betaFeedback

WorksPhysics and Astronomy

Active actions: effective field theory for active nematics

Abstract

Active matter consumes energy from the environment and transforms it into mechanical work. Notable examples from biology include cell division, bacterial swarms, and muscle contraction. In this work, we investigate the nature of active matter systems using the powerful effective field theory toolbox. This allows us to construct the most general theory without ambiguity up to a given order in the derivative expansion. Our primary focus is active nematics – liquid crystal systems that spontaneously break rotational but not translational symmetry – in two spatial dimensions. (Such spontaneous symmetry breaking is allowed if the nematic is embedded in a higher dimensional space.) While we focus on this one particular class of physical system, the tools developed here can in principle be applied to any active matter system. Our theories give unambiguous predictions for the relationship between fluctuations and equations of motion in the presence of activity, generalizing the standard fluctuation-dissipation relations characteristic of passive systems.

Introduction

Active matter is a broad area of study that encompasses biological and synthetic systems that exist far from thermodynamic equilibrium [1]. Such systems consume energy and convert it into mechanical work, which allows for self-propulsion. In this way, all biological systems fall under the active matter umbrella [2]. The nature of this energy source can vary from system to system. In many biological examples, energy is stored in chemical bonds and is then released to perform work—this is how we are able to move the muscles in our bodies. But the energy source could be something entirely different, like a light that shines on an active sample [3].

Apart from being the fundamental physical principle that undergirds all of life, active matter systems offer an intriguing space for exploring non-equilibrium physics in a broader context [4]. There are various theoretical questions that accompany the study of active systems. When constructing a theory of a passive system, principles of local equilibrium can be invoked that constrain both the equations of motion and the statistical fluctuations [5].

When studying active systems, however, it is not so clear how principles of local equilibrium are relevant. On the one hand, active systems are very far from equilibrium—they continually consume energy and use it to move. On the other hand, notions like temperature or chemical potential—hydrodynamic quantities that are only well-defined in equilibrium [6]—are often relevant. So while in the most general case in which we are totally agnostic about the origin of activity, no notion of local equilibrium can be universally defined, in many real-world applications, some notion of local equilibrium must persist.

The particular system we will focus on is active nematics in two spatial dimensions. These are apolar liquid crystal systems consisting of elongated molecules that spontaneously break spatial rotation symmetry [7]. They consume energy from their surroundings and convert it into mechanical work [8, 9]. Active two-dimensional nematic order has been identified in numerous biological systems. These systems encompass a variety of phenomena, such as epithelial monolayers [10, 11, 12] and suspensions of cytoskeletal filaments [13, 14]. On the theoretical front, much attention has been paid to topological defects [15, 16, 17, 18, 19] and resulting nematic “turbulence,” which occurs when the complex dynamics of topological defects are driven by strong active elastic distortions of the nematic substrate [20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31].

The aim of this paper is to extend the effective field theory (EFT) paradigm to account for activity, focusing on nematics in two dimensions. In the passive case, techniques for constructing actions on the Schwinger-Keldysh (SK) contour that account for the non-equilibrium dynamics of many body systems—including nematics—have been well-studied [32, 33, 34]. An important element of passive dynamics is the dynamical KMS symmetry [35, 36, 37, 38]. This is a symmetry of the action that implements both local thermal equilibrium and microscopic time-reversibility. It ensures that the correlation functions of observables satisfy the KMS conditions, which are real-time constraints that define thermal equilibrium. The primary obstacle to constructing active EFTs is that dynamical KMS symmetry appears to automatically ensure passive dynamics. So how can any notion of local equilibrium be implemented if activity is present? To answer this question we we will investigate two approaches:

  1. The most straight-forward approach is to maintain the usual dynamical KMS symmetry, but couple the passive system to a far-from-equilibrium sector. For example, we could introduce a U(1)U(1) charge that very slowly decays. This might represent e.g. a slow chemical reaction like the consumption of ATP that drives activity in a cell. Such an approach gives a clear account of the origin of activity at the price of being model-dependent.

  1. To construct a more model-independent active EFT, we would like to modify the dynamical KMS relations in such a way that active dynamics emerge. Note that we could simply do away with dynamical KMS symmetry entirely, but this would remove all notion of local equilibrium, which as discussed previously, is undesirable. We will therefore take inspiration from the above approach and propose such a modified dynamical KMS symmetry.

The paper is organized as follows. In Section II we review how to construct non-equilibrium EFTs on the SK contour for passive nematics. Working first in the probe limit, we show how the EFT can be modified to include passive velocities in open systems. Next, in Section III we couple the passive action to a far-from-equilibrium sector that drives activity in the system. We find a leading-order correction to the usual active constitutive relation for the velocity. Then, taking inspiration from this EFT, we propose a modification to dynamical KMS symmetry in Section IV. And finally in Section V we discuss the implications and generalizations for such active EFTs.

Passive dynamics

Before investigating the active case, we begin by considering passive dynamics for nematics in two spatial dimensions. As a particularly simple example, we begin with the probe limit in which the only degree of freedom is the Goldstone corresponding to spontaneously broken rotations.1 Unfortunately, such an EFT has no notion of local velocity, so endowing it with activity directly would be tricky. Moreover, introducing local velocity is typically accomplished by considering the conservation of the stress-energy tensor. But in active systems, energy and momentum can be exchanged with the environment, so it ought not be conserved. To fix these problems, we propose a way to introduce dynamical velocity without conserving the stress-energy tensor, which will ultimately make including activity quite easy.

Probe limit

A nematic liquid crystal consists of oblong molecules that spontaneously break spatial rotation symmetry, but leave space and time translations unbroken. As a result, in the infrared, the only relevant degrees of freedom are the rotation Goldstone θ\theta and its aa-type partner θa\theta_a. It is convenient to define the vector pointing parallel to the oblong molecules by n⃗=(cos⁡θ,sin⁡θ)\vec{n} = (\cos\theta,\sin\theta). In nematic phase, flipping the oblong molecules by 180 degrees leaves the system unchanged, so we postulate the Z2Z_2 symmetry n⃗→−n⃗\vec{n} \to-\vec{n}. It is sometimes convenient to work with the symmetric, traceless tensor Qij=ninj−12δijQ^{ij} = n^i n^j - \frac{1}{2}\delta^{ij}, which is invariant under this Z2Z_2 symmetry.

Suppose the system exists at fixed finite temperature T0=1/β0T_0 = 1/\beta_0. The effective action IEFT[θ,θa]I_{\mathrm{EFT}}[\theta,\theta_a] for the rotation Goldstones can be constructed using the framework of [32, 35, 36, 37, 38]. In particular, it must satisfy the following conditions:

  1. It enjoys translational invariance in xμ=(t,xi)x^\mu= (t,x^i) and rotational invariance on xix^i coordinates. The latter symmetry acts non-trivially on the Goldstone by

xi→Rij(ϕ)xj,θ→θ+ϕ,R(ϕ)∈SO(2).(1)x^i \to R^{ij}(\phi)x^j,\quad\theta\to\theta+ \phi,\quad R(\phi) \in SO(2). \tag*{(1)}
  1. There are various unitarity constraints given by

IEFT∗[θ,θa]=−IEFT[θ,−θa],(2)I_{\mathrm{EFT}}^*[\theta,\theta_a] = -I_{\mathrm{EFT}}[\theta,-\theta_a], \tag*{(2)}
Im⁡IEFT≥0,(3)\operatorname{Im} I_{\mathrm{EFT}} \ge0, \tag*{(3)}
IEFT[θ,θa=0]=0.(4)I_{\mathrm{EFT}}[\theta,\theta_a = 0] = 0. \tag*{(4)}

simplicity, however, we will merely circumvent this issue by refraining from computing loop diagrams.

These constraints will be straightforwardly generalized when other fields are included.

  1. It is invariant under dynamical KMS transformations, that is IEFT[θ,θa]=IEFT[θ~,θ~a]I_{\mathrm{EFT}}[\theta,\theta_a]=I_{\mathrm{EFT}}[\tilde{\theta},\tilde{\theta}_a], where dynamical KMS symmetry is a Z2\mathbb{Z}_2 transformation of the form

θ~=Θθ,θ~a=Θθa+iβ0Θ∂tθ.(5)\tilde{\theta}=\Theta\theta,\qquad\tilde{\theta}_a=\Theta\theta_a+i\beta_0\Theta\partial_t\theta. \tag*{(5)}

Here Θ\Theta is a discrete anti-unitary, time-reversing symmetry of the microscopic theory. For example it could be Θ=T\Theta=\mathcal{T} or Θ=CPT\Theta=\mathcal{CPT}. Dynamical KMS symmetry in conjunction with the unitarity constraints (2)–(4) can be used to deduce an entropy current sμs^\mu with non-negative divergence ∂μsμ≥0\partial_\mu s^\mu\ge0. That is, the second law of thermodynamics follows automatically [36].

  1. Impose whatever other discrete symmetries are formed from charge conjugation C\mathcal{C} and parity P\mathcal{P} that are preserved by the underlying microscopic system. For the purposes of this paper, C\mathcal{C} symmetry is irrelevant as there are no objects that carry fundamental charge and we will always impose P\mathcal{P} symmetry.

Effective actions are organized as derivative expansions, so we must assign weights to derivatives and fields. In the probe limit, boosts are explicitly broken, so spatial and temporal derivatives need not be on equal footing. It will turn out that the leading-order dynamics of passive nematics are diffusive, suggesting the weight-assignments [∂t]=2[∂i]=2[\partial_t]=2[\partial_i]=2. Additionally, as θ∈[0,2π)\theta\in[0,2\pi) it ought to have a weight of zero. Finally, as dynamical KMS symmetry relates θa\theta_a to ∂tθ\partial_t\theta, we assign θa\theta_a a weight of two so that this symmetry does not mix terms of differing weights.

The symmetry-invariant building-blocks are as follows. Notice that while θ\theta shifts under rotations, θa\theta_a does not. As a result, θa\theta_a can appear on its own without derivatives. Next, the temporal derivative ∂tθ\partial_t\theta is manifestly rotation-invariant. To take spatial derivatives, define the covariant derivatives

∇1θ=n⃗⋅∇⃗θ,∇1θa=−θan⃗×∇⃗θ+n⃗⋅∇⃗θa.(6)\nabla_1\theta=\vec{n}\cdot\vec{\nabla}\theta,\qquad\nabla_1\theta_a=-\theta_a\vec{n}\times\vec{\nabla}\theta+\vec{n}\cdot\vec{\nabla}\theta_a. \tag*{(6)}
∇2θ=n⃗×∇⃗θ,∇2θa=θan⃗⋅∇⃗θ−n⃗×∇⃗θa.(7)\nabla_2\theta=\vec{n}\times\vec{\nabla}\theta,\qquad\nabla_2\theta_a=\theta_a\vec{n}\cdot\vec{\nabla}\theta-\vec{n}\times\vec{\nabla}\theta_a. \tag*{(7)}

The covariant derivatives’ actions on θa\theta_a are defined in such a way that dynamical KMS symmetry can be easily implemented [32, 39]. Lastly, it is often convenient to define θ^a=θa+iβ0∂tθ\hat{\theta}_a = \theta_a + i\beta_0\partial_t\theta.

We are now in a position to construct the leading-order action, which includes only weight-4 terms given by

L=iγβ0θaθ^a−K1∇1θ∇1θa−K2∇2θ∇2θa.(8)\mathcal{L} = \frac{i\gamma}{\beta_0}\theta_a\hat{\theta}_a - K_1\nabla_1\theta\nabla_1\theta_a - K_2\nabla_2\theta\nabla_2\theta_a. \tag*{(8)}

Here γ\gamma and the Frank coefficients K1,2K_{1,2} are constants; (3) requires that γ>0\gamma> 0 and requiring a stable free energy implies K1,2>0K_{1,2} > 0. In the literature it is common to make the so-called one-constant approximation, which means we fix K≡K1=K2K \equiv K_1 = K_2 [40]. The Lagrangian becomes

L1-const.=iγβ0θaθ^a−K∂iθ∂iθa,(9)\mathcal{L}_{\text{1-const.}} = \frac{i\gamma}{\beta_0}\theta_a\hat{\theta}_a - K\partial_i\theta\partial_i\theta_a, \tag*{(9)}

whose equations of motion yield simple diffusion

∂tθ=D∇⃗ 2θ,D=Kγ.(10)\partial_t\theta= D\vec{\nabla}^{\,2}\theta,\qquad D = \frac{K}{\gamma}. \tag*{(10)}

Working with K1≠K2K_1 \ne K_2, the equations of motion become a bit more complicated

γ∂tθ=(K1−K2)∇1θ∇2θ+K1∇⃗⋅(n⃗∇1θ)−K2∇⃗×(n⃗∇2θ).(11)\gamma\partial_t\theta= (K_1-K_2)\nabla_1\theta\nabla_2\theta+ K_1\vec{\nabla}\cdot(\vec{n}\nabla_1\theta) - K_2\vec{\nabla}\times(\vec{n}\nabla_2\theta). \tag*{(11)}

The non-Stückelberg trick

The EFT in the previous subsection is sufficient to describe passive dynamics in the probe limit. In this limit, there is no notion of velocity. When we generalize to the active case, however, including a velocity will be crucial. It is the aim of this subsection to propose how to include a velocity even when the system is open, meaning that the stress-energy tensor is not conserved.

When the stress-energy tensor is conserved, we typically introduce metric sources gμνg_{\mu\nu}, gaμνg_{a\mu\nu} and corresponding Stückelberg fields Xμ(σ)X^\mu(\sigma), Xaμ(σ)X_a^\mu(\sigma) defined on the auxiliary coordinates σμ\sigma^\mu. In the classical limit, we can perform a coordinate transformation so that the action is defined on the physical spacetime coordinates xμ=Xμx^\mu= X^\mu at the price of promoting σM\sigma^M to dynamical fields. The Stückelberg fields must appear in the packages

Gaμν=gaμν+LXagμν,(12)G_{a\mu\nu}=g_{a\mu\nu}+\mathcal{L}_{X_a}g_{\mu\nu}, \tag*{(12)}

where Lξ\mathcal{L}_{\xi} is the Lie derivative with respect to ξ\xi, and all free Lorentz indices must be contracted with gμνg_{\mu\nu}. Finally, when spacetime translations are unbroken the EFT typically enjoys time-independent diffs

σ0→σ0+f(σi),σi→Σi(σj).(13)\sigma^0\to\sigma^0+f(\sigma^i),\qquad\sigma^i\to\Sigma^i(\sigma^j). \tag*{(13)}

In the active case, we will want an EFT that has active velocity, but fixed background temperature T0=1/β0T_0=1/\beta_0. As a result, we have no need of the temporal Stückelberg fields above, so we fix σ0=t\sigma^0=t and Xat=0X_a^t=0. The local velocity field is given by

vi≡JiJt,Jμ=ϵμνλρ∂νσ1∂λσ2∂ρσ3.(14)v^i\equiv\frac{J^i}{J^t},\qquad J^\mu=\epsilon^{\mu\nu\lambda\rho}\partial_\nu\sigma^1\partial_\lambda\sigma^2\partial_\rho\sigma^3. \tag*{(14)}

Next, active systems are open, so the stress-energy tensor cannot be conserved. We thus must suppose that Xai,σiX_a^i,\sigma^i are not true Stückelberg fields. Nevertheless, if the non-conservation of the stress-energy tensor is too severe then the energy given to the system by the fuel-source will be dissipated rapidly and will not lead to activity. Therefore we must suppose that the stress-energy tensor is only weakly non-conserved. As a result, we shall treat Xai,σiX_a^i,\sigma^i as approximate Stückelberg fields [39, 41]. To this end, decompose the Lagrangian by

L=L(non)+L(Stu¨c),(15)\mathcal{L}=\mathcal{L}^{(\mathrm{non})}+\mathcal{L}^{(\mathrm{St\"uc})}, \tag*{(15)}

where L(non)\mathcal{L}^{(\mathrm{non})} contains non-Stückelberg terms, e.g. XaiX_a^i without derivatives; while L(Stu¨c)\mathcal{L}^{(\mathrm{St\"uc})} contains only Stückelberg terms. As Xai,σiX_a^i,\sigma^i are approximate Stückelberg fields, we suppose that L(non)\mathcal{L}^{(\mathrm{non})} is small even when it is lower-order in the derivative expansion.

Now that the system has a non-trivial velocity, the dynamical KMS transformations must be modified. We have in particular

θ~=Θθ,σ~i=Θσi,θ~a=Θθa+iβ0ΘDtθ,X~ai=ΘXai+iβ0Θvi,(16)\widetilde{\theta}=\Theta\theta,\qquad\widetilde{\sigma}^i=\Theta\sigma^i,\qquad\widetilde{\theta}_a=\Theta\theta_a+i\beta_0\Theta D_t\theta,\qquad\widetilde{X}_a^i=\Theta X_a^i+i\beta_0\Theta v^i, \tag*{(16)}

where Dt≡∂t+v⃗⋅∇⃗D_t \equiv\partial_t + \vec{v} \cdot\vec{\nabla} is the material derivative. To assign weights to the fields we follow the power-counting scheme of the previous subsection [∂t]=2[∂i]=[θa]=2[\partial_t] = 2[\partial_i] = [\theta_a] = 2 and [θ]=0[\theta] = 0. To ensure that dynamical KMS symmetry does not mix terms of different weights, it is natural to suppose [vi]=[Xai]=1[v^i] = [X_a^i] = 1.

Begin by constructing the non-Stückelberg sector. The leading-order terms are of weight-2, given by

L(non)=iΛij−1β0XaiX^aj,X^ai=Xai+iβ0vi,Λij=Λ0δij+ΛQQij.(17)\mathcal{L}^{(\mathrm{non})} = \frac{i\Lambda^{-1}_{ij}}{\beta_0}X_a^i\widehat{X}_a^j,\qquad\widehat{X}_a^i = X_a^i + i\beta_0 v^i,\qquad\Lambda^{ij} = \Lambda_0\delta^{ij} + \Lambda_Q Q^{ij}. \tag*{(17)}

Let us now make use of field redefinitions. We may redefine XaiX_a^i by

Xai→Xai+ifai,(18)X_a^i \rightarrow X_a^i + if_a^i, \tag*{(18)}

where faif_a^i is an (almost) arbitrary higher-weight vector. Such a field redefinition must however yield an action that is consistent with (2)–(4). As a result, faif_a^i must be at least linear in aa-type fields and each occurrence of an aa-type field must be accompanied by a factor of ii. Further to keep the representation of dynamical KMS symmetry manifest require the accompanying transformation [42]

vi→vi+β0−1(fai−Θf~ai).(19)v^i \rightarrow v^i + \beta_0^{-1}(f_a^i - \Theta\widetilde{f}_a^i). \tag*{(19)}

The equations of motion for XaiX_a^i yield

∂μTμi=Γi,Γi=Λij−1vj+⋯(20)\partial_\mu T^{\mu i} = \Gamma^i,\qquad\Gamma^i = \Lambda^{-1}_{ij}v^j + \cdots \tag*{(20)}

where TμiT^{\mu i} is furnished by the Stückelberg action (see below) and Γi\Gamma^i by the non-Stückelberg action. Notice that redefinitions of XaiX_a^i and the corresponding induced redefinitions (19) have just enough degrees of freedom to ensure that Γi\Gamma^i has no higher-order corrections. Thus, we may use field redefinitions to remove all higher-order corrections to L(non)\mathcal{L}^{(\mathrm{non})}. These redefinitions cannot be used to remove any terms in TμiT^{\mu i} as L(non)\mathcal{L}^{(\mathrm{non})} is small even when it is lower-order in the derivative expansion. Further, we have no left-over field redefinitions to apply to the Stückelberg sector. As a result, L(Stu¨c)\mathcal{L}^{(\mathrm{Stüc})} cannot be modified by field redefinitions of XaiX_a^i, viv^i.

Now let us construct L(Stu¨c)\mathcal{L}^{(\mathrm{St\ddot{u}c})}. Turning off external sources, the covariant building-blocks are

Gati=∂tXai,Gaij=∂iXaj+∂jXai,(21)G_{ati}=\partial_t X_{ai},\qquad G_{aij}=\partial_i X_{aj}+\partial_j X_{ai}, \tag*{(21)}
ϑa=θa−12∇⃗×X⃗a,ϑ^a=ϑa+iβ0Dtϑ,(22)\vartheta_a=\theta_a-\frac{1}{2}\vec{\nabla}\times\vec{X}_a,\qquad\hat{\vartheta}_a=\vartheta_a+i\beta_0D_t\vartheta, \tag*{(22)}
∇1θ=n⃗⋅∇⃗θ,∇1θa=−θan⃗×∇⃗θ+n⃗⋅∇⃗θa−n⃗⋅∇⃗Xai∂iθ,(23)\nabla_1\theta=\vec{n}\cdot\vec{\nabla}\theta,\qquad\nabla_1\theta_a=-\theta_a\vec{n}\times\vec{\nabla}\theta+\vec{n}\cdot\vec{\nabla}\theta_a-\vec{n}\cdot\vec{\nabla}X_a^i\partial_i\theta, \tag*{(23)}
∇2θ=n⃗×∇⃗θ,∇2θa=θan⃗⋅∇⃗θ−n⃗×∇⃗θa+n⃗×∇⃗Xai∂iθ,(24)\nabla_2\theta=\vec{n}\times\vec{\nabla}\theta,\qquad\nabla_2\theta_a=\theta_a\vec{n}\cdot\vec{\nabla}\theta-\vec{n}\times\vec{\nabla}\theta_a+\vec{n}\times\vec{\nabla}X_a^i\partial_i\theta, \tag*{(24)}

where Dtϑ≡Dtθ−12ωD_t\vartheta\equiv D_t\theta-\frac{1}{2}\omega, with ω=∇⃗×v⃗\omega=\vec{\nabla}\times\vec{v} the pseudo-scalar vorticity. These building-blocks can be identified using the coset construction [32, 39, 43]. We can now construct the Stückelberg sector Lagrangian

L(Stu¨c)=iγβ0ϑaϑ^a−K1∇1θ∇1θa−K2∇2θ∇2θa+12T0ijGaij+TtiGati+i4β0WijklGaijG^akl,(25)\mathcal{L}^{(\mathrm{St\ddot{u}c})}=\frac{i\gamma}{\beta_0}\vartheta_a\hat{\vartheta}_a-K_1\nabla_1\theta\nabla_1\theta_a-K_2\nabla_2\theta\nabla_2\theta_a+\frac{1}{2}T_0^{ij}G_{aij}+T^{ti}G_{ati}+\frac{i}{4\beta_0}W^{ijkl}G_{aij}\hat{G}_{akl}, \tag*{(25)}

for T0ij=p0δij+w0vivj+12w0v2δijT_0^{ij}=p_0\delta^{ij}+w_0v^iv^j+\frac{1}{2}w_0v^2\delta^{ij}, Tti=w~0viT^{ti}=\tilde{w}_0v^i, and

Wijkl=2η∥Δi(kΔl)j+(ζ⊥−2dη∥)ΔijΔkl+4η∥n(iΔj)(knl)+(ζ×−2dη∥)(Δijnknl+Δklninj)+ζ∥ninjnknl,(26)W^{ijkl}=2\eta_{\parallel}\Delta^{i(k}\Delta^{l)j}+\left(\zeta_{\perp}-\frac{2}{d}\eta_{\parallel}\right)\Delta^{ij}\Delta^{kl}+4\eta_{\parallel}n^{(i}\Delta^{j)(k}n^{l)} +\left(\zeta_{\times}-\frac{2}{d}\eta_{\parallel}\right)\left(\Delta^{ij}n^kn^l+\Delta^{kl}n^in^j\right)+\zeta_{\parallel}n^in^jn^kn^l, \tag*{(26)}

where Δij=δij−ninj\Delta^{ij}=\delta^{ij}-n^in^j. The coefficients γ\gamma, K1,2K_{1,2}, p0p_0, w0w_0, w~0\tilde{w}_0, η∥,⊥\eta_{\parallel,\perp}, ζ∥,⊥,×\zeta_{\parallel,\perp,\times} are all constant. Physically, η∥,⊥\eta_{\parallel,\perp} are shear viscosities, and ζ∥,⊥,×\zeta_{\parallel,\perp,\times} are bulk viscosities, K1,2K_{1,2} are the Frank constants, and p0p_0 is the pressure. With boost symmetry restored, w0w_0, w~0\tilde{w}_0 would coincide and equal the enthalpy density. The unitarity constraint (3) give positivity conditions on the dissipative transport coefficients, namely

γ>0,Λ0>0,ΛQ2<Λ02,ζ∥,⊥>0,η∥,⊥>0,ζ∥ζ⊥>ζ×2,(27)\gamma>0,\qquad\Lambda_0>0,\qquad\Lambda_Q^2<\Lambda_0^2,\qquad\zeta_{\parallel,\perp}>0,\qquad\eta_{\parallel,\perp}>0,\qquad\zeta_{\parallel}\zeta_{\perp}>\zeta_{\times}^2, \tag*{(27)}

and requiring the stability of the free energy implies K1,2≥0K_{1,2}\ge0.

The equation of motion for θa\theta_a is

γDtϑ=(K1−K2)∇1θ∇2θ+K1∇⃗⋅(n⃗∇1θ)−K2∇⃗×(n⃗∇2θ),(28)\gamma D_t\vartheta=(K_1-K_2)\nabla_1\theta\nabla_2\theta+K_1\vec{\nabla}\cdot(\vec{n}\nabla_1\theta)-K_2\vec{\nabla}\times(\vec{n}\nabla_2\theta), \tag*{(28)}

which is simply (11) modified to include a velocity. Next, the equations of motion for XaiX_a^i give the non-conservation equation (20) where Γi=Λij−1wj\Gamma^i = \Lambda^{-1}_{ij}w^j, Tti=w~0viT^{ti} = \widetilde{w}_0v^i and

Tij=p0δij+w0vivj+12w0v2δij−K1∇1θn(i∂j)−K2∇2θnkκk(i∂j)θ−W0ijkl∂kvl.(29)T^{ij} = p_0\delta^{ij} + w_0v^iv^j + \frac{1}{2}w_0v^2\delta^{ij} - K_1\nabla_1\theta n^{(i}\partial^{j)} - K_2\nabla_2\theta n^k\kappa^{k(i}\partial^{j)}\theta- W_0^{ijkl}\partial_kv_l. \tag*{(29)}

In the linearized limit, viv^i exponentially decays to zero. In the deep infrared, the leading-order equation of motion simply fixes vi=0v^i = 0. Similarly the leading-order equation of motion for σi\sigma^i is Xai=0X_a^i = 0. Plugging these back into the EFT yields (8).

Active dynamics with fuel

To introduce activity to the nematic system described in the previous section, we simply couple it to a far-from-equilibrium sector. This sector will be described by a non-conserved U(1)U(1) charge that begins at a large value and slowly decays, which models the burning of fuel. Active dynamics will take place on time scales much longer than the collision time, but much shorter than the decay time for the fuel. To ensure that such an intermediate regime exists and is large, we suppose that the fuel is described by approximate Stückelberg fields φ\varphi, φa\varphi_a.

We follow the formalism of [41]. If the fuel were exactly conserved, then we would introduce background U(1)U(1) gauge sources aμa_\mu, aaμa_{a\mu} such that φ\varphi, φa\varphi_a would always appear in the packages

Aμ=aμ+∂μφ,Aaμ=aaμ+LXaaμ+∂μφ.(30)A_\mu= a_\mu+ \partial_\mu\varphi,\qquad A_{a\mu} = a_{a\mu} + \mathcal{L}_{X_a}a_\mu+ \partial_\mu\varphi. \tag*{(30)}

To ensure that this U(1)U(1) charge exists in normal (i.e. unbroken) phase, impose the time-independent shift symmetries [44]

φ→φ+g(σi).(31)\varphi\to\varphi+ g(\sigma^i). \tag*{(31)}

It is convenient to define the local chemical potential2

μ=Dtφ,Dt=∂t+v⃗⋅∇⃗,(32)\mu= D_t\varphi,\qquad D_t = \partial_t + \vec{v}\cdot\vec{\nabla}, \tag*{(32)}

which is manifestly invariant under (31).

As this U(1)U(1) charge is not actually conserved, and φ,φa\varphi,\varphi_a are only approximate Stückelberg symmetries, we can decompose the Lagrangian by (15). Like before, L(non)\mathcal{L}^{(\mathrm{non})} is considered small.

Dynamical KMS symmetry acts by (16) and

φ~=Θφ,φ~a=Θφa+iβ0Θμ.(33)\widetilde{\varphi}=\Theta\varphi,\qquad\widetilde{\varphi}_a=\Theta\varphi_a+i\beta_0\Theta\mu. \tag*{(33)}

We want the chemical potential to begin at a rather large value, so we suppose that μ\mu has a weight of zero, meaning that φa\varphi_a also has a weight of zero.

Let us begin by constructing the non-Stückelberg Lagrangian. It is given by

L(non)=ibβ0φaφ^a+iΛij−1βXaiX^aj,Λij=Λ0δij+ΛQQij,(34)\mathcal{L}^{(\mathrm{non})}=\frac{i b}{\beta_0}\varphi_a\widehat{\varphi}_a+\frac{i\Lambda^{-1}_{ij}}{\beta}X_a^i\widehat{X}_a^j,\qquad\Lambda^{ij}=\Lambda_0\delta^{ij}+\Lambda_Q Q^{ij}, \tag*{(34)}

where φ^a=φa+iβ0μ\widehat{\varphi}_a=\varphi_a+i\beta_0\mu. Here b,Λ0,Qb,\Lambda_{0,Q} are functions of μ\mu.3 Like the non-Stückelberg action discussed in the previous section, field redefinitions can be used to ensure that there are no higher-order corrections to this sector. These field redefinitions cannot be used to remove any terms from L(Stu¨c)\mathcal{L}^{(\mathrm{Stüc})} as L(non)\mathcal{L}^{(\mathrm{non})} is considered small. Further, all field redefinitions have been used up, so terms of L(Stu¨c)\mathcal{L}^{(\mathrm{Stüc})} that under ordinary circumstances could be removed via field redefinition, can no longer be removed. This fact will have important consequences.

Let us now turn attention to the Stückelberg terms. When external sources are turned off, in addition to the building-blocks (21)–(24), we have

μ,Aa=Dtφa,Aai,A^a=Aa+iβ0Dtμ,A^ai=Aai+iβ0∂iμ.(35)\mu,\qquad A_a=D_t\varphi_a,\qquad A_{ai},\qquad\widehat{A}_a=A_a+i\beta_0D_t\mu,\qquad\widehat{A}_{ai}=A_{ai}+i\beta_0\partial_i\mu. \tag*{(35)}

The Stückelberg Lagrangian up to weight-4 terms is

L(Stu¨c)=iγβ0ϑaϑ^a−K1∇1θ∇1θa−K2∇2θ∇2θa+TtiGati+12T0ijGaij+n0Aa+iσijβ0A^aiA^aj+iκij2β0(GaijA^a+G^aijAa)+i4β0WijklGaijG^akl.(36)\mathcal{L}^{(\mathrm{Stüc})}=\frac{i\gamma}{\beta_0}\vartheta_a\widehat{\vartheta}_a-K_1\nabla_1\theta\nabla_1\theta_a-K_2\nabla_2\theta\nabla_2\theta_a+T^{ti}G_{ati}+\frac{1}{2}T_0^{ij}G_{aij}+n_0A_a +\frac{i\sigma^{ij}}{\beta_0}\widehat{A}_{ai}\widehat{A}_{aj}+\frac{i\kappa^{ij}}{2\beta_0}\left(G_{aij}\widehat{A}_a+\widehat{G}_{aij}A_a\right)+\frac{i}{4\beta_0}W^{ijkl}G_{aij}\widehat{G}_{akl}. \tag*{(36)}

where T0ij=p0δij+w0vivj+12w0v2δijT_0^{ij}=p_0\delta^{ij}+w_0v^iv^j+\frac{1}{2}w_0v^2\delta^{ij}, Tti=w~0viT^{ti}=\tilde{w}_0v^i, such that

w0−w~0=const.,n0=−∂F∂μ,(37)w_0-\tilde{w}_0=\mathrm{const.}, \qquad n_0=-\frac{\partial\mathcal{F}}{\partial\mu}, \tag*{(37)}

for free energy4

F=−p0(μ)−12w0(μ)v2+12K1(μ)(∇1θ)2+12K2(μ)(∇2θ)2.(38)\mathcal{F}=-p_0(\mu)-\frac{1}{2}w_0(\mu)v^2+\frac{1}{2}K_1(\mu)(\nabla_1\theta)^2+\frac{1}{2}K_2(\mu)(\nabla_2\theta)^2. \tag*{(38)}

Stability of the free energy requires K1,2≥0K_{1,2}\ge0. All coefficients are functions of μ\mu and we can decompose various tensor quantities by

σij=σ0δij+σQQij,κij=κ0δij+κQQij,(39)\sigma^{ij}=\sigma_0\delta^{ij}+\sigma_QQ^{ij}, \qquad\kappa^{ij}=\kappa_0\delta^{ij}+\kappa_QQ^{ij}, \tag*{(39)}

and W0ijklW_0^{ijkl} is given by (26). The unitarity constraint (3) places positivity conditions on dissipative transport coefficients (27) and

σ0>0,κ0>0,σQ2<4σ02,κQ2<4κ02.(40)\sigma_0>0,\qquad\kappa_0>0,\qquad\sigma_Q^2<4\sigma_0^2,\qquad\kappa_Q^2<4\kappa_0^2. \tag*{(40)}

Physically, σ0,Q\sigma_{0,Q} are conductivities, η∥,∥\eta_{\parallel,\parallel} are shear viscosities, and ζ∥,∥,×\zeta_{\parallel,\parallel,\times} are bulk viscosities. The coefficients κ0,Q\kappa_{0,Q} modify both the stress and the local fuel density n0n_0. Notice that if the U(1)U(1) charge were conserved, we could work in Landau frame, thereby removing such terms. However, we already used up all field redefinitions for φ\varphi, φa\varphi_a and σi\sigma^i, XaiX_a^i in the non-Stückelberg sector, making Landau frame impossible.5 As a result, this term is in fact physical. This point is crucial as the κQ\kappa_Q-term modifies the stress by an amount proportional to QijQ^{ij}, which is the hallmark of activity in nematics [9].

Let us now investigate how this action gives rise to active dynamics. We will consider the equations of motion in the “slow roll” regime in which μ\mu begins with a large and spatially homogeneous value and decays slowly. We further suppose that gradients in μ\mu remain negligible. In this regime, the equations of motion for φa\varphi_a are

∂tμ=−μτ+⋯ ,τ=χb,χ≡∂n0∂μ,(41)\partial_t\mu=-\frac{\mu}{\tau}+\cdots,\qquad\tau=\frac{\chi}{b},\qquad\chi\equiv\frac{\partial n_0}{\partial\mu}, \tag*{(41)}

where ⋯\cdots represent higher-order corrections. We therefore see that μ\mu has instantaneous decay rate τ\tau. As L(non)\mathcal{L}^{(\mathrm{non})} is small, we must take bb small, meaning that τ\tau is large, as expected. Next, the equations of motion for XaiX^i_a give the non-conservation equation (20) where Γi=Λij−1vj\Gamma^i=\Lambda^{-1}_{ij}v^j, Tti=w~0viT^{ti}=\widetilde{w}_0v^i and

Tij=p0δij+w0vivj+12w0v2δij−K1∇1θ n(i∂j)−K2∇2θ nkek(i∂j)θ−W0ijkl∂kvl−κij∂tμ(42)T^{ij}=p_0\delta^{ij}+w_0v^iv^j+\frac{1}{2}w_0v^2\delta^{ij}-K_1\nabla_1\theta\,n^{(i}\partial^{j)}-K_2\nabla_2\theta\,n^ke^{k(i}\partial^{j)}\theta-W_0^{ijkl}\partial_kv_l-\kappa^{ij}\partial_t\mu \tag*{(42)}

Expanding κij\kappa^{ij} according to (39) we find that the κQ\kappa_Q-term augments the stress tensor with a term proportional to QijQ^{ij}, which is the hallmark of activity in nematic systems. Solving for viv^i, we find that

vi=(α0δij+αQQij)∂kQjk,α0,Q≡μκQΛ0,Qτ,(43)v^i=(\alpha_0\delta^{ij}+\alpha_QQ^{ij})\partial_kQ^{jk},\qquad\alpha_{0,Q}\equiv\frac{\mu\kappa_Q\Lambda_{0,Q}}{\tau}, \tag*{(43)}

where we have dropped higher-order terms. The equations of motion for θa\theta_a are, in the slow-roll approximation, given by (28). In conjunction with the active constitutive relation for the velocity (43), we can compare with the literature. We find that our expression for the velocity contains the standard activity α0\alpha_0 and also accounts for the anisotropic friction contribution to the activity αQ\alpha_Q, proposed in [11]. We emphasize that both of these terms contribute at the same order in the derivative expansion. As a result, unless there is fine-tuning, we cannot neglect either of these active terms. Notice that we must require τ\tau to be large for there to be a sufficiently large separation of scales for interesting active dynamics to take place. So we might expect the activity α0,Q\alpha_{0,Q} must be small. Fortunately, this is not necessary as we may start with an arbitrarily large value of μ\mu. This is to say that the total amount of energy consumed can be very large even when the percent of fuel consumed per unit time is small so long as the total amount of fuel is large.

Modified dynamical KMS symmetry

Taking inspiration from the action in the previous section, we now attempt to modify dynamical KMS symmetry to describe active systems in the slow-roll regime on time-scales over which μ\mu and ∂tμ\partial_t\mu do not change appreciably. To do this, remove φ,φa\varphi,\varphi_a from the EFT and introduce non-dynamical sources MM, MaM_a that transform under dynamical KMS symmetry by

M~=ΘM,M~a=ΘMa+iβ0ΘM.(44)\widetilde{M} = \Theta M,\qquad\widetilde{M}_a = \Theta M_a + i\beta_0\Theta M. \tag*{(44)}

Notice that there is no time-derivative acting on MM in the expression for M~a\widetilde{M}_a. As a result, we choose MM, MaM_a to have opposite transformation properties under Θ\Theta. In particular, we take ΘMa=Ma(−t,ηx⃗)\Theta M_a = M_a(-t,\eta\vec{x}) and ΘM=−M(−t,ηx⃗)\Theta M = -M(-t,\eta\vec{x}), where η=+1\eta=+1 when Θ\Theta contains no factors of P\mathcal{P} and η=−1\eta=-1 when Θ\Theta contains a factor of P\mathcal{P}. It is convenient to define M^a=Ma+iβ0M\widehat{M}_a=M_a+i\beta_0M.

The dynamical fields are now Xai,σiX_a^i,\sigma^i and θa,θ\theta_a,\theta. As Xai,σiX_a^i,\sigma^i are still only approximate Stückelberg fields, we will continue to decompose the action according to (15). The non-Stückelberg terms are

L(non)=iΛij−1βXaiX^aj,Λij=Λ0δij+ΛQQij,(45)\mathcal{L}^{(\mathrm{non})}=\frac{i\Lambda^{-1}_{ij}}{\beta}X_a^i\widehat{X}_a^j,\qquad\Lambda^{ij}=\Lambda_0\delta^{ij}+\Lambda_Q Q^{ij}, \tag*{(45)}

for constants Λ0,Q\Lambda_{0,Q}. And the Stückelberg terms are

L(Stu¨c)=iγβ0ϑaϑ^a−K1∇1θ∇1θa−K2∇2θ∇2θa+TtiGati+12T0ijGaij+iκij2β0(GaijM^a+G^aijMa)+i4β0WijklGaijG^akl.(46)\begin{aligned} \mathcal{L}^{(\mathrm{St\"{u}c})}={}&\frac{i\gamma}{\beta_0}\vartheta_a\widehat{\vartheta}_a-K_1\nabla_1\theta\nabla_1\theta_a-K_2\nabla_2\theta\nabla_2\theta_a+T^{ti}G_{ati}+\frac{1}{2}T_0^{ij}G_{aij}\\ &+\frac{i\kappa^{ij}}{2\beta_0}(G_{aij}\widehat{M}_a+\widehat{G}_{aij}M_a)+\frac{i}{4\beta_0}W^{ijkl}G_{aij}\widehat{G}_{akl}. \tag*{(46)} \end{aligned}

where W0ijklW_0^{ijkl} is given by (26), T0ij=p0δij+w0vivj+12w0v2δijT_0^{ij}=p_0\delta^{ij}+w_0v^iv^j+\frac{1}{2}w_0v^2\delta^{ij}, Tti=w~0viT^{ti}=\widetilde{w}_0v^i, and κij=κ0δij+κQQij\kappa^{ij}=\kappa_0\delta^{ij}+\kappa_QQ^{ij} with constants γ\gamma, K1,2K_{1,2}, p0p_0, w0w_0, w~0\widetilde{w}_0, κ0,Q\kappa_{0,Q}, η∥,⊥\eta_{\parallel,\perp}, ζ∥,⊥,×\zeta_{\parallel,\perp,\times}. Positivity constraints from (3) are given by (27) and (40). And requiring the free energy to be stable imposes K1,2≥0K_{1,2}\geq0.

Turning off the aa-type source Ma=0M_a=0, setting MM constant, and solving the XaiX_a^i-equations of motion for viv^i, we find

vi=(α0δij+αQQij)∂kQjk,α0,Q≡MκQΛ0,Q,(47)v^i=(\alpha_0\delta^{ij}+\alpha_QQ^{ij})\partial_kQ^{jk},\qquad\alpha_{0,Q}\equiv M\kappa_Q\Lambda_{0,Q}, \tag*{(47)}

where sub-leading terms have been dropped. We therefore see that MM is the external source for activity; taking M=0M=0 recovers the passive Lagrangian (25). The equations of motion for θa\theta_a are given by (28), which in conjunction with (47), yields active dynamics. Notice that the αQ\alpha_Q-term accounts for the effects of anisotropic friction [11].

An important note is that dynamical KMS symmetry ensures the second law of thermodynamics. That is, it provides a prescription for constructing an entropy current sμs^\mu whose on-shell divergence is non-negative, ∂μsμ≥0\partial_\mu s^\mu\ge0. This is, however, only guaranteed when all external sources are turned off, M=Ma=0M = M_a = 0. As a result, the Lagrangian constructed in this section will not satisfy the second law of thermodynamics. This finding should not be surprising: by replacing the U(1)U(1) non-conserved fuel charge with external sources, we are no longer able to keep track of the entropy produced by burning fuel.

Notice that the EFT constructed in the previous section is more complete in that it gives a detailed account of how activity is generated. While this may be good for some purposes, it also has the downside of being model-dependent. By contrast the EFT constructed here is agnostic about the mechanism of activity and is therefore model-independent. All predictions of this theory are, however, only valid up to corrections of order O(1/τ)O(1/\tau), where τ\tau is the characteristic decay time of the fuel.

Finally, it is important to note that setting MM constant and Ma=0M_a = 0 is not the only possibility for generating active dynamics. This is the correct prescription if our source of activity is a slowly decaying fuel, but in principle, activity could be generated from an inherently noisy process. In such cases, if the noise profile of the activity is known, then MM, MaM_a can be treated as stochastic variables. This stochastic behavior could lead to different relations between the equations of motion and noise profiles of the active system. In this way, such a theory will give an unambiguous generalization of the fluctuation-dissipation relations.

Discussion

In this work, we constructed non-equilibrium EFTs defined on the SK contour for active nematics. We took two approaches, one that describes a particular mechanism for activity and the other, which is more model-independent.6 Our EFTs are based entirely on symmetry principles organized in a derivative expansion that account for both classical equations of motion and statistical fluctuations about the mean. As a result, they give unambiguous predictions regarding the relationship between statistical fluctuations and classical equations of motion. That is, these EFTs generalize the famous fluctuation-dissipation relations to a wide class of active system. A potentially fruitful further direction is to study defects [15, 16, 17, 18, 19] using EFT. In particular, the language of field theory is well-suited to studying phase transitions, so EFT may shed light on the activity-induced BKT-type phase transition [45].

While we focused on constructing EFTs for active nematics, the principles exploited in this paper can be easily generalized to active systems more broadly. We propose the following prescription for constructing model-independent active actions:

  1. Identify the degrees of freedom associated with the passive system in the probe limit.

  1. Introduce non-Stückelberg fields σi,Xai\sigma^{i}, X_{a}^{i}, which describe velocity. Treat them as approximate Stückelberg fields and decompose the Lagrangain by

L=L(non)+L(Stu¨c),(48)\mathcal{L} = \mathcal{L}^{(\mathrm{non})} + \mathcal{L}^{(\mathrm{Stüc})}, \tag*{(48)}

where L(non)\mathcal{L}^{(\mathrm{non})} is small and contains non-Stückelberg terms, while L(Stu¨c)\mathcal{L}^{(\mathrm{Stüc})} contains Stückelberg terms. Suppose all fields transform under dynamical KMS symmetry in the usual way.

  1. Couple the action to active sources MM, MaM_a that transform under the dynamical KMS symmetry by

M~=ΘM,M~a=ΘMa+iβ0ΘM,(49)\widetilde{M} = \Theta M,\qquad\widetilde{M}_a = \Theta M_a + i\beta_0\Theta M, \tag*{(49)}

where MM, MaM_a transform with opposite signs under Θ\Theta.

  1. Identify a derivative power-counting scheme and construct the most general action consistent with symmetries up to a given order.

For specific models of activity, instead of introducing sources MM, MaM_a, one could couple the system to a far-from-equilibrium sector, like the non-conserved U(1)U(1) fuel charge discussed in this work.

Acknowledgments

I would like to thank Farzan Vafa and Matteo Baggioli for many insightful discussions and comments on the manuscript. This work was supported by the ALFA Foundation.

References

References

  1. [1]M. C. Marchetti, J. F. Joanny, S. Ramaswamy, T. B. Liverpool, J. Prost, M. Rao, and R. A. Simha, Rev. Mod. Phys. 85, 1143 (2013).
  2. [2]D. Needleman and Z. Dogic, Nature reviews materials 2, 1 (2017).
  3. [3]C. Bechinger, R. Di Leonardo, H. Löwen, C. Reichhardt, G. Volpe, and G. Volpe, Rev. Mod. Phys. 88, 045006 (2016).
  4. [4]S. Ramaswamy, Annual Review of Condensed Matter Physics 1, 323 (2010).
  5. [5]R. Kubo, Reports on Progress in Physics 29, 255 (1966).
  6. [6]P. Kovtun, J. Phys. A 45, 473001 (2012), arXiv:1205.5040 [hep-th].DOI
  7. [7]P. G. de Gennes and J. Prost, The physics of liquid crystals (Clarendon Press, Oxford, 1993).
  8. [8]R. A. Simha and S. Ramaswamy, Physical review letters 89, 058101 (2002).
  9. [9]A. Doostmohammadi, J. Ignés-Mullol, J. M. Yeomans, and F. Sagués, Nature Communications 9, 3246 (2018).
  10. [10]T. B. Saw, A. Doostmohammadi, V. Nier, L. Kocgozlu, S. Thampi, Y. Toyama, P. Marcq, C. T. Lim, J. M. Yeomans, and B. Ladoux, Nature 544, 212–216 (2017).
  11. [11]K. Kawaguchi, R. Kageyama, and M. Sano, Nature 545, 327–331 (2017).
  12. [12]C. Blanch-Mercader, V. Yashunsky, S. Garcia, G. Duclos, L. Giomi, and P. Silberzan, Phys. Rev. Lett. 120, 208101 (2018).
  13. [13]T. Sanchez, D. T. N. Chen, S. J. DeCamp, M. Heymann, and Z. Dogic, Nature 491, 431 (2012).
  14. [14]F. C. Keber, E. Loiseau, T. Sanchez, S. J. DeCamp, L. Giomi, M. J. Bowick, M. C. Marchetti, Z. Dogic, and A. R. Bausch, Science 345, 1135 (2014).
  15. [15]F. Vafa, M. J. Bowick, M. C. Marchetti, and B. I. Shraiman, “Multi-defect dynamics in active nematics,” (2020), arXiv:2007.02947 [cond-mat.soft].
  16. [16]F. Vafa, G. H. Zhang, and D. R. Nelson, Phys. Rev. E 106, 024704 (2022).
  17. [17]F. Vafa, Soft Matter 18, 8087 (2022).
  18. [18]F. Vafa, D. R. Nelson, and A. Doostmohammadi, Journal of Physics: Condensed Matter 35, 425101 (2023).
  19. [19]F. Vafa and L. Mahadevan, Phys. Rev. Lett. 129, 098102 (2022).
  20. [20]A. J. Tan, E. Roberts, S. A. Smith, U. A. Olvera, J. Arteaga, S. Fortini, K. A. Mitchell, and L. S. Hirst, Nature Physics 15, 1033 (2019).
  21. [21]R. Alert, J. Casademunt, and J.-F. Joanny, Annual Review of Condensed Matter Physics 13, 143 (2022).
  22. [22]L. Giomi, M. J. Bowick, X. Ma, and M. C. Marchetti, Phys. Rev. Lett. 110, 228101 (2013).
  23. [23]P. W. Ellis, D. J. Pearce, Y.-W. Chang, G. Goldsztein, L. Giomi, and A. Fernandez-Nieves, Nature Physics 14, 85 (2018).
  24. [24]S. Shankar and M. C. Marchetti, Phys. Rev. X 9, 041047 (2019).
  25. [25]E. Putzig, G. S. Redner, A. Baskaran, and A. Baskaran, Soft matter 12, 3854 (2016).
  26. [26]P. Srivastava, P. Mishra, and M. C. Marchetti, Soft matter 12, 8214 (2016).
  27. [27]A. Doostmohammadi, M. F. Adamer, S. P. Thampi, and J. M. Yeomans, Nature communications 7, 10557 (2016).
  28. [28]D. Pearce, J. Nambisan, P. Ellis, A. Fernandez-Nieves, and L. Giomi, Physical Review Letters 127 (2021), 10.1103/physrevlett.127.197801.
  29. [29]K. Thijssen, M. R. Nejad, and J. M. Yeomans, Physical Review Letters 125 (2020), 10.1103/physrevlett.125.2180
  30. [30]S. P. Thampi and J. M. Yeomans, The European Physical Journal Special Topics 225, 651 (2016).
  31. [31]L. Giomi, Physical Review X 5, 031003 (2015).
  32. [32]M. J. Landry, JHEP 07, 200 (2020), arXiv:1912.12301 [hep-th].DOI
  33. [33]M. Baggioli and M. Landry, SciPost Phys. 9, 062 (2020), arXiv:2008.05339 [hep-th].DOI
  34. [34]M. J. Landry, JHEP 04, 213 (2021), arXiv:2008.11725 [hep-th].DOI
  35. [35]M. Crossley, P. Glorioso, and H. Liu, JHEP 09, 095 (2017), arXiv:1511.03646 [hep-th].arxiv.org/abs/1511.03646
  36. [36]P. Glorioso and H. Liu, (2016), arXiv:1612.07705 [hep-th].arxiv.org/abs/1612.07705
  37. [37]P. Glorioso, M. Crossley, and H. Liu, JHEP 09, 096 (2017), arXiv:1701.07817 [hep-th].DOI
  38. [38]P. Glorioso and H. Liu, (2018), arXiv:1805.09331 [hep-th].arxiv.org/abs/1805.09331
  39. [39]M. J. Landry, (2021), arXiv:2101.02210 [hep-th].arxiv.org/abs/2101.02210
  40. [40]P. M. Chaikin and T. C. Lubensky, Principles of condensed matter physics (Cambridge university press, 2000).
  41. [41]M. J. Landry, J. Stat. Mech. 2207, 073205 (2022), arXiv:2006.13220 [hep-th].arxiv.org/abs/2006.13220
  42. [42]A. Jain, JHEP 10, 208 (2020), arXiv:2008.03994 [hep-th].DOI
  43. [43]M. J. Landry and G. Sun, JHEP 05, 040 (2021), arXiv:2010.11191 [hep-th].DOI
  44. [44]S. Dubovsky, L. Hui, A. Nicolis, and D. T. Son, Physical Review D 85 (2012), 10.1103/physrevd.85.085029.
  45. [45]S. Shankar, S. Ramaswamy, M. C. Marchetti, and M. J. Bowick, Phys. Rev. Lett. 121, 108002 (2018).

Paper details

vlnc:W_efbhy5rj
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents