betaFeedback

WorksPhysics and Astronomy

Nonlinear magnetotransport in MoTe2{}_2

Abstract

The shape of the Fermi surface influences many physical phenomena in materials and a growing interest in how the spin-dependent properties are related to the fermiology of crystals has surged. Recently, a novel current-dependent nonlinear magnetoresistance effect, known as bilinear magnetoelectric resistance (BMR), has been shown to be not only sensitive to the spin-texture in spin-polarized non-magnetic materials, but also dependent on the convexity of the Fermi surface in topological semimetals. In this paper, we show that the temperature dependence of the BMR signal strongly depends on the crystal axis of the semimetallic MoTe2{}_2. For the a-axis, the amplitude of the signal remains fairly constant, while for the b-axis it reverses sign at about 100 K. We calculate the BMR efficiencies at 10 K to be χAJ=(100±3)χ^{J}_{A} = (100\pm3) nm2{}^2T−1{}^{-1}A−1{}^{-1} and χBJ=(−364±13)χ^{J}_{B} = (-364\pm13) nm2{}^2T−1{}^{-1}A−1{}^{-1} for the a- and b-axis, respectively, and we find that they are comparable to the efficiencies measured for WTe2{}_2. We use density functional theory calculations to compute the Fermi surfaces of both phases at different energy levels and we observe a change in convexity of the outer-most electron pocket as a function of the Fermi energy. Our results suggest that the BMR signal is mostly dominated by the change in the Fermi surface convexity.

The bilinear magnetoelectric resistance (BMR) effect is a powerful technique to extract important information on the band structure of quantum materials, such as Fermi surface convexity and spin textures [1, 2, 3, 4, 5]. The BMR effect causes a modulation of the material’s resistance depending on the relative angle between applied electric and magnetic fields [6]. This effect is also sometimes referred as the unidirectional magnetoresistance (UMR) [7, 8] or electrical magnetochiral anisotropy [9, 10, 11] and, as the name suggests, it has a linear dependence with both current and magnetic field. The term UMR is also commonly used in literature to address the effect in magnetic materials [12]. To avoid confusion, we will address this effect as BMR from now on. This effect has been used to explore the spin-dependent Fermi surface of systems with different electronic properties [1, 2, 3], and to give information on the shape and topology of the electron and hole pockets of semimetallic systems [4].

Weyl semimetals present an interesting platform to explore new physical phenomena due to their topologically protected states [13]. These states, called Fermi arcs, appear at the surface of materials and connect the conduction and valence band [14]. A lot of work has been done in understanding the influence of the topologically protected states on the transport properties of Weyl semimetals [15, 16, 17, 18, 19, 20, 21], but a complete understanding of the role of bulk bands is still lacking.

The Weyl semimetal candidate MoTe2\mathrm{MoTe}_2 is a van der Waals material showing low crystal symmetry [22, 23, 24] and strong spin-orbit coupling (SOC) [25, 26]. Moreover, it undergoes a crystallographic phase transition as a function of temperature [27]. MoTe2\mathrm{MoTe}_2 crystallizes in the monoclinic 1T′1T' phase at room temperature and transitions to the orthorhombic TdT_d phase below 240 K [27, 28] (Figure 1a). The crystallographic lattice shows a metallic zigzag chain along the bb-axis, leading to a strong resistance anisotropy in the abab-plane for both phases [28]. The phase transition also leads to a change on the crystal symmetry group, from space group P21/mP2_1/m to space group Pmn21Pmn2_1, allowing for additional polaritic phenomena to occur [24, 29, 30]. It is important to note that 1T′1T'-MoTe2\mathrm{MoTe}_2 possesses inversion symmetry, which implies absence of band splitting and thus, a zero net (bulk) spin-texture. This results in a Fermi surface that is fully spin-degenerate. However, a non-zero spin-texture can appear at the surfaces, allowing for a "hidden" spin texture in the 1T′1T' phase [31, 32, 33]. Interestingly, the TdT_d phase is predicted to be a type-II Weyl state with two Weyl nodes close to the Fermi level, while the 1T′1T' phase remains a trivial semimetal [34, 35, 36]. Although a large magnetoresistance has been measured in TdT_d-MoTe2\mathrm{MoTe}_2 [15, 37, 38], the origins of the effect are not yet clear, since theoretical calculations indicate that MoTe2\mathrm{MoTe}_2 is an uncompensated semimetal [39]. Moreover, despite these interesting properties and promising spintronic [24, 40, 41, 42, 43, 44] and topological applications [16, 17, 18, 19, 45, 46], no study of its nonlinear magnetoresistance, i.e. the BMR effect, has been performed so far.

Image not extracted

Figure 1. (a) Crystal structure of semimetallic 1T′1T^\prime and TdT_d crystal phases. (b) Schematics for the bilinear magnetoelectric resistance measurements. (c) Longitudinal resistance as a function of temperature measured with the current along the two main crystal axis of MoTe2MoTe_2. The top inset shows an optical image of the device (scale bar corresponds to 5 μ\mum) and the bottom inset shows the polarized Raman spectra for each axis. BMR measurements with the current applied along the aa- (d) and bb-axis (e) with an in-plane magnetic field of 7 T for two different temperatures (10 K and 210 K). A vertical offset was removed for clarity.

In this work, we report on the BMR effect observed for the two main crystal axis of semimetallic MoTe2\mathrm{MoTe}_2 as a function of temperature. We observe a change in the BMR signal as we cool down from room temperature to 10 K which is strongly anisotropic with respect to the crystal axes (Figure 1). For some of our devices we observe a crystal-phase change as a function of temperature, which apparently is partially correlated to the change in the BMR signal. Despite this crystal phase change, density-functional theory (DFT) calculations show little changes on the overall band structure or band convexity at the Fermi level for both phases. This indicates that the strong dependence of the BMR signal we observe could be attributed to a change on the Fermi surface convexity resulting from a Fermi level shift as a function of temperature, as observed in the sister material TdT_d-WTe2WTe_2 [4].

77 T) and the current direction was varied while measuring the second-harmonic voltage in the longitudinal direction (Figure 1b). The measurements for the transverse direction can be found in the supplementary information [48]. We have measured three different sets of devices with different MoTe2MoTe_2 thicknesses (tt). The change in the BMR signal as a function of temperature is clearly observed in two of our samples, t=6t = 6 nm and 12 nm. Here we report our findings on the sample with t=12t = 12 nm as obtained by atomic force microscopy. More details on the device fabrication and the results for other samples can be found in the supplementary information [48].

Our devices consist of 1T′1T^\prime-MoTe2MoTe_2 encapsulated in hexagonal boron nitride (hBN), fabricated by mechanically exfoliated crystals (HQ Graphene), and stacked on top of each other via a dry van der Waals assembly technique [47]. The hBN/1T′1T^\prime-MoTe2MoTe_2/hBN stack is assembled and placed on a SiO2SiO_2/Si substrate under a nitrogen environment to protect the MoTe2MoTe_2 crystals from degrading. Two perpendicular Hall bars were patterned on the stack, on the same MoTe2MoTe_2 flake, using electron-beam lithography and followed by Ti/Au contact deposition by conventional techniques. The channel of each Hall bar was designed to be aligned with one of the main axis of the crystal. The measurements were performed using conventional harmonic low-frequency (177 Hz) lock-in techniques with current biases below I0=500I_0 = 500 μ\muA in a variable-temperature insert in Helium gas. The in-plane angle (ϕ\phi) between an external magnetic field (up to B=B =

The complete device is shown in the top inset of Figure 1c, outlining each Hall bar with different colors to indicate the alignment of the channel with the aa- (red) and bb-axis (blue). To confirm this alignment we performed polarized Raman spectroscopy measurements [49, 50, 51] (bottom inset of Figure 1c) and further characterized our sample by measuring the longitudinal (first-harmonic) resistance as function of temperature, as shown in Figure 1c. As expected, a clear resistance anisotropy is observed between the two axis, where the low-resistive bb-axis is along the metallic chain. Moreover, a small hysteresis loop appears in the interval between 80–300 K as the sample is cooled down and warmed up again. This behavior has been observed in thin MoTe2MoTe_2 flakes and confirmed to be due to a phase transition from the 1T′1T^\prime to the TdT_d phase. Different than for bulk MoTe2MoTe_2 this phase transition is not abrupt, resulting from a coexistence of the two phases, with the main crystal phase changing between the 1T′1T' and the TdT_d phases with temperature [52, 53].

The BMR effect arises from the interplay between the applied current and magnetic field. Mathematically, we can express the resistance of a material by a resistance term R0R_0, plus a term linear on the current and magnetic field: IR1(B)IR_1(B). For an ac-current I=I0sin⁡(ωt)I=I_0\sin(\omega t) applied through the material, therefore, the longitudinal voltage can be easily written by Ohm’s law, yielding:

V=R0I0sin⁡(ωt)+12R1I02+12R1I02sin⁡(2ωt−π2)(1)V=R_0I_0\sin(\omega t)+\frac{1}{2}R_1I_0^2+\frac{1}{2}R_1I_0^2\sin\left(2\omega t-\frac{\pi}{2}\right) \tag*{(1)}

with the first-harmonic, DC and second-harmonic components of the longitudinal voltage signal being the first, second and third terms on the right, respectively. As can be seen, both DC and Vxx2ωV_{xx}^{2\omega} are proportional to the BMR coefficient R1R_1. Here we focus on the second-harmonic response, which is less prone to additional artifacts.

We observe a remarkably different behavior on the second-harmonic longitudinal resistance (Rxx2ωR_{xx}^{2\omega}) as a function of temperature for the two crystal axes. Here we define Rxx2ω=Vxx2ω(I0)2R_{xx}^{2\omega}=\frac{V_{xx}^{2\omega}}{(I_0)^2}. Figure 1d and Figure 1e show the results for I0I_0 parallel to the aa- and bb-axis, respectively, for a magnetic field of +7+7 T and two different temperatures (10 K and 210 K). Experimental data is represented by the scattered points, while the full lines are the corresponding fits according to:

Rxx2ω=ΔRxx2ωsin⁡[2(ϕ+ϕ0)]+y0,(2)R_{xx}^{2\omega}=\Delta R_{xx}^{2\omega}\sin[2(\phi+\phi_0)]+y_0, \tag*{(2)}

where ΔRxx2ω\Delta R_{xx}^{2\omega} is the amplitude of the signal, and ϕ0\phi_0 and y0y_0 are the angular and vertical offsets, respectively. For both axes we notice that Rxx2ωR_{xx}^{2\omega} shows a sinusoidal behaviour with a periodicity of 2π2\pi. Regions of high and low resistance states can be found at angles of about 90∘90^\circ and 180∘180^\circ. This agrees with a picture of a BMR signal arising from a Rashba-like spin-texture for the Fermi surface of MoTe2_2. Strikingly, the two axes show very different behaviours as the temperature is reduced. For the aa-axis, we observe only a small difference between the amplitudes at 10 K and 210 K, while for the bb-axis the amplitude is not only ∼2.5\sim2.5 times larger at 10 K, but it also changes sign compared to the measurement at 210 K. Further characterization of our signals, showing the magnetic field and current dependence of Rxx2ωR_{xx}^{2\omega} for both aa- and bb-axis can be found in the supplementary information [48].

In order to elucidate the origins of the different behavior for the two crystal axes, we perform similar measurements at various temperatures, inset of Figure 2. Interestingly, ΔRxx2ω\Delta R_{xx}^{2\omega} remains fairly constant for the aa-axis, while

Image not extracted

Figure 2. The efficiency χJ\chi_J for the current applied along the aa- and bb-axis as a function of temperature. The inset shows the amplitude ΔRxx2ω\Delta R_{xx}^{2\omega} of the fittings for the second-harmonic resistance measurements.

for the bb-axis the amplitude goes from positive to negative as the temperature decreases. We note that ΔRxx2ω\Delta R_{xx}^{2\omega} can strongly depend on the specific device geometry and on the temperature dependence of the resistivity. In order to exclude such effects, we calculate the BMR efficiency, defined as:

χJ=2ΔRxx2ωwtR0B,(3)\chi_J=\frac{2\Delta R_{xx}^{2\omega}wt}{R_0B}, \tag*{(3)}

with ww being the channel width. The values for the BMR efficiency as a function of temperature are plotted in Figure 2. We see that χJ\chi_J reaches similar and positive values for both the aa- and bb- axes at high temperatures. Since a spin-dependent BMR signal is not expected at the 1T′1T'-phase, a discussion on the potential causes for the observed BMR signals can be found in the supplementary information [48] (see also reference [54] therein). As the temperature decreases, the BMR efficiency increases modestly for the aa-axis, peaking around 30 K. Differently, χJ\chi_J decreases drastically for the bb-axis, crossing zero at around 100 K. Cooling down further, the BMR efficiency drops rapidly for the bb-axis and at 10 K we obtain a BMR magnitude of twice as large as the one for the aa-axis. The computed values are χJA=(173±3) nm2 T−1 A−1\chi_J^A=(173\pm3)\ \mathrm{nm}^2\ \mathrm{T}^{-1}\ \mathrm{A}^{-1} and χJB=(−364±13) nm2 T−1 A−1\chi_J^B=(-364\pm13)\ \mathrm{nm}^2\ \mathrm{T}^{-1}\ \mathrm{A}^{-1} for the aa- and bb-axes, respectively. These values and temperature behavior are comparable to the ones reported for the sister material WTe2_2 [4]. However, we point out that different from MoTe2_2, WTe2_2 does not undergo a crystal phase transition with a change in temperature. The results for WTe2_2 were explained as a change in the convexity of the electron pockets as a function of the Fermi level [4]. Nonetheless, it is known that BMR can also depend on the spin texture of the Fermi surfaces [1, 2, 3].

To further understand the origins of the behavior we observe, we performed DFT calculations to compute the Fermi contours of the hole and electron bands at different Fermi levels and for both crystal phases. Details of the calculations can be found in the supplementary material [48] (see also references [55, 56, 57, 58, 59, 60, 61, 62] therein). As shown in Figure 3a, the overall electronic dispersion presents some similar features for both 1T′1T' and TdT_d phases. Both show a semimetallic behavior, with electron and hole pockets at the Fermi level. Due to the presence of inversion symmetry in the 1T′1T' phase, we do not see any spin splitting in the DFT calculations. However, the TdT_d lacks inversion symmetry and shows a Rashba-like spin texture, i.e. with the spins perpendicular to the crystal momentum (see supplementary material for the spin-dependent electronic dispersion). For this reason, we rule out that the BMR signal is dominated by a spin-dependent contribution, since the second-harmonic signal reverses sign with temperature which would imply a reversal on the spin direction.

Image not extracted

Figure 3. (a) Electronic dispersion for the 1T′1T' and TdT_d phases, and (b) corresponding Fermi surfaces at different energy cuts in respect to the conduction bands: EF=0 meVE_{\mathrm{F}} = 0\,\mathrm{meV}, 40 meV40\,\mathrm{meV} and 100 meV100\,\mathrm{meV}. For the bands (and corresponding Fermi surfaces) of the 1T′1T' phase, the mixing of two colours represents the spin degenerate bands.

Similar to WTe2\mathrm{WTe}_2, it has been demonstrated that MoTe2\mathrm{MoTe}_2 can show a shift on the Fermi level as a function of temperature [63, 64, 65, 66]. To explore the implications of this to our measurements, we obtain the Fermi-surfaces at different energies (Figure 3) for both phases. The overall behaviour of the electron and hole pockets with the change in energy is similar for both 1T′1T' and TdT_d MoTe2\mathrm{MoTe}_2, however the latter shows two extra hole pockets appearing at low energies. Remarkably, we obtain a change in convexity of the electron pockets for both phases along the Γ−Y\Gamma- Y direction. This change in convexity is consistent with the sign change we observe in our measurements, revealing that our measurements are dominated by a change in the Fermi surface convexity.

Our observations of a BMR signal dominated by the Fermi-surface convexity in MoTe2\mathrm{MoTe}_2 are an important step for the understanding of the band structure of this Weyl semimetal candidate. Here we report an anisotropic behavior of the BMR signal as a function of temperature, with a clear inversion below 100 K100\,\mathrm{K} for the current along the bb-axis while no sign reversal is observed for the current along the aa-axis. This observation is in agreement with a change in the Fermi surface convexity, induced by a change in the Fermi level due to temperature, similar to what has been reported for the sister material WTe2\mathrm{WTe}_2 [4]. We envision that our demonstration of large BMR signals in MoTe2MoTe_2 can be exploited in spintronic devices consisting of MoTe2MoTe_2 interfaced with two-dimensional magnets, for which the magnetic field role could be played by the magnetic exchange. This would allow one to obtain important information on the magnetization direction even on magnetic insulators, while also exploiting the unusual spin torque symmetries [24] provided by MoTe2MoTe_2 for magnetization manipulation.

Data Availability

The raw data and the data underlying the figures in the main text are publicly available through the data repository Zenodo at https://doi.org/10.5281/zenodo.10592551.

Acknowledgements

We thank T. Liu for the valuable knowledge shared on measurements and sample fabrication. We thank J.G. Holstein, H. Adema, H. de Vries, A. Joshua and F.H. van der Velde for their technical support. This work was supported by the Dutch Research Council (NWO) through grants STU.019.014, the Zernike Institute for Advanced Materials, the research program “Materials for the Quantum Age” (QuMat, registrationnumber 024.005.006), which is part of the Gravitation program financed by the Dutch Ministry of Education, Culture and Science (OCW), and the European Union (ERC, 2DOPTOSPIN, 101076932). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. The device fabrication and nanocharacterization were performed using Zernike NanoLabNL facilities.

References

  1. [1]P. He, S. S.-L. Zhang, D. Zhu, Y. Liu, Y. Wang, J. Yu, G. Vignale, and H. Yang, Nature Physics 14, 495 (2018).
  2. [2]P. He, S. M. Walker, S. S.-L. Zhang, F. Y. Bruno, M. S. Bahramy, J. M. Lee, R. Ramaswamy, K. Cai, O. Heinonen, G. Vignale, F. Baumberger, and H. Yang, Physical Review Letters 120, 266802 (2018).
  3. [3]Y. Zhang, V. Kalappattil, C. Liu, M. Mehring, S. S.-L. Zhang, J. Ding, U. Erugu, Z. Chen, J. Tian, K. Liu, J. Tang, and M. Wu, Science Advances 8, eabo0052 (2022).
  4. [4]P. He, C.-H. Hsu, S. Shi, K. Cai, J. Wang, Q. Wang, G. Eda, H. Lin, V. M. Pereira, and H. Yang, Nature Communications 10, 1290 (2019).
  5. [5]T. Liu, A. Roy, J. Hidding, H. Jafari, D. K. De Wal, J. Slawińska, M. H. D. Guimarães, and B. J. van Wees, Physical Review B 108, 165407 (2023).
  6. [6]S. Zhang and G. Vignale, in Spintronics XI (SPIE, San Diego, United States, 2018) p. 40.
  7. [7]T. Guillet, C. Zucchetti, Q. Barbedienne, A. Marty, G. Isella, L. Cagnon, C. Vergnaud, H. Jaffrès, N. Reyren, J.-M. George, A. Fert, and M. Jamet, Physical Review Letters 124, 027201 (2020).
  8. [8]F. Calavalle, M. Suárez-Rodríguez, B. Martín-García, A. Johansson, D. C. Vaz, H. Yang, I. V. Maznichenko, S. Ostanin, A. Mateo-Alonso, A. Chuvilin, I. Mertig, M. Gobbi, F. Casanova, and L. E. Hueso, Nature Materials 21, 526 (2022).
  9. [9]G. L. J. A. Rikken, J. Fölling, and P. Wyder, Physical Review Letters 87, 236602 (2001).
  10. [10]Y. Wang, H. F. Legg, T. Bömerich, J. Park, S. Biesen­kamp, A. A. Taskin, M. Braden, A. Rosch, and Y. Ando, Physical Review Letters 128, 176602 (2022).
  11. [11]T. Yokouchi, Y. Ikeda, T. Morimoto, and Y. Shiomi, Physical Review Letters 130, 136301 (2023).
  12. [12]C. O. Avci, K. Garello, A. Ghosh, M. Gaurbureac, S. F. Alvarado, and P. Gambardella, Nature Physics 11, 570 (2015).
  13. [13]A. A. Burkov, Nature Materials 15, 1145 (2016).
  14. [14]K. Deng, G. Wan, P. Deng, Z. Zhang, S. Ding, E. Wang, M. Yan, H. Huang, H. Zhang, Z. Xu, J. Denglinger, A. Fedorov, H. Yang, W. Duan, H. Yao, Y. Wu, S. Fan, H. Zhang, X. Chen, and S. Zhou, Nature Physics 12, 1105 (2016).
  15. [15]F. C. Chen, H. Y. Lv, X. Luo, W. J. Lu, Q. L. Pei, G. T. Lin, Y. Y. Han, X. B. Zhu, W. H. Song, and Y. P. Sun, Physical Review B 94, 235154 (2016).
  16. [16]X. Qian, J. Liu, L. Fu, and J. Li, Science 346, 1344 (2014).
  17. [17]Y. Zhang, J. van den Brink, C. Felser, and B. Yan, 2D Materials 5, 044001 (2018).
  18. [18]F. C. Chen, X. Luo, J. Yan, Y. Sun, H. Y. Lv, W. J. Lu, C. Y. Xi, P. Tong, Z. G. Sheng, X. B. Zhu, W. H. Song, and Y. P. Sun, Physical Review B 98, 041114 (2018).
  19. [19]Y. Zhang, Y. Sun, and B. Yan, Physical Review B 97, 041101 (2018).
  20. [20]S. Khim, K. Koernpernik, D. V. Efremov, J. Klotz, T. Förster, J. Wosnitza, M. I. Sturza, S. Wurmehl, C. Hess, J. van den Brink, and B. Büchner, Physical Review B 94, 165145 (2016).
  21. [21]G. Sharma, P. Goswami, and S. Tewari, Physical Review B 96, 045112 (2017).
  22. [22]K. Zhang, C. Bao, Q. Gu, X. Ren, H. Zhang, K. Deng, Y. Wu, Y. Li, J. Feng, and S. Zhou, Nature Communications 7, 13552 (2016).
  23. [23]S.-Y. Chen, T. Goldstein, D. Venkataraman, A. Rama-subramaniam, and J. Yan, Nano Letters 16, 5852 (2016).
  24. [24]G. M. Stiehl, R. Li, V. Gupta, I. E. Baggari, S. Jiang, H. Xie, L. F. Kourkoutis, K. F. Mak, J. Shan, R. A. Buhrman, and D. C. Ralph, Physical Review B 100, 184402 (2019).
  25. [25]C. H. Naylor, W. M. Parkin, J. Ping, Z. Gao, Y. R. Zhou, Y. Kim, F. Streller, R. W. Carpick, A. M. Rappe, M. Drndić, J. M. Kikkawa, and A. T. C. Johnson, Nano Letters 16, 4297 (2016).
  26. [26]J. Cui, P. Li, J. Zhou, W.-Y. He, X. Huang, J. Yi, J. Fan, Z. Ji, X. Jing, F. Qu, Z. G. Cheng, C. Yang, L. Lu, K. Suenaga, J. Liu, K. T. Law, J. Lin, Z. Liu, and G. Liu, Nature Communications 10, 2044 (2019).
  27. [27]R. Clarke, E. Marsigliа, and H. P. Hughes, Philosophical Magazine B 38, 121 (1978).
  28. [28]H. P. Hughes and R. H. Friend, Journal of Physics C: Solid State Physics 11, L103 (1978).
  29. [29]A. Roy, M. H. D. Guimarães, and J. Slawińska, Physical Review Materials 6, 045004 (2022).
  30. [30]K. Tenzin, A. Roy, H. Jafari, B. Banas, F. T. Cerasoli, M. Date, A. Jayaraj, M. Buongiorno Nardelli, and J. Slawińska, Physical Review B 107, 165140 (2023).
  31. [31]Q. Liu, X. Zhang, and A. Zunger, Physical Review Letters 114, 087402 (2015).
  32. [32]H. Yuan, M. S. Bahramy, K. Morimoto, S. Wu, K. Nomura, B.-J. Yang, H. Shimotani, R. Suzuki, M. Toh, C. Kloc, X. Xu, R. Arita, N. Nagaosa, and Y. Iwasa, Nature Physics 9, 563 (2013).
  33. [33]J. M. Riley, F. Mazzola, M. Dendzik, M. Michiardi, T. Takayama, L. Bawden, C. Granerød, M. Leandersson, T. Balasubramanian, M. Hoesch, T. K. Kim, H. Takagi, W. Meevasana, Ph. Hofmann, M. S. Bahramy, J. W. Wells, and P. D. C. King, Nature Physics 10, 835 (2014).
  34. [34]Y. Sun, S.-C. Wu, M. N. Ali, C. Felser, and B. Yan, Physical Review B 92, 161107 (2015).
  35. [35]Z. Wang, D. Gresch, A. A. Soluyanov, W. Xie, S. Kushwaha, X. Dai, M. Troyer, R. J. Cava, and B. A. Bernevig, Physical Review Letters 117, 056805 (2016).
  36. [36]J. Jiang, Z. Liu, Y. Sun, H. Yang, C. Rajamathi, Y. Qi, L. Yang, C. Chen, H. Peng, C.-C. Hwang, S. Sun, S.-K. Mo, I. Vobornik, J. Fujii, S. Parkin, C. Felser, B. Yan, and Y. Chen, Nature Communications 8, 19373 (2017).DOI
  37. [37]S. Lee, J. Jang, S.-I. Kim, S.-G. Jung, J. Kim, S. Cho, S. W. Kim, J. Y. Rhee, K.-S. Park, and T. Park, Scientific Reports 8, 19337 (2018).
  38. [38]Q. L. Pei, W. J. Meng, X. Luo, H. Y. Lv, F. C. Chen, W. J. Lu, Y. Y. Han, P. Tong, W. H. Song, Y. B. Hou, Q. Y. Lu, and Y. P. Sun, Physical Review B 96, 075132 (2017).
  39. [39]S. Thirupathaiah, R. Jha, B. Pal, J. S. Matias, P. K. Das, P. K. Sivakumar, I. Vobornik, N. C. Plumb, M. Shi, R. A. Ribeiro, and D. D. Sarma, Physical Review B 95, 241105 (2017).
  40. [40]S. Lim, C. R. Rajamathi, V. Süß, C. Felser, and A. Kapitульnik, Physical Review B 98, 121301 (2018).
  41. [41]C. K. Safeer, N. Ontoso, J. Ingla-Aynés, F. Herling, V. T. Pham, A. Kurzmann, K. Ensslin, A. Chuvilin, I. Robredo, M. G. Vergniory, F. De Juan, L. E. Hueso, M. R. Calvo, and F. Casanova, Nano Letters 19, 8758 (2019).
  42. [42]J. Zhou, J. Qiao, A. Bournel, and W. Zhao, Physical Review B 99, 060408 (2019).
  43. [43]N. Ontoso, C. K. Safeer, F. Herling, J. Ingla-Aynés, H. Yang, Z. Chi, B. Martin-Garcia, I. N. Robredo, M. G. Vergniory, F. de Juan, M. Reyes Calvo, L. E. Hueso, and F. Casanova, Physical Review Applied 19, 014053 (2023).
  44. [44]A. M. Hoque, D. Khokhlov, K. Zollner, B. Zhao, B. Karpiak, J. Fabian, and S. P. Dash, Communications Physics 4, 10.1038/s42005-021-00611-6 (2021).
  45. [45]X. Luo, F. C. Chen, J. L. Zhang, Q. L. Pei, G. T. Lin, W. J. Lu, Y. Y. Han, C. Y. Xi, W. H. Song, and Y. P. Sun, Applied Physics Letters 109, 102601 (2016).
  46. [46]S. Singh, J. Kim, K. M. Rabe, and D. Vanderbilt, Physical Review Letters 125, 046402 (2020).
  47. [47]P. J. Zomer, M. H. D. Guimarães, J. C. Brant, N. Tombros, and B. J. van Wees, Applied Physics Letters 105, 013101 (2014).
  48. [48]See Supplemental Material at [URL-will-be-inserted-by-publisher] for the data of the transverse resistance of the sample showed in the main text; details on the device fabrication and results on other samples; the BMR characterization with magnetic field and current dependence; a discussion on the potential causes for the observed BMR signal at room temperature; and details of the DFT calculations. The Supplemental Material also contains references [4, 22, 23, 47, 49–51, 53].
  49. [49]L. Zhou, S. Huang, Y. Tatsumi, L. Wu, H. Guo, Y.-Q. Bie, K. Ueno, T. Yang, Y. Zhu, J. Kong, R. Saito, and M. Dresselhaus, Journal of the American Chemical Society 139, 8396 (2017).
  50. [50]J. Wang, X. Luo, S. Li, I. Verzhbitsky, W. Zhao, S. Wang, S. Y. Quek, and G. Eda, Advanced Functional Materials 27, 1604799 (2017).
  51. [51]Q. Song, H. Wang, X. Pan, X. Xu, Y. Wang, Y. Li, F. Song, X. Wan, Y. Ye, and L. Dai, Scientific Reports 7, 1758 (2017).
  52. [52]R. He, S. Zhong, H. H. Kim, G. Ye, Z. Ye, L. Winford, D. McHaffie, I. Rilak, F. Chen, X. Luo, Y. Sun, and A. W. Tsen, Physical Review B 97, 041410 (2018).
  53. [53]Y. Cheon, S. Y. Lim, K. Kim, and H. Cheong, ACS Nano 15, 2962 (2021).
  54. [54]R. Beams, L. G. Cançado, S. Krylyuk, I. Kalish, B. Kalanyan, A. K. Singh, K. Choudhary, A. Bruma, P. M. Vora, F. Tavazza, A. V. Davydov, and S. J. Stranick, ACS Nano 10, 9626 (2016).
  55. [55]P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, M. Cococcioni, L. Dabo, et al., Journal of physics: Condensed matter 21, 395502 (2009).
  56. [56]P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. Buongiorno Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, N. Colonna, I. Carnimeo, A. Dal Corso, S. De Gironcoli, P. Delugas, R. A. DiStasio Jr, A. Ferretti, A. Floris, G. Fratesi, G. F. Fugallo, R. Gebauer, U. Gerstmann, F. Giustino, T. Gorni, J. Jia, M. Kawamura, H.-Y. Ko, A. Kokalj, E. Kucuk- benli, M. Lazzeri, M. Marsili, N. Marzari, F. Mauri, N. L. Nguyen, H.-V. Nguyen, A. Otero-de-la Roza, L. Paullatto, S. Poncé, D. Rocca, R. Sabatini, B. Santra, M. Schlipf, A. P. Seit­sonen, A. Smogunov, I. Timrov, T. Thonhauser, P. Umari, N. Vast, X. Wu, and S. Baroni, Journal of Physics: Condensed Matter 29, 465901 (2017).
  57. [57]G. Kresse and J. Furthmüller, Computational Materials Science 6, 15 (1996).
  58. [58]P. E. Blöchl, Physical Review B 50, 17953 (1994).
  59. [59]S. Grimme, J. Antony, S. Ehrlich, and H. Krieg, The Journal of chemical physics 132, 10.1063/1.3382344 (2010).
  60. [60]J. P. Perdew, K. Burke, and M. Ernzerhof, Physical Review Letters 77, 3865 (1996).
  61. [61]M. Buongiorno Nardelli, F. T. Cerasoli, M. Costa, S. Curtarolo, R. D. Gennaro, M. Fornari, L. Liyanage, A. R. Supka, and H. Wang, Computational Materials Science 143, 462 (2018).
  62. [62]F. T. Cerasoli, A. R. Supka, A. Jayaraj, M. Costa, I. Siloi, J. Sławińska, S. Curtarolo, M. Fornari, D. Ceresoli, and M. Buongiorno Nardelli, Computational Materials Science 200, 110828 (2021).
  63. [63]Y. Wu, N. H. Jo, M. Ochi, L. Huang, D. Mou, S. L. Bud’ko, P. C. Canfield, N. Trivedi, R. Arita, and A. Kaminski, Physical Review Letters 115, 166602 (2015).
  64. [64]N. Xu, Z. Wang, A. Magrez, P. Bugnon, H. Berger, C. E. Matt, V. N. Strocov, N. C. Plumb, M. Radovic, E. Pomjakushina, K. Conder, J. H. Dil, J. Mesot, R. Yu, H. Ding, and M. Shi, Physical Review Letters 121, 136401 (2018).
  65. [65]S. Beaulieu, S. Dong, N. Tancogne-Dejean, M. Dendzik, T. Pincelli, J. Maklar, R. P. Xian, M. A. Sentef, M. Wolf, A. Rubio, L. Rettig, and R. Ernstorfer, Science Advances 7, eabd9275 (2021).
  66. [66]D. Kim, J.-H. Lee, K. Kang, D. Won, M. Kwon, S. Cho, Y.-W. Son, and H. Yang, Advanced Electronic Materials 7, 2000823 (2021).

Paper details

vlnc:W_epgne8ng
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents