betaFeedback

WorksPhysics and Astronomy

Resolvent-based modeling of turbulent flow over multilayer compliant surfaces

Abstract

Compliant coatings offer a passive approach to modifying near-wall turbulence and potentially reducing skin-friction drag, but high-fidelity exploration of the coupled parameter space is costly. We develop a two-way coupled resolvent-Galerkin framework for turbulent channel flow over finite-thickness, layered viscoelastic coatings. The fluid is modeled using the Navier-Stokes equations linearized about a turbulent mean state, while the solid is represented by a through-thickness Galerkin discretization of the elastodynamic equations. The solid response is condensed into a spectral surface-impedance operator at the fluid-solid interface. At Reτ=180Re_τ= 180, stiff panels approach the rigid-wall response, whereas more compliant panels modify the low-rank response associated with the near-wall cycle. A Reynolds-number study shows that panels with fixed nondimensional material stiffness can produce different responses depending on whether their thickness scales with inner or outer flow length scales. The influence of viscoelastic damping is examined across low- and high-frequency regimes, where stiffness-proportional damping alters the high-frequency fractional-energy distribution, while the low-frequency distribution remains relatively insensitive to damping. For multilayer panels, the fluid-facing material determines the interfacial wave speed, while the subsurface stiffness distribution modifies the panel's effective thickness. Temporal stability analysis identifies regions of parameter space where a steady harmonic response is relevant and regions where instabilities grow. Finally, a leading-order, covariance-based drag-estimation framework relates the coupled response to changes in the mean flow and to the estimated skin-friction drag. Together, these tools provide a basis for screening coating designs and selecting candidates for high-fidelity simulations and experiments.

Introduction

Compliant coatings have long been investigated as a passive flow control technique for delaying laminar-turbulent transition, reducing turbulent skin-friction drag, and mitigating flow-induced noise [1]. For wall-bounded turbulent flows, interest has focused primarily on drag reduction given its economic significance. Skin friction is reported to contribute approximately 25–45% of the total drag for aerial platforms [2] and 80–90% for some marine vehicles [3]. Beyond their operational simplicity, passive techniques offer an alternative to active control by avoiding the need for complex sensing and actuation hardware [1], although their practical cost and maintenance depend on the implementation. Consequently, various passive techniques have been studied to reduce skin-friction drag, such as riblets, shark-skin-inspired denticles, superhydrophobic coatings, and large-eddy breakup devices [4]. Compliant surfaces differ from these alternatives in that they deform dynamically in response to turbulent pressure and shear fluctuations, thereby enabling bidirectional coupling between the flow and the underlying solid. Initial interest in compliant-wall drag reduction was stimulated by the experiments of Kramer [5, 6], who reported drag reductions of up to 60% for rubber-coated cylindrical bodies. Subsequent attempts to reproduce these results, however, yielded inconsistent outcomes [7, 8]. Early theoretical assessments suggested that drag reductions of this magnitude were unlikely and that, under the assumptions considered, favorable performance would require highly flexible, weakly damped materials with a solid-to-fluid density ratio, ρs/ρf\rho_s/\rho_f, close to unity [7]. Although compliant panels can delay transition in laminar boundary layers [9, 10, 11], their interaction with turbulent flows is still not well understood, with prior reviews reporting mixed outcomes [1, 7, 12, 13]. More recently, as a result of advances in experimental diagnostics [14, 15, 16, 17, 18, 19] and access to large-scale high-fidelity simulation capabilities [20, 21, 22, 23], the focus has broadened beyond determining whether compliant walls reduce drag to understanding the physical mechanisms governing the coupled interaction between compliant coatings and turbulent flows.

Previous Studies

Experimental studies have reported a wide range of responses to wall compliance. For a turbulent boundary layer (TBL) over a single-layer viscoelastic coating, Lee et al. [24] observed wider spanwise spacing and greater streamwise coherence for near-wall streaks, together with local reductions in skin-friction coefficient and Reynolds stress. In separate experimental campaigns, Kulik et al. [25] and Choi et al. [26] found drag reductions up to 20% and 7%, respectively, for relatively stiff coatings, while avoiding the large deformations and surface instabilities associated with softer materials. These and subsequent studies also emphasized the importance of including the frequency dependence of material properties in modeling the interaction [27, 28, 29]. Using simultaneous three-dimensional flow and two-dimensional surface-deformation measurements, Zhang et al. [14] identified deformation waves traveling at phase speeds of 0.72U00.72U_0 and U0U_0; however, their r.m.s. surface-deformation amplitudes were much smaller than the viscous length scale, and the authors concluded that they did not appreciably affect the flow under the conditions studied. Here, U0U_0 denotes the channel centerline velocity or the boundary-layer freestream velocity, depending on the configuration.

Subsequent experiments employed softer materials to obtain deformations comparable to the viscous length scale [15, 16, 17]. Lu et al. [16] reported deformation waves traveling at approximately 0.53U00.53U_0 with wavelength close to three times the coating thickness. They also found that their results, as well as those of other studies, follow an almost linear scaling between the r.m.s. deformation normalized by coating thickness and the r.m.s. pressure fluctuation normalized by material shear modulus. Lu et al. [17] further showed that even though deformation amplitudes increase with Reynolds number, the correlation between the flow and surface deformation weakens. By varying material stiffness, Greidanus et al. [19] identified different interaction regimes based on the ratio of the bulk flow velocity to the coating shear-wave speed and reported increased skin-friction drag in strongly coupled cases. These results suggest that stronger two-way coupling can be accompanied by increased drag, depending on the material and flow conditions [16, 19]. Although compliant coatings have historically been studied primarily in marine hydrodynamic flows, recent studies have also investigated their use for drag reduction in high-speed aerodynamic flows [30, 31, 32].

High-fidelity simulations have likewise observed mixed drag trends. Typically, compliant walls have been modeled either as spring-backed membranes and other surface-based models [33, 34, 35], or, more recently, as finite-thickness volume-based models [20, 21, 22, 23], following the terminology introduced by Carpenter [36]. Depending on the model and the parameters of fluid and solid phases, simulations have predicted drag reduction [33, 37], drag increase [20, 22], or little change [34]. For example, Fukagata et al. [37] reported an 8% drag reduction associated with reduced near-wall Reynolds shear stress. At Reτ=138Re_\tau= 138, Kim and Choi [35] found little change in skin friction or near-wall structure for stiffer walls, whereas a softer wall supported quasi-two-dimensional traveling waves and increased total drag through an additional form-drag contribution. Using a finite-thickness volume-based model, Rosti and Brandt [20] found that material elasticity generally increased skin friction, and Esteghamatian et al. [22] similarly reported greater skin-friction drag at a compliant wall than at a rigid wall. To separate the effects of fluid–structure-interaction (FSI)-induced wall motion from those due to a deformed surface, Koseki et al. [23] compared compliant walls with rigid rough walls having similar roughness statistics. Although the deformed rigid walls reproduced several trends observed for compliant walls, differences remained between the rigid-wall and fully coupled cases.

High-fidelity simulations become increasingly expensive at application-relevant Reynolds numbers, while experiments do not always provide sufficient access to the flow-field details needed to identify the mechanisms underlying the coupled response. Broad parametric studies can therefore be demanding with either approach. Reduced-order models remain valuable for identifying dominant mechanisms and screening regions of the design space for further investigation.

One class of theoretical models treats the deformation of a compliant solid as a one-way response to prescribed unsteady forcing intended to represent turbulent fluctuations [27, 28, 38, 39]. Within this class, Benschop et al. [40] used the shear-stress and pressure spectra from a rigid-wall DNS to predict the deformation of a finite-thickness viscoelastic solid while varying its density, compressibility, stiffness, thickness, and viscoelasticity. Rempfer et al. [41] instead developed a low-dimensional model by projecting the Navier–Stokes equations onto Karhunen-Loève modes obtained from a rigid-wall DNS, wherein the compliant wall was represented by a spring–mass–damper system. In resolvent-based models, the turbulent flow is instead represented through the amplification of disturbances by the linearized dynamics, while the compliant wall is often approximated by a spring–mass–damper system [42, 43]. These simplified approaches illustrate a recurring compromise: models with detailed structural physics often simplify or prescribe the flow, whereas models that retain more of the turbulent dynamics generally idealize the solid [44]. The present work builds on these approaches by coupling a resolvent formulation for the turbulent flow with a Galerkin-based model of a finite-thickness multilayered viscoelastic solid, enabling the effects of frequency-dependent viscoelastic response and subsurface architecture on the coupled dynamics to be examined.

Resolvent-based Model

Resolvent analysis recasts the Navier–Stokes equations linearized about a mean flow as an input–output system in the frequency domain, with nonlinear interactions treated as forcing to the linear dynamics [45]. It provides an efficient framework for identifying amplification mechanisms and coherent response structures and, when combined with a model or measurement of the forcing, for estimating flow statistics [46, 47, 48, 49, 50, 51, 52]. Resolvent-based methods have also been used for flow estimation [53, 54, 55, 56] and control [57, 58, 59]. While most resolvent-based studies on wall-bounded turbulence have focused on smooth, rigid walls, recently resolvent-based modeling has also been used to study flows over complex surfaces, including rough, permeable, and frequency-tuned surfaces [60, 61, 62].

Most resolvent formulations for compliant walls have represented the interface through a pointwise spring-mass-damper relation. Luhar et al. [42] found that favorably modifying the energetic near-wall cycle required unphysical negative damping, whereas very-large-scale motions could be modified using positive damping; however, walls optimized for these large-scale motions amplified disturbances at other scales. Luhar et al. [43] extended this formulation to include effects due to material stiffness, tension and directional anisotropy. Huynh et al. [63] subsequently showed that the influence of a compliant wall could be represented as deterministic forcing to the corresponding rigid-wall system. [64] used structured input-output analysis along with a spring-mass-damper model for the compliant wall to determine optimal compliant wall parameters and observed that walls optimized for one scale—either near-wall streaks or very-large-scale motions (VLSMs)—tend to amplify motions at other scales. Recently, [32] employed a resolvent-based framework for turbulent boundary layers over isotropic viscoelastic coatings and found that potential reductions in skin-friction drag are strongly constrained by hydroelastic instabilities, with a narrow stable operating range in supersonic flow. While most of the resolvent-based work on the modeling of compliant wall interaction has been restricted to parallel mean flows that vary only in the wall-normal direction, Pfister et al. [65] applied resolvent analysis to a finite-length viscoelastic patch in a spatially developing two-dimensional laminar boundary layer.

These formulations linearize the coupled dynamics about an undeformed interface and are most applicable when surface displacement and slope are sufficiently small for nonlinear geometric effects to be neglected. For example, Huynh et al. [63] reported deformation amplitudes of O(10−4δ)O(10^{-4}\delta) at us/U0=3.63u_s/U_0 = 3.63. Extending an efficient linear framework to resolve multilayer viscoelastic response and the influence of subsurface architecture remains an important modeling challenge.

Outstanding Modeling Challenges

Existing models of compliant-wall turbulence face three related challenges: capturing the relevant turbulent-flow dynamics, representing the structural response with sufficient physical fidelity, and identifying the dynamical regime in which the coupled system operates. One-way models with prescribed forcing or wall motion cannot capture the feedback through which wall deformation modifies the flow and, in turn, the forcing on the wall.

Many reduced-order formulations represent the solid using a surface-based spring–mass–damper model with wall-normal displacement only, thereby neglecting tangential deformation and explicit shear-stress forcing [7]. The latter may become particularly important at low wavenumbers [14]. Duncan [44] showed that surface-based models can reproduce some responses, such as deformation waves in the solid driven by pressure fluctuations, but may provide only qualitative predictions for others, including the stability of surface waves at high flow speeds. Moreover, it is difficult to translate the effective parameters of the spring-mass-damper models to experiments and real-world applications [44].

These limitations are especially restrictive for biological and engineered coatings that are finite-thickness, multilayered, anisotropic or structurally heterogeneous. Dolphin skin, one of the original inspirations for compliant-wall studies, contains layered tissue and embedded features such as dermal ridges and papillae [66]. Similarly, the “stubbed” and “ribbed” coatings in Kramer’s original experiments incorporated fluid-filled inclusions or streamwise structural supports [5, 6]; moreover, Kramer [67] noted that favorable results were observed only after transitioning from single-layer to three-layer coatings. Anisotropic panels have also shown advantages over isotropic panels for transition-control applications [10]. These observations motivate volume-based continuum formulations in which finite thickness, layering, anisotropy and embedded structures can be represented directly rather than absorbed into effective interface parameters. In the present work, we focus on coatings whose properties vary through the thickness; the treatment of anisotropy and discrete embedded structures is left for future study.

Even with an adequate structural representation, the drag response depends strongly on the hydroelastic regime. Compliant-wall systems support several instabilities whose onset and character are jointly governed by the flow conditions and material properties. Gad-el Hak [13] summarizes several classification frameworks: classes A, B and C [68]; fluid- and solid-based mechanisms [69, 70]; and convective and absolute instabilities [71]. Static-divergence waves and traveling-wave flutter are two commonly encountered flow-induced surface instabilities [13]. Because these mechanisms alter the amplitude, phase, and propagation of the wall response relative to the turbulent forcing, studies conducted in different regimes need not exhibit comparable drag trends. Characterizing the stability and dynamical regime is therefore important when interpreting and comparing performance across configurations.

Comparison among previous studies is further complicated by limited overlap in their governing parameters. For example, the drag reductions reported for the relatively stiff coatings of Kulik et al. [25] and Choi et al. [26] cannot be compared directly with results for substantially softer materials because the configurations may occupy different dynamical regimes. Whereas ReτRe_\tau often serves as a useful primary descriptor for rigid-wall turbulence, characterizing the relation between inner and outer scales, compliant-wall systems require additional measures of structural scales and coupling strength. Three groups of parameters are particularly relevant: those describing the turbulent state, such as ReτRe_\tau; ratios comparing material thickness with viscous and outer length scales, such as t/δνt/\delta_\nu and t/δt/\delta; and ratios comparing characteristic solid and fluid velocity or stiffness scales, such as us/U0u_s/U_0 and E/(ρfU02)E/(\rho_f U_0^2). Here, tt is the coating thickness, δν\delta_\nu is the viscous length scale, and δ\delta denotes the boundary-layer thickness for the cited boundary-layer studies or the channel half-height in the present calculations. The quantities ρf\rho_f, usu_s, U0U_0, and EE denote the fluid density, solid shear-wave speed, freestream or centerline velocity, and Young’s modulus, respectively. Few studies match all three groups simultaneously. Consequently, differences in reported drag may conflate changes in the turbulence state, fluid-solid coupling strength, and structural-wave dynamics rather than indicate fundamentally contradictory behavior.

Together, these considerations motivate a framework that retains a physically interpretable representation of turbulent amplification, resolves the finite-thickness material response, and permits a systematic exploration of the relevant flow and structural parameters.

Paper Outline

The present work develops a two-way coupled framework that combines a resolvent representation of the turbulent flow with a volume-based Galerkin model of a finite-thickness viscoelastic solid. Consistent kinematic and dynamic interface conditions couple the fluid velocity to the material motion and transmit both pressure and shear-stress fluctuations to the solid. Figure 1 summarizes the physical configuration, the through-thickness representation of the viscoelastic coating, and the reduction of the solid-domain equations to a frequency- and wavenumber-dependent interface operator that will be discussed later in this paper.

Figure 1. Physical configuration and coupled resolvent–Galerkin formulation. (a) Turbulent channel flow over a finite-thickness viscoelastic coating bonded to a rigid substrate. Pressure and shear tractions drive all three components of the surface displacement. (b) Coating consisting of NℓN_\ell material layers which are further discretized cumulatively into NsN_s layers using through-thickness Galerkin discretization of the coating, allowing the material properties to vary with wall-normal position. The lower surface is clamped. (c) Dynamic condensation defines the displacement-based surface-impedance operator M(kx,kz,ω)\mathcal{M}(k_x,k_z,\omega), which is introduced into the fluid boundary condition through Ψ=BuM−1BT\boldsymbol{\Psi} = \boldsymbol{B}_u\mathcal{M}^{-1}\boldsymbol{B}_T.

The presented formulation can be viewed as combining the complementary strengths of the two-way resolvent model of Luhar et al. [42], which retains the amplification mechanisms of the turbulent flow but idealizes the wall as a spring-mass-damper system, and the one-way model of Benschop et al. [40], which resolves a finite-thickness viscoelastic layer but prescribes the forcing from rigid-wall flow statistics. The resulting framework retains the efficiency of a linear input-output formulation while accommodating finite thickness, viscoelastic effects, and through-thickness inhomogeneity via layering.

The coupled model is further integrated with a stochastic drag-estimation framework [72, 73]. With an assumed forcing model and an eddy-viscosity closure, this extends the analysis beyond individual resolvent modes to estimates of turbulent kinetic energy, mean-flow modification, and changes in skin-friction drag. The framework, therefore, provides a systematic means of relating design variables such as material properties and architecture to the amplification of energetic turbulent structures and to drag-relevant flow statistics.

In § 2, we derive the coupled resolvent formulation and interface conditions. Section § 3 verifies the solid and fluid solvers, and § 4 examines the temporal stability of the coupled system. Section § 5 analyzes the solid response and the coupled resolvent response for single-layer and multilayer coatings. Section § 6 integrates the resolvent model with a leading-order drag-estimation framework. Finally, § 7 summarizes the main findings, design implications, and directions for future work.

Numerical Method

Problem setup and governing equations

We consider fully developed turbulent channel flow between a rigid upper wall and a lower wall that is either rigid or compliant. The channel height is 2δ2\delta, and the mean position of the lower wall is y∗=0y^* = 0. Dimensional quantities are denoted by a superscript ∗*, except for the channel half-height δ\delta, for which the superscript is omitted to distinguish it from the conventional notation for boundary-layer displacement thickness. The fluid is governed by the incompressible Navier–Stokes equations,

∂ui∂T+uj∂ui∂xj=−∂p∂xi+1Reτ∂2ui∂xj∂xj,(1)\frac{\partial u_i}{\partial\mathcal{T}} + u_j\frac{\partial u_i}{\partial x_j} = -\frac{\partial p}{\partial x_i} + \frac{1}{Re_\tau}\frac{\partial^2 u_i}{\partial x_j\partial x_j}, \tag*{(1)}
∂ui∂xi=0.(2)\frac{\partial u_i}{\partial x_i} = 0. \tag*{(2)}

Here, uiu_i and xix_i denote the nondimensional velocity component and coordinate in direction ii, respectively, and repeated indices imply summation. The variables pp and T\mathcal{T} denote nondimensional pressure and time. The equations are nondimensionalized using the channel half-height δ\delta, the friction velocity uτ∗u_\tau^* of the rigid-wall reference flow, and the fluid density ρf∗\rho_f^*. The associated pressure and time scales used here are ρf∗uτ∗2\rho_f^*u_\tau^{*2} and δ/uτ∗\delta/u_\tau^*, respectively; thus T=T∗uτ∗/δ\mathcal{T} = \mathcal{T}^*u_\tau^*/\delta indicates non-dimensional time, whereas t=t∗/δt = t^*/\delta denotes coating thickness. The friction Reynolds number ReτRe_\tau is defined as Reτ=uτ∗δ/ν∗Re_\tau= u_\tau^*\delta/\nu^*, where ν∗\nu^* is the kinematic viscosity. Quantities expressed in inner units based on the reference friction velocity uτ∗u_\tau^* and viscous length ν∗/uτ∗\nu^*/u_\tau^* are denoted by a superscript ++. Calculations are performed at Reτ=180Re_\tau= 180, 550, 950, and 2000. The corresponding mean velocity profiles are taken from the channel-flow DNS database https://turbulence.oden.utexas.edu/data/channels/profiles/ [74, 75, 76, 77] and are used as rigid-wall reference mean states for the compliant-wall analysis.

Linearized Navier–Stokes equations and resolvent model for a compliant wall

We decompose the flow state as q=q‾+q′q = \overline{q} + q', where q=[u,p]Tq = [u,p]^T, u=(u,v,w)Tu = (u,v,w)^T, and pp are the state vector, velocity vector, and pressure, respectively. Throughout the paper, (⋅)(\cdot) indicates the time-averaged mean flow and (⋅)′(\cdot)' indicates a perturbation from the mean. The linearized Navier–Stokes (LNS) equations with nonlinear forcing can be written as

B∂q′∂T=Aq′+f′,(3)\mathbf{B}\frac{\partial q'}{\partial\mathcal{T}} = \mathbf{A}q' + f', \tag*{(3)}

Here, A\mathbf{A} is the Navier–Stokes operator linearized about q‾\overline{q}, and f′f' contains the fluctuating nonlinear terms and any externally imposed momentum forcing. The forcing component associated with the continuity equation is zero. The descriptor matrix B\mathbf{B} has identity blocks for the velocity equations and a zero block for the algebraic incompressibility constraint. We consider a statistically stationary, fully developed turbulent flow whose mean velocity is independent of the wall-parallel coordinates and time. Fourier decomposition in the wall-parallel directions and time expresses the disturbance field as a superposition of modes:

q′(x,y,z,T)=∑k,ωq^k(y)ei(kxx+kzz−ωT).(4)\boldsymbol{q}'(x,y,z,\mathcal{T})=\sum_{k,\omega}\hat{\boldsymbol{q}}_k(y)e^{i(k_xx+k_zz-\omega\mathcal{T})}. \tag*{(4)}

Here, k\boldsymbol{k} represents the wavenumber-frequency triplet (kx,kz,ω)(k_x,k_z,\omega), where kxk_x, kzk_z, and ω\omega are the streamwise wavenumber, spanwise wavenumber, and angular frequency, respectively;  ^\hat{\ } is used to denote variables after the Fourier transform. Explicit forms of the operators A\mathbf{A} and B\mathbf{B} are given in Appendix § 12. For a stable matrix pencil (A,B)(\mathbf{A},\mathbf{B}), the equation (3) gives the asymptotic frequency-domain response

q^k=(−iωB−A)−1f^k=H(kx,kz,ω)f^k,(5)\hat{\boldsymbol{q}}_k=(-i\omega\mathbf{B}-\mathbf{A})^{-1}\hat{\boldsymbol{f}}_k=\mathbf{H}(k_x,k_z,\omega)\hat{\boldsymbol{f}}_k, \tag*{(5)}

References

  1. [1]Mohamed Gad-el-Hak. Drag reduction using compliant walls. In Peter W. Carpenter and Timothy J. Pedley, editors, Flow Past Highly Compliant Boundaries and in Collapsible Tubes, pages 191–229, Dordrecht, 2003. Springer Netherlands. ISBN 978-94-017-0415-1.
  2. [2]Michael C. Fischer and Robert L. Ash. A general review of concepts for reducing skin friction, including recommendations for future studies. NASA Technical Memorandum NASA TM X-2894, NASA Langley Research Center, 1974. URL https://ntrs.nasa.gov/citations/19740009864.
  3. [3]H. Lackenby. The thirty-fourth thomas lowe gray lecture: Resistance of ships, with special reference to skin friction and hull surface condition. Proceedings of the Institution of Mechanical Engineers, 176 (1):981–1014, 1962. doi: 10.1243/PIME_PROC\_1962\_176\_077\_02.DOI
  4. [4]Marc Perlin, David R. Dowling, and Steven L. Ceccio. Freeman Scholar Review: Passive and Active Skin-Friction Drag Reduction in Turbulent Boundary Layers. Journal of Fluids Engineering, 138(9): 091104, 06 2016. ISSN 0098-2202. doi: 10.1115/1.4033295. URL https://doi.org/10.1115/1.4033295.
  5. [5]Max O. Kramer. Boundary layer stabilization by distributed damping. Journal of the American Society for Naval Engineers, 72(1):25–34, 1960. doi: https://doi.org/10.1111/j.1559-3584.1960.tb02356.x.
  6. [6]Max O. Kramer. Boundary layer stabilization by distributed damping. Naval Engineers Journal, 74(2):341–348, 1962. doi: https://doi.org/10.1111/j.1559-3584.1962.tb05568.x. URL https://onlinelibrary.wiley.com/doi/abs/10.1111/j.1559-3584.1962.tb05568.x.
  7. [7]J J Riley, M Gad-el-Hak, and R W Metcalfe. Compliant coatings. Annual Review of Fluid Mechanics, 20:393–420, 1988. ISSN 1545-4479. doi: https://doi.org/10.1146/annurev.fl.20.010188.002141. URL https://www.annualreviews.org/content/journals/10.1146/annurev.fl.20.010188.002141.
  8. [8]Frank E. Fish. Imaginative solutions by marine organisms for drag reduction. In Proceedings of the International Symposium onSeawater Drag Reduction, pages 443–450, Newport, Rhode Island, 1998.
  9. [9]T. Lee, M. Fisher, and W. H. Schwarz. Investigation of the effects of a compliant surface on boundary-layer stability. Journal of Fluid Mechanics, 288:37–58, 1995. doi: 10.1017/S0022112095001054.DOI
  10. [10]Peter W. Carpenter and Philip J. Morris. The effect of anisotropic wall compliance on boundary-layer stability and transition. Journal of Fluid Mechanics, 218:171–223, 1990. doi: 10.1017/S0022112090000970.DOI
  11. [11]Christopher Davies and Peter W. Carpenter. Numerical simulation of the evolution of tollmien–schlichting waves over finite compliant panels. Journal of Fluid Mechanics, 335:361–392, 1997. doi: 10.1017/S0022112096004636.DOI
  12. [12]Dennis M. Bushnell, Jerry N. Hefner, and Robert L. Ash. Effect of compliant wall motion on turbulent boundary layers. The Physics of Fluids, 20(10):S31–S48, 10 1977. ISSN 0031-9171. doi: 10.1063/1.861756. URL https://doi.org/10.1063/1.861756.
  13. [13]Mohamed Gad-el Hak. Compliant coatings: A decade of progress. Applied Mechanics Reviews, 49 (10S):S147–S157, 10 1996. ISSN 0003-6900. doi: 10.1115/1.3101966. URL https://doi.org/10.1115/1.3101966.
  14. [14]Cao Zhang, Jin Wang, William Blake, and Joseph Katz. Deformation of a compliant wall in a turbulent channel flow. Journal of Fluid Mechanics, 823:345–390, 2017. doi: 10.1017/jfm.2017.299.
  15. [15]Jin Wang, Subhra Shankha Koley, and Joseph Katz. On the interaction of a compliant wall with a turbulent boundary layer. Journal of Fluid Mechanics, 899:A20, 2020. doi: 10.1017/jfm.2020.446.DOI
  16. [16]Yuhui Lu, Tianrui Xiang, Tamer A. Zaki, and Joseph Katz. On the scaling and critical layer in a turbulent boundary layer over a compliant surface. Journal of Fluid Mechanics, 980:R2, 2024. doi: 10.1017/jfm.2024.11.DOI
  17. [17]Yuhui Lu, Tianrui Xiang, Tamer A. Zaki, and Joseph Katz. Analysis of flow-wall deformation coupling in high reynolds number compliant wall boundary layers. Journal of Fluid Mechanics, 1019:A54, 2025. doi: 10.1017/jfm.2025.10596.DOI
  18. [18]David Huynh and Beverley McKeon. Measurements of a turbulent boundary layer-compliant surface system in response to targeted, dynamic roughness forcing. Experiments in Fluids, 61(4):94, March 2020. ISSN 1432-1114. doi: 10.1007/s00348-020-2933-9. URL https://doi.org/10.1007/s00348-020-2933-9.
  19. [19]A.J. Greidanus, R. Delfos, S.J. Picken, and J. Westerweel. Response regimes in the fluid–structure interaction of wall turbulence over a compliant coating. Journal of Fluid Mechanics, 952:A1, 2022. doi: 10.1017/jfm.2022.774.DOI
  20. [20]Marco E. Rosti and Luca Brandt. Numerical simulation of turbulent channel flow over a viscous hyper-elastic wall. Journal of Fluid Mechanics, 830:708–735, 2017. doi: 10.1017/jfm.2017.617.DOI
  21. [21]Marco E. Rosti and Luca Brandt. Low Reynolds number turbulent flows over elastic walls. Physics of Fluids, 32(8):083109, 08 2020. ISSN 1070-6631. doi: 10.1063/5.0018770. URL https://doi.org/10.1063/5.0018770.
  22. [22]Amir Esteghamatian, Joseph Katz, and Tamer A. Zaki. Spatiotemporal characterization of turbulent channel flow with a hyperelastic compliant wall. Journal of Fluid Mechanics, 942:A35, 2022. doi: 10.1017/jfm.2022.354.DOI
  23. [23]Morie Koseki, M.S. Aswathy, and Marco Edoardo Rosti. Understanding the effect of wall elasticity in turbulent channel flows. Journal of Fluid Mechanics, 1021:A4, 2025. doi: 10.1017/jfm.2025.10703.DOI
  24. [24]T. Lee, M. Fisher, and W. H. Schwarz. Investigation of the stable interaction of a passive compliant surface with a turbulent boundary layer. Journal of Fluid Mechanics, 257:373–401, 1993. doi: 10.1017/S002211209300312X.DOI
  25. [25]V. M. Kulik, I. S. Poguda, and B. N. Semenov. Experimental investigation of one-layer viscoelastic coatings action on turbulent friction and wall pressure pulsations. In K.-S. Choi, editor, Recent Developments in Turbulence Management, pages 263–289. Springer Netherlands, Dordrecht, 1991. ISBN 978-94-011-3526-9. doi: 10.1007/978-94-011-3526-9_14. URL https://doi.org/10.1007/978-94-011-3526-9_14.
  26. [26]K.–S. Choi, X. Yang, B. R. Clayton, E. J. Glover, M. Atlar, B. N. Semenov, and V. M. Kulik. Turbulent drag reduction using compliant surfaces. Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, 453(1965):2229–2240, October 1997. ISSN 1364-5021, 1471-2946. doi: 10.1098/rspa.1997.0119. URL https://royalsocietypublishing.org/doi/10.1098/rspa.1997.0119.DOI
  27. [27]Victor M. Kulik, Inwon Lee, and H. H. Chun. Wave properties of coating for skin friction reduction. Physics of Fluids, 20(7):075109, 07 2008. ISSN 1070-6631. doi: 10.1063/1.2952598. URL https://doi.org/10.1063/1.2952598.
  28. [28]V.M. Kulik. Action of a turbulent flow on a hard compliant coating. International Journal of Heat and Fluid Flow, 33(1):232–241, 2012. ISSN 0142-727X. doi: https://doi.org/10.1016/j.ijheatfluidflow.2011.10.003. URL https://www.sciencedirect.com/science/article/pii/S0142727X11001342.
  29. [29]V. M. Kulik, A. V. Boiko, and I. Lee. Drag reduction by compliant coatings made of a homogeneous material. Thermophysics and Aeromechanics, 25(4):515–524, Jul 2018. ISSN 1531-8699. doi: 10.1134/S0869864318040054. URL https://doi.org/10.1134/S0869864318040054.
  30. [30]Soumen Chakravarty, Dhyanam Patel, and Venkateswaran Narayanaswamy. Analysis of turbulent skin friction for supersonic flow over stiff viscoelastic coatings. In AIAA AVIATION FORUM AND ASCEND 2024, 2024. doi: 10.2514/6.2024-3884. URL https://arc.aiaa.org/doi/abs/10.2514/6.2024-3884.DOI
  31. [31]Soumen Chakravarty and V. Narayanaswamy. Investigations of skin friction drag mitigation over viscoelastic surfaces in supersonic flows. Phys. Rev. Fluids, 9:054609, May 2024. doi: 10.1103/PhysRevFluids.9.054609. URL https://link.aps.org/doi/10.1103/PhysRevFluids.9.054609.DOI
  32. [32]Soumen Chakravarty and Venkat Narayanaswamy. Resolvent analysis to inform viscoelastic coatings for turbulent drag reduction, 2026. URL https://arxiv.org/abs/2608.26611.
  33. [33]Takahide Endo and Ryutaro Himeno. Direct numerical simulation of turbulent flow over a compliant surface. Journal of Turbulence, 3:N7, 2002. doi: 10.1088/1468-5248/3/1/007. URL https://doi.org/10.1088/1468-5248/3/1/007.
  34. [34]S. Xu, D. Rempfer, and J. Lumley. Turbulence over a compliant surface: numerical simulation and analysis. Journal of Fluid Mechanics, 478:11–34, March 2003. ISSN 0022-1120, 1469-7645. doi: 10.1017/S0022112002003324. URL https://www.cambridge.org/core/product/identifier/S0022112002003324/type/journal_article.DOI
  35. [35]Euiyoung Kim and Haecheon Choi. Space–time characteristics of a compliant wall in a turbulent channel flow. Journal of Fluid Mechanics, 756:30–53, 2014. doi: 10.1017/jfm.2014.444.DOI
  36. [36]P. W. Carpenter. Status of transition delay using compliant walls. In D. M. Bushnell and J. N. Hefner, editors, Viscous Drag Reduction in Boundary Layers, volume 123 of Progress in Astronautics and Aeronautics, pages 79–113. AIAA, 1990. doi: 10.2514/5.9781600865978.0079.0113. URL https://arc.aiaa.org/doi/abs/10.2514/5.9781600865978.0079.0113.DOI
  37. [37]Koji Fukagata, Stefan Kern, Philippe Chatelain, Petros Koumoutsakos, and Nobuhide Kasagi. Evolutionary optimization of an anisotropic compliant surface for turbulent friction drag reduction. Journal of Turbulence, 9:N35, 2008. doi: 10.1080/14685240802441126.DOI
  38. [38]James H. Duncan. The response of an incompressible, viscoelastic coating to pressure fluctuations in a turbulent boundary layer. Journal of Fluid Mechanics, 171:339–363, 1986. doi: 10.1017/S0022112086001477.DOI
  39. [39]David M. Chase. Generation of fluctuating normal stress in a viscoelastic layer by surface shear stress and pressure as in turbulent boundary-layer flow. The Journal of the Acoustical Society of America, 89 (6):2589–2596, 06 1991. ISSN 0001-4966. doi: 10.1121/1.400698. URL https://doi.org/10.1121/1.400698.
  40. [40]H. O. G. Benschop, A. J. Greidanus, R. Delfos, J. Westerweel, and W.-P. Breugem. Deformation of a linear viscoelastic compliant coating in a turbulent flow. Journal of Fluid Mechanics, 859:613–658, 2019. doi: 10.1017/jfm.2018.813.DOI
  41. [41]Dietmar Rempfer, Peter Blossey, Louise Parsons, and John Lumley. Low-dimensional dynamical model of a turbulent boundary layer over a compliant surface: Preliminary results. In John L. Lumley, editor, Fluid Mechanics and the Environment: Dynamical Approaches, pages 267–283, Berlin, Heidelberg, 2001. Springer Berlin Heidelberg. ISBN 978-3-540-44512-8.DOI
  42. [42]M. Luhar, A.S. Sharma, and B.J. McKeon. A framework for studying the effect of compliant surfaces on wall turbulence. Journal of Fluid Mechanics, 768:415–441, 2015. doi: 10.1017/jfm.2015.85.DOI
  43. [43]M. Luhar, A. S. Sharma, and B. J. McKeon. On the design of optimal compliant walls for turbulence control. Journal of Turbulence, 17(8):787–806, 2016. doi: 10.1080/14685248.2016.1181267.DOI
  44. [44]J.H. Duncan. A comparison of wave propagation on the surfaces of simple membrane walls and elastic coatings bounded by a fluid flow. Journal of Sound and Vibration, 119(3):565–573, 1987. ISSN 0022-460X. doi: https://doi.org/10.1016/0022-460X(87)90416-0. URL https://www.sciencedirect.com/science/article/pii/0022460X87904160.
  45. [45]B. J. McKeon and A. S. Sharma. A critical-layer framework for turbulent pipe flow. Journal of Fluid Mechanics, 658:336–382, 2010. doi: 10.1017/S002211201000176X.DOI
  46. [46]Jinah Jeun, Joseph W. Nichols, and Mihailo R. Jovanović. Input-output analysis of high-speed axisymmetric isothermal jet noise. Physics of Fluids, 28(4):047101, 04 2016. ISSN 1070-6631. doi: 10.1063/1.4946886.DOI
  47. [47]Oliver T. Schmidt, Aaron Towne, Georgios Rigas, Tim Colonius, and Guillaume A. Brès. Spectral analysis of jet turbulence. Journal of Fluid Mechanics, 855:953–982, 2018. doi: 10.1017/jfm.2018.675.DOI
  48. [48]Chi-An Yeh and Kunihiko Taira. Resolvent-analysis-based design of airfoil separation control. Journal of Fluid Mechanics, 867:572–610, 2019. doi: 10.1017/jfm.2019.163.DOI
  49. [49]J.H. Marques Ribeiro, Chi-An Yeh, and Kunihiko Taira. Triglobal resolvent analysis of swept-wing wakes. Journal of Fluid Mechanics, 954:A42, 2023. doi: 10.1017/jfm.2022.1033.
  50. [50]Yiyang Sun, Qiong Liu, Louis N. Cattafesta III, Lawrence S. Ukeiley, and Kunihiko Taira. Resolvent analysis of compressible laminar and turbulent cavity flows. AIAA Journal, 58(3):1046–1055, 2020. doi: 10.2514/1.J058633. URL https://doi.org/10.2514/1.J058633.
  51. [51]Qiong Liu, Yiyang Sun, Chi-An Yeh, Lawrence S. Ukeiley, Louis N. Cattafesta, and Kunihiko Taira. Unsteady control of supersonic turbulent cavity flow based on resolvent analysis. Journal of Fluid Mechanics, 925:A5, 2021. doi: 10.1017/jfm.2021.652.DOI
  52. [52]N. Bonne, V. Brion, E. Garnier, R. Bur, P. Molton, D. Sipp, and L. Jacquin. Analysis of the two-dimensional dynamics of a mach 1.6 shock wave/transitional boundary layer interaction using a rans based resolvent approach. Journal of Fluid Mechanics, 862:1166–1202, 2019. doi: 10.1017/jfm.2018.932.DOI
  53. [53]Aaron Towne, Adrián Lozano-Durán, and Xiang Yang. Resolvent-based estimation of space–time flow statistics. Journal of Fluid Mechanics, 883:A17, 2020. doi: 10.1017/jfm.2019.854.DOI
  54. [54]Eduardo Martini, André V. G. Cavalieri, Peter Jordan, Aaron Towne, and Lutz Lesshafft. Resolvent-based optimal estimation of transitional and turbulent flows. Journal of Fluid Mechanics, 900:A2, 2020. doi: 10.1017/jfm.2020.435.DOI
  55. [55]F. R. Amaral, A. V.G. Cavalieri, E. Martini, P. Jordan, and A. Towne. Resolvent-based estimation of turbulent channel flow using wall measurements. Journal of Fluid Mechanics, 927:A17, 2021. doi: 10.1017/jfm.2021.764.DOI
  56. [56]Aaron Towne, Rutvij Bhagwat, Yuhao Zhou, Junoh Jung, Eduardo Martini, Peter Jordan, Diego Audiffred, Igor Maia, and André Cavalieri. Resolvent-based estimation of wavepackets in turbulent jets. In 30th AIAA/CEAS Aeroacoustics Conference (2024), 2024. doi: 10.2514/6.2024-3413. URL https://arc.aiaa.org/doi/abs/10.2514/6.2024-3413.DOI
  57. [57]Eduardo Martini, Junoh Jung, André V.G. Cavalieri, Peter Jordan, and Aaron Towne. Resolvent-based tools for optimal estimation and control via the wiener–hopf formalism. Journal of Fluid Mechanics, 937:A19, 2022. doi: 10.1017/jfm.2022.102.DOI
  58. [58]Junoh Jung, Rutvij Bhagwat, and Aaron Towne. Resolvent-based estimation and control of a laminar airfoil wake. Journal of Fluid Mechanics, 1016:A41, 2025. doi: 10.1017/jfm.2025.10423.DOI
  59. [59]Yuhao Zhou, Aaron Towne, Junoh Jung, Rutvij Bhagwat, Eduardo Martini, Peter Jordan, Diego B. Audiffred, Igor Maia, and André V. Cavalieri. Toward resolvent-based estimation and control of wavepackets in supersonic turbulent jets. In AIAA SCITECH 2026 Forum, 2026. doi: 10.2514/6.2026-1873. URL https://arc.aiaa.org/doi/abs/10.2514/6.2026-1873.DOI
  60. [60]Jonathan P Morgan. Linear and Non-linear Interactions in a Rough-Wall Turbulent Boundary Layer. PhD thesis, California Institute of Technology, 2019. URL https://resolver.caltech.edu/CaltechTHESIS:04112019-234812867.DOI
  61. [61]A. Chavarin, G. Gómez-de Segura, R. García-Mayoral, and M. Luhar. Resolvent-based predictions for turbulent flow over anisotropic permeable substrates. Journal of Fluid Mechanics, 913:A24, 2021. doi: 10.1017/jfm.2020.1169.DOI
  62. [62]Azadeh Jafari, Beverley J. McKeon, and Maziar Arjomandi. Frequency-tuned surfaces for passive control of wall-bounded turbulent flow – a resolvent analysis study. Journal of Fluid Mechanics, 959:A26, 2023. doi: 10.1017/jfm.2023.149.DOI
  63. [63]David P Huynh, Yuting Huang, and Beverley J McKeon. Experiments and modeling of a compliant wall response to a turbulent boundary layer with dynamic roughness forcing. Fluids, 6(5):173, April 2021.DOI
  64. [64]Jingzhou Song, Ting Wu, Chutian Wu, Chang Liu, and Guowei He. Structured input–output analysis of compliant wall turbulence. Journal of Fluid Mechanics, 1035:A7, 2026. doi: 10.1017/jfm.2026.11530.DOI
  65. [65]J.-L. Pfister, N. Fabbiane, and O. Marquet. Global stability and resolvent analyses of laminar boundary-layer flow interacting with viscoelastic patches. Journal of Fluid Mechanics, 937:A1, 2022. doi: 10.1017/jfm.2022.72.DOI
  66. [66]P. W. Carpenter, C. Davies, and A. D. Lucey. Hydrodynamics and compliant walls: Does the dolphin have a secret? Current Science, 79(6):758–765, 2000.
  67. [67]Max O. Kramer. Boundary layer control by “artificial dolphin coating”. Naval Engineers Journal, 89(5):41–45, 1977. doi: https://doi.org/10.1111/j.1559-3584.1977.tb04243.x. URL https://onlinelibrary.wiley.com/doi/abs/10.1111/j.1559-3584.1977.tb04243.x.
  68. [68]T. Brooke Benjamin. Effects of a flexible boundary on hydrodynamic stability. Journal of Fluid Mechanics, 9(4):513–532, 1960. doi: 10.1017/S0022112060001286.DOI
  69. [69]P. W. Carpenter and A. D. Garrad. The hydrodynamic stability of flow over kramer-type compliant surfaces. part 1. tollmien-schlichting instabilities. Journal of Fluid Mechanics, 155:465–510, 1985. doi: 10.1017/S0022112085001902.DOI
  70. [70]P. W. Carpenter and A. D. Garrad. The hydrodynamic stability of flow over kramer-type compliant surfaces. part 2. flow-induced surface instabilities. Journal of Fluid Mechanics, 170:199–232, 1986. doi: 10.1017/S002211208600085X.DOI
  71. [71]P Huerre and P A Monkewitz. Local and global instabilities in spatially developing flows. Annual Review of Fluid Mechanics, 22:473–537, 1990. ISSN 1545-1479. doi: https://doi.org/10.1146/annurev.fl.22.010190.002353. URL https://www.annualreviews.org/content/journals/10.1146/annurev.fl.22.010190.002353.
  72. [72]Rashad Moarref and Mihailo R. Jovanovic. Model-based design of transverse wall oscillations for turbulent drag reduction. Journal of Fluid Mechanics, 707:205–240, 2012. doi: 10.1017/jfm.2012.272.DOI
  73. [73]Wei Ran, Armin Zare, and Mihailo R. Jovanovic. Model-based design of riblets for turbulent drag reduction. Journal of Fluid Mechanics, 906:A7, 2021. doi: 10.1017/jfm.2020.722.DOI
  74. [74]Juan C. del Álamo and Javier Jiménez. Spectra of the very large anisotropic scales in turbulent channels. Physics of Fluids, 15(6):L41–L44, 06 2003. ISSN 1070-6631. doi: 10.1063/1.1570830. URL https://doi.org/10.1063/1.1570830.
  75. [75]Juan C. del Álamo, Javier Jiménez, Paulo Zandonade, and Robert D. Moser. Scaling of the energy spectra of turbulent channels. Journal of Fluid Mechanics, 500:135–144, 2004. doi: 10.1017/S002211200300733X.DOI
  76. [76]Sergio Hoyas and Javier Jiménez. Scaling of the velocity fluctuations in turbulent channels up to Reτ=2003. Physics of Fluids, 18(1):011702, 01 2006.DOI
  77. [77]Sergio Hoyas and Javier Jiménez. Reynolds number effects on the reynolds-stress budgets in turbulent channels. Physics of Fluids, 20(10):101511, 10 2008. ISSN 1070-6631. doi: 10.1063/1.3005862. URL https://doi.org/10.1063/1.3005862.
  78. [78]B. J. McKeon. The engine behind (wall) turbulence: perspectives on scale interactions. Journal of Fluid Mechanics, 817:P1, 2017. doi: 10.1017/jfm.2017.115.DOI
  79. [79]João Manuel de Oliveira Barbosa and Eduardo Kausel. The thin-layer method in a cross-anisotropic 3d space. International Journal for Numerical Methods in Engineering, 89(5):537–560, 2012. doi: https://doi.org/10.1002/nme.3246.
  80. [80]Peter J. Schmid and Luca Brandt. Analysis of Fluid Systems: Stability, Receptivity, Sensitivity: Lecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013. Applied Mechanics Reviews, 66(2):024803, 03 2014. ISSN 0003-6900. doi: 10.1115/1.4026375.
  81. [81]Rashad Moarref, Ati S. Sharma, Joel A. Tropp, and Beverley J. McKeon. Model-based scaling of the streamwise energy density in high-reynolds-number turbulent channels. Journal of Fluid Mechanics, 734:275–316, 2013. doi: 10.1017/jfm.2013.457.DOI
  82. [82]S. J. Kline, W. C. Reynolds, F. A. Schraub, and P. W. Runstadler. The structure of turbulent boundary layers. Journal of Fluid Mechanics, 30(4):741–773, 1967. doi: 10.1017/S0022112067001740.DOI
  83. [83]Kilian Lapanderie, Ankit Srivastava, and Scott Dawson. Spectra and pseudospectra of mean-linearized turbulent flow over dynamic surfaces. In APS Division of Fluid Dynamics Meeting Abstracts, 2024.
  84. [84]Cleve B Moler and Gilbert W Stewart. An algorithm for generalized matrix eigenvalue problems. SIAM Journal on Numerical Analysis, 10(2):241–256, 1973.DOI
  85. [85]M. Lisa Manning, B. Bamieh, and J. M. Carlson. Descriptor approach for eliminating spurious eigenvalues in hydrodynamic equations, 2008. URL https://arxiv.org/abs/0705.1542.
  86. [86]Clayton A. Young, MeiLi O’Bannon, and Scott L. Thomson. Three-dimensional printing of ultrasoft silicone with a functional stiffness gradient. 3D Printing and Additive Manufacturing, 11(2):435–445, 2024. doi: 10.1089/3dp.2022.0218. URL https://doi.org/10.1089/3dp.2022.0218.
  87. [87]Pierluigi Morra, Onofrio Semeraro, Dan S. Henningson, and Carlo Cossu. On the relevance of reynolds stresses in resolvent analyses of turbulent wall-bounded flows. Journal of Fluid Mechanics, 867:969–984, 2019. doi: 10.1017/jfm.2019.196.DOI
  88. [88]Pierluigi Morra, Petrônio A. S. Nogueira, André V. G. Cavalieri, and Dan S. Henningson. The colour of forcing statistics in resolvent analyses of turbulent channel flows. Journal of Fluid Mechanics, 907:A24, 2021. doi: 10.1017/jfm.2020.802.DOI
  89. [89]Ethan Pickering, Georgios Rigas, Oliver T. Schmidt, Denis Sipp, and Tim Colonius. Optimal eddy viscosity for resolvent-based models of coherent structures in turbulent jets. Journal of Fluid Mechanics, 917:A29, 2021. doi: 10.1017/jfm.2021.232.DOI
  90. [90]Stephen B. Pope. Turbulent Flows. Cambridge University Press, 2000.DOI
  91. [91]W.P Jones and B.E Launder. The prediction of laminarization with a two-equation model of turbulence. International Journal of Heat and Mass Transfer, 15(2):301–314, 1972. ISSN 0017-9310. doi: https://doi.org/10.1016/0017-9310(72)90076-2. URL https://www.sciencedirect.com/science/article/pii/0017931072900762.
  92. [92]Armin Zare, Mihailo R. Jovanović, and Tryphon T. Georgiou. Colour of turbulence. Journal of Fluid Mechanics, 812:636–680, 2017. doi: 10.1017/jfm.2016.682.DOI
  93. [93]Mohammadamin Naseri and Armin Zare. Turbulence modeling over riblets via domain transformation, 2025. URL https://arxiv.org/abs/2501.03542.
  94. [94]W. C. Reynolds and W. G. Tiederman. Stability of turbulent channel flow, with application to Malkus’s theory. Journal of Fluid Mechanics, 27(2):253–272, 1967. doi: 10.1017/S0022112067000308.DOI

Paper details

vlnc:W_eka242vz
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

artificial intelligence tools

View statement
Looking for related papers…
Contents