WorksPhysics and Astronomy
Quantum Spin Hall Effect and Su-Schrieffer-Heeger Model Implementation in Novel C3N-based Dumbbell Morphologies
Abstract
Two-dimensional carbon nitride materials have been the center of attention for their diverse usage in energy harvesting, environmental remediation and nanoelectronic applications. A broad range of utilities with decent synthetic plausibility have made this family a sweet spot to dive into, whereas the underlying analytical aspects are yet to have prominence. Recently, using the machinaries of first principles, we reported a family of six different structures C3NX with a unique dumbbell-shaped morphology, functionalizing the recently synthesized monolayer of C3N. Here we have critically explored the non-trivial topological phases of the semimetallic Dumbbell C3NX sheets and nanoribbons. Spin-orbit coupling induced gap across the Fermi level, its subsequent tuning via an external electric field, portrayal of band inversion from the Berry curvature distribution and the evaluation of topological index using the Wannier charge center (WCC) firmly establishes the traces of topological footprint. The real space decimation scheme and Green function technique evaluate the underlying spectral information with corresponding transport characteristics. Fascinating features of these quasi-1D systems are observed utilizing the Su-Schrieffer-Heeger (SSH) model where different twisted phases reveal distinct topological signatures even in a low atomic mass system like DB C4N.
Introduction
Two-dimensional (2D) group-IV elemental monolayers and their various allotropes have drawn an enormous amount of attention since the realization of graphene in 2004 [1]. Over the years, systems such as silicene, germanene and stanene have all been experimentally synthesized [2, 3, 4, 5, 6] with the presence of the Dirac cone having large Fermi velocities. Taking into account the spin-orbit coupling (SOC) interaction, all these structures display a finite gap opening at the high-symmetry ‘K’ point about the Fermi level, which in turn provides the possibility for quantum spin Hall (QSH) effect [7, 8, 9] at ambient temperatures [10]. This interaction strength is usually very weak for materials especially which are composed of light-mass elements. Since then, a pool of efforts has been made to circumvent and realize this zero bandgap nature (without SOC) of graphene with the unobservably small SOC-induced gap [11, 12, 13, 14, 15]. One very worthy technique is to substitute the parts of carbon atoms with nitrogens, resulting in distinct structures. Comparable atomic radii of N atoms allow themselves to fit in different positions within graphene which for different compositions and configurations exhibit a wide range of properties with various novel applications [16, 17, 18, 19, 20, 21, 22, 23, 24, 25]. However, topological insulator (TI) states were never been on the scene for carbon nitrides until the arrival of monolayer s-triazine, chemically known as g- which displayed stronger SOC than that of graphene and silicene [26]. These special quantum states of matter have drawn enormous research interest in condensed matter physics due to their unconventional electronic properties with promising technological applications [27]. This topologically protected behaviour of the electronic wavefunction originates from the symmetries inherent in physical systems encapsulated by topological invariants [28]. In particular, distinct symmetries, namely, chiral, time-reversal, and charge-conjugation symmetry, impart a robust topological response, resulting in the emergence of topologically protected zero-energy edge states. The simplest model to examine the topological behavior is the famous Su–Schrieffer–Heeger (SSH) model [29], describing a one-dimensional (1D) dimerized chain of atoms that can be either in a metallic phase or insulating phase depending on the ratio of the hopping parameters. Despite numerous promising outcomes [27], the recognition and examination of topological insulators have been confined to a handful of known crystal structures [30].
Probing these quantum states of various 2D semimetallic systems whether planar or buckled with different symmetries - hexagonal, rectangular or square by various schemes has spilled out some fascinating physics over the years [31, 32, 33, 34]. In 2017, Yang. et al. showed a controllable large-scale synthesis of a 2D crystalline, hole-free carbon-nitride system called CN, famously called the 2D polyaniline (PANI) through polymerization which carries some excellent features like ultrahigh mechanical strength, moderate indirect bandgap, optical tunability over the entire visible spectrum and low-temperature ferromagnetism [35]. Following these impressive outcomes, a large section of current research is devoted to the further enrichment of this monolayer graphene-like CN through the tuning of its electronic structure via doping, strain engineering or applying external electric field [36, 37, 38]. Apart from the aforementioned gr-IV buckled hexagonal honeycomb systems, another very different and morphologically distinct model known as the dumbbell (DB) structure has also been proposed [39, 40]. As opposed to the electronic structure of stanene, its DB form showed an inverted band gap at the center of the Brillouin zone and is reported to maintain a nontrivial topology [41]. Also, the recently synthesized DB silicene [42], found to be the true ground state of silicene, behaves as a room-temperature topological insulator under anisotropic strain with a gap achievable up to 36 meV [43]. In 2015, Ozcelik et al. reported a shortcoming for this kind of formation that DB structures cannot be achieved if the adatom and the adsorbent both involve a layer of honeycomb carbon atoms [40]. But later, two different dumbbell forms are obtained from this single layer CN through the adsorption of carbon (C) atoms with semi-metallic electronic structure [44]. In our recent work, we have discovered a whole new family of six distinct DB systems, spontaneously built out of adsorbing some special adatoms on this newly synthesized monolayer of CN [45]. Based on the type and nature of the adsorbates, these systems electronically develop both semi-metallic and semiconducting features which is quite intriguing for both analytic and application purposes.
Shedding light on the underlying analytic regime, here we have shown the distinct topological phases of the DB-CNX sheets through the interplay between the SOC and band gap modulation with an external electric field. Following that, we have further shown the spectral information with the corresponding transmission probability for the quasi-1D ribbon using real space decimation and Green’s function formalism. This leads us towards a complete and rigid understanding of the topological signature of these concerned systems. In particular, using the potential SSH model we have shown how two different twisted phases of the nanoribbons show topological inequivalence.
Methodology
Our first-principles calculations for the Dumbbell CNX systems were conducted within the density functional theory (DFT) framework using the QUANTUM ESPRESSO code [46, 47]. The kinetic energy cut-offs of 44 Ry and 46 Ry were employed for CNX sheet and nanoribbons, respectively. Besides, ultrasoft pseudopotentials [48] are utilized to represent the core electrons in both cases. In our electronic structure calculations, the incorporation of the spin-orbit coupling effect was achieved through the utilization of full relativistic pseudopotentials. Furthermore, to minimize interactions between periodic images, a vacuum region of approximately 20 Å was incorporated along the non-periodic directions for both the sheet and nanoribbons. The van der Waals interactions are included in the stacked structure by using DFT-D3 method. The plane-wave energy cutoff is set to be 500 eV and the energy convergence criterion in the self-consistency process is eV. The Brillouin zone was sampled using a uniform Γ-centered -mesh of for the sheet and for the nanoribbons. The phonon dispersion calculations are performed via the finite displacement method using the open-source Phonopy code by considering a supercell. The thermal stability of these structures are also examined under ab initio molecular dynamics (AIMD) in the canonical ensemble (NVT). The temperature of these systems are regulated by the Nose–Hoover thermostat.
Figure 1. Relaxed unit cell of the family of semi-metallic dumbbell CNX system. Here figure (a) shows the side view, (b) the top view and (c) the adatoms responsible for dumbbell formation. Figure-(d) shows the full 2D sheet which is periodic in both and directions. The C (brown), N (grey) and X (blue) are the carbon, nitrogen and adatoms (C, Si and Ge) respectively.
Structural detail and electronic nature
The concerned family of structures DB-CNX is obtained through the adsorption of some special adatoms (B, C, Si, Ge, P and As) from group-III, IV and V of the periodic table on the recently synthesized monolayer of CN or the two-dimensional polyaniline [35, 49]. The host atom N gets pushed by the two adatoms (X) on the top (and bottom) and forms a distinct buckled dumbbell-like morphology (Fig. 1). Interestingly, only those elements participate in forming this unique structural arrangement whose electronegativities are comparable to that of carbon atoms. As far as structural symmetries are concerned, all these materials possess inversion symmetry about the center of the hexagon as opposed to the parent CN which had both reflection and inversion present. The C/N atoms in the CN monolayer have sp hybridization similar to the atoms in graphene whereas in our case all the X(adatoms)/N atoms in the DB CNX monolayers find their ground state in sp hybridization, resembling the likes of diamond structure. Magnetic calculations also reveal the non-magnetic ground state of these dumbbells. The bond lengths of these systems are also very different from what monolayer CN and graphene possess. All the relaxed optimized lattice constants, bond lengths between different atoms, buckling length and the corresponding cohesive energies of the semi-metallic dumbbell structures have been shown in our previous work [45]. The negative signs and relatively comparable energy values with the synthesized CN monolayer depict decent energetic stability and feasibility of these materials. The recent experimental realization of dumbbell (DB) silicene on Ag surface [42] added to the stably grown DB phases of germanene on Pt and Au surfaces [39], this newer 2D morphology is attracting peers in the research community. All these dumbbell geometries including the DB stanene [50] are found to be energetically much more favorable than their low-buckled formations. Incorporating the hexagonal boron nitride (hBN) as a suitable substrate [51], structures like these exhibit strong traces of Quantum anomalous hall effect. All these DB structures are found to be formed without any energy barrier once Si, Ge and Sn adatoms are placed on silicene, germanene or stanene [40, 52] which speaks volumes about their synthetic plausibility. So to project the high synthetic feasibility of this family DB CNX (X = C, Si, Ge) we have first computed the formation energy of viz. the DB CN monolayers using the relation:
where , and are the energies corresponding to the DB CN, CN and the supplied carbon atoms whereas ‘n’ is the number of atoms adsorbed. This is highly dependent on the form of supplied carbon resources. Using graphene as the carbon resource, the positive formation energy for DB CN comes out to be about 4.81 eV/carbon atom. This value resembles the energetics of depositing C atoms in graphitic CN [53]. It is to note that, the carbon self-doped g-CN has been achieved experimentally, which can enhance the proportion of C and N atoms [54, 55]. Also using single C atoms as the carbon resource, the formation energy of the DB CN turns out to be 3.45/carbon atom. This is of the same order of magnitude as the adsorbed C atoms on graphene. The carbon atoms and their atomic chains are already been experimentally realized on the graphene surface using the transmission electron microscope (TEM) in ambient conditions [56, 57]. Even though the synthetic route of the substitution pattern is quite different from that of the adsorption, we expect that the group-IV elements like C, Si etc. can be adsorbed on graphene-like CN forming DB CN, DB CNSi etc. since under adatom-rich environment, it’s almost barrierless as these earth abundant sources are supplied [53, 58]. To properly establish the aspects of both dynamical and thermal stability, as a representative of this family of systems, we have added the phonon dispersion curves and the ab-initio molecular dynamics for DB CN and CNGe here respectively. In Fig. 2(a,b) the absence of any negative vibrational mode defines the dynamical stability of these materials. The variation of total energy with time in Fig. 2(c,d) depicts thermal stability for these structures while exposed to a 500 K heat bath for 2000 fs without any bond breakage. The synthesis of any film, regardless of the dimensionality, typically requires a substrate. Proper growth of these CN-based dumbbells can be catered by the widely known approach which is to form a vdW heterostructure. The hBN sheets possess a large bandgap and higher dielectric constant which enabled it as a worthy substrate to grow graphene and other 2D materials [51]. Forming a vertical heterojunction with graphene-like CN and hexagonal BN [59] and depositing additional C, Si atoms on the surface can lead to the formation of DB CNX on hBN. For example, a unit cell of DB CNX (‘Si’ here) can be placed between two 2×2 hBN - forming a vdW heterostructure with a low lattice mismatch of only 1%. Figure-S1 in the supplementary material reveals the fully relaxed trilayer encapsulation of DB CNSi with boron nitride (BN), accompanied by its associated band structure. Remarkably, the Dirac cone characteristic of free-standing DB CNSi is preserved around the Fermi energy when encapsulated in BN, owing to the retention of inversion symmetry.
Therefore, when DB CNX is sandwiched between hBN layers, it showcases a topologically non-trivial gap induced by spin-orbit coupling. This strikingly contrasts with the scenario where DB CNX rests on a single BN layer, which results in a 60 meV bandgap around the Fermi level due to the broken inversion symmetry, as depicted in Figure S2.
From an experimental point of view, modulation via strain is also quite important for the fabrication of such 2D monolayers. In our earlier work [45], we have performed both the structural modification and band tuning through the uni- and bi-axial strains. In both cases, the Dirac points are robust up to about (2-4)% strain value above which they get opened up to bandgaps of meV order around the high symmetry ‘K’ point. As per reports, one-third-hydrogenated graphene (CH) single-crystal is synthesized experimentally on Ru (0001) surface by Chen et al. [60] where the Dirac point is preserved. So a similar hydrogenation of these reported dumbbell carbon nitrides on proposed substrates like Ag or hBN can be fruitful. So when these monolayers are grown on the substrates proposed above, the usual lattice constant dissimilarities can’t affect their electronic nature easily. Electronically, dumbbells formed by the group-IV elements (C, Si and Ge) portray the presence of Dirac cones at the high-symmetry point ‘K’ as shown in Fig. 3(a,b,c). This emergence of Dirac cone is obvious due to the simultaneous existence of both spatial inversion and time-reversal symmetry [61]. As opposed to single-layer carbon-nitride systems like g-CN [26] and CN, these three DB CNX structures have the Dirac-like crossing exactly at the Fermi level, analogous to holey CN monolayers like CN, CN etc [62] which is better for experiments and applications. Although the X/N atoms are sp hybridized, these dumbbells do not mix up other orbitals. Instead, near the Fermi energy level, only the p orbitals of the adatoms seem to be responsible for the formation of the Dirac cones. This feature is quite enthralling since other Dirac semimetals like monolayer phosphorene p orbitals of 8 atoms out of the 20 carbon atoms in the unit cell contribute in the Dirac-cone formation [63]. The atom-resolved projected density-of-states distinctively shows this feature in Fig. 3(d,e,f). This also indicates that if we eliminate all the other insignificant atoms and keep only the contributing adatoms - that low-energy structure should surely reproduce the Dirac cone at the Fermi energy level. A detailed analysis of the structure and the electronic nature of this family of materials has been done in our earlier work [45].
Figure 2. Phonon dispersion curve and ab-initio molecular dynamics (AIMD) plot for semi-metallic dumbbell CN and CNGe. Here figures (a) and (c) show the phonon dispersion and the AIMD plot for DB CN whereas figures (b) and (d) are for DB CNGe. The AIMD plots for these materials are examined and found in the canonical ensemble (NVT) while exposed to a 500 K and 300 K heat bath respectively for 2000 fs (with a time step of 1 fs) without any structural breakage.
Topological phase transition in CNX sheet
Delving into the intricacies of these systems, we present the tight-binding model Hamiltonian tailored explicitly for the effective low-energy lattice version of the CNX systems. We note that our low-energy lattice model, built upon the consideration of effective hopping between the adatoms of dumbbell-like structures, is well-equipped to explore the essential physics of the systems near the Fermi level. This is because of the predominant contribution of the adatom orbitals near the Fermi level of all the systems considered in this work. Despite the shared essence of their fundamental geometric attributes, these lattices differ in some essential parameters, such as bond lengths (), hopping integrals (), and lattice parameters (). Besides, the SOC strength () and buckling height () between adjacent ‘X’ atomic sites depend sensitively on the atomic number of constituent elements, exhibiting quantitatively distinct characteristics across different systems. The presence of substantial buckling in the system allows a transverse electric field () to impart different mass terms (Semenoff-like) [32, 64] to the neighboring atoms of the effective low-energy structure. The Semenoff mass essentially results in the breakdown of inversion symmetry within the system, leading to the emergence of non-zero Berry curvature even in the presence of time-reversal symmetry. The generalized TB Hamiltonian [65] for our effective buckled honeycomb lattices, subject to an external transverse electric field, can be expressed as:
In the presented theoretical framework, the symbols and denote the processes of electron hopping between sites and within a lattice structure, encompassing interactions with nearest and next-nearest neighbors. The spin degrees of freedom, denoted by the symbol , manifest as either (+1) or (−1), representing the intrinsic spin states. Additionally, the system incorporates the influence of SOC and staggered sublattice potential denoted by (taking values of ±1) and (with values of ±1) respectively. These parameters explicitly hinge upon the direction (clockwise or anticlockwise) of the hopping process and the specific sublattice involved. It is essential to mention that the tight-binding parameters governing Eq. ?? exhibit variations across diverse systems under consideration. Table 1 provides a comparison of these parameters for the dumbbell-like structures in relation to Xenes (X = C, Si, Ge, and Sn). Notably, the negligible spin-orbit coupling and planar geometry of graphene preclude the manifestation of an electrically tunable quantum spin Hall state in this system. On the contrary, all of these dumbbell-like structures are buckled and exhibit a band gap in the unperturbed case. Moreover, it is worth noting that the buckling heights of these dumbbell-like structures are significantly large compared to any of the Xenes (X = C, Si, Ge, Sn). Therefore, the Hamiltonian equation (Eq. ??) elucidates the advantage of modulating band gaps by external electric field modulation of these dumbbell-like structures. The physics in the vicinity of the Fermi energy is aptly characterized by the Dirac theory, a framework analo-
| Systems | (Å) | (eV) | (meV) | (Å) |
| DB CN | 4.76 | 2.8 | 2.01 | |
| DB CNSi | 4.89 | 0.21 | 3.9 | 3.28 |
| DB CNGe | 4.90 | 0.232 | 43 | 3.62 |
| Graphene | 2.46 | 2.8 | 0.00 | |
| Silicene | 3.86 | 1.6 | 3.9 | 0.23 |
| Germanene | 4.02 | 1.3 | 43 | 0.33 |
| Stanene | 4.70 | 1.3 | 100 | 0.40 |
Table 1. The structural and tight binding model parameters for dumbbell-like structures are systematically compared with those of graphene, silicene, germanene, and stanene. In this analysis, the symbols , , , and represent fundamental properties such as the lattice parameter, hopping integral between adjacent atoms, intrinsic spin-orbit coupling, and buckling heights, respectively.

Figure 3. Electronic structure of the family of semi-metallic dumbbell CNX system. Here figure (a), (b) and (c) shows the existence of the Dirac cone in all three DB CN, CNSi and CNGe at high symmetry ‘K’ point. Figure-(d,e,f) shows the atom- (and corresponding orbital) resolved density of states for all three dumbbell formations respectively.
gous to that applied in graphene. The presence of electric field () modifies the electronic band dispersion of the buckled dumbbell-like structures by the relation
where represents valley index for and points. In the absence of any external electric field, the buckled dumbbell-like structures inherently possess a SOC-induced band gap, , as also obtained from our first-principles methods. The given expression of band gap indicates a decreasing SOC-induced band gap with electric field strength until it reaches zero, followed by the emergence of a linearly varying band gap with increasing electric field as depicted in Figure 4. In Figure 4, the particular example of CNSi exhibits characteristics of a QSH insulator in the unperturbed phase with a SOC-induced band gap of 7.8 meV. However, the application of an external electric field induces a reduction in the band gap, eventually leading to its closure at the critical electric field value of 0.0012 V/Å. Beyond these critical points, a transformative shift transpires, causing CN\textit{Berry}Si to exhibit properties of a normal insulator. The band gap in the normal insulating case increases linearly with the external electric field, as discussed earlier. Here we note that, all three materials (CNX) are isostructural, differing only in the type of X atom (X = C, Si, Ge). The intrinsic electronic behavior of these systems is essentially similar, with primary differences in the vertical separation between neighboring X atoms and the SOC-induced band gap. Table 1 of our manuscript compares these properties. The strength of SOC () is responsible for the band gap opening in the unperturbed state, rendering these systems topologically nontrivial. Conversely, the vertical distance separation () between neighboring X atoms induces an on-site potential difference in the presence of a transverse electric field, which tends to make the systems trivial.

Figure 4. The electrical tunability of the band gap and the indication of a possible topological phase transition in CNX systems (in this case, X=Si) is done through the TB model. The band gap exhibits a linear variation with the electric field, decreasing before reaching a critical value. Beyond this value, the band gap increases. At the critical electric field strength, the system behaves as a semimetal with zero band gap value.
The competition between these two parameters drives the topological phase transition around a critical electric field strength of . Therefore, from this discussion, it is evident that systems with stronger SOC require a stronger electric field to induce the topological phase transition, while a larger vertical separation reduces the critical field value. In order to corroborate the field driven topological phase transition in CNX systems we have performed DFT calculations. It is evident from Figure 5 that the band gap at the point initially decreases with the application of an external transverse electric field, inducing a topological phase transition, and subsequently increases, forming a trivial band gap. Therefore, the above discussion presents a procedure for the controlled manipulation of the electronic properties of the CNX systems through electrical means. Moreover, the modulation of the band gap suggests the potential for an exciting interplay among external electric fields, electronic band structures, and the topological phases across all CNX systems. To properly illustrate the nature of distinct band gap opened phases, i.e., before and after the gap closing value of the electric field strength, we have calculated the Berry curvature () distribution [66, 67, 68] on the electronic bands near both the valleys and using Kubo formalism [69] a given below.
Figure 5. Variation of band gap of DB CNGe system with transverse electric field. Here (a) E < E, (b) E ≈ E, and (c) E > E is computed using DFT. The band gap first decreases with the electric field which causes a topological phase transition and then increases again to a normal insulating phase.
We note that, in two-dimensional crystals only the out-of-plane component of Berry curvature () is non-zero. The eigenenergies of the Hamiltonian , denoted as and , correspond to the eigenstates and , respectively. It is noteworthy that the Berry curvature of systems exhibiting time-reversal invariance possesses an intrinsic odd symmetry with respect to momentum. This is expressed as , where denotes the time-reversal operator. Moreover, Berry curvature plot in Figure 6 reveals a clear band inversion around the critical electric field strength V/Å for CNGe system. This band inversion indicates the topological phase transition in the CNGe system about the critical electric field 0.012 V/Å. It is noteworthy that the same underlying physics manifests in the CNSi system, where the semimetallic phase is achieved at a critical electric field strength of 0.0012 V/Å about which system undergoes a topological phase transition. To establish the presence of distinct topological phases in CNX systems more strongly, we have calculated the invariant using Wannier charge centers (WCC) [70, 71].
Figure 6. Berry curvature distribution across four spin bands near the Fermi level under varying electric fields in CNGe which is computed via realistic tight-binding method. Panels (a) and (b) illustrate this near , with field strengths of 0.01 V/Å (nontrivial phase) and 0.02 V/Å (trivial phase). Panels (c) and (d) show effects around for the same field strengths. Electric fields cause spin degeneracy splitting, and inversion of Berry curvature in two bands signifies the topological phase transition from quantum spin Hall (QSH) to normal insulating (NI) phase. The color scale indicates Berry curvature magnitude and sign, with as the sole non-zero component in 2D.
In particular, we have calculated Berry phases around the BZ in the direction, which can be interpreted as the 1D hybrid Wannier centers in the x-direction and plot results as a function of . The formulation of the invariant from the WCC, introduced by Fu and Kane [72], expresses the invariant as an obstruction of the Berry phase gauge field within half of the BZ. This method offers convenience because it resembles bles the Chern number formula for quantum Hall states, as established by Thouless et al. [73]. Later, Yu et al. [70] offered an alternative proof demonstrating the relationship between the Wilson loop approach and the invariant via the obstruction formula. The occupied Bloch bands can be written down using the gauge choice . It is needless to mention that the operator represents an anti-symmetric matrix. Using the gauge choice mentioned above, the invariant for any time reversal invariant Hamiltonian can be expressed as follows:
In the Eq. 4, is the Wilson loop which can be determined form part of the Berry connection () as . Here, we note that the wave functions in the lower half of the BZ, defined by , can essentially be determined by those in the upper half of the BZ, denoted by . Considering wavefunctions to be continuous and well defined in , it is evident from Eq. 4 that the invariant is either 0 or any other arbitrary integer. For a particular gauge choice [70], one can write,
Considering and within we can write
where serves as the winding number. In principle, winding number in this case corresponds to the number of times crosses the horizontal line of Wannier charge center plot in the half BZ. The above discussion leads us to derive a simple definition of the Z index, ie., . In Figure 7(a), it is evident that a linear trajectory parallel to intersects the WCC of CNGe an odd number of times in half of the Brillouin Zone under an electric field value 0.01 V/Å, which is below the critical field. This odd number of intersections essentially establishes the nontrivial insulating behaviour with the topological index Z = 1. On the contrary, under a 0.02 V/Å electric field (above the critical field), the same trajectory exhibits an even number of intersections showing the trivial topological index Z = 0, as depicted in Figure 7(b). The Z invariant conclusively establishes that the applied external electric field induces a topological phase transition in CNGe, from a non-trivial to a trivial one. Similar outcomes have been observed in other structures like dumbbell CNSi. However, due to the significantly low strength of the SOC in the CN system, the emergence of the quantum spin Hall state is suppressed. In order to corroborate the electric field-driven topological phase in the two dimensional DB CNX systems, we have further calculated the topological edge states in the armchair nanoribbon geometry with 20 hexagonal plaquettes along the non-periodic direction. We note that, the bulk-boundary correspondence is a key principle in topological insulators, linking bulk properties with edge or surface states. A non-trivial bulk topological invariant Z essentially ensures the presence of robust, gapless states at the boundaries. These states are protected by the non-trivial bulk topological index Z=1, making them immune to local perturbations that do not close the bulk energy gap and cause a topological phase transition. In the present case of two-dimensional topological insulators, the insulating bulk (non-trivial phase) hosts helical edge states where electron spin is locked to the direction of motion. This results in robust conduction channels resistant to backscattering and non-magnetic impurities that preserve time-reversal symmetry [74, 75, 76]. In order to further support the topological insulating properties of pristine CNX, we have provided the topologically protected edge states, given in Figure 8(a) corresponding to the nontrivial topological invariant Z=1 for the 2D sheet. Furthermore, we have demonstrated that these conducting edge states vanish beyond the critical value of the inversion symmetry-breaking perpendicular electric field [see, Figure 8(b)], at which point the bulk topological invariant becomes Z = 0.
Figure 7. Wannier charge centers in nontrivial and trivial phases. The Wannier charge centers (WCCs) are depicted for DB CNGe under distinct electric field strengths: (a) 0.01 V/Å (representing the nontrivial phase) and (b) 0.02 V/Å (indicating the trivial phase), evaluated through a realistic tight-binding method. In the former case, a single line parallel to axis intersects an odd quantity of charge centers within half of the Brillouin Zone (BZ), resulting in an odd invariant. This odd value substantiates the nontrivial topological nature of the material. Conversely, in the latter case, the WCC profile indicates an even number of intersection points, signifying an even invariant and confirming the trivial phase.
Figure 8. The band structure of the armchair edge nanoribbon formed by the X (= Ge) atoms is computed using realistic tight binding method. (a) In the absence of an electric field, the CNGe nanoribbon exhibits protected metallic edge states, which corresponds to the bulk topological invariant . (b) In the presence of a perpendicular electric field beyond the critical value (here, the mass term = 0.3 eV), the bulk topological invariant becomes trivial , and consequently, there are no edge states. Therefore, these two phases are topologically distinct. Here, 20 hexagonal plaquettes are considered along the non-periodic direction.
CNX nanoribbon
In this section, we shall investigate the electronic characteristics of the DB CNX nanoribbon and particularly focus on the potential for facilitating topological phase transitions even in the CN structure. We start from the demonstration of the quasi one-dimensional version of the original network. The Figure 9(a,Figure 9b) here depicts the fully relaxed hydrogen-passivated quasi-1D formation of DB CNX which is basically a block of its infinite one-dimensional network with the lattice periodicity only along crystallographic -axis of the original sheet depicted in Fig. 1(d). As we can see from the Figure 9 that the edge type of the nanoribbon is zigzag and it has the width of a single hexagonal plaquette and the edges are terminated by hydrogen atoms in order to ensure the stability. As an example, the dynamical and thermal stability is checked and established for quasi-1D DB CNX systems and given for X=Si in Figure-S2 of the supplementary material. Therefore, the unit cell of the nanoribbons consists of C, N, X and H atoms, however, the projected density of states calculation using density functional theory reveals that the states near the Fermi level are solely contributed by the p orbital of X atom. The ribbon can be demonstrated by the standard tight-binding Hamiltonian, written in the Wannier basis for the spinless non-interacting fermions, viz.,
Figure 9. Top and tilted side view of the relaxed edge-passivated quasi-1D or nanoribbon form of DB C₃NX structure. The red, yellow, grey and white atoms represent carbon (C), nitrogen (N), adatoms (X = C, Si, Ge) and hydrogen (H) respectively. This is a 6×1×1 unit of the periodic one-dimensional chain of these concerned systems.
The off-diagonal term is the overlap integral between the nearest neighboring nodes that carries the kinetic signature and the diagonal term describes the potential information of the respective atomic site location. There are three different kinds of atomic sites. Depending on the local environment we may assign different potential for different quantum dot locations. However, the PDOS and band spectra of the systems indicate that we can examine the spectral landscape provided by the ribbon geometry by considering uniform on-site energies of every kind of atomic site. The cost we need to pay is a shift of Fermi energy compared to the charge neutrality of the model because of the presence of nitrogen in the systems. For further numerical evaluation, we set = 0 for all the nodes. We will try to evaluate the spectral information by the real space decimation scheme [34]. It is needless to say that the decimation scheme is no longer dependent on the choice of numerical values of the parameters of the Hamiltonian. Now, the discretized form of the Schrödinger’s equation (equivalently termed as difference equation) can be written as
The summation on the right-hand side of the above equation includes the contribution of all the nearest neighbor atomic sites. The longer wavelength fluctuation is not considered here. To acquire an idea about the general spectral feature we will exploit Eq. (6) and try to obtain an analytical overview of the band diagram. As the underlying lattice has translational invariance one should expect the obvious existence of Bloch states in the band dispersion. For any such resonant mode, the system becomes completely transparent to the incoming excitation. By exploiting the real space decimation formalism, we can eliminate the wave function amplitudes of an appropriate subset of atomic sites in terms of the other surviving nodes. This transformed structure with the corresponding effective parameters of the Hamiltonian will now be useful for the numerical evaluation of the density of eigenstates (DOS) and the electronic transmission probability as a function of the energy of the incoming projectile for the entire ribbon. Here we should mention that the decimation scheme, mentioned above, is nothing but a mathematical artifact and the original network remains intact. Therefore, the analytical workout does not have the chance of destroying the overall spectral nature and hence we will not lose any serious information, physics-wise. The decimation scheme is pictorially represented in Figure 10. The lower panel denotes the effectively transformed structure with the corresponding parameters. If we choose , , and respectively as the on-site terms for the carbon, nitrogen and silicon atoms and the hopping terms , and , then in terms of these original parameters, the effective parameters can be described as follows,
Figure 10. Nanoribbon and its decimated geometry with corresponding on-site potential energies and hopping parameters. A portion of an infinitely long ribbon geometry (figure-a) and the decimated effective picture of the ribbon (figure-b). Brown, yellow and violet colored balls represent in-plane carbon, buckled nitrogen and the adatoms respectively. The dotted lines in fig-(a) stand for the out-of-plane bonds of these DB CNX systems.
These renormalized parameters constitute the effective version of the original ribbon. The new parameters are indicated clearly in the diagram (Figure 10). It is needless to mention that the scheme involving Eq. (7) is not at all sensitive on the numerical values of the kinetic and potential parameters of the Hamiltonian. This transformed structure remains intact in respect of its periodicity.
Spectral information
Before going to the band dispersion and other associated ideas, we proceed to acquire an overall idea of the eigenspectrum that describes the entire landscape of allowed eigenmodes as a function of the energy of the injected projectile. The above effective parameters (Eq. (7)) will help us to compute the electronic density of states with the help of the standard Green’s function technique. One can easily write down the Hamiltonian matrix in real space language for a large enough system size to calculate the Green’s function. It is well-known that the numerical evaluation of average DOS is governed by the following relation, viz.,
Where is the usual Green’s function and is the negligibly small imaginary damping part added to the energy for the numerical calculation of DOS. denotes the system size and ‘Tr’ is the trace of the Green’s function. Throughout the numerical analysis, we have set the on-site energy of every kind of site as, . This evaluation will give us knowledge about the entire eigenspectrum, the allowed bulk states offered by the ribbon structure and their nature too. Nevertheless, as previously outlined, our emphasis will be directed towards analyzing the eigenspectrum of these nanoribbons, with particular attention given to the specific electron-doped regions, owing to the incorporation of N atoms. The intricate variation of DOS with respect to the energy is presented in the Figure 11. Here we have taken the system size . The portrait of DOS with energy, as shown in the Figure 11, reveals the formation of absolutely continuous subbands densely populated by extended type of eigenfunctions, as ex-
Figure 11. The variation of density of states with the energy of the incoming projectile. Here on-site potential of every kind of sites are uniformly set as zero and the hopping parameters are , and .
pected. There are three such continuum zones present in the DOS plot. We are particularly interested in regions far from charge neutrality that reside within the conduction band of the eigenspectrum obtained from our model. The DOS in the energy region mentioned above serves as the actual DOS of the nanoribbon near the Fermi level because of the artifact of considering uniform on-site energy. The centro-symmetric pattern is constituted by the transparent modes for which the flow of the hopping parameter shows an oscillatory behavior. In other words, extensive numerical search reveals that for any of the energy belonging to the continuum zone, the non-vanishing overlap integral demands the non-zero overlap of the wave functions between the consecutive nodes for such modes. This confirms the resonant character of the corresponding states. This existence of such Bloch state with high transmittivity is particularly appreciable due to the translational ordering present in the underlying system. Before ending this demonstration, we should highlight that a central spiky state is observed at . This may associate non-dispersive nature; but since the state lies in between the continuum zone of diffusive modes, it will loose its in-built localization character. The reason is self-explanatory.
Transport characteristics
To validate our findings we will now do parametric calculation to explain the transmission behavior of the ribbon-shaped quasi-one dimensional structure with the aid of the usual method of multi-channel transport. For this estimation, we need to clamp the system within a pair of semi-infinite periodic leads. To obtain the transmittance, here we now embrace the standard Green’s function approach. The graphical variation of the transmission probability is depicted in the Figure 12. From this pattern it is clear that there are three identical resonant zones which are essentially compatible with the DOS plot. For the modes residing over the continuum zones, it shows resonating transport and this confirms the diffusive character. The total number of sites taken for this numerical evaluation is . The parameters of the Hamiltonian are necessarily set as identical with that considered in the calculation of DOS. The on-site energy of the atomic sites of the semi-infinite leads is set as zero and the hopping is put as to obtain the full band picture. Also, the system to lead coupling is taken as identical with to minimize the scattering probability at the connectors. For the central spiky mode, there is a drastic drop of transmittance due to the relatively low localization length of the state. The ballistic transmission of the states of the other two zones (left and
Figure 12. The variation of transmission probability with respect to the energy of the incoming excitation. Here the on-site potential of every kind of sites are uniformly set at zero and the hopping parameters are , and .
right) is evident from the diagram. The conducting nature of those modes automatically validates the expected diffusive flavor of the Bloch states. Similar to the previous section, the Fermi level of the original system lies at the conduction band, and the corresponding transmittance of the system will only be observed in practice.
Topological phase transition
As we discussed earlier, the low-energy physics of these quasi-one-dimensional DB CNX systems can be effectively represented by considering an effective network comprised of "X" atoms [Fig. 13]. This effective system bears a resemblance to a one-dimensional chain of atoms with two sub-lattices per unit cell. However, a careful examination unveils a uniformity in the bond lengths of "X" atoms, both within intra- and inter-unit cell connections. This additional symmetry implies that the original system can be essentially mapped onto a uniform chain of atoms, where the lattice periodicity constitutes half of the initial lattice parameter. In other words, the uniform one-dimensional lattice geometry reveals that the electronic spectra will invariably exhibit a gap-closed phase unbiased by the specific type of "X" atoms as shown in Figure 13(b). The above discussion can be excellently supported by the DOS spectra and transmission probability of the CNX ribbon as discussed in the previous section, which is identical to that of the one-dimensional chain of atoms. Motivated by the structural intricacies of the original lattice geometry and corresponding symmetry, we try to induce a band gap in the system. In particular, we have realized that the gap-closed phase as mentioned above is similar to the critical phase of the SSH model [77, 78, 79, 27, 80]. The experimental quantum simulation of this model and realization of localized topological soliton state through quenched dynamics, phase-sensitive injection, and adiabatic preparation is already reported [81]. Therefore, we can essentially break the symmetry of the intra- and inter-unit cell bond lengths to essentially form a two level system. For example, in the case of CNSi, the Si atoms undergo a shift of 1.91 Å and 2.29 Å compared to the unperturbed case, for tensile and compressive type strain, respectively, as illustrated in Figure 13.

Figure 13. Nanoribbon form of dumbbell C₃NSi with different types of twists and their corresponding electronic nature. The optimization of these edge-passivated ribbons and the subsequent band structures are found using DFT. The dotted lines in all three figures show the relaxed position of the adatoms. Here figures (a) and (c) show the formation and the band structure of the ribbon under in-phase inward (where the adatoms move close to each other) and outward (move far apart) strain whereas figure-(b) depicts the structure and the electronic nature of the pristine nanoribbon. The critical phase is gapless while other twisted phases are gaped with distinct topological properties.
As we have discussed earlier, only orbitals of the X atoms contribute in forming the states near the Fermi level. Therefore, we have mapped this quasi-1D lattice problem to an effective low-energy model composed exclusively of X atoms, which accurately reproduces the band structure near the Fermi level. It is needless to mention that in this case the system behaves as a two-level system with lattice periodicity characterized by the Hamiltonian
In the above eq. 9, the hopping parameters and represent the intra- and inter-unit cell hopping. The above Hamiltonian gives rise to the bulk dispersion relation in terms of energy eigenvalues.
Similarly, the eigenstates, or eigenvectors, exhibit the following form:
In the critical phase, two hopping parameters and become equal, and we obtain a gapless phase similar to the zone-folded uniform chain of atoms. On the other hand, different hopping entropy () opens a gap in the system that belongs to different topological phases. For example, Figure 14 illustrates that both and open a band gap; however, the orbital exchange in the latter case establishes the nontrivial topological phase with winding number . In Figure 14, we have considered two representative hopping parameters 1 and to explain the distinct topological nature of two gap opened phase and . It is not to mention the physics of a particular phase remain unaltered as long as the corresponding hopping relation is protected. A very recent report on the dumbbell graphene proves the similar adjusting of the atomic positions of adatoms which can tune the topological property of the system [82].

Figure 14. Illustration of topological characteristics in C3NX dumbbell configurations, governed by the Su-Schrieffer-Heeger model. The 1D band dispersion of a two-band Hamiltonian with atoms () and contribution is displayed. (a) Stronger inter-unit cell atom hopping results in a trivial insulator band gap (, ). (b) Equal contributions lead to a semi-metallic band dispersion (). (c) Stronger intra-unit cell hopping induces another gap-opened phase (, ), highlighting orbital exchange during the topological phase transition. All these evaluations are done using the realistic tight-binding method.
Motivated by this observation, we have applied a shearing strain to the system, inducing a tilt in the dumbbells formed by the atoms within the nanoribbon structure. We observed that two different types of shearing strain: (i) causing two atoms of a unit cell to come closer to each other, and (ii) causing two atoms of a unit cell to move farther apart from each other, result in gap opened phases but of differing topological natures. Under the application of strain, these geometries are the ground state and the corresponding band structures are obtained using DFT. However, addressing this issue, we have further explored the possibility of obtaining distinct topological phases in the DB nanoribbon without any strain engineering. We note that in the DB nanoribbon, the dumbbells are formed on the top of each N atom. It is extremely interesting that if the concentration of the dumbbells are reduced to its half in two distinct ways given in Figure 15(a) and (b) we obtain two district topological phases in the normal ground state, i.e., without any external perturbation. The emergence of these distinct non-trivial phases can be properly explained in terms of the SSH model. The above statement is underpinned by the fact that only the -atoms predominantly contribute near the Fermi level. Therefore, in a low-energy depiction this ribbon is identical to a SSH chain consists of two atoms per unit cell placed on the top of each N atom. The band structure of this unperturbed nanoribbon is semimetallic with a zero band gap, as shown in Figure 15(c) (middle panel). Now, we have reduced the concentration of the atoms forming the dumbbell in the ribbon geometry. The above strategy can be attained by constructed a supercell, which consists of four atoms on the top of four N atoms. First, we remove two of the four atoms located at the edge of the unit cell, ensuring that the atoms at the center of the unit cell remain intact. Therefore, we realize that the distance (d) between the intracell atoms is very less compared to that of the intercell atoms [Fig. 15(a)]. As a consequence, the hopping parameter between the intracell atoms () is stronger compared to that of the intercell one () of the SSH chain Figure 16(a). On the other hand, removing two central atoms inside the unit cell leads to the structure given in Figure 15(b), where the inter-unit cell bond length (hopping) is less (stronger) than that of the intra-unit cell one. We have computed the DFT band structure of these two systems given in Figure 15(c)

Figure 15. Nanoribbon form of dumbbell CNSi and their fully dimerized limits with the subsequent electronic nature. The top (upper panel) and side (lower panel) views of DB CNX nanoribbons with fully relaxed geometries, illustrating (a) the absence of X atoms near the edge of the unit cell and (b) the absence of X atoms at the center of the unit cell. Additionally, (c) presents the DFT band structure: the left panel corresponds to the ribbon in subfigure (a), the middle panel shows the original ribbon without removed X atoms, and the right panel corresponds to the ribbon in subfigure (b). The left and right panels exhibit gapped phases with distinct topological signatures.

Figure 16. Schematic representation of the low-energy DB CNSi as a quasi-1D network of ‘Si’ with staggered inter- and intra-unit cell hopping (w and v) and the evolution of band structure with underlying winding number. Figure-(a) shows the schematic of the SSH chain made of the X atoms (X =Si, here), (b) shows the band structure of this SSH chain depending on the different values of the intra-cell (w) and inter-cell (v) hopping parameter and (c) displays the winding number for different conditions reveals that v < w is always topologically trivial whereas v > w are topologically nontrivial.
(left panel) and (right panel). It is evident that the band structure near the Fermi energy will be identical to the band dispersion of the SSH chain given in eq. (10). Therefore, there will be always a gap in the band structure unless , given in Figure 16(b). Now, we see when the is negligible compared to (similar, ) or is negligible compared to (similar, ) the coefficient of vanishes and we obtain a flat band. However, the calculated winding number illustrated in Figure 16(c) reveal that condition is topologically trivial whereas the condition is topologically nontrivial. It is needless to mention that the flat bands near the Flat band, shown in Figure 15(c) can be explained using the above discussion. Furthermore, the Figure 15(c) (left panel) is topologically trivial whereas the Figure 15(c) (right panel) is topologically nontrivial.
Moreover, in order to support the above statement, we have performed calculation of the system under open boundary condition. We have observed that the edge states are present in the open boundary condition for , including case [Fig. 17(a)]. Two different types of edges under open boundary condition are illustrated in Figure 17(b). The absence and presence of zero energy modes for and , respectively, as given in Figure 17(c) and Figure 17(d) critically establishes

Figure 17. Appearance of zero-energy states with its underlying energy spectrum. Figure-(a) shows the zero energy edge state of the nanoribbon (manifesting the SSH chain) under the open boundary condition for . Figure-(b) depicts the schematic representation of the SSH chain for the condition and and (c) shows the absence of the zero energy edge state for the . Figure-(d) displays the presence of zero energy edge states for the case. The plots are obtained for the X atoms with 100 lattice sites.
the topologically trivial and nontrivial phase for and , respectively. Therefore, the above discussion reveals that the nanoribbon shown in Figure 15(a) is topologically trivial, whereas the nanoribbon shown in Figure 15(b) is topologically nontrivial in its pristine form. From the above discussion, we note that the SSH chain, characterized by alternating strong and weak bonds, serves as a paradigmatic model for understanding topological phases. This model has been naturally observed in the polyacetylene polymer chain. In this context, the uniform chain of carbon atoms spontaneously adopts one of the possible ground states with alternating bond lengths, which can be either topologically trivial or topologically non-trivial. In the case of the DB NX system, we have explored a compelling depiction that mimics similar SSH physics in the low-energy spectrum. This has been critically established using the projected density of states near the Fermi level and the signature of band inversion subjected to systematic lattice distortion. The effective low-energy lattice of the DB NX nanoribbons consists of two X atoms and is essentially underpinned by the same arguments introduced for the paradigmatic SSH chain. Furthermore, the low-energy version of the original lattice can be achieved under the influence of strain engineering on the original nanoribbon, as introduced here.
Conclusion
In summary, we have found compelling non-trivial topological results in the recently proposed stable dumbbell-like hybridized carbon nitride systems namely DB (= C, Si, Ge). The emergence of the Dirac cone around the Fermi energy level is solely due to the presence of adatoms which further led us to construct an effective tight-binding model Hamiltonian that explored low-energy physics around the Fermi level. Comparable spin-orbit interaction strength to Xenes, these systems display a finite gap opening for DB (and Ge) - showing the signs of a quantum spin hall (QSH) insulator. Further presence of a considerable amount of buckling permits us to apply an external transverse electric field that breaks the inversion symmetry. Beyond a critical electric field, these materials depict a sharp topological phase transition. Berry curvature plot on the bands near the Fermi energy level properly explains the closing of this band gap with a clear band inversion around the critical field value. We have made this topological identity more profound by calculating the topological index , which is 1 in this case, using Wannier charge centers (WCC). Next, we have investigated the overall spectral contribution and transport attributes of the DB nanoribbons using the real space decimation technique and the Green function method. Explicit traces of topological phases are found using the famous Su-Schrieffer-Heeger (SSH) model where the in-phase outward motion of the adatoms leads to non-trivial consequences.
Declaration of competing interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
CRediT authorship contribution statement
DM: Conceptualisation, Computations, Formal Analysis, Writing original draft. AB: Conceptualisation, Computations, Formal analysis, Writing original draft. AN: Computations, Formal Analysis, Writing original draft. DJ: Conceptualisation, Supervision, Finalizing manuscript.
Acknowledgements
D.M. sincerely acknowledges the Council of Scientific and Industrial Research (CSIR) India for providing fellowship and his co-authors for constructive discussions. A.B. sincerely thanks the financial support from the Indian Institute of Science IoE postdoctoral fellowship.

Figure 1 (PDF p. 24). Relaxed unit cell of hBN/CNSi/hBN heterostructure and its electronic nature. Here figure (a) shows the optimized construct and (b) shows the electronic structure. The C (brown), N (fade blue), Si (blue) and B (green) are the carbon, nitrogen, silicon and boron atoms respectively.

Figure 2 (PDF p. 24). Relaxed unit cell of CNSi/hBN heterostructure and its electronic nature. Here figure (a) and (b) shows the optimized construct from top and side views and (b) shows the electronic structure and the density-of-states.

Figure 3 (PDF p. 25). Phonon dispersion and molecular dynamics simulation (300 K) curve of DB C₃NSi nanoribbon.
References
- [1]A. K. Geim, K. S. Novoselov, The rise of graphene, Nature materials 6 (3) (2007) 183–191.
- [2]B. Feng, Z. Ding, S. Meng, Y. Yao, X. He, P. Cheng, L. Chen, K. Wu, Evidence of silicene in honeycomb structures of silicon on ag (111), Nano letters 12 (7) (2012) 3507–3511.DOI
- [3]D. Chiappe, E. Scalise, E. Cinquanta, C. Grazianetti, B. van den Broek, M. Fanciulli, M. Houssa, A. Molle, Two-dimensional si nanosheets with local hexagonal structure on a mos2 surface, Advanced Materials 26 (13) (2014) 2096–2101.DOI
- [4]L. Zhang, P. Bampoulis, A. Rudenkо, Q. v. Yao, A. Van Houselt, B. Poelsma, M. K. Kаtsnelson, H. Zandvliet, Structural and electronic properties of germanene on mos 2, Physical Review Letters 116 (25) (2016) 256804.
- [5]F.-f. Zhu, W.-j. Chen, Y. Xu, C.-l. Gao, D.-d. Guan, C.-h. Liu, D. Qian, S.-C. Zhang, J.-f. Jia, Epitaxial growth of two-dimensional stanene, Nature materials 14 (10) (2015) 1020–1025.
- [6]S. Ghosal, A. Bandyopadhyay, S. Chowdhury, D. Jana, A review on transport characteristics and bio-sensing application of silicone, Reports on Progress in Physics 86 (9) (2023) 096502.
- [7]X.-L. Qi, S.-C. Zhang, The quantum spin hall effect and topological insulators, Physics Today 63 (1) (2010) 33–38.
- [8]C. L. Kane, E. J. Mele, Z 2 topological order and the quantum spin hall effect, Physical review letters 95 (14) (2005) 146802.
- [9]M. Ezawa, Topological origin of quasi-flat edge band in phosphorene, New Journal of Physics 16 (11) (2014) 115004.DOI
- [10]C.-C. Liu, H. Jiang, Y. Yao, Low-energy effective hamiltonian involving spin-orbit coupling in silicene and two-dimensional germanium and tin, Physical Review B 84 (19) (2011) 195430.DOI
- [11]S. Y. Zhou, G.-H. Gweon, A. Fedorov, d. First, PN, W. De Heer, D.-H. Lee, F. Guinea, A. Castro Neto, A. Lanzara, Substrate-induced bandgap opening in epitaxial graphene, Nature materials 6 (10) (2007) 770–775.
- [12]P. Nath, S. Chowdhury, D. Sanyal, D. Jana, Ab-initio calculation of electronic and optical properties of nitrogen and boron doped graphene nanosheet, Carbon 73 (2014) 275–282.
- [13]T. Takahashi, K. Sugawara, E. Noguchi, T. Sato, T. Takahashi, Band-gap tuning of monolayer graphene by oxygen adsorption, Carbon 73 (2014) 141–145.
- [14]Y. Yao, F. Ye, X.-L. Qi, S.-C. Zhang, Z. Fang, Spin-orbit gap of graphene: First-principles calculations, Physical Review B 75 (4) (2007) 041401.
- [15]A. G. Rybkin, A. A. Rybkina, M. M. Otrokov, O. Y. Vilkov, I. I. Klimovskikh, A. E. Petukhov, M. V. Filianina, V. Y. Voroshin, I. P. Rusinov, A. Ernst, et al., Magneto-spin–orbit graphene: interplay between exchange and spin–orbit couplings, Nano letters 18 (3) (2018) 1564–1574.DOI
- [16]D. Jana, A. Chakraborti, L.-C. Chen, C. W. Chen, K.-H. Chen, First principles calculations of the optical properties of cxny single walled nanotubes, Nanotechnology 20 (17) (2009) 175701.DOI
- [17]S. Cao, J. Yu, g-c₃n₄-based photocatalysts for hydrogen generation, The journal of physical chemistry letters 5 (12) (2014) 2101–2107.
- [18]F. Li, Y. Qu, M. Zhao, Efficient helium separation of graphitic carbon nitride membrane, Carbon 95 (2015) 51–57.
- [19]Y. Yang, W. Li, H. Zhou, X. Zhang, M. Zhao, Tunable c₂n membrane for high efficient water desalination, Scientific Reports 6 (1) (2016) 29218.DOI
- [20]L. Liu, X. Wu, X. Liu, P. K. Chu, Electronic structure and magnetism in g-c₄n₃ controlled by strain engineering, Applied Physics Letters 106 (13) (2015).DOI
- [21]S. Datta, P. Singh, D. Jana, C. B. Chaudhuri, M. K. Harbola, D. D. Johnson, A. Mookerjee, Exploring the role of electronic structure on photo-catalytic behavior of carbon-nitride polymorphs, Carbon 168 (2020) 125–134.DOI
- [22]S. Debnath, M. Horscheck-Diaz, D. J. Searles, M. Hankel, Carbon nitrides as cathode materials for aluminium ion batteries, Carbon 183 (2021) 546–559.
- [23]H. Bao, L. Wang, G. Li, L. Zhou, Y. Xu, Z. Liu, M. Wu, Carrier engineering of carbon nitride boosts visible-light photocatalytic hydrogen evolution, Carbon 179 (2021) 80–88.
- [24]B. Mortazavi, F. Shojaei, A. V. Shapeev, X. Zhuang, A combined first-principles and machine-learning investigation on the stability, electronic, optical, and mechanical properties of novel c₆n₇-based nanoporous carbon nitrides, Carbon 194 (2022) 230–239.DOI
- [25]M. Fawaz, R. Bahadur, N. P. Dharmarajan, J.-H. Yang, C. Sathish, A. M. Sadanandan, V. Perumalsamy, G. Singh, X. Guan, P. Kumar, et al., Emerging trends of carbon nitrides and their hybrids for photo-/electro-chemical energy applications, Carbon 214 (2023) 118345.DOI
- [26]A. Wang, X. Zhang, M. Zhao, Topological insulator states in a honeycomb lattice of s-triazines, Nanoscale 6 (19) (2014) 11157–11162.DOI
- [27]M. Z. Hasan, C. L. Kane, Colloquium: topological insulators, Reviews of Modern Physics 82 (4) (2010) 3045.
- [28]B. A. Bernevig, Topological insulators and topological superconductors, Princeton university press, 2013.
- [29]W.-P. Su, J. R. Schrieffer, A. J. Heeger, Solitons in polyacetylene, Physical Review Letters 42 (25) (1979) 1698.
- [30]B. Bradlyn, L. Elcoro, J. Cano, M. G. Vergniory, Z. Wang, C. Felser, M. I. Aroyo, B. A. Bernevig, Topological quantum chemistry, Nature 547 (7663) (2017) 298–305.
- [31]Z. Jiao, Q. Yao, H. Zandvliet, Tailoring and probing the quantum states of matter of 2d dirac materials with a buckled honeycomb structure, Physica E: Low-dimensional Systems and Nanostructures 121 (2020) 114113.DOI
- [32]A. Bandyopadhyay, S. Datta, D. Jana, S. Nath, M. M. Uddin, The topology and robustness of two dirac cones in s-graphene: a tight binding approach, Scientific Reports 10 (1) (2020) 2502.DOI
- [33]A. Bandyopadhyay, A. Majumdar, S. Chowdhury, R. Ahuja, D. Jana, 8-16-4 graphyne: Square-lattice two-dimensional nodal line semimetal with a nontrivial topological zak index, Physical Review B 103 (7) (2021) 075137.DOI
- [34]A. Mukherjee, A. Bandyopadhyay, D. Jana, Application of real space decimation method in determining intricate electronic phases of matter: a review, Physical Chemistry Chemical Physics 25 (2023) 9706.DOI
- [35]S. Yang, W. Li, C. Ye, G. Wang, H. Tian, C. Zhu, P. He, G. Ding, X. Xie, Y. Liu, et al., C₃n—a 2d crystalline, hole-free, tunable-narrow-bandgap semiconductor with ferromagnetic properties, Advanced Materials 29 (16) (2017) 1605625.
- [36]B. He, J. Shen, D. Ma, Z. Lu, Z. Yang, Boron-doped c3n monolayer as a promising metal-free oxygen reduction reaction catalyst: a theoretical insight, The Journal of Physical Chemistry C 122 (35) (2018) 20312–20322.DOI
- [37]W. Nong, Y. Li, C. Wang, C3n monolayer with substitutional doping and strain modulation serving as an anode material of lithium-ion batteries, Applied Surface Science 510 (2020) 145324.DOI
- [38]A. Bafekry, M. Yagmourcukardes, M. Shahrokhi, M. Ghergherehchi, Electro-optical properties of monolayer and bilayer boron-doped c3n: tunable electronic structure via strain engineering and electric field, Carbon 168 (2020) 220–229.DOI
- [39]V. O. O-zc-elik, E. Durgun, S. Ciraci, New phases of germanene, The journal of physical chemistry letters 5 (15) (2014) 2694–2699.DOI
- [40]V. O. Ozcelik, D. Kekic, E. Durgun, S. Ciraci, Adsorption of group iv elements on graphene, silicene, germanene, and stanene: Dumbbell formation, The Journal of Physical Chemistry C 119 (1) (2015) 845–853.DOI
- [41]P. Tang, P. Chen, W. Cao, H. Huang, S. Cahangirov, L. Xian, Y. Xu, S.-C. Zhang, W. Duan, A. Rubio, Stable two-dimensional dumbbell stanene: A quantum spin hall insulator, Physical Review B 90 (12) (2014) 121408.DOI
- [42]T. Leoni, C. Hogan, K. Zhang, M. Daher Mansour, R. Bernard, R. Parret, A. Resta, S. Colonna, Y. Borensztein, F. Ronci, et al., Demonstration of the existence of dumbbell silicene: a stable two-dimensional allotrope of silicon, The Journal of Physical Chemistry C 125 (32) (2021) 17906–17917.DOI
- [43]T. Zhang, Z.-Y. Zeng, Y. Cheng, X.-R. Chen, L.-C. Cai, Dumbbell silicene: a strain-induced room temperature quantum spin hall insulator, New Journal of Physics 18 (4) (2016) 043001.DOI
- [44]L. Li, X. Kong, O. Leenaerts, X. Chen, B. Sanyal, F. M. Peeters, Carbon-rich carbon nitride monolayers with dirac cones: Dumbbell c4n, Carbon 118 (2017) 285–290.
- [45]S. Jana, D. Mondal, R. Roy, S. Kanungo, D. Jana, Spontaneous dumbbell formations via surface functionalization of the c₃n monolayer with versatile electronic and mechanical properties, The Journal of Physical Chemistry C 127 (36) (2023) 18001–18014.DOI
- [46]P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. B. Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, N. Colonna, I. Carnimeo, A. D. Corso, S. de Gironcoli, P. Delugas, R. A. D. Jr, A. Ferretti, A. Floris, G. Fratesi, G. Fugallo, R. Gebauer, U. Gerstmann, F. Giustino, T. Gorni, J. Jia, M. Kawamura, H.-Y. Ko, A. Kokaji, E. Küçükbenli, M. Lazzeri, M. Marsili, N. Marzari, F. Mauri, N. L. Nguyen, H.-V. Nguyen, A. O. de-la Roza, L. Paulatto, S. Poncé, D. Rocca, R. Sabatini, B. Santra, M. Schl ipf, A. P. Seitsonen, A. Smogunov, I. Timrov, T. Thonhauser, P. Umari, N. Vast, X. Wu, S. Baroni, Advanced capabilities for materials modelling with quantum espresso, Journal of Physics: Condensed Matter 29 (46) (2017) 465901.DOI
- [47]P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, M. Cococcioni, I. Dabo, A. Dal Corso, S. de Gironcoli, S. Fabris, G. Fratesi, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokaji, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello, L. Paulatto, C. Sbraccia, S. Scandolo, G. Sciauzero, A. P. Seitsonen, A. Smogunov, P. Umari, R. M. Wentzovitch, Quantum espresso: a modular and open-source software project for quantum simulations of materials, Journal of Physics: Condensed Matter 21 (39) (2009) 395502 (19pp).
- [48]D. Vanderbilt, Soft self-consistent pseudopotentials in a generalized eigenvalue formalism, Phys. Rev. B 41 (1990) 7892–7895. doi:10.1103/PhysRevB.41.7892.DOI
- [49]J. Mahmood, E. K. Lee, M. Jung, D. Shin, H.-J. Choi, J.-M. Seo, S.-M. Jung, D. Kim, F. Li, M. S. Lah, et al., Two-dimensional polyaniline (c3n) from carbonized organic single crystals in solid state, Proceedings of the National Academy of Sciences 113 (27) (2016) 7414–7419.DOI
- [50]H. Zhang, J. Zhang, B. Zhao, T. Zhou, Z. Yang, Quantum anomalous hall effect in stable dumbbell stanene, Applied Physics Letters 108 (8) (2016).DOI
- [51]L. Britnell, R. Gorbachev, R. Jalil, B. Belle, F. Schedin, A. Mishchenko, T. Georgiou, M. Katsnelson, L. Eaves, S. Morozov, et al., Field-effect tunneling transistor based on vertical graphene heterostructures, Science 335 (6071) (2012) 947–950.
- [52]V. O. Özçelik, H. H. Gurel, S. Ciraci, Self-healing of vacancy defects in single-layer graphene and silicene, Physical Review B 88 (4) (2013) 045440.DOI
- [53]B. Yang, H. Zhou, X. Zhang, M. Zhao, Electron spin-polarization and band gap engineering in carbon-modified graphitic carbon nitrides, Journal of Materials Chemistry C 3 (41) (2015) 10886–10891.DOI
- [54]G. Dong, K. Zhao, L. Zhang, Carbon self-doping induced high electronic conductivity and photoreactivity of gc 3 n 4, Chemical communications 48 (49) (2012) 6178–6180.
- [55]C.-Y. Wang, K. Maeda, L.-L. Chang, K.-L. Tung, C. Hu, Synthesis and applications of carbon nitride (cnx) family with different carbon to nitrogen ratio, Carbon 188 (2022) 482–491.
- [56]C. Ataca, E. Aktürk, H. Şahin, S. Ciraci, Adsorption of carbon adatoms to graphene and its nanoribbons, Journal of Applied Physics 109 (1) (2011).
- [57]J. C. Meyer, C. O. Girit, M. Crommie, A. Zettl, Imaging and dynamics of light atoms and molecules on graphene, Nature 454 (7202) (2008) 319–322.DOI
- [58]A. Lourenço, N. Wellock, R. Thomas, M. Homer, H. Bouchard, T. Kanai, N. MacDougall, G. Royle, H. Palmans, Theoretical and experimental characterization of novel water-equivalent plastics in clinical high-energy carbon-ion beams, Physics in Medicine and Biology 61 (21) (2016) 7623–7638.
- [59]D. Mondal, S. Ghosal, S. Jana, A. Roy, K. Basak, M. Ghosh, D. Jana, et al., C3n based heterobilayers: a potential platform to explore optoelectronic and thermoelectric properties, Journal of Physics: Condensed Matter 36 (28) (2024) 285705.DOI
- [60]H. Chen, D.-L. Bao, D. Wang, Y. Que, W. Xiao, G. Qian, H. Guo, J. Sun, Y.-Y. Zhang, S. Du, et al., Fabrication of millimeter-scale, single-crystal one-third-hydrogenated graphene with anisotropic electronic properties, Advanced Materials 30 (32) (2018) 1801838.DOI
- [61]J. Wang, S. Deng, Z. Liu, Z. Liu, The rare two-dimensional materials with dirac cones, National Science Review 2 (1) (2015) 22–39.
- [62]R. Tan, Z. Li, P. Zhou, Z. Zou, W. Li, L. Sun, Dirac semimetals in homogeneous holey carbon nitride monolayers, The Journal of Physical Chemistry C 125 (11) (2021) 6082–6089.DOI
- [63]M. Ghosh, A. Bandyopadhyay, S. Chowdhury, D. Jana, Intriguing features of dirac cones in phagraphene with site specific doping, Applied Surface Science 577 (2022) 151782.DOI
- [64]R. Sarkar, A. Bandyopadhyay, A. Narayan, Non-hermiticity induced exceptional points and skin effect in the haldane model on a dice lattice, Physical Review B 107 (3) (2023) 035403.DOI
- [65]C. L. Kane, E. J. Mele, Quantum spin hall effect in graphene, Physical Review Letters 95 (22) (2005) 226801.
- [66]A. Bandyopadhyay, N. B. Joseph, A. Narayan, Non-linear hall effects: Mechanisms and materials, arXiv preprint arXiv:2401.02282 (2024).DOI
- [67]A. Bandyopadhyay, N. B. Joseph, A. Narayan, Berry curvature dipole and its strain engineering in layered phosphorene, Materials Today Electronics 6 (2023) 100076.DOI
- [68]A. Bandyopadhyay, N. B. Joseph, A. Narayan, Electrically switchable giant berry curvature dipole in silicene, germane and stanene, 2D Materials 9 (3) (2022) 035013.DOI
- [69]D. Xiao, M.-C. Chang, Q. Niu, Berry phase effects on electronic properties, Reviews of modern physics 82 (3) (2010) 1959.
- [70]R. Yu, X. L. Qi, A. Bernevig, Z. Fang, X. Dai, Equivalent expression of z 2 topological invariant for band insulators using the non-abelian berry connection, Physical Review B 84 (7) (2011) 075119.DOI
- [71]A. A. Soluyanov, D. Vanderbilt, Computing topological invariants without inversion symmetry, Physical Review B 83 (23) (2011) 235401.DOI
- [72]L. Fu, C. L. Kane, Time reversal polarization and a z 2 adiabatic spin pump, Physical Review B 74 (19) (2006) 195312.
- [73]D. J. Thouless, M. Kohmoto, M. P. Nightingale, M. den Nijs, Quantized hall conductance in a two-dimensional periodic potential, Physical review letters 49 (6) (1982) 405.
- [74]P. Li, X. Yang, Q.-S. Jiang, Y.-Z. Wu, W. Xun, Built-in electric field and strain tunable valley-related multiple topological phase transitions in vsi x n 4 (x= c, si, ge, sn, pb) monolayers, Physical Review Materials 7 (6) (2023) 064002.DOI
- [75]K. Wang, Y. Li, H. Mei, P. Li, Z.-X. Guo, Quantum anomalous hall and valley quantum anomalous hall effects in two-dimensional d 0 orbital x y monolayers, Physical Review Materials 6 (4) (2022) 044202.
- [76]P. Li, X. Li, W. Zhao, H. Chen, M.-X. Chen, Z.-X. Guo, J. Feng, X.-G. Gong, A. H. MacDonald, Topological dirac states beyond π-orbitals for silicene on sic (0001) surface, Nano Letters 17 (10) (2017) 6195–6202.DOI
- [77]A. J. Heeger, S. Kivelson, J. R. Schrieffer, W.-P. Su, Solitons in conducting polymers, Reviews of Modern Physics 60 (3) (1988) 781.
- [78]L. Li, Z. Xu, S. Chen, Topological phases of generalized su-schrieffer-heeger models, Physical Review B 89 (8) (2014) 085111.
- [79]M. Maffei, A. Dauphin, F. Cardano, M. Lewenstein, P. Massignan, Topological characterization of chiral models through their long time dynamics, New Journal of Physics 20 (1) (2018) 013023.DOI
- [80]M. Parto, S. Wittek, H. Hodaei, G. Harari, M. A. Bandres, J. Ren, M. C. Rechtsman, M. Segev, D. N. Christodoulides, M. Khajavikhan, Edge-mode lasing in 1d topological active arrays, Physical Review Letters 120 (11) (2018) 113901.DOI
- [81]E. J. Meier, F. A. An, B. Gadway, Observation of the topological soliton state in the su-schrieffer-heeger model, Nature communications 7 (1) (2016) 13986.DOI
- [82]Y. Song, M. Chen, X. Xie, X. Liu, J. Li, F. M. Peeters, L. Li, Hydrogenation-controlled band engineering of dumbbell graphene, Nano Energy (2024) 109763.DOI