betaFeedback

WorksPhysics and Astronomy

Orbital parameters for 50 million stars observed by Gaia and spectroscopic surveys

Abstract

Together with ground-based spectroscopic stellar surveys, the Gaia mission has changed Galactic archaeology over the past decade. Nevertheless, attempts to combine these datasets remain scarce, even though precise orbital parameters for as many stars as possible are crucial to unraveling the Galaxy's formation and evolutionary history. This work aims to construct the largest homogeneous catalog of stellar orbital parameters ever compiled to date, using the most up-to-date data from nine large-scale spectroscopic stellar surveys (Gaia RVS DR3, APOGEE DR19, BOSS DR19, LAMOST DR11, Gaia-ESO DR5, GALAH DR4, RAVE DR6, SEGUE DR12, DESI DR1), combined with Gaia DR3 astrometric data and employing an orbital integration tool for orbital modeling. Our catalog includes orbital parameters, such as orbital distances, eccentricity, inclination, energy, angular momentum, and actions, for 52,423,233 stellar sources from Bailer-Jones distances, and 40,355,569 stellar sources from recomputed StarHorse distances, of which 41,100,866 and 30,777,133 are unique objects, respectively. We also included probabilities of belonging to specific Galactic components based on kinematic classification and chemical-abundance classification. Using this catalog, we recover the known kinematic substructures of the Galactic disk while extending their mapping to Galactocentric distances of ∼17\sim17 kpc, demonstrating the potential of the combined dataset for studies of Galactic dynamics and evolution. We expect that this catalog will benefit a broad range of research areas, from stellar astrophysics to Galactic archaeology.

Introduction

In the past decades, stellar astrophysics has entered a transformative era driven by large-scale spectroscopic and astrometric surveys that have expanded our observational capabilities. Projects such as APOGEE (Apache Point Observatory Galactic Evolution Experiment; S. R. Majewski et al. [83]), GALAH (Galactic Archaeology with HERMES; G. M. De Silva et al. 2015), RAVE (RAdial Velocity Experiment; M. Steinmetz et al. [107]), Gaia-ESO (S. Randich et al. [99]), SEGUE (Sloan Extension for Galactic Understanding and Exploration; B. Yanny et al. [127]) and LAMOST (Large Sky Area Multi-Object Fiber Spectroscopic Telescope; X.-Q. Cui et al. [37]) have collected high-quality spectroscopic data for millions of stars across different regions of the Milky Way. In parallel, the Gaia mission (Gaia Collaboration et al. [51]) has revolutionized astrometry by providing precise positions, parallaxes, and proper motions for over a billion stars, and radial velocities for over than 30 million stars.

The Gaia mission was designed to precisely map the three-dimensional positions and proper motions of stars throughout the Milky Way and the Local Group (Gaia Collaboration et al. [51]). Combining astrometry with photometric and spectroscopic capabilities, Gaia addresses fundamental questions across astrophysics, from Solar System dynamics to the cosmic distance scale, while its primary goal remains to understand the formation and evolution of the Milky Way (M. A. C. Perryman et al. [94]; Gaia Collaboration et al. [51]). With a particular focus on the structure, assembly, and dynamical history of the Galaxy, Gaia provides an unprecedented stellar census that is transforming our understanding of the Milky Way (A. G. A. Brown [26]; E. Vasiliev [118]; T. Cantat-Gaudin & L. Casamiquela [30]; A. Bonaca & A. M. Price-Whelan [22]; A. Doliva-Dolinsky et al. [46]; M. Perryman [93]). Together, these surveys enable studies of our Galaxy’s structure, formation, and evolution, marking the advent of big data astronomy in stellar research. The combination of precise kinematic and chemical information has opened new avenues for Galactic archaeology, stellar population studies, and dynamical modeling at scales that were previously inconceivable (A. Helmi [59]; Gaia Collaboration et al. [53]; A. J. Deason & V. Belokurov [41]; J. A. S. Hunt & E. Vasiliev [62]; D. Kawata et al. [65]).

However, most existing studies remain limited either to individual surveys or to relatively small, carefully selected samples, and therefore do not fully exploit the combined statistical power of current datasets. This limitation is primarily driven by the heterogeneous nature of the surveys, which differ in instrumental configurations, spectral resolutions, wavelength coverage, and analysis pipelines, leading to systematic differences in derived quantities such as radial velocities and stellar parameters (e.g., M. Tsantaki et al. [115]; A. Turchi et al. [116]).

While combining astrometric and radial velocities gives access to the six-dimensional phase space of stars, these quantities alone do not fully capture their motion. Orbital parameters, by contrast, describe stellar orbits and encapsulate key dynamical aspects. As a result, deriving orbital parameters from observed phase-space data has become a key step in Galactic studies (e.g., W. H. Trick et al. [114]; J. A. S. Hunt et al. [61]).

In this context, the availability of large samples with homogeneously derived orbital parameters is essential to exploit the current datasets, improving the characterization of known stellar populations, enhancing the detectability of low-contrast structures, and enabling the identification of new dynamical features in the Milky Way, among other applications. Achieving this, however, requires the construction of a large, homogeneous catalog of orbital parameters.

In this work, we address this challenge by combining and homogenizing radial velocities from the latest public data releases of the largest spectroscopic stellar surveys, in order to compute the orbital parameters. The paper is organized as follows: in Section 2, we describe all the observational surveys used in this work. In § 4, we describe the adopted distance estimates and compare the impact of different distance catalogs on the derived orbital parameters. In particular, we apply necessary corrections to systematic biases in our reference dataset, the astrometry and spectroscopy from Gaia’s third data release (DR3; Section 2.1) in § 5, and homogenize the radial velocities of the different surveys in § 6. We then use AGAMA (E. Vasiliev [117]) to compute a homogeneous set of orbital quantities for more than 50 million objects with 6D phase-space information, including orbital distances, eccentricity, inclination, energy, angular momentum, and actions (§ 7). Our final catalog, including our recommendations for selecting high-quality subsamples, is described in § 9. As an illustrative example of the power of our catalog, we performed a probabilistic dynamical classification into broad Galactic components (thin disk, thick disk, and halo) based on the T. Bensby et al. [14] methodology in § 8. Our results are presented in § 10, while our conclusions are shown in § 11.

Surveys

In this section, we briefly describe the surveys used in this work, including their main characteristics and the cross-matching procedure (§ 3.10). A summary of their main properties is presented in Table 1.

SurveyResolutionSpectral range (nm)Survey’s objectsa^{a}Sample Gaia DR3b^{b}Survey’s uniquesc^{c}Sample BJd^{d}Sample SHe^{e}
APOGEE DR1922,5001,510–1,7001,095,4801,076,096964,7101,074,161846,575
BOSS DR192,000365–9501,137,702822,290474,959815,485545,180
DESI DR12,000–5,500360–9826,372,6074,759,6334,535,5974,745,4551,846,897
Gaia RVS DR311,500845–87233,812,18333,652,04933,812,18333,581,72726,660,281
Gaia-ESO DR520,000; 50,000370–900111,348109,868109,866109,33353,993
GALAH DR428,000470–7901,077,8161,062,612909,6181,062,120960,177
LAMOST LRS DR111,800370–9107,896,3097,706,1275,557,4367,689,7176,603,183
LAMOST MRS DR117,500495–6802,575,2682,534,4021,184,0652,533,8302,279,215
RAVE DR67,500841–879518,387444,966444,966444,006400,646
SEGUE DR121,800390–900377,544368,600331,313367,399159,422
Total......54,974,64452,537,64348,324,71052,423,23340,355,569

Table 1. Summary of the surveys and samples used in this work.

Gaia DR3

The current Third Gaia Data Release1 provides astrometry and broad-band photometry for 1.8 billion sources and radial velocities for approximately 33 million stars (Gaia Collaboration et al. [52, 53]). deriving orbital parameters from observed phase-space data has become a key step in Galactic studies (e.g., W. H. Trick et al. [114]; J. A. S. Hunt et al. [61]).

In this context, the availability of large samples with homogeneously derived orbital parameters is essential to exploit the current datasets, improving the characterization of known stellar populations, enhancing the detectability of low-contrast structures, and enabling the identification of new dynamical features in the Milky Way, among other applications. Achieving this, however, requires the construction of a large, homogeneous catalog of orbital parameters.

In this work, we address this challenge by combining and homogenizing radial velocities from the latest public data releases of the largest spectroscopic stellar surveys, in order to compute the orbital parameters. The paper is organized as follows: in Section 2, we describe all the observational surveys used in this work. In § 4, we describe the adopted distance estimates and compare the impact of different distance catalogs on the derived orbital parameters. In particular, we apply necessary corrections to systematic biases in our reference dataset, the astrometry and spectroscopy from Gaia’s third data release (DR3; Section 2.1) in § 5, and homogenize the radial velocities of the different surveys in § 6. We then use AGAMA (E. Vasiliev [117]) to compute a homogeneous set of orbital quantities for more than 50 million objects with 6D phase-space information, including orbital distances, eccentricity, inclination, energy, angular momentum, and actions (§ 7). Our final catalog, including our recommendations for selecting high-quality subsamples, is described in § 9. As an illustrative example of the power of our catalog, we performed a probabilistic dynamical classification into broad Galactic components (thin disk, thick disk, and halo) based on the T. Bensby et al. [14] methodology in § 8. Our results are presented in § 10, while our conclusions are shown in § 11.

Surveys

In this section, we briefly describe the surveys used in this work, including their main characteristics and the cross-matching procedure (§ 3.10). A summary of their main properties is presented in Table 1.

Gaia DR3

The current Third Gaia Data Release1 provides astrometry and broad-band photometry for 1.8 billion sources and radial velocities for approximately 33 million stars (Gaia Collaboration et al. [52, 53]). The astrometric instrument measures positions, parallaxes, and proper motions in the broad optical GG-band (330–1050 nm), achieving microarcsecond-level precision for stars brighter than G∼15G \sim15 mag and extending to G∼21G \sim21 mag for all sources ([77]). Complementing this, the Blue Photometer (BP) and Red Photometer (RP) deliver low-resolution spectrophotometry across 330–680 nm and 640–1050 nm, respectively ([38, 86]). The Radial Velocity Spectrometer (RVS; [36]) acquires medium-resolution (R∼11,000R \sim11{,}000) spectra centered on the Ca II triplet (847–874 nm), currently providing radial velocities for 33 million stars brighter than GRVS∼14G_{\mathrm{RVS}} \sim14 mag ([63]), with typical uncertainties of ∼1.3\sim1.3 km s−1^{-1} at GRVS=12G_{\mathrm{RVS}} = 12, degrading for fainter stars (>6> 6 km s−1^{-1} at GRVS∼14G_{\mathrm{RVS}} \sim14; [63]).

To obtain a unique astrometric reference, we adopt positions and proper motions from Gaia DR3, providing a homogeneous and precise foundation for constructing our orbital parameter catalog. Moreover, since Gaia provides the largest catalog of positions and radial velocities to date, we also use it to scale the measurements from different surveys (see § 6). Our Gaia-based sample comprises 33,652,049 objects with complete positions and radial velocities.

APOGEE DR19

APOGEE is a large-scale near-infrared spectroscopic survey that is part of the Sloan Digital Sky Survey (SDSS; [128]). APOGEE is a multi-object high-resolution spectrograph (R∼22,500R \sim22{,}500) equipped with 300 fibers for simultaneous infrared observations in the HH-band ([124]). The survey operates on the Apache Point Observatory (APO) in the Northern Hemisphere, using the Sloan Foundation 2.5-meter and a 1-meter Telescope to observe bright stars ([56]), and on the 2.5-m Irénée du Pont 2.5-meter Telescope ([25]) at Las Campanas Observatory (LCO) in Chile for Southern Hemisphere observations.

The high spectral resolution of APOGEE enables a typical radial velocity precision of approximately 0.07 km s−1^{-1} for stars with a signal-to-noise ratio (SNR) greater than 20 ([83]), and delivers detailed abundances for up to 20 elements tracing different nucleosynthetic pathways ([54]).

In this paper, we use the most recent APOGEE data from the SDSS Nineteenth Data Release (DR19; [103])2, which is the second release of the fifth phase of the SDSS (SDSS-V; [68]). As with previous releases, DR19 is cumulative and includes all APOGEE observations obtained since 2011. This release contains radial velocities available for 1,095,480 stellar sources. From this release, we select a sample of 1,076,096 objects with astrometry from Gaia.

BOSS DR19

The SDSS-V Milky Way Mapper provides optical spectroscopy obtained with the Baryon Oscillation Spectroscopic Survey (BOSS; [106]) spectrographs, located on the 2.5-m Sloan Telescope at APO and on the 2.5-m du Pont Telescope at LCO. The BOSS spectrographs provide wavelength coverage from approximately 360 to 1000 nm at a spectral resolution of R∼2,000R \sim2{,}000. BOSS can achieve precision of ∼4−5\sim4 - 5 km s−1^{-1} for spectra of low-mass stars with high SNR ([71]).

In this work, we use the public BOSS data release3 included in the SDSS Data Release 19 (DR19; [103]), which presents the first release from the repurposed BOSS spectrograph. From this dataset, we select a sample of 822,290 stars, containing only objects with available radial velocity and Gaia astrometry.

The survey operates from both hemispheres, with APOGEE-N located at Apache Point Observatory in the northern hemisphere using the Sloan Foundation 2.5-meter and a 1-meter Telescope to observe bright stars ([56]), and APOGEE-S situated at Las Campanas Observatory in the southern hemisphere, utilizing the Irénée du Pont 2.5-meter Telescope ([25]).

SEGUE DR12

We also incorporate data from the Sloan Extension for Galactic Understanding and Exploration (SEGUE), which was part of SDSS-II and the first year of SDSS-III ([48]), and consisted of two distinct phases: SEGUE-1 and SEGUE-2 ([127, 101]). SEGUE utilized the SDSS multi-object spectrographs ([106]) mounted on the 2.5-meter Sloan Foundation Telescope at Apache Point Observatory ([56]). The system employed 640 optical fibers per plate, enabling simultaneous observations of hundreds of stars. Both SEGUE phases covered the wavelength range 390–920 nm at R∼1,800R \sim1{,}800, reaching targets as faint as g∼20g \sim20 [127]. This configuration delivers radial velocities with ∼4\sim4–10 km s−1^{-1} precision [127].

For this work, we utilize stellar parameters and radial velocities from the publicly available SEGUE DR12 catalog4. This dataset provides low-resolution spectroscopy and radial velocities for 377,544 stars, with derived parameters obtained through the SEGUE Stellar Parameter Pipeline (SSPP; [74]). After cross-matching with Gaia DR3 astrometry, we obtain a sample of 368,600 objects.

GALAH DR4

The GALAH survey (G. M. De Silva et al. 2015; [84]) employs the High Efficiency and Resolution Multi-Element Spectrograph (HERMES; [105]) installed on the 3.9-meter Anglo-Australian Telescope (AAT) at Siding Spring Observatory. HERMES is a fiber-fed, high-resolution spectrograph (R∼28,000R \sim28{,}000) capable of simultaneously observing 400 stars across four non-contiguous optical bands spanning approximately 471–789 nm ([105]). This configuration enables precise radial velocity measurements (0.23 km s−1^{-1}) and detailed chemical abundances for up to 30 elements ([28]), supporting investigations of stellar populations, chemodynamical processes, and the formation history of the Milky Way.

For this work, we employ stellar parameters and radial velocities from the fourth data release of the GALAH survey (GALAH DR4; [28])5, which provides high-resolution optical spectroscopy and radial velocity for 1,077,816 stars. From this release, we obtain a sample of 1,062,612 objects with Gaia astrometry.

RAVE DR6

The Radial Velocity Experiment (RAVE; [107]) was a medium-resolution spectroscopic survey conducted between 2003 and 2013. RAVE employed the Six-degree Field (6dF) multi-object spectrograph ([122]) mounted on the UK Schmidt Telescope at the Anglo-Australian Observatory. The survey obtained medium-resolution spectra (R∼7,500R \sim7{,}500) centered on the Ca ii triplet region (841–879 nm). This spectral range enables radial velocity measurements and estimates of basic stellar parameters such as temperature, gravity, and metallicity. With a typical SNR of 40, RAVE achieves radial velocity precision better than 2 km s−1^{-1} for most targets (M. Steinmetz et al. 2020, see their Figure 8).

In this study, we use the sixth and final data release of the RAVE survey (RAVE DR6; M. Steinmetz et al. 2020; M. Steinmetz et al. 2020)6, from which we adopt the radial velocity measurements. For these stars, stellar parameters and abundances are taken from the MADERA stellar parameters catalog. We crossmatch this sample of 518,387 stars with available radial velocities with Gaia DR3 astrometry. Our sample comprises 444,966 stars with phase-space information derived from this cross-match.

LAMOST DR11

LAMOST ([37]) is a spectroscopic facility that conducts the large-scale, low- to medium-resolution LAMOST survey. Over the past decade, the survey has collected millions of spectra through two main programs, the LAMOST ExtraGalactic Survey (LEGAS) and the LAMOST Experiment for Galactic Understanding and Exploration (LEGUE; [43]; [129]).

The LAMOST survey, conducted at Xinglong Observatory, employs a 4-meter Schmidt telescope equipped with 4000 fibers distributed across a 5-degree field of view, feeding light into 16 spectrographs connected to 32 CCD cameras ([37]). During its first phase (LAMOST-I, 2012–2017), the survey operated solely in low-resolution mode (R∼1,800R \sim1{,}800), covering a broad optical wavelength range from 370 to 900 nm ([129]). In 2017, all spectrographs were upgraded to also support a medium-resolution mode (R∼7,500R \sim7{,}500), marking the beginning of the second phase (LAMOST-II, 2018–2023). This phase includes both the Low-Resolution Survey (LRS), and the Medium-Resolution Survey (MRS; [78]). The MRS operates with a more limited spectral coverage than the LRS, with the blue and red arms spanning 495–535 nm and 630–680 nm, respectively. Nonetheless, the increased resolution enables a higher radial velocity precision of ∼\sim1 km s−1^{-1} for late-type stars, compared to ∼\sim5 km s−1^{-1} achieved in the low-resolution mode for high SNR spectra ([126]; [121]). While the LRS provides stellar atmospheric parameters and chemical abundances ([79]), the MRS allows the determination of abundances for a similar number of elements but with significantly improved precision, enabling detailed chemical tagging in Galactic studies ([78]).

For this study, we use the LAMOST DR11 public data7, which includes observations from both the LAMOST-I and LAMOST-II phases of the survey. DR11 comprises data from the LRS and the MRS, and contains measurements for 7,896,309 observations with radial velocities from LRS and 2,575,268 stars from MRS. From this dataset, we select a subsample of 7,706,127 LRS and 2,534,402 MRS stars with available astrometry information after cross-matching with Gaia.

Gaia-ESO DR5

The Gaia-ESO Spectroscopic Survey is an extensive project that obtained spectroscopy across major Galactic components, including the halo, thick and thin disks, and the bulge [100, 99]. The Gaia-ESO Survey is carried out with the multi-object spectrograph Fiber Large Array Multi Element Spectrograph (FLAMES; L. Pasquini et al. [91]). It employs both the GIRAFFE spectrograph (A. Blecha et al. [19]), with R∼20,000R \sim20{,}000, and the Ultraviolet and Visual Echelle Spectrograph (UVES; H. Dekker et al. [42]), with R∼47,000R \sim47{,}000–50,00050{,}000 [100, 55]. Together, these instruments cover the spectral range from 370 to 900 nm. The high spectral resolution achieved by both instruments enables radial velocity precisions of 0.25 km s−1^{-1} with GIRAFFE and 0.32 km s−1^{-1} with UVES. In this paper, we use the fifth data release (DR5)8, which includes 111,348 stars with radial velocities, from which we retain 109,868 objects with available Gaia astrometry.

DESI DR1

The Dark Energy Spectroscopic Instrument (DESI; DESI Collaboration et al. [44]) is a spectroscopic survey conducted on the 4-meter Mayall Telescope at Kitt Peak National Observatory and has ten identical spectrographs, each consisting of three arms: blue (BB: 360–580 nm), red (RR: 576–762 nm), and near-infrared (ZZ: 752–982 nm), achieving spectral resolving powers between R∼2,000R \sim2{,}000 and 5,500 depending on wavelength [69, 44]. Despite the low resolution of DESI, according to A. P. Cooper et al. [34], the mean radial velocity error is lower than 1 km s−1^{-1} for most stars.

Stellar data from DESI can be obtained from two different pipelines: the RVS pipeline (RVSpecfit) and the Stellar Parameters (SP; S. E. Koposov et al. [69]). In this work, we use the SP pipeline, which employs the FERRE code9 to derive stellar parameters and chemical abundances, including C, Mg, Ca, and Fe.

Here, we use the first Data Release (DR1)10, which covers the first 13 months of the DESI main survey. The stellar component of DR1, available from the Milky Way Survey (A. P. Cooper et al. [34]), includes a value-added catalog, the MWS VAC, which presents calibrated radial velocities and atmospheric parameters. The sample of 6,372,607 stars in DESI DR1 yields 4,924,259 objects with Gaia astrometry after cross-matching.

Catalog Crossmatch

To assign proper motions for the stars in our sample, we cross-match all datasets with Gaia DR3 using the TOPCAT (M. B. Taylor [112]) cross-match tool, with a search radius of 3 arcsec. We double-check our cross-match using the Gaia Source Identifier provided in the spectroscopic survey when available.

For a few objects, we found mismatches. In these cases, for those surveys that provide a Gaia identifier (ID), the correct match was performed directly using its source_id through the Gaia ESA Archive11. Some surveys, such as Gaia-ESO, RAVE, and SEGUE, do not provide a Gaia ID, so we obtain the correct match using the internal cross-match provided for the Gaia ESA Archive. For BOSS and DESI, the Gaia ID is taken from the second data release, which may not match DR3. For those, we use the gaiadr3.dr2_neighbourhood in the Gaia ESA Archive to obtain the DR3 ID, and then obtain the corrected match. The same approach is applied in § 4 to obtain the distances from C. A. L. Bailer-Jones et al. [10].

Distances

To determine precise orbital parameters, precise distances are as essential as the kinematic input parameters. With the proper motions from Gaia DR3 and the precise radial velocities (≃3\simeq3 km s−1^{-1}) from spectroscopic surveys for the majority of stars, the limited distance precision is often the major contributor to the uncertainty of orbital parameters [35]. For stars with precise Gaia DR3 parallaxes (e.g., ϖ/σϖ≳5\varpi/\sigma_{\varpi} \gtrsim5), the distances are very well constrained by astrometry alone (and σϖ/ϖ≃σd/d\sigma_{\varpi}/\varpi\simeq\sigma_d/d; see X. Luri et al. [80]). These are mostly stars located within a 3 kpc sphere around the Sun. For stars with lower signal-to-noise parallax measurements, more sophisticated methods have to be used to compute distances (M. Weiler

2025), and the inclusion of spectro-photometric information often greatly improves the distance precision and accuracy (e.g., A. B. A. Queiroz et al. [96]).

After cross-matching the spectroscopic surveys with Gaia astrometry, we performed a second cross-match with two independent distance catalogs. We include distances from both catalogs in the final release, allowing users to select the catalog that best suits their scientific application. First, we cross-matched our sample with the photo-geometric distance catalog based on Gaia Early Data Release 3 (EDR3; Gaia Collaboration et al. [52]) provided by C. A. L. Bailer-Jones et al. [10], in order to provide homogeneous distance estimates for as many stars in our catalog as possible. The Bailer-Jones (BJ) catalog provides geometric (parallax) distances for 1.47 billion stars and photo-geometric distances for more than 1.35 billion. The photo-geometric distances incorporate Gaia photometry (G and GBP−GRPG_{BP} - G_{RP}) to better constrain distances, particularly for stars with uncertain parallaxes.

Nevertheless, we caution users that the C. A. L. Bailer-Jones et al. [10] distances have been shown to be significantly biased by the distance prior in the low-signal-to-noise regime parallaxes (ϖ/σϖ≲3\varpi/\sigma_{\varpi} \lesssim3). This is due to two widespread conceptual errors in the Bayesian parallax inversion framework, as reported in § 6 of M. Weiler [123].

We therefore also use distances calculated with the latest version of the StarHorse (SH) code (e.g. A. B. A. Queiroz et al. [95]; F. Anders et al. [4]) which incorporates the corrections identified by M. Weiler [123].

The new StarHorse distances for Gaia DR3 (Khalatyan et al., in prep.) supersede the Gaia EDR3 results presented in F. Anders et al. [4] —they use the stellar parameters from A. Khalatyan et al. [66] for stars with DR3 XP spectra (F. De Angeli et al. [38]).

For convenience, throughout the remainder of this paper, results based on the StarHorse and C. A. L. Bailer-Jones et al. [10] distance estimates are denoted as SH and BJ, respectively. All figures, tables, and analyses explicitly indicate which distance set is adopted. We perform a comparison between the orbital parameters derived from the SH and BJ distances in Appendix § 14 to illustrate the impact of the different distance estimates on the computed orbital parameters.

Systematic Corrections in Gaia Data

For determining orbital parameters, we adopt Gaia as the reference source for radial velocities, as it provides a much larger and more homogeneous sample than any other survey in our dataset, offering full-sky coverage and enabling a significantly higher cross-match fraction across all surveys. Nevertheless, systematic effects remain, and corrections to the proper motions and radial velocities, along with their associated uncertainties, are required. These corrections are described in detail below.

We correct the radial velocities following Equation 5 of D. Katz et al. [63] for stars with Teff<8,500T_{\mathrm{eff}} < 8,500 K and Equation (1) of R. Blomme et al. [20] for stars with Teff≥8,500T_{\mathrm{eff}} \geq8,500 K, who identified and quantified systematic offsets in the Gaia DR3 radial velocity scale. In addition, we apply the correction proposed by C. Babusiaux et al. [9] (see their Equation 1), which introduces a scaling factor to the reported radial velocity uncertainties.

In order to do the corrections described in this Section, we needed the GRVSG_{\mathrm{RVS}} magnitude. We note that 1,579,996 stars in Gaia RVS do not have a measured GRVSG_{\mathrm{RVS}} magnitude. For those objects, we adopt the correction from D. Katz et al. [63] using the broad-band G magnitude as a proxy. Although the G and GRVSG_{\mathrm{RVS}} magnitudes are generally similar, with a mean absolute deviation (MAD) of 0.264 mag and a median of 1.024 mag, they are not identical and can differ by up to 2 mag in extreme cases (see Figure 1, left panel). When applying Equation 5 of D. Katz et al. [63] with a difference of 2 mag in G, we find that the resulting variation in radial velocity corrections can reach up to 0.5 km s−1^{-1} (see Figure 1, right panel). To account for the additional uncertainty introduced by using G as a proxy, we compute the correction assuming G±2G \pm2 mag. We add the corresponding difference as an extra systematic uncertainty to the radial velocity errors for those sources without available GRVSG_{\mathrm{RVS}} magnitudes (Eq. (1), where fmagf_{\mathrm{mag}} is our fit, and fσf_{\sigma} is from eq. 1 of C. Babusiaux et al. [9]).

Comparison between GRVS and G magnitude and relation between G magnitude and radial-velocity differences

Figure 1. Left panel: Comparison between GRVSG_{\mathrm{RVS}} and G magnitude, both from Gaia, color-coded by the number of stars. The magenta dashed line indicates the MAD. Right panel: Relation between the G magnitude and the difference in radial velocities obtained using the GRVS + 2 and GRVS corrections for the full Gaia DR3 RVS sample. The black dashed line indicates the best fit for the data, which is fmag=0f_{\mathrm{mag}} = 0 for the straight part, and fmag=−0.096314Gmag+0.937386f_{\mathrm{mag}} = -0.096314 G_{\mathrm{mag}} + 0.937386 for the inclined part.

eRV_corr=eRV+σ,(1)e_{\mathrm{RV\_corr}} = e_{\mathrm{RV}} + \sigma, \tag*{(1)}
σ=fσ2+fmag2.(2)\sigma= \sqrt{f_{\sigma}^{2} + f_{\mathrm{mag}}^{2}}. \tag*{(2)}

If the used magnitude was the GRVSG_{\mathrm{RVS}} magnitude, fmag=0f_{\mathrm{mag}} = 0, and σ\sigma is reduced to the C. Babusiaux et al. [9] correction. The catalog has a dedicated flag, G magnitude, which indicates whether a GRVSG_{\mathrm{RVS}} magnitude is available (G_RVS) or not (G). A small number of stars (∼900\sim900) do not have either GRVSG_{\mathrm{RVS}} or G magnitude, so they were removed from the sample.

In addition to the radial velocity adjustments, we also implement the proper motion corrections proposed by T. Cantat-Gaudin & T. D. Brandt [29]. To assess

the impact of these corrections on the derived orbital parameters, we randomly select a sample of approximately 1,000,000 Gaia stars with G<13G < 13, apply the proper motion corrections, and recompute the corresponding orbital parameters. A comparison of orbital parameters obtained with and without proper-motion corrections shows that the differences are consistently lower than 0.61% for the velocities, eccentricity, and actions, demonstrating that the corrections have a negligible effect on the orbital solutions.

Systematic Offsets and Homogenization of Radial Velocities

As a previous step, we first calibrate the radial velocities of each catalog to the Gaia DR3 reference frame, ensuring consistency across datasets. To derive the radial velocity offsets, we construct a calibration subsample by applying the quality criteria specific to each survey, as detailed below. These quality cuts are used solely to determine the radial velocity offsets and are not applied to the final catalog, which retains all sources.

We use the condition RUWE <1.4< 1.4 to select sources with reliable astrometric measurements (Gaia Collaboration et al. [53]). We restrict the effective temperature to the range 3,500–6,500 K to retain unevolved stars and avoid low-quality solutions associated with very cool or very hot stars.

For each survey (APOGEE, BOSS, DESI, GaiaGaia-ESO, GALAH, LAMOST LRS, LAMOST MRS, RAVE, and SEGUE), we adopted the radial velocity measurements provided by the original catalogs, using the survey-specific columns (v_rad, XCSAO_RV, RV_ADOP, VRAD, rv_comp_1, rv, rv_br1, HRV, and RV_ADOP, respectively). For LAMOST MRS, which provides multiple radial velocity estimates, we select the measurement that minimizes both the MAD and the systematic offset relative to Gaia radial velocities.

We also notice that radial velocity uncertainties correlate with SNR. To ensure more reliable measurements, we remove the stars within the lowest 5th percentile of SNR in each survey17, which generally correspond to the largest radial velocity uncertainties. The only exception was APOGEE, for which the 5th-percentile SNR cut would have been overly restrictive, removing stars with small radial velocity uncertainties; therefore, the SNR condition was relaxed. In addition, we apply a uniform cut across all surveys, retaining only stars with radial velocity uncertainties smaller than 10 km s−1^{-1}, except for RAVE, as discussed below.

Furthermore, we apply specific quality flags to retain only sources with accurate radial velocity measurements. For APOGEE, we keep only stars with spectrum_flags == 0, removing all objects in APOGEE DR19 with a non-zero bitmask18. For BOSS, we adopt ZWARNING == 0 to exclude spectra with known issues. For the DESI Milky Way Survey, since we use the FERRE pipeline, we apply the quality filters recommended for that catalog, which are CHISQ_TOT < 5, FEH > −4.9, avoiding the stars that accumulate at the edge of the grids, and BESTGRID != “s_rdesi1”, avoiding the stars that were fitted with the PHOENIX grid. For Gaia-ESO, we exclude all spectra flagged19 as SRV, SRO, or BIN, corresponding respectively to suspicious or unreliable radial velocity, suspicious rotational velocity, and identified binaries. For GALAH, we adopt the recommended quality requirement flag_sp == 020 and use a slightly lower SNR (snr_px_ccd3 > 25), which remains consistent with the SNR criteria discussed above and does not affect the radial velocities. Some GALAH objects lack SNR values; for these cases, we replace the missing NaN entries with SNR = 0. For LAMOST LRS and MRS, we retain only stars with reliable radial velocity flags (rv_br_flag == 0). For RAVE, we follow the recommendations of M. Steinmetz et al. (2020) and G. Kordopatis et al. [70], keeping stars that satisfy ∣correctionRV∣<10 km s−1|{\rm correctionRV}| < 10\ {\rm km\ s}^{-1}, σ(RV)<8 km s−1\sigma({\rm RV}) < 8\ {\rm km\ s}^{-1}, and correlationCoeff >10> 10. For SEGUE, to avoid spectra with known problems, we adopt FLAG == “nnnnn”.

We obtain the radial velocity offsets between each spectroscopic survey and Gaia, adopting Gaia radial velocities as the reference. The resulting radial velocity offsets are shown in Figure 2. These offsets, derived from the cleaned sub-samples, are then applied to the entire dataset of each survey, thereby placing all radial velocities on the same scale. This procedure ensures that the radial velocities from the survey catalogs are consistently calibrated and can be used in subsequent analyses. The normalized radial velocities were then used as one of the inputs for the orbit calculation described in the following Section.

Offset between Gaia’s radial velocity and each catalog’s radial velocity

Figure 2. Offset between Gaia’s radial velocity and each catalog’s radial velocity, in km s−1^{-1}. The black dashed line represents the offset, computed from the median of all objects, and the surrounding line represents 1σ1\sigma of the objects.

Finally, we also examine the radial-velocity differences as a function of stellar and observational parameters to assess the consistency of the calibration across different regions of parameter space. The RV differences remain approximately constant across the main parameter ranges. Furthermore, the derived orbital parameters are not strongly sensitive to RV variations at the level of the largest typical survey dispersion. The results of this analysis are presented in Appendix § 15.

Orbital Parameters

To compute the orbital parameters of the stars in our sample, we employ an algorithm adapted from G. Limberg et al. [76]21, which makes use of the AGAMA code (E. Vasiliev [117]), adopting the axisymmetric Galactic potential model described by P. J. McMillan [85].22 The determination of the orbital parameters is carried out using 100 Monte Carlo integrations (see Appendix § 16 for further details). In our analysis, the position of the Sun relative to the Galactic Center is assumed to be (X,Y,Z)⊙=(−8.2,0.0,0.0) kpc(X,Y,Z)_\odot= (-8.2, 0.0, 0.0)\ {\rm kpc}, as outlined in J. Bland-Hawthorn & O. Gerhard [18]. Additionally, the local circular velocity is set to 232.8 km s−1232.8\ {\rm km\ s}^{-1}, consistent with the P. J. McMillan [85] model, while the solar motion with respect to the local standard of rest (LSR) is taken as (U,V,W)⊙=(11.10,12.24,7.25) km s−1(U,V,W)_\odot= (11.10, 12.24, 7.25)\ {\rm km\ s}^{-1}, following the values determined by R. Schönrich et al. [102].

The inputs required for orbit computation are the six-dimensional space of positions and velocities: right ascension (RA), declination (DEC), heliocentric distance (dd), radial velocity (RV), proper motion components (pmRA, pmDEC), and their respective uncertainties.

With the stars’ 6D phase-space information, we integrate their orbits forward in time for 10 Gyr with AGAMA and calculate their eccentricity (ee)23, orbital inclination (ii)24, and pericentric (RperiR_{\rm peri}) and apocentric (RapoR_{\rm apo}) passage, as well as the Galactocentric radius (RmaxR_{\rm max}) and the maximum height above the Galactic plane (ZmaxZ_{\rm max}). We use the Stäckel approximation implemented in AGAMA to calculate the radial and vertical actions, JrJ_r, JzJ_z, respectively. We also provide the Energy (EE), and the total (LtotL_{\rm tot}) and perpendicular (LperpL_{\rm perp}) angular momentum.25 The output also includes the current Galactocentric positions in Cartesian coordinates, velocities in Cartesian (VX,VY,VZ)(V_X,V_Y,V_Z) and cylindrical (Vr,Vϕ,Vz)(V_r,V_\phi,V_z) coordinates, and the Cartesian angular momentum components (LX,LY,LZ)(L_X,L_Y,L_Z). The 16th and 84th percentiles are provided for all quantities, reflecting the propagated uncertainties from the observational measurements. We refer the reader to Appendix § 17 for a full description of the input and output parameters.

For a small fraction of the catalog, AGAMA was unable to compute reliable orbital parameters because one or more input quantities contained outlier values (e.g., unusually high proper motions or large radial-velocity uncertainties), preventing the orbit integration from being completed within the adopted 10 Gyr interval. Whenever more than 16% of the integrations failed, the affected orbital parameters were assigned NaN. Nevertheless, since we still have reliable positions and velocities for these objects, we decided to keep them in the catalog. These cases represent a small fraction of our catalog, ∼0.03%\sim0.03\% for SH, and ∼0.68%\sim0.68\% for BJ.

Canonical component classification

In addition to providing a catalog of kinematic and orbital parameters, we classify stars by their Galactic components using both kinematic and chemical criteria. This classification enables the identification of the canonical stellar populations of the Milky Way, namely the thin disk, thick disk, and halo. A detailed characterization of sub-populations within these components or accreted substructures is beyond the scope of this work.

Kinematical classification

The kinematical classification is based on the probability that a star belongs to a given Galactic component, following the approach presented in H. D. Perottoni et al. [92]. This method builds on the formalism originally introduced by T. Bensby et al. [14], adapted to the cylindrical velocity space (vR,vϕ,vz)(v_R, v_\phi, v_z). In this framework, the probability distribution function follows the velocity ellipsoid prescription given in Eq. B1 of H. D. Perottoni et al. [92]. To account for the radial variation of Galactic rotation, we compute the azimuthal velocity relative to the circular velocity at the star’s Galactocentric radius, adopting the rotation curve of A.-C. Eilers et al. [47].

The parameters defining the velocity ellipsoids for the thin disk, thick disk, and halo are adopted from G. Kordopatis et al. [70] and J. A. S. Amarante et al. [2] and are summarized in Table 2, where VasymV_{\mathrm{asym}} is the asymmetric drift and σVi\sigma_{V_i} refers to the characteristic velocity dispersions in the Galactic component ii. FF is the fraction of stars observed for a given population in the Solar neighborhood. We compute membership likelihoods for each star and use ratios of probabilities of belonging to different Galactic components to assign stars to the corresponding populations.

FFσVr\sigma_{V_r}σVϕ\sigma_{V_\phi}σVZ\sigma_{V_Z}VasymV_{\mathrm{asym}}
Thin disk (D)0.9301302018−28
Thick disk (TD)0.0652614544−63
Halo (H)0.0047160119110−228

Table 2. Parameters for the ellipsoid velocity for each Galactic component at the Solar Neighborhood.

As a result, we include three columns in the catalog that quantify the kinematic membership probabilities for the thin disk (PD_KP_{D\_K}), thick disk (PTD_KP_{TD\_K}), and halo (PT_HP_{T\_H}). These probabilities provide a quantitative measure of the likelihood that each star belongs to a given Galactic component based on its kinematic properties.

We caution, however, that the adopted kinematic classification is based on velocity ellipsoids calibrated in the Solar neighborhood and should therefore be interpreted with care for stars at large heliocentric distances. Although our implementation accounts for the radial variation of the Galactic circular velocity, it does not account for possible changes in the velocity ellipsoids with Galactic position (e.g. [104, 111, 110]). We therefore provide kinematic membership probabilities for all stars in the catalog, but recommend that they be interpreted with caution outside the regime in which the velocity ellipsoids have been calibrated.

Chemical classification

The chemical classification is based on the [Mg/Fe][\mathrm{Mg}/\mathrm{Fe}] vs. [Fe/H][\mathrm{Fe}/\mathrm{H}] diagram, introduced by G. Wallerstein [120] and B. M. Tinsley [113], which links elemental abundance patterns to the chemical evolution of the Milky Way and enables the separation of its main components into the thin disk, thick disk, and halo. We apply this classification to stars observed by APOGEE, GALAH, and LAMOST, the surveys that provide sufficiently precise and homogeneous abundance measurements, allowing us to distinguish the Galactic populations in the [Mg/Fe][\mathrm{Mg}/\mathrm{Fe}]–[Fe/H][\mathrm{Fe}/\mathrm{H}] plane.

The classification is based on simple, survey-specific selection functions defined by piecewise linear relations in the [Mg/Fe][\mathrm{Mg}/\mathrm{Fe}]–[Fe/H][\mathrm{Fe}/\mathrm{H}] plane (see Figure 3). These relations delineate the low-α\alpha, high-α\alpha, and low-metallicity (stellar halo; K. Fuhrmann [50]) populations and are chosen to follow the observed bimodality in each survey. Stars lying above the defined boundary are classified as high-α\alpha, while those below are classified as low-α\alpha. To avoid unnecessarily restricting the combined sample, we define similar, although not identical, selection boundaries in the [Mg/Fe][\mathrm{Mg}/\mathrm{Fe}]–[Fe/H][\mathrm{Fe}/\mathrm{H}] plane for each survey (see Appendix § 18 for details). We use this single abundance space for all three surveys, as they do not provide the same set of elemental abundances, and not all stars have measurements for every element. Although any selection in chemical space inevitably results in some level of contamination between populations, these selection criteria provide a practical way to identify the main Galactic components [1].

Figure 3. [Fe/H][\mathrm{Fe}/\mathrm{H}] vs. [Mg/Fe][\mathrm{Mg}/\mathrm{Fe}] relation for APOGEE, GALAH, and LAMOST MRS. The yellow star indicates the Sun’s position, and the dashed lines divide the graphic into the main local Galactic components.

Catalog Contents

The Full catalog is constructed to include all objects, regardless of data quality or individual measurement precision. We opt to retain all stars (i.e., all objects from each survey without the quality cuts described in Section 2), as they may still be useful for specific scientific applications. For each object, we preserve the survey name and original survey identifier, ensuring easy identification and cross-matching, and allowing users to trace back to the original surveys for additional information not included in our catalog. The identifier columns adopted from original surveys were: DESI: TARGETID; Gaia: source_id; Gaia-ESO: OBJECT; GALAH: sobject_id; LAMOST LRS and MRS: obsid; RAVE: obsID; SEGUE: SPECOBJID. Since SDSS-V does not provide a truly unique identifier for individual observations i.e., when a star has multiple observations, there is no direct way to distinguish them, we constructed a survey identifier based on the SNR. Then, the APOGEE and BOSS survey identifiers in our catalog are sdss_id.SNR. If the user needs to recover the original SDSS identifier, they can extract this information before the first dot in the Survey_ID column.

The catalog contains both the input and output quantities described in § 7, together with the probabilities of membership in each Galactic component (see § 8). We also retain the original signal-to-noise ratio from the spectroscopic surveys. To facilitate the selection of higher-quality subsets, we further define three flags: Clean, Unique, and Golden. The Clean flag identifies stars with highly reliable radial velocities, based on the same criteria adopted for the radial velocity normalization (see § 6). For the three flags, entries satisfying the corresponding criteria are marked as TRUE, while the remaining entries are marked as FALSE. The Unique flag identifies the preferred entry for stars with multiple measurements. This selection follows a hierarchy that accounts for both data quality and quantity: APOGEE, GALAH, LAMOST MRS, Gaia-ESO, RAVE, Gaia, LAMOST LRS, DESI, BOSS, and SEGUE. When multiple observations are present in the same survey, the entry with the highest signal-to-noise ratio is selected. The adopted hierarchy directly affects the Unique flag.

The Golden flag identifies a sample containing only observations that satisfy the Clean criteria. Then, among the observations satisfying these criteria, a single entry per object is selected according to the survey hierarchy adopted for the Unique flag.

Although our analysis focuses on stars bound to the Milky Way, external systems are naturally included because they are present in the original surveys. For this reason, we include a flag to identify stars associated with the Magellanic Clouds, globular clusters, Sagittarius, and dwarf galaxies, identified by cross-matching our catalog with the compilations presented by D. L. Nidever et al. [89], E. Vasiliev & H. Baumgardt [119], P. Ramos et al. [98], and A. B. Pace et al. [90], respectively. The Population flag labels DG for dwarf galaxy members, LMC and SMC for Magellanic Cloud members, Sgr for Sagittarius members, and GC for globular cluster stars. Nevertheless, they constitute only a small fraction of the catalog, comprising 98,166 objects for Bailer-Jones and 55,902 objects for Star-Horse distances (∼0.19%\sim0.19\% and ∼0.13%\sim0.13\% of the Full sample, respectively). Objects associated with the Milky Way potential are flagged as MW.

Overall, the catalog is dominated by thin-disk stars, resulting in their larger contribution to the global distributions (see § 10). Halo stars are the most strongly affected by the quality selections: only 49% are retained in the Clean sample, compared to ∼73%\sim73\% of thin- and thick-disk stars. This reflects the combined impact of larger distance uncertainties and lower signal-to-noise ratios typical of halo targets.

We refer the reader to Appendix § 17 for a description of the columns of our catalog. The final catalog contains 52,423,233 stellar sources for Bailer-Jones distances, and 40,355,569 for StarHorse distances. Among them, the total number of sources flagged as “TRUE” in the Unique category is 41,100,866 and 30,777,133, 44,974,933 and 35,731,134 objects are flagged as “TRUE” in the Clean flag, and 37,776,901 and 29,437,108 are flagged as “TRUE” in the Golden flag, for Bailer-Jones and StarHorse, respectively. The data are summarized in Table 3.

SurveyBJ distancesSH distances
Full sampleUniqueClean SampleGolden SampleFull sampleUniqueClean SampleGolden Sample
APOGEE DR191,074,161955,232498,797461,776846,575746,459409,943377,172
BOSS DR19815,485274,277350,912112,914545,180185,150297,12193,643
DESI DR14,745,4553,865,8492,351,4401,945,4531,846,8971,287,6701,223,080943,647
Gaia RVS DR333,581,72730,684,23933,581,72731,763,20326,660,28124,111,67826,660,28125,035,402
Gaia-ESO DR5109,333104,99877,71975,60153,99352,36841,78741,000
GALAH DR41,062,120838,425569,012480,996960,177766,063528,859447,646
LAMOST LRS DR117,689,7172,722,2965,454,8281,847,1826,603,1832,273,2874,744,4361,568,565
LAMOST MRS DR112,533,8301,026,7251,591,501681,1632,279,215921,3301,443,394616,351
RAVE DR6444,006376,358301,455269,027400,646340,068275,086245,751
SEGUE DR12367,399252,467197,602139,586159,42293,060107,14767,931
Total52,423,23341,100,86644,974,99337,776,90140,355,56930,777,13335,731,13429,437,108

Table 3. Number of objects for each survey.

Results

The spatial distributions of the subsamples flagged as Clean, Unique and Golden, derived using the SH distances, are shown in Figure 4. A feature of these maps is the presence of overdensities towards specific directions, which arise primarily from the surveys’ observational strategies, interstellar extinction, and distance uncertainties. For example, the Large and Small Magellanic Clouds (LMC and SMC) appear elongated along their respective lines of sight, within the ranges −6<X<2-6 < X < 2 kpc, −30<Y<−4-30 < Y < -4 kpc, and −15<Z<0-15 < Z < 0 kpc, due to confusion with Milky Way foreground stars (e.g., F. Anders et al. [3]).

Figure 4. Spatial distribution for the final catalog in Galactocentric coordinates: the Clean catalog (upper panel), Unique (central panel), and Golden (lower panel). The yellow star-shaped dot represents the Sun’s position relative to the Galactic center, marked with the maroon dot.

Kinematic and Dynamical diagrams

Figure 5 presents examples of the kinematic and dynamical space covered in our catalog. In addition to Figure 6, which illustrates the distribution of Golden sample stars (see § 8.2) in the Toomre diagram, color-coded according to their kinematic membership probabilities, the velocity space defined by the radial velocity in the Galactic plane (vRv_R) and the azimuthal velocity (vϕv_\phi) (left column of Figure 5), provides a complementary view of the Galactic components. Across all panels, a prominent concentration of stars is visible around (vϕ,vR)≃(240,0)(v_\phi, v_R) \simeq(240, 0) km s−1^{-1}, corresponding mostly to the thin disk. Halo stars, in contrast, populate a broad region in vRv_R and are characterized by low net cylindrical rotation (vϕ∼0v_\phi\sim0).

Figure 5. Orbital parameters for the final catalog: VrV_r vs. VϕV_\phi (left panel), LZL_Z vs. EE (central panel), and LZL_Z vs. ee (right panel); the superior panels refer to the Clean catalog, the central panels refer to the Unique sample, and the lower panels refer to the Golden sample.

Figure 6. Toomre diagram for SH Golden sample, color-coded according to their probability of belonging to the thin disk (upper panel), thick disk (middle panel), and halo (lower panel). The color bar indicates the membership probability for each Galactic component.

The middle column of Figure 5 shows the distribution of stars in the Lindblad diagram: the plane defined by the vertical component of the angular momentum (LZL_Z) and the orbital energy (EE). Disk stars dominate the region of high prograde angular momentum, whereas halo stars span a wider range of energies and angular momenta, including both prograde and retrograde orbits. More tightly bound stars at lower energies (E≲−2[×105 km2 s−2]E \lesssim-2 [\times10^5\ \mathrm{km^2\ s^{-2}}]) are typically associated with the inner Galaxy. A concentration around LZ∼0[×103 kpc km s−1]L_Z \sim0 [\times10^3\ \mathrm{kpc\ km\ s^{-1}}] and E∼−1.5[×105 km2 s−2]E \sim-1.5 [\times10^5\ \mathrm{km^2\ s^{-2}}] is consistent with debris from the Gaia-Enceladus/Sausage merger event (GSE; A. Helmi et al. [60]; V. Belokurov et al. [12]; M. Haywood et al. [58]; J. T. Mackereth et al. [81]), while stars on more retrograde orbits are generally linked to other accreted populations (e.g. R. P. Naidu et al. [87]; G. Limberg et al. [76]).

The third column of Figure 5 displays the LZL_Z–eccentricity plane. Disk stars are characterized by high angular momentum and low eccentricities, consistent with nearly circular orbits. Halo stars occupy a broader region in this space, spanning a wide range of eccentricities and angular momenta, including both prograde and retrograde orbits. The GSE population is particularly prominent as a concentration of stars with high eccentricities (e≳0.7e \gtrsim0.7) and LZ∼0[×103 kpc km s−1]L_Z \sim0 [\times10^3\ \mathrm{kpc\ km\ s^{-1}}] (e.g. S. Buder et al. [27]; G. Limberg et al. [75]; J. M. M. Lane et al. [73]; A. Carrillo et al. [32]). Several overdensities of retrograde stars with negative LZL_Z and varying eccentricities indicate the contribution of (small) accretion events to the present-day stellar halo (A. Helmi [59]; A. J. Deason & V. Belokurov 2025).

When individual surveys are examined separately (Appendix § 19), the different sky coverages are clearly visible. GALAH, Gaia-ESO, LAMOST MRS, and RAVE are dominated by stars with thin-disk-like dynamics and relatively low dispersions in orbital parameters. In contrast, DESI, Gaia, LAMOST LRS, and SEGUE exhibit broader distributions in energy and angular momentum, reflecting a stronger contribution from halo populations. APOGEE shows pronounced overdensities in kinematic space that correspond to explicitly targeted stellar pop ulations, such as globular clusters and nearby dwarf galaxies.

Eccentricity distributions

Figure 7 shows the eccentricity distribution for the Clean, Unique, and Golden samples selected through the kinematical and chemical classification illustrated in Figure 6. For the kinematical analysis, we define a star as confidently belonging to a certain Galactic component if its membership probability for that component exceeds 80%. In the top panels, we show the eccentricity distribution for different samples selected through the kinematic selection.

Figure 7. Upper panels: Eccentricity distributions for stars classified according to their kinematic membership probabilities in different Galactic regions. The Clean sample, shown by the filled gray distribution, includes stars with kinematic membership probabilities up to 80%. The Unique and Golden samples are shown by the blue solid and orange dashed lines, respectively. Lower panels: Eccentricity distributions for stars classified according to their chemical membership in different Galactic regions, using the same samples. In both panels, the green and purple dotted lines show the Clean sample distributions for probability thresholds of 60% and 90%, respectively. Vertical dotted lines indicate the median eccentricity of each distribution. The number of stars in each sample is indicated in the upper-right corner of each panel.

For chemical classification, we adopt the surveys’ flags for [Fe/H][\mathrm{Fe}/\mathrm{H}] and [Mg/Fe][\mathrm{Mg}/\mathrm{Fe}] abundances, as described in Appendix § 18. The eccentricity distributions obtained from the chemical classification for the subset of stars in APOGEE, GALAH, and LAMOST MRS (Figure 3) show similar behavior for the thin disk, but differ significantly for the thick disk and halo components. This likely reflects the known systematic differences between the chemical and kinematic definitions of the thin and thick disks (e.g. [14, 1]), and the fact that chemical selection does not explicitly separate stellar populations that have undergone substantial dynamical heating, such as the Splash population ([21, 45, 13]) or dynamically heated old disk stars. As a result, the chemically selected thick disk displays a pronounced high-eccentricity tail, while the chemically selected halo contains a non-negligible fraction of stars on low-eccentricity orbits. Nevertheless, the fraction of chemically selected halo stars with low eccentricities diminishes significantly when restricting ourselves to the Golden sample.

We caution that the kinematic criteria used in our classification naturally imprint a characteristic eccentricity distribution. Selection criteria based on the cylindrical velocity operate as selectors of the total peculiar motion with respect to the Local Standard of Rest (LSR), whereas in the low-to-moderate eccentricity regime, epicyclic theory predicts that curves of constant eccentricity in the VXV_X–VYV_Y plane are approximately ellipsoidal and defined by a weighted quadratic combination of the velocity components (see, e.g., Fig. 11 of M. Chiba & Y. Yoshii [33]). By defining the populations through a restricted range of peculiar motions, our kinematic classification preferentially selects stars that occupy a relatively narrow interval of orbital eccentricities. Due to the quadratic relationship between velocities and eccentricity, this kinematic cut acts as a filter that isolates stars with similar orbital properties. This relationship between orbital eccentricity and peculiar motion in the Toomre Diagram is also clearly evident in Figure 11 of L. Magrini et al. [82], as well as in our Figure 6.

Figure 11. Distribution of the differences of VϕV_{\phi} (upper left panel), VrV_r (upper right panel), VzV_z (lower left panel), and ee (lower right panel) for a random sample of 50,000 stars from SEGUE. Each panel compares 50, 100, 200, 300, 400, 600, and 800 MC realizations, relative to the reference solution computed with 1,000 realizations. The values listed in each panel correspond to the median of each difference distribution.

Consequently, the eccentricity distribution of a sample classified through the Toomre Diagram is at least partly shaped by the adopted velocity-space selection criteria. This effect helps explain the differences between the eccentricity distributions obtained from the kinematic and chemical classifications. While chemical classification allows stars with different orbital properties to be associated with the same enrichment history, kinematic classification selects stars according to their location in velocity space and therefore tends to recover a narrower range of eccentricities.

Mapping kinematic substructures in the disk

Figure 8 exemplifies the use of our catalog for the confirmation of, and search for, substructure in the kinematics of the Milky Way disk, in particular the so-called kinematic ridges [7, 64, 97]. The extended spatial coverage of our catalog with respect to the largest single catalog, Gaia DR3, becomes evident when comparing these plots with their respective counterparts in T. Antoja et al. [6], which were based on 25 million stars with DR3 RVS radial velocities and StarHorse distances from F. Anders et al. [4]. Our new plots corroborate the substructures detected in those plots, while extending the maps out to ∼15\sim15 kpc from the Galactic center, reaching regions that were previously dominated by noise.

Figure 8. Kinematic ridges and waves in the Milky Way disk (∣ZGal∣<1.5 kpc|Z_{\mathrm{Gal}}| < 1.5\ \mathrm{kpc}) visible in our Golden sample. Left panel: Ridges in the VϕV_{\phi} vs. Galactocentric distance plane (∣ϕ∣<20 deg|\phi| < 20\ \mathrm{deg}; each pixel is color-coded by the mean Galactocentric radial velocity VRV_R). Right panel: The VRV_R wave in Galactic azimuth ϕGal\phi_{\mathrm{Gal}} vs. angular momentum LZL_Z.

The left panel of Figure 8 shows the median Galactocentric VRV_R as a function of Galactocentric distance and rotational velocity, restricted to a wedge of ∣ϕGal∣<20|\phi_{\rm Gal}| < 20 deg in the Galactic plane. Many of the diagonal ridges in this plot correspond to long-known moving groups of the solar vicinity (e.g. [8, 5]) whose position in velocity space varies with Galactocentric radius (e.g. [97, 11, 67, 15, 16]). The inclination of the ridges depends on the mechanism responsible for their appearance — some of the structures have been associated with resonances of the bar, with spiral arms, and with the response of the Galactic disk to the pericenter passage of the Sagittarius dSph galaxy (see J. A. S. Hunt & E. Vasiliev [62] for a review).

In the outermost region of the disk, we identify two structures consistent in both position and radial velocity with the Anticenter Ridge 1 and 2 identified by T. Antoja et al. [7]. The Anticenter Ridge 2 may represent the low-latitude continuation of the Monoceros Ring [88, 23] (Y. Xu et al. 2015a), which extends to higher Galactic latitudes. The negative radial velocity measured for this structure by M. Lambert et al. [72] using DESI DR2 led those authors to interpret it as a tidally induced arm, following the model proposed by T. Antoja et al. [6].

The right panel of Figure 8 maps the VRV_R waves over a range of angular momenta and Galactic azimuth. This plot was first introduced in J. K. S. Friske & R. Schönrich [49] and is a different representation of the ridges. Each of the structures visible in the top panel of Figure 8 corresponds to a same-color overdensity in the lower panel, in the slice −20-20 deg <ϕGal<+20< \phi_{\rm Gal} < +20 deg. Figure 8 illustrates the potential of our catalog for follow-up kinematic studies, as in this case the larger area covered may allow us to improve our understanding of the dynamical processes causing these ridges (e.g. [31, 17, 57, 72]).

Conclusions

We present a homogeneous stellar catalog that combines multiple large spectroscopic surveys with Gaia DR3 astrometry to derive consistent kinematic, dynamical, and orbital parameters for a broad range of Galactic populations. By leveraging the complementary strengths of different surveys, our catalog achieves improved spatial and kinematic coverage, enabling a more complete description of the Milky Way’s thin disk, thick disk, and halo.

To accommodate different scientific use cases, we provide three complementary samples: the Full catalog, which maximizes completeness; the Clean sample, which prioritizes high-quality astrometry and radial velocities; the Unique sample, which mitigates duplication by selecting a single preferred measurement per star; and the Golden sample, which applies the same quality criteria from the Clean sample while retaining only one observation per star. While these quality-driven selections naturally reduce the representation of halo stars, they ensure robust measurements for more detailed analyses.

In addition, the catalog includes both kinematic and chemical classifications, providing membership probabilities for the main Galactic components based on stellar dynamics and abundance patterns. We also include dedicated flags to identify stars associated with globular clusters, dwarf galaxies, and the Magellanic Clouds, enabling separation of Milky Way field stars from external systems.

The catalog is made publicly available in Zenodo: 10.5281/zenodo.23019541, with documentation of its contents. We expect it to serve as a flexible reference dataset for future studies of the Milky Way, particularly in the context of upcoming spectroscopic surveys and improved astrometric data releases. Identifying new stellar populations and improving the completeness of known populations helps better understand their nature, contributing to Galactic archaeology.

Acknowledgments

N.I.F.S. thanks all those involved with the multi-institutional Milky Way BR Group for the weekly discussions and the StarHorse team for providing their newly computed distances. H.D.P. thanks FAPESP (proc. 2024/17850-1) and acknowledges the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) for the support provided through the Research Productivity Fellowship (Grant No. 309431/2026-3). D.S. acknowledges support from the Foundation for Research and Technological Innovation Support of the State of Sergipe (FAPITEC/ SE) and the National Council for Scientific and Technological Development (CNPq), under grant Nos. 794017/2013 and 444372/2024-5. F.A. acknowledges the grant RYC2021-031683-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union’s NextGenerationEU/PRTR. J.A.S.A. is supported by the National Natural Science Foundation of China under grant No. 12233001, by the National Key R&D Program of China under grant No. 2024YFA1611602, by a Shanghai Natural Science Research Grant (24ZR1491200), by the “111” project of the Ministry of Education under grant No. B20019, and by the China Manned Space Project with No. CMS-CSST2021-B03. J.A.S.A. also thanks the sponsorship from Yangyang Development Fund. G.L. acknowledges support from KICP/UChicago through a KICP Postdoctoral Fellowship. C.P. is supported by the Horizon Europe Marie Skłodowska-Curie Actions Doctoral Network MWGaiaDN (Grant agreement No. 101072454). R.M.S. acknowledges CNPq (Proc. 307726/2025-8). H.D.P.

and N.I.F.S. acknowledge the support of Marco Antonio dos Santos, Danillo Lima de Sousa, Ulisses Manzo Castello, and Tajan Henrique de Amorim in providing access to and assistance with the computing facilities at the CPD-IAG.

This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES) - Finance Code 001.

This work made use of the computing facilities of the Centro de Processamento de Dados do IAG/USP (CPD-IAG), whose purchase was made possible by the Brazilian agency FAPESP (grants 2019/25950-8, 2017/24954-4, and 2009/54006-4). This work was partially supported by the Spanish MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” by the European Union through grant PID2024-157964OB-C21, and the Institute of Cosmos Sciences at the University of Barcelona (ICCUB, Unidad de Excelencia María de Maeztu) through grant CEX2024-001451-M and the project 2021-SGR-00679 GR funded by the Agència de Gestió d’Ajuts Universitaris i de Recerca (Generalitat de Catalunya).

Funding for the Sloan Digital Sky Survey V has been provided by the Alfred P. Sloan Foundation, the Heising-Simons Foundation, the National Science Foundation, and the Participating Institutions. SDSS acknowledges support and resources from the Center for High-Performance Computing at the University of Utah. SDSS telescopes are located at Apache Point Observatory, funded by the Astrophysical Research Consortium and operated by New Mexico State University, and at Las Campanas Observatory, operated by the Carnegie Institution for Science. The SDSS website is www.sdss.org. SDSS is managed by the Astrophysical Research Consortium for the Participating Institutions of the SDSS Collaboration, including the Carnegie Institution for Science, Chílean National Time Allocation Committee (CNTAC) ratified researchers, Caltech, the Gotham Participation Group, Harvard University, Heidelberg University, The Flatiron Institute, The Johns Hopkins University, L’Ecole polytechnique fédérale de Lausanne (EPFL), Leibniz-Institut für Astrophysik Potsdam (AIP), Max-Planck-Institut für Astronomie (MPIA Heidelberg), Max-Planck-Institut für extraterrestrische Physik (MPE), Nanjing University, National Astronomical Observatories of China (NAOC), New Mexico State University, The Ohio State University, Pennsylvania State University, Smithsonian Astrophysical Observatory, Space Telescope Science Institute (STScI), the Stellar Astrophysics Participation Group, Universidad Nacional Autónoma de México, University of Arizona, University of Colorado Boulder, University of Illinois at Urbana-Champaign, University of Toronto, University of Utah, University of Virginia, Yale University, and Yunnan University.

This research used data obtained with the Dark Energy Spectroscopic Instrument (DESI). DESI construction and operations are managed by the Lawrence Berkeley National Laboratory. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of High-Energy Physics, under Contract No. DE–AC02–05CH11231, and by the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility under the same contract. Additional support for DESI was provided by the U.S. National Science Foundation (NSF), Division of Astronomical Sciences under Contract No. AST-0950945 to the NSF’s National Optical-Infrared Astronomy Research Laboratory; the Science and Technology Facilities Council of the United Kingdom; the Gordon and Betty Moore Foundation; the Heising-Simons Foundation; the French Alternative Energies and Atomic Energy Commission (CEA); the National Council of Humanities, Science and Technology of Mexico (CONAHCYT); the Ministry of Science and Innovation of Spain (MICINN), and by the DESI Member Institutions: www.desi.lbl.gov/collaborating-institutions. The DESI collaboration is honored to be permitted to conduct scientific research on ‘Ol̄igām’ Du’ag (Kitt Peak), a mountain with particular significance to the Tohono O’odham Nation. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the U.S. National Science Foundation, the U.S. Department of Energy, or any of the listed funding agencies.

Based on data obtained from the ESO Science Archive Facility with DOI: https://doi.org/10.1872/archive/25.

This work has made use of data from the European Space Agency (ESA) mission Gaia (https://www.cosmos.esa.int/gaia), processed by the Gaia Data Processing and Analysis Consortium (DPAC, https://www.cosmos.esa.int/web/gaia/dpac/consortium). Funding for the DPAC has been provided by national institutions, in particular the institutions participating in the Gaia Multilateral Agreement. This work made use of the Fourth Data Release of the GALAH Survey (S. Buder et al. [28]). The GALAH Survey is based on data acquired through the Australian Astronomical Observatory, under programs: A/2013B/13 (The GALAH pilot survey); A/2014A/25, A/2015A/19, A2017A/18 (The GALAH survey phase 1); A2018A/18 (Open clusters with HERMES); A2019A/1 (Hierarchical star formation in Ori OB1); A/2019A/15, A/2020B/23, R/2022B/5, R/2023A/4, R2023B/5 (The GALAH survey phase 2); A/2015B/19, A/2016A/22, A/2016B/10, A/2017B/16, A/2018B/15 (The HERMES-TESS program); A/2015A/3, A/2015B/1, A/2015B/19, A/2016A/22, A/2016B/12, A/2017A/14, A/2020B/14 (The HERMES K2-follow-up program); R/2022B/02 and A/2023A/09 (Combining asteroseismology and spectroscopy in K2); A/2023A/8 (Resolving the chemical fingerprints of Milky Way mergers); and A/2023B/4 (s-process variations in southern globular clusters). We acknowledge the traditional owners of the land on which the AAT stands, the Gamilaraay people, and pay our respects to elders past and present. This paper includes data that has been provided by AAO Data Central (datacentral.org.au).

Guoshoujing Telescope (the Large Sky Area Multi-Object Fiber Spectroscopic Telescope LAMOST) is a National Major Scientific Project built by the Chinese Academy of Sciences. Funding for the project has been provided by the National Development and Reform Commission. LAMOST is operated and managed by the National Astronomical Observatories, Chinese Academy of Sciences.

Funding for RAVE has been provided by: the Australian Astronomical Observatory; the Leibniz-Institut fuer Astrophysik Potsdam (AIP); the Australian National University; the Australian Research Council; the French National Research Agency; the German Research Foundation (SPP 1177 and SFB 881); the European Research Council (ERC-StG 240271 Galactica); the Istituto Nazionale di Astrofisica at Padova; The Johns Hopkins University; the National Science Foundation of the USA (AST-0908326); the W. M. Keck foundation; the Macquarie University; the Netherlands Research School for Astronomy; the Natural Sciences and Engineering Research Council of Canada; the Slovenian Research Agency (research core funding No. P1-0188); the Swiss National Science Foundation; the Science & Technology Facilities Council of the UK; Opticon; Strasbourg Observatory; and the Universities of Groningen, Heidelberg and Sydney. The RAVE web site is https://www.rave-survey.org.

Funding for SDSS-III has been provided by the Alfred P. Sloan Foundation, the Participating Institutions, the National Science Foundation, and the U.S. Department of Energy Office of Science. The SDSS-III website is http://www.sdss3.org/. SDSS-III is managed by the Astrophysical Research Consortium for the Participating Institutions of the SDSS-III Collaboration including the University of Arizona, the Brazilian Participation Group, Brookhaven National Laboratory, Carnegie Mellon University, University of Florida, the French Participation Group, the German Participation Group, Harvard University, the Instituto de Astrofísica de Canarias, the Michigan State/Notre Dame/JINA Participation Group, Johns Hopkins University, Lawrence Berkeley National Laboratory, Max Planck Institute for Astrophysics, Max Planck Institute for Extraterrestrial Physics, New Mexico State University, New York University, Ohio State University, Pennsylvania State University, University of Portsmouth, Princeton University, the Spanish Participation Group, University of Tokyo, University of Utah, Vanderbilt University, University of Virginia, University of Washington, and Yale University.

Appendix

Comparison between StarHorse and Bailer-Jones

To analyze whether the use of different distance estimates would significantly affect our orbital parameters, we compare the estimates obtained using SH and BJ distances. For illustration, Figure 9 shows the distributions of the differences in VϕV_{\phi}, VrV_r, VzV_z, eccentricity, LzL_z, and energy for different ranges of the parallax fractional uncertainty, σϖ/ϖ\sigma_{\varpi}/\varpi. The comparison reveals no significant systematic offset between the two distance estimates. However, the dispersion of the differences increases with parallax uncertainty, particularly for VϕV_{\phi}, VrV_r, VzV_z, and orbital eccentricity. These results demonstrate that the choice of distance estimator becomes increasingly important in the low signal-to-noise parallax regime.

Distribution of differences between SH- and BJ-derived orbital parameters

Figure 9. Distribution of the differences between SH- and BJ-derived orbital parameters VϕV_{\phi} (upper left panel), VrV_{r} (upper right panel), VzV_{z} (center left panel), eccentricity (center right panel), LzL_{z} (lower left panel) and energy (lower right panel) for the Full sample (in the sense SH − BJ). The orange, green, purple, and brown lines represent stars with σϖ/ϖ<0.1\sigma_{\varpi}/\varpi< 0.1, 0.1<σϖ/ϖ<0.20.1 < \sigma_{\varpi}/\varpi< 0.2, 0.2<σϖ/ϖ<0.30.2 < \sigma_{\varpi}/\varpi< 0.3, and σϖ/ϖ>0.3\sigma_{\varpi}/\varpi> 0.3. The numbers in the upper-left and upper-right corners of each panel are the MAD and the median of the difference, respectively.

Orbital Parameters Dependence of Radial-Velocity Differences

To further assess the consistency of the radial-velocity calibration, we examined the differences between the corrected Gaia radial velocities and the normalized radial velocities of each survey as a function of stellar and observational parameters, including TeffT_{\rm eff}, log⁡g\log g, [Fe/H], GRVSG_{\rm RVS}, and SNR. Overall, the median RV differences remain approximately constant across the main, well-populated parameter ranges, with variations typically within ∼5 km s−1\sim5\ {\rm km\ s}^{-1}. Larger deviations are observed toward the extremes of some parameter distributions, particularly for metal-poor stars, faint sources, and low-SNR spectra. Examples of these extreme cases are shown in Figure 10. The most significant caveats concern BOSS objects with XCSAO_FEH <−1.5< -1.5 and 1 << XCSAO_LOGG <3< 3, corresponding to 12% and 10% of the final BOSS sample, respectively; DESI objects with FEH <−2.5< -2.5, representing 13% of its final sample; Gaia-ESO objects with FEH <−2.5< -2.5, accounting for less than 1% of its final sample; GALAH objects with fe_h <−3< -3 or fe_h >0.7> 0.7, representing approximately 1% of its final sample; LAMOST MRS objects with feh_cnn >0.5> 0.5 or feh_cnn <−2.2< -2.2, corresponding to 18% of its final sample; and RAVE objects with m_H_m <−3< -3, accounting for less than 1% of its final sample. Taken together, these subsets comprise 528,690 objects for StarHorse distances, and 1,124,548 objects for Bailer-Jones distances, corresponding to 3.4% of the full catalog when using SH distances and 2.6% when using BJ distances. Larger dispersions and uncertainties generally accompany these deviations and occur in less populated regions of parameter space, particularly for some low-resolution surveys. Although residual parameter-dependent systematics may therefore affect these subsets, the results do not indicate strong trends across the main parameter ranges that would justify additional corrections. Furthermore, a test in which radial velocities were perturbed by an amount corresponding to the largest typical survey dispersion shows that the derived orbital parameters are not strongly sensitive to RV variations at this level.

Figure 10. Systematic trends in the differences between survey-normalized radial velocities and Gaia radial velocities as a function of log gg (upper panel) and metallicity (lower panel). In the upper panel, the behavior of BOSS stars (orange) is compared with that of APOGEE stars (blue). In the lower panel, results are shown for BOSS (orange), DESI (green), Gaia-ESO (purple), GALAH (brown), LAMOST MRS (gray), and RAVE (lime). The inset panels provide a closer view of the parameter ranges where no significant systematic trends are observed.

Number of Monte Carlo realizations

In this study, we investigated the number of Monte Carlo (MC) iterations necessary to obtain statistically robust orbital parameters. For this purpose, we analyzed a sample of 50,000 random stars from the SEGUE survey, which provides sources representative of all Galactic components ([127, 101]). We tested the performance of the MC algorithm with 100, 200, 300, 400, 600, 800, and 1,000 iterations, using the 1,000-iteration solution as our reference standard and comparing the others against it.

For illustrative purposes, we show in Figure 11 the distribution of comparisons of velocities in cylindrical coordinates, VϕV_{\phi}, VrV_{r}, VzV_{z}, and eccentricity obtained in our tests. We show both MAD and median for each step compared with our 1,000-iteration standard.

Based on this comparison, we selected 100 steps as a suitable compromise between computational efficiency and result accuracy, as shown in Figure 11. The orbital parameters were then determined using 100 integrations.

Catalog columns

In this Appendix, we describe the columns of our catalog. The first 11 columns represent the input information, while the next 22 parameters represent the orbital parameters, obtained using AGAMA. Several parameters, such as velocities, actions, energy, angular momentum, etc, are accompanied by their 16th and 84th percentiles, which we omit here for simplicity. We marked those parameters with a star (*). The next three columns concern the information from the original survey. The four columns after that are the Galactic membership classification, and the last four are the flags we created. We list all available columns in Table 4.

Column nameDescriptionUnits
DR3NameGaia DR3 source ID
RARight ascension (J2000)deg
DECDeclination (J2000)deg
DISTPhotogeometric distance from C. A. L. Bailer-Jones et al. 2021 / Distance from StarHorsekpc
RV_NORM26Radial velocity normalized with Gaia DR3km s−1^{-1}
PMRAProper motion in right ascension directionmas yr−1^{-1}
PMDECProper motion in declination directionmas yr−1^{-1}
e_PMRAStandard uncertainty of proper motion in right ascension directionmas yr−1^{-1}
e_PMDECStandard uncertainty of proper motion in declination directionmas yr−1^{-1}
e_DISTDistance uncertainty of the photogeometric distance from C. A. L. Bailer-Jones et al. 2021 / Distance uncertainty from StarHorsekpc
e_RV26Radial velocity uncertainty from the original surveykm s−1^{-1}
SurveyOriginal spectroscopic survey
Survey_IDSource ID from the original survey
SNRSignal-to-noise ratio from the original survey
Xgal27Galactic Cartesian position for x-axiskpc
Ygal27Galactic Cartesian position for y-axiskpc
Zgal27Galactic Cartesian position for z-axiskpc
Rperi27Pericenter distancekpc
Rapo27Apocenter distancekpc
Rmax27Galactocentric radiuskpc
Zmax27Maximum height above the Galactic planekpc
Ecc27Orbital eccentricity
Incl27Orbital inclinationdeg
Vx27Velocity in Cartesian coordinates for x-axiskm s−1^{-1}
Vy27Velocity in Cartesian coordinates for y-axiskm s−1^{-1}
Vr27Radial velocity in cylindrical coordinateskm s−1^{-1}
Vphi27Azimuthal velocity in cylindrical coordinateskm s−1^{-1}
Vz27Vertical velocity in cylindrical coordinateskm s−1^{-1}
Energy27Total orbital energykm2^{2} s−2^{-2}
Lx27X-component of angular momentum in cartesian coordinateskpc km s−1^{-1}
Ly27Y-component of angular momentum in cartesian coordinateskpc km s−1^{-1}
Lz27Z-component of angular momentum in cartesian coordinateskpc km s−1^{-1}
Ltot27Total angular momentumkpc km s−1^{-1}
Lperp27Perpendicular angular momentumkpc km s−1^{-1}
Jr27Radial action in cylindrical coordinateskpc km s−1^{-1}
Jz27Vertical action in cylindrical coordinateskpc km s−1^{-1}
CleanIndicative flag for accurate radial velocity
UniqueIndicative flag for best measurements for an object
GoldenIndicative flag for best measurements for an object with accurate radial velocity
P_D_KKinematic probability of thin disk membership
P_TD_KKinematic probability of thick disk membership
P_H_KKinematic probability of halo membership
Chemical_membershipGalactic component based on the chemical classification
PopulationIndicative flag for population membership
Used_magIndicative flag for adopted Gaia magnitude in the radial velocity correction

Table 4. Content description of the catalog.

Chemical selection of Galactic components

For our chemical classification in Section 7.2, we used only APOGEE, GALAH, and LAMOST MRS, as they are the only ones with reliable measurements of metallicities ([Fe/H]) and alpha-element abundances ([Mg/Fe]). We were willing to include the chemical classification for Gaia-ESO as well. However, despite the high precision, the disk bimodality was not clearly distinguished, and we opted not to include it.

For those surveys, we apply quality cuts based on their chemical parameters. We adopted the same signal-to-noise ratio cut as before in the Clean sample and ensured that we use only objects with both [Fe/H] and [Mg/Fe] available. Additionally, we apply fe_h_flags == 0 and mg_h_flags == 0 for APOGEE, and flag_fe_h == 0 and flag_mg_fe == 0 for GALAH. LAMOST MRS does not provide a flag related to this. Also, for LAMOST MRS, we used the [Fe/H] from the Convolutional Neural Network (CNN) rather than the pipeline value because we only have [Mg/Fe] from the CNN and wanted to keep it consistent.

The separation between thin disk, thick disk, and halo is based on L. Borbolato et al. [24], and obeys the following equations, which better describe the separation between the populations for each survey:

  • APOGEE: The curve represents [Fe/H] =−1= -1 for [Mg/Fe] >0.17> 0.17, [Mg/Fe] =0.18= 0.18 for the interval −1.0<-1.0 <[Fe/H]<−0.6< -0.6, [Mg/Fe] =−0.15×= -0.15 \times[Fe/H]+0.09+ 0.09 between −0.6<-0.6 <[Fe/H]<0.1< 0.1, [Mg/Fe] =0.08= 0.08 for [Fe/H] >0.1> 0.1, and [Mg/Fe] =−0.556×= -0.556 \times[Fe/H]+0.388+ 0.388 for [Fe/H] >−1> -1.

  • GALAH: The separation lines are [Fe/H] =−1= -1 for [Mg/Fe] >0.233> 0.233, [Mg/Fe] =0.233= 0.233 for the interval −1.0<-1.0 <[Fe/H]<−0.6< -0.6, [Mg/Fe] =−0.19×= -0.19 \times[Fe/H]+0.12+ 0.12 between −0.6<-0.6 <[Fe/H]<0.1< 0.1, [Mg/Fe] =0.101= 0.101 for [Fe/H] >0.1> 0.1, and [Mg/Fe] =−0.538×= -0.538 \times[Fe/H]+0.3076+ 0.3076 for [Fe/H] >−1> -1.

  • LAMOST MRS: It is separated by [Fe/H] =−1= -1 for [Mg/Fe] >0.17> 0.17, [Mg/Fe] =0.18= 0.18 for the interval −1.0<-1.0 <[Fe/H]<−0.6< -0.6, [Mg/Fe] =−0.20×= -0.20 \times[Fe/H]+0.06+ 0.06 between −0.6<-0.6 <[Fe/H]<0.1< 0.1, [Mg/Fe]=0.04= 0.04 for [Fe/H] >0.1> 0.1, and [Mg/Fe] =−0.556×= -0.556 \times[Fe/H]+0.388+ 0.388 for [Fe/H] >−1> -1.

Surveys

When individual surveys are examined separately, their distinct selection functions and spatial coverages become evident (Figure 12 andFigure 13). Gaia RVS and DESI provide the broadest spatial sampling, encompassing all major Galactic components and reaching large distances from the Galactic plane, with DESI preferentially probing the inner halo. SEGUE exhibits a more fragmented and filamentary spatial distribution, reflecting its targeting of distant stars in specific sky fields. In contrast, Gaia-ESO, GALAH, and RAVE are more concentrated toward the Galactic plane, with typically lower ∣Z∣|Z| values. APOGEE partially covers the bulge region and extends toward the Galactic anticenter, while LAMOST LRS and MRS display wide spatial distributions along the Galactic XX axis, tracing predominantly thick-disk populations.

Figure 12. Position graphics, XX vs. ZZ (left panels) and XX vs. YY (right panels) for each spectroscopic survey used in this work, in Galactocentric coordinates. The yellow star indicates the Sun’s position, and the maroon point represents the Galactic center.

Figure 13. Orbital parameters for each spectroscopic survey used in this work, one by line, in Galactocentric coordinates. Kinematic graphics, VRV_R vs. VϕV_\phi (left panels), LZL_Z vs. Energy (center panels), and LZL_Z vs. ee (right panels).

By combining velocity, energy, and action spaces, it becomes possible to identify kinematic structures that are not immediately apparent from spatial distributions alone. Figure 13 illustrates this for APOGEE, showing the VRV_R–VϕV_\phi (left), EE–LZL_Z (middle), and LZL_Z–eccentricity (right) planes. The VRV_R–VϕV_\phi diagram highlights more clearly the concentration of thin-disk stars in surveys such as Gaia-ESO, LAMOST MRS, and RAVE. Consistent with their selection functions, Gaia-ESO, GALAH, LAMOST MRS, and RAVE are dominated by stars on prograde orbits, characteristic of thin-disk kinematics. In contrast, DESI, LAMOST LRS, and SEGUE contain a substantial fraction of stars with halo-like properties.

Although some regions of parameter space remain dominated by specific populations, a significant overlap between components is present, particularly in the Gaia and DESI samples. Part of this dispersion likely reflects increased uncertainties in distances and velocities, especially for faint and distant stars. Nevertheless, several surveys—most notably APOGEE, Gaia-ESO, and GALAH—exhibit clear overdensities in velocity space associated with globular clusters and stellar streams, highlighting the impact of targeted observing strategies.

References

  1. [1]Alinder, S., Bensby, T., & McMillan, P. 2025, arXiv e-prints, arXiv:2511.10092, doi: 10.48550/arXiv.2511.10092DOI
  2. [2]Amarante, J. A. S., Smith, M. C., & Boeche, C. 2020, Monthly Notices of the Royal Astronomical Society, 492, 3816, doi: 10.1093/mnras/staa077DOI
  3. [3]Anders, F., Khalatyan, A., Chiappini, C., et al. 2019, A&A, 628, A94, doi: 10.1051/0004-6361/201935765DOI
  4. [4]Anders, F., Khalatyan, A., Queiroz, A. B. A., et al. 2022, A&A, 658, A91, doi: 10.1051/0004-6361/202142369DOI
  5. [5]Antoja, T., Figueras, F., Fernández, D., & Torra, J. 2008, A&A, 490, 135, doi: 10.1051/0004-6361:200809519DOI
  6. [6]Antoja, T., Ramos, P., López-Guitart, F., et al. 2022, A&A, 668, A61, doi: 10.1051/0004-6361/202244064DOI
  7. [7]Antoja, T., Helmi, A., Romero-Gómez, M., et al. 2018, Nature, 561, 360, doi: 10.1038/s41586-018-0510-7DOI
  8. [8]Asiain, R., Figueras, F., Torra, J., & Chen, B. 1999, A&A, 341, 427
  9. [9]Babusiaux, C., Fabricius, C., Khanna, S., et al. 2023, A&A, 674, A32, doi: 10.1051/0004-6361/202243790DOI
  10. [10]Bailer-Jones, C. A. L., Rybizki, J., Fouesneau, M., Demleitner, M., & Andrae, R. 2021, AJ, 161, 147, doi: 10.3847/1538-3881/abdd806
  11. [11]Barros, D. A., Pérez-Villegas, A., Lépine, J. R. D., Michtchenko, T. A., & Vieira, R. S. S. 2020, ApJ, 888, 75, doi: 10.3847/1538-4357/ab59d1DOI
  12. [12]Belokurov, V., Erkal, D., Evans, N. W., Koposov, S. E., & Deason, A. J. 2018, MNRAS, 478, 611, doi: 10.1093/mnras/sty982DOI
  13. [13]Belokurov, V., Sanders, J. L., Fattahi, A., et al. 2020, MNRAS, 494, 3880, doi: 10.1093/mnras/staa876DOI
  14. [14]Bensby, T., Feltzing, S., & Lundström, I. 2003, A&A, 410, 527, doi: 10.1051/0004-6361:2003213
  15. [15]Bernet, M., Ramos, P., Antoja, T., et al. 2022, A&A, 667, A116, doi: 10.1051/0004-6361/202244070DOI
  16. [16]Bernet, M., Ramos, P., Antoja, T., Monari, G., & Famaey, B. 2024, A&A, 686, A92, doi: 10.1051/0004-6361/202348410DOI
  17. [17]Bernet, M., Ramos, P., Antoja, T., et al. 2025, A&A, 702, A223, doi: 10.1051/0004-6361/202556039DOI
  18. [18]Bland-Hawthorn, J., & Gerhard, O. 2016, ARA&A, 54, 529, doi: 10.1146/annurev-astro-081915-023441
  19. [19]Blecha, A., Cayatte, V., North, P., Royer, F., & Simond, G. 2000, in Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, Vol. 4008, Optical and IR Telescope Instrumentation and Detectors, ed. M. Iye & A. F. Moorwood, 467–474, doi: 10.1117/12.395507DOI
  20. [20]Blomme, R., Frémat, Y., Sartoretti, P., et al. 2023, A&A, 674, A7, doi: 10.1051/0004-6361/202243685DOI
  21. [21]Bonaca, A., Conroy, C., Wetzel, A., Hopkins, P. F., & Kereš, D. 2017, ApJ, 845, 101, doi: 10.3847/1538-4357/aa7d0cDOI
  22. [22]Bonaca, A., & Price-Whelan, A. M. 2025, NewAR, 100, 101713, doi: 10.1016/j.newar.2024.101713DOI
  23. [23]Borbolato, L., Perrottoni, H. D., Rossi, S., et al. 2024, ApJ, 960, 52, doi: 10.3847/1538-4357/ad02fbDOI
  24. [24]Borbolato, L., Rossi, S., Perrottoni, H. D., et al. 2025, ApJ, 994, 126, doi: 10.3847/1538-4357/ae0c96DOI
  25. [25]Bowen, I. S., & Vaughan, Jr., A. H. 1973, ApOpt, 12, 1430, doi: 10.1364/AO.12.001430DOI
  26. [26]Brown, A. G. A. 2021, ARA&A, 59, 59, doi: 10.1146/annurev-astro-112320-035628DOI
  27. [27]Buder, S., Lind, K., Ness, M. K., et al. 2022, MNRAS, 510, 2407, doi: 10.1093/mnras/stab3504DOI
  28. [28]Buder, S., Kos, J., Wang, E. X., et al. 2024, arXiv e-prints, arXiv:2409.19858, doi: 10.48550/arXiv.2409.19858DOI
  29. [29]Cantat-Gaudin, T., & Brandt, T. D. 2021, A&A, 649, A124, doi: 10.1051/0004-6361/202140807
  30. [30]Cantat-Gaudin, T., & Casamiquela, L. 2024, NewAR, 99, 101696, doi: 10.1016/j.newar.2024.101696
  31. [31]Cao, C., Li, Z.-Y., Schönrich, R., & Antoja, T. 2024, ApJ, 975, 292, doi: 10.3847/1538-4357/ad7b0eDOI
  32. [32]Carrillo, A., Deason, A. J., Fattahi, A., Callingham, T. M., & Grand, R. J. J. 2024, MNRAS, 527, 2165, doi: 10.1093/mnras/stad3274DOI
  33. [33]Chiba, M., & Yoshii, Y. 1998, The Astronomical Journal, 115, 168, doi: 10.1086/300177DOI
  34. [34]Cooper, A. P., Koposov, S. E., Allende Prieto, C., et al. 2023, ApJ, 947, 37, doi: 10.3847/1538-4357/acc3c0
  35. [35]Coronado, J., Rix, H.-W., & Trick, W. H. 2018, MNRAS, 481, 2970, doi: 10.1093/mnras/sty2468DOI
  36. [36]Cropper, M., Katz, D., Sartoretti, P., et al. 2018, A&A, 616, A5, doi: 10.1051/0004-6361/201832763DOI
  37. [37]Cui, X.-Q., Zhao, Y.-H., Chu, Y.-Q., et al. 2012, Research in Astronomy and Astrophysics, 12, 1197, doi: 10.1088/1674-4527/12/9/003DOI
  38. [38]De Angeli, F., Weiler, M., Montegriffo, P., et al. 2023, A&A, 674, A2, doi: 10.1051/0004-6361/202243680DOI
  39. [41]Deason, A. J., & Belokurov, V. 2024, NewAR, 99, 101706, doi: 10.1016/j.newar.2024.101706DOI
  40. [42]Dekker, H., D’Odorico, S., Kaufer, A., Delabre, B., & Kotzlowski, H. 2000, in Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, Vol. 4008, Optical and IR Telescope Instrumentation and Detectors, ed. M. Iye & A. F. Moorwood, 534–545, doi: 10.1117/12.395512DOI
  41. [43]Deng, L.-C., Newberg, H. J., Liu, C., et al. 2012, Research in Astronomy and Astrophysics, 12, 735, doi: 10.1088/1674-4527/12/7/003DOI
  42. [44]DESI Collaboration, Abdul Karim, M., Adame, A. G., et al. 2026, AJ, 171, 285, doi: 10.3847/1538-3881/ae4c43
  43. [45]Di Matteo, P., Haywood, M., Lehnert, M. D., et al. 2019, A&A, 632, A4, doi: 10.1051/0004-6361/201834929DOI
  44. [46]Doliva-Dolinsky, A., Collins, M. L. M., & Martin, N. F. 2025, arXiv e-prints, arXiv:2502.06948, doi: 10.48550/arXiv.2502.06948DOI
  45. [47]Eilers, A.-C., Hogg, D. W., Rix, H.-W., & Ness, M. K. 2019, ApJ, 871, 120, doi: 10.3847/1538-4357/aaf648DOI
  46. [48]Eisenstein, D. J., Weinberg, D. H., Agol, E., et al. 2011, AJ, 142, 72, doi: 10.1088/0004-6256/142/3/72DOI
  47. [49]Friske, J. K. S., & Schönrich, R. 2019, MNRAS, 490, 5414, doi: 10.1093/mnras/stz2951DOI
  48. [50]Fuhrmann, K. 1998, A&A, 338, 161
  49. [51]Gaia Collaboration, Prusti, T., de Bruijne, J. H. J., et al. 2016, A&A, 595, A1, doi: 10.1051/0004-6361/201629272DOI
  50. [52]Gaia Collaboration, Brown, A. G. A., Vallenàri, A., et al. 2021, A&A, 649, A1, doi: 10.1051/0004-6361/202039657
  51. [53]Gaia Collaboration, Vallenari, A., Brown, A. G. A., et al. 2023, A&A, 674, A1, doi: 10.1051/0004-6361/202243940
  52. [54]García Pérez, A. E., Allende Prieto, C., Holtzman, J. A., et al. 2016, AJ, 151, 144, doi: 10.3847/0004-6256/151/6/144DOI
  53. [55]Gilmore, G., Randich, S., Worley, C. C., et al. 2022, A&A, 666, A120, doi: 10.1051/0004-6361/202243134DOI
  54. [56]Gunn, J. E., Siegmund, W. A., Mannery, E. J., et al. 2006, AJ, 131, 2332, doi: 10.1086/500975DOI
  55. [57]Hamilton, C., Mummery, A., & Bland-Hawthorn, J. 2026, arXiv e-prints, arXiv:2602.06182, doi: 10.48550/arXiv.2602.06182DOI
  56. [58]Haywood, M., Di Matteo, P., Lehnert, M. D., et al. 2018, ApJ, 863, 113, doi: 10.3847/1538-4357/aad235DOI
  57. [59]Helmi, A. 2020, ARA&A, 58, 205, doi: 10.1146/annurev-astro-032620-021917DOI
  58. [60]Helmi, A., Babusiaux, C., Koppelman, H. H., et al. 2018, Nature, 563, 85, doi: 10.1038/s41586-018-0625-xDOI
  59. [61]Hunt, J. A. S., Bub, M. W., Bovy, J., et al. 2019, MNRAS, 490, 1026, doi: 10.1093/mnras/stz2667DOI
  60. [62]Hunt, J. A. S., & Vasiliev, E. 2025, NewAR, 100, 101721, doi: 10.1016/j.newar.2024.101721DOI
  61. [63]Katz, D., Sartoretti, P., Guerrier, A., et al. 2023, A&A, 674, A5, doi: 10.1051/0004-6361/202244220DOI
  62. [64]Kawata, D., Baba, J., Ciuča, I., et al. 2018, MNRAS, 479, L108, doi: 10.1093/mnrasl/sly107DOI
  63. [65]Kawata, D., Grand, R. J. J., Hunt, J. A. S., & Ciuča, I. 2026, in Encyclopedia of Astrophysics, Volume 4, Vol. 4, 38–60, doi: 10.1016/B978-0-443-21439-4.00064-XDOI
  64. [66]Khalatyan, A., Anders, F., Chiappini, C., et al. 2024, A&A, 691, A98, doi: 10.1051/0004-6361/202451427DOI
  65. [67]Khoperskov, S., & Gerhard, O. 2022, A&A, 663, A38, doi: 10.1051/0004-6361/202141836DOI
  66. [68]Kollmeier, J. A., Rix, H.-W., Aerts, C., et al. 2026, AJ, 171, 52, doi: 10.3847/1538-3881/ae0576DOI
  67. [69]Koposov, S. E., Allende Prieto, C., Cooper, A. P., et al. 2024, MNRAS, 533, 1012, doi: 10.1093/mnras/stae1842DOI
  68. [70]Kordopatis, G., Gilmore, G., Wyse, R. F. G., et al. 2013, MNRAS, 436, 3231, doi: 10.1093/mnras/stt1804DOI
  69. [71]Kounkel, M., Zari, E., Covey, K., et al. 2023, ApJS, 266, 10, doi: 10.3847/1538-4365/acc106DOI
  70. [72]Lambert, M., Rockosi, C. M., Koposov, S. E., et al. 2026, AJ, 171, 292, doi: 10.3847/1538-3881/ae5100DOI
  71. [73]Lane, J. M. M., Bovy, J., & Mackereth, J. T. 2023, MNRAS, 526, 1209, doi: 10.1093/mnras/stad2834DOI
  72. [74]Lee, Y. S., Beers, T. C., Sivarani, T., et al. 2008, AJ, 136, 2022, doi: 10.1088/0004-6256/136/5/2022DOI
  73. [75]Limberg, G., Souza, S. O., Pérez-Villegas, A., et al. 2022, ApJ, 935, 109, doi: 10.3847/1538-4357/ac8159DOI
  74. [76]Limberg, G., Rossi, S., Beers, T. C., et al. 2021, ApJ, 907, 10, doi: 10.3847/1538-4357/acb87
  75. [77]Lindegren, L., Klioner, S. A., Hernández, J., et al. 2021, A&A, 649, A2, doi: 10.1051/0004-6361/202039709DOI
  76. [78]Liu, C., Fu, J., Shi, J., et al. 2020, arXiv e-prints, arXiv:2005.07210, doi: 10.48550/arXiv.2005.07210DOI
  77. [79]Luo, A. L., Zhao, Y.-H., Zhao, G., et al. 2015, Research in Astronomy and Astrophysics, 15, 1095, doi: 10.1088/1674-4527/15/8/002DOI
  78. [80]Luri, X., Brown, A. G. A., Sarro, L. M., et al. 2018, A&A, 616, A9, doi: 10.1051/0004-6361/201832964DOI
  79. [81]Mackereth, J. T., Schiavon, R. P., Pfeffer, J., et al. 2019, MNRAS, 482, 3426, doi: 10.1093/mnras/sty2955DOI
  80. [82]Magrini, L., Danielski, C., Bossini, D., et al. 2022, A&A, 663, A161, doi: 10.1051/0004-6361/202243405DOI
  81. [83]Majewski, S. R., Schiavon, R. P., Frinchaboy, P. M., et al. 2017, AJ, 154, 94, doi: 10.3847/1538-3881/aa784dDOI
  82. [84]Martell, S. L., Sharma, S., Buder, S., et al. 2017, MNRAS, 465, 3203, doi: 10.1093/mnras/stw2835DOI
  83. [85]McMillan, P. J. 2017, MNRAS, 465, 76, doi: 10.1093/mnras/stw2759DOI
  84. [86]Montegriffo, P., De Angeli, F., Andrae, R., et al. 2023, A&A, 674, A3, doi: 10.1051/0004-6361/202243880DOI
  85. [87]Naidu, R. P., Conroy, C., Bonaca, A., et al. 2020, ApJ, 901, 48, doi: 10.3847/1538-4357/abaef4DOI
  86. [88]Newberg, H. J., Yanny, B., Rockosi, C., et al. 2002, ApJ, 569, 245, doi: 10.1086/338983DOI
  87. [89]Nidever, D. L., Hasselquist, S., Hayes, C. R. R., et al. 2020, ApJ, 895, 88, doi: 10.3847/1538-4357/ab7305DOI
  88. [90]Pace, A. B., Erkal, D., & Li, T. S. 2022, ApJ, 940, 136, doi: 10.3847/1538-4357/ac997bDOI
  89. [91]Pasquini, L., Avila, G., Allaert, E., et al. 2000, in Society of Photo-Optical Instrumentation Engineers (SPIE) Conference Series, Vol. 4008, Optical and IR Telescope Instrumentation and Detectors, ed. M. Iye & A. F. Moorwood, 129–140, doi: 10.1117/12.395491
  90. [92]Perottoni, H. D., Amarante, J. A. S., Limberg, G., et al. 2021, The Astrophysical Journal Letters, 913, L3, doi: 10.3847/2041-8213/abfb06
  91. [93]Perryman, M. 2025, arXiv e-prints, arXiv:2509.10883, doi: 10.48550/arXiv.2509.10883
  92. [94]Perryman, M. A. C., de Boer, K. S., Gilmore, G., et al. 2001, A&A, 369, 339, doi: 10.1051/0004-6361:20010085DOI
  93. [95]Queiroz, A. B. A., Anders, F., Santiago, B. X., et al. 2018, MNRAS, 476, 2556, doi: 10.1093/mnras/sty330DOI
  94. [96]Queiroz, A. B. A., Anders, F., Chiappini, C., et al. 2023, A&A, 673, A155, doi: 10.1051/0004-6361/202245399DOI
  95. [97]Ramos, P., Antoja, T., & Figueras, F. 2018, A&A, 619, A72, doi: 10.1051/0004-6361/201833494DOI
  96. [98]Ramos, P., Antoja, T., Yuan, Z., et al. 2022, A&A, 666, A64, doi: 10.1051/0004-6361/202142830DOI
  97. [99]Randich, S., Gilmore, G., & Gaia-ESO Consortium. 2013, The Messenger, 154, 47
  98. [100]Randich, S., Gilmore, G., Magrini, L., et al. 2022, A&A, 666, A121, doi: 10.1051/0004-6361/202243141DOI
  99. [101]Rockosi, C. M., Lee, Y. S., Morrison, H. L., et al. 2022, ApJS, 259, 60, doi: 10.3847/1538-4365/ac5323DOI
  100. [102]Schönrich, R., Binney, J., & Dehnen, W. 2010, MNRAS, 403, 1829, doi: 10.1111/j.1365-2966.2010.16253.xDOI
  101. [103]SDSS Collaboration, Adamane Pallathadka, G., Aghakhanloo, M., et al. 2025, arXiv e-prints, arXiv:2507.07093, doi: 10.48550/arXiv.2507.07093
  102. [104]Sharma, S., Hayden, M. R., Bland-Hawthorn, J., et al. 2021, Monthly Notices of the Royal Astronomical Society, 506, 1761–1776, doi: 10.1093/mnras/stab1086
  103. [105]Sheinis, A., Anguiano, B., Asplund, M., et al. 2015, Journal of Astronomical Telescopes, Instruments, and Systems, 1, 035002, doi: 10.1117/1.JATIS.1.3.035002
  104. [106]Smee, S. A., Gunn, J. E., Uomoto, A., et al. 2013, AJ, 146, 32, doi: 10.1088/0004-6256/146/2/32DOI
  105. [107]Steinmetz, M., Zwitter, T., Siebert, A., et al. 2006, AJ, 132, 1645, doi: 10.1086/506564DOI
  106. [110]Sun, W., Shen, H., Jiang, B., & Liu, X. 2025, ApJ, 979, 103, doi: 10.3847/1538-4357/ad9d41DOI
  107. [111]Sun, W., Shen, H., & Liu, X. 2023, ApJ, 952, 163, doi: 10.3847/1538-4357/acdb58DOI
  108. [112]Taylor, M. B. 2005, in Astronomical Society of the Pacific Conference Series, Vol. 347, Astronomical Data Analysis Software and Systems XIV, ed. P. Shopbell, M. Britton, & R. Ebert, 29
  109. [113]Tinsley, B. M. 1980, FCPh, 5, 287, doi: 10.48550/arXiv.2203.02041
  110. [114]Trick, W. H., Coronado, J., & Rix, H.-W. 2019, MNRAS, 484, 3291, doi: 10.1093/mnras/stz209DOI
  111. [115]Tsantaki, M., Pancino, E., Marrese, P., et al. 2022, A&A, 659, A95, doi: 10.1051/0004-6361/202141702DOI
  112. [116]Turchi, A., Pancino, E., Avdeeva, A., et al. 2025, A&A, 700, A195, doi: 10.1051/0004-6361/202555695DOI
  113. [117]Vasiliev, E. 2019, MNRAS, 482, 1525, doi: 10.1093/mnras/sty2672DOI
  114. [118]Vasiliev, E. 2023, Galaxies, 11, 59, doi: 10.3390/galaxies11020059DOI
  115. [119]Vasiliev, E., & Baumgardt, H. 2021, MNRAS, 505, 5978, doi: 10.1093/mnras/stab1475DOI
  116. [120]Wallerstein, G. 1962, ApJS, 6, 407, doi: 10.1086/190067DOI
  117. [121]Wang, R., Luo, A. L., Chen, J. J., et al. 2019, ApJS, 244, 27, doi: 10.3847/1538-4365/ab3cc0DOI
  118. [122]Watson, F. G., Bogatu, G., Saunders, W., et al. 2001, in Astronomical Society of the Pacific Conference Series, Vol. 232, The New Era of Wide Field Astronomy, ed. R. Clowes, A. Adamson, & G. Bromage, 421
  119. [123]Weiler, M. 2025, arXiv e-prints, arXiv:2505.16588, doi: 10.48550/arXiv.2505.16588
  120. [124]Wilson, J. C., Hearty, F. R., Skrutskie, M. F., et al. 2019, PASP, 131, 055001, doi: 10.1088/1538-3873/ab0075DOI
  121. [126]Yan, H., Li, H., Wang, S., et al. 2022, The Innovation, 3, 100224, doi: 10.1016/j.xinn.2022.100224
  122. [127]Yanny, B., Rockosi, C., Newberg, H. J., et al. 2009, AJ, 137, 4377, doi: 10.1088/0004-6256/137/5/4377DOI
  123. [128]York, D. G., Adelman, J., Anderson, Jr., J. E., et al. 2000, AJ, 120, 1579, doi: 10.1086/301513DOI
  124. [129]Zhao, G., Zhao, Y.-H., Chu, Y.-Q., Jing, Y.-P., & Deng, L.-C. 2012, Research in Astronomy and Astrophysics, 12, 723, doi: 10.1088/1674-4527/12/7/002

Paper details

vlnc:W_eudta47x
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents