betaFeedback

WorksPhysics and Astronomy

Information Thermodynamics in Closed Quantum Many-Body Dynamics

Abstract

Although information thermodynamics explains how the second law is modified due to the information acquired by Maxwell's demon, its formulation in many-body systems remains largely open. Here, we develop an information-thermodynamic framework for closed quantum many-body systems initially in microscopic thermal equilibrium (MITE), under physically motivated restrictions: local quantum measurements and finite-time controls generated by local Hamiltonians. By additionally assuming that each local feedback term depends only on nearby measurement outcomes, we rigorously prove that the extractable work coincides in the thermodynamic limit with that extractable from the corresponding canonical ensemble. We further express this extractable work in terms of quantum-information quantities, including the quantum-classical mutual information and the Holevo information for the corresponding canonical ensemble. We also show that feedback based on distant measurement outcomes can exploit long-range correlations hidden in MITE, yielding an extensive increase in extracted work relative to the canonical ensemble.

Introduction

Introduction.— Maxwell’s demon is a thought experiment in which feedback control based on measurement outcomes appears to violate the second law of thermodynamics [1, 2, 3, 4]. In modern information thermodynamics, the paradox is resolved by incorporating the information acquired through measurement and the cost of erasing memory [5, 6, 7, 8], and the last decades have witnessed remarkable success in this field especially for few-body systems amenable to precise control [9, 10, 11, 12, 13, 14, 15]. However, despite recent progress [16, 17], many questions remain as to how information thermodynamics should be formulated in many-body systems, the demon’s original setting. Such questions have especially regained importance in light of recent experimental advances in quantum computers and quantum simulators, which have made measurement-based feedback control of otherwise unitary many-body dynamics feasible [18, 19, 20, 21]. It is therefore important to explore how information thermodynamics extends to closed quantum many-body systems.

In parallel, the extractable work in closed quantum dynamics (without measurement and feedback) has recently been studied extensively as a fundamental problem in quantum thermodynamics and quantum-battery research [12, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38]. The maximum work extractable under arbitrary unitary operations is called ergotropy [22], and a state whose energy expectation value cannot be lowered by any unitary operation is called a passive state [39, 40]. This property is an (idealized) formulation of Planck’s principle, which provides one way to characterize quantum thermal equilibrium. The canonical ensemble ρens=e−βH/Z\rho^{\mathrm{ens}} = e^{-\beta H}/Z with β≥0\beta\ge0 is passive, and no work can be extracted from it by unitary operations alone.

In a closed quantum many-body system, however, not only a canonical ensemble but also pure states can represent thermal equilibrium with respect to local observables. One of such classes of states is microscopic thermal equilibrium (MITE), where the expectation value of every local observable agrees with that in the corresponding canonical ensemble [41]. Importantly, such thermal equilibrium with respect to local observables does not immediately imply passivity in the conventional sense. Indeed, if arbitrary unitary operations are allowed, we can transform the initial thermal pure state to the ground state, which leads to extensive erg otropy [22]. In realistic quantum many-body systems, however, arbitrary global unitaries cannot be implemented freely. It has recently been shown that no extensive work can be extracted from finite-time operations under local Hamiltonians, i.e., recovering the second law of thermodynamics for thermal pure states [33, 42].

Against this background, one crucial question is how the second law on work extraction can be modified under realistic (e.g., local) measurement and feedback operations in closed quantum many-body systems. We note that related notions, such as daemonic ergotropy, characterize the enhancement of ergotropy by measurement and feedback [43]. However, it remains unclear how such measurement-assisted work extraction should be formulated thermodynamically in closed many-body systems (using, e.g., temperature), especially for thermal pure states under locality constraints.

In this Letter, we develop an information-thermodynamic framework for closed quantum many-body systems initially in MITE under experimentally and physically motivated restrictions: local quantum measurements and finite-time unitary controls generated by local Hamiltonians. When we additionally assume each local term in the feedback Hamiltonian to depend only on measurement outcomes obtained in nearby regions, we rigorously prove that the work extractable from MITE (a pure state) coincides in the thermodynamic limit with that extractable from the canonical ensemble (a mixed state). The latter is expressed in terms of the QC mutual information [5, 44, 45, 46], the Holevo information [47, 48, 49], and non-equilibrium free energy. Thus, even when the entire system is in a pure state from which macroscopic work could be extracted under unrestricted operations, the work extractable under these constraints is bounded in terms of measurement-related information quantities. In contrast, if we allow feedback based on distant measurement outcomes, we show that long-range correlations hidden in a pure MITE state can be exploited for work extraction exceeding that from the canonical ensemble despite finite-time quantum operations. Importantly, our results are relevant to quantum simulators and quantum computers, where pure many-body states are naturally prepared whereas preparing an exact canonical ensemble is generally challenging.

Measurement-and-feedback protocol in closed many-body systems.— We consider the work extractable by measurement and feedback control applied to a closed quantum many-body system of volume V=LdV = L^d. Here, a closed quantum many-body system exchanges no heat with a heat bath but is subject to external operations consisting of measurement and feedback. We focus on a cyclic protocol, and take the initial and final Hamiltonians to be Hi=Hf=H=∑XhXH_i = H_f = H = \sum_X h_X, where hXh_X is a local operator supported on a subregion XX, whose diameter diam⁡(X)\operatorname{diam}(X) does not depend on the system size LL. Here, we define the diameter of the region XX by diam⁡(X):=max⁡{dist⁡(x,y):x,y∈X}\operatorname{diam}(X) := \max\{\operatorname{dist}(x,y) : x,y \in X\}, where dist⁡(x,y)\operatorname{dist}(x,y) is the Euclidean distance.

We consider a protocol similar to that in [5], where the measurement and feedback are applied only once. It consists of three steps. First, a unitary operation U1U_1 is applied before the measurement. Next, a measurement described by Kraus operators {Mk}\{M_k\} is performed, where kk is a set of measurement outcomes and {Mk}\{M_k\} satisfies ∑kMk†Mk=1\sum_k M_k^\dagger M_k = 1. Finally, conditioned on kk, a feedback unitary UkU_k is applied. For an initial state ρi\rho_i, the probability of obtaining outcome kk and the postfeedback state conditioned on outcome kk are Pk=Tr⁡[MkU1ρiU1†Mk†]P_k = \operatorname{Tr}\left[M_k U_1 \rho_i U_1^\dagger M_k^\dagger\right] and ρk′=UkMkU1ρiU1†Mk†Uk†/Pk\rho'_k = U_k M_k U_1 \rho_i U_1^\dagger M_k^\dagger U_k^\dagger/P_k, respectively. Averaging over the outcomes {k}\{k\} gives the final state ρf=∑kPkρk′=∑kUkMkU1ρiU1†Mk†Uk†\rho_f = \sum_k P_k \rho'_k = \sum_k U_k M_k U_1 \rho_i U_1^\dagger M_k^\dagger U_k^\dagger.

Because the closed quantum many-body system exchanges no heat with a heat bath, we define the extracted work as the net decrease in the system’s energy induced by the sequence of external operations [5]:

W=Tr⁡[Hρi]−Tr⁡[Hρf].(1)W = \operatorname{Tr}[H\rho_i] - \operatorname{Tr}[H\rho_f]. \tag*{(1)}

Although a physical implementation of the measurement may exchange energy with the system, the resulting change in the system energy is reflected in ρf\rho_f; the energetic costs associated with the measurement apparatus and feedback controller, including information processing and memory reset, are not included in WW [5, 8]. A positive value W>0W > 0 means that energy has been extracted from the system.

Our main assumption is that U1U_1 and UkU_k are generated by local Hamiltonians in an LL-independent time and that {Mk}\{M_k\} describes local measurement as specified below. If we first assume additionally that each local term in the feedback Hamiltonian depends only on measurement outcomes obtained within an LL-independent distance of its support, we obtain our main theorem: the work WW extractable from general initial MITE is given by

βW≃βWens=IQC−χ−D(ρfens∥ρiens).(2)\beta W \simeq\beta W_{\mathrm{ens}} = I_{\mathrm{QC}} - \chi- D\left(\rho_f^{\mathrm{ens}} \middle\| \rho_i^{\mathrm{ens}}\right). \tag*{(2)}

Here, WensW_{\mathrm{ens}} denotes the work extracted by applying the same protocol to the initial canonical ensemble ρiens=e−βH/Z\rho_i^{\mathrm{ens}} = e^{-\beta H}/Z, producing the final (generally nonequilibrium) state ρfens\rho_f^{\mathrm{ens}}. The symbol ≃\simeq means that subsequent corrections are neglected for large LL, and the right-hand side consists of information-theoretical quantities defined for this protocol with the canonical initial state. In the following, we detail the definition of each quantity, the conditions for the equality, and their meanings.

Work extraction from MITE under constraints on locality and operational times.— We first discuss the first equality in Eq. (2), which serves as a main achievement in our work. A microscopic thermal equilibrium (MITE) ρiMITE\rho_i^{\mathrm{MITE}} [41] with inverse temperature β\beta is defined as a (possibly pure) state where expectation values of local observables OO are indistinguishable from those of the canonical ensemble ρiens\rho_i^{\mathrm{ens}} with the same β\beta:

Tr⁡[ρiMITEO]≃Tr⁡[ρiensO].(3)\operatorname{Tr}[\rho_i^{\mathrm{MITE}} O] \simeq\operatorname{Tr}[\rho_i^{\mathrm{ens}} O]. \tag*{(3)}

Here, A≃BA \simeq B means ∣A−B∣=o(1)|A-B| = o(1) and o(V)o(V) for intensive and extensive AA, respectively. To keep the discussion general, we consider an extended notion of MITE and assume that the local observable OO has support SlocS_{\mathrm{loc}} whose radius scales sublinearly with the system size LL: diam⁡[Sloc]=O(Ls)\operatorname{diam}[S_{\mathrm{loc}}] = O(L^s). Note that s=0s = 0 corresponds to the ordinary MITE [41], but the MITE with 0<s<10 < s < 1 can also occur for typical states randomly taken from the microcanonical ensemble [50, 51]. As shown below, our results hold for each fixed ss (0<s<10 < s < 1).

Next, we write the unitary operation applied before the measurement as U1(t′):=Texp⁡[−i∫0t′H1(u) du]U_1(t') := \mathcal{T} \exp\left[-i\int_0^{t'} H_1(u)\,\mathrm{d}u\right] and the feedback operation applied after the measurement as Uk(t):=Texp⁡[−i∫0tHk(u) du]U_k(t) := \mathcal{T} \exp\left[-i\int_0^t H_k(u)\,\mathrm{d}u\right], where T\mathcal{T} denotes the time ordering. Crucially, we assume that the Hamiltonians H1(u)H_1(u) and Hk(u)H_k(u) are given by the sum of local operators (whose supports do not increase with LL), and the durations of the two unitary operations satisfy t,t′=O(Ls)t,t' = O(L^s).

We also impose locality on the measurement. Specifically, we represent the measurement operator corresponding to outcome kk by a depth-dMd_{\mathrm{M}} local measurement circuit:

Mk=mkdMdMmkdM−1dM−1⋯mk11,(4)M_k = m^{d_{\mathrm{M}}}_{k_{d_{\mathrm{M}}}}m^{d_{\mathrm{M}}-1}_{k_{d_{\mathrm{M}}-1}}\cdots m^1_{k_1}, \tag*{(4)}
mknn=⨂Y∈Fnmkn,Yn,Y,(5)m^{n}_{k_n} = \bigotimes_{Y\in\mathcal{F}_n}m^{n,Y}_{k_{n,Y}}, \tag*{(5)}

where k=(k1,…,kdM)\boldsymbol{k}=(k_1,\ldots,k_{d_{\mathrm{M}}}) denotes the full record of local measurement outcomes with kn=(kn,Y)Y∈Fnk_n=(k_{n,Y})_{Y\in\mathcal{F}_n} collecting the outcomes in the nnth measurement layer. Here, Fn\mathcal{F}_n denotes a set of mutually disjoint local regions YY, on which mkn,Yn,Ym^{n,Y}_{k_{n,Y}} is supported. We assume that a measurement represented in this form is low-depth and local, i.e., (D−1)dM=O(Ls)(\mathcal{D}-1)d_{\mathrm{M}}=O(L^s), where D=max⁡nmax⁡Y∈Fndiam⁡(Y)+1\mathcal{D}=\max_n\max_{Y\in\mathcal{F}_n}\operatorname{diam}(Y)+1 (see Supplemental Material for details [52]).

We further impose locality on the dependence of the feedback Hamiltonian on measurement outcomes. Physically, this means that the classical communication is spatially local. We write Hk(u)=∑Zhk(Z),Z(u)H_k(u)=\sum_Z h_{k^{(Z)},Z}(u), where each term is supported on ZZ and k(Z)k^{(Z)} collects the measurement outcomes on which that term depends. Our requirement means that k(Z)k^{(Z)} is a set of kn,Yk_{n,Y} satisfying

dist⁡(Z,Y)≤ℓ,ℓ=O(Ls).(6)\operatorname{dist}(Z,Y)\le\ell,\qquad\ell=O(L^s). \tag*{(6)}

Here, dist⁡(Z,Y):=min⁡z∈Z,y∈Ydist⁡(z,y)\operatorname{dist}(Z,Y):=\min_{z\in Z,y\in Y}\operatorname{dist}(z,y).

Under these conditions, apply the same measurement-and-feedback protocol to ρiens\rho_i^{\mathrm{ens}} and ρiMITE\rho_i^{\mathrm{MITE}}. Then we can prove that

W≃Wens(7)W\simeq W_{\mathrm{ens}} \tag*{(7)}

holds for arbitrary β\beta (including β=0\beta=0). The rigorous formulation of the theorem and its proof are given in Supplemental Material [52], where we apply the Lieb-Robinson bound [53, 54, 55] to the Hamiltonian in the Heisenberg picture. We emphasize that extending the unitary-only setting [33, 42] to measurement and feedback is nontrivial, since even a local measurement can induce a nonlocal state update at the level of individual quantum trajectories. Nevertheless, under the above constraints, the extracted work agrees with that obtained from the corresponding canonical ensemble.

Optimized extractable work.— We next consider feedback operations optimized to maximize the extractable work. For fixed U1U_1 and measurement operators {Mk}\{M_k\}, we denote the optimal work extractable from the canonical initial state under arbitrary unitary feedback by WensoptW_{\mathrm{ens}}^{\mathrm{opt}}. By definition, Wens≤WensoptW_{\mathrm{ens}}\le W_{\mathrm{ens}}^{\mathrm{opt}} holds. Equation (7) holds for every protocol satisfying the locality and time constraints stated above, including Eq. (6). Therefore,

W \simeq W_{\mathrm{ens}}\le W_{\mathrm{ens}}^{\mathrm{opt}}.

{#eq:8}

Thus, although MITE may be pure and nonpassive, the work extractable under these constraints does not exceed the optimal work extractable from the corresponding canonical ensemble with the same U1U_1 and measurement operators.

Two remarks are in order. First, this argument requires all of the above constraints. If longer operation times, nonlocal Hamiltonians, or dependence on distant measurement outcomes (i.e., nonlocal classical communication) are allowed, the equivalence in Eq. (7) is no longer guaranteed. As discussed later, we indeed demonstrate the last possibility leads to additional work gain from long-range correlations in an entangled pure MITE state. Second, the equality condition in (8) is achieved for a certain setup, as discussed later.

Information-thermodynamic identity.— We now show the second equality in Eq. (2):

References

  1. [1]J. C. Maxwell, Theory of Heat (Longmans, Green, and Co., London, 1871).
  2. [2]C. H. Bennett, The thermodynamics of computation—a review, Int. J. Theor. Phys. 21, 905 (1982).DOI
  3. [3]L. Szilard, Über die Entropieverminderung in einem thermodynamischen system bei eingriffen intelligenter wesen, Z. Phys. 53, 840 (1929).DOI
  4. [4]R. Landauer, Irreversibility and heat generation in the computing process, IBM J. Res. Dev. 5, 183 (1961).
  5. [5]T. Sagawa and M. Ueda, Second law of thermodynamics with discrete quantum feedback control, Phys. Rev. Lett. 100, 080403 (2008).
  6. [6]T. Sagawa and M. Ueda, Minimal energy cost for thermodynamic information processing: Measurement and information erasure, Phys. Rev. Lett. 102, 250602 (2009).pubmed.ncbi.nlm.nih.gov/19659065
  7. [7]T. Sagawa and M. Ueda, Generalized jarzynski equality under nonequilibrium feedback control, Phys. Rev. Lett. 104, 090602 (2010).pubmed.ncbi.nlm.nih.gov/20366975
  8. [8]T. Sagawa, Second law-like inequalities with quantum relative entropy: An introduction, Lectures on quantum computing, thermodynamics and statistical physics 8, 127 (2012).arxiv.org/abs/1202.0983
  9. [9]S. W. Kim, T. Sagawa, S. De Liberato, and M. Ueda, Quantum szilard engine, Phys. Rev. Lett. 106, 070401 (2011).pubmed.ncbi.nlm.nih.gov/21405504
  10. [10]J. M. R. Parrondo, J. M. Horowitz, and T. Sagawa, Thermodynamics of information, Nature Physics 11, 131 (2015).
  11. [11]C. Elouard, D. Herrera-Martí, B. Huard, and A. Auffèves, Extracting work from quantum measurement Maxwell’s demon engines, Phys. Rev. Lett. 118, 260603 (2017).DOI
  12. [12]G. Manzano, F. Plastina, and R. Zambrini, Optimal work extraction and thermodynamics of quantum measurements and correlations, Phys. Rev. Lett. 121, 120602 (2018).DOI
  13. [13]S. Toyabe, T. Sagawa, M. Ueda, E. Muneyuki, and M. Sano, Experimental demonstration of information-to-energy conversion and validation of the generalized Jarzynski equality, Nature Physics 6, 988 (2010).DOI
  14. [14]J. V. Koski, V. F. Maisi, T. Sagawa, and J. P. Pekola, Experimental observation of the role of mutual information in the nonequilibrium dynamics of a Maxwell demon, Phys. Rev. Lett. 113, 030601 (2014).pubmed.ncbi.nlm.nih.gov/25083623
  15. [15]Y. Masuyama, K. Funo, Y. Murashita, A. Noguchi, S. Kono, Y. Tabuchi, R. Yamazaki, M. Ueda, and Y. Nakamura, Information-to-work conversion by Maxwell’s demon in a superconducting circuit quantum electrodynamical system, Nature Communications 9, 1291 (2018).DOI
  16. [16]T. Yada, N. Yoshioka, and T. Sagawa, Measuring mul- tripartite quantum correlations by thermodynamic work extraction, Phys. Rev. Res. 7, 043307 (2025).
  17. [17]T. Yada, N. Yoshioka, and T. Sagawa, Testing the equivalence to thermal states via extractable work under local operations and classical communication, Phys. Rev. Lett. 137, 080401 (2026).DOI
  18. [18]D. Ristè, M. Dukalski, C. A. Watson, G. de Lange, M. J. Tiggelman, Y. M. Blanter, K. W. Lehnert, R. N. Schouten, and L. DiCarlo, Deterministic entanglement of superconducting qubits by parity measurement and feedback, Nature 502, 350 (2013).DOI
  19. [19]D. Barredo, S. de Léséleuc, V. Lienhard, T. Lahaye, and A. Browaeys, An atom-by-atom assembler of defect-free arbitrary two-dimensional atomic arrays, Science 354, 1021 (2016), https://www.science.org/doi/pdf/10.1126/science.aah3778.pubmed.ncbi.nlm.nih.gov/27811285
  20. [20]M. Endres, H. Bernien, A. Keessling, H. Levine, E. R. Anschuetz, A. Krajcbrink, C. Senko, V. Vuletic, M. Greiner, and M. D. Lukin, Atom-by-atom assembly of defect-free one-dimensional cold atom arrays, Science 354, 1024 (2016), https://www.science.org/doi/pdf/10.1126/science.aah3752.pubmed.ncbi.nlm.nih.gov/27811284
  21. [21]V. Negrevitksy, M. Marinelli, K. K. Mehta, H.-Y. Lo, C. Flühmann, and J. P. Home, Repeated multi-qubit readout and feedback with a mixed-species trapped-ion register, Nature 563, 527 (2018).
  22. [22]A. E. Allahverdyan, R. Balian, and T. M. Nieuwenhuizen, Maximal work extraction from finite quantum systems, Europhys. Lett. 67, 565 (2004).DOI
  23. [23]R. Alicki and M. Fannes, Entanglement boost for extractable work from ensembles of quantum batteries, Phys. Rev. E 87, 042123 (2013).pubmed.ncbi.nlm.nih.gov/23679388
  24. [24]P. Skrzypczyk, A. J. Short, and S. Popescu, Work extraction and thermodynamics for individual quantum systems, Nature Communications 5, 4185 (2014).
  25. [25]F. C. Binder, S. Vinjanampathy, K. Modi, and J. Goold, Quantacell: powerful charging of quantum batteries, New Journal of Physics 17, 075015 (2015).DOI
  26. [26]M. Perarnau-Llobet, K. V. Hovhannisyan, M. Huber, P. Skrzypczyk, N. Brunner, and A. Acín, Extractable work from correlations, Phys. Rev. X 5, 040111 (2015).
  27. [27]F. Campaioli, F. A. Pollock, F. C. Binder, L. Celeri, J. Goold, S. Vinjanampathy, and K. Modi, Enhancing the charging power of quantum batteries, Phys. Rev. Lett. 118, 150601 (2017).DOI
  28. [28]G. M. Andolina, M. Keck, A. Mari, M. Campisi, V. Giovannetti, and M. Polini, Extractable work, the role of correlations, and asymptotic freedom in quantum batteries, Phys. Rev. Lett. 122, 047702 (2019).DOI
  29. [29]G. Francica, F. C. Binder, G. Guarnieri, M. T. Mitchison, J. Goold, and F. Plastina, Quantum coherence and erg entropy, Phys. Rev. Lett. 125, 180603 (2020).
  30. [30]A. Touil, B. Çakmak, and S. Deffner, Ergotropy from quantum and classical correlations, Journal of Physics A: Mathematical and Theoretical 55, 025301 (2021).DOI
  31. [31]Y. Mitsuhashi, K. Kaneko, and T. Sagawa, Characterizing symmetry-protected thermal equilibrium by work extraction, Phys. Rev. X 12, 021013 (2022).DOI
  32. [32]F. Campaioli, S. Gherardini, J. Q. Quach, M. Polini, and G. M. Andolina, Colloquium: Quantum batteries, Rev. Mod. Phys. 96, 031001 (2024).DOI
  33. [33]A. Hokko and M. Ueda, Universal upper bound on ergotropy and no-go theorem by the eigenstate thermalization hypothesis, Phys. Rev. Lett. 134, 010406 (2025).
  34. [34]J. Medina, O. Culhane, F. C. Binder, G. T. Landi, and J. Goold, Anomalous discharging of quantum batteries: The ergotropic mpemba effect, Phys. Rev. Lett. 134, 220402 (2025).
  35. [35]K. George Paulson, H. Terletska, and H. F Fotso, Work extraction from a controlled quantum emitter, Journal of Physics: Photonics 7, 025023 (2025).arxiv.org/abs/2410.23589
  36. [36]S. Sugimoto, T. Sagawa, and R. Hamazaki, Optimal work extraction from finite-time closed quantum dynamics, Phys. Rev. Res. 8, 023321 (2026).DOI
  37. [37]K. Watanabe and R. Takagi, Universal work extraction in quantum thermodynamics, Nature Communications 17, 1857 (2026).DOI
  38. [38]S. Maity and R. Hamazaki, Clifford ergotropy, arXiv preprint arXiv:2605.09878 (2026).arxiv.org/abs/2605.09878
  39. [39]W. Pusz and S. L. Woronowicz, Passive states and KMS states for general quantum systems, Commun. Math. Phys. 58, 273 (1978).DOI
  40. [40]A. Lenard, Thermodynamical proof of the Gibbs formula for elementary quantum systems, J. Stat. Phys. 19, 575 (1978).DOI
  41. [41]S. Goldstein, D. A. Huse, J. L. Lebowitz, and R. Tum ulka, Thermal equilibrium of a macroscopic quantum system in a pure state, Phys. Rev. Lett. 115, 100402 (2015).DOI
  42. [42]Y. Chiba, Y. Yoneta, R. Hamazaki, and A. Shimizu, Second law of thermodynamics in closed quantum many-body systems, PRX Quantum 7, 043023 (2026).
  43. [43]G. Francica, J. Goold, F. Plastina, and M. Paternostro, Daemonic ergotropy: enhanced work extraction from quantum correlations, npj Quantum Information 3, 12 (2017).DOI
  44. [44]H. J. Groenewold, A problem of information gain by quantum measurements, International Journal of Theoretical Physics 4, 327 (1971).DOI
  45. [45]M. Ozawa, On information gain by quantum measurements of continuous observables, Journal of mathematical physics 27, 759 (1986).DOI
  46. [46]F. Buscemi, M. Hayashi, and M. Horodecki, Global information balance in quantum measurements, Phys. Rev. Lett. 100, 210504 (2008).
  47. [47]A. S. Holevo, Bounds for the quantity of information transmitted by a quantum communication channel, Problemy Peredachi Informatsii 9, 3 (1973).
  48. [48]H. P. Yuen and M. Ozawa, Ultimate information carrying limit of quantum systems, Phys. Rev. Lett. 70, 363 (1993).pubmed.ncbi.nlm.nih.gov/10054093
  49. [49]C. A. Fuchs and C. M. Caves, Ensemble-dependent bounds for accessible information in quantum mechanics, Phys. Rev. Lett. 73, 3047 (1994).pubmed.ncbi.nlm.nih.gov/10057274
  50. [50]S. Goldstein, J. L. Lebowitz, R. Tumulka, and N. Zanghì, Canonical typicality, Phys. Rev. Lett. 96, 050403 (2006).
  51. [51]S. Sugimoto, R. Hamazaki, and M. Ueda, Bounds on eigenstate thermalization, arXiv preprint arXiv:2303.10069 (2023).arxiv.org/abs/2303.10069
  52. [52]See the Supplemental Material, in which we discuss a derivation of the MITE-Gibbs equivalence, and the details for the V-qubit system.
  53. [53]E. H. Lieb and D. W. Robinson, The finite group velocity of quantum spin systems, Communications in Mathematical Physics 28, 251 (1972).
  54. [54]S. Bravyi, M. B. Hastings, and F. Verstraete, Lieb-robinson bounds and the generation of correlations and topological quantum order, Phys. Rev. Lett. 97, 050401 (2006).pubmed.ncbi.nlm.nih.gov/17026080
  55. [55]Z. Gong and R. Hamazaki, Bounds in nonequilibrium quantum dynamics, International Journal of Modern Physics B 36, 2230007 (2022).DOI
  56. [56]M. Esposito and C. Van den Broeck, Second law and landauer principle far from equilibrium, Europhysics Letters 95, 40004 (2011).DOI
  57. [57]K. Mochizuki and R. Hamazaki, Measurement-induced spectral transition, Phys. Rev. Lett. 134, 010410 (2025).DOI
  58. [58]N. Beato, P. Patil, and M. Bukov, Toward a theory of phase transitions in quantum control landscapes, Phys. Rev. X 15, 041014 (2025).
  59. [59]J. M. Horowitz and S. Vaikuntanathan, Nonequilibrium detailed fluctuation theorem for repeated discrete feedback, Phys. Rev. E 82, 061120 (2010).DOI
  60. [60]T. Munakata and M. L. Rosinberg, Entropy production and fluctuation theorems for langevin processes under continuous non-markovian feedback control, Phys. Rev. Lett. 112, 180601 (2014).DOI
  61. [61]T. Yada, N. Yoshioka, and T. Sagawa, Quantum fluctuation theorem under quantum jumps with continuous measurement and feedback, Phys. Rev. Lett. 128, 170601 (2022).DOI
  62. [62]T. Barthel and M. Kliesch, Quasilocality and efficient simulation of markovian quantum dynamics, Phys. Rev. Lett. 108, 230504 (2012).pubmed.ncbi.nlm.nih.gov/23003931
  63. [63]M. Kliesch, C. Gogolin, and J. Eisert, Lieb-robinson bounds and the simulation of time-evolution of local observables in lattice systems, in Many-Electron Approaches in Physics, Chemistry and Mathematics: A Multidisciplinary View, edited by V. Bach and L. Delle Site (Springer International Publishing, Cham, 2014) pp. 301–318.DOI

Paper details

vlnc:W_ekudcq6y
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

OpenAI’s ChatGPT (GPT-6)

View statement
Looking for related papers…
Contents