betaFeedback

WorksPhysics and Astronomy

Perturbation of charge density waves in 1T-TiSe2_2

Abstract

In this study, using low-temperature scanning tunneling microscopy (STM), we focus on understanding the native defects in pristine 1T-TiSe2_2 at the atomic scale. We probe how they perturb the charge density waves (CDWs) and lead to local domain formation. These defects influence the correlation length of CDWs. We establish a connection between suppression of CDWs, Ti intercalation, and show how this supports the exciton condensation model of CDW formation in 1T-TiSe2_2.

Introduction

Transition metal dichalcogenides (TMDCs) are versatile materials that exhibit phenomena like strongly correlated phases to multifaceted tunable properties for applications in flexible electronics, optoelectronics, spintronics, and energy harvesting [1, 2, 3, 4]. Many exotic physical phenomena, like spin-valley interaction, exciton-polariton states, charge density wave (CDW) states, are observed in the TMDCs. TMDCs have a characteristic layered structure, tunable bandgap, and strong spin-orbit coupling favoring such applications. The chemical composition of TMDCs is of the form MX2MX_2 where MM denotes transition metal (like TiTi, MoMo, WW) and XX represents chalcogen (like SS, SeSe, and TeTe). Despite having a similar structure, these materials can be categorized as insulating, semiconducting, semi-metallic, metallic, or superconducting, depending on their chemical composition. The non-bonding dd band and the extent of its electron filling endow these compounds with diverse properties. Bulk crystals of TMDCs consist of two-dimensional (2D) layers bonded by weak van der Waals interactions, rendering them easy to exfoliate. Depending on the arrangements of atoms, structural polytypes of 2D TMDCs can be categorized as 1T (tetragonal symmetry with octahedral coordination), 2H (hexagonal symmetry with trigonal prismatic coordination), and 3R (rhombohedral symmetry with trigonal prismatic coordination). The layer degree of freedom provides an additional parameter to tune the properties of TMDCs [5].

One of the group IV TMDCs hosting interesting properties is 1T-TiSe2_2. It is a semimetal with a small indirect bandgap [6]. At temperature TCDW∼200T_{\mathrm{CDW}} \sim200K 1T-TiSe2_2 undergoes a second-order phase transition to the charge density wave (CDW) phase [7]. Charge density wave is a many-body, correlated electrons phenomenon, where a periodic distortion modulates electron density. CDWs, depending on the ratio of their wavelength and lattice parameters, are classified as commensurate (CCDW), nearly commensurate (NCCDW), or incommensurate (ICDW) [8, 9]. Pristine 1T-TiSe2_2 shows CCDW order below 200KK [7]. Charge carrier doping via electrochemical ionic gating in 1T-TiSe2_2 leads to suppression of CCDW, emergence of ICDW and superconducting phase at lower temperature [10]. The CDW transition temperature drops significantly for 1T-TiSe2_2 doped with copper. Superconductivity emerges in Cux_xTiSe2_2 for x∼0.04x \sim0.04, maxima of superconducting transition temperature reaches at x∼0.08x \sim0.08 [11]. ICDW phase coexists with superconducting phase under applied pressure [12] and copper doping [13]. The mechanism of formation of CDWs in 1T-TiSe2_2 is still a matter of debate. The two favored mechanisms are excitonic insulator phase [14] and band type Jahn-Teller effect [15]. Excitons are bound states of electrons and holes. Excitons are bosons and can form a Bose-Einstein condensate [16, 17, 18, 19]. The excitonic insulator phase can arise in a small gap semiconductor or semimetal, where excitons form spontaneously because of low carrier density to screen the attractive Coulomb interaction between electrons and holes. In the Jahn-Teller effect, the lattice spontaneously distorts to lift the degeneracy and reach the lower symmetry state because of the interaction between phonons and degenerate electron states. Jahn-Teller like mechanism is independent of free carrier concentration.

1T-TiSe2_2 is a nonstoichiometric compound. The concentration of TiTi in a crystal depends on the temperature at which the crystal is grown. Commonly used method for TMDC crystal growth is chemical vapour transport (CVT). Higher growth temperature generates higher chalcogen pressure resulting in a crystal with intercalation of metal [20]. An indirect inference of presence of excess TiTi can be carried out through temperature-dependent resistivity measurements. 1T-TiSe2_2 shows anomalous resistivity peak near CDW phase transition. As the growth temperature increases, the crystal becomes more metallic due to excess TiTi and hence suppresses the anomalous resistivity peak [7, 21]. 1T-TiSe2_2 shows a small indirect band gap above the transition temperature TCDW∼200T_{\mathrm{CDW}} \sim200K [22, 23]. Angle resolved photo emission spectroscopy (ARPES) experiments show a small band gap below CDW transition [24]. Recent experimental evidence suggests excitonic insulator mechanism [25, 26, 27, 28, 29, 30]. Theoretical investigations suggest that excitonic condensation can be either superfluid [31] or an insulator [32]. Chiral nature of CDWs in pristine and Cu-doped 1T-TiSe2_2 has been reported using polarized optical reflectometry and STM [33, 34, 35]. Suppression of CDW results in superconducting phase transition with application of pressure[36] via electrostatic gating [10] or with Cu intercalation [11] or Pd intercalation [37]. 1T1T-TiSe2\mathrm{TiSe}_{2} becomes insulating after Pt doping[38]. This implies that doping affects the nature of CDWs and electronic properties of 1T1T-TiSe2\mathrm{TiSe}_{2}.

A correlated phenomenon, like CDWs, is sensitive to the presence of defects. Here, using low-temperature STM, we focus on the behavior of CDWs at the atomic scale in the presence of intrinsic defects. We investigated the relationship between growth conditions and intrinsic defects in crystals grown by different synthesis routes. We referred to them as sample A (crystal was grown by chemical vapor transport (CVT) using iodine (I2\mathrm{I}_{2})) and sample B (crystal was grown using Se as self-flux) in the subsequent discussion.

Methods

The experiments were performed by using an Omicron ultra-high vacuum (UHV) low temperature (LT) scanning tunneling microscope (STM) at 77K77\mathrm{K} with a base pressure of 5⋅10−115\cdot10^{-11} mbar. Two 1T1T-TiSe2\mathrm{TiSe}_{2} crystals were studied. Sample A was grown using CVT with I2\mathrm{I}_{2} as the transport agent. Sample B synthesized using the flux zone method by 2D semiconductors, USA [39]. For STM studies of both the samples, 1T1T-TiSe2\mathrm{TiSe}_{2} single crystal surface was prepared by cleaving it in the UHV sample preparation chamber. The surface quality was checked with STM at 77K77\mathrm{K}. A clean surface at the atomic level was inferred from several STM images of different scan sizes. Electrochemically etched tungsten (WW) tips used for imaging. Several trials of imaging were performed with different tips. Topography measurements were taken in constant current mode. In our set up bias voltage is applied to the sample. The images were processed using the image analysis software SPIP 6.0.9 (Image Metrology). MAT-LAB (by The MathWorks Inc.) was used for numerical calculations.

Results and discussion

1T1T-TiSe2\mathrm{TiSe}_{2} crystal is a stack of monolayers bonded by van der Waals interaction. Each monolayer consists of titanium (TiTi) atoms sandwiched between two sheets of selenium (SeSe) atoms (Figure 1(a)). Each TiTi atom is surrounded by six SeSe atoms in octahedral coordination, as shown in Figure 1(a). The space group of 1T1T-TiSe2\mathrm{TiSe}_{2} is P3ˉm1P\bar{3}m1 (no.164). The crystal cleaves along (001) planes were exposing SeSe atoms in a hexagonal symmetric pattern. In constant current topography images, STM tip probes the topmost SeSe atoms [40, 41]. The tunneling current is mainly due to the contribution from the 4p4p orbital of SeSe atoms. The preferred site for TiTi atom intercalation is schematically shown in Figure 1(b), whereas OO substitution site shown in Figure 1(c). Iodine is used as a transport agent in CVT method of crystal growth. Substitution of SeSe atom by II is another defect commonly found in CVT grown samples. II substitution occupies same sites as OO substitution. Defects in the STM topography image of sample A in Figure 1(d) and sample B Figure 1(e) show up as localized bright regions. Note that the defects are less in sample B than in sample A.

Image not extracted

Figure 1. (a) Schematics of 1T1T-TiSe2\mathrm{TiSe}_{2} unit cell viewed from an angle, TiTi atoms in octahedral coordination, SeSe atoms form a triangular lattice. (b) Schematics of TiTi intercalation site (c) Schematic of OO substitution site (d) Empty-state constant current STM image of 30nm×30nm30\mathrm{nm}\times30\mathrm{nm} area of sample A, Enlarged view of TiTi intercalation sites are in yellow rounded rectangle inset and that of OO substitution sites are in blue rounded rectangle inset. Vbias=300mVV_{\mathrm{bias}}=300\mathrm{mV} and Iset=300pAI_{\mathrm{set}}=300\mathrm{pA}. (e) Empty-states constant current STM image of 20nm×20nm20\mathrm{nm}\times20\mathrm{nm} area of sample B, Vbias=300mVV_{\mathrm{bias}}=300\mathrm{mV} and Iset=500pAI_{\mathrm{set}}=500\mathrm{pA}.

In Figure 1(d) the inset in yellow rounded rectangle shows the enlarged atomic-scale image of the defect, which can be identified as TiTi intercalation site. Intercalated atoms occupy octahedral sites or tetrahedral sites in the van der Waals gap. For TiTi, favorable sites are octahedral sites because of their more significant coordination number, and spacing between two nearby octahedral sites is more considerable than tetrahedral sites [42]. The characteristic appearance of intercalated TiTi sites can be attributed to change in the local density of states [43]. These defects appear bright in filled-states STM images (at negative bias voltages).

There were defects with a strongly localized density of states at the topmost SeSe atoms surrounded by depleted region in empty-states STM images (at positive bias voltages). Those defects can be identified with oxygen (OO) substitution of the SeSe atom in the lower layer. II substitution sites are hard to recognize as they appear very faint compare to OO sites [41]. Substitution of SeSe by OO or II on topmost layer is not favored energetically [41]. Oxygen, present as an impurity in iodine and selenium precursor during growth, acts as a native dopant. Sample A has been observed to possess more TiTi intercalation sites than sample B (Figure 1(d) and 1(e)). Using STM images taken in different regions of both samples, the average number of intercalation sites were counted. Employing this method, we found that the average count of TiTi intercalation sites per unit cell for sample A is 0.6% as compared to 0.2% sites per unit cell for sample B. This observation supports the dependence of TiTi intercalation sites’ concentration on sample growth conditions [7].

Intercalation and substitution change the material’s carrier concentration, leading to a change in the material’s electronic properties. Correlated states like CDWs are sensitive to external factors like mechanical stress, external pressure, and carrier concentration. Point defects can affect CDWs by changing carrier density locally and introducing localized distortions in lattice [20]. STM topography images were obtained at different bias voltages, spatially resolving the CDWs. Figure 2(a) and 2(e) shows STM images of sample A and B with different TiTi intercalation and OO substitution densities. Real space topography shows the clear 2 × 2 superlattice of CDW. Figure 2(c) is an enlarged image with atomic resolution showing CDWs forming superstructure (marked by yellow circles). Fourier transform (FT) of topography images (Figure 2(b) and 2(f)) yields contributions of lattice and CDW superlattice as six-fold symmetry peaks. Peaks in FT images affirm that the wavelength of CDW is twice the lattice spacing (first-order Bragg peak). To reduce background noise and understand the spatial variation of CDW amplitude, we performed an inverse transform of CDW FT peaks. Inverse Fourier transform (IFT) image clearly shows diminishing CDW amplitudes in the presence of TiTi defects in Figure 2(d) and 2(g). In the presence of a large number of defects, CDW modulated regions can be easily visually identified from IFT images (Figure 2(d)). In 1T1T-TiSe2TiSe_{2} with more TiTi intercalation density, domains of CDWs are formed by the presence of defects. 2 X 2 superstructure of CDW changes to 1 X 1 modulation near intercalation sites, which forms the boundaries of CDW modulated region (Figure 2(a) and 2(c)). Also, the IFT image is used as a guide to locate these boundaries. Different CDW modulated regions are marked in red in Figure 2(a). CDW modulated regions separated by boundaries was not observed in Figure 2(e) containing fewer intercalation sites. IFT in Figure 2(g) shows the reduced amplitude of CDWs in the presence of intercalation sites but no formation of separate regions. 1T1T-TiSe2TiSe_{2} thin flakes are reported to oxidise quickly in the atmospheric conditions and disrupt the CDW phase [44]. The oxidation of 1T1T-TiSe2TiSe_{2} was minimised by cleaving the crystals in our UHV sample preparation chamber (refer to section II. METHODS). OO and II substitution sites increases the density of states in the unoccupied states away from the Fermi energy [41]. The CDW gap near Fermi level remains unaffected by OO or II substitution.

Image not extracted

Figure 2. (a) Filled-states constant current STM image of 30 nm X 30 nm area of sample A grown by CVT method, Vbias=−400V_{bias} = -400 mV Iset=300I_{set} = 300 pA. Areas marked by red are CDW modulated regions, separated by non-modulated regions induced by TiTi intercalation sites. (b) Fourier transform of topography image in (a). (c) An enlarged image showing 2 X 2 superstructure with CDW peaks marked by yellow circles (d) Selective inverse Fourier transform of CDW peaks in (b), (e) Empty-states constant current STM image of 30 nm X 30 nm area of sample B grown by flux zone method, Vbias=−300V_{bias} = -300 mV Iset=400I_{set} = 400 pA, (f) Fourier transform of topography image in (e). (g) Selective inverse Fourier transform of CDW peaks in (f)

Metal intercalation of 1T1T-TiSe2TiSe_{2} at certain doping concentration shows phase shift of CDW modulation across the domain walls [26, 45]. CuCu intercalation in 1T1T-TiSe2TiSe_{2} results in incommensurate CDW phase with localized commensurate CDWs separated by domain walls at critical doping concentration [46]. TiTi, like CuCu, is electropositive and suppresses the CDW phase. CuCu intercalation into van der Waals gap of 1T1T-TiSe2TiSe_{2} was stabilized by transfer of charge from CuCu to SeSe atoms in the adjacent layers [47]. Similarly, the TiTi intercalant gets stabilized by charge transfer. A significant overlap between the atomic orbitals of intercalated TiTi and SeSe atoms in the layer results in the intercalant sites’ peculiar appearance in the STM images. To better understand phase shift of CDWs across domain boundaries, IFT of both lattice Bragg peaks and CDW peaks of Figure 2(a) were obtained, as shown in Figure 3(a). A line section of electron density indicates the suppression of CDW modulation at the boundary (Figure 3(b)).

Image not extracted

Figure 3. (a) Inverse Fourier transform image of Bragg peaks and CDW peaks of STM image shown in Figure 2(a) of sample A. Line sections 1 and 2 passing through domain boundary (marked by red region) plotted in (b) Red part of line section indicates no CDW modulation. No phase shift observed across the domain wall.

Interestingly we observed no phase shift in the CDW modulation across the boundaries. We can infer that the increased concentration of TiTi intercalation leads to the disruption of CDW and reduces long-range order to small regions [48].

The electropositive nature of TiTi intercalation defect and formation of CDW modulated regions and non-modulated boundaries in excess TiTi intercalation may provide some insight into the mechanism of formation of CDWs. Considering the results as mentioned above, we offer a hypothesis for suppression of CDWs by TiTi intercalation. Semimetals or small gap semiconductors at lower temperatures can undergo CDW phase transition by excitonic condensation mechanism. Exciton is a bound state of electrons and holes, mediated by Coulomb interaction, a composite boson. For 1T1T-TiSe2TiSe_2 a small carrier density and a weakly screened Coulomb interaction can result in exciton formation. Excitons are formed from electrons in the pocket at the LL point in the Brillouin zone (BZ) and holes from the pocket at Γ\Gamma point in the energy band structure of 1T1T-TiSe2TiSe_2. Being a composite boson, it undergoes condensation at TCDW∼200T_{CDW} \sim200K as the number of excitons increases. Excitonic condensation leads to a periodic modulation of charge density, a CDW state. The extent to which CDWs are modulated in 1T1T-TiSe2TiSe_2 is intercalation dependent. If we assume excitonic condensation as the mechanism of CDW state in 1T1T-TiSe2TiSe_2 then the suppression of CDWs and formation of domain boundaries can be explained by the electropositive nature of TiTi intercalation.

The first-principles energy band calculations show that the electron pocket at LL point in BZ is derived mainly from TiTi 3d3d states. Hole pockets at Γ\Gamma are derived from SeSe 2p2p states hybridized with TiTi 3d3d states [49]. At Fermi energy, more than half the density of states (DOS) results from TiTi states, and the rest comes from SeSe [47]. As TiTi intercalation’s character is electropositive, the addition of TiTi results in the acquisition of electrons. Because of TiTi’s larger DOS, electrons added to the system go to TiTi derived states around the Fermi level. TiTi intercalation now causes the enhancement of electronic states at Fermi energy, resulting in the strong screening of Coulomb interaction between electrons and holes. This screening results in the reduction of excitonic pair and suppression of charge density waves.

To further characterize the CDW order, we have calculated the translational correlation. Calculating the correlation length of CDWs using topographic images can shed light on the interplay between CDWs and intercalant density. Non modulated boundaries of CDW modulated regions can be easily identified visually from STM topography images of areas with large defect concentration as in Figure 3(a). Correlation length can be used to gauge the disruption of CDW order because of intercalation. Correlation length measurement can pick up the change in CDW order where it is not easily discernible from STM images visually. The presence of intercalants disrupts the CDW order hence results in a reduced translational correlation length.

CDW peaks in the Fourier transform of topography images were selected and IFT was performed. IFT image displays CDW amplitudes as function of position (as in Figure 2(d) and Figure 2(g)). Autocorrelation of this image provides information about the translational correlation length. The correlation length was obtained by calculating the change in amplitude of CDW from line sections in the auto correlation of IFT images, using following equation [50],

A(x)=A0e−x/ξcos⁡(kcdwx)+B0(1)A(x) = A_0 e^{-x/\xi} \cos(k_{\mathrm{cdw}}x) + B_0 \tag*{(1)}

Where A(x)A(x) is CDW amplitude, ξ\xi is correlation length, kcdwk_{\mathrm{cdw}} wave vector of CDW in xx direction, B0B_0 is average random noise in autocorrelation obtained from IFT and A0=1−B0A_0 = 1 - B_0. The finite correlation length is a consequence of the in-homogeneity and finite scanning area [50]. Autocorrelation of STM topography image of area with more defects in Figure 2(a) is shown in Figure 4(a) and area with less number of defects in Figure 2(e) is shown in Figure 4(b). Line section along the axis in autocorrelation image that is the amplitude of CDW as a function of xx was plotted. Correlation length was calculated by a fitting curve to the decay rate of amplitude in the line section. In Figure 4(b) and (d) blue curve is line section along CDW direction indicates its amplitude and red curve fitted using (1) shows rate of change of CDW amplitude. The correlation length obtained from fitting indicates that the correlation length is smaller for images with more intercalant sites than images with fewer intercalant sites. This implies the long-range coherence of CDWs has broken into small domains because of intercalation. A sharp decline of CDW amplitudes means a smaller correlation length, which is a sign of the reduced long-range order.

Image not extracted

Figure 4. (a) Autocorrelation of 30 nm x 30 nm area of sample A, (b) Autocorrelation of 30 nm x 30 nm area of sample B, (c) and (d) Line section of autocorrelation of sample A shown in (a) and autocorrelation of sample B shown in (b) along the CDW direction respectively, red curve indicates the rate of decay of CDW amplitude.

The correlation length of CDW is a function of the concentration of Ti intercalation. A better picture of the exact dependence of correlation length on Ti intercalation density can be obtained by plotting the correlation length, as shown in Figure 5. Atomically resolved images were taken, and the number of Ti intercalation sites were counted. The correlation length of CDWs was calculated from the autocorrelation of IFT images, as mentioned above. Ti intercalation concentration in Sample B is lesser than Sample A and shows a large correlation length. The overall trend indicates that the correlation length of CDWs decreases as the Ti intercalation increases. The dependence of correlation length on electron doping nature of Ti intercalant strongly supports our hypothesis discussed in the earlier part of the excitonic origin of CDWs. However, there are certain features in the graph that require close examination. The correlation length tends to increase gradually at defect concentration of 0.3%, reaching maxima at 0.5% then decrease again. This feature could be connected to the in-equivalent Ti defect sites for each defect that are a consequence of CDW modulation [48]. We believe our experimental result will motivate further detailed Density Functional theory (DFT) based calculations to explain this pattern in our correlation length.

Image not extracted

Figure 5. Correlation length obtained by fitting the CDW amplitudes for topography images of different Ti intercalation concentration. Sample A contains more intercalation sites than sample B. (The average density of intercalation sites for sample A is 0.6% and for sample B is 0.2%). Correlation length of CDWs in sample B seems to be higher than that of CDWs in sample A

Conclusions

We have explored defects at the atomic scale in two crystals of 1T1T-TiSe2\mathrm{TiSe}_2 grown using different methods. Ti atoms get intercalated in the van der Waals gap. We find that the density of Ti intercalation affects the long-range order of CDWs. An increased concentration of Ti intercalation forces CDWs to form domains. There is no phase shift across the domain walls. The correlation length of CDWs is inversely proportional to the density of intercalated Ti atoms. Intercalation of Ti in 1T1T-TiSe2\mathrm{TiSe}_2 suppresses CDWs and forms domain boundaries that can be explained by electron doping nature of Ti. Intercalated Ti atoms reduce the number of holes in the system. In the excitonic condensation model of CDW formation, the reduction of hole concentration depletes excitonic bound states. CDW suppression is a direct consequence of excitonic bound state depletion. Thus we demonstrate that our study of the dependence of correlation length on Ti intercalation supports the excitonic condensation model of formation of CDWs in 1T1T-TiSe2\mathrm{TiSe}_2.

Acknowledgments

LH acknowledges the financial support from the Department of Science and Technology (DST), India [Grant No. SR/WOS-A/PM-33/2018 (G)] and IISER Pune. This work was financially supported by the Indian Institute of Science Education and Research (IISER), Pune. IM is grateful to CSIR, Government of India, for SRF and IISER Pune, for financial support in the form of a research fellowship, and UR is thankful to UGC, Government of India, for SRF.

References

  1. [1]A. A. Tedstone, D. J. Lewis, and P. O’Brien, Synthesis, Properties, and Applications of Transition Metal-Doped Layered Transition Metal Dichalcogenides, Chemistry of Materials 28, 1965 (2016).
  2. [2]T. Mueller and E. Malic, Exciton physics and device application of two-dimensional transition metal dichalcogenide semiconductors, NPJ 2D Materials and Applications 2, 1 (2018).
  3. [3]I. Pallecchi, N. Manca, B. Patil, L. Pellegrino, and D. Marre, Review on thermoelectric properties of transition metal dichalcogenides, Nano Futures (2020).
  4. [4]H. Huang, X. Fan, D. J. Singh, and W. T. Zheng, Recent progress of TMD nanomaterials: phase transitions and applications, Nanoscale 12, 1247 (2020).DOI
  5. [5]J. T. Alexander V. Kolobov, Two Dimensional Transition metal dichalcogenides, 1st ed., Series in Material Sciences, Vol. 239 (Springer, 2016).
  6. [6]H. Isomaki and J. Von Boehm, The gaps of the ideal TiS2 and TiSe2, Journal of Physics C: Solid State Physics 14, L75 (1981).DOI
  7. [7]F. J. Di Salvo, D. Moncton, and J. Waszczak, Electronic properties and superlattice formation in the semimetal TiSe2, Physical Review B 14, 4321 (1976).
  8. [8]G. Grüner, The dynamics of charge-density waves, Reviews of modern physics 60, 1129 (1988).
  9. [9]K. Rossnagel, On the origin of charge-density waves in select layered transition-metal dichalcogenides, Journal of Physics: Condensed Matter 23, 213001 (2011).
  10. [10]L. Li, E. O’Farrell, K. Loh, G. Eda, B. Özylilmaz, and A. C. Neto, Controlling many-body states by the electric-field effect in a two-dimensional material, Nature 529, 185 (2016).
  11. [11]E. Morosan, H. W. Zandbergen, B. Dennis, J. Bos, Y. Onose, T. Klimczuk, A. Ramirez, N. Ong, and R. J. Cava, Superconductivity in CuxTiSe2, Nature Physics 2, 544 (2006).
  12. [12]Y. I. Joe, X. Chen, P. Ghaemi, K. Finkelstein, G. de La Peña, Y. Gan, J. Lee, S. Yuan, J. Geck, G. MacDougall, et al., Emergence of charge density wave domain walls above the superconducting dome in 1T-TiSe2, Nature Physics 10, 421 (2014).
  13. [13]A. Kogar, G. A. de La Pena, S. Lee, Y. Fang, S.-L. Sun, D. B. Liou, G. Karapetrov, K. D. Finkelstein, J. P. Ruff, P. Abbamonte, et al., Observation of a charge density wave incommensuration near the superconducting domain CuxTiSe2, Physical review letters 118, 027002 (2017).
  14. [14]D. Jérome, T. Rice, and W. Kohn, Excitonic insulator, Physical Review 158, 462 (1967).
  15. [15]H. Hughes, Structural distortion in TiSe2 and related materials-a possible Jahn-Teller effect?, Journal of Physics C: Solid State Physics 10, L319 (1977).DOI
  16. [16]J. K. Seki, Y. Wakasaka, T. Kaneko, T. Toriyama, T. Konishi, T. Sudayama, N. Saini, M. Arita, H. Namatame, M. Taniguchi, et al., Excitonic bose-einstein condensation in Ta2NiSe5 above room temperature, Physical Review B 90, 155116 (2014).
  17. [17]A. Brinkman and H. Hilgenkamp, Electron-hole coupling in high-Tc cuprate superconductors, Physica C: Superconductivity 422, 71 (2005).
  18. [18]Z. Wang, D. A. Rhodes, K. Watanabe, T. Taniguchi, J. C. Hone, J. Shan, and K. F. Mak, Evidence of high-temperature exciton condensation in two-dimensional atomic double layers, Nature 574, 76 (2019).
  19. [19]Z. Wang, D. A. Rhodes, K. Watanabe, T. Taniguchi, J. C. Hone, J. Shan, and K. F. Mak, Evidence of high-temperature exciton condensation in two-dimensional atomic double layers, Nature 574, 76 (2019).DOI
  20. [20]A. S. Shkvarin, A. I. Merentsov, N. Tsud, and A. N. Titov, Effect of the titanium self-intercalation on the electronic structure of 1T-TiSe2, Inorganic Chemistry (2020).
  21. [21]L. Krasavin, A. Titov, and V. Antropov, Effect of intercalation by silver on the charge-density-wave state in TiSe2, Physics of the Solid State 40, 1962 (1998).DOI
  22. [22]M. D. Watson, O. J. Clark, F. Mazzola, I. Marković, V. Sunko, T. K. Kim, K. Rossnagel, and P. D. King, Orbital-and kz-selective hybridization of Se 4p and Ti 3d states in the charge density wave phase of TiSe2, Physical Review Letters 122, 076404 (2019).
  23. [23]P. Chen, Y.-H. Chan, X.-Y. Fang, Y. Zhang, M.-Y. Chou, S.-K. Mo, Z. Hussain, A.-V. Fedorov, and T.-C. Chiang, Charge density wave transition in single-layer titanium diselenide, Nature communications 6, 1 (2015).DOI
  24. [24]K. Rossnagel, L. Kipp, and M. Skibowski, Charge-density-wave phase transition in 1T-TiSe2: Excitonic insulator versus band-type jahn-teller mechanism, Physical Review B 65, 235101 (2002).
  25. [25]H. Cercellier, C. Monney, F. Clerc, C. Battaglia, L. Despont, M. Garnier, H. Beck, P. Aebi, L. Patthey, H. Berger, et al., Evidence for an excitonic insulator phase in 1T-TiSe2, Physical Review Letters 99, 146403 (2007).
  26. [26]B. Hildebrand, T. Jaouen, C. Didiot, E. Razzoli, G. Monney, M.-L. Mottas, A. Ubaldini, H. Berger, C. Barreteau, H. Beck, et al., Short-range phase coherence and origin of the 1T-TiSe2 charge density wave, Physical Review B 93, 125140 (2016).DOI
  27. [27]C. Monney, H. Cercellier, F. Clerc, C. Battaglia, E. Schrier, C. Didiot, M. G. Garnier, H. Beck, P. Aebi, H. Berger, et al., Spontaneous exciton condensation in 1T-TiSe2:BCS-like approach, Physical Review B 79, 045116 (2009).
  28. [28]C. Monney, C. Battaglia, H. Cercellier, P. Aebi, and H. Beck, Exciton condensation driving the periodic lattice distortion of 1T-TiSe2, Physical Review Letters 106, 106404 (2011).
  29. [29]M. Cazzaniga, H. Cercellier, M. Holzmann, C. Monney, P. Aebi, G. Onida, and V. Oleano, Ab initio many-body effects in 1T-TiSe2: A possible excitonic insulator scenario from gw band-shape renormalization, Physical Review B 85, 195111 (2012).
  30. [30]A. Kogar, M. S. Rak, S. Vig, A. A. Husain, F. Flicker, Y. I. Joe, L. Venema, G. J. MacDougall, T. C. Chiang, E. Fradkin, et al., Signatures of exciton condensation in a transition metal dichalcogenide, Science 358, 1314 (2017).
  31. [31]D. Snoke, Spontaneous bose coherence of excitons and polaritons, Science 298, 1368 (2002).
  32. [32]W. Kohn and D. Sherrington, Two kinds of bosons and bose condensates, Reviews of Modern Physics 42, 1 (1970).
  33. [33]J. Ishioka, Y. Liu, K. Shimatake, T. Kurosawa, K. Ichimura, Y. Toda, M. Oda, and S. Tanda, Chiral charge-density waves, Physical Review Letters 105, 176401 (2010).
  34. [34]J. Ishioka, T. Fujii, K. Katono, K. Ichimura, T. Kurosawa, M. Oda, and S. Tanda, Charge-parity symmetry observed through fridgel oscillations in chiral charge-density waves, Physical Review B 84, 245125 (2011).DOI
  35. [35]M. Lavarone, R. Di Capua, X. Zhang, M. Golalikihani, S. Moore, and G. Karapetrov, Evolution of the charge density wave state in CuxTiSe2, Physical Review B 85, 155103 (2012).
  36. [36]A. F. Kutsumartseva, B. Sipos, H. Berger, L. Forro, and E. Tutis, Pressure induced superconductivity in pristine 1T-TiSe2, Physical review letters 103, 236401 (2009).
  37. [37]E. Morosan, K. E. Wagner, L. L. Zhao, Y. Hor, A. J. Williams, J. Tao, Y. Zhu, and R. J. Cava, Multiple electronic transitions and superconductivity in PdxTiSe2, Physical Review B 81, 094524 (2010).DOI
  38. [38]J. S. Chen, J. K. Wang, S. V. Carr, S. C. Vogel, O. Gourdon, P. Dai, and E. Morosan, Chemical tuning of electrical transport in Ti1−xPtxSe2−y, Physical Review B 91, 045125 (2015).
  39. [39]2D Semiconductors, USA, https://www.2dsemiconductors.com/ (2018).
  40. [40]C. Slough, B. Giambattista, A. Johnson, W. McNairy, C. Wang, and R. Coleman, Scanning tunneling microscopy of 1T-TiSe2 and 1T-TiS2 at 77 and 4.2 k, Physical Review B 37, 6571 (1988).
  41. [41]B. Hildebrand, C. Didiot, A. M. Novello, G. Monney, A. Scarfato, A. Ubaldiini, H. Berger, D. Bowler, C. Renner, and P. Aebi, Doping nature of native defects in 1T-TiSe2, Physical review letters 112, 197001 (2014).
  42. [42]S. Fan, X. Zou, H. Du, L. Gan, C. Xu, W. Lv, Y.-B. He, Q.-H. Yang, F. Kang, and J. Li, Theoretical investigation of the intercalation chemistry of lithium/sodium ions in transition metal dichalcogenides, The Journal of Physical Chemistry C 121, 13599 (2017).DOI
  43. [43]M. M. May, C. Brabetz, C. Janowitz, and R. Manzke, The influence of different growth conditions on the charge density wave transition of TiSe2, Journal of Electron Spectroscopy and Related Phenomena 184, 180 (2011).
  44. [44]L. Sun, C. Chen, Q. Zhang, C. Sohrt, T. Zhao, G. Xu, J. Wang, D. Wang, K. Rossnagel, L. Gu, et al., Suppression of the charge density wave state in two-dimensional 1T-TiSe2 by atmospheric oxidation, Angewandte Chemie International Edition 56, 8981 (2017).DOI
  45. [45]T. Jaouen, B. Hildebrand, M.-L. Mottas, M. Di Giovannantonio, P. Ruffieux, M. Rumo, C. W. Nicholson, E. Razzoli, C. Barreteau, A. Ubaldini, et al., Phase separation in the vicinity of Fermi surface hot spots, Physical Review B 100, 075152 (2019).DOI
  46. [46]S. Yan, D. Laia, E. Morosan, E. Fradkin, P. Abbamonte, and V. Madhavan, Influence of domain walls in the incommensurate charge density wave state of Cu intercalated 1T-TiSe2, Physical Review Letters 118, 106405 (2017).DOI
  47. [47]R. Jishi and H. Alyahyaei, Electronic structure of superconducting copper intercalated transition metal dichalcogenides: First-principles calculations, Physical Review B 78, 144516 (2008).
  48. [48]A. M. Novello, B. Hildebrand, A. Scarfato, C. Didiot, G. Monney, A. Ubaldini, H. Berger, D. Bowler, P. Aebi, and C. Renner, Scanning tunneling microscopy of the charge density wave in 1T-TiSe2 in the presence of single atom defects, Physical Review B 92, 081101 (2015).
  49. [49]A. Zunger and A. J. Freeman, Band structure and lattice instability of TiSe2, Physical Review B 17, 1839 (1978).DOI
  50. [50]C. J. Arguello, S. P. Chockalingam, E. P. Rosenthal, L. Zhao, C. Gutiérrez, J. Kang, W. Chung, R. M. Fernandes, S. Jia, A. J. Millis, et al., Visualizing the charge density wave transition in 1H-NbSe2 in real space, Physical Review B 89, 235115 (2014).

Paper details

vlnc:W_efm6ujeh
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents