WorksMathematics
Same Gaps, Different Sets: A Survey on Complimentary sets and their Dimensions
Abstract
Let a={a_n} be a non-increasing sequence of positive real numbers adding up to . Cutting out of the unit interval disjoint open gaps of lengths , one for each term, leaves a compact set of Lebesgue measure zero, and since the gaps can be placed in infinitely many ways, there are infinitely many such sets. We call them the complementary sets of and write for the family of all of them. Every set in is compact and totally disconnected, and all of them share the same gap lengths; what distinguishes one from another is only the arrangement of the gaps. Among them, the perfect sets are exactly the Cantor sets with those gaps, and they form a distinguished subclass. The central question of this survey is what such a rearrangement can change and what it cannot. The answer depends sharply on the notion of size: the box dimensions are constant on , while the Hausdorff dimension attains every value in a closed interval whose endpoints are realised by two distinguished members, the Cantor set built by placing the gaps in a Cantor-like pattern, and the countable decreasing rearrangement . We survey how this dichotomy persists, and how the roles of and are exchanged, across the intermediate dimensions of Falconer, Fraser and Kempton, the Assouad-type and -dimensions, and the Hausdorff and packing -measures associated with a general dimension function; we also describe the almost sure behaviour of a randomly rearranged complementary set, where a sharp threshold in the depth of the scales examined separates two incompatible regimes. A final part restricts attention to the Cantor subclass and turns to the dynamical description of the sets C_a.
2020 Mathematics Subject Classification. Primary 28A80; Secondary 28A78, 37C45.
The research of the authors was partially supported by Grants PIP 202287/22 (CONICET), and UBACyT 2022-154 (UBA). Nicolás Angelini was also partially supported by PROICO 3-0720 “Análisis Real y Funcional, Ec.-Diferenciales.
We thank the Fundación Williams for partially supporting our visit to IMASL.
Introduction
Start with a non-increasing sequence of positive real numbers adding up to 1, and remove from the unit interval disjoint open gaps of lengths , one for each term of the sequence. Whatever is left is a compact set of Lebesgue measure zero that contains the endpoints 0 and 1. The sequence, however, does not tell us which set we get: the same lengths can be laid out along in infinitely many ways, and each arrangement produces a different set. All these sets together form the family of complementary sets, or cut-out sets, of . Nothing is lost by this point of view: an infinite compact subset of of measure zero containing the endpoints is determined by the open intervals of its complement, so it is a complementary set of exactly one such sequence, the sequence of lengths of those intervals. This family is the object of the survey. Every member of is compact, totally disconnected and null, but it need not be perfect. The perfect members are exactly the Cantor sets with gap lengths ; they form a distinguished subclass of , and we shall restrict to it only when the mathematics requires it. Two members of are canonical. Placing the gaps in a Cantor-like pattern gives a perfect set , the Cantor set associated with ; placing them in decreasing order from one endpoint gives a countable set with a single accumulation point, which is not a Cantor set at all. Both have exactly the same gap lengths, and yet, as soon as one measures them, they could hardly be more different.
The question that organises this survey is therefore the following: given the gap lengths, what is determined for every complementary set in , and what is left free to the rearrangement? The answer depends entirely on which notion of size one uses, and the resulting picture is surprisingly varied.
Some quantities are rigid. Falconer [17] observed that all sets in have comparable covering numbers at every scale, so the upper and lower box dimensions are constant on the whole family: no rearrangement, perfect or not, can change them. Others vary as much as they possibly can. Besicovitch and Taylor [10] proved that the Hausdorff dimension of the sets in sweeps the full interval , with maximal and minimal, and that every intermediate value is attained. This contrast—one dimension constant, another taking every admissible value—is the starting point of everything that follows.
Between these two extremes lie the intermediate dimensions of Falconer, Fraser and Kempton, obtained by restricting the diameters of a cover to a geometric window governed by a parameter . Angelini and Molter [2] computed them for and and showed that these two sets again bracket the whole family , with the full interval attained for every fixed : a -parametrised version of the Besicovitch–Taylor theorem, degenerating to it at and to the rigid box dimension at .
Assouad-type dimensions reverse the picture. They record the extreme local behaviour of a set rather than its global size, and for the Assouad dimension and its upper refinements it is that minimises and that maximises over , while for the lower Assouad dimension is minimal and maximal. García, Hare and Mendivil established this for and [23] and then, through the family of -dimensions [24], for a whole one-parameter range interpolating towards the box dimensions. The same authors [25] identified a sharp threshold in the depth of the scales examined, at , separating two incompatible almost sure behaviours of a randomly chosen complementary set in : below it the Assouad dimensions are almost surely extremal regardless of , above it they almost surely agree with those of .
A further refinement replaces the exponent by a general gauge . Here the distinguished Cantor set comes to the fore. Cabrelli, Mendivil, Molter and Shonkwiler [14] showed that every sequence admits a gauge making an -set, even when no power function does, and García, Molter and Scotto [26] characterised which gauges measure and exhibited Cantor sets with the same dimension that only a gauge can tell apart. Returning to the whole family, the reversal appears once more at this finer level: Hare, Mendivil and Zuberman [27] proved that, up to multiplicative constants, has the maximal Hausdorff -measure and, simultaneously, the minimal packing -premeasure among all complementary sets in , and that the packing measures attained across the family form either or all of , with nothing in between; moreover, prescribed values of these measures can be realised by perfect sets, that is, within the Cantor subclass. Not every compact set, however, is measured by some gauge, and [13] shows that this failure is not a rarity.
The recurring theme is that and are extremal in , exactly or up to constants, for every notion of size considered here, but which of the two is the maximum depends on whether the notion is global or local, covering-based or packing-based. In most cases where a full description of the attained values is available it takes the same shape: a closed interval with endpoints at those two sets. The packing measures are the notable exception, with the all-or-nothing dichotomy described above.
So far the sequence has been treated as a purely combinatorial datum, and the results have concerned the whole family . The sequence can also be read dynamically, and for this the Cantor subclass, and in fact the single set , is the natural setting. When the gap lengths decay with enough regularity, the Cantor set turns out to be the attractor of an iterated function system, and the smoothness of that system is governed precisely by the rate of decay: García [21] showed that the sets associated with are -hyperbolic, with the optimal Hölder exponent, and characterised which central Cantor sets admit realising systems of a given smoothness. This is not a separate story. The decay condition that makes dynamically realisable is a strengthening of the condition studied in § 3, so the dynamically defined sets are among the best-behaved members of the theory developed there. In the other direction, the dynamical description gives information the sequence alone does not: through Sullivan’s scale function, a complete smooth invariant, is -conjugate to a self-similar set, and this conjugacy transports the whole theory of Bernoulli convolutions to a genuinely non-linear family.
That transport is what makes the last topic of the survey accessible. Whether the arithmetic sum of two Cantor sets on the line contains an interval, or has positive measure, is a question with a long history in dynamics, going back to Newhouse’s work on homoclinic bifurcations and to the Palis conjecture. For the family both the thickness criterion and the transversality method of Peres and Solomyak can be adapted, giving for almost every with fixed: an exact non-linear counterpart of the Peres–Shmerkin formula for self-similar sets.
The survey is organised as follows. § 2 collects the dimensions and measures used throughout: the Hausdorff, box, intermediate and Assouad-type dimensions, the -dimensions, and dimension functions with the associated Hausdorff and packing -measures. § 3 introduces the family of complementary sets, its Cantor subclass and the distinguished members and , and treats the question of what a rearrangement can and cannot change. § 4 restricts to the Cantor sets and turns to their dynamical description, and § 5 to sums of Cantor sets and thickness. The two halves are largely independent: a reader interested only in rearrangements may stop at the end of § 3, and § 4 and § 5 use from it only the -Cantor sets of Example 3.2, Theorem 3.3 and the Hausdorff and packing -measures of § 3.3. Proofs are kept to a minimum, and open problems are stated where the picture is incomplete.
Preliminaries on dimensions
Throughout, denotes the diameter of a non-empty set , and we write to mean that there exist constants , independent of , such that for all . Given , a family is a -cover of if and for all . All the sets we consider from § 3 onwards are subsets of , but the definitions below are stated in for the sake of generality.
For , and , set
The quantity is non-decreasing as decreases, so the limit
exists; it is the -dimensional Hausdorff measure of . If and is a -cover of , then , whence there is a critical exponent at which jumps from to $0. The Hausdorff dimension of is
Equivalently, and in the form that will be relevant below,
We refer to [18] for the standard properties of and ; we shall use repeatedly that countable sets have Hausdorff dimension 0.
The Hausdorff measure assigns a finite positive value to for at most one exponent , and for many sets for none at all. Replacing the power by a general gauge produces a finer scale of measures, and pairing it with the dual notion obtained from packings rather than covers gives the framework in which the sets of § 3 are best described: the pair refines the classification of Cantor sets by dimension functions (§ 3.3) and reveals an extremal reversal within (§ 3.4) that is invisible at the level of Hausdorff measure alone.
A dimension function is a map that is increasing, continuous, doubling (that is, for some constant ) and satisfies . We write for the class of all dimension functions, and for the power functions.
Definition 2.1. Given we write
and if or .
The direction of is worth emphasising: means that is of smaller order than near the origin, so that exactly when , and the ordering of gauges matches the ordering of the corresponding dimensions. The same relation controls Hausdorff and packing (pre)measures simultaneously, which is what allows estimates to be transferred from one to the other throughout.
Given and , a -covering of is a countable family of sets of diameter at most whose union contains , and a -packing of is a disjoint family of open intervals of diameter at most centred at points of . For set
and
The set function is the Hausdorff -measure. The quantity , the -packing premeasure, is not a measure, and one obtains the -packing measure by the usual regularisation
Always , and since is doubling, . Taking recovers the usual -dimensional Hausdorff and packing (pre)measures, and the index —the pre-packing dimension of —coincides with . The gap between and is not a technicality here: a countable set has zero packing measure for every , but may well have infinite premeasure.
Finally, is called an -set if , and is subadditive if for all and some constant .
Not every set is an -set; the simplest example is countable: if , then is non-atomic for every , since as , so countable additivity forces for every gauge. This example is unsatisfying, however, because is countable and hence of Hausdorff dimension 0 for trivial reasons. A genuinely fractal example is due to Best [11].
The same dichotomy appears for sets arising in Diophantine approximation. Olsen and Renfro [33] located the exact cut point between the gauges for which the set of Liouville numbers has infinite (indeed non--finite) Hausdorff -measure and those for which it has measure zero, so is not dimensional; more recently, Moreira, Erazo and Angelini [30] obtained the analogous description for the irrationals whose Lagrange value equals 3, and showed that is strictly the larger of the two on this finer scale: there are gauges with and .
Cabrelli, Darji and Molter [13] placed this question in a broader setting by allowing measures other than Hausdorff measures. A compact set in a Polish group is -visible if it is an -set for some , and visible if for some translation-invariant Borel measure , not necessarily of Hausdorff type; is strongly invisible if every translation-invariant Borel measure either vanishes on or fails to be -finite there. Not being an -set for any is thus weaker than being strongly invisible, and Best’s example is not known to be strongly invisible. Davies had already exhibited a strongly invisible compact subset of (see [15]); Cabrelli, Darji and Molter extend the construction to every uncountable abelian Polish group.
For a bounded set , let denote the smallest number of closed balls of radius needed to cover . The lower and upper box dimensions of are
and when both coincide we write for the common value. Comparing covers by balls, by grid cubes of side and by arbitrary sets of diameter at most changes only by a multiplicative constant and a bounded rescaling of , so may equally be taken to be the number of grid cubes of side meeting , the least number of sets of diameter at most covering , or the largest number of disjoint balls of radius centred in .
For bounded , the box dimensions admit a reformulation parallel to (1), in which the exponent is again characterised through covering sums rather than counting functions:
and
Two further dimensions will be needed, both of which describe the extreme local behaviour of a set rather than its global size. Given a non-empty , recall that denotes the smallest number of closed balls of radius needed to cover . The Assouad dimension of , is defined as follows
and its dual, the lower Assouad dimension is
Whereas the Hausdorff dimension records global geometric information, these two quantities record the coarser but local behaviour of , since only one ball is examined at a time. They are correspondingly sensitive to local irregularities: if has an isolated point, then . For a compact set they bracket all the dimensions considered above,
For further information on Assouad-like dimensions we refer the reader to Fraser’s book [20].
Hausdorff and box dimension formulations (1) and (2), differ in a single structural respect: the Hausdorff dimension places no constraint on the diameters of the covering sets, so that countable covers by sets of widely differing sizes are admissible, whereas the box dimensions force all the sets of the cover to have the same diameter , and hence the cover to be finite. Since the class of admissible covers is larger in (1), the infimum is smaller, and one obtains at once
inequalities which may be strict.
The two definitions therefore appear as the extreme cases of a single scheme. This is the point of view adopted by Falconer, Fraser and Kempton [19], who interpolated between them by allowing the diameters of the covering sets to range over a geometric window governed by a parameter .
Definition 2.2. Let be bounded and let . The lower -intermediate dimension of is
and the upper -intermediate dimension of is
When the two values agree we write for the common value.
With the convention , Definition 2.2 recovers the two extremes:
For the admissible covers are more numerous than those allowed in (2) and fewer than those allowed in (1), so that
and, by the same reasoning, and are non-decreasing, though not necessarily strictly increasing.
We record the properties that will be used later. Both dimensions are monotone under inclusion and invariant under bi-Lipschitz maps, and satisfy and for . The upper intermediate dimension is finitely stable,
whereas is not finitely stable, and neither dimension is countably stable. It was shown in [19] that and are continuous on ; continuity at , however, may fail, so that the intermediate dimensions need not interpolate all the way down to .
These dimensions have proved to be more than an interpolation device. Being a function rather than a number, is a finer bi-Lipschitz invariant than its endpoints: Banaji and Kolossváry [6] computed it exactly for Bedford–McMullen carpets and used it to obtain necessary conditions for Lipschitz equivalence. Its behaviour as tends to also characterises when the box dimension of a typical orthogonal projection attains its maximal value [1]. Knowing the whole spectrum therefore says more than knowing its two endpoints.
Example 2.3. Let and . Since is countable, , while . It was proved in [19] that
Here the interpolation is complete: the dimension function is continuous on all of and tends to as . In the language of § 3, is the decreasing rearrangement of the sequence , and the formula above is the case of Theorem 3.15 (ii).
Beyond these general properties, one may ask which functions of occur as intermediate dimensions. The answer, obtained by Banaji and Rutar [7], is a complete characterisation, and the constraint turns out to be governed by the two Assouad dimensions of the set.
The starting point is a quantitative bound: the intermediate dimensions cannot grow arbitrarily fast in .
Writing , and , the right-hand side is exactly the solution of
A dimension profile therefore cannot decrease faster, as decreases, than the extremal solution of this equation. This makes it natural to single out the functions satisfying the corresponding differential inequality.
Definition 2.5. For , let be the class of functions that are non-decreasing, continuous on , and satisfy
for all .
If we set .
Theorem 2.6 ([7]). Let be bounded with and . Then the functions and satisfy
Conversely, given with and , there is a compact perfect set with
Theorem 2.6 settles the question for arbitrary compact sets. The corresponding question inside a fixed family is open, and we return to it at the end of § 3.
Finally, we mention two extensions of this circle of ideas. In [5], Banaji introduced the -intermediate dimensions, in which the admissible diameters are constrained to , recovering the -intermediate dimensions for and extending the theory to general metric spaces and in [3], intermediate dimensions were defined for finite Borel measures, interpolating between the upper Hausdorff and the Minkowski dimensions of a measure.
Just as the intermediate dimensions interpolate between and , Lü and Xi [29] introduced a spectrum interpolating between the upper box dimension and the Assouad dimension. For non-empty and ,
so that . The quasi-Assouad dimension is then defined as . In general
and all the inequalities may be strict.
The Assouad dimensions admit refinements that interpolate towards the box dimensions, and these are of a different nature from the intermediate dimensions. Whereas and restrict the global range of diameters admitted in a cover, the refinements below localise around each point and each scale, in the spirit of itself. The most general such family is the one introduced by García, Hare and Mendivil [24, 25].
Definition 2.7. An admissible function is a map such that decreases as ; in particular . Given a bounded, non-empty , the upper -dimension of is
and the lower -dimension is
The choice recovers and . The constant function , , gives the Assouad spectrum of Lü and Xi, for which we write ; letting as yields the quasi-Assouad dimensions,
and their lower counterpart . For compact one has
and all the inequalities may be strict.
Cut-out sets and their rearrangements
Let be a positive, non-increasing, summable sequence with sum , and let . We denote by the family of all compact sets of the form , where is a pairwise disjoint family of open intervals contained in with for every . The sets in are called the complementary sets of . Every is compact, totally disconnected and of Lebesgue measure zero, and contains the endpoints and ; conversely, every infinite compact subset of of measure zero containing and belongs to for a unique such sequence . Note that depends only on the collection of lengths and not on the order in which they are listed, so no generality is lost in assuming non-increasing.
Two members of will play a distinguished role. The first is the countable set
a decreasing sequence of points accumulating at , whose consecutive gaps are exactly the terms of arranged in decreasing order. We call the decreasing rearrangement of .
The second is the Cantor set associated with , denoted and constructed inductively as follows. In the first step, remove from an open interval of length , leaving two closed intervals and . Having completed the -th step, we have closed intervals ; from each we remove an open interval of length , obtaining the two closed intervals and . We then set
The construction determines uniquely, since the lengths of the gaps removed on either side of a given gap are prescribed; for instance, the interval of length must be positioned so that the remaining closed interval on its left has length . The classical middle-third Cantor set is for the sequence given by when .
Since every is already compact, totally disconnected and of measure zero, such a set is homeomorphic to the classical Cantor set precisely when it is perfect. We shall accordingly refer to a perfect as a Cantor rearrangement of , reserving the notation for the particular set constructed above. Not every complementary set is of this type: consists entirely of isolated points except for .
Given a non-increasing, summable sequence , define
When the sequence is fixed and clear from context, we will simply write instead of .
Note that since is non-increasing we have the estimate
where are the closed intervals of step in the construction of the Cantor set .
Hausdorff measure and dimension
The Hausdorff dimension of the sets in was determined by Besicovitch and Taylor [10], who showed that is extremal in the family and that every smaller value is attained. Throughout we write .
Theorem 3.1 ([10]). Let be a positive, non-increasing, summable sequence. Then
and for every . Conversely, for every there is a set with . If moreover , the measure itself can be prescribed: for every and every there is with and , where
Thus , the minimum being attained by the decreasing rearrangement , which is countable and hence has Hausdorff dimension , and the maximum by . The quantity reappears in § 3.4 as the case of the estimates of García, Molter and Scotto for .
It was shown in [26] that the two lower dimensions agree on ,
which is what makes the interpolation degenerate from below in Theorem 3.15 (i).
Example 3.2 (-Cantor sets). Let and let with , normalised so that . Then and Theorem 3.1 gives . Consequently for every , and for each there is a rearrangement with and .
Dimensionality and visibility
Passing from a single exponent to a general gauge enlarges considerably the class of sets that can be assigned a finite positive size, but it does not exhaust it. Call a compact set dimensional if is an -set for some . Not every Cantor set is an -set. What is true, and this is the point of the following theorem, is that a suitable gauge always exists.
Theorem 3.3 ([14]). Let be positive, non-increasing, with , and let be the associated Cantor set. Then there is a dimension function for which is an -set; in fact may be chosen concave, and then
The gauge function is constructed explicitly from the sequence. Any with is called an associated dimension function of , and we write for any such gauge; all of them are comparable, so is well defined up to .
Packing measures and the classification of gauges
The two orderings on translate directly into statements about measures, and the translation is the same for Hausdorff measure, packing premeasure and packing measure.
Lemma 3.4 ([26]). Let denote any of , or , for , and let .
(i) If and , then .
(ii) If , then if and only if , and if and only if . In particular is an -set precisely when it is an -set, and likewise for the packing analogues.
The Besicovitch–Taylor estimates for extend to arbitrary gauges, and admit an exact packing dual.
Theorem 3.5 ([26 Prop. 4.1, Thm. 4.2]). Let be positive, non-increasing and summable, and put . Then for every ,
The two estimates differ only in the replacement of by , and of covering by packing. Since an associated dimension function satisfies , both quantities are bounded above and below, so Theorem 3.5 gives at once that and are finite and positive: the same gauge regularises the covering and the packing process simultaneously.
Combining the two halves characterises the gauges that measure , and in particular tells when the associated dimension function reduces to a power.
Theorem 3.6 ([26]). Let be non-increasing and let satisfy . Then, for every ,
In particular if and only if .
Being an -set is therefore not enough for the associated dimension function to be equivalent to a power: the condition must be supplemented by . That the extra condition is not automatic is shown by the following.
Example 3.7 ([26]). For every there is a non-increasing sequence , obtained by perturbing a geometric sequence as with a null sequence supported on alternate dyadic blocks, such that
Thus is an -set whose box dimension exists, and yet .
The gauges therefore classify these sets more finely than the exponents alone. For and , the sequence , , produces Cantor sets with irrespective of , while
satisfies , see [26 Corollary 4.8]. Ordering the pairs lexicographically, the family separates sets that the power functions cannot tell apart.
Hausdorff and packing -measures of rearrangements
The results of Section 3.3 concern the single set . We now turn to the whole family, where the natural question is how and vary across for a fixed gauge. Hare, Mendivil and Zuberman [27] extended both the Besicovitch–Taylor extremality statement and its packing dual to arbitrary , and found that the two behave in opposite ways.
The statements below are sharper than mere attainability of values: they locate the realising sets inside .
Proposition 3.8 ([27]). For , there is a constant , depending only on the doubling constant of , such that for every . That is, has, up to a constant, the maximal Hausdorff -measure within , generalising the Besicovitch–Taylor extremality result beyond power functions . When is a middle- Cantor set the constant may be taken to be , so is then exactly maximal; in general the sharp constant and the identity of a maximiser (if any exists) remain open.
Theorem 3.9 ([27]). Let , where is the associated dimension function of , and let . There is a perfect set with . Moreover the set is dense in with respect to the Hausdorff metric .
Theorem 3.9 sharpens the Besicovitch–Taylor attainability statement—that any is realised as for some —to the level of -measures rather than merely dimension values, and it guarantees that the realising set can always be chosen perfect, and in fact densely so, within .
The dual statement for packing measure exhibits the opposite extremal pattern, dual to Proposition 3.8.
Proposition 3.10 ([27]). There is a constant such that for every and every . That is, despite having the maximal Hausdorff -measure by Proposition 3.8, has—again up to a constant—the minimal packing -premeasure within . As with the Hausdorff case, the sharp constant and
the exact minimising set are unknown in general; for the middle-third Cantor set, where where , so the elementary bound is not sharp even in this classical case.
Theorem 3.11 ([27]). Let be subadditive (e.g. any equivalent to a concave function, which includes every associated dimension function ). The following are equivalent:
(i) some has ;
(ii) ;
(iii) ;
(iv) some perfect has .
Consequently is either or : there is no intermediate regime for the family of packing -measures attained across .
In particular, whenever —which always holds, since is an associated dimension function of —there exists a rearrangement with infinite -packing measure, even though itself trivially has zero packing measure (being countable) and realises the minimal packing premeasure in the family.
Theorem 3.12 ([27]). Let and . There is a perfect set with , and the set is dense in .
Remark 3.13. Propositions 3.8 and 3.10, taken together, show that the roles of and the general complementary sets are exactly reversed between the Hausdorff and packing measures: maximises the former and minimises the latter (up to uniform constants), while it is the more disordered rearrangements that can achieve arbitrarily small Hausdorff -measure or arbitrarily large—even infinite—packing -measure.
Box dimension
The box dimensions of sets in were carefully studied in [17 Chapter 3.2]. There, Falconer shows that the upper and lower box dimensions of sets in depend only on the sequence , and not on the rearrangement. That is, given any complementary set, its lower box dimension equals that of every other complementary set, and the same holds for the upper box dimension. Furthermore, for any ,
and the box dimension exists if and only if these limits coincide.
The upper and lower box dimension of (and therefore of any other complementary set in ) are given by
Moreover, it was shown in [42] that
This equivalence does not hold for the lower box dimension. In fact, the inequality
can be strict; see, for instance, [14 Proposition 5].
Intermediate dimension
In order to compute the -intermediate dimension of complementary sets, Angelini and Molter [2] introduce two auxiliary parameters. For a fixed scale , they consider coverings by sets whose diameters lie within the admissible range determined by . Specifically, the aim is to minimise the quantity
where the index ranges over all the values satisfying ; that is, over all admissible diameters that may be used to cover the set at scale , in accordance with the -intermediate dimension constraints. Since , we have
so that minimising the left-hand side over the admissible range is equivalent to minimising . This motivates the following definition.
Definition 3.14. Let be a positive, non-increasing, summable sequence, let and let . We define and as follows:
and
The following results are due to Angelini and Molter [2]. Throughout, is the parameter of Definition Definition 3.14, and we abbreviate
Theorem 3.15 (The two extremal sets). Let be positive, non-increasing and summable.
(i) If , then for every ,
(ii) For every ,
Part (i) is a genuine formula rather than a mere bound: for the lower intermediate dimension is constant in and equal to the Hausdorff dimension, so the interpolation is degenerate from below, while the upper one varies. Part (ii) requires no hypothesis on beyond summability, and the value depends on only through the box dimension, which is the same for every set in .
Theorem 3.16 (Extremality). Under the hypotheses of Theorem 3.15 (i), for every and every ,
Thus and bracket the whole family, extending to every the classical picture at , where maximises and minimises the Hausdorff dimension. The lower bounds hold for every non-increasing , with no regularity assumption.
Definition 3.17. A positive, non-increasing, summable sequence is level comparable if
equivalently, if there are constants with for all .
The right-hand inequality is automatic whenever is doubling; the content of the definition is the left-hand one, namely that the ratios stay bounded away from . For a central Cantor set it says exactly that the ratios of dissection are bounded away from and from , and it gives .
Theorem 3.18 (Full range). Let and let be level comparable. Then
Every intermediate value is therefore attained: for fixed and any in the corresponding interval there is a complementary set realising it exactly. Theorem 3.18 is the -intermediate analogue of the Besicovitch–Taylor theorem, which is the case .
Theorem 3.18 describes, for each fixed , the set of values attained across . A finer question is which functions of arise. As recalled in § 2, Banaji and Rutar [7] characterised the functions that occur as the intermediate dimensions of a bounded subset of ; combining their result with [2] suggests the following: given a fixed sequence , which functions arise as the intermediate dimension of a complementary set ?
Some partial results in that direction were obtained in [2]. If is level comparable, then for every there is a set with
so each is realised in . As the functions increase to , and as they decrease to , so the family sweeps a one-parameter curve joining the two extremal profiles of Theorem 3.16. On the other hand, every satisfies
A one-parameter family of realised profiles inside a two-sided bound is far from a characterisation, and the following remains open.
Question 3.19. Let be a level comparable sequence. Describe the structure of the families of functions
that is, the collections of all functions arising, respectively, as the upper and lower -intermediate dimensions of complementary sets associated with .
Assouad type dimensions
The Assouad dimension and the lower Assouad dimension of sets in were studied in [23]. There, the authors prove that, given a non-increasing summable sequence ,
and
Moreover, it was shown that or , and if is any complementary set in , then
and
Furthermore, if the sequence is doubling, then
and if, instead of doubling, one assumes that , then
The -dimensions introduced in § 2 give a one-parameter refinement of the Assouad-dimension results recalled above.
Theorem 3.20 ([24 Prop. 4.2, Thm. 4.3, Cor. 4.7]). Let be a positive, non-increasing, summable sequence and let be an admissible function. Then, for every ,
If is level comparable, then in addition
so that and are extremal in for both dimensions. If moreover for some , every intermediate value is attained:
The same conclusions hold for the quasi-Assouad dimensions, with and replaced by and .
For the lower -dimension the pattern is the familiar one: the countable rearrangement is minimal, with value 0 because it has isolated points, and the Cantor set is maximal, exactly as for the Hausdorff and lower Assouad dimensions. For the upper -dimension, however, the roles are reversed with respect to the Hausdorff dimension case: here realises the smallest value in and the largest.
Remark 3.21. If is doubling and , then and hence , so the upper range in Theorem 3.20 is the full interval . At the other extreme, if then , which is the same for every , and the interval degenerates to a point.
Theorem 3.20 describes the full range of values across ; one may instead ask for the typical value under a natural random model. Attach to each index an independent tag , uniformly distributed on , and order the gaps by increasing tag. This induces a random total order on in which every ordering of a finite set of indices is equally likely and disjoint sets of indices are ordered independently, and hence a random element of . The following dichotomy identifies a sharp threshold, in the depth of the scales examined, separating two completely different almost sure behaviours.
Theorem 3.22 ([25]). Let be a level comparable sequence and set . Then, almost surely:
(i) if as , then and ;
(ii) if as , then and .
Since the Assouad dimensions correspond to , which falls in case (ii), and the quasi-Assouad dimensions arise from functions in case (i), Theorem 3.22 yields the following.
Corollary 3.23. Let be a level comparable sequence. Then, almost surely, satisfies
while
That is, the almost sure Assouad dimensions of a random rearrangement are always extremal, whatever may be, whereas the almost sure quasi-Assouad dimensions always agree with those of . In particular, since a set is uniformly perfect
precisely when its lower Assouad dimension is positive, almost no rearrangement is uniformly perfect. The critical regime is not covered by Theorem 3.22.
Dynamically defined Cantor sets
The sections above study the whole family of complementary sets through the combinatorial and measure-theoretic data of the defining sequence . From now on we restrict to the distinguished Cantor set . A complementary viewpoint, developed in the second half of García’s PhD thesis [21], defines Cantor sets dynamically, as attractors of iterated function systems (IFS), and asks the converse question: which sequence-defined Cantor sets arise this way, with what regularity? This dynamical viewpoint is then applied to a genuinely new question—the arithmetic sum of two members of the “non-linear” family —via the classical notion of thickness.
Iterated function systems and hyperbolic attractors
Definition 4.1 (IFS and attractor). Let be closed and nonempty. A finite family of maps is an iterated function system (IFS) if each is eventually a contraction: there are and with
for all , .
Theorem 4.2 (Hutchinson [28]). Every IFS has a unique nonempty compact attractor satisfying
and in the Hausdorff metric on compacta, for every nonempty compact with for all .
When the are similarities with ratios , the system is self-similar and is a self-similar set; the unique solving
is the similarity dimension, and always , so . Under the open set condition (an open bounded with disjointly), Hutchinson showed , so ; Bandt–Graf and Schief later showed the open set condition is in fact equivalent to —but not to the packing analogue, since Peres–Simon–Solomyak [36] exhibited self-similar sets on the line with yet in their common dimension .
Definition 4.3 (Regular system). An IFS on a closed interval is regular if each and there are , , with, for every and every word : (contractivity) for all ; (bounded distortion) for all , where
Systems with -Hölder continuous derivatives, or derivatives satisfying the Dini condition (with the modulus of continuity), automatically have bounded distortion. For a regular system, the sub-multiplicative quantity
grows like for a function independent of ; is continuous, strictly decreasing, with , (so it has a unique zero), and equals in the self-similar case. This is Bowen’s equation , originally introduced to compute the Hausdorff dimension of quasicircles [12].
Theorem 4.4 ([21]). If is the attractor of a regular system and , then —unconditionally, with no separation hypothesis on the system.
Theorem 4.5 ([21 Theorem 3.23]). If a regular system satisfies the open set condition, then where ; in particular .
Theorems 4.4 and 4.5 together give under the open set condition: the attractor of a regular system is an -set, and the same exponent regularises the covering and the packing process at once. This is the dynamical counterpart of Theorem 3.3, where the gauge played the role now played by —with the difference that there a general dimension function was needed, whereas here regularity of the system forces a power to suffice.
Definition 4.6 (Cookie-cutter set). A regular two-map system on is cookie-cutter (or hyperbolic) if it satisfies the strong separation condition
together with a strengthening of bounded distortion (uniform convergence of local distortion ratios to at small scales); the attractor is a cookie-cutter (or hyperbolic) Cantor set. If the defining derivatives are -Hölder continuous, the set is -hyperbolic.
Theorem 4.7 ([21]). If is the attractor of a cookie-cutter system and , then is a Cantor set (compact, perfect, totally disconnected) with , and .
Strong separation also gives a natural symbolic coding by that is order-preserving for the lexicographic order on (Bedford [8]), which will be used below to encode the scale function.
The family as a dynamically defined Cantor set
Recall from Example 3.2 that for with , that , and that is a -set. The main result of this subsection realises as the attractor of a cookie-cutter system, and identifies the optimal smoothness of such a realisation.
Theorem 4.8 ([22 Theorem 1]). The set is the attractor of a cookie-cutter system whose derivatives are -Hölder continuous, so is -hyperbolic. Moreover, is the largest Hölder exponent attainable: no hyperbolic system respecting the step- interval structure of has attractor with derivatives of Hölder exponent greater than . In this sense is strictly -hyperbolic.
Combined with Theorem 4.7, this recovers from the dynamical side the fact recalled above that is a -set: hyperbolicity forces with .
This raises the converse question for central Cantor sets , i.e. , : which decay conditions on make a dynamically defined set, and with what smoothness? Write as usual and suppose satisfies the (Besicovitch–Taylor-type) decay condition
which is strictly stronger than merely (i.e. , Theorem 3.5) and is genuinely needed: there are non-increasing sequences satisfying the latter but for which no continuously differentiable system has attractor .
Theorem 4.9 ([21]). If is central and satisfies the decay condition above, then is the attractor of a continuously differentiable system (with , translates of each other) whose derivative equals the constant at every point of itself.
The smoothness of this system away from is governed by how fast the derivative’s oscillation on the gaps decays. Writing for the discrepancy at step :
Theorem 4.10 ([21]). With , as in Theorem 4.9: if , the system has bounded distortion; conversely, if the system’s derivatives satisfy the Dini condition, then . Moreover, the system is strictly -hyperbolic if and only if .
Theorem 4.10 is a complete dictionary between the decay rate of the sequence and the Hölder smoothness of the dynamically-realising system, and it recovers Theorem 4.8 for as a special case (with ). A characterisation of central sets admitting Hölder-continuously-differentiable realising systems, by different methods, was independently obtained by Bamón–Moreira–Plaza–Vera [4].
Definition 4.11 (Sullivan’s scale function). Let be a -hyperbolic Cantor set with symbolic coding ; let denote the analogous coding of the “dual” Cantor set obtained by composing along the opposite (past) direction. For , let record the ratios (left interval, gap, right interval)/(total) at step around ; these converge, as , to a limit that is -Hölder continuous. The map is the scale function of .
Theorem 4.12 (Sullivan [41], proof in [9]). Two -hyperbolic Cantor sets are -conjugate if and only if they have the same scale function.
That is, the scale function is a complete -invariant for hyperbolic Cantor sets—it “remembers” the fine geometry of the set at all small scales, and two hyperbolic sets are smoothly equivalent exactly when this invariant coincides.
Theorem 4.13 ([22 Theorem 2]). is -conjugate to the self-similar system
via an order-preserving diffeomorphism with -Hölder derivative.
Theorem 4.13 follows from Theorem 4.12 by an explicit computation showing the two sets share the same (constant) scale function. It transports the self-similar (natural) measure on —the classical Bernoulli convolution associated with parameter —to the invariant measure on , which one shows is comparable to \mathcal{H}^{1/p}\mathbin{\vrule height 1.4ex depth -0.3ex width 0.07ex\vrule height 0.07ex depth -0.02ex width 0.7ex}C_p, since is bi-Lipschitz and Hausdorff measures change by at most bounded factors under bi-Lipschitz maps; we write \upsilon_p \approx\mathcal{H}^{1/p}\mathbin{\vrule height 1.4ex depth -0.3ex width 0.07ex\vrule height 0.07ex depth -0.02ex width 0.7ex}C_p. This equivalence is the bridge used in the next subsection to transfer results about Bernoulli convolutions to the non-linear family .
Sums of Cantor sets and thickness
Motivation: Bernoulli convolutions
The self-similar measure on (with weights ) is the classical Bernoulli convolution: the law of for i.i.d. fair coin flips . Every self-similar measure is of pure type (singular or absolutely continuous); for this dichotomy has been studied intensively since the 1930s.
Theorem 5.1 (Erdős, 1939 [16]). If and is a Pisot number (an algebraic integer all of whose Galois conjugates have modulus ), then is singular; in fact as .
Whether the set of with singular contains anything beyond reciprocals of Pisot numbers is open; on the positive side, Solomyak [40] showed is absolutely continuous for a.e. , and Shmerkin [39] showed .
Thickness and Newhouse's Gap Lemma
A general bound on the dimension of a sum follows from the Lipschitz map : if then (via the product formula for box-regular factors); since , this gives whenever .
For the complementary question—when does a sum contain an interval—the classical tool is Newhouse’s notion of thickness, central to the study of homoclinic bifurcations [34].
Definition 5.2 (Thickness). Let be a Cantor set on the line with a gap . A bridge of is a maximal interval sharing an endpoint with that meets no gap at least as long as . The thickness of is
Thickness is invariant under translation and scaling: .
Lemma 5.3 (Newhouse’s Gap Lemma [32]). If are Cantor sets on the line with , then either is contained in a gap of , or is contained in a gap of , or .
Proposition 5.4 ([34]). If , then is a finite union of closed intervals (so contains an open interval); if in addition no translate of either set lies in a bounded gap of the other, is a single interval.
For example, , so once . For , a direct computation with the step-interval lengths gives the two-sided bound
which, via Proposition 5.4, only yields that contains an interval under the condition —much more restrictive than the condition that one would expect by analogy with the self-similar sets and .
The gap can be closed using local thickness (the thickness of the sub-Cantor-sets shrinking to ), for which the analogous gap-lemma argument only requires the local thickness product to exceed 1 pointwise:
Theorem 5.5 ([22]). The local thickness of is constant, equal to . Consequently, if , then contains an open interval—matching, up to the boundary case, the bound one would guess from the conjugate self-similar sets .
Global (almost-everywhere) results
Beyond the thickness threshold, one can ask for the exact Hausdorff dimension or positivity of Lebesgue measure of across the full range of parameters. Adapting the transversality method of Peres–Solomyak [37] for homogeneous self-similar families—using the conjugacy of Theorem 4.13 to control the derivative, in , of the projection —gives:
Theorem 5.6 ([22]). For every compact : (a) for a.e. with , ; (b) for a.e. with , .
Corollary 5.7 ([22]). For fixed : for a.e. , .
Corollary 5.7 is the exact non-linear analogue, for the family , of the Peres–Schmerkin formula (valid whenever is irrational [35]), obtained here for a full-measure set of the parameter rather than under an arithmetic condition—reflecting the extra transversality available from the non-linearity of the conjugacy .
The absolute continuity half of the Peres–Solomyak method also transfers, via a Frostman-measure argument, to the invariant measures :
Theorem 5.8 ([22]). Fix . For a.e. with , the convolution is absolutely continuous with density in ; equivalently (since \upsilon_p\approx\mathcal{H}^{1/p}\mathbin{\vrule height 1.4ex depth -0.3ex width 0.07ex\vrule height 0.07ex depth -0.02ex width 0.7ex}C_p), the convolution \mathcal{H}^{1/q}\mathbin{\vrule height 1.4ex depth -0.3ex width 0.07ex\vrule height 0.07ex depth -0.02ex width 0.7ex}C_q*\mathcal{H}^{1/p}\mathbin{\vrule height 1.4ex depth -0.3ex width 0.07ex\vrule height 0.07ex depth -0.02ex width 0.7ex}C_p is absolutely continuous with density.
Remark 5.9. The condition “for a.e. , fixed” in Theorem 5.8 and Corollary 5.7 cannot currently be upgraded to “for every ” or symmetrised in both parameters simultaneously; this is a limitation of the transversality method inherited from [37], already pointed out in [22]. Whether the Fourier transform decays to 0 as —the natural non-linear analogue of the Erdős/Salem theory of § 5 above—is entirely open: the non-linearity of the conjugacy destroys the product-of-cosines formula that makes tractable in the self-similar case.
The results of this section connect to a broader circle of ideas on sums of dynamically defined Cantor sets: Palis conjectured that the sum of two -hyperbolic Cantor sets either has zero Lebesgue measure or contains an interval; this is false in general—Sannami [38] constructed a Cantor set such that has positive Lebesgue measure but empty interior, but true generically, in the sense of Moreira–Yoccoz [31], who showed that pairs of hyperbolic sets with generically admit a stable intersection (a robust transversal intersection of and a translate of ), forcing to contain an interval. Whether has nonempty interior throughout the range for small remains open.
Open Problem 5.10 ([21]). Extend the transversality analysis above to the bi-parametric family (sequences ), using the lexicographic dimension induced by in place of ; conjecturally, for fixed and a.e. (or fixed and a.e. ), in the sense of the order on . This would require bi-parametric analogues of Frostman’s lemma and of -energy adapted to .
Concluding remarks
A single pattern runs through the results collected here. For every notion of size considered, the two canonical members of are extremal, exactly or up to constants, and in most cases where a complete description of the attained values exists it is a closed interval with endpoints at those two sets; the packing measures, with their all-or-nothing dichotomy, are the exception. What changes from one notion to the next is which of them sits at which end.
For the Hausdorff dimension, and more generally for the Hausdorff -measures, the maximum is at and the minimum at the countable set ; the same holds for the intermediate dimensions at every , and for the lower Assouad and lower -dimensions. For the upper Assouad and upper -dimensions the order is reversed, and so it is for the packing -premeasure: is simultaneously the maximiser of and the minimiser of within the family. The reversal is not an accident of proof technique. Covering-based and global quantities reward the even distribution of gaps that the Cantor construction produces, while packing-based and local ones reward the concentration that the decreasing rearrangement produces, and and are the extreme cases of each.
Against this variability stands the rigidity of the box dimensions, which take the same value on every member of . The intermediate dimensions measure exactly how far a given notion sits from that rigid end: they run from the full-range behaviour of at to the constancy of at , and Theorem 3.18 shows that for each every value between the two extremes is attained, the interval collapsing to a point only at .
Several questions remain open. The most substantial, stated as Question 3.19, asks not which values but which functions of arise within a fixed family: the ambient answer for arbitrary compact sets is known from [7], and the profiles of § 3 give a one-parameter family of realised examples, but between these lies a genuine gap. For the -dimensions, the almost sure behaviour in the critical regime is not covered by the dichotomy of Theorem 3.22. In the Hausdorff–packing duality, the sharp constants and the extremal sets are known on the Hausdorff side only for middle- Cantor sets, and on the packing side not even for the middle-third Cantor set. Finally, on the dynamical side, the almost-everywhere results for cannot at present be made uniform in both parameters, and the decay of —the non-linear counterpart of the Erdős–Salem theory for Bernoulli convolutions—is entirely open.
Acknowledgments
These notes grew out of three lectures given by the authors at the Instituto de Matemática Aplicada San Luis (Consejo Nacional de Investigaciones Científicas y Técnicas - Universidad Nacional de San Luis), San Luis, Argentina, in April 2026. We are very grateful to Sergio Favier for the invitation, and its warm hospitality. We also thank the participants for their questions and comments, which helped shape this text. (N. Angelini) UNSL–IMASL, CONICET, San Luis, Argentina Email address: [email protected]
(C. Cabrelli) Departamento de Matemática, FCEyN, Universidad de Buenos Aires, and IMAS–CONICET, Buenos Aires, Argentina Email address: [email protected]
(U. Molter) Departamento de Matemática, FCEyN, Universidad de Buenos Aires, and IMAS–CONICET, Buenos Aires, Argentina Email address: [email protected]
References
- [1]N. Angelini and U. Molter, Critical values for intermediate and box dimensions of projections and other images of compact sets, J. Fractal Geom. 12 (2025), no. 3–4, 369–394.DOI
- [2]N. Angelini and U. Molter, Intermediate dimensions and their applications, Proc. Roy. Soc. Edinburgh Sect. A, published online 2026, 1–19, doi:10.1017/prm.2026.10162.
- [3]N. E. Angelini, U. M. Molter, J. M. Tejada. Intermediate dimensions of measures: interpolating between Hausdorff and Minkowski dimensions. J. Math. Anal. Appl. 555 (2026), no. 1, Paper No. 130039.
- [4]R. Bamón, C. G. Moreira, S. Plaza, J. Vera. Differentiable structures of central Cantor sets. Ergodic Theory Dynam. Systems 17 (1997), no. 5, 1027–1042.
- [5]A. Banaji. Generalised intermediate dimensions. Monatsh. Math. 202 (2023), no. 3, 465–506.
- [6]A. Banaji and I. Kolossváry, Intermediate dimensions of Bedford–McMullen carpets with applications to Lipschitz equivalence, Adv. Math. 449 (2024), Paper No. 109735, 69 pp.
- [7]A. Banaji and A. Rutar, Attainable forms of intermediate dimensions, Ann. Fenn. Math. 47 (2022), no. 2, 939–960.
- [8]T. Bedford. Applications of dynamical systems theory to fractals—a study of cookie-cutter Cantor sets. In Fractal Geometry and Analysis (Montreal, 1989), NATO ASI Series C, vol. 346, Kluwer, 1991, 1–44.DOI
- [9]T. Bedford, A. M. Fisher. Ratio geometry, rigidity and the scenery process for hyperbolic Cantor sets. Ergodic Theory Dynam. Systems 17 (1997), no. 3, 531–564.arxiv.org/abs/math/9405217
- [10]A. S. Besicovitch, S. J. Taylor. On the complementary intervals of a linear closed set of zero Lebesgue measure. J. London Math. Soc. 29 (1954), 449–459.DOI
- [11]E. Best. A closed dimensionless linear set. Proc. Edinburgh Math. Soc. (2) 6 (1939), 105–108.DOI
- [12]R. Bowen. Hausdorff dimension of quasicircles. Inst. Hautes Études Sci. Publ. Math. 50 (1979), 11–25.
- [13]C. Cabrelli, U. B. Darji and U. M. Molter, Visible and invisible Cantor sets, in: Excursions in Harmonic Analysis, Vol. 2, 2013.arxiv.org/abs/1109.1174
- [14]C. Cabrelli, F. Mendivil, U. Molter, R. Shonkwiler. On the Hausdorff h-measure of Cantor sets. Pacific J. Math. 217 (2004), no. 1, 45–59.
- [15]R. O. Davies, Sets which are null or non-sigma-finite for every translation invariant measure, Mathematika 18 (1971), no. 2, 161–162.DOI
- [16]P. Erdős. On a family of symmetric Bernoulli convolutions. Amer. J. Math. 61 (1939), 974–976.DOI
- [17]K. J. Falconer. Techniques in Fractal Geometry. John Wiley & Sons, Chichester, 1997.
- [18]K. Falconer. Fractal Geometry: Mathematical Foundations and Applications, 3rd ed. Wiley, 2014.
- [19]K. Falconer, J. M. Fraser, T. Kempton. Intermediate dimensions. Math. Z. 296 (2020), 813–830.
- [20]J. M. Fraser, Assouad Dimension and Fractal Geometry, Cambridge Tracts in Mathematics, vol. 222, Cambridge University Press, Cambridge, 2020.
- [21]I. A. Garcia. Análisis fractal de conjuntos de Cantor no lineales. Tesis Doctoral, Universidad Nacional del Litoral, 2008.
- [22]I. Garcia, A family of smooth Cantor sets, Ann. Acad. Sci. Fenn. Math. 36 (2011), 21–45.
- [23]I. García, K. Hare, F. Mendivil. Assouad dimensions of complementary sets. Proc. Roy. Soc. Edinburgh Sect. A 150 (2020), 2585–2598.
- [24]I. García, K. E. Hare, and F. Mendivil, Intermediate Assouad-like dimensions, J. Fractal Geom. 8 (2021), no. 3, 201–245.
- [25]I. García, K. E. Hare, and F. Mendivil, Almost sure Assouad-like dimensions of complementary sets, Math. Z. 298 (2021), no. 3–4, 1201–1220.arxiv.org/abs/1903.07800
- [26]I. Garcia, U. Molter, R. Scotto. Dimension functions of Cantor sets. Proc. Amer. Math. Soc. 135 (2007), no. 10, 3151–3161.
- [27]K. E. Hare, F. Mendivil and L. Zuberman, The sizes of rearrangements of Cantor sets, Canad. Math. Bull. 56 (2013), no. 2, 354–365.
- [28]J. E. Hutchinson. Fractals and self-similarity. Indiana Univ. Math. J. 30 (1981), no. 5, 713–747.
- [29]F. Liu and L.-F. Xi, Quasi-Assouad dimension of fractals, J. Fractal Geom. 3 (2016), no. 2, 187–215.
- [30]C. G. Moreira, H. Erazo, and N. Angelini, Generalized Hausdorff dimension of irrationals with Lagrange value exactly 3, preprint, 2025, arXiv:2511.10328.arxiv.org/abs/2511.10328
- [31]C. G. T. de A. Moreira, J.-C. Yoccoz. Stable intersections of regular Cantor sets with large Hausdorff dimensions. Ann. of Math. (2) 154 (2001), no. 1, 45–96.
- [32]S. E. Newhouse, The abundance of wild hyperbolic sets and non-smooth stable sets for diffeomorphisms, Publ. Math. Inst. Hautes Études Sci. 50 (1979), 101–151.DOI
- [33]L. Olsen and D. L. Renfro, On the exact Hausdorff dimension of the set of Liouville numbers. II, Manuscripta Math. 119 (2006), no. 2, 217–224.DOI
- [34]J. Palis, F. Takens. Hyperbolicity and Sensitive Chaotic Dynamics at Homoclinic Bifurcations. Cambridge Studies in Advanced Mathematics, vol. 35, Cambridge University Press, 1993.
- [35]Y. Peres and P. Shmerkin, Resonance between Cantor sets, Ergodic Theory Dynam. Systems 29 (2009), no. 1, 201–221.
- [36]Y. Peres, K. Simon and B. Solomyak, Self-similar sets of zero Hausdorff measure and positive packing measure, Israel J. Math. 117 (2000), 353–379.DOI
- [37]Y. Peres, B. Solomyak. Self-similar measures and intersections of Cantor sets. Trans. Amer. Math. Soc. 350 (1998), no. 10, 4065–4087.DOI
- [38]A. Sannami, An example of a regular Cantor set whose difference set is a Cantor set with positive measure, Hokkaido Math. J. 21 (1992), no. 1, 7–24.
- [39]P. Shmerkin, On the exceptional set for absolute continuity of Bernoulli convolutions, Geom. Funct. Anal. 24 (2014), no. 3, 946–958.arxiv.org/abs/1303.3992
- [40]B. Solomyak. On the random series ∑ ±λ^n (an Erdős problem). Ann. of Math. (2) 142 (1995), no. 3, 611–625.DOI
- [41]D. Sullivan. Differentiable structures on fractal-like sets, determined by intrinsic scaling functions on dual Cantor sets. In The Mathematical Heritage of Hermann Weyl (Durham, NC, 1987), Proc. Sympos. Pure Math., vol. 48, Amer. Math. Soc., 1988, 15–23.DOI
- [42]Claude Tricot. Curves and fractal dimension. Springer Science & Business Media, 1995.DOI