WorksPhysics and Astronomy
Evidence for quasi-two-dimensional superconductivity in infinite-layer nickelates
Abstract
After being expected as a promising analogue to cuprates for decades, superconductivity was recently discovered in infinite-layer nickelates, providing new opportunities to explore mechanisms of high-temperature superconductivity. However, in sharp contrast to the single-band quasi-two-dimensional superconductivity in cuprates, nickelates exhibit a multi-band electronic structure and an unexpected isotropic superconductivity as reported recently, which challenges the cuprate-like picture in nickelates. Here, we show the superconductivity in nickelates is actually anisotropic and quasi-two-dimensional in nature, as that in cuprates. By synthesizing high-quality lanthanide nickelate films with enhanced crystallinity and superconductivity ( = 18.8 K, = 16.5 K), strong anisotropic magnetotransport behaviors have been observed. The quasi-two-dimensional nature is further confirmed by the existence of a cusp-like peak of the angle-dependent , and a Berezinskii-Kosterlitz-Thouless transition near . Our work thus suggests a quasi-two-dimensional superconductivity in infinite-layer nickelates, implying a single-3-band cuprate-like picture may remain valid in these compounds.
Great amounts of efforts have been made to seek for high-temperature superconductivity (HTSC) beyond cuprates to help understanding the elusive pairing mechanisms[17]. Infinite-layer nickelates have long been considered as a promising candidate owing to the same layered square-planar crystal structure and electron counts as cuprates[2]. Indeed, superconductivity has been realized in rare-earth nickelates recently[1, 18, 19, 20, 21], which provides a new platform for understanding the physics of HTSC.
As is known, cuprates exhibit anisotropic quasi-two-dimensional (quasi-2D) superconductivity due to their layered structure and quasi-2D electronic structure[3, 4], and recent experiments show that HTSC can even exist in monolayer cuprate membranes[22]. As for nickelates, they host many electronic features distinctly from cuprates even though sharing the similar layered structures[5, 6]. For example, in contrast to the single Cu- orbital in cuprates[3], infinite-layer nickelates possess multiband Fermi surfaces with quasi-2D hole pockets derived from Ni- orbitals, and one or two three-dimensional (3D) electron pockets mainly from rare-earth-5d orbitals depending on the doping level (Figure 1a)[5, 6, 12, 13]. Some experimental observations, like the metallic ground states[1, 18, 19, 23] and the missing of long-range magnetic orders[24, 25, 26], are proposed to be related to such multi-orbital features[5, 6, 7, 8, 9, 10, 11, 12, 13, 14]. Moreover, superconductivity in nickelates displays strikingly unexpected 3D isotropic behavior as reported by recent magnetotransport measurements[15, 16], which challenges the cuprate-like single-band picture in nickelates[5, 27, 28]. As such, whether nickelates are ideally analogous to cuprates is still a question under hot debate and the clarification of above puzzles will greatly contribute to the understanding of superconductivity in infinitelayer nickelates.

Figure 1. Structural and transport characterizations of thin film. a, Schematic drawing of the Fermi surface of infinite-layer nickelates, showing quasi-two-dimensional hole pockets derived from - orbitals, and three-dimensional electron pockets mainly from rare-earth- orbitals. b, Cross-sectional high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) image of a 20-u.c.-thick thin film, demonstrating a uniform and defect-free infinite-layer phase. c, Temperature-dependent resistivity of , showing a representative and of 18.8 K and 16.5 K (bottom-right inset), respectively. The top-left inset shows the crystal structure of infinite-layer lanthanide nickelates,
Here, we report the synthesis of thin films on substrates with improved crystalline quality and enhanced superconductivity by reactive molecular beam epitaxy (MBE). Transport measurements show an anisotropic upper critical field , a cusp-like peak of angle-dependent under external magnetic field, and a Berezinskii–Kosterlitz–Thouless transition (BKT transition) near . All these experimental observations suggest the single-band quasi-2D nature of superconductivity in nickelates, similar to cuprates.
It is well known that the synthesis of high-quality superconducting infinite-layer nickelates are extremely challenging, and all growth and reduction parameters require careful optimizations[1, 23, 29, 30]. Using reactive MBE, we synthesize high-quality lanthanide nickelate films for this work since they have lower lattice mismatch with substrates (1.25%) compared with neodymium- and praseodymium-based counterparts[23, 31]. Reflection high-energy electron diffraction (RHEED) and x-ray diffraction (XRD) characterizations confirm the high crystalline quality of the as-grown films and final reduced infinite-layer films (Extended Data Figure 1). More importantly, the cross-sectional scanning transmission electron microscopy (STEM) shows no signature of Ruddlesden-Popper stacking faults (Figure 1b), a common defect observed in infinite-layer nickelates[16, 18, 19, 30]. Meanwhile, sharp interfaces without obvious cation intermixing can be ascertained through the atomic-resolved energy-dispersive x-ray spectroscopy (EDS) maps (Extended Data Fig. 2d). Temperature-dependent resistivity measurements on these samples reveal a greatly enhanced superconductivity compared to other infinite-layer nickelates grown on substrates[18, 19, 23, 31], showing a superconducting transition beginning at K and hitting zero-resistance at K (Figure 1c), providing a clean system to explore inherent properties in these compounds.

Extended Data Figure 1. Additional structural characterization of nickelate thin films. a, RHEED patterns along (upper panel) and (lower panel) azimuthal directions taken after the deposition of 20-u.c.-thick perovskite film. b, Reciprocal space map of a 20-u.c.-thick thin film around the (103) diffraction peak of the SrTiO substrate. The dashed line indicates the nickelate film is fully in-plane constrained to the substrate. c, - x-ray diffraction spectrum of the same nickelate film in (b). Asterisks denote the diffraction peaks coming from the SrTiO substrate.
consisting of layers separated by rare-earth cations.
Systematic magnetotransport measurements were performed under external magnetic fields perpendicular () and parallel () to the plane down to 4 K (Fig. 2a, b). Clearly, the nickelate films display highly anisotropic response to different magnetic field orientations, in sharp contrast to the isotropic behavior reported previously[15, 16]. Specifically, in our experiments, superconductivity is robust against the field strength up to 12 T for both field orientations, but shows significantly broader transition width for than as the field strength increases. This anisotropic broadening effect of the superconducting transition width is consistent with the field-orientation-dependent vortex motions (see Methods for details).

Figure 2. Magnetotransport measurements for . a-b, Resistivity of thin film under magnetic fields along axis (a) and in the - plane (b) of 0–12 T in increments of 1 T below 30 K. Black arrows denote the increased magnetic field strength. c, Angular dependence of the superconducting transition temperature under the magnetic field of 4, 8, and 12 T, fitted with the 2D Tinkham model (solid
lines) and 3D Ginzburg–Landau model (dashed lines). Here and for the rest of the paper, is defined by the criterion of 50% , where is determined through the linear fit to the normal state resistivity between 20 and 30 K. Inset indicates the specific configuration during the angle-dependent measurements, where is the angle between magnetic field and film - plane.
To quantitatively describe the observed anisotropic behavior, the upper critical field under both field orientations are extracted using the criterion of 50% (Figure 3). Evidently, the displays a linear-dependence for the out-of-plane magnetic fields, while it follows a square-root relation for the in-plane magnetic fields (inset in Figure 3a). According to the linearized Ginzburg–Landau (GL) model[32], we obtain the zero-temperature in-plane GL coherence length of 27.5 0.2 Å and the superconducting thickness of 64.9 1.9 Å. Note that the derived is close to the film thickness (~68 Å), indicating the whole film is superconducting, consistent with the high crystalline quality of these films.

Figure 3. versus phase diagram for LaSrNiO. a-b, Temperature-dependent out-of-plane (a) and in-plane (b) upper critical field. Here, is defined as the field strength at which resistivity reaches 50% . The dark-red and the dark-blue solid lines are corresponding fitting to based on the WHH theory and the linearized GL model, respectively. The dark-red dashed line in (b) represents the WHH fitting with Maki parameter and spin-orbital scattering parameter both equal to zero (pair breaking by orbital effects only). The black arrows denote the BCS Pauli limit of
As the dependence of for can be originated from the paramagnetic de-paring effects, GL model is inadequate to explain the experimental data since it only takes orbital effects into account[33]. Instead, the single-band Werthamer–Helfand–Hohenberg (WHH) theory[34], which considers both the orbital and paramagnetic de-paring effects, is adopted for the analysis of our data. The overall fitting quality is quite well, yielding the Maki parameter and spin-orbital scattering parameter equal to (0, 0) and (56.5, 0.8) for and , respectively. The essential difference between for two field orientations corresponds well with the anisotropic superconductivity as observed in cuprates[35], that is, orbital-limited for and Pauli-paramagnetic-limited for . In addition, the relatively large signals the spin-orbit effects cannot be ignored here, which may also explain the surpass of the BCS Pauli limit () for the case of in-plane magnetic field. Interestingly, the large for is in qualitative agreement with previous studies[15, 16], which may imply possible existence of the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state[36].
Nonetheless, given the system is now in the dirty limit (see Methods for details), further investigations like high-field measurements are needed, which is beyond present work. It should be pointed out that the above fitting analysis are based on the low-field data due to the limited magnetic field strength (up to 12 T), which may lead to quantitatively deviated description of detailed behavior at low temperatures[37]. Nevertheless, the overall anisotropic behavior should be qualitatively reliable as evidenced by the good reproducibility of the fitting results on different samples. (Extended Data Table 1).
Then we performed angle-dependent measurements of under fixed magnetic fields (Fig. 2c), as widely used to confirm dimensionality of superconductivity in 2D materials[38, 39] as well as in cuprates[40, 41]. As expected, the exhibits a strong dependence on the magnetic field orientations, manifesting a strikingly sharp cusp-like feature near (). It should be noted that extracted using 1% and 90% criterion both reveal similar behaviors (Extended Data Fig. 4), manifesting that this cusp-like feature is criterion-independent. It is known that the angular dependence of can be described by the Tinkham model for 2D superconductors[41, 42]
where is the transition temperature at zero-field, and and are the transition temperature for out-of-plane and in-plane magnetic fields, respectively. For our data, the cusp-like behavior near () can only be well reproduced by the 2D Tinkham model rather than the 3D Ginzburg–Landau model[42], indicating the quasi-2D nature of the superconductivity in nickelates.
(where is the superconducting transition temperature at T). The shaded blue and orange area indicate the orbital-limited and Pauli-limited superconductivity, respectively. The inset of (a) shows and as a function of the reduced temperature for and , respectively. The grey dashed lines are the corresponding linear fits. The inset of (b) is the enlarged view of the for near . Error bars represent the temperature uncertainty and are not denoted if they are smaller than the symbol size.
Moreover, we also checked whether the superconducting transition in nickelates can be described by the typical Berezinskii–Kosterlitz–Thouless (BKT) theory for a 2D superconducting system with the transition temperature () that corresponds to the unbinding of vortex-antivortex pairs[43, 44, 45]. According to the BKT model[44], the current-voltage curves of a 2D superconductor show a power-law dependence () with at . As illustrated in Figure 4a and Figure 4b, the nickelate thin films indeed exhibit a clear BKT behavior and the exponent reaches 3 at around K, which is almost right at the superconducting transition temperature. In addition, the ( and are material-related parameters) relation is expected at the temperature near according to the Halperin-Nelson’s law[46]. As shown in Figure 4c, the evolution of is in line with this anticipation yielding K, which agrees well with the value deduced from the power-law analysis. Similar BKT transition behaviors have been widely observed in 2D superconductors, including gallium thin films[47], ion-gated 2D materials[38, 39], and cuprates[48].

Figure 4. a, Current–voltage characteristics (– curves) at different temperatures plotted in the double-logarithmic scale. The short black lines are corresponding power-law fits () to the experimental data, while the long black line corresponds to the power-law exponent . The inset shows the same set of – curves but in the linear scale. b, Temperature dependence of , as deduced from the power-law fits shown in (a). The interception with the dashed line () indicates the critical temperature K. c, dependence fitted with a BKT behavior (solid line) as discussed in the main text, yielding a K.
Similar magnetotransport experiments have been performed on many infinite-layer nickelate films, which reproduce the observations (Extended Data Figure 5 and 6), indicating the superconductivity in nickelates is inherently quasi-D in nature. And the previous observations of isotropic superconductivity in nickelates may be related to the vertical running defects[15, 16]. Naively, trace amounts of conductive filament paths can significantly affect the transport properties. Note that one of these previous studies was done on the NdSrNiO films grown using our MBE system as well[15]. Compared to LaSrNiO, the NdSrNiO films have larger lattice mismatch with SrTiO substrates, which leads to lower crystalline quality, as evidenced by the unavoidable extra impurity diffractions in the RHEED patterns during the growth[29].

Extended Data Figure 5. Magnetotransport properties for sample #2. a-b, Resistivity of thin film under magnetic fields along -axis (a) and in the - plane (b) of 0-12 T in increments of 1 T below 30 K. The wave-shaped features of - curves are originated from slightly different acquisition rate of current source meter and temperature controller.
In summary, we have synthesized high quality infinite-layer lanthanide nickelate thin films using reactive MBE and obtained highest reported superconducting transition temperature on SrTiO substrates at ambient condition up to date. The upper critical field is found to be strongly anisotropic, showing the dominating role of the orbital and Pauli paramagnetic effects when magnetic field is applied along the axis and in the - plane, respectively. The significant angle-dependent under external magnetic field and the existence of the BKT transition near further confirm the quasi-2D nature of the superconductivity in nickelates. Our findings thus suggest that the quasi-2D hole bands derived from Ni- orbitals may play a more important role than the 3D electron bands in pairing formations in nickelates. As such, the single-band cuprate-like picture may be still valid in describing the superconductivity in infinite-layer nickelates. Acknowledgments. This work is supported by National Key R&D Program of China (Grant No. 2021YFA1400400); National Natural Science Foundation of China (Grant Nos. 1861161004, 61822403, and 11874203) and the Fundamental Research Funds for the Central Universities (No. 0213-14380198).
Author contributions. Y.F.N. conceived the idea and supervised the project. W.J.S., Y.Y.L. and S.J.Y. synthesized the perovskite samples with the help of H.Y.S. and W.G. J.F.Y. and S.J.Y. performed the topotactic reduction experiments. W.J.S. and S.J.Y. characterized the crystalline structure. R.X.L. and X.F.W. performed the transport measurements. Y.Y.L., J.F.Y. and W.J.S. analyzed the transport data. J.Y.L. and Y.D. conducted the STEM measurements. W.J.S., Y.Y.L. and Y.F.N. wrote the manuscript with input from all authors.
Competing financial interests
The authors declare no competing financial interests.
Methods
Film growth and sample preparation
The pristine perovskite films were grown on the -terminated (001) substrates by reactive molecular beam epitaxy using a DCA R450 MBE system, with the substrate temperature of 600 °C and an oxidant background pressure of Torr using the distilled ozone. During the film growth, reflective high-energy electron diffraction (RHEED) was employed in situ to monitor both the growth process and surface quality (Extended Data Figure 1). The growth parameters, such as cation stoichiometry, were optimized as reported previously[29]. To obtain the infinite-layer phase, the samples together with g powder were sealed in a vacuum chamber with background pressure lower than Torr, and then heated to °C for 4 hours, with warming (cooling) rate of 10–15 °C/min.
Structural characterization
Specimens for the cross-sectional STEM were fabricated using the focused ion beam (FIB) techniques on a Thermo Scientific Helios G4 X FIB system. The atomic-resolution STEM-HAADF and EDS images were obtained on a double spherical aberration-corrected FEI Titan G2 60-300 system at 300 kV with a field emission gun. To further analyze the lattice constants of the infinite-layer structure, we did the Fast Fourier transform (FFT) (Extended Data Fig. 2b) and the intensity line profile (Extended Data Fig. 2c) of the HAADF-STEM image. In the FFT image, the diffraction spots from the substrate and film align well along axis while show different periodicities along axis, manifesting the in-plane coherency and difference on the lattice constants. The average lattice constant of the LaSrNiO film is 3.46 Å as extracted from adjacent 11 peaks if considering the lattice constant of SrTiO is 3.905 Å, which is consistent with previous reports[23]. X-ray diffraction (XRD) was performed using a Bruker D8 Discover diffractometer, with the Cu-K radiation of 1.5418 Å wavelength (Extended Data Figure 1, Extended Data Figure 1).
Transport measurements
The transport measurements were performed using the standard six-probe configuration at the Cryogen Free Measurement System (CFMS, Cryogenic). The ohmic contacts were made through the ultrasonic aluminum-wire bonding. The magnetotransport measurements were performed by aligning the sample surface parallel or perpendicular to the applied magnetic field via a rotator, while the “parallel” is defined as the position with minimum resistance under applied magnetic fields.
Upper critical field data fitting
It is known that the superconductivity can be destroyed when sufficiently high magnetic field (above ) is applied. And the presence of is relevant to the orbital limit and the Pauli paramagnetic limit[42]. For the purely orbital-limit scenario, superconductivity is suppressed by the magnetic-field-induced Meissner current. On the other hand, spin alignments of Cooper pairs along the external magnetic fields can also lead to pair breaking, which is known as the Pauli paramagnetic limit. We first consider the linearized Ginzburg-Landau (GL) model[32] based on the pure orbital effect where for and can be expressed as
where denotes the magnetic flux quantum, is the zero-temperature in-plane GL coherence length, and is the superconducting thickness. Based on the above model, we obtain Å and Å.
In addition, the single-band Werthamer–Helfand–Hohenberg (WHH) theory[34], which takes both of the orbital limit and Pauli paramagnetic limit into account, is adopted to get insight into the superconducting behavior in nickelates. As reported previously, the nickelate films are in the dirty limit[16]. To confirm that in our samples, we first estimate the carrier mean free path from the transport measurements according to the formula in ref.49,50 to learn about the cleanliness of the present system
where is the reduced Planck constant, is the elementary charge, and are the carrier density and resistivity, respectively. Here, we obtain the values of and through Hall measurements at 20 K (near ), yielding the corresponding to be 1.6 Å approximately.
The G-L coherence length is determined to be ~27.5 Å from the GL fitting shown above. At the zero-temperature limit, the could be expressed by the in-plane Pippard coherence length in the formulas51
Consequently, the is deduced to be 36.7 Å and 638.2 Å for the clean and dirty limit, respectively. Obviously, the of 36.7 Å is much larger than which violates clean limit assumption, indicating our sample should be in the dirty limit with the of 638.2 Å. Thus, the WHH fitting formula for dirty limit could be used in our data analysis[34]
where is the reduced temperature, is the reduced magnetic field, is the Maki parameter, which represents the relative contribution of the orbital-limited and the paramagnetic-limited , and is the spin-orbit scattering parameter. According to the numerical results of the WHH formula, the fitting parameter should be agreed with the Maki formula[34] [52]
and the reduced magnetic field could be expressed as
where in the unit of T/K.
In the case of , the curve of could fit the data well, manifesting the predominantly orbital-limited superconductivity, as shown in the Figure 3a. In contrast, as shown in the Figure 3b, the purely orbital-limited fit deviated a lot from the experimental data of , implying the Pauli paramagnetic effect should be considered for the quenching of superconductivity. The best fit to the data of is obtained when both the paramagnetic effect and spin-orbit scattering are taken into consideration, with . Given the T/K for in our sample, the parameter is consistent with the value of 56.7 deduced from the Maki formula.
Thermally activated vortex motion analysis
As shown in the Fig. 2, the superconducting transitions exhibit clear broadening effect along with the increasing magnetic field, which could be attributed to the energy dissipation caused by the thermally activated vortex motion. Similar effects have also been reported in cuprates53 and iron arsenides54.
According to the thermally activated dissipation model in terms of flux creep and flux flow55, the in the region where the resistivity is below 1% of the normal-state resistivity should be in linear with the reciprocal of , as expressed by the Arrhenius relationship
where is the activated energy, also represents the pinning potential.
The Arrhenius plots of our data are shown in the Extended Data Figure 3 and b. The pinning potential could be extracted from the slope of the linear fitting and has a power-law dependence on the magnetic field () according to the model, as shown in the Extended Data Figure 3. The success of the fits to our data indicates that the vortex motion contributes to the transport behavior of the nickelates.

Extended Data Figure 3. Thermally activated behavior of LaSrNiO thin film at different magnetic field orientations. a-b, Arrhenius plots of temperature-dependent resistivity at magnetic fields along -axis (a) and in the - plane (b) of 0-12 T in increments of 1 T below 30 K. c, The thermally activated energy extracted by plotted in double logarithmic scale for both orientations. The dashed lines are the corresponding power-law fits () to the data above 4 T which yield the exponents to be 0.65 and 0.13 for magnetic fields along -axis and in the - plane, respectively.
There is one or two orders of magnitude difference between the values of for different field orientations, implying the giant anisotropy of vortex motion. In addition, the power-law exponent is related to the type of pinning force56. Extracted from the fitting results, the values of are 0.13 and 0.65 for and , respectively.
Compared with previous reports in iron-based superconductors57 and cuprates55, the obvious difference of value here manifests the strong anisotropy of the pinning force in the films.
Angle-dependent superconducting transition temperature ()
The plots of angle-dependent in Fig. 2c were extracted from the resistivity curves versus temperature measured under fixed magnetic fields along different orientations, as shown in Extended Data Fig. 4a–c. Angular dependence of extracted following different criterions were also shown in Extended Data Fig. 4d–f. , and correspond to the temperature at which the resistivity reaches 90%, 50% and 1% , respectively, where is determined through the linear fits to the normal state resistivity between 20 and 30 K. The high-quality fits to all these sets of using two-dimensional (2D) Tinkham model demonstrate the criterion-independent quasi-2D superconductivity in nickelates.
Reproducibility
To prove the reproducibility of our main conclusion, we did the same magnetotransport measurements on another film (sample #2), the precursor phase of which was grown at different time from the sample shown in Fig. 2 and Figure 3 (sample #1), but with identical thickness (20 u.c.). Its magnetotransport properties are shown in Extended Data Figure 5, from which a similar anisotropic response for two field orientations can be observed clearly. We also extract the via the 50% criterion and apply the GL theory together with WHH theory to fit the , as shown in Extended Data Figure 6. Similar analysis was performed on the results of sample #2 and the relevant parameters were tabulated in Extended Data Table 1.

Extended Data Figure 6. The upper critical field for sample #2. a-b, Temperature-dependent out-of-plane (a) and in-plane (b) upper critical field for LaSrNiO. The dark-red and the dark-blue solid lines are calculated values based on WHH theory and GL model, respectively. The dark-red dashed line in (b) represents the WHH fitting with Maki parameter and spin-orbital scattering parameter both equal to zero (pair breaking by orbital effects only). The black arrows show the BCS Pauli-limit (where is the superconducting transition temperature at T). The inset of (a) overlays the data and the corresponding WHH fitting for both filed orientations. The inset of (b) is the enlarged view of the data near . Error bars of the extracted data represents the temperature uncertainty. Error bars, if not denoted, are smaller than the symbol size.
Method References
Data availability
The data that support the findings of this study are available from the corresponding authors on reasonable request.
Extended Data for Evidence for quasi-two-dimensional superconductivity in infinite-layer nickelates
Wenjie Sun; Yueying Li; Ruxin Liu; Jiangfeng Yang; Jiayi Li; Shengjun Yan; Haoying Sun; Wei Guo; Zhengbin Gu; Yu Deng; Xuefeng Wang; Yuefeng Nie
†These authors contributed equally to this work
*Corresponding author: [email protected]

Figure 2 (PDF p. 27). Detailed analysis of lattice constants for LaSrNiO thin film. a, The same HAADF-STEM image of a 20-u.c.-thick LaSrNiO thin film as shown in the main text (Figure 1b). b, Fast Fourier Transform (FFT) image of (a), diffraction spots from film and substrate are denoted by white arrows. c, Intensity line profile along the red dashed line shown in (a). The average lattice constant of the LaSrNiO extracted from adjacent 11 peaks is 3.46 Å if considering the lattice constant of SrTiO is 3.905 Å. d, Zoom-in view of (a) and the corresponding energy-dispersive x-ray spectroscopy (EDS) maps with atomic resolution near the film-substrate interface.

Figure Extended Data Fig. 4. Angular dependence of the superconducting transition temperature (). a-c, Temperature-dependent resistivity of LaSrNiO thin film under magnetic fields of 4 T (a), 8 T (b) and 12 T (c) along various orientations. The inset of (a) shows a schematic diagram of the configuration. represents the angle between magnetic field and - plane of the sample. d-e, Angle-dependent , and of the LaSrNiO thin film under magnetic fields of 4 T (d), 8 T (e) and 12 T (f). The black solid curves are fitting to the experimental data using the two-dimensional (2D) Tinkham model.
| (K) | (T/K) | (T) | (Å) | (Å) | Film thickness (Å) | (T) | |||
| #S1, | 18.1 | 2.3 ± 0.2 | 0 | 0 | 28.8 | 27.5 ± 0.2 | 64.9 ± 1.9 | 68 | 43.5 |
| #S1, | 107 ± 2 | 56.5 | 0.8 | 49.7 | 63.9 | ||||
| #S2, | 17.3 | 2.3 ± 0.2 | 0 | 0 | 27.5 | 29.6 ± 0.2 | 64.7 ± 3.5 | 68 | 37.5 |
| #S2, | 105 ± 2 | 55.5 | 0.7 | 45.3 | 59.5 |
Table 1. Extended Data Table 1 | Summary of the corresponding fitting parameters to of the sample #S1 and #S2. The subscripts WHH and GL represent the corresponding fitting results deduced from the WHH and GL models, respectively.
References
- [1]Li, D. et al. Superconductivity in an infinite-layer nickelate. Nature 572, 624-627, doi:10.1038/s41586-019-1496-5 (2019).DOI
- [2]Anisimov, V. I., Bukhtalov, D. & Rice, T. M. Electronic structure of possible nickelate analogs to the cuprates. Phys. Rev. B 59, 7901-7906, doi:10.1103/PhysRevB.59.7901 (1999).DOI
- [3]Lee, P. A., Nagaosa, N. & Wen, X. G. Doping a Mott insulator: physics of high- temperature superconductivity. Rev. Mod. Phys. 78, 17-85, doi:10.1103/RevModPhys.78.17 (2006).
- [4]Pickett, W. E. Electronic-structure of the high-temperature oxide superconductors. Rev. Mod. Phys. 61, 433-512, doi:10.1103/RevModPhys.61.433 (1989).DOI
- [5]Botana, A. S. & Norman, M. R. Similarities and differences between LaNiO₂ and CaCuO₂ and implications for superconductivity. Phys. Rev. X 10, 011024, doi:10.1103/PhysRevX.10.011024 (2020).DOI
- [6]Lechermann, F. Late transition metal oxides with infinite-layer structure: nickelates versus cuprates. Phys. Rev. B 101, 081110(R), doi:10.1103/PhysRevB.101.081110 (2020).DOI
- [7]Karp, J. et al. Many-body electronic structure of NdNiO₂ and CaCuO₂. Phys. Rev. X 10, 021061, doi:10.1103/PhysRevX.10.021061 (2020).
- [8]Jiang, M., Berciu, M. & Sawatzky, G. A. Critical nature of the Ni spin state in doped NdNiO₂. Phys. Rev. Lett. 124, 207004, doi:10.1103/PhysRevLett.124.207004 (2020).DOI
- [9]Botana, A. S., Bernardini, F. & Cano, A. Nickelate superconductors: an ongoing dialog between theory and experiments. J. Exp. Theor. Phys 132, 618-627, doi:10.1134/S1063776121040026 (2021).DOI
- [10]Wu, X. et al. Robust dₓ²₋ᵧ²-wave superconductivity of infinite-layer nickelates. Phys. Rev. B 101, 060504(R), doi:10.1103/PhysRevB.101.060504 (2020).DOI
- [11]Sakakibara, H. et al. Model construction and a possibility of cupratelike pairing in a new d⁹ nickelate superconductor (Nd,Sr)NiO₂. Phys. Rev. Lett. 125, 077003, doi:10.1103/PhysRevLett.125.077003 (2020).DOI
- [12]Wang, Z., Zhang, G. M., Yang, Y. F. & Zhang, F. C. Distinct pairing symmetries of superconductivity in infinite-layer nickelates. Phys. Rev. B 102, 220501(R), doi:10.1103/PhysRevB.102.220501 (2020).DOI
- [13]Leonov, I., Skornyakov, S. L. & Savrasov, S. Y. Lifshitz transition and frustration of magnetic moments in infinite-layer NdNiO₂ upon hole doping. Phys. Rev. B 101, 241108(R), doi:10.1103/PhysRevB.101.241108 (2020).DOI
- [14]Nomura, Y. et al. Formation of a two-dimensional single-component correlated electron system and band engineering in the nickelate superconductor NdNiO₂. Phys. Rev. B 100, 205138, doi:10.1103/PhysRevB.100.205138 (2019).DOI
- [15]Xiang, Y. et al. Physical properties revealed by transport measurements for superconducting Nd₀.₈Sr₀.₂NiO₂ thin films. Chin. Phys. Lett. 38, 047401, doi:10.1088/0256-307X/38/4/047401 (2021).DOI
- [16]Wang, B. Y. et al. Isotropic Pauli-limited superconductivity in the infinite-layer nickelate Nd₀.₇₇₅Sr₀.₂₂₅NiO₂. Nat. Phys. 17, 473-477, doi:10.1038/s41567-020-01128-5 (2021).DOI
- [17]Norman, M. R. Materials design for new superconductors. Rep. Prog. Phys. 79, 074502, doi:10.1088/0034-4885/79/7/074502 (2016).DOI
- [18]Li, D. et al. Superconducting dome in Nd₁₋ₓSrₓNiO₂ infinite layer films. Phys. Rev. Lett. 125, 027001, doi:10.1103/PhysRevLett.125.027001 (2020).
- [19]Zeng, S. et al. Phase diagram and superconducting dome of infinite-layer Nd₁− xSrₓNiO₂ thin films. Phys. Rev. Lett. 125, 147003, doi:10.1103/PhysRevLett.125.147003 (2020).
- [20]Gu, Q. et al. Single particle tunneling spectrum of superconducting Nd₁₋ₓSrₓNiO₂ thin films. Nat. Commun. 11, 6027, doi:10.1038/s41467-020-19908-1 (2020).DOI
- [21]Pan, G. A. et al. Superconductivity in a quintuple-layer square-planar nickelate. Nat. Mater. 21, 160-164, doi:10.1038/s41563-021-01142-9 (2022).DOI
- [22]Yu, Y. et al. High-temperature superconductivity in monolayer Bi₂Sr₂CaCu₂O₈₊δ. Nature 575, 156-163, doi:10.1038/s41586-019-1718-x (2019).DOI
- [23]Osada, M. et al. Nickelate superconductivity without rare-earth magnetism: (La,Sr)NiO₂. Adv. Mater. 33, e2104083, doi:10.1002/adma.202104083 (2021).DOI
- [24]Lu, H. et al. Magnetic excitations in infinite-layer nickelates. Science 373, 213-216, doi:10.1126/science.abd7726 (2021).DOI
- [25]Hayward, M. A., Green, M. A., Roesseinsky, M. J. & Sloan, J. Sodium hydride as a powerful reducing agent for topotactic oxide deintercalation: synthesis and characterization of the nickel(I) oxide LaNiO₂. J. Am. Chem. Soc. 121, 8843-8854, doi:10.1021/ja991573i (1999).DOI
- [26]Hayward, M. A. & Rosseinsky, M. J. Synthesis of the infinite layer Ni(I) phase NdNiO₂₊ₓ by low temperature reduction of NdNiO₃ with sodium hydride. Solid State Sci. 5, 839-850, doi:10.1016/S1293-2558(03)00111-0 (2003).DOI
- [27]Lee, K. W. & Pickett, W. E. Infinite-layer LaNiO₂: Ni¹⁺ is not Cu²⁺. Phys. Rev. B 70, 165109, doi:10.1103/PhysRevB.70.165109 (2004).DOI
- [28]Kitatani, M. et al. Nickelate superconductors—a renaissance of the one-band Hubbard model. npj Quantum Mater. 5, 59, doi:10.1038/s41535-020-00260-y (2020).DOI
- [29]Li, Y. Y. et al. Impact of cation stoichiometry on the crystalline structure and superconductivity in nickelates. Front. Phys. 9, 719534, doi:10.3389/fphy.2021.719534 (2021).DOI
- [30]Lee, K. et al. Aspects of the synthesis of thin film superconducting infinite-layer nickelates. APL Mater. 8, 041107, doi:10.1063/5.0005103 (2020).DOI
- [31]Zeng, S. et al. Superconductivity in infinite-layer nickelate La₁₋ₓCaₓNiO₂ thin films. Sci. Adv. 8, eabI9927, doi:10.1126/sciadv.abI9927 (2021).DOI
- [32]Harper, F. E. & Tinkham, M. The mixed state in superconducting thin films. Phys. Rev. 172, 441-450, doi:10.1103/PhysRev.172.441 (1968).DOI
- [33]Maki, K. & Tsuneto, T. Pauli paramagnetism and superconducting state. Prog. Theor. Phys. 31, 945-956, doi:10.1143/PTP.31.945 (1964).DOI
- [34]Werthamer, N. R., Helfand, E. & Hohenberg, P. C. Temperature and purity dependence of the superconducting critical field, Hc₂. III. electron spin and spin-orbit effects. Phys. Rev. 147, 295-302, doi:10.1103/PhysRev.147.295 (1966).DOI
- [35]Sekitani, T., Miura, N., Ikeda, S., Matsuda, Y. H. & Shiohara, Y. Upper critical field for optimally-doped YBa₂Cu₃O₇₋δ. Physica B Condens. Matter. 346-347, 319-324, doi:10.1016/j.physb.2004.01.098 (2004).DOI
- [36]Bianchi, A., Movshovich, R., Capan, C., Pagluso, P. G. & Sarrao, J. L. Possible Fulde-Ferrell-Larkin-Ovchinnikov superconducting state in CeCoIn₅. Phys. Rev. Lett. 91, 187004, doi:10.1103/PhysRevLett.91.187004 (2003).
- [37]Matsuda, Y. & Shimahara, H. Fulde–Ferrell–Larkin–Ovchinnikov state in heavy fermion superconductors. J. Phys. Soc. Jpn. 76, 051005, doi:10.1143/JPSJ.76.051005 (2007).DOI
- [38]Lu, J. M. et al. Evidence for two-dimensional Ising superconductivity in gated MoS₂. Science 350, 1353-1357, doi:10.1126/science.aab2277 (2015).DOI
- [39]Saito, Y., Kasahara, Y., Ye, J., Iwasa, Y. & Nojima, T. Metallic ground state in an ion-gated two-dimensional superconductor. Science 350, 409-413, doi:10.1126/science.1259440 (2015).
- [40]Cao, X. W. et al. Two-dimensional properties of GdBa₂Cu₃O₇−δ epitaxial thin films. Phys. Rev. B 56, 8341-8345, doi:10.1103/PhysRevB.56.8341 (1997).DOI
- [41]Welp, U., Kwok, W. K., Crabtree, G. W., Vandervoort, K. G. & Liu, J. Z. Angular dependence of the upper critical field of YBa₂Cu₃O₇−δ single crystals. Phys. Rev. B Condens. Matter 40, 5263-5265, doi:10.1103/physrevb.40.5263 (1989).DOI
- [42]Tinkham, M. Introduction to superconductivity. (McGraw-Hill, 1996).
- [43]Beasley, M. R., Mooij, J. E. & Orlando, T. P. Possibility of vortex-antivortex pair dissociation in two-dimensional superconductors. Phys. Rev. Lett. 42, 1165-1168, doi:10.1103/PhysRevLett.42.1165 (1979).DOI
- [44]Reyren, N. et al. Superconducting interfaces between insulating oxides. Science 317, 1196-1199, doi:10.1126/science.1146006 (2007).DOI
- [45]Chen, Z. et al. Two-dimensional superconductivity at the LaAlO₃/KTaO₃ (110) heterointerface. Phys. Rev. Lett. 126, 026802, doi:10.1103/PhysRevLett.126.026802 (2021).DOI
- [46]Halperin, B. I. & Nelson, D. R. Resistive transition in superconducting films. J. Low Temp. Phys. 36, 599-616, doi:10.1007/Bf00116988 (1979).DOI
- [47]Xing, Y. et al. Quantum Griffiths singularity of superconductor-metal transition in Ga thin films. Science 350, 542-545, doi:10.1126/science.aaa7154 (2015).DOI
- [48]Li, Q., Hücker, M., Gu, G. D., Tsvelik, A. M. & Tranquada, J. M. Two-dimensional superconducting fluctuations in stripe-ordered La₁.₈₇₅Ba₀.₁₂₅CuO₄. Phys. Rev. Lett. 99, 067001, doi:10.1103/PhysRevLett.99.067001 (2007).