betaFeedback

WorksPhysics and Astronomy

Two-dimensional structures formed by pair potentials: An analytical and numerical study

Abstract

Understanding the thickness dependence of the excess energy of thin films and identifying the deviation from the scaling law that holds for thicker films are crucial for predicting the formation of two-dimensional (2D) materials derived from nonlayered structures, commonly referred to as non-van der Waals (non-vdW) 2D materials. Here, we analytically study the excess energy of thin films as a function of the number of layers NN, assuming pair potentials. We show that the 1/N1/N scaling law of the excess energy breaks down in the monolayer limit when the interatomic interactions are long-ranged. The analytical results are confirmed by numerical simulations using the Lennard-Jones and Morse potentials. The present work suggests that non-vdW 2D structures can be formed by pair potentials alone.

Introduction

Non-van der Waals (non-vdW) two-dimensional (2D) materials are monolayers derived from nonlayered bulk structures. Covalently bonded group-IV elements are known to form buckled honeycomb structures [1, 2, 3, 4]. Potential structures of elemental 2D metals have been investigated using first-principles approaches [5, 6, 7]. Plumbene (2D Pb) and goldene (2D Au) have been synthesized [8, 9]. However, experimental realization of 2D metallic monolayers remains rare, although metallic thin films or membranes with sub-nanometer thicknesses have also been reported [10, 11]. Hypothetical non-vdW 2D compounds have been predicted through first-principles calculations, with several descriptors, such as the anisotropy of force constants [12, 13, 14] and the exfoliation energy [15, 16, 17], employed to screen the materials space. However, many predicted 2D materials remain unrealized, highlighting the gap between theoretical predictions and experimental synthesis [18, 19].

Recently, the author studied the thickness dependence of the excess energy of thin films relative to the bulk energy and demonstrated that the breakdown of the 1/N1/N scaling law is a useful indicator for predicting non-vdW 2D materials such as silicene, germanene, plumbene, and goldene, where NN is the number of layers [20]. While first-principles approaches are useful for accurately predicting the excess energies of realistic 2D materials [21], developing an analytical model to capture the underlying physics behind the 1/N1/N scaling law would be useful.

In this paper, we analytically study the excess energy of thin films formed by pair potentials. The behavior of the excess energy at N=1N=1 depends on the range of the interatomic interactions. For short-range interaction, the 1/N1/N scaling law holds even in the monolayer limit. On the other hand, if the interaction becomes long-ranged, the breakdown of the 1/N1/N scaling law is observed for small NN. This is confirmed by numerical calculations using the Lennard-Jones (LJ) and Morse potentials. Thin films formed by pair potentials serve as a minimal model for the formation of non-vdW 2D structures.

Theory

The aim of this section is to formulate the excess energy of NN layer thin films. To analytically derive the thickness dependence of the excess energy, we assume pair potentials for the interatomic interactions.

Total energy of NN layer thin films

Let us consider a monatomic crystal in which each particle interacts with other particles through a pair potential v(R)v(R), where RR is the interatomic distance. The crystal exhibits a close-packed structure consisting of triangular lattices stacked along the surface normal. We construct an NN-layer thin film derived from the close-packed surface and examine the NN-dependence of the total energy below. In our analytical study, geometry relaxation in thin films is not considered.

For N=1N=1, i.e., a monolayer triangular lattice, the total energy is a sum of the two-body interaction energy between atoms. This is expressed by

E1=12∑μ∑ν(≠μ)v(Rμν1,1),(1)E_1 = \frac{1}{2} \sum_{\mu} \sum_{\nu(\ne\mu)} v\left(R_{\mu\nu}^{1,1}\right), \tag*{(1)}

where the factor 1/21/2 accounts for the double counting. We have defined the interatomic distance between the atom μ\mu in the layer nn and the atom ν\nu in the layer mm as

Rμνn,m=(xμn−xνm)2+(yμn−yνm)2+(zμn−zνm)2,(2)R_{\mu\nu}^{n,m} = \sqrt{\left(x_\mu^n-x_\nu^m\right)^2+\left(y_\mu^n-y_\nu^m\right)^2+\left(z_\mu^n-z_\nu^m\right)^2}, \tag*{(2)}

where xμnx_\mu^n, yμny_\mu^n, and zμnz_\mu^n are the Cartesian coordinates of the atom μ\mu in the layer nn. For the adjacent interlayer distance of dd, zμn−zνmz_\mu^n-z_\nu^m may be expressed by ∣n−m∣d|n-m|d.

For NN thin films, the total energy is a sum of the intralayer energy for each layer and the interlayer energy энд_mid=1 between different layers, which is given by

EN=NE1+12∑n=1N∑m≠nNV(n,m),(3)E_N = N E_1 + \frac{1}{2}\sum_{n=1}^{N}\sum_{m\ne n}^{N} V(n,m), \tag*{(3)}

where the summation in the second term is restricted to n≠mn \ne m. The interlayer energy between the nnth and mmth layers is defined as

V(n,m)=∑μ(n)∑ν(m)v(Rμνn,m),(4)V(n,m) = \sum_{\mu}^{(n)}\sum_{\nu}^{(m)} v(R_{\mu\nu}^{n,m}), \tag*{(4)}

where the sums over μ\mu and ν\nu runs over the atoms in the nnth and mmth layers, respectively. By definition,

V(n,m)=V(m,n),(5)V(n,m) = V(m,n), \tag*{(5)}
V(n,n+l)=V(m,m+l)(6)V(n,n+l) = V(m,m+l) \tag*{(6)}

for an integer ll satisfying 1≤n(m)+l≤N1 \le n(m)+l \le N. For the bulk limit, the total energy per layer is defined as

Ebulk=lim⁡N→∞ENN=E1+Eint,(7)E_{\mathrm{bulk}} = \lim_{N\to\infty}\frac{E_N}{N} = E_1 + E_{\mathrm{int}}, \tag*{(7)}

where the interaction energy of bulk is expressed by

Eint=lim⁡N→∞12N∑n=1N∑m≠nNV(n,m).(8)E_{\mathrm{int}} = \lim_{N\to\infty}\frac{1}{2N}\sum_{n=1}^{N}\sum_{m\ne n}^{N} V(n,m). \tag*{(8)}

Excess energy of NN layer thin films

We measure the excess energy of thin films from the bulk energy as in Ref. [20]. This is defined as

ΔE(N)=ENN−Ebulk,(9)\Delta E(N) = \frac{E_N}{N} - E_{\mathrm{bulk}}, \tag*{(9)}

which is expressed as

ΔE(N)=12N∑n=1N∑m≠nNV(n,m)−Eint.(10)\Delta E(N) = \frac{1}{2N}\sum_{n=1}^{N}\sum_{m\ne n}^{N} V(n,m) - E_{\mathrm{int}}. \tag*{(10)}

This is equal to the difference between the interlayer interaction energy per layer for the NN-layered thin film and that in the bulk.

Empirical rule for realizing non-vdW 2D materials

In the previous study [20], we have shown that the ΔE(N)\Delta E(N) exhibits the 1/N1/N scaling law for large NN within a phenomenological discussion, where the thin film energy is assumed to be EN≃2Esurf+(N−2)EbulkE_N \simeq2E_{\mathrm{surf}} + (N-2)E_{\mathrm{bulk}} with EsurfE_{\mathrm{surf}} being the energy of the surface layer. In addition, by performing first-principles calculations, we have demonstrated that specific elements (e.g., silicon and gold) exhibit the downward deviation from the 1/N1/N scaling law in the monolayer limit. To evaluate the magnitude of the deviation, we have calculated the following quantity [20]

p1=dln⁡ΔE(N)dln⁡N∣N=1≃ln⁡ΔE(2)−ln⁡ΔE(1)ln⁡2.(11)p_1 = \left.\frac{d\ln\Delta E(N)}{d\ln N}\right|_{N=1} \simeq\frac{\ln\Delta E(2)-\ln\Delta E(1)}{\ln2}. \tag*{(11)}

If ΔE(N)∝1/N\Delta E(N) \propto1/N even at N=1N=1, p1=−1p_1=-1. On the other hand, if ΔE(N)\Delta E(N) exhibits the downward deviation, p1>−1p_1>-1. For example, silicene and goldene show p1=−0.38p_1=-0.38 and −0.58-0.58, respectively.

Below, we provide an analytical discussion that the long-range interlayer interaction energy V(n,m)V(n,m) is important for obtaining p1>−1p_1>-1. If V(n,m)V(n,m) is short-ranged, the 1/N1/N scaling law holds even at N=1N=1, but if V(n,m)V(n,m) is long-ranged, the deviation from the 1/N1/N scaling law can appear. In Sec. III, we will demonstrate how the range of the interatomic interaction v(R)v(R) modulates that of V(n,m)V(n,m) by assuming the LJ and Morse potentials.

Short-range interaction

We first consider that V(n,m)V(n,m) is short-ranged enough to assume that the interaction energies between only adjacent layers are dominant. In such thin films, the contribution to the excess energy from the surface layers (i.e., layers n=1n=1 and NN) is larger than that from the inner layers (i.e., n=2,3,⋯ ,N−1n=2,3,\cdots,N-1). Therefore, (N−2)/N(N-2)/N of the interlayer interaction energy of bulk (EintE_{\mathrm{int}}) is cancelled by the excess energy in the inner layers of the thin film. We then obtain

ΔE(N)≃12N[∑m≠1NV(1,m)+∑m≠NNV(N,m)]−2NEint=1N∑m≠1NV(1,m)−2NEint.(12)\begin{aligned} \Delta E(N) \simeq\frac{1}{2N}\left[\sum_{m\ne1}^{N}V(1,m)+\sum_{m\ne N}^{N}V(N,m)\right]-\frac{2}{N}E_{\mathrm{int}} \\ &= \frac{1}{N}\sum_{m\ne1}^{N}V(1,m)-\frac{2}{N}E_{\mathrm{int}}. \tag*{(12)} \end{aligned}

In the last line, we used the fact that the contribution from n=1n=1 (bottom layer) is the same as that from n=Nn=N (top layer). The partial cancellation of the excess energy between thin films and bulk holds when

Eint≃12∑m≠2NV(2,m).(13)E_{\mathrm{int}} \simeq\frac{1}{2}\sum_{m\ne2}^{N}V(2,m). \tag*{(13)}

We have assumed that the contributions from n=2,3,⋯ ,N−1n=2,3,\cdots,N-1 are the same. Thus, we obtain

ΔE(N)≃1N∑m≠1NV(1,m)−1N∑m≠2NV(2,m)(14)\Delta E(N) \simeq\frac{1}{N}\sum_{m\ne1}^{N}V(1,m)-\frac{1}{N}\sum_{m\ne2}^{N}V(2,m) \tag*{(14)}

With (6), several terms are cancelled out in (14). Finally, we obtain

ΔE(N)≃1N[V(1,N)−V(2,1)]≃−1NV(2,1).(15)\begin{aligned} \Delta E(N) \simeq\frac{1}{N}[V(1,N)-V(2,1)] \\ &\simeq-\frac{1}{N}V(2,1). \tag*{(15)} \end{aligned}

which is proportional to 1/N1/N. We assumed ∣V(1,N)∣≪∣V(2,1)∣|V(1,N)| \ll|V(2,1)| and V(2,1)<0V(2,1)<0. When this is extrapolated to N=1N=1, one obtains

ΔE1ext=lim⁡N→1ΔE(N)=−V(2,1).(16)\Delta E_1^{\mathrm{ext}}=\lim_{N\to1}\Delta E(N)=-V(2,1). \tag*{(16)}

On the other hand, at N=1N=1, the total energy is E1E_1 exactly. Therefore, with (13) again, one obtains

ΔE(1)=E1−(E1+Eint)≃−12∑m=1m≠2NV(2,m).(17)\Delta E(1)=E_1-(E_1+E_{\mathrm{int}})\simeq-\frac{1}{2}\sum_{\substack{m=1\\m\ne2}}^{N}V(2,m). \tag*{(17)}

As the interlayer energies between adjacent layers are dominant (i.e., ∣V(2,1)∣=∣V(2,3)∣≫∣V(2,m)∣|V(2,1)|=|V(2,3)|\gg|V(2,m)| for m≥4m\ge4), we obtain

ΔE(1)≃−V(2,1),(18)\Delta E(1)\simeq-V(2,1), \tag*{(18)}

which is exactly equal to (16) and thus follows the 1/N1/N scaling law.

Long-range interaction

The analysis of the excess energy described in Sec. II B 2 can be extended to the case for the long-range interlayer interactions. We now assume that the contribution to the excess energy from the ll surface layers (i.e., n=1,2,⋯ ,ln=1,2,\cdots,l and N−l+1,N−l+2,⋯ ,NN-l+1,N-l+2,\cdots,N) is larger than that from the inner layers (i.e., n=l+1,l+2,⋯N−ln=l+1,l+2,\cdots N-l). Then, (N−2l)/N(N-2l)/N of the interlayer interaction energy of bulk is cancelled by the excess energy in the inner layers of the thin film. The inequality N≥2l+1N\ge2l+1 is satisfied when more than one inner layer exists. In addition, we assume that the nnth layer from the top has the same energy as the nnth layer from the bottom for n≤ln\le l. With these approximations, we obtain

ΔE(N)≃1N[∑m=1m≠1NV(1,m)+⋯+∑m=1m≠lNV(l,m)]−2lNEint(19)\Delta E(N)\simeq\frac{1}{N}\left[\sum_{\substack{m=1\\m\ne1}}^{N}V(1,m)+\cdots+\sum_{\substack{m=1\\m\ne l}}^{N}V(l,m)\right]-\frac{2l}{N}E_{\mathrm{int}} \tag*{(19)}

under the condition of the excess energy cancellation

Eint≃12∑m=1m≠l+1NV(l+1,m).(20)E_{\mathrm{int}}\simeq\frac{1}{2}\sum_{\substack{m=1\\m\ne l+1}}^{N}V(l+1,m). \tag*{(20)}

As in Sec. II B 2, we ignore the interlayer interaction energy for which the interlayer distance satisfies z≥(l+1)dz\ge(l+1)d, where dd is the interlayer spacing. With a straightforward calculation, one obtains

ΔE(N)≃−1N∑k=1lkV(l+1,l−k+1),(21)\Delta E(N)\simeq-\frac{1}{N}\sum_{k=1}^{l}kV(l+1,l-k+1), \tag*{(21)}

which is proportional to 1/N1/N. At N=1N=1, this is extrapolated to

ΔE1ext=−∑k=1lkV(l+1,l−k+1).(22)\Delta E_1^{\mathrm{ext}}=-\sum_{k=1}^{l}kV(l+1,l-k+1). \tag*{(22)}

On the other hand, (17) derived for the short-range interactions can be generalized to

ΔE(1)≃−12∑m=1m≠l+1NV(l+1,m)≃−[V(l+1,1)+⋯+V(l+1,l)].(23)\begin{aligned} \Delta E(1)&\simeq-\frac{1}{2}\sum_{\substack{m=1\\m\ne l+1}}^{N}V(l+1,m)\\ &\simeq-\left[V(l+1,1)+\cdots+V(l+1,l)\right]. \tag*{(23)} \end{aligned}

Note that the following difference

ΔE(1)−ΔE1ext=∑k=1l−1kV(l+1,l−k)(24)\Delta E(1)-\Delta E_1^{\mathrm{ext}}=\sum_{k=1}^{l-1}kV(l+1,l-k) \tag*{(24)}

is negative because V(n,m)<0V(n,m)<0. Therefore, the excess energy at N=1N=1 is smaller than the theoretical curve of the 1/N1/N scaling law, indicating the downward deviation from the 1/N1/N scaling law. Note that the expressions for ΔE(N)\Delta E(N), EintE_{\mathrm{int}}, and ΔE1ext\Delta E_1^{\mathrm{ext}} given in Sec. II B 2 can be recovered from those derived in this section by assuming l=1l=1. For l≥2l\ge2, (24) shows that V(l+1,l−1)V(l+1,l-1), which is the next-nearest interlayer interaction energy, begins to contribute to the deviation from the 1/N1/N scaling law.

Numerical simulation

To provide a concrete example illustrating the theory developed in Sec. II, we study the crystals formed by the LJ and Morse potentials that are implemented in the Atomic Simulation Environment (ASE) [22]. Below, we consider NN-layer thin films derived from the (111) surface of a face-centered cubic structure that exhibits the ABC stacking. Thin films with the AB stacking, derived from a hexagonal close-packed structure, are almost degenerate in energy with their ABC stacking counterparts. The structural optimization was performed using the Broyden-Fletcher-Goldfarb-Shanno (BFGS) method [23].

The LJ potential is defined as

vLJ(R)=4ε[(σR)12−(σR)6]C(R),(25)v_{\mathrm{LJ}}(R)=4\varepsilon\left[\left(\frac{\sigma}{R}\right)^{12}-\left(\frac{\sigma}{R}\right)^6\right]C(R), \tag*{(25)}

where ε\varepsilon and σ\sigma are the parameters that determine the energy and length scales, respectively. The cutoff function is assumed to be

C(R)=(Rc2−R2)2(Rc2+2R2−3Ro2)(Rc2−Ro2)3,(26)C(R)=\frac{(R_c^2-R^2)^2(R_c^2+2R^2-3R_o^2)}{(R_c^2-R_o^2)^3}, \tag*{(26)}

where RcR_c and Ro=0.66RcR_o=0.66R_c are the cutoff radii, which ensure continuity of the energy and forces [24]. In the present work, we tuned RcR_c to change the range of the pair interactions, and simultaneously, the range of the interlayer interactions.

N-dependence of the excess energy of thin films

Figure 2. The NN-dependence of the excess energy of thin films formed by (a) the LJ potentials parametrized by the cutoff radii RcR_c and (b) the Morse potentials parametrized by the exponential prefactors ρ0\rho_0. The downward deviation from the 1/N1/N scaling law is observed when RcR_c is large and ρ0\rho_0 is small. The value of p1p_1 in Eq. (11) is indicated.

The Morse potential is defined as

vM(R)=ε[e−2ρ0(s−1)−2e−ρ0(s−1)]S2(R)(27)v_{\mathrm{M}}(R)=\varepsilon\left[e^{-2\rho_0(s-1)}-2e^{-\rho_0(s-1)}\right]S_2(R) \tag*{(27)}

with a dimensionless distance s=R/r0s=R/r_0. ε\varepsilon and r0r_0 are the parameters that determine the energy and length scales, respectively. S2(R)S_2(R) is a sigmoid-like function that smoothly interpolates between two points, (R,S2)=(1.9r0,1)(R,S_2)=(1.9r_0,1) and (2.7r0,0)(2.7r_0,0), where the default values for the cutoff range have been assumed [22]. We tuned the exponential prefactor ρ0\rho_0. A small ρ0\rho_0 gives a moderate change of the pair potential, yielding long-range interlayer interactions.

The interlayer interaction energy V(1,m)V(1,m) can be determined recursively from the total energies of thin films up to the mm layers and the interaction energies up to V(1,m−1)V(1,m-1). For m=2m=2,

V(1,2)=E2−2E1,(28)V(1,2)=E_2-2E_1, \tag*{(28)}

and for m≥3m\geq3,

V(1,m)=Em−mE1−∑k=2m−1(m−k+1)V(1,k).(29)V(1,m)=E_m-mE_1-\sum_{k=2}^{m-1}(m-k+1)V(1,k). \tag*{(29)}

Figure 1 shows how two parameters, RcR_c for the LJ potential and ρ0\rho_0 for the Morse potential, affect the range of the interlayer interactions V(1,m)V(1,m). When Rc=2σR_c=2\sigma (LJ) and ρ0=8\rho_0=8 (Morse), ∣V(1,2)∣\lvert V(1,2)\rvert is more than a hundred times larger than ∣V(1,m)∣\lvert V(1,m)\rvert with m≥3m\geq3. This indicates that the interatomic interaction is sufficiently short-ranged, so that the interlayer interaction is also short-ranged. As RcR_c increases or ρ0\rho_0 decreases, the magnitude

Negative interlayer interaction energy for LJ and Morse thin films

Figure 1. Negative interlayer interaction energy −V(1,m)-V(1,m) for (a) the LJ and (b) the Morse thin films, where the cutoff radii RcR_c and the exponential prefactors ρ0\rho_0 are tuned, respectively.

of ∣V(1,m)∣\lvert V(1,m)\rvert with m≥3m\geq3 becomes large, and the interaction range becomes long-ranged. For the LJ thin films, the curves of Rc=5σR_c=5\sigma and 10σ10\sigma almost overlap. On the other hand, the range of interlayer interaction is further increased as ρ0\rho_0 decreases. No convergence was obtained when ρ0≤2\rho_0\leq2 for the Morse potential.

Figure 2 shows ΔE(N)\Delta E(N) of NN-layered thin films formed by (a) the LJ and (b) the Morse potentials. For short-range interaction, i.e., Rc=2σR_c=2\sigma (LJ) and ρ0=8\rho_0=8 (Morse), the excess energy follows the 1/N1/N scaling law even at N=1N=1, yielding p1≃−1p_1\simeq-1. As RcR_c increases or ρ0\rho_0 decreases, the interaction range becomes long-ranged, yielding the downward deviation from the 1/N1/N scaling law. When Rc=10σR_c=10\sigma (LJ) and ρ0=3\rho_0=3 (Morse), p1=−0.8p_1=-0.8 and −0.47-0.47 are obtained, respectively. Thus, the numerical results confirm the analytical result demonstrated in Sec. II that long-range interlayer interactions are relevant for the breakdown of the 1/N1/N scaling law.

Even without geometry relaxation, the excess energy exhibits the downward deviation from the 1/N1/N scaling law. We obtain p1=−0.8p_1=-0.8 and −0.31-0.31 for Rc=10σR_c=10\sigma (LJ) and ρ0=3\rho_0=3 (Morse), respectively. These results also support the assumption introduced in Sec. II, where geometry relaxation has a minor impact on the scaling law.

Conclusion

The downward deviation of the excess energy from the 1/N1/N scaling law is a useful descriptor for identifying non-vdW 2D materials [20]. To construct a model system exhibiting a breakdown of the 1/N1/N scaling law, we have studied the thickness dependence of the excess energy of thin films formed by pair potentials. Our analytical results show that the 1/N1/N scaling law of the excess energy breaks down in the monolayer limit when the interatomic interactions are long-ranged. This has been confirmed by numerical simulations using the LJ and Morse potentials. The present work suggests that non-vdW 2D structures can be formed by pair potentials alone, provided that the interactions are long-ranged. The effects of many-body interactions (e.g., chemical bonds) beyond the pair potential approximation should be investigated using density-functional theory. The effects of substrates, encapsulation, and other environmental factors (e.g., strains) on the formation of non-vdW 2D structures are beyond the scope of the present work.

ACKNOWLEDGMENTS

This work was supported by JSPS KAKENHI (Grant No. 24K01142).

References

  1. [1]P. Vogt, P. De Padova, C. Quaresima, J. Avila, E. Frantzeskais, M. C. Asensio, A. Resta, B. Ealet, and G. Le Lay, Silicene: Compelling experimental evidence for graphene-like two-dimensional silicon, Phys. Rev. Lett. 108, 155501 (2012).DOI
  2. [2]A. Fleurence, R. Friedlein, T. Ozaki, H. Kawai, Y. Wang, and Y. Yamada-Takamura, Experimental evidence for epitaxial silicene on diboride thin films, Phys. Rev. Lett. 108, 245501 (2012).pubmed.ncbi.nlm.nih.gov/23004288
  3. [3]M E Dávila, L. Xian, S. Cahangirov, A. Rubio and G. Le Lay, Germanene: a novel two-dimensional germanium allotrope akin to graphene and silicene, New J. Phys. 16, 095002 (2014).DOI
  4. [4]A. Molle, J. Yuhara, Y. Yamada-Takamura, and Z. Sofer, Synthesis of Xenes: physical and chemical methods, Chem. Soc. Rev. 54, 1845 (2025).DOI
  5. [5]J. Nevalaita and P. Koskinen, Atlas for the properties of elemental two-dimensional metals, Phys. Rev. B 97, 035411 (2018).DOI
  6. [6]S. Ono, Dynamical stability of two-dimensional metals in the periodic table, Phys. Rev. B 102, 165424 (2020).DOI
  7. [7]K. R. Abidi and P. Koskinen, Gentle tension stabilizes atomically thin metallens, Nanoscale 16, 19649 (2024).DOI
  8. [8]J. Yuhara, B. He, N. Matsunami, M. Nakatake, and G. Le Lay, Graphene’s latest cousin: Plumbene epitaxial growth on a “Nano WaterCube”, Adv. Mater. 31, 1901017 (2019).DOI
  9. [9]S. Kashiwaya, Y. Shi, J. Lu, D. G. Sangiovanni, G. Greczynski, M. Magnuson, M. Andersson, J. Rosen, and L. Hultman, Synthesis of goldene comprising single-atom layer gold, Nat. Synth. 3, 744 (2024).DOI
  10. [10]F. Ren, Z. Han, L. Zhu, Z. Lei, G. Shi, Z. Li, C.-H. Lin, L. Hu, H. Li, X. Guan, B. Jia, P. Kumar, and T. Ma, Metallene: ångström-scale 2D metals, Adv. Mater. 38, e12683 (2025).DOI
  11. [11]J. Zhao, L. Li, P. Li, L. Dai, J. Dong, L. Zhou, Y. Wang, P. Zhang, K. Ji, Y. Zhang, H. Yu, Z. Wei, J. Li, X. Li, Z. Huang, B. Wang, J. Liu, Y. Chen, X. Zhang, S. Wang, et al., Realization of 2D metals at the ångström thickness limit, Nature 639, 354 (2025).DOI
  12. [12]X. Jia, Q. Shao, Y. Xu, R. Li, K. Huang, Y. Guo, C. Qu, and E. Gao, Elasticity-based-exfoliability measure for high-throughput computational exfoliation of two-dimensional materials, npj Comput. Mater. 7, 211 (2021).DOI
  13. [13]M. Bagheri, E. Berger, and H. P. Komsa, Identification of material dimensionality based on force constant analysis, J. Phys. Chem. Lett. 14, 7840 (2023).DOI
  14. [14]M. Bagheri, E. Berger, H. P. Komsa, and P. Koskinen, Massive discovery of low-dimensional materials from universal computational strategy, Chem. Mater. 38, 2395 (2026).
  15. [15]R. Friedrich, M. Ghorbani-Asl, S. Curtarolo, and A. V. Krasheninnikov, Data-driven quest for two-dimensional non-van der waals materials, Nano Lett. 22, 989 (2022).DOI
  16. [16]T. Barnovsky, C. Timm, and R. Friedrich, High-Throughput Prediction of Exfoliable Non-van der Waals Materials from a Universal Potential, Nat. Commun. 17, 8977 (2026).
  17. [17]Y. Zhong, Y. Xiao, Z. Qian, W. Xiong, and P. Huang, High-throughput exfoliation of multiferroic ternary oxide monolayers with high transition temperature and giant spin splitting, npj Comput. Mater. 11, 383 (2025).DOI
  18. [18]M. A. Akhound, T. M. Boland, M. O. Sauer, M. Batzill, B. M. Abraham, S. Canulescu, Y. Gogotsi, P. Hofmann, A. Kis, J. Lu, T. Michely, S. Raza, W. Ren, J. A. Robinson, Z. Sofer, J. Teng, S. Ulstrup, M. Zhao, X. Zhao, J. J. Mortensen, T. Olsen, and K. S. Thygesen, Large-Scale Integration of Experimental and Computational Data for 2D Materials, ACS Nano 21, 12008 (2026).
  19. [19]S. Ono, Beyond geometrical screening in predicting two-dimensional materials, J. Phys.: Condens. Matter 38, 211501 (2026).
  20. [20]S. Ono, Framework for identifying non-van der Waals two-dimensional materials, Phys. Rev. B 112, 075403 (2025).
  21. [21]S. Ono, Hidden layered structures from carbon-analog metastability in metal dichalcogenides, Phys. Rev. Materials 10, 044001 (2026).
  22. [22]A. H. Larsen, J. J. Mortensen, J. Blomqvist, I. E. Castelli, R. Christensen, M. Dułak, J. Friis, M. N. Groves, B. Hammer, C. Hargus et al., The atomic simulation environment—a Python library for working with atoms, J. Phys.: Condens. Matter 29, 273002 (2017).DOI
  23. [23]W. H. Press, S. A. Teukolsky, W. T. Vetterling, and B. P. Flannery, Numerical Recipes in C, Cambridge University Press, Cambridge (1992).
  24. [24]https://github.com/google/jax-md

Paper details

vlnc:W_e27dzfhs
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents