and narrow with trading activity and competition close to delivery [14]. Liquidity is also uneven across granularities: Quarter-hourly products are consistently thinner than Hourly products, which is why much of the forecasting and execution literature restricts attention to the Hourly contracts.

The observation that contract dynamics change as delivery approaches is not specific to electricity. Samuelson [15] argued that the volatility of a futures contract rises as it nears maturity, because information about the terminal value arrives faster and matters more. In electricity this mechanism is present as well. Weather forecasts sharpen as delivery approaches, imbalances become known, and participants must close their positions before gate closure [16]. Empirical studies confirm the pattern in IDC power markets: volatility, trade frequency and order book activity all increase towards gate closure [17], [18]. The intensity of orders can therefore not be treated as constant through a session.

Point processes provide a natural way to model the intensity of orders, because they describe events in continuous time rather than on a fixed grid. Hawkes process, introduced to model earthquake aftershocks [19], is the standard choice when events cluster. Its defining feature is self-excitation: each event excites further events for a period afterwards, with the increase decaying over time. The framework has been extended in several directions. Multivariate specifications treat several event types jointly and estimate the full matrix of self- and cross-excitation [20], [21]. Marked Hawkes processes attach a variable to each event, such as a trade size or a jump magnitude, allowing the strength of excitation to depend on it [22]. Regime-switching and Markov-modulated specifications let the parameters vary with a latent state, capturing alternation between quiet and bursty periods [23]. State-dependent Hawkes processes (SDHP) instead couple the process to an observable state, so that excitation depends on the current condition of the market and the state itself evolves with the events [24].

In financial markets these models have been applied extensively to LOBs [25]. They have been used to estimate transaction-level volatility and to explain volatility clustering [20], to model the joint arrival of market orders, limit orders and cancellations [26], to specify multitype marked Hawkes processes nonparametrically with state-dependent baselines driven by order book imbalance [27], and to quantify how much activity is generated endogenously by the market itself rather than by external factors [28], [29]. That last strand is directly relevant here: branching-ratio estimates close to one imply that most observed activity is a reaction to previous activity, a property associated with long memory in order flow and with fragility, since shocks are damped only weakly [30]. A parallel literature models the order book through its queues rather than its event intensities, with state-dependent arrival rates that respond to the configuration of the book [31], [32].

Applications to electricity markets are more recent but growing. Hawkes models have been used to describe market order arrivals in the German IDC market, where self-excitation is found to be strong but short-lived and the estimated parameters vary systematically across delivery hours [33]. They have been combined with transient price impact models to derive optimal execution strategies for participants trading large volumes, reproducing the intraday activity profile and the Samuelson effect [34]. They have also been extended with exogenous covariates, showing that trading activity responds not only to its own past but to vRES forecast errors and to activated balancing volumes [35]. Related point-process work models the transaction arrival process directly [36], and Hawkes specifications have also been used to detect manipulative order flow [37]. Alongside this, a separate literature studies intraday liquidity and order book structure without point processes, through spreads, depth and execution cost [14], [38], [39].

The same contract can be traded in a liquid book with tight spreads for much of its session and in a thin, volatile book shortly afterwards, and conditions differ across delivery hours and seasons. If the way order flow propagates depends on these changing conditions, then a model with constant parameters estimates an average across regimes that may describe neither. This is a problem for cross-product analysis in particular. Whether activity in the quarter-hourly book drives the hourly book, or the reverse, is a statement about the structure of transmission, and there is no reason to expect that structure to be the same when the book is deep and when it is nearly empty. A constant-parameter model cannot answer this question, because it imposes the same structure across different conditions. Allowing the baseline intensity and the excitation kernel in Hawkes models to depend on an observable measure of liquidity stress separates the two cases: exogenous order arrivals and the market’s reaction to its own past are then estimated within each regime, and the difference between regimes becomes the object of study rather than an assumption. That conditioning on liquidity stress matters has already been shown for this market. In earlier work on Dutch intraday hourly products, regimes defined by a liquidity stress index built from the bid-ask spread, order book volume and mid-price volatility fitted the order flow considerably better than a single-regime benchmark, and order flow was found to be strongly self-exciting and near-critical [40].

In the financial literature, the predominant methodology for measuring liquidity spillovers relies on the generalized vector autoregressive (VAR) framework and variance decomposition introduced by Diebold and Yilmaz [41]. This macroeconometric approach has been widely adapted to quantify directional spillovers across various domains, such as assessing global risk in foreign exchange markets [42] and analyzing the simultaneous dry-up of liquidity between ETFs and their underlying constituent stocks [43]. However, these variance decomposition methods operate on temporally aggregated, lower-frequency data, making them inadequate for modeling event-based data. Multivariate Hawkes processes have emerged as an alternative by capturing the mutually exciting nature of market shocks [44], [45]. Yet, these existing point-process applications in this context still fall short of capturing continuous market microstructure dynamics; they either integrate Hawkes intensities with aggregated DCC-GARCH frameworks for macro-level contagion [45], or they restrict the event space to extreme, threshold-triggered illiquidity drops rather than modeling the continuous arrival of high-frequency events [44].

Three research gaps follow. First, cross-product spillovers in IDC electricity markets are largely understudied. Most empirical work studies a single granularity, usually the hourly contract. How much activity in one transmits to the other, in which direction, and how quickly, is not established.

Second, the effect of liquidity conditions on excitation across products is not understood. The endogeneity literature reports branching ratios close to one in financial markets, and [40] studies how stress reshapes excitation within a contract, how endogenous electricity markets are but it is unknown whether stress changes how much activity spills between different contracts, or in which direction.

Third, kernel choice is usually asserted rather than tested, so the number of timescales in the market’s memory is imposed and not empirically established.

The SDHP model, the LSI-based regimes, the regime-dependent baseline and excitation, and the spectral-radius penalty follow [40]. This paper makes the following contributions.

  • Kernel comparison: We replace the single-exponential kernel of [40] with three exponential-mixture kernels and a power-law kernel, and select the best performing one for economic interpretation.

  • Estimation at scale: We extend the analytical gradients of [40] to both kernel families, which makes it feasible to estimate the model separately for the first month of each quarter, covering 2,915 delivery contracts.

  • Cross-product spillovers: We measure spillovers between Hourly and Quarter-Hourly contracts with a spillover

multiplier, and show how liquidity conditions affect their strength, direction and timescales.

The remainder of this paper is organised as follows. Section II describes the European power market and the mechanics of the IDC market, and presents empirical evidence on order clustering. Section III sets out the SDHP model, the kernel specifications and the estimation method. Section IV reports the kernel comparison, the selected specification and the empirical results. Section V concludes and discusses limitations.

European Intraday Continuous Power Markets

In the IDC market, market participants can trade several products until shortly before delivery. In 2024, trading for intrazonal contracts remained open until 5 minutes before delivery, while XBID contracts closed 1 hour before delivery. For both intrazonal and XBID markets, several granularities exist: hourly, half-hourly, and quarter-hourly. All these contracts open for trading at 14:00 CET on the day before delivery and can be traded simultaneously. Given the multitude of concurrent contracts available per delivery period, not all of them attract sufficient liquidity to support healthy trading dynamics. Figure 1 shows the total traded volume per contract type over time in the Netherlands. It reveals the rapid adoption and growing popularity of XBID products, particularly the hourly XBID contract. In fact, in the Netherlands in 2024, the hourly XBID was the most heavily traded contract in terms of the total number of trades, submitted orders, and trading volume, followed by the quarter-hourly XBID products. This suggests that market participants remain dependent on the classical hourly market structure while increasingly utilizing quarter-hourly contracts for finer balancing. This dynamic motivates our choice to study the relationship between these two specific products, which constituted 86% of the total traded volume in the Netherlands in 2024.

Figure 1. Annual traded volume across products. Left: Year-by-year evolution of traded volume for XBID and Intrazone product families (GWh) in the Netherlands. Right: Year-by-year evolution of traded volume for each individual product.

Clustering of Orders

Point processes are a class of stochastic processes where one realization is defined by a single point in time. The simplest example of a point process is the Poisson point process, in which events occur randomly and independently from each other over time at a constant rate. In a Poisson process, the occurrence of one event has no influence on the likelihood of future events, meaning the process has no memory and does not generate clustering beyond what would arise by chance. In contrast, a Hawkes process is a self-exciting point process in which past events increase the probability of future events occurring shortly afterward. This generates temporal clustering and dependence, as each event can trigger subsequent events, leading to bursts of activity followed by periods of calm. Figure 2 shows this phenomenon for IDC electricity markets. Rather than being evenly dispersed over time, order arrivals tend to occur in bursts, with periods of intense activity followed by relatively quiet intervals. The color scale represents the density of order arrivals. The figure reveals that high-density regions are concentrated in the minutes immediately preceding delivery, indicating an intensification of trading activity as maturity approaches. This pattern is consistent with the Samuelson effect, which states that volatility and trading intensity tend to increase as a contract approaches its delivery time. This temporal clustering is inconsistent with the independence assumption of the Poisson process but is naturally explained by a self-exciting mechanism in which the arrival of an order increases the likelihood of subsequent orders.

Figure 2. Scatter and density plots of order interarrival times against time-to-gate for an XBID hourly contract (2024-01-16 15:00-16:00) and its four constituent XBID quarter-hourly contracts (2024-01-16 15:00-15:15, 15:15-15:30, 15:30-15:45, 15:45-16:00).

Model and Training

This section provides the full SDHP model. We start by briefly introducing the data and the training setup. We then define the model mathematically. Next, we present the likelihood, its gradients, the stability of the model and the spillover.

Data and Training Setup

We estimate SDHP models following [24] and extending their framework in two key directions. First, we allow the baseline intensities to be state-dependent, enabling the model to capture changes in autonomous order flow across different market regimes. Second, we replace the single exponential decay with a multi-exponential kernel to simultaneously capture the disparate timescales of fast algorithmic reactions and slower, macro-level trading flow.

For our empirical application, we define a single trading session as the order flow of one specific Hourly XBID contract alongside its four corresponding Quarter-Hourly (Q) constituent contracts spanning the same delivery hour. We focus on the final five hours of trading for every chosen session. However, because XBID contracts close exactly one hour prior to their specific delivery start time, the Gate Closure Times (GCT) of the Hourly and Quarter-Hourly contracts are staggered. To ensure the multivariate Hawkes process is calibrated strictly on synchronous LOB dynamics, we truncate the data to the overlapping active window (illustrated as the grey period in Figure 3), during which all five contracts are simultaneously open for trading. This truncation is a methodological necessity: including non-overlapping periods where certain contracts are closed would introduce artificial intervals of zero activity. The model would falsely interpret these structural market closures as a genuine lack of liquidity or cross-product interaction, severely biasing the estimation of both the baseline intensities and the cross-excitation kernels. Therefore, we treat each of these precisely defined, fully synchronous sessions as an independent realization.

Temporal alignment of Hourly and Quarter-Hourly contracts

Figure 3. Temporal alignment of Hourly and Quarter-Hourly contracts. The figure illustrates a single delivery hour (12:00–13:00) alongside its four nested quarter-hour products. The Hourly contract and the first Quarter-Hourly contract (Q1, 12:00–12:15) both close at 11:00. However, Q2 (12:15–12:30) closes at 11:15, Q3 (12:30–12:45) at 11:30, and Q4 (12:45–13:00) at 11:45. Therefore, between 11:00 and 11:45, some contracts are closed while others remain actively traded. Non-overlapping periods (in orange color) are removed to ensure that the Hawkes process is calibrated on purely synchronous LOB dynamics.

We fit each delivery contract independently. Our calibration uses contracts from the first month of each quarter of 2024 (January, April, July, and October), which spans seasonal variation in the Dutch IDC market.

The State-dependent Hawkes Process

To quantify the dynamics between the Hourly (H) and Quarter-Hourly (Q) LOBs under varying market conditions, we model the arrival of limit orders as a multivariate SDHP.

Event Types and States

We define a 2-dimensional event space (D=2D = 2):

E={H,Q}.\mathcal{E} = \{H, Q\}.

Here, HH and QQ denote the submission of an order in the hourly and quarter-hourly contracts, respectively. Simultaneously, we define the state process S(t)S(t) using a composite Liquidity Stress Indicator (LSI) constructed from three key microstructural features: the bid–ask spread, mid-price short-term volatility, and queue imbalance.

The mid-price volatility captures short-term price uncertainty and is defined as the rolling standard deviation of the mid-price over the past 10 minutes:

σmid(t)=1Nt∑i:ti∈(t−10 min, t](Pmid(ti)−P‾mid(t))2(1)\sigma_{\mathrm{mid}}(t) = \sqrt{\frac{1}{N_t}\sum_{i:t_i\in(t-10\ \mathrm{min},\,t]} \left(P_{\mathrm{mid}}(t_i)-\overline{P}_{\mathrm{mid}}(t)\right)^2} \tag*{(1)}

where P‾mid(t)\overline{P}_{\mathrm{mid}}(t) denotes the average mid-price over the same 10-minute window and NtN_t is the number of observations in that interval.

Since our objective is to quantify the degree of liquidity imbalance irrespective of its direction, we use the absolute queue imbalance, which measures the magnitude of the liquidity asymmetry between the bid and ask sides,

QIabs(t)=∣∑i∈B(t)qi(t)−∑i∈A(t)qi(t)∑i∈B(t)qi(t)+∑i∈A(t)qi(t)∣(2)QI_{\mathrm{abs}}(t)=\left|\frac{\sum_{i\in B(t)}q_i(t)-\sum_{i\in A(t)}q_i(t)}{\sum_{i\in B(t)}q_i(t)+\sum_{i\in A(t)}q_i(t)}\right| \tag*{(2)}

with B(t)B(t) and A(t)A(t) denoting the sets of active bid and ask orders in the LOB at time tt, respectively, and qi(t)q_i(t) the volume associated with order ii.

The LSI is then defined as

LSI⁡(t)=13zspreadslow(t)+13zvolatilityslow(t)+13zQIabsslow(t).(3)\operatorname{LSI}(t)=\frac{1}{3}z_{\mathrm{spread}}^{\mathrm{slow}}(t)+\frac{1}{3}z_{\mathrm{volatility}}^{\mathrm{slow}}(t)+\frac{1}{3}z_{QI_{\mathrm{abs}}}^{\mathrm{slow}}(t). \tag*{(3)}

where z⋅slow(t)z_{\cdot}^{\mathrm{slow}}(t) denotes the slow-baseline Z-score of the corresponding feature.

The slow-baseline ZZ-score is constructed using exponentially weighted estimators for the mean and variance:

μtslow=(1−λ)μt−1slow+λXt,(4)\mu_t^{slow} = (1-\lambda)\mu_{t-1}^{slow}+\lambda X_t, \tag*{(4)}
σt2,slow=(1−λ)σt−12,slow+λ(Xt−μtslow)2,(5)\sigma_t^{2,slow} = (1-\lambda)\sigma_{t-1}^{2,slow}+\lambda\left(X_t-\mu_t^{slow}\right)^2, \tag*{(5)}
ztslow=Xt−μtslowσtslow,(6)z_t^{slow} = \frac{X_t-\mu_t^{slow}}{\sigma_t^{slow}}, \tag*{(6)}

where XtX_t denotes the feature value and λ\lambda controls the adaptation speed. We set λ=0.01\lambda= 0.01, corresponding to an effective memory of approximately 100 observations. This slow adaptation helps ensure that persistent liquidity stress remains detectable, rather than being rapidly absorbed into the baseline level, which would otherwise mask sustained regime changes.

The state process is then defined using the empirical distribution of the LSI. Let q0.75q_{0.75} denote the 75th percentile of LSI(t)\mathrm{LSI}(t) computed over the full sample. The market state is defined as

S(t)={0,LSI(t)<q0.75,(Normal regime)1,LSI(t)≥q0.75,(Stressed regime).(7)S(t)= \begin{cases} 0, & \mathrm{LSI}(t)<q_{0.75},\quad\text{(Normal regime)}\\ 1, & \mathrm{LSI}(t)\ge q_{0.75},\quad\text{(Stressed regime)}. \end{cases} \tag*{(7)}

The choice of the 75th percentile as the threshold is motivated by two key methodological considerations. First, calibrating a SDHP requires a statistically significant number of events in both regimes to robustly estimate the state-specific baseline intensities and cross-excitation kernels; selecting a higher threshold (e.g., the 95th percentile) would result in data sparsity and noisy parameter estimates for the stressed state. Second, this threshold ensures that the ”Stressed” regime represents a genuine, recurring structural state of the market, rather than simply capturing isolated microstructural anomalies or extreme outliers. Finally, this definition ensures that the stressed state corresponds to periods of persistently high volatility and wide bid–ask spreads, while the queue imbalance provides complementary information about the asymmetry of available liquidity between the bid and ask sides of the order book.

Figure 4 shows the distribution of the LSI by delivery hour for the first month of each quarter (January, April, July and October 2024). The inter-quartile boxes are centered and essentially flat across all 24 hours, with no hour displacing its body upward or downward; only the heavy two-sided tails vary mildly. The intraday seasonality has therefore already been absorbed by the normalization and does not survive into the LSI, so a threshold defined on the pooled distribution does not covertly encode time of day.

Figure 4. Liquidity Stress Score (LSI) by delivery hour for the first month of each quarter (January, April, July, and October 2024), one panel per month. Each box gives the interquartile range and median of the LSI for contracts of the corresponding delivery hour; whiskers mark the 5th and 95th percentiles. Within each month the boxes are flat and centered across all hours, and the four panels are nearly identical, showing that the slow-zz normalization absorbs intraday seasonality and that the LSI distribution is consistent across delivery hours and across the training sample.

To confirm that a single fixed threshold transports across sessions, we compare the global 75th percentile against its per-session counterparts and assess its out-of-sample calibration; results are summarized in Table I. The per-session thresholds cluster tightly around the global value, and the small median pairwise Wasserstein distance between session distributions indicates that sessions are similar though not identical. We also conducted a leave-one-session-out calibration: for each session we apply the threshold estimated on all remaining sessions and record the realized fraction of stressed events. This fraction is centered on the 25% target and stays within [0.18, 0.32] across every session. No session collapses to a single regime—even the calmest retains 18% stressed events—so the state variable exercises both regimes in every session and the state-dependent kernels remain identifiable throughout.

QuantityValue
Global threshold q0.75globq_{0.75}^{\mathrm{glob}}0.264
Per-session q0.75q_{0.75}: mean0.275
Per-session q0.75q_{0.75}: std0.049 (8.6% σLSI\sigma_{\mathrm{LSI}})
Per-session q0.75q_{0.75}: 5–95% range[0.191, 0.350]
Median pairwise Wasserstein distance0.060 (10.7% σLSI\sigma_{\mathrm{LSI}})
LOO stressed fraction: mean0.256
LOO stressed fraction: min / max0.181 / 0.316

Table I. Transportability of the global stress threshold across sessions. Per-session thresholds and pairwise distances are reported relative to the LSI standard deviation (σLSI\sigma_{\mathrm{LSI}}); the leave-one-session-out (LOO) stressed fraction applies the threshold estimated on all remaining sessions to each held-out session.

We therefore adopt the global threshold q0.75glob=0.264q_{0.75}^{\mathrm{glob}}=0.264. The LSI was introduced in our earlier work [40], where we assessed its robustness to the choice of components and threshold levels, as well as the contribution of each component to regime transitions. In that specification, the LSI combined the bid–ask spread, the mid-price volatility and the total depth of the LOB. The robustness checks showed that the sign with which depth entered the index had little effect on the resulting classification, indicating that the component carried limited information about stress. We therefore replace it here with the absolute queue imbalance (Eq. (2)), a depth-based quantity with an unambiguous directional interpretation: values close to one indicate a one-sided, fragile book, while values close to zero indicate balanced liquidity on both sides.

The State-dependent Hawkes Process

Let N(t)=(NH(t),NQ(t))TN(t)=\left(N_{\mathrm{H}}(t),N_{\mathrm{Q}}(t)\right)^{\mathsf{T}} be a bivariate counting process, where Ne(t)N_e(t) records the cumulative number of events of type e∈E={H,Q}e\in\mathcal{E}=\{\mathrm{H},\mathrm{Q}\} up to time tt. We model its conditional intensity, λe(t) dt=E[dNe(t)∣Ht−]\lambda_e(t)\,dt=\mathbb{E}[dN_e(t)\mid\mathcal{H}_{t-}], as a self-exciting process that adapts to the prevailing market regime. By letting S(t)∈{0,1}S(t)\in\{0,1\} denote the observed regime (Normal or Stressed, evaluated at t−t-), we define the state-dependent conditional intensity for target event ee directly as:

λe(t)=∑x=011{S(t)=x}(μx,e+∑e′∈E∑ti∈e′κe′→e(x)(t−ti)).(8)\lambda_e(t)=\sum_{x=0}^{1}\mathbb{1}\{S(t)=x\}\left(\mu_{x,e}+\sum_{e'\in\mathcal{E}}\sum_{t_i\in e'}\kappa_{e'\to e}^{(x)}(t-t_i)\right). \tag*{(8)}

This decomposes the arrival rate into two components:

  • Baseline intensity (μx,e≥0\mu_{x,e}\ge0): the exogenous spontaneous rate of arrival for event ee, depending only on the current regime x=S(t)x=S(t).

  • Excitation integral: the cumulative endogenous impact of all past events of type e′e' on the current arrival probability of event ee, modulated by the current regime.

The function κe′→e(x)(τ)\kappa_{e'\to e}^{(x)}(\tau) is the excitation kernel: it determines how the impact of a past event of type e′e' on future events of type ee decays with the elapsed time τ>0\tau>0. The specification of κ\kappa is a central modelling choice of this paper, and we consider four alternatives, introduced next.

Kernel Specifications

Financial microstructure exhibits multi-scale memory: algorithms react in milliseconds, while human traders and slower strategies react over seconds or minutes. A kernel specification must therefore accommodate several coexisting timescales. The following two kernel specification families are considered in this work.

Exponential-mixture Kernels

The first family superposes RR exponential components,

κe′→e(x)(τ)=∑r=1Rαe′→e(x,r)exp⁡(−βe′→e(x,r)τ),τ>0,(9)\kappa_{e'\rightarrow e}^{(x)}(\tau)=\sum_{r=1}^{R}\alpha_{e'\rightarrow e}^{(x,r)}\exp\left(-\beta_{e'\rightarrow e}^{(x,r)}\tau\right),\qquad\tau>0, \tag*{(9)}

with magnitudes αe′→e(x,r)≥0\alpha_{e'\rightarrow e}^{(x,r)}\ge0 and decay rates βe′→e(x,r)>0\beta_{e'\rightarrow e}^{(x,r)}>0. Each component rr isolates one characteristic timescale 1/βe′→e(x,r)1/\beta_{e'\rightarrow e}^{(x,r)}, so that increasing RR allows progressively richer structure in the market’s memory. We estimate (9) for three alternatives: R∈{1,2,3}R\in\{1,2,3\}.

Power-law Kernel

The second family does not impose a single characteristic decay timescale,

κe′→e(x)(τ)=αe′→e(x)(τ+ce′→e(x))−ηe′→e(x),τ>0,(10)\kappa_{e'\rightarrow e}^{(x)}(\tau)=\alpha_{e'\rightarrow e}^{(x)}\left(\tau+c_{e'\rightarrow e}^{(x)}\right)^{-\eta_{e'\rightarrow e}^{(x)}},\qquad\tau>0, \tag*{(10)}

with αe′→e(x)≥0\alpha_{e'\rightarrow e}^{(x)}\ge0, tail exponent ηe′→e(x)>1\eta_{e'\rightarrow e}^{(x)}>1 and regularisation ce′→e(x)>0c_{e'\rightarrow e}^{(x)}>0, the latter bounding the kernel at τ→0+\tau\rightarrow0^{+}. The constraint η>1\eta>1 guarantees an integrable kernel. This specification embodies long-memory dynamics: the excitation decays polynomially rather than geometrically, so remote events retain non-negligible influence.

Relation between The Two Families

The two families are more closely related than their functional forms suggest. For η>0\eta>0 and c>0c>0, the power-law kernel can be written as a weighted average of exponential kernels,

(τ+c)−η=1Γ(η)∫0∞uη−1e−uce−uτ du,(11)(\tau+c)^{-\eta}=\frac{1}{\Gamma(\eta)}\int_{0}^{\infty}u^{\eta-1}e^{-uc}e^{-u\tau}\,du, \tag*{(11)}

in which each decay rate uu receives weight m(u)∝uη−1e−ucm(u)\propto u^{\eta-1}e^{-uc}. A power-law kernel is thus a continuous mixture of exponential kernels with a continuum of decay rates. The RR-component mixture (9) approximates the same object by replacing that continuum with RR representative decay rates.

Equation (11) can be verified directly. It is an instance of Bernstein’s theorem [46], which states that a function on the positive half-line can be written as a mixture of exponentials precisely when it is completely monotone. The power-law kernel satisfies this condition, so a representation of the form (11) necessarily exists; the Gamma weight identifies the corresponding mixture. The same representation holds for any completely monotone kernel.

This identity reframes the comparison. Rather than opposing two unrelated functional forms, the choice between them comes back to an empirical question: how many distinct timescales (i.e., exponential components) are required to describe the market’s memory?

Figure 5 makes this relationship explicit. Panel (a) contrasts the continuum of decay rates underlying the power-law kernel with the finitely many rates selected by the exponential mixtures. Panel (b) shows that the approximation is accurate over the range of lags used for calibration and improves when RR increases, while panel (c) reports the associated approximation error. Here the error is measured as the largest relative gap between the two kernels over the comparison lag range, expressed as a percentage of the power-law kernel. This represents a worst-case error, and the typical gap is considerably smaller at most lags. The exponential mixtures shown are those that approximate the power-law kernel as closely as possible for a given RR. Beyond the calibration range, every finite RR exponential mixture decays geometrically and therefore underestimates the power-law tail, however large RR becomes.

Figure 5. Relationship between the exponential-mixture and power-law kernels. (a) The power-law kernel corresponds to a continuum of exponential decay rates, weighted by the mixing density m(u)∝uη−1e−ucm(u) \propto u^{\eta-1}e^{-uc} of (11) (shaded). Markers indicate the decay rates selected for R=1R=1-, 22- and 33- by exponential mixtures fitted to the same kernel; their horizontal positions, not their heights, are informative. (b) Normalised kernels on a log–log scale. Within the calibration range (shaded) the exponential mixtures track the power-law increasingly closely as RR grows; beyond it they decay geometrically while the power-law decays polynomially, so the tail is underestimated for every finite RR. (c) Largest relative gap between the RR-component approximation and the power-law kernel over the calibration range, as a percentage of the latter; it decreases with RR but does not vanish. Parameters are illustrative (η=1.8\eta=1.8, c=0.05c=0.05), and the exponential mixtures are fitted to the power-law kernel over τ∈[10−2,10]\tau\in[10^{-2},10] s.

Multi-Session Log-Likelihood

Let j=1,…,Jj=1,\ldots,J index the independent trading sessions, each with event times and types {(tk(j),ek(j))}k=1Kj\{(t_k^{(j)},e_k^{(j)})\}_{k=1}^{K_j} observed on the window [0,Tj][0,T_j], alongside an observed state path S(j)(t)S^{(j)}(t) evaluated just before each event at tk(j)−t_k^{(j)-}. The joint log-likelihood over all sessions is

L(θ)=∑j=1J[∑k=1Kjlog⁡λek(j)(j)(tk(j))−∑e∈E∫0Tjλe(j)(t) dt](12)\mathcal{L}(\theta)=\sum_{j=1}^{J}\left[\sum_{k=1}^{K_j}\log\lambda_{e_k^{(j)}}^{(j)}(t_k^{(j)})-\sum_{e\in\mathcal{E}}\int_{0}^{T_j}\lambda_e^{(j)}(t)\,dt\right] \tag*{(12)}

where the intensity λe(j)(t)\lambda_e^{(j)}(t) follows (8) conditioned on the prevailing regime S(j)(t−)S^{(j)}(t^{-}). Expression (12) holds for any kernel; only the evaluation of λ\lambda and of the compensator ∫0Tjλe(j)(t) dt\int_{0}^{T_j}\lambda_e^{(j)}(t)\,dt depends on the specification.

Computational Structure and History Truncation

The two families differ in the cost of evaluating (12). For the exponential kernel, define the partial excitation sums as

Λe′→e(x,r)(t)=∑ti<t:ei=e′αe′→e(x,r)exp⁡(−βe′→e(x,r)(t−ti)).(13)\Lambda^{(x,r)}_{e'\to e}(t)=\sum_{t_i<t:e_i=e'}\alpha^{(x,r)}_{e'\to e}\exp\left(-\beta^{(x,r)}_{e'\to e}(t-t_i)\right). \tag*{(13)}

Memorylessness of the exponential gives the exact recursion, for consecutive events separated by Δ=tk+1−tk\Delta=t_{k+1}-t_k,

Λe′→e(x,r)(tk+1)=e−βe′→e(x,r)Δ(Λe′→e(x,r)(tk)+αe′→e(x,r)1{ek=e′}).(14)\Lambda^{(x,r)}_{e'\to e}(t_{k+1})=e^{-\beta^{(x,r)}_{e'\to e}\Delta}\left(\Lambda^{(x,r)}_{e'\to e}(t_k)+\alpha^{(x,r)}_{e'\to e}\mathbf{1}\{e_k=e'\}\right). \tag*{(14)}

The intensity therefore depends on the past only through the finitely many running sums (Λe′→e(x,r))r≤R\left(\Lambda^{(x,r)}_{e'\to e}\right)_{r\le R}; the entire event history is summarised by RR numbers per (e′,x,e)(e',x,e) cell, each updated in constant time as new events arrive. Evaluating (12) therefore requires a single pass through the data.

The power-law kernel admits no comparable summary. By (11) it corresponds to a continuum of decay rates, and no finite collection of running sums reproduces it, so λe(t)\lambda_e(t) depends on the full event history and every event must be compared with all of its predecessors. To keep estimation tractable, we truncate the excitation at a horizon Δmax⁡\Delta_{\max}, retaining in the sum (8) only those past events satisfying t−ti≤Δmax⁡t-t_i\le\Delta_{\max}. The consequences of this approximation are discussed in Section III-I.

Parameter Count and Computational Cost

Parameter Counts

With E=2E=2 event types and X=2X=2 regimes, each kernel tensor is indexed by (e′,x,e)(e',x,e) and therefore carries E2X=8E^2X=8 entries, while the baseline matrix μ\mu carries E2=4E^2=4. Each additional exponential component thus adds 8 parameters to α\alpha and 8 to β\beta. The power-law kernel replaces the decay tensor β\beta by the pair (η,c)(\eta,c), contributing 8 tail exponents and 8 regularisation constants. Table II summarizes the number of parameters in θ\theta for each specification.

Modelμ\muα\alphaβ\beta(η,c)(\eta,c)Total
1-Exp488–20
2-Exp41616–36
3-Exp42424–52
Power-law48–8+88+828

Table II. Number of estimated parameters per specification (E=2E=2, X=2X=2).

The power-law specification is thus more parsimonious than the two- and three-component exponential mixtures. It encodes multi-scale memory through a tail exponent rather than through additional timescales.

Algorithmic Complexity

The cost of a single likelihood evaluation differs across the two families, as summarised in Table III. Exponential kernels admit the recursive update (14); at each event the running sums Λe′,x,e,r\Lambda_{e',x,e,r}, a tensor of size RE2XRE^2X, are rescaled by e−βΔte^{-\beta\Delta t}, at a cost of O(RE2X)O(RE^2X) operations that does not depend on how much history precedes the event. The total cost of one evaluation is therefore O(NRE2X)O(NRE^2X): it grows linearly in the number of events NN, and doubling the sample doubles the cost.

ModelPer-eventTotalHistory
R-ExpO(RE2X)\mathcal{O}(RE^{2}X)O(NRE2X)\mathcal{O}(NRE^{2}X)Recursive
Power-law (no trunc.)O(NE)\mathcal{O}(NE)O(N2E)\mathcal{O}(N^{2}E)Full
Power-law (Δmax⁡\Delta_{\max})O(W‾E)\mathcal{O}(\overline{W}E)O(NW‾E)\mathcal{O}(N\overline{W}E)Windowed

Table III. Per-evaluation algorithmic complexity for R-Exp and power law. NN denotes the number of events and W‾=λ‾Δmax⁡\overline{W} = \overline{\lambda}\Delta_{\max} the mean number of events per truncation window.

The power-law kernel admits no such recursion, since (Δt+c)−η(\Delta t+c)^{-\eta} cannot be decomposed across consecutive intervals. Each event must instead be compared with every preceding event retained inside the truncation window Δmax⁡\Delta_{\max} introduced in Section III-E1, at a cost of O(WˉE)O(\bar{W}E) per event, where Wˉ=Δmax⁡λˉ\bar{W}=\Delta_{\max}\bar{\lambda} is the mean number of events falling inside a window and λˉ\bar{\lambda} the mean event rate. Two features of this bound matter in practice. First, without truncation Wˉ\bar{W} grows with the sample itself and the total cost becomes quadratic, O(N2E)O(N^2E), so that doubling the sample quadruples the squared cost. Second, Wˉ\bar{W} is proportional to the local event rate, so the cost per event is not uniform across the sample: it rises with book activity, and is therefore greatest during the dense, liquid periods that are of primary interest here.

Branching Matrix, Stability, and Spillover

For each regime xx, the kernel integrals assemble into the branching matrix G(x)∈R+E×EG^{(x)} \in\mathbb{R}_{+}^{E \times E},

Ge′e(x)=∫0∞κe′→e(x)(τ) dτ,(15)G_{e'e}^{(x)} = \int_{0}^{\infty} \kappa_{e'\to e}^{(x)}(\tau)\,\mathrm{d}\tau, \tag*{(15)}

whose entry Ge′e(x)G_{e'e}^{(x)} is the expected number of direct offspring events of type ee triggered by a single event of type e′e' while the system is in regime xx (rows index the source e′e', columns the target ee). Equivalently, it is the total increment in the intensity of ee accumulated over all future horizons following one event of type e′e'. Specialising (15) to the two families gives

Ge′e(x)=∑r=1Rαe′→e(x,r)βe′→e(x,r)andGe′e(x)=αe′→e(x)(βe′→e(x))1−ηe′→e(x)ηe′→e(x)−1,(16)G_{e'e}^{(x)} = \sum_{r=1}^{R} \frac{\alpha_{e'\to e}^{(x,r)}}{\beta_{e'\to e}^{(x,r)}} \quad\text{and} \quad G_{e'e}^{(x)} = \frac{\alpha_{e'\to e}^{(x)}\left(\beta_{e'\to e}^{(x)}\right)^{1-\eta_{e'\to e}^{(x)}}}{\eta_{e'\to e}^{(x)}-1}, \tag*{(16)}

respectively, the latter requiring ηe′→e(x)>1\eta_{e'\to e}^{(x)} > 1.

Let ρx=ρ(G(x))\rho_x = \rho(G^{(x)}) denote the spectral radius of G(x)G^{(x)}, that is, the largest modulus among its eigenvalues. The stability condition for a multivariate Hawkes process is

ρx<1,x∈{0,1},(17)\rho_x < 1, \qquad x \in\{0,1\}, \tag*{(17)}

which guarantees a subcritical process: each event triggers, on average, fewer than one direct successor, so activity initiated by an exogenous shock eventually dies out and the expected number of events it generates is finite. When ρx≥1\rho_x \ge1 the process is supercritical: activity becomes self-sustaining and the expected number of events generated by a single shock is unbounded.

The magnitude of ρx\rho_x has a direct economic interpretation as the endogeneity, or reflexivity, of the regime: it measures the share of order flow generated by the market’s own past activity rather than by exogenous information arrival. A value near zero describes a market driven by outside news; a value near one describes a market in which order flow is overwhelmingly a reaction to other order flow, so that shocks propagate with little attenuation.

Under (17) the process admits a cluster representation: each exogenous event initiates a cluster of subsequent events, in which every event may in turn trigger further ones. The matrix power (G(x))n(G^{(x)})^n then records the expected number of events arising at the nn-th order from the initiating event, and summing over all such rounds yields the spillover multiplier

Ψ(x)=∑n=0∞(G(x))n=(I−G(x))−1,(18)\Psi^{(x)} = \sum_{n=0}^{\infty} (G^{(x)})^n = (I-G^{(x)})^{-1}, \tag*{(18)}

whose entry Ψe′e(x)\Psi_{e'e}^{(x)} is the expected total number of events of type ee belonging to the cluster initiated by one exogenous event of type e′e'. The n=0n=0 term contributes the identity, so the diagonal entries count the initiating event itself; the geometric series converges precisely when ρx<1\rho_x < 1.

Estimation

We estimate θ\theta by penalised maximum likelihood. For the exponential family θ={μ,α,β}\theta= \{\mu,\alpha,\beta\}; for the power-law family θ={μ,α,η,c}\theta= \{\mu,\alpha,\eta,c\}.

Per-state Spectral-radius Penalty

Because stability strictly requires ρx<1\rho_x < 1, we penalise subcriticality during optimisation above a target threshold ρ⋆<1\rho^\star< 1:

P(θ)=∑x=01ωx(max⁡{0,ρx−ρ⋆})2,ωx>0.(19)\mathcal{P}(\theta) = \sum_{x=0}^{1} \omega_x \left(\max\{0,\rho_x-\rho^\star\}\right)^2, \qquad\omega_x > 0. \tag*{(19)}

Crucially, ρx\rho_x in (19) is the spectral radius of the regime-specific matrix G(x)G^{(x)} defined in (15), evaluated separately for each regime xx. The parameters are then estimated by maximising the penalised objective

J(θ)=L(θ)−P(θ).(20)\mathcal{J}(\theta) = \mathcal{L}(\theta)-\mathcal{P}(\theta). \tag*{(20)}

We set ρ⋆=0.95\rho^\star= 0.95 and ωx=ω=103\omega_x = \omega= 10^3 for both regimes. The penalty is a soft constraint: it is inactive wherever ρx≤ρ⋆\rho_x \le\rho^\star, and it grows quadratically beyond the threshold to discourage the supercritical region. Because the constraint binds for some fits, we report the magnitude of P(θ^)\mathcal{P}(\hat{\theta}) alongside the estimates.

Parametrisation and Optimisation

The objective (20) is maximised by the L-BFGS-B quasi-Newton algorithm, using analytical gradients of both L\mathcal{L} and P\mathcal{P}; these are derived in Appendix C.

Both families are estimated in logarithmic coordinates. For the exponential family we optimise in (log⁡μ,log⁡α,log⁡β)(\log\mu,\log\alpha,\log\beta), which enforces positivity without explicit constraints and rescales each gradient by the magnitude of its own parameter, so that baselines and decay rates, which differ by several orders of magnitude, become comparably responsive. For the power-law family we parametrise as (log⁡μ,log⁡α,log⁡(η−1),log⁡c)(\log\mu,\log\alpha,\log(\eta-1),\log c); the logarithm of η−1\eta-1 is bounded away from −∞-\infty because the branching integral (16) is singular as η↓1\eta\downarrow1, a singularity that would otherwise render the objective ill-conditioned near that boundary. The initialisation of the decay rates and excitation coefficients, and the box constraints imposed during optimisation, are described in Appendix H.

A fit is treated as converged only when the optimiser terminates on its first-order and relative-reduction criteria, rather than on an iteration or function-evaluation budget. Fits terminating on a budget are recorded as non-converged.

Limitations of the Power-Law Approximation

The truncation introduced in Section III-E1 warrants explicit discussion.

The exponential kernels are evaluated exactly: the recursion (14) is algebraically equivalent to the untruncated intensity. The power-law likelihood, by contrast, is evaluated on a kernel truncated at Δmax⁡\Delta_{\max}, and therefore approximates a different quantity. Two consequences follow.

First, the log-likelihood attained by the power-law specification is an approximation whose bias decreases with Δmax⁡\Delta_{\max} but does not vanish. Any comparison of likelihood-based quantities across the two families must be read in that light, since one is computed exactly and the other is not.

Second, the branching integral (16) for the power-law integrates the kernel over [0,∞)[0,\infty), whereas the likelihood constrains the kernel only on [0,Δmax⁡][0,\Delta_{\max}]. The tail mass beyond the truncation horizon is therefore extrapolated rather than estimated, and ρx\rho_x inherits that extrapolation—an effect that grows as ηe′→e1\eta'_e\to_e 1, precisely where the tail is heaviest. To quantify it, we report alongside ρx\rho_x the truncated branching radius obtained by integrating κ\kappa only to Δmax⁡\Delta_{\max}; a material gap between the two indicates that the stability estimate is driven by unobserved tail mass.

These limitations follow from the absence of a recursive representation for the power-law kernel that makes it computationally heavy, and they are the price of relaxing the assumption of a finite number of timescales.

Results

Kernel Comparison and Model Selection

We estimate the model separately for each contract, using the first month of each quarter of 2024: January, April, July and October of the Dutch XBID IDC market from EPEX SPOT. Each contract is fitted with four excitation kernels: the one-, two- and three-component exponential mixtures (1-Exp, 2-Exp, 3-Exp) and the power-law kernel. This yields 2,915 contract-level fits.

This subsection compares the four kernels and selects the specification used in the remainder of the paper. The comparison uses five criteria, reported in the following order. We begin with two formal tests on the time-rescaled residuals: the Kolmogorov–Smirnov test of the marginal distribution and the Ljung–Box test of residual independence. We then report the Wasserstein distance between the empirical residual distribution and its theoretical counterpart, which measures how far a model is from correct specification. We then turn to two likelihood-based criteria, the negative log-likelihood per event and the pairwise probability that one kernel attains a higher likelihood than another on the same contract. Finally, we report the share of estimations that converged, since a specification that fits well but converges rarely is not usable. All criteria are computed per contract and then aggregated, first by month and then across the four months.

Time-rescaled Residuals

Goodness of fit is assessed using residual analysis based on the Random Time Change Theorem. For each event type ee we compute the time-rescaled residuals

rn,e=∫tn−1,etn,eλe(t) dt,(21)r_{n,e}=\int_{t_{n-1,e}}^{t_{n,e}}\lambda_e(t)\,\mathrm{d}t, \tag*{(21)}

which are i.i.d. Exp(1) under correct specification. Because the model is regime-dependent, we also compute state-conditional residuals

rk,e(x)=∫tk−1,e(x)tk,e(x)1{S(t)=x}λe(t) dt,(22)r_{k,e}^{(x)}=\int_{t_{k-1,e}^{(x)}}^{t_{k,e}^{(x)}}\mathbf{1}\{S(t)=x\}\lambda_e(t)\,\mathrm{d}t, \tag*{(22)}

restricting attention to type-ee events occurring in state xx; these are also Exp(1) under correct regime-wise specification. Further detail is given in Appendix A.

Equations (21) and (22) give four residual streams per contract: Hourly and Quarter-Hourly submissions, each in the Normal and Stressed regimes. Every criterion below is computed on these streams. Two properties of this construction matter for the comparison. First, the null distribution does not depend on the model parameters, so residual-based criteria are directly comparable across the exponential and power-law families, unlike likelihood-based criteria. Second, the residuals test two distinct implications of correct specification, the marginal distribution and independence, and a model may satisfy one while violating the other; we therefore report both.

Distributional and Independence Tests

Table IV reports the share of contract-level tests that do not reject the respective null hypotheses: the Kolmogorov–Smirnov test for the Exp(1) null (left panel) and the Ljung–Box test of no residual serial correlation (right panel).

Kolmogorov–Smirnov (Distribution)Ljung–Box (Independence)
Month1-Exp2-Exp3-ExpPower-law1-Exp2-Exp3-ExpPower-law
January0.8260.9100.9240.8970.2350.3380.3500.213
April0.8570.9280.9310.8860.2450.2550.2630.159
July0.8720.9220.9180.9040.2150.2490.2370.117
October0.8690.9300.9320.9140.1900.2260.2200.087
All0.8560.9220.9260.9000.2210.2670.2680.144

Table IV. Share of contract-level tests that do not reject the respective null hypotheses, by month and kernel. The left panel shows the Kolmogorov–Smirnov test for the Exp(1) null; the right panel shows the Ljung–Box test for the absence of residual serial correlation. Higher is better; the best kernel in each row is in bold.

For the Kolmogorov–Smirnov test, the 3-Exp kernel passes most often in three of the four months and pooled across all months, with the 2-Exp kernel close behind and marginally ahead in July. The single-exponential kernel passes least often in every month, and the power-law kernel lies between the single-exponential kernel and the richer mixtures. The ordering is the same in three months out of four.

Pass rates are much lower for the Ljung–Box test than for the Kolmogorov–Smirnov test, between 9% and 35% depending on the kernel and month. Residual serial dependence therefore remains for a majority of contracts under all four specifications, and no kernel considered here can be regarded as correctly specified in this respect. The relative ordering is nevertheless consistent: the two- and three-component mixtures leave the least serial dependence and are close to each other, while the power-law kernel leaves clearly the most, passing on only 14.4% of contract-stream pairs pooled across months.

Distance to the Theoretical Distribution

A test reports only whether a contract is rejected, not how large the departure from the null is. Two specifications can therefore show similar pass rates while differing in how closely they fit. We therefore also measure the size of the departure, using the first Wasserstein distance W1W_1 between the empirical distribution of the residuals of a contract and the Exp(1) law. Smaller values indicate a closer fit. Table V reports the median across contracts by month.

Month1-Exp2-Exp3-ExpPower-lawContracts
January0.08570.06870.06570.0956741
April0.08530.06800.06760.1013707
July0.08070.06940.06990.0993738
October0.07960.05940.05820.0892729
All0.08340.06610.06510.09632,915

Table V. Median W1W_1 distance between the time-rescaled residuals and the Exp(1) law, by month and kernel. Values are medians across contracts, averaged over the four event streams and weighted by the number of contracts. Lower is better; the best kernel in each row is in bold. The last column gives the number of contracts.

The ranking matches that of the two tests and is stable across months. The gain from adding a second exponential component is substantial, from 0.0834 to 0.0661 pooled, a reduction of about 21%, while the further gain from a third component is small, from 0.0661 to 0.0651, about 1.5%. The power-law kernel has the largest distance in every month. Absolute fit is somewhat better in October than in the other months for all four kernels, indicating month-to-month variation in how well the model describes the data, but this does not alter the ranking.

Figure 6 presents the same comparison graphically, together with the breakdown by event stream and regime.

Figure 6. Goodness of fit of the four kernels. Panel (a) reports the median W1W_1 distance between the time-rescaled residuals and the Exp(1) law, by month. Panel (b) reports the same quantity pooled across months and broken down by event stream (Hourly and Quarter-Hourly submissions) and regime (Normal, Stressed). Lower bars indicate a closer fit. The ranking of the kernels is the same in every month, and the differences between kernels are largest in the Stressed regime.

The breakdown by stream in Table VI shows where the kernels differ most.

EventRegime1-Exp2-Exp3-ExpPower-law
HNormal0.07290.06920.06910.0769
HStressed0.08150.07350.07280.1128
QNormal0.07230.05380.05430.0754
QStressed0.10570.06850.06460.1202

Table VI. Median W1W_1 distance by event stream and regime, pooled across the four months. Lower is better; the best kernel in each row is in bold.

Differences between kernels are small in the Normal regime and larger in the Stressed regime, where the single-exponential and power-law kernels deteriorate markedly. The effect is strongest for the Quarter-Hourly stream under stress, where the distance rises from 0.0646 for the 3-Exp kernel to 0.1057 for the 1-Exp kernel and 0.1202 for the power-law kernel. The kernels are hardest to distinguish under the least demanding conditions and easiest to distinguish under stress.

Likelihood-based Comparison

Table VII reports the negative log-likelihood per event, which normalises the likelihood by the number of events and therefore allows comparison across contracts of different lengths, together with the mean difference in total log-likelihood relative to the 3-Exp kernel on the same contract.

The likelihood ranking coincides with the residual-based ranking. The 3-Exp kernel attains the lowest negative log-likelihood per event, followed by the 2-Exp kernel, the power-law kernel and the single-exponential kernel. The paired differences show that the improvement of the 3-Exp over the 2-Exp kernel is small relative to its dispersion across contracts, whereas the gap to the single-exponential and power-law kernels is large. The power-law likelihood is evaluated on a truncated kernel, as discussed in Section III-I, so its likelihood-based figures are not strictly comparable with those of the exponential kernels; the residual-based results above are unaffected by this and give the same ordering.

KernelNLL/eventΔ\Delta LLH vs. 3-ExpContracts
1-Exp1.2708−1072.05-1072.05 (1097.10)2,915
2-Exp1.2067−161.99-161.99 (447.99)2,915
3-Exp1.1950— (reference)2,915
Power-law1.2480−755.23-755.23 (706.52)2,913

Table VII. Negative log-likelihood per event and paired log-likelihood differences relative to the 3-Exp kernel. The paired difference is computed contract by contract, so both kernels are evaluated on identical data; negative values indicate a worse fit than the reference. Standard deviations across contracts are in parentheses. Lower NLL per event is better.

Table VII reports the pairwise probability that the kernel in the row attains a higher log-likelihood than the kernel in the column on the same contract. This summary depends only on the sign of the likelihood differences, not their magnitude, and is therefore robust to the small number of contracts with extreme values.

1-Exp2-Exp3-ExpPower-law
1-Exp—0.0100.0030.233
2-Exp0.990—0.1750.982
3-Exp0.9970.825—0.995
Power-law0.7670.0180.005—

Table VIII. Pairwise win rates: PP(row kernel beats column kernel), computed contract by contract and pooled across the four months. A value above 0.5 indicates that the row kernel fits better on a majority of contracts.

The win rates confirm a clear overall ordering. The 3-Exp kernel fits better than the single-exponential kernel on 99.7% of contracts, better than the power-law kernel on 99.5%, and better than the 2-Exp kernel on 82.5%. The power-law kernel beats the single-exponential kernel on 76.7% of contracts but is beaten by both richer exponential mixtures of more than 98%. The only comparison that is not close to unanimous is between the two- and three-component mixtures, consistent with the small difference in their residual statistics.

Convergence

Table IX reports the number and share of contract-level estimations satisfying the convergence criterion stated in Section III-H2.

Convergence rates decline as the kernel becomes richer, which is expected since both the number of parameters and the difficulty of the optimisation increase. The power-law kernel converges least often, reflecting the poorer conditioning of its parametrisation near the boundary η→1\eta\to1. Convergence should be read alongside the fit statistics, because reported estimates from a fit that stopped on a budget depend on where the optimiser halted rather than on the data.

KernelAttemptedConvergedShare converged
1-Exp2,9152,90199.5%
2-Exp2,9152,86098.1%
3-Exp2,9152,78895.6%
Power-law2,9152,40282.4%

Table IX. Convergence of the contract-level estimations by kernel.

Model Selection

The five criteria agree. The three-component exponential mixture attains the highest pass rate on both residual tests, the lowest median W1W_1 distance in three of the four months and pooled across all months, the lowest negative log-likelihood per event, and a win rate above 0.82 against every competing kernel. The single-exponential kernel is dominated on every criterion, which indicates that a single timescale is too restrictive for this market. The power-law kernel is also dominated: it fits worse than both richer exponential mixtures on the residual criteria, which are the criteria comparable across the two families, it leaves the most residual serial dependence, and it converges least often.

The comparison between the two- and three-component mixtures is closer. The 3-Exp kernel is better on all pooled criteria, but the margins are small: the median W1W_1 distance differs by about 1.5%, the residual test pass rates by less than half a percentage point, and the 2-Exp kernel is marginally better in July on all three residual criteria. We nevertheless select the 3-Exp kernel for two reasons. First, it is better or equal on every pooled criterion and in three of the four months, so the choice does not rest on a single period. Second, the difference between the two specifications is largest in the Stressed regime and for the Quarter-Hourly stream, which are the conditions of primary interest in this paper; restricting the kernel to two components would sacrifice fit precisely where the model is used most.

The remainder of the results are based on the three-component exponential kernel.

Exogenous and Endogenous Order Flow

We now interpret the estimated three-exponential specification. Of the 2,915 contract-level estimations, 2,788 (95.6%) satisfy the convergence criterion and are subcritical in both regimes; these form the sample analysed below. All statistics are computed per contract and then aggregated. Every comparison between regimes is made within contract, so each contract is compared only with itself. Contracts differ widely in how active they are, depending on the delivery hour and the day of the week, and comparing regimes within a contract removes those differences from the comparison.

Baseline Intensities

The baseline intensity μx,e\mu_{x,e} measures the rate of order arrivals that the model attributes to sources outside the order book: fundamental information, scheduled position adjustments, and forecast revisions. Table X reports its estimated value by regime and contract.

MonthContractNormalStressedRatio S/NShare >1>1
JanuaryH0.0355 (0.0431)0.0305 (0.0446)0.8300.359
Q0.0146 (0.0194)0.0178 (0.0268)1.2030.583
AprilH0.0253 (0.0276)0.0224 (0.0312)0.8560.379
Q0.0099 (0.0155)0.0122 (0.0219)1.0900.538
JulyH0.0251 (0.0216)0.0209 (0.0259)0.8340.374
Q0.0179 (0.0222)0.0234 (0.0323)1.2010.607
OctoberH0.0353 (0.0309)0.0357 (0.0385)0.9740.473
Q0.0294 (0.0308)0.0342 (0.0381)1.1530.598
AllH0.0300 (0.0309)0.0268 (0.0354)0.8750.397
Q0.0170 (0.0235)0.0208 (0.0321)1.1690.582

Table X. Baseline intensities μx,e\mu_{x,e} by contract, regime and month, in events per second. Values are medians across contracts, with the interquartile range in parentheses. “Ratio S/N” is the median of the within-contract ratio μStressed/μNormal\mu_{\mathrm{Stressed}}/\mu_{\mathrm{Normal}} and “Share >1>1” the fraction of contracts for which that ratio exceeds one; both isolate the regime effect from differences in activity across contracts.

Figure 7 shows the distribution of the baseline across contracts, the distribution of the within-contract regime ratio, and the intraday profile of the baseline by delivery hour.

Figure 7. Baseline intensities. Panel (a) shows the distribution across contracts of μ\mu for each contract and regime, on a logarithmic scale. Panel (b) shows the distribution of the within-contract ratio μStressed/μNormal\mu_{\mathrm{Stressed}}/\mu_{\mathrm{Normal}}; mass to the right of zero indicates a higher exogenous arrival rate under stress. Panel (c) shows the median baseline by delivery hour, separately for each contract and regime.

The intraday profile in panel (c) is the clearest result of this subsection. Exogenous order flow follows a pronounced daily cycle: it is lowest for deliveries in the early morning hours, rises through the morning to a plateau between the ninth and seventeenth delivery hour, and falls for deliveries late in the evening, with the median baseline for the Quarter-Hourly contract varying by roughly an order of magnitude across the day. This is the shape one would expect if the baseline is capturing genuine outside information since imbalance in an intraday power market is driven by the same daily cycle of load and vRES generation. The two contracts differ in level throughout: the Hourly baseline lies above the Quarter-Hourly baseline at every delivery hour, consistent with the Hourly contract being the principal venue for exogenous position adjustment.

The regime effect on the baseline is contract-specific, and the two contracts move in opposite directions. The median within-contract ratio is 0.875 for the Hourly contract and 1.169 for the Quarter-Hourly contract, and the share of contracts with a ratio above one is 0.397 and 0.582, respectively. The pattern holds in all four months. Stress therefore does not uniformly raise the rate of exogenous order arrivals: exogenous activity shifts away from the principal contract and towards the granular one. This is the first indication of a broader pattern documented below, in which the Quarter-Hourly contract gains relative importance under stress.

The relative weight of the two contracts also varies seasonally. In the Normal regime the Hourly baseline exceeds the Quarter-Hourly baseline by a factor of 2.4 in January and 2.6 in April, but only 1.4 in July and 1.2 in October, so the granular contract accounts for a substantially larger share of exogenous order flow in the second half of the year.

Two features of panel (a) qualify these numbers. The lower whisker of every box reaches 10−410^{-4}, which is the lower bound imposed on μ\mu during optimisation, so for a subset of contracts the baseline is not interior. The same feature is visible in panel (b) as a concentration of mass at a ratio of exactly one, arising from contracts in which the baseline is at the bound in both regimes. The baseline should therefore be read as an upper bound on the exogenous share for those contracts, and the aggregate statement that endogeneity is high is, if anything, conservative.

The Branching Matrix and Degree of Endogeneity

Table XI reports the estimated branching matrix. Entry Ge,e′(x)G^{(x)}_{e,e'} is the expected number of type-ee orders directly triggered by one type-e′e' order in regime xx.

Two features stand out. First, the matrix is strongly diagonally dominant. An Hourly order triggers on average 0.87 further Hourly orders but only 0.02 Quarter-Hourly orders, and a Quarter-Hourly order triggers 0.90 further Quarter-Hourly orders but only 0.05 Hourly orders. Direct self-excitation is therefore between seventeen and forty-one times larger than direct cross-excitation. Order flow in each contract is overwhelmingly a reaction to activity in the same contract: order splitting, queue competition and quote revision within a single book.

Second, and more importantly, the spectral radius is close to unity in both regimes, at 0.952 under Normal conditions and 0.956 under Stress. Since ρx\rho_x is the share of activity generated endogenously, roughly 95% of observed order flow is a reaction to previous order flow, and only about 5% is attributable to information arriving from outside the book. The intraday power market is therefore highly reflexive: almost all of what happens in the order book is the market responding to itself. This near-critical value also means that the market sits close to the boundary at which shocks cease to be damped, which is the sense in which liquidity in this market is fragile.

The regime effect on endogeneity is small. Table XII reports the median within-contract difference between regimes, with bootstrap confidence intervals and the share of contracts for which the difference is positive.

QuantityMonthMedian diff.95% CIShare >0> 0nn
ρ\rhoJanuary+0.0031[+0.0009, +0.0062]0.542690
April−0.0012[−0.0042, +0.0010]0.478663
July+0.0010[−0.0022, +0.0041]0.514722
October+0.0086[+0.0052, +0.0127]0.603712
All+0.0025[+0.0012, +0.0040]0.5352,787
ΨH→Q\Psi_{H \to Q}January+0.927[+0.562, +1.390]0.613690
April+0.869[+0.518, +1.273]0.572663
July+0.054[−0.278, +0.437]0.507722
October+0.327[+0.071, +0.535]0.545712
All+0.542[+0.381, +0.720]0.5582,787
ΨQ→H\Psi_{Q \to H}January−1.502[−2.328, −0.613]0.426690
April−4.227[−6.052, −2.649]0.371663
July−0.619[−1.291, +0.182]0.468722
October+0.012[−0.792, +0.603]0.501712
All−1.233[−1.624, −0.756]0.4432,787
Asymmetry AAJanuary+0.219[+0.135, +0.320]0.628690
April+0.273[+0.158, +0.429]0.618663
July+0.083[+0.000, +0.143]0.536722
October+0.077[+0.007, +0.176]0.546712
All+0.148[+0.126, +0.201]0.5812,787

Table XII. Within-contract differences between the Stressed and Normal regimes. Each row reports the median of qStressed−qNormalq_{\mathrm{Stressed}} - q_{\mathrm{Normal}} computed contract by contract, a 95% percentile bootstrap confidence interval for that median, and the share of contracts with a positive difference. A confidence interval excluding zero indicates a regime effect that is consistent across contracts.

Pooled across months, endogeneity is higher under stress, but the difference is +0.0025 and the share of contracts with a positive difference is only 0.535, barely above one half. The effect is also not stable across months: it is positive and significant in January and October, indistinguishable from zero in July, and negative in point estimate in April. We therefore do not read the data as showing that market stress raises the degree of endogeneity. What the results do show is that endogeneity is uniformly high: the market is close to critical in both regimes, and the Stressed regime is not distinguished by being more reflexive. As shown next, what stress changes is not how much of the order flow is endogenous, but where it flows.

Cross-Product Liquidity Spillovers

Direct and Total Transmission

The direct entries of G(x)G^{(x)} understate cross-product transmission, because an order that triggers an order in the other contract also triggers further orders in its own contract, each of which can spill over in turn. The total effect is given by the spillover multiplier Ψ(x)=(I−G(x))−1\Psi^{(x)} = (I-G^{(x)})^{-1} of (18). Table XIII reports both.

RegimeH→QH \to Q GGH→QH \to Q Ψ\PsiAmplif.Q→HQ \to H GGQ→HQ \to H Ψ\PsiAA
Normal0.0212.390×113\times1130.0526.675−0.442
Stressed0.0353.393×97\times970.0495.238−0.175

Table XIII. First-round and total cross-product transmission by regime. GG is the direct branching entry, which counts the orders triggered in the first round; Ψ\Psi is the corresponding entry of the spillover multiplier, which counts the orders appearing in the whole cluster initiated by one exogenous order. “Amplif.” is the median across contracts of the per-contract ratio Ψ/G\Psi/G, not the ratio of the medians reported in the adjacent columns. The asymmetry index is A=(ΨH→Q−ΨQ→H)/(ΨH→Q+ΨQ→H)A = (\Psi_{H \to Q} - \Psi_{Q \to H})/(\Psi_{H \to Q} + \Psi_{Q \to H}); a negative value indicates that total transmission runs predominantly from the Quarter-Hourly to the Hourly contract. All values are medians across contracts.

The two quantities in Table XIII measure different things. The direct entry Ge′e(x)G^{(x)}_{e'e} counts the type-ee orders triggered by one type-e′e' order in the first round only. The multiplier entry Ψe′e(x)\Psi^{(x)}_{e'e} counts the type-ee orders appearing in the entire cluster initiated by one exogenous type-e′e' order, summing the first round and every subsequent one. Both are expressed in the same units, expected orders per initiating order, so their ratio is well defined: it is the number of orders generated across all rounds divided by the number generated in the first.

That ratio is large. For transmission from the Hourly to the Quarter-Hourly contract, the median across contracts is 112 in the Normal regime and 97 under stress. The reason is the near-critical diagonal documented above. An order that crosses into the other book arrives in a book that multiplies its own order flow by a factor of roughly 1/(1−0.9)1/(1-0.9), and each of the resulting orders can cross back. A weak first-round link therefore produces a large cumulative effect. Cross-product spillovers in this market are potentially important even though the first-round coefficients appear negligible, and a measure based on G(x)G^{(x)} alone would understate them by about two orders of magnitude.

Because Ψ(x)\Psi^{(x)} is a non-linear function of G(x)G^{(x)}, the median of Ψ(x)\Psi^{(x)} across contracts is not the multiplier implied by the median G(x)G^{(x)}. The two blocks of Table XIII are therefore computed separately and should not be chained; the amplification column reports the median of the per-contract ratios rather than the ratio of the medians.

The Direction of Transmission and Its Regime Dependence

In both regimes the asymmetry index is negative: total transmission runs predominantly from the Quarter-Hourly to the Hourly contract. Under Normal conditions one exogenous Quarter-Hourly order ultimately generates 6.68 Hourly orders over the cluster it initiates, whereas one exogenous Hourly order generates 2.39 Quarter-Hourly orders, a ratio of 2.8 to 1. The more granular contract leads the coarser one. This is consistent with the Quarter-Hourly contract being where imbalance is expressed first, with the Hourly contract subsequently repriced or hedged against it.

Market stress compresses this asymmetry. Under Stress the ratio falls from 2.8 to 1.5, and the asymmetry index moves from −0.442 to −0.175. The within-contract results in Table XII show that this is the most robust regime effect in the estimates: the asymmetry increases under stress in all four months, every confidence interval excludes zero, and the difference is positive for 58.1% of contracts. The two components move in opposite directions, as they should if the change is a genuine reorientation of the market rather than a level effect: ΨH→Q\Psi_{H\to Q} rises by 0.54 and ΨQ→H\Psi_{Q\to H} falls by 1.23, both significantly pooled across months. The direct coefficient GH→QG_{H\to Q} rises by 64% under stress, from 0.021 to 0.035, while GQ→HG_{Q\to H} falls slightly.

The economic reading is that the leadership structure of the market weakens under stress. In calm conditions the two books are linked but hierarchical, with the Quarter-Hourly contract setting the pace. Under stress the Hourly contract becomes a materially stronger source of spillover and the two contracts influence each other almost equally. For a participant hedging across the two contracts, this means the direction in which liquidity shocks propagate is not a stable property of the market: a hedge calibrated on the leadership structure of calm periods becomes less reliable precisely when it is most needed.

Intraday and Weekly Variation

Figure 8 shows how cross-product transmission varies over the delivery cycle and between weekdays and weekends. The dominance of the Quarter-Hourly contract is strongly time-varying. Under Normal conditions the asymmetry index is most negative for deliveries in the overnight hours, reaching −0.72 at hour 3 and −0.69 at hour 23, and is weakest around midday, at −0.27 at hour 11. The total transmission ΨQ→H\Psi_{Q \to H} is correspondingly larger overnight, at 12.2 for deliveries at hours 0, 1 and 23, against approximately 5 for midday deliveries. Overnight delivery hours are thin, and in a thin market the Hourly book appears to depend heavily on information expressed first in the Quarter-Hourly contract. During the middle of the day, when both books are more actively traded, the two contracts are closer to equal footing.

Figure 8. Variation of cross-product spillovers over the delivery cycle and the week. Panel (a) shows the median total transmission Ψ\Psi across all eligible contracts from the four estimation months, grouped by delivery hour for both directions and both regimes; the vertical distance between the two lines of a given regime is the imbalance between the directions. Panel (b) shows the median asymmetry index A=(ΨH→Q−ΨQ→H)/(ΨH→Q+ΨQ→H)A = (\Psi_{H\to Q} - \Psi_{Q\to H})/(\Psi_{H\to Q} + \Psi_{Q\to H}) by delivery hour. The index is bounded between −1-1 and 11 and is scale-free: A=0A = 0 means the two contracts transmit equally, A<0A < 0 means transmission runs predominantly from the Quarter-Hourly to the Hourly contract, and A>0A > 0 the reverse. Panel (c) compares the asymmetry index on weekdays and at weekends.

Under Stress the intraday pattern flattens: the asymmetry index remains within a narrower band and is close to zero for most delivery hours, and for deliveries at hour 22 it is marginally positive. Panel (b) also shows that the regime effect holds at every point of the delivery cycle: the Stressed curve lies above the Normal curve for all twenty-four delivery hours, so the compression of the asymmetry under stress is not driven by any particular part of the day. The regime effect and the intraday effect therefore work in the same direction, and the strongest hierarchical structure occurs where both point that way, in calm overnight markets.

Differences between weekdays and weekends are modest by comparison. The asymmetry index is −0.464 on weekdays and −0.371 at weekends in the Normal regime, and −0.212 against −0.102 under Stress, so weekends are slightly more symmetric in both regimes but the effect is small relative to the intraday and regime variation.

Seasonal Variation

The four estimation months span the seasonal cycle of the Dutch power system: January represents winter demand with limited solar generation, April the spring period with rapidly increasing solar generation and variable wind conditions, July the summer solar maximum, and October the autumn transition. Table XIV reports the main quantities by month and regime.

Monthρ\rhoΨH→Q\Psi_{H\to Q}ΨQ→H\Psi_{Q\to H}Asymmetry AAnn
Normal regime
January0.95361.967.21−0.541-0.541690
April0.95962.4212.31−0.659-0.659663
July0.95103.036.04−0.298-0.298722
October0.93681.954.64−0.347-0.347712
Range0.0231.087.670.361
Stressed regime
January0.95783.785.20−0.165-0.165690
April0.95934.066.03−0.207-0.207663
July0.95393.445.22−0.160-0.160722
October0.95212.604.85−0.189-0.189712
Range0.0071.461.180.047

Table XIV. Endogeneity and cross-product spillovers by month and regime. All values are medians across contracts. The final row of each block reports the range across the four months, which measures how much the market’s structure varies over the seasonal cycle.

The market’s structure varies considerably across the seasonal cycle in calm conditions. The asymmetry index ranges from −0.659-0.659 in April to −0.298-0.298 in July, and the total transmission from the Quarter-Hourly to the Hourly contract ranges from 12.31 in April to 4.64 in October, a factor of 2.7. April is the most extreme month on every measure: it has the highest endogeneity, the strongest Quarter-Hourly dominance and by far the largest ΨQ→H\Psi_{Q\to H}. This seasonal pattern is consistent with the variability of vRES generation in spring, when solar generation is increasing rapidly while wind conditions can remain relatively strong. Such variability can create more granular imbalance dynamics, which may be expressed first in the Quarter-Hourly contract. October, at the other extreme, has the lowest endogeneity and the weakest Quarter-Hourly dominance.

Another interesting result is that this seasonal heterogeneity largely disappears under stress. The range of the asymmetry index across months falls from 0.361 in the Normal regime to 0.047 under Stress, and the range of ΨQ→H\Psi_{Q\to H} falls from 7.67 to 1.18. The same holds for endogeneity, whose range narrows from 0.023 to 0.007. Under stress the four months look structurally alike, with an asymmetry index between −0.16-0.16 and −0.21-0.21 in every case.

The two observations are connected. The size of the regime effect on the asymmetry index reported in Table XII is almost perfectly inversely related to the level of asymmetry in the Normal regime: the correlation across the four months is −0.99-0.99. The months that are most Quarter-Hourly dominated in calm conditions, April and January, show the largest compression under stress, at +0.273 and +0.219; the months that are already close to symmetric, July and October, show the smallest, at +0.083 and +0.077. Stress therefore does not shift the market by a fixed amount. It moves the market towards a common configuration in which the two contracts transmit to each other at comparable strength, irrespective of the seasonal structure that prevails in calm conditions.

This has a direct implication for how the calm-period structure should be used. The leadership of the Quarter-Hourly contract is a feature of normal trading that varies with the season, not a stable property of the market. It is strongest exactly where it is least robust, in the sense that the months in which it is most pronounced are the months in which stress erodes it the most.

Response Speed and Shock Persistence

The branching matrix measures how much order flow one event ultimately generates, but not how quickly. Table XV reports, for each transmission channel, the time within which half and ninety per cent of the total excitation is delivered, and the mean excitation lag.

ChannelNormal t50t_{50}Normal t90t_{90}Normal Mean lagStressed t50t_{50}Stressed t90t_{90}Stressed Mean lagSpeed-up
H→HH \to H4.1529.013.263.6123.510.361.3×
H→QH \to Q0.0980.590.240.171.370.500.5×
Q→HQ \to H0.6817.86.050.262.380.936.5×
Q→QQ \to Q10.2376.630.748.3154.220.541.5×

Table XV. Speed and persistence of excitation by channel and regime. t50t_{50} and t90t_{90} are the elapsed times within which 50% and 90% of a channel’s total excitation has been delivered; the mean lag is the first moment of the normalised kernel. All values are in seconds and are medians across contracts.

The four channels operate on clearly separated timescales. Transmission from the Hourly to the Quarter-Hourly contract is by far the fastest: half of the effect is delivered within a tenth of a second and ninety per cent within six tenths of a second. This is the timescale of automated quoting, and it indicates that Quarter-Hourly quotes are updated mechanically in response to Hourly activity. Transmission in the opposite direction is an order of magnitude slower under Normal conditions, with a mean lag of six seconds and ninety per cent of the effect requiring almost eighteen seconds. Self excitation is slower still, particularly within the Quarter-Hourly book, where the mean lag is thirty seconds and 90% of the excitation is delivered within more than a minute. The asymmetry in speed complements the asymmetry in magnitude documented above. The Quarter-Hourly contract transmits more to the Hourly contract in total, but does so slowly; the Hourly contract transmits less, but almost instantaneously. The two channels therefore represent different mechanisms. The fast H→QH \to Q channel is consistent with automated requoting of the granular contract when the principal contract moves. The slow Q→HQ \to H channel is consistent with the gradual absorption of imbalance information by participants who must first observe it accumulate in the Quarter-Hourly book.

Cumulative response curves by cell and regime

Figure 9. Cumulative response curves. Each panel shows the share of a channel’s total excitation delivered within τ\tau seconds of the triggering event, for the Normal and Stressed regimes. The dotted horizontal lines mark the 50% and 90% levels. A curve that rises further to the left indicates faster transmission.

Market stress changes this picture substantially, and again the change is concentrated in the Q→HQ \to H channel. Its mean lag collapses from 6.05 to 0.93 seconds, a factor of 6.5, and the time to ninety per cent transmission falls from 17.8 to 2.4 seconds. Under stress, information expressed in the Quarter-Hourly book reaches the Hourly book within seconds rather than tens of seconds. Self-excitation also accelerates, though far less markedly, by factors of 1.3 and 1.5 for the Hourly and Quarter-Hourly books, respectively. The only channel that slows under stress is H→QH \to Q, whose mean lag doubles from 0.24 to 0.50 seconds while its total magnitude increases. Taken together with the spillover results, this gives a consistent characterisation of the Stressed regime. Market stress does not make the intraday market appreciably more reflexive: the share of endogenous order flow is essentially unchanged at around 95%. What changes is the structure of transmission between the two contracts. The hierarchy weakens, as the Hourly contract becomes a stronger source of spillover, and the slow channel from the Quarter-Hourly to the Hourly book becomes several times faster. Shocks therefore propagate across contracts both more symmetrically and more quickly under stress, which is the mechanism through which localised liquidity events in one contract can become market-wide events.

The Composition of Excitation

The changes in response speed are not a uniform acceleration of the market. They arise from a reallocation of excitation between the three timescales of the kernel. Figure 10 shows, for each channel and regime, the estimated half-life of the slow, medium and fast components and the share of the channel’s total branching mass that each carries.

Figure 10. Composition of the estimated kernels. The upper row shows the distribution across contracts of the half-life of each component, on a logarithmic scale; the lower row shows the median share of the channel’s total branching mass carried by each component. Slow, medium and fast refer to the three exponential components ordered by decay rate. Shares are medians taken separately for each component and therefore need not sum to one.

The two cross-product channels reallocate mass in opposite directions under stress. In the H→QH \to Q channel the share carried by the fast component falls from 0.360 to 0.228 while the share carried by the slow component rises from 0.077 to 0.232; in the Q→HQ \to H channel the slow share falls from 0.444 to 0.325. The half-lives move the same way: the slow component of the Q→HQ \to H channel accelerates from 4.85 to 0.92 seconds, a factor of 5.2, while the slow component of the H→QH \to Q channel decelerates from 0.158 to 0.459 seconds. Stress therefore does not simply speed the market up. It moves transmission from the Quarter-Hourly to the Hourly contract out of a slow channel and into faster ones, and moves transmission in the opposite direction partly out of its fast channel into a slower one. This is the mechanism underlying both the compression of the asymmetry index and the pattern of speed changes in Table XV.

Within each book the reallocation is milder and in the same direction for both contracts: the slow share rises under stress, from 0.196 to 0.252 in the H→HH \to H channel and from 0.312 to 0.423 in the Q→QQ \to Q channel, while the half-lives of all components shorten. Self-excitation thus becomes faster in every component while placing somewhat more of its weight on the slowest one, whereas the cross-product channels are restructured.

Robustness of the Kernel Decomposition

The three components of each kernel are not equally well identified. The decomposition into slow, medium and fast timescales is stable for the self-excitation channels, where fewer than 5% of contracts have a decay rate resting on a bound. For the cross-product channels the slow component is frequently inactive: its magnitude α\alpha is estimated at the lower bound for 48.3% of contracts in the H→QH \to Q channel and 49.4% in the Q→HQ \to H channel under Normal conditions. In these contracts the model attributes no slow cross-excitation at all, and cross-product transmission operates entirely through the medium and fast components. The fast component reaches the upper bound on the decay rate in 12 to 15% of contracts in the cross-product channels, so its timescale is not resolved beyond the granularity of the data; the branching mass it carries remains identified and is the quantity reported above.

The upper row of Figure 10 shows the consequence directly: the interquartile range of the slow component’s half-life spans 2.4 decades in the H→QH \to Q channel and 3.8 decades in the Q→HQ \to H channel, against approximately one decade for the corresponding component of the Q→QQ \to Q channel. These features do not affect the aggregate quantities of Table XI–Table XV, which depend on the integrated kernel rather than on the allocation of mass across components, but they do mean that the individual component timescales in the cross-product channels should be read as indicative rather than precise.

RegimeSource→\rightarrow H→\rightarrow Qρx\rho_x
NormalH0.87150.02120.9518
Q0.05240.9047
StressedH0.87770.03490.9555
Q0.04900.8574

Table XI. Direct branching matrix G(x)G^{(x)} and spectral radius ρx\rho_x by regime. Values are medians across the 2,787 contracts. Rows index the source contract, columns the target. The final column reports ρx\rho_x, which equals the share of order flow generated endogenously by the market’s own past.

Conclusion and Discussion

This paper studies how liquidity shocks travel between contracts of different granularity in the IDC market. Trading in the same delivery period takes place simultaneously in Hourly and Quarter-Hourly products, and activity in one book can trigger activity in the other. We ask how strong this cross-product transmission is, in which direction it runs, how long it takes, and whether it changes when liquidity deteriorates.

We model the two order books jointly as a SDHP. The baseline intensity and the excitation kernel both depend on an observed liquidity regime, so that the exogenous arrival of orders and the market’s reaction to its own past are estimated separately in calm and stressed conditions. We compare four excitation kernels within this framework, three exponential mixtures and one power law, and derive the analytical gradients of the multi-session log-likelihood and of the stability penalty for both kernel families, which is what makes estimation at the scale of individual contracts possible. The model is estimated separately for each of the 2,915 delivery contracts in the first month of each quarter of 2024, so that regimes are compared within the same contract and the results can be examined across delivery hours, days and seasons. The three-component exponential kernel performs best overall across the criteria and is used throughout.

The market turns out to be strongly self-driven. About ninety-five per cent of order flow is a reaction to earlier order flow, and only about five per cent arrives from outside the book, in both regimes. Because each book amplifies its own activity so heavily, a weak direct link between the two contracts produces a large cumulative effect: a first-round cross-excitation of about 0.02 orders corresponds to more than two orders once the full chain of reactions is counted. Cross-product effects that look negligible in the raw coefficients are in fact economically important.

Transmission between the two contracts is uneven. In calm conditions the Quarter-Hourly contract leads: one order there eventually generates 6.68 Hourly orders, against 2.39 in the opposite direction. This fits the role of the granular contract as the place where imbalance appears first. Under stress the gap narrows from 2.8 to 1.5, and the slow channel running from the Quarter-Hourly to the Hourly book speeds up, with its mean lag falling from six seconds to under one. Stress does not make the market more self-driven; the endogenous share barely moves. What changes is how the two books are connected. They become more equal and react to each other faster, which is how a liquidity problem in one contract can spread to the other.

This leadership is also seasonal. It is strongest in April and January and much weaker in July and October, but under stress all four months converge to nearly the same configuration, and the months with the strongest calm-period leadership are those where stress erodes it most. The order in which the two contracts respond is therefore a feature of normal trading rather than a fixed property of the market. A participant hedging across the two products cannot rely on it, and it is least dependable during stressed periods.

Limitations

EPEX SPOT records order messages to the millisecond, which is a very limited precision in comparison with the microsecond and nanosecond timestamps available in other markets. A Hawkes process requires a strictly positive time between successive events, so orders arriving less than a millisecond apart cannot be separated. We take the recorded sequence as the true order of arrival, but the spacing between such orders is not observed. The effect is visible in the estimates: for twelve to fifteen per cent of contracts the fastest kernel component rests on the upper bound of the decay rate, because the data cannot resolve excitation faster than the recording granularity. The mass carried by that component is still identified and is what we report, but its timescale is not.

The same limitation is why we model order submissions only. Submissions and cancellations often carry the same timestamp, since cancel-and-replace activity comes from the same algorithm within the same millisecond, so including both would create many simultaneous events. Estimating two separate models would avoid this but would remove the cross-effects between adding and cancelling liquidity, which is the reason for including cancellations in the first place. Finer timestamps, or a model that admits simultaneous events, would be needed.

The power-law kernel is estimated on a truncated excitation history, whereas the exponential kernels are exact. This is partly a property of the kernel: as shown in Section III-E1, the power law has no recursive representation, so its intensity depends on the whole history and exact evaluation is quadratic in the number of events. It is also partly a practical matter, since we estimate it with analytical gradients and a longer history is affordable at some cost in computation. The truncation means the power-law likelihood is not directly comparable with the exponential ones, which is why the kernel comparison rests on residual diagnostics instead. Since the power law was not selected, this does not affect the results, but it does limit its use as a robustness check.

Finally, we cover only the Hourly and Quarter-Hourly products. The market also lists Half-Hourly contracts, which we exclude because they are much less liquid and contract-level estimation needs enough events in each regime.

Acknowledgments

This research is fully funded by the Starter Grant awarded to Dr. Tarek Alskalf and Dr. Kwabena Bennin at the Information Technology Group, Wageningen University. It is partly supported by Project HighLO, a collaboration between Wageningen University & Research (WUR) and the European Organization for Nuclear Research (CERN), which aims to identify malicious trading behavior in electricity markets. During the preparation of this work, the authors used Claude (Anthropic) in order to assist with text editing, language refinement, and improving the clarity and structure of the manuscript. After using this tool, the authors reviewed and edited the content as needed and take full responsibility for the content of the published article.

Appendix

This appendix details the goodness-of-fit procedure used to evaluate the estimated point-process models. The procedure rests on the random time change theorem, which converts any simple point process with a strictly positive conditional intensity into a unit-rate Poisson process. Two features make it well suited to the present comparison. First, it applies to any conditional intensity, so it is common to all four kernel specifications and requires no modification from one to the next. Second, the resulting null distribution is free of the model parameters, so the diagnostic does not depend on the likelihood being evaluated exactly—a property that matters here, since the power-law likelihood is computed on a truncated kernel while the exponential likelihoods are exact.

Random time change

Let N(t)N(t) be a simple point process adapted to a history Ft\mathcal{F}_t, with bounded, strictly positive conditional F\mathcal{F}-intensity λ∗(t)\lambda^*(t) and compensator

Λ∗(t)=∫0tλ∗(u) du,(23)\Lambda^*(t) = \int_0^t \lambda^*(u)\,\mathrm{d}u, \tag*{(23)}

which is not almost surely bounded. The compensator is the cumulative expected number of events up to time tt, conditional on the past.

For a homogeneous Poisson process of unit rate, interarrival times are independent and exponentially distributed with unit mean. For an inhomogeneous or self-exciting process the intensity fluctuates, but a random change of time scale restores this structure. Intuitively, measuring time in units of Λ∗\Lambda^* rather than tt stretches the clock during periods of high intensity and compresses it when the intensity is low: clustered events are pulled apart, sparse events drawn together.

Theorem 1 (Random time change). Under the conditions above, the time-changed process

N~(t)=N(Λ∗−1(t))(24)\widetilde{N}(t) = N\left(\Lambda^{*-1}(t)\right) \tag*{(24)}

is a Poisson process of unit rate. Equivalently, the transformed interarrival times are independent and identically distributed Exp(1) random variables.

Remark 1 (Multivariate case). The result extends to multivariate point processes: if each component NeN_e is rescaled by its own compensator Λe∗\Lambda_e^*, the resulting processes are independent unit-rate Poisson processes. This is what licenses pooling residuals across event types, and across regimes and sessions, when assessing the Exp(1) null.

Residual construction

Fix a session jj and an event type ee, and let t1,e(j)<t2,e(j)<…t_{1,e}^{(j)} < t_{2,e}^{(j)} < \ldots denote the observed times of type-ee events in that session. The time-rescaled residuals are the increments of the compensator between consecutive events,

rn,e(j)=∫tn−1,e(j)tn,e(j)λe(j)(t) dt,(25)r_{n,e}^{(j)} = \int_{t_{n-1,e}^{(j)}}^{t_{n,e}^{(j)}} \lambda_e^{(j)}(t)\,\mathrm{d}t, \tag*{(25)}

where λe(j)\lambda_e^{(j)} is the fitted conditional intensity [8] evaluated with the estimated parameters θ^\hat{\theta}. The lower limit for the first residual is the end of the burn-in window rather than the session open, so that the intensity has accumulated a representative history before any residual is formed. The interval following the last observed event is right-censored by the session close TjT_j, is therefore not Exp(1), and is discarded. Under correct specification the rn,e(j)r_{n,e}^{(j)} are i.i.d. Exp(1); equivalently un,e(j)=1−exp⁡(−rn,e(j))u_{n,e}^{(j)} = 1 - \exp(-r_{n,e}^{(j)}) are i.i.d. uniform on [0,1][0,1].

Because the model is regime-dependent, we additionally form regime-conditional residuals. For a fixed regime xx, the type-ee events occurring while S(j)(t−)=xS^{(j)}(t-) = x constitute a point process whose conditional intensity is 1{S(j)(t−)=x}λe(j)(t)\mathbf{1}\{S^{(j)}(t-) = x\}\lambda_e^{(j)}(t); this is again predictable, since the regime path is observed and evaluated at t−t-. Let t1,e(j,x)<t2,e(j,x)<…t_{1,e}^{(j,x)} < t_{2,e}^{(j,x)} < \ldots denote the times of successive type-ee events that occur while the market is in regime xx. The corresponding residuals are

rk,e(j,x)=∫tk−1,e(j,x)tk,e(j,x)1{S(j)(t−)=x}λe(j)(t) dt.(26)r_{k,e}^{(j,x)} = \int_{t_{k-1,e}^{(j,x)}}^{t_{k,e}^{(j,x)}} \mathbf{1}\{S^{(j)}(t-) = x\}\lambda_e^{(j)}(t)\,\mathrm{d}t. \tag*{(26)}

The integral spans the entire interval between two consecutive regime-xx events of type ee, including any intervening excursions into the other regime, which contribute nothing on account of the indicator. By the same theorem, these residuals are i.i.d. Exp(1) under correct regime-wise specification.

Statistical evaluation

Two distinct implications of the null are assessed: that the residuals are marginally Exp(1), and that they are serially independent. A model may satisfy one and violate the other, so both are reported.

The marginal distribution is assessed graphically by quantile–quantile plots against the Exp(1) law, and numerically by the Kolmogorov–Smirnov distance between the empirical distribution of the residuals and the Exp(1) distribution function, together with their sample mean and variance, both equal to unity under the null. Serial independence is assessed by the lag-one autocorrelation of the residuals, which is zero under the null and which the marginal diagnostics cannot detect.

We report these quantities as discrepancy measures rather than as test statistics, and we do not attach pp-values to them. Two considerations motivate this choice. First, the number of residuals is of order 10610^6, at which sample size any formal test of distributional fit rejects for arbitrarily small departures from the null; a rejection would therefore convey no information about the relative adequacy of the four specifications. Second, the residuals are constructed from an intensity evaluated at estimated rather than known parameters, so the null distributions of the Kolmogorov–Smirnov and Anderson–Darling statistics are not those tabulated for a fully specified hypothesis. Comparing the magnitudes of these statistics across specifications remains informative, whereas comparing them against critical values does not.

Finally, since pooled residuals can conceal heterogeneity across trading sessions, we also report the distribution of the per-session Kolmogorov–Smirnov distance for each specification, which reveals whether a model that fits well on average deteriorates systematically on the stressed sessions of primary interest.

This appendix derives the gradients of the multi-session log-likelihood L\mathcal{L} and of the per-state spectral-radius penalty P\mathcal{P} with respect to the parameters of both kernel families. Throughout, j=1,…,Jj=1,\ldots,J indexes sessions, r=1,…,Rr=1,\ldots,R indexes exponential components, and S(j)(t)S^{(j)}(t) denotes the regime prevailing at time tt in session jj, evaluated at t−t^-.

Because the conditional intensity (8) is state-filtered, differentiation with respect to a parameter carrying the regime index xx produces the indicator 1{S(j)(t)=x}\mathbb{1}\{S^{(j)}(t)=x\}. This factor appears in both the event sums and the compensator integrals below: an event contributes to the gradient of a state-xx parameter only if it occurs while the market is in regime xx.

It is convenient to define the exposure time of regime xx in session jj,

Tx(j)=∫0Tj1{S(j)(t)=x} dt,x∈{0,1}.(27)\mathcal{T}_{x}^{(j)}=\int_{0}^{T_j}\mathbb{1}\{S^{(j)}(t)=x\}\,\mathrm{d}t,\qquad x\in\{0,1\}. \tag*{(27)}

Baseline Intensity

Since ∂λe(j)(t)/∂μx,e=1{S(j)(t)=x}\partial\lambda_e^{(j)}(t)/\partial\mu_{x,e}=\mathbb{1}\{S^{(j)}(t)=x\}, the baseline gradient is common to both kernel families:

∂L∂μx,e=∑j=1J∑k:ek(j)=e1{S(j)(tk(j)−)=x}λe(j)(tk(j))−∑j=1JTx(j).(28)\frac{\partial\mathcal{L}}{\partial\mu_{x,e}}=\sum_{j=1}^{J}\sum_{k:e_k^{(j)}=e}\frac{\mathbb{1}\{S^{(j)}(t_k^{(j)-})=x\}}{\lambda_e^{(j)}(t_k^{(j)})}-\sum_{j=1}^{J}\mathcal{T}_{x}^{(j)}. \tag*{(28)}

Exponential-mixture Kernel

History transforms.

For each (x,e′→e,r)(x,e'\to e,r) define the state-parameterised history sums

Re′→e(x,r),(j)(t)=∑ti(j)<tei(j)=e′exp⁡(−βe′→e(x,r)(t−ti(j))).(29)\mathcal{R}_{e'\to e}^{(x,r),(j)}(t)=\sum_{\substack{t_i^{(j)}<t\\e_i^{(j)}=e'}}\exp\left(-\beta_{e'\to e}^{(x,r)}(t-t_i^{(j)})\right). \tag*{(29)}
R~e′→e(x,r),(j)(t)=∑ti(j)<tei(j)=e′(t−ti(j))exp⁡(−βe′→e(x,r)(t−ti(j))).(30)\widetilde{\mathcal{R}}_{e'\to e}^{(x,r),(j)}(t)=\sum_{\substack{t_i^{(j)}<t\\e_i^{(j)}=e'}}(t-t_i^{(j)})\exp\left(-\beta_{e'\to e}^{(x,r)}(t-t_i^{(j)})\right). \tag*{(30)}

These relate to the partial sums Λe′→e(x,r)\Lambda_{e'\to e}^{(x,r)} of the main text by Λe′→e(x,r)=αe′→e(x,r)Re′→e(x,r)\Lambda_{e'\to e}^{(x,r)}=\alpha_{e'\to e}^{(x,r)}\mathcal{R}_{e'\to e}^{(x,r)}, and both obey the recursion (14), so each is evaluated in a single pass through the data.

Gradients.

Since ∂λe(j)(t)/∂αe′→e(x,r)=1{S(j)(t)=x}Re′→e(x,r),(j)(t)\partial\lambda_e^{(j)}(t)/\partial\alpha_{e'\to e}^{(x,r)}=\mathbb{1}\{S^{(j)}(t)=x\}\mathcal{R}_{e'\to e}^{(x,r),(j)}(t) and ∂λe(j)(t)/∂βe′→e(x,r)=−1{S(j)(t)=x}αe′→e(x,r)R~e′→e(x,r),(j)(t)\partial\lambda_e^{(j)}(t)/\partial\beta_{e'\to e}^{(x,r)}=-\mathbb{1}\{S^{(j)}(t)=x\}\alpha_{e'\to e}^{(x,r)}\widetilde{\mathcal{R}}_{e'\to e}^{(x,r),(j)}(t), we obtain

∂L∂αe′→e(x,r)=∑j=1J∑k:ek(j)=e1{S(j)(tk(j)−)=x}Re′→e(x,r),(j)(tk(j))λe(j)(tk(j))−∑j=1J∫0Tj1{S(j)(t)=x}Re′→e(x,r),(j)(t) dt,(31)\frac{\partial\mathcal{L}}{\partial\alpha_{e'\to e}^{(x,r)}}=\sum_{j=1}^{J}\sum_{k:e_k^{(j)}=e}\frac{\mathbb{1}\{S^{(j)}(t_k^{(j)-})=x\}\mathcal{R}_{e'\to e}^{(x,r),(j)}(t_k^{(j)})}{\lambda_e^{(j)}(t_k^{(j)})}-\sum_{j=1}^{J}\int_{0}^{T_j}\mathbb{1}\{S^{(j)}(t)=x\}\mathcal{R}_{e'\to e}^{(x,r),(j)}(t)\,\mathrm{d}t, \tag*{(31)}
∂L∂βe′→e(x,r)=−∑j=1J∑k:ek(j)=e1{S(j)(tk(j)−)=x}αe′→e(x,r)R~e′→e(x,r),(j)(tk(j))λe(j)(tk(j))+∑j=1J∫0Tj1{S(j)(t)=x}αe′→e(x,r)R~e′→e(x,r),(j)(t) dt,(32)\frac{\partial\mathcal{L}}{\partial\beta_{e'\to e}^{(x,r)}}=-\sum_{j=1}^{J}\sum_{k:e_k^{(j)}=e}\mathbb{1}\{S^{(j)}(t_k^{(j)-})=x\}\frac{\alpha_{e'\to e}^{(x,r)}\widetilde{\mathcal{R}}_{e'\to e}^{(x,r),(j)}(t_k^{(j)})}{\lambda_e^{(j)}(t_k^{(j)})}+\sum_{j=1}^{J}\int_{0}^{T_j}\mathbb{1}\{S^{(j)}(t)=x\}\alpha_{e'\to e}^{(x,r)}\widetilde{\mathcal{R}}_{e'\to e}^{(x,r),(j)}(t)\,\mathrm{d}t, \tag*{(32)}

for r=1,…,Rr=1,\ldots,R and x∈{0,1}x\in\{0,1\}.

Power-law Kernel

History transforms.

Write Δi=t−ti(j)\Delta_i=t-t_i^{(j)} and, for each (x,e′→e)(x,e'\to e), define

Ae′→e(x),(j)(t)=∑i<tei(j)=e′(Δi+ce′→e(x))−ηe′→e(x),(33)A_{e'\to e}^{(x),(j)}(t)=\sum_{\substack{i<t\\ e_i^{(j)}=e'}}(\Delta_i+c_{e'\to e}^{(x)})^{-\eta_{e'\to e}^{(x)}}, \tag*{(33)}
Be′→e(x),(j)(t)=∑i<tei(j)=e′(Δi+ce′→e(x))−ηe′→e(x)log⁡(Δi+ce′→e(x)),(34)B_{e'\to e}^{(x),(j)}(t)=\sum_{\substack{i<t\\ e_i^{(j)}=e'}}(\Delta_i+c_{e'\to e}^{(x)})^{-\eta_{e'\to e}^{(x)}}\log(\Delta_i+c_{e'\to e}^{(x)}), \tag*{(34)}
Ce′→e(x),(j)(t)=∑i<tei(j)=e′(Δi+ce′→e(x))−ηe′→e(x)−1.(35)C_{e'\to e}^{(x),(j)}(t)=\sum_{\substack{i<t\\ e_i^{(j)}=e'}}(\Delta_i+c_{e'\to e}^{(x)})^{-\eta_{e'\to e}^{(x)}-1}. \tag*{(35)}

In practice the sums in (33)–(35) are restricted to Δi≤Δmax⁡\Delta_i\le\Delta_{\max}, consistent with the truncation applied to the intensity itself. Note that AA, BB and CC share the factor (Δi+c)−η(\Delta_i+c)^{-\eta}, so all three are accumulated in one pass.

Gradients.

Differentiating κe′→e(x)(τ)=αe′→e(x)(τ+ce′→e(x))−ηe′→e(x)\kappa_{e'\to e}^{(x)}(\tau)=\alpha_{e'\to e}^{(x)}(\tau+c_{e'\to e}^{(x)})^{-\eta_{e'\to e}^{(x)}} gives ∂κ/∂α=(τ+c)−η\partial\kappa/\partial\alpha=(\tau+c)^{-\eta}, ∂κ/∂η=−α(τ+c)−ηlog⁡(τ+c)\partial\kappa/\partial\eta=-\alpha(\tau+c)^{-\eta}\log(\tau+c) and ∂κ/∂c=−αη(τ+c)−η−1\partial\kappa/\partial c=-\alpha\eta(\tau+c)^{-\eta-1}, whence (36)–(38):

∂L∂αe′→e(x)=∑j=1J∑k:ek(j)=e1{S(j)(tk(j)−)=x}Ae′→e(x),(j)(tk(j))λe(j)(tk(j))−∑j=1J∫0Tj1{S(j)(t)=x}Ae′→e(x),(j)(t) dt,(36)\frac{\partial\mathcal{L}}{\partial\alpha_{e'\to e}^{(x)}}=\sum_{j=1}^{J}\sum_{k:e_k^{(j)}=e}\mathbf{1}\{S^{(j)}(t_k^{(j)-})=x\}\frac{A_{e'\to e}^{(x),(j)}(t_k^{(j)})}{\lambda_e^{(j)}(t_k^{(j)})}-\sum_{j=1}^{J}\int_0^{T_j}\mathbf{1}\{S^{(j)}(t)=x\}A_{e'\to e}^{(x),(j)}(t)\,\mathrm{d}t, \tag*{(36)}
∂L∂ηe′→e(x)=−αe′→e(x)[∑j=1J∑k:ek(j)=e1{S(j)(tk(j)−)=x}Be′→e(x),(j)(tk(j))λe(j)(tk(j))−∑j=1J∫0Tj1{S(j)(t)=x}Be′→e(x),(j)(t) dt],(37)\frac{\partial\mathcal{L}}{\partial\eta_{e'\to e}^{(x)}}=-\alpha_{e'\to e}^{(x)}\left[\sum_{j=1}^{J}\sum_{k:e_k^{(j)}=e}\mathbf{1}\{S^{(j)}(t_k^{(j)-})=x\}\frac{B_{e'\to e}^{(x),(j)}(t_k^{(j)})}{\lambda_e^{(j)}(t_k^{(j)})}-\sum_{j=1}^{J}\int_0^{T_j}\mathbf{1}\{S^{(j)}(t)=x\}B_{e'\to e}^{(x),(j)}(t)\,\mathrm{d}t\right], \tag*{(37)}
∂L∂ce′→e(x)=−αe′→e(x)ηe′→e(x)[∑j=1J∑k:ek(j)=e1{S(j)(tk(j)−)=x}Ce′→e(x),(j)(tk(j))λe(j)(tk(j))−∑j=1J∫0Tj1{S(j)(t)=x}Ce′→e(x),(j)(t) dt].(38)\frac{\partial\mathcal{L}}{\partial c_{e'\to e}^{(x)}}=-\alpha_{e'\to e}^{(x)}\eta_{e'\to e}^{(x)}\left[\sum_{j=1}^{J}\sum_{k:e_k^{(j)}=e}\mathbf{1}\{S^{(j)}(t_k^{(j)-})=x\}\frac{C_{e'\to e}^{(x),(j)}(t_k^{(j)})}{\lambda_e^{(j)}(t_k^{(j)})}-\sum_{j=1}^{J}\int_0^{T_j}\mathbf{1}\{S^{(j)}(t)=x\}C_{e'\to e}^{(x),(j)}(t)\,\mathrm{d}t\right]. \tag*{(38)}

Penalty Gradient

The penalty depends on θ\theta only through the branching matrices G(0),G(1)G^{(0)},G^{(1)}, so its gradient factorises into three stages: the derivative of P\mathcal{P} with respect to ρx\rho_x, the derivative of ρx\rho_x with respect to G(x)G^{(x)}, and the derivative of G(x)G^{(x)} with respect to the kernel parameters. Only the last stage is kernel-specific.

Stage 1:

Writing Δx:=ρx−ρ∗\Delta_x:=\rho_x-\rho^* and sx:=max⁡{0,Δx}s_x:=\max\{0,\Delta_x\}, the penalty (19) is P(θ)=∑xωxsx2\mathcal{P}(\theta)=\sum_x\omega_xs_x^2 and

∂P∂ρx=2ωxsx1{Δx>0}.(39)\frac{\partial\mathcal{P}}{\partial\rho_x}=2\omega_xs_x\mathbf{1}\{\Delta_x>0\}. \tag*{(39)}

The penalty is therefore inactive, with zero gradient, whenever ρx≤ρ∗\rho_x\le\rho^*.

Stage 2:

Let ρx\rho_x be a simple eigenvalue of G(x)G^{(x)}, with right and left eigenvectors v(x)v^{(x)} and u(x)u^{(x)},

G(x)v(x)=ρxv(x),(u(x))TG(x)=ρx(u(x))T,G^{(x)}v^{(x)}=\rho_xv^{(x)},\qquad(u^{(x)})^{\mathsf{T}}G^{(x)}=\rho_x(u^{(x)})^{\mathsf{T}},

normalised so that (u(x))Tv(x)=1(u^{(x)})^{\mathsf{T}}v^{(x)}=1. The entrywise derivative is then

∂ρx∂Ge′e(x)=ue′(x)ve(x),(40)\frac{\partial\rho_x}{\partial G_{e'e}^{(x)}}=u_{e'}^{(x)}v_e^{(x)}, \tag*{(40)}

and, by the chain rule,

∂P∂Ge′e(x)=2ωxsx1{Δx>0}ue′(x)ve(x).(41)\frac{\partial\mathcal{P}}{\partial G_{e'e}^{(x)}}=2\omega_xs_x\mathbf{1}\{\Delta_x>0\}u_{e'}^{(x)}v_e^{(x)}. \tag*{(41)}

Because the estimated kernels have strictly positive amplitudes, G(x)G^{(x)} has strictly positive entries; by the Perron–Frobenius theorem its spectral radius is then a simple, positive eigenvalue with positive left and right eigenvectors, so (40) is well defined and ue′(x)ve(x)>0u_{e'}^{(x)}v_e^{(x)} > 0.

c) Stage 3a: exponential-mixture kernel.

From Ge′e(x)=∑r=1Rαe′→e(x,r)/βe′→e(x,r)G_{e'e}^{(x)} = \sum_{r=1}^{R} \alpha_{e'\to e}^{(x,r)} / \beta_{e'\to e}^{(x,r)},

∂Ge′e(x)∂αe′→e(x,r)=1βe′→e(x,r),∂Ge′e(x)∂βe′→e(x,r)=−αe′→e(x,r)(βe′→e(x,r))2.(42)\frac{\partial G_{e'e}^{(x)}}{\partial\alpha_{e'\to e}^{(x,r)}} = \frac{1}{\beta_{e'\to e}^{(x,r)}}, \qquad\frac{\partial G_{e'e}^{(x)}}{\partial\beta_{e'\to e}^{(x,r)}} = -\frac{\alpha_{e'\to e}^{(x,r)}}{\left(\beta_{e'\to e}^{(x,r)}\right)^2}. \tag*{(42)}

and combining with (41),

∂P∂αe′→e(x,r)=2ωxsx1{Δx>0}ue′(x)ve(x)1βe′→e(x,r).(43)\frac{\partial\mathcal{P}}{\partial\alpha_{e'\to e}^{(x,r)}} = 2\omega_x s_x 1\{\Delta_x > 0\}u_{e'}^{(x)}v_e^{(x)}\frac{1}{\beta_{e'\to e}^{(x,r)}}. \tag*{(43)}
∂P∂βe′→e(x,r)=−2ωxsx1{Δx>0}ue′(x)ve(x)αe′→e(x,r)(βe′→e(x,r))2.(44)\frac{\partial\mathcal{P}}{\partial\beta_{e'\to e}^{(x,r)}} = -2\omega_x s_x 1\{\Delta_x > 0\}u_{e'}^{(x)}v_e^{(x)}\frac{\alpha_{e'\to e}^{(x,r)}}{\left(\beta_{e'\to e}^{(x,r)}\right)^2}. \tag*{(44)}

d) Stage 3b: power-law kernel.

From Ge′e(x)=αe′→e(x)(ce′→e(x))1−ηe′→e(x)/(ηe′→e(x)−1)G_{e'e}^{(x)} = \alpha_{e'\to e}^{(x)}\left(c_{e'\to e}^{(x)}\right)^{1-\eta_{e'\to e}^{(x)}}/(\eta_{e'\to e}^{(x)}-1), suppressing indices for readability,

∂G∂α=Gα,\frac{\partial G}{\partial\alpha} = \frac{G}{\alpha},
∂G∂η=−G(log⁡c+1η−1),\frac{\partial G}{\partial\eta} = -G\left(\log c + \frac{1}{\eta-1}\right),
∂G∂c=−G(η−1)c.(45)\frac{\partial G}{\partial c} = -\frac{G(\eta-1)}{c}. \tag*{(45)}

each valid for η>1\eta> 1, and the penalty gradients follow from (41) exactly as above. Expression (45) makes the singularity as η↓1\eta\downarrow1 explicit: both GG and its derivative with respect to η\eta diverge, which motivates bounding log⁡(η−1)\log(\eta-1) away from −∞-\infty during optimisation.

e) Baseline parameters.

Since P\mathcal{P} depends on θ\theta only through G(x)G^{(x)},

∂P∂μx,e=0for all x∈{0,1}, e∈E.\frac{\partial\mathcal{P}}{\partial\mu_{x,e}} = 0 \qquad\text{for all } x \in\{0,1\},\ e \in\mathcal{E}.

Reparametrised Gradients for The Power-law Kernel

The power-law model is estimated in the coordinates (log⁡μ, log⁡α, log⁡(η−1), log⁡c)(\log\mu,\ \log\alpha,\ \log(\eta-1),\ \log c). Gradients transform by the chain rule,

∂J∂log⁡μ=μ∂J∂μ,∂J∂log⁡α=α∂J∂α,(46)\frac{\partial\mathcal{J}}{\partial\log\mu} = \mu\frac{\partial\mathcal{J}}{\partial\mu}, \qquad\frac{\partial\mathcal{J}}{\partial\log\alpha} = \alpha\frac{\partial\mathcal{J}}{\partial\alpha}, \tag*{(46)}
∂J∂log⁡(η−1)=(η−1)∂J∂η,∂J∂log⁡c=c∂J∂c,(47)\frac{\partial\mathcal{J}}{\partial\log(\eta-1)} = (\eta-1)\frac{\partial\mathcal{J}}{\partial\eta}, \qquad\frac{\partial\mathcal{J}}{\partial\log c} = c\frac{\partial\mathcal{J}}{\partial c}, \tag*{(47)}

applied entrywise to J=L−P\mathcal{J} = \mathcal{L} - \mathcal{P}.

The log-likelihood surface of a high-dimensional, multi-exponential Hawkes process is highly non-convex, so the result of an optimisation depends on where it starts. Rather than impose an ordering of timescales through a fixed starting point, we draw the starting values at random within economically admissible bounds, fit each contract independently, and run the optimiser to convergence. This keeps the estimated decomposition of timescales a property of the data rather than of the initialisation.

To capture the full spectrum of market memory, from macro-level human trading to millisecond bursts, we bound the decay parameters over a wide admissible range. We set βmin⁡=10−4\beta_{\min} = 10^{-4} and βmax⁡=1000.0\beta_{\max} = 1000.0, where the upper bound accommodates reactions on the order of 1/βmax⁡=11/\beta_{\max} = 1 millisecond, which is the lowest resolution of EPEX SPOT data. For a kernel with RR exponentials, we initialize the decay rates by drawing them at random, log-uniformly over this range, so that the starting point does not impose an ordering of timescales. Let r∈{1,…,R}r \in\{1,\ldots,R\} index the exponentials; for each cell the draws are sorted in increasing order, so that rr indexes the kernels from slow to fast:

log⁡βe′→e(x,r),(0)∼U(log⁡βmin⁡,log⁡βtop),x∈{0,1},(48)\log\beta_{e'\to e}^{(x,r),(0)} \sim\mathcal{U}(\log\beta_{\min},\log\beta_{\mathrm{top}}), \qquad x \in\{0,1\}, \tag*{(48)}

where the sampling ceiling βtop\beta_{\mathrm{top}} is taken from the smallest observed inter-event time rather than from βmax⁡\beta_{\max}. A component initialized at a rate so high that e−βτe^{-\beta\tau} underflows for every observed lag lies in a region where the likelihood is flat in both α\alpha and β\beta, and no gradient-based method can move it; keeping βtop\beta_{\mathrm{top}} inside the resolvable range ensures that every kernel starts where the data can inform it, while βmax⁡\beta_{\max} continues to act as a guard.

The baseline intensities are seeded from the unconditional empirical event rates. For each event type ee, let νe\nu_e be the unconditional rate pooled over the fitted contract. To break symmetry and reflect typical regime behaviour, we initialize the Normal state (State 0) baselines at 0.5νe0.5\nu_e and the Stressed state (State 1) baselines at 1.5νe1.5\nu_e:

μ0,e(0)=0.5 νe,μ1,e(0)=1.5 νe.(49)\mu_{0,e}^{(0)}=0.5\,\nu_e,\qquad\mu_{1,e}^{(0)}=1.5\,\nu_e. \tag*{(49)}

To keep the initial branching ratio safely subcritical and stable, the excitation coefficients (α\alpha) are initialized from a randomly drawn branching mass. For each cell and kernel we draw a target branching ratio bx,e′→e(p),(0)∼U(0.01, 0.30)b_{x,e'\to e}^{(p),(0)} \sim U(0.01,\,0.30), divide it evenly across the RR exponentials, and scale by the corresponding decay rate:

αx,e′→e(r),(0)=bx,e′→e(p),(0)R βx,e′→e(r),(0),r∈{1,…,R},x∈{0,1}.(50)\alpha_{x,e'\to e}^{(r),(0)}=\frac{b_{x,e'\to e}^{(p),(0)}}{R}\,\beta_{x,e'\to e}^{(r),(0)},\qquad r\in\{1,\ldots,R\},\quad x\in\{0,1\}. \tag*{(50)}

Drawing the masses independently across cells means that a kernel which fails to move from its starting point does not contribute the same value to every entry of the branching matrix, which makes such a component detectable by comparison with its initial value. We verify for each reported fit that the kernels have moved away from their initialization.

Minimization of the full penalized objective J(θ)\mathcal{J}(\theta) from (20) is carried out with the L-BFGS-B quasi-Newton algorithm in the logarithmic coordinates of Section III-H, from a single random initialization run to convergence. To accommodate the extreme clustering of the hourly contracts without log-likelihood underflow or spectral explosion, we enforce the following box constraints during optimization: μx,e∈[10−4,max⁡(100 μx,e(0),10.0)]\mu_{x,e}\in[10^{-4},\max(100\,\mu_{x,e}^{(0)},10.0)], αx,e′→e(r)∈[10−4,500.0]\alpha_{x,e'\to e}^{(r)}\in[10^{-4},500.0], and βx,e′→e(r)∈[10−4,1000.0]\beta_{x,e'\to e}^{(r)}\in[10^{-4},1000.0], for all states x∈{0,1}x\in\{0,1\} and exponential kernels r∈{1,…,R}r\in\{1,\ldots,R\}.

References

  1. [1]Eurelectric, “An overview of european short-term electricity markets: A eurelectric explainer,” Eurelectric, Brussels, Tech. Rep., January 2026.
  2. [2]L. R. Visser, T. A. AlSkaif, A. Khurram, J. Kleissl, and W. Van Sark, “Probabilistic solar power forecasting: An economic and technical evaluation of an optimal market bidding strategy,” Applied Energy, vol. 370, p. 123573, 2024.DOI
  3. [3]H. L. Le, V. Ilea, and C. Bovo, “Integrated european intra-day electricity market: Rules, modeling and analysis,” Applied energy, vol. 238, pp. 258–273, 2019.DOI
  4. [4]T. Serafin, G. Marciasz, and R. Weron, “Trading on short-term path forecasts of intraday electricity prices,” Energy Economics, vol. 112, p. 106125, 2022. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S014098832200281XDOI
  5. [5]M. Narajewski and F. Ziel, “Econometric modelling and forecasting of intraday electricity prices,” Journal of Commodity Markets, vol. 19, p. 100107, 2020. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S2405851319300728DOI
  6. [6]R. Grindel, “Electricity markets under the influence of renewables: Modelling, prediction, and stochastic optimization,” doctoralthesis, Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau, 2024. [Online]. Available: https://nbn-resolving.de/urn:nbn:de:hbz:386-kleduo-79287DOI
  7. [7]M. Narajewski and F. Ziel, “Ensemble forecasting for intraday electricity prices: Simulating trajectories,” Applied Energy, vol. 279, p. 115801, 2020. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0306261920312824DOI
  8. [8]S. Vogeler, Continuous Intraday Market Coupling Algorithm. Cham: Springer Nature Switzerland, 2025, pp. 139–151. [Online]. Available: https://doi.org/10.1007/978-3-031-86315-8_7
  9. [9]ENTSO-E, “Single intraday coupling (sidc) implementation,” https://www.entsoe.eu/network_codes/cacm/implementation/sidc/, 2026, accessed July 2026.
  10. [10]———, “Single Intraday Coupling (SIDC),” https://www.entsoe.eu/network_codes/cacm/implementation/sidc/, 2025, accessed: 2026-09-07.
  11. [11]EPEX-SPOT, “Trading at epex spotfebruary 2025,” 2025. [Online]. Available: epexspot.com/sites/default/files/2025-02/EPEXSPOTTradingBrochure2025February.pdf
  12. [12]H. Martin and S. Otterson, “German intraday electricity market analysis and modeling based on the limit order book,” in 2018 15th International Conference on the European Energy Market (EEM), 2018, pp. 1–6.DOI
  13. [13]S. Hagemann and C. Weber, “An empirical analysis of liquidity and its determinants in the German intraday market for electricity,” SSRN Electronic Journal, 2013.
  14. [14]C. Balardy, “An empirical analysis of the bid-ask spread in the continuous intraday trading of the german power market,” The Energy Journal, vol. 43, no. 3, pp. 229–256, 2022. [Online]. Available: https://www.jstor.org/stable/27393690DOI
  15. [15]P. Samuelson, “Proof that properly anticipated prices fluctuate randomly,” Ind. Manag. Rev., vol. 6, no. 0, pp. 41–49, 1965.
  16. [16]R. Aid, A. Cosso, and H. Pham, “Equilibrium price in intraday electricity markets,” Mathematical Finance, vol. 32, no. 2, pp. 517–554, April 2022. [Online]. Available: https://ideas.repec.org/a/bla/mathfi/v32y2022i2p517-554.html
  17. [17]K. Chatziandreou and S. Karbach, “Optimal execution in intraday energy markets under hawkes processes with transient impact,” Quantitative Finance, vol. 0, no. 0, pp. 1–27, 2026. [Online]. Available: https://doi.org/10.1080/14697688.2025.2597415 T. Deschatre and X. Warin, “A common shock model for multidimensional electricity intraday price modelling with application to battery valuation,” Quantitative Finance, vol. 24, 07 2023.
  18. [19]A. G. Hawkes, “Spectra of some self-exciting and mutually exciting point processes,” Biometrika, vol. 58, no. 1, pp. 83–90, 1971. [Online]. Available: http://www.jstor.org/stable/2334319DOI
  19. [20]C. G. Bowsher, “Modelling security market events in continuous time: Intensity based, multivariate point process models,” Journal of Econometrics, vol. 141, no. 2, pp. 876–912, 2007. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S030440760600251X
  20. [21]P. Embrechts, T. Liniger, and L. Lin, “Multivariate Hawkes processes: an application to financial data,” Journal of Applied Probability, vol. 48, no. 2, p. 367–378, 2011.DOI
  21. [22]K. Lee and B. K. Seo, “Marked hawkes process modeling of price dynamics and volatility estimation,” Journal of Empirical Finance, vol. 40, pp. 174–200, 2017. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0927539816300810DOI
  22. [23]J. Wu, O. G. Ward, J. Curley, and T. Zheng, “Markov-modulated hawkes processes for sporadic and bursty event occurrences,” 2021. [Online]. Available: https://arxiv.org/abs/1903.03223
  23. [24]M. Morariu-Patrichi and M. S. Pakkanen, “State-dependent hawkes processes and their application to limit order book modelling,” Quantitative Finance, vol. 22, no. 3, pp. 563–583, 2022. [Online]. Available: https://doi.org/10.1080/14697688.2021.1983199
  24. [25]J. Chen, N. Taylor, S. Yang, and Q. Han, “Hawkes processes in finance: market structure and impact,” The European Journal of Finance, vol. 28, no. 7, pp. 621–626, 2022. [Online]. Available: https://doi.org/10.1080/1351847X.2022.2060755
  25. [26]I. M. Toke and F. Pomponio, “Modelling trades-through in a limit order book using hawkes processes,” Economics - The Open-Access, Open-Assessment E-Journal (2007–2020), vol. 6, no. None, pp. 1–23, None 2012. [Online]. Available: https://ideas.repec.org/a/zbw/ifweej/201222.html
  26. [27]M. Kirchner and S. Vetter, “Hawkes model specification for limit order books,” The European Journal of Finance, vol. 28, no. 7, pp. 642–662, 2022. [Online]. Available: https://doi.org/10.1080/1351847X.2020.1784974
  27. [28]V. Filimonov and D. Sornette, “Quantifying reflexivity in financial markets: Toward a prediction of flash crashes,” Physical Review E, vol. 85, no. 5, May 2012. [Online]. Available: http://dx.doi.org/10.1103/PhysRevE.85.056108
  28. [29]S. J. Hardiman, N. Bercot, and J.-P. Bouchaud, “Critical reflexivity in financial markets: a hawkes process analysis,” The European Physical Journal B, vol. 86, no. 10, Oct. 2013. [Online]. Available: http://dx.doi.org/10.1140/epjb/e2013-40107-3
  29. [30]T. Jaisson and M. Rosenbaum, “Rough fractional diffusions as scaling limits of nearly unstable heavy tailed Hawkes processes,” The Annals of Applied Probability, vol. 26, no. 5, pp. 2860–2882, 2016. [Online]. Available: https://doi.org/10.1214/15-AAP1164
  30. [31]R. Cont and A. De Larrard, “Price dynamics in a markovian limit order market,” SIAM Journal on Financial Mathematics, vol. 4, no. 1, pp. 1–25, 2013. [Online]. Available: https://doi.org/10.1137/110856605
  31. [32]W. Huang, C.-A. Lehalle, and M. Rosenbaum, “Simulating and analyzing order book data: The queue-reactive model,” Journal of the American Statistical Association, vol. 110, no. 509, pp. 107–122, 2015. [Online]. Available: https://doi.org/10.1080/01621459.2014.982278
  32. [33]N. Graf von Luckner and R. Kiesel, “Modeling market order arrivals on the german intraday electricity market with the hawkes process,” Journal of Risk and Financial Management, vol. 14, no. 4, 2021. [Online]. Available: https://www.mdpi.com/1911-8074/14/4/161
  33. [34]K. Chatziandreou and S. Karbach, “Optimal execution in intraday energy markets under hawkes processes with transient impact,” 2025. [Online]. Available: https://arxiv.org/abs/2504.10282
  34. [35]A. Kramer and R. Kiesel, “Exogenous factors for order arrivals on the intraday electricity market,” Energy Economics, vol. 97, p. 105186, 2021. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0140988321000918
  35. [36]M. Narajewski and F. Ziel, “Estimation and simulation of the transaction arrival process in intraday electricity markets,” Energies, vol. 12, no. 23, 2019. [Online]. Available: https://www.mdpi.com/1996-1073/12/23/4518
  36. [37]T. Fabre and I. M. Toke, “High-frequency market manipulation detection with a markov-modulated hawkes process,” 2025. [Online]. Available: https://arxiv.org/abs/2502.04027
  37. [38]T. Kuppelwieser and D. Wozabal, “Liquidity costs on intraday power markets: Continuous trading versus auctions,” Energy Policy, vol. 154, p. 112299, 2021. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0301421521001683
  38. [39]P. Bergault and E. Cognéville, “Simulating and analyzing a sparse order book: an application to intraday electricity markets,” Quantitative Finance, vol. 25, no. 10, pp. 1599–1614, 2025. [Online]. Available: https://doi.org/10.1080/14697688.2025.2568693
  39. [40]A. Jhabli, T. AlSkaif, K. E. Bennin, B. Tekinerdoğan, A. Naumann, and J. M. E. Pennings, “Modelling regime shifts in continuous intraday electricity markets with state-dependent hawkes processes,” 2026. [Online]. Available: https://arxiv.org/abs/2610.08169
  40. [41]F. X. Diebold and K. Yilmaz, “Better to give than to receive: Predictive directional measurement of volatility spillovers,” International Journal of Forecasting, vol. 28, no. 1, pp. 57–66, 2012, special Section 1: The Predictability of Financial Markets Special Section 2: Credit Risk Modelling and Forecasting. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S016920701100032X
  41. [42]Y.-T. Chang, Y.-F. Gau, and C.-C. Hsu, “Liquidity spillover in foreign exchange markets,” Finance Research Letters, vol. 44, p. 102105, 2022. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S1544612321001860DOI
  42. [43]D. P. Son, B. R. Marshall, N. H. Nguyen, and N. Visaltanachoti, “Liquidity spillover between etfs and their constituents,” International Review of Economics & Finance, vol. 88, pp. 723–747, 2023. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S1059056023002198
  43. [44]M. Schneider, F. Lillo, and L. Pelizzon, “Modelling illiquidity spillovers with hawkes processes: an application to the sovereign bond market,” Quantitative Finance, vol. 18, no. 2, pp. 283–293, 2018. [Online]. Available: https://doi.org/10.1080/14697688.2017.1403155
  44. [45]E. Pindza and J. Mba, “Contagion dynamics in multi-asset cryptocurrency markets: A hawkes process and dcc-garch framework,” Asia-Pacific Financial Markets, pp. 1–22, 09 2026.
  45. [46]S. Bernstein, “Sur les fonctions absolument monotones,” Acta Mathematica, vol. 52, no. none, pp. 1 – 66, 1929. [Online]. Available: https://doi.org/10.1007/BF02592679

Paper details

vlnc:W_dt6ztye9
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Economics, Econometrics and Finance

Claude (Anthropic)

View statement
Looking for related papers…
Contents