betaFeedback

WorksPhysics and Astronomy

Some Relationships for the Inter-Atomic Potential Models Describing the Interaction between the Chemically Different Type Atoms

Abstract

Three-parametric Lenard-Jones and Morse interatomic potentials are the simplest ones, which that can be used to obtain thermophysical properties of the liquid and solid substances. Upon adjusting the model parameters to real substance properties, the interatomic potentials can be used to describe simple mono-component substance with good accuracy. Usually, these tree parameters can be found from the cohesion energy, bulk moduli and the molar volume data or the lattice parameters, obtained experimentally for pure chemically crystalline materials. In our paper, in case of chemically different atoms, for both the Lenard-Jones potential type and the Morse ones, or any other three-parametric potential type, we propose some convenient model relationships expressing the corresponding three parameters through the previously found ones for pure chemical elements.

Introduction

Finding the semi-empirical interatomic interaction potentials is an important task for many aims. First, it may be initial starting point for the modeling of different thermodynamic properties of liquids and solids consisting of pure chemical element and also of multiple chemical components. The Lenard-Jones [1, 2, 3] and Morse [6] potentials are the simplest ones, which that can be used to obtain thermophysical properties of the liquid and solid substances. These potentials are mathematically simple and, therefore, often used in different computer simulation studies. Due to their mathematical simplicity and generic modeling capabilities, the mentioned potentials are probably still the most frequently studied model potentials. The Lenard-Jones potential is usually the standard choice for the development of theories for matter (especially soft-matter) as well as for the development and testing of computational methods and algorithms. Upon adjusting the model parameters to real substance properties, the interatomic potentials can be used to describe simple substance with good accuracy. Usually, these parameters can be found from the cohesion energy, bulk moduli and the molar volume data or the lattice parameters, obtained experimentally for pure chemically mono-component crystalline materials [4, 5, 7]. These ideas have been also applied to study some other properties of crystalline solids [8, 9, 11]. Nevertheless, finding similar parameters for interatomic potentials in case of chemically different interacting atoms is not so easy and the problem is still very actual.

In our paper, in case of chemically different atoms, for both the Lenard-Jones potential type and the Morse ones, or any other three-parametric potential type, we propose some convenient model relationships expressing the corresponding three parameters through the previously found ones for pure chemical elements.

Parameterizations of the Lenard-Jones and Morse Potentials

Here, we introduce two three-parametric potentials, namely, the Lenard-Jones type (LJ-type) and also the Morse type (M-type) potential interaction energy between two neighbouring same atoms in the following form:

uLJ(r)=ε((r/a)−2n−2(r/a)−n)anduM(r)=ε(e−2β((r/a)−1)−2e−β((r/a)−1)).(1)u_{LJ}(r)=\varepsilon\left((r/a)^{-2n}-2(r/a)^{-n}\right) \quad\text{and} \quad u_{M}(r)=\varepsilon\left(e^{-2\beta((r/a)-1)}-2e^{-\beta((r/a)-1)}\right). \tag*{(1)}

They have three parameters, LJ{ε,a,n}\{\varepsilon, a, n\} and M{ε,a,β}\{\varepsilon, a, \beta\}, respectively. Here, rr means the interatomic distance. Both interaction energy models uP(r)u_P(r) (with P{ε,a,n}\{\varepsilon, a, n\} for LJ or P{ε,a,β}\{\varepsilon, a, \beta\} for M) have minima at r=ar=a, where uP(a)=−εu_P(a)=-\varepsilon characterizes the bonding energy of two same atoms at the equilibrium distance between them. The exponent parameters, n,βn,\beta and 2n,2β2n,2\beta, characterize the decrease or increase rate of the attractive energy parts and the repulsive ones, as the interatomic separation distance rr changes.

Instead of these three parameters, we can introduce a new set of universal parameters like the equilibrium interatomic bond length aa, elastic stiffness of interatomic bonds kk and the elastic cutoff distance cc, where

k=uP′′(a),c=2ε/k.(2)k=u_P^{\prime\prime}(a), \qquad c=\sqrt{2\varepsilon/k}. \tag*{(2)}

In particular, for the Lenard-Jones potential,

kLJ=2εn2/a2,c=a/n.(3)k_{LJ}=2\varepsilon n^2/a^2, \qquad c=a/n. \tag*{(3)}

And, for the Morse model, we obtain a similar result:

kM=2εβ2/a2,c=a/β.(4)k_M=2\varepsilon\beta^2/a^2, \qquad c=a/\beta. \tag*{(4)}

Both interatomic potentials of LJ and M types and as well as so-called Elastic-Bond potential model calculated at the β=n=5\beta=n=5 values are shown in Figure 1. In these both cases and also in any other three-parametric interatomic potential models we will use the following ‘model-independent’ (universal) relationships:

Three-parametric Lenard-Jones, Morse and parabolic Elastic-Bond interatomic potentials

Figure 1. Three-parametric Lenard-Jones, Morse and parabolic Elastic-Bond interatomic potentials calculated at equal bonding energy ε=1\varepsilon= 1 and β=n=5\beta= n = 5.

k=2ε/c2,ε=12kc2.(5)k=2\varepsilon/c^2, \qquad\varepsilon=\frac{1}{2}kc^2. \tag*{(5)}

Here, we have introduced so called Elastic-Bond potential:

uEB(r)=ε(−1+(γ(r/a−1))2)(6)u_{EB}(r)=\varepsilon\left(-1+\left(\gamma\left(r/a-1\right)\right)^2\right) \tag*{(6)}

and the equations similar to Eqs. (3), (4), obtained for the Lenard-Jones and Morse potentials,

kEB=2εγ2/a2,c=a/γ.(7)k_{EB}=2\varepsilon\gamma^2/a^2,\qquad c=a/\gamma. \tag*{(7)}

It also shown in Figure 1 and calculated at γ=β=n=5\gamma= \beta= n = 5. As it follows from Figure 1, the elastic cutoff parameter cc introduced in Eq. (2) characterizes interatomic distance where Elastic-Bond potential takes a zero value: uEB(a+c)=0u_{EB}(a+c)=0 that means that the elastic bond is broken at this distance. So, this parameter can be used for any interatomic potential model as well.

Summary_1.

In present subsection, for any three-parametric potential uP(r)u_P(r), instead of corresponding three parameters we can introduce a new set of universal parameters like the equilibrium interatomic bond length aa, where: uP′(a)=0u'_P(a)=0, the inter-atomic coupling energy uP(a)=−εu_P(a)=-\varepsilon, the elastic stiffness of inter-atomic bond k=uP′′(a)k=u''_P(a) and the elastic cutoff distance c=2ε/kc=\sqrt{2\varepsilon/k}. Finally, we have introduced convenient dimensionless potential parameter η=a/c\eta=a/c. Using these ones, the inter-atomic potential itself can be represented as follows:

uP(r)=εφη(ra).(8)u_P(r)=\varepsilon\varphi_\eta\left(\frac{r}{a}\right). \tag*{(8)}

Here, the dimensionless potential function φη(x)\varphi_\eta(x) depends only on the dimensionless interatomic separation distance xx and a single potential parameter η\eta. In case of the Lenard-Jones and Morse potentials: η=β=n\eta=\beta=n.

Finding parameters from the experimental data

To find these parameters most of researchers use the cohesion energy, bulk moduli and the molar volume (or lattice parameter) data such as represented in Table 1 for some f.c.c and b.c.c transition metals taken from [10, 12, 13, 14].

UnitsV b.c.cNb b.c.cTa b.c.cCr b.c.cMo b.c.cW b.c.cFe b.c.c
EmE_{\mathrm{m}}(kJ/mol)512730782395658859413
KK(GPa)160170200160230310170
Vm(10−6 m3)V_{\mathrm{m}}(10^{-6}\,\mathrm{m}^{3})8.33710.8410.877.2329.3349.5507.092
KVm/EmKV_{\mathrm{m}}/E_{\mathrm{m}}2.592.522.782.933.263.452.92
UnitsNi f.c.cPd f.c.cPt f.c.cCu f.c.cAg f.c.cAu f.c.cRh f.c.cIr f.c.c
EmE_{\mathrm{m}}(kJ/mol)428376564336284368554670
KK(GPa)180180230140100220380320
Vm(10−6 m3)V_{\mathrm{m}}(10^{-6}\,\mathrm{m}^{3})6.5898.8519.0957.09210.2810.218.2668.520
KVm/EmKV_{\mathrm{m}}/E_{\mathrm{m}}2.774.233.712.953.616.325.473.42

Table 1. Cohesive energy, bulk modulus and molar volume interpolated to 0K00\mathrm{K}^{0} temperature for some f.c.c and b.c.c metals (experimental data).

Using Eq. (1), one can write the molar internal energy at zero temperature for the crystalline material as function of the nearest neighbour distance rr as follows:

U(r)=12NA∑i=1Kcziuη(rpi)=12NAε∑i=1Kcziφη(rapi)=12NAεΦη(ra)(9)U(r)=\frac{1}{2}N_{\mathrm{A}}\sum_{i=1}^{K_{\mathrm{c}}}z_i u_{\eta}(r p_i)=\frac{1}{2}N_{\mathrm{A}}\varepsilon\sum_{i=1}^{K_{\mathrm{c}}}z_i\varphi_{\eta}\left(\frac{r}{a}p_i\right)=\frac{1}{2}N_{\mathrm{A}}\varepsilon\Phi_{\eta}\left(\frac{r}{a}\right) \tag*{(9)}

Here, summation is performed over a set of KcK_{\mathrm{c}} nearest coordination spheres: i=1,2,…Kci=1,2,\ldots K_{\mathrm{c}}, where ziz_i denotes the number of atoms on the ii-th coordination sphere. NA=6.02214076×1023/molN_{\mathrm{A}}=6.02214076 \times10^{23}/\mathrm{mol} is the well-known Avogadro’s number, and pip_i is a set of dimensionless distances to the ii-th coordination sphere.

We also, introduced a dimensionless Lenard-Jones or Morse potential function φη(x)\varphi_{\eta}(x) having a minimum at x=1x=1, where φη(1)=−1\varphi_{\eta}(1)=-1 and the second derivative value is φη′′(1)=2η2\varphi_{\eta}''(1)=2\eta^{2} and η=β=n\eta=\beta=n for M and LD type potentials, respectively. Further, we will denote Ψη(x)=12Φη(ra)=12Φη(x)\Psi_{\eta}(x)=\frac{1}{2}\Phi_{\eta}\left(\frac{r}{a}\right)=\frac{1}{2}\Phi_{\eta}(x), as the dimensionless crystal energy per atom. Normally, the internal energy of a crystal must be represented as a function of the molar volume Vm=NAv(r)V_{\mathrm{m}}=N_{\mathrm{A}}v(r) where, v(r)v(r) is the volume per single atom in a given crystalline material. For many ideal crystal structures like f.c.c, h.c.p and b.c.c there is a simple relationship between the atomic volume and the nearest neighbour distance v(r)=qr3v(r)=qr^{3} where, qq is a constant dependent on a particular crystal geometry. At the equilibrium distance r=rer=r_{\mathrm{e}}, where,

(ddrU(V(r)))r=re=NAεΨη′(xe)=0,(10)\left(\frac{d}{dr}U\left(V(r)\right)\right)_{r=r_{\mathrm{e}}}=N_{\mathrm{A}}\varepsilon\Psi_{\eta}'(x_{\mathrm{e}})=0, \tag*{(10)}

we can obtain a dimensionless ratio xe=re/ax_{\mathrm{e}}=r_{\mathrm{e}}/a and also the equilibrium molar volume:

Vm(re)=NAqre3.(11)V_m(r_e)=N_A q r_e^3 . \tag*{(11)}

Therefore, using Eqs. (8)–(9), one can obtain the bulk modulus KK at zero temperature as follows:

K=Vm(d2U(V)dV2∣V=Vm)=ε19qre2Ψη′′(xe).(12)K=V_m\left(\left.\frac{d^2U(V)}{dV^2}\right|_{V=V_m}\right)=\varepsilon\frac{1}{9qr_e^2}\Psi_\eta^{\prime\prime}(x_e). \tag*{(12)}

On the other hand, at zero temperature, the molar cohesive energy is:

Em=−U(Vm)=−NAεΨη(xe).(13)E_m=-U(V_m)=-N_A\varepsilon\Psi_\eta(x_e). \tag*{(13)}

From Eqs. (12), (13) it follows an important dimensionless relationship between the cohesive energy, bulk modulus and the molar volume:

VmKEm=−19xe2Ψη′′(xe)Ψη(xe)(14)\frac{V_mK}{E_m}=-\frac{1}{9}x_e^2\frac{\Psi_\eta^{\prime\prime}(x_e)}{\Psi_\eta(x_e)} \tag*{(14)}

Here, xe=xe(η)x_e=x_e(\eta) is a value minimizing the dimensionless cohesion energy function that can be obtained solving Eq. (10). It depends obviously on the dimensionless parameter η={n,β,γ}\eta=\{n,\beta,\gamma\} of any interatomic potential discussed in the present paper or some other ones too. So, Eq. (14) gives a possibility finding this one parameter as function of the experimental dimensionless quantity (VmK/Em)(V_mK/E_m):

η=η(VmKEm).(15)\eta=\eta\left(\frac{V_mK}{E_m}\right). \tag*{(15)}

The second parameter, namely, the bonding energy one can find from Eq. (13):

ε=−Em/NAΨη(xe(η)).(16)\varepsilon=-\frac{E_m/N_A}{\Psi_\eta(x_e(\eta))}. \tag*{(16)}

And the final, third parameter, i.e, the bonding length aa is

a=d/xe(η).(17)a=d/x_e(\eta). \tag*{(17)}

Here, dd is the experimentally measured nearest neighbour distance in b.c.c, f.c.c, or h.c.p structure or calculated from the known atomic volume:

v(d)=qd3=Vm/NA,(18)v(d)=qd^3=V_m/N_A, \tag*{(18)}

where, qbcc=4/(33)=0.7698q_{bcc}=4/(3\sqrt{3})=0.7698; qfcc=1/2=0.7071q_{fcc}=1/\sqrt{2}=0.7071, and, obviously,

dbcc=3(2vbcc)1/3/2;dfcc=(4vfcc)1/3/2.(19)d_{bcc}=\sqrt{3}(2v_{bcc})^{1/3}/2;\quad d_{fcc}=(4v_{fcc})^{1/3}/\sqrt{2}. \tag*{(19)}

The data given in Table 1 can be used to calculate all the interatomic potential parameters. Normally, it can be done applying appropriate numerical methods. But here, we restrict ourselves by the simplest nearest neighbour approach by setting in Eq. (9) Kc=1K_c=1 and Ψη(x)=12φη(x)\Psi_\eta(x)=\frac{1}{2}\varphi_\eta(x) and finding from Eq. (10) φ′(xℓ)=0⇒xℓ=1\varphi'(x_{\ell})=0 \Rightarrow x_{\ell}=1. After that, one can see: Ψη(1)=−z12\Psi_{\eta}(1)=-\frac{z_{1}}{2} Ψη′′(1)=z122η2\Psi_{\eta}''(1)=\frac{z_{1}}{2}2\eta^{2} (η={n,β,γ}\eta=\{n,\beta,\gamma\}).

Finally, using Eq. (14) we obtain:

VmKEm=29η2orη=3VmK2Em.(20)\frac{V_{m}K}{E_{m}}=\frac{2}{9}\eta^{2}\qquad\text{or}\qquad\eta=3\sqrt{\frac{V_{m}K}{2E_{m}}}. \tag*{(20)}

At the same time, from the Eqs. (16), (17) we find the two remained potential parameters:

ε=2z1(EmNA);anda=d.(21)\varepsilon=\frac{2}{z_{1}}\left(\frac{E_{m}}{N_{A}}\right);\qquad\text{and}\qquad a=d. \tag*{(21)}

All the parameters characterizing the model Lenard-Jones and Morse potentials consistent with experimental data are collected in Tables 2a-2b. It should mentioned that the potential parameters for the b.c.c lattice were calculated using both the first and second coordination sphere setting in Eq. (9) Kc=2K_{c}=2. The reason of that is the known elastic instability of b.c.c lattices in the nearest neighbour approach in respect to it’s shear distortion.

BCC Metalεa\varepsilon_{a} (eV)vav_{a} (A˚3\mathring{\mathrm{A}}^{3})dd (A˚\mathring{\mathrm{A}})β\betaε\varepsilon (eV)kk (eV/A˚3\mathring{\mathrm{A}}^{3})cc (A˚\mathring{\mathrm{A}})
V5,3113,844012,6199593,4139420,8844933,0036380,767429
Nb7,5718,000372,8595723,3674921,2610943,4977460,84917
Ta8,1118,050182,8622083,5369481,3509254,1258770,809231
Cr4,0912,005782,498453,6311160,6823732,8826390,688067
Mo6,8215,492932,7201023,8301441,1367124,5075460,710183
W8,9015,858262,7413163,9401781,4839456,1314210,695734
Fe4,2811,77332,4822193,6249140,7134683,0431250,684766

Table 2a. Cohesive energy per atom (eV), volume per atom (A3^{3}) and the nearest neighbour distance (A) together with the potential parameters calculated from the experimental data in the nearest neighbour approach for some bcc metals.

FCC Metalεa\varepsilon_a (eV)vav_a (Å3^3)dd (Å)β\betaε\varepsilon (eV)kk (eV/Å3^3)cc (Å)
Ni4,4410,943032,4920163,5305810,7393812,9681710,705837
Pd3,9014,695872,7493934,3629120,649553,271310,630174
Pt5,8515,111012,7750414,0859520,9743254,2245560,679167
Cu3,4811,77332,5535113,6434870,5804492,3634850,700843
Ag2,9417,070462,8901484,0305090,4906171,9083260,717068
Au3,8116,954222,8835735,3329170,635734,3488070,540712
Rh5,7413,732752,6879694,9613510,9570496,5210240,541782
Ir6,9414,147892,7147863,9230091,1574424,8338910,692016

Table 2b. Cohesive energy per atom (eV), volume per atom (Å3^3) and the nearest neighbour distance (Å) together with the potential parameters calculated from the experimental data in the nearest neighbour approach for some fcc metals.

Summary_2.

In present subsection, we have discussed a procedure of finding the potential parameters using the cohesion energy, bulk modulus and the molar volume (or lattice parameter) data represented in the Table 1 for some f.c.c and b.c.c transition metals. The idea using these experimental data has been proposed quite long ago and, then, was applied by many other researchers mainly limiting themselves by LJ- and M- cases [4, 5, 7]. The main reason for us is to formulate the finding procedure to be maximally independent on a particular potential type. So, we did everything in dimensionless form. The basic crystal energy function we have defined as a sum of the individual dimensionless interatomic potentials taken over some appropriate number KcK_c of coordination spheres according to Eq. (9).

Ψη(x)=12∑i=1Kcziφη(xpi).(22)\Psi_\eta(x)=\frac{1}{2}\sum_{i=1}^{K_c}z_i\varphi_\eta(xp_i). \tag*{(22)}

Then, making minimizing procedure, one can find the equilibrium dimensionless nearest-neighbour distance x=xe(η)x=x_e(\eta) dependent on the potential parameter η\eta in a given crystal lattice with a given set of coordination numbers {zi}\{z_i\} and a set of dimensionless distances {pi}\{p_i\} to the ii-th coordination sphere. Finally, using Eq. (14), we obtain parameter η\eta as a function of the only dimensionless experimental parameter χ=VmK/Em\chi=V_mK/E_m: η=η(χ)\eta=\eta(\chi), and also two remaining potential parameters:

ε(χ)=−em/Ψ(xe(η(χ)))anda(χ)=d/xe(η(χ)).(23)\varepsilon(\chi)=-e_m/\Psi(x_e(\eta(\chi))) \qquad\text{and} \qquad a(\chi)=d/x_e(\eta(\chi)). \tag*{(23)}

Here, em=Em/NAe_m=E_m/N_A is the cohesive energy per atom and dd is the experimentally measured distance between the nearest atoms in b.c.c f.c.c or h.c.p type crystals.

Modeling interatomic potentials for chemically different type atoms

In present section, we will propose some simple ideas, which allow constructing the interatomic potential for two chemically different atoms A and B, shown schematically in Fig.2.

Two ball-shaped chemically different atoms A and B with interatomic distances and forces

Figure 2. This scheme represents two ball-shaped chemically different atoms A and B producing weak forces when the distance between them slightly changes.

These atoms are placed at some interatomic distance rAB=(rA+rB)/2r_{AB}=(r_A+r_B)/2 where, rAr_A and rBr_B denote the bond length for AA or BB type interacting atoms, respectively. Here ff is a force taking zero value if atoms A and B are at their equilibrium distances: rA=aAr_A=a_A and rB=aBr_B=a_B. But the interaction forces acting between the atoms (all equal due to Newton’s third law) will supposedly change linearly, if rAr_A and rBr_B will experience some small changes: rA=aA+δaAr_A=a_A+\delta a_A and rB=aB+δaBr_B=a_B+\delta a_B, as follows from equations below.

f=kAδaAandf=kBδaB(24)f=k_A\delta a_A \qquad\text{and} \qquad f=k_B\delta a_B \tag*{(24)}

Here, kA,kBk_A,k_B are the elastic bond stiffness parameters introduced in previous section. A similar relationship can be supposedly written for the AB bonds:

f=kABδaAB;where,δaAB=(δaA+δaB)/2(25)f=k_{AB}\delta a_{AB}; \qquad\text{where,} \qquad\delta a_{AB}=(\delta a_A+\delta a_B)/2 \tag*{(25)}

Combining these equations, one can obtain relationships for the elastic-bond stiffness parameters for the AB-type interatomic bonds as function of the stiffness parameters for the AA and BB ones, respectively.

1/kAB=(1/kA+1/kB)/2(26)1/k_{AB}=(1/k_A+1/k_B)/2 \tag*{(26)}

Along with this important equation, one can use a similar additive rule for the equilibrium bond length aa. The elastic cutoff distance cABc_{AB} introduced in the previous section we will represent generally consisting of the half-additive contribution (cA+cB)/2(c_A+c_B)/2 and a difference cABexc=cAB−(cA+cB)/2c_{AB}^{exc}=c_{AB}-(c_A+c_B)/2 as indicated in Eq.(26).

aAB=(aA+aB)/2,cAB=(cA+cB)/2+cABexc.(27)a_{AB}=(a_A+a_B)/2, \qquad c_{AB}=(c_A+c_B)/2+c_{AB}^{exc}. \tag*{(27)}

Later we will show that this so-called c-excess parameter cABexcc_{AB}^{\mathrm{exc}} is small, but nevertheless plays a very important role. These three relationships give us full description of all three parameters for the Lennard-Jones and Morse potential, or any other three-parametric potentials as well. In particular, the bonding energy between the AB atoms can be easily found from the following equation:

cAB2εAB=(cA2εA+cB2εB)/2.(28)\frac{c_{AB}^{2}}{\varepsilon_{AB}}=\left(\frac{c_{A}^{2}}{\varepsilon_{A}}+\frac{c_{B}^{2}}{\varepsilon_{B}}\right)/2. \tag*{(28)}

One can also obtain the following relationships for the exponent parameters nn, β\beta Lennard-Jones and Morse potentials: nAB=βAB=aAB/cABn_{AB}=\beta_{AB}=a_{AB}/c_{AB}.

(28) is very important for many applications for ordered or disordered binary alloys to predict their thermodynamic properties at different atomic concentrations.

In order to analyze and discuss this equation, it is more convenient to express it in a dimensionless form:

1(εAB/ε)=((cA2cAB2)1(εA/ε)+(cB2cAB2)1(εB/ε))/2,where,ε=(εA+εB)/2.(29)\frac{1}{\left(\varepsilon_{AB}/\varepsilon\right)}=\left(\left(\frac{c_{A}^{2}}{c_{AB}^{2}}\right)\frac{1}{\left(\varepsilon_{A}/\varepsilon\right)}+\left(\frac{c_{B}^{2}}{c_{AB}^{2}}\right)\frac{1}{\left(\varepsilon_{B}/\varepsilon\right)}\right)/2,\qquad\text{where},\quad\varepsilon=\left(\varepsilon_{A}+\varepsilon_{B}\right)/2. \tag*{(29)}

One can also express parameters εA\varepsilon_{A}, εB\varepsilon_{B} as follows:

εA=(εA+εB)/2+(εA−εB)/2,εB=(εA+εB)/2−(εA−εB)/2.(30)\varepsilon_{A}=\left(\varepsilon_{A}+\varepsilon_{B}\right)/2+\left(\varepsilon_{A}-\varepsilon_{B}\right)/2,\qquad\varepsilon_{B}=\left(\varepsilon_{A}+\varepsilon_{B}\right)/2-\left(\varepsilon_{A}-\varepsilon_{B}\right)/2. \tag*{(30)}

The same can be done for parameters cAc_{A}, cBc_{B} as well:

cA=(cA+cB)/2+(cA−cB)/2,cB=(cA+cB)/2−(cA−cB)/2(31)c_{A}=\left(c_{A}+c_{B}\right)/2+\left(c_{A}-c_{B}\right)/2,\qquad c_{B}=\left(c_{A}+c_{B}\right)/2-\left(c_{A}-c_{B}\right)/2 \tag*{(31)}

or the corresponding dimensionless relationships:

εA/ε=1+(εA−εB)/2ε,εB/ε=1−(εA−εB)/2ε,(32)\varepsilon_{A}/\varepsilon=1+\left(\varepsilon_{A}-\varepsilon_{B}\right)/2\varepsilon,\qquad\varepsilon_{B}/\varepsilon=1-\left(\varepsilon_{A}-\varepsilon_{B}\right)/2\varepsilon, \tag*{(32)}

and

cA/cAB=1+(cA−cB)/2c,cB/cAB=1−(cA−cB)/2c.(33)c_{A}/c_{AB}=1+\left(c_{A}-c_{B}\right)/2c,\qquad c_{B}/c_{AB}=1-\left(c_{A}-c_{B}\right)/2c. \tag*{(33)}

Therefore, Eq.(28) is expressed through the following two dimensionless parameters with c=(cA+cB)/2c=\left(c_{A}+c_{B}\right)/2 and ε=(εA+εB)/2\varepsilon=\left(\varepsilon_{A}+\varepsilon_{B}\right)/2:

wAB=(cA−cB)/2c(∣wAB∣≤1),ωAB=(εA−εB)/2ε(∣ωAB∣≤1).(34)w_{AB}=\left(c_{A}-c_{B}\right)/2c\quad\left(\lvert w_{AB}\rvert\leq1\right),\qquad\omega_{AB}=\left(\varepsilon_{A}-\varepsilon_{B}\right)/2\varepsilon\quad\left(\lvert\omega_{AB}\rvert\leq1\right). \tag*{(34)}

So, finally, from Eq.(28-33)we obtain:

1(εAB/ε)=(ccAB)2((1+wAB)21+ωAB+(1−wAB)21−ωAB)/2(35)\frac{1}{\left(\varepsilon_{AB}/\varepsilon\right)}=\left(\frac{c}{c_{AB}}\right)^{2}\left(\frac{\left(1+w_{AB}\right)^{2}}{1+\omega_{AB}}+\frac{\left(1-w_{AB}\right)^{2}}{1-\omega_{AB}}\right)/2 \tag*{(35)}

and then find:

εABε=2(cABc)2((1+wAB)2(1+ωAB)2+(1−wAB)2(1−ωAB)2)−1=(cABc)2FAB(ωAB,wAB).(36)\frac{\varepsilon_{AB}}{\varepsilon}=2\left(\frac{c_{AB}}{c}\right)^2\left(\frac{(1+w_{AB})^2}{(1+\omega_{AB})^2}+\frac{(1-w_{AB})^2}{(1-\omega_{AB})^2}\right)^{-1}=\left(\frac{c_{AB}}{c}\right)^2F_{AB}\left(\omega_{AB},w_{AB}\right). \tag*{(36)}

One can observe that FAB(ωAB,wAB)F_{AB}\left(\omega_{AB},w_{AB}\right) takes exactly unit values FAB(ωAB,wAB)=1F_{AB}\left(\omega_{AB},w_{AB}\right)=1 everywhere at the straight line ωAB=wAB\omega_{AB}=w_{AB} within the square box region −1≤ωAB≤1-1\leq\omega_{AB}\leq1; and −1≤wAB≤1-1\leq w_{AB}\leq1 and FAB(ωAB,wAB)<1F_{AB}\left(\omega_{AB},w_{AB}\right)<1 in other cases.

3D image of the $F_{AB}\left(w_{AB},\omega_{AB}\right)$-surface

(a) representing 3D image of the FAB(wAB,ωAB)F_{AB}\left(w_{AB},\omega_{AB}\right)-surface calculated from Eq.35. Here, XAB=wAB=(cA−cB)/(cA+cB)X_{AB}=w_{AB}=(c_A-c_B)/(c_A+c_B), YAB=ωAB=(εA−εB)/(εA+εB)Y_{AB}=\omega_{AB}=(\varepsilon_A-\varepsilon_B)/(\varepsilon_A+\varepsilon_B) and ZAB=FAB(wAB,ωAB)Z_{AB}=F_{AB}\left(w_{AB},\omega_{AB}\right).

2D image of the $F_{AB}\left(w_{AB},\omega_{AB}\right)$-surface

(b) representing 2D image of the FAB(wAB,ωAB)F_{AB}\left(w_{AB},\omega_{AB}\right)-surface calculated from Eq.35. Here, XAB=wAB=(cA−cB)/(cA+cB)X_{AB}=w_{AB}=(c_A-c_B)/(c_A+c_B) and YAB=ωAB=(εA−εB)/(εA+εB)Y_{AB}=\omega_{AB}=(\varepsilon_A-\varepsilon_B)/(\varepsilon_A+\varepsilon_B).

Figure 2 (PDF p. 10).

Summary_3

In present section, we have proposed some simple ideas, which allowed constructing the interatomic potential parameters for two chemically different atoms A and B. For this aim, we have considered the interatomic distance changes δAA(f),δBB(f),δAB(f)\delta_{AA}(f),\delta_{BB}(f),\delta_{AB}(f) produced by the same weak force ff applied to AA, BB and AB atomic pairs. We also assumed that, similarly to the equilibrium interatomic bond length rule aAB=(aAB+aAB)/2a_{AB}=(a_{AB}+a_{AB})/2 the additional distance changes will follow the same rule: δAB=(δAB+δAB)/2\delta_{AB}=(\delta_{AB}+\delta_{AB})/2. As a result, the important relationship between the interatomic stiffness parameters, 1/kAB=(1/kA+1/kB)/21/k_{AB}=(1/k_A+1/k_B)/2 has been obtained in Eq. (26). It also gives a corresponding relationship for the energy coupling parameters: cAB2/εAB=(cA2/εA+cB2/εB)/2c_{AB}^{2}/\varepsilon_{AB}=(c_A^{2}/\varepsilon_A+c_B^{2}/\varepsilon_B)/2. Finally’ introducing two new variables wAB=(cA−cB)/(cA+cB)w_{AB}=(c_A-c_B)/(c_A+c_B) and ωAB=(εA−εB)/(εA+εB)\omega_{AB}=(\varepsilon_A-\varepsilon_B)/(\varepsilon_A+\varepsilon_B),one can obtain a fully dimensionless relationship

εABε=(cABc)2FAB(ωAB,wAB).(37)\frac{\varepsilon_{AB}}{\varepsilon}=\left(\frac{c_{AB}}{c}\right)^2F_{AB}(\omega_{AB},w_{AB}). \tag*{(37)}

where c=(cA+cB)/2c=(c_A+c_B)/2, ε=(εA+εB)/2\varepsilon=(\varepsilon_A+\varepsilon_B)/2, and FAB(ωAB,wAB)F_{AB}(\omega_{AB},w_{AB}) is the function defined in (36). In present subsection in (27), we have also assumed that cAB=c+cABexcc_{AB}=c+c_{AB}^{exc} and obtained (36). There is a serious reason to introduce a new positively defined function gAB(ωAB,wAB)=(cAB/c)2=(1+cABexc/c)2≈1+2cABexc/cg_{AB}(\omega_{AB},w_{AB})=(c_{AB}/c)^2=(1+c_{AB}^{exc}/c)^2\approx1+2c_{AB}^{exc}/c, which depends on the same variables like FAB(ωAB,wAB)F_{AB}(\omega_{AB},w_{AB}) does. As FAB(ωAB,wAB)F_{AB}(\omega_{AB},w_{AB}), and gAB(ωAB,wAB)g_{AB}(\omega_{AB},w_{AB}) must approach to the unit value as (ωAB→0,wAB→0)(\omega_{AB}\to0,w_{AB}\to0) and both can be expanded as FAB(ωAB,wAB)≈1−(ωAB−wAB)2F_{AB}(\omega_{AB},w_{AB})\approx1-(\omega_{AB}-w_{AB})^2 and gAB(ωAB,wAB)≈1+(P1(ωAB)2+P2ωABwAB+P3(wAB)2)g_{AB}(\omega_{AB},w_{AB})\approx1+\left(P_1(\omega_{AB})^2+P_2\omega_{AB}w_{AB}+P_3(w_{AB})^2\right) in this limit respectively. The fact, that these expansions do not contain the linear terms is due to the inversion symmetry requirement gAB(ωAB,wAB)=gAB(−ωAB,−wAB)g_{AB}(\omega_{AB},w_{AB})=g_{AB}(-\omega_{AB},-w_{AB}). So, in this case we will have:

εABε≈1+((P1−1)(ωAB)2+P2(ωAB)(wAB)+P3(wAB)2).(38)\frac{\varepsilon_{AB}}{\varepsilon}\approx1+\left((P_1-1)(\omega_{AB})^2+P_2(\omega_{AB})(w_{AB})+P_3(w_{AB})^2\right). \tag*{(38)}

Here P1P_1, P2P_2 and P3P_3 are some fitting constants, which should be found from the analysis of some (minimum three) binary phase diagrams.

We are not going to discuss the appropriate procedure for that in details in the present paper and will do that somewhere else. We should only to mention that it is convenient to choose the disordered binary alloys like Cu-Ni, Ni-Au and Cu-Rh. All them have a good solubility at high temperatures, but, experience decomposition below some characteristic temperatures Tmax⁡T_{\max} and concentrations xmax⁡x_{\max}. In case of Cu-Ni these parameters are (tmax⁡=355C∘, xmax⁡=0.673)(t_{\max}=355\mathrm{C}^{\circ},\ x_{\max}=0.673) for Ni-Au (tmax⁡=812C∘, xmax⁡=0.29)(t_{\max}=812\mathrm{C}^{\circ},\ x_{\max}=0.29) and for Cu-Rh alloy (tmax⁡=812C∘, xmax⁡=0.29)(t_{\max}=812\mathrm{C}^{\circ},\ x_{\max}=0.29) [15] correspondingly. There is also a simple relationship between these parameters the energy excess energy (1/xmax⁡+1/(1−xmax⁡))(kTmax⁡/Zeexc)=2(1/x_{\max}+1/(1-x_{\max}))(kT_{\max}/Ze^{exc})=2, where Tmax⁡T_{\max} is the absolute temperature in K∘^{\circ} and Z=12Z=12 is the coordination number in our case of f.c.c.-lattice.

References

  1. [1][1]. J.E. Jones, Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 106 (738), (1924) 441–462.
  2. [2][2]. J.E. Jones, Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 106 (738), (1924) 463–477.
  3. [3][3]. J.E. Lennard-Jones, (1931-09-01). Proceedings of the Physical Society. 43 (5): 461–482.
  4. [4][4]. Shu Zhen and G. J. Davies, Physica Status Solidi (A) 78 (2), (1983-08-16) 595–605.
  5. [5][5]. T. Halicioglu and G. M. Pound, Physica Status Solidi (A) 30 (2), (1975-08-16) 619–623.
  6. [6][6]. P.M. Morse, Phys. Rev. Vol. 34, (1929) 57–64.
  7. [7][7]. L.A. Girifalco, G.V. Weizer, Phys. Rev. Vol. 114, No.3, (1959) p.687.
  8. [8][8]. L. Cheng and J. Yang, J. Chem. Phys. 127, 124104 (2007).
  9. [9][9]. R.C. Lincoln, K.M. Koliwad and P.B. Ghate, Phys. Rev. Second Series, Vol.157, No 3, (1967) 463-466.
  10. [10][10]. Ch. Kittel, Introduction to Solid State Physics (7th ed.) by Wiley & Sons, Inc., 1966.
  11. [11][11]. Nguyen Van Hung1, Trinh Thi Huel, Nguyen Ba Duc2, VNU Journal of Science: Mathematics – Physics, Vol. 31, No. 3 (2015) 23-30.
  12. [12][12]. Landolt-Börnstein, Ed. K.L. Schäfer and G. Beggerow, Vol. 2, Part 1, Springer-Verlag, Berlin 1971 (p.378).
  13. [13][13]. R. Hultgren, P.D. Desai, D.T. Hawkins,M. Gleiser and K.K. Kelley, Selected Values of Thermodynamic Properties of the Elements, ASM, Ohio 1973.
  14. [14][14]. Landolt-Börnstein, Ed. H. Borchers, K.L. Schäfer and G. Beggerow, Vol. 2, Part 4, Springer-Verlag, Berlin 1971 (p.403).
  15. [15][15]. O.M. Barabash and Yu.N. Koval, Crystal Structure of Metals and Alloys, ed. by L.N. Larikov, Kiev, ’Naukova Dumka’, 1986, 597p. (rus.).

Paper details

vlnc:W_ff937rts
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 6

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents