betaFeedback

WorksPhysics and Astronomy

Constraining beyond the Standard Model nucleon isovector charges

Abstract

At the TeV scale, low-energy precision observations of neutron characteristics provide unique probes of novel physics. Precision studies of neutron decay observables are susceptible to beyond the Standard Model (BSM) tensor and scalar interactions, while the neutron electric dipole moment, dnd_n, also has high sensitivity to new BSM CP-violating interactions. To fully utilise the potential of future experimental neutron physics programs, matrix elements of appropriate low-energy effective operators within neutron states must be precisely calculated. We present results from the QCDSF/UKQCD/CSSM collaboration for the isovector charges gT, gAg_T,~g_A and gSg_S of the nucleon, ΣΣ and ΞΞ baryons using lattice QCD methods and the Feynman-Hellmann theorem. We use a flavour symmetry breaking method to systematically approach the physical quark mass using ensembles that span five lattice spacings and multiple volumes. We extend this existing flavour breaking expansion to also account for lattice spacing and finite volume effects in order to quantify all systematic uncertainties. Our final estimates of the nucleon isovector charges are gT = 1.010(21)stat(12)sys, gA=1.253(63)stat(41)sysg_T~=~1.010(21)_{\text{stat}}(12)_{\text{sys}},~g_A=1.253(63)_{\text{stat}}(41)_{\text{sys}} and gS = 1.08(21)stat(03)sysg_S~=~1.08(21)_{\text{stat}}(03)_{\text{sys}} renormalised, where appropriate, at μ=2 GeVμ=2~\text{GeV} in the MS‾\overline{\text{MS}} scheme.

Introduction

Historically nuclear and neutron beta decays have played an important role in determining the vector-axial (V-A) structure of weak interactions and in shaping the Standard Model (SM). However, more recently, neutron and nuclear β\beta-decays can also be used to probe the existence of beyond the Standard Model (BSM) tensor and scalar interactions. The interaction of the W boson with the neutron and proton during neutron β\beta-decay is proportional to the matrix element of flavour changing vector and axial-vector currents between the initial neutron state and final proton state, with coupling constants gA/gV=1.2756(13)g_A/g_V = 1.2756(13) [1]. It has been identified that the potential existence of BSM tensor and scalar couplings would provide additional contributions to neutron β\beta-decay [2]. These new BSM contributions are proportional to analogous matrix elements of flavour-changing tensor or scalar operators. To gain sensitivity to these effects the majority of previous and proposed neutron beta decay studies aim to determine one or more of the correlation coefficients included in the differential decay rate for a beam of polarised neutrons [2]:

d3ΓdEedΩedΩν∝peEe(E0−Ee)2ξ⋅(1+ape⋅pνEeEν+bmeEe+σn⋅[ApeEe+BpνEν]),(1)\frac{d^3\Gamma}{dE_e d\Omega_e d\Omega_\nu} \propto p_e E_e(E_0-E_e)^2 \xi\cdot\left(1+a\frac{\mathbf{p}_e\cdot\mathbf{p}_\nu}{E_e E_\nu}+b\frac{m_e}{E_e}+\sigma_n\cdot\left[A\frac{\mathbf{p}_e}{E_e}+B\frac{\mathbf{p}_\nu}{E_\nu}\right]\right), \tag*{(1)}

where σn\sigma_n is the neutron spin, pep_e is the momentum of the electron and pνp_\nu is the momentum of the neutrino with energies EeE_e and EνE_\nu, respectively, and E0E_0 is the end-point energy of the electron. In the SM, ξ=GF2Vud2(1+3λ2)\xi= G_F^2 V_{ud}^2(1+3\lambda^2), where λ=gA/gV\lambda= g_A/g_V is the ratio of the axial-vector and vector coupling constants and GFG_F is the Fermi constant. The neutron decay observables include, aa, the neutrino-electron correlation coefficient, bb, the Fierz interference term, AA, the beta asymmetry, and BB, the neutrino asymmetry. Within the SM, the correlation coefficients aa, AA and BB depend solely on the ratio of the axial-vector and vector coupling constants, λ=gA/gV\lambda= g_A/g_V. However the parameter, bb, is included to account for the case of the hypothetical scalar or tensor couplings in addition to the (V-A) interaction of the SM. Many experiments are underway worldwide with the aim to improve the precision of measurements of these neutron decay observables, two importantly being the neutrino asymmetry BB [3], and the Fierz interference term bb [4, 5]. The parameter bb has linear sensitivity to BSM physics through Eq. (2):

bBSM=21+3λ2[gSϵS−12λgTϵT]b^{\mathrm{BSM}} = \frac{2}{1+3\lambda^2}\left[g_S\epsilon_S-12\lambda g_T\epsilon_T\right]
≈0.34gSϵS−5.22gTϵT,(2)\approx0.34g_S\epsilon_S-5.22g_T\epsilon_T, \tag*{(2)}
bνBSM=21+3λ2[gSϵSλ−4λgTϵT(1+2λ)]b_\nu^{\mathrm{BSM}} = \frac{2}{1+3\lambda^2}\left[g_S\epsilon_S\lambda-4\lambda g_T\epsilon_T(1+2\lambda)\right]
≈0.44gSϵS−4.85gTϵT,(3)\approx0.44g_S\epsilon_S-4.85g_T\epsilon_T, \tag*{(3)}

where ϵT\epsilon_T and ϵS\epsilon_S are the new-physics effective couplings and gTg_T and gSg_S are the tensor and scalar nucleon isovector charges. Here bνBSMb_\nu^{\mathrm{BSM}} is a correction term to the neutrino asymmetry correlation coefficient, BB, and bBSMb^{\mathrm{BSM}} is an addition to the Fierz interference term bb in Eq. (1). Data taken at the Large Hadron Collider (LHC) is currently looking at probing scalar and tensor interactions at the ≲10−3\lesssim10^{-3} level [7]. However to fully assess the discovery potential of experiments at the 10−310^{-3} level it is crucial to identify existing constraints on new scalar and tensor operators.

Another quantity of interest is the neutron electric dipole moment (EDM), which is a measure for CP violation. In extensions of the Standard Model quarks acquire an EDM through the interaction of the photon with the tensor current [8]. The contribution of the quark EDMs, dqd_q, to the EDM of the neutron, dnd_n, is related to the quark tensor charges, gTqg_T^q, by [9, 10, 11]:

dn=dugTd+ddgTu+dsgTs.(4)d_n = d_u g_T^d + d_d g_T^u + d_s g_T^s. \tag*{(4)}

Here dud_u, ddd_d, dsd_s, are the new effective couplings which contain new CP violating interactions at the TeV scale. The current experimental data gives an upper limit on the neutron EDM of ∣dn∣<1.8×10−26e.cm\lvert d_n \rvert< 1.8 \times10^{-26} e.\mathrm{cm} [12]. In calculating the tensor charges and knowing a bound on dnd_n, we are able to constrain the couplings, dqd_q, and hence BSM theories.

In recent years there has been an increase in interest from lattice QCD collaborations in calculating the axial, scalar and tensor isovector charges due to their importance in interpreting the results of many experiments and phenomena mediated by weak interactions [13, 14, 15, 16, 17, 18, 19]. The QCDSF/UKQCD/CSSM collaborations have an ongoing program investigating various hadronic properties using the Feynman-Hellmann theorem [20, 21, 22, 23, 24, 25, 26, 27]. Here we extend this work to a dedicated study of the nucleon tensor, scalar and axial charges. We discuss a flavour symmetry breaking method to systematically approach the physical quark mass. We then extend this existing flavour breaking expansion to also account for lattice spacing and finite volume effects to quantify systemic uncertainties. Finally, we look at the potential impact of our results on measurements of the Fierz interference term and the neutron EDM.

Simulation Details

For this work we use gauge field configurations that have been generated with Nf=2+1N_f = 2 + 1 flavours of dynamical fermions, using the tree-level Symanzik improved gluon action and non-perturbatively O(a)O(a) improved Wilson fermions [28]. In our simulations, we have kept the bare average quark mass, mˉ=(mu+md+ms)/3\bar{m} = (m_u + m_d + m_s)/3, held fixed approximately at its physical value, while systematically varying the quark masses around the SU(3)SU(3) flavour symmetric point, mu=md=msm_u = m_d = m_s, to extrapolate results to the physical point [29]. We also have degenerate uu and dd quark masses, mu=md≡mlm_u = m_d \equiv m_l. The coverage of lattice spacings and pion masses is represented graphically in Figure 1.

Lattice ensembles plotted by pion mass and lattice spacing

Figure 1. Lattice ensembles that are used in this work characterised by pion mass, mπm_\pi, and lattice spacing, aa. The horizontal lines represent the physical pion and kaon masses and the continuum limit occurs as a→0a \to0.

Further information about these ensembles is presented in Table I and Appendix A, Table VII. We have five lattice spacings, a=0.082a = 0.082, 0.074, 0.068, 0.059, 0.052 fm [30], enabling an extrapolation to the continuum limit as well as three lattice volumes, 323×6432^3 \times64, 483×9648^3 \times96 and 643×9664^3 \times96, allowing an extension to the flavour-breaking expansion, which describes the quark mass-dependence of the matrix elements, to also account for lattice spacing and finite volume effects. We also use a bootstrapping resampling technique to compute all statistical uncertainties in our study.

In order to compare with existing results in the literature we use the renormalisation constants given in Table II. Table II summarises the renormalisation constants at each value of β\beta after chiral and continuum extrapolation across multiple masses with conversion from RI′^{\prime}-MOM to MS at μ=2\mu= 2 GeV. The renormalisation constants are calculated following the method in Ref. [32] and the results first appeared in Ref. [31].

β\betaZTMS‾Z_{T}^{\overline{\mathrm{MS}}}ZSMS‾Z_{S}^{\overline{\mathrm{MS}}}ZAZ_{A}
5.400.9637(23)0.7034(48)0.8671(77)
5.500.9644(49)0.7046(89)0.8693(38)
5.650.9684(54)0.7153(86)0.8754(19)
5.800.9945(11)0.6709(23)0.8913(49)
5.950.9980(42)0.6683(94)0.8983(43)

Table II. Renormalisation constants at each value of β\beta after chiral and continuum extrapolation across multiple masses with conversion from RI′^{\prime}-MOM to MS at μ=2\mu= 2 GeV [31, 32].

The Feynman-Hellmann Theorem

The Feynman-Hellmann (FH) theorem is used to calculate hadronic matrix elements in lattice QCD through modifications to the QCD Lagrangian. The expression for the FH theorem in the context of field theory is [20]:

∂EH,λ(p⃗)∂λ=12EH,λ(p⃗)⟨H,p⃗∣∂S∂λ∣H,p⃗⟩λ(5)\frac{\partial E_{H,\lambda}(\vec{p})}{\partial\lambda} = \frac{1}{2E_{H,\lambda}(\vec{p})}\left\langle H,\vec{p}\left|\frac{\partial S}{\partial\lambda}\right|H,\vec{p}\right\rangle_{\lambda} \tag*{(5)}

where SS is a modified action of our theory so that it depends on some parameter λ\lambda, S→S(λ)S \to S(\lambda) and EH,λ(p⃗)E_{H,\lambda}(\vec{p}) is the energy of a hadron state, HH. This result relates the derivative of the total energy to the expectation value of the derivative of the action with respect to the same parameter.

Application and implementation

Consider the following modification to the action of our theory:

S→S+λO.(6)S \to S + \lambda O. \tag*{(6)}

Then the FH theorem as shown in Eq. (5), provides a relationship between an energy shift and a matrix element of interest:

∂EH,λ(p⃗)∂λ∣λ=0=12EH(p⃗)⟨H,p⃗∣O∣H,p⃗⟩.(7)\left.\frac{\partial E_{H,\lambda}(\vec{p})}{\partial\lambda}\right|_{\lambda=0} = \frac{1}{2E_H(\vec{p})}\langle H,\vec{p}|O|H,\vec{p}\rangle. \tag*{(7)}

Importantly, the right-hand side is the standard matrix element of the operator OO inserted on the hadron, HH, in the absence of any background field. In lattice calculations, we modify the action in Eq. (6), then examine the behaviour of hadron energies as the parameter λ\lambda changes, and finally extract the above matrix element from the slope at λ=0\lambda= 0.

In order to calculate the tensor, axial and scalar charges of a baryon, the extra terms we add to the QCD action are:

ST→S+ζμνTλ∑xqˉ(x)σμνγ5q(x),(8)S_T \to S + \zeta_{\mu\nu}^{T}\lambda\sum_x \bar{q}(x)\sigma_{\mu\nu}\gamma_5q(x), \tag*{(8)}
SA→S+ζμAλ∑xqˉ(x)γμγ5q(x),(9)S_A \to S + \zeta_{\mu}^{A}\lambda\sum_x \bar{q}(x)\gamma_{\mu}\gamma_5q(x), \tag*{(9)}
SS→S+λ∑xqˉ(x)q(x),(10)S_S \to S + \lambda\sum_x \bar{q}(x)q(x), \tag*{(10)}

where we will take the case of each quark flavour, qq, separately, ζμνT\zeta_{\mu\nu}^{T}, ζμA\zeta_{\mu}^{A} are the phase factors and there are four choices of μ\mu and ν\nu. The phase factors chosen here are ζk4T=ζ4kT=1\zeta_{k4}^{T}=\zeta_{4k}^{T}=1, ζkjT=i\zeta_{kj}^{T}=i and ζkA=1\zeta_{k}^{A}=1, ζkA=i\zeta_{k}^{A}=i. The tensor, axial and scalar charges are related to the baryon matrix elements of the same operators:

⟨p⃗,s⃗∣Tμν∣p⃗,s⃗⟩=−i2m(sμpν−sνpμ)gTq,⟨p⃗,s⃗∣Aμ∣p⃗,s⃗⟩=2isμgAq,⟨p⃗,s⃗∣S∣p⃗,s⃗⟩=2mgSq,(11)\begin{aligned} \langle\vec{p},\vec{s}|T_{\mu\nu}|\vec{p},\vec{s}\rangle&= -i\frac{2}{m}(s_{\mu}p_{\nu}-s_{\nu}p_{\mu})g_{T}^{q},\\ \langle\vec{p},\vec{s}|A_{\mu}|\vec{p},\vec{s}\rangle&= 2is_{\mu}g_{A}^{q},\\ \langle\vec{p},\vec{s}|S|\vec{p},\vec{s}\rangle&= 2mg_{S}^{q}, \tag*{(11)} \end{aligned}

where Tμν=qˉσμνγ5qT_{\mu\nu}=\bar{q}\sigma_{\mu\nu}\gamma_5q, Aμ=qˉγμγ5qA_{\mu}=\bar{q}\gamma_{\mu}\gamma_5q and S=qˉqS=\bar{q}q [33]. In our simulations, we have chosen μ=3\mu=3, ν=4\nu=4 and p⃗=0\vec{p}=0:

⟨0⃗,s⃗∣T34∣0⃗,s⃗⟩=2mgTqσ,⟨0⃗,s⃗∣A3∣0⃗,s⃗⟩=2imgAqσ,⟨0⃗,s⃗∣S∣0⃗,s⃗⟩=2mgSq,(12)\begin{aligned} \langle\vec{0},\vec{s}|T_{34}|\vec{0},\vec{s}\rangle&= 2m g_{T}^{q}\sigma,\\ \langle\vec{0},\vec{s}|A_{3}|\vec{0},\vec{s}\rangle&= 2im g_{A}^{q}\sigma,\\ \langle\vec{0},\vec{s}|S|\vec{0},\vec{s}\rangle&= 2m g_{S}^{q}, \tag*{(12)} \end{aligned}

where, σ=±1\sigma= \pm1, is the spin of the baryon polarised in the zz direction. Hence the FH theorem in Eq. (7) for the tensor and axial charges gives:

∂Eλ+∂λ∣λ=0=gT,Aq,∂Eλ−∂λ∣λ=0=−gT,Aq,(13)\left.\frac{\partial E_{\lambda}^{+}}{\partial\lambda}\right|_{\lambda=0}=g_{T,A}^{q},\qquad\left.\frac{\partial E_{\lambda}^{-}}{\partial\lambda}\right|_{\lambda=0}=-g_{T,A}^{q}, \tag*{(13)}

where we have dropped the, HH, subscript as from now on we are only dealing with baryon states and E+/−E^{+/-} denotes the baryon energy with spin up/down in the zz direction in the presence of a tensor or axial background field (Eq. (8) and Eq. (9)) with strength λ\lambda. For small values of λ\lambda, the energy is therefore given by:

Eλ±=E0±λgT,Aq+O(λ3).(14)E_{\lambda}^{\pm}=E_0\pm\lambda g_{T,A}^{q}+\mathcal{O}(\lambda^3). \tag*{(14)}

We have related the change in energy of the hadron state to the spin contribution from the quark flavour qq. Alternatively, due to the combination of ±λ\pm\lambda, the spin-down state with positive λ\lambda is equivalent to the energy shift of the spin-up state with negative λ\lambda. For the scalar we simply have:

∂Eλ∂λ∣λ=0=gSq,Eλ=E0+λgSq+O(λ2).(15)\left.\frac{\partial E_\lambda}{\partial\lambda}\right|_{\lambda=0}=g_S^q, \qquad E_\lambda=E_0+\lambda g_S^q+\mathcal{O}(\lambda^2). \tag*{(15)}

Here the insertion is on the quark flavour qq. For example, we use the perturbed propagator for the dd-quark in the proton to get the dd-quark contribution to the nucleon isovector charge. The nucleon isovector charges are then given by the difference between the up and down quark contributions:

gT,A,Su−d=gT,A,Su−gT,A,Sd.(16)g_{T,A,S}^{u-d}=g_{T,A,S}^{u}-g_{T,A,S}^{d}. \tag*{(16)}

Here we only insert the operator into the propagators used in the quark-line connected contributions; there are no quark-line disconnected terms considered here as they cancel in the case u−du-d. To improve the precision of our results we can take advantage of the fact that we are only interested in energy changes due to changes in λ\lambda, specifically the change in energy around the point λ=0\lambda=0, with respect to the unperturbed energy. We consider two correlation functions, one calculated at λ=0\lambda=0 and the other at some finite value of λ\lambda. If we take the ratio of these two quantities, we find:

Cλ(t)C(t)=large te−(Eλ−E)tEEλ∣Aλ∣2∣A∣2.(17)\frac{C_\lambda(t)}{C(t)}\underset{\text{large }t}{=}e^{-(E_\lambda-E)t}\frac{E}{E_\lambda}\frac{|A_\lambda|^2}{|A|^2}. \tag*{(17)}

The exponential dependence on tt now contains the difference in energies between the unperturbed energy and the energy at some λ\lambda. CC and CλC_\lambda are both measured on the same configurations, so both will have correlated noise. Using this ratio to determine energy differences has the advantage that the noise will largely cancel, leaving to a more reliable energy shift. We can also constrain our fit function to pass through zero by construction as there is no difference in energies at λ=0\lambda=0.

The extraction of hadron matrix elements in lattice QCD demands careful attention to contamination from excited states. Excited-state contamination has an impact on the study of standard baryon three-point functions due to the presence of weak signal-to-noise behavior at large Euclidean times. Various techniques are used to address excited-state contamination, one of which is the variational method. The variational method has been widely successful in spectroscopy investigations [34, 35, 36, 37, 38, 39, 40], and has also found application in the analysis of hadronic matrix elements [41, 42, 43, 44, 45, 46]. Another popular method is the “two-exponential fit” and “summation” methods seen in Refs. [45, 46, 47, 48, 49, 50, 51]. A summary of these methods as well as a comparison between them can be seen in Ref. [52].

Since in this investigation hadron energies are extracted from two-point functions, control of excited state contamination in the Feynman-Hellmann analysis is simplified compared to standard three-point analyses. For example Figure 2 shows the effective energy shift for the ratio (Eq. (17)) divided by λ\lambda for the down quark at two different values of λ\lambda. In Figure 2 we see a plateau in the effective mass indicating a clear region where the ground state can be isolated.

Figure 2. Proton effective mass for the ratio (Eq. (17)) divided by λ\lambda, for the down quark at two different values of λ\lambda, calculated at a=0.068fma=0.068\mathrm{fm}, (κl,κs)=(0.122167,0.121682)(\kappa_l,\kappa_s)=(0.122167, 0.121682) for the tensor. The points have been offset slightly for clarity.

Weighted Averaging Method

The dependency of the fits on the time ranges used is a source of systematic uncertainty. To address these issues, we use a weighted averaging method on the fit results to limit the impact of the fit window selection. The weighted averaging method we use is a simplified variation of that outlined in Ref. [53] and has similarities to that proposed in Ref. [54]. We proceed by determining the energy shifts, ΔE=Eλ−E\Delta E=E_\lambda-E, by fitting the ratio of perturbed to unperturbed correlation functions using Eq. (17) for a variety of different Euclidean time fit windows. The largest time slice employed in each fit for each ensemble and operator is fixed to be the last time slice before the signal is lost due to statistical noise. For example, in Figure 2 this would be chosen to be tmax⁡≈17t_{\max}\approx17. The start of the fit range, tmin⁡t_{\min}, is varied between tmin⁡/a=6, 7, 8, 9, 10t_{\min}/a=6,\ 7,\ 8,\ 9,\ 10 for ensembles with β=5.40, 5.50, 5.65, 5.80, 5.95\beta=5.40,\ 5.50,\ 5.65,\ 5.80,\ 5.95, respectively and up to the largest value of tmin⁡t_{\min} such that no less than four time slices are used in a fit. By adjusting the minimum time slice of the fit range, tmin⁡t_{\min}, based on the lattice spacing of each ensemble, we are ensuring that each fit starts at an earlier scale. In the following we refer to the value of ΔE\Delta E for a single fit, ff, as EfE^f. Each fit result is then assigned a weight:

wf=pf(δEf)−2∑f′=1Npf′(δEf′)−2.(18)w^f=\frac{p_f(\delta E^f)^{-2}}{\sum_{f'=1}^{N}p_{f'}(\delta E^{f'})^{-2}}. \tag*{(18)}

where ff labels the choice of fit range specified by tmin⁡t_{\min} for a fixed tmax⁡t_{\max}, pf=Γ(Ndof/2,χ2/2)/Γ(Ndof/2)p_f = \Gamma(N_{\mathrm{dof}}/2, \chi^2/2)/\Gamma(N_{\mathrm{dof}}/2) is the p-value of the fit and δEf\delta E^f is the uncertainty in the energy shift, EfE^f, for fit ff. Taking a weighted average of the NN fit findings, EfE^f, provides the final estimate of the energy shift, E‾\overline{E}, and associated uncertainty δE‾\delta\overline{E},

E‾=∑f=1NwfEf,\overline{E} = \sum_{f=1}^{N} w^f E^f,
δstatE‾ 2=∑f=1Nwf(δEf)2,\delta_{\mathrm{stat}}\overline{E}^{\,2} = \sum_{f=1}^{N} w^f(\delta E^f)^2,
δsysE‾ 2=∑f=1Nwf(Ef−E‾)2,\delta_{\mathrm{sys}}\overline{E}^{\,2} = \sum_{f=1}^{N} w^f(E^f-\overline{E})^2,
δE‾=δstatE‾ 2+δsysE‾ 2.\delta\overline{E} = \sqrt{\delta_{\mathrm{stat}}\overline{E}^{\,2}+\delta_{\mathrm{sys}}\overline{E}^{\,2}}.

The total error δE‾\delta\overline{E} describes the combined statistical uncertainty on E‾\overline{E} plus the systematic uncertainty arising from the choice of fit range. The separating of this error into δstatE‾\delta_{\mathrm{stat}}\overline{E} and δsysE‾\delta_{\mathrm{sys}}\overline{E} only partially separates statistical and systematic uncertainties because δstatE‾\delta_{\mathrm{stat}}\overline{E} includes

statistical errors plus systematic uncertainties related to fluctuations among the δEf\delta E^f. The final estimate, E‾\overline{E}, provides an estimate of the energy of the hadron with reduced systematic bias arising from choice of fit window. Figure 3 shows the proton effective energy shift for the ratio (Eq. (17)), using the standard definition of an effective mass. The final estimate of the energy shift, E‾\overline{E}, when using the weighted averaging method is indicated by the red band. Figure 3 also includes a bar graph for the weights assigned to each fit value.

Figure 3. Proton effective mass for the ratio (Eq. (17)) for the up quark at λ=0.00005\lambda= 0.00005, for spin-down in the tensor (a) and the axial (b) with the scalar results show in (c), calculated at a=0.068fma = 0.068\mathrm{fm}, (κl,κs)=(0.122167,0.121682)(\kappa_l, \kappa_s) = (0.122167, 0.121682). The blue bar graph shows the weight of each fit result for the value of tmin⁡t_{\min}. The horizontal (red) band is the weighted average value, where the band includes the combined statistical and systematic uncertainty.

Determination of Matrix Elements

Feynman-Hellman Method

Now that we have a procedure for reliably determining the energy shifts, we are now in a position to determine ΔE\Delta E at multiple values of λ\lambda for a fixed ensemble and operator. In Figure 4 we plot the calculated proton energy shifts ΔE\Delta E for each value of λ\lambda for the a=0.068fma = 0.068\mathrm{fm} ensemble with (κl,κs)=(0.122167,0.121682)(\kappa_l, \kappa_s) = (0.122167, 0.121682). Figure 4(a) shows results for the tensor operator, while Figure 4(b) shows those for the axial operator. Now performing a linear fit to Eq. (14) and extracting the slope we obtain the following results, gTu=0.822(27)g_T^u = 0.822(27), gTd=−0.263(25)g_T^d = -0.263(25), gAu=0.814(56)g_A^u = 0.814(56) and gAd=−0.316(26)g_A^d = -0.316(26), with the tensor results, renormalised at μ=2\mu= 2 GeV in the MS scheme using the renormalisation factors given in Table II. Similarly for the scalar charge, in Figure 4(c) we perform a linear fit to Eq. (15) and by extracting the slope we find, gSu=4.03(29)g_S^u = 4.03(29) and gSd=3.04(17)g_S^d = 3.04(17), again renormalised at μ=2\mu= 2 GeV in the MS scheme. The above process has been repeated for all quark masses on each of the lattice spacings as well as for the Σ\Sigma and Ξ\Xi baryons. The results can been found in Appendix B, in Table VIII, Table IX, Table X.

Figure 4. Proton energy shift, ΔE=Eλ−E\Delta E = E_\lambda- E, for different parameter values, with a linear fit, where the red and blue bands show the statistical errors associated with the fitted parameters. Calculated at a=0.068fma = 0.068\mathrm{fm}, (κl,κs)=(0.122167,0.121682)(\kappa_l, \kappa_s) = (0.122167, 0.121682). Results for the tensor (a), axial (b) and scalar (c) operators

β\betaκl\kappa_lgTPug^u_{T_P}gTPdg^d_{T_P}gTΣug^u_{T_\Sigma}gTΣsg^s_{T_\Sigma}gTΞug^u_{T_\Xi}gTΞsg^s_{T_\Xi}
5.400.1199300.8851(55)−0.2020(43)-0.2020(43)0.8851(55)−0.2020(43)-0.2020(43)−0.2020(43)-0.2020(43)0.8851(55)
0.1199890.832(23)−0.222(10)-0.222(10)0.838(25)−0.216(18)-0.216(18)−0.222(18)-0.222(18)0.851(24)
0.1200480.849(24)−0.225(17)-0.225(17)0.845(25)−0.2145(83)-0.2145(83)−0.209(11)-0.209(11)0.870(11)
0.1200840.842(32)−0.209(25)-0.209(25)0.830(17)−0.2098(61)-0.2098(61)−0.2112(97)-0.2112(97)0.8760(83)
5.500.1209000.869(10)−0.2145(34)-0.2145(34)0.869(10)−0.2145(34)-0.2145(34)−0.2145(34)-0.2145(34)0.869(10)
0.1210400.810(38)−0.202(22)-0.202(22)0.809(25)−0.2163(98)-0.2163(98)−0.2042(83)-0.2042(83)0.8796(85)
0.1210950.800(27)−0.198(22)-0.198(22)0.822(17)−0.2159(66)-0.2159(66)−0.1947(59)-0.1947(59)0.8747(61)
5.500.1209500.8830(59)−0.2115(39)-0.2115(39)0.8830(59)−0.2115(39)-0.2115(39)−0.2115(39)-0.2115(39)0.8830(59)
0.1210400.863(11)−0.2066(46)-0.2066(46)0.8597(81)−0.2109(29)-0.2109(29)−0.2043(25)-0.2043(25)0.8815(63)
0.1210990.875(12)−0.2142(66)-0.2142(66)0.8692(70)−0.2222(14)-0.2222(14)−0.2103(24)-0.2103(24)0.8988(33)
5.650.1220050.8738(65)−0.2145(25)-0.2145(25)0.8738(65)−0.2145(25)-0.2145(25)−0.2145(25)-0.2145(25)0.8738(65)
0.1220780.8861(62)−0.2050(34)-0.2050(34)0.8812(54)−0.2124(26)-0.2124(26)−0.2030(26)-0.2030(26)0.9043(51)
0.1221300.815(34)−0.192(14)-0.192(14)0.811(17)−0.2104(76)-0.2104(76)−0.1989(95)-0.1989(95)0.8677(96)
0.1221670.8609(84)−0.2078(78)-0.2078(78)0.8513(62)−0.2206(19)-0.2206(19)−0.2008(41)-0.2008(41)0.9034(44)
0.1221970.868(71)−0.197(19)-0.197(19)0.821(72)−0.206(22)-0.206(22)−0.198(13)-0.198(13)0.913(58)
5.800.1228100.866(13)−0.2062(55)-0.2062(55)0.866(13)−0.2062(55)-0.2062(55)−0.2062(55)-0.2062(55)0.866(13)
0.1228800.8543(55)−0.2059(31)-0.2059(31)0.8503(53)−0.2062(54)-0.2062(54)−0.1994(34)-0.1994(34)0.8835(51)
0.1229400.848(11)−0.1963(57)-0.1963(57)0.8399(74)−0.2155(55)-0.2155(55)−0.1943(27)-0.1943(27)0.9043(50)
5.950.1234110.8649(47)−0.2058(28)-0.2058(28)0.8696(54)−0.2019(51)-0.2019(51)−0.2082(41)-0.2082(41)0.8517(92)
0.1234600.828(21)−0.197(15)-0.197(15)0.828(21)−0.197(15)-0.197(15)−0.197(15)-0.197(15)0.828(21)
0.1235230.8522(70)−0.2041(38)-0.2041(38)0.8502(61)−0.2112(23)-0.2112(23)−0.2005(27)-0.2005(27)0.8897(47)

Table VIII. Table of the bare results for the individual quark contributions to the overall tensor charge in the nucleon, Σ\Sigma and Ξ\Xi baryons.

β\betaκl\kappa_lgAPug^u_{A_P}gAPdg^d_{A_P}gAΣug^u_{A_\Sigma}gAΣsg^s_{A_\Sigma}gAΞug^u_{A_\Xi}gAΞsg^s_{A_\Xi}
5.400.1199301.025(24)−0.360(22)-0.360(22)1.025(24)−0.360(22)-0.360(22)−0.360(22)-0.360(22)1.025(24)
0.1199891.024(26)−0.344(20)-0.344(20)1.018(21)−0.333(16)-0.333(16)−0.324(18)-0.324(18)1.0421(15)
0.1200481.019(48)−0.322(32)-0.322(32)0.982(39)−0.338(21)-0.338(21)−0.312(15)-0.312(15)1.031(18)
0.1200841.028(35)−0.334(35)-0.334(35)0.983(53)−0.340(10)-0.340(10)−0.316(12)-0.316(12)1.065(10)
5.500.1209001.002(36)−0.306(58)-0.306(58)1.002(36)−0.306(58)-0.306(58)−0.306(58)-0.306(58)1.002(36)
0.1210400.959(74)−0.306(58)-0.306(58)0.943(49)−0.302(29)-0.302(29)−0.315(30)-0.315(30)1.035(24)
0.1210951.014(52)−0.399(43)-0.399(43)0.978(21)−0.3155(94)-0.3155(94)−0.2930(90)-0.2930(90)1.0445(72)
5.500.1209501.009(49)−0.298(24)-0.298(24)1.009(49)−0.298(24)-0.298(24)−0.298(24)-0.298(24)1.009(49)
0.1210400.835(91)−0.343(47)-0.343(47)0.913(45)−0.309(20)-0.309(20)−0.299(23)-0.299(23)1.017(28)
0.1210990.964(88)−0.341(41)-0.341(41)0.907(62)−0.292(30)-0.292(30)−0.306(21)-0.306(21)1.021(24)
5.650.1220050.950(48)−0.294(34)-0.294(34)0.950(48)−0.294(34)-0.294(34)−0.294(34)-0.294(34)0.950(48)
0.1220781.045(70)−0.322(26)-0.322(26)1.046(57)−0.317(19)-0.317(19)−0.295(18)-0.295(18)1.044(41)
0.1221300.973(91)−0.319(31)-0.319(31)0.979(91)−0.330(17)-0.330(17)−0.287(18)-0.287(18)1.070(24)
0.1221671.113(93)−0.287(59)-0.287(59)1.024(42)−0.310(17)-0.310(17)−0.282(13)-0.282(13)1.064(14)
0.1221971.049(59)−0.335(76)-0.335(76)1.020(42)−0.316(18)-0.316(18)−0.257(22)-0.257(22)1.107(16)
5.800.1228100.966(63)−0.223(35)-0.223(35)0.966(63)−0.223(35)-0.223(35)−0.223(35)-0.223(35)0.966(63)
0.1228801.042(56)−0.336(25)-0.336(25)1.032(46)−0.333(15)-0.333(15)−0.309(61)-0.309(61)1.041(21)
0.1229401.028(71)−0.326(35)-0.326(35)0.987(86)−0.295(38)-0.295(38)−0.296(25)-0.296(25)1.028(35)
5.950.1234110.975(33)−0.294(18)-0.294(18)0.967(40)−0.270(38)-0.270(38)−0.308(32)-0.308(32)0.941(56)
0.1234600.992(41)−0.308(22)-0.308(22)0.992(41)−0.308(22)-0.308(22)−0.308(22)-0.308(22)0.992(41)
0.1235231.035(94)−0.364(62)-0.364(62)1.004(63)−0.340(34)-0.340(34)−0.302(36)-0.302(36)0.960(56)

Table IX. Table of the bare results for the individual quark contributions to the overall axial charge in the nucleon, Σ\Sigma and Ξ\Xi baryons.

β\betaκl\kappa_lgSPug_{S_P}^{u}gSPdg_{S_P}^{d}gSΣug_{S_\Sigma}^{u}gSΣsg_{S_\Sigma}^{s}gSΞug_{S_\Xi}^{u}gSΞsg_{S_\Xi}^{s}
5.400.1199304.34(11)2.854(77)4.34(11)2.854(77)2.854(77)4.34(11)
0.1199894.32(14)2.987(92)4.03(12)2.695(46)2.683(71)4.181(66)
0.1200484.44(41)3.28(18)3.98(15)2.467(91)3.01(22)4.43(13)
0.1200844.29(64)2.62(47)4.04(20)2.702(42)2.633(90)4.282(50)
5.500.1209004.26(10)2.766(74)4.26(10)2.766(74)2.766(74)4.26(10)
0.1210404.93(43)3.41(24)4.35(25)2.642(60)2.73(10)4.201(70)
0.1210955.60(29)4.13(23)4.10(19)2.514(34)2.474(93)4.028(39)
5.500.1209504.209(16)2.81(11)4.209(16)2.81(11)2.81(11)4.209(16)
0.1210405.39(36)3.83(29)4.31(21)2.867(59)2.77(14)4.388(87)
0.1210995.50(52)4.46(41)5.44(59)2.937(68)3.09(26)4.611(94)
5.650.1220054.83(23)3.15(13)4.83(23)3.15(13)3.15(13)4.83(23)
0.1220784.78(20)3.163(19)4.16(13)2.705(51)2.82(13)4.53(10)
0.1221305.21(55)4.02(53)4.31(25)2.663(56)2.55(14)4.242(63)
0.1221675.73(39)4.15(22)4.01(23)2.759(46)2.61(13)4.344(70)
0.1221976.34(59)4.36(40)4.04(38)2.755(75)2.50(21)4.279(92)
5.800.1228104.47(27)2.89(16)4.47(27)2.89(16)2.89(16)4.47(27)
0.1228804.55(20)3.34(13)3.96(15)2.937(73)2.76(10)4.43(10)
0.1229405.26(68)4.15(73)4.20(33)2.872(70)2.61(23)4.384(90)
5.950.1234114.18(34)2.82(22)5.00(28)3.84(63)3.39(17)5.56(64)
0.1234605.21(27)3.38(17)5.21(27)3.38(17)3.38(17)5.21(27)
0.1235234.84(28)3.57(23)4.24(24)2.901(90)2.93(18)4.29(10)

Table X. Table of the bare results for the individual quark contributions to the overall scalar charge in the nucleon, Σ\Sigma and Ξ\Xi baryons.

Two-exponential fit method

Here we compare the FH method results to the popular “two-exponential fit” method using three point functions. This is undertaken by expanding the two-point and three-point functions to the second energy state and fitting to obtain the parameters of interest. The process for the two-exponential fit is to fit the two-point correlator over a sink time range in which the two-state initial fit assumption is justified. Then using these extracted parameters in the fit to the three-point correlator using a τ\tau range that also satisfies a two-state initial fit assumption. A detailed treatment of the two-exponential fit is given in, for example, Ref. [52].

Figure 5 shows a comparison of the result for gSug_S^u extracted using the FH method (red band) and the result using the two-exponential fit method (purple band). The red points come from a fixed λ\lambda value, similar to that shown in Figure 2, whereas the red band comes from performing a linear fit to Eq. (14) and extracting the slope. We can see that the results using the FH method is in excellent agreement with the standard three-point analysis.

Graph of $g_S^u$ extracted using the FH method and compared with the two-exponential fit method

Figure 5. Graph of gSug_S^u extracted using the FH method shown by the red points and shaded band compared with the result using the two-exponential fit method, calculated at a=0.068a = 0.068fm, (κl,κs)=(0.122167,0.121682)(\kappa_l, \kappa_s) = (0.122167, 0.121682). The black, orange and blue fits correspond to the two-exponential fit function constructed and the purple shaded area corresponds to the gSug_S^u parameter extracted from the two-exponential fit.

Now that we have the quark contributions for multiple lattice ensembles, in the next section we shall use a SU(3)SU(3) flavour symmetry breaking method to extrapolate results for the nucleon isovector charges to the physical quark mass.

Flavour Symmetry Breaking

The QCD interaction is flavour-blind, which means that the only distinction between quark flavours comes from the quark masses when we disregard the electromagnetic and weak interactions. The theory behind these interactions is easiest to understand when all three quark flavours share the same mass, as this allows us to use the full power of SU(3)SU(3) flavour symmetry. Here we have kept the bare quark mass, m‾=(mu+md+ms)/3\overline{m} = (m_u + m_d + m_s)/3, held fixed at its physical value, while systematically varying the individual quark masses around the SU(3)SU(3) flavour symmetric point, mu=md=msm_u = m_d = m_s, in order to constrain the extrapolation to the physical point. In this work we simulate with degenerate uu and dd quark masses mu=md≡mlm_u = m_d \equiv m_l, restricting ourselves to nf=2+1n_f = 2 + 1.

When SU(3)SU(3) is unbroken all octet baryon matrix elements of a given octet operator can be expressed in terms of just two couplings ff and dd. However, once SU(3)SU(3) is broken and we move away from the symmetric point we can construct quantities (Di,Fi)(D_i, F_i) which are equal at the symmetric point but differ in the case where the quark masses are different. The theory behind constructing these quantities is described in detail in Ref. [55] and is summarised below. The result of constructing these quantities leads to ‘fan’ plots, with slope parameters (ri,si)(r_i, s_i) relating them. Following the method in Ref. [55] we use the SU(3)SU(3) expansion to extrapolate the nucleon charges to the physical point.

In this work, we describe the quark mass dependence of the hadronic matrix elements by a perturbation in the quark masses about an SU(3)SU(3) symmetric point. This perturbation generates a polynomial expansion in the quark mass differences (i.e. the SU(3)SU(3) breaking parameter) and therefore appears distinct from a chiral formulation that generates nonanalytic behaviour (e.g. logarithms) in the vicinity of the 2- or 3-flavour chiral limits. However, it has been demonstrated in Ref. [56], that by expanding the logarithmic features about a fixed quark mass point (such as the chosen SU(3)SU(3) symmetric point), the infrared singularities reveal themselves in the high-order terms of the polynomial expansion — hence demonstrating that the group-theoretic expansion does encode the same physics that appears in the logarithms. A detailed numerical investigation exploring the numerical convergence from both limits goes beyond the present work. Here we assess the convergence of our expansion empirically, subject to the precision of our numerical results.

Mass dependence of amplitudes

In order to find the allowed mass dependence of the octet operators in hadrons we need the SU(3)SU(3) decomposition of the 8⊗8⊗88\otimes8\otimes8. SU(3)SU(3) singlet and octet coefficients are constructed through group theory and using a mass Taylor expansion, which can be seen in Ref. [55]. Here we summarise the coefficients in Table III.

These coefficients are used to construct equations which are linear in δml\delta m_l, where:

δml=ml−mˉ,(19)\delta m_l = m_l-\bar{m}, \tag*{(19)}

is the difference of the light quark mass to the SU(3)SU(3) symmetric point. Using the definitions in Table IV, we introduce the notation for the matrix element transition of B→B′B\to B^{\prime} as follows:

IndexBaryon (BB)Meson (FF)Current (JFJ^{F})
1nnK0K^{0}dˉγs\bar{d}\gamma s
2ppK+K^{+}uˉγs\bar{u}\gamma s
3Σ−\Sigma^{-}π−\pi^{-}dˉγu\bar{d}\gamma u
4Σ0\Sigma^{0}π0\pi^{0}12(uˉγu−dˉγd)\frac{1}{\sqrt{2}}(\bar{u}\gamma u-\bar{d}\gamma d)
5Λ0\Lambda^{0}η\eta16(uˉγu+dˉγd−2sˉγs)\frac{1}{\sqrt{6}}(\bar{u}\gamma u+\bar{d}\gamma d-2\bar{s}\gamma s)
6Σ+\Sigma^{+}π+\pi^{+}uˉγd\bar{u}\gamma d
7Ξ−\Xi^{-}K−K^{-}sˉγu\bar{s}\gamma u
8Ξ0\Xi^{0}Kˉ0\bar{K}^{0}sˉγd\bar{s}\gamma d
0η′\eta^{\prime}16(uˉγu+dˉγd+sˉγs)\frac{1}{\sqrt{6}}(\bar{u}\gamma u+\bar{d}\gamma d+\bar{s}\gamma s)

Table IV. The conventions for the generalised currents. We use the convention that current (i.e. operator) numbered by ii has the same effect as absorbing a meson with the index ii. Here γ\gamma represents an arbitrary Dirac matrix [55].

ABˉ′BF=⟨B′∣JF∣B⟩,(20)A^{F}_{\bar{B}^{\prime}B}=\langle B^{\prime}|J^{F}|B\rangle, \tag*{(20)}

where JFJ^{F} is the appropriate operator, or current, from Table IV and FF represents the flavour structure of the operator. From Table III we can now read off the expansions of the various matrix elements, where the ff and dd terms are independent of δml\delta m_l and the coefficients r1r_1, r2r_2, r3r_3 and s1s_1, s2s_2 are the leading order δml\delta m_l terms. For example if we look at the ΣˉπΣ\bar{\Sigma}\pi\Sigma term, we have to first order in δml\delta m_l:

IIBˉ′FB\bar{B}^{\prime}F Bffddr1r_1r2r_2r3r_3s1s_1s2s_2
0NˉηN\bar{N}\eta N3\sqrt{3}−1-111000000−1-1
0ΣˉηΣ\bar{\Sigma}\eta\Sigma00221100232\sqrt{3}0000
0ΛˉηΛ\bar{\Lambda}\eta\Lambda00−2-21122000000
0ΞˉηΞ\bar{\Xi}\eta\Xi−3-\sqrt{3}−1-11100000011
1NˉπN\bar{N}\pi N113\sqrt{3}0000−2-22200
1ΣˉπΣ\bar{\Sigma}\pi\Sigma2200000000−2-23\sqrt{3}
1ΞˉπΞ\bar{\Xi}\pi\Xi11−3-\sqrt{3}0000222200

Table III. Coefficients in the mass Taylor expansion of AˉB′BF\bar{A}^{F}_{B^{\prime}B} operator amplitudes: SU(3)SU(3) singlet and octet, for first class currents [55].

⟨Σ+∣Jπ0∣Σ+⟩=AΣˉΣπ=2f+(−2s1+3s2)δml.(21)\langle\Sigma^{+}|J^{\pi^{0}}|\Sigma^{+}\rangle=A^{\pi}_{\bar{\Sigma}\Sigma}=2f+(-2s_1+\sqrt{3}s_2)\delta m_l. \tag*{(21)}

Mass Dependence: `Fan Plots'

Since we hold the average quark mass, mˉ\bar{m}, fixed, while moving away from the symmetric point, we only need to

consider the non-singlet polynomials in the quark mass. In this sub-section quantities (Di,Fi)(D_i,F_i) are constructed which are equal at the symmetric point and differ in the case where the quark masses are different. We can then evaluate the violation of SU(3)SU(3) symmetry that emerges from the difference in ms−mlm_s-m_l.

The d-fan

Following Ref. [55], we construct the following combinations of matrix elements which have the same value, 2d2d, at the SU(3)dSU(3)_\mathrm{d} symmetric point:

D1≡−(ANˉηN+AΞˉηΞ)=2d−r1δml,D2≡AΣˉηΣ=2d+(r1+23r3)δml,D3≡−AΛˉηΛ=2d−(r1+2r2)δml,D4≡13(ANˉπN−AΞˉπΞ)=2d−43r3δml,D5≡AΣˉπΛ=2d+(r2−3r3)δml,D6≡16(ANˉKΣ+AΣˉKΞ)=2d+23r3δml,D7≡−(ANˉKΛ+AΛˉKΞ)=2d−2r2δml.(22)\begin{aligned} D_1&\equiv-(A_{\bar{N}\eta N}+A_{\bar{\Xi}\eta\Xi})=2d-r_1\delta m_l,\\ D_2&\equiv A_{\bar{\Sigma}\eta\Sigma}=2d+(r_1+2\sqrt{3}r_3)\delta m_l,\\ D_3&\equiv-A_{\bar{\Lambda}\eta\Lambda}=2d-(r_1+2r_2)\delta m_l,\\ D_4&\equiv\frac{1}{\sqrt{3}}(A_{\bar{N}\pi N}-A_{\bar{\Xi}\pi\Xi})=2d-\frac{4}{\sqrt{3}}r_3\delta m_l,\\ D_5&\equiv A_{\bar{\Sigma}\pi\Lambda}=2d+(r_2-\sqrt{3}r_3)\delta m_l,\\ D_6&\equiv\frac{1}{\sqrt{6}}(A_{\bar{N}K\Sigma}+A_{\bar{\Sigma}K\Xi})=2d+\frac{2}{\sqrt{3}}r_3\delta m_l,\\ D_7&\equiv-(A_{\bar{N}K\Lambda}+A_{\bar{\Lambda}K\Xi})=2d-2r_2\delta m_l. \tag*{(22)} \end{aligned}

By constructing these quantities the result is a ‘fan’ plot with seven lines and three slope parameters (r1,r2r_1,r_2 and r3r_3) constraining them. The slope parameters can be constrained by calculating octet baryon matrix elements on a set of ensembles with varying quark masses at fixed lattice spacing, such as those given in Table 1, and constructing the DiD_i’s. For the forward matrix elements considered here, these DiD_i’s can also be written as linear combinations of the different quark contributions to the baryon charges. For example, using Table IV we see:

β\betaaa (fm)Volume(κlight,κstrange)(\kappa_{\mathrm{light}},\kappa_{\mathrm{strange}})mπm_\pimKm_K (MeV)
5.400.082323×6432^3 \times64(0.119930, 0.119930)408408
(0.119989, 0.119812)366424
(0.120048, 0.119695)320440
(0.120084, 0.119623)290450
5.500.074323×6432^3 \times64(0.120900, 0.120900)468468 *
(0.121040, 0.120620)357505 *
(0.121095, 0.120512)315525 *
5.500.074323×6432^3 \times64(0.120950, 0.120950)403403
(0.121040, 0.120770)331435
(0.121099, 0.120653)270454
5.650.068483×9648^3 \times96(0.122005, 0.122005)412412
(0.122078, 0.121859)355441
(0.122130, 0.121756)302457
(0.122167, 0.121682)265474
643×9664^3 \times96(0.122197, 0.121623)220485
5.800.059483×9648^3 \times96(0.122810, 0.122810)427427
(0.122880, 0.122670)357456
(0.122940, 0.122551)280477
5.950.052483×9648^3 \times96(0.123411, 0.123558)468395
(0.123460, 0.123460)418418
(0.123523, 0.123334)347451

Table 1. Details of lattice ensembles used in this work. * indicates ensembles with a different value of mˉ\bar{m}, further from the physical mˉ\bar{m}. The uncertainty on the pseudoscalar masses is between 1-3 MeV.

D1=−(ANˉηN+AΞˉηΞ)=−(16(gpu+gpd)+16(gΞu−2gΞs)),(23)\begin{aligned} D_1&=-(A_{\bar{N}\eta N}+A_{\bar{\Xi}\eta\Xi})\\ &=-\left(\frac{1}{\sqrt{6}}(g_{p}^{u}+g_{p}^{d})+\frac{1}{\sqrt{6}}(g_{\Xi}^{u}-2g_{\Xi}^{s})\right), \tag*{(23)} \end{aligned}

where we introduce the notation gBqg_B^q to denote the quark, qq, contribution to the overall charge in the baryon, BB. In this work we only consider the flavour diagonal matrix terms, i.e. there are no transition terms. Therefore, only the diagonal DD terms, D1D_1, D2D_2 and D4D_4, are used. An ‘average D’ can also be constructed from the diagonal amplitudes:

XD=16(D1+2D2+3D4)=2d+O(δml2),(24)X_D = \frac{1}{6}(D_1 + 2D_2 + 3D_4) = 2d + O(\delta m_l^2), \tag*{(24)}

which is constant in δml\delta m_l up to terms O(δml2)O(\delta m_l^2). When constructing these fan plots it is useful to plot D~i=Di/XD\widetilde{D}_i = D_i/X_D to find the average fit to reduce statistical fluctuations.

The f-fan

Similarly another five quantities, FiF_i, can be constructed which all have the same value, 2f2f, at the SU(3)fSU(3)_f symmetric point:

F1≡13(AN‾ηN−AΞ‾ηΞ)=2f−23s2δml,F2≡(AN‾πN+AΞ‾πΞ)=2f+4s1δml,F3≡AΣ‾πΣ=2f+(−2s1+3s2)δml,F4≡12(AΣ‾KΞ−AN‾KΣ‾)=2f−2s1δml,F5≡13(AΛ‾KΞ−AN‾KΛ‾)=2f+23(3s1−s2)δml.(25)\begin{aligned} F_1 &\equiv\frac{1}{\sqrt{3}}(A_{\overline{N}\eta N} - A_{\overline{\Xi}\eta\Xi}) = 2f - \frac{2}{\sqrt{3}}s_2\delta m_l,\\ F_2 &\equiv(A_{\overline{N}\pi N} + A_{\overline{\Xi}\pi\Xi}) = 2f + 4s_1\delta m_l,\\ F_3 &\equiv A_{\overline{\Sigma}\pi\Sigma} = 2f + (-2s_1 + \sqrt{3}s_2)\delta m_l,\\ F_4 &\equiv\frac{1}{\sqrt{2}}(A_{\overline{\Sigma}K\Xi} - A_{\overline{N}K\overline{\Sigma}}) = 2f - 2s_1\delta m_l,\\ F_5 &\equiv\frac{1}{\sqrt{3}}(A_{\overline{\Lambda}K\Xi} - A_{\overline{N}K\overline{\Lambda}}) = 2f + \frac{2}{\sqrt{3}}(\sqrt{3}s_1 - s_2)\delta m_l. \tag*{(25)} \end{aligned}

Again, an ‘average F’ can be calculated through:

XF=16(3F1+F2+2F3)=2f+O(δml2).(26)X_F = \frac{1}{6}(3F_1 + F_2 + 2F_3) = 2f + O(\delta m_l^2). \tag*{(26)}

In this work, only the connected quark-line terms are computed. Quark-line disconnected terms only show up in the r1r_1 coefficient and r1disconr_1^{\mathrm{discon}} cancels in the case gT,A,S=gT,A,Sd−gT,A,Sdg_{T,A,S} = g^d_{T,A,S} - g^d_{T,A,S}. Unlike the dd-fan, the ff-fan to linear order, has no error from dropping the quark-line disconnected contributions, as none of the rir_i parameters appear in the ff-fan.

Fan Plot Results

Here we present results using the a=0.068a = 0.068fm ensemble. Results from other lattice spacings are similar. In Section VII, we will extend this method to include all ensembles and present the final results for gT,A,Sg_{T,A,S}.

The singlet quantities XDX_D and XFX_F are calculated using Eq. (24) and Eq. (26). In Figure 6 XDX_D and XFX_F are plotted against δml\delta m_l and fitted to a constant. Since in Section … constant fits to the a=0.068fma = 0.068\mathrm{fm} data are shown by the dashed lines in Figure 6. In Figure 7(a) we present the DD-‘fan’ plot which shows the δml\delta m_l dependence of the D~i=Di/XD\widetilde{D}_i = D_i/X_D for i=1i = 1, 2 and 4. Here the lines correspond to the linear in δml\delta m_l fits using Eq. (22). From these linear fits the slope parameters r~1=r1/XD\widetilde{r}_1 = r_1/X_D and r~3=r3/XD\widetilde{r}_3 = r_3/X_D are determined. It is interesting to note that these parameters also lead to a prediction for the flavour off-diagonal term for i=6i = 6, which is also shown. Similarly in Figure 7(b) we present the FF-‘fan’ plot for F~i=Fi/XF\widetilde{F}_i = F_i/X_F, i=1i = 1, 2 and 3, where the lines correspond to the linear fits using Eq. (25). Similarly, the parameters s~1=s1/XF\widetilde{s}_1 = s_1/X_F and s~2=s2/XF\widetilde{s}_2 = s_2/X_F are determined from the linear fits. Again, the corresponding off-diagonal terms for i=4i = 4, 5 are also predicted and plotted. By forming appropriate linear combinations, we reconstruct the matrix elements for an individual quark flavour in a particular hadron:

Figure 6. XDX_D and XFX_F for each δml\delta m_l for the a=0.068a = 0.068fm ensemble for the tensor matrix element. The dashed lines are constant fits and the black stars represent the physical point.

Figure 7. (a) The three fits D1D_1, D2D_2 and D4D_4 (b) The three fits F1F_1, F2F_2 and F3F_3 for the tensor. The vertical black dotted line represents the physical point. Results for the five ensembles at a=0.068a = 0.068fm ensemble. The flavour off-diagonal terms D6D_6, F4F_4 and F5F_5 are also predicted and plotted. Where some points have been offset slightly for clarity.

⟨p∣uˉΓu∣p⟩=22f+(32r1−2r3+2s1−32s2)δml,⟨p∣dˉΓd∣p⟩=2(f−3d)+(32r1+2r3−2s1−32s2)δml,(27)\begin{aligned} \langle p|\bar{u}\Gamma u|p\rangle&= 2\sqrt{2}f + \left(\sqrt{\frac{3}{2}}r_1-\sqrt{2}r_3+\sqrt{2}s_1-\sqrt{\frac{3}{2}}s_2\right)\delta m_l,\\ \langle p|\bar{d}\Gamma d|p\rangle&= \sqrt{2}(f-\sqrt{3}d) + \left(\sqrt{\frac{3}{2}}r_1+\sqrt{2}r_3-\sqrt{2}s_1-\sqrt{\frac{3}{2}}s_2\right)\delta m_l, \tag*{(27)} \end{aligned}

and hence the nucleon isovector charges can be determined:

gT,A,Su−d=⟨p∣uˉΓu∣p⟩−⟨p∣dˉΓd∣p⟩,(28)g_{T,A,S}^{u-d}=\langle p|\bar{u}\Gamma u|p\rangle-\langle p|\bar{d}\Gamma d|p\rangle, \tag*{(28)}

for Γ=σ34γ5\Gamma= \sigma_{34}\gamma_5, γ3γ5\gamma_3\gamma_5 and II. To obtain an extrapolation of gT,A,Sg_{T,A,S} to the physical point, we evaluate the expressions in Eq. (27) at δml→δml∗\delta m_l \to\delta m_l^* and substitute in the estimated values for ri=r~iXDr_i = \widetilde{r}_iX_D and si=s~iXFs_i = \widetilde{s}_iX_F. In order to quantify systemic uncertainties we will now extend this flavour breaking expansion method further.

Global Fits

The flavour breaking expansion described in Section VI only accounts for the quark mass-dependence of the matrix elements. However, in order to quantify systematic uncertainties, here we extend this method to also account for lattice spacing, finite volume effects and second order mass terms. As we are performing a global fit over all ensembles, we are now able to place constraints on the second-order mass terms, which means that all fits will now incorporate a term of order O(δml2)\mathcal{O}(\delta m_l^2). These fits also include corrections with respect to aa, a2a^2 and mπLm_\pi L. In order to perform a global fit across all masses we substitute the quantity δml\delta m_l from here on with:

δml→δml=mπ2−Xπ2Xπ2,(29)\delta m_l \to\delta m_l = \frac{m_\pi^2-X_\pi^2}{X_\pi^2}, \tag*{(29)}

where the pseudoscalar mass flavour singlet, Xπ2X_\pi^2, is given by:

Xπ2=2mK2+mπ23.(30)X_\pi^2=\frac{2m_K^2+m_\pi^2}{3}. \tag*{(30)}

By determining δml\delta m_l to now be dimensionless and given in terms of physical quantities we are now able to combine results from different lattice spacings. The fit used for the singlet quantities XDX_D and XFX_F are extended to [56]:

XD,F=XD,F∗(1+c113[fL(mπ)+2fL(mK)])+c2aX_{D,F}=X_{D,F}^*\left(1+c_1\frac{1}{3}[f_L(m_\pi)+2f_L(m_K)]\right)+c_2a
+c3δml2,(31){}+c_3\delta m_l^2, \tag*{(31)}

where we also consider an alternative O(a2)\mathcal{O}(a^2) lattice spacing dependence by replacing c2ac_2a with c2a2c_2a^2. The c1c_1 term estimates the finite size effects, where the leading meson-loop contribution has the functional form [57]:

fL(m)=(mXπ)2e−mLmL.(32)f_L(m)=\left(\frac{m}{X_\pi}\right)^2\frac{e^{-mL}}{\sqrt{mL}}. \tag*{(32)}

It is important to note that here finite size effects are only included in the singlet quantities XDX_D and XFX_F and not in the DD and FF fan plot fits as the finite size corrections to the flavour-breaking coefficients determined by fits to, e.g. D~i=Di/XD\widetilde{D}_i = D_i/X_D are expected to be sub-dominant compared to those in the corresponding singlet quantities. The fits used for the DD fan, D~i=Di/XD\widetilde{D}_i = D_i/X_D, are of the form:

D~1=1−2(r~1+b~1a)δml+d~1δml2,D~2=1+(r~1+b~1a)+23(r~3+b~3a)δml+d~2δml2,D~4=1−43(r~3+b~3a)δml+d~4δml2,(33)\begin{aligned} \widetilde{D}_1 &= 1-2(\widetilde{r}_1+\widetilde{b}_1a)\delta m_l+\widetilde{d}_1\delta m_l^2,\\ \widetilde{D}_2 &= 1+(\widetilde{r}_1+\widetilde{b}_1a)\\ &\quad+2\sqrt{3}(\widetilde{r}_3+\widetilde{b}_3a)\delta m_l+\widetilde{d}_2\delta m_l^2,\\ \widetilde{D}_4 &= 1-\frac{4}{\sqrt{3}}(\widetilde{r}_3+\widetilde{b}_3a)\delta m_l+\widetilde{d}_4\delta m_l^2, \tag*{(33)} \end{aligned}

and similarly for the FF fan, F~i=Fi/XF\widetilde{F}_i = F_i/X_F:

F~1=1−23(s~2+e~2a)δml+f~1δml2,F~2=1+4(s~1+e~1a)δml+f~2δml2,F~3=1+(−2(s~1+e~1a)+3(s~2+e~2a))δml+f~3δml2.(34)\begin{aligned} \widetilde{F}_1 &= 1-\frac{2}{\sqrt{3}}(\widetilde{s}_2+\widetilde{e}_2a)\delta m_l+\widetilde{f}_1\delta m_l^2,\\ \widetilde{F}_2 &= 1+4(\widetilde{s}_1+\widetilde{e}_1a)\delta m_l+\widetilde{f}_2\delta m_l^2,\\ \widetilde{F}_3 &= 1+(-2(\widetilde{s}_1+\widetilde{e}_1a)\\ &\quad+\sqrt{3}(\widetilde{s}_2+\widetilde{e}_2a))\delta m_l+\widetilde{f}_3\delta m_l^2. \tag*{(34)} \end{aligned}

The δml2\delta m_l^2 coefficients were computed for the EM form factors in [55]. A O(δml2)\mathcal{O}(\delta m_l^2) fit there had 12 amplitudes and 11 coefficients so there is just one constraint. However, here we only consider the diagonal amplitudes and therefore we do not have 12 amplitudes and hence they are unable to be constrained here [59]. Therefore they are replaced with one δml2\delta m_l^2 coefficient (d~i,f~i)(\widetilde{d}_i,\widetilde{f}_i) for each DiD_i and FiF_i.

Now we perform a combination of different fits summarised in Table V. Firstly, the fit is performed individually on XDX_D and XFX_F. An example of this is shown in Figure 8(a) and Figure 8(c). In Figure 8(a) we show XFX_F as a function of mπ2−Xπ2Xπ2\frac{m_\pi^2-X_\pi^2}{X_\pi^2} for ‘Fit 1’, which only includes the constant term, XF∗X_F^* and a δml2\delta m_l^2 term in Eq. (31), while Figure 8(c) shows XFX_F as a function of mπ2−Xπ2Xπ2\frac{m_\pi^2-X_\pi^2}{X_\pi^2} with the result from using Eq. (31) with all corrections included (‘Fit 4’). The extrapolated result for XDX_D and XFX_F are summarised in Table V taken in the limits a→0a \to0, mπL→∞m_\pi L \to\infty and mπm_\pi, mK→m_K \to physical masses. Similarly, fits are performed on the fan plots using Eq. (33) and Eq. (34). Figure 8(b) and Figure 8(d) shows the results when using ‘Fit 1’ and ‘Fit 4’, where it is important to mention that all data points are shifted in the limit a→0a \to0 in Figure 8(c)(Figure 8d). The slope results are then multiplied by the extrapolated results for XDX_D and XFX_F:

FitXDX_Dχ2/dof\chi^2/\mathit{dof}XFX_Fχ2/dof\chi^2/\mathit{dof}gTg_Tχ2/dof\chi^2/\mathit{dof}D-Fanχ2/dof\chi^2/\mathit{dof}F-Fan
1.δml2\delta m_l^20.515(43)1.880.6002(57)1.741.035(13)1.271.84
2.a, δml2a,\ \delta m_l^20.5251(81)1.870.610(10)1.741.000(27)0.761.24
3.a2, δml2a^2,\ \delta m_l^20.5211(59)1.860.608(69)1.741.016(18)0.721.22
4.a, δml2, mπLa,\ \delta m_l^2,\ m_\pi L0.5252(80)1.980.611(10)1.841.001(27)1.351.97
5.a2, δml2, mπLa^2,\ \delta m_l^2,\ m_\pi L0.5212(59)1.970.606(75)1.841.017(18)0.741.18
6.δml2, mπL\delta m_l^2,\ m_\pi L0.516(43)1.980.6005(50)1.831.034(13)0.781.21
FitXDX_Dχ2/dof\chi^2/\mathit{dof}XFX_Fχ2/dof\chi^2/\mathit{dof}gAg_Aχ2/dof\chi^2/\mathit{dof}D-Fanχ2/dof\chi^2/\mathit{dof}F-Fan
1.δml2\delta m_l^20.583(21)0.990.648(22)0.811.262(60)1.001.74
2.a, δml2a,\ \delta m_l^20.565(36)1.020.656(39)0.851.21(15)1.031.80
3.a2, δml2a^2,\ \delta m_l^20.572(26)1.020.651(28)0.851.231(95)1.021.80
4.a, δml2, mπLa,\ \delta m_l^2,\ m_\pi L0.563(36)1.080.654(39)0.901.21(15)0.931.64
5.a2, δml2, mπLa^2,\ \delta m_l^2,\ m_\pi L0.574(27)1.080.653(30)0.901.231(95)0.951.73
6.δml2, mπL\delta m_l^2,\ m_\pi L0.584(22)1.040.648(22)0.851.262(60)0.951.73
FitXDX_Dχ2/dof\chi^2/\mathit{dof}XFX_Fχ2/dof\chi^2/\mathit{dof}gSg_Sχ2/dof\chi^2/\mathit{dof}D-Fanχ2/dof\chi^2/\mathit{dof}F-Fan
1.δml2\delta m_l^2−0.610(53)-0.610(53)1.032.52(12)1.521.07(20)1.292.76
2.a, δml2a,\ \delta m_l^2−0.72(10)-0.72(10)0.982.58(15)1.571.12(50)1.302.87
3.a2, δml2a^2,\ \delta m_l^2−0.654(67)-0.654(67)0.992.55(13)1.571.09(31)1.302.89
4.a, δml2, mπLa,\ \delta m_l^2,\ m_\pi L−0.71(10)-0.71(10)1.042.59(17)1.671.11(50)1.072.85
5.a2, δml2, mπLa^2,\ \delta m_l^2,\ m_\pi L−0.655(66)-0.655(66)1.052.52(14)1.661.10(31)1.072.99
6.δml2, mπL\delta m_l^2,\ m_\pi L−0.608(54)-0.608(54)1.092.51(12)1.601.06(19)1.072.98

Table V. Table of results for each fit and the corresponding χ2/dof\chi^2/\mathit{dof}, renormalised, where appropriate, at μ=2\mu= 2 GeV in the MS scheme. The notation in the first column shows which corrections are included in Eq. (31), Eq. (33) and Eq. (34). For example Fit 4 includes all corrections aa, δml2\delta m_l^2 and mπLm_\pi L, while Fit 1 only includes an added δml2\delta m_l^2 term, i.e. c1=c2=bi=ei=0c_1 = c_2 = b_i = e_i = 0.

Figure 8. As an example of some fits we have for the tensor: (a) XFX_F results for each ensemble using Eq. (31) where c1=c2=0c_1 = c_2 = 0 (Fit 1), plotted against mπ2−Xπ2Xπ2\frac{m_\pi^2-X_\pi^2}{X_\pi^2}. (b) The three fits F1F_1, F2F_2 and F3F_3 using Eq. (34) with ei=0e_i = 0 (Fit 1). (c) XFX_F results using all corrections in Eq. (31) (Fit 4), plotted against mπ2−Xπ2Xπ2\frac{m_\pi^2-X_\pi^2}{X_\pi^2}. The black line is a fit to Eq. (31) in the limit a→0a \to0 and mπL→∞m_\pi L \to\infty. (d) The three fits F1F_1, F2F_2 and F3F_3 using Eq. (34), where once again the data points are shifted in the limit a→0a \to0. The black stars represent the physical point. Where some points have been offset slightly for clarity.

:::`

ri=(r~i+b~ia)XD,si=(s~i+e~ia)XF,r_i=(\tilde{r}_i+\tilde{b}_ia)X_D, \qquad s_i=(\tilde{s}_i+\tilde{e}_ia)X_F,
di=d~iXD,fi=f~iXF.(35)d_i=\tilde{d}_iX_D, \qquad f_i=\tilde{f}_iX_F. \tag*{(35)}

The resulting slope parameters rir_i, sis_i and the δml2\delta m_l^2 coefficients are then included in the reconstruction of the matrix elements in a particular hadron:

⟨p∣uˉΓu∣p⟩=22f+(32r1−2r3+2s1−32s2)δml∗+(−322d1+322d4+322f1+122f2)δml∗2,\langle p|\bar{u}\Gamma u|p\rangle=2\sqrt{2}f+\left(\sqrt{\frac{3}{2}}r_1-\sqrt{2}r_3+\sqrt{2}s_1-\sqrt{\frac{3}{2}}s_2\right)\delta m_l^*+\left(-\frac{\sqrt{3}}{2\sqrt{2}}d_1+\frac{\sqrt{3}}{2\sqrt{2}}d_4+\frac{3}{2\sqrt{2}}f_1+\frac{1}{2\sqrt{2}}f_2\right)\delta m_l^{*2},
⟨p∣dˉΓd∣p⟩=2(f−3d)+(32r1+2r3−2s1−32s2)δml∗+(−322d1−322d4+322f1−122f2)δml∗2,(36)\langle p|\bar{d}\Gamma d|p\rangle=2(f-\sqrt{3}d)+\left(\sqrt{\frac{3}{2}}r_1+\sqrt{2}r_3-\sqrt{2}s_1-\sqrt{\frac{3}{2}}s_2\right)\delta m_l^*+\left(-\frac{\sqrt{3}}{2\sqrt{2}}d_1-\frac{\sqrt{3}}{2\sqrt{2}}d_4+\frac{3}{2\sqrt{2}}f_1-\frac{1}{2\sqrt{2}}f_2\right)\delta m_l^{*2}, \tag*{(36)}

where d=XD∗/2d=X_D^*/2 and f=XF∗/2f=X_F^*/2. The final result for gT,A,Sg_{T,A,S} are then given in the limit, a→0a\to0, mπL→∞m_\pi L\to\infty and δml∗\delta m_l^* is the physical mass. The final results for XDX_D, XFX_F and gT,A,Sg_{T,A,S} for each fit are summarised are in Table V, together with the χreduced2\chi^2_{\mathrm{reduced}} for each fit.

Results

In order to combine these results we extend our weighted averaging method described in section IV. To do this we combine the χ2\chi^2 and degrees of freedom of XDX_D, XFX_F, D-fan and F-fan; enumerated by i=1,2,3,4i=1,2,3,4, respectively, in the following:

χf2=∑i=14χi2,Ndof,f=∑i=14Ndof,i,(37)\chi_f^2=\sum_{i=1}^{4}\chi_i^2,\qquad N_{\mathrm{dof},f}=\sum_{i=1}^{4}N_{\mathrm{dof},i}, \tag*{(37)}

where ff labels one of the six fit types. Each fit is then assigned a weight using the combined χf2\chi_f^2:

w~f=pf(δgT,A,Sf)−2∑f′=16pf′(δgT,A,Sf′)−2,(38)\tilde{w}^{f}=\frac{p_f(\delta g_{T,A,S}^{f})^{-2}}{\sum_{f'=1}^{6}p_{f'}(\delta g_{T,A,S}^{f'})^{-2}}, \tag*{(38)}

where pf=Γ(Ndof,f/2,χf2/2)/Γ(Ndof,f/2)p_f=\Gamma(N_{\mathrm{dof},f}/2,\chi_f^2/2)/\Gamma(N_{\mathrm{dof},f}/2) is the pp-value of the fit ff and δgT,A,Sf\delta g_{T,A,S}^{f} is the uncertainty in the nucleon isovector charges calculated using Eq. (36). Taking a weighted average of the six fit results, gT,A,Sfg_{T,A,S}^{f} provides a final estimate of the nucleon isovector charges, gT,A,Sg_{T,A,S}, and associated uncertainty:

gˉT,A,S=∑f=16wfgT,A,Sf,δstatgˉT,A,S2=∑f=16wf(δgT,A,Sf)2,δsysgˉT,A,S2=∑f=16wf(gT,A,Sf−gˉT,A,S)2,δgˉT,A,S=δstatgˉT,A,S2+δsysgˉT,A,S2.(39)\begin{aligned} \bar{g}_{T,A,S} &= \sum_{f=1}^{6} w^{f} g^{f}_{T,A,S},\\ \delta_{\mathrm{stat}}\bar{g}_{T,A,S}^{2} &= \sum_{f=1}^{6} w^{f}\left(\delta g^{f}_{T,A,S}\right)^{2},\\ \delta_{\mathrm{sys}}\bar{g}_{T,A,S}^{2} &= \sum_{f=1}^{6} w^{f}\left(g^{f}_{T,A,S}-\bar{g}_{T,A,S}\right)^{2},\\ \delta\bar{g}_{T,A,S} &= \sqrt{\delta_{\mathrm{stat}}\bar{g}_{T,A,S}^{2}+\delta_{\mathrm{sys}}\bar{g}_{T,A,S}^{2}}. \tag*{(39)} \end{aligned}

Figure 9 shows the results for each fit and their assigned weight. The final estimate of the nucleon isovector charges, gˉT,A,S\bar{g}_{T,A,S}, renormalised using the results given in Table II, at μ=2\mu= 2 GeV in the MS‾\overline{\mathrm{MS}}, are:

Weighted average results for $g_T$, $g_A$ and $g_S$

Figure 9. Weighted average results for gTg_T, gAg_A and gSg_S. The xx-axis displays the fit number as shown in Table V and the yy-axis displays the corresponding nucleon isovector charge results. The bar graph shows the weight of each fit result. The red band shows the final weighted average result using Eq. (39), with statistical and systematic errors combined in quadrature and the grey band is the FLAG Review result [58].

gT=1.010(21)stat(12)a(01)FV,(40)g_{T}=1.010(21)_{\mathrm{stat}}(12)_{a}(01)_{\mathrm{FV}}, \tag*{(40)}
gA=1.253(63)stat(41)a(03)FV,(41)g_{A}=1.253(63)_{\mathrm{stat}}(41)_{a}(03)_{\mathrm{FV}}, \tag*{(41)}
gS=1.08(21)stat(03)a(00)FV,(42)g_{S}=1.08(21)_{\mathrm{stat}}(03)_{a}(00)_{\mathrm{FV}}, \tag*{(42)}

where the systematic errors labelled as ‘a’ and ‘FV’ represent the difference in the central value obtained by incorporating a lattice spacing correction compared to without, and likewise for the finite volume correction. These final results, with statistical and systematic errors combined in quadrature, are shown by the red bands in Figure 9. We note our results for gTg_{T}, gAg_{A} and gSg_{S} are all comparable with the FLAG Review results [58], represented by the grey bands in Figure 9. Of particular note is that we have determined gTg_{T} to the ≈2%\approx2\% level. However, work is still needed in order reduce the uncertainties on, gSg_{S} and gAg_{A}, to understand it at the same level.

As a check on our method for combining the results from the six different fits given in Table V, we employ the widely used Akaike Information Criterion (AIC). Here results obtained from the various fits are weighted using the Akaike weights [60]:

wf=exp⁡(−12AICf(Γ))∑f′exp⁡(−12AICf′(Γ)).(43)w_{f}=\frac{\exp\left(-\frac{1}{2}\mathrm{AIC}_{f}(\Gamma)\right)}{\sum_{f'}\exp\left(-\frac{1}{2}\mathrm{AIC}_{f'}(\Gamma)\right)}. \tag*{(43)}

Akaike’s information criterion takes on the simple form for models with normally distributed errors:

AICf(Γ)=χf2+2pf,(44)\mathrm{AIC}_{f}(\Gamma)=\chi_{f}^{2}+2p_{f}, \tag*{(44)}

where χf2\chi_{f}^{2} is the same as that calculated in Eq. (37) and pfp_{f} is the number of parameters in each fit. As a result the AIC weight prefers the models with lower χ2\chi^{2} values, but penalises those with too many fit parameters. The above method was repeated using the AIC weights. This gives the following results for the nucleon isovector charges, gT=1.003(26)g_{T}=1.003(26), gA=1.261(68)g_{A}=1.261(68) and gS=1.07(23)g_{S}=1.07(23), where the errors have been added in quadrature. These results are in agreement with those in Eq. (40), 42 and 43.

Hyperons

Here we calculate flavour-diagonal matrix elements of hyperons using the same method. Ref. [61] demonstrates that isovector combinations of hyperon charges are relevant in searches for new physics through semileptonic hyperon decays. The calculated slope parameters rir_i, sis_i and the δml2\delta m_l^2 coefficients can also be used in the reconstruction of the matrix elements in a particular hyperon. The theory behind constructing these quantities is described in detail in Ref. [55] and is summarised in Appendix C. The results for the charges of the Σ+\Sigma^{+} and Ξ0\Xi^{0} baryons are summarised in Table VI.

TensorAxialScalar
gΣ+ug_{\Sigma^{+}}^{u}0.802(16)(12)0.884(25)(36)2.75(25)(08)
gΣ+dg_{\Sigma^{+}}^{d}−0.2379(10)(08)-0.2379(10)(08)−0.250(22)(30)-0.250(22)(30)1.86(16)(12)
gΞ0ug_{\Xi^{0}}^{u}−0.1929(77)(13)-0.1929(77)(13)−0.198(22)(15)-0.198(22)(15)1.52(11)(08)
gΞ0sg_{\Xi^{0}}^{s}0.968(25)(10)0.924(23)(12)2.58(24)(11)

Table 6. Summary of results for the tensor, axial and scalar charges of the Σ+\Sigma^{+} and Ξ0\Xi^{0} baryons. The first set of brackets contains the statistical uncertainty, whereas the second set of brackets contains the systematic uncertainty.

To properly exploit the increased experimental sensitivity to hypothetical tensor and scalar interactions, we require lattice-QCD estimates of the nucleon isovector charge, gTg_{T} at the level of 10–20% [6]. The results presented here are at the δgT/gT≈2%\delta g_{T}/g_{T}\approx2\% level. As the overall goal of this research is to support precision tests of the Standard Model, we have successfully demonstrated the validity of our approach. We can now look at the effect this has on phenomenology.

Impact of Lattice Results on Phenomenology

As discussed in Section I, it is expected that future neutron beta decay experiments will increase their sensitivity to BSM scalar and tensor interactions through improved measurements of the Fierz interference term, bb, as well as the neutrino asymmetry parameter, BB. In order to assess the full impact of these future experiments we have performed an analysis of the tensor charge gTg_{T} and gSg_{S}. Here we discuss existing constraints on new scalar ϵS\epsilon_{S} and tensor ϵT\epsilon_{T} couplings which arise from low-energy experiments. Finally, using the existing constraints on ϵS\epsilon_{S} and ϵT\epsilon_{T} as well as our calculated value for gTg_{T} and gSg_{S}, we determine the allowed regions in the ϵS−ϵT\epsilon_{S}-\epsilon_{T} plane.

Low-energy phenomenology of scalar and tensor interactions

0+ → 0+ transitions and scalar interactions

The most precise bound on the scalar coupling ϵS\epsilon_{S} comes from 0+→0+0^{+}\rightarrow0^{+} nuclear beta decay. The differential decay rate for 0+→0+0^{+} \to0^{+} nuclear beta decay has coefficient a0+a_{0+} and Fierz interference term b0+b_{0+} [6]:

a0+=1,(45)a_{0+} = 1, \tag*{(45)}
b0+=−2γgSϵS,γ=1−α2Z2,(46)b_{0+} = -2\gamma g_{S}\epsilon_{S}, \qquad\gamma= \sqrt{1-\alpha^{2}Z^{2}}, \tag*{(46)}

where ZZ is the atomic number of the daughter nucleus. We can see from Eq. (46) that b0+b_{0+} couples to the BSM scalar interaction. From a comparison of well known half-lives corrected by a phase-space factor, Hardy and Towner [62] found b0+=−0.0022(26)b_{0+}=-0.0022(26). This result was found using a number of daughter nuclei and averaging over the set. This can be converted to the following bound on the product of scalar charge and the new-physics effective scalar coupling:

−1.0×10−3<gSϵS<3.2×10−3(90% C.L.).(47)-1.0 \times10^{-3} < g_{S}\epsilon_{S} < 3.2 \times10^{-3} \qquad(90\%\, C.L.). \tag*{(47)}

This is the most precise bound on the scalar interactions from low-energy probes.

Radioactive Pion Decay and the Tensor Interaction

An analysis of radioactive pion decay π+→e+νeγ\pi^{+} \to e^{+}\nu_{e}\gamma is sensitive to the same tensor operator that can be investigated in beta decays. The experimental results from the PIBETA collaboration [63] put constraints on ϵT\epsilon_{T}:

−1.1×10−3<ϵT<1.36×10−3(90% C.L.).(48)-1.1 \times10^{-3} < \epsilon_{T} < 1.36 \times10^{-3} \qquad(90\%\, C.L.). \tag*{(48)}

Currently this is the most stringent constraint on the tensor coupling from low energy experiments. Using these constraints, as well Eq. 2 and Eq. 3, bounds can be put on the new scalar and tensor interactions at the 10−310^{-3} level. Following the work of Ref. [6], in Figure 10 we show the constraint on the ϵS−ϵT\epsilon_{S}-\epsilon_{T} plane.

Figure 10. Allowed regions in the ϵS−ϵT\epsilon_{S}-\epsilon_{T} plane, using the tensor and scalar charges as obtained in this work in Eq. (40) and Eq. (42), gS=1.08(21)stat(03)sysg_{S}=1.08(21)_{\mathrm{stat}}(03)_{\mathrm{sys}} and gT=1.010(21)stat(12)sysg_{T}=1.010(21)_{\mathrm{stat}}(12)_{\mathrm{sys}}. The green band is the existing band on b0+b_{0+} [6, 62].

The current best constraints on scalar and tensor interactions arise from 0+→0+0^{+} \to0^{+} nuclear beta decays and radioactive pion decay, which is shown by the green band [6, 62]. The neutron constraints are future projections at the 10−310^{-3} level, derived from Eq. 2 and Eq. 3, using the tensor and scalar charges as obtained in this work, shown by the red and blue bands in Figure 10. When accounting for uncertainties in these lattice QCD calculations, the boundaries on the bands in Figure 10 become wider and the bands take on a ‘bow-tie’ shape. However most of the constraining power is lost due to the large uncertainty in our value for gSg_{S}. In order to fully utilise the constraining power of 10−310^{-3} experiments, understanding the lattice-QCD estimates of the nucleon tensor and scalar charge at the level of 10%10\% is required [6]. We have successfully calculated the tensor charge at the ≈2%\approx2\% level and are able to fully utilise the constraining power future experiments.

Quark electric dipole moment

In this section we briefly discuss the impact our results have on constraining the quark EDM couplings using the current bound on the neutron EDM. Using the same method followed in Section VII we are able to constrain gTqg_{T}^{q}. We note that in this work we have only considered quark-line connected contributions, although other works have shown the disconnected contributions to be small at near-physical quark masses [64]. This is in line with expectations based on the fact that the tensor operator is a helicity-flip operator and hence disconnected contributions must vanish in the chiral limit. Using Eq. (36) we can calculate the up and down contributions to the nucleon tensor charge for each fit listed in Table V. Applying the weighted averaging method, the final estimates for, gTug_{T}^{u}, gTdg_{T}^{d} are:

gTu=0.812(21),(49)g_{T}^{u} = 0.812(21), \tag*{(49)}
gTd=−0.199(14).(50)g_{T}^{d} = -0.199(14). \tag*{(50)}

Using these results, Eq. (4) and the existing bound on the neutron EDM we are able to put bounds on the new effective couplings which contain new CP violating interactions. Figure 11 shows the 90% confidence level bounds in the du−ddd_u-d_d plane, assuming gTs=0g_T^s=0.

Figure 11. 90%90\% confidence level bounds on dud_{u} and ddd_{d} using lattice QCD estimates for gTug_{T}^{u} and gTdg_{T}^{d} and the current limit on the neutron EDM of ∣dn∣<1.8×10−26e.cm\lvert d_{n}\rvert< 1.8 \times10^{-26}e.\mathrm{cm} [12].

Conclusion

In this work we have presented results for the axial, tensor and scalar nucleon and hyperon charges using the Feynman-Hellmann theorem, as well as using a flavour symmetry breaking method to systematically approach the physical quark masses. We applied a weighted averaging method on the fit results, removing possible systematic uncertainties which arise from a bias in choosing the fit windows. In the flavour symmetry breaking method, symmetry constraints are automatically built in order-by-order in SU(3)SU(3) breaking. We extended the flavour symmetry breaking method in this analysis in order to have full coverage of aa, mπm_\pi and volume, meaning we have control over these systematics. Our final result of gT=1.010(21)stat(12)sysg_T=1.010(21)_{\mathrm{stat}}(12)_{\mathrm{sys}} is comparable to results present in the FLAG review. We have precisely calculated gTg_T to the ≈2%\approx2\% level, successfully reaching the goal of understanding gTg_T at the 10% level. However, work is still needed in order reduce the error on, gS=1.08(21)stat(03)sysg_S=1.08(21)_{\mathrm{stat}}(03)_{\mathrm{sys}} and gA=1.253(63)stat(41)sysg_A=1.253(63)_{\mathrm{stat}}(41)_{\mathrm{sys}}, to understand it at the same level. Future work is still needed with access to physical quark masses in order to better constrain the extrapolation to the physical point.

Acknowledgments

The numerical configuration generation (using the BQCD lattice QCD program [65]) and data analysis (using the Chroma software library [66]) was carried out on the DiRAC Blue Gene Q and Extreme Scaling Service (EPCC, Edinburgh, UK), the Data Intensive Service (Cambridge Service for Data-Driven Discovery, CSD3, Cambridge, UK), the Gauss Centre for Supercomputing (GCS) supercomputers JUQUEEN and JUWELS (John von Neumann Institute for Computing, NIC, Jülich, Germany) and resources provided by the North-German Supercomputer Alliance (HLRN), the National Computer Infrastructure (NCI National Facility in Canberra, Australia supported by the Australian Commonwealth Government) and the Phoenix HPC service (University of Adelaide). R.H. is supported in part by the STFC grant ST/P000630/1. P.E.L.R. is supported in part by the STFC grant ST/G00062X/1. G.S. is supported by DFG grant SCHI 179/8-1. R.D.Y. and J.M.Z. are supported by the ARC grants DP190100298 and DP220103098.

Lattice Ensemble Details

β\betaa(fm)a(\mathrm{fm})Volume(κlight,κstrange)(\kappa_{\mathrm{light}},\kappa_{\mathrm{strange}})#Trajectories
5.400.082323×6432^3 \times64(0.119930, 0.119930)1639
(0.119989, 0.119812)1005 (2)
(0.120048, 0.119695)1000 (3)
(0.120084, 0.119623)1345 (3)
5.500.074323×6432^3 \times64(0.120900, 0.120900)1754
(0.121040, 0.120620)1216
(0.121095, 0.120512)1849 (2)
5.500.074323×6432^3 \times64(0.120950, 0.120950)1614
(0.121040, 0.120770)1762
(0.121099, 0.120653)1003 (2)
5.650.068483×9648^3 \times96(0.122005, 0.122005)531
(0.122078, 0.121859)633
(0.122130, 0.121756)561 (2)
(0.122167, 0.121682)534 (2)
643×9664^3 \times96(0.122197, 0.121623)428 (3)
5.800.059483×9648^3 \times96(0.122810, 0.122810)298
(0.122880, 0.122670)458 (2)
(0.122940, 0.122551)522
5.950.052483×9648^3 \times96(0.123411, 0.123558)283 (2)
(0.123460, 0.123460)457
(0.123523, 0.123334)415

Table VII. TABLE VII. Details of the lattice ensembles used in this work: the same number of configurations was used for each λ\lambda value and operator. Measurements are separated by a single HMC trajectory with a randomised source location. The number in parentheses indicates the quantity of randomised sources used per configuration to generate additional samples.

Individual quark contributions to the overall charge in the baryon.

Here we present the bare results for the individual quark contributions to the overall tensor, axial and scalar charges in the nucleon, Σ\Sigma and Ξ\Xi baryons.

Hyperon Matrix elements

Reconstruction of the hyperon matrix elements as shown to first order in Ref. [55] and given to second order here:

⟨Σ+∣uˉΓu∣Σ+⟩=22f+(−22s1+6s2)δml+2f3δml2,⟨Σ+∣sˉΓs∣Σ+⟩=2(f−3d)+(−32r1−32r3−2s1+32s2)δml+(−32d2+12f3)δml2.(51)\begin{aligned} \langle\Sigma^{+} \vert\bar{u}\Gamma u \vert\Sigma^{+} \rangle&= 2\sqrt{2}f + \left(-2\sqrt{2}s_{1}+\sqrt{6}s_{2}\right)\delta m_{l}+\sqrt{2}f_{3}\delta m_{l}^{2},\\ \langle\Sigma^{+} \vert\bar{s}\Gamma s \vert\Sigma^{+} \rangle&= \sqrt{2}\left(f-\sqrt{3}d\right)+\left(-\sqrt{\frac{3}{2}}r_{1}-3\sqrt{2}r_{3}-\sqrt{2}s_{1}+\sqrt{\frac{3}{2}}s_{2}\right)\delta m_{l}\\ &\quad+\left(-\sqrt{\frac{3}{2}}d_{2}+\frac{1}{\sqrt{2}}f_{3}\right)\delta m_{l}^{2}. \tag*{(51)} \end{aligned}
⟨Ξ0∣uˉΓu∣Ξ0⟩=2(f−3d)+(22r3+22s1)δml+(−32d4+12f2)δml2.\langle\Xi^{0} \vert\bar{u}\Gamma u \vert\Xi^{0} \rangle=\sqrt{2}\left(f-\sqrt{3}d\right)+\left(2\sqrt{2}r_{3}+2\sqrt{2}s_{1}\right)\delta m_{l}+\left(-\sqrt{\frac{3}{2}}d_{4}+\frac{1}{\sqrt{2}}f_{2}\right)\delta m_{l}^{2}.
⟨Ξ0∣sˉΓs∣Ξ0⟩=22f+(−32r1+2r3+2s1−32s2)δml+(322d1−322d4+322f1+122f2)δml2.\langle\Xi^{0} \vert\bar{s}\Gamma s \vert\Xi^{0} \rangle=2\sqrt{2}f+\left(-\sqrt{\frac{3}{2}}r_{1}+\sqrt{2}r_{3}+\sqrt{2}s_{1}-\sqrt{\frac{3}{2}}s_{2}\right)\delta m_{l}+\left(\frac{\sqrt{3}}{2\sqrt{2}}d_{1}-\frac{\sqrt{3}}{2\sqrt{2}}d_{4}+\frac{3}{2\sqrt{2}}f_{1}+\frac{1}{2\sqrt{2}}f_{2}\right)\delta m_{l}^{2}.

References

References

  1. [1]P. Zyla et al. (Particle Data Group), Review of Particle Physics, PTЕP 2020, 083C01 (2020), and 2021 update.
  2. [2]J. D. Jackson, S. B. Treiman, and H. W. Wyld, Possible tests of time reversal invariance in beta decay, Phys. Rev. 106, 517 (1957).DOI
  3. [3]W. Wilburn, V. Cirigliano, A. Klein, M. Makela, P. McGaughey, C. Morris, J. Ramsey, A. Salas-Bacci, A. Saunders, L. Broussard, and A. Young, Measurement of the neutrino-spin correlation parameter β in neutron decay using ultracold neutrons, Rev. Mex. Fis. Suppl. 55(2), 119 (2009).
  4. [4]D. Počanić, R. Alarcon, L. Alonzi, S. Baeßler, S. Balascuta, J. Bowman, M. Bychkov, J. Byrne, J. Claro, V. Cianciolo, C. Crawford, E. Frlež, M. Gericke, G. Greene, R. Grzywacz, V. Gudkov, F. Hersman, A. Klein, J. Martin, S. Page, A. Palladino, S. Penttilä, K. Ryczakowski, W. Wilburn, A. Young, and G. Young, Nab: Measurement principles, apparatus and uncertainties, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 611, 211 (2009).
  5. [5]X. Sun et al., Improved limits on fierz interference using asymmetry measurements from the ultracold neutron asymmetry (ucna) experiment, Phys. Rev. C 101, 035503 (2020), arXiv:1911.05829 [nucl-ex].
  6. [6]T. Bhattacharya, V. Cirigliano, S. D. Cohen, A. Filippuzzi, M. Gonzalez-Alonso, M. L. Graesser, R. Gupta, and H.-W. Lin, Probing Novel Scalar and Tensor Interactions from (Ultra)Cold Neutrons to the LHC, Phys. Rev. D 85, 054512 (2012), arXiv:1110.6448 [hep-ph].
  7. [7]M. Aaboud, G. Aad, B. Abbott, et al., Search for a new heavy gauge-boson resonance decaying into a lepton and missing transverse momentum in 36 fb−1 of pp collisions at √s = 13 TeV with the ATLAS experiment, The European Physical Journal C 78, 401 (2018), arXiv:1706.04786 [hep-ex].
  8. [8]M. Pospelov and A. Ritz, Electric dipole moments as probes of new physics, Annals of Physics 318, 119 (2005), special Issue, arXiv:hep-ph/0504231.
  9. [9]J. R. Ellis and R. A. Flores, Implications of the strange spin of the nucleon for the neutron electric dipole moment in supersymmetric theories, Phys. Lett. B 377, 83 (1996), arXiv:hep-ph/9602211.
  10. [10]T. Bhattacharya, V. Cirigliano, S. D. Cohen, R. Gupta, A. Joseph, H.-W. Lin, and B. Yoon, Iso-scalar Tensor Charges of the Nucleon from Lattice QCD, Phys. Rev. D 92, 094511 (2015), arXiv:1506.06411 [hep-lat].
  11. [11]M. Pitschmann, C.-Y. Seng, C. D. Roberts, and S. M. Schmidt, Nucleon tensor charges and electric dipole moments, Phys. Rev. D 91, 074004 (2015), arXiv:1411.2052 [nucl-th].
  12. [12]C. Abel et al., Measurement of the permanent electric dipole moment of the neutron, Phys. Rev. Lett. 124, 081803 (2020), arXiv:2001.11966 [hep-ex].
  13. [13]R. Gupta, Y.-C. Jang, B. Yoon, H.-W. Lin, V. Cirigliano, and T. Bhattacharya ([Precision Neutron Decay Matrix Elements (PNDME) Collaboration]), Isovector charges of the nucleon from 2+1+1-flavor lattice QCD, Phys. Rev. D 98, 034503 (2018), arXiv:1806.09006 [hep-lat].
  14. [14]C. C. Chang et al., A per-cent-level determination of the nucleon axial coupling from quantum chromodynamics, Nature 558, 91 (2018), arXiv:1805.12130 [hep-lat].
  15. [15]J. Liang, Y.-B. Yang, T. Draper, M. Gong, and K.-F. Liu (χQCD Collaboration), Quark spins and anomalous ward identity, Phys. Rev. D 98, 074505 (2018), arXiv:1806.08366 [hep-ph].DOI
  16. [16]A. Walker-Loud, E. Berkowitz, D. Brantley, A. S. Gambhir, P. Vranas, C. Bouchard, M. Clark, C. C. Chang, N. Garron, B. Joo, T. Kurth, H. Monge-Camacho, A. Nicholson, C. Monahan, K. Orginos, and E. Rinaldi, Lattice QCD determination of the nucleon axial charge, PoS CD2018, 020 (2020), arXiv:1912.08321 [hep-lat].
  17. [17]T. Harris, G. von Hippel, P. Junnarkar, H. B. Meyer, K. Ottnad, J. Wilhelm, H. Wittig, and L. Wrang, Nucleon isovector charges and twist-2 matrix elements with N_f = 2 + 1 dynamical wilson quarks, Phys. Rev. D 100, 034513 (2019), arXiv:1905.01291 [hep-lat].DOI
  18. [18]G. S. Bali, S. Collins, B. Gläßle, M. Göckeler, J. Najjar, R. H. Rödl, A. Schäfer, R. W. Schiel, W. Söldner, and A. Sternbeck (QCDSF Collaboration), Nucleon isovector couplings from N_f = 2 lattice QCD, Phys. Rev. D 91, 054501 (2015), arXiv:1412.7336 [hep-lat].DOI
  19. [19]J. He, D. A. Brantley, C. C. Chang, I. Chernyshev, E. Berkowitz, D. Howarth, C. Körber, A. S. Meyer, H. Monge-Camacho, E. Rinaldi, C. Bouchard, M. A. Clark, A. S. Gambhir, C. J. Monahan, A. Nicholson, P. Vranas, and A. Walker-Loud, Detailed analysis of excited-state systematics in a lattice qcd calculation of g_A, Phys. Rev. C 105, 065203 (2022), arXiv:2104.05226 [hep-lat].DOI
  20. [20]A. J. Chambers, R. Horsley, Y. Nakamura, H. Perlt, D. Pleiter, P. E. L. Rakow, G. Schierholz, A. Schiller, H. St?uben, R. D. Young, and J. M. Zanotti, Feynman-hellmann approach to the spin structure of hadrons, Phys. Rev. D 90, 014510 (2014), arXiv:1405.3019 [hep-lat].DOI
  21. [21]A. Chambers, R. Horsley, Y. Nakamura, H. Perlt, P. Rakow, G. Schierholz, A. Schiller, and J. Zanotti, A novel approach to nonperturbative renormalization of singlet and nonsinglet lattice operators, Physics Letters B 740, 30 (2015), arXiv:1410.3078 [hep-lat].DOI
  22. [22]A. J. Chambers, R. Horsley, Y. Nakamura, H. Perlt, D. Pleiter, P. E. L. Rakow, G. Schierholz, A. Schiller, H. St?uben, R. D. Young, and J. M. Zanotti, Disconnected contributions to the spin of the nucleon, Phys. Rev. D 92, 114517 (2015), arXiv:1508.06856 [hep-lat].DOI
  23. [23]R. Horsley, Y. Nakamura, H. Perlt, D. Pleiter, P. E. L. Rakow, G. Schierholz, A. Schiller, H. St?uben, R. D. Young, and J. M. Zanotti, The strange quark contribution to the spin of the nucleon, PoS LATTICE2018, 119 (2018), arXiv:1901.04792 [hep-lat].arxiv.org/abs/1901.04792
  24. [24]R. Horsley, R. Millo, Y. Nakamura, H. Perlt, D. Pleiter, P. Rakow, G. Schierholz, A. Schiller, F. Winter, and J. Zanotti, A Lattice Study of the Glue in the Nucleon, Phys. Lett. B 714, 312 (2012), arXiv:1205.6410 [hep-lat].DOI
  25. [25]A. J. Chambers, R. Horsley, Y. Nakamura, H. Perlt, P. E. L. Rakow, G. Schierholz, A. Schiller, K. Somfleth, R. D. Young, and J. M. Zanotti, Nucleon Structure Functions from Operator Product Expansion on the Lattice, Phys. Rev. Lett. 118, 242001 (2017), arXiv:1703.01153 [hep-lat].DOI
  26. [26]K. U. Can et al., Lattice QCD evaluation of the Compton amplitude employing the Feynman-Hellmann theorem, Phys. Rev. D 102, 114505 (2020), arXiv:2007.01523 [hep-lat].DOI
  27. [27]A. Hannaford-Gunn, K. U. Can, R. Horsley, Y. Nakamura, H. Perlt, P. E. L. Rakow, G. Schierholz, H. St?uben, R. D. Young, and J. M. Zanotti (CSSM/QCDSF/UKQCD Collaborations), Generalized parton distributions from the off-forward Compton amplitude in lattice QCD, Phys. Rev. D 105, 014502 (2022), arXiv:2110.11532 [hep-lat].
  28. [28]N. Cundy, M. Göckeler, R. Horsley, T. Kaltenbrunner, A. D. Kennedy, Y. Nakamura, H. Perlt, D. Pleiter, P. E. L. Rakow, A. Schäfer, G. Schierholz, A. Schiller, H. St?uben, and J. M. Zanotti (QCDSF-UKQCD Collaboration), Nonperturbative improvement of stout-smeared three-flavor clover fermions, Phys. Rev. D 79, 094507 (2009), arXiv:0901.3302 [hep-lat].
  29. [29]W. Bietenholz, V. Bornyakov, N. Cundy, M. Göckeler, R. Horsley, A. Kennedy, W. Lockhart, Y. Nakamura, H. Perlt, D. Pleiter, P. Rakow, A. Schäfer, G. Schierholz, A. Schiller, H. St?uben, and J. Zanotti, Tuning the strange quark mass in lattice simulations, Physics Letters B 690, 436 (2010), arXiv:1003.1114 [hep-lat].DOI
  30. [30]V. Bornyakov, R. Horsley, R. J. Hudspith, Y. Nakamura, H. Perlt, D. Pleiter, P. E. L. Rakow, G. Schierholz, A. Schiller, H. St?uben, and J. M. Zanotti, Wilson flow and scale setting from lattice QCD (2015), arXiv:1508.05916 [hep-lat].arxiv.org/abs/1508.05916
  31. [31]J. Bickerton, Transverse properties of baryons using lattice quantum chromodynamics, The University of Adelaide https://hdl.handle.net/2440/129589 (2020).
  32. [32]M. Constantinou, R. Horsley, H. Panagopoulos, H. Perlt, P. E. L. Rakow, G. Schierholz, A. Schiller, and J. M. Zanotti, Renormalization of local quark-bilinear operators for N_f=3 flavors of stout link nonperturbative clover fermions, Phys. Rev. D 91, 014502 (2015), arXiv:1408.6047 [hep-lat].
  33. [33]S. Capitani, M. Göckeler, R. Horsley, H. Perlt, D. Peters, D. Pleiter, P. Rakow, G. Schierholz, A. Schiller, and P. Stephenson, Towards a lattice calculation of Δq and δq, Nuclear Physics B - Proceedings Supplements 79, 548 (1999), proceedings of the 7th International Workshop on Deep Inelastic Scattering and QCD, arXiv:hep-ph/9905573.DOI
  34. [34]ALPHA collaboration, B. Blossier, M. D. Morte, G. von Hippel, T. Mendes, and R. Sommer, On the generalized eigenvalue method for energies and matrix elements in lattice field theory, Journal of High Energy Physics 2009, 094 (2009), arXiv:0902.1265 [hep-lat].
  35. [35]G. P. Engel, C. B. Lang, M. Limmer, D. Mohler, and A. Schäfer (BGR [Bern-Graz-Regensburg] Collaboration), Meson and baryon spectrum forQCD with two light dynamical quarks, Phys. Rev. D 82, 034505 (2010), arXiv:1005.1748 [hep-lat].DOI
  36. [36]M. S. Mahbub, W. Kamleh, D. B. Leinweber, P. J. Moran, and A. G. Williams, Roper resonance in 2+1 flavorQCD, Physics Letters B 707, 389 (2012), arXiv:1011.5724 [hep-lat].DOI
  37. [37]A. J. Kiratidis, W. Kamleh, D. B. Leinweber, and B. J. Owen, Lattice baryon spectroscopy with multi-particle interpolators, Phys. Rev. D 91, 094509 (2015), arXiv:1501.07667 [hep-lat].DOI
  38. [38]M. S. Mahbub, W. Kamleh, D. B. Leinweber, P. J. Moran, and A. G. Williams, Structure and flow of the nucleon eigenstates in lattice QCD, Phys. Rev. D 87, 094506 (2013), arXiv:1302.2987 [hep-lat].DOI
  39. [39]B. J. Menadue, W. Kamleh, D. B. Leinweber, and M. S. Mahbub, Isolating the Λ(1405) in lattice QCD, Phys. Rev. Lett. 108, 112001 (2012), arXiv:1109.6716 [hep-lat].DOI
  40. [40]R. G. Edwards, J. J. Dudek, D. G. Richards, and S. J. Wallace, Excited state baryon spectroscopy from lattice QCD, Phys. Rev. D 84, 074508 (2011), arXiv:1104.5152 [hep-lat].DOI
  41. [41]B. J. Owen, W. Kamleh, D. B. Leinweber, M. S. Mahbub, and B. J. Menadue, Transition of ρ → πγ in lattice QCD, Phys. Rev. D 92, 034513 (2015), arXiv:1505.02876 [hep-lat].
  42. [42]J. M. M. Hall, W. Kamleh, D. B. Leinweber, B. J. Menadue, B. J. Owen, A. W. Thomas, and R. D. Young, Lattice QCD evidence that the Λ(1405) resonance is an antikaon-nucleon molecule, Phys. Rev. Lett. 114, 132002 (2015), arXiv:1411.3402 [hep-lat].pubmed.ncbi.nlm.nih.gov/25884122
  43. [43]B. J. Owen, W. Kamleh, D. B. Leinweber, M. S. Mahbub, and B. J. Menadue, Light meson form factors at near physical masses, Phys. Rev. D 91, 074503 (2015), arXiv:1501.02561 [hep-lat].DOI
  44. [44]B. J. Owen, J. Dragos, W. Kamleh, D. B. Leinweber, M. S. Mahbub, B. J. Menadue, and J. M. Zanotti, Variational approach to the calculation of g_A, Physics Letters B 723, 217 (2013), arXiv:1212.4668 [hep-lat].DOI
  45. [45]H.-W. Lin, S. D. Cohen, R. G. Edwards, and D. G. Richards, Lattice study of the n−P₁₁ transition form factors, Phys. Rev. D 78, 114508 (2008), arXiv:0803.3020 [hep-lat].
  46. [46]B. Yoon, R. Gupta, T. Bhattacharya, M. Engelhardt, J. Green, B. Joó, H.-W. Lin, J. Negele, K. Orginos, A. Pochinsky, D. Richards, S. Syritsyn, and F. Winter (Nucleon Matrix Elements (NME) Collaboration), Controlling excited-state contamination in nucleon matrix elements, Phys. Rev. D 93, 114506 (2016), arXiv:1602.07737 [hep-lat].DOI
  47. [47]S. Dinter, C. Alexandrou, M. Constantinou, V. Drach, K. Jansen, and D. B. Renner, Precision study of excited state effects in nucleon matrix elements, Physics Letters B 704, 89 (2011), arXiv:1108.1076 [hep-lat].DOI
  48. [48]T. Bhattacharya, S. D. Cohen, R. Gupta, A. Joseph, H.-W. Lin, and B. Yoon, Nucleon charges and electromagnetic form factors from 2+1+1-flavor lattice QCD, Phys. Rev. D 89, 094502 (2014), arXiv:1306.5435 [hep-lat].DOI
  49. [49]S. Capitani, M. Della Morte, D. Djukanovic, G. von Hippel, J. Hua, B. Jäger, B. Knippschild, H. B. Meyer, T. D. Rae, and H. Wittig, Nucleon electromagnetic form factors in two-flavor QCD, Phys. Rev. D 92, 054511 (2015), arXiv:1504.04628 [hep-lat].DOI
  50. [50]J. R. Green, J. W. Negele, A. V. Pochinsky, S. N. Syritsyn, M. Engelhardt, and S. Krieg, Nucleon electromagnetic form factors from lattice QCD using a nearly physical pion mass, Phys. Rev. D 90, 074507 (2014), arXiv:1404.4029 [hep-lat].DOI
  51. [51]S. Capitani, M. Della Morte, G. von Hippel, B. Jäger, A. Jüttner, B. Knippschild, H. B. Meyer, and H. Wittig, Nucleon axial charges and structure in lattice QCD with controlled errors, Phys. Rev. D 86, 074502 (2012), arXiv:1205.0180 [hep-lat].
  52. [52]J. Dragos, R. Horsley, W. Kamleh, D. B. Leinweber, Y. Nakamura, P. E. L. Rakow, G. Schierholz, R. D. Young, and J. M. Zanotti, Nucleon matrix elements using the variational method in lattice QCD, Phys. Rev. D 94, 074505 (2016), arXiv:1606.03195 [hep-lat].DOI
  53. [53]S. R. Beane, W. Detmold, R. Horsley, M. Illa, M. Jafry, D. J. Murphy, Y. Nakamura, H. Perlt, P. E. L. Rakow, G. Schierholz, P. E. Shanahan, H. Stüben, M. L. Wagman, F. Winter, R. D. Young, and J. M. Zanotti (NPLQCD and QCDSF collaborations), Charged multihadron systems in lattice QCD + QED, Phys. Rev. D 103, 054504 (2021), arXiv:2003.12130 [hep-lat].DOI
  54. [54]E. Rinaldi, S. Syritsyn, M. L. Wagman, M. I. Buchoff, C. Schroeder, and J. Wasem, Lattice QCD determination of neutron-antineutron matrix elements with physical quark masses, Phys. Rev. D 99, 074510 (2019), arXiv:1901.07519 [hep-lat].DOI
  55. [55]J. M. Bickerton, R. Horsley, Y. Nakamura, H. Perlt, D. Pleiter, P. E. L. Rakow, G. Schierholz, H. Stüben, R. D. Young, and J. M. Zanotti, Patterns of flavor symmetry breaking in hadron matrix elements involving u, d, and s quarks, Physical Review D 100, 101103/phys-revd.100.114516 (2019), arXiv:1909.02521 [hep-lat].DOI
  56. [56]W. Bietenholz, V. Bornyakov, M. Göckeler, R. Horsley, W. G. Lockhart, Y. Nakamura, H. Perlt, D. Pleiter, P. E. L. Rakow, G. Schierholz, A. Schiller, T. Streuer, H. Stüben, F. Winter, and J. M. Zanotti (QCDSF-UKQCD Collaboration), Flavor blindness and patterns of flavor symmetry breaking in lattice simulations of up, down, and strange quarks, Phys. Rev. D 84, 054509 (2011), arXiv:1102.5300 [hep-lat].DOI
  57. [57]S. R. Beane and M. J. Savage, Baryon axial charge in a finite volume, Phys. Rev. D 70, 074029 (2004), arXiv:hep-ph/0404314.
  58. [58]Y. Aoki, T. Blum, G. Colangelo, S. Collins, M. Della Morte, P. Dimopoulos, S. Dürr, X. Feng, H. Fukaya, M. Golterman, and et al., Flag review 2021 (2021), arXiv:2111.09849 [hep-lat].DOI
  59. [59]J. Bickerton, A. Cooke, R. Horsley, Y. Nakamura, H. Perlt, D. Pleiter, P. Rakow, G. Schierholz, H. Stüben, R. Young, and J. Zanotti, Patterns of flavour symmetry breaking in hadron matrix elements involving u, d and s quarks, PoS LATTICE2021, 490 (2022), arXiv:2112.0445.DOI
  60. [60]H. Akaike, On the likelihood of a time series model, Journal of the Royal Statistical Society. Series D (The Statistician) 27, 217 (1978).
  61. [61]H.-M. Chang, M. González-Alonso, and J. Martin Camalich, Nonstandard Semileptonic Hyperon Decays, Phys. Rev. Lett. 114, 161802 (2015), arXiv:1412.8484 [hep-ph].pubmed.ncbi.nlm.nih.gov/25955047
  62. [62]J. C. Hardy and I. S. Towner, Superallowed 0⁺ → 0⁺ nuclear β decays: A new survey with precision tests of the conserved vector current hypothesis and the standard model, Phys. Rev. C 79, 055502 (2009), arXiv:0812.1202 [nucl-ex].DOI
  63. [63]M. Bychkov, D. Počanić, B. A. VanDevender, V. A. Baranov, W. Bertl, et al., New precise measurement of the pion weak form factors in π⁺ → e⁺νγ decay, Phys. Rev. Lett. 103, 051802 (2009), arXiv:0804.1815 [hep-ex].DOI
  64. [64]R. Gupta, B. Yoon, T. Bhattacharya, V. Cirigliano, Y.-C. Jang, and H.-W. Lin (PNDME Collaboration), Flavor diagonal tensor charges of the nucleon from (2+1+1)-flavor lattice QCD, Phys. Rev. D 98, 091501 (2018), arXiv:1808.07597 [hep-lat].DOI
  65. [65]T. Haar, Y. Nakamura, and H. Stüben, An update on the bqcd hybrid monte carlo program, EPJ Web of Conferences 175 (2017), arXiv:0902.0885 [quant-ph].DOI
  66. [66]R. G. Edwards and B. Joo, The chroma software system for lattice QCD, Nuclear Physics B - Proceedings Supplements 140, 832 (2005), arXiv:hep-lat/0409003.DOI

Paper details

vlnc:W_dvcqaezd
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents